Report Title:
Global Digital Isolators Market Insights, Forecast to 2025 Published On: October 2018 Pages: 116
Category: Semiconductor and Electronics
Report Overview: This report presents the worldwide Digital Isolators market size (value, production and consumption), splits the breakdown (data status 2013-2018 and forecast to 2025), by manufacturers, region, type and application. This study also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter's Five Forces Analysis. A digital isolator is used to get a digital signal across a galvanic isolation boundary. They serve a similar purpose to optocouplers, except optocouplers are far too slow and error prone for high speed (1MHz+) digital signals. They also use a different coupling technology, usually transformer or RF link as opposed to an optical link. While digital isolators only work with digital signals, they are frequently used to transfer digitised versions of analogue signals. The resulting signal chain will have better bandwidth, accuracy and linearity in comparison to an optocoupler based system. Optocouplers have inherent non-linearity and high unit to unit variations (+- 50% of your signal), so the circuit will need to immune to these variations or each unit individually calibrated. Multiplexing digital channels across a single digital isolator path can be achieved very easily, which in turn simplifies the circuit and results in a net cost saving in-spite of using a more expensive isolation technology. In short, digital isolators are a superior to optocouplers in almost every regard. The technical barriers of Digital Isolators are high, and the Digital Isolators manufacturing bases concentration degree is relatively higher; about 35% of global Digital Isolators are consumption in USA; some of the key players in this market are Silicon Labs, ADI, TI, Broadcom Corporation, Maxim Integrated, Vicor, Rhopoint Components, NVE, ROHM and others. In the past few years, as the main raw material price was relatively stable, with the addition of a sharp increase in production capacity, expected that the Digital Isolators raw material price will be stable in the short term. However, the improvement of energy, transportation costs, and employee wages, will play a significant role in promoting the cost of Digital Isolators. There are companies adding new technology and aims at the cost and quality leadership which shall improve profitability. As the same time, companies are focusing on technological innovation, equipment upgrades, and process improvements, to reduce costs and improve quality. In USA, Digital Isolators manufactures mainly include Silicon Labs, ADI, TI, Broadcom Corporation, Maxim Integrated and others. As the same time, in USA market, some common brands occupy relative large market share, such as Silicon Labs.
24marketreports | International +1 646 781 7170 | www.24marketreports.com