For consideration, email your resume to mfg@cpsprofessionals.com, Fax to 315-458-5899 or call Megan at 315-458-2100. Visit www.cpsprofessionals.com for all of CPS and Professionals Inc.’s most up to date job postings and career information. Contemporary Personnel Staffing is an Equal Opportunity Employer
Aluminum Welder A Syracuse company is looking for an experienced aluminum welder to join their team. As an aluminum welder you will be responsible for joining surfaces, fabricating and repairing parts of metal or other materials using the appropriate welding processes. You will be welding pieces into jigs, holding fixtures while using measuring instruments and hand tools. All applicants must be able to weld aluminum, read a tape measure, read blueprints and be able to lift up to 50 lbs. Candidates must also follow all of CPS's employment guidelines, complete a drug screen and background check, and commit to maintaining an excellent attendance record. PAY RATE: $13.35/hr. HOURS: 2nd shift. Cleaners Looking for a part time position? A premiere area hospital is looking to hire part time cleaners. As a cleaner candidates must be able to perform manual and physical labor. You must have the ability to strip, wax, buff and perform general floor experience. Some tasks include: pick-up and removal of hazardous materials, wash floors, corridors and stairs, and the use of mechanical equipment as well as ladders and scaffolds. This position involves the handling of blood borne pathogens. In order to qualify for this position, all candidates must have previous floor care experience. A high school diploma or equivalent is preferred. At least 6 months of relevant experience is required. Applicants must follow all of CPSs employment guidelines and commit to maintaining an excellent attendance record. Applicants must be willing to comply with our criminal background check & drug/alcohol testing policy. HOURS: 1 @ 11pm-7:30am Fri/Sat, 2 @ 3:30pm-7:30pm Mon-Fri. PAY RATE: $8.50/hr CNC Programmer A Syracuse based company is looking for experienced CNC Programmers. The main job functions for this position would be to program and edit CNC software, set-up, and run and inspect parts in small lots, as well as perform first article inspections on parts coming in from job shops. Our client is looking for candidate with set up, tooling and fixturing experience for both lathes and mills. In order to qualify for the CNC Programming position, candidates must have at least 5 years' experience in precision machining. Candidates must be able to read blue prints, machine set up and fixturing of work pieces, selecting cutting tools, feeds and speeds. Qualified candidates must also be able to use micrometers, dial indicators, and other precision measuring tools to check own work. Experience on engine lathe and vertical mills are required, will also use drill press, band saw, grinder, and other shop equipment as needed. Applicants MUST have CNC programming and editing experience, follow all of CPS's employment guidelines and commit to maintaining an excellent attendance record. PAY RATE: $18/hr. DOE. HOURS: 1st 7am-3:30pm Mon-Thurs or Tues-Fri Die Cutter Operator A Baldwinsville company is looking to bring on multiple die cutter operators. As a die cutter operator you will be responsible for the operation of inkless press machines and feeding paper into the machines. Candidates must have previous die cutter experience. Packaging experience a plus! Candidates must be flexible due to a rotating schedule every 2 weeks. Some Saturdays will be required. Qualified applicants will be expected to follow all of
CPS's employment guidelines, be able to lift up to 50 lbs., complete a background check and drug screen and commit to maintaining an excellent attendance record. HOURS: rotation of all 3 shifts. PAY RATE: $16-20/hr. General Labor – Oneida CPS is looking for general laborers for an upcoming need at an Oneida area plant, openings on second and third shift! Don't miss out on a growing Oneida area manufacturer. Candidates must be able to lift up to 50 lbs and read a tape measure. Candidates applying for this position must be able to be on their feet for extended periods of time. Plastic background is a plus! HOURS: 2nd shift (3pm-11pm) and 3rd shift (11pm-7am) PAY RATE: $10/hr. While we might not have the perfect position for you today, it does not mean that there will not be a position that you qualify for in the future. Gluer Feeder We are currently seeking a gluer feeder for a Syracuse company. As a gluer feeder you will be responsible for feeding cartons into machines keeping the feeder full. Employee must have a strong sense of detail to make sure all labels are correct. The employee must be able to move loads of cartons up to approximately 700 lbs. with a manual lift jack and be able to work in a fast paced environment. The employee must be able to work rotating shifts if needed. They must also be able to work overtime and weekends when needed. Candidates must be able to lift up to 50 lbs. Applicants must follow all of CPS's employment guidelines and commit to maintaining an excellent attendance record. Applicants must be willing to comply with our criminal background check & drug/alcohol testing policy. PAY RATE: $9.50/hr. HOURS: 2nd shift, 2pm-10pm. Machine Maintenance Technician Welch Allyn is currently looking to bring on a Machine Maintenance Technician. This position is responsible for troubleshooting highly technical electrical and mechanical malfunctions or failures in fabrications area systems. General and preventative maintenance on a variety of prod. equip. including automated assembly equip., machine tool controls, communications, motor control and other equip. of a complex nature using electronics. Such systems would include pneumatic, mechanical, hydraulic, computer, chemical and optical components. Proficiency with DMM's, oscilloscopes, and soldering while leveraging your knowledge of electrical terminology. 6-10 years exp. in maintenance repair and control systems. Exp. w/CNC control troubleshooting and automated production equip. is req'd. Knowledge of ISO 9000 and GMP compliance pref'd. Candidates will also be asked to follow all of the CPS employment guidelines and commit to maintaining an excellent attendance record. PAY RATE: $17-20/hr. HOURS: 2nd shift. Machinist A Syracuse company is looking for an experienced machinist to join their team. Applicants would be required to set-up and operate a 3-axis CNC machining centers and lathe, and perform component layouts and final machine part inspection using CMM equipment. Applicants would also be asked to perform preventative maintenance of all machining equipment. In order to apply for the Machinist opening, applicants must have experience with the previously listed equipment, including extensive lathe experience. Applicants must also be able to work effectively in a group environment, follow all of CPS's employment guidelines, complete a drug screen and background check, able to lift up to 50lbs and commit to maintaining an excellent attendance record. PAY RATE: $15. HOURS: 2nd shift. Mechanic Do you have truck mechanic experience? We may have the position for you! A Syracuse company is looking for an experience mechanic. As a mechanic for this company you would be required to perform repairs and
maintenance on trucks, vans, cars and emergency vehicles. You will also be required to do preventative maintenance, oil changes, air/hydraulic brakes, suspensions, transmissions and general maintenance. In order to apply to this position, candidates must have a clean and valid driver's license, as well as a mechanical or trade school certificate. All candidates are required to have their own tools and steel toed work boots. 3-6 years' experience as a truck mechanic is required. Certificate in Electronic Diagnostics and any ASE certificates are preferred. Applicants must follow all of CPSs employment guidelines and commit to maintaining an excellent attendance record. Applicants must be willing to comply with our criminal background check & drug/alcohol testing policy. PAY RATE: $17-20/hr. HOURS: 8am-4:30pm, Mon-Fri. Open Interviews in Elbridge, NY CPS is holding a job fair for manufacturing opportunities on Wednesday, May 2, from 9am-12pm at the Elbridge Library on Rt. 5. We are currently in need for 1st, 2nd and 3rd shifts. All interested applicants must bring 2 forms of ID with them. In order to apply for positions, candidates must submit to a background check and a drug test. Applicants must also have a high school diploma or a general education diploma. Candidates will also be asked to follow all of CPS’s employment guidelines and commit to maintaining an excellent attendance record. For further details, please call our office at 315-458-2100. We look forward to seeing you! Sanitation Assistant A food manufacturing company is in need of a sanitation assistant. As a sanitation assistant you will be responsible for cleaning and sanitizing machinery, equipment and the facility. You will do cleaning such as: washing, sweeping, mopping and applying cleaning agents. This position will also require some dismantling and reassembling of equipment. In order to apply for this position, all candidates must have previous experience in sanitation and in food manufacturing setting. All applicants must have an understanding of what cleaning agents must be used, why they are used and know the proper amounts that need to be used. High school diploma or equivalent is required. Qualified applicants will be expected to follow all of CPS's employment guidelines, be able to lift up to 50 lbs., complete a background check and drug test and commit to maintaining an excellent attendance record. PAY RATE: $9-10/hr. HOURS: 2nd shift (4pm-1am). Shop Utility A Syracuse based company is looking for a shop utility employee. As a shop utility employee you will be responsible for operating various machines. All candidates must have experience with calipers and micrometers. Candidates must also have mechanical ability and hand tool experience. Basic math skill and measuring experience are a must! Qualified applicants will be expected to follow all of CPS's employment guidelines, complete a background check and drug test and commit to maintaining an excellent attendance record. Training will take place on 1st shift for one month then you will move to 2nd shift. PAY RATE: $11.50/hr. HOURS: 2nd shift 3pm-11pm Monday-Friday. Temp Mechanical Assembler An established East Syracuse company is looking for a temporary, experienced mechanical assembler. As a mechanical assembler you will be responsible for assembling Vortex/Service Tool products including assembly of mechanical components, perform simple functional tests during assembly, and package final product with appropriate accessories. A high school diploma or GED is required. Candidates must have the ability to read and follow written and verbal instructions. 1-2 years' experience in mechanical and/or electrical assembly is required. Previous electrical repair and troubleshooting experience preferred. Candidates must have excellent vision and manual dexterity. PAY RATE: $9.50/hr. HOURS: 1st shift. Warehouse/Assembler
A Syracuse company is looking for a full time warehouse/assembler. The main duties of this position will be assembling clothing displays. This includes a lot of general labor. All candidates must have carpentry skills and good use of hand tools. This position will require overtime and travel once hired on. Candidates must be detail oriented and have 2-4 years' experience doing warehouse, assembly or carpentry. All candidates must have a clean driver's license. Qualified applicants will be expected to follow all of CPS's employment guidelines, complete a drug test and commit to maintaining an excellent attendance record. HOURS: 1st shift 8:30am-5pm PAY RATE: $10/hr. Warehouse/Packager A local company is seeking a temporary packager and warehouse associate. Qualified candidates would have warehouse experience, good organizational skills, strong attention to detail and be able to lift up to 50 lbs. Responsibilities for this position will include assembly and disassembly of cabinetry and walls. Candidates must have knowledge of hand tools. 5 years of related experience is required. Applicants must be willing to comply with our criminal background check, DMV check & drug/alcohol testing policy. HOURS: 8am-4:30pm, OT required! PAY RATE: $10-12/hr.