ACO Inox higijenski slivnici

ACO gully ACO stainless steel drainage

ACO Product catalogue ACO gully • ACO gully 142 • ACO gully 157 • ACO gully 218

ACO gully

Content General introduction Introduction Why stainless steel?

Why ACO stainless steel gullies?

Surface treatment of stainless steel Hygienic standards Slip resistance Certification Fire rating

page 3 3 3 3 4 4 4 4

System overview Characteristics

6

Features and benefits ACO gully features & benefits Benefits Friction ring

8 9 10

Gully guide Gully guide

11

Family range ACO ACO ACO ACO ACO ACO

gully gully gully gully gully gully

142 142 157 157 218 218

– – – – – –

fixed height – horizontal and vertical outlet telescopic – horizontal and vertical outlet fixed height – horizontal and vertical outlet telescopic – horizontal and vertical outlet fixed height – horizontal and vertical outlet telescopic – horizontal and vertical outlet

14 16 24 26 36 38

Flow rates Flow rates

45

Cleaning methods 2

Cleaning methods Conclusion

47 47

Installation recommendations Telescopic flanged gully installed in suspended concrete slab construction Telescopic flanged gully and raising flanged piece installed in suspended concrete slab construction Telescopic flanged gully and raising piece installed in solid concrete floor Telescopic flanged gully installed in solid concrete floor Fixed height gully installed in solid concrete floor

48 48 49 49 50

General introduction

General introduction Introduction Applications for ACO stainless steel gullies include: I Kitchens I Food processing factories I Brewing, bottling and canning plant I Chilled warehouses I Laboratories I Chemical and pharmaceutical industries I Leisure industries I Human and animal healthcare ACO stainless steel gullies are used in applications where hygienic, corrosion resistance and durable performance are essential.

Why stainless steel?

Stainless steel has the following unique advantages: I Highly corrosion resistant I Non-porous, easy to clean and disinfect I Aesthetically pleasing I Resistant to temperature extremes and thermal shock I Coefficient of linear expansion similar to concrete I 100% recyclable material All ACO gullies are manufactured from austenitic stainless steel grades 1.4301 (304) or 1.4404 (316L) to EN 10088.

EN 10088 1.4301 1.4404

AISI 304 316L

Table 1 Why ACO stainless steel gullies?

As the largest producer of stainless steel drainage systems ACO has the knowledge, experience and expertise to offer the optimal

drainage solutions for every application.

Therefore ACO offers the designer the freedom to choose from a standard range of products as well as bespoke solutions to suit any application.

Also the ACO stainless steel gullies can be combined with ACO’s linear stainless steel drainage channel system.

Surface treatment of stainless steel The process of cutting, forming and welding of stainless steel will introduce impurities into the surface of the material and unless the appropriate action is taken, the material will begin to corrode and ultimately fail in service.

Therefore after fabrication into the final product, it is vital that the stainless steel material is treated with the correct surface treatment to ensure the material is fully corrosion resistant.

By applying pickle passivation as the primary surface treatment, the corrosion resistance of stainless steel can be fully restored to its original state, ensuring long and reliable life performance together with the required aesthetic appearance.

Finishes used by ACO include: I Pickle passivation (acid treatment) All ACO gullies are pickle passivated by immersing them in a series of acid baths.

This is a fundamental requirement for removing embedded iron particulates introduced in the fabrication process and also restoring the chromium depleted regions generated by the welding process. ACO has one of the largest and modern pickle passivation installations in Europe which ensures the optimum corrosion resistance of our products.

I Electropolishing (electrochemical process) After pickle passivation, some products are then immersed in an electrolytic fluid in which the products become the anode of a direct current electrical circuit. This process is characterized by the selective attack on the surface of the components whereby upstanding roughness is preferentially dissolved and will yield a progressively smoother, brighter surface.

I Linishing (mechanical process) ACO gullies have a linished upper edge for esthetical reasons

3

General introduction

Hygienic standards In order to maintain a clean and sustainable hygienic environment within the food processing area, is therefore essential that drainage elements should be designed and manufactured to rigorous standards to ensure bacteria traps are minimised.

All ACO gullies are designed for optimum hygiene performance taking into account guidelines described in EN 1672 and EN ISO 14159 to minimise hygiene risk.

accidents can easily occur involving high temperature foodstuffs and cooking surfaces.

For applications where the potential for slipping is increased, enhanced slip resistant gratings should be considered. From this reason ACO gully portfolio includes range of slip resistant grates.

Certification ACO stainless steel gullies are manufactured and tested in accordance with EN 1253 – Gullies in buildings.

Slip resistance The consequences of slips in food processing and kitchen areas can be very serious as Hygiene risk according to EN 1672 and EN ISO 14159

Acceptable according to EN 1672 and EN ISO 14159

Not drainable design

Drainable design

Not drainable design

Drainable design

Continously welded lap joint

Continously welded butt

4

Fire rating Requirements imposed by the Building Supervisory Authority ACO has tested the floor drain range ACO gully 142 and 218 with odour seal according to DIN 4102 and has passed the approval test for fire protection classes R 30 - R 120. For the horizontal floor drains, MPA NRW, Dept. Erwitte granted the “Test Certification of the Building Supervisory Authority” No: P-MPA-E-02-005. For the vertical floor drains, we received the “official approval of the Building Supervisory Authority” No.: Z-19.17-1527.

The floor drains with a socket inclination of 1.5° (gullies with horizontal outlet) The floor drains can easily be directly inserted into the ceiling without a fire protective kit, if the following conditions are met: I Minimum distance of 600 mm to the soil pipe I Lining the ceiling duct in the area of the downpipe in R 30 - R 120 quality according to the required fire resistance duration of the solid ceiling In floor drains with a socket inclination of 90° (gullies with vertical outlet) I in solid ceilings (minimum ceiling thickness of 100 mm for DN 70 and 150 mm for DN 100) with core bores using the Fit-In Installation kit. This is a certified closure is thereby achieved without having to mortar the floor drain. The official approval Abz No. Z-19.17-1527 was issued by DIBt Berlin for this version. The gap between the fit-in and the ceiling must not be at backfilled I in solid ceilings by fully embedding (minimum ceiling thickness of 150 mm for DN 70 and 200 mm for DN 100) All of the mentioned drain pipes can be connected to the ACO fire protection floor drains with fire protection kit regardless of the pipe material, e.g. non-combustible cast iron drain pipes SML (building material class A1) or plastic drain pipes (building material class B1/B2).

Table 2

Welded in corners

Round internal corner

Welded in corners

Welded in smooth area

General introduction

ACO gully 142/218 - horizontal No fire protection required R 120 (DIN 4102)

ACO gully 142/218 - vertical with fire protection bellshape foul air trap R 120 (DIN 4102) with fit – in R90 (DIN 4102)

Installation kit Fit-In for mortaless installation in core bores such as a drain pipe, opening R 30–R 120 e. g. supply pipes for heating/sanitary, pipe opening R 30–R 120

DN

such as a drain, Building material class A1/B1/B2

Thickness of the solid celling with installed floor drains R 120

hickness of the solid celling with core bore and Fit-in R 90

Socket Inclination

H

H

Horizontal

200 mm

–

Vertical

150 mm

100 mm

Horizontal

200 mm

–

Vertical

200 mm

150 mm

70

100

Table 3

5

System overview

System overview Characteristics ACO stainless steel gullies are designed to be used in commercial applications where hygiene, durability and performance requirements are paramount. ACO gullies are available in a number of versions featuring different flow rates, grating designs, sizes and spigot outlet diameters to suit various applications. The floor

6

construction and depth together with the use of any waterproofing membrane play an important role in the selection of the appropriate type of gully. ACO offers 4 generic gully configurations as shown in the table below.

Fixed height gullies are convenient, freestanding units suitable for cementitious, resin or tiled floors. Telescopic gullies can be

installed either with ACO gully tops or with ACO stainless steel linear drainage channels in most flooring constructions, including floors with waterproofing membranes.

All ACO gullies are available with vertical or horizontal spigot outlets.

ACO gully

Fixed height gullies

I Fixed gully height I No waterproofing membrane connection I No seepage drainage facility

Telescopic gullies

With location flange

With adhesive bonding flange

I I I I

Friction lock height adjustment 360ยบ rotatable top No membrane connection No seepage drainage

I Friction lock height adjustment I 360ยบ rotatable top I Adhesive bonding flange for waterproofing layer I Seepage drainage or sealed solution easily configured

7

With mechanical clamping flange

Table 4

I Friction lock height adjustment I 360ยบ rotatable top I Mechanical clamping flange for waterproofing layer I Seepage drainage or sealed solution easily configured

Features and benefits

Features and benefits

10

ACO gully features & benefits

3

1

9

6 8 7

8

1

Edge in-fill significantly improves hygiene and durability

2

Large radii for easy cleaning

3

Deep-drawn body ensures smooth contours eliminating crevices.

4

Friction ring reduces installation time

5

Friction ring easily convertible for membrane drainage

6

Foul air trap design minimises evaporation rate and aerosol mobility

7

Dry sump design, no water retention in sump

8

Gully flow rate and self-cleansing exceeds requirements of EN 1253

9

Fully removable foul air trap and support for easy cleaning

10

Deep-drawn stainless steel silt basket eliminates crevices

Features and benefits

1 2

4

5

9

6

7

8

Benefits Specifier benefits I Hygienic design following EN 1672 and EN ISO 14159 requirements I Stainless steel construction for durability and long life I Gully top edge infill supplied as standard for hygiene and durability I Wide range of gratings for all load class applications I Slip resistant gratings available for added user safety I Low construction height I Fully compliant to EN 1253 I Reliable waterproofing membrane connection options I Waterproofing membrane seepage drainage provision I Suitable for all floor types including vinyl flooring

9

Installing contractor benefits I Low construction height I Friction lock telescopic adjustment reduces installation time I Gully levelling facilities I Quick and reliable flange connection for waterproofing membranes I Friction ring converts easily to membrane seepage drainage I Gully top edge infill for durability and eliminates time-consuming back filling I Easy installation for all floor types – ceramic tiles, cementitious and resin screeds, vinyl

User benefits I Fully compliant to EN 1253 I Hygienic design following EN 1672 and EN ISO 14159 requirements I Slip resistant gratings available for added user safety I Easy and low cost cleaning I Stainless steel construction for durability and long life I Optional silt basket I Wide range of gratings I Gully top edge infill for hygiene and durability I Positive membrane drainage for enhanced construction life

Features and benefits

Friction ring

Sealing function

Easy removable sealing ring

Removal of the red O-ring opens the water drainage ways

10

Drainage function

Gully guide

Gully guide This guide helps the designer to select the appropriate gully for each particular application by following six simple steps.

Step 1 Depending on the composition of floor construction the appropriate type of the gully should be selected.

No waterproofing membrane Fixed height

I Fixed height I Easy installation I Suitable for areas where waterproofing is independent of the gully body

Table 5

Telescopic adjustable – location flange

I Used in combinations with gully tops or linear drainage channels I Adjustable height and rotation of the gully top I Ideal for applications where final floor height unknown I Suitable for areas where waterproofing is independent of the gully body

Waterproofing membrane present Telescopic adjustable – adhesive bonding flange

I Waterproofing connection by welding or adhesive bonding I Usable with gully tops or linear drainage channels I Adjustable height and full rotation of the gully top

Telescopic adjustable – mechanical clamping flange

I Waterproofing connection by mechanical clamping flange I Usable with gully tops or linear drainage channels I Adjustable height and full rotation of the gully top 11

Gully guide

Step 2 If required, select the raising piece for floor constructions with double waterproofing layers or for increasing the overall height of the gully.

Applicable only for telescopic adjustable gullies.

No waterproofing membrane connected to raising piece

Waterproofing membrane connected to raising piece

Telescopic adjustable – location flange

I Usable with gully tops or linear drainage channels I Adjustable height and rotation I Increases overall height with 95 mm

Telescopic adjustable – adhesive bonding flange

I Waterproofing connection by welding or adhesive bonding I Usable with gully tops or linear drainage I Adjustable height and rotation I Increases overall height with 95 mm

Telescopic adjustable – mechanical clamping flange

I Waterproofing connection by mechanical clamping flange I Usable with gully tops or linear drainage channels I Adjustable height and rotation I Increases overall height with 95 mm

Table 6 Step 3 Establish the location, size, orientation and invert depth (if appropriate) of slab/screed pipework as this will determine the type of gully.

Vertical outlet

Horizontal outlet

12

Table 7

vertical outlet flow rate [l/s]

142

Horizontal outlet flow [rate l/s]

Step 4 An important factor in the selection of gully is the required flow rate. Flow rate is affected by several factors such as the size and height of the gully body, use of silt basket and height of the top.

142

157 218

157 218

DN/OD 70/75 mm 100/110 mm 70/75 mm 100/110 mm 100/110 mm 150/160 mm 70/75 mm 100/110 mm 70/75 mm 100/110 mm 100/110 mm

200×200 1.4 1.5 2.7 3.5 1.4 1.5 2.6 2.6 -

Fixed height gullies 250×250 300×300 2.7 3.5 5.0 5.0 2.6 0 2.6 0 -

Telescopic adjustable gullies* 200×200 250×250 300×300 1.5–1.8 1.6–2.0 2.6–3.3 2.6–3.3 3.5–4.4 3.5–4.4 5.0–6.2 5.0–6.2 1.4–1.8 1.6–2.0 2.6–3.3 2.6–3.3 2.8–4.4 2.8–4.4 – 4.4–5.4

Flow rate performance without silt basket (flow rates with empty silt basket are approximately 15% lower than the values stated) * For detailed flow rates see page 29 Table 8

Gully guide

Step 5 For the collection of solid particles, the gully can be fitted with an optional silt basket.

Gully spigot outlet position Vertical Horizontal & vertical

"Gully Body Dia 142 Silt Basket Capacity (litres)" 0.4 0.3

"Gully Body Dia 157 Silt Basket Capacity (litres)" 0.6 0.3

"Gully Body Dia 218 Silt Basket Capacity (litres)" 1.4 0.7

Table 9 Step 6 The final floor finish determines the gully top selection.

Ceramic/screed

Thin-bed

Vinyl/flexible

For tiled, resin screed or cementitious flooring

For thin-bed applications

Mechanical clamp for reliable connection to vinyl flooring

Table 10 Step 7 For the choice of the appropriate grating following properties have to be considered: I Traffic load I Hygiene I Slip resistance

Mesh grating

Hygiene Slip resistance Load classes 200×200 250×250 300×300

Ladder grating

Slot cover

Heelsafe

ARLA grating

Vulcano grating

Antislip + +++++

Plain + +++

Plain + +

Antislip +++++ +++

Plain +++++ +

Plain +++ +

Plain +++ +

Antislip +++++ ++++

Antislip +++ +++++

L15 L15 L15

L15 L15 L15

L15 L15 L15

M125 M125 M125

C250 C250 C250

M125 M125 M125

L15 L15 L15

L15 L15 L15

L15 L15 L15

:(

+= +++++ =

Quadrato

:)

Load class L15, M125 acc. to EN 1253 Load class C250 acc. to EN 124 Table 11

13

Family range / ACO gully 142

Family range ACO gully 142 – fixed height – horizontal and vertical outlet I Hygienic design including large radii formed contours, deep-drawn components and minimal welds to minimize crevices and bacteria traps according to EN 1672 and EN ISO 14159 I Stainless steel gully fully compliant to EN 1253 I Available in 1.4301 (304) or 1.4404 (316L) grades of stainless steel

I Dry sump design ensures no standing waste water in gully base I Fully removable and easily cleaned stainless steel foul air trap (FAT) I Removable hygienic and corrosion resistant Nitrile FAT support I High flow rate gullies from 1.4 l/s (DN 70) – 1.5 l/s (DN 100) I Gully top frame size: 200×200 mm

I Outlet spigot DN 70/100 (75 mm or 110 mm OD) I Wide range of gratings to Load Class L15 – M125 (EN 1253) or C250 (EN 124) I Optional high volume silt basket 0.3 litre (horizontal outlet) or 0.4 litre (vertical outlet)

ACO gully 142 – fixed height – vertical outlet Drawing

Top size

DN/ OD

FAT

Material

Part Nr.

1.4301

414700

1.4404

414800

1.4301

414701

1.4404

414801

1.4301

414702

1.4404

414802

1.4301

414703

1.4404

414803

1.4301

414744

1.4404

414844

1.4301

414745

1.4404

414845

without FAT 135

25

Picture

70/75 mm

98

233

200×200 mm

with standard FAT

200

135

25

without FAT 200×200 mm

100/110 mm

101

with standard FAT

300 20 136

25

200

14

70/75 mm

with standard FAT

97

233

Thin bed 200×200 mm

300

102

236

134

Table 12

25

20

200

Thin bed 200×200 mm

100/110 mm

with standard FAT

Family range / ACO gully 142

ACO gully 142 – fixed height – horizontal outlet Picture

Drawing

Top size

DN/ OD

FAT

Part Nr.

1.4301

414704

1.4404

414804

1.4301

414705

1.4404

414805

1.4301

414706

1.4404

414806

1.4301

414707

1.4404

414807

1.4301

414746

1.4404

414846

1.4301

414747

1.4404

414847

without FAT 200Ă—200 mm

70/75 mm

75

143 137

105

25

200

with standard FAT

200

120

25

without FAT 200Ă—200 mm

110

137

175

Material

100/110 mm with standard FAT

300 20 138

106

25

200

Thin-bed 200Ă—200 mm

70/75 mm

with standard FAT

149

300 20 138

120

25

200

Thin-bed 200Ă—200 mm

100/110 mm

with standard FAT

149

Table 13 15

Family range / ACO gully 142

ACO gully 142 – telescopic – horizontal and vertical outlet I Hygienic design including large radii formed contours, deep-drawn components and minimal welds to minimize crevices and bacteria traps according to EN 1672 and EN ISO 14159 I Stainless steel gully fully compliant to EN 1253 I Available in 1.4301 (304) or 1.4404 (316L) grades of stainless steel I Dry sump design ensures no standing waste water in gully base

16

I Fully removable and easily cleaned stainless steel foul air trap (FAT) I Removable hygienic and corrosion resistant Nitrile FAT support I High flow rate gullies from 1,4 l/s (DN 70) – 2,0 l/s (DN 100) I Friction lock adjustable and 360° rotatable gully top I Gully top frame size: 200×200 mm I Outlet spigot DN 70/100 (75 mm or 110 mm OD)

I Wide range of gratings to load class L15 – M125 (EN 1253) or C250 (EN 124) I Optional high volume silt basket 0.3 litre (horizontal outlet) or 0.4 litre (vertical outlet) I Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp

Family range / ACO gully 142

ACO gully 142 – telescopic – horizontal and vertical outlet Picture

Drawing

Flange type

DN/ OD

FAT

164

Material

Part Nr.

1.4301

414708

1.4404

414808

1.4301

414709

1.4404

414809

1.4301

414710

1.4404

414810

1.4301

414711

1.4404

414811

1.4301

414712

1.4404

414812

1.4301

414713

1.4404

414813

1.4301

414714

1.4404

414814

1.4301

414715

1.4404

414815

1.4301

414716

1.4404

414816

1.4301

414717

1.4404

414817

1.4301

414718

1.4404

414818

1.4301

414719

1.4404

414819

109

without FAT Location flange

70/75 mm

96

with standard FAT

75

344

Adhesive Bonding Flange

70/75 mm

96

109

without FAT

with standard FAT

75

344

Mechanical Clamping Flange

70/75 mm

96

109

without FAT

with standard FAT

142,5

164

106

without FAT 100/110 mm

102

Location Flange

with standard FAT

110

344

17

102

106

without FAT Adhesive Bonding Flange

100/110 mm with standard FAT

110

344

102

106

without FAT

110

Table 15

Mechanical Clamping Flange

100/110 mm with standard FAT

Family range / ACO gully 142

ACO gully 142 – telescopic - horizontal outlet Picture

Drawing

Flange type

DN/ OD

164

FAT

Material

Part Nr.

1.4301

414720

1.4404

414820

1.4301

414721

1.4404

414821

1.4301

414722

1.4404

414822

1.4301

414723

1.4404

414823

1.4301

414724

1.4404

414824

1.4301

414725

1.4404

414825

1.4301

414726

1.4404

414826

1.4301

414727

1.4404

414827

1.4301

414728

1.4404

414828

1.4301

414729

1.4404

414829

1.4301

414730

1.4404

414830

1.4301

414731

1.4404

414831

without FAT

75

115 109

77

Location flange

70/75 mm with standard FAT

164

without FAT

75

115 109

77

344

Adhesive Bonding Flange

70/75 mm with standard FAT

149

without FAT

75

115 109

77

344

Mechanical Clamping Flange

70/75 mm with standard FAT

149

164

110

147 109

92

without FAT Location flange

100/110 mm with standard FAT

181

18

without FAT 92 110

109

147

344

Adhesive Bonding Flange

100/110 mm with standard FAT

181

without FAT Mechanical Clamping Flange

109

147

344

181

Table 16

100/110 mm with standard FAT

Family range / ACO gully 142

ACO gully 142 – telescopic – gully tops Picture

Drawing

Flange type

Height of grate

45

80

200

Square top 200×200

Material

Part Nr.

1.4301

414732

1.4404

414832

1.4301

414734

1.4404

414834

1.4301

414735

1.4404

414835

Plastic

414903

25

125

20

Thin-bed top 200×200

45

25

300 200

25

125

20

Thin-bed top drainage 200×200

45

25

300 200

25

125

20

Plastic top with stainless steel grating 150x150 mm (K3)

45

25

300 200

5

125

19 85–125

MEKU top with stainless steel grating 150x150 mm (K3)

5

Plastic

414904

115

148

Square top with stainless steel grating 150x150 mm (K3)

5

Plastic

414905

125

148

125

Table 17

Family range / ACO gully 142

ACO gully 142 – telescopic – gully tops Picture

Drawing

125

200 150

Flange type

Height of grate

Material

Part Nr.

PVC top with stainless steel grating 150x150 mm (K3)

5

Plastic

414906

Plastic thin-bed top with stainless steel grating 150x150 mm (K3)

5

Plastic

414907

Square top with sanded flange and stainless steel grating 150x150 mm (K3)

5

1.4301

414909

125

91

8/11

148

115

271 148 140

20

125

125

Table 18

20

Family range / ACO gully 142

ACO gully 142 – telescopic – raising pieces Picture

Drawing

Raising piece type

164

Material

Part Nr.

1.4301

414736

1.4404

414836

1.4301

414737

1.4404

414837

1.4301

414738

1.4404

414838

Plastic

2040.00.00

75 44 31

Raising piece with location flange 125

344

75 44 31

Raising piece with adhesive bonding flange 125

344

75 44 31

Raising piece with mechanical clamping flange

178

17

125

Extension

125

Table 19 21

Family range / ACO gully 142

ACO gully 142 – accessories and spares Picture

Drawing

Name

141,5

Material

Part Nr.

1.4301

414739

1.4404

414839

1.4301

414740

1.4404

414840

1.4301

414741

1.4404

414841

Friction ring

Nitrile

414742

Standard foul air trap support

Nitrile

414743

45

Vertical outlet gully silt basket 0.4 litre capacity

141,5 30

Horizontal outlet gully silt basket 0.3 litre capacity

100 87

Standard foul air trap 92

25

164

27

140

150

໅141

91 215

70 +1

22

Installation kit Fit-In I Non-flammable in accordance with building materials class A1 I For mortar-less installation in core bores: 225 mm I With/without fireprotection set I Dimensions Fit-In I Diameter: 215 mm I Height: 150 mm

9390.07.40

Bellshape foul air trap

Plastic

5180.10.15

Fire protective protection bellshape foul air trap* I Fire and smoke seal for additional fire protection of drain bodies

Plastic

5180.20.15

Spare roll ring for bellshape FAT

Nitrile

5180.10.26

ca.210

70

໅85

48 10

* Can be used for gullies with vertical outlet only.

Table 20

Family range / ACO gully 142

ACO gully 142 – gratings for frame 200×200 mm Picture

Drawing

Name

Load class

Surface

Material

Part Nr.

1.4301

408090

1.4404

408190

1.4301

408091

1.4404

408191

1.4301

408092

1.4404

408192

1.4301

408093

1.4404

408193

1.4301

408020

1.4404

408120

Plain

1.4301

408043

Plain

1.4404

408143

1.4301

408022

1.4404

408122

1.4301

408094

1.4404

408194

1.4301

408023

1.4404

408123

1.4301

408021

1.4404

408121

Antislip

168

168

Mesh grating

L15 Plain

168

168

Quadrato grating

L15

Plain

Antislip

168

168

Ladder grating

M125 Plain

168

168

Ladder grating

C250

168

168

Heelsafe grating

L15

Plain

168

168

Volcano grating

L15

Antislip

Arla grating

L15

Antislip

64

168

64

168

168 148

168 148

Table 21

Slot cover

M125

Plain

23

Family range / ACO gully 157

Family range ACO gully 157 – fixed height – horizontal and vertical outlet I Hygienic design including large radii formed contours, deep-drawn components and minimal welds to minimize crevices and bacteria traps according to EN 1672 and EN ISO 14159 I Stainless steel gully fully compliant to EN 1253 I Available in 1.4301 (304) or 1.4404 (316L) grades of stainless steel

24

I Dry sump design ensures no standing waste water in gully base I Fully removable and easily cleaned stainless steel foul air trap (FAT) I Removable hygienic and corrosion resistant Nitrile FAT support I High flow rate gullies from 2.75 l/s (DN 70) – 3.50 l/s (DN 100)

I Gully top frame size: 200×200 mm or 250×250 mm I Outlet spigot DN 70/100 (75 mm or 110 mm OD) I Wide range of gratings to Load Class L15 – M125 (EN 1253) or C250 (EN 124) I Optional high volume silt basket 0.3 litre (horizontal outlet) or 0.6 litre (vertical outlet)

Family range / ACO gully 157

ACO gully 157 – fixed height – vertical outlet Picture

Drawing

Top size

DN/OD

FAT

Material

Part Nr.

1.4301

408000

1.4404

408100

1.4301

408001

1.4404

408101

1.4301

408016

1.4404

408116

1.4301

408017

1.4404

408117

1.4301

408002

1.4404

408102

1.4301

408003

1.4404

408103

1.4301

408018

1.4404

408118

1.4301

408019

1.4404

408119

1.4301

408047

1.4404

408147

1.4301

408099

1.4404

408199

25

200

193

Without FAT 200×200 mm

70/75 mm

90

With FAT 75

30

250

198

Without FAT 250×250 mm

70/75 mm

90

With FAT 75 200

193

Without FAT 200×200 mm

100/110 mm

99

With FAT 110

250

198

Without FAT 100/110 mm

99

250×250 mm

With FAT 110

20

25

300 200

91

194

Thin bed 200x200 mm

70/75 mm

with FAT

75

20 194 293 99

Table 22

25

300 200

Thin bed 200x200 mm

100/110 mm

with FAT

25

Family range / ACO gully 157

ACO gully 157 – fixed height – horizontal outlet Picture

Drawing

Top size

DN/OD

FAT

200

Material

Part Nr.

1.4301

408008

1.4404

408108

1.4301

408009

1.4404

408109

1.4301

408024

1.4404

408124

1.4301

408025

1.4404

408125

1.4301

408010

1.4404

408110

1.4301

408011

1.4404

408111

200×200 mm

70/75 mm

75

169

131,5

25

Without FAT

With FAT 193

250

250×250 mm

70/75 mm

75

174

136,5

30

Without FAT

With FAT 193

200

200×200 mm

100/110 mm

110

169

120

25

Without FAT

With FAT 168

Table 23 – part A

26

Table continues on the next page.

Family range / ACO gully 157

ACO gully 157 – fixed height – horizontal outlet Picture

Drawing

Top size

DN/OD

FAT

250

Material

Part Nr.

1.4301

408026

1.4404

408126

1.4301

408027

1.4404

408127

1.4301

408014

1.4404

408114

1.4301

408015

1.4404

408115

250×250 mm

100/110 mm

110

174

125

30

Without FAT

With FAT 168

169

132

20

25

300 200

Thin-bed 200x200 mm

70/75 mm

with FAT

168

175 169

120

20

25

300 200

Thin-bed 200x200 mm

100/110 mm

with FAT

169

Table 23 – part B

27

Family range / ACO gully 157

ACO gully 157 – telescopic – horizontal and vertical outlet I Hygienic design including large radii formed contours, deep-drawn components and minimal welds to minimize crevices and bacteria traps according to EN 1672 and EN ISO 14159 I Stainless steel gully fully compliant to EN 1253 I Available in 1.4301 (304) or 1.4404 (316L) grades of stainless steel I Dry sump design ensures no standing waste water in gully base

28

I Fully removable and easily cleaned stainless steel foul air trap (FAT) I Removable hygienic and corrosion resistant Nitrile FAT support I High flow rate gullies from 2.75 l/s (DN 70) – 3.50 l/s (DN 100) I Friction lock adjustable and 360º rotatable gully top I Gully top frame size: 200×200 mm or 250×250 mm

I Outlet spigot DN 70/100 (75 mm or 110 mm OD) I Wide range of gratings to load class L15 – M125 (EN 1253) or C250 (EN 124) I Optional high volume silt basket 0.3 litre (horizontal outlet) or 0.6 litre (vertical outlet) I Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp

Family range / ACO gully 157

ACO gully 157 – telescopic – vertical outlet Picture

Drawing

Flange type

DN/OD

FAT

181

Material

Part Nr.

1.4301

408048

1.4404

408148

1.4301

408049

1.4404

408149

1.4301

408050

1.4404

408150

1.4301

408051

1.4404

408151

1.4301

408052

1.4404

408152

1.4301

408053

1.4404

408153

1.4301

408054

1.4404

408154

1.4301

408055

1.4404

408155

1.4301

408056

1.4404

408156

1.4301

408057

1.4404

408157

1.4301

408058

1.4404

408158

1.4301

408059

1.4404

408159

170

Without FAT Location flange

70/75 mm

84

With FAT 75 357

170

Without FAT Adhesive bonding flange

70/75 mm

84

With FAT 75 357

Without FAT 170

Mechanical clamping flange

70/75 mm

84

With FAT 75 181

170

Without FAT 100/110 mm

93

Location flange

With FAT 110 357

29

170

Without FAT Adhesive bonding flange

100/110 mm

93

With FAT 110 357

Without FAT 170

Mechanical clamping flange

100/110 mm

93

With FAT 110

Table 24

Table continues on the next page.

Family range / ACO gully 157

ACO gully 157 – telescopic – horizontal outlet Picture

Drawing

Flange type

DN/OD

FAT

1.4301

408072

1.4404

408172

1.4301

408073

1.4404

408173

1.4301

408074

1.4404

408174

1.4301

408075

1.4404

408175

1.4301

408076

1.4404

408176

1.4301

408077

1.4404

408177

1.4301

408078

1.4404

408178

1.4301

408079

1.4404

408179

1.4301

408080

1.4404

408180

1.4301

408081

1.4404

408181

1.4301

408082

1.4404

408182

1.4301

408083

1.4404

408183

70/75 mm

75

147

110

Location flange

With FAT

193

357

75

147

110

Without FAT Adhesive bonding flange

70/75 mm With FAT

193

357

75

147

110

Without FAT Mechanical clamping flange

70/75 mm With FAT

193

Without FAT Location flange

110

147

98

181

100/110 mm With FAT

168

357

110

147

98

Without FAT Adhesive bonding flange

100/110 mm With FAT

168

357

110

147

98

Without FAT

168

Table 25

Part Nr.

Without FAT

181

30

Material

Mechanical clamping flange

100/110 mm With FAT

Family range / ACO gully 157

ACO gully 157 – telescopic – gully tops Picture

Drawing

Top type

53

99

25

200

142

53

104

30

250

142

Square top 200×200 mm (concrete, tiled and resin screed floors)

Square top 250×250 mm (concrete, tiled and resin screed floors)

Height of grate

1.4301

408208

1.4404

408218

1.4301

408248

1.4404

408258

1.4301

408240

1.4404

408250

1.4301

408241

1.4404

408251

1.4301

408244

1.4404

408254

1.4301

408245

1.4404

408255

1.4301

408246

30 mm

30 mm

53

106

Part Nr.

25 mm

289

Vinyl floor top

Material

142

200

25 mm

53

99

Thin-bed top 142

53

99

200

Thin-bed top – seepage drainage

25 mm

142

250

30 mm

53

104,5

Thin-bed top 142

53

104,5

250

142

Table 26

Thin-bed top – seepage drainage

30 mm 1.4404

408256

31

Family range / ACO gully 157

ACO gully 157 – telescopic – raising pieces Picture

Drawing

Raising piece type

Material

Part Nr.

1.4301

408249

1.4404

408259

1.4301

408206

1.4404

408216

1.4301

408207

1.4404

408217

182

53

96

Raising piece with location flange 142

53

96

357

Raising piece with adhesive bonding flange

142

53

96

357

Raising piece with mechanical clamping flange with screws

142

Table 27 ACO gully 157 – accessories and spares Picture

Drawing

Name

Material

Part Nr.

1.4301

408202

1.4404

408212

1.4301

408203

1.4404

408213

1.4301

408200

1.4404

408210

Standard foul air trap support

Nitrile

408201

Friction ring installation set

Nitrile

408205

156 50

Vertical outlet gully silt basket 0.6 litre capacity

32

Horizontal outlet gully silt basket 0.3 litre capacity

26

156

105

127

Standard foul air trap

21

156

24

184

Table 28

Family range / ACO gully 157

ACO gully 157 – gratings for frame 200×200 mm Picture

Drawing

Name

Load class

Surface

Material

Part Nr.

1.4301

408090

1.4404

408190

1.4301

408091

1.4404

408191

1.4301

408092

1.4404

408192

1.4301

408093

1.4404

408193

1.4301

408020

1.4404

408120

Plain

1.4301

408043

Plain

1.4404

408143

1.4301

408022

1.4404

408122

1.4301

408094

1.4404

408194

1.4301

408023

1.4404

408123

1.4301

408021

1.4404

408121

Antislip

168

168

Mesh grating

L15 Plain

168

168

Quadrato grating

L15

Plain

Antislip

168

168

Ladder grating

M125 Plain

168

168

Ladder grating

C250

168

168

Heelsafe grating

L15

Plain

168

168

Volcano grating

L15

Antislip

Arla grating

L15

Antislip

64

168

64

168

168 148

168 148

Table 29

Slot cover

M125

Plain

33

Family range / ACO gully 157

ACO gully 157 – gratings for frame 250×250 mm Picture

Drawing

Name

Load class

Surface

218

Material

Part Nr.

1.4301

408095

1.4404

408195

1.4301

408096

1.4404

408196

1.4301

408097

1.4404

408197

1.4301

408028

1.4404

408128

1.4301

408029

1.4404

408129

1.4301

408044

1.4404

408144

1.4301

408031

1.4404

408131

1.4301

408033

1.4404

408133

1.4301

408032

1.4404

408132

1.4301

408030

1.4404

408130

Antislip 218

Mesh grating

L15 Plain

218

218

Quadrato grating

L15

Plain

218

Antislip 218

Ladder grating

M125 Plain

218

218

Ladder grating

C250

Plain

218

218

Heelsafe grating

L15

Plain

34

218

218

Volcano grating

L15

Antislip

218

218

Arla grating

L15

Antislip

218

Table 30

198

218 198

Slot cover

M125

Plain

Family range / ACO gully 157

ACO gully 157 – gratings for vinyl top Drawing

Name

Ladder grating

170

Picture

170

170

Perforated grating

Slot cover

Load class

M125

L15

M125

Surface

Material

Part Nr.

1.4301

97146

1.4404

97367

1.4301

97152

1.4404

97369

1.4301

97154

1.4404

97370

Plain

Plain

Plain

Table 31

35

Family range / ACO gully 218

ACO gully 218 – fixed height – horizontal and vertical outlet I Hygienic design including large radii formed contours, deep-drawn components and minimal welds to minimize crevices and bacteria traps according to EN 1672 and EN ISO 14159 I Stainless steel gully fully compliant to EN 1253 I Available in 1.4301 (304) or 1.4404 (316L) grades of stainless steel

36

I Dry sump design ensures no standing waste water in gully base I Fully removable and easily cleaned stainless steel foul air trap (FAT) I Removable hygienic and corrosion resistant Nitrile FAT support I High flow rate gullies from 5 l/s I Gully top frame size: 300×300 mm

I Outlet spigot DN 100/150 (110 mm or 160 mm OD) for vertical outlet, DN 100 (110 mm OD) for horizontal outlet.

I Wide range of gratings to load class L15 – M125 (EN 1253) or C250 (EN 124) I Optional high volume silt basket 0.7 litre (horizontal outlet) or 1.4 litre (vertical outlet)

Family range / ACO gully 218

ACO gully 218 – fixed height – vertical outlet Picture

Drawing

Top size

DN/OD

FAT

Material

Part Nr.

1.4301

408004

1.4404

408104

1.4301

408005

1.4404

408105

1.4301

408006

1.4404

408106

1.4301

408007

1.4404

408107

Material

Part Nr.

1.4301

408012

1.4404

408112

1.4301

408013

1.4404

408113

30

300

198

Without FAT 300×300 mm

100/110 mm

99

With FAT 110

30

300

198

Without FAT 300×300 mm

150/160 mm

77

With FAT 160

Table 32 ACO gully 218 – fixed height – horizontal outlet Picture

Drawing

Top size

DN/OD

FAT

300

300×300 mm

100/110 mm

110

175

125

30

Without FAT

With FAT 199

Table 33

37

Family range / ACO gully 218

ACO gully 218 – telescopic – horizontal and vertical outlet I Hygienic design including large radii formed contours, deep-drawn components and minimal welds to minimize crevices and bacteria traps according to EN 1672 and EN ISO 14159 I Stainless steel gully fully compliant to EN 1253 I Available in 1.4301 (304) or 1.4404 (316L) grades of stainless steel I Dry sump design ensures no standing waste water in gully base

38

I Fully removable and easily cleaned stainless steel foul air trap (FAT) I Removable hygienic and corrosion resistant Nitrile FAT support I High flow rate gullies from 5 l/s I Friction lock adjustable and 360º rotatable gully top I Gully top frame size: 300×300 mm I Outlet spigot DN 100/150 (110 mm or 160 mm OD) for vertical outlet, DN100 (110 mm OD) for horizontal outlet only

I Wide range of gratings to load class L15 – M125 (EN 1253) or C250 (EN 124) I Optional high volume silt basket 0.7 litre (horizontal outlet) or 1.4 litre (vertical outlet) I Gully body with location flange or integrated membrane flange for either adhesive bonding or mechanical clamp

Family range / ACO gully 218

ACO gully 218 – telescopic – vertical outlet Picture

Drawing

Flange type

DN/OD

FAT

242

Material

Part Nr.

1.4301

408060

1.4404

408160

1.4301

408061

1.4404

408161

1.4301

408062

1.4404

408162

1.4301

408063

1.4404

408163

1.4301

408064

1.4404

408164

1.4301

408065

1.4404

408165

1.4301

408066

1.4404

408166

1.4301

408067

1.4404

408167

1.4301

408068

170

Without FAT 100/110 mm

98

Location flange

With FAT 110 418

Without FAT 100/110 mm

98

170

Adhesive bonding flange

With FAT 110 418

Without FAT 100/110 mm

98

170

Mechanical clamping flange

With FAT 110

242

170

Without FAT 150/160 mm

77

Location flange

With FAT 160

418

39

Without FAT 170

Adhesive bonding flange

1.4404

408168

1.4301

408069

1.4404

408169

1.4301

408070

1.4404

408170

1.4301

408071

1.4404

408171

150/160 mm

77

With FAT 160

418

Without FAT 170

Mechanical clamping flange 77

With FAT 160

Table 34

150/160 mm

Family range / ACO gully 218

ACO gully 218 – telescopic – vertical outlet – shallow version Picture

Drawing

Flange type

DN/OD

FAT

Material

Part Nr.

1.4301

415172

1.4404

415175

1.4301

415173

1.4404

415176

1.4301

415174

1.4404

415177

135

໅240

100/110 mm

Without FAT

99

Location flange

໅110

135

໅420

100/110 mm

Without FAT

99

Adhesive bonding flange ໅110

135

໅420

99

Mechanical clamping flange

100/110 mm

Without FAT

໅110

Note: These gullies can not be equipped with standard FAT. These gullies can be equipped with fire protective bellshape FAT. These gullies can be installed with using of fit-in. Fire certified solution - see page 5.

Table 35 ACO gully 218 – telescopic – horizontal outlet Picture

Drawing

Flange type

DN/OD

FAT

Part Nr.

1.4301

408084

1.4404

408184

1.4301

408085

1.4404

408185

1.4301

408086

1.4404

408186

1.4301

408087

1.4404

408187

1.4301

408088

1.4404

408188

1.4301

408089

1.4404

408189

Without FAT

242

110

147

98

40

Location flange

100/110 mm With FAT

199

Without FAT

110

147

98

418

Adhesive bonding flange

100/110 mm With FAT

199

Without FAT

110

147

98

418

199

Table 36

Material

Mechanical clamping flange

100/110 mm With FAT

Family range / ACO gully 218

ACO gully 218 – telescopic – gully tops Picture

Drawing

Top type

Height of grate

Material

Part Nr.

1.4301

408228

1.4404

408238

1.4301

408242

1.4404

408252

1.4301

408243

1.4404

408253

1.4301

408247

1.4404

408257

Material

Part Nr.

1.4301

408209

200

1.4404

408219

418

1.4301

408226

1.4404

408236

1.4301

408227

1.4404

408237

53

104

30

300

200

Square top 300×300mm (concrete, tiled and resin screed floors)

30 mm

53

96

30

300

Vinyl floor top

30 mm

200

300

30 mm

53

104,5

Thin-bed top 200

53

104,5

300

Thin-bed top seepage drainage

30 mm

200

Table 37 ACO gully 218 – telescopic – raising pieces Picture

Drawing

Raising piece type

53

96

242

Raising piece with location flange

53

96

Raising piece with adhesive bonding flange 200

418

53

96

Raising piece with mechanical clamping flange with screws 200

Table 38

41

Family range / ACO gully 218

ACO gully 218 – Accessories and spares Picture

Drawing

Name

Material

Part Nr.

1.4301

408222

1.4404

408232

1.4301

408223

1.4404

408233

1.4404

408220

1.4404

408230

Standard foul air trap support

Nitrile

408221

Friction ring installation set

Nitrile

408225

217 50

Vertical outlet gully silt basket 1.4 litre capacity

Horizontal outlet gully silt basket 0.7 litre capacity

26

217

182

96

Standard foul air trap

21

217

200

24

243

໅120

70

໅290

42

* Can be used for gullies with vertical outlet only.

Table 39

Fit-in I Non-flammable in accordance with building materials class A1 I For mortar-less installation in core bores: 300 mm I Dimensions Fit-In I Diameter: 290 mm I Height: 200 mm

Fire protective bellshape foul air trap* I Fire protection bell-shape odour seal with moulded fire protection cartridge I Fire and smoke seal for additional fire protection of drain bodies

9390.10.40

Plastic

5087.10.15

Family range / ACO gully 218

ACO gully 218 – gratings for frame 300×300 mm Picture

Drawing

Name

Load class

Surface

268

Material

Part Nr.

1.4301

408034

1.4404

408134

1.4301

408035

1.4404

408135

1.4301

408036

1.4404

408136

1.4301

408037

1.4404

408137

1.4301

408038

1.4404

408138

1.4301

408045

1.4404

408145

1.4301

408040

1.4404

408140

1.4301

408042

1.4404

408142

1.4301

408041

1.4404

408141

1.4301

408039

1.4404

408139

Antislip 268

Mesh grating

L15 Plain

268

L15

Plain

268

Quadrato

268

Antislip 268

Ladder grating

M125 Plain

268

268

Ladder grating

C250

Plain

268

268

Heelsafe grating

L15

Plain

268

268

Volcano

L15

Antislip

268

268

ARLA grating

L15

Antislip

Table 40

248

268

268 248

Slot cover

M125

Plain

43

Family range / ACO gully 218

ACO gully 218 – gratings for vinyl top Drawing

Name

222

222

222

Picture

Table 41

44

Ladder grating

Perforated grating

Slot cover

Load class

M125

L15

M125

Surface

Material

Part Nr.

1.4301

97148

1.4404

97388

1.4301

97153

1.4404

97390

1.4301

97156

1.4404

97391

Plain

Plain

Plain

Flow rates

Flow rates

98

233

135

25

ACO gully 142 - fixed height

Flow rate [l/s] Horizontal DN 70 Vertical Horizontal DN 100 Vertical

1.4 1.4 1.6 1.6

Table 42

Flow rate [l/s] Horizontal DN 70 Vertical Horizontal DN 100 Vertical

1.4 1.4 1.6 1.6

1.6 1.6 1.8 1.8

1.6 1.6 1.8 1.8

(77)

(47)

157

127

97 (47)

82

52

ACO gully 142 - telescopic

1.7 1.7 1.9 1.9

1.8 1.8 2.0 2.0

Table 43

45

ACO gully 157 – height

ACO gully 218 – height 300

90

99

193

198

25

30

200

75

Flow rate [l/s] Horizontal DN 70 Vertical Horizontal DN 100 Vertical Table 44

2.6 2.7 2.8 3.5

110

Flow rate [l/s] Horizontal DN 100 Vertical DN 150 Vertical Table 45

4.4 5.0 5.0

Flow rates

ACO gully 157 – telescopic 200

200

200

200

180

129

101

91

41

200

75 157

75

75 75

157

157 75

157

157

Flow rate [l/s] Horizontal DN 70 Vertical Horizontal DN 100 Vertical

2.6 2.7 2.8 3.5

2.9 3.0 3.3 4.0

3.0 3.0 3.6 4.1

3.1 3.1 4.0 4.2

3.3 3.3 4.4 4.4

Table 46

ACO gully 218 – telescopic 300

300

300

300

110 218

110 218

187

136

98

48

98

300

110 110 218 218

110 218

46

Flow rate [l/s] Horizontal DN 100 Vertical DN 150 Vertical Table 47

4.4 5.0 5.0

4.6 5.5 5.5

4.8 5.6 5.6

4.9 5.8 5.8

5.4 6.2 6.2

Cleaning methods

Cleaning methods Cleaning methods Stainless steel and NBR is easy to clean.

Washing with soap or a mild detergent and warm water followed by a clear water rinse is usually quite adequate for many industrial applications. An enhanced aesthetic appearance will be achieved if the cleaned surface is finally wiped dry.

Problem

Conclusion If all the suggestions and actions in the table below have been attempted, stainless steel has the facility to be mechanically cleaned by specialists on site. Please contact ACO Industries for further assistance.

Cleaning agent Soap or mild detergent and water (such as washing up liquid).

Comment Sponge, rinse with clean water, wipe dry if necessary.

Fingerprints, all finishes

Soap or warm water or organic solvent (e.g. acetone, alcohol).

Rinse with clean water, wipe dry if necessary.

Stubborn stains and discolouration.

Mild cleaning solutions (e.g. Jif, Goddard stainless Steel Care).

Rinse well with clean water and wipe dry.

Oil and grease marks, all finishes.

Organic solvents (e.g. acetone, alcohol, trichlorethylene).

Clean after with soap and water, rinse with clean water and dry.

Rust and other corrosion products.

Oxalic acid. The cleaning solution should be applied with a swab and allowed to stand for 15–20 minutes before being washed away with water. May continue using Jif to give final clean.

Rinse well with clean water (precautions for acid cleaners should be observed).

Scratches on brush (satin) finish.

Household synthetic fibre scouring pads (e.g.

Scotch Brite fibre pad). For deeper scratches; apply in direction of polishing. The clean with soap or detergent as per routine cleaning.

Do not use ordinary steel wool (iron particles can become embedded in stainless steel and cause further surface problems).

Routine cleaning, all finishes.

Table 48

47

Installation recommendations

Installation recommendations Telescopic flanged gully installed in suspended concrete slab construction

1

2 3

1

Ceramic tiles

2

Tile cement

3

Mastic sealant

4

Floor screed

5

Water proof membrane (WPM)

6

Gully

7

Suspended concrete slab core-boared to accept

4 5 6

7 gully body

Telescopic flanged gully and raising flanged piece installed in suspended concrete slab construction

1

2

3

4

48

5 1

Ceramic tiles

2

Tile cement

3

Mastic sealant

4

Floor screed

5

Water proof membrane (WPM)

6

Insulation

7

Double flange gully

8

Suspended concrete slab core-boared to accept gully body

7

7

6

8

Installation recommendations

Telescopic flanged gully installed in solid concrete floor

1

2 3

1

Ceramic tiles

2

Tile cement

3

Mastic sealant

4

Floor screed

5

Water proof membrane (WPM)

6

Flange gully

7

Solid concrete floor slab

8

Compacted soil

4 5 6

7

8

Telescopic flanged gully and raising piece installed in solid concrete floor

1

2 3

1

Ceramic tiles

2

Tile cement

3

Mastic sealant

4

Floor screed

5

Water proof membrane (WPM)

6

Insulation

7

Double flange gully

8

Solid concrete floor slab

9

Compacted soil

4 5

49

7

6

7

8

9

Installation recommendations

Fixed height gully installed in solid concrete floor

1 2

1

Ceramic tiles

2

Tile cement

3

Mastic sealant

4

Floor screed

5

Dampf proof membrane (DPM)

6

Gully

7

Outlet pipe

8

Floor slab

9

Compacted soil

3 4

5 6 7

8 9

50

ACO gully

Notes

51

www.aco.com The ACO Group – a strong family you can build on.

All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer’s responsibility to ensure that each product is fit for its intended purpose and that the actual conditions of use are suitable. This brochure and any advice is provided free of charge and accordingly on terms that no liability (including liability for negligence) will attach the Company or its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company’s policy of continuous product development and improvement renders specifications liable to modification. information provided in this brochure is therefore subject to change without prior notification.

62500/ACO gully/En/12/10/M7 Subject to technical changes without notice

ACO Industries k.s., Havlíčkova 260 582 22 Přibyslav Czech Republic