Note
To begin
Basic working method and markings
Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat).
Solid lines
Fold along these lines. The printed surface should be on the outside of the folded shape.
Items of Caution *Take care when using sharp or pointed objects or when using bladed cutting tools. Place a heavy sheet of paper under the paper you want to cut. *Use glue and other adhesives only in well-ventilated areas. *When printing, use a slightly reduced font size. There may be differences in dimensions, depending on the type of printer used.
Broken lines
Fold along these lines. The printed surface should be on the inside of the folded shape. Dotted line
Cut along these lines.
How to assemble *Follow the working method and markings carefully. *Cut carefully along the outter line with cutting blade, Exacto-knife or scissors.
Do not fold or cut the parts marked .
One - point Advice *Cut carefully with cutting blade, Exacto-knife or scissors.
Cut out parts marked with an asterisk(*).
*For folding parts, first use an awl or other pointed tool to make a light crease along the dotted or solid line. This will make the folds straight. Avoid making strong creases, as this will cause the paper to tear. *As an adhesive, white wood glue is recommended. Avoid over application as this may cause the paper to wrinkle.
Red dots are the reference positions for gluing surfaces.
*Before beginning assembly, test adhesive amounts on extra paper. *Occasionally, white spots will be apparent on folds and cuts. Use a marker or pencil to fill in these spots. It is recommended that this be done after each stage of assembly because coloring becomes more difficult once parts are assembled.
Please glue them by aligning the red and red/blue and blue parts if they are marked on the paper. 2
1 Assembling the Engine First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Engine 1 Sheet A, 16 parts in total
Indication of Working Methods
Fold or Curve
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side. A-83(82)
A-79(80)
A-75(76)
Reference photo
A-81(84)
A-77(78) A-73(74)
A-85(86)
A-71(72)
Engine 2 Sheet A, 6 parts in total
Reference photo *Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side. A-87(88)
A-89(90)
A-91(92)
3
1 Assembling the Engine First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Engine 3 Sheet A, 84 parts in total
Indication of Working Methods
Fold or Curve
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side. A-67(68) A-95(96)
A-59(60)
A-97(98)
A-63(64)
A-93(94)
A-37(38)
A-55(56) A-45(46)
A-51(52)
A-53(54)
A-47(48)
A-43(44)
A-61(62)
A-39(40)
A-35(36)
A-69(70) A-31(32)
A-65(66)
A-29(30)
A-57(58) A-49(50) A-41(42)
A-101(102)
A-33(34)
Reference photo A-103(104)
A-27(28)
A-99(100) A-25(26)
A-105(106)
A-23(24) A-15(16) A-21(22)
A-7(8) A-13(14) A-5(6)
A-19(20) A-11(12)
A-3(4) A-1(2)
A-17(18) A-9(10)
4
1 Assembling the Engine First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Engine 4 Sheet A, 7 parts in total
Indication of Working Methods
Fold or Curve
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
Glue in order from 1 to 3 on the graphic. Reference photo
A-117 A-116
3 A-112
1
2 A-114
A-111 A-113
A-115
Engine 5 Sheet A, 3 parts in total
Reference photo
A-110 A-109
A-108
Intake
A-125
Sheet A, 7 parts in total
Reference photo
* At this point, do not glue A-120 and 119 on A-125.
A-119 A-121
A-120
A-123 A-122 A-124
5
1 Assembling the Engine First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Engine 6 Sheet A, 5 parts in total
Indication of Working Methods
Fold or Curve
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
Reference photo
A-129
A-128 A-130 A-132 A-131
Engine 7 Sheet A, 4 parts in total
Reference photo A-143
A-142 A-140
A-141
Engine 8 Sheet A, 2 parts in total
Reference photo
Glue in order from 1 to 2 on the graphic.
2
A-147
1 A-146
6
1 Assembling the Engine First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Engine
Fold or Curve
Indication of Working Methods
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
Sheet A, 147 parts in total
[ The right side of engine ]
Connect each of the previously assembled parts in order from 1 - 20 according to the diagram.
Engine2
Engine1 A-137
A-133
8 6
Engine3
2
19
Engine6 19
7
A-145
5 4 3 Engine7
20
A-139
1
20
A-144
Engine8 A-118
9 [ The right right side of engine ]
A-107
10 11
18
12
17
14 13
A-127 A-126
15 16 A-135
Engine4 Engine5 Reference photo
A-138
A-134
A-136
7
2 Assembling the Side Covers First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Side Covers 1 Sheet B, 1 parts in total
Indication of Working Methods
Fold or Curve
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
Reference photo
B-1
Side Covers 2 Sheet B, 6 parts in total
B-7
B-2
B-6
Reference photo
B-3 B-4 B-5
Side Covers 3 Sheet B, 2 parts in total
Reference photo B-8 B-9
8
2 Assembling the Side Covers First, assemble each component by following the working method and markings. Then, refer to the illustration and photos below to glue the parts together.
Side Covers 4 Sheet B, 9 parts in total
B-12 B-13
Indication of Working Methods
Fold or Curve
Glue
Fold each relevant part according to the assembly symbols. Please use the dots on each component as reference when gluing surfaces.
B-14 B-15 B-16 B-17
B-18
B-19
Reference photo
B-20
Side Covers 5 Sheet B, 2 parts in total
B-10
Reference photo B-11
9