Note
To begin
Basic working method and markings
Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat).
Solid lines
Fold along these lines. The printed surface should be on the outside of the folded shape.
Items of Caution *Take care when using sharp or pointed objects or when using bladed cutting tools. Place a heavy sheet of paper under the paper you want to cut. *Use glue and other adhesives only in well-ventilated areas. *When printing, use a slightly reduced font size. There may be differences in dimensions, depending on the type of printer used.
Broken lines
Fold along these lines. The printed surface should be on the inside of the folded shape. Dotted line
Cut along these lines.
How to assemble *Follow the working method and markings carefully. *Cut carefully along the outter line with cutting blade, Exacto-knife or scissors.
Do not fold or cut the parts marked .
One - point Advice *Cut carefully with cutting blade, Exacto-knife or scissors.
Cut out parts marked with an asterisk(*).
*For folding parts, first use an awl or other pointed tool to make a light crease along the dotted or solid line. This will make the folds straight. Avoid making strong creases, as this will cause the paper to tear. *As an adhesive, white wood glue is recommended. Avoid over application as this may cause the paper to wrinkle.
Red dots are the reference positions for gluing surfaces.
*Before beginning assembly, test adhesive amounts on extra paper. *Occasionally, white spots will be apparent on folds and cuts. Use a marker or pencil to fill in these spots. It is recommended that this be done after each stage of assembly because coloring becomes more difficult once parts are assembled.
Please glue them by aligning the red and red/blue and blue parts if they are marked on the paper. 2
3 Assembling the Frame First, assemble each component by following the working method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Frame1
Fold each relevant part according to the assembly symbols.
Sheet C, 12 parts in total
Please use the
dots on each component as reference when gluing surfaces.
C- 4
C- 9
C- 5 C- 6 C- 15 C- 13
C- 7,8
Reference photo
C- 11
C- 14 C- 10
C- 12
Frame2 Sheet C, 4 parts in total
C- 28
C- 29
Reference photo
C- 26
C- 27
3
3 Assembling the Frame First, assemble each component by following the working method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Frame3
Fold each relevant part according to the assembly symbols.
Sheet C, 9 parts in total
Please use the
dots on each component as reference when gluing surfaces. C- 24
C- 23
C- 19
C- 21
C- 17
Reference photo C- 22
C- 20
C- 18
C- 16
Frame4 Sheet C, 6 parts in total
Glue in order from 1 to 2 on the graphic. *Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side.
C- 42(43)
C- 40(41)
Reference photo 2 1 2
C- 38(39)
4
3 Assembling the Frame First, assemble each component by following the working method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Frame5
Fold each relevant part according to the assembly symbols.
Sheet C, 7 parts in total
Please use the
dots on each component as reference when gluing surfaces. C- 50
Reference photo
C- 51 C- 52
C- 53
C- 54
C- 55
C- 56
Frame6 Sheet C, 3 parts in total C- 59
Reference photo
C- 58
C- 57
Frame7 Sheet C, 3 parts in total
C- 61
C- 60
C- 62
5
Reference photo
3 Assembling the Frame First, assemble each component by following the working method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Frame8
Fold each relevant part according to the assembly symbols.
Sheet C, 7 parts in total
Please use the
dots on each component as reference when gluing surfaces.
C- 63
C- 68
C- 69
C- 67
Reference photo
C- 66 C- 64 C- 65
Frame9 Sheet C, 6 parts in total
Glue in order from 1 to
2
on the graphic.
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side. C- 72(73)
Reference photo
C- 70(71)
1 C- 74(75)
2
6
3 Assembling the Frame First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Frame
Fold each relevant part according to the assembly symbols.
Sheet C, 75 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Connect each of the previously assembled parts in order from 1 - 11 according to the diagram.
C- 45
2 C- 49
C- 47
Frame 3
C- 44
C- 46
1
7
2
Frame 2
1
Frame 4 6
6
6
7 6
9
10
C- 48
10
7 C- 3
Frame 4
8
4
C- 33
11
Frame 7
11 C- 25
4
C- 31
3
7
11
5 C- 2
Frame 5
3
5
C- 1
C- 36
11
C- 32
Frame 9
5
5
C- 35
Frame 6
C- 30
C- 37
11
11
Frame1
* At this point, do not paste frame1 on C-1, C-2, C-34 and C-35.
7
C- 34
Frame 8
Reference photo
4 Assembling the Rear Arm First, assemble each component by following the working method and markings. Then, refer to the illustration and
Indication of Working Methods
Fold or Curve
Glue
photos below to glue the parts together.
Rear Arm1
Fold each relevant part according to the assembly symbols.
Sheet D, 6 parts in total
Please use the
dots on each component as reference when gluing surfaces.
*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side.
D- 3(4)
D- 1(2)
D- 5(6)
Reference photo
Rear Arm2 Sheet D, 9 parts in total
D- 21
D- 20
Glue in order from 1 to
6
on the graphic. D- 22
D- 23
1
2
6
1
D- 19
1
D- 24 D- 18
6
5
3
4
1
6
D- 25
8
D- 26
Reference photo
4 Assembling the Rear Arm First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Rear Arm3
Fold each relevant part according to the assembly symbols.
Sheet D, 7 parts in total
Please use the
Glue in order from 1 to
6
dots on each component as reference when gluing surfaces.
on the graphic. D- 32
D- 33
D- 35
D- 31
6 5 5 1
2
D- 30
3
D- 34 D- 29
4 4
Reference photo
9
4 Assembling the Rear Arm First, assemble each component by following the working method and markings. Then, refer to the illustration and
Fold or Curve
Indication of Working Methods
Glue
photos below to glue the parts together.
Rear Arm
Fold each relevant part according to the assembly symbols.
Sheet D, 36 parts in total
Please use the
dots on each component as reference when gluing surfaces.
Connect each of the previously assembled parts in order from 1 - 16 according to the diagram.
D- 12
Rear Arm 3
15
Rear Arm 1
D- 36
4
5 6
D- 27
15
D- 28 D- 17
11
14 D- 16 D- 15
12
D- 13
2
2
3
Rear Arm 1
1
D- 11
14 13
14 16
D- 10
10
14 D- 14
13
7 D- 7
8
Rear Arm 2
9 D- 8
10
D- 9
Reference photo