moto4a

Page 1


Note

To begin

Basic working method and markings

Tools and materials needed -Ruler - scissors - blade cutter or "Exacto-knife" - awl or other pointed tool (for making a folding crease) - felt pen - pin set - glue - hand towel ( for cleaning your fingers) dictionary or other heavy book ( to press the papers flat).

Solid lines

Fold along these lines. The printed surface should be on the outside of the folded shape.

Items of Caution *Take care when using sharp or pointed objects or when using bladed cutting tools. Place a heavy sheet of paper under the paper you want to cut. *Use glue and other adhesives only in well-ventilated areas. *When printing, use a slightly reduced font size. There may be differences in dimensions, depending on the type of printer used.

Broken lines

Fold along these lines. The printed surface should be on the inside of the folded shape. Dotted line

Cut along these lines.

How to assemble *Follow the working method and markings carefully. *Cut carefully along the outter line with cutting blade, Exacto-knife or scissors.

Do not fold or cut the parts marked .

One - point Advice *Cut carefully with cutting blade, Exacto-knife or scissors.

Cut out parts marked with an asterisk(*).

*For folding parts, first use an awl or other pointed tool to make a light crease along the dotted or solid line. This will make the folds straight. Avoid making strong creases, as this will cause the paper to tear. *As an adhesive, white wood glue is recommended. Avoid over application as this may cause the paper to wrinkle.

Red dots are the reference positions for gluing surfaces.

*Before beginning assembly, test adhesive amounts on extra paper. *Occasionally, white spots will be apparent on folds and cuts. Use a marker or pencil to fill in these spots. It is recommended that this be done after each stage of assembly because coloring becomes more difficult once parts are assembled.

Please glue them by aligning the red and red/blue and blue parts if they are marked on the paper. 2


8 Assembling the Exhaust Pipes First, assemble each component by following the working method and markings. Then, refer to the illustration and

Indication of Working Methods

Fold or Curve

Glue

photos below to glue the parts together.

Exhaust Pipes 1

Fold each relevant part according to the assembly symbols.

Sheet H, 18 parts in total

Please use the

Glue in order from 1 to

8

dots on each component as reference when gluing surfaces.

on the graphic.

H- 9(14)

*Assemble both sides. The diagram H- 7(12) shows the left side. The number inside the ( ) is for the right side. 2 H- 6(11)

1

H- 8(13)

3

8

H- 5(10)

H- 4(18)

5

6

4

Reference photo

7 H- 3(17)

H- 2(16)

H- 1(15)

Exhaust Pipes2 Sheet H, 8 parts in total

Glue in order from 1 to

6

on the graphic.

H- 20

H- 25

H- 19

6

* Do not paste H-19 & H-20. 1

Reference photo

H- 21

2 6 H- 26

H- 22

H- 23

3 H- 24

5 4

3


8 Assembling the Exhaust Pipes First, assemble each component by following the working method and markings. Then, refer to the illustration and

Indication of Working Methods

Fold or Curve

Glue

photos below to glue the parts together.

Exhaust Pipes3

Fold each relevant part according to the assembly symbols.

Sheet H, 9 parts in total

Please use the

Glue in order from 1 to

7

dots on each component as reference when gluing surfaces.

on the graphic. * Do not paste H-29 & H-30.

2 1

H- 30

H- 29

H- 28

Reference photo

H- 33

3

H- 27

H- 31

6 5

H- 34

4

7

H- 32

H- 35

Exhaust Pipes4 Sheet H, 6 parts in total

Reference photo

*Assemble both sides. The diagram shows the left side. The number inside the ( ) is for the right side. H- 38(41)

H- 37(40) H- 36(39)

Exhaust Pipes5 Sheet H, 12 parts in total

H- 52

10

Glue in order from 1 to 10 on the graphic.

6

3 H- 47

7

H- 51

H- 53

1 H- 46

H- 50

5

8 H- 42

2 H- 45

H- 49

H- 44

9

4 H- 48 H- 43

4

Reference photo


8 Assembling the Exhaust Pipes First, assemble each component by following the working method and markings. Then, refer to the illustration and

Fold or Curve

Indication of Working Methods

Glue

photos below to glue the parts together.

Exhaust Pipes

Fold each relevant part according to the assembly symbols.

Sheet H, 53 parts in total

Please use the

dots on each component as reference when gluing surfaces.

Connect each of the previously assembled parts in order from 1 - 2 according to the diagram.

Exhaust Pipes1

Exhaust Pipes4

Exhaust Pipes1 * Do not paste Exhaust Pipes1 & Exhaust Pipes4. Exhaust Pipes4

Exhaust Pipes3

* Do not paste Exhaust Pipes4 & Exhaust Pipes5. * Do not paste on exhaust pipes.

Exhaust Pipes2 Exhaust Pipes2

* Do not paste on exhaust pipes.

Exhaust Pipes3

Exhaust Pipes5 1

2

Reference photo

5


9 Assembling the Seat First, assemble each component by following the working method and markings. Then, refer to the illustration and

Fold or Curve

Indication of Working Methods

Glue

photos below to glue the parts together.

Seat

Fold each relevant part according to the assembly symbols.

Sheet I, 8 parts in total

Please use the

dots on each component as reference when gluing surfaces.

Connect each of the previously assembled parts in order from 1 - 8 according to the diagram. I-6

5

6 4

I-8

I-5

3

6

I-

2

6

4

I-3

1

7 I -2

8

I-1

8 7

8 7

I-7

Reference photo

6


10 Assembling the right and left footrests First, assemble each component by following the working method and markings. Then, refer to the illustration and

Indication of Working Methods

Fold or Curve

Glue

photos below to glue the parts together.

Left footrests1

Fold each relevant part according to the assembly symbols.

Sheet J, 5 parts in total

Please use the

Glue in order from 1 to

4

dots on each component as reference when gluing surfaces.

on the graphic.

Reference photo

J- 11

4 J- 12

J- 13

1

J- 15

2 3 J- 14

Right footrests2 Sheet K, 5 parts in total

Reference photo

K- 1

K- 3

K- 5

K- 2

K- 4

Right footrests3 Sheet K, 10 parts in total

Glue in order from 1 to

9

on the graphic.

K- 21

9

2 K- 14

Reference photo

K- 18

K- 15

1 3

6 5

K- 13

7

8

K- 19

4 K- 12

K- 17 K- 16

K- 20

7


10 Assembling the right and left footrests First, assemble each component by following the working method and markings. Then, refer to the illustration and

Fold or Curve

Indication of Working Methods

Glue

photos below to glue the parts together.

Left footrests

Fold each relevant part according to the assembly symbols.

Sheet J, 15 parts in total

Please use the

dots on each component as reference when gluing surfaces.

Connect each of the previously assembled parts in order from 1 - 10 according to the diagram.

J- 2

J- 3

J- 5

J- 4

7

3

8 J- 8

10 J- 6

J- 7

1

J- 10

9 5 4

2

6 J- 1

Left footrests1

J- 9

Reference photo

8


10 Assembling the right and left footrests First, assemble each component by following the working method and markings. Then, refer to the illustration and

Indication of Working Methods

Fold or Curve

Glue

photos below to glue the parts together.

Right footrests

Fold each relevant part according to the assembly symbols.

Sheet K, 22 parts in total

Please use the

dots on each component as reference when gluing surfaces.

Connect each of the previously assembled parts in order from 1 - 7 according to the diagram.

Right footrests2 Right footrests3

6 6 6 7

1

K- 11

5

K- 7

K- 8

3

K- 6

K- 10

2

4 K- 9

Reference photo

9


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.