PLASTIC ENCLOSURES HAMMoND MANUFACTUrING
MINIATUrE HAND HElD PlAsTIC ENClosUrEs
Hammond is a leading manufacturer of industrial and electronic enclosures, racks and rack cabinets.
With Key Ring Kit
Products Include: • Industrial enclosures • Disconnect enclosures • Operator interface enclosures • Commercial enclosures • General accessories • Hoffman cross reference
• • • • •
Corrosion resistant enclosures Modular freestanding enclosures Wireway & trough Climate control products Technical information
H
H L
L
EN-1
W
• Ideally suited for mounting small printed circuit boards or as potting boxes • Designed to meet IP54
MINIATUrE FlANGED lID PlAsTIC ENClosUrEs
Dimensions (inches) l W H
Colour
Manf. Part No.
Without Key Ring Kit 1.38
1.38
0.59
Black Grey Translucent Blue
1551NBK 1551NGY 1551NTBU
1.38
1.38
0.79
Black Grey Translucent Blue
1551MBK 1551MGY 1551MTBU
1.58
1.58
0.59
Black Grey Translucent Blue
1551QBK 1551QGY 1551QTBU
1.58
1.58
0.79
Black Grey Translucent Blue
1551PBK 1551PGY 1551PTBU
1.97
1.38
0.59
Black Grey Translucent Blue
1551FBK 1551FGY 1551FTBU
1.97
1.38
0.79
Black Grey Translucent Blue
1551GBK 1551GGY 1551GTBU
1.97
1.97
0.59
Black Grey Translucent Blue
1551SBK 1551SGY 1551STBU
1.97
1.97
0.79
Black Grey Translucent Blue
1551RBK 1551RGY 1551RTBU
2.36
1.38
0.59
Black Grey Translucent Blue
1551JBK 1551JGY 1551JTBU
2.36
1.38
0.79
Black Grey Translucent Blue
1551HBK 1551HGY 1551HTBU
3.15
1.58
0.59
Black Grey Translucent Blue
1551LBK 1551LGY 1551LTBU
3.15
1.58
0.79
Black Grey Translucent Blue
1551KBK 1551KGY 1551KTBU
H L W
• Ideally suited for mounting small printed circuit boards or as potting boxes • Flanged lid is perfect for wall or shelf mounting or suspending with a tie wrap • Designed to meet IP54
l
Dimensions (inches) W H
1.38
1.38
Colour
Manf. Part No.
0.59
Black Grey
1551NFLBK 1551NFLGY 1551MFLBK 1551MFLGY
1.38
1.38
0.79
Black Grey
1.58
1.58
0.59
Black Grey
1551QFLBK 1551QFLGY
1.58
1.58
0.79
Black Grey
1551PFLBK 1551PFLGY
1.97
1.38
0.59
Black Grey
1551FFLBK 1551FFLGY
1.97
1.38
0.79
Black Grey
1551GFLBK 1551GFLGY
1.97
1.97
0.59
Black Grey
1551SFLBK 1551SFLGY
1.97
1.97
0.79
Black Grey
1551RFLBK 1551RFLGY 1551JFLBK 1551JFLGY
2.36
1.38
0.59
Black Grey
2.36
1.38
0.79
Black Grey
1551HFLBK 1551HFLGY 1551LFLBK 1551LFLGY 1551KFLBK 1551KFLGY
3.15
1.58
0.59
Black Grey
3.15
1.58
0.79
Black Grey
With Key Ring Kit 1.97
1.38
0.67
Black Grey Translucent Blue
*1551GRBK *1551GRGY *1551GRTBU
2.36
1.38
0.67
Black Grey Translucent Blue
*1551HRBK *1551HRGY *1551HRTBU
3.15
1.57
0.67
Black Grey Translucent Blue
*1551KRBK *1551KRGY *1551KRTBU
* Not all available
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
PLASTIC ENCLOSURES HEAVY DUTY THICKWAll rFI CoNDUCTIVE PlAsTIC ENClosUrEs
ABs PlAsTIC - soFT sIDED HAND HElD ENClosUrEs
W
H
L
L
W
H
• Overmoulded in general purpose ABS plastic with a soft plastic grip • Top cover is recessed for membrane display or keypad soft side Colour
EN-2
• • • •
Designed for EMI/RFI shielding applications Heavy duty, thick wall design with an average wall thickness of .13” Flammability rating: UL 94V-0 Designed to meet IP54
l
Dimensions in. W
H
2.17
2.17
1.10
Batt Door
Dimensions in. l W H
Enclosure Colour
Manf. Part No.
Gray
No
4.62
3.11
.95
Black
1553BBK
Gray
No
4.62
3.11
.95
Gray
1553BGY
Black
No
4.62
3.11
.95
Black
1553BBKBK
Black
No
4.62
3.11
.95
TransBlue
1553BTBUBK
Black
No
4.62
3.11
.95
Red
1553BRDBK
Black
No
4.62
3.11
.95
Yellow
1553BYLBK
Gray
No
5.80
3.50
.98
Black
1553DBK
1594RFIABK
Gray
No
5.80
3.50
.98
Gray
1553DGY
Manf. Part No.
3.15
2.17
1.10
1594RFIBBK
Black
No
5.80
3.50
.98
Black
1553DBKBK
4.13
2.56
1.30
1594RFICBK
Black
No
5.80
3.50
.98
TransBlue
1553DTBUBK
5.12
2.56
1.70
1594RFIDBK
Black
No
5.80
3.50
.98
Red
1553DRDBK
6.50
4.13
2.09
1594RFIEBK
Black
No
5.80
3.50
.98
Yellow
1553DYLBK
Gray
Yes
4.62
3.11
.95
Black
1553BBKBAT
Gray
Yes
4.62
3.11
.95
Gray
1553BGYBAT
Black
Yes
4.62
3.11
.95
Black
1553BBKBKBAT
rFI - HAND HElD CoNDUCTIVE PlAsTIC ENClosUrEs H
L
Black
Yes
4.62
3.11
.95
TransBlue
1553BTBUBKBAT
Black
Yes
4.62
3.11
.95
Red
1553BRDBKBAT
Black
Yes
4.62
3.11
.95
Yellow
1553BYLBKBAT
Gray
Yes
5.80
3.50
.98
Black
1553DBKBAT
Gray
Yes
5.80
3.50
.98
Gray
1553DGYBAT
Black
Yes
5.80
3.50
.98
Black
1553DBKBKBAT
Black
Yes
5.80
3.50
.98
TransBlue
1553DTBUBKBAT
Black
Yes
5.80
3.50
.98
Red
1553DRDBKBAT
Black
Yes
5.80
3.50
.98
Yellow
1553DYLBKBAT
PrINTED CIrCUIT BoArDs For 1553 ENClosUrEs
W
• Designed for EMI/RFI shielding applications • Flammability rating: UL 94V-0 • Designed to meet IP54
l
Dimensions (inches) W
H
Manf. Part No.
size
Use With Enclosure
Manf. Part No.
2.8 x 4.3 in. (71 x 108mm)
1553 B Series
PR1553B
size
Use With Enclosure
Manf. Part No.
2.9 x 5.5 in. (74 x 139mm)
1553 D BAT Series
PR1553DB
5.12
2.56
0.98
1599RFIBBK
6.70
3.35
1.33
1599RFIEBK
8.66
4.33
1.73
1599RFIHBK
8.66
5.50
1.60
1599RFIKBK
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
PLASTIC ENCLOSURES TWo PIECE FIxED PANEl PlAsTIC ENClosUrEs
ABs PlAsTIC HAND HElD ENClosUrEs
H H
L W L
W
• • •
Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop, or wall mount applications Moulded in polystyrene plastic Assembled with four M3x0.5” (13mm) Phillips machine screws (included) threaded into integral bushings • Includes four self tapping screws for internal standoffs • Lid is a smooth light gray, and the bottom is a smooth dark gray • Designed to meet IP54 EN-3 Dimensions (inches) l W H
Ventilated lid
Manf. Part No.
2.56
1.97
1.18
No
MB655030
2.56
1.97
1.77
No
MB655045
3.94
1.97
0.98
No
MB105025
3.94
1.97
1.57
No
MB105040
3.94
1.97
1.57
Yes
MB105040VL
4.72
2.56
1.57
No
MB126540
4.72
2.56
1.57
Yes
MB126540VL
4.72
2.56
2.56
No
MB126565
5.91
3.15
2.17
No
MB158055
• • • • •
Complete with top & bottom, removable front panel, battery door (except on the smallest size) and three self-tapping screws. Top panel has a fl at display area, perfect for labels, silk screening, membrane keypads or easily machined. Lap joint construction provides protection against access of dust and splashing water Battery compartment (except on the smallest size) suitable for either a 9V (PP3) or 2 x AA batteries The base is moulded with bosses for easy P.C. board mounting Moulded in fl ame retardant ABS plastic Colour: black or gray Finish: satin texture
5.91
3.15
2.17
Yes
MB158055VL
5.91
3.15
3.15
No
MB158080
7.40
4.33
2.76
No
MB181170
7.40
4.33
2.76
Yes
MB181170VL
1.57
2.36
7.40
4.33
3.94
No
MB181110
3.35
2.36
7.40
4.33
4.72
No
MB181112
4.13
2.36
4.92 1.57 3.35
2.36
4.13 4.92
PoTTING BoxEs • • • •
• • •
One piece moulded construction Moulded from black general purpose ABS plastic Temperature rated -20°C to +94°C 1.0mm (0.04”) wall thickness
l 0.46
0.46
0.35
0.85
0.55
0.46
1596B110
0.98
0.79
0.59
1596B101
0.98
0.98
0.98
1596B112
1.18
0.79
0.59
1596B102
1.18
1.18
0.79
1596B111
1.57
1.37
0.79
1596B103 1596B107
Manf. Part No.
1.57
1.57
0.79
1.57
1.15
1596B113
1.96
1.57
1.18
1596B104
1.96
1.96
1.18
1596B-108
2.95
1.98
1.39
1596B105 1596B114
2.95
2.95
1.57
3.50
2.52
1.28
1596B115
3.93
2.36
0.99
1596B106
Wellington +64 4 915 9500
www.activecomponents.com
Manf. Part No.
0.73
Black
001100
0.87
Black
001102
0.87
Black
001104
2.76
0.87
Black
001106
2.36
0.73
Gray
001111
0.87
Gray
001113
2.36
0.87
Gray
001115
2.76
0.87
Gray
001117
Manf. Part No.
Black
001151
Gray
001152
1596B109
1.57
Auckland +64 9 443 9500
Enclosure Colour
Dimensions (inches) W H
Ventilated lid
Dimensions (inches) W
H
l
Christchurch +64 3 355 4545 sales@activecomponents.com
Can’t find what you’re looking for? Active has a massive range of enclosures and accessories not listed here. Contact us today for more details.
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
PlAsTIC ENClosUrEs sCrEW TYPE • • •
TrANsPArENT CoVEr CoNT. Dimensions (mm) WxHxD
Protection: IP66 (water and dust proof) Temperature range: -40°C to +80°C Materials: ABS Acrulonitrile Butadiene Styrene PC: Poly Carbonate (Transparent cover version only)
GrEY CoVEr EN-4
Dimensions (mm) WxHxD
Mounting plate Plastic Metal
50 x 65 x 55
X
X
order code
Mounting plate Plastic Metal
order code
80 x 180 x 70
TJ-0818P
TJ-0818
TJ-AT-0818
80 x 250 x 70
TJ-0825P
TJ-0825
TJ-AT-0825
80 x 110 x 85
TJ-0811P
TJ-0811
TJ-AT-0811-1
80 x 130 x 85
TJ-0813P
TJ-081
TJ-AT-0813-1
80 x 180 x 85
TJ-0818P
TJ-0818
TJ-AT-0818-1
80 x 250 x 85
TJ-0825P
TJ-0825
TJ-AT-0825-1
125 x 125 x 75
TJ-1212P
TJ-1212
TJ-AT-1212-S
125 x 125 x 100
TJ-1212P
TJ-1212
TJ-AT-1212
125 x 175 x 75
TJ-1217P
TJ-1217
TJ-AT-1217
125 x 175 x 100
TJ-1217P
TJ-1217
TJ-AT-1217-1
140 x 170 x 95
TJ-1417P
TJ-1417
TJ-AT-1417
150 x 200 x 100
TJ-1520P
TJ-1520
TJ-AT-1520 TJ-AT-1520-1
150 x 200 x 130
TJ-1520P
TJ-1520
150 x 250 x 100
TJ-1525P
TJ-1525
TJ-AT-1525
150 x 250 x 130
TJ-1525P
TJ-1525
TJ-AT-1525-1
200 x 200 x 130
TJ-2020P
TJ-2020
TJ-AT-2020
TJ-AG-0506
200 x 200 x 95
TJ-2020P
TJ-2020
TJ-AT-2020-S TJ-AT-1717-1
65 x 95 x 55
X
X
TJ-AG-0609
175 x 175 x 100
TJ-1717P
TJ-1717
80 x 110 x 45
TJ-0811P
TJ-0811
TJ-AG-0811-S
175 x 250 x 75
TJ-1725P
TJ-1725
TJ-AT-1725
80 x 110 x 70
TJ-0811P
TJ-0811
TJ-AG-0811
175 x 250 x 100
TJ-1725P
TJ-1725
TJ-AT-1725-1
80 x 130 x 70
TJ-0813P
TJ-0813
TJ-AG-0813
75 x 125 x 75
TJ-0712P
TJ-0712
TJ-AT-0712
80 x 160 x 55
TJ-0816P
TJ-0816
TJ-AG-0816-S
75 x 125 x 100
TJ-0712P
TJ-0712
TJ-AT-0712-1
80 x 160 x 90
TJ-0816P
TJ-0816
TJ-AG-0816
140 x 230 x 90
TJ-1423P
TJ-1423
TJ-AT-1423
80 x 180 x 70
TJ-0818P
TJ-0818
TJ-AG-0818
175 x 175 x 75
TJ-1717P
TJ-1717
TJ-AT-1717
80 x 250 x 70
TJ-0825P
TJ-0825
TJ-AG-0825
80 x 110 x 85
TJ-0811P
TJ-0811
TJ-AG-0811-1
80 x 130 x 85
TJ-0813P
TJ-081
TJ-AG-0813-1
80 x 180 x 85
TJ-0818P
TJ-0818
TJ-AG-0818-1
80 x 250 x 85
TJ-0825P
TJ-0825
TJ-AG-0825-1
125 x 125 x 75
TJ-1212P
TJ-1212
TJ-AG-1212-S
125 x 125 x 100
TJ-1212P
TJ-1212
TJ-AG-1212
125 x 175 x 75
TJ-1217P
TJ-1217
TJ-AG-1217
125 x 175 x 100
TJ-1217P
TJ-1217
TJ-AG-1217-1
140 x 170 x 95
TJ-1417P
TJ-1417
TJ-AG-1417
150 x 200 x 100
TJ-1520P
TJ-1520
TJ-AG-1520 TJ-AG-1520-1
150 x 200 x 130
TJ-1520P
TJ-1520
150 x 250 x 100
TJ-1525P
TJ-1525
TJ-AG-1525
150 x 250 x 130
TJ-1525P
TJ-1525
TJ-AG-1525-1
200 x 200 x 130
TJ-2020P
TJ-2020
TJ-AG-2020
200 x 200 x 95
TJ-2020P
TJ-2020
TJ-AG-2020-S TJ-AG-1717-1
175 x 175 x 100
TJ-1717P
TJ-1717
175 x 250 x 75
TJ-1725P
TJ-1725
TJ-AG-1725
175 x 250 x 100
TJ-1725P
TJ-1725
TJ-AG-1725-1
75 x 125 x 75
TJ-0712P
TJ-0712
TJ-AG-0712
75 x 125 x 100
TJ-0712P
TJ-0712
TJ-AG-0712-1
140 x 230 x 90
TJ-1423P
TJ-1423
TJ-AG-1423
175 x 175 x 75
TJ-1717P
TJ-1717
TJ-AG-1717
Mounting plate Plastic Metal
order code
Assembly diagram Screw TJLT-70 Body
Metal mounting plate Plastic mounting plate
Clear cover
TrANsPArENT CoVEr Dimensions (mm) WxHxD 50 x 65 x 55
X
X
TJ-AT-0506
65 x 95 x 55
X
X
TJ-AT-0609
80 x 110 x 45
TJ-0811P
TJ-0811
TJ-AT-0811-S
80 x 110 x 70
TJ-0811P
TJ-0811
TJ-AT-0811
80 x 130 x 70
TJ-0813P
TJ-0813
TJ-AT-0813
80 x 160 x 55
TJ-0816P
TJ-0816
TJ-AT-0816-S
80 x 160 x 90
TJ-0816P
TJ-0816
TJ-AT-0816
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
PlAsTIC ENClosUrEs loCK AND HINGE CoNT.
PlAsTIC ENClosUrEs HINGE • • •
Protection: IP66 (water and dust proof) Temperature range: -40°C to +80°C Materials: ABS Acrulonitrile Butadiene Styrene PC: Poly Carbonate (Transparent version only)
GrEY Door Dimensions (mm)
Mounting plate
WxHxD
Model
order code
200 x 300 x 180
TJ-2030
TJ-KG-2030
300 x 300 x 180
TJ-3030
TJ-KG-3030
400 x 300 x 180
TJ-4030
TJ-KG-4030
EN-5
GrEY Door Dimensions (mm)
Mounting plate
WxHxD
Model
order code
ClEAr Door
200 x 300 x 180
TJ-2030
TJ-MG-2030
Dimensions (mm)
Mounting plate
300 x 300 x 180
TJ-3030
TJ-MG-3030
WxHxD
Model
400 x 300 x 180
TJ-4030
TJ-MG-4030
order code
200 x 300 x 180
TJ-2030
TJ-KT-2030
300 x 300 x 180
TJ-3030
TJ-KT-3030
400 x 300 x 180
TJ-4030
TJ-KT-4030
ECoNoMY PlAsTIC ENClosUrEs These low cost plastic enclosures are ideal for a wide range of electronic housing requirements. The surface fi nish is smooth. External Dimensions (mm) l W H
Description
Manf. Part No.
49 x 35 x 21
A very small enclosure with a press fi t lid and 12x35mm mounting tab on one end
PB-04
order code
48 x 34 x 28
A very small enclosure with a press fi t lid and 12x34mm mounting tab on one end
PB-05B
83 x 53 x 30
Screw mount lid
PB-08
121 x 70 x 47
Screw mount lid and moulded stand offs for PBC mounting
PB-15
ClEAr Door Dimensions (mm)
Mounting plate
WxHxD
Model
200 x 300 x 180
TJ-2030
TJ-MT-2030
300 x 300 x 180
TJ-3030
TJ-MT-3030
400 x 300 x 180
TJ-4030
TJ-MT-4030
Black supplied as standard. Other colours are available on special order.
PlAsTIC ENClosUrEs loCK AND HINGE • Protection: IP66 (water and dust proof) • Temperature range: -40°C to +80°C • Materials: ABS and PC (Transparent version only)
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
PLASTIC / ALUMINIUM ENCLOSURES Aluminium Enclosures - Aluminium Chassis Cases and Covers E
D
10mm 0.40in
Key Features • Spot welded heavy duty construction chassis. • Natural finish • Cover holes are punched with 4 holes – 3/16” diameter. • Hardware not provided, please order separately - Part number 1421J6 (Pkg. of 6, 6-32 Philips head screws).
C
A
B
"D" & "E" Dimensions are hole center to center
A
B
Dimensions C
D
E
inch mm
4 102
4 102
2 51
36. 92
3 76
1444-6
1434-6
.040
inch mm
6 152
4 102
2 51
56. 143
3 76
1444-8
1434-8
.040
inch mm
7 178
5 127
2 51
66. 168
3 76
1444-12
1434-12
.040
inch mm
8 203
4 102
1 25
66. 168
3 76
1444-9
1434-10
.040
inch mm
8 203
4 102
2 51
66. 168
3 76
1444-10
1434-10
.040
inch mm
9 229
5 127
2 51
66. 168
3 76
1444-14
1434-14
.040
inch mm
10 254
6 152
1 25
96. 244
4 102
1444-15
1434-16
.040
inch mm
10 254
6 152
2 51
96. 244
4 102
1444-16
1434-16
.051
inch mm
12 305
8 203
2 51
116. 295
6 152
1444-22
1434-22
.051
inch mm
12 305
8 203
3 76
116. 295
6 152
1444-24
1434-22
.051
inch mm
12 305
10 254
2 51
116. 295
8 203
1444-29
1434-29
.040
inch mm
13.5 343
5 127
2 51
131. 333
3 76
1444-18
1434-18
.051
inch mm
16 406
8 203
2 51
156. 397
6 152
1444-26
1434-26
.051
inch mm
16 406
8 203
3 76
156. 397
6 152
1444-28
1434-26
.040
inch mm
17 432
4 102
3 76
166. 422
6 152
1444-20
1434-20
.051
inch mm
17 432
10 254
2 51
166. 422
8 203
1444-30
1434-30
.051
inch mm
17 432
10 254
3 76
166. 422
8 203
1444-32
1434-30
.051
inch mm
17 432
10 254
4 102
166. 422
8 203
1444-33
1434-30
In Thick
Units
.040
EN-6
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Manf. Part No. Aluminium Chassis Cover
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
ALUMINIUM ENCLOSURES AlUMINIUM ENClosUrEs 1455 series - Extruded With Metal End Plates or Plastic Panels
C A
Metal plates: (open view) Clear anodised version
B
Key Features • Designed to house P.C. boards or for equipment interfacing. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. Visit our web site for drawings of these extrusions for complete detail by part number. • Rugged body constructed from extruded aluminium with a minimum thickness of .06” (1.5 mm). • Extruded body includes a sliding removable “belly” plate - except in the smaller “C” sizes (ie: 1455C801 & 1455C1201) • Available in a clear or black anodised fi nish.
• Includes two aluminium end panels (matched to aluminium body nish) and two black plastic bezels. These plastic bezels can be optionally installed to create a modern look. Or two easy to machine, black solid ABS plastic end panels. Panels are one piece with integral bezel. • Hardware and self-adhesive rubber feet included. • Replacement screws for clear anodised version - 1455MS100 - Package of 100 • Replacement screws for black anodised version - 1455MS100BK - Package of 100
Manf. Part No. Metal End Plates Clear Anodised Black Anodised
Dimensions
Units
Black anodised version (assembled view)
Plastic panels (open view) Clear anodised version
Manf. Part No. Plastic End Panels Clear Anodised Black Anodised
A
B
C
inch mm
3.15 80
2.125 54
0.91 23
1455C802
1455C802BK
1455C801
1455C801BK
inch mm
4.72 120
2.125 54
0.91 23
1455C1202
1455C1202BK
1455C1201
1455C1201BK
inch mm
4.72 120
3.07 78
1.06 27
1455J1202
1455J1202BK
1455J1201
1455J1201BK
inch mm
4.72 120
3.07 78
1.69 43
1455K1202
1455K1202BK
1455K1201
1455K1201BK
inch mm
4.72 120
4.06 103
1.20 30.5
1455L1202
1455L1202BK
1455L1201
1455L1201BK
inch mm
4.72 120
4.06 103
2.09 53
1455N1202
1455N1202BK
1455N1201
1455N1201BK
inch mm
6.30 160
3.07 78
1.06 27
1455J1602
1455J1602BK
1455J1601
1455J1601BK
inch mm
6.30 160
3.07 78
1.69 43
1455K1602
1455K1602BK
1455K1601
1455K1601BK
inch mm
6.30 160
4.06 103
1.20 30.5
1455L1602
1455L1602BK
1455L1601
1455L1601BK
inch mm
6.30 160
4.06 103
2.09 53
1455N1602
1455N1602BK
1455N1601
1455N1601BK
inch mm
6.30 160
6.30 160
1.20 30.5
1455R1602
1455R1602BK
1455R1601
1455R1601BK
inch mm
6.30 160
6.30 160
2.10 51.5
1455T1602
1455T1602BK
1455T1601
1455T1601BK
inch mm
8.66 220
4.06 103
1.20 30.5
1455L2202
1455L2202BK
1455L2201
1455L2201BK
inch mm
8.66 220
4.06 103
2.09 53
1455N2202
1455N2202BK
1455N2201
1455N2201BK
inch mm
8.66 220
6.30 160
1.20 30.5
1455R2202
1455R2202BK
1455R2201
1455R2201BK
inch mm
8.66 220
6.30 160
2.10 51.5
1455T2202
1455T2202BK
1455T2201
1455T2201BK
ACCEssorY FlANGE KITs - for use with 1455 series Use With Units series
Dimensions Height Width
Manf. Part No. Clear Anodised Black Anodised
1455C
inch mm
1.24 32
2.125 54
1455C F
1455C F B K
1455J
inch mm
1.39 35
3.07 78
1455J F
1455J F BK
1455K
inch mm
2.02 51
3.07 78
1455K F
1455K F B K
1455L
inch mm
1.53 39
4.06 103
1455L F
1455L F BK
1455N
inch mm
2.42 62
4.06 103
1455NF
1455NF B K
1455R
inch mm
1.53 39
6.30 160
1455R F
1455R F B K
1455T
inch mm
2.43 62
6.30 160
1455T F
1455T F B K
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Features • Designed to convert the enclosures where shelf or wall mounting is required. • Flanges are .064” (1.6mm) thick aluminium foot “L” brackets and attach to each end, replacing the plastic and/or aluminium end panels. Finish available in both clear & black to match enclosure. • Sold in pairs. Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
EN-7
ALUMINIUM ENCLOSURES WATErTIGHT, THICKWAll DIECAsT AlUMINIUM ENClosUrEs
• • • •
DIECAsT AlUMINIUM ENClosUrEs
Shallow lid, deep body, thermoplastic gasket Integrated 1.7 mm recess in lid for membrane keypads and front panels Clip-on design covers Degree of protection: NEMA 4X, IP67
H
Dimensions (inches) W
D
Manf. Part No.
Colour: Gray (R190 Series)
EN-8
• • •
Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Four M3.5 x 0.6 mm stainless steel, Philips head, machine screws secure lid into factory tapped holes. Designed to meet IP54
H
Dimensions (inches) W
D
Manf. Part No.
Colour: Unfi nished
4.30
5.50
2.40
R190-110-000
2.36
2.17
1.02
5.90
7.10
2.40
R190-150-000
3.15
2.17
0.83
1550P
5.10
8.70
2.80
R190-132-000
3.50
1.38
1.02
1550A
5.10
6.30
2.80
R190-130-000
4.51
2.25
1.02
1550B
4.30
7.90
2.40
R190-112-000
4.51
2.52
2.01
1550D
4.53
3.54
2.01
1550C
1550QBK
6.70
7.90
2.40
R190-170-000
5.90
10.20
2.40
R190-152-000
6.70
11.00
2.40
R190-172-000
H
Dimensions (inches) W
D
Manf. Part No.
Colour: Gray (R191 Series) 1.90
2.90
1.30
R191-052-000
1.90
3.90
1.30
R191-054-000
2.70
3.90
1.90
R191-070-000
2.70
5.50
1.90
R191-072-000
3.50
6.30
2.40
R191-092-000
2.70
7.10
1.90
R191-074-000
5.90
7.10
3.50
R191-150-000
6.70
7.90
3.50
R191-170-000
7.90
9.10
4.70
R191-200-100
3.50
9.80
2.40
R191-094-000
5.90
10.20
3.50
R191-152-000
7.90
13.00
4.70
R191-202-100
3.50
4.70
2.40
R191-090-000
6.70
11.00
3.50
R191-172-000
1550Q
Colour: Black 2.36
2.17
1.02
3.15
2.17
0.83
1550PBK
3.50
1.38
1.02
1550ABK
4.51
2.25
1.02
1550BBK
4.51
2.52
2.01
1550DBK
4.53
3.54
2.01
1550CBK
WATErTIGHT, lIGHT DUTY DIECAsT AlUMINIUM ENClosUrEs
• Lap joint construction with a self-adhesive, EVA foam gasket for the lid provides protection against access of dust and water. • Designed to meet IP66
H
Dimensions (inches) W
D
Manf. Part No.
Colour: Unfi nished
• • •
Instant installation & replacement with a snap-on device (clicks into place) Thermoplastic gasket Lid screws are hidden on the underneath of the base, allowing use of the entire front for keypads, displays, etc. Degree of protection: NEMA 4X, IP67
H
Dimensions (inches) W
D
Manf. Part No.
Colour: Light Gray
2.36
2.17
1.02
3.15
2.17
0.83
1550WQ 1550WP
3.50
1.38
1.02
1550WA
4.51
2.25
1.02
1550WB
4.51
2.52
2.01
1550WD
4.53
3.54
2.01
1550WC
1550WQBK
Colour: Black 2.36
2.17
1.02
3.15
2.17
0.83
1550WPBK
3.50
1.38
1.02
1550WABK
3.50
5.10
2.70
R240-092-000
4.51
2.25
1.02
1550WBBK
4.30
7.10
2.70
R240-112-000
4.51
2.52
2.01
1550WDBK
5.10
7.80
2.70
R240-132-000
4.53
3.54
2.01
1550WCBK
Wellington +64 4 915 9500
Christchurch +64 3 355 4545
Auckland +64 9 443 9500
www.activecomponents.com
sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
dIN RAIL / HARd CASES DIN rAIl PCB HolDErs The M-512 Series from WECO is a modular housing concept designed to fi t a large range of PCB sizes to the standard DIN rail system. (DIN EN50 022/-035/-045)
r sErIEs CAsEs rx sErIEs (FlAME rETArDANT)
22.5 (.89) + 0.15 (.006) 11.5 (.45) + 0.2 (.008)
CODE: Side section
W
11 Intermediate section
22 Intermediate section
45 (1.80) + 0.3 (.012)
45
11.5 (.45) + 0.2 (.008) 13.75 (.54) + 0.1 (.004)
The system consists of side and intermediate elements as well as DIN specifi cation snap-fi tting moulding feet. All individual housing parts interlock to form a vibration-resistant assembly.
Intermediate section
13 Side section
11 Mounting foot
00
EN-9
CODE: see “How to order” box
Serpac’s R series cases are designed to provide top of the line protection at affordable prices. They are watertight, airtight, dustproof and crush resistant to keep your valuable equipment safe from all the elements. Available in a variety of colours and sizes, Serpac has the case just right for you. Serpac cases satisfy Mil-Spec 810F and IP Standards 67. All Serpac R-Series cases come with an unconditional lifetime guarantee.
PCB DIMENsIoNs • Board width must be 4mm less than the chosen housing width. • Length can be determined as follows: Overall module length minus 3mm = PCB length (plus tolerances indicated above) Material • Polyamide, grey self-extinguishing to UL 94, V-2 • Temperature limits (minimum values): • Short-time - 140°C/284 F • Continuous - 80°C/176F • Cold-Resistant - -40°C/-40F
Designed to provide superior protection under the harshest conditions, our EXTREME RX Series cases are moulded in fi re retardant material giving extra protection in addition to the durability of our Extreme RX Series. Available in a variety of sizes, the EXTREME RX Series cases are tough enough to survive any adventure. Serpac cases satisfy Mil-Spec and IP Standards 67.
Accessories Side walls, covers and symbol carriers are available. For more information, please contact us. Accuform foam
Adjustable padded divider
Aluminium panel kits
*The 76mm wide elements are the standard range.
orDErING INForMATIoN: M-512
-
1
01 11 2
3.
3
Type-Designation 1.
Empty Module Housing -Type: M-512
2.
Width (W) Side-and intermediate elements (mounting feet have a lever with corresponding length): 76m 01* 90mm 02 104mm 03 118mm 04
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Housing Elements: Side Element 11 Intermediate. el 22,5mm 22 Intermediate el. 45mm 45 Intermediate el. 13,75mm 13 Mounting foot 00
Latches with metal locks
Latches with plastic locks
Colours
* Black
International orange (SOLAS)
Safety yellow (OSHA)
Gunmetal grey
Please contact us for part numbers and further information.
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
Custom colours also available
ac fans
ebm-papst, the world’s leading source for engineered air movement solutions, provides a “total solution” approach to your cooling requirements using our extensive in-house resources. Custom assemblies are designed by ebm-papst engineers to your specifications for a wide range of applications. Sheet metal fabrication and finishing / painting is performed on emb-papst extensive line
of state-of-the-art equipment, ensuring superior quality and maximum flexibility in the manufacturing process. Custom assembly incorporating ebmpapst air movers, custom PCBs, power supplies, electronic filters, air filters, wire harnesses, labelling, fasteners / connectors / accessories, and more is performed on site.
Tubeaxial AC Fans 4000N SERIES
EN-10
Features • Metal housing and impeller • Clockwise rotation viewed from rotor • Electrical connection w/ LZ120 plug & cord set or soldered • Terminals with 2 at pins 2.8x5.0mm • 4.3mm mounting holes
Recommended Manufacturers Accessories • Plastic finger guard: LZ30-5, LZ30P • Metal finger guard: LZ30 • Screen/bracket: LZ40N and LZ40-1 • Metal mesh filter: LZ60 • Mounting screw clip: LZ210 • Plug and cord set: LZ120 or LZ126
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
119 x 38
115
105.9
18.0
3100
119 x 38
115
105.9
18.0
3100
50.0
60
Sintec
4600N
51.0
90
Ball
119 x 38
24
105.9
18.0
4606N
3100
50.0
60
Sintec
119 x 38
230
94.2
19.0
4624N
2650
46.0
55
Sintec
4650N
Max Temp. (°C)
Bearing Type
Manf. Part No.
4000Z SERIES Features • Metal housing and impeller • Electrical connection w/ LZ120 plug & cord set or soldered • Terminals with 2 at pins 2.8x5.0mm • 4.3mm mounting holes
Recommended Manufacturers Accessories • Plastic finger guard: LZ30-5, LZ30P • Metal finger guard: LZ30 • Screen/bracket: LZ40N and LZ40-1 • Metal mesh filter: LZ60 • Mounting screw clip: LZ210 • Plug and cord set: LZ120 or LZ126
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
4530Z
115
70.6
12.0
2000
32.0
70
Sintec
4530Z
4800Z
115
61.8
12.0
1800
28.0
70
Sintec
4800Z
4600Z
115
105.9
18.0
3100
45.0
60
Sintec
4600Z
4650Z
230
94.2
19.0
2650
40.0
50
Sintec
4650Z
4656Z
230
94.2
19.0
2650
40.0
75
Ball
4656Z
4606Z
115
105.9
18.0
3100
45.0
85
Ball
4606Z
Max Temp. (°C)
Bearing Type
Manf. Part No. 8506N
8000N SERIES Features • Metal housing and impeller • Air exhaust over struts • Termination: 12.2” leads • 4.3mm mounting holes • Note: 8500DP has a 5 year warranty
Dimensions (mm) L x W
Voltage (VAC)
Recommended Manufacturers Accessories • Plastic finger guard: LZ32P
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
80 x 38
115
115
115
115
115
115
115
80 x 38
230
230
230
230
230
230
230
8556N
80 x 38
115
115
115
115
115
115
115
8800N
80 x 38
115
115
115
115
115
115
115
8830N
80 x 38
115
115
115
115
115
115
115
8500DP
80 x 38
115
115
115
115
115
115
115
8500N
80 x 38
230
230
230
230
230
230
230
8550N
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
ac fans Tubeaxial AC Fans cont. 4600X SERIES Features • Metal housing and impeller • Air exhaust over struts • Termination: 0.110” terminals • 4.3mm mounting holes • Electrical connection w/ LZ120 plug & cord set or soldered • Note: 4600XP has a 5 year warranty Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No. 4606X
119 x 38
115
106.0
18.0
3100
51.0
90
Ball
119 x 38
230
106.0
18.0
3100
51.0
90
Ball
4656X
119 x 38
115
106.0
18.0
3100
50.0
60
Sintec
4600X
119 x 38
115
106.0
18.0
3100
50.0
60
Sintec
4600XP
119 x 38
230
106.0
18.0
3100
50.0
60
Sintec
4650X
119 x 38
115
57.0
9.0
1750
32.0
75
Sintec
4800X
EN-11
3600 SERIES Features • Metal housing and impeller • Air exhaust over struts • Electrical connection w/ LZ120 plug & cord set or soldered • Termination: 12.2” leads • 4.3mm mounting holes
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Recommended Manufacturers Accessories • Metal finger guard: LZ23 • Plug and cord set: LZ120 or LZ126
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No. 3606
92 x 38
115
44.0
11.0
3200
42.0
75
Ball
92 x 38
230
41.0
12.0
2700
37.0
75
Ball
3656
92 x 38
115
52.0
11.0
3100
41.0
65
Sintec
3600
Max Temp. (°C)
Bearing Type
Manf. Part No. 3906
3900 SERIES Features • Metal housing • Plastic impeller • Termination: 0.110” terminals • Electrical connection w/ LZ120 plug & cord set or soldered • Air exhaust over struts • 4.3mm mounting holes Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Recommended Manufacturers Accessories • Metal finger guard: LZ23 • Plug and cord set: LZ120 or LZ126
Speed (RPM)
Noise dB(A)
92 x 25
115
115
9.0
3150
40.0
80
Ball
92 x 25
230
230
9.0
3150
40.0
80
Ball
3956
92 x 25
115
115
9.0
3150
40.0
80
Sintec
3900
Max Temp. (°C)
Bearing Type
Manf. Part No. 9900
9900 SERIES Features • Metal housing • Plastic impeller • Termination: 0.110” terminals • Electrical connection w/ LZ120 plug & cord set or soldered • Air exhaust over struts • 4.3mm mounting holes Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Recommended Manufacturers Accessories • Plastic finger guard: LZ30-5, LZ30P • Metal finger guard: LZ30 • Screen/bracket: LZ40N and LZ40-1 • Metal mesh filter: LZ60 • Mounting screw clip: LZ210
Speed (RPM)
Noise dB(A)
9900
115
79.5
12.0
2850
42.0
70
Sintec
9906
115
79.0
12.0
2850
42.0
70
Ball
9906
9906L
115
58.9
8.0
2100
34.5
80
Ball
9906L
9956L
230
49.4
9.5
1850
29.5
80
Ball
9956L
9956
230
68.9
14.0
2450
37.0
70
Ball
9956
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
ac fans Tubeaxial AC Fans cont. 5900 SERIES Features • Metal housing • Termination: 0.110” terminals • Plastic impeller • Air exhaust over struts • 4.7mm mounting holes
Dimensions (mm) L x W
EN-12
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No. 5908
127 x 38
115
121.0
17.0
3100
47.0
75
Ball
127 x 38
230
121.2
17.0
2750
47.0
60
Ball
5958
127 x 38
115
121.2
17.0
2750
47.0
75
Ball
5908-105
127 x 38
115
121.2
17.0
3050
46.0
65
Sintec
5900
127 x 38
115
121.2
17.0
3050
47.0
75
Sintec
5900-505
127 x 38
230
105.9
17.0
2700
46.0
55
Sintec
5950
W2S130 Series Features • Metal housing and impeller • Termination: 13.3” leads • Counter-clockwise rotation looking at rotor • 4.3mm mounting holes
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
ø150x55
115
223.6
38.0
ø150x55
230
223.6
39.0
ø150x55
115/230
223.6
38.0
Dimensions (mm) L x W
Noise dB(A)
Max Temp. (°C)
3250
52
3250
53
3250
52
Bearing Type
Manf. Part No.
80
Ball
W2S 130-AA25-01
70
Ball
W2S 130-AA03-01
70
Ball
W2S 130-AA03-49
ø150x55
115
250.1
46.0
3050
60
70
Ball
W2S 130-BM15-01
ø150x55
230
250.1
46.0
3050
60
70
Ball
W2S 130-BM03-01
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
150x172x38
115
230
24.0
3300
57
80
Ball
W2E 142-BB 05-01
150x172x38
230
230
28.0
3300
57
80
Ball
W2E 142-BB 01-01
Manf. Part No.
W2E142 Series Features • Metal housing and impeller • Termination: 0.110” terminals • Air exhaust over struts • 4.3mm mounting holes
Dimensions (mm) L x W
W2E143 Series Features • Metal housing and impeller • Air exhaust over struts • Permanent split capacitor motor & terminals • Termination: 0.110” terminals • 4.6mm mounting holes
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
172 x 51
115
260
26.0
3300
58
70
Ball
W2E 143-AA15-01
172 x 51
115
295
29.0
3300
58
75
Ball
W2E 143-AB 15-01
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
dC fANS TUBEAxIAl DC FANs 4400 sErIEs specifications • Plastic housing and impeller • Air exhausts over struts • Clockwise rotation (looking at rotor) • Termination: 12.2” Leads • Dimensions: 119 x 38mm (length x width) • Max. temp: 70°C • Mounting holes: 4.3mm Airflow (CFM)
Accessories • Fan fi lter: use LZ30P or LZ30 • Plug and cord set: LZ120 or LZ126
Dimensions (mm) l x W
Voltage (VAC)
Power (W)
speed (rPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
119 x 38
12
88.3
2.5
119 x 38
12
108.3
4.2
2700
37
70
Ball
4412L
3300
42
70
Ball
4412M
119 x 38
12
120.7
5.5
3650
46
119 x 38
12
141.3
8.9
4300
49
70
Ball
4412N
70
Ball
119 x 38
24
88.3
2.5
2700
37
70
Ball
4412H 4414L
119 x 38
24
108.3
4.0
3300
42
70
Ball
4414M
119 x 38
24
120.7
5.2
3650
46
70
Ball
4414N 4414H
Manf. Part No.
119 x 38
24
141.3
8.6
4300
49
70
Ball
119 x 38
48
88.3
2.5
2700
37
70
Ball
4418L
119 x 38
48
108.3
4.2
3300
42
70
Ball
4418M
119 x 38
48
120.7
5.2
3650
46
70
Ball
4418N
119 x 38
48
141.3
8.6
4300
49
70
Ball
4418H
Bearing Type
Manf. Part No. 4414FNN
4400FN sErIEs Features • Electronically commutated external rotor motor • Fully integrated commutation electronics • Electronic protection against reverse polarity, blocking and overloading by PTC-resistor partially impedance protected • Fibreglass reinforced plastic
Dimensions (mm) l x W
Voltage (VAC)
Airflow (CFM)
Power (W)
119 x 25
24
117.7
119 x 25
12
132.4
119 x 25
24
132.4
12.0
• • • •
PBTP housing PA impeller Air exhaust over struts Counterclockwise rotation (looking at rotor)
speed (rPM)
Noise dB(A)
Max Temp. (°C)
8.5
4850
52
70
Ball
12.0
5400
55
70
Sintec
4412FNH
5400
55
70
Ball
4414FNH
400 sErIEs Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor)
Dimensions (mm) l x W
recommended Manufacturers Accessories • Metal fi nger guard: LZ29-1
Voltage (VAC)
Airflow (CFM)
Power (W)
speed (rPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
40 x 20
5
5.9
0.9
6000
18
70
Sintec
5912-405
40 x 20
12
5.9
0.9
6000
18
70
Sintec
5912-412
40 x 20
12
5.9
0.9
6000
18
70
Sintec
* 5912-412/2
40 x 20
12
8.0
1.6
8100
29
60
Sintec
5912-412H
40 x 20
24
5.9
1.0
6000
18
70
Sintec
5912-414
40 x 20
24
8.0
1.6
8100
29
60
Sintec
5912-414H
* Includes tachometer
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
EN-13
dc fans Tubeaxial DC Fans cont. 400JHH SERIES Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor)
Dimensions (mm) L x W
Voltage (VAC)
Recommended Manufacturers Accessories • Metal finger guard: LZ29-1
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
40 x 25
12
14.0
3.3
13000
46
60
Ball
5912-412JHH
40 x 25
24
14.0
3.6
13000
46
60
Ball
5912-414JHH
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No. 255N
250 SERIES EN-14
Features • Plastic housing and impeller • Termination: 6.3” leads • Air exhaust over struts • Brushless micro-fan
Dimensions (mm) L x W
Voltage (VAC)
25 x 8
5
1.9
0.4
9000
15
70
Sintec
25 x 8
5
2.6
0.6
12000
28
55
Sintec
255H
25 x 8
12
1.9
0.5
9000
15
70
Sintec
252N
Manf. Part No.
400F SERIES Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor)
Dimensions (mm) L x W
Voltage (VAC)
40 x 10 40 x 10
Recommended Manufacturers Accessories • Metal finger guard: LZ29-1
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
5
4.7
5
5.3
0.7
5400
22
70
Sintec
405F
0.7
6000
26
70
Sintec
405FH
40 x 10
12
3.5
0.6
40 x 10
12
4.7
0.7
4300
17
70
Sintec
412FM
5400
22
70
Sintec
40 x 10
12
5.3
0.8
412F
6000
26
70
Sintec
412FH
40 x 10
24
4.7
0.8
5400
22
70
Sintec
414F
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
500F SERIES Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor)
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
50 x 15
12
12.0
1.0
5000
30
70
Sintec
512F
50 x 15
24
12.0
1.0
5000
30
70
Sintec
514F
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
dc fans Tubeaxial DC Fans cont. 600F SERIES Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor)
Dimensions (mm) L x W
Voltage (VAC)
Recommended Manufacturers Accessories • Metal finger guard: LZ28
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
60 x 15
5
17.1
1.1
4000
27
50
Sintec
605F
60 x 15
12
11.2
0.4
2650
16
70
Sintec
612FL
60 x 15
12
17.1
1.1
3900
27
70
Sintec
612F
60 x 15
24
17.1
1.1
3900
27
70
Sintec
614F
600 SERIES
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
60 x 25
12
60 x 25
12
60 x 25
12
EN-15
Recommended Manufacturers Accessories • Metal finger guard: LZ28
Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
20.0
1.1
24.0
1.6
4100
28
70
Ball
612NM
5100
35
70
Ball
27.0
3.0
612NN
6850
41
70
Ball
612NHH
60 x 25
24
12.4
0.9
2500
16
70
Ball
614NL
60 x 25
24
33.0
3.8
6850
43
70
Sintec
614NGHH
700F SERIES Features • Plastic housing and impeller • Termination: 12.2” leads • Air exhaust over struts • Counterclockwise rotation (looking at rotor) • Fully integrated commutation electronics
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
70 x 15
12
25.9
1.7
5300
36
70
Sintec
712F
Manf. Part No.
6300 SERIES -S Force fans Specifications • Aluminium housing, impeller berglass reinforced plastic PA • Termination: Electrical connection via 2 at pins 3 x 0.5mm • Counterclockwise rotation (looking at rotor) • Air exhaust over struts • Mounting holes: 4.3mm
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
172 x 51
12
353.1
41.0
6000
64
70
Ball
6312/2TDHP
172 x 51
24
353.1
41.0
6000
64
70
Ball
6314/2TDHP
172 x 51
24
417.9
67.0
7000
69
70
Ball
6314/2TDHHP
172 x 51
48
417.9
67.0
7000
69
70
Ball
6318/2TDHHP
172 x 51
48
559.1
150.0
9200
75
65
Ball
6318/2TDH4P
172 x 51
48
353.1
41.0
6000
64
70
Ball
6318/2TDHP
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
blowers S-FORCE RADIAL BLOWERS RL48DC Series • • • •
3-phase fan drive with high degree of smooth operation High pressure build-up Fibreglass-reinforced plastic impeller Fully integrated electronic commutation Dimensions (mm) L x W
EN-16
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
(mm) ø120 x 54mm
24
221.9
78.0
6100
8.2
75
Ball
RER120-26/14/2TDP
(mm) ø120 x 54mm
48
229.5
92.0
6300
8.2
75
Ball
RER120-26/18/2TDP
(mm) ø133 x 91mm
48
332.4
87.0
6000
8.25
65
Ball
RER133-41/18/2TDP
(mm) ø175 x 69mm
48
353.0
42.0
3400
7.3
65
Ball
RER175-42/18-2TDML
(mm) ø175 x 69mm
48
576.8
166.0
5400
8.5
65
Ball
RER175-42/18/2TDP
(mm) ø190 x 69mm
48
635.7
216.0
4600
7.9
65
Ball
RER190-45/18/2TDP
Manf. Part No.
DC FLATPAK® RADIAL BLOWERS RL48DC Series • Plastic spiral housing & blower • Termination: 12.2” leads • Electronically commutated external rotor motor
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
76 x 27
12
16.5
5.0
4400
51.0
70
Ball
RL48-19/12
76 x 27
24
16.5
5.0
4400
51.0
70
Ball
RL48-19/14
Dimensions (mm) L x W
RL90DC Series • DC brushless motor • Mounts in any position for pressurising or evacuating • Termination: 12.2” leads
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
121 x 37
24
24.0
5.0
2500
58.0
75
Ball
RL90-18/14N
RLF100 Series • • • •
Plastic housing & blower wheel Termination: 12.2” leads Electronically commutated external rotor motor Protection against overloading & reverse polarity Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
127 x 25
48
37.7
17.0
5100
60.0
75
Ball
RLF100-11/18
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
blowers DC MOTORIZED IMPELLERS R1G133 Series • • • •
DC brushless Termination: 17.7” leads Recommended inlet ring 9566-2-4013 Plastic impeller Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
ø133 x 60 Round
24
212
28.0
3900
63.0
60
Ball
R1G133-AA17-02
RER125DC Series • DC brushless • Termination: 15.7” leads • Plastic impeller
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
ø138 x 35 Round
12
65
4.5
2650
47.0
75
Ball
RER125-19/12N
R1G175 Series - Backward Curved • Recommended Inlet Ring 9588-2-4013 • Termination: 17.7” leads • Plastic impeller
Dimensions (mm) L x W
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
ø175 x 58
48
330
36.0
3100
65.0
60
Ball
R1G175-AB41-02
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
AC MOTORIZED IMPELLERS RERAC Series • Termination: 16.7” leads
Dimensions (mm) L x W
Voltage (VAC)
ø138 x 40
115
68
18.0
2850
65.0
70
Ball
RER125-19/06
ø 176 x 54
115
161
46.0
3250
68.0
70
Ball
RER160-28/06S
Voltage (VAC)
Airflow (CFM)
Power (W)
Speed (RPM)
Noise dB(A)
Max Temp. (°C)
Bearing Type
Manf. Part No.
ø220 x 71
115
500
96.0
2700
70.0
40
Ball
R2E220-AA44-23
ø220 x 71
230
530
100.0
2550
74.0
40
Ball
R2E-220-AA40-23
Airflow (CFM)
R2E220 Series • Termination: 17.7” leads • Recommended inlet ring 9609-2-4013
Dimensions (mm) L x W
Auckland +64 9 443 9500
Wellington +64 4 915 9500
www.activecomponents.com
Christchurch +64 3 355 4545 sales@activecomponents.com
Victoria +61 3 9775 4778
NSW +61 2 9893 9400
Over one million electronic components online.
EN-17