2011/2012 pure
led
Introduction
Eulum Design was established in 2002 and then
What makes Eulum Design Special?
What are the standards for LEDs?
Because we design and manufacture the current control
At this time, there are no unified standards for the
incorporated in 2005 with the sole intention to design,
very inefficient as they are designed to operate over a wide
circuitry in our luminaires and light engines, we have
manufacturing of LEDs and debate is ongoing as to the
manufacture & supply the highest quality and the most
range of LED configurations. The datasheets for these
the ability to decrease the drive current in response to
proper ways to test them for brightness, color quality, and
innovative luminaires at the most competitive prices. Today
devices often will show an efficiency specification at the
inevitable industry improvements to the efficiencies of
lifetime. At Eulum Design we test all of our luminaires and
we are one of the leading manufacturers of low energy LED
best possible operating condition, while the efficiency for
the LEDs. This allows us to easily maintain constant
LED light engines to ANSI (American National Standards
Lighting products and components, supplying bespoke
your particular LED configuration could be below 70%.
brightness levels within a product line from year to
Institute) standard LM79. This standard defines the latest
systems all over the world.
Eulum Design optimizes each on-board driver for the LED
year. If a luminaire is damaged or our client expands
industry-approved guidelines to test the true output of the
load it is designed to drive, often reaching efficiencies as
their space and additional luminaires are required, we
luminaire both in total circuit efficacy and lumen output by
high as 97%.
can provide new luminaires that produce the same light
an independent laboratory.
Our unique approach to drive circuitry and the thermal
Off the shelf constant current power supplies can be
Future Proofing
control of the diode, enables Eulum Design to offer the most efficient LED modules that will ensure optimum performance throughout their life cycle. Eulum Design’s innovative dimming control devices will allow our customers total flexibility along with full integration into existing installations previously designed for tungsten or fluorescent luminaries. UK & USA Design and Manufacturing Highest quality components Highly experienced professionals
output as the ones installed previously. Our on-board current control circuitry is designed to operate from a standard 24VDC supply that allows simple and efficient power distribution using thousands of readily available power supplies from hundreds of suppliers across the world. The on-board driver allows our designs to directly monitor the temperature of the LEDs, and make adjustments to the current control to ensure a long lifetime, even under fault conditions such as an undersized heatsink.
All Eulum Design luminaires comply fully to EN60598-1 and are tested to ANSI LM79. Eulum Design is an ISO9001 registered firm. Eulum Design takes it’s ecological responsibilities seriously and as such we: Lead free solder in compliance with RoHS requirements All Aluminium used has a minimum 20% recycled element All packaging is recyclable No harmful solvents are used and where possible the use of solvents is avoided
EU-D46/1-M80
EU-45x42/3-M80
EU-D216/96L
EU-483x20/84 | EU-483x20/42
Ø46mm LED Module
45x42mm LED Module
254x203mm LED Module
483x20mm LED Module
Designed for ease of installation the EU-D46/1-M80 is the ultimate 1,000lm single point source LED engine, with the most advanced features:
Designed for ease of installation the EU-45x42/3-M80 is the ultimate 3,000lm LED engine, with the most advanced features:
Designed for ease of installation the EU-D216/96L is the ultimate retrofit LED engine, with the most advanced features:
Designed for ease of installation the EU-483x20 range of linear LED boards, with thermal transfer tape applied for maximum thermal transfer.
• 24vDC constant voltage input.
• 0-10v Dimming input direct on-board
• 0-10v Dimming input direct on-board
• Thermal protection of the diode via feed back circuit which will reduce the current by 1% for each 1°C increase over 70°C measured on the substrate so as to ensure the life of the LED.
• Thermal protection of the diode via feed back circuit which will reduce the current by 1% for each 1°C increase over 70°C measured on the substrate so as to ensure the life of the LED. • Aluminium dielectric substrate to provide better ‘heat spreading’ with superior thermal resistance to standard aluminium PCB’s. • A die-cut thermal transfer material is available to create optimum thermal transfer from the LED module to the heat sink. • Secondary optics available for 15° and 30° beam angles. • Independently tested to ANSI LM79 • Replacement for 26w TCDE & 20w HIT
• Aluminium dielectric substrate to provide better ‘heat spreading’ with superior thermal resistance to standard aluminium PCB’s. • A die-cut thermal transfer material is available to create optimum thermal transfer from the LED module to the heat sink. • Independently tested to ANSI LM79 • Replacement for 2x26w TCDE & 35w HIT
• 90-230vAC input. •T riac Dimming or 0-10v Dimming options •R emote 90min or 3hr Emergency kit available •4 layer FR4 substrate with heat spreaders on top and bottom • I solating base in white PC and transparent PC cover (optional) • Uniformly even lit appearance • Independently tested to ANSI LM79 •R eplacement for 28w TCDDE & 26w TCDE
• Independently tested to ANSI LM79 • Replacement for T5 fluorescent lamps
3
Koya-S1|P1 LED
Koya-R2 LED
5
Koya-S1|P1 Surface & Pendant mounted LED luminaire
D
H
Lamps
Suitable for wall or ceiling mounting
Luminaire Efficacy lm/w
CRI
Code
Code
Koya-R2 Plaster-In recessed mounted LED luminaire Suitable for trimless installation in plasterboard ceilings 8-16 mm
Pendant length 1500mm
Koya-S1
silver
white
Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné
300
75
14w LED
49
80+
KS1OSIG-1-R01-WW
KS1OWIG-1-R01-WW
Luminaire body made of white coated or anodised extruded aluminium Diffuser from Opal Acryl-Satiné
300
75
14w LED
55
80+
KS1OSIG-1-R01-NW
KS1OWIG-1-R01-NW
90-230vAC Input with Triac dimming
90-230vAC Input with Triac dimming
Koya-P1
silver
white
300
75
14w LED
49
80+
KP1OSIG-1-R01-WW
KP1OWIG-1-R01-WW
300
75
14w LED
55
80+
KP1OSIG-1-R01-NW
KP1OWIG-1-R01-NW
Luminaire Efficacy lm/w
CRI
Code
14w LED
49
80+
KR2OWIG-1-R01-WW
14w LED
55
80+
KR2OWIG-1-R01-NW
D1
D2
Lamps
300
316
300
316
white
60
max 1500
H
30
75
EVG 100
max 20mm
min 10mm
D1 D2
D2
D
D
Koya-O1|P2 LED
Iza-S2|P2 LED
7
Koya-O1|P2 Surface & Pendant mounted LED luminaire Suitable for wall or ceiling mounting
D
H
Lamps
Luminaire Efficacy lm/w
CRI
Code
Iza-S2|P2 Surface & Pendant mounted LED luminaire
L
H
Lamps
Suitable for wall or ceiling mounting
Luminaire Efficacy lm/w
CRI
Code
Pendant length 1500mm Diffuser from Opal Acryl-Satiné with silver/grey coated ‘contrast’ fixing ring
Koya-O1 75
14w LED
49
80+
KO1OSIG-1-R01-WW
Pendant length 1500mm Luminaire body made of white oe silver/grey coated extruded aluminium
Iza-S2
400
300
75
14w LED
49
80+
IS2OEIG-1-R01-WW
90-230vAC Input with Triac dimming
400
75
14w LED
58
80+
KO1OSIG-1-R01-NW
Diffuser from Opal Acryl-Satiné
300
75
14w LED
55
80+
IS2OEIG-1-R01-NW
silver
90-230vAC Input with Triac dimming
Iza-P2 300
75
14w LED
49
80+
IP2OEIG-1-R01-WW
300
75
14w LED
55
80+
IP2OEIG-1-R01-NW
silver
Koya-P2 400
75
14w LED
49
80+
KP2OSIG-1-R01-WW
400
75
14w LED
58
80+
KP2OSIG-1-R01-NW
silver
silver
L2
60
min 70
max 1500
max 1500
75
75
H
L1
L
5,5
D
D
H
L
L1
Iza-R2 LED
Iza-O1 LED
9
Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné 90-230vAC Input with Triac dimming
A
C1
C2
Lamps
Luminaire Efficacy lm/w
CRI
Code
Iza-O1 Surface mounted LED luminaire
Luminaire Efficacy lm/w
CRI
14w LED
49
80+
IO1OSIG-1-R01-WW
14w LED
58
80+
IO1OSIG-1-R01-NW
L
H
Lamps
300
75
300
75
Suitable for wall or ceiling mounting silver
340
365
344
14w LED
49
80+
IR2OEIG-1-R01-WW
340
365
344
14w LED
55
80+
IR2OEIG-1-R01-NW
Diffuser from Opal Acryl-Satiné with silver/grey coated ‘contrast’ strap 90-230vAC Input with Triac dimming
EVG
A C1 30 max 35mm
min 10mm
Code
silver
107
Iza-R2 Plaster-In recessed mounted LED luminaire Suitable for trimless installation in plasterboard ceilings 8-16 mm
C2
L
C1 × C2
H
L
Utsu-S2 LED
Utsu-R2|R3 LED
11
90-230vAC Input with Triac dimming
H
Lamps
Luminaire Efficacy lm/w
CRI
Code
Code
Utsu-R2|R3 Plaster-In recessed mounted LED luminaire
A
H
Lamps
Suitable for trimless installation in plasterboard ceilings 8-16 mm silver
white
300
75
14w LED
49
80+
US2OSIG-1-R01-WW
US2OWIG-1-R01-WW
300
75
14w LED
55
80+
US2OSIG-1-R01-NW
US2OWIG-1-R01-NW
Luminaire Efficacy lm/w
CRI
Code
Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné
Utsu-R2 260
100
14w LED
49
80+
UR2OEIG-1-R01-WW
90-230vAC Input with Triac dimming
260
100
14w LED
55
80+
UR2OEIG-1-R01-NW
white
Custom lengths and systems upon request L1
L2
Lamps
Luminaire Efficacy lm/w
CRI
Utsu-R3
Code
Code
3000K
4000K
970
971
30w LED
50
80+
UR3OEIG-2-L03-WW
UR3OEIG-2-L03-NW
1455
1456 44w LED
50
80+
UR3OEIG-3-L03-WW
UR3OEIG-3-L03-NW
2420
2421
50
80+
UR3OEIG-5-L03-WW
UR3OEIG-5-L03-NW
72w LED
EVG
75
Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from microprismatic screen / Opal Acryl-Satiné
L
max=16mm min=8mm
55
56 × L2
56
30
L
EVG 100
max 20mm
min 10mm
5,5
H
L
A
max=140mm
Utsu-S2 Surface mounted LED luminaire Suitable for wall or ceiling mounting
100 L1 L2
Utsu-S3|P3 LED
Sienna-R1 LED
13
Utsu-S3|P3 Surface & Pendant mounted LED luminaire Suitable for wall or ceiling mounting
L1
Lamps
Luminaire Efficacy lm/w
CRI
Code
Code
Sienna-R1 Recessed-Mounted high output LED downlight
Lamps
Suitable for mounting in ceiling tiles or plasterboard, 10-30mm
Luminaire Efficacy lm/w
CRI
Code
Pendant length 1500mm Luminaire body made of white or silver/grey coated extruded aluminium
Utsu-S3
3000K
4000K
Luminaire body made of die-cast Aluminium
970
30w LED
50
80+
US3OSIG-2-L03-WW
US3OWIG-2-L03-NW
Optical system with interchangeable glass accessories
40w LED
54
80+
SIRWRG-1-P03-WW
Diffuser from microprismatic screen / Opal Acryl-Satiné
1455
44w LED
50
80+
US3OSIG-3-L03-WW
US3OWIG-3-L03-NW
58
80+
SIRWRG-1-P03-NW
72w LED
50
80+
US3OSIG-5-L03-WW
US3OWIG-5-L03-NW
Thermal control via ‘Coliseum’ Heat Sink and Synjet cooler
40w LED
2420
3000K
4000K
Remote 24vDC power supply required Custom lengths and systems upon request
Utsu-P3 970
30w LED
57
80+
UP3OSIG-2-L03-WW
UP3OWIG-2-L03-NW
1455
44w LED
57
80+
UP3OSIG-3-L03-WW
UP3OWIG-3-L03-NW
2420
72w LED
57
80+
UP3OSIG-5-L03-WW
UP3OWIG-5-L03-NW
L2 min 70
L2 100
max 1500
75
75
55
55 L1
L1
On-board Active thermal feed back to reduce the drive current in the event of overheating 0-10v Dimming Input Remote 24vDC Power Supply
White
Delos-R1|R2 LED
Eva-T1|T2 LED
15
Delos-R1|R2 Recessed-Mounted LED downlight Suitable for mounting in ceiling tiles or plasterboard, 10-30mm
Lamps
Luminaire Efficacy lm/w
CRI
Code
Delos-R1 10w LED
65
80+
DERWRG-1-P01-WW
Thermal control via Pin Heat Sink
10w LED
70
80+
DERWRG-1-P01-NW
On-board Active thermal feed back to reduce the drive current in the event of overheating
Delos-R1
Remote 24vDC Power Supply
Luminaire Efficacy lm/w
CRI
Beam
13w LED
62
83+
20°
20° and 40° optics
13w LED
69
83+
Integral 24vDC power supply required
13w LED
62
13w LED
69
Lamps
Suitable universal 3 circuit track mounting
Plaster-In and Directional variants Luminaire body made of machined Aluminium, thermal alloy 6063
0-10v Dimming Input
Eva-T1|T2 Track mounted LED spotlight
White
White
10w LED
65
80+
DER1WRG-1-P01-WW
10w LED
70
80+
DER1WRG-1-P01-NW
Luminaire body made of white coated extruded / cast aluminium Interchangeable glass cover
Thermal control via Pin Heat Sink On-board Active thermal feed back to reduce the drive current in the event of overheating 0-10v Dimming Input
Code
Code
silver
white
ET1ASIG-1-P01-WW
ET1AWIG-1-P01-WW
20°
ET1ASIG-1-P01-NW
ET1AWIG-1-P01-NW
83+
40°
ET1BSIG-1-P01-WW
ET1BWIG-1-P01-WW
83+
40°
ET1BSIG-1-P01-NW
ET1BWIG-1-P01-NW
silver
white
Eva-T1
Eva-T2 34w LED
59
83+
20°
ET2ASIG-1-P01-WW
ET2AWIG-1-P01-WW
34w LED
65
83+
20°
ET2ASIG-1-P01-NW
ET2AWIG-1-P01-NW
34w LED
59
83+
40°
ET2BSIG-1-P01-WW
ET2BWIG-1-P01-WW
34w LED
65
83+
40°
ET2BSIG-1-P01-NW
ET2BWIG-1-P01-NW
Aono-F1 LED
Aono-S1|P1 LED
17
Luminaire Efficacy lm/w
CRI
15w LED
48
80+
AF1FEIG-1-L03-WWG
700
15w LED
53
80+
AF1FEIG-1-L03-NWG
700
15w LED
48
80+
AF1FEIG-1-L03-WWT
700
15w LED
53
80+
AF1FEIG-1-L03-NWT
L
Lamps
700
Integral 24vDC power supply required Custom lengths and systems upon request
Code
silver
38
Aono-S1|P1 Surface & Pendant mounted LED luminaire Suitable for wall or ceiling mounting
Luminaire Efficacy lm/w
CRI
44w LED
50
80+
AS1OERG-3-L03-WW
1470
44w LED
57
80+
AS1OERG-3-L03-NW
1500
550
44w LED
50
80+
AP1OERG-3-L03-WW
1500
550
44w LED
57
80+
AP1OERG-3-L03-NW
L1
L2
lamps
1760
1470
Diffuser from Opal Acryl-Satiné
1760
Remote 24vDC power supply required
Pendant length 1500mm Luminaire body made of white or silver/grey coated extruded aluminium
Code
silver
Custom lengths and systems upon request
39
460
L
308
50 155
L2
320
50 38
L
L2
38
70
1-Längig I 1-Length: DL
39
Luminaire body made of white or silver/grey coated extruded aluminium Diffuser from Opal Acryl-Satiné
L1 2-Längig I 2-Length: DL
.
Aono-F1 Desk mounted LED luminaire Base or clamp mounting
min 20mm max 60mm
DL
38
1200/1500 L1
38
L1
Salzburg-R1|R2 LED
Mito-S1|R1 LED
19
Salzburg-R1|R2 600x600mm Recessed high output LED luminaire Suitable for mounting in ceiling tiles or plasterboard 10-30mm
L
H
Lamps
Luminaire Efficacy lm/w
CRI
Code
Luminaire body made of Powder coated Steel, RAL9016 Involute reflectors from high efficiency ‘White Optics’ Material
Salzburg-R1 595
595
30w LED
47
80+
SAOWIG-3-L03-WW
Opal PMMA diffuser Optic (R1)
595
595
30w LED
50
80+
SAOWIG-3-L03-NW
High output Louvre optic system with interchangeable glass accessory (R2) Thermal control via extruded Aluminium Heat Sink, thermal alloy 6063 0-10v Dimming option Integral 24vDC Power Supply
white
Salzburg-R2
white
595
595
39w LED
59
83+
SALWIG-3-L43-WW
595
595
39w LED
65
83+
SALWIG-3-L43-NW
595
595
62w LED
69
83+
SALWIIG-3-L33-WW
595
595
62w LED
75
83+
SALWIG-3-L33-WW
Mito-S1|R1 Surface & Recessed mounted LED luminaire Suitable for wall or ceiling mounting
Lamps
Luminaire Efficacy lm/w
CRI
Code
Suitable for metal or plasterboard ceilings (max 18mm) Luminaire body made of white coated or anodised aluminium
Mito-S1 21w LED
68
80+
MIRERG-1-R22-WW
Diffuser from 4mm Opal Acryl-Satiné
21w LED
75
80+
MIRERG-1-R22-NW
Remote 24vDC power supply required
Mito-R1 21w LED
68
80+
MISERG-1-R22-WW
21w LED
75
80+
MISERG-1-R22-NW
On-board Active thermal feed back to reduce the drive current in the event of overheating 0-10v Dimming Input
white
white
www.eulum.com info@eulum.com
Eulum Design LTD
Eulum Design LLC
Eulum Design s.r.o.
All products in the catalogue
10 Takeley Business Centre
1456 Ferry Road
Veleslavinova 8
are sold subject to Eulum
Dunmow Road
Suite 502
746 01 Opava
Design Terms and Conditions.
Takeley
Doylestown
CZ
Due to our policy of continual
Essex
PA 18901
product improvement we
CM22 6SJ
US
reserve the right to amend the specification of these products
UK +44 (0) 1279 870027
+1 215 290 8830
+420 608 869 237
at any time.