Nordic Roads - Slitestål produktkatalog

SLITESTÅL ProduktKatalog

Steel solutions for tough conditions

nordicroads.as

INNHOLD 05 | FUTURA 06 | FUTURA DRP HL2 FOR CAT-J 09 | FUTURA FC2 11 | TWISTER DRP FOR ESCO SUPERV® 12 | TWISTER T2 DRP FOR ESCO SV2© 13 | SLITEPLATER 14 | DOSERSKJÆR 15 | FORSTYKKER/FRONTER 16 | HALVPILSEGMENTER 18 | SKUFFEBESKYTTELSE 20 | RIPPERE 21 | GRUVEDRIFT 24 | GRAVE- OG HJULLASTERSKUFFER 25 | UNDERSTELL 26 | MEISLER/SPETT 27 | SLITERIBBER 28 | SKJÆRESTÅL

Steel Steel solutions solutions for for tough tough conditions. conditions

33

4

HØY YTELSE

SLANK PROFIL

KONKURRANSEDYKTIGE PRISER

Våre tannholdere og tannspisser er et resultat av 40 års erfaring

+68% stålutnyttelse Tennene forblir skarpe

i bransjen. CAT–J tannsystemet er tilgjengelig for alle maskinstørrelser, fra J200 til J800.

Designet er optimalisert med hensyn på penetrasjon, slitasjemønster og utnyttelse av stålet.

Mer enn 68% i utnyttelse.

Slank profil for maksimal penetrasjon.

Ribber langs siden for beskyttelse av pinnen.

Høy ytelse og lang levetid for konkurransedyktige priser

Ribber på oversiden for minimalisering av slitasje og forbedring av tannens levetid.

God design som gjør at tennene forblir skarpe.

Mer gods sammenlignet med tradisjonelle tenner.

FUTURA tenner har 20% mer stål enn andre produkter i markedet.

Tennene er gjennomherdet 530 HB.

Mer stål på tennene i områder som er utsatt for slitasje

FUTURA TANN MOT STANDARD TANN Mer stål i sideribbene til ekstra skarphet

Mer stål i midtribbene bidrar til ekstra skarphet

Mer stål i tannspissen og ribbene

STANDARD

FUTURA – Optimalisert penetrasjon

Slitasjefaktor:

Slitasjefaktor:

Penetrasjon:

Penetrasjon:

Slag:

Slag:

Slitasjevekt: Estimert Slitasjevekt:

1,25 Kg / 2,75 Lbs

Slitasjevekt:

2,80 Kg / 6.16 Lbs

43%

Estimert Slitasjevekt:

68%

115 mm / 4,53” 200 mm / 7,87”

127 mm / 5,00” 210 mm / 8,27”

Steel solutions for tough conditions

5

UNIVERSAL slagfri låsepinne.

100% kompatibel med Caterpillar adaptere med horizontal låsepinne HL2

Part#

Mindre slark Økt sikkerhet sammenlignet med den tradisjonelle låsepinnen Lett å installere og fjerne Kompatibelt med OEM adaptere

OEM pins OEM retainers 107-3308 8E-6259 132-4766 3G-9609 9J-2308 149-5733 8E-6358 8E-6359 114-0358 3G-9548 9J-2358 114-0359 7T-3408 8E-8409 116-7408 116-7409 8E-0468 8E-8469 114-0468 107-3469 6Y-8558 8E-5559 107-3378 3G-9559 1U-1558 107-8559 6I-6608/ 6I-6609 113-9608 113-9609 4T-4708 4T-4707 113-4708 113-4709 134-1808 101-2874 102-0101 134-1809

FC300HL2 FC350HL2 FC400HL2 FC450HL2

FUTURA DRP HL2 FOR CAT-J

FC550HL2

Size 30 35 40 45

Slagfri låsepinne.

100% kompatibel med Caterpillar adaptere med horizontal låsepinne.

55

UNIVERSAL slagfri låsepinne.

1 2 3 Clack!

100% kompatibel med Caterpillar adaptere med horizontal låsepinne FC600HL2

FC700HL2 FC800HL2

60 70 80

FUTURA - DRP CATERPILLAR FOR GRAVERE RC

RE

P

• Mindre slark 􀀃Rock

WTL

Penetration

Rock Chisel

HL2

Twin Tiger Long

Exploder

• Økt sikkerhet sammenlignet med Mindre slark

FC300HL2

den tradisjonelle låsepinnen􀀃

Økt sikkerhet sammenlignet • Lettden å installere og fjerne 􀀃låsepinmed tradisjonelle • Kompatibelt med OEM adaptere 􀀃 nen Lett å installere og fjerne Kompatibelt med OEM adaptere Kg Lb

2,7 4,2 5,9 8,8 11,6 17,7 30,5 40,6 57,2 84,7

Part#

6 FC200 RC 9 FC250 RC 13 FC300 RC 19 FC350 RC 26 FC400 RC 39 FC450 RC 67 FC550 RC 89 FC600 RC 126 FC700 RC 186 FC800 RC

OEM

Size

Kg Lb

Size

Kg

Lb

Part#

OEM

Size

Kg Lb

1U-3302 RC 125-8309 1U-3352 RC 119-9359 7T-3402 RC 124-7409 1U-3452 RC 116-7459 1U-3552 RC 113-0559 6I-6602 RC 119-9609 4T-4702 RC -

20 25 30 35 40 45 55 60 70 80

5,6 12 FC300 RE 1U-3302 RC 125-8309 30

3 7 10 14 21 29 40 60 82 121

FC200 P FC250 P FC300 P FC350 P FC400 P FC450 P FC550 P FC600 P FC700 P FC800 P

1U-3209 9J-4259 9J-4309 9J-4359 6Y-7409 9W-8459 9W-8559 7I-7609 4T-4709 117-6809

20 25 30 35 40 45 55 60 70 80

1,8 4 FC200 WTL 1U-3202 WTL 135-8208 20

70

1,4 3,2 4,5 6,5 9,7 13,1 18,2 27,3 37,4 54,8

Size

PHC

VTL

Part#

OEM

8,3 18 FC350 RE 1U-3352 RC 119-9359 35

10,9 24 FC400 RE 7T-3402 RC 124-7409 40 15,8 35 FC450 RE 1U-3452 RC 116-7459 45 28,1 62 FC550 RE 1U-3552 RC 113-0559 55 40,5 89 FC600 RE 6I-6602 RC 119-9609 60 55,5 122 FC700 RE Kg Lb

Part#

OEM

13,0 29 FC450 VTL 1U-3452 TL, 7T-8459 45

Vector Tiger Long

20,5 45 FC550 VTL 1U-3552 TL, 9W-8259 55 34,0 75 FC600 VTL

U

107-8609

60

39,9 88 FC700 VTL

4T-4702

70

FC800 VTL

117-6802

80

I

Impact

1 Kg

Lb

Part#

OEM

Size

Kg Lb

3,2 3,9 6,0 10,7

7 9 13 24

FC250 U FC300 U FC350 U FC450 U

1U-3252 1U-3302 1U-3352 9W-8452

25 30 35 45

5,2 7,1 14,4 21,8

11 16 32 48

OEM

4,0 9 FC250 WTL 1U-3252 WTL 135-8258 25

FC350HL2 FC400HL2

8,5 19 FC350 WTL 1U-3352 WTL 135-9337 35 16,1 35 FC450 WTL 1U-3452 WTL 138-6458 45

FC450HL2

22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 39,9 88 FC600 WTL 6I-6602 WTL 135-9608 60 54,2 119 FC700 WTL Lb

13,2 29

3

70

4T-4702 WTL

Part#

OEM

Size

FC450 PHC

9W-8459

45

PHC tenner har høylegert hvitt støpejern for ekstrem penetrasjon

2

Size

5,6 12 FC300 WTL 1U-3302 WTL 135-9308 30

Penetration Hard Core

Standard

Part#

Part#

14,0 31 FC400 WTL 7T-3402 WTL 135-9408 40

Kg

STD

2

Universell

4

4T-4702 RC

Part#

FC550HL2 FC600HL2 FC700HL2

700HB

FC800HL2

WTS

Size

Kg

Lb

Part#

30 35 45 55

4,2

9

FC300 STD

1U-3302 30

6,6

15

FC350 STD

1U-3352 35

OEM

Size

12,0

26

FC450 STD

9W-8452 45

Kg Lb

Part#

OEM

1,3 3 FC200 WTS 1U-3202 WTL 135-8208 5,3 12 FC300 WTS 1U-3302 WTL 135-9308 8,0 18 FC350 WTS 1U-3352 WTL 135-9337 12,5 28 FC450 WTS 1U-3452 WTL 138-6458

Size 20 30 35 45

Andre produsenters navn, beskrivelser, bilder og delenumre brukes kun som referanser.

URA - DRP CATERPILLAR FOR GRAVERE

Chisel

RE

6

Rock Exploder

P

Penetration

30 35 40 45 55 60 70 80

Clack!

Sharp

OEM

Size

Clack!

3Twin Tiger

FC300 I 1U-3301 FC350 I 1U-3351 FC450 I 9W-8451 / 1U-3451 FC550 I 9W-8551 / 1U-3551

OEM pins OEM retainers 107-3308 8E-6259 132-4766 3G-9609 9J-2308 149-5733 8E-6358 8E-6359 3G-9548 114-0358 114-0359 9J-2358 7T-3408 8E-8409 116-7408 116-7409 8E-0468 8E-8469 114-0468 107-3469 6Y-8558 8E-5559 107-3378 3G-9559 1U-1558 107-8559 6I-6608/ 6I-6609 113-9608 113-9609 4T-4708 4T-4707 113-4708 113-4709 134-1808 101-2874 102-0101 134-1809

WTL

Twin Tiger Long

4322º 22º 45 451,8" 1,8" FC400 19,6 19,643 FC400S SLHS LHS125-8406 125-84064040 19,6 43 22º FC400 S RHS 125-8405 19,6 19,643 4322º 22º FC400 FC400S SRHS RHS125-8405 125-8405 23,5 52 22º FC450 S 114-0464 23,5 23,552 5222º 22º FC450 FC450S S 114-0464 114-0464 24,1 53 22º 50 2" FC450 S LHS 114-0466 45 24,1 24,153 5322º 22º 50 502" 2" FC450 FC450S SLHS LHS114-0466 114-04664545 24,1 53 22º FC450 S RHS 114-0465 24,1 24,153 5322º 22º FC450 FC450S SRHS RHS114-0465 114-0465

15º

22º 55 FC550 S LHS 107-3556 44,3 979797 60 60 2,4" 2,4" 22º 22º63 107-355655 55 FC550 FC550S SLHS LHS107-3556 2,9" 44,3 44,3 63 632,9" 2,9" 22º FC550 S RHS 107-3555 44,3 979797 22º 22º 107-3555 FC550 FC550S SRHS RHS107-3555 44,3 44,3 22º FC600 S 119-8604 77,0 169 16922º 22º 119-8604 FC600 FC600S S 119-8604 77,0 77,0169 22º 70 2,8" FC600 S LHS 119-8606 60 78,2 172 119-860660 17222º 22º 70 60 FC600S SLHS LHS119-8606 702,8" 2,8"FC600 78,2 78,2172 22º FC600 S RHS 119-8605 78,2 172 119-8605 17222º 22º FC600 FC600S SRHS RHS119-8605 78,2 78,2172 22º FC700 S 133-0704 77,8 171 17122º 22º 133-0704 FC700 FC700S S 133-0704 77,8 77,8171 70 2,8" FC700 S LHS 133-0706 70 22º 80,4 177 70 702,8" 2,8"FC700 17722º 22º75 3" 133-070670 70 FC700S SLHS LHS133-0706 80,4 80,4177 75 753" 3" 22º FC700 S RHS 133-0705 78,7 173 133-0705 17322º 22º FC700 FC700S SRHS RHS133-0705 78,7 78,7173 6I-8804 80 22º 100 3,9" FC800 S 123,7 272 6I-8804 80 27222º 22º100 80 FC800S S 6I-8804 1003,9" 3,9" FC800 123,7 123,7272

1,7 4 F5559 WC 1,7 1,7 44 F5559 F5559WC WC

55 5555

F6061 WC 2,7 6 F6061WC WC 2,7 2,7 66 F6061

60 6060

F7069 WC 3,7 8 F7069WC WC 3,7 3,7 88 F7069

70 7070

4,5 10 F8071 WC 4,5 4,5 10 10 F8071 F8071WC WC

80 8080

15º 15º UNIVERSAL slagfri låsepinne.

RHS RHS RHS 100% kompatibel med Caterpillar adaptere BOLT-ON ADAPTERS BOLT-ON BOLT-ONLOADER LOADER LOADER ADAPTERS ADAPTERSmed horizontal låsepinne LHS LHS LHS

BO BO BO

BOC BOC BOC

HL2

Part#

Mindre slark Økt sikkerhet sammenlignetBOLT-ON BOLT-ON BOLT-ON CORNER med den tradisjonelle låsepinCORNER CORNER ADAPTER nen ADAPTER ADAPTER Lett å installere og fjerne Kompatibelt med OEM adaptere

BOLT-ON BOLT-ON BOLT-ON LOADER LOADER LOADER ADAPTER ADAPTER ADAPTER

OEM pins OEM retainers 107-3308 8E-6259 132-4766 3G-9609 9J-2308 149-5733 8E-6358 8E-6359 114-0358 3G-9548 9J-2358 114-0359 7T-3408 8E-8409 116-7408 116-7409 8E-0468 8E-8469 114-0468 107-3469 6Y-8558 8E-5559 107-3378 3G-9559 1U-1558 107-8559 6I-6608/ 6I-6609 113-9608 113-9609 4T-4708 4T-4707 113-4708 113-4709 134-1808 101-2874 102-0101 134-1809

FC300HL2 FC350HL2 FC400HL2

Bº BºBº FC450HL2 FC550HL2 FC600HL2 FC700HL2 FC800HL2

Kg Lb Bº Kg Kg LbLbBºBº

Part# Part# Part# FC350 13,0 29 25 40 1,6" FC350 FC350 1,6" BO 13,0 13,02929252540401,6" BO BO

Kg Lb Bº Kg KgLbLbBºBº

Part# Part# Part# VOLVO L220D FC350 VOLVO VOLVO L220D L220D 16,9 37 25 40 1,6" 35 1,4" BOC FC350 FC350 Hitachi LX290 1,6"35351,4" 1,4" 16,9 16,93737252540401,6" Hitachi LX290 LX290 BOC BOC Hitachi

1,8 1,8 1,8 2,4 2,4 2,4 4,3 4,3 4,3 5,0 5,0 5,0 7,0 7,0 7,0 9,2 9,2 9,2 13,5 13,5 13,5 26,0 26,0 26,0 31,2 31,2 31,2 44,3 44,3 44,3

4 44 5 55 9 99 11 11 11 15 15 15 20 20 20 30 30 30 57 57 57 69 69 69 97 97 97

22 2222 25 2525 30 3030 35 3535 40 4040 45 4545 55 5555 60 6060 70 7070 80 8080

WN-220 WN-220 WN-220 WN-250 WN-250 WN-250 WN-300 WN-300 WN-300 WN-350 WN-350 WN-350 WN-400 WN-400 WN-400 WN-450 WN-450 WN-450 WN-550 WN-550 WN-550 WN-600 WN-600 WN-600 WN-700 WN-700 WN-700 WN-800 WN-800 WN-800

FUTURA loader adapter FUTURA FUTURA loader loader adapter adapter size 55 with six optional size size 55 55 with with six six optional optional wear caps mounted wear wearcaps capsmounted mounted

Size 30 35 40 45 55 60 70 80

FUTURA excavator adapter FUTURA FUTURA excavator excavator adapter adapter size 55 with two optional size size 55 55 with with two two optional optional wear caps mounted wear wear caps caps mounted mounted

HAMMERLESS WC ADAPTEREFUTURA DRP HL2: UNIVERSAL PIN SOLUTION 100%ADAPTERS COMPATIBLE WITH YOUR DIRECT PARTS FOR EXCAVATOR FOR GRAVERE BESKYTTELSESDEKSEL DIRECT DIRECTREPLACEMENT REPLACEMENT REPLACEMENT PARTS PARTSSIDE FOR FORCATERPILLAR CATERPILLAR CATERPILLAR EXCAVATOR EXCAVATOR ADAPTERS ADAPTERS XXX

2

3

VOLVO L220D VOLVO VOLVO L220D L220D Hitachi LX290 Hitachi Hitachi LX290 LX290

EXCAVATOR ADAPTER ADAPTER ADAPTER

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

1

CATERPILLAR SIDE PIN ADAPTERS XXX WC WC WC HL2 UNIVERSAL SOLUTION INCREASED SAFETY EXCAVATOR EXCAVATOR EXCAVATOR ADAPTER ADAPTER ADAPTER

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

EXCAVATOR EXCAVATOR FUTURA - DRP CATERPILLAR FOR GRAVERE RC

RE

Rock Chisel

Kg Lb

Rock Exploder

Part#

2,7 6 FC200 RC 4,2 9 FC250 RC 5,9 13 FC300 RC 8,8 19 FC350 RC 11,6 26 FC400 RC 17,7 39 FC450 RC 30,5 67 FC550 RC 40,6489 4 4FC600 RC 57,27126 FC700 RC 7 7FC800 RC 84,7 186

OEM

Size

Kg Lb

1U-3302 RC 125-8309 1U-3352 RC 119-9359 7T-3402 RC 124-7409 1U-3452 RC 116-7459 1U-3552 RC 113-0559 0,8" 6I-6602 RC 119-9609 0,8" 0,8" 4T-4702 RC 1" 1"1" -

20 25 30 35 40 45 55 60 70 80

5,6 12 FC300 RE

Part#

8,3 18 FC350 RE

Clack!

P

With the design of aPenetration quick and easy replacement assembly, FUTURA engineered fastening solutions contribute to reduce machine's downtime. Hammering is also avoided and parts remain perfectly locked in place.

HAMMERLESS SOLUTION 6,5 9,7

14 21

FC350 P FC400 P

HAMMERLESS PIN

Avoiding hammering Twin Tiger the HL2 Hammerless system features Longan increased safety compared to standard side pin & washers.

Bº BºBº

100% Compatible with OEM adapters. The FUTURA HL2 system works only with FUTURA teeth is fully compatible with Direct OEM but Size Kg Lb Part# OEM Replacement Parts Caterpillar side pin adapt3 1,4 FC200 P 1U-3209 1U-3302 RC 125-8309 30 ers. Dirt plugs are included each PHL2 9J-4259 part 7 for FC250 3,2 1U-3352 RC 119-9359 35 number 4,5 9J-4309 10 FC300 P

10,9 24 FC400 RE 7T-3402 RC 124-7409 40

BLBLBL

OPTIONAL OPTIONAL OPTIONAL WEAR CAP WEAR WEAR CAP CAP

WTL

9J-4359 6Y-7409

2

1 Size

Kg Lb

20 25 30 35 40 45 55 60 70 80

1,8 4 FC200 WTL 1U-3202 WTL 135-8208 20

Part#

OEM

Size

4,0 9 FC250 WTL 1U-3252 WTL 135-8258 25 5,6 12 FC300 WTL 1U-3302 WTL 135-9308 30 8,5 19 FC350 WTL 1U-3352 WTL 135-9337 35

SOCKET HEX Part#

OEM pins

3

Size

FC200HL2 8E-6208, 1U-4208

20

FC220HL2 132-4772, 6Y-3228

22

8E-6209, 4T-0001 8E-6259, 3G-9609 149-5733 8E-6258, 132-4763, 8E-6259, 3G-9609

WTL 7T-3402 WTL Lb 135-9408 40Part# FC250HL2 Quantity FC450 RE Size 14,0 31 FC400 1U-3452 RC 116-7459 9J-2258 149-5733 Part# 15,8 35OEM Part# Size OEM Kg Lb Bº Kg45 Lb Bº Kg Size 13,1 29 9W-8459 FC450 P Part# Part#28,1 62 FC550 Part# Part# Size Size Part# OEM OEM OEM OEM Kg Kg LbLb BºBº Size Size Kg LbLb BºBº40 compatible Kg LbLb 45 Part# Quantity Quantity Size Size 132- 8E-6259M, 3G-9609 WTL 1U-3452Kg WTL 138-6458 35 FC450 16,1 FC300HL2 107-3308, The HL2 Kg System is 18,2 100% with RE 1U-3552 RC 113-0559 55 9W-8559 FC550 P 4766, 9J-2308 149-5733 76 27,3side60pin FC600 6I-6554 FC550 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 34,6 1,8 22º 20 FC200 40,5 119-3205 20 your current Caterpillar adapter.

7I-7609 P ck!

Cla 7676 6I-6554 6I-6554 119-3205 FC550 FC550 20 FC350HL2 8E-6358, 114-0358, 8E-6359, 3G-9548 FC600 RE 6I-6602 60 34,6 34,6 1,8 1,8 22º 22º 20 FC200 FC200 89119-3205 2020RC 119-9609 9J-2358 114-0359 39,9 88 FC600 WTL 6I-6602 WTL 135-9608 60 4T-4709 82 pins FC700 6I-6556 72 37,4 the FC550 LH 6Y-3224 22 Increased pin retention: areP securely 32,6 3,3 22º 25 FC220 FC400HL2 7T-3408, 116-7408 8E-8409, 116-7409 FC700 RE 4T-4702 RC 32,6 70 6I-6556 727254,8 121 FC800 P 117-6809 FC550 FC550LH LH 6I-6556 6Y-3224 25 32,6 119 FC700 WTL 4T-4702 WTL 70 54,2 3,3 3,3 22º 22º 25 FC220 FC22055,5 1226Y-3224 22 22 locked in place.72Rubber under locking WC 55 107-3469 FC450HL2 8E-0468, 114-0468 8E-8469, FC550 RH 6I-6555 55 60 2,4" 25 1" 4 F5559 6Y-3254 32,6 7272 22º insert F5559WC WC 5555 2,4" 2,4" 6I-6555 55 FC550 FC550RH RH 6I-6555 55 1,7 60 60 25 25 1,7 1,744 F5559 4,4 101010 22º 32 1"1" FC250 6Y-3254 6Y-3254 tab allows32,6 32,6 22º the locking22º tab (fig.

3) to compress, 1,3" FC550HL2 6Y-8558, 107-3378 8E-5559, 3G-9559 4,4 4,4 22º 22º 32 FC250Kg 119-3253 Lb Part# OEM 35,4 Size 78 Kg Lb Part# OEM Size VTL PHC 105-6270 FC550 LHS 1U-1558 107-8559 119-3253 1,3" FC250 119-3253 321,3" rotate and lock 105-6270 FC550 FC550LHS LHS 105-6270 35,4 35,4 7878 FC600HL2 6I-6608, 113-9608 6I-6609, 113-9609 13,2 29 FC450 PHC 9W-8459 45 4,6 101010 FC250-25 13,0 6Y-3254 1U-3452 TL, 7T-8459 45 78 29 FC450 VTL 25 FC550 Easy to 35,4 install and remove with a standard hex RHS 105-6279 6Y-3254 25 4,6 4,6 FC250-25 FC250-25 6Y-3254 Vector Tiger Penetration 25 FC700HL2 105-6279 105-6279 78 78 FC550 FC550 RHS RHS 4T-4708, 113-4708 4T-4707, 113-4709 35,4 35,4 20,5 45 FC550 VTL 1U-3552 TL, 9W-8259 1" LH 4,3 Long9 9 922º 25 drive socket a hexHard key. Core PHC tenner har 6I-6604 FC600 60,955or 134 FC800HL2 134-1808, 102-0101 101-2874, 134-1809 251"1" FC250-25 FC250-25 FC250-25LH LH 4,3 4,3 22º 22º 25 6I-6604 6I-6604hvitt 134 FC600 FC600 høylegert 60,9 107-8609 60,9 60 134 34,0 75 FC600 VTL FC250-25 RH 4,3 9 9 9 125 6I-6606 FC600 LH støpejern for 56,8 FC250-25 FC250-25RH RH88 FC700 VTL 4,3 4,3 4T-4702 56,8 70 125 125 6I-6606 39,9 FC600 FC600LH LH 6I-6606 56,8 70 2,8" ekstrem 3G-6304 FC300 7,5 161616 125 22º 6I-6605 2,8" 2,8" FC600 RH 70 70 3G-6304 FC300 FC300 3G-6304 7,5 7,5 penetrasjon FC800 VTL 117-6802 56,8 80 125 3" 12522º 6I-6605 FC600 FC600RH RH 6I-6605 30 1,2" 700HB 22º75 56,8 56,8 75 753"3" FC600 30 30 22º 32 7,2 161616 1,2" 1,2" FC300 LH LHS 62,4 137 1,3" 22º 22º 32 FC300 FC300 LH LH 7,2 7,2 137 FC600 FC600LHS LHS WC 60 62,4 62,4137 2,7 6 F6061 1,3" 60 321,3" F6061WC WC 6060 FC300 RH 7,2 161616 2,7 2,766 F6061 6060 FC600 RHS 62,4 137 FC300 FC300RH RHI 7,2 7,2U 30 137 137STD FC600 FC600 RHS RHS WTS 62,4 62,4 3030 60,3 133 FC300-35 8E-9490 7,7 171717 FC600-80 113-9604 8E-9490 8E-9490 FC300-35 FC300-35 7,7 7,7 133 133 113-9604 113-9604 FC600-80 FC600-80 60,3 60,3 Impact Standard 17 22º 35 1,4" FC300-35 LH 8E-9496 7,5 Universell 80 3,2" FC600-80 LH 113-9606 22º 56,5 124 1,4"FC300-35 8E-9496 351,4" 7,5 7,5 171722º 22º 35 FC300-35LH LH8E-9496 3,2"FC600-80 12422º 113-9606 803,2" FC600-80LH LH113-9606 22º 80 56,5 56,5124 7,5 171717 FC300-35 RH 8E-9495 FC600-80 RH 113-9605 56,5 124 8E-9495 7,5 7,5 FC300-35 FC300-35RH RH8E-9495 124 113-9605 FC600-80 FC600-80RH RH113-9605 56,5 56,5124 6I-6354 22º FC350 10,5 232323 222-7700 FC700 83,1 183 6I-6354 6I-635435 Twin Tiger 22º40 1,6" FC350 FC350 10,5 10,5 22º 183 222-7700 FC700 FC700 222-7700 83,1 83,1183 1,6"FC350-B35 3G-8354 35 401,6" 35 81,8 Sharp 35º 40 10,2 222222 180 FC700 LH 3G-8354 35º FC350-B35 FC350-B35 3G-8354 10,2 10,2 35º 180 FC700 FC700LH LH 81,8 81,8180 Kg Lb Part# OEM Size Kg Lb Part# OEM Size 6I-6404 45 1,8" OEM Size Lb Part# OEM Size Kg Lb Part# 14,4 Kg323232 22º FC400 40 3,5" 180 90 FC700 RH 35º 90 81,8 180 1,8" 1,8" 6I-6404 6I-6404 40 45 45 14,4 14,4 22º 22º FC400 FC400 40 3,5" 3,5" 180 90 FC700 FC700 RH RH 35º 35º 81,8 81,8 1,3 3 FC200 WTS 1U-3202 WTL 135-8208 20 25 5,2 11 FC300 I 1U-3301 30 FC300 STD 1U-3302 30 47 7 FC250 U 1U-3252 FC450 6I-6464 21,4 3,2 197 4,2 9 FC700 LHS 89,5 5,3 12 FC300 WTS 1U-3302 WTL 135-9308 30 479 FC300 U 1U-3302 30 6I-6464 FC350 I 3,947 35 1U-3351 21,4 21,4 FC450 FC4507,1 166I-6464 197 1976,6 15 FC350 STD FC700 FC700 WC 70 89,5 89,5 8 F7069 3,7 70 1U-3352 LHS 35LHS WC WC 7070 88 F7069 3,7 701U-3352 3,7 47 13 FC350 U 1U-3352FC450 6I-6466 8,0 18 FC350 70 WTS WTL 135-9337 35F7069 35 FC450 I 9W-8451 / 1U-3451 45 197 LH 14,4 32 21,2 6,0 FC700 RHS 89,5 474724 FC450 U 9W-8452 FC450 6I-6466 6I-6466 FC450LH LH 21,2 21,2 197 19712,0 26 FC450 STD FC700 FC700 RHS 12,5 28 FC450 WTS 1U-3452 WTL 138-6458 45 9W-8452 RHS 45 89,5 10,7 45 21,8 48 FC550 I 9W-8551 / 1U-355189,5 55 2" 22º 50 FC450 RH 6I-6465 21,2 474747 192 FC700-95 87,1 6I-6465 6I-6465 2" 2" 50 50 22º FC450 FC450RH RH 21,2 21,2 22º 192 FC700-95 FC700-95 87,1 87,1192 3,7" FC700-95 LH 22,5 505050 FC450 LHS 35º 95 82,4 181 3,7"FC700-95 18135º 22,5 22,5 FC450 FC450 LHS LHS 953,7" FC700-95LH LH 35º 95 82,4 82,4181 Andre bilder og delenumre brukes kun45 som 422,5 4545referanser.

50produsenters navn, beskrivelser, FC700-95 RH FC450 RHS 82,4 181 181 FC700-95 FC700-95RH RH 22,5 22,55050 FC450 FC450RHS RHS 82,4 82,4181 6I-8804 268 FC800 34,0 757575 FC450-63 122,0 -6I-8804 6I-8804 268 FC800 FC800 34,0 34,0 FC450-63 FC450-63 122,0 122,0268 WC 80 2,5" FC450-63 LH 4,5 10 F8071 3,9" FC800 LH 80 22º 63 31,2 696969 117,9 259 30º 100 F8071WC WC 8080 2,5"FC450-63 632,5" 4,5 4,510 10 F8071 25930º 3,9" FC800 1003,9" FC800LH LH 8080 22º 63 31,2 31,2 22º FC450-63LH LH - 117,9 117,9259 30º100 259 FC800 RH 31,2 696969 FC450-63 RH 117,9 259 FC800 FC800RH RH 31,2 31,2 FC450-63 FC450-63RH RH - 117,9 117,9259

Part# Size Part# Part# OEM OEM OEM Size Size

Kg Lb Bº Kg KgLbLbBºBº

HEX KEY OEM retainers

13 0,5" 0,5" 13 130,5" 1,7 4 4 25º FC200 BL 8J-7525 20 8J-7525 20 1,7 1,7 425º 25º25 1,0" FC200 FC200BLBL 8J-7525 20 1,0" 25 251,0"

25 30 35 40 45

15º 15º 15º

55 60

RHS RHS RHS

70 80

11

LHS LHS LHS

RHS RHS RHS

LH LH LH

RH RH RH

RH RH RH

13 13 13

WC ADAPTERE DIRECT REPLACEMENT PARTS FOR CATERPILLAR LOADER ADAPTERS FOR HJULLASTERE BESKYTTELSESDEKSEL

S REPLACEMENT PARTS FOR CATERPILLAR S DIRECT LOADER ADAPTERS LOADER ADAPTER

S

WC WC

LOADER ADAPTER

S

LOADER ADAPTER

LOADER ADAPTER

WC SVEISBAR ADAPTERNESE WELD-ON

WN WN

OPTIONAL WEAR CAP

OPTIONAL WEAR CAP

NOSE

WELD-ON NOSE

Bº

Weld-on Noses are the easiest and quickest way to convert any proprietary adapter into the Futura High Performance Hammerless Weld-on Noses are the easiestsystem. and

Bº

Kg Lb Bº

Part#

OEM

Size

Kg Lb Bº

Part#

OEM Size

20,0 44 22º FC400 S 125-8404 FC550 S 107-3554 43,5 96 22º 60 2,4" 19,6 43 22º 45 1,8" FC400 S LHS 125-8406 40 44,3 97 22º 63 2,9" FC550 S LHS 107-3556 Part# 19,6Bº43 22º FC400 S RHS 125-8405 Part# OEM OEM Size Kg Lb Size Kg Lb Bº FC550 S RHS 107-3555 44,3 97 22º 23,5 S 114-0464 43,5 96 22º 22º52 22º 20,0 44 FC400FC450 S 125-8404 FC550 S 107-3554 169 22º FC600 S 119-8604 77,0 24,1 22º1,8" 50 2" LHS 114-0466 22º5345 19,6 43 FC400FC450 S LHSS125-8406 40 4544,3 97 22º 60 2,4" FC550 S LHS 107-3556 55 22º2,9" 70 2,8" FC600 S LHS 119-8606 78,2 17263 24,1 RHS 114-0465 19,6 43 22º53 22º FC400FC450 S RHSS125-8405 FC550 S RHS 107-3555 44,3 97 22º172 22º FC600 S RHS 119-8605 78,2 23,5 52 22º FC450 S 114-0464 FC600 S 119-8604 77,0 169 22º171 22º FC700 S 133-0704 24,1 53 22º 50 2" FC450 S LHS 114-0466 45 77,8 60 S LHS 119-8606 2,8" 78,2 172 22º17770 70 FC600 2,8" FC700 24,1 53 22º FC450 S RHS 114-0465 22º S LHS 133-0706 80,4 15º 75 3" FC600 S RHS 119-8605 LHS 78,2 172 22º173 22º FC700 S RHS 133-0705 78,7 FC700 S 133-0704 77,8 171 22º 22º 100 3,9" FC800 S 6I-8804 123,7 27270 2,8" 80,4 177 22º 75 3" FC700 S LHS 133-0706 70 15º LHS FC700 S RHS 133-0705 78,7 173 22º

RHS

RHS BOLT-ON LOADER ADAPTERS

BO BOLT-ON LOADER ADAPTERS BOLT-ON

123,7 272 22º 100 3,9"

BOC

BOLT-ON

FC800 S

6I-8804

80

55

Kg Lb

1,7 Kg Lb

4

Part#

Quantity Size

F5559 WC Part# Quantity Size

55

Size quickest Kg way toLbconvertPart# any proprietary adapter into Futura High20 2 theWN-200 1,0 Performance Hammerless system. 22 1,8 2,4Lb 4,32

4 WN-220 5 Part# WN-250 Size 9 WN-200 WN-300 20

5,04 7,05

11WN-220 WN-350 22 15WN-250 WN-400 25

35

4,3

9,29 11 5,0 13,5

20WN-300 WN-450 30 30WN-350 WN-550 35

45

15 7,0 26,0 20 9,2 31,2

57WN-400 WN-600 40 69WN-450 WN-700 45

60

30 13,5 44,3 57 26,0

97WN-550 WN-800 55 60 WN-600

80

Kg 1,0

60 1,7

F5559 WC 4 F6061 WC 2,7 6

55

70 2,7

6 F6061 WC F7069 WC 3,7 8

60

80

4,5 10 F8071 WC 8 F7069 WC

70

F8071 WC

80

3,7

60

70 80

1,8 2,4

31,2 4,5 10

44,3

69

WN-700

25 30 40 55 70

70

80 FUTURA loader adapter 97

WN-800

Steel solutions for tough conditions size 55 with six optional

wear caps mounted FUTURA loader adapter

7

WTL 135-825830 25 TL 135-9308 WTL 135-930835 30 TL 135-9337

WTL 135-933740 35 L 135-9408 WTL 135-940845 40 TL 138-6458 45 WTL 138-645855 TL 138-6558

WTL 138-655860 55 L 135-9608 WTL 135-9608 70 60 2 WTL 702 WTL 70

M M 01 3301

Kg Lb Part# Part#TL Kg Lb 1,2 3 FC200 2,6 1,2 63 FC250 FC200 TL 2,6 86 FC300 FC250 TL 3,7 3,7 14 8 FC350 FC300 TL 6,3 6,3 24 14 FC400 FC350 TL 11,0 11,0 28 24 FC450 FC400 TL 12,9 12,9 39 28 FC550 FC450 TL 17,5 17,5 67 39 FC600 FC550 TL TL 30,3 30,3 L 67 FC700 FC600 TL TL 44,0 97 44,0 151 97 FC800 FC700 TL TL 68,5 68,5 151 FC800 TL LONG LONG LONG LONG LONG

OEM Size 20 1U-3202OEM TL, 9W-8209Size 25 1U-3252 9W-8259 20 1U-3202 TL, 9W-8209 1U-3252 1U-3302 TL, 9W-8259 9W-8309 25 30 1U-3302 TL, 9W-8309 1U-3352 9W-2359 30 35 1U-3352 TL, 7T-3402 TL, 9W-2359 6Y-5409 35 40 7T-3402 TL, 45 1U-3452 TL,6Y-5409 7T-8459 40 1U-3452 TL, 9W-6559 7T-8459 45 1U-3552 55 1U-3552 TL, 107-8609 9W-6559 55 6I-6602 TL, 60 6I-6602 TL, 107-8609 60 4T-4702 TL 70 4T-4702 70 TSJ800VTL 80 TSJ800V 80

TANNPROFILER FOR GRAVERE

LL LLLL LL LVTL LLVTL L L

LONG LONG LONG LONG LONG

LONG VECTOR VECTOR TIGER LONG LONG LONG TIGER LONG LONG LONG

Size Size 30 30

51 35 3351 35 1U-3451 / 1U-3451 45 45

1U-3551 / 1U-3551 55 55

Part# OEM Size Part# Part# OEM Kg KgKg Kg Lb LbLb Lb Part# OEM OEM SizeSize Size Part# OEM Part# Kg OEM Size Kg LbLbPart# OEM Size Kg 1,6 Lb 4 Size 20 FC200 1U-3202 FC200 FC200 L LL1U-3202 L 1U-3202 2020 Part# 1,6 1,6 1,64 Lb 1U-3202 4Lb 4 FC200 Kg OEM 20Size Size Part# Kg OEM FC220 2222 FC200 20 2,1 6Y-3222 1,6 1U-3202 FC200 LL 6Y-3222 20 FC200 20 22 1,6 1U-3202 44FC220 1,62,1 FC220 FC220 LL LLL6Y-3222 L1U-3202 22 2,1 2,1 6Y-3222 54 5 5 5 FC200 20 1,6 1U-3202 4 FC200 L LL6Y-3222 1,6 4Lb Part# 2522 FC250 FC220 L 1U-3202 22 Kg OEM Size 3,4 1U-3252 755FC250 2,1 6Y-3222 FC220 FC220 2220 2,1 6Y-3222 2,13,4 25 25 25 FC250 FC250 LL LL1U-3252 L 1U-3252 3,4 3,4 1U-3252 75Lb7 57 FC220 22 2,1 6Y-3222 Kg Part# OEM Size FC220 L LLLL 6Y-3222 2,1 510 30 FC300 Kg Part# OEM Size 25 FC250 4,5 1U-3302 3,4 1U-3252 25 FC250 2522 FC250 FC200 20 3,4 1U-3252 3,44,5 7Lb10 1,6 1U-3202 477FC300 30 30 30 FC300 FC300 LL 1U-3452 LL1U-3302 L1U-3252 4,5 4,5 1U-3302 1U-3302 10 10 25 FC250 3,4 1U-3252 7 Part# Part# Part# KgKg Kg Lb Lb Lb OEM OEM OEM Size Size Size 13,0 FC450 VTL TL, 7T-8459 45 29 FC250 L LLLL 1U-3252 3,4 716 35 FC350 30 FC300 7,1 1U-3352 4,5 1U-3302 10 13,0 VTL 1U-3452 TL, 7T-8459 30 FC300 FC220 2245 3025 FC300 2,1 6Y-3222 4,5 5FC450 1U-3302 10 4,57,1 102916 35 35 35 FC350 FC350 FC350 LL 1U-3552 L L1U-3302 30 FC300 7,1 7,1 1U-3352 1U-3352 16 16 4,5 1U-3302 20,5 FC550 VTL TL, 9W-8259 55 45 FC200 FC200 FC200 L 1U-3552 L1U-3202 2030 20 20 FC300 LLLLL1U-3352 1,61,6 1,6 1U-3202 1U-3202 44510 410 416 4,5 1U-3302 20,5 FC550 VTL TL, 9W-8259 55 40 FC400 35 FC350 L 8,6 7T-3402 19 7,1 1U-3352 25 FC250 35 FC350 L 3,4 1U-3252 7 35 FC350 L Part# 7,1 1U-3352 16 7,18,6 16 Kg LbFC400 OEM40 40 Size 40 FC400 FC400 L LL7T-3402 L1U-3352 3560 FC350 34,0 107-8609 60 75 FC600 VTL 8,6 8,6 7T-3402 7T-3402 19 1916 19 7,1 1U-3352 34,0 107-8609 FC600 VTL FC350 FC220 FC220 FC220 L LLLLLL6Y-3222 2235 22 22 7,1 1U-3352 2,12,1 2,1 6Y-3222 6Y-3222 57516 510 519 45 FC450 40 FC400 13,3 9W-8452 29 8,6 7T-3402 30 FC300 4,5 1U-3302 40 FC400 L 40 FC400 L 8,6 7T-3402 19 8,613,3 19 39,9 4T-4702 70 88 FC700 VTL FC200 LL7T-3402 20 1,6 1U-3202 4 FC450 40 FC400 45 40 45 45 FC450 FC450 L LLL9W-8452 8,6 7T-3402 13,3 13,3 9W-8452 9W-8452 29 2919 29 4T-4702 70 FC700 VTL 39,9 FC400 2525 25 FC250 FC250 FC250 L LLLL1U-3252 8,6 3,43,4 3,4 1U-3252 1U-3252 78819 747 729 55 FC550 45 FC450 L 7T-3402 21,3 9W-8552 13,3 9W-8452 35 FC350 7,1 1U-3352 16 45 FC450 69,5 80 153 FC800 VTL 45 55 FC450 13,3 9W-8452 29 13,3 29 FC220 L9W-8452 22 2,1 6Y-3222 5 FC550 45 FC450 69,5 153 FC800 VTL 80 55 55 FC550 FC550 LL LLL9W-8552 LL 9W-8452 13,3 9W-8452 29 21,3 21,3 21,3 9W-8552 9W-8552 47 47 47 FC450 29 3045 30 30 FC300 FC300 FC300 L LLLL1U-3302 4,513,3 4,5 4,5 1U-3302 1U-3302 1010 10 60 FC600 55 FC550 L 31,0 6I-6602 68 21,3 9W-8552 47 40 FC400 8,6 7T-3402 19 55 FC550 55 60 FC550 21,3 9W-8552 47 21,3 47 6847 25 FC250 3,4 1U-3252 7 FC600 55 FC550 21,3 9W-8552 60 60 FC600 FC600 LL LLLL9W-8552 LL 9W-8552 31,0 31,0 31,0 6I-6602 6I-6602 68 68 FC550 47 3555 35 35 FC350 FC350 FC350 L LLL6I-6602 60 FC600 L 7,121,3 7,1 7,1 1U-3352 1U-3352 1U-3352 1616 16 31,0 6I-6602 68 45 FC450 13,3 9W-8452 29 60 FC600 60 60 L LLL6I-6602 31,0 6I-6602 68FC600 31,0 31,0 68 68 30 FC300 4,5 1U-3302 10 FC600 6I-6602 FC600 6I-6602 68 4060 4040 FC400 FC400 L LL L7T-3402 8,631,0 8,6 8,61919 7T-3402 7T-3402 19 FC400 FC550 21,3 47 35 FC350 LL 9W-8552 7,1 1U-3352 55 16 4545 45 FC450 FC450 L LLL9W-8452 13,3 13,3 13,3292968 9W-8452 9W-8452 29 FC450 60 FC600 31,0 6I-6602 FC400 L 8,6P 19 7T-3402 40 555555 FC550 FC550 L L L 9W-8552 21,3 21,3 21,3 9W-8552 474747 FC550 PENEFC450 L9W-8552 13,3 29 9W-8452 45 PENEPENEPENE60 FC600 FC600 L L LL 6I-6602 31,0 31,0 31,0 6I-6602 6I-66026060 TRATION 686847 68 FC600 PENEPENE55 FC550 21,3 9W-8552 PENEPENEPENETRATION TRATION TRATION PENETRATION ROCK ROCK FC600 L 31,0 6I-6602 60 68 TRATION TRATION TRATION TRATION

SYL SYL SYL SYL SYL SYLSYL SYL WTS WTS SYL SYL SYL SYL

SYMMETRIC SYMMETRIC SYMMETRIC SYMMETRIC SYMMETRIC

SYMMETRIC TIGER TIGER SHARP SYMMETRIC SYMMETRIC SYMMETRIC SHARP SYMMETRIC

Part# Kg LbLb OEM Part# Part# Part# Kg Kg LbKg Lb OEM OEM OEM SizeSize Size Size Part# Part# Part# OEM Size Kg 2,0 LbKg4 Lb OEMOEM Size20Size FC200 1U-3202 Part# 4 2,0 4 4FC200 Kg Lb OEM Size 2020 FC200 SYLSYL SYL SYL 1U-3202 2,0Kg 2,0 1U-3202 1U-3202 SYLSYL SYLSYL 20 Part# LbFC200 OEM Size FC200 SYL 1U-3202 FC200 SYL 1U-3202 42,0FC200 20252020 SYLSYL 9 4FC250 1U-3202 SYL 25 2,0 4,1 SYLSYLSYL 1U-3252 9 4,1 9 25 25 FC250 FC250 FC250 SYL SYL SYL 4 9FC200 20 SYL 4,12,0 4,1 1U-3252 1U-3252 1U-3252 SYL SYL SYL 2,0 1U-3202 SYL 4LbFC200 SYLSYL 1U-3202 SYL SYL 20 Part# Kg OEM Size 9FC300 FC250 1U-3252 FC250 SYL1U-3302 13 302525 SYL 94,1 25Size FC250 SYLSYL 1U-3252 SYL 30 5,8 SYL, 183-5300 4,1 Kg 1U-3252 SYL Lb Part# OEM 9 13 25 FC250 13 13 FC300 FC300 FC300 SYL SYL SYL 3030 4,15,8 1U-3252 SYL 5,84,1 5,8 1U-3302 1U-3302 1U-3302 SYL, SYL, 183-5300 SYL, 183-5300 183-5300 Kg Lb Part# OEM Size 9 25 FC250 SYL 1U-3252 SYL 4 20 FC200 SYL 2,0 1U-3202 SYL 13 3030 FC300 SYL 5,8 1U-3302 SYL, 183-5300 18 35 FC350 SYL 13 FC300 SYL 13 FC300 SYL 30 8,0 1U-3352 SYL, 168-1359 5,8 1U-3302 SYL, 183-5300 5,8 1U-3302 SYL, 183-5300 Part# Part# Part# Kg1,3 Kg Lb Kg Lb Lb OEM OEM OEM Size Size 13 FC300 SYL FC200 WTS 1U-3202 WTL 135-8208 20 3FC200 18 18 18 5,8 1U-3302 SYL, 183-5300 FC350 FC350 SYL SYL SYL 35 35Size 35 8,0 8,0 8,0 1U-3352 1U-3352 1U-3352 SYL, SYL, 168-1359 SYL, 168-1359 168-1359 13 3030 SYL 1,3 WTS 1U-3202 WTL 135-8208 20 3FC350 5,8 1U-3302 SYL, 183-5300 9 FC300 253535 FC250 SYL 4,1 1U-3252 SYL 18 FC350 SYL 1U-3352 SYL, 168-1359 34 FC400 SYL 40 18 15,4 8E-4402 SYL, 168-1409 FC350 SYL 1848,0 FC350 SYL 35 8,0 1U-3352 SYL, 168-1359 8,0 1U-3352 SYL, 168-1359 4FC200 4FC350 20 2040 20 FC200 FC200 SYL 18 35 SYL 2,0 2,0 2,0 1U-3202 1U-3202 1U-3202 SYL SYL SYL 5,3 FC300 WTS 1U-3302 WTL 135-9308 30 12 8,0 1U-3352 SYL, 168-1359 34 34 34 FC400 FC400 FC400 SYL SYL SYL 40 40 15,4 15,4 15,4 8E-4402 8E-4402 8E-4402 SYL, SYL, 168-1409 SYL, 168-1409 168-1409 Part# 5,3 FC300 WTS 1U-3302 WTL 135-9308 30 1213 18 3530 FC350 SYL Kg Lb OEM Size 8,0 1U-3352 SYL, 168-1359 FC300 SYL 5,8 1U-3302 SYL, 183-5300 34 FC400 SYL 40 15,4 8E-4402 SYL, 168-1409 37 FC450 SYL 45 17,0 9W-8452 SYL, 159-0459 34 FC400 SYL 40 34 FC400 SYL 40 15,4 8E-4402 SYL, 168-1409 15,4 8E-4402 SYL, 168-1409 94,1 9FC250 9FC400 34 25 2545 25 FC250 FC250 SYL 18 FC350 WTS 1U-3352 WTL 135-9337 35 8,0 SYL 15,4 4,1 4,1 1U-3252 1U-3252 1U-3252 SYL SYL SYL 45 8E-4402 SYL, 168-1409 3717,0 37 37 FC450 FC450 FC450 SYL SYL SYL 45 17,0 17,0 9W-8452 9W-8452 9W-8452 SYL, SYL, 159-0459 SYL, 159-0459 159-0459 18 WTS 1U-3352 WTL 135-9337 35 8,0 34 FC400 SYL 4040 15,4 8E-4402 SYL, 168-1409 4FC350 20 FC200 SYL 2,0 1U-3202 SYL 18 35 FC350 SYL 8,0 1U-3352 SYL, 168-1359 37 FC450 SYL 45 17,0 9W-8452 SYL, 159-0459 58 55 45 FC550 SYL 26,5 9W-8552 SYL, 159-0559 37 FC450 SYL 37 FC450 SYL 45 17,0 9W-8452 SYL, 159-0459 17,0 9W-8452 SYL, 159-0459 1U-3452 WTL 138-6458 28 FC450 WTS 12,5 37 FC450 SYL 45 13 13 FC300 FC300 FC300 SYL SYL SYL 30 3055 30 17,0 9W-8452 SYL, 159-0459 5,8 5,8 5,8 1U-3302 1U-3302 1U-3302 SYL, SYL, 183-5300 SYL, 183-5300 183-5300 5813 58 58 55 55 FC550 FC550 FC550 SYL 1U-3452 WTL 138-6458 28 FC450 WTS 45 26,5 26,5 26,5 9W-8552 9W-8552 9W-8552 SYL, SYL, 159-0559 159-0559 159-0559 12,5 37 FC450 SYL 45 17,0 9W-8452 SYL, 159-0459 9 25 FC250 SYL 4,1 1U-3252 SYL 34 FC400 SYL 40 15,4 8E-4402 SYL,SYL, 168-1409 58 FC550 SYL 26,5 9W-8552 159-0559 89 605555 FC600 SYL 40,6 159-0607 58 FC550 SYL 58 55 FC550 SYL 26,5 9W-8552 SYL, 159-0559 26,5 9W-8552 SYL, 159-0559 58 55 FC550 SYL 26,5 9W-8552 SYL, 159-0559 18 18 18 FC350 FC350 FC350 SYL 35 3560 35 8,0 8,0 8,0 1U-3352 1U-3352 1U-3352 SYL, SYL, 168-1359 SYL, 168-1359 168-1359 89 89 89 60 60 FC600 FC600 FC600 SYL SYL SYL 159-0607 159-0607 159-0607 40,6 40,6 40,6 58 55 SYL 26,5 9W-8552 SYL, 159-0559 13FC550 30 FC300 SYL 5,8 1U-3302 183-5300 37 SYL 45 17,0 9W-8452 SYL, 159-0459 89FC450 60 FC600 SYL 40,6 159-0607 89 FC600 SYL 89 60 FC600 SYL 159-0607 40,6 159-0607 40,6 89 60 FC600 SYL 40,6 159-0607 34 34 34 FC400 FC400 FC400 SYL SYL SYL 40 4060 40 15,4 15,4 15,4 8E-4402 8E-4402 8E-4402 SYL, SYL, 168-1409 SYL, 168-1409 168-1409 SYL 40,6 159-0607 18FC600 35 FC350 SYL 9W-8552 8,08958 1U-3352 168-1359 6055 FC550 SYL 26,5 SYL, 159-0559 37 37 37 FC450 FC450 FC450 SYL SYL SYL 4540 4545 17,0 17,0 17,0 9W-8452 9W-8452 9W-8452 SYL, SYL, 159-0459 SYL, 159-0459 159-0459 34 FC400 SYL 15,4 8E-4402 SYL, 168-1409 89 60 FC600 SYL 40,6 159-0607 PHC 700HB 58 58 58 5545 5555 FC550 FC550 FC550 SYL SYL SYL 26,5 26,5 26,5 9W-8552 9W-8552 9W-8552 SYL, SYL, 159-0559 SYL, 159-0559 159-0559 37 FC450 SYL 17,0 9W-8452 SYL, 159-0459 TWIN TIGER

WHITEIRON IRONCORE CORE WHITE

EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR RC RC RCRC GN GN GN GN DESI DESI DESI DESI EXCAVATOR NEW NEW NEW RC RC GN GN DESI DESI NEW NEW RC GN DESI NEW EXCAVATOR EXCAVATOR EXCAVATOR GN RC GN GN GN GN DESI DESI DESI DESI DESI ONE NEW ONE ONE INTO INTO INTO RE RE RE RC GN RC+ RC+ RC+ DESI NEW GN GN DESI DESI ONE ONE GN INTO INTO DESI RE RE ONEDESI RC+ RC+ INTO REINTO RC+ DESI ONE RC GNGNGN DESI RC+ NEWONE EXCAVATOR REREINTO RC+

F FFLARE FFFFFFFF F FFF F

FLARE FLARE FLARE FLARE FLARE FLARE FLARE FLARE FLARE FLARE

FLARE FLARE FLARE FLARE

LbLbLb Part# OEM SizeSize KgKg KgLb Kg Part# Part# Part# OEM OEM OEM Size Size KgKg Part# OEM SizeSize Part# 109-9200 OEM Size Kg Lb3 LbLb Part# OEM FC200 20 1,5 FC200 FC200 F F F F 109-9200 20 2020 Kg Part# OEM Size 1,5 1,51,5 109-9200 109-9200Size 3Lb3FC200 3 Kg Lb Part# OEM FC200 F F 3G-8250 109-9200 3FC200 FC200 FC250 2520 20 20 1,5 109-9200 25 3 3,91,5 1,5 FC250 FC250 FFFF F F 109-9200 FC200 3,9 3,93,9 3G-8250 3G-8250 3G-8250 2020 2525 93 9 9 1,5 109-9200 3 9FC250 F F F 109-9200 1,5 3Lb Kg3,9 Part# OEM FC250 3G-8250 9FC200 FC250 FC250 FFF 4T-1300 25 3,9 3G-8250 Size 9 3,9 3G-8250 915 FC300 3025 25 107-3300 6,8 FC250 3,9 3G-8250 9 FC300 FC300 FC300 F F F 30 3030 15 15 F 4T-1300 4T-1300 4T-1300 107-3300 107-3300 107-3300 6,8 6,8 6,8 FC250 2525 3,9 3G-8250 9 315 FC200 F F F4T-1300 2030 30 1,56,8 109-9200 FC300 15 107-3300 FC300 FC300 F 30 15 4T-1300 107-3300 6,8 15 4T-1300 107-3300 6,8 Kg Kg Kg Lb Lb Lb Part# Part# Part# OEM OEM OEM Size Size FC350 F 35 20 FC300 4T-1300 8J-3350 107-3350 9,3 15 30Size 107-3300 6,8 FC350 FC350 FC350 F F F 35 FC300 30 20 20 20 8J-3350 8J-3350 8J-3350 107-3350 107-3350 107-3350 9,3 9,3 9,3 15 4T-1300 107-3300 6,8 25 3535 3,9 9 FC250 F 3G-8250 FC350 FF F8J-3350 107-3350 9,3 FC200 FC200 FF 8J-3350 2035 2035 20 FC350 1,5 1,5 1,5 109-9200 109-9200 109-9200 3 20 3FC350 3 FC200 F 35 20 8J-3350 107-3350 9,3 20 107-3350 9,3 FC400 40 28 7T-3400, 107-3400 12,8 FC350 35 20 8J-3350 107-3350 9,3 Kg Lb Part# OEM Size FC300 30 4040 FC400 FC400 FC400 F F7T-3400, F4T-1300 F7T-3400, 40 FC350 35 15 107-3300 6,8 28 28 28 7T-3400, 107-3400 107-3400 107-3400 20 8J-3350 107-3350 9,3 12,8 12,8 12,8 FC250 FC250 2540 2525 3,912,8 3,93,9 3G-8250 3G-8250 3G-8250 9 28 9 28 9 FC250 FC400 F FF7T-3400, 107-3400 FC400 FFFF7T-3400, 40 7T-3400, 107-3400 28 107-3400 12,8 FC200 20 40 FC450 45 1,512,8 109-9200 3 FC400 8J-1450, 107-3450 41 18,5 FC400 40 28 7T-3400, 107-3400 12,8 FC350 35 4545 FC400 40 20 FC450 107-3350 9,3 FC450 FC450 F FF7T-3400, F8J-3350 FF8J-1450, 45 28 107-3400 12,8 8J-1450, 8J-1450, 107-3450 107-3450 107-3450 41 41 18,5 18,5 18,5 FC300 FC300 FC300 3045 3030 15941 15 15 4T-1300 4T-1300 107-3300 107-3300 107-3300 6,8 6,8 6,8 FC450 FF4T-1300 107-3450 4141 18,5 FC250 25 3,9 3G-8250 FC450 F8J-1450, 45 FFF8J-1450, 45 8J-1450, 107-3450 18,5 107-3450 41 18,5 FC550 55 7J-9550 107-3550 63 FC450 28,8 FC450 45 8J-1450, 107-3450 41 18,5 FC400 40 5555 FC450 45 2863 107-3400 12,8 107-3450 41 18,5 FC550 FC550 FC550 F FF8J-1450, FF7T-3400, FF7J-9550 55 7J-9550 7J-9550 107-3550 107-3550 107-3550 63 63 28,8 28,8 28,8 FC350 FC350 FC350 35 3535 20 20 20 8J-3350 8J-3350 8J-3350 107-3350 107-3350 107-3350 9,3 9,3 9,3 FC300 F 30 1563 107-3300 6,8 FC550 F4T-1300 55 7J-9550 107-3550 28,8 FC550 F 55 FC550 F 55 7J-9550 107-3550 63 28,8 7J-9550 107-3550 63 28,8 FC550F FF 7J-9550 107-3550 5555 63 FC550 28,8 63 FC450 8J-1450,107-3550 107-3450 45 41 18,5 7J-9550 28,8 FC400 FC400 FC400 FF F7T-3400, F7T-3400, 404040 FC350 35 28 2828 7T-3400, 107-3400 107-3400 107-3400 12,8 12,8 12,8 20 8J-3350 107-3350 9,3 28,8 63 FC550 F 7J-9550 107-3550 55 F18,5 FC450 FC450 FC450 FF F8J-1450, F8J-1450, 454545 FC400 40 8J-1450, 107-3450 107-3450 107-3450 41 4141 18,5 18,5 28 7T-3400, 107-3400 12,8

WTL WTL WTL WTL WTL700HB WTL WTL WTL PHC 700HB PHC WHITE IRON WTL WEARRESISTANT WTL WTL WTL INSERT WTL

TLTLTL TL TL TLTL TIGER TL LONG TLTLTL TL

Part# Kg Lb OEM Size Part# Part# Part# Part# Kg Kg1,4 Kg Lb OEM OEM SizeSize Size Kg LbLb OEM Size 20 FC200 P OEM 1U-3209 3 Lb Part# Part# Kg Lb OEM Size Kg Lb OEM Size Part# Part# Part# Kg OEM Size OEM Size Kg Kg Lb LbLb Part# OEM Size Kg OEM 25 20 20Size 20 20 3,2 FC250 9J-4259 1,4 FC200 1U-3209 3 FC200 1,4 1,4 1,4 FC200 FC200 P PP1U-3209 PP 1U-3209 1U-3209 3 3 73 20 1,4 FC200 P 1U-3209 3 20 2020 1,4 FC200 PP 1U-3209 1U-3209 3FC200 FC400 RPHD 40 1,419,3 19,3 42 135-9400 1,4 FC200 PPP1U-3209 3025 25 4,5 FC300 9J-4309 25 25 Part# 3,2 FC250 9J-4259 7FC400 3,2 3,2 3,2 FC250 FC250 FC250 PP RPHD 9J-4259 P 9J-4259 9J-4259 73 42 7310 7 Kg Lb OEM Size 40 135-9400 25 3,2 FC250 P 9J-4259 7 25 2525 3,2 FC250 P9J-4259 9J-4259 7FC250 3,24,5 7 10 3,2 FC250 714 35 30 6,5 FC350 9J-4359 4,5 10 FC300 FC300 P 9J-4259 9J-4309 30 30 4,5 4,5 10 10 FC300 PP PPP P 9J-4309 9J-4309 2030 1,4 FC200 P9J-4309 1U-3209 3FC300 FC450 RPHD 45 30 27,9 61 138-6451 4,5 10 FC300 P 9J-4309 45 30 3030 138-6451 4,5 10 FC300 PP 9J-4309 9J-4309 4,5 10 FC300 PPP9J-4359 4,527,9 10 FC300 40 35 9,7 21 FC400 6Y-7409 6,561 14FC450 FC350 9J-4359 35 35 35 6,5 6,5 14 14 FC350 FC350 FC350 PP RPHD 9J-4359 9J-4359 25 FC250 PP9J-4309 9J-4259 7 Part# Part# Part# Kg6,5 Kg3,2 Kg Lb14 Lb14 Lb OEM OEM OEM Size Size Size 35 6,5 FC350 9J-4359 35 3535 6,5 14 FC350 PPP 6,5 14 FC350 P9J-4359 9J-4359 45 6,59,7 14 FC350 40 13,1 29 FC450 P 9W-8459 9,721 21FC550 FC400 P 9J-4359 6Y-7409 40 40 RPHD 55 9,7 9,7 21 21 FC400 FC400 FC400 PP RPHD P 6Y-7409 6Y-7409 33,4 73 138-6552 30 4,5 10 FC300 P6Y-7409 9J-4309 Part# Kg Lb OEM 40 Size 40 FC550 55 9,7 21 FC400 P 6Y-7409 33,4 73 138-6552 20 20 20 1,4 1,4 1,4 FC200 FC200 FC200 P P P 1U-3209 1U-3209 1U-3209 3 3 3 40 9,7 21 FC400 6Y-7409 4040 5545 9,7 21 FC400 PP 9W-8459 6Y-7409 9,713,1 21 29 FC400 6Y-7409 45 18,2 40 FC550 9W-8559 13,1 29 FC450 FC450 9W-8459 45 45 13,1 13,1 29 29 FC450 FC450 PP PPP P 9W-8459 35 6,5 14 FC350 P9W-8459 9J-4359 45 13,1 FC450 9W-8459 20 1,47 133 FC200 PP 1U-3209 37FC250 2545 25 25 3,213,1 3,2 3,2 FC250 FC250 PP PP9J-4259 9J-4259 9J-4259 729 FC600 RPHD 60 60,5 135-9600 29 FC450 PP 9W-8459 45 6055 45 13,1 29 FC450 9W-8459 55 27,3 60 FC600 P 7I-7609 13,1 29133 FC450 PP RPHD 9W-8459 18,2 40FC600 FC550 9W-8559 55 55 40 60 18,2 18,2 18,2 40 40 40 FC550 FC550 FC550 P P 9W-8559 9W-8559 9W-8559 9,7 21 FC400 P 6Y-7409 60,5 135-9600 55 18,2 40 FC550 9W-8559 25 3,21010 FC250 PP9J-4309 9J-4259 7 FC300 3055 30 30 4,518,2 4,5 4,5 10 FC300 FC300 P PPP 9J-4309 9J-4309 40 FC550 7060 55 55 60 37,4 82 FC700 4T-4709 18,2 40 FC550 P 9W-8559 27,3 60 FC600 FC600 P 9W-8559 7I-7609 18,2 40 60 FC550 9W-8559 60 60 45 27,3 27,3 27,3 60 60 FC600 FC600 PP RPHD PP P 7I-7609 7I-7609 7I-7609 13,1 29 FC450 P 9W-8459 70 FC700 60 75,4 166 135-9700 27,3 60 FC600 P 7I-7609 30 4,5 10 FC300 P 9J-4309 35 35 35 6,5 6,5 6,5 14 14 14 FC350 FC350 FC350 P P P 9J-4359 9J-4359 9J-4359 60 27,3 60 FC600 P PP7I-7609 7I-7609 70 80 75,4 135-9700 70 60 54,8 121 FC800 117-6809 60 70 37,4 82FC700 FC700 4T-4709 27,3 60 FC600 7I-7609 27,3 60166 FC600 55 70 70 18,2 40 FC550 9W-8559 37,4 37,4 37,4 82 82 82 FC700 FC700 FC700 PP RPHD PP4T-4709 PP 4T-4709 4T-4709 70 37,4 82 FC700 4T-4709 35 6,5 14 FC350 9J-4359 4070 40 40 9,7 9,7 9,7 21265 21 21 FC400 FC400 FC400 P RPHD P 6Y-7409 6Y-7409 6Y-7409 37,4 82 FC700 PPPPP 4T-4709 80 70 54,8 121 FC800 P 117-6809 117-6809 70 37,4 82 FC700 4T-4709 80 FC800 37,4 82 FC700 4T-4709 135-9800 120,5 60 27,3 60 FC600 P 7I-7609 80 80 80 54,8 54,8 54,8 121 121 121 FC800 FC800 FC800 PP RPHD P117-6809 117-6809 80 54,8 121 FC800 PPP 117-6809 40 80 FC800 9,7 21 FC400 6Y-7409 135-9800 120,5 265 45 45 45 80 13,1 13,1 13,1 29 29 29 FC450 FC450 FC450 P P P 9W-8459 9W-8459 9W-8459 54,8 121 FC800 P 117-6809 80 7080 54,8 FC800 P 4T-4709 117-6809 54,8 37,4 121 121 FC800 P P117-6809 82 FC700 45 13,1 29 FC450 9W-8459 55 18,2 18,2 18,2 4040 40FC550 FC550 FC550 P PPPP9W-8559 9W-8559 9W-85595555 80 54,8 121 FC800 117-6809 55 18,2 FC550 9W-8559 60 27,3 27,3 27,3 606040 60FC600 FC600 FC600 P P PP7I-7609 7I-7609 7I-76096060 UNIVERSAL 60 27,3 FC600 7I-7609 37,4 37,4 37,4 828260 82FC700 FC700 FC700 P P PP4T-4709 4T-4709 4T-4709707070 UNIVERSAL U 70 37,4 82 FC700 P 4T-4709 8080 UNIVERSAL UNIVERSAL UNIVERSAL UNIVERSAL 54,8 54,8 54,8 121 121 121 FC800 FC800 FC800 P P P117-6809 117-6809 117-6809 80 UNIVERSAL UNIVERSAL 54,8 121 FC800 P 117-6809 80 UNIVERSAL

Part# Kg Lb OEM Size Part# Part# Part# Part# Kg Kg LbKgLb OEM OEM OEM Size20 Size Size OEM Size 4LbLb 1,8 FC200 WTL 1U-3202 WTL 135-8208 Part# Part# Lb OEM SizeSize Kg OEM Size Part# Part# Part# Kg Lb Part# OEM Size Size KgKgKg Lb OEM Lb Lb OEMOEM FC200 WTL 1U-3202 WTL 135-8208 20 41,8FC200 49 4FC250 1,8 1,8 FC200 FC200 WTL WTL 1U-3202 WTL 1U-3202 1U-3202 WTLWTL WTL 135-8208 WTL 135-8208 135-8208 2025 20 20 4,0 1U-3252 135-8258 WTL FC450 PHC 45 13,2 9W-8459 29 4 1,8 FC200 WTL 1U-3202 WTL 135-8208 20 FC450 PHC 45 13,2 9W-8459 29 1,8 FC200 WTL 1U-3202 WTL 135-8208 20 1,81,8 FC200 WTL 1U-3202 WTL 135-8208 20 4FC250 WTL 1U-3202 WTL 135-8208 20 Part# Kg Lb OEM Size 94FC300 1U-3252 WTL 135-8258 25 FC250 WTL 944,0 9 FC200 4,0 4,0 1U-3252 1U-3252 1U-3252 WTL WTL 135-8258 WTL 135-8258 135-8258 25 25 25 FC250 FC250 WTL WTL WTL 5,6 12 WTL 1U-3302 WTL 135-9308 30 9 FC250 4,094,0 1U-3252 WTL 135-8258 25 25 FC250 WTL 9 1U-3252 WTL 135-8258 FC250 WTL 4,0 1U-3252 WTL 135-8258 25 FC250 WTL Original solution: 9 4,0 1U-3252 WTL 135-8258 25 WTL FC300 WTL 1U-3302 WTL 135-9308 30 4 12FC350 1,8 FC200 1U-3202 135-8208 20 solution: 8,5 19 1U-3352 135-9337 WTL 5,6 Original 5,6 125,6FC300 12 FC300 FC300 WTL WTL 1U-3302 WTL 1U-3302 1U-3302 WTLWTL WTL 135-9308 WTL 135-9308 135-9308 3035 30 30 5,65,6 12FC300 FC300 WTL WTL135-9308 135-9308 the PHC features a1U-3302 12 FC300 WTL 1U-3302 WTL 135-9308 30 5,6 12 WTL 1U-3302 WTL 3030 5,6 12 FC300 WTL 1U-3302 WTL 135-9308 30 the PHC features a1U-3352 Part# Part# Part# WTL 135-9337 35 FC350 WTL 9 19 4,0 1U-3252 WTL 135-8258 25 FC250 Kg Kg Lb Kg Lb Lb OEM OEM OEM Size Size Size 14,0 31 FC400 WTL 7T-3402 WTL 135-9408 40 8,5 8,5 8,5 19 19 1U-3352 1U-3352 1U-3352 WTL WTL 135-9337 WTL 135-9337 135-9337 35 35 35 FC350 FC350 FC350 WTL WTL WTL 8,5 1919FC350 1U-3352WTL WTL135-9337 135-93373535 FC350 WTL White Iron 8,5 1U-3352 WTL 8,5FC400 19 1U-3352 WTL 135-9337 35 FC350 WTL 8,5Chrome 19 1U-3352 WTL 135-9337 35Size FC350 WTL Part# Chrome White Iron Kg Lb OEM 14,0 31 FC400 WTL 7T-3402 WTL 135-9408 40 5,6 12 FC300 1U-3302 135-9308 30 16,1 35 45 FC450 WTL 1U-3452 WTL 138-6458 14,0 14,0 14,0 31 31 31 FC400 FC400 WTL WTL 7T-3402 WTL 7T-3402 7T-3402 WTL WTL 135-9408 WTL 135-9408 135-9408 40 40 40 4 31 4FC200 4FC400 1,8 1,81,8 FC200 FC200 WTL 1U-3202 1U-3202 1U-3202 WTL WTL 135-8208 WTL 135-8208 135-8208 20 2020 wear-resistant insert 14,0 WTL 7T-3402 WTL 135-9408 40 wear-resistant insert 14,0 3150 FC400 WTL 7T-3402 WTL 135-9408 4055 14,0 31 FC400 WTL 7T-3402 WTL 135-9408 40 14,0 31 FC400 WTL 7T-3402 WTL 135-9408 40 16,1 35 45 FC450 WTL 1U-3452 WTL 138-6458 8,5 19 1U-3352 135-9337 35 FC350 1,8 FC200 WTL 1U-3202 WTL 135-8208 20 22,6 WTL 1U-3552 WTL 138-6558 16,1 16,1 16,1 35 35 35 45 45 45 FC450 FC450 WTL WTL 1U-3452 WTL 1U-3452 1U-3452 WTL WTL 138-6458 WTL 138-6458 138-6458 9 FC450 94FC250 9FC550 4,0 4,0 4,0 1U-3252 1U-3252 1U-3252 WTL 135-8258 135-8258 135-8258 25 25 25 FC250 FC250 WTL for extreme 16,1 35 45 FC450 WTL 1U-3452 WTL 138-6458 for extreme 16,1 35 4560 FC450 WTL 1U-3452 WTL 138-6458 16,1 35 45 FC450 WTL 1U-3452 WTL 138-6458 16,1 35 45 FC450 WTL 1U-3452 WTL 138-6458 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 14,0 31 FC400 WTL 7T-3402 WTL 135-9408 40 9FC300 4,0 1U-3252 WTL 135-8258 25 FC250 WTL 39,9 88 6I-6602 WTL 135-9608 FC600 penetration 22,6 22,6 22,6 50 FC550 50 50 FC550 FC550 WTL WTL 1U-3552 WTL 1U-3552 1U-3552 WTL WTL 138-6558 WTL 138-6558 138-6558 55 55 55 5,6 5,6 5,6 12 12 12 FC300 FC300 WTL 1U-3302 1U-3302 1U-3302 WTL 135-9308 135-9308 135-9308 30 30 30 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 penetration 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 39,9 88 6I-6602 WTL 135-9608 60 FC600 WTL 16,1 35 45 FC450 1U-3452 WTL 138-6458 5,6 12 FC300 WTL 1U-3302 WTL 135-9308 30 54,2 4T-4702 WTL 70 FC700 WTL 39,9 39,9 88 88 88 6I-6602 6I-6602 6I-6602 WTL WTL 135-9608 WTL 135-9608 135-9608 60 60 60 FC600 FC600 FC600 WTL WTL WTL 8,539,9 8,5 8,5119 19 19 19 1U-3352 1U-3352 1U-3352 WTL WTL 135-9337 WTL 135-9337 135-9337 35 35 35 FC350 FC350 FC350 WTL 39,9 88 6I-6602 WTL 135-9608 60 FC600 WTL 39,9 88 6I-6602 WTL 135-9608 60 FC600 WTL 39,9 88 6I-6602 WTL 135-9608 60 FC600 WTL 39,954,2 88 6I-6602 WTL 135-9608 6055 FC600 WTL 54,2 4T-4702 WTL 70 119 FC700 WTL 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 8,5 19 1U-3352 WTL 135-9337 35 FC350 WTL 54,2 54,2 4T-4702 4T-4702 4T-4702 WTL WTL WTL 70 70 70 119 FC700 119 FC700 FC700 WTL WTL WTL 14,0 14,0 14,0 31119 31 FC400 31 FC400 FC400 WTL 7T-3402 7T-3402 7T-3402 WTL WTL 135-9408 WTL 135-9408 135-9408 40 40 40 54,2 4T-4702 WTL 70 119 FC700 WTL 700HB 54,2 4T-4702 WTL 70 119 FC700 WTL 54,288 4T-4702 WTL 70 FC700 WTL 54,239,9 4T-4702 WTL 7060 119 FC700 WTL 6I-6602 WTL 135-9608 FC600 WTL 14,0 31119 FC400 WTL 7T-3402 WTL 135-9408 700HB 16,1 16,1 16,1 3535 35FC450 4540 4545 FC450 FC450 WTL WTL WTL 1U-3452 1U-3452 1U-3452 WTL WTL 138-6458 WTL 138-6458 138-6458 54,2 4T-4702 16,1119 35 FC700 45 FC450 WTL WTL 1U-3452 WTL WTL 138-6458 70 22,6 22,6 22,6 5050 FC550 50FC550 FC550 WTL WTL WTL 1U-3552 1U-3552 1U-3552 WTL WTL 138-6558 WTL 138-6558 138-6558 555555 22,6 50 FC550 WTL 1U-3552 WTL 138-6558 55 IMPACT 39,9 39,9 39,9 8888 88FC600 6I-6602 6I-6602 6I-6602 WTL WTL 135-9608 WTL 135-9608 135-9608 606060 FC600 FC600 WTL WTL WTL I88FC700 IMPACT 39,9 FC600 WTL 6I-6602 WTL 135-9608 60 IMPACT IMPACT IMPACT 54,2 54,2 54,2 4T-4702 4T-4702 WTL WTL WTL 707070 119 119 119 FC700 FC700 WTL WTL WTL 4T-4702 IMPACT 54,2 4T-4702 WTL 70 119 FC700 WTL IMPACT IMPACT

Kg Lb Part# OEM Size Kg Lb Part# OEM Size Part# Part# Part# Part# Part# Kg1,2 Kg Lb Kg OEM OEM OEM Size Size Size Kg Kg Lb LbPart# LbPart# OEM OEM 20 Size Size Size Kg LbLb OEM Size LbFC200 OEM Size FC200 TL 1U-3202 20 1,5Kg RC - OEM 3Lb TL, 9W-8209 3Kg Part# Part# Kg Lb OEM Size Kg Lb OEM Size Part# Part# Part# Part# Kg Lb Kg Part# Lb Kg Lb OEM OEM Size Size Size Kg Kg LbLb OEM OEMSize Size Size Part# TL 1U-3252 OEM 2520 4,01,5 FC250 RCRCRCRC OEM -- - - 25 6 FC200 TL,9W-8209 9W-8259 1,2 202020 TL, 9W-8209 1,22,61,2 FC200 TL TL TL1U-3202 20 2020 1,5 1,5391,53FC200 FC200 20 31,2 33 FC250 3FC200 1U-3202 1U-3202 1U-3202 TL, TL, TL, 9W-8209 9W-8209 3 FC200 3FC200 1,2 FC200 TL 20 1,5 FC200 RC 20 3 1U-3202 TL, 9W-8209 3 1,2 FC200 TL1U-3252 20 1,5 1,5 FC200 RC OEM 20 1U-3202 TL, 9W-8209 1,2Kg FC200 TL 20 1,5 FC200 RC 20 1U-3202 TL, 9W-8209 3FC200 TL 20 RC -RC--125-8309 1U-3202 TL, 3Lb 3,7 6,04,0 8 FC250 TLTL 13 FC300 RC 1U-3302 TL,9W-8209 9W-8309 3025 1U-3302 30 2,6 FC250 RCRC - - -- 20 252525 6 FC300 TL, 9W-8259 9FC250 2,6 2,6 FC250 FC250 TL TL 25 2525 4,0 4,0 FC250 RC 25 632,6 6FC200 63Part# 1U-3252 1U-3252 1U-3252 TL, 9W-8259 TL, TL, 9W-8259 9W-8259 94,0 9 Part# 93FC250 Lb OEM Size Kg Size 2,6 62,6 FC250 TL1U-3252 25 25 4,0 4,0 9 94,0 FC250 RC -6 FC250 1U-3252 TL,9W-8259 9W-8259 FC250 TL1U-3302 FC250 RC - 125-8309 25 1U-3252 TL, 9W-8259 9FC300 2,66,3 TL 25 4,0 FC250 RC 1U-3352 25 1U-3252 TL, 9W-8259 9FC250 TL 25 RC -RC 2525 TL, 8,7 14 TL 19 FC350 RC 1U-3352 TL,9W-8309 9W-2359 35 119-9359 35 3,7 8 FC350 13 FC300 TL, 9W-8309 1U-3302 125-8309 303030 3,7 3,7 6,0 6,0 83,7 8FC250 86FC300 FC300 TL TL 13 FC300 13 13 FC300 RC 1U-3302 1U-3302 1U-3302 TL, TL, TL, 9W-8309 9W-8309 30 3030 1U-3302 1U-3302 1U-3302 RC 125-8309 RC RC 125-8309 30 1,2 FC200 TLTL 2030 1,56,0 FC200 RCRCRC -RC 20 3 FC300 1U-3202 TL, 9W-8209 36,0 3,7 6,0 8 FC300 TL 13 FC300 RC 1U-3302 TL, 9W-8309 30 1U-3302 RC 125-8309 30 3,7 6,0 8FC350 FC300 TL1U-3352 13 FC300 RC 1U-3302 TL, 9W-8309 30 6,0 1U-3302 RC 125-8309 30 FC300 TL 1319 FC300 RC 1U-3302 TL, 30 1U-3302 RCRC 125-8309 3040 3,7 6,0 86,3 FC300 TL 13 FC300 RC 1U-3302 TL, 9W-8309 30 1U-3302 RC 125-8309 30 11,0 11,6 24 FC400 TL 7T-3402 TL,9W-8309 6Y-5409 40 26 RC 7T-3402 124-7409 6,3 8,7 14 19FC400 FC350 RC TL, 9W-2359 1U-3352 119-9359 353535 6,3 6,3 8,7 8,7 14 14 FC350 14 FC350 TL TL 19 19 FC350 FC350 RC RC RC 1U-3352 1U-3352 1U-3352 TL, 9W-2359 TL, TL, 9W-2359 9W-2359 35 35Size 35 1U-3352 1U-3352 1U-3352 RC 119-9359 RC RC 119-9359 119-9359 35 2,6 FC250 TLTL 2535 4,0 FC250 RC -RC 25 6Lb 1U-3252 TL, 9W-8259 98,7 Part# Part# Part# Part# Part# Kg Kg Kg Lb LbPart# OEM OEM OEM Size Size KgKg Kg LbFC350 Lb Lb OEM OEM OEM Size Size Size 6,3 8,7 14 FC350 TL 19 FC350 RC 1U-3352 TL, 9W-2359 35 1U-3352 RC 119-9359 35 FC350 TL 1926 FC350 RC 1U-3352 TL, 9W-2359 35 1U-3352 RCRC 119-9359 3545 6,3 8,7 14FC400 FC350 TL7T-3402 19 FC350 RC 1U-3352 TL, 9W-2359 35 8,7 1U-3352 RC 119-9359 35 6,3 8,7 14 FC350 TL 19 FC350 RC 1U-3352 TL, 9W-2359 35 1U-3352 RC 119-9359 35 12,9 15,7 28 FC450 TL 4540 35 FC450 RC 1U-3452 TL, 7T-8459 1U-3452 116-7459 11,0 11,6 24 TL, 6Y-5409 26 FC400 RC 404040 7T-3402 RC 124-7409 11,0 11,0 11,0 11,6 11,6 11,6 24 FC400 24 FC400 TL 7T-3402 TL 7T-3402 7T-3402 TL, 6Y-5409 TL, TL, 6Y-5409 6Y-5409 40 4040 FC400 26 26 FC400 FC400 RC RC RC 40 7T-3402 7T-3402 7T-3402 RC 124-7409 RC RC 124-7409 124-7409 3,7 6,0 824 FC300 TLTL 13 FC300 1U-3302 TL, 9W-8309 30 1U-3302 RC 125-8309 30 Part# Part# Kg Lb OEM Size Kg Lb OEM Size 11,0 11,6 24 FC400 TL 7T-3402 TL, 6Y-5409 40 26 FC400 RC 40 7T-3402 RC 124-7409 1,2 1,2 1,2 FC200 FC200 FC200 TL TL TL 20 20 20 1,5 1,5 1,5 FC200 FC200 FC200 RC RC RC 20 20 20 3 3 3 1U-3202 1U-3202 1U-3202 TL, TL, 9W-8209 TL, 9W-8209 9W-8209 3 3 3 FC400 TL 7T-3402 TL, 6Y-5409 40 2635 FC400 RC 4055 7T-3402 RCRC 124-7409 11,0 11,6 24FC450 FC400 TL1U-3452 7T-3402 TL, 6Y-5409 40 11,6 26 FC400 RC 40 7T-3402 RC 124-7409 11,0 11,6 24 FC400 TL 7T-3402 TL, 6Y-5409 40 26 FC400 RC 40 7T-3402 RC 124-7409 17,5 26,0 39 FC550 TL 57 FC550 RC 1U-3552 TL, 9W-6559 5545 1U-3552 113-0559 12,9 15,7 28 FC450 TL 35 FC450 RC 454545 TL, 7T-8459 1U-3452 RC 116-7459 12,9 12,9 12,9 15,7 15,7 15,7 28 28 FC450 28 FC450 TL TL TL 45 4545 FC450 35 35 FC450 FC450 RC RC RC 45 1U-3452 1U-3452 1U-3452 TL, 7T-8459 TL, TL, 7T-8459 7T-8459 1U-3452 1U-3452 1U-3452 RC 116-7459 RC RC 116-7459 116-7459 6,3 8,7 14 FC350 TL 19 FC350 1U-3352 TL, 9W-2359 35 1U-3352 RC 119-9359 35 12,9 15,7 28 FC450 TL 45 35 FC450 RC 45 1U-3452 TL, 7T-8459 1U-3452 RC 116-7459 1,2 FC200 TL 20 1,5 FC200 RC 20 3 1U-3202 9W-8209 3 2,6 2,6 2,6 FC250 FC250 FC250 TL TL TL 25 25 25 4,0 4,0 4,0 FC250 FC250 FC250 RC RC RC 25 25 25 6 6 6 1U-3252 1U-3252 1U-3252 TL, TL, 9W-8259 TL, 9W-8259 9W-8259 9 9 9 FC450 TL 45 3557 FC450 RC 4560 1U-3452 TL, 7T-8459 1U-3452 RC 116-7459 12,9 15,7 28FC550 FC450 TL1U-3552 45 15,7 35 FC450 RC 45 1U-3452 TL, 7T-8459 1U-3452 RC 116-7459 30,3 42,8 67 FC600 TL 94 FC600 RC 6I-6602 TL, 107-8609 60 6I-6602 RC 119-9609 12,9 15,7 28 FC450 TL 45 35 FC450 RC 45 1U-3452 TL, 7T-8459 1U-3452 RC 116-7459 17,5 26,0 39 FC550 TL 57 FC550 RC TL, 9W-6559 55 1U-3552 RC 113-0559 555555 17,5 17,5 17,5 26,0 26,0 26,0 39 39 FC550 39 FC550 TL TL TL FC550 57 57 FC550 FC550 RC RC 1U-3552 1U-3552 1U-3552 TL, 9W-6559 TL, TL, 9W-6559 9W-6559 55 55 55 1U-3552 1U-3552 1U-3552 RC 113-0559 RC RC 113-0559 113-0559 55 11,0 11,6 24 FC400 TL 7T-3402 TL, 6Y-5409 40 26 FC400 RC 40 7T-3402 RC 124-7409 17,5 26,0 FC550 TL 57 FC550 RC 1U-3552 TL, 9W-6559 55 1U-3552 113-0559 55 2,6 FC250 TLTL 25 4,0 FC250 RC -RC 25303030 6 8FC550 1U-3252 TL, 9W-8259 913 3,7 3,7 3,7 6,0 6,0 6,0 839 FC300 8FC300 FC300 TL TL1U-3302 13 FC300 13 FC300 FC300 RC RC RC 1U-3302 1U-3302 TL, TL, 9W-8309 TL, 9W-8309 9W-8309 3060 3055 30 26,0 1U-3302 1U-3302 1U-3302 RC 125-8309 RC 125-8309 125-8309 TL 57 FC550 RC 1U-3552 TL, 9W-6559 55 1U-3552 RCRC 113-0559 5570 44,0 53,0 9767 FC700 TLTL 4T-4702 TL 70 117 FC700 RC 4T-4702 RC 17,5 26,0 39 FC550 TL 57 FC550 RC 1U-3552 TL, 9W-6559 1U-3552 RC 113-0559 55 30,3 42,8 67 FC600 94 FC600 RC 6I-6602 TL, 107-8609 6I-6602 RC 119-9609 606060 17,5 26,0 39 FC550 TL 57 FC550 RC 1U-3552 TL, 9W-6559 55 1U-3552 RC 113-0559 55 30,3 30,3 30,3 42,8 42,8 42,8 67 FC600 67 FC600 FC600 TL TL TL 94 FC600 94 94 FC600 FC600 RC RC 6I-6602 6I-6602 6I-6602 TL, 107-8609 TL, TL, 107-8609 107-8609 60 60 60 6I-6602 6I-6602 6I-6602 119-9609 RC RC 119-9609 119-9609 60 12,9 15,7 28 FC450 TL 45 35 FC450 RC 45 1U-3452 TL, 7T-8459 1U-3452 RC 116-7459 30,3 42,8 67 FC600 TL 94 FC600 RC 6I-6602 TL, 107-8609 60 6I-6602 RC 119-9609 3,7 6,0 814 FC300 TLTL 13 FC300 RC 1U-3302 TL, 9W-8309 30 1U-3302 RC 125-8309 30353535 6,3 6,3 6,3 8,7 8,7 8,7 14 FC350 14 FC350 FC350 TL TL 19 19 FC350 19 FC350 FC350 RC RC RC1U-3352 1U-3352 1U-3352 1U-3352 TL, TL, 9W-2359 TL, 9W-2359 9W-2359 3570 3560 35 42,8 1U-3352 1U-3352 RC 119-9359 RC 119-9359 119-9359 30,3 67 FC600 TL 94 FC600 RC 6I-6602 TL, 107-8609 60 6I-6602 RC 119-9609 6060 68,5 82,5 151 FC800 TLTL TSJ800V 80 182 FC800 RC -RC 44,0 53,0 97 FC700 4T-4702 TL 117 FC700 RC 4T-4702 RC 707070 30,3 42,8 67 FC600 TL 94 FC600 RC 6I-6602 TL, 107-8609 6I-6602 RC 119-9609 60 30,3 42,8 67 FC600 TL 94 FC600 RC 6I-6602 TL, 107-8609 60 6I-6602 RC 119-9609 60 17,5 26,0 39 FC550 TL 57 FC550 RC 1U-3552 TL, 9W-6559 55 1U-3552 RC 113-0559 55 44,0 44,0 44,0 53,0 53,0 97 FC700 97 FC700 FC700 TL TL 4T-4702 4T-4702 4T-4702 TL TL TL 70 7070 117 117 FC700 117 FC700 FC700 RC RC 4T-4702 4T-4702 4T-4702 RC RC RC80 70 44,0 53,0 97 FC700 TL 4T-4702 TL6Y-5409 70 117 FC700 RC 4T-4702 RC 6,3 8,753,0 1497 FC350 TLTL 19 FC350 RC 1U-3352 TL, 9W-2359 35 1U-3352 RC 119-9359 35 11,0 11,0 11,0 11,6 11,6 11,6 24 24 FC400 24 FC400 FC400 TL TL7T-3402 TL 7T-3402 7T-3402 TL, TL, 6Y-5409 6Y-5409 4080 4070 40 53,0 26 26 FC400 26 FC400 FC400 RC RC RC 404070 40 7T-3402 7T-3402 7T-3402 RC 124-7409 RC 124-7409 124-7409 44,0 97 FC700 TL 4T-4702 TL 117 FC700 RC 4T-4702 RC 7070 68,5 82,5 151 FC800 TL TSJ800V 182 FC800 RCRC -RC 80 44,0 53,0 97 FC700 TL 4T-4702 TL70 117 FC700 RC 4T-4702 RC 44,0 53,0 97 FC700 TL 4T-4702 TLTL, 70 117 FC700 RC 4T-4702 RC 70 30,3 42,8 67 FC600 TL 94 FC600 RC 6I-6602 TL, 107-8609 60 6I-6602 RC 119-9609 60 68,5 68,5 68,5 82,5 82,5 82,5 151 151 FC800 151 FC800 FC800 TL TL TL TSJ800V TSJ800V TSJ800V 80 80 80 182 182 FC800 182 FC800 FC800 RC 80 8080 68,5 82,5 151 FC800 TL TSJ800V 80 182 FC800 RC -RC124-7409 80 11,0 11,6 2428 FC400 TLTL1U-3452 7T-3402 TL,TL, 6Y-5409 40 26 FC400 RC 40 7T-3402 RC 12,9 12,9 12,9 15,7 15,7 15,7 28 FC450 28 FC450 FC450 TL TL 45 45 45 35 35 FC450 35 FC450 FC450 RC RC RC 45 45 45 1U-3452 1U-3452 TL, 7T-8459 TL, 7T-8459 7T-8459 1U-3452 1U-3452 1U-3452 RC 116-7459 RC 116-7459 116-7459 68,5 82,5 151 FC800 TL TSJ800V 80 182 FC800 RC 80 68,5 82,5FC700 151 FC800 TL 4T-4702 TSJ800V 80 82,5 182 FC800 68,5 151 FC800 TL TSJ800V 80 182 FC800 RC RC4T-4702 - RC 80 80 44,0 53,0 97 FC700 TL TL 70 117 RC 70 12,9 15,7 2839FC550 FC450 TLTL1U-3552 45 35 FC450 RC 45555555 1U-3452 TL,TL, 7T-8459 1U-3452 RCRC116-7459 17,5 17,5 17,5 26,0 26,0 26,0 39 39 FC550 FC550 TL TL 57FC800 57 FC550 57 FC550 FC550 RCRC RC1U-3552 1U-3552 1U-3552 TL, 9W-6559 TL, 9W-6559 9W-6559 555555 82,5 1U-3552 1U-3552 RC 113-0559 RC 113-0559 113-0559 68,5 151 FC800 TL TSJ800V 80 182 RC 80 17,5 26,0 3967FC600 FC550 TLTL6I-6602 57 FC550 RC 1U-3552 TL,TL, 9W-6559 55 1U-3552 RC 55606060 30,3 30,3 30,3 42,8 42,8 42,8 67 67 FC600 FC600 TL TL 9494 FC600 94 FC600 FC600 RCRC RC 6I-6602 6I-6602 TL, 107-8609 TL, 107-8609 107-8609 606060 6I-6602 6I-6602 6I-6602 RC113-0559 RC 119-9609 RC 119-9609 119-9609 VECTOR TIGER 30,3 42,8 6797FC700 FC600 TLTLTL 94 FC600 RC 6I-6602 TL,4T-4702 107-8609 6I-6602 RC 119-9609 44,0 44,0 44,0 53,0 53,0 53,0 97 97 FC700 FC700 TL 4T-4702 4T-4702 TL TL TL 60 707070 117 117 FC700 117 FC700 FC700 RCRC RC 4T-4702 4T-4702 4T-4702 RCRCRC 60707070 TIGER SHARP VTL WTS VECTOR TIGER 44,0 53,0 97 FC700 TL TL 70 117 FC700 RC 70 VECTOR VECTOR VECTOR TIGER TIGER TIGER VECTOR TIGER 68,5 68,5 68,5 82,5 82,5 82,5 151 151 FC800 151 FC800 FC800 TLTLTL 4T-4702 TSJ800V TSJ800V TSJ800V 808080 TIGER 182 182 FC800 182 FC800 FC800 RCRCRC 4T-4702- RC - 808080 VECTOR LONG TIGER SHARP VECTOR TIGER 68,5 82,5 151 FC800 TL TSJ800V 80 182 FC800 RC 80 VECTOR TIGER TIGER TIGER TIGER SHARP SHARP SHARP TIGER SHARP

U UUUUUUU U

UNIVERSAL UNIVERSAL

UUUU

UNIVERSAL UNIVERSAL UNIVERSAL UNIVERSAL

TWIN TWIN TWIN TIGER TIGER TIGER 89 89 89 6060 FC600 FC600 FC600 SYL SYL SYL9W-8552 159-0607 159-0607 159-0607 40,6 40,6 40,6 LONG TWIN TIGER 58 FC550 SYL 26,5 SYL, 159-0559 6055 TWIN TIGER TWIN TIGER TWIN TIGER LONG LONG LONG TWIN TIGER LONG WHITE IRON SYL WHITE 89 IRON 60 FC600 40,6 159-0607 LONG LONG LONG LONG WEARWEARTWIN TIGER RESISTANT RESISTANT LONG INSERT INSERT TWIN TWIN TWIN TIGER TIGER TIGER LONG LONG LONG TWIN TIGER LONG

I II II II I

IMPACT IMPACT

I III

IMPACT IMPACT IMPACT IMPACT

Kg Lb Part# OEM Size Kg 9 Lb FC250 Part# OEM 25 Size 4,2 U 1U-3252 Kg Lb Part# OEM Size Kg Kg Part# Part# OEM OEM OEM Size Size Size KgKgLb Lb LbLbPart# Part# OEM Size 4,2 FC250 25 9Part# 1U-3252 FC300 U UOEM 30 9 1U-3302 Kg Lb Part# OEM Size Kg 4,2 Lb Size 4,2 FC250 2525 99FC250 1U-3252 4,2 4,2 4,29 99Lb FC250 FC250 U U UU1U-3252 U 1U-3252 25 Size 25 1U-3252 1U-3252 4,2 Kg Part# OEM 4,2 159 FC250 FC300 U 1U-3352 30 1U-330225 FC350 3525 6,6 4,2 FC250 U 9FC300 1U-3252 4,24,2 FC250 U UU 25 30 9 9 99 1U-3252 4,2 FC300 U 30 1U-3302 4,2 4,2 FC300 FC300 U U 30 30 9 1U-3302 1U-3302 1U-3302 4,2 UU U 1U-3302 FC350 1U-33523045 4,26,6 26 FC250 2535 915 FC300 1U-3252 FC450 9W-8452 11,9 4,2 FC300 U 30 9FC350 1U-3302 4,26,6 FC300 U UU1U-3352 30 35 9 1515 1U-3302 FC350 1U-3352 35 6,6 15 15 FC350 FC350 U U 1U-3352 1U-3352 35 35 6,6 6,6 UU U 1U-3352 6,6 FC450 9W-8452353045 11,9 926 FC350 4,2 FC300 1U-3302 15 FC350 U 9W-8452 1U-3352 35 6,6 15 FC350 U UU 1U-3352 35 6,6 FC450 9W-8452 45 11,9 Kg Kg Kg Lb26 Lb26 Lb Part# Part# Part# OEM OEM OEM45 Size Size Size 26 26 FC450 FC450 FC450 U 9W-8452 U 9W-8452 45 45 11,9 11,9 11,9 FC450 UU 9W-8452 45 11,9 Kg Lb Part# OEM Size 15 FC350 1U-3352 35 6,6 U 9W-8452 26 26 FC450FC450 U 9W-8452 45 45 11,9 11,9 4,24,2 4,2 FC250 FC250 FC250 U U U 25 25 25 9 9 9 1U-3252 1U-3252 1U-3252 26 FC450 U 9W-8452 45 11,9 4,2 FC250 U 9 1U-3252 25 4,24,24,2 FC300 FC300 U UUU1U-3302 3030 30 1U-3302 1U-3302 4,2 9 9 99 FC300 FC300 30 1U-3302

Kg Lb Part# OEM Size Kg11LbFC300 Part# OEM Size 5,2 1U-3301 30 I Kg Lb Part# OEM Size KgKg Kg Lb Kg LbPart# Part# Part# OEM OEM OEM Size Size Size LbLbPart# OEM Size 5,2 1U-3301 FC300 1U-3351 3530 1611 FC350 I I Kg Lb Part# OEM Size Kg 7,1 Lb Part# OEM Size 5,2 1U-3301 30 11 FC300 5,25,2 5,2 5,2 1U-3301 1U-3301 30 3030 11 11 FC300 11 FC300 FC300 I I II I 1U-3301 30 11 FC300 Kg Lb Part# OEM Size 1U-3351 7,1 35 16 FC350 I 1U-3301 14,4 32 FC450 I 9W-8451 / 1U-3451 45 5,216 1U-3301 35 30 11FC350 FC300 5,27,1 1U-3301 3035 11 FC300 I II II 1U-3351 1U-3351 7,1 16 1U-3351 1U-3351 7,1 7,1 35 35 16 FC350 16 FC350 FC350 I 1U-3351 7,1 35 16 FC350 I I 9W-8551 14,4 FC450 I 9W-8451 / 1U-3451 5,2 1U-3301 3045 1132 FC300 / 1U-3551 21,8 48 55 7,132 35 16FC550 FC350 I 9W-8451 1U-3351 7,114,4 3545 16 FC350 14,4 32 FC450 II 9W-8451 //1U-3451 14,4 32 14,4 FC450 32 FC450 FC450 II 9W-8451 / 1U-3351 1U-3451 /1U-3551 1U-3451 45 45 45 14,4 32 FC450 I 9W-8451 / 1U-3451 45 /1U-3451 21,8 48 FC550 II 9W-8551 55 1U-3351 7,1 35 16 FC350 I 9W-8451 14,4 32 FC450 9W-8451 1U-3451 45 14,4 32 FC450 9W-8451 1U-3451 45 /OEM 1U-3551 21,8 48 FC550 II 9W-8551 55 Kg Kg Kg Lb Lb Lb Part# Part# Part# OEM OEM Size Size 9W-8551 //OEM 1U-3551 1U-3551 // 1U-3551 21,8 21,8 48 21,8 48 FC550 48 FC550 FC550 II 9W-8551 II 9W-8551 55 55Size 55 / 1U-3551 21,8 48 FC550 I 9W-8551 55 Kg Lb Part# Size 14,4 32 FC450 I 9W-8451 //1U-3451 45 / 1U-3551 48 FC550 I 9W-8551 / 1U-3551 21,8 21,8 48 FC550 I 9W-8551 55 55 5,2 5,2 5,2 1U-3301 1U-3301 1U-3301 30 30 11 11 11 FC300 FC300 FC300 I I I 9W-8551 / 1U-3551 21,8 48 FC550 I 55 5,2 11 FC300 I 1U-3301 30 30 1U-3351 1U-3351 3535 7,17,1 7,1 3535 1616 FC350 FC350 FC350 I II I 1U-3351 1U-3351 7,1 1616 FC350

15FC350 FC350 FC350 U UUU1U-3352 1U-3352 1U-3352 3535 35 6,66,66,6 FC350 1U-3352 35 6,6151515 26FC450 FC450 FC450 U UUU9W-8452 9W-8452 9W-8452 4545 45 11,9 11,9 11,9262626 FC450 9W-8452 45

14,4 14,4 14,4 3232 FC450 FC450 FC450 I 9W-8451 II 9W-8451 I 9W-8451 / 1U-3451 1U-3451 / 1U-3451 4545 4545 14,4 3232 FC450 9W-8451 // 1U-3451 / 1U-3551 1U-3551 / 1U-3551 21,8 21,8 21,8 4848 FC550 FC550 FC550 I 9W-8551 I 9W-8551 I 9W-8551 5555 5555 9W-8551 // 1U-3551 21,8 4848 FC550

LIGHT RPL LIGHT PENETRATION PENETRATION LIGHT LIGHT LIGHT PENETRATION LIGHT LIGHT LIGHT ROCK PENE-

RPL RPL RPL TRATION

ROCK ROCK ROCK PENETRATION PENETRATION PENETRATION PENETRATION Kg Lb Part# LIGHT LIGHT LIGHT LIGHT LIGHT

OEM Size Kg 4 Lb FC200 Part# OEM 20 Size 1,9 RPL 4T-2203 Kg Lb Part# OEM Size Kg Lb Part# OEM Size Kg Kg3,8 Kg Lb Part# Part# OEM OEM OEM SizeSize Size 4Part# 1,9LbLb FC200 RPL 4T-2203 20 8 FC250 RPL 9N-4252 25 4 1,9 FC200 RPL OEM 4T-2203 20 Kg Lb Part# Part# OEMSize20 Size Kg 1,9 Lb 4Lb FC200 RPL 4T-2203 Kg Part# OEM Size 8 FC200 FC250 RPL 9N-4252 25 43,8 413 4FC200 1,9 1,9 1,9 FC200 RPLRPL RPL 4T-2203 4T-2203 4T-2203 20 20 9N-4302 3020 FC300 RPL 6,0 8 3,8 FC250 RPL 9N-4252 25 FC250 9N-4252 1,9 FC200 RPL 4T-2203 4 8 44FC200 1,9 3,8 RPLRPL 4T-2203 20252020 1,9 FC200 RPL 4T-2203 9N-4302 30 13 FC250 FC300 RPL 6,0 8 8 8 3,8 3,8 3,8 FC250 FC250 RPL RPL RPL 9N-4252 9N-4252 9N-4252 25 25 25 9N-4352 35 19 FC350 RPL 8,5 9N-4302 3030 13 FC300 FC300RPL RPL 9N-4302 6,0 13 3,8 FC250 RPL 9N-4252 8 88FC250 3,8 6,0 RPL RPL 9N-4252 25 2525 3,8 FC250 9N-4252 9N-4352 35 19 FC300 FC350 RPL 8,5 9N-4302 9N-4302 9N-4302 30 30 30 13 1319 13 FC300 FC300 RPLRPL RPL 6,0 6,0 6,0 25 FC400 RPL 8E-4402 40 11,5 9N-4352 35 FC350 RPL 8,5 Kg Lb Part# OEM Size 9N-4352 35 19 FC350 RPL 8,5 KgKg Kg LbLb Lb Part# Part# Part# OEM OEM OEM30 Size Size Size 9N-4302 30 13 FC300 RPL 6,0 9N-4302 13 FC300 RPL 6,0 9N-4302 30 13 FC300 RPL 6,0 25 FC350 FC400 RPL 8E-4402 40 11,5 39 FC450 RPL 9N-4452 45 17,9 9N-4352 9N-4352 9N-4352 35 35 35 19 19 19 FC350 FC350 RPL RPL RPL 8,5 8,5 8,5 25 FC400 RPL 8E-4402 40 11,5 4 FC400 1,9 25 FC200 RPL 4T-2203 20 RPL 8E-4402 9N-4352 35 19 FC350 RPL 8,5 9N-4352 35 FC350 RPL 8,5 9N-4352 35 194 419 RPL 8,5 4FC350 1,911,5 1,9 1,9 FC200 FC200 FC200 RPL RPL 4T-2203 4T-2203 4T-2203 2040 20 20 39 FC450 RPL 9N-4452 45 17,9 FC550 RPL 9N-4552 5540 22,0 25 2548 25 FC400 FC400 FC400 RPLRPL RPL 8E-4402 8E-4402 8E-4402 40 40 11,511,5 11,5 39 FC450 RPL 9N-4452 17,9 8 FC450 3,8 39 FC250 RPL 9N-4452 9N-4252 4545 25 RPL 25 FC400 RPL 8E-4402 40 11,5 25 FC400 RPL 8E-4402 40 11,5 25 FC400 RPL 8E-4402 40 11,5 8 8 8 3,817,9 3,8 3,8 FC250 FC250 FC250 RPL RPL 9N-4252 9N-4252 9N-4252 25 25 25 48 FC550 RPL 9N-4552 55 22,0 85 FC600 RPL 7Y-0602 6045 38,8 39 39 39 FC450 FC450 FC450 RPL RPL RPL 9N-4452 9N-4452 9N-4452 45 45 17,917,9 17,9 48 FC550 RPL 9N-4552 55 22,0 9N-4302 5545 30 13 FC550 FC300 RPL 9N-4552 6,0 48 RPL FC450 RPL 9N-4452 17,9 39 FC450 RPL 9N-4452 17,9 39 FC450 RPL 9N-4452 45 17,9 9N-4302 9N-4302 9N-4302 303045 30 131339 13 FC300 FC300 FC300 RPL RPL 6,022,0 6,0 6,0 85 FC600 RPL 7Y-0602 60 38,8 48 48 48 FC550 FC550 FC550 RPL RPL RPL 9N-4552 9N-4552 9N-4552 55 55 55 22,022,0 22,0 85 FC600 RPL 7Y-0602 38,8 9N-4352 6060 35 19 FC600 FC350 RPL 7Y-0602 8,5 85 12 22,0 RPL FC550 RPL 9N-4552 55 22,0 48 FC550 RPL 9N-4552 55 22,0 48 FC550 RPL 9N-4552 55 9N-4352 9N-4352 9N-4352 3535 35 191948 19 FC350 FC350 FC350 RPL RPL 8,538,8 8,5 8,5 85 8525 85 FC600 FC600 FC600 RPLRPL RPL 7Y-0602 7Y-0602 7Y-0602 60 60 60 38,838,8 38,8 12 FC400 RPL 8E-4402 40 11,5 FC600 RPL 7Y-0602 6060 38,8 12 38,8 85 FC600 RPL 7Y-0602 38,8 85 FC600 RPL 7Y-0602 60 252585 25 FC400 FC400 FC400 RPL RPL 8E-4402 8E-4402 8E-4402 4040 40 11,5 11,5 11,5 12 FC450 RPL 9N-4452 45 17,9 39 1212 12 17,9 393939FC450 FC450 FC450 RPL RPL RPL 9N-4452 9N-4452 9N-4452 454545 17,9 17,9 12 12 FC550 RPL 9N-4552 55 22,0 48 484848FC550 FC550 FC550 RPL RPL RPL 9N-4552 9N-4552 9N-4552 555555 22,0 22,0 22,0 FC600 RPL 7Y-0602 60 38,8 85 858585FC600 FC600 FC600 RPL RPL RPL7Y-0602 7Y-0602 7Y-0602 606060 38,8 38,8 38,8

8

RP TRATION TRATION PENEPENETRATION TRATION TRATION PENETRATION TRATION TRATIONPENEROCK

RPRPRP

ROCK TRATION ROCK ROCK ROCK PENEPENEPENEPENEPart# Kg Lb TRATION TRATION TRATION TRATION Part#

OEM Size Kg 13Lb FC250 RP 4T-2253 OEMRP 25 Size 5,9 Part# Kg Lb OEM Size Part# Kg Lb 13 FC300 OEM Size 30 RPRP 4T-2303 25 FC250 RPRP 8,45,9 4T-2253 Part# Part# Kg Kg Kg Lb 18 LbLbPart# OEM OEM OEM Size Size 25Size FC250 RP 4T-2253 RP 25 5,9Kg13 13LbFC250 Part# RP Part# OEM Size 4T-2253 RPRPRP Kg5,9 Lb 26 OEM Size Part# 35 FC350 RP 30 FC300 RP Kg8,4 Lb18 OEM 4T-2353 4T-2303 25 25 FC250 FC250 RP RP RP RP4T-2303 4T-2253 4T-2253 4T-2253 RP RP RP25 RPSize 5,911,7 5,9 13 13 13 FC300 30 8,45,9 18FC250 30 FC300 RP 4T-2303 RP 8,4 18 40 FC400 RP 35 FC350 RP 25 FC250 RP 7T-3403 35FC300 4T-2353 RP 11,7 26 2525 FC250 RPRP 4T-2253 RP 5,9 13 FC250 4T-2253 RPRP 5,916,1 13 18 4T-2253 RP 5,9 13 30 30 FC300 FC300 RP RP RP 4T-2303 4T-2303 4T-2303 RP RP RP 8,4 8,4 8,4 18 18 35 30 FC350RP RP 4T-2353 RP 35 11,7 26 26 FC350 4T-2353 RP 11,7 FC450 RPRP 40 FC400 9W-1453 RP 24,0 53FC350 7T-3403 RP 16,1 35 30 FC300 RP 3045 FC300 RPRP 4T-2303 RP 8,4 18 FC300 4T-2303 RPRP 8,411,7 18 26 30 4T-2303 8,4 18 35 35 35 FC350 FC350 RP RP4T-2353 RP 4T-2353 4T-2353 RP RP RP 11,7 11,7 26 40 FC400 RP 7T-3403 RP 16,1 3526FC400 40 RP 7T-3403 RP 16,1 35 9W-1553 RPRP FC450 RP 45 9W-1453 24,0 53 35 FC350 RP 35Size FC350 RPRP 4T-2353 RP 11,7 26 FC550 35 FC350 4T-2353 RPRP 11,7 26 35 4T-2353 11,7 26 Part# 55 Kg LbFC400 OEM 29,0 64 40 40Size 40 FC400 FC400 RP RP RP 7T-3403 7T-3403 7T-3403 RP RPRP 16,1 16,1 16,1 35 35 FC450 RP 45 9W-1453 24,0 53 Part# Part# Part# Kg Kg Kg Lb Lb LbFC450 OEM OEM OEM Size Size 6Y-2553 RP 45 9W-1453 RP 24,0 53 9W-1553 RP 40 FC400 RP9W-1553 40 40 FC400 RPRP 7T-3403 RP 16,1 35 FC400 7T-3403 RP 16,1 35 7T-3403 RP 16,1 35 53 FC550 RP 55 29,0 64 25 FC250 RP FC450 FC450 FC450 RP RP 45 45 45 4T-2253 RP 5,9 13 9W-1453 9W-1453 9W-1453 RP RP RP 24,0 24,0 24,0 53 53 60 FC600 RP 6I-6603 RP 114 51,7 6Y-2553 FC550 RP 55 25 25 25 FC250 FC250 FC250 RP RP RP 9W-1553 RP 29,0 64 4T-2253 4T-2253 4T-2253 RP RP RP 5,9 5,9 5,9 13 13 13 RP 55 FC450 RP 45 FC450 RP9W-1453 45 29,0 6Y-2553 FC450 RP 45 RP 24,0 53 9W-1453 RP 24,0 53FC550 9W-1453 RPRP 24,0 5364 30 FC300 RP 9W-1553 9W-1553 9W-1553 RP RP RP 4T-2303 RP 8,4 18 6Y-2553 70 FC700 RP 60 FC600 RP 4T-4703 143 65,2 6I-6603 RP 114 51,7 FC550 FC550 FC550 RP RP RP 55 55 55 29,0 29,0 29,0 64 64 64 30 30 30 FC300 FC300 FC300 RP 4T-2303 4T-2303 4T-2303 RP RP RP 8,4 8,4 8,4 18 18 18 60 FC600 RP 6I-6603 RP 114 51,7 9W-1553 RP 6Y-2553 6Y-2553 6Y-2553 9W-1553 RP 9W-1553 RP 35 FC350 RP 60 FC600 RP FC550 RPRP 55 4T-2353 11,7 26 6I-6603 RPRPRP 114 51,7 FC550 RP 55 29,0 64 FC550 RP 55 29,0 64 80 FC800 70 FC700 29,0 64 6I-8803 220 100,2 4T-4703 143 65,2 6Y-2553 35 35 35 FC350 FC350 FC350 RPRP RPRP RP 6Y-2553 4T-2353 4T-2353 4T-2353 RPRP RPRP RP 11,7 11,7 11,7 26114 26 26 6Y-2553 70 FC700 60 60 60 FC600 FC600 FC600 RP RP 4T-4703 143 65,2 6I-6603 6I-6603 6I-6603 RP RP 114 114 51,7 51,7 51,7 40 FC400 RP 70 FC700 RP 7T-3403 16,1 35 4T-4703 RPRP 6080 143 65,2 FC800 RP 6I-8803 220 100,2 FC600 6I-6603 114 51,7 60 FC600 RP 60 FC600 RP 6I-6603 RP 114 51,7 6I-6603 RP 40 4070 40 114 FC400 FC400 FC400 RPRP RP 51,7 7T-3403 7T-3403 7T-3403 RPRP RP 16,1 16,1 16,1 35143 35 35 80 FC800 RP 70 70 FC700 FC700 FC700 RP RP RP 6I-8803 220 100,2 4T-4703 4T-4703 4T-4703 RP RP RP 143 143 65,2 65,2 65,2 FC450 RP 45 80 FC800 RP RP 70 24,0220 53 FC700 RP 9W-1453 6I-8803 RP 100,2 4T-4703 143 65,2 70 FC700 RP 70 FC700 RP 4T-4703 RP 143 65,2 4T-4703 RPRPRP80 143 FC450 FC450 FC450 RPRP RPRP 65,2 4580 4580 45 9W-1453 9W-1453 9W-1453 RP 24,0 24,0 24,0 53220 53 53 FC800 FC800 FC800 RP 6I-8803 6I-8803 6I-8803 220 220 100,2 100,2 100,2 9W-1553 RP FC550 RPRP 55 80 80 FC800 RP 29,0 64 6I-8803 220 100,2 FC800 FC800 RP 6I-8803 220 100,2 9W-1553 9W-1553 9W-1553 RPRP80 RP 6I-8803 220 100,2 6Y-2553 FC550 FC550 FC550 RPRPRP 555555 29,0 29,0 29,0 646464 6Y-2553 6Y-2553 6I-6603 RP 60 51,7 114 FC600 RP 6Y-2553 606060 FC600 FC600 FC600 RPRPRP 6I-6603 6I-6603 6I-6603 RPRPRP 114 114 114 51,7 51,7 51,7 65,2 143 FC700 RP 4T-4703 RP 70 7080 7070 FC700 FC700 FC700 RPRPRP 4T-4703 4T-4703 4T-4703 RPRPRP 143 143 143 65,2 65,2 65,2 6I-8803 100,2 220 FC800 RP FC800 FC800 FC800 RPRPRP6I-8803 6I-8803 6I-8803 808080 220 220 220 100,2 100,2 100,2

RCRC RC RC RC RC RCRCRC RC RCRCRC RC

TIGER ROCK FC450 45 FC550 FC550 FC550 FF F7J-9550 F7J-9550 555555 ROCK 8J-1450, 107-3450 41 18,5 TIGER TIGER TIGER ROCK ROCK ROCK 7J-9550 107-3550 107-3550 107-3550 63 6363 28,8 28,8 28,8 LONG CHISEL TIGER ROCK TIGER ROCK TIGER ROCK TIGER LONG LONG LONG CHISEL CHISEL CHISEL TIGER ROCK LONG CHISEL 63 FC550 F 7J-9550 107-3550 55 28,8 CHISEL LONG CHISEL LONG LONG CHISEL LONG CHISEL TIGER ROCK LONG CHISEL TIGER TIGER TIGER ROCK ROCK ROCK LONG LONG LONG CHISEL CHISEL CHISEL TIGER ROCK LONG CHISEL

VTL VTL VTL VTL VTL VTL VTL VTL VECTOR TIGER LONG VTL VTL VTL VTL

TIGER LONG TIGER VECTOR TIGER LONG LONG LONG LONG LONG TIGER LONG LONG LONG VECTOR VECTOR VECTOR VECTOR TIGER TIGER TIGER Kg Lb Part# OEM Size TIGER LONG LONG LONG Kg Part# OEM Size 13,0 VTL 1U-3452 TL, 7T-8459 45 29LbFC450 LONG Kg Lb Part# OEM Size

WTS WTS WTS WTS WTS WTS WTS WTS WTS TIGER SHARP WTS WTS WTS WTS SHARP SHARP TIGER SHARP SHARP

TIGER TIGER TIGER TIGER SHARP SHARP Kg LbSHARP Part# SHARP

OEM Size Part# OEM Size 1,3Kg FC200 WTS 1U-3202 OEM WTL 135-8208 Size 20 3 Lb Kg Lb Part# Kg Kg Lb Kg Lb Part# Part# Part# OEM OEM Size Size Size Size Kg KgLb Kg LbKg Lb Lb Part# Part# Part# OEM OEM OEM Size SizeSize Size Kg Lb Part# OEM Part# OEM 20,5 VTL TL,OEM 9W-8259 5545 45Lb 13,0 FC450 VTL1U-3552 1U-3452 TL, 7T-8459 29FC550 FC200 WTS1U-3302 1U-3202 WTL 135-820830 20 Size 3FC300 5,31,312 WTS WTL 135-9308 Kg Lb Part# OEM Size Kg Kg Lb Part# OEM Kg Lb Part# OEM Size Lb Part# OEM Size 13,0 FC450 VTL 1U-3452 TL, 7T-8459 45 29 1,331,3 FC200 WTS 1U-3202 WTL 135-8208 20 13,0 13,0 13,0 FC450 FC450 VTL VTL 1U-3452 VTL1U-3552 1U-3452 1U-3452 TL, 7T-8459 7T-8459 TL,9W-8259 TL, 7T-8459 7T-8459 45 4545 1,3 29 29FC450 34,0 107-8609 6055 7529 FC600 VTL 1,3 1,3 FC200 FC200 WTS WTS WTS 1U-3202 1U-3202 1U-3202 WTL WTL 135-8208 WTL 135-8208 135-8208 20 2020 33FC200 3 Part# 3FC200 13,0 FC450 VTL 1U-3452 TL, 45 29Lb 20,5 FC550 VTL TL, 45 WTS 1U-3202 WTL 135-8208 20 Kg Part# OEM Size Kg Lb OEM Size 5,3 FC300 WTS 1U-3302 WTL 135-9308 30 12 18 FC350 WTS 1U-3352 WTL 135-9337 35 8,0 20,5 FC550 VTL 1U-3552 TL, 9W-8259 55 45 13,0 FC450 VTL 1U-3452 TL, 7T-8459 45 29 13,0 FC450 VTL 1U-3452 TL, 7T-8459 45 29 1,3 FC200 WTS 1U-3202 WTL 135-8208 20 3 FC300 39,9 4T-4702 7060 FC700 VTL 20,5 20,5 20,5 FC550 FC550 VTL VTL 1U-3552 1U-3552 1U-3552 TL, 9W-8259 TL,TL, 9W-8259 9W-8259 55 5555 5,3 45 45FC550 1,3 FC200 WTS 1U-3202 WTLWTL 135-8208 20 3030 35,3 5,312 FC300 WTS 1U-3302 WTL 135-9308 30 12 20,5 FC550 VTL 1U-3552 TL, 9W-8259 55 458845 34,0 107-8609 75 FC600 VTL 5,3 FC300 FC300 WTS WTS WTS 1U-3302 1U-3302 1U-3302 WTL 135-9308 WTL 135-9308 135-9308 30 12 12FC350 12 5,3 WTS 1U-3302 WTL 135-9308 3045 13,0 FC450 1U-3452 TL,107-8609 7T-8459 45 6060 2975 34,0 107-8609 60 75 FC600 VTL 18 WTS 1U-3352 WTL 135-9337 1,38,028 FC200 1U-3202 135-8208 2035 3FC300 1U-3452 WTL 138-6458 FC450 WTS 20,5 FC550 1U-3552 TL, 9W-8259 45FC600 20,5 FC550 VTL 1U-3552 TL, 9W-8259 55 45 69,5 80 153 FC800 VTL 34,0 34,0 34,0 107-8609 107-8609 60 75 FC600 75 FC600 VTL VTL VTL 34,0 107-8609 60 75 FC600 39,9 4T-4702 70 55 12,5 88 FC700 5,3 FC300 WTS 1U-3302 WTL 135-9308 30 12 5,3 FC300 WTS 1U-3302 WTLWTL 135-9308 30 3535 128,0 18 FC350 WTS 1U-3352 WTL 135-9337 8,018 18 FC350 18FC450 18 FC350 FC350 WTS WTS WTS 1U-3352 1U-3352 1U-3352 WTL 135-9337 WTL 135-9337 135-9337 35 8,0 8,0 20,5 FC550 1U-3552 TL, 9W-8259 70 55 7070 4588 39,9 4T-4702 70 88 FC700 VTL VTL WTS 1U-3352 WTL 135-9337 3535 34,0 107-8609 75FC700 FC600 34,0 60 75 FC600 VTL 1U-3452 WTL 138-6458 28 WTS 45 12,5 39,9 39,9 39,9 4T-4702 4T-4702 4T-4702 88 FC700 88 FC700 VTL 5,3 FC300 WTS 1U-3302 WTL 135-9308 30 12FC350 39,9 4T-4702 70 88 FC700 69,5 80 60 8,0 153 FC800 VTL 107-8609 18 FC350 WTS 1U-3352 WTL 135-9337 35 8,0 18 FC350 WTS 1U-3352 WTL 135-9337 35 8,0 1U-3452 WTL 138-6458 28 FC450 WTS 45 12,5 34,0 107-8609 60Size 75 FC600 69,5 80 153 FC800 VTL Kg Kg Kg Lb Lb Lb Part# Part# Part# OEM OEM OEM 80 Size Kg Kg Lb Kg Lb Lb Part# Part# Part# OEM OEM OEM Size Size 39,9 4T-4702 70 12,5 88FC800 FC700 1U-3452 1U-3452 1U-3452 WTL WTL 138-6458 WTL 138-6458 138-6458 28 FC450 2828 FC450 FC450 WTS WTS WTS 45 45Size 45 12,5 12,5 12,5 39,9 70 88 FC700 VTL 1U-3452 WTL 138-6458 28 FC450 WTS 45 69,5 69,5 69,5 80 80Size 80 153 153 FC800 153 FC800 VTL VTL VTL 4T-4702 69,5 153 FC800 Kg Lb Part# OEM Size Kg Lb Part# OEM Size 18 FC350 WTS 1U-3352 WTL 135-9337 35 8,0 39,9153 70 80 12,5 2812,5 88FC800 FC700 VTL VTL 4T-4702 1U-3452 WTL 138-6458 28 FC450 1U-3452 WTL 138-6458 FC450 WTS WTS 45 45 69,5 153 FC800 69,5 80 VTL 13,0 13,0 13,0 FC450 FC450 VTL VTL VTL 1U-3452 1U-3452 1U-3452 TL, 7T-8459 TL, 7T-8459 7T-8459 454545 12,5 29 29 1,31,3 FC200 WTS WTS WTS 1U-3202 1U-3202 1U-3202 WTL WTL 135-8208 WTL 135-8208 135-8208 3 FC200 3 FC200 13,0 FC450 VTL 1U-3452 TL,TL, 7T-8459 45 2929FC450 1U-3452 WTL 138-6458 28 FC450 WTS 45 1,3 FC200 WTS 1U-3202 WTL 135-8208 20202020 331,3 69,5 80 153 FC800 VTL 20,5 20,5 20,5 FC550 FC550 VTL VTL VTL 1U-3552 1U-3552 1U-3552 TL, 9W-8259 TL, 9W-8259 9W-8259 555555 45 45 20,5 FC550 VTL 1U-3552 TL,TL, 9W-8259 55 4545FC550 5,3 5,3 5,3 FC300 FC300 FC300 WTS WTS WTS 1U-3302 1U-3302 1U-3302 WTL WTL 135-9308 WTL 135-9308 135-9308 12 12 12 5,3 12 FC300 WTS 1U-3302 WTL 135-9308 30303030 34,0 34,0 34,0 107-8609 107-8609 60 606060 75 75 FC600 FC600 VTL VTL VTL 107-8609 34,0 107-8609 7575FC600 FC600 VTL 18 18 FC350 18 FC350 FC350 WTS WTS WTS 1U-3352 1U-3352 1U-3352 WTL WTL 135-9337 WTL 135-9337 135-9337 8,08,0 8,0 18 FC350 WTS 1U-3352 WTL 135-9337 35353535 39,9 39,9 39,9 4T-4702 4T-4702 70 707070 8,0 88 88 FC700 FC700 VTL VTL VTL 4T-4702 39,9 4T-4702 8888FC700 FC700 VTL

LOADER LOADER LOADER LOADER LOADER LOADER LOADER LOADER RPL RPRP RPHD LOADER RPL RPHD ROCK ROCK ROCK TANNPROFILER FOR HJULLASTERE RPL RP RPHD RP RPL RPL RPL RP RP RP RPHD RPHD RPHD PENETRATION PENEPENET. ROCK ROCK ROCK ROCK ROCK ROCK RPL RP RPHD RPL RP RPHD ROCK ROCK ROCK LIGHT TRATION HD PENETRATION PENEPENET. ROCK ROCK ROCK ROCK ROCK ROCK ROCK ROCK ROCK RPL RP RPHD LOADER LOADER LOADER PENETRATION PENEPENET. ROCK ROCK ROCK ROCK ROCK ROCK PENETRATION PENEPENET. LIGHT TRATION HD PENETRATION PENETRATION PENETRATION PENEPENEPENEPENET. PENET. PENET. ROCK ROCK ROCK

12 1212 12

RCRCRC GNGN DESI DESI DESI GNGN DESI NEW NEW NEW ONE RC+RE INTO GN DESI DESI ONE ONE ONE INTO INTO INTO RERERE RCGNGN RC+ RC+ RC+ GNDESI DESI NEW RC+RE INTO ONE DESIGN

PP PPPPPP RPHD P PPP P

TRATION PENET. PENET. PENEHD HD TRATION PENEPENEPENETRATION TRATION TRATION PENETRATION

OEM Size EM Size 25 2253RP RP 25 253 30 2303RP RP 30 303 35 2353RP RP 35 353 40 403 RP 40 03 RP 1453 RP 45 453 RP 45 1553 RP 55 553 RP 55 -2553 2553 603 RP 60 03 RP 60 4703 RP 70 703 RP 70 80 -8803 80 8803

Kg Lb Part# OEM Size Part# RC Kg OEMSize20 1,5 Lb3 FC200 4,0 39 FC200 FC250RC RC 1,5 - 2025 4,0 6,0 913FC250 FC300RC RC 1U-3302-RC 125-83092530 6,0 125-8309 8,7 1319FC300 FC350RC RC1U-3302 1U-3352RCRC 119-93593035 8,7 11,6 1926FC350 FC400RC RC1U-3352 7T-3402RCRC119-9359 124-74093540 11,6 RCRC 124-7409 15,7 2635FC400 FC450RC RC7T-3402 1U-3452 116-74594045 15,7 RCRC 116-7459 26,0 3557FC450 FC550RC RC1U-3452 1U-3552 113-05594555 26,0 42,8 5794FC550 FC600RC RC1U-3552 6I-6602RCRC113-0559 119-96095560 42,8 94 RC 119-9609 6070 53,0 117FC600 FC700RC RC 6I-66024T-4702 RC SYL 53,0 4T-4702- RC 7080 82,5117 182FC700 FC800RC RC 82,5 182 FC800 RC 80 SYMMETRIC SYMMETRIC SYMMETRIC SYMMETRIC

69,5 69,5 69,5 153 153 FC800 153 FC800 FC800 VTL VTL VTL 69,5 153 FC800 VTL

RPHD RPHD RPHD RPHD

Part# OEM Size Part# Kg Lb OEM Size FC400 RPHD 135-9400 40 Part# 19,3 42 Kg Lb OEM Size Part# Kg Lb OEM Size Part# Part# Part# Kg 19,3 KgKg Lb Lb OEM OEM Size40 Size Size RPHD OEM 42Lb FC400 135-9400 RPHD 40 Part#135-9400 19,3 135-9400 Part# FC450 45 Size LbFC400 Kg Lb42 OEM Size 27,9 61 138-6451 Part# Kg Kg Lb FC400 OEMOEM Size RPHD 40 19,3 42 FC400 FC400 FC400 RPHD RPHD RPHD 40 40 40 19,319,3 19,3 42 42 42 135-9400 135-9400 135-9400 FC450 RPHD 45 27,9 61 138-6451 FC400 RPHD FC400 RPHD 40 FC450 RPHD 45 42 135-9400 19,3 42 135-9400 27,9 61 138-6451 FC400 40 FC550 55 40 19,319,3 42 135-9400 33,4 73 FC450 138-6552 RPHD 45 27,9 61 138-6451 FC450 FC450 FC450 RPHD RPHD RPHD 45 45 27,927,9 27,9 61 61 61 138-6451 138-6451 138-6451 33,4 73 FC550 RPHD 138-6552 55 45 FC550 55 FC450 RPHD FC450 RPHD 45 33,4 73 138-6552 61 138-6451 FC450 RPHD 45 27,9 61 138-6451 FC600 60 45 27,9 61 138-6451 60,5 133 135-9600 Part# Kg27,9 Lb FC550 OEM Size RPHD 55 33,4 73 138-6552 Part# Part# Part# Kg Kg Kg Lb LbFC550 Lb FC550 OEM OEM OEM Size Size FC550 RPHD RPHD RPHD 55 55Size 55 33,433,4 33,4 73 73 73 138-6552 138-6552 138-6552 FC600 RPHD 60 60,5 133 135-9600 FC600 RPHD 60 60,5 133 135-9600 FC550 RPHD FC550 55 FC550 RPHD 55 70 FC700 33,4 73 138-6552 33,4 73 138-6552 FC400 RPHD 40 55 33,4 73 138-6552 75,4 166 135-9700 19,3 42 135-9400 RPHD 60 60,5 133 135-9600 FC400 FC400 FC400 RPHD RPHD RPHD 404040 19,3 19,3 19,3 4242FC600 42 135-9400 135-9400 135-9400 FC600 FC600 FC600 RPHD RPHD RPHD 60 70 6060 60,560,5 60,5 133133 133 135-9600 135-9600 135-9600 FC700 RPHD 75,4 166 135-9700 70 FC700 RPHD 75,4 166 135-9700 FC600 60 80 FC800 FC600 RPHD 60,5 133 135-9600 FC450 RPHD 45 60 FC600 RPHD 60 135-9800 120,5 265 135-9600 27,960,5 61 133 138-6451 60,5 133 135-9600 70 RPHD 75,4 166 135-9700 FC450 FC450 FC450 RPHD RPHD RPHD 454545 27,9 27,9 27,9 6161FC700 61 138-6451 138-6451 138-6451 70 80 7070 FC700 FC700 FC700 RPHD RPHD RPHD 75,4120,5 75,4 75,4 166166 166 135-9700 135-9700 135-9700 FC800 RPHD 135-9800 265 80 FC800 RPHD 135-9800 120,5 265 70 FC700 75,4 166 135-9700 FC550 RPHD 55 70 FC700 RPHD 33,475,4 73 166 138-6552 70 FC700 RPHD 135-9700 75,4 166 135-9700 80 RPHD 135-9800 120,5 265 FC550 FC550 FC550 RPHD RPHD RPHD 555555 33,4 33,4 33,4 7373FC800 73 138-6552 138-6552 138-6552 80 8080 FC800 FC800 FC800 RPHD RPHD RPHD 135-9800 135-9800 135-9800 120,5 120,5 120,5 265265 265 80 FC800 RPHD 135-9800 120,5 265 FC600 RPHD 60 80 60,5 133265 135-9600 FC800 RPHD 80 FC800 RPHD 135-9800 120,5 135-9800 120,5 265 FC600 FC600 FC600 RPHD RPHD RPHD 606060 60,5 60,5 60,5 133 133 133 135-9600 135-9600 135-9600 75,4 166 FC700 RPHD 135-9700 70 707070 FC700 FC700 FC700 RPHD RPHD RPHD 75,4 75,4 75,4 166 166 166 135-9700 135-9700 135-9700 120,5 265 FC800 RPHD 135-9800 80 808080 FC800 FC800 FC800 RPHD RPHD RPHD 135-9800 135-9800 135-9800 120,5 120,5 120,5 265 265 265

HD HD HD

PHC 700HB PHC 700HB PHC 700HB PHC PHC PHC 700HB 700HB 700HB PHC 700HB PHC 700HB PHC 700HB WHITE WHITE WHITE IRON IRON IRON CORE CORE CORE WHITE IRON CORE PHC 700HB PHC PHC 700HB 700HB 700HB

1U-3452 1U-3452 1U-3452 WTL WTL 138-6458 WTL 138-6458 138-6458 28 28 FC450 28 FC450 FC450 WTS WTS WTS 454545 12,5 12,5 12,5 28 FC450 12,5 808080 WHITE IRONWTS 1U-3452 WTL 138-6458 45

RPHD HDPENET. HD PENET. HD HD HD PENET. HD HDHD PENETROCK ROCK TRATION ROCK ROCK ROCK PENET. PENET. PENET. PENET. HD Kg Lb HD

WHITE IRON CORE WHITE IRON CORE WHITE IRON CORE WHITE IRON CORE WHITE WHITE WHITE IRON IRON IRON CORE CORE CORE WHITE CORE WHITE IRONIRON CORE PHC 700HB WHITE IRON CORE

WEARWHITE IRON WHITEIRON IRON WHITE RESISTANT WEARWHITE WHITE WHITE IRON IRON IRON WEARWHITE WHITE IRONIRON WEARINSERT RESISTANT WEARWEARWEARWHITE IRON RESISTANT RESISTANT WEARWEARINSERT RESISTANT RESISTANT RESISTANT WEARINSERT INSERT RESISTANT RESISTANT INSERT INSERT INSERT RESISTANT INSERT INSERT INSERT WHITE IRON WHITE WHITE WHITE IRON IRON IRON WEARWEARWEARWEAR- Part# Kg Lb OEM Size RESISTANT RESISTANT RESISTANT RESISTANTPart# Kg 29Lb FC450 OEM 45 Size PHC 13,2 9W-8459 INSERT Part# Kg Lb OEM Size INSERT INSERT INSERT Part# Kg Lb Size PHC OEM 45 Size 13,2 9W-8459 29LbLb FC450 Part# Part# Part# Kg Kg Lb Kg OEM OEM OEM Size Original solution: FC450PHC PHC 45 Size 13,229 9W-8459OEM 29 Part#Part#9W-8459 Kg FC450 Lb Part# 13,2 Kg Lb OEM 45 Size Size Kg13,2 Lb OEM Size FC450 FC450 FC450 PHC PHC 45 4545 13,2 13,2 9W-8459 9W-8459 9W-8459 29 29 29 the PHC features a PHC Original solution: Original solution: FC450 FC450 PHC 45 45 13,2 9W-8459 29 13,2 9W-8459 FC450 PHC 45 9W-8459 29 Original solution: Chrome White Iron the PHC features a PHC Original Original Original solution: solution: solution: the PHC features a the PHC features aIron wear-resistant insert Chrome White Original solution: Original solution: solution: the the PHC the PHC PHC features features features a a a Chrome White Iron Chrome Iron Part# for extreme Kg LbWhite Size wear-resistant insert the PHC features a OEM the features aIron PHC features aPart# Part# Part# Kg Kg Kg LbLb LbWhite OEM OEM OEM Size Size Size Chrome Chrome Chrome White White Iron Iron wear-resistant insert wear-resistant insert penetration forChrome extreme FC450 PHC 13,2 9W-8459 45454545 29 White White Iron Iron Chrome White Iron wear-resistant wear-resistant wear-resistant insert insert insert for extreme FC450 FC450 FC450 PHC PHC PHC 13,2 13,2 13,2 9W-8459 9W-8459 9W-8459 29 29 29 for extreme penetration wear-resistant insert wear-resistant wear-resistant insertinsert penetration for for extreme for extreme extreme Original solution: penetration Original Original Original solution: solution: solution: extreme for extreme for extreme penetration penetration thepenetration PHC features a 700HB the the the PHC PHC PHC features features features aaa penetration penetration penetration Chrome White Iron 700HB Chrome Chrome Chrome White White White Iron Iron Iron 700HB wear-resistant insert 700HB wear-resistant wear-resistant wear-resistant insert insert insert 700HB 700HB 700HB for extreme 700HB forfor extreme for extreme extreme 700HB 700HB penetration penetration penetration penetration 700HB 700HB 700HB 700HB

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

OtherOther manufacturer's Other manufacturer's manufacturer's names, names, descriptions, names, descriptions, descriptions, pictures pictures and pictures part and numbers part and numbers part are numbers used are for used are reference used for reference foronly. purposes reference purposes only. purposes only. only.

Other manufacturer's names, descriptions, pictures and part numbers are for reference purposes Other manufacturer's names, descriptions, pictures and partused numbers are used for reference purposes only.

Other manufacturer's names, descriptions, and part used for reference purposes only.

Other manufacturer's names, descriptions, pictures and part are used for reference purposes only.

Other manufacturer's names, descriptions, pictures andpictures part numbers arenumbers usednumbers forare reference purposes only.

Other manufacturer's names,pictures descriptions, pictures and are partused numbers are usedpurposes for reference Other manufacturer's names, descriptions, and part numbers for reference only.purposes only.

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

Other manufacturer's names, descriptions, and part numbers used for reference purposes only.

Other manufacturer's names, descriptions, pictures andpictures part numbers are used for are reference purposes only.

Size

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

M

OEM Size TL 135-8208 20 WTL 135-820825 20 TL 135-8258

FUTURA FC2 For å motvirke slark mellom tenner og adaptere, har vi utviklet vårt eget tannsystem som vi kaller for FC2.

Det som skiller FC2 tannsystemet fra det vanlige CAT-J tannsystemet er nesen på adapterne. Vi har laget en bølgete nese på adapterne istedenfor den rette nesen man finner i CAT-J adaptere.

Standard CAT-J tenner vil derfor ikke passe på FC2 adaptere. Men våre FC2 tenner vil passe både på FC2 og CAT-J adaptere.

J JSERIES JSERIES SERIES

ONEONE TOOTH TOOTH FITSFITS TWOTWO SYSTEMS: SYSTEMS: J SERIES J SERIES ANDAND FC2 FC2

3332 BEN

I T I TI T E FE FE F

BEN BEN BEN

BEN

1

IT EF

EF

IT

ONE TOOTH FITS HAMMERLESS TWO SYSTEMS: AND SAFE HAMMERLESS HAMMERLESS HAMMERLESS OUTSTANDING OUTSTANDING OUTSTANDING T T T T I I I I J SERIES AND FC2 F F F F SYSTEM låsemekanisme

HAMMERLESS HAMMERLESS ANDAND SAFESAFE SYSTEM SYSTEM

OUT QUA UNB

33 BEN

E E AND QUALITY QUALITY QUALITY AND AND Utmerket UNBEATABLE UNBEATABLE UNBEATABLE PRICE PRICE PRICE 3 BEN

22

E SAFE ESAFE AND AND AND SAFE Slagfri og sikker SYSTEM SYSTEM SYSTEM 2 BEN

BEN

11

2 adapere: CAT-J og FC2

BEN BEN BEN

BEN BEN BEN BEN

ONE ONE ONE TOOTH TOOTH TOOTH FITS FITS FITS FIT E FIT E TWO TWO TWO SYSTEMS: SYSTEMS: SYSTEMS: Samme tann passer på J SERIES J JSERIES AND AND AND FC2 FC2 FC2 1SERIES

222

I T I TI T E FE FE F

BEN

111

I T I TI T E FE FE F

J SERIES kvalitet

OUTSTANDING OUTSTANDING QUALITY QUALITY ANDAND UNBEATABLE UNBEATABLE PRICE PRICE

J SERIES J SERIES

Steel solutions for tough conditions

9

EXCAVATOR teeth LAR RC ULOADER teeth R teeth CATETRRPEIL EXCAVATOR teeth VATOR teeth EXCAVATOR E C A L P C E IR D S Improved penetration means Improved less ENT PARTpenetration Mless penetration penetration means Reinforced lateral sved extend Improved means less SY SYL fuel consumption EXCAVATOR teeth consumption onsumption wear life and perfo mance ER teeth FC2 EXCAVATOR teethconsumption LOADERfuel teeth fuel TENNER penetration mea Evolution rced lateral ribs extend Improved penetration means less Reinforced lateral Improved ribs extend fuel consumptionteeth OR LOADER fe andteeth performancefuel consumption wear life and performance y = double saving Double compatibility = double saving WTS enetration means less SYL later SYL WTSReinforced RC U U U L URPLRCRPL wear RP mptionRCL RC U life and pe Perfect fit with J Series adapters

Internal geometry of the FC2 proprietary tooth box

25,4 56 FC2-550 RC 113-0559 41,9 92 FC2-600 RC 119-9609

nose-tooth fitting

ONE FC2 TOOTH WILL FIT ON 2 SYSTEMS:

LContact and FC2.

Contactfaces JSERIES Contact Try the new system on your faces J SERIES faces adapters.

U

Kg

3,1 4,2 6,0 general applications.

10,9 UNIVERSAL Suitable for excavators Part# Kg Lb OEM Size DESIGN 3,1 7 FC2-250 U 1U-325221,6 25 and General duty tip. loaders 4,2 9 FC2-300 U 1U-3302 30 35,6 Recommended for 6,0 13 FC2-350 U 1U-3352 35

11,2 25 FC2-400 RC 124-7409 40 design allows JSERIES and for FC2.

JSERIES and FC2.

JSERIES and FC2.

15,6 34 FC2-450 RCAR 116-7459 45 CHISEL maximum penetration Part# Size Kg LL Lb OEM Try the new system onROCK your RPI TEyour DESIGN CAFC2-550 E-RC 1U-3252 RC 55 4,0 PL 9RC FC2-250 25 AC113-0559 25,4 56 Try the new system Tryon theyour new system RE RECT DIon J SERIES adapters. Ideal tip for densely 5,8 13 FC2-300 RC 125-8309 30 RTS119-9609 60 ENT8,6PA19RC 41,9 materials, 92 MFC2-600 compacted FC2-350 RC 119-9359 35 J SERIES adapters.

J SERIES adapters.

Stock savings 11,2 25 FC2-400 RC 124-7409 40 design allows for Stock savings Stock savings maximum penetration 15,6 34 FC2-450 RC 116-7459 45 The FC2 range features a 4 nerve

The FC2 range features a 4 nerve nose-tooth fitting

J SERIES

nose-tooth fitting nose-tooth fitting UNIVERSAL Part# Size Kg Lb OEM DESIGN DESIGN 4,0 9 FC2-250 RC 1U-3252 RC 25 ONEtipFC2 TOOTH for ONE densely General duty tip.

5,8 13 FC2-300 RC 125-8309 30 ONE Ideal FC2 TOOTH FC2 TOOTH WILL FIT materials, ON 2 SYSTEMS: 19 FC2-350 RC 119-9359 35 Recommended for WILLcompacted FIT ON 2 WILL SYSTEMS: FIT ON8,62 SYSTEMS: tary tooth boxCHISEL tary tooth box ROCK

RPL RPL RPL RPL RPL RPL RPL

Size

35,6 78

SYL

The FC2 tooth willThe fit on FC2 FC2 tooth will fit on FC2 adapters and on JSERIES adapters and on JSERIES adapters and on JSERIES 1x21x2 1x2J SERIES J-SYSTEM ADAPTERS. DESIGN

DESIGN

FC2-250 U FC2-300 U FC2-350 U FC2-450 U RO FC2-550PEN U LIG FC2-600Rec U

gen load

FC2-600 U

6I-6602

60

N

RC

TOOTH COMPATIBILITY LOCKING TOOTH COMPATIBILITY TOOTH COMPATIBILITY LOCKING OPTIONSLOCKING ROCK CHISEL SYMMETRIC TWIN TIGER OPTIONS The FC2Part# toothOEM will Size fit on FC2 ROCKKg OPTIONS UNIVERSAL Lb OEMLb SizePart# Part# Size Kg OEM Kg Lb DESIGN

ROCKLONG CHISEL DESIGN Kg LbKg Lb Part# Part#OEM OEM Size Size DESIGN General duty tip. 4,0 92,1FC2-250 RC 1U-3252 25 5 FC2-220 L RC 6Y-3222 22 Ideal tip for densely for Recommended TOOTH 5,8 13COMPATIBILITY RC 125-8309 30 3,4FC2-300 7 FC2-250 L 1U-3252 25

Part#

7 9 13 24 48 78

general applications.

10,9 24 FC2-450 U 9W-8452 45 Suitable for excavators 21,6 48 FC2-550 U 9W-8552 55 and loaders

55 60

SYMM SYMMETR DESI DESIGN

Stock savings

Contact faces # OEM

Lb

DESIGN

PENETRATION

Names, descriptions, illustrations and part numbers of other manufacturers are used within this document as a reference.

Double compatibility = double saving

Self s Self sharpen Tip wi Tip with 30%m UNIVERSAL Size Kg Lb LONG Kg DESIGN Lb Part#Part# OEM Kg OEM wear Lb SizePart# DESIGN OEM Size 4,0 9 FC2-250 RC 1U-3252 RC 25 General tip. WTS 135-9308 5,28 duty 12 FC2-300 2,1 5 30 FC2-220 Lwear 6Y-3222materia 22 General duty tip.

5,8 13 FC2-300 RC 125-8309 30

5,5 12 FC2-300 SYL 183-5300 30 3,9 9 FC2-250 RPL Ideal 9N-4252 25 densely 3,1 7 FC2-250 U 1U-3252 25 tip for LIGHT DESIGN Self sharpening design.

Design with General duty tip.

Recommended for WTS 135-9357 LOCKING 7,0 15 FC2-350 SYL 168-1359 35 7,0 15 FC2-350 6,3 14 FC2-300 RPL compacted 9N-4302 30materials, 3,4 35 7 35 FC2-250 L Recommended 1U-3252 25 for 4,2 9 FC2-300 U 1U-3302 30 8,6 19 FC2-350 RC 119-9359 Tip with 30% more Recommended for double tip compacted materials, OPTIONS 8,6 194,7FC2-350 RC 119-9359 35 Recommended for general applications. general applications.

13,7 30 FC2-450 SYL 159-0459 45 27 FC2-450 WTS 138-6458 10willFC2-300 L 1U-3302 30 8,6 19 FC2-350 RPL design 9N-4352allows 35 for 4,7 40 10 45 FC2-300 L general 1U-3302 30 RO 6,0 13 FC2-350 U 1U-3352 35 11,2 12,4 25 FC2-400 RC 124-7409 applications The FC2 tooth fi t on FC2 wear material 11,2 25 FC2-400 RC 124-7409 40 designSuitable allows for general duty and general applications. for Suitable for 15,6 34 FC2-450 RC 116-7459 45 6,9 15 FC2-350 L 1U-3352 35 12,1 27 FC2-400 RPL 8E-4402 40 6,9 15 FC2-350 L 1U-3352for35 10,9 24 FC2-450 U 9W-8452 45 maximum penetration PEN Suitable excavato Internal geometry of the FC2 proprieThe FC2 range loader features a 4 nerve on JSERIES fit with adapters 15,6 34 and FC2-450 RCPerfect 116-7459 45 J SeriesSuitable penetration adapters applications. excavators excavators excavators and RC 113-0559 56 FC2-550 55 Part# Size Lb25,4 OEM 18 FC2-400 L 7T-3402 40 17,5 39 FC2-450 18 Kg FC2-400 L and 7T-3402 40 HD Size nose-tooth Kg 45Lb Kg Part# OEM 8,4 Size Size 21,6 box 48 FC2-550 U 9W-8552 55 OEM maximum Kg forLb OEM loaders Part# Kg Lband ADAPTERS. taryPart# tooth Kg Lb fitting Part# OEM Lb Size RPL 9N-4452 Part# 25,4 568,4FC2-550 RC OEM 113-0559 55Size J-SYSTEM and loaders loaders loaders 41,9 92 FC2-600 RC 119-9609 13,1 29 FC2-450 L 9W-8452 23 51 FC2-550 RPL 9N-4552 55 13,1 60 29 FC2-450 L 9W-8452 45 Rec 35,6 78 FC2-600 U 6I-6602 60 41,9 92 FC2-600 RC will 119-9609 The JSERIES TOOTH not fit 60 45 4,0 609 3,9 FC2-250 RC 1U-3252 1U-3252 RC 25 2,1 5 on 9 FC2-250 RPL RC 9N-4252 25 19,9 L 44 FC2-550 L 9W-8552 40,1 88 FC2-600 19,925 445,28 FC2-550 L 9W-8552 55 WT 3,1 7 FC2-250 U 1U-3252 25 FC2-220 6Y-3222 2255 5,5 12 FC2-300 SYL 183-5300 30 RPL 7Y-0602 12 FC2-300 FC2 adapters for h EXCAVATOR ONE FC2 TOOTH 29,9 66 FC2-600 L 6I-6602 60 66 FC2-600 L 6I-6602 60 load 5,8 13 FC2-300 RC 125-830929,930 125-8309 30 ADAPTER

9N-4252 9N-4302 9N-4352 8E-4402 9N-4452 9N-4552 7Y-0602

1x2

25 30 35 40 45 55 60

U SYL

J-SYSTEM

ADAPTERS. J-SYSTEM

ADAPTERS.

RPL

ROCK CHISEL

The JSERIES TOOTH will not fit ROCK UNIVERSAL SYMMETRIC TWIN TIGER DESIGN t# The JSERIES TOOTH Thewill JSERIES not fit TOOTH will not fit DESIGN PENETRATION DESIGN on FC2 adapters DESIGN DESIGN !

0l duty RC tip.

ROCK CHISEL NEW LIGHT DESIGN on FC2 adapters FC2 adapters UNIVERSAL Part# Part# Kg Lb OEM onSize Kg Lb OEM Size ROCK CHISEL Ideal tip for densely Kg UNIVERSAL General tip. 25Kg Lb 4,2 Part# SelfFITsharpening design.

0 RC LOCKING mended for Size7,0 Size OEM Lb Design 6,3Part# 14with FC2-300OEM RPL 9N-4302 WILL ON DESIGN 9 FC2-300 U 2 SYSTEMS: 1U-3302 30 3,4 7 FC2-250 L duty 1U-3252 DESIGN 7,0 15 FC2-350 SYL 168-1359 35 1x1 4,0 9 FC2-250 RC 1U-3252 RC 25 compacted materials, FC2-250 URC 1U-3252 25 FC2-350 119-9359 35 RC OPTIONS 119-9359 35 DESIGNRecommended for Recommended3,1 for8,67 19double DESIGN Tip with 30% more 35 tip l0applications.

JSERIES andUFC2.

LH 9N-4352 RH12,4 8,6 19 FC2-350 RPL 6,0 13 FC2-350 1U-3352 4,7 10tipFC2-300 L 1U-3302 30 LOADER LOADER 13,7 30 FC2-450 SYL 159-0459 45 4,0 9 FC2-250 RC 1U-3252 RC 25 J-SYSTEM 3,1 7 FC2-250 U 1U-3252 25 J-SYSTEM Ideal for densely the new system on your 30 General dutygeneral tip. for 5,8 13 FC2-300 Try RC 125-8309 25 FC2-400 124-7409 40 design allows duty and general applications.

ADAPTER ADAPTER wear material Part# Size e0 RC for 124-7409 40 Kg9 Lb FC2-300 OEM 30 4,2 11,2 URC 1U-3302 Ideal tip for densely 12,1 27 FC2-400 RPL 8E-4402 JRC SERIES adapters.

General duty tip.

10,9 24 FC2-450 U 9W-8452 45 6,9 15 FC2-350 L 1U-3352 35 J-SYSTEM 5,8 13 FC2-300 125-8309 30 J-SYSTEM FC2-450 RC 1U-3302 116-7459 4,2 15,6 9 34 3022 3,1 7 FC2-300 25 0,98"U FC2-220 6Y-322445 0 RC and 116-7459 of 45the compacted materials, maximum penetration 8,6 range 19 FC2-350 RC savings 119-9359 35 Recommended for applications. ernal geometry FC2 proprieloader Suitable for excavators Stock The FC2 features a 4 nerve tors J-SYSTEM J-SYSTEM VECTOR LONG 6,0 13 FC2-350 U 1U-3352 35 J-SYSTEM J-SYSTEM 4,6 10 25 0,98" FC2-250-25 6Y-3254 25 Part# Size Kg Lb OEM 17,5 39 FC2-450 RPL 9N-4452 compacted materials, 48 FC2-550 U 9W-8552 8,6 19 FC2-350 RC 35 18 FC2-400 L 7T-3402 40 for 56FC2-350 FC2-550 RC 1U-3352 113-0559 55 RC 113-0559 55 8,4 fitting 11,2 2521,6 FC2-400 RC 119-9359 124-7409 40 55 DESIGN Recommended design allows for nose-tooth 4,5 30 1,18"U FC2-250 119-3253 6,0 25,4 13 10 3525 and loaders box general13applications.

29 FC2-450 VTL 7T-8459 45 sy0tooth 23 51 FC2-550 RPL 3G-6304 9N-4552 Self-sharpening 10,9 24 FC2-450 U 9W-8452 45 25 FC2-400 RC 124-7409 40 8,0 18 30-32 1,2-1,3” FC2-300 30 design 41,9 92 FC2-600 RC 119-9609 60 35,6 78 FC2-600 U 6I-6602 60 29 allows FC2-450 for L 9W-8452 11,2 45 0 RC 119-9609 6013,1 20,8 46 FC2-550 VTL 9W-8259 55 general applications.

15,6 34 FC2-450 RC 116-7459 45 maximum penetration vector long design Suitable33 for excavators 35 1,4”U FC2-300-35 8E-94904530 10,9 7,9 24 17 FC2-450 9W-8452 73 FC2-600 VTL 107-8609 60 Contact 15,6 40,1 88 FC2-600 RPL 6I-6354 7Y-0602 19,9 44 FC2-550 L 9W-8552 55 maximum penetration 21,6 10,1 48 22 FC2-550 U 9W-8552 5535 40 1,57” FC2-350 99 FC2-700 VTL 4T-4702 70 Suitable45 for excavators faces 25,4 34 56 FC2-450 FC2-550 RC RC 116-7459 113-0559 45 55

VTL

1x11x1 1x1 WTS

SYL

Names, descriptions, illustrations and part numbers of other manufacturers are used within this document as a reference.

RPHD

Hammerless, quick and safe system

NEW!

VTL Hammerless, quick and safe system Hammerless, Hammerless, quick and quick safe and system safe system SYL WTS

VTLV

UNIVE DESIG

WTS

Genera 30 15 FC2-350 WT Recom 35 27 FC2-450 WT genera 40 Suitabl 45 and loa 55 VECT 60

m

OPTIONAL WEAR CAPS

VTL

SYL

Names, descriptions, illustrations and part numbers of other manufacturers are used within this document as a reference.

VECTOR SYMMETRIC TWIN TIGER LO EXCLUSIVE and loaders Kg ULb FC2-350-B35 OEM Part# Size 35 SYMMETRIC TWIN TIGER 10,1 40 1,57” 3G-835455 21,6 48 22EXCAVATOR FC2-550 9W-8552 Kg Lb OEM Size KgWITH Lb OEM Size25,4 56 Part# FC2-550 113-0559 55 DESIGN DESIGN DESI NEW!and Kg Lb TOOTH Part#DESIGN Size 29,9 66 PIN FC2-600 LPart# 6I-6602 60 E FC2 DESIGN loaders 15,3 45 1,77” FC2-400 6I-640460 35,6 78 34 FC2-600 6I-6602 5,5 U 12 FC2-300 SYL 183-5300 30 40 41,9 92 FC2-600 RC RC 5,28 119-9609 60 DESIGN TWO 12 FC2-300 WTS 135-9308 30 5,5 LOCKING 12 FC2-300 SYL 183-5300 30 0,10 0,2 FC220HL2 22 Self sharpening design.

Design with ROCK UNIVERSAL ADAPTER TOOTH COMPATIBILITY LOCKING 20,6 45 50 1,97" FC2-450 6I-6464 45 7,0 15 FC2-350 SYL 168-1359 35 35,6 78 FC2-600 U 6I-6602 60 41,9 92 FC2-600 RC 119-9609 60 Self sharpening design.

Design with Part# SizeSelf-s Kg Lb OEM Part# Lb OEM LLSize FIT ONFC250HL2 2TipSYSTEMS: OPTIONS 7,0 15 FC2-350 WTSSize 135-9357 35 7,0 15 FC2-350 SYL 168-1359 35 Kg Tip with double tip 0,12 0,3 25 more OPTIONS 35,330% 78more FC2-550 6I-6554 45 13,7 30 FC2-450 SYL 159-0459 with 30% double tip Self-sharpen The FC2 tooth will fit on FC2 12,4 27 FC2-450 WTS 138-6458 45 13,7 30 FC2-450 SYL 159-0459 45 PENETRATION material 0,3 Size FC300HL2 30 Lb ROCK 33,2 Size 73 60 2,36”Lb FC2-550 LH 6I-6556 55 rt# 0,15 OEM Part# wear OEM Part# Part# Kg Lb KgDESIGN OEMHEX KEYSize Kg OEM wear material C 0,29 25 and 3,935,3 978 FC2-250 RPL 9N-4252 25Sizevector and on JSERIES 25 1x2 3,1 7 FC2-250adapters U 1U-3252 PENETRATION 0,6 FC350HL2 35 vector long 33,2 73 FC2-550 RH FC2-550 6I-6555S LH d FC2-550 S 107-3554 3G-9494 107-3554 3G-9494 R 0RIES RPHD 7T-8459 70FC2. 35,3 78 74,5 DESIGN 163 FC2-700 RPHD 7T-8459 70 LIGHT J-SYSTEM ADAPTERS. HD 0,38 0,8 FC400HL2 40 73 60 2,36” 2,36” FC2-550 33,2 FC2-550 tip.

S LHS 107-3556 3G-9496 55 33,2 73 60FC2-600 S LHS 107-3556 3G-9496 55 62,1 137 6I-6604 General duty 30 J-SYSTEM 6,3 14 FC2-300 RPL 9N-4302 The JSERIES TOOTH will not fi t 9 FC2-300 UEXCLUSIVE 1U-3302 30 the0,48new on45 73 your FC2-550 S RHS 107-3555 3G-9495 4,2 33,2 S RHS 60 107-3555 3G-949530 ER 57,6 127 75 3” 73 FC2-600 LH FC2-550 6I-6606 1,1 system FC450HL2 33,2 Recommended Part# Lb145 FC2-600 RH FC2-600 on FC2 adapters 65,8 145 FC2-600 S for 119-8604 119-8604 EXCLUSIVE  EXCLUSIVE 35 1,4 for57,6 127 Kg8,665,8 Recommended 6I-6605S EXCAVATOR Kg 0,65 FC550HL2 55 for heavy dutyRecommended and NEW! WITH LbS LHS EXCAVATOR Part# 6,0 67,2 148 75 Kg 3” FC2-600 119-8606 60 Size 67,2 19 148 FC2-350 75 3” FC2-600 S LHS 119-8606 RPL 9N-4352 3560 ERIES adapters.

13 FC2-350 UPIN 1U-3352 35 ADAPTER 84,5 186 FC2-700 FC2-600 222-7700 loader applications 1,14 2,5 FC600HL2 67,260Kg 148 FC2-600 SPart# RHS Kg 119-8605 67,27 148 S RHS 119-8605 3,1 25 0,98" FC2-220 1,7 PIN WITH ADAPTERPIN LbSize Lbapplications.

Part# Size WITH 40 general duty and general TWO LOCKING 1x1 77 169 90 3,5” FC2-700 LH 70 1,47 3,2 FC700HL2 70 76,1 167 FC2-700 S 133-0704 76,1 167 FC2-700 S 133-0704 ck savings 0,10 0,2 FC220HL2 22 12,1 27 FC2-400 RPL 8E-4402 4070 2,4 VECTOR LONG 10,9 24 FC2-450 U 9W-8452 45 3,7 77 169 4,6 77,7 FC2-700 TWO LOCKING 77,7 155 75 SOCKET 3” FC2-700 S LHS 133-0706 S LHS 133-0706 10155 75 25 3”RH FC2-700 0,98" FC2-250-25 Part# loader Size Kg J-SYSTEM Lb OEMapplications.

HEXFC220HL2 J-SYSTEM LHTWO RH 45 0,10133-0705 0,2 22 70FC220HL2 22 LOCKING 0,10 0,2 OPTIONS Suitable excavators 77,7 155 FC2-700 S RHS 77,7 155 FC2-700 S RHS 133-0705 0,12for 0,3 FC250HL221,6 25 Kg Lb DESIGN 17,5 39 FC2-450 RPL 9N-4452 45 Part# OPTIONS Size Kg FC2-550 Lb OPTIONS OEM 48 U 9W-8552 55 4,5 10 30 1,18" FC2-250 1 55 13 29 FC2-450 VTL 7T-8459 45 0,12 0,3 25 FC250HL2 25 0,98" 0,12 loaders 0,3 FC250HL2 3,1 7 25 and FC2-220 6Y-3224 22 0,15 0,3 FC300HL2 30 3,1 7 25 HEX KEY VECTOR LONG OPTIONAL WEAR CAPS

WTS RPHD

VTL

NEW!

WT

NEWN!E

VECTOR LONG 0,15 DESIGN

WTS

NEW!



VTL FC2 ADAPTERE and safe system

12 FC2-300 WTS 135-9308 7 25 5,280,98" FC2-220 6Y-3224 30 22 15 FC2-350 WTS 135-9357 10 25 7,00,98" FC2-250-25 6Y-3254 35 25 10 30 12,41,18" FC2-250 119-325345 25 27 FC2-450 WTS 138-6458 8,0 18 30-32 1,2-1,3” FC2-300 3G-6304 30 0 VTL 9W-8259 15º 55 35 1,4” FC2-300-35 8E-9490 30 0 VTL 107-8609 60EXCAVATOR7,9 17 40 1,57” FC2-350 6I-6354 35 0 VTL 4T-4702 70ADAPTER 10,1 22 CLUSIVE 10,1 40RHS 1,57” FC2-350-B35 3G-8354 35 LHS 22 VECTOR LONG N WITH Part# Kg1,77” Lb OEM 15,3 34 45 FC2-400 6I-6404 Size40 O LOCKING VECTOR Part# Kg Lb OEM Size DESIGN LONG EXCAVATOR 20,6 45 50 FC2-450 6I-6464 4545 131,97" 29 FC2-450 VTL 7T-8459 DESIGN TIONS ADAPTER 13 29 FC2-450 VTL 7T-8459 Self-sharpening 35,3 78 FC2-550 6I-6554 45 20,8 46 FC2-550 VTL 9W-8259 55 Self-sharpening 46 FC2-550 VTLLH9W-8259 KEY 33,2 73 60 20,8 2,36” FC2-550 6I-6556 55 vectorHEX long design 33 73 FC2-600 VTL 107-8609 6055 vector long33,2 design LH VTLRH107-8609 RH 60 33 73 FC2-600 73 FC2-550 6I-6555 45 99 FC2-700 VTL 4T-4702 70 45 99 Part# FC2-700 VTL 4T-4702 FC2-600 Size70 Kg Lb 62,1 137 OEM6I-6604 57,6 127 75 3” FC2-600 LH 6I-6606 60 3,1 7 57,6 25 127 0,98" FC2-220 FC2-600 6Y-3224 RH 6I-660522 4,6 10 84,5 25 186 0,98" FC2-250-25 6Y-3254 25 Size FC2-700 222-7700 4,5 10 7730 169 1,18" 25 70 90 3,5”FC2-250 FC2-700119-3253 LH 45 77 169 1,2-1,3” FC2-700 3G-6304 RH 8,0 18 30-32 FC2-300 30 9HEX 55

0 30 3,1 9t# 35 OEM SizeDesign with4,6 double tip 4,5 90 VTL 45 7T-8459 45

W!!

NEEW N

9 60 70

10

7,9 10,1 10,1 15,3 20,6 35,3 33,2 33,2 62,1 57,6 57,6 84,5 77 77

17 22 22 34 45 78 73 73 137 127 127 186 169 169



35 40 40 45 50

1,4” 1,57” 1,57” 1,77” 1,97"

60

2,36”

75

3”

90

3,5”

FC2-300-35 8E-9490 FC2-350 6I-6354 FC2-350-B35 3G-8354 FC2-400 6I-6404 FC2-450 6I-6464 FC2-550 6I-6554 FC2-550 LH 6I-6556 FC2-550 RH 6I-6555 FC2-600 6I-6604 FC2-600 LH 6I-6606 FC2-600 RH 6I-6605 FC2-700 222-7700 FC2-700 LH FC2-700 RH

30 35 35 40 45 55

60

70

Names, descriptions, illustrations and part numbers of other manufacturers are used within this document as a reference.

Hammerless, quick and safe system

 

RPHD

VTL

NEW!

EXCAVATOR EXCAVATOR ADAPTER VECTOR LONG Kg ADAPTER DESIGN 13 ROCK Self-sharpening 20,8 PENETRATION vector long design 33 Kg Lb HD 45 Kg Lb 3,1 3,1 4,6 4,6 4,5 4,5 8,0 8,0 7,9 7,9 10,1 10,1 10,1 10,1 15,3 15,3 20,6 20,6 35,3 35,3 33,2 33,2 33,2 33,2 62,1 62,1 57,6 57,6 57,6 57,6 84,5 84,5 77 77 77 77

3,1 4,6 4,5 29 FC2-450 VTL 7T-8459 45 Part# KgLH Lb RH 55 OEM Size 8,0 46 FC2-550 VTL 9W-8259 LH RH 7,9 73 FC2-600 VTL 107-8609 60 74,5 163 FC2-700 RPHD 7T-8459 70 Part# Size OEM 10,1 Part# 99 FC2-700 VTLOEM 4T-4702Size 70 25 0,98" FC2-220 6Y-3224 22 10,1 Recommended 25 0,98" FC2-220 6Y-3224 22 25 0,98" FC2-250-25 6Y-3254 25 15,3 for duty and FC2-250-25 6Y-3254 25 25 heavy0,98" 30 1,18" FC2-250 119-3253 25 20,6 loader applications 30 1,18" FC2-250 119-3253 25 35,3 30-32 1,2-1,3” FC2-300 3G-6304 30 30-32 1,2-1,3” FC2-300 3G-6304 30 33,2 35 1,4” FC2-300-35 8E-9490 30 35 1,4” FC2-300-35 8E-9490 30 33,2 40 1,57” FC2-350 6I-6354 35 40 1,57” FC2-350 6I-6354 35 62,1 40 1,57” FC2-350-B35 3G-8354 35 57,6 40 1,57” FC2-350-B35 3G-8354 35 45 FC2-400 6I-6404 40 Kg Lb 1,77” Part# Size 57,6 45 1,77” FC2-400OPTIONAL 6I-6404 WEAR40 CAPS 50 4 F5559 1,97"WC FC2-450 6I-6464 45 1,7 55 84,5 TO INSTALL 50 1,97" FC2-450ARE EASY 6I-6464 45 FC2-550OR REMOVE 6I-6554THROUGHT 2,4 5 F6061 WC 60 77 FC2-550 6I-6554 3,7 70 60 8 F7069 2,36”WC FC2-550 LH 6I-6556 GUIDES 55 77 THE ADAPTER Lb

NEW!

7 7 10 10 10 10 18 18 17 17 22 22 22 22 34 34 45 45 78 78 73 73 73 73 137 137 127 127 127 127 186 186 169 169 169 169



Names, descripti ons, illustrati ons and part numbers ofof other manufacturers are used within this document asas a reference.

Names, descripti ons, illustrati ons and part numbers other manufacturers are used within this document a reference.

4,6 55 10 25 Part# Self-sharpening Kg51 Lb 30-32 OEM 8,023 18 1,2-1,3” 3 FC2-550 RPL Size9N-4552FC2-300 VTLKEY 9W-8259 55 DESIGN 35,6 784,6 FC2-600 60 25 HEX20,8 10 25 30 U 0,98" 6I-6602 FC2-250-25 6Y-3254 Part# Size 0,15 OEM 0,3 30 FC300HL2 0,3 Kg LbFC300HL2 KEY 46 FC2-550 HEX 4,5 10 30 13 29 FC2-450 VTL 7T-8459 45 1,18" FC2-250 design 119-3253 25 0,29 13 0,6 FC350HL2 35 4,5 10 30 vector 29 FC2-450 VTL 7T-8459 45 long 7,9 17 35 1,4” FC2-300-35 Self-sharpening 33 73 FC2-600 VTL 107-8609 60 8,0 18 30-32 1 20,8 46 FC2-550 VTL 9W-8259 55 40,1 88 FC2-600 RPL 7Y-0602 60 15º Self-sharpening 8,0 18 30-3235 1,2-1,3” FC2-300 3G-6304 30 0,29 0,6 35 0,29 0,6 20,815º FC350HL2 46 FC2-550 VTL 9W-8259 55 FC350HL2 vector long design 7,9 17 35 33 73 FC2-600 VTL 107-8609 60 FC400HL2 40 7,9 17 35 vector long design 0,38 33 0,8 1,4” FC2-300-35 8E-9490 30 73 FC2-600 VTL 107-8609 60 10,1 22 40 1,57” FC2-350 45 99 FC2-700 VTL 4T-4702 70 10,1 22 40 45 99 FC2-700 VTL 4T-4702 70 0,38 0,8 40 0,38 0,8 45TWIN FC400HL2 10,1 22 40 40EXCLUSIVE 1,57” FC2-350 6I-6354 35 99 FC2-700 VTL 4T-4702 70 FC400HL2 SYMMETRIC TWIN TIGER 10,1 22 0,48 1,1 FC450HL2 !

10,1 22 40 1,57” FC2-350-B35 3 Kg Lb OEM Part# Size Kg OEM OEM N LHS LHS t# Size Part# RHSPart# 45 10,1 RHS 40 22 Lb 40 1,57” FC2-350-B35 3G-8354 Size 35 EW N PIN WITH Kg Lb Size !

EW0,48 1,1 DESIGN 15,3 34 45 0,48 1,1 45 FC450HL2 45TWO FC450HL2 DESIGN DESIG 15,3 34 45 1,77” FC2-400 6I-6404 40 LOCKING 0,10 0,2 FC220HL2 22 1,4 OPTIONAL FC550HL2 55 20,6 34 SYL 45 FC2-400 20,6 45 50 5,5 1215,3 FC2-300 183-53001,77” 30 5,28 1250 FC2-300 135-9308 00 SYL 183-5300 30 0,65 0,65 OPTIONS 1,97" WTS FC2-450 6I-6464 30 45 0,121,4 0,3 55 FC250HL2 25 45 0,65 FC550HL2 55 1,4 FC550HL2 35,3 78 CAPS 78 FC2-550 6I-6554 Self sharpening design. 7,0 1520,6 Design Design with 2,5 WEAR FC600HL2 60 35,3 45 SYL 50 FC2-450 0,15LOCKING 0,3 FC300HL2 30 HEX KEY OTH 33,2 73 60 FC2-350 168-13591,97" 35 7,0 135-9357 50 SYL COMPATIBILITY 168-1359 35 1,14 1,14 33,2 73 15 60 FC2-350 FC2-550 LH 6I-6556 35 55 1,14 FC600HL2 60 2,36” WTS 2,5 double FC600HL2 0,292,5 0,6 60 FC350HL2 35 33,2 73 Tip with 30% more double tipFC700HL2 35,3 78 FC2-550 33,2 73 FC2-550 RH 6I-6555 1,47 3,2 70 OPTIONS 13,7 30 FC2-450 SYL 159-0459 45 0,38 0,8 FC400HL2 40 12,4 27 FC2-450 WTS 138-6458 45 50FC2 SYL tooth 159-0459 45 62,1 137 62,1 137 FC2-600 6I-6604 1,47 3,2 FC700HL2 70 1,47 3,2 FC700HL2 70 SYMMETRIC TWINwear TIGER ROCK will fitPart# on FC2 Part# Size KgPart# Lb73 OEM FC2-550 material SizeFC450HL2 OEM 57,6 127 LH 75 0,48 1,1 60 Kg Lb 33,2 OEM 2,36” Kg Lb57,645 127 Part# OEMLH 6I-6606 Size 60 Size HEX 75 SOCKET 3” FC2-600 SYMMETRIC TWIN TIGER 57,6 127 Kg Lb 0,65 1,4 FC550HL2 Part#  Size PENETRATION Kg CAPS Lb 33,2 OEM Size Kg Lb57,655SOCKET OEM Size Part#73 HEX FC2-600 SOCKET HEX pters and on JSERIES DESIGN DESIGN 127 Part# RH 6I-6605 WEAR CAPS OPTIONAL WEAR 3 FC2-550 S 107-3554 3G-9494 FC2-550 84,5 186 RH 74,5 163 FC2-700 RPHD 7T-8459 70 1,14 2,5 FC600HL2 60 1,7 4 F5559 WC 55 186 FC2-700 222-7700 5,28 5,5 1284,5 FC2-300 SYL 183-5300 30 DESIGN DESIGN TO INSTALL ARE EASY TO INSTALL12 FC2-300 WTS 135-9308 30 77 169 90 APTERS. 3 1,47 3,255 FC700HL2 60 2,36” FC2-550 S LHS 107-3556 3G-9496 2,4 5 F6061 WCHD60 169 90 3,5” 183-5300 FC2-700 LH 70 5,28 12 FC2-300 WTS 135-9308 30 5,5 127770FC2-300 SYL 30 E THROUGHT OR REMOVE THROUGHT 62,1 137 FC2-600 Self sharpening design.

Design with 77 169 SOCKET HEX 168-1359 3,7 8 F7069 WC 70 169 FC2-700 RH 7,0 15 FC2-350 WTS 135-9357 35 7,0 1577 FC2-350 SYL 35 TER GUIDES THE ADAPTER GUIDES 3 FC2-550 S not RHS JSERIES TOOTH will fit107-3555 3G-9495 Self sharpening design.

Design with Recommended 57,6 127 75 3”35 FC2-600 LH 7,0 15 FC2-350 WTS 135-9357 7,0 15 FC2-350 SYL 168-1359 35 Tip Swith 30% more double tip 6 119-8604 WTS 138-6458 45 13,7 30 FC2-450 SYL 159-0459 45 FC2 adapters FC2-600 and 27 FC2-450 Tip with 30% more double tip for heavy duty12,4 57,6 127 FC2-600EXCAV RH 6 EXCAVATOR wear 12,4 27 FC2-450 WTS 138-6458 45 75 3” FC2-600 S LHSmaterial 119-8606 6013,7 30 FC2-450 SYL 159-0459 45 loader applications wear material 84,5 186 FC2-700 2 ADAP6 ADAPTER FC2-600 S RHS 119-8605 77 169 90 3,5” FC2-700 LH 7 FC2-700 S 133-0704 75 3” FC2-700 S LHS 133-0706 70 77 169 FC2-700 RH 7 LH RH 7 TWIN J-SYSTEM FC2-700 S RHS TIGER 133-0705 Kg Lb OEM Size Part# Size Kg Part# Size OEM DESIGN Kg Lb

60

60

2,36”

75 75

3” 3”

90 90

3,5” 3,5”

Part#

OEM

Size

NEW!

FC2-550 LH FC2-550 RH FC2-550 RH FC2-600 FC2-600 FC2-600 LH FC2-600 LH FC2-600 RH FC2-600 RH FC2-700 FC2-700 FC2-700 LH FC2-700 LH FC2-700 RH FC2-700 RH

Kg

Lb

Part#

Size

1,7 2,4 3,7

4 5 8

F5559 WC F6061 WC F7069 WC

55 60 70

6I-6556 6I-6555 6I-6555 6I-6604 6I-6604 6I-6606 6I-6606 6I-6605 6I-6605 222-7700 222-7700

55

60 60 70 70

OPTIONAL WEAR CAPS ARE EASY TO INSTALL OR REMOVE THROUGHT THE ADAPTER GUIDES

1 1 1 1 1 1

futura_twister_generic_artwork:Layout 1 23/05/2012 13:51 Page 1

TWISTER DRP FOR ESCO SUPERV®

RPL RPL RPL RPL RPL

RP RP RP RP RP

RPHD RPHD RPHD RPHD RPHD

ROCK Futura Twister tannsystemet er ROCK kompatibelt PENETRATION PENETRATION ROCK ESCO SuperV® tenner og ROCK med tannholdere.

LIGHT PENETRATION PENETRATION Twister er også tilgjengelig for mining.

LIGHT

ROCK PENETRATION ROCK LIGHT PENETRATION LIGHT ROCK Part# Kg Lb Cross Ref. Size PENETRATION LIGHT RPL V17TYL, 170 1,5 3 FT170 Part# Kg Lb CrossSD1 Ref. CE Size

FT170 RPL V17TYL, 170 V19TY, SD3 2,9 SD1 CE CE 190 1,5 6 3 FT190 Part# Kg Lb Cross Ref. Size FT190 RPL V23TY, 190 4,3 V19TY, SD4 SD3 CE 230 2,9 9 6 FT230 Part# Kg 3LbFT170 Cross Ref. Size RPL V17TYL, SD1 CE 170 1,5 FT230 RPL V29TYL, 230 6,0 SD5 CE CE 290 4,3 13 9 FT290 V23TY, SD4 FT170 RPL 170 V17TYL, SD1 CE 1,5 3 2,9 6 FT190 RPL V19TY, SD3 CE 190 RPL V29TYL, 6,0 Part# KgS13Lb FT290 CrossSD5 Ref.CE 290 Size FT190 RPL 190 V19TY, SD3 CE 2,9 6 4,3 9 FT230 RPL V23TY, SD4 CE 230 1,5 3 FT170 RPL V17TYL, SD1 CE 170 FT230 RPL 230 4,3 9 V23TY, SD4 CE STANDARD 6,0 13 FT290 RPL V29TYL, SD5 CE 290 STANDARD 2,9 6 FT190 RPL V19TY, SD3 CE 190 FT290 RPL 290 6,0 13 V29TYL, SD5 CE STANDARD 4,3 9 FT230 RPL V23TY, SD4 CE 230

S S S S S

6,0 13 FT290 RPL V29TYL, SD5 CE 290

STANDARD STANDARD

STANDARD

Super V® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only. is a registered trademark ofManufacturer's Esco Corporation.

Manufacturer's names, descriptions, pictures andused part for numbers are used for reference purposes SuperSuper V®trademark is aV®registered trademark of Esco Corporation.

Manufacturer's names, descriptions, pictures and part numbers are used for reference only. only.

Super V®®is a registered of Esco Corporation. names, descriptions, pictures and part numbers are reference purposes only.purposes Super V is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

Kg Lb

Part#

Cross Ref.

Size

S V13SYL, SDM TLR 130 1,0 2 FT130 Kg Lb Part# Cross Ref. Size 1,5 3 FT170 S V17SYL, SD1 TLR 170 1,0 2 FT130 S V13SYL, SDM TLR 130 3,3 7 FT190 S V19SYL, SD3 TLR 190 1,5 3 FT170 S V17SYL, SD1 TLR 170 FT230 S V23SYL, 230 4,3 Lb9 Part# Kg Cross SD4 Ref. TLR Size 3,3 7 FT190 S V19SYL, SD3 TLR 190 FT290 290 6,2 V29SYL, SD5 TLR 130 SSSV13SYL, 1,0 SDM Part# Lb Kg 214 Cross Ref.TLR Size FT230 9 FT130 4,3 V23SYL, SD4 TLR 230 FT330SS V17SYL, 330 8,0 318 FT170 V33SYL,SD1 SD7TLR TLR 170 1,5 FT130 SS V13SYL, 130 1,0 14 2 FT290 SDMTLR TLR 290 6,2 V29SYL, SD5 FT390 S 390 26 11,8 V39SYL, SD8 TLR Part# Lb Kg Cross Ref. Size 3,3 FT170SSS V19SYL, 170 FT330 330 1,5 718 3 FT190 V17SYL,SD3 SD1TLR TLR 190 8,0 V33SYL, SD7 TLR FT430 S 430 35 15,9 V43SYL, SD9 TLR FT130 130 1,0926 V13SYL, SDM TLR 230 SSSSV23SYL, 4,3 FT390 390 FT190 190 11,8 V39SYL, SD8 TLR 72FT230 3,3 V19SYL,SD4 SD3TLR TLR FT510 S 510 19,9 44 V51SYL, SD10 TLR FT170 S V17SYL, 170 1,5 3FT290 SD1 TLR 290 6,2 FT230SSS V29SYL, 230 35 15,9 V43SYL, SD9 TLR 9 FT430 4,314 V23SYL,SD5 SD4TLR TLR 430 FT590 S 590 26,3 58 V59SYL, SD11 TLR FT190 S 190 3,3 7FT330 V19SYL, SD3TLR TLR 510 8,0 FT510 FT290SSS V33SYL, 290 19,9 44 V51SYL, SD10 6,218 14 FT610 V29SYL,SD7 SD5 TLR 330 S 610 31,5 69 V61SYL FT230 S 230 4,3 9FT390 V23SYL, SD4TLR TLR 590 11,8 FT590 26,3 58 V59SYL, SD8 SD11 FT330SSS V39SYL, 330 8,026 18 FT690 SD7 TLR 390 SS V33SYL, 690 40,7 90 V69SYL FT290 290 6,2 14 V29SYL, SD5 TLR 15,9 SD9 FT610 610 31,5 69 V61SYL FT390SSS V43SYL, 390 26FT430 11,835 V39SYL, SD8TLR TLR 430 FT330 S 330 8,0 18 V33SYL, SD7 TLR 19,9 SD10 FT690 690 40,7 90 V69SYL FT430SSSV51SYL, 430 35FT510 15,944 V43SYL, SD9TLR TLR 510 FT390 S V39SYL, SD8 TLR 390 11,8 26 26,3 FT510S SV59SYL, 510 19,95844FT590 V51SYL,SD11 SD10TLR TLR 590 FT430 S 430 35 15,9 V43SYL, SD9 TLR WN 31,5 6958FT610 V61SYL FT590S S V59SYL, 590 26,3 SD11 TLR 610 FT510 S 510 19,9 44 V51SYL, SD10 TLR WELD-ON SS 690 40,7 9069FT690 V69SYL FT610 610 31,5 V61SYL FT590 S 590 26,3 58 V59SYL, SD11 TLR NOSE 690 WELD-ON 40,7 V69SYL WELD-ON FT610SS 610 31,590 69 FT690 V61SYL

WN WN NOSE WN WN WN

NOSE 40,7 90 FT690 S

V69SYL

690

WELD-ON NOSE WELD-ON Part# NOSE Lb Kg Cross Ref. Size WELD-ON NOSE1,1 FT130 WN 130 0,5 Part# Lb Kg Cross Ref. Size

170 0,9 2,0 FT170 WN 130 0,5 1,1 FT130 WN 1,8 4,0 FT190 WN WN-V19 190 170 0,9 2,0 FT170 WN 2,7 5,9 FT230 WN WN-V23 230 Part# Lb Kg Cross Ref. Size 1,8 4,0 FT190 WN WN-V19 190 3,7 8,1 FT290 WN WN-V29 290 WN-V23 230 5,9 FT230 WN Cross 2,7 0,5 WN Part# Lb FT130 Kg 1,1 Ref.130 Size 330 11,4 FT330 WN WN-V33 5,2 Part# Lb FT290 Kg 8,1 Cross Ref. 290 Size WN WN-V29 3,7 0,9 130 0,5 2,0 1,1 FT170 FT130WN WN WN-V39 170 15,8 FT390 WN 7,2 390 WN-V33 330 11,4 FT330 WN 5,2 130 0,5 4,0 1,1 FT190 FT130 WN WN-V19 WN 1,8 170 0,9 2,0 FT170 WN 22,2 FT430 WN 10,1 WN-V43 190 430 15,8 FT390 WN 7,2 WN-V39 230 390 170 0,9 5,9 2,0 FT230 FT170 WN WN-V23 WN 2,7 WN-V19 510 190 4,0 FT190 WN 1,8 32,9 FT510 WN 15,0 WN-V51 22,2 FT430 WN 10,1 WN-V43 430 WN-V19 290 190 4,0 FT290 FT190 WN WN-V29 1,8 8,1 WN 3,7 WN-V23 230 5,9 FT230 WN 2,7 41,8 FT590 WN 19,0 WN-V59 590 32,9 FT510 WN 15,0 WN-V51 WN-V23 510 230 FT230 WN WN-V33 2,7 5,9 FT330 5,2 WN-V29 330 290 8,1 FT610 FT290WN WN WN-V61 3,7 11,4 23,5 610 51,7 WN 41,8 FT590 WN 19,0 WN-V59 WN-V29 590 290 FT290 WN WN-V39 3,7 8,1 FT390 7,2 WN-V33 390 330 11,4 FT690 FT330WN WN WN-V69 5,2 15,8 33,8 690 74,4 WN WN-V33 330 11,4 FT330 WN 5,2 23,5 WN-V61 430 610 51,7 FT430 FT610WN WN WN-V43 10,1 47,5 15,8 FT710 FT390WN WN WN-V71 7,2 22,2 104,5 WN-V39 710 390 15,8 FT390 WN 7,2 WN-V39 390 33,8 WN-V69 690 74,4 FT510 FT690WN WN WN-V51 510 15,0 185,2 84,2 22,2 FT810 FT430WN WN WN-V81 10,132,9 WN-V43 810 430 22,2 FT430 WN 10,1 WN-V43 430 47,5 WN-V71 710 104,5 FT710 WN 19,0 32,9 FT590 FT510WN WN WN-V59 15,041,8 WN-V51 590 510 32,9 FT810 FT510WN WN WN-V81 15,0185,2 WN-V51 810 510 84,2 23,5 41,8 FT610 FT590WN WN WN-V61 19,051,7 WN-V59 610 590 19,0 41,8 FT590 WN WN-V59 590 33,8 74,4 23,5 WN-V61 690 610 51,7 FT690 FT610WN WN WN-V69 23,5 51,7 FT610 WN WN-V61 610 47,5 710 104,5 FT710 WN WN-V71 33,8 690 33,8 74,4 WN-V69 690 74,4 FT690 FT690 WN WN WN-V69 WN-V81 810 185,2 FT810 WN 84,2 47,5 710 EXTFT 47,5104,5 WN-V71 710 104,5 FT710 FT710 WN WN WN-V71 810 84,2 WN-V81 810 185,2 FT810 FT810 WN WN WN-V81 84,2185,2

EXTRACTION TOOL EXTRACTION

EXTFT EXTFT EXTFT EXTFT EXTFT Part#

TOOL EXTRACTION TOOL For extraction of Sizes:

EXTFT-1333 130 170 190 230 290 330 Part# For extraction of Sizes: EXTFT-3961 EXTRACTION 390 430 510 590 610 EXTFT-1333 130 170 190 230 290 330 EXTFT-6981 TOOL 690 710 810 EXTRACTION EXTRACTION EXTFT-3961 390 430 510 590 610 TOOL TOOL EXTFT-6981 690 710 810 Part# For extraction of Sizes: Part# 130 For extraction of Sizes: EXTFT-1333 170 190 230 290 330 Part# For extraction of Sizes: EXTFT-1333390 130 170510 190590 230610 290 EXTFT-3961 430 EXTFT-1333 130 170 190 230 290 330 330 EXTFT-3961690 390 430810 510 590 590 610 EXTFT-6981 710 EXTFT-3961 390 430 510 610 EXTFT-6981 690 710 810 EXTFT-6981 690 710 810

ROCK PENETRATION ROCK HD PENETRATION HD ROCK

ROCK PENETRATION ROCK PENETRATION

ROCK Part# Kg Lb PENETRATION

Cross Ref.

330 10,0 Part#RP V33AD, Kg 22 Lb FT330 CrossSD7 Ref.SA Size

Kg

FT330 RP V39AD, 330 15,5 V33AD, SD8 SD7 SA 390 10,0 34 22 FT390 Part# Kg Lb Cross Ref. Size FT390 RP V39AD, 390 V43AD SD8 SD9 SA 20,2 SA 430 15,5 44 34 FT430 Part# Kg 22Lb FT330 Cross Ref. Size RP V33AD, SD7 SA 330 10,0 FT430 RP V51AD 430 SA 510 27,1 V43AD SD10 SD9 SA 20,2 60 44 FT510 FT330 RP 330 V33AD, SD7 SA 10,0 22 15,5 34 FT390 RP V39AD, SD8 SA 390 510 27,1 60 Part#RP V51AD Kg Lb FT510 CrossSD10 Ref. SA Size RC FT390 RP 390 V39AD, SD8 SA 15,5 34 20,2 44 FT430 RP V43AD SD9 SA 430 10,0 22 FT330 RP V33AD, SD7 SA 330 FT430 RP 430 V43AD SD9 SA 20,2 44 ROCK 27,1 60 FT510 RP V51AD SD10 SA 510 ROCK 15,5 34 FT390 RP V39AD, SD8 SA 390 CHISEL 27,1 60 FT510 RP V51AD SD10 SA 510 ROCK CHISEL 20,2 44 FT430 RP V43AD SD9 SA 430

CHISEL

27,1 60 FT510 RP V51AD SD10 SA 510

Cross Ref.

Size

FT330 RC V33SD, SD7 PR 330 8,0 Kg 18 Lb Part# Cross Ref. Size RC V39SD, SD8 PR 390 11,6 26 FT390 8,0 18 FT330 RC V33SD, SD7 PR 330 RC V43SD, SD9 PR 430 16,1 35 FT430 390 11,6 26 FT390 Part#RC V39SD, Kg Lb CrossSD8 Ref.PR Size V51SD, 510 21,3 FT430 RC V51SDX, 430 16,1 47 V43SD, SD10 SD9 PR 35 FT510 Part# RC V33SD, Kg 18LbFT330 Cross Ref. Size SD7 PRPR 330 8,0 V51SD, V59SD, V59SDX, FT510 RC 510 21,3 47 FT590 RC 590 390 58 26,2 V39SD, SD8 PR 11,6 FT330RC RCV51SDX, 330 V33SD, SD7 PR 8,0 26 18FT390 SD11SD10 PR Kg Lb Part# Cross Ref. Size 430 16,1 V43SD, SD9 FT390RC RC V61SD, 390 V59SD, V59SDX, V39SD, SD8PRPR 590 11,635 26FT430 V61SDX, FT590 RC 58 26,2 FT610 RC 610 32,5 V33SD, SD7 8,0 72 18 FT330 SD11 PRPR 330 SD12 PR V51SD, FT430RCRC V43SD, 430 16,14735FT510 SD9 PR 510 21,3 FT390 RC 390 V39SD, SD8 PR 11,6 26 V61SD, V61SDX, V51SDX, SD10 PR 690 FT690 RC 102 V69SD 46,5 610 32,5 72 FT610 SD12 PR V51SD, FT510RCRC V59SD, 510 21,3 35 47FT710 FT430 430 16,1 V43SD, SD9 PR V59SDX, SD10 PR710 RC V51SDX, V71SD 56,4 124 590 58 FT590 26,2 690 FT690 RC RC V69SD 46,5 102 SD11 PR V51SD, V59SD, V59SDX,510 FT810 810 FT510 RC 90,3 V81SD 199 21,3 47 FT590 RC 590 58 26,2 SD10 FT710 RC RC V51SDX, V61SD, V61SDX, V71SD 56,4 124 SD11 PRPR 710 610 72 FT610 32,5 SD12 PR V59SDX, FT810 RC RC V59SD, 810 90,3 V81SD 199 V61SD, V61SDX, FT590 590 58 26,2 FT610RCRC ASD11 610 D PR 72FT690 32,5102 RV69SD 690 46,5 SD12 PR

SYL SYL SYL SYMMETRIC TWISTER SYL OR DU ISTE TW SYL DUO SYL

D

STAN

V61SDX, 610 710 FT610 56,4 690 FT690RCRC V61SD, 72 32,5 102FT710 46,5124 DV69SD RV71SD PR ASD12 AND ST SYMMETRIC 810 90,3 V81SD 710 FT710RC RC 124FT810 V71SD 56,4199 690 FT690 RC 102 V69SD 46,5

FT810RCRC 90,3124 199FT710 56,4 SYMMETRIC

V81SD V71SD

D DARV81SD RC 90,3 199 FT810 S TAN D DAR N A ST SYMMETRIC RD A D STAN

SYMMETRIC SYMMETRIC

TWISTER DU ISOTER TW Kg Lb TER IS O Part# TW DU 0,8 2 OFT130 SYL Lb Part# KgDU

810

LOADER

FLARE FLARE

FLARE Kg

Lb

Part#

Cross Ref. Size

FT230 F 230 4,6 10 V23S5F Part# Lb Kg Cross Ref. Size FT290 F 290 7,0 15 V29S6F FT230 F 230 4,6 10 V23S5F FT330 F 330 10,4 23 V33S7F FT290 F 290 7,0 15 V29S6F Part# Kg 32Lb FT390 Cross Ref. 390 Size F 14,7 V39S8F FT330 F 330 10,4 23 V33S7F FT230 230 F F V43S9F 430 V23S5F 4,6 10Lb FT430 Part# 20,2 44 Kg Cross Ref. Size system FT390 F 390 14,7 32 V39S8F F F F V51S10F FT290 290 27,5 V29S6F 7,0 61 15 FT510 FT230 V23S5F 510 430230 20,24,6 44 10 FT430 F V43S9F FT330 F EXCAVATOR 330 10,4 FT290 F V33S7F V29S6F 7,0 2315 FT510 F Cross Kg Ref. Size510290 27,5 V51S10F I Lb61 Part# FT390 390 14,7 FT330F F V39S8F 330 10,4 3223 V33S7F FT230 F 230 4,6 10 V23S5F FT430 430 20,2 FT390F F V43S9F 390 14,7 4432 V39S8F FT290 F 290 7,0 15 V29S6F IMPACT FT510 F 510 27,5 61 V51S10F IMPACT F FT330FT430 F 330 430 23 44 10,4 20,2 V33S7FV43S9F IMPACT F V51S10F FT390FT510 F 390 510 32 61 14,7 27,5 V39S8F

WTL WTL WTL WTL WTL

I

TL TL TIGER LONG TL TLTL

VTL VTL VECTOR TIGER VTL LONG VTLVTL

TIGER LONG TIGER LONG TIGER Kg Lb LONG

HAMMERLESS

Size

TWISTER PIN FUTURA TWISTER pins could be reFUTURA TWISTER used several times pins could TWISTER PINbe reFUTURA TWISTER used several times TWISTER PIN TWISTER PIN pins are designed to FUTURA TWISTER FUTURA TWISTER FIG A be used with other pins could be re- to pins are designed FUTURA TWISTER FUTURA TWISTER HELIX style products FIG A used several times be used with other pins be repins could be rein thecould market HELIX style products used times usedseveral several times FUTURA TWISTER Special HOT SLAG in the pins aremarket designed FUTURA TWISTER FUTURA TWISTERto pins available FIG A Special SLAG be used with othertoto FIG pins are designed pins areHOT designed FUTURA TWISTER FIG AAA FIG pins available be used with other HELIX style products be used with other kan brukes flere HELIX style in the market HELIX styleproducts products in ganger, og SLAG den inthe themarket market Special HOT Special HOT SLAG vil også passe på pins available Special HOT SLAG pins pinsavailable available lignende tannsystemer.

Cross Ref. Size

I I I

FT610 34,7 V61TVP 590 610 TIGER FT590 WTLWTL V59TVY 26,9 59 76 LONG 610 34,7 76 FT610 WTL V61TVP

130 V13SYL Cross Ref. Size LESS 170 1,4 3 FT170 SYL V17TYL HAMMER 130 0,8 2 FT130 SYL V13SYL 190LESS 2,5 6 FT190 SYL V19SYL MER HAM 170 1,4 3 FT170 SYL V17TYL LESS 3,5 8 FT230 SYL V23SYL HAMMER230 190 Part#SYL Cross Kg Ref. Size 6 2,5 Lb FT190 V19SYL 290 5,8 13 FT290 SYL V29SYL 230 3,5 FT230 SYL V23SYL 130 28Lb FT130 0,8 SYL V13SYL Part# Kg 15 Cross Ref. 330 Size 6,9 FT330 SYL V33SYL Lb FT170 Part# Kg 13 Ref. Size 290 5,8 FT290 SYL Cross V29SYL 170 3 1,4 V17TYL 130 2 FT390 0,8 24 FT130SYL SYL V39 V13SYL 390 10,8 SYL SYL 330 6,9 FT330 SYL SYL V13SYL V33SYL 130 0,8 15 FT130 190 623 FT190 2,5 170 1,4 33 FT170SYL SYL V19SYL V17TYL 430 14,9 FT430 V43SYL 390 10,8 FT390 SYL SYL V17TYL V39 SYL 170 1,4 24 FT170 SYL 230 836 FT230 3,5 190 2,5 40 FT190SYL SYL V23SYL V19SYL 510 18,3 FT510 V51SYL 430 33 14,9 FT430 SYL SYL V19SYL V43SYL 190 6 2,5 13 FT190 SYL 5,8 230 3,5 8 FT290 FT230 SYL V29SYL V23SYL 290 510 8 3,5 15 FT230 SYL 18,3 40 FT510 SYL SYL V23SYL V51SYL 230 6,9 290 5,8 13 FT330 FT290 SYL V33SYL V29SYL 330 5,8 24 13 FT290 SYL SYL V29SYL 390 10,8 SYL 290 330 6,9 15 FT390 FT330 SYL V39 V33SYL 330 6,9 33 15 FT430 FT330 SYL SYL V33SYL 430 14,9 V43SYL 390 10,8 24 FT390 SYL V39 SYL 390 10,8 24 FT390 SYL V39 SYL 510 18,3 40 FT510 SYL V51SYL 430 14,9 33 FT430 SYL V43SYL 430 14,9 33 PIN FT430 SYL V43SYL TWISTER 510 18,3 40 40 FT510 FT510SYL SYL V51SYL V51SYL 510 18,3

PN / HPN PN / HPN PN / HPN PN / HPN PN//HPN HPN PN TWISTER PIN

Lb

LONG

810 710

HAMMERLESS

Cross Ref.

FLARE

610 FT590 RPHD V61ARL 590 46,6 V59AR 43,0 103 95 FT610 Part# Kg Lb Cross Ref. Size FT610 RPHD V69ARL 610 64,0 V61ARL 690 46,6 141 103 FT690 KgThe Ref. 590 Size FT590Part# RPHD Cross V59AR 43,0 95Lbnew FUTURA helix style FT690 RPHD V71ARL 690 89,2 64,0 196 141 FT710 V69ARL 710 FT590 RPHD 590 V59AR 43,0 95 46,6 Sizes 103 FT610 RPHD V61ARL 610 710 V71ARL 89,2 Lb 196 FT710 Part#RPHDCross Kg Ref. Size WTL FT610RPHD RPHD V69ARL 610 V61ARL 690 46,6 141 103 FT690 130 64,0 Light V59AR 590 170 FT590 RPHD 43,0 95 Construction FT690 RPHD 690 64,0 141 V69ARL TWIN TIGER 190 FT710 RPHD V71ARL 710 89,2 196 TWIN TIGER FT610 RPHD V61ARL 610 46,6 LONG103 230 FT710 RPHD 710 V71ARL 89,2 196 TWIN TIGER LONG 290 FT690 RPHD 64,0 V69ARL 690 Construction LONG141 330 FT430 F 430 20,2 44 V43S9F 390 FT710 RPHD V71ARL 710 89,2 196 FT510 F 27,5 61 V51S10F 510 TWIN TIGER IMPACT 430 LONG TWIN510 TIGER Heavy IMPACT Construction LONG590 610 TWIN TIGER IMPACT Part# Kg Lb 690Part# Cross Ref. Size Kg Lb Cross Ref. Size LONG Mining 710 WTL V13TVY, SDM DPE 130 FT230 230 V23RYL 0,9 2 FT130 4,0 9 Part# I Kg Lb Cross Ref. Size Kg Lb Cross Ref. Size 810 Part# 290 V29RYL 1,6 3 FT170 WTL V17TVY, SD1 DPE 170 5,7 13 FT290 I FT230 I 230 V23RYL 0,9 2 FT130 WTL V13TVY, SDM DPE 130 4,0 9 FT190system WTL featuring 330 2,9 6Complete V19TVY, SD3 DPE 190 7,3 16 FT330 I V33RYL teeth, adapters, FT170 WTL 170 FT290 I 290 1,6 3 5,7 13 V17TVY, SD1 DPE V29RYL Part# Part# weld-on noses and pins ✔ Kg Lb Cross Ref. Size Kg Lb Cross Ref. Size 390 4,4 10 FT230 WTL V23TVY, SD4 DPE 230 11,2 25 FT390 I V39RYL FT190 330 2,9 6Variety V19TVY, SD3 DPE 7,3 16 FT330 I V33RYL of WTL designs to suit common and 190 FT130 WTL V29TVY, 130 FT230 230 Part# Part# V13TVY, SDM DPE V23RYL 0,9 2heavy 4,0 Kg13 LbFT290 Cross Ref. Size Kg329Lb FT430 Cross Ref. 430 Size WTL 290 II 5,8 14,6 SD5 DPE V43RYL duty excavator or loader applications ✔ 390 4,4 10 FT230 WTL V23TVY, SD4 DPE 230 11,2 25 FT390 I V39RYL FT170 WTL 170 FT290 290 1,6 3Sizes 5,7 139 FT510 V17TVY, SD1 DPE V29RYL I I I V51RYL from WTL 130 to 810 ✔ 8,3 19,8 V33TVY, SD7 DPE FT130 WTL 130 FT230 230 V13TVY, SDM DPE330 V23RYL 510 0,918 2FT330 4,044 WTL V29TVY, 290 FT430 I CrossV43RYL 430 5,8 Lb 14,6Lb32 Part# 13 FT290 SD5 DPESize Part# Kg Cross Ref. Kg Ref. Size helix style TWISTER teeth, adapters and 390 FT190 WTL 190 FT330 330 WTL I I I V59RYL 2,9 6The3FT390 V19TVY, SD3 DPE 7,3 1613 FT590 V33RYL 11,9 SD8 DPE 25,7 FT170 WTLV39TVY, 170 FT290 290 1,626 5,757 V17TVY, SD1 DPE330 V29RYL 590 FT330 WTL FT510 I 510 pinsare suitable to be used with any other helix 8,3 19,8 18 44 V33TVY, SD7 DPE V51RYL WTL V13TVY, SDM DPE 130 FT230 I 230 V23RYL 0,9 2 FT130 4,0 9 FT230 WTL 230 FT390 390 WTL I I I V61RY 4,4 10 11,2 2516 FT610 V23TVY, SD4 DPE V39RYL 16,6 28,1 V43TVY, DPE style parts available in the marketSD9 ✔ FT190 WTL 190 FT330 330 2,937 6FT430 V19TVY, SD3 DPE430 7,362 V33RYL 610 FT390 WTL 390 FT590 I 590 11,9 26 V39TVY, SD8 DPE 25,7 57 V59RYL 290 1,6 3 FT170 WTL V17TVY, SD1 DPE 170 5,7 13 FT290 I V29RYL FT290 WTL 290 FT430 430 WTL I I I V69RYL 5,8 14,6 1310FT510 V29TVY, SD5 DPE 3225 FT690 V43RYL 21,4 44,1 V51TVY, SD10 PRD 97 FT230 WTL FT390 390 4,447 11,2 V23TVY, SD4 DPE510 V39RYL 690 FT430 WTL 430230 FT610 16,6 28,1 V43TVY, SD9 DPE V61RY WTL 190 I I V33RYL 330610 2,9 637FT190 V19TVY, SD3 DPE 7,3 1662 FT330 WTL I I V71RXL, FT330 WTL 330 FT510 510 26,9 54,2 119 V59TVY V71RYL 710 8,3 19,8 18 FT590 4432 FT710 SD7 DPE V51RYL FT290 WTLV33TVY, FT430 I 430 5,859 14,6 V29TVY, SD5 DPE590 V43RYL FT510 WTL 510290 11,2 FT690 21,4 44,1 4713 V51TVY, SD10 PRD V69RYL FT230 WTL 230 I I V39RYL 390690 4,4 10 2597 FT390 V23TVY, SD4 DPE WTL I I V81RXL FT390 WTL 390 FT590 590 34,7 V61TVP 87,0 191 V81RYL 810 11,9 26 FT610 SD8 25,7 5744 FT810 V59RYL FT330 WTLV39TVY, FT510 I 510 8,376 19,8 V33TVY, SD7DPE DPE610 V51RYL FT590 WTL 590330 14,6 FT710 26,9 54,2 5918 V59TVY FT290 WTL I I V71RXL, 430710 5,8 13 V29TVY, SD5 DPE 290 32119FT430 V43RYLV71RYL WTL 430 I I 610 16,6 37 FT430 28,1 6257 FT610 SD9 V61RY FT390 WTLV43TVY, 390 FT590 590 11,9 V39TVY, SD8DPE DPE610 25,7 V59RYL510810 FT610 WTL FT810 34,7 7626 V61TVP 87,0 FT330 WTL I I V81RXL 8,3 19,8 18 44191FT510 V33TVY, SD7 DPE 330 V51RYLV81RYL WTL V51TVY, 510 690 21,4 44,1 9762 FT690 47 FT510 SD10 PRD V69RYL FT430 FT610I I 610 16,6 V43TVY, FT390 WTLWTL 390 430 25,7 28,1 11,9 26 37 V39TVY, SD8 SD9 DPE DPE 57 FT590 I V59RYLV61RY590 WTL V51TVY, FT710 I I V71RXL, 26,9 54,2 119 59 FT590 V59TVY PRD590 V71RYL 710 TL VTL FT510 21,4 FT430 WTLWTL FT610FT690 I 16,6 37 47 62 97 V43TVY, SD9SD10 DPE 430 510 28,1 44,1 V61RYV69RYL610 690 TIGER VECTOR FT610 WTL 610 FT810 I I V81RXL 810 34,7 76FT510 V61TVP 87,0 191 FT590 26,9 V59TVY V71RXL,V81RYL V71RYL WTLWTL FT690FT710 I 690 710 21,4 47 59 V51TVY, SD10 PRD 510 590 44,1 54,2 97 119 V69RYL

RC RC RC RC RC

ROCK CHISEL ROCK CHISEL ROCK Kg Lb Part# CHISEL

F F F F F

FLARE

PENETRATION ROCK HD PENETRATION HD ROCK Part# Kg Lb Cross Ref. Size PENETRATION HD RPHD V59AR 590 43,0 95 FT590 Part#

Size

LOADER LOADER LOADER LOADER

Part#

Cross Ref.

Size

0,8 Kg

2 Lb

FT130 130 Part#TL V13VY, CrossSDM Ref. PE Size

1,3 0,8

3 2

FT170 V17VY, SDM SD1 PE FT130 TL TL V13VY, 130 PE 170

2,5 FT170 TL TL V19VY, SD3 170 1,3 6 3 FT190 SD1 PE PE 190 Part# V17VY, Kg Lb Cross Ref. Size FT230 TL V23VY, SD4 PE 3,5 8 FT190 TL 190 2,5Kg 6 Lb FT130 SD3Ref. PE 230 Part# Cross Size TL V19VY, 0,8 2 V13VY, SDM PE 130 Part# Kg Lb Cross Ref. 290 11 FT290 TL SD5 PE 5,0 TLTLV29VY, 230 SD4 PESize 3,5 FT130 130 0,8 83 2 FT230 V13VY, SDM FT170 TL V23VY, 1,3 V17VY, SD1 PEPE170 TLTLV13VY, 0,8 215 FT130 SDM PEPE130 FT330 330 SD7 6,9 FT290 TLTLV33VY, 290 V29VY, SD5 PE PE 5,0 FT170 170 1,3 11 V17VY, SD1 TL V19VY, 2,5 SD3 PE 190 6 3 FT190 TLTL V17VY, 1,3 321 FT170 SD1 PEPE170 390 9,7 SD8 FT330 TLTLV39VY, 330 V33VY, SD7 PE PE 15 6 FT390 6,9 FT190 190 2,5 V19VY, SD3 3,5 8 FT230 TL V23VY, SD4 PE 230 TLTL V19VY, SD3 PE 190 2,5 630 FT190 FT430 430 SD9 PE 13,6 FT390 TLTLV43VY, 390 9,7 V39VY, SD8 PE PE FT230 230 V23VY, SD4 3,5 21 FT290 TL V29VY, 290 118FT230 SD5 PE 5,0 TL V23VY, SD4 PE 230 3,5 8 FT430 TLTLV43VY, SD9 PE 430 13,6 FT290 290 11 FT330 V29VY,SD7 SD5PEPE330 5,0 30 TL V33VY, 15 6,9 5,0 11 FT290 TL V29VY, SD5 PE 290 FT330TLTLV39VY, 330 V33VY,SD8 SD7PEPE390 6,9 2115 FT390 9,7 6,9 15 FT330 TL V33VY, SD7 PE 330 FT390TLTLV43VY, 9,7 3021FT390 V39VY,SD9 SD8PE PE 390 FT430 13,6 TL V39VY, SD8 9,7 21 PE 390430 FT430 TL V43VY, SD9430 430 13,6 SD9 PE PE 13,6 30 30FT430 TL V43VY,

FIG B HOT FIG B SLAG HOT SLAG

FIG B FIG HOT FIG B BB FIG SLAG HOT HOT SLAG HOT SLAG SLAG

FIG C FIG C

FIG D HOT SLAG FIG D HOT SLAG

FIG C

FIG D

FIGFIG CC C FIGHOT D FIG FIG SLAG FIG D D HOTHOT SLAG SLAG HOT SLAG

I

EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR

TIGER

I V81RXL 87,0 VECTOR FT710FT810 I V71RXL, 710 810 54,2 119 191 V71RYLV81RYL LONG TIGER 87,0 191 FT810 I V81RXL V81RYL 810

LONG VECTOR TIGER VECTOR LONG TIGER Kg Lb Part# Cross Ref. Size VECTOR LONG TIGER V51VYH 510 VTL V51VY, 18 Kg 39 Lb FT510 Part# Cross Ref. Size SD10 PE LONG

V51VY, V59VYH V51VYH 510 FT510 VTL V59VY, 18 50 39 FT590 590 23 SD10 PE SD11 V59VY, V59VYH FT610 VTL 610 28 V61VX, SD12 PE 61 Kg Lb Part# Cross Ref. Size FT590 VTL 590 23 50 SD11 PE VTL V51VY, 690 V69VX 40 Kg89 LbFT690Part# V51VYH Ref. Size 28 SD12 PE 610 FT510VTL VTLV61VX,Cross 510 39 FT610 18 61 SD10 Kg51Lb112 FT710 Part# VTL CrossV71VX Ref. PESize710 VTLVTL V51VY, 690510 V69VXV51VYH 40 1889 39FT690 FT510 V59VY, V59VYH FT810 VTL 810 V81VX 176 80 SD10 PE FT590 VTL 590 V51VY, V71VX V51VYH 23 50 FT710 FT510 VTLVTL 1851 39112 SD11 PE 510710 SD10 PE V59VYH V59VY, FT590 VTLV61VX, 590 VTL V81VX 176 80 FT610 VTL 610 2823 SD12 PE810 6150FT810 V59VY, V59VYH SD11 PE F Part# Kg Lb Cross Ref. Size 590 23 50 FT590 VTL PE 690 V69VX 4028 8961 FT690 FT610VTL VTLSD11 610 V61VX, SD12 PE V13-17PN 130 A Cross FT1317 0,1 FT610 VTLPNV61VX, 280,0 SD12 PE 610Size 61 Part# Kg Lb Ref. 170 710 112 V71VX 51 FT690VTL VTLF SDMCL/1CL 690 V69VX 40 89 FT710 V23PN 190 FT690 VTL 690 V69VX 400,1 89 V13-17PN 130 A FT1923 PN FT810 VTL 810 0,2 V81VX 176 8051 FT710 VTL 710 A SDMCL/1CL FT1317 PN 112 V71VX 230 0,0 0,1 SD3/SD4CL 710170 V71VX 51 112 FT710 VTL A V29PN, SD5CL 290 FT290 PN VTL 0,1 80 0,3176 V23PN FT810 190810 V81VX FT1923 0,2FT810 VTLPN A V81VX 810230 800,1176 SD3/SD4CL Part# Kg0,3 Lb FT330 Cross Ref. 330 Size SD7CL PN A F V33PN, 0,1 0,1 0,3 FT290 PN A V29PN, SD5CL 290 V13-17PN B A F V39HPN 130 HPN 0,3 0,6 Part# Kg LbFT390 Cross Ref.390 Size FT1317 0,0 0,1 V33PN, SD7CL 170 SDMCL/1CL FT330 PNPN F ACross Part# Kg0,1 Lb0,3 Ref. Size330 SD8CL 0,2 0,4 FT390 PN A V39PN,V23PN V13-17PN 130 190 A V39HPN FT1317 PN B AV13-17PN FT390 HPN 0,0 0,1 0,3 0,6 130 FT1923 PN 0,1 0,2 170 SDMCL/1CL390 SD3/SD4CL 0,00,3 0,10,7FT1317 V43HPN FT430PN HPNA BSDMCL/1CL 170 230 430 SD8CL V39PN, FT390 PN V23PN 190 0,2 0,4 V29PN, SD5CL FT290 PN 290 A FT1923 PNAA AV43PN, V23PN 0,1 0,3 190 0,1 0,2 SD9CL FT430 PN 0,3 0,6 230 SD3/SD4CL A FT1923 PN 0,1 0,2 BSD3/SD4CL V43HPN 230 FT430 HPN 0,3 0,7 SD7CL FT330 PN 330 0,1 0,3 D A AV33PN, V51HPN FT510 HPN 430 0,4 0,9 V29PN, SD5CL FT290 PN 0,1 0,3 SD5CL PNPNA V29PN, 290510290 0,10,3 0,30,6 FT290 SD9CL A V43PN, FT430 BV51PN, V39HPN FT390 HPN 0,3 0,6 SD10CL PN 0,8 A V33PN, FT330 PNC 330 0,1 0,3FT510 A V33PN, SD7CL SD7CL PNHPN 330 390 0,10,4 0,3 D V51HPN FT510 0,4 0,9 FT330 SD8CL 510 FT390 PN 0,2 0,4 V59HPN HPN 1,0 B V39PN, V39HPN FT390 HPND AV39HPN 0,3 0,6FT590 HPN 0,30,5 0,6 590 SD10CL FT510 PNB C V51PN, 0,4 0,8FT390 390 390 BV59PN, V43HPN FT430 HPN 0,3 0,7 SD10CL FT590 PN 0,9 A V39PN, FT390 PNC 0,2 0,4FT590 V39PN, SD8CL SD8CL 430 A PNHPN 0,20,4 0,4 D V59HPN 0,5 1,0 FT390 V43PN, SD9CL A FT430 PN D V61HPN 0,3 0,6 FT610 HPN 590 0,5 1,1 B V43HPN FT430 HPN 0,3 FT430 0,7 HPNPNB C V59PN, V43HPNSD10CL 610 0,30,4 0,7 0,9 FT590 430 430 DV61PN, V51HPN FT510 HPN SD12CL FT610 0,4 0,9 1,0 SD9CL 510 A V43PN, FT430 PNC V43PN, SD9CL A 0,3 0,6 FT430 PNPN 0,30,5 0,6 V61HPN 0,5 1,1 FT610 HPN D SD10CL690 FT510 PN V69PN FT690 0,4 0,8 610 1,7 DV51PN, V51HPN FT510 HPN D C CV51HPN FT510 HPNPN 0,4 0,40,8 0,9 0,5 1,00,9FT610 PN C V61PN, SD12CL 510690510 V59HPN FT590 HPN 0,5 1,0FT510 D D C V69HPNA FT6971 SD10CL C PNHPN V51PN, SD10CL FT510 PNV51PN, 0,40,9 0,81,9 710 590 V69PN 690 1,70,8FT690 PN C 0,80,4 SD10CL FT590 PN 0,4 0,9 D C CV59HPN FT590 HPNPN 0,50,8 1,0 DV59PN, V59HPN FT590 HPN 0,5 1,0FT710 V71PN 710 1,8 D V69HPNA 590690 FT6971 HPN 590 1,9 0,9 710 D V61HPN FT610 HPN 0,5 1,1 V59PN, SD10CL C FT590 PN 0,41,2 0,9 FT590 0,4 V81PN SD10CL PN PNC C V59PN, 810 2,70,9FT810 610 V71PN FT710 1,8 SD12CL710 PN 0,5 1,0 D C CV61HPN FT610 HPNPN 0,50,8 1,1 DV61PN, V61HPN FT610 HPN 0,5 1,1 FT610 610 C C SD12CL V81PN FT810 810610 2,7 V69PN FT690 PN C FT610 PNPN 1,7 0,8 0,51,2 1,0 SD12CL690 C V61PN, FT610 PNV61PN, 0,5 1,0 C V69PN FT690 PN HPN 690 690 1,7 0,8 0,9 V69HPNA FT6971 V69PN FT690 PN D C 690 1,7 0,81,9 710 690 690 D FT6971 HPNPN 1,9 0,9 0,8 V71PN 710 710 D V69HPNA FT6971 HPNCV69HPNA 1,9 FT710 0,91,8 710 C V71PNV81PN 710 810 FT710FT710 PN PN 1,8 0,8 1,2 V71PN PN C C 710 1,8 FT810 0,82,7 V81PN PN C 810 1,2 2,7 FT810FT810 V81PN PN C 810 1,2 2,7

5 5

5

Steel solutions for tough conditions

5 5

11

® ® COMPATIBLE WITH ESCO SV2 ® COMPATIBLE WITH ESCO SV2 ® ESCO SV2 COMPATIBLE COMPATIBLE WITH ESCO SV2WITH

TWISTER T2 DRP T2 COMPATIBLE COMPATIBLE FOR ESCO SV2 COMPATIBALE WITH ESCOESCO SV2 ® WITH WITH ESCO COMPATIBLE WITH ESCO SV2 ®SV2 COMPATIBLE WITH ESCO SV2 COMPATIBLE COMPATIBLE ® COMPATIBLE WITH RCRC ESCO SV2 RXRXVX RCRXRXRC SV2 VXVXRPHD VX RPHD WITH WITH ESCOESCO ®® SV2 SV2 ®® IBLE WITH TIBLE WITH ESCO SV2® ATIBLE WITHESCO ESCOSV2 SV2 ®

Kg

Lb

RXRX RC RC 35,0

Lb

77

Part#

Cross Ref

FT265 RC

65SV2SD

Part#

DIPPER FT265 77 FT270 35,0 RCRC 112 51,0 DIPPER X ROCK FT270 RC 112 FT275 RC 51,0 X145 66,0 CHISEL

Size

Cross Ref

Size

265

65SV2SD270265 70SV2SD 70SV2SD275270 75SV2SD

FT275 66,0 198 145 FT285 75SV2SD285275 RCRC 85SV2SD 90,0 ROPE-SHOVEL ROPE-SHOVEL EXCAVATOR EXCAVATOR 90,0 198 FT285 RC 85SV2SD 285 EXCAVATOR EXCAVATOR ROCK CHISEL Kg

RCXL

RCXL

HEAVY Part# Ref ROCK Cross CHISEL

Lb

Size

35,0

FT265HEAVY RC 65SV2SD 77 EXCAVATOR

265

51,0

70SV2SD

270

112 FT270 RC EXCAVATOR

FT285 FT285RC RC

RCXL RCXL RX RCRC RX EXCAVATOR EXCAVATOR

ROCK CHISEL HEAVY ROCK ROCKCHISEL CHISEL ROCK DIPPER ROCK DIPPER CHISEL HEAVY EXCAVATOR X X HEAVY CHISEL

EXCAVATOR ROPE-SHOVEL EXCAVATOR ROPE-SHOVEL EXCAVATOR EXCAVATOR

RCXL

275 275

75SV2SD 75SV2SD 85SV2SD 85SV2SD

ROCK CHISEL HEAVY

285 285

Lb

Part#

Cross Ref

RCXL RXRX RXL RXL VXRCXL VXVX EXCAVATOR ROPE-SHOVEL ROPE-SHOVEL

EXCAVATOR

EXCAVATOR EXCAVATOR

Kg

Size

Lb

RCXL RXL EXCAVATOR LH

DIPPER HEAVY

RH

RCXL RXL

Lb HEAVY Part# CHISEL Cross Ref ROCK DIPPER

LH

RH

HEAVY ROPE-SHOVELHEAVY

X

EXCAVATOR EXCAVATOR ROPE-SHOVEL

101,5 223 FT285 RCXL

Size

70SV2SD

270

FT275 RC

75SV2SD

275

198

FT285 RC

85SV2SD

285

DIPPER Kg Lb X 3145 6899

RXL

DIPPER

DIPPER

X HEAVY Part# Pa Kg Kg Lb Part# Cross Ref Size Lb Part# Lb Cross Ref Size Kg KgKg Kg Lb Kg Cross Size Part# Kg LbLb ROPE SHOVEL Cross Ref Size Lb LbPart# ROPE SHOVEL FT265 RX 265 74FT265 34 31 65SV2RXL 65SV2RX 3131 6868 FT26 FT265 VX 65SV2RX F 68 RX 65SV2VX 34 65SV2RXL 55,0 121 265 265 265 55,0 121 FT265 VX 31 7468 65SV2VX FT265 RP FT270 RX 270 54 118 70SV2RX 4545 9999 FT27 70SV2RXL F 99 RX 45 FT270 70SV2VX 54 70SV2RXL FT270 VX 70SV2RX 270 270 270 FT270 VX 99 45 118 70SV2VX 80,5 177 FT270 RP 80,5 60177132 FT27 FT275 RX 275 75SV2RXL 75SV2RX 80 175 FT275 VX 75SV2RX RXVX 60 FT275 132 75SV2VX 60 132 F 75SV2RXL 80 FT275 275 275 275 60 175 132 75SV2VX Cross Ref 100 Size 221 Kg Lb Part# Cross Ref Size Kg285 Lb Part# Cross87 Ref Size FT28 FT285 RX 85SV2RXL 191 85SV2RX RXL FT275 RP FT285 285 285 285 107,0 235 F RXVX 87 191 85SV2VX 87 107,0 221 191 235 100 FT285 VX 87 FT285 85SV2VX 43 191 RX85SV2RXL 65SV2RXL 65SV2RX85SV2RX 265 95 FT265

RXL VXWC RXL RPHD VXWC RPHD ROPE-SHOVEL WC EXCAVATOR

54 118 FT270 RX 70SV2RXL 70SV2RX 270

DIPPER VECTOR DIPPER HEAVY WEAR WEAR DIPPER VECTOR PENET. ROCK PENET. HEAVY X ROCK CAP ROPE SHOVEL HEAVY HDX CAP HD ROCK PENET.

101,5 223 FT285 RCXL

85V2CHD

285

80 175 FT275 RX 75SV2RXL 75SV2RX 275

117,0 257

100 221 FT285 RX 85SV2RXL 85SV2RX 285

RPHD

X

RX

LOADER EXCAVATOR EXCAVATOR LOADER

ROPE-SHOVEL LOADER EXCAVATOR LOADERVECTOR

HD

LOADER

X

VX

DIPPER X

WEAR LOADER

Part#

RXL

Part#

Cross Ref

Size

Kg

Lb

65SV2VX 70SV2VX 75SV2VX 85SV2VX

265 270 275 285

55,0 80,5 92,0

121 FT265 RPHD 65SV2ADHL 177 FT270 RPHD 70SV2ADHL 202 FT275 RPHD 75SV2ADB

Cross Ref

Size

RPHD

X

DIPPER Kg Lb Part# 19 8,7 FT265 WC HEAVY FT270 WC Lb 12,7 28Part#

H

WEAR LOADER CAP

CAPROCK PENET. CAP

EXCAVATOR

FT265 VX FT270 VX FT275 VX FT285 VX

WEARPEN ROCK WEARR CAP HD CAP

285

85V2RXL

EXCAVATOR ADAPTER

WEAR CAP

ROPE-SHOVEL EXCAVATOR

RPHD WCWC WC WC RPHD

FT285 RXL

HD

LOADER

Cross Ref

Size

Kg

Lb

Part#

WC265 WC270 WC275 WC285

265 270 275 285

74,0 85,0 130,0 210,0

163 187 286 462

FT265 FT270 FT275 FT285

Kg

Cross Ref

Lb

Size

Kg

Part#

Lb

65SV2 19 8,7 P Kg 265 LbFT265 W 70SV2 270 Kg Cross R Size 8,7 19 FT270 W 132 37 FT275 WC 75SV2 28 Part# Part# Part# Kg Lb Kg60 Cross Ref Size Size Kg Kg LbKg Lb17,0 Cross Ref Ref Size Kg12,7 LbKg275 Part# Part# Lb Cross Ref Cross Size Part# FWH Lb Cross R Size 75 34,3 Lb 87 21,0 191 46 FT285 WC 285 85SV2 Part# Cross KgLb Lb Part# Cross RefSizeSize 175 FWH750 Cross WC Ref Part# 75 34,3 WC175 12,7 28 Kg Ref Kg Lb Size FT275 W 17,0 37 Part# Part# Part# Cross Ref RX Size Kg Lb Cross Ref Size Kg Lb VX Part# Cross Ref 265 Size Kg Lb R FT265 265 FT265 68 34 65SV2RXL 65SV2RX 65SV2VX FWH FT285 RCXL RXL 285 285 9975Cross 44,8 223 257 101,5 85V2CHD 117,0 85V2RXL Part# Part# Part# Part# Part# Part# Part# Kg74 Lb Cross Ref Size Kg Lb75FT285 Cross Ref Size Kg Lb FT265 RPH Kg Lb Cross Ref SizeSize 31 Kg Lb Cross Ref Kg Lb Cross Ref Size Kg Lb Cross Ref Size Kg Lb Cross Ref 55,021,0 121 175 FWH750 WC FW 34,3 WC175 34,3 17,0 37 185Size WC FT285 FT285 44,8 257FT265 46RPHD 265 VX RXL65SV2VX 265 265 FT265 RC68 65SV2SD RX285 265 VX WC185 31117,0 74 FT265 68 FT265 3485V2RXL 65SV2RXL 65SV2RX 31FWH850 65SV2VX FT265 FT265 RPHD 265 55,0 121 65SV2AD 55,045 65SV2ADHL 1219999 270 FT270 RX 270 265 FT270 VXFT270 1187470SV2SD 5434117,0 70SV2RX 70SV2VX 70SV2RXL ROCK PENET. FT265 RX VX 270 270 285265 FT270 RC 223 FT270 RX 285 VX FT285 RXL 285 265 FT265 VX F FT285 RCXL FT285 RXL 11885V2RXL 99 FT265 54 70SV2RX 270 45 70SV2VX 70SV2RXL 68 65SV2RXL 65SV2RX 31 65SV2VX 99 44,8 WC185 257 68 31 65SV2VX 99 44,8 257 101,5 85V2CHD 117,0 85V2RXL 185 FWH850 WC 21,0 46 FT265 RPHD 265 55,0 121 FT270 RPH 55,0 65SV2ADHL 121 80,5 177 270 FT270 VX 45 99ROCK PENET. 70SV2VX HAMMERLESS PIN 80,5 177 FT270 RPHD 70SV2AD DIPPER FT275 275 FT275 275 HDRX275RX VX 75SV2VX 275 FT275 275177 60 RPHD 75SV2SD 175 FT275 RX 75SV2RXL 75SV2RX 132VXFT275 80 75SV2RX 132FT270 75SV2VX 175 DIPPER 75SV2RXL 80 RC 270 70SV2ADHL 80,560 270107,0 235 FT275 RPHDHAMM 270 VX 70SV2VX VX 70SV2RX 118 45 99 FT270 70SV2RXL 99285 45 FT270 70SV2VX HD Kg Lb Lmm L in 270Part# Size FT275 VXFT270 275 6054RC132 75SV2VX 75SV2AD VX RPHD 285 FT285 RX 85SV2RXL 85SV2RX 285 87 191 100 221 FT285 85SV2VX70SV2ADHL 85SV2SD FT275 RPH HEAVY 107,0 FT270 270 23580,5 177 177 FT285 VXFT285 285 FT285 RX 2 117 4,6" FT6165 PN-HL 87 265 191 80,5 100 221 X 85SV2VX 85SV2RXL 85SV2RX0,8285 PIN FT275 RPHD 275 FT275 VX 275 FT275 RX 275 75SV2ADB75SV2VX 107,0 VX 75SV2RX 60 132 175 75SV2RXL 60 FT285 132VXFT275 75SV2VX 285 1,2 3 131 5,2" 275 FT270 PN-HL 235 270 8780 191 85SV2VX

ROPE SHOVEL

PN-HL

265 270 275

ROPE SHOVEL

ASSEMBLY

LH RXL RXL LH WC WC WCWC

PN-HL RH WC PN-HL RH

WEAR ROPERXL SHOVEL SHOVEL ROPEWEAR SHOVEL FT275 275 75SV2ADB 107,0 CAP FT285 VX RPHD 285WC 285 ROPE 87 191 235 85SV2VX WC LH RH WEAR WEAR CAP HEAVY EXCAVATOR ROPE-SHOVEL Kg LbCAP DIPPER Part#WEAR Cross Ref EXTFT5985 Size Kg Lb WEAR Part# Cross Ref Size CAP LH RH

285

85V2CHD

FT270 RC

145

90,0

RPHD RPHD RX RX LH SHOVEL LOADER ROPE LH RCXLLOADER RXL WC ROPE-SHOVEL RXLWC

FT285 RX RC 85SV2RXL 285 285 FT285 90,0100198 85SV2SD CHISEL 221 ROCK 85SV2RX

Kg

112

66,0

EXCAVATOR

RX

Kg Lb Cross Size Kg Lb Cross Ref Ref 285 Size Part# FT285 RCXL 65SV2RX 223 RX 85V2CHD 265 35,0 77 74 FT265 34 101,5 65SV2RXL FT270RX RC 70SV2SD 270 112 51,0 VECTOR 265 FT265 RC FT265 265 112 51,0 77 35,0 65SV2SD 74 34 65SV2RXL 65SV2RX FT285 RCXL 285 223 101,5 85V2CHD FT270 RX 270 54 118 70SV2RXL 70SV2RX VECTOR FT275CHISEL RC 75SV2SD 27566,0 145 X 145 ROCK 66,0 FT270 RC 70SV2RXL RX 270 51,0 70SV2SD 118 54 70SV2RX X 112 FT275FT270 RX 75SV2RXL 275270 175 75SV2RX 80 90,0 198 HEAVY 90,0 198 FT285 RC 85SV2SD 285 FT275 RC 75SV2RXL RX 66,0 75SV2SD 175 75SV2RX 80145 FT285FT275 RX 85SV2RXL 285275 275 221 100 85SV2RX

VX VXRCXL RCXL EXCAVATOR EXCAVATOR

51,0

CHISEL DIPPER X ROCK DIPPER DIPPER DIPPER ROCK CHISEL VECTOR VECTOR HEAVY X DIPPER HEAVY ROPE SHOVEL HEAVY HEAVY X X VECTOR X

RX

ROCK CHISEL

RX

ROPE-SHOVEL EXCAVATOR LOADER EXCAVATOR ROPE-SHOVEL EXCAVATOR EXCAVATOR CHISEL RC ROCK

Part# Kg Lb Cross Ref Size Part# Kg Part# Lb Cross Ref Kg Lb Cross Ref Size Size EXCAVATOR RC 65SV2SD 265 35,0 77 FT265 Part# Part#

Kg

RCXL

ROCK

EXCAVATOR EXCAVATOR 265 FT265 RC65SV2SD 77 35,0 65SV2SD FT265 265 RC 74FT265 65SV2RXL 65SV2RX 77 35,0 RX RX 265 265 343474 65SV2RXL 65SV2RX 270 FT270 RC70SV2SD 112 51,0 70SV2SD FT270 270 RC 112 51,0 118 70SV2RX 70SV2RXL FT270 RX RX 270 270 5454118 70SV2RX 70SV2RXL RC 75SV2SD 275 66,0 145 FT275 RC 275 175 75SV2RXL 75SV2RX 66,0 145 75SV2SD FT275 FT275 RX RX 275 275 75SV2RXL 75SV2RX 8080175 Lb Part# CrossRC Ref Size 85SV2SD Kg Lb 285 Part# FT285 90,0Kg 198 FT285 RXRCRX 285 285 RC 285 221 100 85SV2RXL 85SV2RX 221 100 85SV2RXL 90,0 198 85SV2SD 35,0FT285 FT265 65SV2SD 26585SV2RX 77 SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

Kg EXCAVATOR

35,0 FT265RC RC 77 FT265 35,0 77 51,0 FT270RC RC 112 FT270 51,0 112 66,0 FT275RC RC 66,0 145 145 FT275

RC

VECTOR

VECTOR X ROCK PE X HD

X

EXCAVATOR ROPE-SHOVEL ROPE-SHOVEL EXCAVATOR EXCAVATOR EXCAVATOR

LbPart#Part# Cross Cross RefSizeHEAVY Size Kg Kg Cross Size Kg LbLb CHISEL RefRef Part# Kg Lb Cross Ref Size

Cross Ref Size Cross Ref Size 265 65SV2SD 65SV2SD 265 70SV2SD 270 70SV2SD 270

SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

ROCK CHISEL

Part# Part#

KgKg LbLb

SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

® SV2® is aSV2 registered trademark Esco Corporation.

Manufacturer's names, descriptions, pictures andpictures part numbers are used for reference purposes only.purposes is a registered oftrademark Esco Corporation.

Manufacturer's names, descriptions, and part are used for reference only.

SV2® is trademark a of registered of Esco Corporation.

Manufacturer's names, descriptions, pictures andnumbers part numbers are used for reference purposes only.

SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

RC

X

ROPE-SHOVEL EXCAVATOR EXCAVATOR ROPE-SHOVEL EXCAVATOR EXCAVATOR

SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

EXCAVATOR EXCAVATOR

SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

RC RC

SV2® is a registered trademark of Esco Corporation. Manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

SV2 SV2®® is is aa registered registered trademark trademark ofdescriptions, Esco Esco Corporation.

Corporation.

Manufacturer's names, descriptions, descriptions, pictures and and part part numbers numbers are are used used for for reference reference purposes purposes only. only.

SV2® is a registered trademark of Esco Corporation.

Manufacturer's names,of pictures Manufacturer's and part numbersnames, are used for referencepictures purposes only.

ROCK CHISEL ROCK ROCK EXCAVATOR CHISEL CHISEL

VECTOR DIPPER X X DIPPER VECTOR

X CHISEL

EXCAVATOR

RCXL 90,0 90,0 198 198

®

DIPPER ROCK ROCK X CHISEL DIPPER

EXCAVATOR

RC

®

®

Futura T2 er kompatibelt med Esco SV2 ® systemet.

Tennene er tilgjengelige i 6 forskjellige størrelser 265, 270, 275 og 285, og følgende ROCK profiler er CHISEL ROCK tilgjengelige: RC, RX, VX, RHPD, RXL og CHD. CHISEL

DIPPER1,2 3 147 5,8" ROCK CHISEL HEAVY 285 VX HEAVY 85SV2RX 100 221 85SV2RXL DIPPER 87 FT285 191 RXFT285 85SV2VX 1,8 4 157 6,2"

FT275 PN-HL

275

FT285 PN-HL

285

EXTRACT. TOOL

HEAVY CAP 43 95 FT265 RX 65SV2RXL 65SV2RX 265

X

ROPE-SHOVEL ADAPTER

EXCAVATOR 54 118 FT270 RX 70SV2RXL 70SV2RX 270

Kg Lb Lm

WEAR CAP

CAP

WEAR CAP

107,0 235

WEAR FT285 RXL 85V2RXL Part# CAP Kg Lb Cross R

285

117,0 257

Kg

Lb

8,7

19

WC

0,8 2 1 1,29 3 1 1,2Cross Part# 3 Re 1 WEAR FT265 WC1,8WC265 CAP 4 1

ADAPTER Size 80 175 FT275 RX 75SV2RXL 75SV2RX 275 12,7 28 FT270 WC WC270 Part# Part# Lb Cross Lb Cross RefLb Ref Size EXCAVATOR Part# Part#CrossKgCross Lb CrossRef Ref Size Size Kg Lb KgPart# KgEXCAVATOR Lb Ref Part#SizeCross Ref Size Size 34,3 75 FWH750 WC WC175 175 17,0 37 FT275 WC WC275 Part# 100 221 FT285 RX 85SV2RXL 285 85SV2RX OEM Kg Lb Bº Size Part# Kg Lb Kg Part# Cross Ref Size Kg Lb Part# Kg Part# Lb Cross Ref Size Lb Cross Ref RCXL ADAPTER Part# 99 FWH850 WC WC185 185Size 44,8 101,5 223 FT285Size 85V2CHD 285 117,0 257 FT285 RXL 85V2RXL 285 ADAPTER 21,0 46 FT285 WCEXTRA WC285 Lb Bº FT265 68 5SV2SD 31 Kg68 Part# FT265 RPHD 265 Kg Lb Cross Ref Size 55,055,0 65SV2ADHL 121 265 265 265OEM FT265VX VX 65SV2VX D 31 65SV2VX 265 RPHD 265 65SV2ADHL 3858W-65SV2 121 140 FT265 FT265-7075 64 8,7 19 FT265 WC 2,8" 70 43 95 FT265 140 FT270 FT265-7075 270 270 VX 64 3858W-65SV2 30 RX 65SV2RXL 65SV2RX 265 99 0SV2SD 45 70SV2VX 2,8" 70 Part# FT265 WC 265 Kg Lb Cross R Size 8,7 WC265 19 FT270 VX Part# 75 3"70SV2ADHL D 270 45Kg 99 70SV2VX 270 OEM 80,5 HAMMERLESS 30 123 FT265-7075 LH, FT265-7075 RH FT270 RPHD 270 56 FT270 177 12,7 28 Part# Lb Bº Size OEM Kg Lb Bº Size 3" FT265-7075 75PENET. Part# Part# 270 Kg Lb177FT270 Cross R Size 270 Kg WC Lb WC270 Cross Ref Size PIN Kg LbWC 123 FT270 270 LH, FT265-7075 RH ROCK PENET HD WEAR ROCK 56 70SV2ADHL 80,5 EXCAVATOR RXRPHD 54 118 70SV2RXL 70SV2RX EXCAVATOR VX 60 132 75SV2VX 5SV2SD 275 FT270 12,7 28 Part# Kg132 LbFT275 Cross Ref275 Size Kg 64Lb141 Part# Cross Ref Size FWH750 ROCK PENET. 75257 34,3 FT265-80 FT275 VX 275 ROCK PENET. 5898W-65SV2 223 101,5 FT285 RCXL 85V2CHD 285 117,0 FT285WC RXL WC175 85V2RXL175 285 60 75SV2VX D 275 17,0 37 FT275 WC ROCK PENET. ROCK PENET. Part# 140 141 FT265-80 140 FT265-7075 Kg Lb Cross Ref 285 Size 5898W-65SV2 6464191 3858W-65SV2 HD 3,1" 302,8" 80 265 64 3858W-65SV2 FT265-7075 175 FWH750 WC FT275 RPHD 275 265 FT265 WC 75 34,3 WC175 2,8" 8,7 19 70 75SV2ADB 235 107,0 70 ADAPTER 8,7 WC265 19 80 FT275 RX 75SV2RXL 75SV2RX 175 275 FT275 WC 275 RPHD LOADER CAP FT285 VX 17,0 37 WC275 87 85SV2VX 5SV2SD 285 ADAPTER HD 80 3,1" 26557 3030 30 HD FT265-80 LH,Cross FT265-80 RH 44,8 Kg 185 R Size 21,0 Kg WC FT285 RCXL 85SV2VX 285LH 285 FT275 RPHD 275 FT285Part WC 99 FWH850 WC185 Cross 223 257 85V2CHD 117,0 85V2RXL 75SV2ADB 235 107,0 46Lb Lmm Part# RH125FT285 Part# Lb FT285 VX 285 Lb RXL R Size 87101,5 191 D 285 3" 75 3" HD 125 FT285 HD FT265-80 LH,LH, FT265-80 RH 44,8 123 12399Kg75 FT265-7075 LH, 185 FT265-7075 RH 5657 56100 FT265-7075 RH 270 FT270 WC FWH850 WC RXLFT265-7075 285 12,7 28 FT285 WC 285 12,7 WC270 28 WC185 257 117,0 85V2RXL 21,0 46 WC285 FT285 RX 85SV2RXL 221 285 85SV2RX 141 FT265 64 6803W-65SV2 WEAR 2 117 FT6165 P 0,8 Part# 141 FT265 Part# Kg Lb Lb Part# Cross Ref 6803W-65SV2 Size Size Kg Lb 307590 Cross Ref Size 175 Cross Ref 3,5" 175 275 FWH750 WC WEAR FWH750 WC 75 34,3 WC175 141 141 34,3 WC175 FT265-80 6464Kg 5898W-65SV2 64 5898W-65SV2 FT265-80 FT275 WC 17,0 37 17,0 37 WC275 FT270 PN 3 131 1,2 3,5" 903,1" FT265 LH, FT265 RH 57 3030 80 30125 80 3,1" 265 CAP265 DIPPER HAMME 125 FT265 LH,LH, FT265 RH CAP 57WEAR 147 FT275 125 FT265-80 FT265-80 RH 57117,0 125 44,8 FT265-80 LH, RH185 57117,0 FWH850 WC FT285 RCXL FT285 RXL 285 285 285 FWH850 WCFT265-80 FT285 RXL 99 46 44,8HAMMERLESS 223 101,5 85V2CHD FT285 WC WC185 46PN WC185 223 FT285 RCXL 85V2CHD 285 257 101,5 HEAVY 85V2RXL EXCAVATOR 21,0 WC285185 285 1,2 3 21,0 231 99 FT27085V2RXL 105257 6803W-70SV2 CAP HEAVY PIN FT285 PN 1,8 4 157 VECTOR ROCK PENET. 231 FT270 105 6803W-70SV2 EXCAVATOR 3,5" ADAPTER 64 14185 187 30 90 FT265 6803W-65SV2 WEAR 64 141 30 90 3,5"FT265 6803W-65SV2 PIN FT270 LH, FT270 RH 30 HD 90 3,5" FT270 LH, FT270 RH 30 90 3,5" X ADAPTER 85 187 270 EXTRACTION TOO WEAR Part#229 125 FT265 LH, OEM Size FT265 RH 57 125 57 FT265 LH, FT265 RHKg Lb Bº CAP 270 FT270-100 104 5897W-70SV2 HAMMERLESS FT270-100 104 229 5897W-70SV2 3,9" 30 100 LH RH FT265-7075 Kg Lb Lmm 64 140 CAP 2,8" 70105 23192 202 3858W-65SV2 FT270 105 231 30 100 3,9"FT270 6803W-70SV2 WEAR FT270-100 6803W-70SV2 LH, FT270-100 RH 30 LH RH Part# 75 3" FT265-7075 Size Kg Lb Lmm PIN LH, FT265-7075 RH 30 90 3,5" FT270-100 LH, FT270-100 56 123 RH 3,5" 30 90 92 202 0,8 2 117 187 FT270 LH, FT270 RH64 141 187 FT270 LH, FT270 RH FT275 85 CAP 151 332 5898W-65SV2 5897W-75SV2 85151 FT265-80 EXTFT5985 332 FT275 FT6165 PN-HL 265 30 80 3,1" 270 5897W-75SV2 2 117 0,8 30 100 3,9" 265 270 FT265-80 LH, FT265-80FT270-100 RH FT25 LH, FT275 RH 1,2 3 131 57 125 30 100 3,9"FT270-100 229 Lb 130 286 229 104 5897W-70SV2 104 5897W-70SV2 Pa Part# Part# Kg Bº Part# Cross Size Kg Lb Cross Kg Cross Ref Kg FT265 Lb Cross Ref Size Part# Part# FT25RH LH, FT275 Cross Ref Ref Size Lb Cross Ref Ref Size Size Kg 286 Lb100 3,9" Cross RefRHSize Size 275 1,2 3 131 FT270 PN-HL 270 Part# 30 3,9" 30 100 64 141 6803W-65SV2 LH 130 LH Kg RH 1,2 3 147 Size Kg Lb Lmm 30 RH 90 3,5"275 FT275-120 151LH,332 6810W-75SV2 202 FT270-100 LH, 6810W-75SV2 FT270-100 202 FT270-100 LH,265 FT270-100 RH EXCAVATOR 92151 92 Kg 125 FT265 FT265 RH 57 Size 332 100 FT275 FT275-120 FT275 PN-HL 275 451 Part# FT265 WC 1,2 3 147 4,7" 30 120 Part# Part# 265 Part# FT265 VX 8,7 WC265 19 Ref SizeSize265 Lb Lb Ref Lb Cross Ref Size 68 V2RXL 31 65SV2VX s Ref65SV2RX Cross RefSize Size Kg Lb Cross Ref Lb Cross Ref Size Part# Cross Ref Size Kg Kg Lb Part# Cross Ref Size Kg Lb Part# Cross Ref Size Kg Lb Part# Cross Ref Size 265 265 Kg KgLbKgEXCAVATOR FT265 VXCross FT265 RPHD 265 68 Part# V2RXL 65SV2RX 31 65SV2VX 55,0 65SV2ADHL 121 FT265 RPHD 265 55,0 65SV2ADHL 121 30 1,8 4 157 4,7"FT275 30 120 286 FT275-120 LH, FT275-120 RH FT270 105 231 6803W-70SV2 130 FT6165 PN-HL 265 Part# ADAPTER 2 117 0,8 Kg Lb Cross R Size 332 332 FT275 151 5897W-75SV2 151 5897W-75SV2 3,5" 30 992 3,9" FT275 FT275-120 LH, FT275-120 RH9012,7 130 286 FT270 270 1,8 4 157 FT285 PN-HL 285 WC270 2830 270 FT270 VX 70SV2RX 45 70SV2VX V2RXL 3,9"RPHD 30 FT270 LH, FT270 RHWC WC 100 3,9" 100 265 FT265 WC 85 187 270 270 31 316831ADAPTER FT270 VX65SV2VX 265265270 FT265 VX65SV2VX WC265 19 265 FT265 VX 99 70SV2RX 45 70SV2VX V2RXL 121 19 FT265 VX 265 265 55,0 55,0 FT265 RPHD 65SV2ADHL 265270 8,78,7 FT265 265 74,0 163 FT265 65SV2FT270265 68 5SV2RX 6899 L 65SV2RX 65SV2VX 416 FT285 FT265 265 FT265 RPHD 265 130 189 65SV2ADHL 121 55,0 65SV2ADHL 121 270WC265 PN-HL 270 FT270 RPHD 1,2 3 131 Part# KgFT285 Bº 70SV2ADHL 80,5 177 ross Ref Size Kg Lb Cross Ref Size 286 FT25 LH, FT275 RH270 286 LH, FT275275 RH 6810-85SV2 FWH750 WC FT270 RPHD 75 34,3 WC175 70SV2ADHL 80,5 177 Part# 120 FT285 Kg130 Lb416 Cross R 175 Size 506 6810-85SV2 189 WCFT25 4,7"WC275 30 104 229 120 285 5897W-70SV2 17,0 FT270-100 37 FT275 FT275 VX 275 275 30 100 3,9" 132 75SV2VX V2RXL 75SV2RX 275 270 FT270 WC 12,7 WC270 FT275 VX70SV2VX 275 275 45 45994560 4,7" Part# 30 EXTRACT 30 120RPHD 2828 FT270 VX 270 270 80,5 Kg177 FT270 70SV2ADHL 270 12,7 FT270 WC WC270 270 85,0 187 FT270 70SV2FT275270 285 OEM Lb Bº Size 60 132 75SV2VX V2RXL 75SV2RX 359 FT285 LH, FT285 RH 270270275 FT270 VX70SV2VX 163 270 FT270 VX 99 0SV2RX 99 70SV2VX L 70SV2RX 202 FT270-100 LH, FT270-100 RH 92 PN-HL 275 1,2 3 147 EXTRACTION TOOL 332 FT275-120 151 451FT2851 6810W-75SV2 1.113 4,7" 359 FT285 LH, FT285 RH 151 332 6810W-75SV2 185 FWH850 WC FT285 RXLCross 285 285 163 285 99 44,8 WC185 257 5V2CHD 117,0 85V2RXL Part# 21,0 46 FT285 WCFT275-120 WC285 OEM Kg Lb Bº Size EXCAVATOR EXCAVATOR Part# FT270 RPHD 270 FT270 RPHD 270 ef Size Kg Lb Ref Size 70SV2ADHL 80,5 177 FT275 RPHD 275 70SV2ADHL 80,5 177 175 FWH750 WC 75SV2ADB 235 107,0 75 34,3 WC175 FT275 RPHD 275 30 4,7"FT265-7075 120 RPHD FT285 VX 285 FT27530 4,7" WC 75SV2ADB 235 107,0 1205897W-75SV2 FT275 WC WC275 275 87 191 85SV2VX V2RXL 85SV2RX 17,0 92,0 64 17,0 130,0 286 132 VX 275 275 202 FT275 75SV2ADB 275 151 332 30 100 3,9" 3737 FT275 WC275 275 FT275 75SV2FT285275 FT285 VX75SV2VX 285 285 60 60 140 30 87FT275 191 85SV2VX V2RXL 85SV2RX 3858W-65SV2 FT275 VX75SV2VX 275275285 FT275 VX 275 PN-HLKg285 132 5SV2RX 60140 132 75SV2VX L 75SV2RX 1,8 4 157 992 286 30 70 2,8" FT275-120 LH, FT275-120 286 LH, FT275 RH FT275-120 LH, FT275-120 RH 130ADAPTER 130 FT25 Part# OE3 Bº ADAPTER 130 286 RH FT265-7075 64 3858W-65SV2 2,8" 75 3"Part# 185 FWH850 WC FT285 RXL 285 Size FT285 WC 275WC285 285 99 Lb 235 44,856 WC185 257 D 285 117,0 85V2RXL 21,0 46 123 FT265-7075 LH, 87 191 21,0 210,0 285 FT285 WC FT285 285 451 100 FT275 CLH IN-75 WC285 85SV2 Kg FT285 Lb 70 VX Part# 85SV2VX Cross Ref Kg107,0 Size Part# Size Kg 462 Lb Part# Cross Ref Size Cross RefFT265-7075 Kg 46 Lb 6810W-75SV2 Cross Ref 285 30 FT275 RPHD 275332 FT275 RPHD 275RH189 75SV2ADB 75SV2ADB FT275-120 151 FT285 VX 285285 RH 107,0 285285 FT285 VX 85SV2VX 416235 1 FT285 3" 87 191 5SV2RX FT285 75 191 85SV2VX L 85SV2RX 506 6810-85SV2 189 6810-85SV2 FT265-7075 LH, FT265-7075 WEAR 30 30 120 4,7" 416 5687123 HAMMERLESS WEAR 4,7"FT265-80 30 30 120 28530 120 4,7" 285 992 3,9" FT275 CRH IN-75 FT275-120 LH, FT275-120 RHWC 64 141121 5898W-65SV2 130 286 68 163 19 FT265 VX FT265 FT265 65SV2 265 31 65SV2VX 265 55,0 FT265 RPHD 65SV2ADHL 265 8,7 WC265 265 74,0 EXTRACTION TOOL Part#LH, FT285 RH Part# 5898W-65SV2 265 OEM Kg Bº30 80 3,1" FT285 Size 359 359 OEM Kg 141 Lb BºCAP Size FT285 LH, FT285 RH 163Lb 163 FT265-80 PIN 6810-85SV2 64 CAP 416 120 FT2851.113 CLH IN-85S4 FT285 506 189RH LH, FT265-80 57 125177 FT270 FT265-80 30 30 120 4,7" 12,7 285 WC270 3,1" VX 30 80FT270 265 99 187 28 FT270 WC FT270 70SV2 270 45 125 70SV2VX 270 80,5 RPHD 70SV2ADHL 270 270 85,0 WEAR WEAR HAMMERLESS 1.113 4,7" 359 FT285 CRH FT285 LH, FT285 RH IN-85S 163 FT265-80 LH, FT265-80 RH 57 140 FT265-7075 6464 3858W-65SV2 64 140 3858W-65SV2 70 2,8" FT265-7075 70 2,8" WEAR 141 FT265 6803W-65SV2 WEAR 30 30 FT275 VX 130,0 286 60 CAP 92,0 17,0 37 PIN 132 275 FT275 WC 275 FT275 75SV2 75SV2VX 202 FT275 RPHD 75SV2ADB 275 WC275 275 CAP 3,5"FT265-7075 30 75 90 3" 75 3" FT265 64 123 LH, FT265-7075 RH 12330 90 FT265-7075 6803W-65SV2 LH, FT265-7075 RH 5657 H 56 141 CAP 125 FT265 LH, FT265 RH Part#WC285Size 285 Kg Lb Lmm CAP 3,5" VX 210,0 87 21,0 191 FT285 285 46 FT285 WC 462 FT285 285 85SV2 85SV2VX FT265 LH, FT265 RH 57 141 FT265-80 WEAR 141 FT265-80 5898W-65SV2 64 125 5898W-65SV264WEAR 231 FT270 105 6803W-70SV2 HAMMERLESS 3,1" 265 0,8 2 117 FT6165 PN-HL 265 30 80 3,1" 2653030 80 3,5" 90PIN FT270 105 231 6803W-70SV2 CAP FT265-80 FT265-80 RH Part# FT265-80 RH 57CAP 187 FT270 LH,LH, FT270 RH Lb Lmm 57 12530 90 3,5" FT265-80 LH, 85125 FT270 PN-HL 270 Size PN-HL 1,2 3Kg131 270 187 FT270 LH, FT270 RH 85 229 L in FT270-100 141 FT265 104 5897W-70SV2 FT265 6803W-65SV2 Kg 64 Lb Lmm Part# Size 64 141 6803W-65SV2 270 FT275 PN-HL PN-HL 275 265 FT6165 1,2 3 2 117 0,8147 Part# Kg Cross 3,9" 1003,5" 90 Part# PN FT270-100 Kg3030Lb Lb Cross Ref Ref Size Size HAMMERLESS ASSEMBLY 104 229 30 90 3,5" 5897W-70SV2 202 FT270-100 LH, FT270-100 RH FT265 LH, FT265 RH 5792125 FT285FT270 PN-HLPN-HL 285 270 57 12530 100 3,9" FT265 LH, FT265 RH 1,8 4 3 131 1,2157 117 4,6" FT265 FT6165 265 WC 265 FT270-100 LH, FT270-100 RH 0,8 2 8,7 WC265 19 92 202 WC PN-HL 265 8,7 WC265 332 19 FT265 FT275 151 5897W-75SV2 231 FT270 Part# 231 FT270 Cross 6803W-70SV2 RR Size 105 Kg 6803W-70SV2 Part# Kg 30Lb Lb 3,5" Cross Size 1,2105 1,2 3 147 FT275 PN-HL 275 3,9" 30 100 HAMMERLESS PIN FT270 WC 270 FT275 12,7 WC270 28 3 Kg 131 5,2" FT270 PN-HL 270 Part# 151 332 5897W-75SV2 Part# 3,5" 30 90 Lb Cross Ref Size FT270 WC 270 Kg Lb Cross Ref Size 90 12,7 WC270 28 Part# Kg Bº FT25 LH, 130 286 EXTRACTION TOOL 3,9" FT270 LH, FT270 RH FT270 LH,FT275 FT270RHRH275 18730 100 Size 85 34,3 Cross Size 175 WC Part# 75 WC175 275 1,8 4 157 FT285 PN-HL 285 Size OEM Kg Bº Cross Ref RefOEM Size 175 1,2853 187 FWH750 WC FT275 WC 286 FT25 LH, FT275 RH 75 FWH750 34,3 WC175 37 WC275 17,0 130 FT275 WCWC 270 3719FT265 WC275 17,0 270 147 5,8" FT275 PN-HL 275275 WC 265265 WC265 19 332 100 FT275 CL FT275-120 8,7Lmm WC265 151 451 6810W-75SV2 275 Kg8,7 inFT265 Part# Size 229Lb 30 FT270-100 229 FT270-100 104 5897W-70SV2 07585V2RXL 104 5897W-70SV2 3858W-65SV2 30 4,7" 120 LFT285 185 FWH850 WC 285 Part# Part# WC 285 WC185 332 100 FT275 CLH FT275-120 Kg Lb 30 Cross R Size 46 WC285 21,0 Kg44,8 Lb99 Cross R Size 151 451 IN-75SV2L 6810W-75SV2 185 FWH850 WC 285 FT285 WC 285 99 44,8 WC185 85V2RXL 46 WC285 21,0 3,9" 30 100 3,9" 1004,7" 992 3,9" FT275 CR 286 WCWC 270270 FT275-120 LH, FT275-120 RH FT270 12,7 WC270 12,728 WC270 28FT270 1,892130 40,8 157 6,2" FT285 PN-HL 285265 30 30 120 275 202 LH, FT270-100 RH 075 LH, FT265-7075 Size RH 130 202 FT270-100 FT270-100 RH 2 117 4,6" FT270-100 FT6165 PN-HL 92 286 EXTRACTION TOOL 992 3,9" FT275 CRH IN-75SV2R FT275-120 LH,LH, FT275-120 OEM RefRef SizeSize oss 175175RH WCWCWC175 FWH750 34,3 34,375 75 FWH750 WC175 416 120 FT285 CL FT285 506 6810-85SV2 189 WCWC WC275 275275 FT275 17,0 17,037120 37FT275 WC275 0 5898W-65SV2 3323 30 4,7"FT275 30 285 332 FT275 151 5897W-75SV2 151416 5897W-75SV2 120 FT285 CLH IN-85SV2L1 FT285 131 5,2" 270 1,2 FT270 PN-HL 506 6810-85SV2 189 HAMMERLESS 265 EXTRACT. 1.113 4,7" FT285 CR 359 FT285 LH,WC285 FT285 RH 285285 3858W-65SV2 30 46 100 HAMMERLESS 163 3,9" WCWCWC185 100 4,7" 30 FWH850 285285 RH 120 285 FWH850 FT285 WCWC 44,8 FT285 99 44,8993030 WC185 185185 V2RXL 21,0 21,0 463,9" WC285 0RXL LH, FT265-80 Part# 285 OEM Kg Bº Size Kg BºCRH IN-85SV2R1 FT25FT275 LH, FT275 286 FT25LH, LH,FT285 FT275 1.113 4,7" FT285 130 FT285 RHRH 130359 163 1,2286 3 147 5,8" PN-HLRH 275 PIN PIN TOOL , FT265-7075 RH 275 275 6803W-65SV2 332 10 FT275-120 100 FT275 CLH IN-75SV2L FT275-120 151 451 6810W-75SV2 151 332 451 6810W-75SV2 1,8 4 157 6,2" FT285 PN-HL 285 5898W-65SV2 30 30 120 4,7" 30 30 120 4,7" 275 H, FT265 RH 9 HAMMERLESS 265 130 286 HAMMERLESS 992 3,9 FT275-120 LH, FT275-120 RH 992 3,9" FT275 CRH IN-75SV2R FT275-120 LH, FT275-120 RH130 286 Part# T265-80 RH Size Kg Lb Lmm Part# Size Kg Lb Lmm 6803W-70SV2 PINPIN 416 12 FT285EXTRACT.6810-85SV2 120 FT285 CLH IN-85SV2L1 FT285 506 506 6810-85SV2189EXTFT5985 189 416 6803W-65SV2 4,7" 30 285 FT6165 PN-HL 265 30 30 120 4,7" 285 28530 120 0,8 22 117 H, FT270 RH FT6165 PN-HL 265 117 0,8 1.113 4,7 359 FT285TOOL LH, FT285 RH 1.113 4,7" FT285 CRH IN-85SV2R1 FT285 LH, FT285 RH 270 163EXTRACT 163 359 65 33 131 1,2 00 RH 5897W-70SV2 FT270PN-HL PN-HL 270 270 131 FT270 1,2TOOL Part# Part# 275 SizeSize Kg Lb Lmm Lmm FT275 PN-HL 1,2 33 Lb 147 00 LH, FT270-100 RH 6803W-70SV2 FT275 PN-HL 275 1,2Kg 147 9 FT285 PN-HL 285 1,8 157 FT6165 PN-HL 265265 FT6165 PN-HL 244 2 117 0,8 70 RH 5897W-75SV2 FT285 PN-HL 285 117 0,8 1,8 157 270 Part# Size OEM FT275 RH FT270 PN-HL 270270 Kg Bº FT270 PN-HL 3 131 1,2 3 131 1,2 5897W-70SV2 275 EXTRACTION TOOL EXTRACTION TOOL 20 6810W-75SV2 PN-HL 275275 451 30 100 FT275 CLH IN-75SV2L 275 FT275 PN-HL 1,2 3 3 147147FT275 FT270-100 RH 1,2 3,9" FT275 CRH IN-75SV2R 20 LH, FT275-120 RH PN-HL 285285 992 FT285 PN-HL 1,81,8 4 4 157157FT285 5897W-75SV2 FT285 CLH 506 Kg 120 6810-85SV2 Part#IN-85SV2L1 OEM 5 RH 30 Bº 285 285 Size 275 1.113 4,7" FT285 CRH IN-85SV2R1 H, FT285 RH EXTRACTION TOOL EXTRACTION TOOL 100 FT275 CLH IN-75SV2L 451 6810W-75SV2 30 275 992 3,9" FT275 CRH IN-75SV2R 9 FT275-120 RH 120 FT285 CLH IN-85SV2L1 506 6810-85SV2 30 285 285 1.113 4,7" FT285 CRH IN-85SV2R1 85 RH

ross Ref ef Size Size

66,0 145 FT275 RC 75SV2SD 275 Part# Cross Size Kg Kg Lb LbPart# Cross RefRef Size 90,0 198 RCPart# 85SV2SD 285 Size Kg74 FT285 Lb Cross Ref FT265 265 34 VX 65SV2RXL 65SV2RX FT265 RX RX 265 34 74 65SV2RXL 65SV2RX FT265 RC 65SV2SD 265 77 FT270 270 118 5435,0 70SV2RX 70SV2RXL FT270 RX RX 270 54 118 70SV2RX 70SV2RXL VECTOR X VECTOR 51,0 FT270 RC 70SV2SD 270 FT275 RX 75SV2RXL 175 112 75SV2RX 275 80 VECTOR RX 275 VECTOR 75SV2RXL 75SV2RX 80 175KgFT275 VECTOR VECTOR Part#RC Cross Lb Ref 285 Size X66,0 275 LOADER FT285 RX 221 145 100 85SV2RXL75SV2SD 85SV2RX XXRXFT275 285 100 221 FT285 85SV2RXL 85SV2RX X X FT285 RCXL 85V2CHD 285 101,5 90,0 223 198 FT285 RC 285 85SV2SD Part# Kg DIPPER Lb Cross Ref Size

VXVXVXVX LOADER EXCAVATOR EXCAVATOR EXCAVATOR EXCAVATOR RXL RXL ROPE-SHOVEL VX VX ROPE-SHOVEL LLOADER OADER

X

X

LHWC

LHWCWC

CLH

CLH

XRPHD RPHD RPHD RPHD RPHD LOADER LOADER LOADER LOADER WCLOADER WC LHRPHD RPHD LLOADER OLH ADER Kg Kg

X

X

WC WCWCCLH PN-HL

X

X

LH

X

RH

CLH

RH

RH

PN-HLCLH ASSEMBLY

Size Size

RH

CAST

EXTFT5

CAST

99

9 OEM OEM

CRH

9

EXTFT5985 EXTFT5985

Part# Part#

CRH PN-HL RH CRH CASTPN-HL CORN

CAST CORNERS

PN-HL EXTFT5985 EXTFT5985 CRH PN-HL PN-HL EXTFT5985 RHRH EXTFT5985 CRH CAST CORNERS CAST CORNERS

Kg Kg Bº Bº

EXTFT

CRH CRH EXTFT5985 CLH ASSEMBLY ASSEMBLY CRHCAST CORN CRH CAST CORNERS

RH

CRH CRH CAST CORNERS

PN-HL

EXTFT5985

EXTFT5985 EXTFT5985

12

PN-HL

RH

CAST CORNERS

EXTFT5985

CRH

CLH

PN-HL XX CLH

PN-HL

RH

CLH PN-HL PN-HL

X WC WC CLH WCLH WC WC CLH WC LH

+60% TO OTHER 500 BRINELL BORON STEE +60% +60%

SLITEPLATER

Nordic Roads AS leverer sliteplater til de fleste hjullastere både som standard og kundetilpasset. Sliteplatene leveres i 500, 550 og 600 HB.

MECHANICAL PROPERTIES

MECHANICAL PROPERTIES MECHANICAL HARDNESS PROPERTIES RESILIENCE

THICKNESS

mm THICKNESS THICKNESS mm

8,0 - 65,0 mm

HBW HARDNESS HARDNESS HBW

CVL RESILIENCE RESILIENCE CVL

540 - 575 HBW 30J / -40º CVL

8,0 - 65,0 540 - 575 30J / -40º MECHANICAL 8,0 - 65,0 540 -PROPERTIES 575 30J / -40º

• De fleste skuffer • Nedløp • Matere • Siloer osv

FUTURA 550 is an abrasion resistant FUTURA is an abrasion steel with a550 nominal hardnessresistant of 550 FUTURA 550 is an abrasion resistant steel with a nominal hardness of 550 HBW. Typical applications are composteel with a nominal hardness of 550 HBW. Typical applications are components with abrasion resistance.

HBW. Typical applications are comporesistance. nents with abrasion resistance.

nents abrasion • Lages etterwith kundens ønske

THICKNESS

HARDNESS

• KortFUTURA leveringstid 550 is an abrasion resistant RESILIENCE • Lagerføres ved behov steel with a nominal hardness of 550

8,0 - 65,0

540 - 575

30J / -40º

mm

HBW

CVL

HBW. Typical applications are compo• Lang levetid nents with abrasion resistance.

BULLDOZER

BULLDOZER BULLDOZER

BULLDOZER

BULLDOZER

SCRAPER SCRAPER SCRAPER SCRAPER

GRADER GRADER GRADER

SCRAPER

GRADER

GRADER

LOADER 20

20 20

LOADER

LOADER LOADER LOADER Steel solutions for tough conditions

13

DOSERSKJÆR BYG DOSERSKJÆR

Valsede plater

Støpte og maskinerte hjørneplater

14

Et stort utvalg av Standard og Heavy Duty doserskjær til Caterpillar og Komatsu.

Doserskjær er tilgjengelig i forskjellige tykkelser avhenging av dine behov.

Støpte plater

FORSTYKKER FOR GRAVERE OG HJULLASTERE

Sliteplater for hjullastere i 500, 550 og 600 HB.

Forstykke Bunnplater Mutter Bolt

Låsepinne

Adaptere Tenner Segmenter Sitteplate hjørne Sitteplate Senter

Mutter Bolt

Sitteplate hjørne

Mutter Bolt

Steel Steel solutions solutions for for tough tough conditions. conditions

1515

HALVPIL SEGME HALVPILSEGMENTER 109-9081

Slitasjefaktor

Penetrasjon

FC109-9081

Slitasjefaktor

Penetrasjon

Slag

Slag 47,00 Kg. 103,40 Lbs

109 - 9081

FC109 - 9081

Slitasjefaktor:

Slitasjefaktor:

Penetrasjon:

Penetrasjon:

Totalvekt

51,20 Kg. 112,64 Lbs

FORDELER: Totalvekt Beskytter forstykket i fronten og undersiden.

ALVPIL SEGMENTER HALVPIL SEGMENTER

FUTURA HALVPILSEGMENTER: 10% mer slitestål enn lignende Totalvekt: Totalvekt: 47,00 Kg / 103,40 Lbs 51,20 Kg / 112,64 Lbs produkter i markedet. Design med ribber for minimalisering av slitasjen.

FC109-9081 109-9081 FC109-9081 Fordeler: Fordeler: Tilgjengelig for rette og spisse

Beskytter forstykket i fronten og undersiden.

Slitasjefaktor Beskytter forstykket i fronten og undersiden.

Slitasjefaktor Slitasjefaktor forstykker, både for hjullastere

Futura halvpil Segmenter:

Futura halvpil Segmenter: Penetrasjon Penetrasjon Penetrasjon og gravere.

10% mer slitestål enn lignende produkter i markedet.

Slag:

81

Slag:

Slag

0 Kg. 0 Lbs

10% mer slitestål enn lignende produkter i markedet.

Design med ribber for minimalisering av slitasjen.

Design med ribber for minimalisering av slitasjen.

51,20 Kg. Tilgjengelig for rette og spisse forstykker både Tilgjengelig for for rette og spisse forstykker både for 112,64 Lbs hjullastere og gravere.

109 hjullastere og gravere.

109

Slag

Slag 51,20 Kg. 47,00 Kg. 112,64 Lbs 103,40 Lbs

Totalvekt Totalvekt

Totalvekt

Kg Lb

Part#

OEM

52 115

FC109-9080 109-9080

155 341

FC109-9030 109-9030

988 54 118 45 1,8" FC109-9081 109-9081 988F 54 118 FC109-9082 109-9082 988G

FC109-9080 FC109-9082 FC109-9081 109 Kg Lb

109 Part#

OEM

FC109-9080 109-9080 988 54 118 45 1,8" FC109-9081 109-9081 988F 54 118 FC109-9082 109-9082 988G 52 115

155 341

FC109-9030 109-9030

155 341 100 3,9" FC109-9031 109-9031 155 341

FC109-9032 109-9032

994

Kg Lb

Part#

OEM

52 115

FC109-9080 109-9080

155 341

FC109-9030 109-9030

988 54 118 45 1,8" FC109-9081 109-9081 988F 988G 54 118 FC109-9082 109-9082

155 341 100 3,9" FC109-9031 109-9031 155 341

994

FC109-9032 109-9032

10

navn, beskrivelser, bilder og delenumre brukes kun som referanser.

10 Andre produsenters navn, beskrivelser, bilder og delenumre brukes kun som referanser.

16

155 341 100 3,9" FC109-9031 109-9031 FC109-9080 FC109-9032 109-9032 155 341 FC109-9082 FC109-9081

Andre produsenters navn, beskrivelser, bilder og delenumre brukes kun som referanser.

994

Fordeler: Beskytter fors Futura halvpil 10% mer slite Design med ri Tilgjengelig f hjullastere og

HALVPILSEGMENTER FOR SPISSE FORSTYKKER

109-9030 109-9030 109-9031 109-9031 109-9032 109-9032 994 994 109-9033 109-9033 117-6805 117-6805 117-6806 117-6806 109-2675 109-2675 992 109-2676 992 109-2676 109-2677 109-2677 195-7190 195-7190 992 992 195-7191 195-7191 990 990 195-7192 195-7192 264-2090 HX 264-2090 HX 990H 264-2091 990H 264-2091 HX HX 264-2092 264-2092 HX HX 109-9080 109-9080 988F 109-9081 988F 109-9081 109-9082 109-9082 116-7460 116-7460 988B 988B 116-7461 116-7461 980G 980G 116-7462 116-7462 257-1782 257-1782 HX HX 988H 257-1783 988H 257-1783 HX HX 257-1784 257-1784 HX HX 113-3140 113-3140 980F 980F 113-3141 113-3141 980C 980C 113-3142 113-3142 135-9544 135-9544 966G 966G 135-9545 135-9545 972G 972G 135-9546 135-9546 *On *On specific specific base base edge edge

CTR FC109-9030 CTR FC109-9030 RH FC109-9031 RH FC109-9031 LH FC109-9032 FC109-9032 LH CTR CTR RH RH LH LH CTR CTR RH RH LH LH CTR CTR RH RH LH LH CTR CTR RH RH LH LH CTR FC109-9080 FC109-9080 CTR RH FC109-9081 FC109-9081 RH LH FC109-9082 FC109-9082 LH CTR CTR RH RH LH LH CTR CTR RH RH LH LH CTR CTR RH RH LH LH CTR CTR RH RH LH LH

Units Units 55 55 55 55 55 55 44 44 44 44 44 44 44 44 44 33 33 33 33 33 33 44 44 44 22 22 22 22 22 22

150 150 155 155 155 155 218 218 153 153 153 153 114 114 125 125 125 125 87 87 92 92 92 92 88 88 94 94 94 94 46 46 44 44 44 44 42 42 43 43 43 43 88 88 93 93 93 93 35 35 42 42 42 42 34 34 39 39 38 38

Lbs Lbs 331 331 341 341 341 341 481 481 336 336 336 336 251 251 275 275 275 275 191 191 202 202 202 202 194 194 206 206 206 206 102 102 97 97 97 97 92 92 94 94 94 94 194 194 206 206 206 206 77 77 92 92 92 92 75 75 86 86 84 84

OEM OEM OEM OEM 103-1833 103-1833 103-1834* 100 3,9" 3,9" 103-1834* 100 103-1835* 103-1835* 107-3383 107-3383 103-1834* 75 3" 3" 103-1834* 75 103-1835* 103-1835* 4T-6760 107-3530 4T-6760 107-3530 4T-6761 1,6" 107-3531 40 4T-6761 40 1,6" 107-3531 4T-6762 107-3532 4T-6762 107-3532 4T-6760 107-3530 4T-6760 107-3530 1,6" 107-3531 107-3531 4T-6761 40 1,6" 4T-6761 40 4T-6762 107-3532 4T-6762 107-3532 264-2090 264-2090 264-2091 264-2091 264-2092 264-2092 101-9435 107-3536 101-9435 107-3536 101-9436 1,6" 107-3537 101-9436 40 40 1,6" 107-3537 101-9437 107-3538 101-9437 107-3538 9W-5734 107-3490 9W-5734 107-3490 9W-5737 1,4" 107-3491 9W-5737 35 35 1,4" 107-3491 9W-5730 107-3492 9W-5730 107-3492 257-1782 257-1782 257-1783 257-1783 257-1784 257-1784 4T-3015 140-6862 4T-3015 140-6862 4T-7139 1,2" 140-6863 30 4T-7139 30 1,2" 140-6863 4T-7140 140-6864 4T-7140 140-6864 135-9294 135-9294 135-9295 1,6" 135-9295 40 40 1,6" 135-9296 135-9296

OEM OEM

50 50

2" 2"

50 50

2" 2"

107-6294 107-6294 107-6295 107-6295 107-6296 107-6296 107-6294 107-6294 107-6295 107-6295 107-6296 107-6296

PB-801 PB-801

NP-114 NP-114

60 2,4" 2,4" PB-801 PB-801 60

NP-114 NP-114

60 2,4" 2,4" PB-801 PB-801 60

NP-114 NP-114

PB-806 PB-806

NP-114 NP-114

138-0865(ARM) 138-0865(ARM) 1,8" 138-0866(ARM) 40 1,6" 45 1,6" PB-807 PB-807 45 1,8" 138-0866(ARM) 40 138-0867(ARM) 138-0867(ARM) 138-6470(ARM) 138-6470(ARM) 1,8" 1,4" PB-800 138-6471(ARM) 45 45 1,8" 138-6471(ARM) 35 35 1,4" PB-800 138-6472(ARM) 138-6472(ARM)

1,4" 35 35 1,4"

107-8582 107-8582 107-8583 107-8583 107-8584 107-8584

1,8" PB-798 45 45 1,8" PB-798

NP-114 NP-114 NP-114 NP-114

NP-114 NP-114

PB-798 PB-798 NP-114 NP-114

Futura Futura halvpil halvpil segmenter segmenter

HALVPILSEGMENTER FOR RETTE FORSTYKKER

Units Units

Lbs Lbs

OEM OEM 4T-6700 4T-6700 109-9019 109-9019 4T-6699 4T-6699

30 30 30 30

1,2" 1,2" 1,2" 1,2"

107-8580 107-8580 135-8219 135-8219

45 45 45 45

1,8" 1,8" 1,8" 1,8"

PB-801 PB-801 PB-801 PB-801

NP-114 NP-114 NP-114 NP-114

30 30 30 30

1,2" 1,2" 1,2" 1,2"

140-6668 140-6668 140-6870 140-6870

35 35 35 35

1,4" 1,4" 1,4" 1,4"

PB-801 PB-801 PB-801 PB-801

NP-114 NP-114 NP-114 NP-114

4T-6693 4T-6693

25 25 25 25

1" 1" 1" 1"

132-1036 132-1036

35 35

1,4" 1,4" 1,4" 1,4"

PB-940 PB-940 PB-942 PB-942

NP-100 NP-100 NP-100 NP-100

26 26

4T-6694 4T-6694

25 25

1" 1"

132-1035 132-1035

35 35

1,4" 1,4"

PB-942 PB-942

NP-100 NP-100

34 34

4T-6695 4T-6695

25 25

1" 1"

132-1037 132-1037

35 35

1,4" 1,4"

PB-942 PB-942

NP-100 NP-100

980C 980C 980F 980F 980F 980F 980G 980G 970 970 970F 970F 966D 966D 966E 966E 966F 966F 966G 966G 966G 970F 966G 970F

173-7447 173-7447 174-4115 174-4115

77 77

23 23 26 26

51 51 56 56

174-4114 174-4114 174-4116 174-4116

77 66

22 22 24 24

49 49 54 54

963 963 950 950 943 943 930 930 920 920 953 955 939 953 955 939

4T-6692HA 4T-6692HA 4T-6693HA 4T-6693HA

CTR CTR RH&LH RH&LH

55 22

12 12 12 12

25 25 25 25

4T-6694HA 4T-6694HA

CTR CTR

55

12 12

4T-6695HA 4T-6695HA

RH&LH RH&LH

22

15 15

963 963 963B, 963B, 953B 953B 953C 953C 951 951 950 950 941 941 938F 938F 938 938 G G 936 936 930 926 926 924f 924f 920 920 916 916 930 IT62 IT38 IT38 IT28 IT28 IT26 IT26 IT24F IT24F IT14 IT14 IT12 IT12 IT62

OEM OEM

100-6666 100-6666 4T-6692 4T-6692

6 6

Andre produsenters navn, beskrivelser, bilder og delenumre brukes kun som referanser.

Andre produsenters navn, beskrivelser, bilder og delenumre brukes kun som referanser.

Steel Steel solutions solutions for for tough tough conditions. conditions

17

SKUFFEBESKYTTELSE KOMPLETT SYSTEM

Sliteribber i 500HB. Stålet kombinerer seighet, slitestyrke og gode bearbeidingsegenskaper og gir dermed optimal beskyttelse mot slitasje.

SKUFFEBESKYTTELSE SKUFFEBESKYTTELSE KOMPLETT KOMPLETT KOMPLETTSYSTEM SYSTEM SYSTEM

Sliteribber Sliteribber Sliteribber i i500HB. i500HB. 500HB. RUNDE HARDMETALL PLATER RB CB Stålet Stålet Stålet kombinerer kombinerer kombinerer seighet, seighet, seighet, slitestyrke slitestyrke slitestyrke og og oggode gode godebearbeidingsebearbeidingsebearbeidingseHARDMETALLSTENGER 700HB 700HB 700HB genskaper genskaper genskaper og og og gir gir gir dermed dermed dermed optimal optimal optimal beskyttelse beskyttelse beskyttelse mot mot mot slitasje. slitasje. slitasje.

RBRB RB 700HB 700HB 700HB

B 12mm 12mm 12mm 0,5inch 0,5inch 0,5inch

A

/ CB 0.7“ CB HARDMETALL HARDMETALL HARDMETALL PLATER PLATER PLATER 19,5mm CB 9,5mm / 0.4“ 700HB 700HB 700HB 700HB 700HB 700HB

WB 700HB

BRIKKER BRIKKER BRIKKER 700HB 700HB 700HB

WB WB WB 700HB 700HB 700HB B

9,5mm 19mm 0,7" 9,5mm 19mm 0,7" 0,4" 9,5mm 0,4" 19mm 0,7" 0,4"

RUNDE RUNDE RUNDE 12mm / 0.5“ HARDMETALLSTENGER HARDMETALLSTENGER HARDMETALLSTENGER

BRIKKER 700HB

A B BB

B BB

B BB

Ø

A AA A AA A AA

B BB

ø øø

LbLbLb Part# Part# Part# Cross Kg.Kg.Kg. Cross Cross RefRefRef

REF! 353535 1,91,91,9 229 229 229 4 4 4F35 F35 F35 RBRBRB280-4096 REF! REF! REF! REF! REF! REF! 2828REF! 28REF! 280-4096 280-4096

280-4097 280-4097 REF! 555555 5,75,75,7 305 305 305 121212F55 F55 F55 RBRBRB280-4097 REF! REF! REF! REF! REF! REF! 4242REF! 42REF! 280-4098 280-4098 305 305 305 REF! REF! REF! 5959REF! 59REF! REF! 808080 REF! REF! REF! 10,8 10,8 10,8 242424F80 F80 F80 RBRBRB280-4098

SVEISBARE SVEISBARE SVEISBARE SIDEKUTTERE SIDEKUTTERE SIDEKUTTERE

450HB 450HB 450HB

mm mm mm inch inch inch A AA LbLbLb Part# Part# Part# B B B Kg.Kg.Kg.

Cross Cross Cross RefRefRef

WS WS WS

14,5 14,5 14,5 150 150 150 4 4 F150 4 F150 F150 WS WS WS161616 REF! REF! REF! 3232REF! 32REF! REF! 1,61,61,6 0,6" 0,6" 0,6" 3,43,43,4 7 7 F200 7 F200 F200 WS WS WS202020 200 200 200 REF! REF! REF! 4040REF! 40REF! REF! REF! REF! REF!

18

ø øø

240mm 240mm 240mm 9,4inch 9,4inch 9,4inch

5,05,05,0 111111 F280 F280 F280 WS WS WS282828 280 280 280 REF! REF! REF! 4040REF! 40REF! REF! REF! REF! REF!WP72S WP72S WP72S

B BB

Kg.Kg.Kg. LbLbLb Part# Part# Part#

252525 REF! REF! REF!1,01,01,0 2 2 2F25 F25 F25 CBCBCB

Cross Cross Cross RefRefRef

D38CB, D38CB, CB40N, CB40N, CB40N, 1086NA 1086NA 1086NA 404040 REF! REF! REF!1,61,61,6 4 4 4F40 F40 F40 CBCBCB D38CB, D51CB, D51CB, D51CB, CB50N CB50N CB50N D64CB, D64CB, CB65N, CB65N, CB65N, 1088NA 1088NA 1088NA 656565 6 6 6F65 F65 F65 CBCBCB D64CB, REF! REF! REF!2,82,82,8 D100CB, D100CB, CB100N CB100N CB100N REF! REF! REF!4,34,34,3 100 100 100 9 9 9F100 F100 F100 CBCBCB D100CB, D130CB, D130CB, CB130N, CB130N, CB130N, 090NA 090NA 090NA REF! REF! REF!5,75,75,7 150 150 150 131313 F130 F130 F130 CBCBCBD130CB, 505050 5 5 5F50 F50 F50 CBCBCB REF! REF! REF!2,12,12,1

MEKANISKE MEKANISKE MEKANISKE SIDEKUTTERE SIDEKUTTERE SIDEKUTTERE 500HB 500HB 500HB

mm mm mm inch inch inch B B B Kg.Kg.Kg. A AA LbLbLb Part# Part# Part#

A AA

B BB

ø øø

LbLbLbPart# Part# Part# Cross Cross Cross RefRefRef Kg.Kg.Kg.

D50BN D50BN D50BN

D25CB D25CB D25CB

9,59,5 REF! 9,5REF! REF! 2121REF! 21REF! 1 1 F60 1 F60 F60 WB WB WB WB60 REF! 606060 REF! REF! REF! 0,60,60,6 WB60 WB60

D75BN D75BN D75BN

9,59,5 REF! 9,5REF! REF! 2828REF! 28REF! 2 2 F75 2 F75 F75 WB WB WB WB75 REF! 757575 REF! REF! REF! 1,11,11,1 WB75 WB75

D90BN D90BN D90BN

REF! REF! REF! REF! 909090 REF! REF! 3434REF! 34REF! 9,59,5 9,5REF! 1,41,41,4 3 3 F90 3 F90 F90 WB WB WB WB90 WB90 WB90 D114BN D114BN REF! REF! REF! REF! 115 115 115 REF! 3535REF! 35REF! 1313REF! 13REF! 3,33,33,3 7 7F115 7 F115 F115 WB WB WBD114BN

D150BN D150BN D150BN

REF! 150 150 150 REF! 4545REF! 45REF! 1616REF! 16REF! 1616F150 16F150 F150 WB WB WBWB150 REF! REF! REF! 7,27,27,2 WB150 WB150

SCSC SC 500HB 500HB 500HB

Cross Cross Cross RefRefRef

TAW38X440 TAW38X440 TAW38X440 30301,2" 301,2" 1,2" REF! REF! REF! 106 106 106 REF! REF! REF! 28,3 28,3 28,3 TAW40X440 TAW40X440 TAW40X440 483 483 483 6262F3050 62F3050 F3050 SCSCSC 505050 2"2"2" TAW50X505 TAW50X505 TAW50X505 60602,4" 602,4" 2,4" TBW75X545 TBW75X545 TBW75X545 58,7 58,7 58,7 129 129 129 F6080 F6080 F6080 SCSCSC 603 603 603 REF! REF! REF! 373 373 373 REF! REF! REF! 80803,1" 803,1" 3,1" TBW75X655 TBW75X655 TBW75X655

A AA

B BB

Lm Lm 48 48 19 19 60 60 23, 23,

HEEL SHROUDS HEEL SHROUDS HS 450HB LOWER WING SHROUDS LOWER WING SHROUDS SKUFFEHJØRNER/VINKLER LWS LWS LOWER WING SHROUDS LOWER WING SHROUDS LWS LWS W HEEL HS W HEEL SHROUDS SHROUDS HS 450HB 450HB HSQR HSQR 500HB 500HB HS 450HB HS 450HB CUTTERS SIDESIDE CUTTERS SIDE CUTTERS SIDE CUTTERS FOKFOKFOK FOK HS 450HB HS 450HB HEEL SHROUDS HS 450HB HSQR 500HB Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes only.

: ONS: S RLESS

Other Other manufacturer's manufacturer's names, names, descriptions, descriptions, pictures pictures and and part part numbers numbers are are used used forfor reference reference purposes purposes only. only.

24 TB TB PDD33024#1 DD33024#1 D33024 PDD33024#1 FDD33024 TB PDD33024#1 66 TB PDD33366#1 DD33366#1 D33366 TB PDD33366#1 FDD33366 TB PDD33366#1 Kg Lb Part# Cross R L mm in Kg Lb Part# Cross R L mm in 796 31,3 50 2,0 59,1 130 FES4410 ES4410 ckBlock CrossCross Ref Ref oss RefBlock hrust Cross Ref 796 31,3 50 2,0 59,1 130 FES4410 ES4410 - HAMMERLESS FAP (PIN) 8D33808 TB TBPDD33808 LOWER WING LOWER WING 3808 LOWER WING DD33808 TBPDD33808 PDD33808 LOWER WING FAB (BASE) SHROUD 8D33808 TB PDD33808 SHROUD SHROUD 3808 TB TBPDD33808 SHROUD DD33808 PDD33808 8D33808 TB TBPDD33808 3808 DD33808 TBPDD33808 PDD33808 2D33312#1 TB TBPDD33312#1 3312 DD33312 TBPDD33312#1 PDD33312#1 2D33312#1 TB TBPDD33312#1 THRUST 3312 DD33312 TBPDD33312#1 PDD33312#1 BLOCKS 7D33367#1 TB TBPDD33367#1 FDD32816 TB 3367 DD33367 TBPDD33367#1 PDD33367#1 HS 450HB Kg Lb Part# L mm in

120KLKSR THRUST LOWER LOWER ES4410 796 31,3 PDB31183-3 50 2,0 59,1 130 FES4410 LOWER LOWER884 34,8 80 3,1 132 290 FPDE52445 PDE52445 THRUST BLOCKS WING WING WING WING BLOCKS FDE52445 TB SHROUD SHROUD SHROUD SHROUD FDE52445 TBHAMMERLESS FBP (PIN) Lmm in Lb Part# Cross Ref Lmm in Kg Lb Part# Cross Ref FBB Kg (BASE) Lmm in Kg Lb Part# Cross Ref Lmm in Kg Lb Part# Cross Ref 884 34,8 80 3,1 132 290 FPDE52445 PDE52445 811 31,9 90 3,5 70 154 FOKRH90 WS 2224824 884 34,8 80 3,1 132 290 FPDE52445 PDE52445 811 31,9 90 3,5 70 154 FOKRH90 WS 2224824

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purpos

Other manufacturer's names, descriptions, pictures and part numbers are used for reference purposes o

75KLKSR THRUST E7-4411-4A THRUST BLOCKS BLOCKS FDD32816 TB FDD32816 TB

Cross R

HEEL SHROUDS DRP CATERPILLAR MECHANICAL MECHANICAL HEEL SHROUDS HEEL SHROUDS

THRUST THRUST THRUST THRUST HEEL SHROUDS BLOCK BLOCK BLOCK BLOCK SHROUDS THRUST HEEL DRP CATERPILLAR WELD-ON BLOCKS DRP CATERPILLAR FDE52445 WELD-ON TB SHROUDS Kg. Lb mm A inHEEL Part# Cross Ref HS 450HB HS 450HB HEEL SHROUDS A 16 35 185 7,3" FC6529 HS 138-6529 Lmm in

Kg Lb

Part#

Cross Ref

Lmm in

Kg Lb

Kg. Lb mm

16 35 185 7

15 33 189 Part# Cros7

A WELD-ON HEEL SHROUDS HEEL SHROUDS 15 33 189 7,4" FC6551 HS 138-6551 35 76 268 1 796 31,3 50 2,0 59,1 130 FES4410 ES4410 884 34,8 80 3,1 132 290 FPDE52445 PDE52445 811 31,9 90 3,5 70 154 FOKRH90 WS 222 HEEL SHROUDS DRP CATERPILL DRP SANDVIK 35 76 268 10,6" FC1019 HS 157-1019 34 75 268 1 inPart# Kg. Lb Cross Part# CrossCross Ref Ref in LKg. Part# Cross WELD-ON Kg.L mm Lb mm Amm inLLbmm Ref in Kg. Part# in Lb Kg. Lb L mm Part#Ref Cross Ref 34 75 268 10,6" FC1027 HS 157-1027 WELD-ON Kg. Lb mm A in Part# Cross Ref PIN HEEL SHROUDS 5,9" 4 138-6529 150FC6529 1,6 HS F150 WS WS 14,514,5 0,6"0,6" 5,9"7,3" 4150 1,6 F150 WS 14,5 0,6" 16150 35 185 5,9" 4 F150 1,6 5,9" 4 F150 150 1,6 WS 14,5 0,6" PIN WING SHROUD HEEL SHROUDS WING SHROUD WING SHROUD 16200 35 185 7,3" HS 138-6529 WING SHROUD 7,9" 7 200FC6529 3,4 F200 WS 20 0,8" MECHANICAL HEEL 7,9" 7 3,4 F200 WS 20 0,8" A 7,9"HS 7 F200 200 200 3,4 138-6551 WS WS 20 20 0,8" 0,8" 15 33 189 7,4" FC6551 7,9" 7 F200 3,4 COMPATIBLE COMPATIBLE A COMPATIBLE COMPATIBLE 15280 33 189 138-6551 280FC6551 11,0" 5,0 HS 11 F280 WS WS 28 28 1,1"1,1" WP72S SHROUDS HEEL SHROUD 11,0"7,4" 5,0 11 WS 28 F280 1,1" WP72S 280F280 11,0" 5,0 157-1019 11 WP72S 280 11,0" 5,0 11 F280 WS 28 1,1" WP72S O&K O&K 35 76 268 10,6" FC1019 HS O&KO&K DRP 35 76 268 10,6" FC1019 HS 157-1019 HEEL SHROUDS Kg. Lb A 34 75 268 10,6" FC1027 HS 157-1027 SANDVIK 34 75 268 10,6" FC1027 HS 157-1027 DRP CATERPILLAR Kg Lb A Part# Cross Ref 13 28 Kg Lb A Part#HEEL Cross Ref F10 HS ES6697-4 ES6697-4HX 10 21 206 16 34 8,11" HEEL SHROUDS F10 HS ES6697-4 ES6697-4HX 12 26 190 F12 HS ES6697-3 ES6697-3HX 10 21 SHROUDS 27 58 7,4" DRPES6697-3 ES6697-3HX 12 26 190 F12 HS ES6697-2, ES6697-2HX DRP Kg Lb 256 A Kg. Lb 23A 51 Part#F24 HS Cross Ref CWS50X190-1 Base Pin 7,4" SANDVIK 42 Kg 91 Lb 10,08" A ES6697-2, ES6697-2HX Kg. Lb A Part# Cross Ref Base Pin SANDVIK 23 51 F24 HS 13 28 FWR314C ES6697-4 Kg. 14 mm 6 Lb CWS50X190-1

ES6697-5, ES6697-5HX F40 HS Cross Ref 13 28 41 ES6697-4 CWS60X250-1 FWR314C 6 14 206 FWB31C 20689 206 Kg. Lb mm AES6697-3 in Part# CrossFWL01C Ref 250 8,11" Kg. Lb mm A in Part# Cross Ref ES6697-5, ES6697-5HX CrossWELD-ON Ref 16 34 FWR313C 88 FWB31C FWL01C 20 198 9 194 18 40 206 KLL01MC 41 89 F40 HS 8,11" 8,11" ES6697-4 ES6697-4HX 16 34 8,11" FWR313C ES6697-3 ES6697-7 KLL01MC 9 20 278 9,8" CWS60X250-1 250 HEEL SHROUDS 27 58 88 193 FWR312C ES6697-2 F907,8" HS 18 40 198 FS307 HS 69041891 218 ES6697-4 ES6697-4HX 169,8" 35 185 7,3" FC6529 HS 138-6529 30 202 19 67 42 10,94" ES6697-3 ES6697-3HX FWR312C ES6697-2 CWS100X250-1 ES6697-727 58 218 F907,4" HS FC6551 19257 42 8,58" A 88 193 FWL01B 117 ES6697-3 ES6697-3HX 256 30 67 202 8,0" FS517 HS 69040888 CWS100X250-1 8,58" 15 33 189 HS 138-6551 42 91 10,08" FWR315B ES6697-5 FWB31B KLL01MB ES6697-2, ES6697-2HX FWL01B 15 32 256 256 42 91 FWR315B ES6697-5 FWB31B KLL01MB 15 32 ES6697-2, ES6697-2HX CWS50X190-1 35 76 268 10,6" FC1019 HS 157-1019 10,08" 256 CWS50X190-1 24 52 10,08" Kg. Lb mm A in Part# Cross Ref ES6697-5, ES6697-5HX 88 FWR317A 194 ES6697-7 FWB31A 24 52 10,08" 41 89 F40 HS ES6697-5, 34 75 268 10,6" FC1027 HS 157-1027 Kg. Lb mm A in Part# Cross Ref ES6697-5HX 88Cross FWR317A ES6697-7 FWB31A FWL01A 37 81 194 278 CWS60X250-1 L Lb mmFS307 Kg. Lb Ref Ref Part#Part# 41 89 250 F40 HS mm198 Kg.7,8" Part# L mm Kg. Lb Cross 18 L40 HS Kg. 69041891 FWL01A 37 81 307 L mm Lb Cross Ref Part#Ref CWS60X250-1 278Cross KLL01MA 10,94" 250 9,8" ES6697-7 18 40 198 7,8" FS307 HS 69041891 307 TAW38X440 10,94" 117 FWR318A PDE56250 FWB318A KLL01MA 55121 12,09" 257 TAW38X440 88 193 9,8" F90 HS 483 HEEL 483 TAW38X440 30 1,2" ES6697-7 TAW38X440 30 67 202 8,0" FS517 HS 69040888 30 1,2" CWS100X250-1 483 FWR318A PDE56250 FWB318A 30117 1,2" 28 483 62 SC TAW40X440 88 193 F90 HS 30257 1,2" 62 FS517 F3050 SCF3050 TAW40X440 55121 12,09" 30 19" 67 202288,0" HS 69040888 28 62 F3050 SC TAW40X440 50 2" CWS100X250-1 28 62 F3050 SC TAW40X440 SHROUDS 50 2" 50 TAW50X505 2" 50 TAW50X505 2" TAW50X505 CrossLmm Ref Ref inKg inLb Kg Part# Lb Lb Part# Cross Ref Ref 19" 19" 19" TAW50X505 Cross RefPart# in Lmm Ref b Part# Cross Kg Part# Kg Lb Part# Cross Ref Lmm Lmm in Kg LbCross Part# CrossCross Ref DRP 60 2,4" TBW75X545 603 603 60 2,4" TBW75X545 603 60 2,4" TBW75X545 59 603 129 F6080 SC 80 60 2,4" TBW75X545 Kg. Lb A Part# Cross Ref Base Pin 59 23,7" 129 F6080 PDE52445 8113,531,9 70 FOKRH90 WS WS PDE52445 90 154 154 2224824 532 811 PDE52445 FOKRH90 WS154 PDE52445 31,9 90 1543,5 2224824 59SC129 F6080 SC3,1" TBW75X655 SANDVIK 59 129 F6080 SC3,1" 23,7" FPDE52445 8117031,9 FOKRH90 90 PDE52445 90 3,5 2224824 80 3,1" TBW75X655 FPDE52445 811 FOKRH90 WS 290 31,9 90 70 3,5 70 2224824 23,7"23,7" 80 TBW75X655 80 3,1" TBW75X655 13 28 FWR314C ES6697-4 Kg Lb A Part# Cross Ref HSQR 500HB WR 500HB 206 FWR313C ES6697-3 FWB31C FWL01C 16 34 8,11" KLL01MC F10 HS ES6697-4 ES6697-4HX 10 21 27 58 FWR312C ES6697-2 MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL ES6697-3HX 12 26 190 F12 HS ES6697-3 MECHANICAL MECHANICAL MECHANICAL WEAR RUNNERS 256 FWR315B ES6697-5 FWB31B FWL01B HEEL SHROUDS WEAR RUNNERS HEEL SHROUDS 7,4" HEEL SHROUDS WEAR RUNNERS 42 91 10,08" WEAR RUNNERS HEEL SHROUDS ES6697-2HX HEEL SHROUDS WEAR RUNNERS KLL01MB 23 51 F24 HS ES6697-2, CWS50X190-1 EEL SHROUDS OUDS HEEL SHROUDS HEEL SHROUDS Kg. Lb mm A in Part# Cross Ref ES6697-5, ES6697-5HX 88 194 FWR317A ES6697-7 FWB31A RP CATERPILLAR RPILLAR FWL01A DRP CATERPILLAR CWS60X250-1 DRP CATERPILLAR 41 89 250 F40 HS 278 18 40 198 7,8" FS307 HS 69041891 KLL01MA 10,94" 9,8" ES6697-7 117 257 FWR318A PDE56250 FWB318A 88 193 F90 HS 30 67 202 8,0" FS517 HS 69040888 CWS100X250-1 Kg Kg 10 10 12 12 23 23

Lb Lb 21 21 26 26 51 51

A A

HS 450HB

Part# Part# F10 HS F10 HS 190 F12 HS 190 7,4" F12 HS 7,4" F24 HS F24 HS

SHS450HB 500HB 0HB HSQRHSQR 500HB HSQR 500HB HS450HB 450HB HSQR 500HB

ross Ref Ref rt# CrossCross Ref 38-6529 S HS 138-6529 29 138-6529 38-6551 S HS 138-6551 51 138-6551 57-1019 S HS 157-1019 19 157-1019 57-1027 S 157-1027 27 HS 157-1027

WRWR500HB WR 500HB WR500HB 500HB

PIN

PIN PIN PIN WELD-ON WELD-ON WELD-ON WELD-ON BASE BASE BASE BASE

L HEEL HEEL OUDS SHROUDS SHROUDS DRPDRP A ACross Part#Ref Cross Ref RefBase Pin A A Cross Part#Ref Cross Ref RefBase PinLbPin A Kg Lb Kg Part# Base Kg. Lb AKg. LbPart# Base PinBaseBase Lb Cross DVIK Lb Cross Kg Lb A Part# Part# CrossPin RefBaseBase Pin Pin Lb A Part# Part# Cross Ref Pin Kg SANDVIK SANDVIK Kg. Kg.

KLR01MC 13 FWR314C ES6697-4 28 FWR314C 146 206 FWR01C KLR01MC 6 14 206 6 FWR01C 13 28 ES6697-4 FWR314C 146 206 FWR01C KLR01MC KLR01MC 13 28ES6697-4 ES6697-4 FWR314C 14 FWL01C 206 FWR01C FWB31C FWB31C 206 206 FWL01C FWL01C 20616 FWR313C FWB01C FWB01C FWL01C FWB31C 8,11" FWL01C FWB31C FWL01C 8,11" 34 FWR313C ES6697-3 FWB01C FWL01C 206 FWB01C FWL01C 16 34 8,11" ES6697-3 KLR02MC 209 20 8,11" FWR02C 9 FWR02C KLR02MC 8,11" 20 9KLL01MC 16 8,11" ES6697-3 34 FWR313C 16 8,11" 34 8,11" FWR313C ES6697-3 KLL01MC KLL01MC KLR02MC FWR02C KLR02MC KLB01MC KLL01MC FWR02C KLB01MC KLL01MC KLL01MC 9 20 KLB01MC KLL01MC KLB01MC KLL01MC 27 FWR312C 58 FWR312C ES6697-2 218 27 58 ES6697-2 218 27 58 ES6697-2 KLR19MC 218 4219 8,58" FWR19C 27 58 FWR312C FWR312C ES6697-2 KLR19MC 218 19 42 8,58"19FWR19C KLR19MC 4219 8,58" FWR19C KLR19MC 42 FWR19C 8,58" 256 256 FWL01B FWL01B 25642 FWR315B FWL01B FWL01B 91 FWR315B ES6697-5 FWB31B 256 42 91 10,08" ES6697-5 FWB31B KLR01MB 3215 256 FWR01B KLR01MB 15KLL01MB 32 25615FWR01B KLL01MB FWB01B FWL01B 42 10,08" 91 FWR315B ES6697-5 FWB31B 42 10,08" 91 10,08" FWR315B ES6697-5 FWB31B KLL01MB FWB01B FWL01B KLR01MB 32 FWR01B 32 256 FWR01B KLR01MB FWB01B FWL01B KLL01MB 15 256 FWB01B FWL01B 10,08" KLL01MB 10,08" KLB01MB KLB01MB KLL01MB KLR02MB 52 FWR02B 24 10,08" KLR02MB KLB01MB KLL01MB 10,08" 52 FWR02B 24 KLB01MB KLL01MB rossCross Ref KLR02MB 52 FWR02B 24 KLR02MB 52 FWR02B 24 88 FWR317A 194 ES6697-7 FWB31A 88 FWR317A 194 ES6697-7 FWB31A Ref Ref 88 194 rt# Cross ES6697-7 FWB31A 88 194 FWR317A FWR317A ES6697-7 FWB31A FWL01A 278 FWL01A 278 KLR01MA FWR01A 37 8137 307 KLR01MA 278 278 81 FWL01A 37FWL01A FWB01A FWL01A 9041891 FWB01A FWL01A KLR01MA 8137 307 FWR01A KLR01MA KLL01MA 81 307 FWR01A 10,94" FWB01A FWL01A KLL01MA 10,94" FWB01A FWL01A S7 HS 69041891 69041891 307 FWR01A KLB01MA KLL01MA 10,94" KLL01MA 10,94" 12,09" KLL01MA 117 FWR318A 257 PDE56250 FWB318A 12,09" KLB01MA KLL01MA 117 257 FWR318A PDE56250 FWB318A KLR02MA 55121 FWR02A 12,09" KLR02MA KLB01MA KLL01MA 12,09" 117 FWR318A 257 PDE56250 FWB318A 55121 FWR02A 9040888 KLB01MA KLL01MA 117 FWR318A 257 PDE56250 FWB318A KLR02MA 55121 KLR02MA 55121 FWR02A FWR02A S7 HS 69040888 69040888 13 28

19

1919 19

Steel solutions for tough conditions

19

#

FUTURA CLACK SYSTEM 100% kompatibel FUTURA CLACK med cat rippere SYSTEM NY SLAGFRI 100% kompatibel RIPPERBESKYTTER. med cat rippere FORBEDRET RIPPER FUTURA CLACK SYSTEM

100% KOMPATIBEL MED CAT RIPPERE SLAGFRI LÅSEPINNE

1.

HP

2.

Ny slagfri ripperbeskytter.

Forbedret design som SLAGFRI maksimal beskyttelse.

3.

SLAGFRI LÅSEPINNE

1

2

3

Clack!

L mm L inch

Clack!

Size

0HP R300

0HP R350

0HP R450

0HP R500

0HP R550

6

ø

inch Kg

Lb

Size

20,5

0,8

0,3 0,6 FCR300HP R300

120 4,7

20,5

0,8

0,4 0,8 FCR350HP R350

135 5,3

26,0

1,0

0,7 1,5 FCR450HP R450

153 6,0

33,0

1,3

1,2 2,7 FCR500HP R500

170 6,7

37,5

1,5

1,7 3,8 FCR550HP R550

Kg

Lb

Part#

OEM

50,5 111

75 3,0" FC75 RPT

6J-8814 / 132-4716

105,8 233

90 3,5" FC90 RPT

9W-8365 / 132-1014

108,6 239 100 3,9" FC100 RPT

6Y-8960 / 132-1015

RPT

146,5 322 110 4,3" FC110 RPT 9N-4621 / 132-1016

Kg Lb Part# Andre produsenters navn, beskrivelser, OEM bilder og delenumre brukes kun som referanser.

50,5 111

75 3,0" FC75 RPT

6J-8814 / 132-4716

105,8 233

90 3,5" FC90 RPT

9W-8365 / 132-1014

108,6 239 100 3,9" FC100 RPT

6Y-8960 / 132-1015

146,5 322 110 4,3" FC110 RPT 9N-4621 / 132-1016

r, bilder og delenumre brukes kun som referanser.

20

Part#

3,6

92

NY RIPPERBESKYTTER. FORBEDRET DESIGN SOM GIR MAKSIMAL BESKYTTELSE

DESIGN SOM GIR MAKSIMAL BESKYTTELSE

SLAGFRI

GRUVEDRIFT GRUVEDRIFT FORMASKINER MASKINEROPP OPPTIL TIL800 800TONN TONN GRUVEDRIFT FOR GRUVEDRIFT FOR MASKINER OPP TIL 800 TONN

FOR MASKINER OPP TIL 800 TONN QUICK SELECTION GUIDE QUICK SELECTION GUIDE

NYHET! ADAPTERBESKYTTELSE

QUICK SELECTION NOSE SIZE TOOTH 950 TOOTH 920 1100 NOSE SIZE TOOTH 950 1100 TOOTH 920 MACHINE WEIGHT UP TO 350T 350-500T MACHINE WEIGHT UP TO 350T HITACHI EX3500, EX3500-3 350-500T EX3600, EX2600 HITACHI EX3500, EX3500-3 EX3600, EX2600 QUICK SELECTION GUIDE TEREX RH120E RH170 NOSE SIZE TOOTH 9503560B TOOTH5230B 920 1100 TEREX RH120E RH170 CATERPILLAR 6030, 5230ME, 6040, 6050B,

NYHET ADAPTERBESKYTTELSE NYHET ADAPTERBESKYTTELSE

GUIDE 1300 TOOTH 1120

1450 TOOTH 1220 1450 TOOTH 1220

1300 TOOTH 1120

500-750T 500-750T EX5500, EX5600

750-1000T 750-1000T EX8000 EX8000 RH400 1450 TOOTH 1220 RH400 6090FS

GRUVEDRIFT

Kg Lb Part# Cross Ref PIN Size Kg Lb Part# Cross Ref PIN Size 22 48 FM950 WC WC99 950 22 48 FM950 WC WC99 950 26 58 FM1100 WC WC95 WC1100 PN 1100 26 58 FM1100 WC WC95 WC1100 PN 1100 Kg Lb Part# Cross Ref PIN Size ©

NYHET ADAPTERBESKYTTELSE

CATERPILLAR 5230ME, 3560B 6040, 6050B, 5230B MACHINE WEIGHT 6030, UP TO 350T 350-500T KOMATSU PC3000, PC3000-6 PC4000 KOMATSU PC3000, PC3000-6 PC4000 HITACHI EX3500, EX3500-3 EX3600, KOMAT. (DEMAG) H285 H285S EX2600

Passer Eco® adaptere Passer tiltilEsco ®WC 22 (med WC99 Låsepinne) 950 48 tilFM950 Passer Esco Futura slagfri adaptere (med Futura adaptere (med Futura 26 slagfri WC WC95 WC1100 PN 1100 58 FM1100 Låsepinne) slagfri Låsepinne)

EX5500, EX5600 RH340, RH360 TOOTH 1120 1300 RH340, RH360 6060FS

6060FS 6090FS 500-750T 750-1000T PC4000, PC5500, PC5500-6 PC8000 PC4000, PC5500, PC5500-6 PC8000 EX5500, EX5600 EX8000 H48JS H485S H48JSRH400 H485S RH340, R995 RH360 R9800, R996 R9956060FS R9800, R996 6090FS

FOR MASKINER OPP TIL 800 TONN

Passer til Esco® adaptere (med Futura slagfri Låsepinne)

KOMAT. (DEMAG) TEREX LIEBHERR LIEBHERR CATERPILLAR

H285 H285S R9250, R9400, R9350, RH120E RH170 R994, R9250 R994B R9250, R9400, R9350, R994, R9250 6030, 5230ME, 3560B 6040, 6050B, 5230B R994B

KOMATSU

PC3000, PC3000-6

KOMAT. (DEMAG)

H285

NYHET ADAPTERBESKYTTELSE LIEBHERR Kg Lb

Part#

Cross Ref

22 48 FM950 WC

WC99

26 58 FM1100 WC

WC95

PIN

Size

WC1100 PN

1100

PC4000

PC4000, PC5500, PC5500-6

QUICK SELECTION GUIDE H285S H485S NOSE SIZE 950R9350, 1100 TOOTH 920 R9250, TOOTH R9400, R994, R9250 R995 R994B MACHINE WEIGHT UP TO 350T 350-500T

950

Passer til Esco adaptere (med Futura slagfri Låsepinne) ®

PC8000 H48JS

1300 TOOTH 1120

1450

TOOTH 1220

R9800, R996

500-750T

750-1000T

HITACHI

EX3500, EX3500-3

EX3600, EX2600

EX5500, EX5600

TEREX

RH120E

RH170

RH340, RH360

CATERPILLAR

6030, 5230ME, 3560B 6040, 6050B, 5230B

6060FS

6090FS

KOMATSU

PC3000, PC3000-6

PC4000

PC4000, PC5500, PC5500-6

PC8000

KOMAT. (DEMAG)

H285

LIEBHERR

R994, R9250

H285S R9250, R9400, R9350, R994B

EX8000 RH400

H485S Futura Mining H48JS R995 R9800, R996 Assembly sizes 1100, 1300 and 1450

Slagfri

STANDARD LÅSEPINNE

FUTURA låsepinne MINING FUTURA MINING ASSEMBLY SIZES Passer også ASSEMBLY SIZES 1100, 1300 AND 1450 HLK © til Posilok Plus 1100, 1300 AND 1450 FUTURA SLAGFRIMINING SLAGFRI FUTURA MINING ASSEMBLY SIZES LÅSEPINNE ASSEMBLY SIZES LÅSEPINNE 1100, 1300 1450 1100, 1300AND AND ®1450

HPN

STANDARD STANDARD LÅSEPINNE LÅSEPINNE DRP Posilok®

® HPN DRPFits Posilok Posilok® HPN Fits Posilok®

STANDARD LÅSEPINNE DRP Posilok Fits Posilok®

®

HPN

STANDARD LÅSEPINNE HPN

® 2 MONTERINGS DRP Posilok

HLK

Fits Posilok ® FitsPlus Posilok SLAGFRI SLAGFRI Plus LÅSEPINNE

LÅSEPINNE

MULIGHETER

HLK

Fits © Posilok DRP Posilok STANDARD ELLER SLAGFRI © Fits Posilok ®

HLK

HLK

Fits Posilok® Plus

Fits Posilok® Plus

Optimal Kompatibilitet En tann, to systemer: Standard og 2 MONTERINGS MULIGHETER © Passer til Posilok Standard MULIGHETER 2Salgfri.

MONTERINGS MULIGHETER 2 MONTERINGS STANDARD ELLER SLAGFRI STANDARD STANDARD ELLER SLAGFRI ELLER SLAGFRI og Posilok Plus mellomadapter.

L mm in ø in Kg Lb Part# L mm in ø in L mm in ø in Kg Lb Optimal Part# L mmKg ø in Kg Part# Lb Part# in Lb Kompatibilitet Optimal Kompatibilitet L mm in ø in Kg Lb Part# L mm in ø in Kg147LbREF! 38 REF! Part# 147 REF! 38 REF! 1,2 Optimal DRP PN92K 920 1100 1,5 3,4 FM920 92TK 2,6 FM920 PN Kompatibilitet En tann, toog systemer: Standard og Salgfri 147 REF! 38 REF! 1,2 2,6 FM920 PN DRP PN92K 920 1100 147 REF! 38 REF! 1,5 3,4 FM920 HLK HLK92TK PNPN 920 9201100 1100 En tann, to systemer: Standard Salgfri 158 REF! 44 REF! 1,6 3,5 FM1120 PN DRP PN112KC 1120 1300 REF!FM920 44 REF! 1,8HLK HLKPN112TKPN-B 1300 4,0 FM1120 147 REF! 38 REF! 1,2 2,6 FM920 PN DRP PN92K 920 1100 147 REF! 38 REF! 1,51583,4 92TK 920 1120 1100 Passerog til Salgfri Posilok Standard og Posilok En2tann, to systemer:® Standard MONTERINGS MULIGHETER 158 REF! 44 REF! 1,6 3,5 FM1120 PN DRP PN112KC 1120 1300 158 REF! 44 1,8 FM1120 HLK 112TKPN-B 1120 1300 4,0 REF! 189 REF! 50 REF! 2,3 5,0 FM1220 PN DRP 1220 1450 FM1220 HLK 122TKPN 1220 1450 Passer tilPN122KC Posilok Standard og Posilok® Steel158solutions Plus mellomadapter 158 REF! 44 REF! 1,6 3,5 FM1120 PN DRP PN112KC 1120 1300 REF! 44 REF! 1,8 4,0 FM1120 HLK 112TKPN-B 1120 1300 for tough conditions ®ELLER SLAGFRI ® STANDARD Passer til Posilok Standard og Posilok 189 REF! 50 REF! 2,3 5,0 FM1220 PN DRP PN122KC 1220 1450 FM1220 HLK 122TKPN 1220 1450 Plus mellomadapter 189 REF! 50 REF! 2,3 5,0 FM1220 PN DRP PN122KC 1220 1450 FM1220 HLK 122TKPN 1220 1450 Plus mellomadapter L mm in ø in Kg Lb Part# L mm in ø in Kg Lb Part# Optimal Kompatibilitet 14 Posilok og Posilok Plus er registrerte varemerker for Esco Corporation. Produsenters navn, delenumre, bilder og beskrivelse brukes kun som referanse ®

®

®

®

21

SEGMENTER / MELKETENNER LS

SEGMENTER / MELKETENNER

Lip Shroud SEGMENTER BODY

/ MELKETENNER

VENSTRE

LS

Lip Shroud BODY

SEGMENTER / MELKETENNER

VENSTRE

30º

LS

Lip Shroud BODY

VENSTRE

BODY

HØYRE

LS

BODY

LIP SHROUD BODY

LSRH LSRH

TAC90X245-2LA

TAC90X245-1A

14 F100X290 LS 14 F100X320 LS

TBC100X290-3

88 194 100 3,9" F100X320 LSLH

EXSTRA TBC100X290-4L BASE TBC100x320-2LA

14 F90X245 LS 14 F90X320 LS

126 277 100 3,9" F100X410 LSLH

14 F100X410 LS TBC100X410-4L Part# Lip Shroud

TBC100X410-3

LH 90 3,5" F90X245 LSLH

79 174 90 3,5" F90X320 LSLH

TAC90X320-6L

85 187 100 3,9" F100X290 LSLH

Part#

30º F90X245 LSRH F90X320 LSRH

TAC90X320-5

F100X290 LSRH ASSEMBLY

TBC100X320-1B F100X320 LSRH

14 LS/RH/LH TBC100X430-2L F100X430 LS TBC100X430-1 EXSTRA TB140 F140X475 BODY PIN VENSTRE SENTER HØYRE LS BASE 14 F120X330 TBC120x330-2LA 120 264 120 4,72" F120X330 LSLH TBC120x330-1A BASE TB160140 F140X420 LS/RH/LH 133 293 100 3,9" F100X430 LSLH

ASSEMBLY

Part#

F160X450 LS/RH/LH 14 F120X410 LS TBC120X410-3L TB230 F230X430 Part# Lip ShroudLS 127 279 120 4,72" F120X440 LSLH TBC120X440-2LB 11,5 F120X440 LS TB140 F140X475 LS/RH/LH 174 383 140 5,5" F140X420 LSLH TBC140X420-2LA 11,5 F140X420 LS F140X420 LS/RH/LH TB160140 TBC140X575LAF160X450 11,5 LS/RH/LH 230 506 140 5,5" F140X575 LSLH F140X575 VENSTRE SENTER HØYRE LS TB230 F230X430 14 LSF160X450 LS 236 519 160 6,3" F160X450 LSLH TBC160X450-2L 154 339 120 4,72" F120X410 LSLH

30°

160 6,3" F160X570 LSLH

TB140

F140X475 LS/RH/LH LS/RH/LH TB160140 F140X420 F160X450 LS/RH/LH TB230 F230X430 LS

F100X430 LSRH

30º

LSLH

BASE PIN

LH

PIN

LS

230 506 140 5,5" F140X575 LSLH F120X330 LSRH TBC120x330-2RA 9,0" 360 FBB Kg 792 Lb 230 LH F120X410 LSRH TBC120X410-3R 160 6,3" 236 519 FBP F160X450 LSLH 45 98 90 3,5" F160X570 F90X245 LSLH TBC120X440-1B F120X440 LSRH TBC120X440-2RB LSLH 160 6,3" 79 174 90 3,5" F90X320 LSLH TBC140X420-1A F140X420 LSRH TBC140X420-2RA

TBC1 Cross TBC1

360 85 792 187 230 100 9,0" 3,9" F100X290 LSLH TBC140X575RA

TBC1

14 F160X570 LS

Kg

F160X570 LSRH Lb Part# Cross

Cross Ref

βº

TAC90X245-2LA

14

EXSTRA LÆSEPINNE EXTRA BASE F90X245BASE LS TAC90X245-1A Part#BASECross Ref

7,6 β 16,7 FCP TC`P Kg Lb Part# Cross

LSRH

PIN

RH

90 3,5" F90X245 LSLH

BOL-ON VERTIKAL SEGMENT. 2 LÅSEMULIGHETER: STANDARD ELLER SLAGFRI

F90X245 LSRH

FOR SVEISING

FUTURA GRUVEDRIFT VERTIKALSEGMENTER

LS/RH/LH NING LIP SHROUDS: LS/RH/LH LS/RH/LH PINS

NING LIP SHROUDS: PINS

TIKAL SEGMENT. 2 LÅSEMUTANDARD ELLER SLAGFRI FES

TIKAL SEGMENT. 2 LÅSEMUTANDARD ELLER SLAGFRI 22 FES

TAC9

TBC160X450-2R 88 194 100 3,9" F100X320 LSLH

TBC1

126 277 100 3,9" F100X410 LSLH

TBC1

133 293 100 3,9" F100X430 LSLH FCB FCP F120X330 LSLH 120 264 120 4,72"

TBC1

154 verktøy 339 120 4,72" for F120X410 LSLH

TBC1

EXTFLS

Demonterings-

EXTFLS 279 120 4,72" F120X440 LSLH 127 Sidekuttere

TBC1

TBC1

1,8 FAB TAP 0,8 SEGMENTER/MELKETENNER FE Cross 174 383 140 5,5" F140X420 LSLH TBC1 Ref Part# Base+Pin Kg Lb Cross

BOL-ON VERTIKAL SEGMENT. 2 LÅSEMULIGHETER: STANDARD ELLER SLAGFRI FUTURA MINING LIP SHROUDS: BASES AND PINS SEGMENT. 2 LÅSEMUBOL-ON VERTIKAL LIGHETER: STANDARD ELLER SLAGFRI

LS

TAC9

2,2 4,8 FBP TBP Demonterings230 506 140 5,5" F140X575 LSLH TBC1 TAC90X245-2RA 0,8 FAB 7,6 1,8 16,7 FAB FCP TAB TC`P verktøy for 236 519 160 6,3" F160X450 LSLH TBC1 FAP 1,9 4,1 FBB TBB 14 F90X320SEGMEN79 174 LSLH TAC90X320-6L LS TAC90X320-5 F90X320 LSRH TAC90X320-6R Kg 90 Lb 3,5" Part#F90X320 Cross PIN EXTFLS Pin Sidekuttere Part# Lip Shroud LSRH LSLH LS TER Kg. Lb Part# Cross Ref BASE BASE PIN 3,9 8,5 FCB TCB 160 6,3" F160X570 LSLH Base 14 F100X290 LS TBC100X290-3 F100X290 LSRH TBC100X290-4R 1,83,9" 0,8 100 FABF100X290 TAP 85 187 LSLH TBC100X290-4L TB140 F140X475 LS/RH/LH 76 Cross FEB90 B90 34,6 Kg Lb Part# BASE LÆSEPINNE 4,83,9" 2,2 100 FBPF100X320 TBP LH LSLHDemonteringsKg Lb Cross Ref Part# LS Cross Ref RH LSRH Cross Ref Base+Pin β 14º F100X320 80 3,1" TBC100x320-2LA 88 194 TBC100X320-1B F100X320 TBC100x320-2RA LS/RH/LH 80 FEB90 B90L TB160140 F140X420 1,8 FAB 0,8 36,4 TAB L 100 7,6 16,7 FCP TC`P Body 792 230 9,0" 3603,9" F160X450 LS/RH/LH verktøy for 14 F90X245 45 277 98 100 90 3,5" TAC90X245-2LA LS 3,9" F90X245 F100X410LSLH LSLH TBC100X410-4L 126 F100X410 LS TAC90X245-1A TBC100X410-3 F90X245 F100X410LSRH LSRH TAC90X245-2RA TBC100X410-4R SEGMENFAB R B90R 4,1 79 1,9 36,0 FBB FEB90 TBB TB230 F230X430 LS Sidekuttere FAP 14 F90X320 90 3,5" 79 174 TAC90X320-6L LS TAC90X320-5 TER 3,9" F90X320 293 100 F100X430LSLH LSLH TBC100X430-2L 133 F100X430 LSBASE TBC100X430-1 F90X320 F100X430LSRH LSRH TAC90X320-6R TBC100X430-2R CESA 24 3,9 42,0 8,5 92 FCB F120 TCB LS 30º 26-2A Kg 100 Lb 3,9" Part# F100X290 Cross BASE 85 187 LSLH TBC100X290-4L TBC120x330-2LA 14 F100X290 120 264 120 4,72" F120X330 F120X330 LS TBC100X290-3 TBC120x330-1A F100X290 F120X330 LSRH TBC100X290-4R TBC120x330-2RA CESA 24 ASSEMBLY 1,8 0,8 FAB TAB 120 4,7" FBB 41,9 92 F120 LSRH 14 26-2A/RA 88 194 F100X320 TBC120X410-3L 120 3,9" 4,72" F100X320 154 339 100 F120X410 LSLH TBC100x320-2LA F120X410 LS TBC100X320-1B TBC120X410-4 F100X320 F120X410 LSRH TBC100x320-2RA TBC120X410-3R FBP Assembly SEGMEN1,9 4,1 FBB TBB FES Thrust CESA 24 14 F100X410 126 LS TBC100X410-3 F100X410 F120X440 LSLH TBC100X410-4L 279 100 120 3,9" 4,72" F100X410 TBC120X440-2LB 11,5 127 277 F120X440 F120X440 LSRH TBC100X410-4R TBC120X440-2RB 41,9 92 F120 LSLH TER BASE BOLT-ON VERTIKALBESKYTTELSE Blocks TBC120X440-1B 3,9 8,5 FCB TCB 26-2A/LA 14 F140X420 133 F100X430 LS TBC140X420-1A TBC100X430-1 F140X420 F100X430 LSRH TBC140X420-2RA TBC100X430-2R 140 3,9" 5,5" F100X430 F140X420 LSLH TBC100X430-2L 383 100 TBC140X420-2LA 11,5 174 293 STANDARD 2 LÅSEMULIGHETER: Kg Lb Part# Cross PIN EXTFLS 14 F120X330 120 F120X330 LSRH TBC140X575RA TBC120x330-2RA TBC140X575LA 11,5 230 264 506 120 140 4,72" F140X575 LSLH TBC120x330-2LA 5,5" F120X330 F140X575 LS TBC120x330-1A TBC140X57-1A F140X575 STANDARD ELLER SLAGFRI 0,8 1,8 FAB TAP ASSEMBLY FBB Topp 14 F120X410 154 LS TBC120X410-4 F120X410 LSRH TBC160X450-2R TBC120X410-3R Thrust TBC160X450-2L 160 4,72" 6,3" F120X410 236 339 519 120 F160X450 LSLH TBC120X410-3L F160X450 F160X450 TBC160X450-1 FES LÆSEPINNE 4,8 FBP FBP 2,2 vertikalTBP DemonteringsBlocks 14 F120X440 279SHROUDS: 120 LS TBC120X440-1B F160X570 F120X440 LSRH TBC120X440-2RB F160X570 LSLH TBC120X440-2LB 11,5 160 4,72" 6,3" F120X440 F160X570 FES 7,6 segment 16,7 FCP TC`P FUTURA MINING127 LIP verktøy for STANDARD L Sidekuttere in Exstra Part# Cross TBC140X420-1A F140X420 LSRH TBC140X420-2RA BASES AND PINS174 383 140 5,5" F140X420 LSLH TBC140X420-2LA 11,5 F140X420 LS TCCF130-28 FCB TCCF130-21B Base 792 230 360 506 F230X430 LS TCCF130-21C FES 440Standard REF! F40X440 UWS TAW40X4 Thrust 11,5 F140X575 230 140 9,0" 5,5" F140X575 LSLH TBC140X575LA LS TBC140X57-1A F140X575 LSRH TBC140X575RA FCP THRUST Kg Lb Part# Cross BASE 40REF! Blocks SLAGFRI 14 F160X450 F40X600 UWS TAW40X6 600 REF! 236 519 160 6,3" F160X450 LSLH TBC160X450-2L LS TCCF130-16A TBC160X450-1 F160X450 LSRH TBC160X450-2R BLOCKS 0,8 1,8 FAB TAB STANDARD Nedre 14 F160X570 LSEGMENmm Kg F160X570 Lb Part#LSRHCross1,9 Ref4,1 Thrust 505 F50X505 160 6,3" F160X570 LSLH LS in FBB Block TBB L REF! in VertikalPart#UWS TAW50X5 Cross PIN 50 REF! TER BASE TCCF130-28 3,9 8,5FDD32816 FCB TCB REF! segment F50X505B UWS TAW50X5 50 REF! 59,1 130 FES4410 ES4410 TB Slagfri505 796 REF! FE 440 REF! F40X440 UWS TAW40X4 FCB 360 792 230 9,0" F230X430 LS TCCF130-21B SLAGFRI 545 REF! 40REF! F75X545 UWS TBW75X5 LÅSEPINNE TCCF130-21C FCP 600 REF! 75 REF! F40X600 UWS TAW40X6 TCCF130-16A L in Part# Cross Ref Base Pin BLOCKS Cross Ref EXSTRA UWSF75X655 UWS 655 REF! FPDE BASE TOPP L mm in Kg Lb Part# Cross Ref Thrust Block 505 REF! F50X505 UWS TAW50X5 Kg Lb Part# Cross EXTFLS FDE52115 TB REF! F90X855 UWS TBW90X8 50 REF! Kg. Lb TB Part# Cross Ref VERTIKAL440 REF! F40X440 UWS TAW40X440-1A FDD33095 PDD33095#1 855 REF! 90 F50X505B UWS TAW50X5 505 REF! 50 REF! 796 REF! FAB FAP 59,1 130 FES4410 ES4410 FDD32816 TB 40REF! 0,8 1,8 FAB TAP SLAGFRI SEGMENT F40X600 UWS TAW40X600-1FE 600 REF! FDE51413 PDE51413#3 B90 34,6 76 TBFEB90 760 REF! 120 REF! F120X760 UWS TAW120X F75X545 UWS TBW75X5 545 REF! 2,2 4,8 FBP TBP Demonterings80 3,1" REF! F140X800 UWS TBW140X 75 REF! L 100 3,9" B90L 36,4 80 TBFEB90 L mm in Kg Lb Part# Cross Ref Thrust Block 505 REF! F50X505 UWS TAW50X505-2 FDD32816 PDD32816#1 800 REF! 140 7,6 16,7 FCP TC`P F75X655 UWS 655 REF! FPDE FAB FAP verktøy for 50 REF! EXSTRA BASE Thrust 36,0 FES 79 TB FEB90 R FDE52115 TB B90R F50X505B UWS TAW50X505-1A 505 REF! FDD32816 PDD32816#1 796 REF! 50 REF! 59,1 130 FES4410 ES4410 FDD32816 TB FPDE Sidekuttere 855 REF! 90 REF! F90X855 UWS TBW90X8 Blocks Kg Lb Part# Cross EXTFLS Extra Base CESA Ref 24 F75X545 UWS TBW75X545-1A 30º FDE1987 545 REF! Kg. 92 Lb F120 Part# Cross Cross Ref Ba Part# 42,0 LS PDE51987#2L 26-2A FBB FBP FDE1987 TBLH 75 REF! 760 REF! 120 REF! F120X760 UWS TAW120X Kg Lb FDE52115 STANDARD TB 1,8 Part# 0,8 FAB Cross TAP TBRH PDE51987#2R SLAGFRI F75X655 UWS 655 REF! FPDE BASE EXSTRA BASE FEB90 B90 34,6 76 50 REF! F50 LWS TAW50-1 F CESA 24 4,8 FAB 2,2 FBP TAB TBP 800 REF! 140 REF! F140X800 UWS TBW140X Demonterings0,8 1,8 4,7" 41,9 92 F120 LSRH 120 FDE52115 TB 80 3,1" 855 REF! 90 REF! F90X855 UWS TBW90X855-1A FBB FBP FDD32678 PDD32678#1 L 100 3,9" 26-2A/RA B90L 36,4 80 TBFEB90 Slagfri 65 REF! F65 LWS TAW65-1 F 7,6 4,1 16,7 FBB FCP TBB TC`P 1,9 verktøy for CESA 760 REF! 120 REF! F120X760 UWS TAW120X760-1 FAB FAP FDD33024 PDD33024#1 SEGMENTER BASE 36,0 FEB90 R B90R24 41,9 79 92 TB F120 LSLH 75 REF! F75 LWS TAW75-1 F 3,9 8,5 FCB TCB Sidekuttere Standard 26-2A/LA Cross Ref Ba Part# CESA 24 TBF120 800 REF! 140 REF! F140X800 UWS TBW140X800-1 FBB FBP FDD33366 PDD33366#1 LS L 90 in 30º 42,0 92SLAGFRI F90 LWS Part#TAW90-1 CrossF REF! 26-2A 50 REF! F50 LWS TAW50-1 F Kg Lb Part# Cross 440 F40X440 TAW40X4 115REF! F115 LWS UWS REF! TAW115-1 F CESA 24 65 REF! F65 LWS TAW65-1 F 0,8 1,8 FAB TAB 120 4,7" 41,9 92 F120 LSRH STANDARD 40REF! Cross Ref Base Pin THRUST Part# LWS 26-2A/RA SLAGFRI NEDRE ToppBLOCKS Cross Ref F40X600 600 TAW40X6 135REF! F135 LWS UWS REF! TAW135-1 F 1,9 4,1 FBB TBB SLAGFRI 75 REF! F75 LWS TAW75-1 F vertikalCESA 24 VERTIKAL50 REF! F50 LWS TAW50-1 FAB FAP 41,9 LSLHCross Part# Block 3,9 8,5 FCB TCB 26-2A/LA LKg mm Lbin L mm in segment Kg 92Lb F120 Part# CrossRef Ref Thrust Thrust Block 505 REF! TAW50X5 F165 F50X505 LWS-RH UWS TBW165-1R 90 REF! F90 LWS REF! 50 REF! TAW90-1 SEGMENT 65 REF! F65 LWS TAW65-1 FAB FAP FDD33808 TB PDD33808 165 FF Exstra TB 132 UWS TAW50X5 505 REF! F165 F50X505B LWS-LH TBW165-1L REF!884 50 REF! 80 130 FES4410 PDE52445 ES4410 FDE52445 FDD32816 TB 796 290 59,1REF!FPDE52445 115 REF! F115 LWS TAW115-1 F TB 75 REF! F75 LWS PDD33808 TAW75-1 FAB FAP FDD33808 Base STANDARD F75X545 UWS TBW75X5 545 REF! 135 REF! 75 REF! F135 LWS TAW135-1 F 90 REF! F90 LWS TAW90-1 FAB FAP FDD33808 Topp TB PDD33808 F75X655 UWS 655 REF! FPDE EXSTRA Lb LFAP mm FDD33312 in vertikalCross Ref BASE Thrust Block F165 LWS-RH TBW165-1R TB Part# 115 REF! F115 LWS PDD33312#1 TAW115-1 KgFAB STANDARD FDE52115 TBNedre STANDARD Posilok® og Posilok® segment Plus er registrerte varemerker for Esco Corporation. Produsenters navn, delenumre, bilder og beskrivelse 165 REF! Fb 855 REF! 90 REF! F90X855 UWS TBW90X8 Vertikal80 REF!FPDE52445 PDE52445 FDE52445 TB 290 FAP 884 REF! F165 LWS-LH TBW165-1L FDD33312 TB 135 REF! F135 LWS PDD33312#1 TAW135-1 132FAB segment Exstra 760 REF! 120 REF! F120X760 UWS TAW120X Kg Lb L mm in Part# Cross Ref Thrust Block F165 LWS-RH TBW165-1R Base 165 REF! FBB FBP FDD33367 TB PDD33367#1 800 REF! 140 REF! F140X800 UWS TBW140X 132 290 884 REF! 80 REF!FPDE52445 PDE52445 FDE52445 TB F165 LWS-LH TBW165-1L 45 98

LS/RH/LH LS/RH/LH LS/RH/LH LS

Cross

TAC9

85 187 Kg Lb 100 3,9" F100X290 LH LSLH TBC1 Cross TBC1 88 194 100 3,9" F100X320 LSLH VENSTRE 45 98 90 3,5" F90X245 LSLH TAC9 126 277 100 3,9" F100X410 LSLH TBC1 79 174 90 3,5" F90X320 LSLH TAC9 133 293 100 3,9" F100X430 LSLH TBC1 85 187 100 3,9" F100X290 LSLH TBC1 120 264 120 4,72" F120X330 LSLH TBC1 3,9" F100X320 LSLH TBC1 88 194 Cross Ref 100 Base+Pin 154 339 120 4,72" F120X410 LSLH TBC1 126 277 100 3,9" F100X410 LSLH TBC1 TAC90X245-2RA FAB F120X440 LSLH TBC1 127 279 120 4,72" 133 293 100 3,9" FAP F100X430 LSLH TBC1 TAC90X320-6R 174 383 140 5,5" F140X420 LSLH TBC1 120 264 120 4,72" F120X330 LSLH TBC1 TBC100X290-4R 230 506 140 5,5" F140X575 LSLH TBC1 154 339 120 4,72" F120X410 LSLH TBC1 TBC100x320-2RA 236 519 160 6,3" F160X450 LSLH TBC1 127 279 120 4,72" F120X440 LSLH TBC1 TBC100X410-4R 160 6,3" F160X570 LSLH TBC1 174 383 140 5,5" F140X420 LSLH TBC100X430-2R LSLH

TBC120X410-4

TCCF130-28 FUTURA MINING LIP SHROUDS: 0,8 1,8 FAB TAP F230X430 LS TCCF130-21B TCCF130-21C BASES AND PINS LÆSEPINNE 2,2 4,8 FBP TBP TCCF130-16A ASSEMBLY

360 792 230 9,0"

FUTURA MINING LIP SHROUDS: Kg Lb BASES AND PINS

F100X410 LSRH

FUTURA MINING LIP SHROUDS: TBC140X57-1A F140X575 LSRH BASES AND PINS F160X450 LSRH TBC160X450-1 β

Lip Shroud

LH 90 3,5" F90X245 LSLH

LSLH β 174 90 3,5" F90X320 LSLH 79 TAC9

ASSEMBLY RH Cross Ref

βº

45 98

R / MELKETENNER

LSLS

Cross Ref

Kg Lb

45 98

Høyre

LSLH LSLH

BASE PIN

EXSTRA BASE 30º

Kg Lb

BASE PIN

Senter Lip Shroud BODY

Venstre

R / MELKETENNER

LSLH

BASE PIN

SEGMENTER / MELKETENNER

30º

LS BODY

30º

SENTER

SEGMENTER/MELKETENNER FOR SVEISING

BOL-ON VERTIKAL SEGMENT. 2 LÅSEMUSEGMENTER/MELKETENNER LIGHETER: STANDARD ELLER SLAGFRI FOR SVEISING

FUTURA GRUVEDRIFT VERTIKALSEGMENTER FUTURA GRUVEDRIFT VERTIKALSEGMENTER

R0X575 LS

TBC140X57-1A

F140X575 LSRH TBC140X575RA

0X450 LS

TBC160X450-1

F160X450 LSRH TBC160X450-2R

R0X570 LS

0X430 LS

F160X570 LSRH TCCF130-28 TCCF130-21B TCCF130-21C TCCF130-16A

30º

N

HØYRE

SENTER EXTFLS

HØYRE

VEDRIFT GMENTER

SEMBLY

SEMBLY

Kg. Lb

Part#

34,6 76

FEB90

Cross Ref

36,4 80

FEB90 L

36,0 79

FEB90 R

80 3,1" 100 3,9"

B90L B90R LSLH

βº

Part#

TAC90X245-1A Cross Ref TAC90X320-5

Cross Ref

RHLSRH F90X320

Base+Pin

TAC90X245-2RA FAB FAP Cross Ref Base+Pin TAC90X320-6R

14 F100X410 F100X290 LS 14 F100X320 F100X430 LS

TBC100X410-3 TBC100X290-3

14 F120X330 F100X410 LS 14 F100X430 F120X410 LS

TBC120x330-1A F100X410 F120X330 LSRH TBC100X410-4R TBC120x330-2RA TBC100X410-3

F120X440 LSLH 279 120 4,72" F120X330 127 264 120

TBC120X440-2LB TBC120x330-2LA

14 F120X330 11,5 F120X440 LS

TBC120X440-1B F120X330 F120X440 LSRH TBC120x330-2RA TBC120X440-2RB TBC120x330-1A

140 4,72" 5,5" F120X410 F140X420 LSLHNedre 383 120 TBC140X420-2LA 174 339 TBC120X410-3L 154 TBC140X575LA 230 279 506 120 140 4,72" 5,5" F140X575 F120X440 LSLHVertikalTBC120X440-2LB 127 segment TBC160X450-2L 160 5,5" 6,3" F160X450 236 383 519 140 F140X420 LSLH TBC140X420-2LA 174

14 F120X410 11,5 F140X420 LS

TBC140X420-1A F120X410 F140X420 LSRH TBC120X410-3R TBC140X420-2RA TBC120X410-4

F140X575 LS 11,5 F120X440

TBC140X57-1A F140X575 TBC120X440-1B F120X440 LSRH TBC140X575RA TBC120X440-2RB

14 F140X420 F160X450 LS 11,5

TBC160X450-1 F160X450 TBC140X420-1A F140X420 LSRH TBC160X450-2R TBC140X420-2RA

F160X570 LSLH 230 506 160 140 6,3" 5,5" F140X575

14 F140X575 F160X570 LS 11,5

TBC140X57-1A

F160X570 LSRH TBC140X575RA F140X575

14 F160X450 LS 14 F230X430 F160X570 LS LS

TCCF130-28 TBC160X450-1 TCCF130-21B TCCF130-21C TCCF130-16A TCCF130-28 TCCF130-21B TCCF130-21C TCCF130-16A

F160X450 LSRH TBC160X450-2R

VERTIKALBESKYTTELSE

TBC140X575LA

UWS TBC160X450-2L

F160X450 LSLH F160X570 LSLH

F230X430 LS

S:

DemonteringsEXTFLS verktøy for Sidekuttere DemonteringsNEDRE verktøy for VERTIKALSidekuttere

F100X410 LSRH TBC100X290-4R TBC100X410-4R F100X290

TBC100X430-1 F100X320 F100X430 LSRH TBC100x320-2RA TBC100X430-2R TBC100X320-1B TBC120X410-4 TBC100X430-1

F120X410 LSRH TBC100X430-2R TBC120X410-3R F100X430

30º

SEGMENT

30º

FUTURA GRUVEDRIFT VERTIKALSEGMENTER FUTURA GRUVEDRIFT VERTIKALSEGMENTER 15

STANDARD STANDARD L

in

440 REF! L REF! in 600

Thrust Block AGFRI FDD32816 TB

440 505 REF!

Thrust Block

505 545 REF!

FDD32816 TB BASE 15 TB

505 655 REF!

600 505 REF!

Part#

40REF! 40REF! 50 REF!

Cross Ref

Base Pin

BLOCKS

Cross Ref

F40X440 UWS TAW40X440-1A

FDD33095 TB PDD33095#1

F40X440 F50X505 UWS TAW40X440-1A TAW50X505-2

FDD33095 FDD32816 TB PDD33095#1 PDD32816#1

FAB FAP Part#UWS TAW40X600-1 Cross Ref Base Pin FDE51413 BLOCKSTB Cross Ref F40X600 PDE51413#3 F40X600 F50X505BUWS UWS TAW40X600-1 TAW50X505-1A

FAB FAP

FDE51413 FDD32816 TB TB PDE51413#3 PDD32816#1

FDD32816 TB FAP FDE1987 TBLH FAB FBB FBP FDE1987 TBRH F50X505B UWS TAW50X505-1A FDD32816 TB F75X655 UWS

PDD32816#1 PDE51987#2L PDE51987#2R PDD32816#1

F75X545 UWS TBW75X545-1A 545 855 REF! 90 REF! F90X855 TBW90X855-1A FBB FBP FDD32678 TB FBB FBP FDE1987 TBLH 75 REF! FDE1987 TBRH 655 F120X760UWS UWS TAW120X760-1 FAB FAP FDD33024 TB 760 REF! 120 REF! F75X655

PDD32678#1 PDE51987#2L PDE51987#2R PDD33024#1

50 75 REF!

F50X505 TAW50X505-2 F75X545 UWS TBW75X545-1A

Øvre Vertikalbeskyttelse

Extra Base

FCB FCP

34,6 76

FEB90

36,4 Kg. 80 Lb

FEB90 Part# L

36,4 42,0 36,0 41,9 42,0 41,9 41,9

80 3,1" 100 3,9"

B90 B90LRef Cross

FEB90 B90R FEB90R B90 80 3,1" 80 B90L24 92 FEB90 F120 LSL 100 3,9" CESA 26-2A 79 FEB90 R B90R CESA 24 92 F120 LSRH 120 4,7" 26-2A/RA CESA 24 92 F120 LS 26-2A CESA 24 92 F120 LSLH 26-2A/LA CESA 24 92 F120 LSRH 120 4,7" 26-2A/RA

41,9 92 F120 LSLH

2 LÅSEMUSLAGFRI TB PDD33367#1 2 LÅSEMUSLAGFRI

VertikalFBBbeskyttelse FBP

FCB FCP

F160X570 LSRH

36,0 76 79 34,6

LWS

FBB FBPNedre

SEGMENTER/MELKETENNER FOR SVEISING SEGMENTER/MELKETENNER Kg. LbSVEISING Part# Cross Ref FOR

FE

EXTFLS

30°

F100X290LSRH LSRH TAC90X245-2RA TBC100X290-4R FAB F90X245 TBC100X320-1B F90X320 F100X320LSRH LSRH TAC90X320-6R TBC100x320-2RA FAP TAC90X320-5

FE

7 TBLH PDE51987#2L 7 TBRH PDE51987#2R

BASE 15 TB

RH

F90X245 LSRH

277 100 3,9" F100X290 F100X410 LSLH TBC100X410-4L 126 TBC100X290-4L 85 187 Topp vertikal293 100 3,9" F100X320 F100X430 LSLH TBC100X430-2L 133 TBC100x320-2LA 88 194 segment TBC120x330-2LA 120 277 264 100 120 3,9" 4,72" F100X410 F120X330 LSLH TBC100X410-4L 126 Exstra TBC120X410-3L 120 3,9" 4,72" F100X430 154 293 339 100 F120X410 LSLHBaseTBC100X430-2L 133

360 792 230 9,0"

AGFRI

LSRH

TBC100X290-3 TAC90X245-1A

TBC100x320-2LA TAC90X320-6L

S:

1,8 FAB TAB TB PDD33808 4,1 FBB Cross TBB Lb Part# TB FCBPDD33808 8,5 TCB 1,8 FAB TAB TB PDD33808 4,1 FBB TBB TB PDD33312#1 8,5 FCB TCB TB PDD33312#1

Cross Ref

LS

14 F90X245 LS Part#LS 14º F90X320 β

16 TB PDD32816#1

Lb TBPart# Cross 78 PDD32678#1 1,8 FAB TAP 24 TB PDD33024#1 4,8 FBP Cross TBP Lb Part# 66 TB PDD33366#1 16,7 FCP TC`P 1,8 FAB TAP 4,8 FBP TBP OCKS Cross Ref 16,7 FCP Cross TC`P Lb Part#

LSRH

14 F100X290 LS F90X245 LS 14 F90X320 F100X320LS LS

16 TB PDD32816#1

95 TB PDD33095#1

LS

F120 LS

13 TB PDE51413#3

Cross Ref

β

Demonteringsverktøy for Sidekuttere

B90

CESA 24 26-2A LH Cross Ref LSLH CESA 24 120 4,7" 41,9 92 F120 LSRH 45 98 90 3,5" F90X245 LSLH 26-2A/RA TAC90X245-2LA Kg Lb 90 3,5" F90X320LHLSLH CESA Cross 79 174 TAC90X320-6L 24 Ref 41,9 92 F120 LSLH 26-2A/LA TBC100X290-4L 85 187 3,9" F90X245 F100X290LSLH LSLH TAC90X245-2LA 45 98 100 90 3,5" 42,0 92 Kg Lb

TOPP 236 519 160 6,3" VERTIKAL360 792 230 160 9,0" 6,3" SEGMENT

e

FE β

3,9" F90X320 88 174 194 100 F100X320LSLH LSLH 90 3,5" 79

CKS

SENTER

FOR SVEISING

30º

N

FCP

VENSTRE SEGMENTER / MELKETENNER FOR SVEISING SEGMENTER/MELKETENNER

FE

30º

VENSTRE FCB

Topp vertikalsegment Topp vertikalsegment

CESA 24 26-2A/LA

Exstra Base Exstra Base Nedre Vertikalsegment Nedre Vertikalsegment VERITIKALBESKYTTELSE

TOPP ØVRE VERTIKALUWS SEGMENT TOPP VERTIKALSEGMENT

UWS UWS

855 90 REF! F90X855 F140X800UWS UWS TBW90X855-1A FDD33366 TB PDD32678#1 800 REF! 140 TBW140X800-1 FBB FBP FDD32678 PDD33366#1 760 REF! 120 REF! F120X760 UWS TAW120X760-1 FAB FAP FDD33024 TB PDD33024#1 CrossTBW140X800-1 Ref Base Pin THRUST BLOCKS Cross Ref F140X800 UWS FDD33366 TB PDD33366#1 800 REF! 140 REF! Part# FBB FBP

Thrust Block FDE52445 TB

50 REF!

F50 LWS

65 REF! 50 75 REF!

TAW50-1

FAB FAP

Part# F65 LWS

Cross Ref TAW65-1

Base Pin FAB FAP

THRUST BLOCKS Ref FDD33808 TB Cross PDD33808

F50 F75 LWS

TAW50-1 TAW75-1

FAB FAP

FDD33808 TB

PDD33808

65 90 REF!

F65 F90 LWS

TAW65-1 TAW90-1

FAB FAP

FDD33808 TB

PDD33808

75 REF! 115

F75 LWS F115 LWS

TAW75-1 TAW115-1

FAB FAP

FDD33808 FDD33312 TBTB

PDD33808 PDD33312#1

90 REF! 135

F90 LWS F135 LWS

TAW90-1 TAW135-1

FAB FAP

FDD33808 FDD33312 TBTB

PDD33808 PDD33312#1

FAB FAP FBB FBP FAB FAP

FDD33312 TB

PDD33312#1 PDD33367#1 PDD33312#1

115 REF! 165 REF! 135 REF!

F115LWS-RH LWS TAW115-1 F165 TBW165-1R F135LWS-LH LWS F165

TAW135-1 TBW165-1L

FDD33367 TB FDD33312 TB

Thrust Block F165 LWS-RH TBW165-1R 165 REF! FBB FBP FDD33367 TB FDE52445 TB F165 LWS-LH TBW165-1L Esco Corporation. Produsenters navn, delenumre, bilder og beskrivelse brukes kun som referanse Esco Corporation. Produsenters navn, delenumre, bilder og beskrivelse brukes kun som referanse

LWS NEDRE VERTIKALNEDRE VERITIKALBESKYTTELSE SEGMENT LWS NEDRE VERTIKALLWS SEGMENT

PDD33367#1

15 15 Steel solutions for tough conditions

23

GRAVE- OG HJULLASTERSKUFFER

GRAVESKUFFER For graveskuffer fra 0,5 til 50 tonn har vi et samarbeid med en ledende norsk produsent. Vi har også et samarbeid med en stor europeisk OEM-produsent av graveskuffer over 50 tonn. Vi kan levere graveskuffer helt opp til 20 kubikk, med de fleste hurtigfester, til alle applikasjoner og maskiner. For alle maskinstørrelser fra 0,5 til 400 tonn leverer vi det meste, ikke begrenset til: • Graveskuffer • Dyrkningsskuffer • Steinklyper • Pusseskuffer • Hurtigfester • Sveisegrind

SIDETIPPSKUFFER Vi tilbyr det norske markedet høykvalitets sidetippskuffer fra en ledende europeisk OEM-produsent.

Skuffene er tilpasset det norske markedet og dets behov for høykvalitets skuffer.

Solide sidetippskuffer leveres med: • Tenner og segmenter • Sliteplater • Hardox 450 • Kan tilpasses eget ønske 24

(Avhengig av applikasjon skuffen/tilbehøret skal brukes i, vil vi for det meste bruke Hardox 450 når vi får laget skuffer. Fronten vil alltid være HB500, uavhengig om det er fast kniv, bolt-on-stål, eller tenner som skal monteres.)

HJULLASTERSKUFFER Vi tilbyr hjullasterskuffer fra 5 til 22 kubikk Hjullasterskuffene kan leveres med alle tannsystemer som eksisterer i markedet. Solide hjullasterskuffer fra en ledende europeisk OEM-produsent.

Kan fås med hvilket som helst tannsystem og segmenter eller med bare sliteplater.

UNDERSTELL Nordic Roads leverer både stål og gummibelter til de aller fleste maskinene. Vi kan levere understell til de aller fleste maskiner – både som enkeltdeler og som komplette sett satt sammen av våre fagfolk.

Ta kontakt med oss og få et godt tilbud på kvalitetsprodukter fra Italia!

• Komplette belter • Sprocket • Ledehjul • Belteplater • Rullere • Bolter og muttere

Steel solutions for tough conditions

25

BYG spare parts for hydraulic breakers are manufactured with processsing methods including cutting, heat treatment and polishing.

Los repuestos para martillo de la marca BYG han sido fabricados con varios procedimientos, incluído el corte, tratamiento térmico y pulido.

5

MEISLER/SPETT TIL HYDRAULISKE SLAGHAMMERE

Nordic Roads leverer velprøvde meisler i de fleste utførelser og dimensjoner – selvfølgelig i beste kvalitet.

Meisel med spiss, fire sider (Moil) Meisel med kileformet ende (Wedge) Meisel med butt ende, ekstra tykk (Super Blunt) Meisel med butt ende (Blunt) Meisel for asfaltkutting (leveres i to vinkler) Meisel for komprimering (rund «plate» på enden)

MOIL TYPE

26

BLUNT TYPE

WEDGE TYPE

SUPER BLUNT TYPE

SLITERIBBER

ART. Nr.

L (mm)

B (mm)

T (mm)

Kg

L6B80T20

6100

80

20

78

L6B80T15

6100

80

15

57

L6B80T10

6100

80

10

38

L6B200T20

6100

200

20

192

L6B150T25

6100

150

25

180

L6B150T20

6100

150

20

144

L6B150T16

6100

150

16

115

L6B130T30

6100

130

30

187

L6B130T25

6100

130

25

156

L6B120T20

6100

120

20

115

L6B100T30

6100

100

30

144

L6B100T25

6100

100

25

120

L6B100T20

6100

100

20

96

L6B100T15

6100

100

15

72

L6B100T10

6100

100

10

48

SLITERIBBER

Andre dimensjoner er tilgjengelige.

FRA STÅLVERKET – DIREKTE TIL DEG! Dette gjør oss meget konkurransedyktige på pris.

Kort og godt – best i markedet. Våre sliteribber er valset og herdet til 500HB og er laget av verktøystål.

Stålet kombinerer seighet, slitestyrke og gode bearbeidingsegenskaper og gir dermed optimal beskyttelse mot slitasje.

PROFILSTÅL

Steel solutions for tough conditions

27

SKJÆRESTÅL I 500 HB Skjærstålet er 500 HB gjennomherdet og lett sveisbart.

Lengden på disse er 6 meter, men andre lengder – og dimensjoner – er tilgjengelige.

SKJÆRESTÅL

ART. Nr.

28

L (mm)

B (mm)

T (mm)

Fasvinkel

Kg 115

SK6B150T16

6200

150

16

24

SK6B150T20

6200

150

20

23

135

SK6B200T20

6200

200

20

27

182

SK6B200T25

6200

200

25

23

231

SK6B250T25

6200

250

25

23

281

SK6B250T30

6200

250

30

23

342

SK6B280T32

6200

280

32

23

410

SK6B300T30

6200

300

30

23

419 489

SK6B300T35

6200

300

35

23

SK6B300T40

6200

300

40

23

558

SK6B400T40

6200

406

40

25

722

SK6B400T50

6200

406

50

25

943

SK6B500T50

6500

500

50

25

1224

SK6B500T60

6500

500

60

25

1458

Steel Steel solutions solutions for for tough tough conditions. conditions

2929

30

Steel solutions for tough conditions

31

AD. MOMENT

Nordic Roads AS Stülverksvegen 85, 4100 Jørpeland Telefon: +47 51 74 20 50 E-post: post@nordicroads.as

Steel solutions for tough conditions

nordicroads.as