Leyton KBB Brochure 2020

K I T C H E N B E D R O O M & B AT H R O O M L E D L I G H T I N G

1

CONTENTS Lighting for kitchens, bedrooms

3

and bathrooms How to plan your lighting design

4

Lighting function

7

Colour & function

8

Lighting multifunction spaces

11

Lighting control

14

Smart control

16

LED tape & profile

19

White LED tape

22

Changeable white LED tape

24

Colour changeable (RGB) LED tape

26

Dotless & seamless LED tape

28

Flexible linear light LED

30

White side‑emitting LED tape

31

LED tape profile

33

Surface profile

36

Recessed profile

38

Specialist profiles

40

Cabinet lighting

43

COB LED lighting

44

Driverless LED lighting

47

LED lighting

48

Changeable white LED lighting

50

Motion sensor LED lighting

52

Strip lighting

54

Plinth lighting

57

Ceiling lighting Ceiling downlights Pendant lighting

59 60 65

Contemporary pendants

66

Statement pendants

70

Glass pendants

71

Vintage pendants

72

Lamps for pendants

74

Bathroom lighting

77

Bathroom cabinet lighting

78

Ceiling floor and wall lighting

80

Other lighting & accessories

83

Other lighting

85

Powerports and chargers

86

Sensors, drivers & controllers

89

2 measurements in this brochure are in millimetres unless otherwise stated.

All

Lighting for kitchens, bedrooms and bathrooms In an age where the spaces we inhabit are becoming multifunctional with their traditional usages becoming blurred, effective lighting design has become more important than ever. Lighting design not only enhances interior designs but also creates different mood spaces within the same room and, in doing so, expands its use and function.

In this edition of Leyton KBB we will introduce you to the concepts needed to create different lighting moods, show you the fittings required to realise your vision and explain the controls available for your customers to switch between different lighting schemes easily.

3

3

How to plan your lighting design The key to any successful lighting design is to lay down different types of light in layers.

A good place to start is the background or ambient lighting.

If the room has a clear function (such as a bedroom or bathroom) choose a brightness and colour temperature that best suits it. If the room has many functions, you might want to think about the use of smart lighting or secondary lighting to replace the ambient light when it is turned off.

Next, consider the specific activities that happen in the room. Remember, a room with a relaxed ambient light may still require areas of strong, purposeful light. Examples of this are reading lights in the bedroom or shaving lights in the bathroom. This is often referred to as task lighting.

Now, look at introducing your accent lighting. Use this light to illuminate decorative detail, colours, textures or architectural features.

Lastly, if appropriate, add your pendant lighting. These pieces, typically, are beautiful objects in their own right.

They may be used as ambient, task or accent lighting.

By blending all of these different layers of light together you will create a space that is lit practically, appropriately and beautifully.

4

ambient lighting

task lighting

accent lighting

pendant lighting

Design by JS Geddes

5

Design by Schuller

6

Lighting function There are three lighting groups you need to consider when lighting a room. Using all three will not only give you a great overall effect but will provide flexibility to perform the wide range of functions the room may need to accommodate. This is especially important in kitchens. The change from a bright, energetic light for daytime tasks, to a relaxed space after work and through to an intimate atmosphere for evening dining should be seamless and effortless.

Ambient lighting

Task lighting

Accent lighting

Ambient lighting is a room’s overall illumination. It takes many forms including ceiling mounted or recessed fixtures that direct light downwards and wall lights and uplighters that wash both walls and ceiling with light.

Task lighting is functional lighting that helps you with everyday activities – preparing food, reading and dressing.

Under cabinet lights, spot lights and strip lights are all obvious examples of task lighting.

Accent lighting adds drama to a room and can significantly affect its mood.

Careful placement of accent lighting allows you to change the room from a bright, energetic space to a relaxed sanctuary instantly.

7

Colour & function

Extra warm white

The colour, or temperature, of white light is an important consideration when creating a lighting design. White light temperature ranges from warm evening light (with a low kelvin measurement) through noon-time neutral light to bright, cool white (with a high kelvin measurement). Each has its place in your overall lighting scheme.

In multifunctional rooms, such as kitchens and bathrooms, a room may need to switch between different white temperatures. In these instances, choosing lighting that can be changed through WiFi enabled applications or other devices is particularly helpful.

Choosing the right white temperature for ambient lighting The primary function of the room will often help you decide on the temperature of the ambient white light.

Rooms used at the end of the day or spaces where you enter from the dark tend to be more suited to a warmer temperature colour. Entrance hallways and living areas are good examples of this. If it is a multifunction room, choose a neutral white tone or a smart lighting system that will allow you to switch between temperatures. The physical characteristics of the room can also indicate the best temperature to use.

Contemporary spaces with large flat planes are best suited to a cool or neutral white colour, while more traditional room designs, with expanses of wood features, might benefit from a warmer white temperature.

8

Choosing the right white temperature for task lighting The tone of white for task lighting depends somewhat on the activity undertaken. A warmer white temperature is generally easier on the eye when reading, but if you are cooking or preparing food it is preferable to have a neutral white colour so you can judge the food's freshness or readiness to serve.

White colour and accent lighting The choice of white colour in lighting individual objects or spaces depends on the object or space you are highlighting.

The temperature of white light affects our perception of the colour it is illuminating. It's important to bear this in mind if you have an interior design with a strong colour motif. A cooler white colour looks great with contemporary work surfaces and chrome accessories, whereas a warm white colour might be more appropriate with wood and highlights gold flecks in high gloss granite beautifully. For extra ambience especially with dark woods extra warm white tapes are becoming increasingly popular.

2700 Kelvin

Warm white

Neutral white

Cool white

3000 Kelvin

4000 Kelvin

6500 Kelvin

9

10

Lighting multifunction spaces Daytime lighting palette Using a mix of ambient, task and accent lighting you can create very different environments within the same room. Here's an example of how a combination of different lighting can be used to create a design for a daytime task-orientated kitchen.

Task – in-cabinet lighting Automatically activated by discreet sensors when the doors are opened, these purely functional LED spotlights do not affect the overall lighting scheme of the room.

Ambient – ceiling spot lighting A bright array of overhead LED spot lighting, suitable for a busy kitchen environment, can be dimmed as the function of the room changes.

Task – under-cabinet lighting Under-cabinet COB spot lights provide an even illumination across the worktop surface and the splashback.

Task – under-cabinet lighting Strong, bright task lighting, in this instance in the form of undercabinet RGB & White LED tape, provides a bright continuous expanse of light for manual activity.

11

12

Evening lighting palette Here's the same room with a different combination of lighting activated to create a lighting design perfect for the end of the day wind down.

Accent - above cabinet lighting LED tape, running along the tops of these cabinets, creates a soft wash of warm light against the back wall and ceiling.

Accent - in-cabinet and shelf lighting A mixture of LED shelf tape housed in a recessed profile and light fixtures remain on in this evening setting to provide focused areas of interest and to provide a sense of depth to the room.

Accent - island lighting LED tape is used both under the worktop surface and on the plinth to make a feature of the island.

Accent - plinth lighting Plinth lighting around the main body of cabinets throws light on the floor creating a softly lit walkway.

Simple to control Control of sophisticated lighting schemes like this is now simple.

The latest range of smart lighting, along with control units and WiFi enabled apps and voice control devices, such as Alexa, make switching between lighting schemes effortless.

13

Lighting control As multifunctional, open spaces have become more commonplace in room design so the need to change the mix of ambient, task and accent lighting throughout the day has become more important. Altering this mix manually can be time consuming and laborious. By using the right control technologies you can effortlessly switch between combinations of light and completely transform the mood and function of a room in an instant. Here are a few of the ways to control your lighting schemes.

14

Automatic control

Dimmers

This ranges from simple switches and sensors that activate lighting inside a cabinet when the door is opened, to sophisticated gestural control sensors that can control the brightness of light depending how close your hand is.

These controls are not only functional and practical, but deliver light on demand without upsetting the ambient mood of the room.

Dimmers are still a very useful way of controlling large areas of light simply and intuitively. Our latest range of LED drivers now enable you to control LED lighting consistently and sensitivity from a standard wall dimmer. This is a breakthrough for LED lighting and can be used with your room’s ambient lighting or with groups of accent or task lighting.

Four zone control

Home automation systems

A great balance between simplicity and flexibility, four zone or scheme dimming controls allow you to adjust the brightness, colour temperature and colour of lighting in up to four different zones, either individually or collectively. The controls can be either wallmounted, remote or app controlled. The wall-mounted panel works wirelessly with a receiver, and has a range of 20m for the remote control.

The ultimate in lighting control. With the correct interfaces, our LED lighting can seamlessly integrate with home automation systems such as Lutron and Rako. These advanced systems also integrate with other technology allowing you to change your visual environment at the touch of a button. These can automatically change to suit the time of day or even the season.

15

Smart control One of the biggest recent advancements in lighting has been the use of WiFi to control lighting units. Most of the LED lighting in this KBB book can be integrated into a WiFi network with a controller that simply plugs into the lighting driver. You can find these controllers on page 93.

16

Once on a WiFi network there are a couple of different ways to program and control your lighting. A variety of standalone operating platforms exist in lighting eg Wiz. However, for ease of use these can all be simultaneously controlled via a voice control app such as Amazon Alexa or Google home.

Whichever control device you choose to use, they will not only give you complete control over the light's brightness, temperature and colour but will also enable you to program different combinations of lighting that can be activated instantly.

Whatever platform you choose to make your WiFi enabled lighting design, it's easy with our plug and play controllers. With these, most of the lighting in this book can become smart lighting.

1. Choose the lighting you with to control over WiFi.

2. Simply attach the appropriate controller to the driver.

“ Alexa... evening lighting �

3. Connect the enabled lighting and program with a downloadable app.

4. Control, effortelssly, through your phone, tablet or choice of smart speaker.

17

18

LED tape & profile 22. White LED tape 24. Changeable white LED tape 26. Colour changeable (RGB) LED tape 28. Dotless & seamless LED tape 30. Flexible linear light LED 31. White side-emitting LED tape

19

LED tape and profile LED tape is increasingly playing a bigger part in lighting for kitchens, bathrooms and bedrooms. Its versatility and durability make it ideal for all kinds of lighting environments; from high lumen task intensive areas through to low lumen accent lighting to highlight the rooms architectural features.

With the use of an appropriate profile, tape can be elegantly mounted or recessed on or into surfaces and with the use of the right diffuser, the light from the tape can be altered to achieve a desired effect, or even be hidden against dark surfaces.

The colour of LED tape White LED tape, as the name suggests, provides a consistent bright, dimmable white light, which is available in range of temperatures from extra warm through to cool white.

Coloured LED tape is able to create millions of colours. By using three chips (red, green and blue) it works in a similar way to your television or computer screen. Each diode can be controlled independently to create the perfect colour to match your mood.

Some of our RGB LED tapes have an extra white diode which makes switching to white light happen instantly. This is ideal in rooms that have multiple uses where switching between a functional and recreational environment happens frequently.

Design by Dimension DMI

20

The brightness of LED tape The brightness of LED tape is most easily expressed as watts per metre.

The higher number of diodes per metre the higher the wattage. Chose low watt per metre tape for low level ambient or accent lighting and high watt per metre tape for task lighting and sight critical environments.

Side emitting LED tape This LED tape emits light from its edges rather than from its surface. It creates light that is parallel to the surface it is attached to. This is particularly useful for lighting around curved worktops and for uplighting curved architectural features.

Dotless and seamless light The fewer diodes per metre in LED tape the more likely the individual diodes may be seen. This becomes an issue if the tape is reflected in a high gloss surface, such as a highly polished worktop or floor. Dotless LED and seamless tapes have a high wattage and diode count per metre. When dotless tape is used with an appropriate profile and diffuser it creates an almost pure strip of light where the individual diodes are not visible. Seamless tape creates the same intense strip of dotless light but without the need for a profile and diffuser. This makes it ideal for curved surfaces.

IP rated LED tape An IP rating is a measurement of the protection an item will have against the ingress of dust, dirt and water.

IP rated LED strips come with a silicone coating making them waterproof to varying degrees.

Below: the easiest way to choose the right level of brightness for your tape is by comparing the relative watts per metre.

C. 9.6w per metre – an all-round solution for task lighting especially under-cabinet.

A. 2.4w per metre – is well suited for soft accent lighting such as plinth lighting.

A higher IP rated tape is ideal for installing in kitchens, wash-up areas, bathrooms and wet rooms. A lower rated tape is suitable for tape that might need cleaning with a damp cloth or where it might be splashed with water.

D. 19.2w per metre – for strong task lighting, architectural lighting and flooding walls.

B. 4.8w per metre – stronger area accent lighting and ambience.

A.

B.

C.

D.

21

White LED tape From bright white task lighting to accent and mood lighting our white LED tape is available in different levels of brightness and colour temperatures. IP rated tape is also available for bathrooms and areas that may come into contact with water.

WHITE 30 Volt: 12

WHITE 60

Watt/Metre: 2.4

Colour

Lumens

Cool Neutral Warm

IP rating

Max length: 10m CODE

240 65 FX30-IPWH 200 65 FX30-IPNW 180 65 FX30-IPWW

WHITE 120 Volt: 12

Lumens

IP rating

Max length: 10m CODE

Cool Neutral Warm

960 - FX120-12-CW 840 - FX120-12-NW 720 - FX120-12-WW

Cool Neutral Warm

960 65 FX120-12IPCW 840 65 FX120-12IPNW 720 65 FX120-12IPWW

22

Watt/Metre: 4.8

Colour

Lumens

Max length: 10m

IP rating

CODE

Cool Neutral Warm

480 - 420 - 360 -

FXLED-WH FXLED-NW FXLED-WW

Cool Neutral Warm

480 65 FXLED-IPWH 420 65 FXLED-IPNW 360 65 FXLED-IPWW

WHITE 240

Watt/Metre: 9.6

Colour

Volt: 12

Volt: 12

Watt/Metre: 19.2

Colour Cool Neutral Warm

Lumens

IP rating

Max length: 3m CODE

1920 - FX240-12-CW 1680 - FX240-12-NW 1440 - FX240-12-WW

23

Changeable white LED tape Being able to adjust the temperature of white LED tape from cool to warm gives you complete flexibility in creating lighting palettes and moods for your room-sets.

DOTLESS WHITE CHANGEABLE Volt: 24

Watt/Metre: 17.2

Max length: 5m

Colour

Lumens

CODE

CT

826-847

FX-HDCT-24

WHITE CHANGEABLE Volt: 24

Watt/Metre: 9.6

Colour

Lumens

CT

720/840 *

24

IP rating

Max length: 10m CODE CT120-24

25

Colour changeable (RGB) LED tape Complete colour control using red, green and blue diodes. Create imaginative light palettes for any mood or room. Our RGB and white tape includes an extra white diode which makes switching to white light happen instantly. This is ideal in rooms that have multiple uses where switching between functional and recreational light is required.

COLOUR CHANGEABLE & WHITE TAPE

DOTLESS COLOUR CHANGEABLE

COLOUR CHANGEABLE 30

Volt: 24

Volt: 24

Volt: 12

Watt/Metre: 18

Colour RGB & Cool White RGB & Warm White

26

Max length: 10m

Lumens

IP rating

420 370

- -

CODE FX4RGBCW FX4RGBWW

Watt/Metre: 17.2

Max length: 5m

Colour

Lumens

CODE

RGB

462/625

FX-HDRGB-24

Watt/Metre: 7.2

Max length: 10m

Colour

Lumens

CODE

RGB

480/540

FX30-RGB

Design by Dimension DMI

27

Dotless & seamless LED tape Our dotless LED tape produces a strong task lighting and can be dimmed without creating any dot reflection. When used in a standard aluminium profile it will give a clean continuous pure strip of light without any dots reflecting off the surface.

Our seamless tape produces a dotless effect without the need for a diffuser and profile making it ideal for curved planes and surfaces where profiles can’t be used.

28

DOTLESS COLOUR CHANGEABLE

DOTLESS WHITE CHANGEABLE

Volt: 24

Volt: 24

Watt/Metre: 17.2

Max length: 5m

Colour

Lumens

CODE

RGB

462-625

FX-HDRGB-24

Watt/Metre: 16.6

SEAMLESS

Max length: 5m

Colour

Lumens

CODE

CT

862-847

FX-HDCT-24

Volt: 12

Watt/Metre: 6

Colour

Lumens

Max length: 5m

IP rating

CODE

Cool

480 65 FX-LIP-12-CW

Neutral

480 65 FX-LIP-12-NW

Warm

450 65 FX-LIP-12-WW

Extra Warm

438

65

FX-LIP-12-2700

DOTLESS WHITE Watt/Metre: 7.4/8.6 Volt 12

24

Max length: 5m

Colour Lumens

CODE

Cool 820 Neutral 810 Warm 770 Extra Warm 750

FXSL-12-CW FXSL-12-NW FXSL-12-WW FXSL-12-2700

Cool 820 FXSL-24-CW Neutral 810 FXSL-24-NW Warm 770 FXSL-24-WW

SEAMLESS HIGH POWER Volt: 12

Watt/Metre: 12

Colour

Lumens

Max length: 5m

IP rating

CODE

Cool

900 65 FX-HIP-12-CW

Neutral

880 65 FX-HIP-12-NW

Warm

840 65 FX-HIP-12-WW

Extra Warm

816

65

FX-HIP-12-2700

29

Flexible linear light LED Flexible linear is entirely encapsulated with silicone which acts as its own diffuser. This creates lots of advantages and is particularly helpful when using on curved planes and surfaces. It can also be recessed into surfaces to give a flush finish. Being IP rated makes these tapes versatile solutions for any room.

30

NEON RECESSED Volt: 12

STELLAR

Watt/Metre: 11

Colour

Lumens

Max length: 5m

IP rating

CODE

Neutral

1050 66

NF-12R-NW

Warm

1000 66 NF-12R-WW

Volt: 12

Watt/Metre: 10

Colour

Lumens

IP rating

Max length: 3m kit CODE

Neutral

67 STLR12-3-NW

Warm

67 STLR12-3-WW

White side‑emitting LED tape With specially configured diodes that shine down rather than out this makes it perfect for fitting vertically onto surfaces to create dramatic thin blades of light or for use in curved planes, plinths and shelving.

WHITE 60 Volt: 12

Watt/Metre: 4.8

Colour

Lumens

IP rating

Max length: 10m CODE

Cool Neutral Warm

240 - SELEDR-CW 200 - SELEDR-NW 190 - SELEDR-WW

Cool Neutral Warm

240 65 SELEDR-IPCW 200 65 SELEDR-IPNW 190 65 SELEDR-IPWW

31

32

LED tape profile 36. Surface profile 38. Recessed profile 40. Specialised profiles

Design by Treyone

33

Types of LED tape profile and their use Recessed These profiles can be integrated into many different materials and provide discreet housing for LED tape.

Particularly useful for minimalist designs or where, for practical reasons, the tape needs to sit flush with the surface.

Surface In some areas where the profile will be less visible, for example, behind a pelmet or over a cabinet, there is a practical advantage in fixing the profile and housed tape to the surface.

Specialist Tape can even be housed in profiles specifically designed for other functions.

These include hanging rail profiles and profiles that can bend to match curves or plastered into walls or ceilings.

Plaster In Combining this profile and dotless tape creates a stunning clean light in newly plastered walls.

34

Black effect

Board

Our black diffuser can be used with our recessed or surface mounted profile.

When the tape is off, the effect is a discreet lighting solution that is perfect for dark colours and furniture.

A specialist profile that slides onto the back of shelving and houses LED tape creates an invisible source of light which floods the back of the shelving unit.

35

Surface profile Our surface profiles are available in a range of shapes, and finishes and can be cut bespoke for your projects.

Design by Treyone

36

BENDABLE

ANGLED

Max length: 2m Size 18 x 5.66

Max length: 2m Finish

Diffuser

Aluminium

Opal

CODE SB

RECTANGLE

17.5 x 8

Max length: 2.5m

Size 30 x 11

Finish

Diffuser

CODE

Aluminium

Clear

LAS

RECTANGLE

Max length: 2.5m Size

CORNER

Diffuser

CODE

Size

Aluminium Frosted

JS

11.6 x 15

Black Frosted

JSBK

White Frosted

JSWH

Black Black

JSBK-BK

Aluminium

QUADRANT

Max length: 2m

Max length: 2.5m Finish

Diffuser

CODE

Size

25 x 14

Grey

•

WGL

16 x 16

CODE JCC JCF

Max length: 2m Finish Diffuser

GLASS PROFILE Size

Finish Diffuser

18 x 18 Aluminium Clear Frosted

SIDE EMITTING

Max length: 2.5m Finish

Size

Opal

Finish Diffuser Aluminium

Opal

CODE

Size

JMW

20 x 5

Finish Diffuser Synthetic

•

CODE WESP

CODE JQ

37

Recessed profile Elegant and discreet, recessed profile sits flush against the surface and houses the LED tape out of sight. Particularly useful in minimalist designs where clear lines and uninterrupted planes are important. We can provide a bespoke cutting service for your projects, just let us know what you need.

RECTANGLE-DEEP

RECTANGLE

Max length: 2.5m

Max length: 2.5m Finish Diffuser

CODE

Size

Aluminium Frosted Black Frosted

JR JRBK

25 x 15

Size 24.8 x 7

SQUARE

White Frosted

JRWH

Black Black

JRBK-BK

Max length: 2.5m Finish Diffuser Aluminium

Opal

CODE JSR

Size 10 x 10

PLASTER IN

SIDE EMITTING

SLIMLINE

Max length: 2m

Max length: 2m

Max length: 2m

Size 14.5 x 15

Finish Diffuser Aluminium

Opal

CODE

Size

TNW

6 x 30.5

Finish Diffuser Aluminium Integrated

† Supplied with 24 volt 8 watt side emitting tape

38

CODE

Size

SSEM†

15.5 x 11

Finish Diffuser Aluminium Frosted

Finish Diffuser Aluminium Frosted

CODE J10SQ

CODE UNR

RECESSED Max length: 2m Size

Finish Diffuser

24 x 9

Black

Frosted

Aluminium Frosted

CODE SCAS-BK SCAS

RECTANGLE Max length: 2m Size 15.5 x 10.7

Finish Diffuser Polycarbonate

•

CODE WFL

Design by Treyone

39

Specialist profiles A range of specialist profiles that extend the functionality of lighting. From hanging rails to profiles specially designed for shelf units all available with our bespoke cutting service.

BRACKET Finish

Diffuser

CODE

Aluminium • HR-ENDSET

40

RAIL

SENSOR BRACKET

Max length: 2m

Max length: 78mm

Size 15 x 30

Finish Diffuser Aluminium

•

CODE

Size

WHR

31 x 38

Finish Diffuser Aluminium

•

CODE

HR-PIR-ENDSET

Design by Schuller

Board profile Get stunning effects using this specialist profile that slides over the back edge of shelves and contains and diffuses LED tape. The result is a wash of light from the rear of the shelving unit emanating from what app ears to be an invisible source.

WALL/TILE Size 35 x 45

Diffuser

CODE

Aluminium Frosted

Finish

JCH

BOARD

IP

Max length: 2.5m

Max length: 2.5m

Size 21 x 24

Finish Diffuser Aluminium

Opal

CODE

Size

JB18

16 x 12.6

Finish

Diffuser

Aluminium Frosted

IP rating

CODE

65

JIP65

41

42

Cabinet lighting 44. COB LED lighting 47. Driverless LED lighting 48. LED lighting 50. Changeable white LED lighting 52 Motion sensor LED lighting 54 Strip lighting 55 Linkable modular linear system 57 Plinth lighting

43

COB LED lighting Chip on board LED cabinet lighting provides a bright, uniform light that is perfect for task lighting. Being dotless it creates a beautiful light effect on wall surfaces.

ROUND RECESSED Volt: 12

ROUND SURFACE

Watt: 3

Finish

Temperature Lumens

Aluminium-Matt Cool 280

Size: 9 x 62

Volt: 12

CODE

Finish

DLC-ALU-CW

TRIANGLE

Watt: 3 Temperature Lumens

Size: 12.5 x 62

Volt: 12

CODE

Finish

Watt: 3

Aluminium-Matt Cool 280 DLC-SM-ALU-CW

Stainless Steel

Size: 143 x 128 x 40

Temperature Lumens Cool

280

CODE TRC-SS-CW

Warm 260 DLC-ALU-WW

Warm 260 DLC-SM-ALU-WW

Neutral 270

TRC-SS-NW

Stainless Steel

Cool

DLC-SS-CW

Stainless Steel

Cool

Warm 260

TRC-SS-WW

280

280

DLC-SM-SS-CW

Neutral 270

DLC-SS-NW

Neutral 270 DLC-SM-SS-NW

Warm 260

DLC-SS-WW

Warm 260 DLC-SM-SS-WW

Anthracite Cool 280 DLC-AN-CW

Neutral 270 DLC-AN-NW

Warm 260 DLC-AN-WW

44

Anthracite

Cool 280 DLC-SM-AN-CW

Neutral 270 DLC-SM-AN-NW

Warm 260 DLC-SM-AN-WW

Design by Schuller

45

Design by Now Kitchens

RECTANGLE TARGA Volt: 12 Finish

Watt: 3

SQUARE TARGA Size: 190 x 60 x 5

Volt: 12

CODE

Finish

Temperature Lumens

Watt: 3 Temperature Lumens

Size: 60 x 60 x 5 CODE

Aluminium-Matt Cool 280

Neutral 270

TARGA-CW TARGA-NW

Aluminium-Matt Cool 280 SQ-TARGA-CW

Neutral 270 SQ-TARGA-NW

TARGA-WW

Warm 260

Anthracite Cool 280 TARGA-AN-CW

Neutral 270 TARGA-AN-NW

46

Warm 260 TARGA-AN-WW

Warm 260 SQ-TARGA-WW

Driverless LED lighting Drivers are not required for these mains voltage non dimmable LED cabinet lights.

TRIANGLE (DRIVERLESS)

ROUND SURFACE (DRIVERLESS)

Volt: 240 Watt: 2.5

Size: 143 x 129 x 40

Volt: 240

CODE

Finish

Finish Stainless Steel

Temperature Lumens Cool

210

Watt: 2.5

TRM-SS-3K

Stainless Steel

Size: 17 x 72

Temperature Lumens Cool

210

CODE DLMSM-SS-6K

Neutral 200

TRM-SS-4K

Neutral 200 DLMSM-SS-4K

Warm 190

TRM-SS-6K

Warm 190 DLMSM-SS-3K

47

LED lighting Our LED lighting is available in a wide range of imaginative fittings to suit every design. Some fittings are diffused to avoid dotting.

48

LED - ROUND (RECESSED)

LED - FLAT Volt: 12

Watt: 1.4

Size: 6 x 58

Finish

Colour Lumens

CODE

Satin Silver

Cool 90 LEDF-SC-WH Warm 75 LEDF-SC-WW

ROUND MINI‡ Volt: 12

Watt: 0.4

Finish

Watt: 2

Size: 10 x 65

Finish

Colour Lumens

CODE

Stainless Steel

Cool 160 Neutral 155 Warm 150

DLK-SS-CW DLK-SS-NW DLK-SS-WW

LED - TRIANGLE IP rating: 64

Size: 10 x 30

Temperature Lumens

Chrome

Volt: 12

LED - ROUND (SURFACE)

Cool 40

CODE ELLA-6K

Neutral 35

ELLA-4K

Warm 30

ELLA-3K

Volt:12

Watt: 2

Volt: 12

Watt: 2

Size: 14 x 68

Finish

Colour Lumens

Stainless Steel

Cool 160 DLKSM-SS-CW Neutral 155 DLKSM-SS-NW Warm 150 DLKSM-SS-WW

CODE

LED - SQUARE Size: 130 x 153 x 47

Finish

Colour Lumens

CODE

Stainless Steel

Cool 160 Neutral 155 Warm 150

TRK-SS-CW TRK-SS-NW TRK-SS-WW

Volt: 12

Watt: 1.25

Size: 65 x 65 x 8

Finish

Colour Lumens

Stainless Steel

Cool 100 SQ12-LED-CW-SS Warm 90 SQ12-LED-WW-SS

CODE

‡

can be recessed

LED - MAGRA Volt: 12 Finish

Watt: 5

LED - KWADRA Size: 160 x 60 x 5.5mm

Colour Lumens

Volt: 12

Watt: 2.5

LED - TABULA Size: 150 x 35 x 9

Volt: 12

Watt: 3

Size: 160 x 80 x 8

CODE

Finish

Colour Lumens

CODE

Finish

Colour Lumens

Aluminium Cool 200 MAGRA-CW

Neutral 190 MAGRA-NW

Warm 180 MAGRA-WW

Satin Silver

Cool 210 KWADRA-CW Neutral 200 KWADRA-NW Warm 190 KWADRA-WW

Satin Silver

Cool 220 TABULA-CW Neutral 210 TABULA-NW Warm 200 TABULA-WW

CODE

49

Changeable white LED lighting These LED units enable you to switch between cool bright task orientated lighting to warm end of the day ambience easily, either through smart WiFi enabled devices or through remote controls.

ROUND RECESSED Volt: 12 Colour CCT

50

Watt: 2 Finish Lumens Stainless Steel 150-160

AURA Size: 350 x 95 CODE DLK-SS-CCT

Volt: 12 Colour CCT

AURA ROUND Watt: 2.4

Size: 190 x 50 x 5

Finish Lumens Aluminium 140/150

Volt: 12

CODE

Colour

AURA

CCT

Watt: 2.4 Finish Lumens Aluminium 140/150

Size: 5 x 55 CODE AURA-DL

How to be smart Install our LED lighting, connect them to our Omni receiver and you will be able to instantly control where applicable, the brightness, the colour temperature or colour through a remote controller or through your WiFi enabled smart devices such as Amazon's Alexa or Google Home.

Find out how this works on page 16.

51

Motion sensor LED lighting Often referred to as convenience lighting these LED units are automatically activated via built in passive infrared sensors.

Especially designed for in cabinet use, these are easy to install and are integral to a well thought out room design.

ROMA-BATTERY Volt: Lithium ION Colour Cool

NAPOLI2-BATTERY

Watt: 0.5

Size: 78 x 78 x 13

Finish Lumens Satin Silver

57

CODE ROMA-SQT

DOUBLE DOOR SENSOR Volt: 12 Colour Warm

52

Watt: 5.4 400

Colour

Watt: 1

Size: 21 x 70

Finish Lumens

Warm

Satin Silver

110

CODE NAPOLI2

DRAWER LIGHT Size: 562 x 30 x 15

Finish Lumens Satin Silver

Volt: Lithium ION

ROUND SURFACE CLP

CODE CSL-SAT-3K

Volt: 12

Colour: Neutral

Finish: Satin Silver

Size

Watt

Lumens

462 x 29 x 10 562 x 29 x 10 762 x 29 x 10 862 x 29 x 10 962 x 29 x 10

4.2 5.4 7.8 9 10.2

310 410 590 680 770

CODE SDL-462N SDL-562N SDL-762N SDL-862N SDL-962N

Volt: 12 Colour Warm

Watt: 2.9

Size: 68 x 7

Finish Lumens Satin Silver

100

CODE CLP-SAT-WW

Design by Schuller

53

Strip lighting Classic task lighting for cabinets.

Available in various lengths that can be fitted together to create a modular lighting system.

STRIP LIGHT Volt: 240 Size

54

Finish: White

Watt

Lumens

224 x 23 x 35

3

270

UCLED2-224-6K

CODE

3

255

UCLED2-224-4K

3

245

UCLED2-224-3K

303 x 23 x 35

5

460

UCLED2-303-6K

5

440

UCLED2-303-4K

5

410

UCLED2-303-3K

526 x 23 x 35

8

720

UCLED2-526-6K

8

700

UCLED2-526-4K

8

680

UCLED2-526-3K

903 x 23 x 35

14

1260

UCLED2-903-6K

14

1200

UCLED2-903-4K

14

1130

UCLED2-903-3K

1159 x 23 x 35

16

1460

UCLED2-1159-6K

16

1400

UCLED2-1159-4K

16

1320

UCLED2-1159-3K

Linkable modular linear system The LSP is a modular system of strip lighting that emits a clean linear dotless light and no dark spots even into the corners. It can be easily fitted via supplied brackets or magnets.

LSP LINKABLE DOTLESS STRIP

LSP LINKABLE DOTLESS CORNERS

LSP LINKABLE DOTLESS LEADS

Volt: 24

Volt: 24

Volt: 24

Finish: White

Temperature

Size

Neutral

100 1.33 LSP-100-NW

Watt

CODE

Temperature

Finish: White

Direction

CODE

Anti Clockwise Anti Clockwise

LSP-CACW-NW LSP-CACW-WW

Warm

100 1.33 LSP-100-WW

Neutral Warm

Neutral

300 4 LSP-300-NW

Neutral

Clockwise

LSP-CCW-NW

Warm

Clockwise

LSP-CCW-WW

Warm

300 4 LSP-300-WW

Neutral

580 7.99 LSP-580-NW

Warm

580 7.99 LSP-580-WW

Finish: White

Type

Size

CODE

Input

2M

LSP-INPUT

Link

150mm

LSP-LINK150

55

Design by Treyone

56

Plinth lighting Plinth lighting creates very dramatic accent lighting which accentuates the shape of the room and is especially effective around islands. To do this use either small individual LED lights as shown below or led tape as shown opposite.

SPOT Volt: 240

QUAD Finish: Brushed Chrome

Colour Cool Cool

Watt

Size: 35 Ø x 1 CODE

0.5 LED-PLRND1WH 4 light kit x 0.5 LED-PLRNDWH

MICRO-DISC

Volt: 12/240 Finish: Satin Silver

Size: 38 x 38 x 6

Colour

Watt

Cool Cool

4 x 0.5 LED-PLSQ4WH 2 LED-PLSQ1WH

CODE

SQUARE

Volt: 12/240 Finish: Stainless Steel

Size: 14 Ø x 1

Volt: 12/240 Finish: Stainless Steel

Size: 35 x 35 x 1

Colour

Watt

CODE

Colour

Watt

Cool Warm Cool Warm

0.2 LED-PL2-WH 0.8 LED-PL2-KIT4-WH 0.2 LED-PL2-WW 0.8 LED-PL2-KIT4-WW

Cool Cool Warm Warm

0.6 SQWHLED1SS 2.4 SQWHLED4SS 0.6 SQWWLED1SS 2.4 SQWWLED4SS

CODE

57

58

Ceiling lighting

59

Ceiling downlights Powerful downlights with integrated LEDs, these products are fire rated and dimmable. Perfect for directing light on areas that require good levels of illumination or to highlight design features.

FIXED (8-WATT) Volt: 240

Watt: 8

FIXED (10-WATT)

IP rating: 65

Size: 56 x 69 Ø

Finish

Colour Lumens

CODE

White

Neutral 530 ELAN8-4K-WH Warm 500 ELAN8-3K-WH

Watt: 10

IP rating: 65

Size: 57 x 69 Ø

Colour Lumens

White

Neutral 580 ELAN10-4K-WH Warm 560 ELAN10-3K-WH

CODE

Chrome

Neutral 580 ELAN10-4K-CH

Chrome

Neutral 530

Warm 500 ELAN8-3K-CH

Warm 560 ELAN10-3K-CH

Brushed Nickel

Neutral

Brushed Nickel

Neutral

Warm 500 ELAN8-3K-BN

Warm 560 ELAN10-3K-BN

60

530

ELAN8-4K-CH

Volt: 240 Finish

ELAN8-4K-BN

580

ELAN10-4K-BN

61

Get the look you need Most of our ceiling lighting has interchangeable bezels or rings.

This gives you great flexibility in finish and even shape.

TILT (8-WATT) Volt: 240

Watt: 8

TILT (10-WATT) IP rating: 20

Size: 56 x 82 Ø

Finish

Colour Lumens

CODE

White

Neutral 530 ELAN8T-4K-WH

Volt: 240

Watt: 10

BAFFLED (10-WATT) IP rating: 20

Size: 57 x 79 Ø

Volt: 240

Watt: 10

IP rating: 44

Size: 76 x 71 Ø

Finish

Colour Lumens

CODE

Finish

Colour Lumens

Neutral 580 ELAN10T-4K-WH Warm 560 ELAN10T-3K-WH

White

Neutral 530 ELAN10-BF-4K-WH Warm 510 ELAN10-BF-3K-WH

CODE

Warm 500 ELAN8T-3K-WH

White

Chrome

Neutral 530 ELAN8T-4K-CH

Chrome

Neutral 580 ELAN10T-4K-CH

Brushed Nickel

Neutral

Warm 500 ELAN8T-3K-CH

Warm 560 ELAN10T-3K-CH

Warm 510 ELAN10-BF-3K-BN

Brushed Nickel

Neutral

Brushed Nickel

Neutral

Warm 500 ELAN8T-3K-BN

Warm 560 ELAN10T-3K-BN

62

530

ELAN8T-4K-BN

580

ELAN10T-4K-BN

530

ELAN10-BF-4K-BN

Easy colour temperature change

CHANGEABLE WHITE Volt: 240 Finish

Watt: 7

IP rating: 65 Colour Lumens

White/Brushed 2700-6500 650-750 Nickel

SMART CONTROL - WIZ Size: 85 x 64 CODE QUARTZ-4CT

Volt: 240

Watt: 10

Colour

IP rating: 65

Size: 85 x 64

Lumens

CODE

2700-6500 650-750

ESPRIT-WIZ

Bezel White

ESPRIT-WIZ -WH

Chrome

ESPRIT-WIZ -CH

Brushed Nickel

ESPRIT-WIZ -BN

You can change the colour temperature of both of these downlights. The Changeable White uses a switch on the back of the device and the Smart Control downlight uses the Wiz platform to wirelessly connect to it. This means you can change the colour temperature over WiFi through an app or smart speaker system, no matter if it is one solitary downlight or a whole ceiling of lights.

63

64

Pendant lighting 66. Contemporary pendants 70. Statement pendants 71. Glass pendants 72. Vintage pendants 74. Lamps for pendants

65

Contemporary pendants

a)

a) Turin Code: TURIN-BS Black sandstone cement effect Includes: 6W LED Width/Diameter: 4cm Drop: 170cm 66

b)

b) Como Code: COMO-BS Black sandstone cement effect Requires: E27 max 25W Width/Diameter: 16cm Drop: 190cm

c)

c) Como Code: COMO-WS White sandstone cement effect Requires: E27 max 25W Width/Diameter: 16cm Drop: 190cm

e)

d)

d) Jimmy Code: PL1R301210026 Black metal body, gold inner Requires: E27 max 60W Width/Diameter: 31cm Drop: 130cm

f)

e) Jimmy Code: PL1R301210876 Grey metal body, silver inner Requires: E27 max 60W Width/Diameter: 31cm Drop: 130cm

f) Marley Code: PL13124001016 White single pendant Requires: GU10 max 35W Width/Diameter: 6cm Drop: 150cm

g)

g) Marley Code: PL13124001326 Matt black single pendant Requires: GU10 max 35W Width/Diameter: 6cm Drop: 150cm 67

Contemporary pendants

i)

j)

h)

h) Baroness Code: PL13089002316 Matt white metal and acrylic Requires: E14 max 15W x 2 req Width/Diameter: 25cm Drop: 150cm 68

i) Baroness Code: PL13089002426 Anthracite metal and acrylic Requires: E14 max 15W x 2 req Width/Diameter: 25cm Drop: 150cm

j) Kingston Code: PL13153901066 Glass and chrome Requires: E14 max 40W Width/Diameter: 20cm Drop: 150cm

k) Midas Code: PL13016001066 Smoked glass and chrome Requires: E27 max 60W Width/Diameter: 30cm Drop: 150cm l) Midas Code: PL13016901066 Smoked glass and chrome Requires: E27 max 60W Width/Diameter: 45cm Drop: 150cm

k)

l)

m)

m) Pure Code: PL13020003426 Anthracite metal and smoked glass Requires: E14 max 28W x 2 req Width/Diameter: 40cm Drop: 150cm 69

Statement pendants

a)

b)

a) Course Code: PL1R320511076 Brushed nickel and acrylic Requires: 27W LED included Width/Diameter: 60cm Drop: 150cm 70

b) Carrera Code: PL13250101326 Matt black metal Requires: 38W LED Width/Diameter: 55cm Drop: 150cm

A range of stunning glass designs perfect for the contemporary home

Glass pendants

a)

c)

b)

a) Prague Antique bronze finish hanging set with twisted black cord Requires: E27 max 60w Drop: 200cm Budapest (not shown) As Prague with Pewter finish

d)

b) Calais Code: PL13048001426 Smoked glass body Requires: E27 max 60W Width/Diameter: 20cm Drop: 130cm

d) Robin (4 light) Code: PL13106004326 Matt black metal with smoked glass. 4 light Requires: E27 max 28W x4 req Width/Diameter: 80cm Drop: 150cm

c) Dover Code: PL13049001426 Smoked glass body Requires: E27 max 60W Width/Diameter: 40cm Drop: 130cm

Robin (1 light) Code: PL13106001326 Matt black metal with smoked glass. 1 light Requires: E27 max 28W req Width/Diameter: 10cm Drop: 150cm 71

Vintage pendants

b)

c)

a)

a) Cord Code: PL13101005616 Antique grey five cord set Requires: E27 max 60W x 5 Width/Diameter: 180cm Drop: 150cm 72

Cord (not shown) Code: PL13101005626 Antique copper five cord set Requires: E27 max 60W x 5 Width/Diameter: 180cm Drop: 150cm

b) Cord Code: PL13101001616 Antique grey single pendant Requires: E27 max 60W x 1 Width/Diameter: 12cm Drop: 150cm

c) Cord Code: PL13101001626 Antique copper single pendant Requires: E27 max 60W x 1 Width/Diameter: 31cm Drop: 150cm

Inspirational heritage designs with a contemporary twist

d)

e)

d) Gotham Code: PL13070006886 Vintage gunmetal effect Requires: E27 max 60W x 6 Width/Length: 46.3cm x 103cm Drop: 150cm e) Tanja Code: PL13007001026 Black and copper Requires: E27 max 60W Width/Diameter: 39cm Drop: 150cm 73

Lamps for pendants

a)

b)

c)

i)

d)

j)

74

e)

f)

g)

h)

k)

l)

m)

i)

Don’t forget your bulbs, here’s a range of LED lamps suitable for the pendant collection

a) Code: VIN-G95-ES-D Dimmable vintage globe G95 LED filament lamp Wattage: 2 Lumens: 170 Cap type: ES

d) Code: PL19024796 Bronze vintage LED diamond shape Wattage: 4 Lumens: 320 Cap type: E27

h) Code: PL19014796 Bronze vintage LED arrow shape Wattage: 4 Lumens: 320 Cap type: E27

k) Code: PL19876606 Dimmable GLS-LED Warm white Wattage: 6 Lumens: 600 Cap type: E27

b) Code: VIN-ST64-ES-D Dimmable vintage ST64 LED filament lamp Wattage: 2 Lumens: 170 Cap type: ES

e) Code: PL19024546 Silver vintage LED diamond shape Wattage: 4 Lumens: 140 Cap type: E27

i) Code: PL19014546 Silver vintage LED arrow shape Wattage: 4 Lumens: 140 Cap type: E27

l) Code: PL19894006 Candle LED - Warm white Wattage: 4 Lumens: 400 Cap type: E14

c) Code: VIN-T45-ES-D Dimmable vintage tubular T45 LED filament lamp Wattage: 2 Lumens: 170 Cap type: ES

f) Code: PL19044796 Bronze vintage LED faceted shape Wattage: 4 Lumens: 320 Cap type: E27

j) Code: PL1988564 Silver LED G95 shape Wattage: 4 Lumens: 140 Cap type: E27

m) Code: GLS10-WW-ES Warm white Code: GLS10-D-WW-ES Dimmable lamp Wattage: 10 Lumens: 806 Cap type: ES

g) Code: PL19044546 Silver vintage LED faceted shape Wattage: 4 Lumens: 140 Cap type: E27

75

76

Bathroom lighting 78. Bathroom cabinet lighting 80. Ceiling floor and wall lighting

77

Bathroom cabinet lighting

CORAL Volt: 12

Watt: 3

Finish

Temperature Lumens

Size: 160 x 40 x 5 IP rating

CODE

Chrome Warm 300 44

CORAL

NARA Volt: 12 Temperature

Finish: Stainless Steel Watt

Lumens

Size: 8.5 x 50 Ø IP rating

CODE

Neutral 1 170 67 NARAFL-4K Warm 1 160 67 NARAFL-3K

78

Ingress Protection (IP Rating) It is important to ensure that all bathroom lighting is well protected from water, either directly or in the atmosphere.

The IP rating scheme is a standard that rates a light's suitability for use in wet conditions. The specific rating depends on the proximity to water sources. All of our bathroom lighting has a minimum rating of IP44 with some downlights rated IP65, ideal for use in showers.

79

Ceiling floor and wall lighting

80

KITTS Volt: 240 Size

BUBBLES - SINGLE IP rating: 44

Finish: Chrome

Kelvin Lumens Watt

CODE

90 x 85 Ø 3000 280 3.6 282710106 160 x 85 Ø

3000

2 x 180

2 x 2.8

Watt: 15

Size

Kelvin Lumens

260 x 30

3000

1350

Temperature

Size: 190 x 120 x 70 Ø

Lumens

IP rating

CODE

Volt: 240

Watt: 2 x 3.2

Size: 300 x 120 x 70 Ø

Finish

Kelvin

Lumens

IP rating

Chrome 3000 300 44 282410106

Chrome

3000

2 x 300

44

APART

MATTIMO

Volt: 240

CODE

Size

Kelvin Lumens

656411506

350 x 100

3000

CODE 282410206

Watt: 18 1600

IR rating: 44

Volt: 240

CODE

Size

Kelvin Lumens

400 x 55 x 85

3000

659411806

Watt: 4.3

IR rating: 44 450

CODE 283270106

ELISE2 Finish: Stainless Steel Watt

Lumens

Size: 30 x 30 Ø IP rating

CODE

3000K 0.6 40 67 GR-JENA 4000K

Kelvin

IR rating: 44

JENA Volt: 12

Watt: 1 x 3.2

Finish

282710206

CESAR Volt: 240

Volt: 240

BUBBLES - DOUBLE

0.6

50

Volt: 12

Finish: Stainless Steel Lumens

Size: 20 x 20 Ø

Kelvin

Watt

3000

0.5 35 68 GR-ELISE2

IP rating

CODE

67 GR-JENA-4K

81

82

Other lighting &Â accessories 85. Other lighting 86. Powerports and chargers

83

84

Other lighting

Volt: 240 Size 450 x 205 x 50

SHINE - GLASS SHELF LIGHT

LED SLIM SHELF

MAJOR SHELF Finish: Aluminium

Temperature

Watt

CODE

Cool

5.8

LSHELF45-LED

Volt: 240 Size

Finish: Aluminium

Temperature

Watt

CODE

450 x 230 x 44

Warm

9.7

LEDSLIM450-3K

600 x 205 x 50

Cool

8

LSHELF60-LED

Neutral 9.7 LEDSLIM450-4K

900 x 205 x 50

Cool

12

LSHELF90-LED

600 x 230 x 44

Warm

Neutral 13.1 LEDSLIM600-4K

13.1

900 x 230 x 44

Warm

Neutral 19.5 LEDSLIM900-4K

19.5

MIA- RECESSED WALL/STAIR LIGHT Volt: 240

Temperature

CODE

Finish

Watt

CODE

35 x 38 x 30

Cool

1.5

SHINE-CW

Warm 1.5

SHINE-WW

Size: 75 x 75 x 48

Temperature Watt

CODE

Black

Warm

HARDY-BK

Brushed Nickel

Chrome

Warm

HARDY-CH

Warm 4

MIA-BN-3K

Chrome

Neutral 4

MIA-CH-4K

Warm 4

MIA-CH-3K

Neutral

Finish: Aluminium

Temperature

LEDSLIM900-3K

Volt: 12 Finish

Size

LEDSLIM600-3K

TOUCH BEDHEAD WITH USB CHARGER Watt: 10

Volt: 12

4

MIA-BN-4K

85

Powerports and chargers

POWERPORT

MOTORISED POWERPORT QI CHARGER

MOTORISED POWERPORT

Volt: 240

Volt: 240

Volt: 240

Max Watt: 3250

Size

Finish

CODE

352 x 115

Black

POW-2B

Satin Silver

POW-2S

Stainless Steel

POW-3SS

410 x 115

Stainless Steel

POW-3SS-BT

SURFACE USB CHARGER Volt: 12

720 x 112

Finish

CODE

Stainless Steel

POW-6M

RECESSED USB CHARGER Max Watt: 5

Size

Finish

CODE

50 x 30 x 14

Grey

WUSB-S

86

Size

Watt: 3250

Volt: 12

Max Watt: 5

Size

Finish

CODE

37 x 25

Grey

WUSB-R

Size 720 x 112

Watt: 3250

Finish

CODE

Stainless Steel

POW-5M

87

Design by Schuller

88

Sensors, drivers &Â controllers

89

PIR

ON/OFF

DOOR SENSORS IR

Sensors

Finish

Max Watt

63 x 14

White

15/30

Black 15/30

CODE

Finish

Max Watt

IRDS-LED-TOP

63 x 16

Satin Silver

24/48

S-IRDS-LED-TOP

IRDSBK-LED

63 x 16

Satin Silver

24/48

S-PIR-LED-TOP

Finish

Max Watt

Satin Silver

24/48

CODE DSIR-TOP

Size 23 x 18 x 8

Size

CODE

MINI DOOR SENSOR (SINGLE) RECESSED

Volt: 12/24

Volt: 12/24 23 x 18 x 8

Volt: 12/24

Size

DOOR SENSOR (TWIN)

DOOR SENSOR (SINGLE) Size

SENSORS- RECESSED/SURFACE

Volt: 12/24

Volt: 240 Finish

Max Watt

Satin Silver

24/48

CODE DSIR-DUO-TOP

Size

Finish

Max Watt

13 x 10

Black

250

MINI DOOR SENSOR (TWIN) RECESSED

MOTION SENSORS RECESSED

WIRELESS PIR SENSOR KIT

Volt: 240

Volt: 240

Volt: 12/24

Size

Finish

Max Watt

13 x 10

Black

250

90

CODE S-MINI-DS-DUO

Size

Finish

Max Watt

13 x 10

Black

250

CODE S-MINI-MS

Size

Finish

Max Watt

51 x 51 x 10

Black

60/120

CODE S-MINI-DS

CODE PIR-RFSEN

Drivers

6W DRIVER

12W DRIVER

Max Watt: 6

15W DRIVER

Finish: White

Size

Volt

CODE

68 x 35 x 20

12

DRV12-6W

24

DRV24-6W

30W DRIVER

Max Watt: 15

Finish: White

Size

Volt

CODE

121 x 46 x 20

12

DRV12-15W

10W DIMMABLE DRIVER Max Watt:10 Size

Volt

CODE

158 x 46 x 18

12

DRV12D-10W

Finish: White

Size

Volt

CODE

94 x 45 x 27

12

DRV12-12W

60W DRIVER

Max Watt: 30

Finish: White

Size

Volt

CODE

140 x 45 x 29

12

DRV12-30W

24 DRV24-30W

30W DIMMABLE DRIVER Finish: White

Max Watt: 12

Max Watt: 30

Max Watt: 60

Finish: White

Size

Volt

CODE

180 x 60 x 32

12

DRV12-60W

24 DRV24-60W

50W DIMMABLE DRIVER Finish: White

Size

Volt

CODE

158 x 46 x 18

12

DRV12D-30W

Max Watt: 50

Finish: White

Size

Volt

CODE

174 x 61 x 24

12

DRV12D-50W

91

Dimmers & controllers

SINGLE COLOUR FOUR ZONE Max Watt: 144/288

Max Watt: 144/288

Volt

WHITE CHANGEABLE 4 ZONE

Receiver

Volt 12/24

CODE RF-Z2C-REC

CODE

12/24 RF-Z1C-REC

12/24 RF-Z4C-REM

RECESSED ON/OFF DIMMER

RECESSED OR SURFACE ON/OFF DIMMER

Size 22 x 18

Max Watt: 24/48 CODE

Size

Satin Silver

RECTD

17

PIR-SENTIM

Volt

Volt

92

250

CODE LLSENS

240

Volt: 12/24

Finish

LLSENS IR ON/OFF GESTURE CONTROL Max Watt

CODE

12/24 RF-Z4C-REC

Remote RF-Z1C-REM

240

Volt

12/24 RF-Z1C-REM

Volt: 12/24

Max Watt: 144/288

RGB/RGBW FOUR ZONE

Max Watt 250

CODE PIRSENTIM

Max Watt: 24/48

Finish

CODE

Satin Silver

SRSEN

Smart Control

WIZ RETRO Max Watt: 500

OMNI Volt: 240

CODE

Receiver

WIZ-REC

Max Watt: 144/288

Volt

Smart controller

12

CODE

OMNI-REC-TOP-PS

93

Terms and conditions Leyton Lighting has a policy of continuous product development and whilst every effort has been made to provide accurate and up-to-date information within this brochure, products supplied may vary in detail to those illustrated and described.

LED – please note that colour shift may occur where LEDs are placed within close proximity to each other and that colour temperature can vary between batches and manufacturers.

We would like to thank Schuller, Treyone, JS Geddes, Now Kitchens and Dimension DMI for the use of their photography in the making of this brochure.

94

95

UNIT 5, Hemmells Park, Hemmells, Laindon, Essex, SS15 6GF

96

T: +44 (0)1268 544488

E: info leytonkbb.co.uk

F: +44 (0)1268 544448

W: leytonkbb.co.uk