Moisture analyser KERN DBS
04
Modern moisture analyser with 10 memories and graphic display STANDARD
STANDARD
KERN DBS 60-3 Readout [d] 0,001 g / 0,01 % Weighing range [Max] 60 g Reproducibility, weight 0,15 % of sample 2 g Reproducibility, weight 0,02 % of sample 10 g Display after drying (Display can be switched over at any time) Moisture [%] = Weight loss (WL) from SW (startweight) 0 - 100 % Dry mass [%] = Residual weight (RW) from SW ATRO [%] [(SG-RG) : RG] · 100% ATRO [%] (SG : RG) · 100% Weight loss [g] (WL) Temperature range Drying modes
Switch off criteria Recall of measurement Overall dimensions WxDxH Net weight Price €, excl. of VAT, ex works
100 - 0 % 100 - 999 % 0 - 999 % Absolute value in [g] 50 °C - 200 °C in steps up to 1 °C • Standard drying • Drying in levels • Gentle drying • Pre-heat level, can be switched on • When the set time has expired 1 min - 4 h • When the weight loss per unit of time falls below the target value (30 sec) Interval can be set from 1 sec - 10 min (Only when used with printer KERN YKB-01 or PC) 202x336x157 mm approx. 4,2 kg 990,-
Features Features • Halogen quartz glass heater 400 W • H alogen quartz glass heater 400 W LCD display, Backlit • B acklit LCD 14 display, digit height mm Previous height drying 14 mmtime • digit Current temperature drying time • Previous Unit for displaying temperature the results • Current Current for displaying moisture content the results in % • Unit Currentmode/Status moisture content display in %drying • Drying Drying mode/Status display • Observation window over thedrying sample, • useful window over the sample, Observation during initial adjustment during initialfor adjustment • Iuseful nternal memory automatic sequence • of Internal memory for automatic sequence 10 drying programs and 100 drying of 10 dryingcarried programs processes out and 100 drying carried out remains on • Tprocesses measured he last value • Tthe value measured remains he last display until it is replaced by aonnew the display until it is replaced by a new measurement measurement • S ample description for up to 99 samples, • 2 Sample for up to 99 digits, description freely programmable, andsamples, is printed 2 digits, freely programmable, and is printed in the measuring protocol inate theand measuring protocol • D time display as standard D0ate and time display as standard • 1 plates included sample 1able 0 sample plates included • T of applications: There are • many Table practical of applications: There areoperating examples in the many practical examples in the operating instructions instructions Options Options • Sample plates aluminium, Ø 92 mm. • Unit Sample plates aluminium, Ø 92 mm. of 80 pieces, KERN MLB-A01, € 45,Unit of 80 pieces, KERN MLB-A01 • R ound fiberglass filter e.g. for samples • that Round fiberglass filterencrusted. e.g. for samples splash or become Unit of thatpieces, splashKERN or become encrusted. 80 RH-A02, € 65,- Unit of set consists pieces, KERN calibration RH-A02 • 80Temperature calibration set device, consists measuring sensor and display • of Temperature of measuring sensor and display device, KERN DBS-A01, € 290,KERN DBS-A01 (interface cable, driver and • U SB interface • software USB interface (interface cable, driver and Balance Connection included), software Balance€ Connection included), KERN DBS-A02, 290,KERN • M atrixDBS-A02 needle printer, • KERN Matrix911-013, needle printer, € 330,- KERN 911-013 YKB-01N € 240,• Thermal printer, KERN YKB-01N,
For more information, please www.kern-sohn.com/en/DBS Order hotline +49-(0)7433-9933-0 KERN Order &Hotline: SOHN GmbH Go to•back Ziegelei page 1visit •of72336 catalogue Balingen • Germany • Phone· + 49-7433-9933-0 • Fax + 49-7433-9933-149 • www.kern-sohn.com • info@kern-sohn.com Moisture analysers
45