ePerformance for the Generation_e
Sennfeld, 2014-07-19
SDURO-Launch
ePerformance for the Generation_e
‌
ePerformance for the Generation_e
‌
Powersystem
ePerformance for the Generation_e
PW (Power) Drive Unit
ePerformance for the Generation_e
1. Yamaha PW Drive Unit Technical data: assit power control method:
middlemotor, direct drive DC, brushless triple sensorik - torque - cadence/RPM - speed
Axle: square type – single & double chainring
ISIS – e:i shock models weight/volume:
3,5 kg / 190cm³
Continuous poer:
250 Watt
Speed max:
25km/h
Continuous torque / RPM:
70 NM / 80RPM
Max. torque Peak:
80 NM
Coaster brake function:
no
Drive unit variants:
2
warranty: 24 months
ePerformance for the Generation_e
1. Yamaha PW Drive Unit Motor response Motor torque
Yamaha Drive Unit others
time
ePerformance for the Generation_e
1. Yamaha PW Drive Unit Drehmoment
Zero Cadence
Torque
Drive unite torque Cadence / RPM
starts steps Uphill
Kurbelumdrehung / min 0
60
120
180
Cadence / min
Already strong motorsupport by low-level pedalcadence less than 60 RPM!
1. Yamaha PW Drive Unit 1.1 gear transmission ratio: model
tyre
Xduro MTB single/10speed
57-584
Sduro MTB 27,5" double / 20speed
Sduro MTB 27,5" single / 10sped
sprocket
Expansion in meter / crank rotation
16T>40T
11T
8,08 meter
16T>40T
36T
2,45 meter
44T
11T
8,92 meter
32T
36T
1,98 meter
38T
11T
7,60 meter
38T
36T
2,32 meter
48T
11T
9,73 meter
36T
36T
2,23 meter
44T
11T
9,32 meter
32T
36T
2,07 meter
38T
11T
8,05 meter
38T
36T
2,46 meter
60-584
57-584
Sduro TRK/Cross 28" double / 20speed
40-622
Sduro MTB 29" double / 20speed
57-622
Sduro MTB 29" single / 10speed
Front chainring
57-622
Gear transmission 330 % 450 % 328 % 440 % 450 % 327 %
ePerformance for the Generation_e
1. Yamaha PW Drive Unit 1.1 gear ratio/expansion in meter per pedal rotation. tyre: 57-584 / 27,5“
2 chainrings rear
(36)
(29)
(24)
(20)
(18)
(16)
(14)
(13)
(12)
(11)
front 1 (32)
1,96 2,43 2,93 3,52 3,91 4,4
2 (44)
2,69 3,34 4,03 4,84 5,38 6,05 6,91 7,45 8,07 8,80 That matches a gear ratio of 450%
5,03 5,42 5,87 6,4
ePerformance for the Generation_e
Downtube battery
ePerformance for the Generation_e
2. Yamaha Akku Technical data: batterytype:
Lithium-Ionen 40cells
Position:
downtube
size (L-H-W):
372x80x100mm
weight:
2,9kg
voltage:
36V
ampere:
11A
watt-hours:
400Wh
Charging:
at Pedelec & external
Battery removal:
at the side
lockable:
Yes
Displaying batterCapacity with LED: Yes Battery variants:
1
batterylock
charging
warranty: 24 months by 700 full charging cycles / 50% capacity
ePerformance for the Generation_e
2. Yamaha Akku battery mounting
Klick
1. Battery insert angular
2. Pushing the battery in direction to the lock
3. Battery snaping with a „Klick“
„Shoc-Absorber“ 4 x bumb rubber in the lower batterymount absorbing vibrations and shocks
flexible pins 4 x bumb rubber
ePerformance for the Generation_e
technical data battery: Storage temperatur: ideal:
0°C to 40°C 10°C to 20°C
ideal storage capacity: 50%
Charging temperatur: 0°C to 45°C ideal: 15°C to 25°C Using temperatur
: -20°C to 60°C
2. Yamaha battery 2.1 battery display function - display capacity (LED´s) during charging
1-24%
25-49%
49-74%
75-99%
- checking restcapacity of battery (LED´s flashing for about 4sec.)
100% - Voll
ePerformance for the Generation_e
2. Yamaha battery 2.1 battery display function - checking the whole battery charging cycles: pushing 20sec the button „1“ - checking the absolute battery capacity: pushing 30sec the button „1“
2.2 battery diagnostic modes: Call / identfy (LED are flashing in different versions) - temperatur protection - overload protection - error indications / error codes - deep discharging protection
ePerformance for the Generation_e
LCD Display und Remote
ePerformance for the Generation_e
3.1 Yamaha Remote mounted at the left side of the handlebar
Power switch ON/OFF (in front) System is switching automaticly Off after 5min disuse!
Light switch (no function for models without driving lights!)
Assist mode switch Up and down - for modes: ECO – STD – HIGH and OFF
Function select switch
Pushing select switch (walking assist)
Warranty: 24 months!
ePerformance for the Generation_e
3.2 Yamaha LCD Display Assembling / positioning
1. Insert the battery into the display
2. Display removing / clamping
3. Display angle positioning
ePerformance for the Generation_e
3.2 Yamaha LCD Display Technical data: Name of display
: LCD-Display, removeable own power (CR2032) for clock
mounting:
middle of handlebar display angle adjustable
size (L-H-W):
70x13x51mm
weight:
60 gramm
permanent Display:
- Assist mode indicator ECO– STD - HIGH - OFF - speedometer (km/h-Mph) - battery capacity indicator - assist power meter - clock - thermometer (°C) - function display
Warranty: 24 months
ePerformance for the Generation_e
3.2 Yamaha LCD Display Function display: - average bicycle speed - trip meter - maximum bicycle speed - odometer - remaining assist distance - battery capacity in % - cadence
3.2.1 push the button „S“ for Function Display
3.2.2 setting back of „AVE“, „Max“, trip meter > push the button „S“ for 2sec !
ePerformance for the Generation_e
3.2 Yamaha LCD Display 3.2.3 display backlight is permanetly switched on!
3.2.4 Push the light switch for models with lighting. Electric power supply from Yamaha-battery!
3.2.4 Others to adjust - clock - km or miles System must be switched off. Keep pushing button function display (1) and after the Power switch button (2)
2
1
ePerformance for the Generation_e
3.2 Yamaha LCD Display – diagnostic mode The Yamaha System contains a diagnostic mode! In the diagnostic mode it`s possible to identify different errorcodes and how to correct. No tool necessary! 3.2.5 communication error In the display the „Mode segment“ is flashing together with the „battery capacity segment“. The segment „Er“ is shown permanent!
3.2.6 Disruption of the drive unit In the display the „Mode segment“ and the „battery capacity segment“ are flashing rotationa.l The segment „Er“ is shown permanent!
3.2.7 Disruption of the speedsensor The „Mode segment“ is flashing slowly. km/h shows „----“ > normaly the spoke magnet is not in line with the sensor!
flashing rotational
ePerformance for the Generation_e
charger speed sensor
ePerformance for the Generation_e
4. Yamaha charger & Speedsensor 4.1 Yamaha charger technical data weight: dimensions (LxHxB): temperatur: charging rate: full charging time: charging time 80%: max. voltage:
4.2 speedsenosr - mounted at the reawheel with spoke magnet - magnet-sensor distance: 5 – 10mm
Warranty: 24 months!
970 gramm 20x6x10cm 0°C bis 40°C 3,6A 3,5 h ca. 2,5h 42V
Splash water protected: IPX 4
ePerformance for the Generation_e
5. Ranges and support in detail 5.1 ranges
HIGH
70 km
STD
85 km
ECO
130 km
Ranges are tested by ourself on the official „Extra Energy“ testing track!
5.2 additinal support in percent (%)
ECO
STD
HIGH
100%
190%
280%
*
* 20NM pedaltorque, ideal cadence (80 RPM) and optimized speed between 8km/h – 24km/h
ePerformance for the Generation_e
Additional Sduro and Winora „Y-models“ facts: - Double chainring compatibility > big gear transmission ratio - same frame platform like XDURO > no compromises in quality - framesize up to 35cm > battery removal from the side - 29“ Fully > because of shorter wheelbase - e:i shock integration - driving lights easy to upgrade - Entry level model: 1.999,-- EUR (retail price in Germany)
ePerformance for the Generation_e
Serviceconcept
ePerformance for the Generation_e
6. Service concept 6.1 serviceconcept - structure
endconsumer has a problem with its Pedelec
dealer 1. claiming 2.repairing
3. No GA invoice 4.Located Errorcode with assistance of the diagnostic mode
Winora-Service 7.no GA invoice
6. - Checking warranty claim! - Diagnostics and/or 5. claiming repairing! with warranty sheet - Decision by Winora Service 8. warranty center
Credit note
ePerformance for the Generation_e
6. Service concept 6.2 original instruction
Original instruction for the endconsumer !
ePerformance for the Generation_e
Parts of the original instruction!
ePerformance for the Generation_e
6. Serviceconcept 6.3 Serviceconcept – service instruction
Serviceinstructions for the Dealer (about 75 pages in different languages!
ePerformance for the Generation_e
Parts of the dealer service instruction!
ePerformance for the Generation_e
6. Service concept 6.4 spare part catalogue in different languages available!
ePerformance for the Generation_e
6.
service concept
6.4
spare part catalogue
6.4.1 Idenification of the Yamaha spareparts with the help of the explosiondrawings and 2D-drawings. Yamaha parts have numbers!
Battery mount
ePerformance for the Generation_e
6.
service concept
6.4
spart part catalogue
6.4.2 allocation of the Yamaha spareparts numbers (REF.NO./ PART No.) with BikeParts itemnumbers, description and price!
Yamaha spareparts catalogue with - explosiondrawings - allocation of the itemnumbers - sparepart quotations and BikeParts numbers
ePerformance for the Generation_e
6.
sercice concept
6.5
dealer training / information flow - Winora service guys will be trained directly by Yamaha engineers - all information online available > Haibike dealer zone – download area - whole servicing and sparepartorders will be handled by our Winora eBike Service - Roadshow early spring 2015 – Workshop!
ePerformance for the Generation_e
Thank´s a lot for your attention!