fox512_manual_v2_en-1

FOX512 MOVING LIGHT CONTROLLER

User’s Manual

Net.DO FOSHAN NETDO LIGHTING CONTROL EQUIPMENT CO.,LTD

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Contents 1. Summary...................................................................................................................... 3 1.1 Functions ......................................................................................................... 3 1.2 Specifications (VER: 2.0).............................................................................. 3 2. Installation ................................................................................................................... 4 2.1 Packing List ..................................................................................................... 4 2.2 Safety Caution ................................................................................................. 4 2.3 Interface and Connection of Controller ......................................................... 4 2.3.1 Backboard Plot .......................................................................................... 4 2.3.2 Audio Signal Source................................................................................... 4 2.3.3 DMX512 Signal Interface & Connection of Fixture..................................... 5 2.3.4 Power Interface.......................................................................................... 5 2.3.5 USB Interface ............................................................................................ 5 3. Operation Guide .......................................................................................................... 6 3.1 Panel plot ......................................................................................................... 6 3.2 Master Faders.................................................................................................. 7 3.3 PLAYBACK Area .............................................................................................. 7 3.4 Function Key (Fixture page 0~2, GROUP, PRESET, SCENE A/B .............. 7 3.5 SHAPE Control Area ....................................................................................... 8 3.6 Fixture Attribute Key ....................................................................................... 8 3.7 LCD Display, A/B Wheel, Edit Area ................................................................ 9 4. Quick Start ..................................................................................................................11 4.1 Examples.........................................................................................................11 5. Setting Menu.............................................................................................................. 12 5.1 Menu Operation ............................................................................................. 12 5.2 Library Setting............................................................................................... 12 5.3 Fixture Setting............................................................................................... 13 5.3.1 Fixture Patched........................................................................................ 13 5.3.2 Invert attribute value ................................................................................ 15 5.4

Data File ......................................................................................................... 15 5.4.1 Save File.................................................................................................. 15 5.4.2 Read File ................................................................................................. 15 5.4.3 Delete File................................................................................................ 15

5.5

Other Setting ................................................................................................. 16 5.5.1 Data Initialized ......................................................................................... 16

6. Manual-Run Fixture................................................................................................... 17 6.1 Manually-Run Fixture .................................................................................... 17 6.2 Clear Manual-Run Fixture ............................................................................. 18 6.3 FIND function................................................................................................. 18 6.4 LOCATE function........................................................................................... 18 6.5 GROUP function ............................................................................................ 18 6.6 Parity selecting and one by one control of fixtures ................................... 18 6.6.1 Parity selecting of fixtures ........................................................................ 19 6.6.2 One by one control of fixtures .................................................................. 19 6.7

FAN function .................................................................................................. 19

FOX512 Moving Light Controller.

PAGE: 1

Net.DO 6.8 6.9

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

MODIFY function ........................................................................................... 19 Reference Fixture .......................................................................................... 19 6.9.1 Set “Reference Fixture”............................................................................ 19

6.10 Attribute ALIGN function ............................................................................ 20 6.11 Lamp On / Lamp Off / Reset function......................................................... 20 7. PRESET...................................................................................................................... 21 7.1 Import PRESET.............................................................................................. 21 7.2 Call PRESET .................................................................................................. 21 7.3 Customize PRESET ....................................................................................... 21 7.3.1 Record PRESET ...................................................................................... 21 7.3.2 Delete PRESET ....................................................................................... 21 7.3.3 Copy PRESET ......................................................................................... 21 8. SHAPE........................................................................................................................ 22 8.1 Edit and call SHAPE ...................................................................................... 22 8.2 Stop SHAPE ................................................................................................... 23 8.3 Check shape of “Reference Fixture” ........................................................... 23 8.4 Skill in using shape ....................................................................................... 23 9. Program ..................................................................................................................... 24 9.1 HTP and LTP channel .................................................................................... 24 9.2 Empty LTP channel ....................................................................................... 24 9.3 Clear LTP remaining value in Playback ....................................................... 24 9.4 Record Program ............................................................................................ 25 9.4.1 “Single-Step Program” and “Multi-Step Program” .................................... 25 9.4.2 Fast record “Single-Step Program” .......................................................... 25 9.5

Edit Program.................................................................................................. 25 9.5.1 Copy Step ................................................................................................ 26

9.6 9.7 9.8

Delete Program.............................................................................................. 26 Copy Program................................................................................................ 26 PLAYBACK of Program................................................................................. 26 9.8.1 Turn Pages of Playback ........................................................................... 26 9.8.2 Playback Key ........................................................................................... 27 9.8.3 Use “Playback Menu”............................................................................... 27 9.8.4 Connect “Multi-Step Program” ................................................................. 28 9.8.5 Control “Multi-Step Program” ................................................................... 28

9.9

Fader Time of Playback ................................................................................ 28 9.9.1 Edit Fader Time........................................................................................ 29

9.10 Fader Synchronization of Playback.............................................................. 29 10. SCENE...................................................................................................................... 30 11. Priority Levels of Different Operations.................................................................. 31 12. Software Upgrade.................................................................................................... 31 13. Data Protection........................................................................................................ 32

FOX512 Moving Light Controller.

PAGE: 2

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

1. Summary 1.1

Functions FOX series moving light controller, with microcomputer as core, in adoption of new technology, has more powerful and humanized functions. 

Up to 512 DMX channels, DMX512/1990 standard, photoelectric isolated signal output.



Up to 60 intelligent Fixtures or 60 Dimmer could be connected.



Up to 42 channels each Fixture, Fixture Library mode, “R20” Library compatible.



240 Playback programs in 30 pages.



40 Scenes can be directly used or mixed, can be used with Playback, by flash or latch.



SHAPE is provided to control such effects as circles, lines and dimmer effect. Etc.



Chase triggered mode selectable: Auto1, Auto2, Music Sync.



LCD display with backlight. 12V accessory operate light (OPTIONAL)



USB port is provided, USB disk can record the data of controller. Controller can be upgraded through the USB disk.

1.2

Specifications

(VER: 2.0)

FOX1024 DMX512 Total Channels

512

MAX Intelligent Fixtures

60

MAX Playback Programs

240

MAX Preset Focus

20

MAX Groups

20

Scene-snapshots

40

Shape-Generator

YES

LCD Display Screen Synchronous Trigger Mode Library Format USB Port Music Control Signal Input Power Supply Power Size

FOX512 Moving Light Controller.

YES (Chinese/English) Auto1, Auto2, Music R20 Format YES Line level input / MIC input Switch Power Supply, AC 100~240V, 50/60Hz 5W 482mm × 400mm × 90 mm

PAGE: 3

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

2. Installation 2.1

Packing List FOX512 moving light controller includes the items in the carton as follows: 

ONE FOX512 moving light controller TIPS: Model of product and software version could be checked on boot screen.



ONE power supply cable, ONE user’s manual.

Optional Parts: USB Disk;

2.2

2.3

Safety Caution 

The controller must be connected with the protective groundwire!



No liquid into the controller!



Please mind dust and moist!

Interface and Connection of Controller

2.3.1 Backboard Plot

DMX512 Output

Audio Input

Power Input

Power Switch

2.3.2 Audio Signal Source 

Audio signal can be taken from mixer controller, line level output of other audio equipments, or MIC input, Controller automatically extracts low-frequency component from music as music trigger synchronous signal for Multi-Step Program program.

 Audio Input MIC head

One 6.35 mm audio input socket locates on the rear Panel of controller, the accommodation of input level of audio signal covers -10dB ~ +10dB. When audio device is plugged in, source of sound is line level input, when nothing is plugged in, source of sound is MIC selection.

FOX512 Moving Light Controller.

PAGE: 4

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

2.3.3 DMX512 Signal Interface & Connection of Fixture There are 2 DMX512 interfaces which output the same content and use optically isolated circuit, they’re both 3-pin XLR, pin 1 is for signal ground, pin 2 is for negative, and pin 3 is for positive.

DMX512 cable is screened twist line. Each end of the cable

Pin number

Cable conductor

should be joined to XLR plug by user. Pin 1 of XLR plug is

1

Shield

connected to screen net. Two lines of twist line (distinguished by

2

Negative ( - )

different colors) are connected to pin 2 and pin 3 of the plug

3

Positive (+ )

respectively. Please do not confuse. The schematic diagram for connection is shown as follows:

2.3.4 Power Interface This controller adopts wide range switch power supply (AC100-240V/50-60Hz). Please confirm voltage is suitable to controller before connection. Power socket must be connected with protective groundwire to ensure safety.

2.3.5 USB Interface This controller provides a standard USB interface for data backup, renewal of library files and software upgrade.

FOX512 Moving Light Controller.

PAGE: 5

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

3. Operation Guide 3.1

Panel plot

FOX512 Moving Light Controller.

PAGE: 6

Net.DO 3.2

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Master Faders

Master faders of brightness (MASTER) There are 2 master faders in the console: Playback － Master brightness control of Playback area Grand

－ Master brightness control of all output

TIPS: When the keys under the Master Faders are pressed, their indicators will be bright, the value of the Master Faders will be locked at the highest value. Press again to unlock.

3.3 PLAYBACK Area

Playback Page Key Master Fader Playback Fader

Playback Select Key

Master Select Key

Playback Fader There are 8 playback faders and 30 pages, which totally can record 240 programs. Push the playback fader and the corresponding programmed contents will be output to the fixtures.

Playback Select Key (Playback key for short): There is one under each Playback Fader.

Playback Page Key (Up / down): Playback’s page up & down. LED screen shows the corresponding pages. (TIPS: holding page key can quick flip) GO/STOP

－To run or suspend the current connected Multi-Step Program;

 STEP 

－Change the running direction of current Multi-Step Program, or manual-run Multi-Step Program forwad or backward step by step.

TIME/ PB

－Used to Enter Playback Menu. In the menu, programs can be connected by Playback Key, and set the external speed (Auto1), mode of running, starting and ending.

3.4

Function Key (Fixture page 0~2, GROUP, PRESET, SCENE A/B）

FIXTURE

0--

1--

2--

Fixture Page Key:

Press Fixture Page Key, then the 1~20 Numeric Key will be used for fixture selection. There are 20 fixture numbers each page, totally 3 Page Keys. The fixture numbers correspond to: Page 0 (0_01~0_20), Page 1 (1_01~1_20)，Page 2 (2_01~2_20), totally 60 fixture numbers.

(TIPS: When an indicator of Fixture Page Key is bright, it means that page is selected; when the indicator flashes slowly, it means there are fixtures selected in that page.)

FOX512 Moving Light Controller.

PAGE: 7

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Function Key

Number Key

GROUP

Function Key

Press GROUP key, then the 1~20 Numeric Key will be used for group selection.

PRESET

Function Key

Press PRESET key, then the 1~20 Numeric Key will be used for preset selection.

SCENE

A

,

B

Scene-Snapshot Function Key

There are 2 Scene pages (A, B), totally 40 Scenes. 20 Scenes per page, selected by 1~20 Numeric Key 1~20 Numeric Key

3.5

Totally 20 Numeric Keys, they will have different functions under different status.



Under Fixture selection status, they are Fixture Numeric Key.



Under GROUP status, they are Group Numeric Key.



Under PRESET status, they are Preset Numeric Key.



Under SCENE status, they are Scene Numeric Key.

SHAPE Control Area

STOP

－ Suspend the current called SHAPE.

PLAY

－ Press once (indicator bright) to run the current called SHAPE. Press one more time (indicator flashes) to enter SHAPE display.

3.6

Fixture Attribute Key

Fixture Attribute Key ATTRIBUTE area contains 10 attribute keys, FOX512 Moving Light Controller.

P2

attribute page key,

MODIFY ,

FAN .

PAGE: 8

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Attributes --- such as Dimmer, Colour, Gobo etc. Attributes can be selected by Attribute Key, modified by A/B wheel.

The 10 Attribute Keys correspond to the attribute names above.

Press

P2

(indicator bright) to switch to Attribute Page 2, then the Attribute Keys will become

No.11~20 Attribute Keys. One Key controls 2 attributes, so the console can control totally 40 attributes.

FAN

－Used to spread the attribute value of selected fixtures to gain the gradual change effect of attribute value among fixtures.

MODIFY

3.7 

LCD Display, A/B Wheel, Edit Area LCD Display Control

BACK F1

－Relative change function of attributes.

: Used to return to previous layer menu.

F2

F3

F4

Soft Keys:

The control contents depend on the current menu page, different functions in different menu pages;    Cursor Key (shown as right) 1. Left/Right Key is used to select the items on left/right; 2. Up/Down Key is used to modify the numerical value of the selected items.

A/B Wheel: There are 2 wheels (A/B), the control contents depend on the items displayed in the menu.

If there is no corresponding display, the Wheel can modify the selected Menu Item.

A /B Wheel FOX512 Moving Light Controller.

Cursor Key PAGE: 9

Net.DO 

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Edit Area

PROGRAM

－Used to enter program menu to edit the relevant parameters.

SETUP

－Used to enter SETUP menu to set fixtures / libraries and manage files.

RECORD

－Used to record data.

COPY

－Used to copy data.

DELETE

－Used to delete data. *TIPS: While press and hold one of the three keys above, the indicators of Numeric Key will show whether there is contents in Playback / Group / Preset / Scene. When the indicator is bright, it means there is content in that key.



Fixture Edit

CLEAR

－Used to clear the selection and value of all manual-run fixtures.

LOCATE

－Used to locate and light up the selected fixtures (set value for all channels).

FIND

－Used to find the selected fixtures (will not set value nor keep value after quit)

ALIGN

－Used to change attributes of selected fixtures to be same as Reference Fixture.

Prev

Next

－Used to select single / odd / even fixtures among the selected fixtures

FOX512 Moving Light Controller.

PAGE: 10

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

4. Quick Start 4.1

Examples A simple demo is listed below for fast learning of the console’s operation. Take creating circle with 10

Martin intelligent fixtures as example (Model: MT2000PR). Procedure is as follows:

Load Library

Patch Fixture

Manual-Run Fixture

Record Program

Program Playback

1) Load Library: Copy library “MT2000PR.R20” to the root directory of U-disk and connect it with console Operation: SETUP  Library  Import, rotate the Wheel to select “MT2000PR.R20” and confirm.

2) Patch Fixture: Operation: SETUP  Fixture  FixPatch, then press 0-- key to enter Fixture Page 0, select No.1 fixture by Numeric Key 1; then set FixModel to “MT2000PR” and DmxAddr to “A1”. Copy the settings of No.1 fixture to No.2~10 fixtures. Operation as follows: (Press and hold COPY  Press Fixture Numeric Key 1  Press Fixture Numeric Key 2~10).

3) Manual-Run Fixture: 

Select No.1~10 fixtures;



Press LOCATE key to light up all the selected fixtures.



Press PLAY key to enter SHAPE menu  Press Edit..(Soft key)  Press  key to select on  Rotate A/B Wheel to set the models of shape(circle), then the fixtures will run circle.

4) Record Program: 

Press and hold RECORD  Press Playback Key 1

Then the record of a “one-step-program” is finished (in Playback Page 1, Key 1, Program No.1.01) 5) Press CLEAR to clear all the data of manual-run fixtures.

6) Program Playback: Push Playback Key 1 in Page 1, the recorded “one-step-program” will be output to the fixtures immediately.

*Above is just a simple demo for beginners to start learning the console, to understand the operation of advanced functions, reading this manual carefully would be necessary.

FOX512 Moving Light Controller.

PAGE: 11

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

5. Setting Menu 5.1

Menu Operation

Menu Item Master Faders’ value

A/B Wheel’s value

Soft Key

The menu is operated by Soft Keys, which is easy and fast.

There are four Soft Keys: F1 / F2 / F3 / F4, which correspond to the items in the right side of LCD screen, press a Soft Key to enter the corresponding sub-menu, press BACK to return to previous menu.

Press Main Menu key to return to site menu.

The Menu Item can be selected and modified by    Cursor Keys; The selected item is displayed with white background, the value can be modified by  Key or A/B Wheel, the modified data will be automatically saved after the operating menu is exited.

There are 2 Main Menus (PROGRAM / SETUP), this chapter will introduce the functions of SETUP, press SETUP (indicator bright) to enter settings menu, the menu tree of SETUP MENU is as follows:

SETUP

Fixture

Library

DataFile

Other...

(F1)

(F2)

(F3)

(F4)

5.2 Library Setting Path: SETUP  Library Library

Different fixtures have different channels and attributes, which require libraries to be identified by the console (1 library corresponds to 1 kind of fixture). Library: contains the information of channels and attributes. The attributes can be

NewModel

Modify

Delete

Import

controlled by attribute keys and A/B Wheel after the correct

(F1)

(F2)

(F3)

(F4)

library is patched to the fixture.

Library: There is a DVD-ROM in the carton, it contains the libraries of over 3 thousand fixtures, which can be imported to the console from U-disk. (Libraries can be custom by <NetDO Library Software> in PC)

FOX512 Moving Light Controller.

PAGE: 12

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Build library in the console: libraries can also be built in the console.

NewModel:



The name of new libraries has to be xxx user。 In the Library menu, press NewModel soft key to enter NewModel menu (As shown on the right.)

Firstly set the total channels according to the information provided by fixture factories; then set the attribute of each channel; finally set the type of running (LTP-inst / LTP-fade / HTP).

Total channels

Attribute

Channel

LTP-inst: the channel will run by LTP-instant.

Type of running

LTP-fade: the channel will run by LTP-fade (Including fade-in / fade-out of playback and fade effect between steps of programs) HTP: the channel will run by HTP, which means the highest value takes precedence.

(After HTP is set, master and playback faders will control this channel proportionally) *TIPS: For the detailed introduction of HTP / LTP, please read Chapter “HTP & LTP channel”.

Modify: libraries can be modified.



In Library menu, select the fixture model, press Modify Soft Key for modification, finally press BACK to exit, data will be saved automatically.

Delete: libraries can be deleted.



No.

Fixture Model

total channels

In Library menu, select fixture model, press Delete Soft Key, the library will be deleted.

Import: libraries can be imported from U-disk.



(TIPS: the R20 library should be copied to the root directory of U-disk from the PC firstly) Operation is as follows: 1) In Library menu, insert U-disk, press Import Soft

No.

Library name

Key, select library in U-disk by  Cursor Key or A/B Wheel.

2) Press Select Soft Key to import library to the console, then it can be used to patch fixtures.

Fixture

5.3 Fixture Setting Path: SETUP  Fixture Fixture requires not only library but also being patched to be controlled by the console. Select fixture model and assign DMX address for the fixtures, 1 fixture No. can be patched for 1 fixture.

FixPatch

FixInvert

R-Preset

(F1)

(F2)

(F4)

5.3.1 Fixture Patched Path: SETUP  Fixture  FixPatch In FixPatch menu, fixtures can be patched, set models and assigned DMX address (As shown on the right) FOX512 Moving Light Controller.

Fixture No.

Total Channels

Fixture Model

DMX Address PAGE: 13

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Operation is as follows: 1) Enter FixPatch menu.

2) Press Fixture Page Key, then select a single fixture by 1~20 Numeric Key 3) Set the corresponding FixModel to the fixture;(Remark: “000-dimmer＊” is for dimmable lights) 4) Set the corresponding DMX address to the fixture; 5) Repeat Steps 2~4 to patch other fixtures. *TIPS1: Select menu item by   Cursor Key, modify contents by  Cursor Key or A/B Wheel; *TIPS2: When the “？” appears next to the DMX addr, it means this DMX addr overlaps with other fixture’s (The indicator of corresponding Fixture Numeric Key will flash slowly), the fixture can’t be controlled unless a correct DMX addr is reassigned. *TIPS3: When the indicator of Fixture Numeric Key flashes fast, it means this fixture is selected.

When the indicator flashes slowly, it means the DMX addr of this fixture is not correct.

Skills of Fixture patch: 

Copy In FixPatch menu, the settings of a fixture can be copied to other fixtures by COPY Key, the DMX addr will be automatically assigned sequentially. For example, to copy the settings of fixture No.1 to No.2~10, the operation is as follows: --- Press and hold COPY  Press Fixture Numeric Key 1 (source)  Sequentially press Fixture Numeric Key 2~10 (target)



Delete In FixPatch menu, the settings of a fixture can be deleted by DEL Fix Soft Key. Or by DELETE Key to delete settings of multiple fixtures, operation: --- Press and hold DELETE  Sequentially press Fixture Numeric Key (to delete multiple fixtures)



Check --- Press and hold certain Fixture Page Key, if the indicators of certain Fixture Numeric Keys are bright, it means the fixtures in that page is already patched.



Modify DMX addr Selected fixtures with overlapping DMX addr can be reassigned a correct DMX addr by Corre-Err Soft Key;



Automatically assign DMX addr Press and hold Corre-Err Soft Key for 2 seconds to run AlignFix. The console will automatically reassign DMX addr to all the fixtures from addr 001.



Fixture Channel Test There are 2 libraries (CH20/CH40) in the console, which correspond to the fixtures of 20 or 40 channels. The sequence of the channels corresponds to the Attribute Faders’, for convenience to test fixture channels without custom library.

FOX512 Moving Light Controller.

PAGE: 14

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

5.3.2 Invert attribute value Path: SETUP  Fixture  FixInvert In FixInvert menu, the value sequence of Dimmer can be inverted, Pan & Tilt can be inverted or swapped.

CLR Soft Key --- used to clear invert of the selected fixture; Press and hold CLR soft key for 2 seconds, invert of all fixtures will be cleared.

5.4 Data File It’s necessary to use different data according to different occasions and users; and to prevent data modified by others, the best way is to backup data by U-disk. In DataFile menu, data can be saved and used. Data file supports FAT16 / FAT32 file format, and is compatible with NetDo EXP series consoles.

Path: SETUP  DataFile DataFile

SaveFile

ReadFile

DEL File

(F1)

(F2)

(F4)

5.4.1 Save File In DataFile menu, data can be saved in U-disk.

Insert U-disk, press SaveFile (F1) soft key to enter SaveFile menu, then select file name (FOX01~99) by  Cursor Key or A/B Wheel, and press ENTER soft key to save all the data into U-disk.

Remark: The new file will cover the old one in the U-disk if their file names are the same！

5.4.2 Read File In DataFile menu, data in the U-disk can be recovered to the console.

Insert U-disk, press ReadFile (F2) soft key to enter ReadFile menu, then select the file and press ENTER soft key to read the data file into the console.

Remark: The read file will cover the original one in the console.

5.4.3 Delete File In DataFile menu, data files in the U-disk can be deleted.

Insert U-disk, press DEL File (F4) soft key to enter DEL File menu, then select the file and press ENTER soft key to delete.

FOX512 Moving Light Controller.

PAGE: 15

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

5.5 Other Setting The Other… menu tree is shown on the right:

5.5.1 Data Initialized Path: SETUP  Other…  Initial…

Other…

Initial…

CH Fader

(F1)

(F2)

In Initial… menu, there are 4 soft keys as follows: 

CLR PB soft key --- Press and hold for 2 seconds to clear all programs in the console.



CLR Scene soft key --- Press and hold for 2 seconds to clear all scenes in the console.



CLR Patch soft key --- Press and hold for 2 seconds to clear all fixture patches in the console.



Init All soft key --- Press and hold for 2 seconds to erase all data and restore factory settings.

Remark: Please notice to backup the useful data before data initialization.

FOX512 Moving Light Controller.

PAGE: 16

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

6. Manual-Run Fixture Fixtures can be manually run after fixtures patched.

6.1

Manually-Run Fixture Attributes (such as Dimmer, Iris, Pan/Tilt) of selected fixtures can be manually modified by Attribute

Key or A/B Wheel, this operation is called Manual-Run Fixture, which can be operated under running or programming status.

TIPS: 

There are fixtures selected or given value if the indicators of Fixture Page Key flash.



Under selecting fixture status, the attribute value is modified if the indicators of fixture Numeric Keys flash slowly.



Indicator of the Reference Fixture will flash fast.

*Explanation: Manual-Run Fixture Data of manual-run

--- means manual control fixtures.

--- means the data modified by manual-run.

Important: Manual-Run Fixture is the operation of highest priority, its modified attribute value will cover the value of the running playback and output to the fixtures. The output of playback will not restore until the manual-run fixtures are cleared.

Operation of Manual-Run Fixture: 1) Select fixtures: Press Fixture Page Key to enter selecting fixture status, press Numeric Key to select single or multiple fixtures.

(Press two Numeric Keys at the same time and the fixtures between them will be also selected.

Fixtures can be also selected by “GROUP” function.)

2) Modify Attribute: Use Attribute Key to Modify attributes such as Dimmer, Pan/Tilt, Colour and Shutter. There are 20 Attribute Keys (in 2 Pages, turned by P2 key), each Attribute Key corresponds to 2 attributes. Use A/B Wheel to modify corresponding attributes after pressing Attribute Key. Correspondence table of attributes and A/B Wheel:

Key

A Wheel

B Wheel

Key

A Wheel

B Wheel

1

Dimmer

01-B

11

11-A

11-B

2

Iris

Shutter

12

12-A

12-B

3

Pan

Tilt

13

13-A

13-B

4

Colour1

Colour2

14

14-A

14-B

5

Zoom

Focus

15

15-A

15-B

6

Gobo1

Gobo2

16

16-A

16-B

7

Fun1

Fun2

17

17-A

17-B

8

Speed1

Speed2

18

18-A

18-B

9

Effect

Yellow

19

19-A

19-B

10

Cyan

Magenta

20

20-A

20-B

FOX512 Moving Light Controller.

PAGE: 17

Net.DO 6.2

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Clear Manual-Run Fixture There are 2 ways of clearing manual-run fixture: 

Clear All: Press CLEAR, all fixture selecting will be cancelled and value will be cleared.



Clear certain fixture: Press and hold CLEAR  press corresponding Fixture Numeric Keys.

(Clear multiple fixtures by multiple selections)

*TIPS1: After the data of manual-run is cleared, shielded playbacks & scenes will restore outputting. *TIPS2: Before manual-run fixture, it’s recommended to press CLEAR firstly to clear all data of manual-run, in order to avoid the output of unwanted value.

6.3

FIND function The “FIND” function is to light up and fixtures for fast checking. Operation of “FIND” will not affect the value of manual-run (no value is given). This function requires the support of related data in library.

Press FIND key, the indicator will flash slowly which means it’s in FIND status, press it again to exit; In FIND status, selected fixtures will be centered and lighted up (without value), Dimmer channel will be full and unaffected by Master Faders. Only the manually modified data will be saved after exiting.

TIPS: FIND function is recommended in editing Presets or recording Scenes, in order to show fixtures while avoid recording the data of Dimmer and Pan/Tilt.

6.4

LOCATE function The “LOCATE” function is to light up and locate fixtures for fast checking (will give value to each channel). Select fixtures and press LOCATE key, the fixtures will be centered and lighted up. This function requires the support of related data in library.

Remark:”LOCATE” function will give value to all channels of the selected fixtures.

6.5

GROUP function GROUP function is to organize the frequently used fixtures into groups for fast selecting. 

Call Group: Press GROUP key to enter group status  Press Numeric Key (Group No.)



Record Group: Select fixtures  press and hold RECORD key  Press Group Numeric Key



Delete Group: Press and hold DELETE  Press Group Numeric Key.



Copy Group: Press and hold COPY key  Press Group Numeric Key (source)  Press another Group Numeric Key (target).

6.6

Parity selecting and one by one control of fixtures Multiple selected fixtures can be controlled in the order of odd number / even number or one by one.

FOX512 Moving Light Controller.

PAGE: 18

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

6.6.1 Parity selecting of fixtures 1) Select multiple fixtures; 2) Press

Prev

Next

key at the same time to switch to the fixtures of odd number;

3) Press the above keys again to switch to the fixtures of even number; 4) Press the above keys again to exit parity selecting.

6.6.2 One by one control of fixtures Multiple fixtures can be controlled one by one. This function is very useful in editing Pan/Tilt, Pan/Tilt of selected fixtures can be fast edited one by one instead of being selected repeatedly. Operation: 1) Select multiple fixtures; 2) Press

Prev

or

Next

key continuously, fixtures can be selected individually in sequence.

3) Pressing the above keys at the same time will exit selecting.

6.7

FAN function FAN function is to expand the attributes of selected fixtures. Among the selected fixtures, attributes

of the first fixture and the last one change the most, and gradually descend to the middle, to achieve gradient effect. If use FAN to expand the Pan/Tilt attributes, the fixtures will show fan beam.

FAN is usually used in editing Pan/Tilt, it can also be used in other attributes such as Dimmer.

Operation of FAN: 1) Select fixtures; 2) Press Attribute Key to select attributes; 3) Press FAN key (its indicator will flash and the LCD screen show as right); 4) Rotate A/B Wheel to set the value (Range: +/- 50, the effect is according to the selected attribute); 5) Press FAN key again (its indicator will go out) to exit.

6.8

MODIFY function When the edit of Pan/Tilt is manually finished, the MODIFY function can be used to modify these

Pan/Tilt together as a whole while keep their relative position unchanged.

Press MODIFY key, its indicator will flash, which means it’s under the MODIFY mode; the value of selected fixtures will change relatively instead of becoming the same if their attribute is modified.

MODIFY is usually used in editing Pan/Tilt, it can also be used in other attributes such as Dimmer. *TIPS: In the modification of Pan/Tilt, this function is more suitable for the fixtures mounted in line.

6.9

Reference Fixture Multiple fixtures will align to a Reference Fixture when their attribute is manually modified.

6.9.1 Set “Reference Fixture” For example, to set fixture No.0_05 in Page 0 to be the “Reference Fixture”, operation is as follow: --- Press and hold Fixture Page Key FOX512 Moving Light Controller.

0--

 Press Numeric Key 5; (its indicator will flash fast) PAGE: 19

Net.DO 6.10

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Attribute ALIGN function

Copy the attribute of “Reference Fixture” to other fixtures to make their value same as ”Reference Fixture”.

There are 2 ways of Attribute ALIGN (firstly select fixtures and “Reference Fixture”) 

Align all attribute: Press ALIGN key to align all attribute of selected fixtures to “Reference Fixture”.



Align certain attribute: Press and hold ALIGN key  Press Attribute Key Successively; (Multiple attribute can be selected. For example: Dimmer  Gobo  …)

6.11

Lamp On / Lamp Off / Reset function

Certain fixtures require operation such as “Lamp On” to their bulbs before use. Operation: Press LOCATE for 2 seconds to enter Fixture Menu. In Fixture Menu, Lamp On/Lamp Off/Reset can be operated. Press BACK key to exit. 

Lamp On: In Fixture Menu, select fixtures, press Lamp On soft key.



Lamp Off: In Fixture Menu, press Lamp Off soft key.



Reset: In Fixture Menu, press Reset soft key.

Notice: The corresponding library must contain the MACRO information of Lamp On/Lamp Off/ Reset.

Library can be customized by <NetDO Library Software> in PC.

FOX512 Moving Light Controller.

PAGE: 20

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

7. PRESET In programming, certain attribute value (such as colour --- Red/Yellow/Blue…) which is frequently used can be recorded as PRESET for fast calling.

7.1

Import PRESET Path: SETUP  Fixture In Fixture menu, press R-Preset soft key, the console will import 20 presets from the library.

(Notice: the custom presets in the console would be covered.)

20 presets will be assigned to 20 preset Numeric Keys as follow: 1 ~ 10：Colour Presets; 11~20：Gobo Presets.

Remark: The above presets need the support of libraries with preset information, if not, presets can’t be imported but can be edited and recorded manually in the console.

7.2

Call PRESET 1） Select fixtures; 2） Press PRESET key to enter preset status (indicator above will be bright)  Press Numeric Key to select presets

7.3

Customize PRESET Preset can be customized.

7.3.1 Record PRESET Remark: Press CLEAR key before editing presets to avoid any unexpected affect; 1) Manual-Run fixtures to edit and modified their attribute to the required effect; 2) Press and hold RECORD  (select single or multiple attribute by Attribute Key  Select fixtures

by Fixture Numeric Keys)  Press Preset Numeric Key to finish recording; *TIPS1: the steps in the parentheses（） can be skipped. If skip, the console will record all attribute and fixtures that manually modified. *TIP2: PRESET only saves the modified attribute. It’s suggested to edit them in “FIND” status.

7.3.2 Delete PRESET Press and hold DELETE  Press Preset Numeric Key to finish deleting

7.3.3 Copy PRESET For example: copy PRESET 1 to PRESET 5.

Press and hold COPY  Press Preset Numeric Key 1 (source)  Press Preset Numeric Key 5 (target) to finish copying FOX512 Moving Light Controller.

PAGE: 21

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

8. SHAPE Shape-Generator(SHAPE) is greatly convenient in controling track & effect of fixtures, such as Circle, Rainbow, Wave etc. SHAPE can also combine different shapes of multiple fixtures to show various dynamic effects which can’t be easily achieved by Multi-Step Program. Take the SHAPE of circle for example, the operation of making circle is already finished by the console, just leave the parameters such as speed, size and direction to be set, which is more effective.

In the console there are many Shape-Generators, each one can be set for different effects such as Circle, Rainbow or Wave etc., and the parameters such as size, speed, direction and spread value etc.

Shapes can run together but up to 4 shapes can be superposed to 1 fixture at the same time.

8.1

Edit and call SHAPE SHAPE can be called in Manual-Run, Single-Step Program, Multi-Step Program and Scene.

Call SHAPE in Scene: Just need to record data of manual-run which uses SHAPE into Single-Step-Program or Scene.

When program or Scene runs, the corresponding SHAPE will run automatically.

Call SHAPE in Chase: Just add SHAPE into the Program Step in editing Multi-Step Program, when the program runs, the corresponding SHAPE will run automatically.

Example of calling SHAPE in Manual-Run, operation is as follow: 1） Select fixtures firstly, it’s suggested to use LOCATE to light up, and then set Colour, Dimmer and Pan/Tilt location; (the Pan/Tilt location is at the center of SHAPE) 2） Press PLAY key, the indicator will flash, which means now it is in SHAPE menu.

3） Press Edit... soft key to enter edit status, as shown on the right: 4） Select shape No. by   Key. (totally 4 Numbers, 4 Shapes can be surperposed in 1 fixture) 5） Open shape by  Key. (close by  Key) 6） Select Shape: Press Type soft key, select shape by A/B Wheel.

7） Set Speed / Direction: Press Speed soft key, set running speed and direction by A/B Wheel.

8） Set Size / Distortion: Press Size soft key, set shape size by A/B Wheel (for example: the size of circle), and the shape distortion (for example: distort circle to be ellipse).

9） Set Spread: Press Spread soft key, set spread amount by A/B Wheel to make the location of fixtures different in a shape.

For example: create wave effect in shape of Tilt. Make circling fixtures to be in different locations and move one after one. (The higher the spread amount is, the bigger the offset will be, and v.v.)

FOX512 Moving Light Controller.

PAGE: 22

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

*TIPS: Some shapes run based on current attribute, for example: Circle run to current Pan/Tilt location as the center, which means the whole shape will move when Pan/Tilt value is modified. And some are only for fixtures with special attribute. For example: rainbow is just for fixtures with RGB/CMY channels.

8.2

Stop SHAPE There are 3 ways of operation to stop shapes as follows: 

Stop all shapes: Press STOP key, all shapes will stop. Then Press PLAY key, the corresponding indicator will be bright and all shapes will restore running.



Stop shapes of certain fixtures: Steps: Select fixtures  Press PLAY to enter SHAPE menu  Press CLR Shape (F4) soft key Restore shape running by pressing CLEAR key to clear fixtures selecting



Run a “STOP” shape: If some fixtures use “STOP” shape in a program, call that program to stop the running shape of these fixtures.

8.3

Check shape of “Reference Fixture” Select “Reference Fixture”, press PLAY to enter SHAPE menu; it will display the running shapes.

8.4

Skill in using shape Example 1：Circle with 4 fixtures 1） Select 4 fixtures, set Pan/Tilt to make their spots overlapped (the center of circle); 2） Call a shape; set the Type=Circle, Speed=40%, Size=20%, Spread=25%.

Example 2：Move straight while circling Program a “Multi-Step Program” (Chase) of 2 steps to make the fixtures move straight, then call the same circle in both steps.

Example 3：Superpose shape Each fixture can run up to 4 shapes together to achieve multiple graphics.

E.g.: Call rainbow+circle together to make fixtures change colours like rainbow while circling.

Example 4：Use

shape of “Stop”

There is a Type of shape called “Stop”, which can be used to stop shapes between playback programs. It can force to output a static scene when there are shapes running.

E.g.: No.2 fixture calls “Circle” in Playback 1.03, while it calls “Stop” in Playback 1.04. Run Playback 1.03 and then Playback 1.04, the running shape “Circle” will be forced to stop by shape “Stop”.

FOX512 Moving Light Controller.

PAGE: 23

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

9. Program This chapter will introduce every function of program and how to edit program. 240 programs (including “Single-Step-Program” & “Multi-Step Program”) can be recorded, in 30 pages, 8 programs each page, and controlled by 10 playback faders.

Program Number (xx.xx), the first number before dot is the page number, the second one after dot is the playback number in that page (Correspond to playback faders).

PROGRAM menu tree: PROGRAM

9.1

EditStep

FadeTime

FadeSync

（F1）

(F3)

(F4)

HTP and LTP channel HTP channel (HIGHEST TAKES PRECEDENCE):

----- output the “highest value first”

This type of channel obeys the rule of “highest value first”, which means only the one with highest value will be output if multiple playbacks control a HTP channel at the same time. Dimmer channel must be HTP channel.

LTP channel (LATEST TAKES PRECEDENCE):

----- output the “latest value first”

This type of channel obeys the rule of “latest value first”, which means the last started playback will be output and kept until next one started if multiple playbacks control a LTP channel at the same time. Channels such as Pan/Tilt, Gobo should be LTP channel normally.

9.2

Empty LTP channel When the value of certain LTP channel in a program is empty (no value), this channel will be ignored in playback.

For example: Program1.01 only records Pan/Tilt while other channels are empty. Program1.02 only records Colour with other channels empty. Then in playback, Program1.01 will only control the moving while Program1.02 will only control the colour, they will not affect each other.

TIPS: In editing programs, the attribute value which is unmodified manually will be empty, LCD will display “ . ”. Press CLEAR to clear fixture value.

9.3

Clear LTP remaining value in Playback In playback, LTP channel will be output by the way of “latest value first”, so even the playback fader

is pulled down and the program is closed, the value of LTP channel will remain. Sometimes, in order to record a clean scene, the remaining value should be cleared.

Steps to clear remaining value are as follows: Pull down all playback faders to close programs  Press CLEAR key to clear the value

FOX512 Moving Light Controller.

PAGE: 24

Net.DO 9.4

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

Record Program

9.4.1 “Single-Step Program” and “Multi-Step Program” There are 2 kinds of program: “Single-Step Program” and “Multi-Step Program” (CHASE). 

The program with only 1 Step is called “Single-Step Program”, which is used as Scene.



The program with multiple Steps is called “Multi-Step Program”, which is used as Chase. (The number of Steps is not limited but it’s decided by the memory of console)

9.4.2 Fast record “Single-Step Program” The way of fast recording “Single-Step Program” in running status is introduced in the following. *TIPS: It’s suggested to clear LTP remaining value firstly in order to edit a clean scene.

“LOCATE” is suggested in Manual-Run, it will give initial value to all fixture channels to avoid the affect of other programs in playback. (Unless the superimposed effect is needed) Steps of recording: 1）Manual-Run to edit lighting effects; (Superimpose and run multiple saved scenes also can do) 2）Press and hold RECORD  (select fixtures by fixture Numeric Key)  Press Playback Key to finish recording; *TIPS: The step in Parentheses( ) can be skipped, all fixtures will be recorded if it is skipped.

Attribute can also be chosen to record: Press and hold RECORD  (select single or multiple attribute by Attribute Key)  Press Playback Key to finish recording; *TIPS: The console will only record the manually modified attribute, other attribute will be empty. Scene material that used to superimpose programs can be created by this way.

9.5

Edit Program Program can be created and edited in Program Menu, every step of “Multi-Step Program” can also

be created, edited and set internal speed in the menu. Steps are as follow: 1）Press PROGRAM to enter Program menu; (Indicator above Playback Key will be bright if there is program recorded inside) 2）Press Playback Key to select program; 3）Press EditStep soft key(F1) to enter Step menu; (As shown on the right) 3）If the program is empty, press NEW Step soft key(F4) to add a new step; 4）Edit lighting effect by Manual-Run Fixture; 5）Set TIME & CROSS% of current step(Used in Auto2 -- The speed and time of Auto2 mode) 

TIME: the time from current step to next step(Range: 0.1~180s), the shorter the time is, the faster the chase will run and vice versa;



CROSS: speed of crossfade between steps. (Range: 0~100%), 0% is slowest, 100% is fastest. For example: Cross=60%, it means using 40% of time to crossfade from the previous step to the current step, then using 60% of time stay in the current step.

FOX512 Moving Light Controller.

PAGE: 25

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

*TIPS1: use   Cursor Key to select menu item, use  Cursor Key to modify item; *TIPS2: “Single-Step Program” just needs to be edited 1 step. “Multi-Step Program” can be added new steps. The console will automatically copy the last step to the new one in order for a coherent chase, data of current step can be cleared by pressing CLEAR if it’s unwanted. *TIPS3：use  SETP  key to check data of every step, modified data will be saved automatically. *TIPS4：new step can be added after current step by pressing NewStep soft key at the current step. *TIPS5：current step can be deleted by pressing DEL Step soft key.

9.5.1 Copy Step Operation of copying step is as follow. 

Copy a whole program to the next step of current step: E.g.: copy Program1.01 to the next step of Step3 in Program1.02: 1）In EditStep menu, select Step3 in Program1.02; 2）Press and hold COPY  Press Playback Key of Program1.01 to finish copying.



Copy single step --- this function have to be achieved by the assistance of SCENE. E.g.: Copy Step9 in Program1.01 to Step10 in Program1.02; 1）In EditStep menu, select Step9 in Program1.01 and record it to a SCENE 2）Select Step10 in Program1.02 in EditStep menu, then call the SCENE just recorded.

9.6

Delete Program Operation of deleting the whole program is as follow: Press and hold DELETE key  Press Playback Key of the program to finish deleting.

9.7

Copy Program Copy a program to another, the operation is as follow: Press and hold COPY key  Press Playback Key(source)  Press another Playback Key(target); select Playback Page Key first if the target is in another page.

9.8

PLAYBACK of Program Push up Playback Fader or press Playback Key to run the corresponding program.

TIPS1: Press CLEAR firstly to ensure there is no data of Manual-Run to affect the playback running.

TIPS2: Ensure Master Faders of Playback and Grand are pushed up before running playback to

avoid no output of Dimmer.  

Up to 8 playbacks can run at the same time.

All HTP channels will follow playback faders to fade in/out. LTP channels will instantly start(LTP-inst) once the playback fader is pushed, it can also be set to follow playback fader to fade in(LTP-fade)

Status Program No.

Current Step Total Steps

Value of fader/HTP/LTP

Running Mode

9.8.1 Turn Pages of Playback Turn pages of playbacks by Playback Page Key. Press and hold the key for fast turning.

TIPS: Playback fader that pushed up will keep outputting after page is turned, the program of the same fader in the new page will not be output until the fader is pulled down to 0 and pushed up again.

FOX512 Moving Light Controller.

PAGE: 26

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

9.8.2 Playback Key In Playback Running menu, press F4 soft key to switch the controlling mode of Playback Key to be Swop, Flash or LTP output.

Swop

--- Only 1 playback can be output at the same time.

Flash

--- Press and hold Playback Key, the program will be output; Release to stop it.

LTP output ( * ) --- Output LTP channels in advanced without Dimmer output. Then push up Playback Fader to output Dimmer.

9.8.3 Use “Playback Menu” Playback menu is used to set the run parameters of “Multi-Step Program”. Press TIME/PB key to enter Playback menu, select program by Playback Key, then set the speed(Auto1), Run Mode, Start and End way of the current program. As shown on the right: 

Run Mode

External Speed (Auto1)

There are 3 modes of Synchronous trigger to run “Multi-Step Program”; Auto 1：the running of “Multi-Step Program” is controlled by external speed.

(In this mode, all steps will ignore the internal speed and run the external speed.)

Auto 2：the running of “Multi-Step Program” is controlled by internal speed.

Music：the running of “Multi-Step Program” is triggered by Music rhythm.

TIPS：Differences between internal speed and external speed of “Multi-Step Program”: --- Every “Multi-Step Program” has its own external speed which can be set in Playback Menu, the pace of all steps in the program will be the same while the program run external speed.

--- Every step of “Multi-Step Program” has its own internal speed, in EditStep menu, internal speed of each step can be customized individually. 

Start Way There are 2 ways to start the playback of “Multi-Step Program”: 1）fader: The “Multi-Step Program” will start running when Playback Fader is pushed up from 0.

2）GO: The connected “Multi-Step Program” will start running by pressing GO/STOP key or corresponding Playback Key. Programs will not start by pushing up Playback Fader.



End Way There are 2 ways to end the playback of “Multi-Step Program”: 1）Loop: When “Multi-Step Program” runs to the last step, it will return to the first step and run again.

2）Stop: When “Multi-Step Program” runs to the last step, it will stop until it’s started again.



Value of external speed (external speed of “Multi-Step Program”) External speed of “Multi-Step Program” is used for Synchronous trigger in Auto1. External speed of current “Multi-Step Program” can be set by A/B Wheel in Playback menu.

FOX512 Moving Light Controller.

PAGE: 27

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

9.8.4 Connect “Multi-Step Program” The “Multi-Step Program” control area (as shown on the right) can control the program (its number will be displayed in LCD screen) which is connected to the area.

2 ways to connect: 

First: Push Playback Fader or press Attribute Key to connect the corresponding program.

(Indicator of corresponding Attribute Key will flash fast)



Second: Press TIME/PB key to enter Playback menu, then press Attribute Key to connect the corresponding program. This method can avoid to affect the output when connecting.

9.8.5 Control “Multi-Step Program”  

9.9

GO/STOP: Program can be run and stopped by pressing GO/STOP key after it is connected to the control area;  STEP ：Running direction of program can be changed by pressing  STEP  key after it is connected to the control area; This key can also be used in STOP status to manually run steps gradually.

Fader Time of Playback Every program has its own fader time of playback, users have to know them well to get good grasp

of a show. The fader time of HTP channel and LTP channel is introduced individually as follows:

HTP Time  

HTP Time of Fade In: The time needed for HTP channel value to go from 0 to 100% after the Playback Fader is pushed up.

HTP Time of Fade Out: The time needed for HTP channel value to go from 100% to 0 after the Playback Fader is pulled down to bottom.

(Diagram of HTP Time)

LTP Time 

LTP Time of Fade In: The time needed for LTP channel value to go from original value to next value after the Playback Fader is pushed up.

(Diagram of LTP Time) FOX512 Moving Light Controller.

PAGE: 28

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

9.9.1 Edit Fader Time Path: PROGRAM  FadeTime Enter FadeTime menu, as shown on the right: Select program by Playback Key, set time by    Cursor Key or A/B Wheel. Range: 0.1s～59m 59s.

Clear the selected item by pressing CLR Time soft key.

Program No.

HTP Time

LTP Time

Remark: The modification of time doesn’t affect the running program, modified time will be used until the Playback Fader is pulled down to 0 and pushed up again.

9.10 Fader Synchronization of Playback Path: PROGRAM  FadeSync Enter FadeSync menu, as shown on the right: Select program by Playback Key, the following items of Fader Synchronization can be open/close: Program No. 

LTP-Sync

SHAPE-Sync

LTP-Sync When it is on: LTP channel value will change correspondingly with the Playback Fader pushed

up / pulled down.

(Especially suitable for Pan/Tilt to follow the change of fader) 

SHAPE--Speed Sync When it is on: Speed of SHAPE in the program will be synchronously controlled by Playback Fader, it is used for directly controlling of SHAPE speed.



SHAPE—Size Sync When it is on: Size of SHAPE in the program will be synchronously controlled by Playback Fader, it is used for directly controlling of SHAPE size.

FOX512 Moving Light Controller.

PAGE: 29

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

10. SCENE There are totally 2 pages (A / B) for SCENE, up to 20 scenes can be saved in each page. Switch page by SCENE A / B Function Key, select Scene Number by pressing 1~20 Numeric Key.

10.1 Edit SCENE 

Record Scene:

1) Manual-Run to edit lighting effects; (Superimpose and run multiple saved scenes or playbacks also can do); 2) Press and hold RECORD  (Select fixtures)  Press Scene Numeric Key to finish recording; *TIPS: Step in parentheses ( ) can be skipped, if it’s skipped, data of all fixtures will be recorded.

Attribute can also be chosen to record: Press and hold RECORD  (Select single or multiple attribute by Attribute Key)  Press Scene Numeric Key to finish recording; *TIPS: if select attribute, the console will only record the modified data of the selected attribute.

Create scene material through this method for scenes superimposed. 

Delete Scene: Press and hold DELETE  Press Scene Numeric Key to finish deleting;



Copy Scene: Press and hold COPY  Press Scene Numeric Key (source)  Press another Scene Numeric Key (target); (The target Scene Numeric Key can be in another page)



Check Scene: Press and hold RECORD, the indicator above the Scene Numeric Key will be bright if there is data saved in it.

10.2 Run SCENE Switch Pages by pressing SCENE A / B Function Key，select Scenes to run by 1~20 Numeric Key. *TIPS1: Press and hold SCENE A / B Function Key for 2 seconds to stop the output of all Scenes. *TIPS2: When the indicator of A / B Function Key is bright, it means the corresponding page is currently selected. When the indicator flashes slowly, it means there are Scenes in that page outputting. *TIPS3: It’s very convenient to make various lighting effects by superimposing Playbacks and Scenes.

Modes of Scene Numeric Key: 

Scenes in Page A are of LATCH mode, which means multiple scenes can be output together;



No.1~10 Scenes in Page B are of FLASH mode;



No.11~20 Scenes in Page B are of SWOP mode, only 1 scene can be output at the same time.

FOX512 Moving Light Controller.

PAGE: 30

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

11. Priority Levels of Different Operations Priority Levels of different operations are as follows: Manual-Run Fixture (Priority over)  SCENE (Priority over)  Playback

Priority between Playbacks:



Priority between Playbacks is according to the rules of HTP and LTP channel mentioned above.

(HTP is “Highest value takes precedence”; LTP is “Latest value takes precedence”.)

Priority between Scenes:



Between Scenes, all channels will be output according to the rule of HTP, which is more convenient to superimpose scenes.

Priority between SCENE and Playback:



Between SCENE and Playback, HTP channels will be output according to the rule of HTP; LTP channels will output the value of SCENE. (It means SCENE can superpose on Playback, playback will restore outputting after SCENE is cancelled.)

Priority of Manual-Run Fixture:



Manual-Run Fixture is of the highest priority, users have to be accustomed to using CLEAR key to clear the data of Manual-Run, to ensure the output of Playback and SCENE.

12. Software Upgrade Upgrade file can be obtained from our dealers and company website. Software has to be upgraded

by U-disk.

Steps of upgrade are as follow: 1) Copy the upgrade file to the root directory of U-disk; 2) Turn off the console; 3) Press and hold PROGRAM Key and SETUP Key at the same time, then turn on the console; Hold the keys until the LCD screen displays “UPDATE PROGRAM ===========”.

4) Press  Cursor Key to confirm, then insert U-disk, the console will automatically upgrade.

5) When the upgrade is finished, the console will automatically restart.

(Upgrade will not affect user’s data in the console)

FOX512 Moving Light Controller.

PAGE: 31

Net.DO

Lighting Control Equipment Co.,Ltd

http://www.netdo.com.cn

13. Data Protection Users can protect their own data in the console by the function DataLock and Login-Password

Steps to enter Data Protection menu: 1) Press and hold SETUP Key, turn on the console, hold the keys until the LCD screen displays “INPUT PASSWORD –“; 2) Press Numeric Key 11, 13, 18, 20 at the same time.

Enter SETUP of Data Protection menu, as shown on the right: 

Data-Lock: If user doesn’t hope the data in console to be modified by others, set the Data-Lock status to be “on”.

After this operation, the data in console can only be called but can’t be modified or programmed. To cancel the “Data-Lock”, set its status to be “off”.



Login-Password: User can set password protection, the password is required to be input when the console is turned on every time.

To use this function, set the “Login-Password” status to be “on”.

Login-Password = Press Numeric Key 1, 2, 9, 10 at the same time

NOTICE: Please keep this page, if forget the password, please contact the sellers for help.

FOX512 Moving Light Controller.

PAGE: 32