Vaping is a matter of several things coming together to get a nice result. Therefore, once your favorite vape device is in your hand, then the next thing you must do is to place it on a flat surface. Detach all the parts and place them in front of you. It will help you know the parts of the device well. It will help you understand the details about the parts. Further in the future, you can be able to use the parts properly.
Filling the e-liquid in the vape store is not that simple as it looks. All the tanks available in the vape store online have different door openings. Few have a top filling and a few are bottom-fill. However, 90% of the tanks are top fill, but still, before you re-fill, you must look at it. You need to open the filling cap, take the liquid bottle, and slowly fill the tank. Be careful not to overfill. Some tanks also come with a max fill line.
To get the best result, it is better not to use the tank once you completed filling it. You must let it sit for 5minutes at least. However, for many these 5minutes are long enough, but it will serve the purpose. Remember that the coil doesn’t soak the e-liquid at once. It needs some time. These minutes will help the cotton wick to soak the liquid well and will not give you the dry hit. Further, it will prevent the coil from getting burnt.
In case you are ready to vape, then for your information, two types of vape devices are available on the vape store online. These are fixed devices, variable wattage devices. In case the device you are using has no screen or no control switch, it means that you are using a fixed wattage device. So, you are ready to use it at once. Place your mouth on the drip tip and start drawing from the mouthpiece. You need to hold down the fire button at the same time as you are drawing. However, in case of using the variable wattage devices, here is the next slide for you.
Before starting the vape, you must adjust the settings properly. The proper setting is important to power the coil inside the tank. You must know what is the highest wattage setting or the lowest wattage setting. You must set the wattage setting properly. This will make sure you don’t overpower or under power the coil inside the tank, if set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier.