Westin Lombard Specs Package by Alexandra Ragland

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201

Project #:

18096

Item Description:

Lounge Chair A @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-201

Item Quantity:

6 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Lounge Chair

Model Name: Material/Finish: Dimensions: Width: Depth: Height: Arm Height: Seat Height: Seat Depth: Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Custom Lounge Chair Refer to Attached Drawing Refer to Attached Drawing 34" 36" 36" 24" 18" 28" Semi Attached Box Cushion Attached w/ Concealed D-Clips Poly Dacron Wrapped Outside: LBY-201.1; Majilite; Pattern: JX21G2V; Stellar; Clay; Nylon Fiber Matrix; ; Width: 54"; Fire Rating: UFAC/NFPA 260-1989, Cal 117 Section E; Durability: 100,000 Double Rubs; Inside: LBY-201.2; Richloom Contract; Pattern: Anouk; Ash; 59% Polyester, 41% Acrylic; ; Width: 56"; Fire Rating: NFPA 260 Cal 117; Durability: 50,000 Double Rubs

Notes:

-Image for concept only. Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201

Project #:

18096

Item Description:

Lounge Chair A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-201

Issue Date: Item Quantity:

6 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 4 Specified item(s) must be suitable for designated area(s). If vendor or manufacturer deems unsuitable, vendor or manufacturer must notify Gettys Group in writing within (48) hours after receipt of specification. 5 Specified item(s) must be first quality contract goods, materials, and workmanship and meet all applicable local codes and regulations. 6 All goods must be inspected prior to shipping and properly packaged to ensure their protection from damage, soiling, and infestation during shipping and handling. 7 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 8 Specified item(s) to be installed per manufacturer's recommended guidelines. 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Dimensions are approximate. Manufacturer to recommend appropriate dimensions and ergonomics based on the style of chair. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of COM fabrics. 16 Where applicable, manufacturer to procure all COM fabrics and inspect all COM fabrics upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM to Purchasing Agent. 17 All fabrication, filler, and liner must meet or exceed all applicable local fire codes. 18 All materials must be mildew resistant. 19 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 20 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 21 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 22 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 23 Minimum cushion construction to be a finished cushion that is fully reversible with a slight crown and residential feel. 24 All seat cushions to be fully reversible and have concealed, commercial quality zipper to match adjacent fabric, unless otherwise noted. 25 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 26 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted.

Page 2

LBY-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201

Project #:

18096

Item Description:

Lounge Chair A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-201

Issue Date: Item Quantity:

6 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation.

Page 3

LBY-201

34"

LBY-201.1 FAUX LEATHER

36" 28"

LBY-201.2 UPHOLSTERY

26"

PLAN VIEW

1/2" = 1'

26"

INSPIRATION IMAGE NTS

LBY-201.2 UPHOLSTERY

24 1/2"

LBY-201.2 FAUX LEATHER TIGHT WRAPPED 18"

WOOD FINISH TO MATCH SAMPLE PROVIDED BY DESIGNER

9 1/8"

36"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-201 LOUNGE CHAIR A AT LOBBY.DWG

2" NYLON CARPET GLIDES

FRONT ELEVATION

1/2" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

LOUNGE CHAIR A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

SIDE ELEVATION 1/2" = 1'

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair A Outside

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Address:

1530 Broadway Road Dracut MA 01826(978) 441-6800

Address:

245 E. 40th St. New York NY 10016(802) 238-2868

Fax:

(978) 441-0835

Fax:

Contact:

N/A

Contact:

Kathleen Buchan

E-mail: Web:

sales@majilite.com www.majilite.com

E-mail: Web:

buchan@stowevt.net http://www.majilite.com/

Phone:

Description:

Vinyl Upholstery

Pattern Number:

JX21G2V

Pattern Name: Color: Width:

Stellar Clay

Content: Durability:

Nylon Fiber Matrix 100,000 Double Rubs

Fire Rating:

UFAC/NFPA 260-1989, Cal 117 Section E

54"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Instructions: 1 Gettys Group does not guarantee any prior quantity estimates provided for budget or estimate purposes. 2 Attic stock quantities not included. Purchasing Agent to verify prior to purchase. 3 Purchasing Agent to notify Gettys Group of any changes or discrepancies to specification, manufacturer, etc. All changes must be approved by Gettys Group, in writing, prior to purchase. 4 Specified item(s) must be suitable for designated area(s). If vendor or manufacturer deems unsuitable, vendor or manufacturer must notify Gettys Group in writing within (48) hours after receipt of specification. 5 Specified item(s) must be first quality contract goods, materials, and workmanship and meet all applicable local codes and regulations. 6 All goods must be inspected prior to shipping and properly packaged to ensure their protection from damage, soiling, and infestation during shipping and handling. 7 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 8 Specified item(s) to be installed per manufacturer's recommended guidelines.

Page 1

LBY-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair A Outside

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Page 2

LBY-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201.2

Project #:

18096

Item Description:

Fabric @ Lounge Chair A Inside

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Richloom Contract

Source:

Richloom Contract

Address:

261 Fifth Avenue New York NY 10016800# : (800) 482-1818 (212) 685-5400

Address:

8721 Pointe Drive Broadview Heights OH 44147(440) 838-1012

Fax:

(212) 689-0230

Fax:

Contact:

N/A

Contact:

Elaine Tosko

E-mail: Web:

www.richloomcontract.com

E-mail: Web:

elainetosko@gmail.com N/A

Phone:

Description:

Upholstery at Interior Cushion

Pattern Name:

Anouk Ash

Color: Width:

Phone:

56"

Content: Durability:

59% Polyester, 41% Acrylic 50,000 Double Rubs

Fire Rating:

NFPA 260 Cal 117

Soil/Stain Treatment:

To be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-201.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-201.2

Project #:

18096

Item Description:

Fabric @ Lounge Chair A Inside

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Richloom Contract

Source:

Richloom Contract

Page 2

LBY-201.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202

Project #:

18096

Item Description:

Lounge Chair B @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd. - CHI

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England +44(0)1722 658 008

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England +44(0)1722 658 008

Phone:

Phone: Fax:

Fax: Contact: E-mail: Web:

Contact: E-mail: Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Melissa Jarrett melissa@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Description:

Low Back Arm Chair

Model Name: Material/Finish:

Yoisho Lounge Chair Medium Walnut

Width: Depth: Height: Arm Height: Seat Height:

27" 23.5" 28.5" 18.5" 14"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Attached Box Cushion w/ Contrasting Welt Tght fully Upholstered w/ Contrasting Welt Poly Dacron Wrapped Vinyl Upholstery: LBY-202.1; Fabric Innovations; Pattern: Too Good to be True; Buff; 100% Polyester; ; Width: 54"; Backing: 65% Polyester, 35% Cotton; Fire Rating: NFPA 260, CAL 117-E; Durability: 100,000 Double Rubs

Notes:

-Chair to have nylon carpet glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-202

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202

Project #:

18096

Item Description:

Lounge Chair B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

2 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd. - CHI

Instructions: 6 All goods must be inspected prior to shipping and properly packaged to ensure their protection from damage, soiling, and infestation during shipping and handling. 7 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 8 Specified item(s) to be installed per manufacturer's recommended guidelines. 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Dimensions are approximate. Manufacturer to recommend appropriate dimensions and ergonomics based on the style of chair. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of COM fabrics. 16 Where applicable, manufacturer to procure all COM fabrics and inspect all COM fabrics upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM to Purchasing Agent. 17 All fabrication, filler, and liner must meet or exceed all applicable local fire codes. 18 All materials must be mildew resistant. 19 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 20 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 21 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 22 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 23 Minimum cushion construction to be a finished cushion that is fully reversible with a slight crown and residential feel. 24 All seat cushions to be fully reversible and have concealed, commercial quality zipper to match adjacent fabric, unless otherwise noted. 25 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 26 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation.

Page 2

LBY-202

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Fabric Innovations

Source:

Fabric Innovations-CHI

Address:

Phone:

3111 Ponce De Leon Blvd. Coral Gables FL 33134(305) 860-5757

3111 Ponce De Leon Blvd Coral Gables FL 33134(305) 860-5757

Fax:

(305) 860-5795

Fax:

(425) 802-9805

Contact:

Meghan Dingman

E-mail: Web:

meghan@fabricinnovations.com www.fabricinnovations.com

Phone:

Contact: E-mail: Web:

www.fabricinnovations.com

Description:

Vinyl Upholstery

Pattern Name:

Too Good to be True Buff

Color: Width:

54"

Content: Durability:

100% Polyester 100,000 Double Rubs

Fire Rating: Backing:

NFPA 260, CAL 117-E 65% Polyester, 35% Cotton

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-202.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair B

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Fabric Innovations

Source:

Fabric Innovations-CHI

Page 2

LBY-202.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202A

Project #:

18096

Item Description:

Pillow @ Lounge Chair B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Throw Pillow

Dimensions:

20"W x 12"H

COM/COL:

Pillow Shape:

Upholstery: LBY-202A.1; Pollack; Pattern: T1008/01; Estuary; Milkweed; 48% Viscose, 35% Polyester, 10% Linen, 7% Cotton; Repeat: .25"W / .75" H; Width: 54"; Fire Rating: CA 117/NFPA 260; Durability: 35,000 Wyzenbeek Lumbar

Pillow Edge Detail:

Knife Edge

Pillow Fill:

9/10 Poly Down Fill

Pillow Closure Type:

Concealed Zipper To Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-202A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202A

Project #:

18096

Item Description:

Pillow @ Lounge Chair B

Area Name:

Lobby

Issue Date: Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-202A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202A.1

Project #:

18096

Item Description:

Pillow Fabric @ Lounge Chair B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Pollack

Source:

Pollack

Address:

Phone:

150 Varick Street New York NY 10013(212) 627-7766

150 Varick Street New York NY 10013(773) 203-3674

Fax:

(212) 924-8396

Fax:

Phone:

Contact: E-mail: Web:

customerservice@pollackassociates.com www.pollackassociates.com

Contact:

Dawn Parciak

E-mail: Web:

DawnP@pollackassociates.com www.pollackassociates.com

Description:

Pillow Upholstery

Pattern Number:

T1008/01

Pattern Name: Color: Width:

Estuary Milkweed

Repeat: Content:

.25"W / .75" H 48% Viscose, 35% Polyester, 10% Linen, 7% Cotton 35,000 Wyzenbeek

Durability:

54"

Fire Rating:

CA 117/NFPA 260

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-202A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-202A.1

Project #:

18096

Item Description:

Pillow Fabric @ Lounge Chair B

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Pollack

Source:

Pollack

Page 2

LBY-202A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-203

Project #:

18096

Item Description:

Sofa A @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-203

Item Quantity:

2 lot

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Modular Curved Sofa (1) Consists of Two Pieces

Model Name: Material/Finish: Dimensions: Width: Depth: Height:

Custom Sofa Oil Rubbed Bronze to Match Designer Sample Refer to Attached Drawing 128 3/8" 36 1/2" 18"

Seat Height: Seat Depth: Seat Cushion Style:

18" 36 1/2" Tight, fully upholsterd

Cushion Content: COM/COL:

Poly Down Wrapped Upholstery: LBY-203.1; Richloom Contract; Pattern: Cather; Quarry; 85% Polyester, 15% Nylon; Repeat: Horizontal Repeat: .12"; Width: 54"; Fire Rating: NFPA 260 CAL-117; Durability: 50,000 DBL Rubs

Notes:

-Image of Concept Only

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-203

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-203

Project #:

18096

Item Description:

Sofa A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-203

Issue Date: Item Quantity:

2 lot

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-203

89"

LBY-203.1 UPHOLSTERY

36 1/2"

128 1/2"

3 R1'-2 1/4" LBY-203.1 UPHOLSTERY

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-203 (1) LBY-203 SOFA A AT LOBBY.DWG

R1'-6 1/8"

PLAN VIEW 3/8"= 1'

INSPIRATION IMAGE NTS

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

SOFA A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

128 1/2"

30" 18" 12" 5" 13"

32 1/2" 4"

LBY-203.1 UPHOLSTERY

59" 118"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-203 (2) SOFA A AT LOBBY.DWG

2 UNITS TO HAVE CONCEALED GANGING MECHANISM

FRONT ELEVATION

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

3/8"= 1'

36 1/2" 4"

LBY-203 UPHOLSTERY

28" OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

SECTION 3/8"= 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

SOFA A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-203.1

Project #:

18096

Item Description:

Fabric @ Sofa A

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Richloom Contract

Source:

Richloom Contract

Address:

261 Fifth Avenue New York NY 10016800# : (800) 482-1818 (212) 685-5400

Address:

8721 Pointe Drive Broadview Heights OH 44147(440) 838-1012

Fax:

(212) 689-0230

Fax:

Contact:

N/A

Contact:

Elaine Tosko

E-mail: Web:

www.richloomcontract.com

E-mail: Web:

elainetosko@gmail.com N/A

Phone:

Description:

Upholstery

Pattern Name:

Cather Quarry

Color: Width: Repeat: Content:

Phone:

54"

Durability:

Horizontal Repeat: .12" 85% Polyester, 15% Nylon 50,000 DBL Rubs

Fire Rating:

NFPA 260 CAL-117

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Instructions: 1 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 2 Specified item(s) to be installed per manufacturer's recommended guidelines. 3 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 4 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 5 Refer to finish plans, elevations, and details for additional information and item location(s). 6 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 7 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 8 All Fabrics to be dimensionally stable. Fabric must be first run goods from full bolts. Printing, dyeing, and finishing methods should be appropriate for use of fabric. Fabric should be preshrunk, non-fading, and non-crocking. 9 Fabric should be free of defects and blemishes; do not 'tape' on surface of fabrics.

Page 1

LBY-203.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-203.1

Project #:

18096

Item Description:

Fabric @ Sofa A

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Richloom Contract

Source:

Richloom Contract

Instructions: 10 Manufacturer to provide dyelot sample to Gettys Group for approval prior to production.

Page 2

LBY-203.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204

Project #:

18096

Item Description:

Lounge Chair C @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-204

Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Curved Lounge Chair

Model Name: Material/Finish: Dimensions: Width: Depth: Height:

Custom Lounge Chair Refer to Attached Drawing Refer to Attached Drawing 27" 27" 32"

Seat Height:

18"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Tight Upholstered w/ Waterfall Edge Tight, Fully Upholstered Poly- Dacron Wrapped Inside Vinyl Uphostery: LBY-204.1; Fabric Innovations; Pattern: Classic Cocktail; Grey Hound; 100% Polyester; ; Width: 54"; Fire Rating: Cal TB 1117-013, NFPA 260; Durability: 100,000 Double Rubs; Outside Upholstery: LBY-204.2; Fabric Innovations; Pattern: Smart Suiting; T-Shirt; 69.89% Rayon, 29.84% Polyester, .27% Nylon; ; Width: 58"; Fire Rating: CAL TB 1117-013, UFAC Class 1, NFPA 260; Durability: 45,000 Double Rubs

Notes:

-Image for concept only.

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-204

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204

Project #:

18096

Item Description:

Lounge Chair C @ Lobby

Area Name:

Lobby

Drawing #:

LBY-204

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-204

27" 21"

27" 24"

LBY-204.1 VINYL LYB-204.2 UPHOLSTERY

4 LBY-204.2 UPHOLSTERY

EXPOSED WELT

PLAN VIEW

1/2" = 1'

INSPIRATION IMAGE NTS

17 1/2"

EXPOSED WELT LBY-204.1 VINYL LBY-204.2 UPHOLSTERY

15"

METAL SABOT. BRUSHED NICKEL

27 1/2"

FRONT ELEVATION

1/2" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

LOUNGE CHAIR C AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

6 1/2"

18"

WOOD TO MATCH DESIGNER SAMPLE

NYLON CARPET GLIDES

32 1/2"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-204 LOUNGE CHAIR C AT LOBBY.DWG

SIDE ELEVATION 1/2" = 1'

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204

Project #:

18096

Item Description:

Lounge Chair C @ Lobby

Area Name:

Lobby

Drawing #:

LBY-204

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LBY-204

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204.1

Project #:

18096

Item Description:

Inside Fabric @ Lounge Chair C

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Fabric Innovations

Source:

Fabric Innovations-CHI

Address:

Phone:

3111 Ponce De Leon Blvd. Coral Gables FL 33134(305) 860-5757

3111 Ponce De Leon Blvd Coral Gables FL 33134(305) 860-5757

Fax:

(305) 860-5795

Fax:

(425) 802-9805

Contact:

Meghan Dingman

E-mail: Web:

meghan@fabricinnovations.com www.fabricinnovations.com

Phone:

Contact: E-mail: Web:

www.fabricinnovations.com

Description:

Fabric at Interior Seat and Back

Pattern Name:

Classic Cocktail Grey Hound

Color: Width:

54"

Content: Durability:

100% Polyester 100,000 Double Rubs

Fire Rating:

Cal TB 1117-013, NFPA 260

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-204.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204.1

Project #:

18096

Item Description:

Inside Fabric @ Lounge Chair C

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Fabric Innovations

Source:

Fabric Innovations-CHI

Page 2

LBY-204.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204.2

Project #:

18096

Item Description:

Outside Fabric @ Lounge Chair C

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Fabric Innovations

Source:

Fabric Innovations-CHI

Address:

Phone:

3111 Ponce De Leon Blvd. Coral Gables FL 33134(305) 860-5757

3111 Ponce De Leon Blvd Coral Gables FL 33134(305) 860-5757

Fax:

(305) 860-5795

Fax:

(425) 802-9805

Contact:

Meghan Dingman

E-mail: Web:

meghan@fabricinnovations.com www.fabricinnovations.com

Phone:

Contact: E-mail: Web:

www.fabricinnovations.com

Description:

Fabric at Outside Shell of Lounge Chair

Pattern Name:

Smart Suiting T-Shirt

Color: Width:

58"

Content: Durability:

69.89% Rayon, 29.84% Polyester, .27% Nylon

Fire Rating:

CAL TB 1117-013, UFAC Class 1, NFPA 260

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

45,000 Double Rubs

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-204.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-204.2

Project #:

18096

Item Description:

Outside Fabric @ Lounge Chair C

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Fabric Innovations

Source:

Fabric Innovations-CHI

Page 2

LBY-204.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-205.1

Project #:

18096

Item Description:

Fabric @ Custom Bench

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Address:

1530 Broadway Road Dracut MA 01826(978) 441-6800

Address:

245 E. 40th St. New York NY 10016(802) 238-2868

Fax:

(978) 441-0835

Fax:

Contact:

N/A

Contact:

Kathleen Buchan

E-mail: Web:

sales@majilite.com www.majilite.com

E-mail: Web:

buchan@stowevt.net http://www.majilite.com/

Phone:

Description:

Vinyl Upholstery at Millwork Bench

Pattern Number:

JXBBK6V-A53

Pattern Name: Color: Width:

Nuance Icon Pebble

Content: Durability:

Nylon Fiber Matrix 100,000 Double Rubs

Fire Rating:

UFAC/NFPA 260-1989, Cal 117 Section E

54"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-205.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-205.1

Project #:

18096

Item Description:

Fabric @ Custom Bench

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Dimensions are approximate. Manufacturer to recommend appropriate dimensions and ergonomics based on the style of chair. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of COM fabrics. 16 Where applicable, manufacturer to procure all COM fabrics and inspect all COM fabrics upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM to Purchasing Agent. 17 All fabrication, filler, and liner must meet or exceed all applicable local fire codes. 18 All materials must be mildew resistant. 19 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 20 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 21 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 22 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 23 Minimum cushion construction to be a finished cushion that is fully reversible with a slight crown and residential feel. 24 All seat cushions to be fully reversible and have concealed, commercial quality zipper to match adjacent fabric, unless otherwise noted. 25 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 26 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation.

Page 2

LBY-205.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-206

Project #:

18096

Item Description:

Counter Stool A @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

8 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Curved Back Counter Stool

Model Name: Material/Finish:

Gipsy Barstool Dark Walnut Wood Legs

Width: Depth: Height:

21" 21.6" 41"

Seat Height:

31"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Tight, Fully Upholsterd Tight, Fully Upholstered Poly Dacron Wrapped Upholstery: LBY-206.1; DL Couch; Pattern: UHM-LR45; Lorraine; Pepper; Vinyl; ; Width: 54"; Backing: Polyester Back; Fire Rating: Passes Cal TB 117 & UFAC/NFPA 260; Durability: 100,000 Double Rubs

Notes:

-Counter Stool to Have Hard Surface Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-206

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-206

Project #:

18096

Item Description:

Counter Stool A @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

8 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 2

LBY-206

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-206.1

Project #:

18096

Item Description:

Fabric @ Counter Stool A

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Address:

499 E. County Rd. 300 S. P.O. Box 570 New Castle IN 47362(800) 433-0790 (800) 882-6824

Address:

444 North Orleans, Suite 350 Chicago IL 60610-

Phone: Fax:

(800) 433-0790 (800) 882-6824

N/A dlcouch@dlcouch.com www.dlcouch.com

Contact: E-mail:

Mollie Burdette mburdette@dlcouch.com www.dlcouch.com

Phone: Fax: Contact: E-mail: Web:

Web:

Description:

Upholstery at Counter Stool

Pattern Number:

UHM-LR-45 Lorraine

Pattern Name: Color: Width: Content: Durability: Fire Rating: Backing:

Mobile: (773) 426-8241

Pepper 54" Vinyl 100,000 Double Rubs Passes Cal TB 117 & UFAC/NFPA 260 Polyester Back

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-206.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-206.1

Project #:

18096

Item Description:

Fabric @ Counter Stool A

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Page 2

LBY-206.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-207

Project #:

18096

Item Description:

Lounge Chair D @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Curved Back Arm Chair w/ Wood Legs

Model Name: Material/Finish:

Libra Armchair Black Walnut

Width: Depth: Height: Arm Height: Seat Height: Seat Depth: Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

23" 24" 31" 27" 19" 19" Tight, Fully Upholstered Tight, Fully Upholstered Poly Dacron Wrapped Upholstery: LBY-207.1; Samelson Chatelane; Pattern: 78; Luscious; Iris; 60% Acrylic-40%, Nylon Face/80%, Polyester 20%; ; Width: 54"; Backing: Cotton; Fire Rating: CAL TB 117 Section E; Durability: 200,000 Double Rubs

Notes:

-Chair to Have Nylon Carpet Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-207

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-207

Project #:

18096

Item Description:

Lounge Chair D @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Instructions: 5 Specified item(s) must be first quality contract goods, materials, and workmanship and meet all applicable local codes and regulations. 6 All goods must be inspected prior to shipping and properly packaged to ensure their protection from damage, soiling, and infestation during shipping and handling. 7 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 8 Specified item(s) to be installed per manufacturer's recommended guidelines. 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Dimensions are approximate. Manufacturer to recommend appropriate dimensions and ergonomics based on the style of chair. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of COM fabrics. 16 Where applicable, manufacturer to procure all COM fabrics and inspect all COM fabrics upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM to Purchasing Agent. 17 All fabrication, filler, and liner must meet or exceed all applicable local fire codes. 18 All materials must be mildew resistant. 19 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 20 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 21 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 22 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 23 Minimum cushion construction to be a finished cushion that is fully reversible with a slight crown and residential feel. 24 All seat cushions to be fully reversible and have concealed, commercial quality zipper to match adjacent fabric, unless otherwise noted. 25 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 26 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation.

Page 2

LBY-207

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-207

Project #:

18096

Item Description:

Lounge Chair D @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Page 3

Source:

Jarrett Furniture Ltd.

LBY-207

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-207.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair D

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Samelson Chatelane

Source:

Samelson Chatelane

Address:

102 Madison Avenue 6th Floor New York NY 10016(212) 686-6829 (212) 213-6459

Address:

212 S. Marion Street Suite 27 Oak Park IL 603023124151272

N/A info@csamelson.com www.csamelson.com

Contact: E-mail:

Phone: Fax: Contact: E-mail: Web:

Phone: Fax:

Web:

Description:

Upholstery at Lounge Chair

Pattern Number:

78 Luscious

Pattern Name: Color: Width: Content: Durability:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Iris 54" 60% Acrylic-40%, Nylon Face/80%, Polyester 20% 200,000 Double Rubs

Fire Rating: Backing:

CAL TB 117 Section E Cotton

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-207.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-207.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair D

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Samelson Chatelane

Source:

Samelson Chatelane

Page 2

LBY-207.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-208

Project #:

18096

Item Description:

Lounge Chair E @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Curved Arm Chair with Oak Feet

Model Name: Material/Finish:

Edith Lounge Chair Metal Frame Powder Coat, Feet Natural Oak

Width: Depth: Height:

27" 28.7" 29.2"

Seat Height:

16.5"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Attached Box Cushion Tight, Fully Upholstered Poly Dacron Wrapped Upholstery: LBY-208.1; DL Couch; Pattern: UHV-ZC01; Zoetic; Nimble Cloud; 100% Polyester; Repeat: 7 3/8" Horizontal x 7" Vertical; Width: 58 3/8"; Fire Rating: CAL TB 117-2013 & NFPA 260; Durability: 80,000 Double Rubs

Notes:

-Chair to Have Nylon Carpet Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-208

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-208

Project #:

18096

Item Description:

Lounge Chair E @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 2

LBY-208

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-208.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair E

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Address:

499 E. County Rd. 300 S. P.O. Box 570 New Castle IN 47362(800) 433-0790 (800) 882-6824

Address:

444 North Orleans, Suite 350 Chicago IL 60610-

Phone: Fax:

(800) 433-0790 (800) 882-6824

N/A dlcouch@dlcouch.com www.dlcouch.com

Contact: E-mail:

Mollie Burdette mburdette@dlcouch.com www.dlcouch.com

Phone: Fax: Contact: E-mail: Web: Description:

Upholstery

Pattern Number:

UHV-ZC-01 Zoetic

Pattern Name: Color: Width:

Web:

Mobile: (773) 426-8241

Nimble Cloud 58 3/8"

Repeat: Content: Durability:

7 3/8" Horizontal x 7" Vertical

Fire Rating:

CAL TB 117-2013 & NFPA 260

Soil/Stain Treatment:

To Be Finished with Contract Gade Stain Repellent

100% Polyester 80,000 Double Rubs

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-208.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-208.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair E

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Page 2

LBY-208.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209

Project #:

18096

Item Description:

Sofa B @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

Arteriors

Source:

Arteriors

Address:

1745 Hayden Dr, Suite 100 Carrollton TX 75006800# : (877) 488-8866 (972) 488-9800

Address:

N/A

Phone:

(773) 218-3187

Phone: Fax:

Fax:

Contact:

N/A

Contact:

Rose Riggio @ Updates Group

E-mail: Web:

hd@arteriorscontract.com www.arteriorscontract.com

E-mail: Web:

updatesgroup@att.net www.arteriorshome.com/contract

Description:

Small Curved Sofa

Model Number: Model Name: Material/Finish:

8097 Turner Small Sofa Material: Wood, Finish: Grey Ash

Width: Depth: Height:

80" 32" 28"

Seat Height:

17"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Attached Box Cushion Tight, Fully Upholstered Poly Dacron Wrapped Upholstery: LBY-209.1; Architex; Pattern: 19660; Boulevard; Rose; 76% Polyester, 16% Vicose, 8% Linen; ; Width: 57"; Fire Rating: CAL TB 117-2013, NFPA 260/UFAC Class 1; Durability: 100,000 Double Rubs Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209

Project #:

18096

Item Description:

Sofa B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Arteriors

Source:

Arteriors

Instructions: 7 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 8 Specified item(s) to be installed per manufacturer's recommended guidelines. 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Dimensions are approximate. Manufacturer to recommend appropriate dimensions and ergonomics based on the style of chair. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of COM fabrics. 16 Where applicable, manufacturer to procure all COM fabrics and inspect all COM fabrics upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM to Purchasing Agent. 17 All fabrication, filler, and liner must meet or exceed all applicable local fire codes. 18 All materials must be mildew resistant. 19 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 20 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 21 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 22 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 23 Minimum cushion construction to be a finished cushion that is fully reversible with a slight crown and residential feel. 24 All seat cushions to be fully reversible and have concealed, commercial quality zipper to match adjacent fabric, unless otherwise noted. 25 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 26 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation.

Page 2

LBY-209

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209.1

Project #:

18096

Item Description:

Fabric @ Sofa B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Architex

Source:

Architex

Address:

3333 Commercial Avenue Northbrook IL 60062- United States (800) 621-0827

Address:

3333 Commercial Ave Northbrook IL 60062(847) 205-1333

Fax:

847-205-1510

Fax:

(847) 205-1510

Contact:

N/A

Contact:

Richard Atlas

E-mail: Web:

architex@architex-ljh.com http://www.architex-ljh.com

E-mail: Web:

richardatlas@architex-ljh.com www.architex-ljh.com

Phone:

Description:

Upholstery Fabric at Sofa

Pattern Number:

19660

Pattern Name: Color: Width:

Boulevard Rose

Content: Durability:

76% Polyester, 16% Vicose, 8% Linen 100,000 Double Rubs

Fire Rating:

CAL TB 117-2013, NFPA 260/UFAC Class 1

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Mobile: (312) 804-8585

57"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209.1

Project #:

18096

Item Description:

Fabric @ Sofa B

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Architex

Source:

Architex

Page 2

LBY-209.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209A

Project #:

18096

Item Description:

Pillow A @ Sofa B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Throw Pillow

Dimensions:

20"W x 20"H

COM/COL:

Pillow Shape:

Upholstery: LBY-209A.1; Pollack; Pattern: 2465/01; Nairobi; White Gold; 100% Polyester; Repeat: 14"W x 20 3/4"H; Width: 55"; Backing: Acrylic Latex Backed; Fire Rating: NFPA 260 class 1; Durability: 100,000 Double Rubs Square

Pillow Edge Detail:

Knife Edge

Pillow Fill:

90/10 Poly Down Blend

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209A

Project #:

18096

Item Description:

Pillow A @ Sofa B

Area Name:

Lobby

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-209A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209A.1

Project #:

18096

Item Description:

Fabric @ Pillow A

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Pollack

Source:

Pollack

Address:

Phone:

150 Varick Street New York NY 10013(212) 627-7766

150 Varick Street New York NY 10013(773) 203-3674

Fax:

(212) 924-8396

Fax:

Phone:

Contact: E-mail: Web:

customerservice@pollackassociates.com www.pollackassociates.com

Description:

Polyester Upholstery

Pattern Number:

2465/01

Pattern Name: Color: Width:

Nairobi White Gold

Repeat: Content:

14"W x 20 3/4"H 100% Polyester 100,000 Double Rubs

Durability:

Contact:

Dawn Parciak

E-mail: Web:

DawnP@pollackassociates.com www.pollackassociates.com

55"

Fire Rating:

NFPA 260 class 1

Backing:

Acrylic Latex Backed

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209A.1

Project #:

18096

Item Description:

Fabric @ Pillow A

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Pollack

Source:

Pollack

Page 2

LBY-209A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209B

Project #:

18096

Item Description:

Pillow B @ Sofa B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Throw Pillow

Dimensions:

20"H x 20"W

COM/COL:

Pillow Shape:

Upholstery: LBY-209B.1; No Manufacturer; Pattern: Carlito; Smoke; 100% Polyester; Repeat: 14"V x 12.72"H; Width: 54"; Railroad: Yes; Backing: Synthetic Latex Blend; Durability: 50,000 Double Rubs Square

Pillow Edge Detail:

Knife Edge

Pillow Fill:

90/10 Poly Down Blend

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209B

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209B

Project #:

18096

Item Description:

Pillow B @ Sofa B

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-209B

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209B.1

Project #:

18096

Item Description:

Pillow Fabric @ Sofa B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Integra Fabrics

Source:

Address:

3650 Ralph Ellis Boulevard Loris SC 29569(843) 756-4700

Address:

Fax:

(843) 756-4702

Fax:

Contact:

N/A

Contact:

Ashley P. Smith

E-mail: Web:

N/A www.integrafabrics.com

E-mail: Web:

ashley.smith@integrafabrics.com www.integrafabrics.com

Phone:

Description:

Upholstery

Pattern Name:

Carlito Smoke

Color: Width: Repeat: Content:

Phone:

Integra Fabrics

(843) 756-4700 Mobile: (843) 467-8514

54"

Durability:

14"V x 12.72"H 100% Polyester 50,000 Double Rubs

Railroad:

Yes

Fire Rating: Backing:

Synthetic Latex Blend

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Page 1

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

LBY-209B.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209C

Project #:

18096

Item Description:

Pillow C @ Sofa B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Throw Pillow

Dimensions:

20"H x 20"W

COM/COL:

Pillow Shape:

Upholstery: LBY-209C.1; Carnegie; Pattern: Maxim; 6188 16; 100% Polyester; ; Width: 54"; Backing: Acylic Backed; Fire Rating: California Bulletin 1172013, NFPA 260 Class 1; Durability: 100,000 Double Rubs Square

Pillow Edge Detail:

Knife Edge

Pillow Fill:

90/10 Poly Down Blend

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209C

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209C

Project #:

18096

Item Description:

Pillow C @ Sofa B

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-209C

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209C.1

Project #:

18096

Item Description:

Fabric @ Pillow C

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Carnegie

Source:

Carnegie

Address:

110 North Centre Ave Rockville Centre NY 11570800# : (800) 727-6770

Address:

222 Merchandise Mart Plaza Ste. 1123-A Chicago IL 60654(312) 464-9376

Fax:

(516) 678-6848

Fax:

(312) 464-9571

Contact:

N/A

Contact:

Kathleen Neary

E-mail: Web:

service@carnegiefabrics.com www.carnegiefabrics.com

E-mail: Web:

kneary@carnegiefabrics.com www.carnegiefabrics.com

Phone:

Description:

Upholstery

Pattern Name:

Maxim 6188 16

Color: Width:

Phone:

Mobile: (312) 593-6069

54"

Content: Durability:

100% Polyester 100,000 Double Rubs

Fire Rating: Backing:

California Bulletin 117-2013, NFPA 260 Class 1 Acylic Backed

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-209C.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-209C.1

Project #:

18096

Item Description:

Fabric @ Pillow C

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Carnegie

Source:

Carnegie

Page 2

LBY-209C.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-210

Project #:

18096

Item Description:

Counter Stool B @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Four Leg Counter Stool- Modified from Running Line

Model Name: Material/Finish:

Oskar Barstool Medium Walnut Wood Finish

Width: Depth: Height:

22" 21.3" 40" (Modified)

Seat Height:

25" (Modified)

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Tight, Fully Upholstered Tight, Fully Upholstered Poly Dacron Wrapped Vinyl Upholstery: LBY-210.1; Majilite; Pattern: JXNL3V; Metallic Paragon; Slate; Nylon Fiber Matrix; ; Width: 54"; Fire Rating: UFAC/NFPA 260- 1989, California 117 Section E, Tunnel Test: (ASTM E84); Durability: 100,000 Double Rubs

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-210

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-210

Project #:

18096

Item Description:

Counter Stool B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

6 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 2

LBY-210

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-210.1

Project #:

18096

Item Description:

Fabric @ Counter Stool B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Address:

1530 Broadway Road Dracut MA 01826(978) 441-6800

Address:

245 E. 40th St. New York NY 10016(802) 238-2868

Fax:

(978) 441-0835

Fax:

Contact:

N/A

Contact:

Kathleen Buchan

E-mail: Web:

sales@majilite.com www.majilite.com

E-mail: Web:

buchan@stowevt.net http://www.majilite.com/

Phone:

Description:

Vinyl Upholstery at Counter Stool

Pattern Number:

JXNL3V

Pattern Name: Color: Width:

Metallic Paragon Slate

Content:

Nylon Fiber Matrix 100,000 Double Rubs

Durability: Fire Rating:

54"

UFAC/NFPA 260- 1989, California 117 Section E, Tunnel Test: (ASTM E84)

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-210.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-210.1

Project #:

18096

Item Description:

Fabric @ Counter Stool B

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Page 2

LBY-210.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211

Project #:

18096

Item Description:

Lounge Chair F @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-211

Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Curved Back Lounge Chair

Model Name: Material/Finish: Dimensions: Width: Depth: Height:

Custom Lounge Chair Refer to Attached Drawing Refer to Attached Drawing 30" 28" 36"

Seat Height: Seat Depth: Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

18" 18" Attached Box Cushion Tight, Fully Upholstered Poly Dacron Wrapped Inside: LBY-211.1; Richloom Contract; Pattern: Canton; Dove; 100% Polyester; Repeat: 2" Vertical x 4.5" Horizontal; Width: 55"; Fire Rating: NFAP 260; Outside: LBY-211.2; Majilite; Pattern: JX21L4V; Stellar; Stone; Nylon Fiber Matrix; ; Width: 54"; Fire Rating: UFAC/NFPA 260-1989, Cal 117 Section E; Durability: 100,000 Double Rubs

Notes:

-Image for Concept Only

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-211

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211

Project #:

18096

Item Description:

Lounge Chair F @ Lobby

Area Name:

Lobby

Drawing #:

LBY-211

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-211

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211

Project #:

18096

Item Description:

Lounge Chair F @ Lobby

Area Name:

Lobby

Drawing #:

LBY-211

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Page 3

Source:

To Bid

LBY-211

BACK CUSHION ATTACHED W/ CONCEALED D-CLIPS 30"

28" 20"

LBY-211.1 UPHOLSTERY LBY-211.2 VINYL

4 LBY-211.1 UPHOLSTERY

28"

PLAN VIEW

1/2"=1'

INSPIRATION IMAGE NTS

22"

FAUX LEATHER LBY-211.2

AMERICAS | ASIA PACIFIC | MIDDLE EAST

WOOD DETAIL TO MATCH SAMPLE PROVIDED BY DESIGNER

FRONT ELEVATION

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

24" 30" 36"

18"

UPHOLSTERY LBY-211.1

18" 6" 6" 6"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-211 LOUNGE CHAIR F IN LOBBY.DWG

1/2"=1'

DRAWING:

LOUNGE CHAIR F IN LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

SIDE ELEVATION 1/2"=1'

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair F

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Richloom Contract

Source:

Richloom Contract

Address:

261 Fifth Avenue New York NY 10016800# : (800) 482-1818 (212) 685-5400

Address:

8721 Pointe Drive Broadview Heights OH 44147(440) 838-1012

Fax:

(212) 689-0230

Fax:

Contact:

N/A

Contact:

Elaine Tosko

E-mail: Web:

www.richloomcontract.com

E-mail: Web:

elainetosko@gmail.com N/A

Phone:

Description:

Interior Seat, Back Cushion, & Back Upholstery Fabric

Pattern Name:

Canton Dove

Color: Width:

55"

Repeat: Content:

2" Vertical x 4.5" Horizontal 100% Polyester

Fire Rating:

NFAP 260

Soil/Stain Treatment:

To Be Finished With Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-211.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair F

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Richloom Contract

Source:

Richloom Contract

Page 2

LBY-211.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211.2

Project #:

18096

Item Description:

Fabric @ Lounge Chair F

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Address:

1530 Broadway Road Dracut MA 01826(978) 441-6800

Address:

245 E. 40th St. New York NY 10016(802) 238-2868

Fax:

(978) 441-0835

Fax:

Contact:

N/A

Contact:

Kathleen Buchan

E-mail: Web:

sales@majilite.com www.majilite.com

E-mail: Web:

buchan@stowevt.net http://www.majilite.com/

Phone:

Description:

Vinyl Upholstery at Outside Back of Lounge Chair

Pattern Number:

JX21L4V

Pattern Name: Color: Width:

Stellar Stone

Content: Durability:

Nylon Fiber Matrix 100,000 Double Rubs

Fire Rating:

UFAC/NFPA 260-1989, Cal 117 Section E

54"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-211.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-211.2

Project #:

18096

Item Description:

Fabric @ Lounge Chair F

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Page 2

LBY-211.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-212.1

Project #:

18096

Item Description:

Fabric @ Custom Built-In Banquette 61

Area Name:

Lobby

Issue Date: Revision(s): Item Quantity:

Manufacturer:

Architex

Source:

Architex

Address:

3333 Commercial Avenue Northbrook IL 60062- United States (800) 621-0827

Address:

3333 Commercial Ave Northbrook IL 60062(847) 205-1333

Fax:

847-205-1510

Fax:

(847) 205-1510

Contact:

N/A

Contact:

Richard Atlas

E-mail: Web:

architex@architex-ljh.com http://www.architex-ljh.com

E-mail: Web:

richardatlas@architex-ljh.com www.architex-ljh.com

Phone:

Description:

Upholstery Fabric

Pattern Name:

Gilligan Mushroom

Color: Width:

Phone:

Mobile: (312) 804-8585

55"

Content: Durability:

68% Viscose, 19% Cotton, 13% Linen

Fire Rating:

CAL 117-2013 NFPA 260 UFA Class 1

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

100,000 Double Rubs

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-212.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-212.1

Project #:

18096

Item Description:

Fabric @ Custom Built-In Banquette 63

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Architex

Source:

Architex

Page 2

LBY-212.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-212A

Project #:

18096

Item Description:

Pillow @ Custom Banquette

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-212A

Item Quantity:

8 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Custom Throw Pillow

Dimensions:

48" Length x 16" Hight

COM/COL:

Pillow Shape:

Pillow Fabric: LBY-212A.1; Architex; Pattern: 19686; Gilligan; Mushroom; 68% Vicose, 19% Cotton, 13% Linen; ; Width: 55"; Fire Rating: CAL TB 117-2013, NFPA 260/UFAC Class 1; Durability: 100,000 Double Rubs Rectangle

Pillow Edge Detail:

Knige Edge

Pillow Fill:

95/5 Poly Down Fill

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Notes:

- Concealed D-Clips to attach Pillow to Banquette Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-212A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-212A

Project #:

18096

Item Description:

Pillow @ Custom Banquette

Area Name:

Lobby

Drawing #:

LBY-212A

Issue Date: Item Quantity:

8 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-212A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-212A.1

Project #:

18096

Item Description:

Fabric @ Pillow A

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Architex

Source:

Architex

Address:

3333 Commercial Avenue Northbrook IL 60062- United States (800) 621-0827

Address:

3333 Commercial Ave Northbrook IL 60062(847) 205-1333

Fax:

847-205-1510

Fax:

(847) 205-1510

Contact:

N/A

Contact:

Richard Atlas

E-mail: Web:

architex@architex-ljh.com http://www.architex-ljh.com

E-mail: Web:

richardatlas@architex-ljh.com www.architex-ljh.com

Phone:

Description:

Upholstery Fabric

Pattern Number:

19686

Pattern Name: Color: Width:

Gilligan Mushroom

Content: Durability:

68% Vicose, 19% Cotton, 13% Linen 100,000 Double Rubs

Fire Rating:

CAL TB 117-2013, NFPA 260/UFAC Class 1

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Mobile: (312) 804-8585

55"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-212A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-212A.1

Project #:

18096

Item Description:

Fabric @ Pillow A

Area Name:

Lobby

Issue Date: Item Quantity:

Manufacturer:

Architex

Source:

Architex

Page 2

LBY-212A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-301

Project #:

18096

Item Description:

Coffee Table A @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-301

Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Description:

Wood Half Round Coffee Table

Model Name: Dimensions:

Custom Coffee Table Refer to Attached Drawing 35"

Width: Depth: Height: Finish:

Notes:

To Bid

35" 15" Wood to Match Designer Sample, Sealed w/ Clear Protective Finish to Prevent Damage

-Table to Have Nylon Carpet Adjustable Levelers

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-301

Project #:

18096

Item Description:

Coffee Table A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-301

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LBY-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-301

Project #:

18096

Item Description:

Coffee Table A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-301

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation. 35 If table includes a top by others, template of table top must be sent from table manufacturer to ensure correct dimensions and alignment. 36 Stone Tops to be sealed per Manufacturer's recommendation.

Page 3

LBY-301

WOOD FINISH TO MATCH DESIGNER SAMPLE

35"

18"

PLAN VIEW 3/4" = 1'

WOOD FINISH TO MATCH DESIGNER SAMPLE

15"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-201 COFFEE TABLE A AT LOUNGE.DWG

NYLON CARPET LEVELERS

18"

FRONT ELEVATION 3/4" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

COFFEE TABLE A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-302

Project #:

18096

Item Description:

Side Table A @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Address:

4700 Littlejohn St. Baldwin Park CA 91706(626) 333-1177

Address:

425 Flock Avenue Naperville IL 60565(630) 730-0481

Fax:

(626) 628-3115

Fax:

Contact:

N/A

Contact:

Sondra Walbert

E-mail: Web:

info@madegoods.com www.madegoods.com

E-mail: Web:

sondra@sondrawalbert.com https://www.sondrawalbert.com/

Phone:

Description:

Faux Shagreen Side Table

Model Name:

Harriet

Width:

22" 22"

Depth: Height: Finish:

22"

Notes:

-Table to Have Nylon Adjustable Gliders

Realistic Faux Shagreen - Color, Antique Mirror

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-302

Project #:

18096

Item Description:

Side Table A @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LBY-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-302

Project #:

18096

Item Description:

Side Table A @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Instructions: 35 If table includes a top by others, template of table top must be sent from table manufacturer to ensure correct dimensions and alignment. 36 Stone Tops to be sealed per Manufacturer's recommendation.

Page 3

LBY-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-303

Project #:

18096

Item Description:

Side Table B @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Address:

4700 Littlejohn St. Baldwin Park CA 91706(626) 333-1177

Address:

425 Flock Avenue Naperville IL 60565(630) 730-0481

Fax:

(626) 628-3115

Fax:

Contact:

N/A

Contact:

Sondra Walbert

E-mail: Web:

info@madegoods.com www.madegoods.com

E-mail: Web:

sondra@sondrawalbert.com https://www.sondrawalbert.com/

Phone:

Description:

Onyx Side Table

Model Name:

Rosana

Width:

8" 12"

Depth: Height: Finish:

24"

Notes:

-Table to Have Nylon Adjustable Glides -Base to be Weighted

Onyx Base, Iron Top

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-303

Project #:

18096

Item Description:

Side Table B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LBY-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-303

Project #:

18096

Item Description:

Side Table B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Page 3

LBY-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-304

Project #:

18096

Item Description:

Coffee Table B @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

4 ea

Manufacturer:

Arteriors

Source:

Arteriors

Address:

1745 Hayden Dr, Suite 100 Carrollton TX 75006800# : (877) 488-8866 (972) 488-9800

Address:

N/A

Phone:

(773) 218-3187

Phone: Fax:

Fax:

Contact:

N/A

Contact:

Rose Riggio @ Updates Group

E-mail: Web:

hd@arteriorscontract.com www.arteriorscontract.com

E-mail: Web:

updatesgroup@att.net www.arteriorshome.com/contract

Description:

Bronze Coffee Table

Model Number:

2101

Model Name:

Meadow Cocktail Table

Width:

36"

Depth: Height: Finish:

24" 14" Oil Rubbed Bronze

Notes:

-Table to Have Nylon Adjustable Levelers

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-304

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-304

Project #:

18096

Item Description:

Coffee Table B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

4 ea

Manufacturer:

Arteriors

Source:

Arteriors

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LBY-304

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-304

Project #:

18096

Item Description:

Coffee Table B @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

4 ea

Manufacturer:

Arteriors

Source:

Arteriors

Page 3

LBY-304

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-305

Project #:

18096

Item Description:

Coffee Table C @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

Made Goods

Source:

Made Goods

Address:

4700 Littlejohn St. Baldwin Park CA 91706(626) 333-1177

Address:

425 Flock Avenue Naperville IL 60565(630) 730-0481

Fax:

(626) 628-3115

Fax:

Contact:

N/A

Contact:

Sondra Walbert

E-mail: Web:

info@madegoods.com www.madegoods.com

E-mail: Web:

sondra@sondrawalbert.com https://www.sondrawalbert.com/

Phone:

Description:

Oval Coffee Table w/ Faux Shagreen Finish

Model Name:

Cara Oval Coffee Table Reffer to Spec

Dimensions: Width: Depth: Height:

24"

Finish:

48" 18" Sand Realistic Faux Shagreen, Antique Mirror

Notes:

-Table to Have Nylon Adjustable Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-305

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-305

Project #:

18096

Item Description:

Coffee Table C @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Made Goods

Source:

Made Goods

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LBY-305

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-305

Project #:

18096

Item Description:

Coffee Table C @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Made Goods

Source:

Made Goods

Page 3

LBY-305

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-306

Project #:

18096

Item Description:

Counter Height Table A @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-306

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Counter Height Communal Table with Intergrated Power and Planter Wall

Model Name: Dimensions: Width:

Custom Counter Height Table Refer to Drawing 60"

Depth: Height:

36"

Top Mat'l/Finish: Base Mat'l/Finish:

178" Daltile- Porcelain- CM10 Vickery Taupe Walnut Wood to Match Designer Sample

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-306

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-306

Project #:

18096

Item Description:

Counter Height Table A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-306

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LBY-306

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-306

Project #:

18096

Item Description:

Counter Height Table A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-306

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LBY-306

178" 163"

36"

MOCKETT PCS36/2/B/UI POP UP OUTLET

TOP- DALTILE, CM10, VICKERY TAUPE

PLAN VIEW

3/8" = 1'

OIL RUBBED BRONZE

34"

31"

WOOD TO MATCH SAMPLE PROVIDED BY DESIGNER

1 4"

3 4"

OPEN

1 4"

TOP- DALTILE, CM10, VICKERY TAUPE

102"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-306 (1) COUNTER HEIGHT TABLE A AT LOBBY.DWG

36"

60"

91"

R10"

48"

15"

20"

FRONT ELEVATION 3/8" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

COUNTER HEIGHT TABLE A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

3/8" = 1'

OPEN

14" 37 1/2"

44"

EQ 2"

31"

WOOD FINISH TO MATCH SAMPLE PROVIDED BY DESIGNER

OPEN 20 1/2"

OPEN 38 1/2"

OPEN

OPEN J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-306 (2) COUNTER HEIGHT TABLE A AT LOBBY.DWG

7 1/2"

OIL RUBBED BRONZE

OIL RUBBED BRONZE ROD

SIDE ELEVATION

24"

14"

NICHE FOR PRINTER

22 5/8"

REMOVABLE PLANTER OIL RUBBED BRONZE TO MATCH SAMPLE PROVIDED BY DESIGNER

OPEN

SIDE ELEVATION 3/8" = 1'

INSPIRATION IMAGE NTS

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

COUNTER HEIGHT TABLE A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-307

Project #:

18096

Item Description:

Coffee Table D @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-307

Item Quantity:

6 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Concrete Coffee Table

Model Name: Dimensions: Width:

Custom Coffee Table Refer to Attached Drawing 24"

Depth: Height: Finish:

26" Refer to Attached Drawing

Top Mat'l/Finish: Base Mat'l/Finish:

Oil Rubbed Bronze Concrete Look Finish

Notes:

-Base to not be solid concrete- stable enough to not tip, but light enough to be moved. -Image for Concept Use Only

24"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-307

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-307

Project #:

18096

Item Description:

Coffee Table D @ Lobby

Area Name:

Lobby

Drawing #:

LBY-307

Issue Date: Item Quantity:

6 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LBY-307

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-307

Project #:

18096

Item Description:

Coffee Table D @ Lobby

Area Name:

Lobby

Drawing #:

LBY-307

Issue Date: Item Quantity:

6 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LBY-307

24" 18"

1 1/2"

PLAN VIEW

INSPIRATION IMAGE NTS

1 1/2"

3/4" = 1'

OIL RUBBED BRONZE

SATIN NICKEL

16" 9 3/4"

26"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-307 COFFEE TABLE D AT LOBBY.DWG

CONCRETE LOOK

FRONT ELEVATION 3/4" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

COFFEE TABLE D AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-308

Project #:

18096

Item Description:

Cafe Table A @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-308

Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Description:

Custom Quartz Top Dining Table

Model Name: Dimensions: Width:

Custom Cafe Table Refer to Attached Drawing 30"

Depth: Height:

26"

To Bid

30"

Top Mat'l/Finish: Base Mat'l/Finish:

Quartz- Cambria Bellingham or Approved Alternate

Notes:

-Image for Concept Use Only

Walnut Wood Match Designer Sample

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-308

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-308

Project #:

18096

Item Description:

Cafe Table A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-308

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LBY-308

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-308

Project #:

18096

Item Description:

Cafe Table A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-308

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LBY-308

30" QUARTZ TO MATCH CAMBRIA BELLINGHAM

PLAN VIEW

INSPIRATION IMAGE NTS

1 1/2"

1/2"=1'

1 1/2"

TO MATCH CAMBRIA BELLINGHAM

WOOD TO MATCH DESIGNER SAMPLE

24 1/2"

26"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-308 DINING TABLE A AT LOBBY.DWG

20"

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

FRONT ELEVATION 1/2"=1'

DRAWING:

DINING TABLE A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-309

Project #:

18096

Item Description:

Coffee Table E @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Two Piece Nesting Table

Model Name: Dimensions:

Pair Table Nest Reffer to Notes

Finish:

Powder Coat Metal Legs with Black Ceramic Top

Notes:

-Low Nesting Table: 26.4"Dia x 9"H -High Nesting Table: 27.5"Dia x 13.7"H

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-309

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-309

Project #:

18096

Item Description:

Coffee Table E @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Instructions: 8 Specified item(s) to be installed per manufacturer's recommended guidelines. 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LBY-309

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-309

Project #:

18096

Item Description:

Coffee Table E @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 3

LBY-309

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-310

Project #:

18096

Item Description:

Counter Height Table B @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-310

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Counter Height Communal Table w/ Integrated Power and Lighting

Model Name: Dimensions: Width:

Custom Counter Height Table Refer to Attached Drawing 12"

Depth: Height: Finish:

36" Refer to Attached Drawing

Top Mat'l/Finish: Base Mat'l/Finish:

Daltile- Porcelain- CM10 Vickery Taupe Walnut Wood to Match Designer Sample

Notes:

-Refer to Spec LT-23 For Lighting Specification -Mfr. To Provide Power Outlets

36"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-310

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-310

Project #:

18096

Item Description:

Counter Height Table B @ Lobby

Area Name:

Lobby

Drawing #:

LBY-310

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LBY-310

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-310

Project #:

18096

Item Description:

Counter Height Table B @ Lobby

Area Name:

Lobby

Drawing #:

LBY-310

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LBY-310

120" 60"

30"

DALTILE, PORCELAIN CM10, VICKERY TAUPE

30"

36"

18"

CL 30"

12"

30"

12"

84"

LBY-402 LINEAR TASK LIGHT

MOCKETT PC551A/UI

GROUND CONTROL DIMMER KNOB

PLAN VIEW

24"

WOOD TO MATCH DESIGNER SAMPLE

LBY-402 LINEAR TASK LIGHT

1 1 3 4" 4" 4"

DALTILE PORCELAIN CM10, VICKERY TAUPE

3/8" = 1'

WOOD TO MATCH DESIGNER SAMPLE POWER INTEGRATED THROUGH TABLE LEGS 1"

18"

FRONT ELEVATION

19"

3/8" = 1'

LBY-402 LINEAR TASK LIGHT

22"

WOOD TO MATCH DESIGNER SAMPLE

31"

34"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-311 COUNTER HEIGHT TABLE B AT LOBBY.DWG

5 1/8"

SIDE ELEVATION

3/8" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

INSPIRATION IMAGE NTS

DRAWING:

COUNTER HEIGHT TABLE B AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-311

Project #:

18096

Item Description:

Side Table C @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

Arteriors

Source:

Arteriors

Address:

1745 Hayden Dr, Suite 100 Carrollton TX 75006800# : (877) 488-8866 (972) 488-9800

Address:

N/A

Phone:

(773) 218-3187

Phone: Fax:

Fax:

Contact:

N/A

Contact:

Rose Riggio @ Updates Group

E-mail: Web:

hd@arteriorscontract.com www.arteriorscontract.com

E-mail: Web:

updatesgroup@att.net www.arteriorshome.com/contract

Description:

Wood Accent Table

Model Number:

2589

Model Name:

Darby Accent Table

Width:

18"

Depth: Height:

18" 25" Dark Walnut

Finish:

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-311

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-311

Project #:

18096

Item Description:

Side Table C @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Arteriors

Source:

Arteriors

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LBY-311

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-311

Project #:

18096

Item Description:

Side Table C @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Arteriors

Source:

Arteriors

Page 3

LBY-311

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-401

Project #:

18096

Item Description:

Floor Lamp A @ Lobby

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

8 ea

Manufacturer:

Arteriors

Source:

Arteriors

Address:

1745 Hayden Dr, Suite 100 Carrollton TX 75006800# : (877) 488-8866 (972) 488-9800

Address:

N/A

Phone:

(773) 218-3187

Phone: Fax:

Fax:

Contact:

N/A

Contact:

Rose Riggio @ Updates Group

E-mail: Web:

hd@arteriorscontract.com www.arteriorscontract.com

E-mail: Web:

updatesgroup@att.net www.arteriorshome.com/contract

Description:

Black Finish Floor Lamp

Model Number:

79661

Model Name:

Stefan Floor Torchiere

Width:

13.5"

Height:

70"

Top Mat'l/Finish:

Vintage Silver Rods

Base Mat'l/Finish:

Triangular Black Marble Base

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-401

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-401

Project #:

18096

Item Description:

Floor Lamp A @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

8 ea

Manufacturer:

Arteriors

Source:

Arteriors

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LBY-401

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-401

Project #:

18096

Item Description:

Floor Lamp A @ Lobby

Area Name:

Lobby

Issue Date: Item Quantity:

8 ea

Manufacturer:

Arteriors

Source:

Arteriors

Page 3

LBY-401

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-402

Project #:

18096

Item Description:

Task Light @ Communal Table B

Area Name:

Lobby

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

Juniper Design

Source:

Juniper Design

Address:

68 33rd Street, 3rd Floor (Unit 11) Brooklyn, New York 11232 New York NY 11232(347) 799-2915

Address:

68 33rd Street, 3rd Floor (Unit 11) Brooklyn, New York New York NY 11232 (347) 799-2915

Phone: Fax: Contact: E-mail: Web:

Phone: Fax: Contact: E-mail:

info@juniper-design.com http://www.juniper-design.com/

Web:

info@juniper-design.com http://www.juniper-design.com/

Description:

Linear Task Light

Model Name: Dimensions:

Thin Sharded Task Lamp- Three Connected Sections Individual: 24"L x 19"H, Overall: 72"L x 19"H

6385826

Finish:

Satin Nickel

Switch Type:

Ground Control Knob

Cord Length: Cord Color: Lamp Type:

Notes

Lamp Wattage: Lamp Quantity: UL Listing: Shade/Diffuser Style:

Clear 3000K Mftr. To Recommend 3 Damp Location Rated Frosted Bulb

Mounting Instructions:

Mounted to Communal Table Raised Surface

Dimmer:

Yes

Notes:

- Cord Length: To be Field Verified - 600 lm delivered / 8.0W

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-402

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-402

Project #:

18096

Item Description:

Task Light @ Communal Table B

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Juniper Design

Source:

Juniper Design

Instructions: 6 All goods must be inspected prior to shipping and properly packaged to ensure their protection from damage, soiling, and infestation during shipping and handling. 7 Specified item(s) must meet current Brand/Owner standards of Architecture and Design. 8 Specified item(s) to be installed per manufacturer's recommended guidelines. 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Fixture must be UL listed with UL label affixed to each fixture and meet all applicable local codes. Manufacturer to verify all required codes. 15 Fixture volts to be 120 for USA use or manufacturer recommended voltage. 16 Manufacturer to ensure all fixture materials are non-corrosive. All metal parts, joints and connectors to be free from burrs, sharp corners/edges. All surface coatings to be free of defects. 17 Manufacturer to ensure structural stability of fixture. 18 For portable/plug-in fixtures, GC and/or Owner to provide bulb/lamping per Owner/Brand standards. 19 For hardwired fixtures, manufacturer to provide and/or recommend bulb/lamping. 20 Manufacturer to verify and provide appropriate plug type per installation site requirements. 21 All hardwired fixtures to be installed by GC. 22 Manufacturer to ensure that all frames and other internal access shall be arranged so as to permit re-lamping without use of tools. 23 Manufacturer to ensure that all shades, diffusers and lenses are attached so as to maintain straight and level positioning when installed. 24 Manufacturer to provide weight information of fixture to GC to allow for appropriate structural blocking where applicable. 25 Manufacturer to provide felt base cover (to match lamp base color) for table lamps. 26 Manufacturer to provide a self-leveling base for floor lamps, weighted as required to avoid tipping. 27 All switching devices on portable fixtures to be accessible-compliant rocker switches unless noted otherwise. 28 All sconces to be ADA compliant unless the fixture is located above a counter, table, etc. Manufacturer to verify location of fixture with Gettys Group prior to fabrication. 29 Manufacturer to ensure shades to be of sufficient size and provide proper distance from bulb/lamping to avoid discoloration and hot spots from bulb/lamping. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 Manufacturer to provide mounting template for sconces to Gettys Group and/or Purchasing Agent for installation coordination where applicable.

Page 2

LBY-402

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-402

Project #:

18096

Item Description:

Task Light @ Communal Table B

Area Name:

Lobby

Issue Date: Item Quantity:

1 ea

Manufacturer:

Juniper Design

Source:

Juniper Design

Instructions: 32 Fixture to be UL listed for damp location where applicable. Manufacturer to verify location of fixture with Gettys Group prior to fabrication. 33 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable.

Page 3

LBY-402

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-801

Project #:

18096

Item Description:

Planter A @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-801

Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name: Description:

Custom Clear Resin Planter Clear Resin Planter with Oil Rubbed Bronze Finish

Dimensions:

18"H x 18"L x 18"W

Color/Finish:

Clear Resin Finish or Alternate Finish, Oil Rubbed Bronze to Match Designer Sample

Notes:

-Nylon Gliders to be Attached -Image for concept only

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-801

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-801

Project #:

18096

Item Description:

Planter A @ Lobby

Area Name:

Lobby

Drawing #:

LBY-801

Issue Date: Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-801

1" 18"

18" CLEAR RESIN OR ALTERNATE FINISH

PLAN VIEW

3/4"=1'

16"

INSPIRATION IMAGE NTS

18"

CLEAR RESIN OR ALTERNATE FINISH

1" 3"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-801 PLANTER A AT LOBBY.DWG

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

18"

NYLON GLIDERS

SIDE ELEVATION 3/4"=1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

PLANTER A AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-802

Project #:

18096

Item Description:

Planter B @ Lobby

Issue Date:

Area Name:

Lobby

Revision(s):

Drawing #:

LBY-802

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name: Description:

Custom Clear Resin Rectangular Planter Clear Resin Planter with Oil Rubbed Bronze Finish

Dimensions:

18"H x 82"L x 34"W

Color/Finish:

Clear Finish Resin or Alternate Finish, Oil Rubbed Bronze to Match Designer Sample

Notes:

- Nylon Gliders to Be Attached - Image for Concept Only

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LBY-802

Project Name:

Westin Lombard Yorktown Center

Item Number:

LBY-802

Project #:

18096

Item Description:

Planter B @ Lobby

Area Name:

Lobby

Drawing #:

LBY-802

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

LBY-802

34"

82"

CLEAR RESIN OR ATLTERNATE FINISH

PLAN VIEW

1/2"=1'

CLEAR RESIN OR ALTERNATE FINISH

INSPIRATION IMAGE NTS

CLEAR RESIN OR ALTERNATE FINISH

80"

32" OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

1" 3"

18"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LBY-802 PLANTER B AT LOBBY.DWG

NYLON GLIDERS

FRONT ELEVATION

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

1/2"=1'

DRAWING:

PLANTER B AT LOBBY

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

SIDE ELEVATION 1/2"=1'

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-201

Project #:

18096

Item Description:

Counter Stool A @ Club Lounge

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

13 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Tapered Leg Counter Stool

Model Name: Material/Finish:

Carmen Stool Medium Walnut

Width: Depth: Height:

18.5" 23.4" 39.4"

Seat Height:

29.5"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Tight, Fully Upholstered Tight, Fully Upholstered Poly Dacron Wrapped Upholstery: LNG-201.1; JF Fabrics; Pattern: Prism; 32S8221; 100% Polyester; Repeat: .25" Vertical x .25" Horizontal; Width: 54"; Fire Rating: Cal/TB 117, NFPA 260, UFAC; Durability: 51,000 Double Rubs

Notes:

-Counter Stool to Have Nylon Carpet Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-201

Project #:

18096

Item Description:

Counter Stool A @ Club Lounge

Area Name:

Club Lounge

Issue Date: Item Quantity:

13 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 2

LNG-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-201.1

Project #:

18096

Item Description:

Fabric @ Counter Stool A

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

JF Fabrics

Source:

JF Fabrics

Address:

600 Main Street Box 888 Tonawanda NY 14151(800) 461-1349 (905) 624-8021

Address:

600 Main Street Box 888 Tonawanda NY 14151(800) 461-1349 (905) 624-8021

Phone: Fax:

Contact: E-mail:

Web:

Description:

Upholstery at Counter Stool

Pattern Name: Color: Width:

Prism 32S8221

Repeat: Content:

54" .25" Vertical x .25" Horizontal

Durability:

100% Polyester 51,000 Double Rubs

Fire Rating:

Cal/TB 117, NFPA 260, UFAC

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-201.1

Project #:

18096

Item Description:

Fabric @ Counter Stool A

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

JF Fabrics

Source:

JF Fabrics

Page 2

LNG-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-202

Project #:

18096

Item Description:

Dining Chair @ Club Lounge

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

4 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Upholstered Side Chair

Model Name: Material/Finish:

Adima Side Chair Medium Walnut

Width: Depth: Height:

20" 22.7" 36"

Seat Height:

18"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Tight, Fully Upholstered Tight, Fully Upholstered Poly Dacron Wrapped Outside Back of Chair: LNG-202.1; DL Couch; Pattern: UHN-VG-10; Vega; Silent Sands; Vinyl Face, Polyester Back; ; Width: 54"; Fire Rating: Cal TB 117-2013: UFAC/NFPA 260: Class I/ ASTM E84 Class A; Durability: 100,000 Double Rubs; Inside Back and Seat: LNG-202.2; Majilite; Pattern: J1LCV; Peal Finesse; Platinum; Nylon Fiber Matrix; ; Width: 54"; Fire Rating: ASTM 84, UFAC/NFPA 2601989; Durability: 100,000 Double Rubs

Notes:

-Chair to Have Nylon Carpet Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Page 1

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

LNG-202

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-202.1

Project #:

18096

Item Description:

Fabric @ Dining Chair A Outside

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Address:

499 E. County Rd. 300 S. P.O. Box 570 New Castle IN 47362(800) 433-0790 (800) 882-6824

Address:

444 North Orleans, Suite 350 Chicago IL 60610-

Phone: Fax:

(800) 433-0790 (800) 882-6824

N/A dlcouch@dlcouch.com www.dlcouch.com

Contact: E-mail:

Mollie Burdette mburdette@dlcouch.com www.dlcouch.com

Phone: Fax: Contact: E-mail: Web:

Web:

Description:

Vinyl Uphostery at Outisde Back of Chair

Pattern Number:

UHN-VG-10 Vega

Pattern Name: Color: Width: Content: Durability: Fire Rating:

Mobile: (773) 426-8241

Silent Sands 54" Vinyl Face, Polyester Back 100,000 Double Rubs Cal TB 117-2013: UFAC/NFPA 260: Class I/ ASTM E84 Class A

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-202.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-202.1

Project #:

18096

Item Description:

Fabric @ Dining Chair A Outside

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Page 2

LNG-202.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-202.2

Project #:

18096

Item Description:

Fabric @ Dining Chair A Inside

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Address:

1530 Broadway Road Dracut MA 01826(978) 441-6800

Address:

245 E. 40th St. New York NY 10016(802) 238-2868

Fax:

(978) 441-0835

Fax:

Contact:

N/A

Contact:

Kathleen Buchan

E-mail: Web:

sales@majilite.com www.majilite.com

E-mail: Web:

buchan@stowevt.net http://www.majilite.com/

Phone:

Description:

Vinyl Upholstery

Pattern Number:

J1LCV

Pattern Name: Color: Width:

Peal Finesse Platinum

Content: Durability:

Nylon Fiber Matrix 100,000 Double Rubs

Fire Rating:

ASTM 84, UFAC/NFPA 260-1989

54"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-202.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-202.2

Project #:

18096

Item Description:

Fabric @ Dining Chair A Inside

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Page 2

LNG-202.2

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203

Project #:

18096

Item Description:

Lounge Chair A @ Club Room

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

4 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Stanted Side Lounge Chair

Model Name: Material/Finish:

Delano Lounge Chair Medium Walnut

Width: Depth: Height: Arm Height: Seat Height:

28" 29.5" 25.6" 22" 17"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Tight, Fully Upholstered Attached w/ Concealed D-Clips Poly Dacron Wrapped Chair Upholstery: LNG-203.1; Valley Forge Fabrics, Inc.; Pattern: VY35-29; Mascot; Raven; 100% PVC; ; Width: 54" Double Rubs; Backing: 100 % Polyester; Fire Rating: Cal-117; Durability: 60,000 Double Rubs

Notes:

-Lounge Chair to have Nylon Carpet Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-203

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203

Project #:

18096

Item Description:

Lounge Chair A @ Club Room

Area Name:

Club Lounge

Issue Date: Item Quantity:

4 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 2

LNG-203

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair A

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Valley Forge Fabrics, Inc.

Source:

Valley Forge - CHI

Address:

1650 W. McNab Road Ft. Lauderdale FL 33309(954) 401-6620

Address:

1650 West McNab Road Fort Lauderdale FL 33069- United States

Phone:

Fax:

Mobile: (954) 401-6620

Contact:

Allie Dobin

Contact:

Allie Dobin

E-mail: Web:

adobin@valleyforge.com www.valleyforge.com

E-mail: Web:

adobin@valleyforge.com www.valleyforge.com

Description:

Vinyl Upholstery

Pattern Number:

VY35-29

Pattern Name: Color: Width:

Mascot Raven

Content:

100% PVC 60,000 Double Rubs

Durability: Fire Rating: Backing:

54" Double Rubs

Cal-117 100 % Polyester

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-203.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair A

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

Valley Forge Fabrics, Inc.

Source:

Valley Forge - CHI

Page 2

LNG-203.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203A

Project #:

18096

Item Description:

Pillow @ Lounge Chair A

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

4 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Westing Standard Throw Pillow

Dimensions:

18"H x 18"W

COM/COL:

Pillow Shape:

LNG-203A.1; Kravet Inc.; Pattern: 34788-6; Stepping Stones; Mink; 92% Viscose, 8% Polyester; Repeat: 13 5/8" Vertical x 13 1/2" Horizontal; Width: 54"; Backing: Acrylic Backed; Fire Rating: CATB 117; Durability: 30,000 Double Rubs Sqaure

Pillow Edge Detail:

Knife Edge

Pillow Fill:

100% Polyester

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Page 1

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

LNG-203A

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203A.1

Project #:

18096

Item Description:

Pillow Fabric @ Lounge Chair A

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Kravet Inc.

Source:

Kravet - CHI

Address:

225 Central Avenue South Bethpage NY 11714(516) 293-2000

Address:

222 Merchandise Mart Plaza, Suite 6-128 Chicago IL 60654- United States (312) 925-8860

Fax:

(516) 293-3737

Fax:

Contact:

N/A

Contact:

Shelly Bress

E-mail: Web:

N/A www.kravet.com

E-mail: Web:

devarybest@aol.com

Phone:

Description:

Velvet Pillow Fabric

Pattern Number:

34788-6

Pattern Name: Color: Width:

Stepping Stones Mink

Repeat: Content:

13 5/8" Vertical x 13 1/2" Horizontal 92% Viscose, 8% Polyester 30,000 Double Rubs

Durability:

54"

Fire Rating:

CATB 117

Backing:

Acrylic Backed

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-203A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-203A.1

Project #:

18096

Item Description:

Pillow Fabric @ Lounge Chair A

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

Kravet Inc.

Source:

Kravet - CHI

Page 2

LNG-203A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-204

Project #:

18096

Item Description:

Ottoman A @ Club Room

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Lee Industries

Source:

Address:

210 4th Street SW Concover NC 28613(800) 892-7150

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Lee Industries

E-mail: Web:

www.leeindustries.com

Description:

Upholstered Ottoman

Model Name: Material/Finish:

Ottoman Walnut to Match Designer Sample

Width: Depth: Height:

23" 18" 17"

Seat Height:

17"

COM/COL:

Upholstery: LNG-204.1; DL Couch; Pattern: UHMGD-11; Grandeur; Dijon; 80 % Polyester, 20% Nylon; Repeat: 27.25" Vertical x 27.5" Horizontal; Width: 52.5"; Backing: Acrylic Backing; Fire Rating: Cal TB 117-2013, UFAC/NFPA 260: Class 1; Durability: 100,000 Double Rubs

Notes:

-Ottoman to Have Nylon Carpet Glides Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-204

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-204

Project #:

18096

Item Description:

Ottoman A @ Club Room

Area Name:

Club Lounge

Issue Date: Item Quantity:

2 ea

Manufacturer:

Lee Industries

Source:

Lee Industries

Page 2

LNG-204

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-204.1

Project #:

18096

Item Description:

Fabric @ Ottoman A

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Address:

499 E. County Rd. 300 S. P.O. Box 570 New Castle IN 47362(800) 433-0790 (800) 882-6824

Address:

444 North Orleans, Suite 350 Chicago IL 60610-

Phone: Fax:

(800) 433-0790 (800) 882-6824

N/A dlcouch@dlcouch.com www.dlcouch.com

Contact: E-mail:

Mollie Burdette mburdette@dlcouch.com www.dlcouch.com

Phone: Fax: Contact: E-mail: Web:

Web:

Description:

Upholstery Fabric at Seat Cushion

Pattern Number:

UHM-GD-11 Grandeur

Pattern Name: Color: Width:

Mobile: (773) 426-8241

Dijon 52.5"

Repeat: Content: Durability:

27.25" Vertical x 27.5" Horizontal

Fire Rating: Backing:

Cal TB 117-2013, UFAC/NFPA 260: Class 1

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

80 % Polyester, 20% Nylon 100,000 Double Rubs Acrylic Backing

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-204.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-204.1

Project #:

18096

Item Description:

Fabric @ Ottoman A

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

DL Couch

Source:

DL Couch

Page 2

LNG-204.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-205

Project #:

18096

Item Description:

Lounge Chair B @ Club Room

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Address:

204, The Hall, 4 New Street Salisbury SP1 2PH England

Address:

Phone:

+44(0)1722 658 008

Phone:

Barnack Industrial Centre, Wilton, Salysbury, Wiltshire, SP2 0AW UK 07805 677 705

Fax:

Contact: E-mail:

Web:

info@jarrettfurniture.co.uk www.jarrettfurniture.co.uk

Web:

Melissa Jarrett melissa@jarrettfurniture.co.uk jarrettfurniture.com

Description:

Upholstered Curved Lounge Chair

Model Name: Material/Finish: Dimensions: Width: Depth: Height:

Duroc Lounge Chair Medium Walnut Wood Finish Width at Base Back: 17.3" 30.3" 28.4" 27.5"

Seat Height: Seat Depth:

15.8" 21.2"

COM/COL:

Upholstery: LNG-205.1; Integra Fabrics; Pattern: Chimney; Pebbles; 80% Polyester, 20% Acrylic; ; Width: 54"; Railroad: Yes; Fire Rating: Cal 117 & UFAC Class 1; Durability: 51,000 Double Rubs

Notes:

-To Have Nylon Carpet Glides

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-205

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-205

Project #:

18096

Item Description:

Lounge Chair B @ Club Room

Area Name:

Club Lounge

Issue Date: Item Quantity:

2 ea

Manufacturer:

Jarrett Furniture Ltd.

Source:

Jarrett Furniture Ltd.

Page 2

LNG-205

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-205.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair B

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Integra Fabrics

Source:

Address:

3650 Ralph Ellis Boulevard Loris SC 29569(843) 756-4700

Address:

Fax:

(843) 756-4702

Fax:

Contact:

N/A

Contact:

Ashley P. Smith

E-mail: Web:

N/A www.integrafabrics.com

E-mail: Web:

ashley.smith@integrafabrics.com www.integrafabrics.com

Phone:

Description:

Upholstery Fabric

Pattern Name:

Chimney Pebbles

Color: Width: Content: Durability:

Phone:

Integra Fabrics

(843) 756-4700 Mobile: (843) 467-8514

54" 80% Polyester, 20% Acrylic 51,000 Double Rubs

Railroad: Fire Rating:

Yes

Soil/Stain Treatment:

To Be Finished With Contract Grade Stain Repellent

Cal 117 & UFAC Class 1

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-205.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-205.1

Project #:

18096

Item Description:

Fabric @ Lounge Chair B

Area Name:

Club Lounge

Issue Date: Item Quantity:

Manufacturer:

Integra Fabrics

Source:

Integra Fabrics

Page 2

LNG-205.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-301

Project #:

18096

Item Description:

Bar Height Table @ Club Lounge

Issue Date:

Area Name:

Club Lounge

Revision(s):

Drawing #:

LNG-301

Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Bar Height Table with Pedestal Base

Model Name: Dimensions: Width:

Custom Bar Height Table Refer to Attached Drawing 30"

Depth: Height: Finish:

42" Refer to Attached Drawing

Top Mat'l/Finish: Base Mat'l/Finish: Edge Detail:

Walnut Wood to Match Designer Sample Oil Rubbed Bronze Metal (Plated) Eased Edges

Notes:

- Table to Have Nylon Carpet Adjustable Levelers -Image for Concept Only

30"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-301

Project #:

18096

Item Description:

Bar Height Table @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-301

Issue Date: Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LNG-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-301

Project #:

18096

Item Description:

Bar Height Table @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-301

Issue Date: Item Quantity:

3 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LNG-301

30"

WALNUT WOOD FINISH TO MATCH DESIGNER SAMPLE

PLAN VIEW

1/2"=1'

2" 38"

42"

INSPIRATION IMAGE NTS

WALNUT WOOD FINISH TO MATCH DESIGNER SAMPLE EASED EDGES

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

24"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LNG-301 STANDING TABLE A AT CLUB LOUNGE.DWG

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

FRONT ELEVATION

NYLON ADJUSTABLE LEVELERS

1/2"=1'

DRAWING:

STANDING TABLE A AT CLUB LOUNGE

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-302

Project #:

18096

Item Description:

Dining Table @ Club Lounge

Issue Date:

Area Name:

Club Lounge

Revision(s):

Drawing #:

LNG-302

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Description:

Dining Table with Four Leg Base

Model Name: Dimensions: Width:

Custom Dining Table Refer to Attached Drawing 60"

Depth: Height: Finish:

31" Refer to Attached Drawing

Top Mat'l/Finish: Base Mat'l/Finish: Edge Detail:

Walnut Wood to Match Designer Sample Oil Rubbed Bronze Metal (Plated) Eased Edges

Notes:

- Table to Have Nylon Adjustable Glides - Image for Concept Use Only

To Bid

36"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-302

Project #:

18096

Item Description:

Dining Table @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-302

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LNG-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-302

Project #:

18096

Item Description:

Dining Table @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-302

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LNG-302

60"

36"

WALNUT WOOD FINISH TO MATCH DESIGNER SAMPLE

3" 1"

PLAN VIEW

1/2" = 1'

INSPIRATION IMAGE NTS

EASED EDGES

WALNUT WOOD FINISH TO MATCH DESIGNER SAMPLE

31"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LNG-302 DINING TABLE A AT CLUB LOUNGE.DWG

54"

FRONT ELEVATION

1/2" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE NYLON ADJUSTABLE LEVELERS

SIDE ELEVATION 1/2" = 1'

DRAWING:

DINING TABLE A AT CLUB LOUNGE

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-303

Project #:

18096

Item Description:

Consol Table @ Club Lounge

Issue Date:

Area Name:

Club Lounge

Revision(s):

Drawing #:

LNG-303

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Description:

Wood Console Table with Waterfall Edge

Model Name: Dimensions: Width:

Custom Console Table Refer to Attached Drawing 78"

Depth: Height: Finish:

36" Natural Wood w/ Color Variation

Top Mat'l/Finish:

Clear Protective Sealant

Edge Detail:

Eased Edges

Notes:

- Table to Have Nylon Adjustable Levelers - Image for Concept Use Only

To Bid

15"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-303

Project #:

18096

Item Description:

Consol Table @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-303

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LNG-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-303

Project #:

18096

Item Description:

Consol Table @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-303

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LNG-303

15"

78"

NATURAL WOOD TO MATCH SAMPLE W/ CLEAR PROTECTIVE SEALANT

PLAN VIEW

1/2" = 1'

INSPIRATION IMAGE NTS

NATURAL WOOD TO MATCH SAMPLE W/ CLEAR PROTECTIVE SEALANT

25"

36"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LNG-303 CONSOL TABLE A AT CLUB LOUNGE.DWG

NYLON ADJUSTABLE LEVELERS

2 1/2"

FRONT ELEVATION

1/2" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

CONSOL TABLE A AT CLUB LOUNGE

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

SIDE ELEVATION 1/2" = 1'

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-304

Project #:

18096

Item Description:

Coffee Table A @ Club Lounge

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

1 ea

Manufacturer:

Made Goods

Source:

Made Goods

Address:

4700 Littlejohn St. Baldwin Park CA 91706(626) 333-1177

Address:

425 Flock Avenue Naperville IL 60565(630) 730-0481

Fax:

(626) 628-3115

Fax:

Contact:

N/A

Contact:

Sondra Walbert

E-mail: Web:

info@madegoods.com www.madegoods.com

E-mail: Web:

sondra@sondrawalbert.com https://www.sondrawalbert.com/

Phone:

Description:

Oval Coffee Table

Model Name:

Cara Oval Coffee Table

Width:

24" 48"

Depth: Height: Finish:

18"

Notes:

- Table to Have Nylon Adjustable Levelers

Sand Realistic Faux Shagreen, Antique Mirror

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-304

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-304

Project #:

18096

Item Description:

Coffee Table A @ Club Lounge

Area Name:

Club Lounge

Issue Date: Item Quantity:

1 ea

Manufacturer:

Made Goods

Source:

Made Goods

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LNG-304

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-304

Project #:

18096

Item Description:

Coffee Table A @ Club Lounge

Area Name:

Club Lounge

Issue Date: Item Quantity:

1 ea

Manufacturer:

Made Goods

Source:

Made Goods

Page 3

LNG-304

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-305

Project #:

18096

Item Description:

Side Table @ Club Lounge

Area Name:

Club Lounge

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Address:

4700 Littlejohn St. Baldwin Park CA 91706(626) 333-1177

Address:

425 Flock Avenue Naperville IL 60565(630) 730-0481

Fax:

(626) 628-3115

Fax:

Contact:

N/A

Contact:

Sondra Walbert

E-mail: Web:

info@madegoods.com www.madegoods.com

E-mail: Web:

sondra@sondrawalbert.com https://www.sondrawalbert.com/

Phone:

Description:

Round Side Table with Four Legs

Model Name:

Addison Large Side Table

Width:

24" 24"

Depth: Height: Finish:

24"

Notes:

- Table to Have Nylon Adjustable Glides

Aged Silver Iron

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-305

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-305

Project #:

18096

Item Description:

Side Table @ Club Lounge

Area Name:

Club Lounge

Issue Date: Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LNG-305

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-305

Project #:

18096

Item Description:

Side Table @ Club Lounge

Area Name:

Club Lounge

Issue Date: Item Quantity:

2 ea

Manufacturer:

Made Goods

Source:

Made Goods

Page 3

LNG-305

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-306

Project #:

18096

Item Description:

Coffee Table B @ Club Lounge

Issue Date:

Area Name:

Club Lounge

Revision(s):

Drawing #:

LNG-306

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Description:

Wood Cocktail Table

Model Name: Dimensions: Width:

Custom Coffee Table Refer to Attached Drawing 30"

Depth: Height: Finish:

26" Refer to Attached Drawing

Top Mat'l/Finish:

Walnut Wood to Match Designer Sample

Notes:

- Table to Have Nylon Adjustable Glides - Image for Concept Only

To Bid

30"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-306

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-306

Project #:

18096

Item Description:

Coffee Table B @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-306

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

LNG-306

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-306

Project #:

18096

Item Description:

Coffee Table B @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-306

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LNG-306

30"

WALNUT WOOD FINISH TO MATCH DESIGNER SAMPLE

PLAN VIEW 3/8"=1'

1" WALNUT WOOD FINISH TO MATCH DESIGNER SAMPLE

15"

75 26"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LNG-306 COFFEE TABLE B AT CLUB LOUNGE.DWG

1 1/2" 28 1/2"

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

NYLON ADJUSTABLE GLIDES

FRONT ELEVATION 3/8"=1'

DRAWING:

COFFEE TABLE B AT CLUB LOUNGE

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-307

Project #:

18096

Item Description:

Beverage Station @ Club Lounge

Issue Date:

Area Name:

Club Lounge

Revision(s):

Drawing #:

LNG-307

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Model Name: Dimensions: Width:

To Bid

Custom Beverage Station Refer to Attached Drawing 24"

Depth: Height: Finish:

68.5", 107" 36"

Top Mat'l/Finish:

Quartz: Caesar Stone 5133 Symphony Grey

Edge Detail:

Eased Edges

Hardware Style: Hardware Finish:

Functional Metal Pull Brushed Oil Rubbed Bronze 11 3/4" Length Overall

Hardware Size:

Laminate to Match Designer Sample

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

LNG-307

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-307

Project #:

18096

Item Description:

Beverage Station @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-307

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

LNG-307

Project Name:

Westin Lombard Yorktown Center

Item Number:

LNG-307

Project #:

18096

Item Description:

Beverage Station @ Club Lounge

Area Name:

Club Lounge

Drawing #:

LNG-307

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

LNG-307

24"

107"

68 1/2"

2" QUARTZ: CAESAR STONE 5133 SYMPHONY GREY

24"

PLAN VIEW

INSPIRATION IMAGE NTS

3/8"=1'

QUARTZ: CAESAR STONE 5133 SYMPHONY GREY

36" 32"

29"

PL-20

16"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LNG-307 BEVERAGE STATION AT CLUB LOUNGE.DWG

EASED EDGES

REJUVENATION- WEST SLOPE DRAWER PULL 4" FINISH: OIL-RUBBED BRONZE

FRONT ELEVATION QUARTZ: CAESAR STONE 5133 SYMPHONY GREY

3/8"=1'

EASED EDGES PL-20

SIDE ELEVATION 3/8"=1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

REJUVENATION- WEST SLOPE DRAWER PULL 4" FINISH: OIL-RUBBED BRONZE

DRAWING:

BEVERAGE STATION AT CLUB LOUNGE

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

IMAGE OF PULL HARDWARE NTS

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-201

Project #:

18096

Item Description:

Task Chair @ Board Room

Area Name:

Meeting Spaces

Issue Date:

Revision(s): Item Quantity:

12 ea

Manufacturer:

MTS Seating

Source:

MTS Seating

Address:

7100 Industrial Drive Temperance MI 48182-

Address:

Phone: Fax:

(734) 847-3875 (800) 329-0687

Phone: Fax:

212 S. Marion Street Suite 27 Oak Park IL 60302(312) 771-5977

Contact: E-mail:

N/A N/A www.mtsseating.com

Contact: E-mail:

Web:

Description:

Upholstered Task Chair With Casters

Model Number: Model Name: Material/Finish: Width: Depth: Height: Arm Height: Seat Height:

36UBPFAPB 36 Series

COM/COL:

Andrea Sims @ Contract Alliance asims@contractalliance.com www.contractalliance.com

27" 38 1/2" 47 1/2" 9 1/2" Above Seat Range: 16 3/4" - 21 1/4" Chair Upholstery: MTG-201.1; Majilite; Pattern: JXBBE1V; Nuance; Fawn; Nylon Fiber Matrix; ; Width: 54"; Fire Rating: Cal 117- Section E; Durability: 100,000 Double Rubs

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

MTG-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-201

Project #:

18096

Item Description:

Task Chair @ Board Room

Area Name:

Meeting Spaces

Issue Date: Item Quantity:

12 ea

Manufacturer:

MTS Seating

Source:

MTS Seating

Page 2

MTG-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-201.1

Project #:

18096

Item Description:

Fabric @ Task Chair

Area Name:

Meeting Spaces

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Address:

1530 Broadway Road Dracut MA 01826(978) 441-6800

Address:

245 E. 40th St. New York NY 10016(802) 238-2868

Fax:

(978) 441-0835

Fax:

Contact:

N/A

Contact:

Kathleen Buchan

E-mail: Web:

sales@majilite.com www.majilite.com

E-mail: Web:

buchan@stowevt.net http://www.majilite.com/

Phone:

Description:

Vinyl Upholstery

Pattern Number:

JXBBE1V

Pattern Name: Color: Width:

Nuance Fawn

Content: Durability:

Nylon Fiber Matrix 100,000 Double Rubs

Fire Rating:

Cal 117- Section E

54"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

MTG-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-201.1

Project #:

18096

Item Description:

Fabric @ Task Chair

Area Name:

Meeting Spaces

Issue Date: Item Quantity:

Manufacturer:

Majilite

Source:

Majilite

Page 2

MTG-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-301

Project #:

18096

Item Description:

Meeting Table @ Board Room

Issue Date:

Area Name:

Meeting Spaces

Revision(s):

Drawing #:

MTG-301

Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

Description:

Conference Room Table with Integrated Power

Model Name: Dimensions: Width:

Custom Wood Conference Table Refer to Attached Drawing 144"

Depth: Height: Finish:

31" Refer to Attached Drawing

Top Mat'l/Finish: Base Mat'l/Finish: Edge Detail:

Walnut Wood to Match Designer Sample Walnut Wood to Match Designer Sample Beveled Edge

Notes:

- Image for Concept Only - Mfr. To Provide Intergrated Power - Table to Have Nylon Adjustable Levelers

To Bid

48"

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

MTG-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-301

Project #:

18096

Item Description:

Meeting Table @ Board Room

Area Name:

Meeting Spaces

Drawing #:

MTG-301

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge.

Page 2

MTG-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-301

Project #:

18096

Item Description:

Meeting Table @ Board Room

Area Name:

Meeting Spaces

Drawing #:

MTG-301

Issue Date: Item Quantity:

1 ea

Manufacturer:

To Bid

Source:

To Bid

Page 3

MTG-301

168"

54"

30"

38"

48"

30"

BRUSHED NICKEL DOUBLE SIDED POWER: 2 OUTLETS, 2 USB, 1 DATA ON EACH SIDE PC536/2C/U1, SATIN ALUMINUM

PLAN VIEW 3/8"=1'

WALNUT WOOD TO MATCH DESIGNER SAMPLE

CL 54 1/4"

54 1/4"

29 1/2"

12"

WALNUT WOOD TO MATCH DESIGNER SAMPLE

FRONT ELEVATION

NYLON ADJUSTABLE LEVELERS

3/8"=1'

WALNUT WOOD TO MATCH DESIGNER SAMPLE

29"

31"

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\MTG-301 (1) MEETING TABLE A AT BOARD ROOM.DWG

29 1/2"

24"

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

SIDE ELEVATION 3/8"=1'

DRAWING:

MEETING TABLE A AT BOARD ROOM

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-302

Project #:

18096

Item Description:

Credenza @ Board Room

Issue Date:

Area Name:

Meeting Spaces

Revision(s):

Drawing #:

MTG-302

Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Description:

Wood Credenza with Locakable Storage Cabinets

Model Name: Dimensions: Width:

Custom Wood Credenza Refer to Attached Drawing 71"

Depth: Height: Finish:

36" Refer to Attached Drawing

Top Mat'l/Finish:

Walnut Wood to Match Designer Sample

Edge Detail: Hardware Style:

Eased Edges Functional Metal Pull

Hardware Finish: Hardware Size:

Brushed Nickel 11 3/4" Length Overall

Notes:

- Image for Concept Only - Nylon Gliders to be Attached

20"

Prepared By: ACR

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

MTG-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-302

Project #:

18096

Item Description:

Credenza @ Board Room

Area Name:

Meeting Spaces

Drawing #:

MTG-302

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

MTG-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

MTG-302

Project #:

18096

Item Description:

Credenza @ Board Room

Area Name:

Meeting Spaces

Drawing #:

MTG-302

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Instructions: 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation. 35 If table includes a top by others, template of table top must be sent from table manufacturer to ensure correct dimensions and alignment. 36 Stone Tops to be sealed per Manufacturer's recommendation.

Page 3

MTG-302

20"

72"

CLEAR GLASS TOP TO MATCH DESIGNER SAMPLE

PLAN VIEW

1/2" = 1'

IMAGE OF BAR PULL

INSPIRATION IMAGE NTS

CLEAR GLASS TOP TO MATCH DESIGNER SAMPLE

NTS

6 1/2"

WALNUT WOOD TO MATCH DESIGNER SAMPLE

37"

24"

ROCKY MOUNTAIN OLYMPUS CABINET PULL 4" FINISH: SILICON BRONZE DARK NYLON GLIDERS

J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\MTG-302 CREDENZA IN BOARD ROOM.DWG

68"

1 1/2"

FRONT ELEVATION

1/2" = 1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

CREDENZA IN BOARD ROOM

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

SIDE ELEVATION 1/2" = 1'

DRAWING NO:

84" 20 3/4"

20 3/4"

1/2"

20 3/4"

3 EQ

10 1/2"

BRUSHED BRONZE TO MATCH DESIGNER SAMPLE

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

2 3/4"=1'

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

20" J:\_2018\18096 - WESTIN LOMBARD YORKTOWN CENTER\INTERIOR DESIGN\3 DRAWINGS\1 PN\WESTIN LOMBARD YORKTOWN CENTER\SHEETS\GFX\LT-21 DECORATIVE PENDANT IN CLUB ROOM.DWG

PLAN VIEW

10 1/2"

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

BRUSHED BRONZE TO MATCH DESIGNER SAMPLE

FRONT ELEVATION 3/4"=1'

OIL RUBBED BRONZE TO MATCH DESIGNER SAMPLE

2 1/4"

BRUSHED BRONZE TO MATCH DESIGNER SAMPLE

SIDE ELEVATION

3/4"=1'

55 WEST WACKER DRIVE 4TH FLOOR CHICAGO, IL 60601 +1.312.836.1111 TEL WWW.GETTYS.COM

AMERICAS | ASIA PACIFIC | MIDDLE EAST

DRAWING:

DECORATIVE PENDANT IN CLUB ROOM

PROJECT:

18096 WESTIN LOMBARD YORKTOWN CENTER

ISSUE DATE: REV DATE:

----

DRAWN BY:

ACR

INSPIRATION IMAGE NTS

DRAWING NO:

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-201

Project #:

18096

Item Description:

Chaise Lounge Chair A @ Pool Deck 61

Area Name:

Pool Deck

Issue Date: Revision(s): Item Quantity:

21 ea

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Description:

Outdoor Chaise Lounge Chair

Model Number: Model Name: Material/Finish:

570470 Palm Coast Adjustable Chaise Lounge ChairStacking Aztec Bronze-81 Standard Finish

Width: Depth: Height:

24.5" 85" 12.25"

Seat Height:

12.25"

COM/COL:

Sling Fabric: POL-201.1; Woodard; Pattern: 29B; Putty; 75% PVC, 25% Polyester; ; Backing: 29 B; Fire Rating: Grade A

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-201

Project #:

18096

Item Description:

Chaise Lounge Chair A @ Pool Deck 63

Area Name:

Pool Deck

Issue Date: Item Quantity:

21 ea

Manufacturer:

Woodard

Source:

Woodard

Page 2

POL-201

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-201.1

Project #:

18096

Item Description:

Fabric @ Chaise Lounge Chair A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Description:

In-Line Sling Fabric

Pattern Number: Pattern Name:

29B Putty

Content:

75% PVC, 25% Polyester

Fire Rating:

Grade A 29 B

Backing:

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-201.1

Project #:

18096

Item Description:

Fabric @ Chaise Lounge Chair A

Area Name:

Pool Deck

Issue Date: Item Quantity:

Manufacturer:

Woodard

Source:

Woodard

Page 2

POL-201.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202

Project #:

18096

Item Description:

Sectional @ Pool Deck

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 lot

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Description:

2 Piece Sectional Sofa- Outdoor

Model Name: Material/Finish: Dimensions: Width: Depth: Height: Arm Height: Seat Height:

Salona Aztec Bronze- 81 Standard Finish Refer to Notes for Individual Dimensions 91.5" 77" 25.5" 25.75" 19"

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Box Cushion attached with concealed d-clips Box Cushion attached with concealed d-clips Outdoor Suitable- Mfr. To Recommend Upholstery: POL-202.1; Woodard; Pattern: W01; Scoop Dove Weather Tex; 100% Solution Dyed Acrylic; Repeat: Solid; Fire Rating: Grade C

Notes:

-Loveseat and Sofa to be Ganged Together w/ Concealed Hardware -R/L Chaise Dimentions: 63" W x 25.25" D x 25.5" H -LAF Love Seat Dimentions: 51.75" W x 28.5" D x 25.5" H

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Page 1

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

POL-202

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202.1

Project #:

18096

Item Description:

Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Description:

Outdoor Upholstery Fabric

Pattern Number:

W01 Scoop Dove Weather Tex

Pattern Name: Repeat: Content:

Solid 100% Solution Dyed Acrylic

Fire Rating:

Grade C

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202.1

Project #:

18096

Item Description:

Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

Manufacturer:

Woodard

Source:

Woodard

Page 2

POL-202.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202A

Project #:

18096

Item Description:

Pillow A @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Outdoor Throw Pillow

Dimensions:

20"H x 20"W

COM/COL:

Pillow Shape:

Upholstery: POL-202A.1; Mayer Fabrics; Pattern: 448-001; Milargo; Rose Quartz; 68% Acrylic, 32% Polyester; Repeat: 14.73" H x 14.2" V; Width: 54"; Railroad: Yes; Backing: Acrylic Latex; Finish: Liquid and Stain Repel; Fire Rating: Cal 117-2013, NFPA 260/UFCA Class 1; Durability: 100,000 DBR Square

Pillow Edge Detail:

Knife Edge

Pillow Fill:

Outdoor Suitable

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202A

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202A

Project #:

18096

Item Description:

Pillow A @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

POL-202A

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202A.1

Project #:

18096

Item Description:

Pillow A Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Mayer Fabrics

Source:

Address:

Phone:

321 South Alabama St Indianapolis IN 46204800# : (800) 428-4415 (317) 267-2626

Fax:

(317) 267-2629

Fax:

Contact: E-mail: Web:

www.mayerfabrics.com

Description:

Outdoor Upholstery

Pattern Number:

448-001

Pattern Name: Color: Width:

Milargo Rose Quartz

Repeat: Content:

14.73" H x 14.2" V 68% Acrylic, 32% Polyester 100,000 DBR

Durability: Railroad: Fire Rating: Backing: Finish: Soil/Stain Treatment:

Phone:

Mayer Fabrics - CHI

(312) 961-8546

Contact:

Bill Neketis

E-mail: Web:

bill@mayerfabrics.com

54"

Yes Cal 117-2013, NFPA 260/UFCA Class 1 Acrylic Latex Liquid and Stain Repel To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202A.1

Project #:

18096

Item Description:

Pillow A Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

Manufacturer:

Mayer Fabrics

Source:

Mayer Fabrics - CHI

Page 2

POL-202A.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202B

Project #:

18096

Item Description:

Pillow B @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Outdoor Throw Pillow

Dimensions:

20"H x 20"W

COM/COL:

Pillow Shape:

Upholstery: POL-202B.1; Mayer Fabrics; Pattern: 445-000; Acuco; Raisin; 65% Acrylic, 35% Sunbrella; Repeat: 7.1" H x 12.88" V; Width: 54"; Railroad: Yes; Backing: Acrylic Latex; Finish: Liquid and Stain Repel; Fire Rating: Cal 117-2013, NFPA 260/UFAC Class 1; Durability: 100,000 Double Rubs Sqaure

Pillow Edge Detail:

Knife Edge

Pillow Fill:

Outdoor Suitable

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202B

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202B

Project #:

18096

Item Description:

Pillow B @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

POL-202B

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202B.1

Project #:

18096

Item Description:

Pillow B Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Mayer Fabrics

Source:

Address:

Phone:

321 South Alabama St Indianapolis IN 46204800# : (800) 428-4415 (317) 267-2626

Fax:

(317) 267-2629

Fax:

Contact: E-mail: Web:

www.mayerfabrics.com

Description:

Outdoor Upholstery Fabric

Pattern Number:

445-000

Pattern Name: Color: Width:

Acuco Raisin

Repeat: Content:

7.1" H x 12.88" V 65% Acrylic, 35% Sunbrella 100,000 Double Rubs

Durability: Railroad: Fire Rating: Backing: Finish: Soil/Stain Treatment:

Phone:

Mayer Fabrics - CHI

(312) 961-8546

Contact:

Bill Neketis

E-mail: Web:

bill@mayerfabrics.com

54"

Yes Cal 117-2013, NFPA 260/UFAC Class 1 Acrylic Latex Liquid and Stain Repel To Be Finished with Contract Grade Stain Repellent

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202B.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202B.1

Project #:

18096

Item Description:

Pillow B Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

Manufacturer:

Mayer Fabrics

Source:

Mayer Fabrics - CHI

Page 2

POL-202B.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202C

Project #:

18096

Item Description:

Pillow C @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

Address:

Phone:

Fax:

Contact:

E-mail: Web:

To Bid

Model Name:

Outdoor Throw Pillow

Dimensions:

20"H x 20"W

COM/COL:

Pillow Shape:

Upholstery: POL-202C.1; Maxwell Fabrics; Pattern: Salty Dog; 845 Chocolate; 100 % Polyolefin; ; Width: 53/54"; Fire Rating: NFPA 260 Class 1 (UFAC) - CAL 117-2013; Durability: 100,000 Double Rubs Square

Pillow Edge Detail:

Knife Edge

Pillow Fill:

Outdoor Suitable

Pillow Closure Type:

Concealed Zipper to Match COM

Pillow Stitching:

To Match COM

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202C

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202C

Project #:

18096

Item Description:

Pillow C @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

To Bid

Source:

To Bid

Page 2

POL-202C

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202C.1

Project #:

18096

Item Description:

Pillow C Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Maxwell Fabrics

Source:

Address:

188 Victoria Drive Vancouver BC (604) 253-7744

Address:

Phone:

800# : (800) 663-1159

Phone:

Maxwell Fabrics

(847) 951-9787

Fax:

Contact:

Holli Caulfield

E-mail: Web:

hollicaulfield@comcast.net

E-mail: Web:

order@maxwellfabrics.com www.maxwellfabrics.com

Description:

Outdoor Upholstery Fabric

Pattern Name:

Salty Dog 845 Chocolate

Color: Width:

53/54"

Content: Durability:

100 % Polyolefin

Fire Rating:

NFPA 260 Class 1 (UFAC) - CAL 117-2013

Soil/Stain Treatment:

To Be Finished with Contract Grade Stain Repellent

100,000 Double Rubs

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-202C.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-202C.1

Project #:

18096

Item Description:

Pillow C Fabric @ Sectional A

Area Name:

Pool Deck

Issue Date: Item Quantity:

Manufacturer:

Maxwell Fabrics

Source:

Maxwell Fabrics

Page 2

POL-202C.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-203

Project #:

18096

Item Description:

Sectional B @ Pool Deck

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Web:

Description:

Love Seat Sectional Part

Model Number: Model Name:

3Z0774, 3Z0453 Salona LAF Chaise Sectional Unit, Salona RAF Sectional Love Seat Aztec Bronze- 81 Standard Finish Reffer to Spec 91.5" 77" 25.2" 25.75" 19"

Material/Finish: Dimensions: Width: Depth: Height: Arm Height: Seat Height:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Seat Cushion Style: Back Cushion Style: Cushion Content: COM/COL:

Box cushion attached with concealed d-clips Box Cushion attached with concealed d-clips Outdoor Suitable- Mfr. To Recommend Upholstery: POL-202.1; Woodard; Pattern: W01; Scoop Dove Weather Tex; 100% Solution Dyed Acrylic; Repeat: Solid; Fire Rating: Grade C

Notes:

- LAF Chaise Unit: 63"W x 25.25"D x 25.2"H - RAF Love Seat: 51.75"W x 28.5"D x 25.5"H

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-203

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-203

Project #:

18096

Item Description:

Sectional B @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

Woodard

Source:

Woodard

Page 2

POL-203

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-203

Project #:

18096

Item Description:

Sectional B @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

Woodard

Page 3

Source:

Woodard

POL-203

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-204

Project #:

18096

Item Description:

Dining Chair @ Pool Deck

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

32 ea

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Description:

Outdoor Dining Chair

Model Number: Model Name: Material/Finish:

570417 Palm Coast Dining Arm Chair- Stacking Aztec Bronze- 81 Standard Finish

Width: Depth: Height: Arm Height: Seat Height:

24" 27.75" 34.25" 24.5" 17"

COM/COL:

Upholstery: POL-204.1; Woodard; Pattern: 29B; Putty; 75% PVC, 25% Polyester; ; Fire Rating: Grade A

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-204

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-204

Project #:

18096

Item Description:

Dining Chair @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

32 ea

Manufacturer:

Woodard

Source:

Woodard

Page 2

POL-204

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-204.1

Project #:

18096

Item Description:

Fabric @ Dining Chair

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Description:

In-Line Sling Fabric- Outdoor

Pattern Number: Pattern Name:

29B Putty

Content:

75% PVC, 25% Polyester

Fire Rating:

Grade A

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-204.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-204.1

Project #:

18096

Item Description:

Fabric @ Dining Chair

Area Name:

Pool Deck

Issue Date: Item Quantity:

Manufacturer:

Woodard

Source:

Woodard

Page 2

POL-204.1

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-205

Project #:

18096

Item Description:

Shower Bench A @ Changing Rooms 61

Area Name:

Pool Deck

Issue Date: Revision(s): Item Quantity:

2 ea

Manufacturer:

Teak Works

Source:

Teak Works

Address:

156-B Galewski Drive Winona MN 55987800# : (866) 969-8325 (507) 452-1785

Address:

156-B Galewski Dr Winona MN 55987 (507) 452-1785

Fax:

(507) 858-0211

Fax:

(507) 858-0211

Contact:

Teak Works

Contact:

Teak Works

E-mail: Web:

customerservice@teakworks.com www.teakworks4u.com

E-mail: Web:

customerservice@teakworks.com www.teakworks4u.com

Phone:

Description:

Teak Shower Bench

Model Number: Model Name: Material/Finish:

PTB-251 4RBS Teak Deluxe Rigid Bench Plantation Teak

Width: Depth: Height:

25" 14" 18"

Seat Height:

18"

Phone:

800#: (866) 969-8352

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-205

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-205

Project #:

18096

Item Description:

Shower Bench A @ Changing Rooms 63

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

Teak Works

Source:

Teak Works

Page 2

POL-205

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-301

Project #:

18096

Item Description:

Side Table A @ Pool Deck

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

14 ea

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Description:

Aluminum Outdoor Side Table

Model Number:

3Z0439 Salona End Table- Clear Glass

Model Name: Width: Depth: Height: Finish:

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

20.3" 20.3" 20.5" Aztec Bronze- 81 Standard Finish, Clear Tempered Glass

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-301

Project #:

18096

Item Description:

Side Table A @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

14 ea

Manufacturer:

Woodard

Source:

Woodard

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

POL-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-301

Project #:

18096

Item Description:

Side Table A @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

14 ea

Manufacturer:

Woodard

Source:

Woodard

Page 3

POL-301

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-302

Project #:

18096

Item Description:

Coffee Table A @ Pool Deck

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Description:

Aluminum Outdoor Coffee Table

Model Number:

3Z0443 Salona Coffee Table- Clear Glass

Model Name: Width: Depth: Height: Finish:

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

20.8" 43.3" 18" Aztec Bronze 81- Standard Finish, Clear Tempered Glass

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-302

Project #:

18096

Item Description:

Coffee Table A @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

Woodard

Source:

Woodard

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

POL-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-302

Project #:

18096

Item Description:

Coffee Table A @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

Woodard

Source:

Woodard

Page 3

POL-302

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-303

Project #:

18096

Item Description:

Dining Table @ Pool Deck

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

8 ea

Manufacturer:

Woodard

Source:

Woodard

Address:

P.O. Box 1037 Coppell TX 75019-1037

Address:

212 S. Marion St. Suite 27 Oak Park IL 60302(312) 415-1272

Phone: Fax:

Contact: E-mail:

Web:

www.woodard-furniture.com

Web:

Jen Cal @ Contract Alliance jcal@contractalliance.com www.contractalliance.com

Description:

Aluminum 42" Outdoor Round Table

Model Number: Model Name:

6TM4842BT Aluminum Solid Top 42" Round Umbrella Table with Weighted Base

Width:

42"

Depth: Height:

42" 28.25" Aztec Bronze- 81 Standard Finish

Finish:

Notes:

-Umbrella Cap To Be Included -Table to have Outdoor Suitable Adjustable Levelers

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-303

Project #:

18096

Item Description:

Dining Table @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

8 ea

Manufacturer:

Woodard

Source:

Woodard

Instructions: 9 Manufacturer to coordinate all details of specified item(s) with Gettys Group prior to production. 10 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 11 Refer to finish plans, elevations, and details for additional information and item location(s). 12 Refer to attached image(s) and detail drawing(s) of specified item(s) for additional information. 13 Manufacturer to sidemark outside of shipping container with property name, item, number, PO number, spec number, and area as specified. 14 Manufacturer or vendor to provide rating certificates, care/maintenance instructions, and warranties as applies to Gettys Group, Owner/Property, and Purchasing Agent for record. 15 Manufacturer/Purchasing Agent to verify all required COM yardages prior to purchase of fabric(s). 16 Where applicable, manufacturer to procure all COM fabric(s) and inspect all COM fabric(s) upon delivery for defects or blemishes prior to fabrication. Manufacturer to report any defects of COM fabric(s) to Purchasing Agent. 17 Dimensions are approximate. Manufacturer to recommend appropriate dimensions based on style of piece. 18 All fabrication and materials must meet or exceed all applicable local fire codes. 19 All wood must comply with or exceed the American Wood Working Institute's custom grade quality standards and to be kiln dried with the moisture content not to exceed 7%. 20 Minimum frame construction to be hardwood frame, double doweled, glued and screwed with corner blocking, as appropriate, with concealed fasteners. 21 Manufacturer to guarantee structural stability of unit(s) and provide adequate bracing to reinforce against any unwanted movement for maximum stability. 22 All exposed surfaces to be free from dents, tool marks, warpage, buckle, glue, and open joints or other defects affecting appearance or serviceability. 23 Manufacturer to verify location, grain, and pattern direction of all veneers with Gettys Group prior to production. 24 Minimum finish to be solvent based wood stain and sealer with (2) coats of catalyzed lacquer. All exposed surfaces finished to match specified item. 25 Manufacturer to ensure all hardware components and fasteners are non-corrosive and appropriate for use in high humidity/salt climates, where applicable. 26 All materials must be mildew resistant. 27 Provide commercial quality nylon carpet glides where applicable, unless otherwise noted. 28 Provide commercial quality hard surface felt glides where applicable, unless otherwise noted. 29 Manufacturer to provide rust-proof furniture levelers on bottom of casegood to allow for on-site adjustments. 30 Manufacturer to provide all necessary hardware and instructions for a complete and finished on-site installation. 31 All drawers to have silent nylon ball bearing, full extension drawer glide construction, suitable for contract use, unless noted otherwise. 32 Drawer construction to be five-sided with wood interior to be finished to match exterior of unit, unless noted otherwise. 33 All glass to be tempered and edges to receive a pencil polished edge. 34 Manufacturer to ensure that table bases are able to support specified top size with no wobble. Manufacturer to provide all necessary hardware for securing table top to bases for a complete on-site installation.

Page 2

POL-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-303

Project #:

18096

Item Description:

Dining Table @ Pool Deck

Area Name:

Pool Deck

Issue Date: Item Quantity:

8 ea

Manufacturer:

Woodard

Source:

Woodard

Page 3

POL-303

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-801

Project #:

18096

Item Description:

Mirror @ Shower Room

Area Name:

Pool Deck

Issue Date:

Revision(s): Item Quantity:

2 ea

Manufacturer:

Mirror Image

Source:

Mirror Image - CHI

Address:

2937 Vail Avenue City of Commercy CA 90040(323) 869-0100

Address:

2937 Vail Avenue City of Commercy CA 90040(323) 869-0100

Phone:

Fax:

Contact:

Janet Fisher-Courtney

E-mail: Web:

janet@mirrorimage.com www.mirrorimage.com

E-mail: Web:

www.mirrorimage.com

Model Number: Model Name: Description:

20622 Iron- Modified from Running Line

Dimensions:

Stainless Steel mirror with non-beveled center mirror. Hang horizontally 26"W x 60"H (Modified)

Color/Finish:

Black Nickel

Required Item(s) for Designer Approval Prior to Fabrication: Seaming Diagram

Strike-Off

Finish Sample

Prepared By: ACR Cutting

Shop Dwgs

Prototype

Flame Certificate

Page 1

POL-801

Project Name:

Westin Lombard Yorktown Center

Item Number:

POL-801

Project #:

18096

Item Description:

Mirror @ Shower Room

Area Name:

Pool Deck

Issue Date: Item Quantity:

2 ea

Manufacturer:

Mirror Image

Source:

Mirror Image - CHI

Page 2

POL-801