EEWeb Pulse - Issue 86

EEWeb Issue 86

February 19, 2013

Kayvan Oboudiyat CEO, Altium

TECHNICAL ARTICLE

Managing Electronics Design Data

TECHNICAL ARTICLE

Microcontroller Security System

Electrical Engineering Community

eeweb.com

EEWeb PULSE

TABLE OF CONTENTS

Kayvan Oboudiyat

4

CEO OF ALTIUM A conversation with Altium’s CEO about the importance of device ecosystems and how their CAD devices are fitting in to the bigger picture.

Featured Products

11

Managing Electronics Design Data

12

BY ALTIUM A look at Altium’s smart, powerful tools for implementing and re-using high-integrity design data, without the risk.

20

Cheap, Smart, Tiny How TinyCircuits, a small startup based in Akron Ohio, is producing robust hardware in a small (tiny) package.

24

Microcontroller Security System

BY ROBERT RIEMEN How to create a basic home security system using the BASIC Stamp homework board.

30

RTZ - Return to Zero Comic

Visit www.eeweb.com

3

EEWeb PULSE

Kayvan

Oboud

4

EEWeb | Electrical Engineering Community

n

INTERVIEW

diyat Altium is a leading provider of electronic design tools for software and development hardware. Their unique design environment allows electronics designers to connect people with devices. We spoke with Kayvan Oboudiyat, CEO, as well as Aram Mirkazemi, CTO, about the importance of a device ecosystem, where Altium’s CAD devices are in this ecosystem and the vision for Altium for the coming years.

Visit www.eeweb.com

5

EEWeb PULSE Kayvan, could you tell us a little bit about your background before joining Altium?

Kayvan: I have degrees in electrical engineering and mathematics from Reading University, UK. The first part of my career was in telecommunications with a major telecom company based in Australia. In 1997, I joined, what was at the time Protel International, as the managing director, and worked with Nick Martin and Aram. I’ve been with the company since then, in different capacities. Between 1999 and 2003, I played a key role in the listing of the company, and I also managed a range of mergers and acquisitions for the company. These acquisitions led to the development and release of the Altium DXP platform and Altium Designer product line.

Could you tell us a little bit more about Altium as a company? How many people work there?

Last time I counted, we had just over 400 employees. We have direct offices in US, Germany, China, Australia, and a small office in the Ukraine. We also have a network of 45 re-sellers around the world, both in countries where we have direct presence and countries that are represented by re-sellers.

Since the listing of the company, we have been focused a mainly on development of technology, and the outcome of that effort was Altium DXP platform and Altium Designer.

About three years ago, we acquired a company called Morfik, which was founded by Aram. The reason behind this acquisition was to bring web technology into Altium, which we were lacking at the time. That was Altium’s first step, in a way, towards realization of our ecosystem

6

strategy. The second step after that acquisition was the relocation of our headquarters to China about 18 months ago. The third step was the change in leadership, which happened a couple of months ago.

What percent of the company’s efforts are spent on development versus all the other things the company requires?

In terms of product development and research, we have around 90 employees and around 60 component library developers.

Why don’t you tell us a little about your goal and vision for Altium?

The main vision of Altium— particularly over the recent years— has been to develop technologies and tools enabling design of ecosystem of devices, otherwise known as the Internet of Things by our customers. This is an objective that the company is committed to, and we have already taken a number of steps towards this objective.

Under the new paradigm we are aiming to provide the technologies, tools, and software required, to enable engineers to create their own ecosystems of devices. Altium will become the enabler of that ecosystem rather than trying to create a global ecosystem for others to join in. Of course, we are an engineering company—our core competency is board level design, and it is very important that we continue to deliver the latest board level design technology and tools to our customers.

What does the “device ecosystem” mean in Altium’s terminology?

Aram: Obviously, a device ecosystem is essentially centered

EEWeb | Electrical Engineering Community

around the evolution of the web and is a much bigger thing than Altium can actually make happen.

If you look at Web 1.0, it was about information, but with Web 2.0, the participants and the environment began interacting and exchanging information with one another. Web 2.0 was about people and their identity with the environment. Many organizations want this kind of ecosystems for their users. When you look today, ecosystems are so ubiquitous that you don’t even notice them—Amazon, Google, eBay, LinkedIn, to name a few. But what is emerging now that is recognized by many—the Intels of the world and the IBMs of the world—is Web 3.0, where smart devices are at the heart of it. With smart devices, the web and the physical world come together. Altium is not making it happen, people are making it happen by aligning themselves with it. That’s what we see the device ecosystem as, and we feel that a CAD company such as ourselves can play an important role in this.

How do your CAD tools contribute to the ecosystem of devices?

In the CAD world, we firmly believe that the CAD tools need to be in the forefront and center of that ecosystem to allow design processes to be part of the ecosystem. Bringing design processes into an ecosystem is much more demanding and much more involved than is the case in a typical content management ecosystem. We see CAD tools as needing to be right in there, in other words, the ecosystem would manifest itself through the CAD tools—in some ways like the music industry manifesting its songs and content through iTunes. We see CAD tools perform that same role.

A universal browser like Chrome

INTERVIEW or Firefox cannot actually bring the design process into ecosystems.

Do you think you will take your CAD tools and make them web apps eventually, or will just the app itself be tied to the Internet?

In the 90s, we developed what is now known as the DXP platform.

In those years, we referred to it as EDA/Client, a platform for tools integration. Even today, if you look at Altium, it has many tools in one environment, which is made possible by the DXP platform.

With the acquisition of Morfik, the

as a web app. The end user actually may not quite know whether it’s a native plug-in or whether it’s a web app, so you really could look at it like a specialized browser for engineering.

Kayvan: I would like to point to a couple of underpinning strategies for Altium’s new direction. The first strategy is openness. In the past, we had what we called a closed-system, which was applied to our platform, our relationship with the industry and forming partnerships. Closed system was actually necessary so that we could put our own platform

in the areas that are complimenting and expanding our reach to other key players in the industry, such as supply chain and components manufacturing. We also need to be open to form relationships with the investment community, so that we can, if needed in the future, to raise capital for mergers and acquisitions, which we believe is going to add another dimension our openness strategy. I also think that openness strategy needs to be applied within the organization, to empower our people to co-create solutions with our partners. We must open the doors so that others can come in to

“With smart devices, the web and the physical world come together.

Altium is not making it happen, people are making it happen by aligning themselves with it. That’s what we see the device ecosystem as, and we feel that a CAD company such as ourselves can play an important role in this.”

DXP platform has been extended to include the web as well as tools such as the PCB design, schematic capture, simulation router, and many more apps. Through Morfik, Altium has built a platform that allows the app to exist on the back-end server.

These apps then surface through the DXP front-end next to PCB and Schematic. So when you build an app for this new platform, it will actually fit right in next to your PCB and Schematic, but it will be served

and applications together. Altium is now moving to implement its strategy of openness—opening up our platform to the outside world so that our customers can develop their own applications that could work with other applications on our platform. We also need to make sure that openness strategy goes beyond the platform and establish a much closer relationships with our customers. We would like to be open to form strategic partnerships

create a real ecosystem that would be much bigger than what Altium may able to achieve on its own.

Could you give us an example of the types of partnerships you are talking about and how they might make the experience for the designer more valuable or effective?

Aram: An example that we have actually done quite a bit of work on, in terms of technology, is having what Visit www.eeweb.com

7

EEWeb PULSE

Altium’s Design Software we call supply chain intelligence. As you go through your design process, information about parts is actually there within the CAD and you can tell about the availability and cost.

Your bill of material is what we call a “live BOM,” so you can have a connection with a part supplier.

This is an example of strategic partnership with part suppliers.

Kayvan: Strategic partnership is something that we see as a necessary strategy going forward.

There are, of course, quite a large numbers of components and a few major suppliers Altium will be actively pursuing in order to form partnership with the key component suppliers. This isn’t something that will happen over a short period of time; it will be a strategy that we work towards in the short to medium term.

8

How many parts does Altium have for people who use the app?

Aram: Currently we have about 150,000 parts but hope to have 760,000 parts added throughout the next 2-3 years.

What are some of the features you expect us to see first over the next year?

We have been focusing on the DXP platform to include web and have a full professional development requirement for it. For the most part, it’s done and we should be rolling it out this year. As for the other developments, like supply chain intelligence, it’s been a big project that has been running for several years. We’ve reached a point where its roll out is imminent. We have also

EEWeb | Electrical Engineering Community

been putting a lot of effort in features that our customers have been asking for, like productivity features and we have set up a section of our website that we call “Ideas,” where users put ideas up, and Altium will develop them. We are going to put a lot of effort into that area as well.

The kind of things we’re thinking are multi-board systems (and the ability to work with them), which is one of the key areas that we can make some contribution towards by the virtue of the 3D capabilities that we have.

For more information about Altium, visit:

www.altium.com

INTERVIEW

Online Circuit Simulator PartSim includes a full SPICE simulation engine, web-based schematic capture tool, and a graphical waveform viewer.

Some Features include:

• Simulate in a standard Web Browser • AC/DC and Transient Simulations • Schematic Editor • WaveForm Viewer • Easily Share Simulations

Try-it Now! www.partsim.com

Factory Direct Transformers 18 Hour Express Delivery • Buy Online

Our transformers are 100% final tested for quality.

ZERO DEFECTS GUARANTEED DIRECT LINKS

Prem Magnetics, Inc. Johnsburg, IL 60051 USA Phone 1 (815) 385-2700 Fax 1 (815) 385-8578

Power Transformers Switchmode Transformers Inductors Audio & Telephony High Speed Data Transformers Economy Audio Line Matching Transformers Instrument & Current Transformers CRT Display Magnetics Accessories Visit www.eeweb.com

9

Technology You Can Trust

Avago Technologies Optocouplers

A Superior Technology for High Voltage Protection!

IEC 60747-5-5 Certified

Optocouplers are the only isolation devices that meet or exceed the IEC 60747-5-5 International Safety Standard for insulation and isolation. Stringent evaluation tests show Avago’s optocouplers deliver outstanding performance on essential safety and deliver exceptional High Voltage protection for your equipment. Alternative isolation technologies such as ADI’s magnetic or TI’s capacitive isolators do not deliver anywhere near the high voltage insulation protection or noise isolation capabilities that optocouplers deliver.

For more details on this subject, read our white paper at: www.avagoresponsecenter.com/672

FEATURED PRODUCTS Advanced AOI Inspection for Circuit Boards Nordson YESTECH, a subsidiary of Nordson Corporation, will feature the new high speed FX SL advanced AOI inspection system for populated printed circuit boards, at the annual APEX 2013 show. Held at the San Diego Convention Center, in San Diego, California from February 19th to the 21st, they will conduct live demonstrations in the booth of their complete line of AOI and AXI inspection systems. Nordson YESTECH’s FX SL AOI offers accelerated throughput at over twice the inspection speed of previous generation systems without compromising defect coverage or low false failure rates. For more information, click here.

TVS Diode Arrays for Surge Protection Littelfuse, Inc. has introduced the 450W SD05 (unidirectional) and SD05C (bidirectional) Series General-purpose TVS Diode Arrays (SPA® Devices), which are designed to replace multilayer varistors (MLVs) for protecting electronic equipment from damage due to electrostatic discharge (ESD) and other transient events. Unlike ceramic devices, which have an inherent wear-out factor, SD05 and SD05C Series devices are made of silicon diodes, which allows them to absorb repetitive ESD strikes or surge transients safely without performance degradation.

Typical applications of these devices include buttons/keypads, switches, DC power ports, and various other low-speed I/Os in pointof-sale terminals, test equipment or instrumentation, desktop/notebook computers, etc.. For more information, please click here.

High Temperature Range Capacitors Vishay Intertechnology, Inc. announced a new series of surface-mount aluminum capacitors that combines a high temperature range to + 150 °C with very low impedance, high ripple current, and long useful life. For increased processing flexibility, the Vishay BCcomponents 160 CLA devices meet the rigorous IPC/JEDEC J-STD-020 soldering guidelines for severe reflow conditions. The capacitors introduced today are available in six case sizes, ranging from 12.5 mm by 12.5 mm by 13 mm to the larger 18 mm by 18 mm by 21 mm. The capacitors offer capacitance from 100 µF to 3300 µF over a 16 V to 50 V voltage range.

For more information, please click here.

Burst-Mode Laser Transceiver The MAX24003 is a complete burst-mode laser driver transmitter and limiting amplifier receiver for use within fiber optic modules for FTTx applications. A fully compliant GEPON module with digital diagnostics can be realized when used with a 2KB EEPROM and suitable optics.

Alternatively, a microcontroller can be used in conjunction with the MAX24003; however, this is not a necessity to achieve SFF-8472 compliance. The 2.5Gbps limiting receive path features programmable output swing control, rate selection, and OMA-based loss of signal detection. The burst-mode laser driver has temperature compensated modulation control using a look-up table. For more information, please click here.

Visit www.eeweb.com

11

EEWeb PULSE

Managing Electronics Design Dat Smart, powerful tools for implementing and re-using high-integrity design data, without the risk.

12

EEWeb | Electrical Engineering Community

TECH ARTICLE

s ta

Visit www.eeweb.com

13

EEWeb PULSE As the process of developing electronic products has increased in complexity and involved more engineering domains, managing the huge array of design data that’s sourced and generated has become a crucial part of the task. Beyond the traditional notions of electronics design – developing hardware and software – engineers are spending an increasing amount of time sourcing, storing, reusing and releasing a wide variety of design data.

Maintaining the integrity of that design data across the entire product development process is an increasingly necessary part of today’s electronics design process, and its effectiveness can make the difference between commercial failure or success. This is largely about eliminating risk. The familiar risks are associated with introducing a new, unproven part into your design, but more importantly, there are risks associated with reusing existing design data. There are risks from the most basic design elements (such as component models) to high level blocks of functional circuitry and design output that is released to manufacturing.

Successfully managing risk and maintaining the integrity of existing design data will mean that a pool of proven design elements becomes available for new designs.

The elements, from components to complete design sections, have been used in fully-developed, debugged production designs and are therefore known, trusted entities that can be dropped into new designs with a high level of confidence in their integrity.

as a unique, traceable revision. Based on server t

from the design system’s own project data stora design environment itself.with Thethis content is stored i The low design risk associated approach aged as and able shared carries thereleased cumulativedesign benefitdata, of being to with au

progressively build up higher level design elements (for example, blocks of circuitry) from known, trusted From a such design reuse view means that elements as components or it sub-circuits.

Whenyou can successfully used(and in a production design, that models) higher components their constituent and t level design data can become the basis of even higher rity. You will know that an item is the latest revis level design elements. Each stage of increasing design releasedininto the vault, andis based you can see where it abstraction the reusable elements on proven, high-integrity sub elements. ‘where used’ capabilities built into the system.

With the right data management systems in place the By addressing the key with issues of datadesign integrity, the traditional risks associated meaningful reuse can even be vastly reduced, the task of taking reusing high level,and multi-layered design sect a design from concept to production will become tronics design process around Design for Reuse, easier, safer and faster. What’s needed is a design complete designs are released data management systemsections) and methodology that allowsto the va robust data integrity and design reuse to exist in harmony with innovation, design freedom and productivity.

With a Design for Reuse approach, reusing elem process, as opposed it beingscalable just anset adjunct o Altium Designer provides to a powerful, of tools and technologies for managing and updating the design methodology, where all design conte design data at all stages of the electronics development space toThis a managed, secure releasedesign vault. Subseq process. includes version-controlled repositories, a formal vault-based system forcreating storing verifie up from those released elements, revisions of all board-level design content and released confidence in its integrity. manufacturing data, the ability to manage the lifecycle of released (and reusable) content and components, cloud-based storage and live supply chain management for components and assemblies.

With Altium Designer, design content can be released from the design space into a secure storage vault as a unique, traceable revision.

14

EEWeb | Electrical Engineering Community

potential delays or errors.

technology, the managed vault system exists separately

age, but can be accessed easily and directly through the in a single location where it can be tracked and manuthorized members of your organization.

TECH ARTICLE

reuse stored design content such as blocks of circuitry, templates with full confidence in their data integsion, can be confident it hasn’t changed since it was t’s already used in other designs thanks to powerful

e approach avoids the design risks associated with tions. It opens the opportunity to structure the elecwhere all design elements (from component models to ault then reused accordingly.

ments becomes the essence of the electronic design or added design capability option. Vaults are central to ent is ultimately released from the fluid, creative design Design reuse – design manage and reuse be accessed easily and directly through the design quent, more complex content canexisting then be built design content environment itself. The content is stored in a single ed high-level IP that can be reused repeatedly with location full where it can be tracked and managed as

Design Release management – automated and high integrity

With Altium Designer, design content can be released from the design space into a secure storage vault as a unique, traceable revision. Based on server technology, the managed vault system exists separately from the design system’s own project data storage, but can

released design data, and shared with authorized members of your organization.

From a design-reuse view it means that you can reuse stored design content such as blocks of circuitry, components (and their constituent models) and templates with full confidence in their data integrity.

You will know that an item is the latest revision, can be confident it hasn’t changed since it was released into the vault, and you can see where it’s already used in other designs, thanks to powerful ‘where used’ capabilities built into the system.

Unlike traditional, manual design release systems, fully configurable design release process that targe By addressing the key issues of data integrity, the approach avoids the design risks associated with packaged as full assemblies or bare boards for fab reusing even high level, multi-layered design sections. opens the opportunity to structure the electronics are independent of theItdesign fluid content inReuse, thewhereworkin process around Design for all design elements (from component models to complete designs sections) are released to the vault then reused accordingly.

Design content is automatically validated rel With a Design for Reuse approach, reusingwhen elements becomes the essence of the electronic design process, content is generated asas project configurations opposed to it being just an adjunct or added design that capability option. Vaults are central to the design to named item revisions in the vault (such as sever Visit www.eeweb.com

15

are independent of the fluid content in the workin integrity.

EEWeb PULSE

Design content is automatically validated when re content is generated as project configurations tha to named item revisions in the vault (such as sever

Everything is correct and in synch before the outp release that includes all output files and a snapsho to the source files, and the releases data can be sh using automated publishing to local or internet-ba high integrity design release system that takes the production stage.

Advanced data management for next generation electroni

Altium Designer’s design data management sy the broader product development process. Its harmony with powerful, up-to-date core desig environment.

methodology, where all design content is ultimately released from the fluid, creative design space to a managed, secure release vault. Subsequent, more complex design content can then be built up from those released elements, creating verified high-level IP that can be reused repeatedly with full confidence in its integrity.

4

www.altium.com

Supply chain management – parts availability and cost information, in real time

stage means knowing that its supply is assured for production, that its current cost is appropriate, that model information is correct and more. Altium Designer provides live links to component supplier information, so the vault-based revisions of approved components can be used in new designs with up-to-date knowledge of their lifecycle state, manufacturer, vendor, and their current pricing and availability.

Collections of released components or assemblies can be built to create a catalog of company-ratified, approved parts and equivalents that provide the data and supply

These capabilities combine with Altium’s advan 16 use electronics product development approach Selecting the right component during the design

EEWeb | Electrical Engineering Community

The vault hierarchical data structure allows parent-child relationship on dependencies. So if a child item (say a component footprint mod its parent item (a unified component) cannot be advanced to the hi state of design content can be accessed and managed from within you can make informed while you design with full confide higher ‘production’ state.decisions The approval state of design integrity. content can be accessed and managed from within

information you need to reuse those design elements with confidence. The result is that fully informed parts choices can be made at design time and from within the design environment, allowing you to plan for production earlier and eliminate potential delays or errors.

TECH ARTICLE

the design space itself, where you can make informed decisions while you design with full confidence in the contents suitability and integrity.

Design release management – automated and high integrity

Advanced data management for next generation electronics design

Unlike traditional, manual design release systems, Altium Designer provides a robust, automated, and fully configurable design release process that targets an Altium vault. Released designs, typically packaged as full assemblies or bare boards for fabrication, are stored as locked, traceable revisions that are independent of the fluid content in the working design space.

Altium Designer’s design data management system bridges the gap between electronics design and the broader product development process. Its advanced design management capabilities work in harmony with powerful, up-to-date core design tools, all within a Advanced data management single unified product development environment.

Design content is automatically validated when released to a vault from Altium Designer, where the content is generated as project configurations that map designside elements (typically a board design) to named item revisions in the vault (such as several assembly variations).

Everything is correct and in synch before the output files are generated, creating a high-integrity design release that includes all output files and a snapshot of the design itself. All elements are traceable back to the source files, and the released data can be shared with approved manufacturers and partners using automated publishing to local or internet-based storage services.

The result is a fully audited, high integrity design release system that takes the risk (and worry) out of sending a design to the production stage.

for next generation electronics design These capabilities combine with Altium’s advanced vault technology to enable a low-risk, design-forAltium Designer’s design data management system bridges the ga reuse electronics product development approach that design ma the broader product development process.

Its advanced raises design quality,core while enhancing harmony with integrity powerful,and up-to-date design tools, all within a productivity and making maximum value out of your environment. cumulative design IP and engineering talent.

These capabilities combine with Altium’s advanced vault technolog You reap its full benefits with an Altium subscription usecan electronics product development approach that raises design i plan, which and provides software productivity makingcontinuous maximum value out ofupdates, your cumulative d plugin modules for additional functionality, access to You can reap its full benefits with anthe Altium AltiumLive-hosted design content, use subscription of Altium plan, wh updates, plugindirect modules additionalplus functionality, access to Alti vaults servers, bugforreporting, Altium and use of Altium vaults ■servers, direct bug reporting, plus Altium and peer-based support.

Lifecycle management – from component models to complete board assemblies Along with providing a secure, yet easily-accessible storage system for configured design release output, Altium’s vault technology includes integrated, permission-based lifecycle management. Implemented at a basic or advanced level (to align with company ERP, PLM infrastructure), the system allows you to control the state of released vault items (from constituent component data to complete board assemblies) as defined by what stage they have reached in their life and therefore what they can be safely used for.

5

www.altium.com

The vault hierarchical data structure allows parentchild relationships to determine lifecycle states based on dependencies. So if a child item (say a component footprint model) has only a ‘prototype’ status, its parent item (a unified component) cannot be advanced to the Visit www.eeweb.com

17

C eb om .c m om un ity

W eb Ele ct ric al En w gi w ne w er .e in ew g

EE Making Wireless Truly Wireless: Need For Universal Wireless Power Solution

Dave Baarman Director Of Advanced Technologies

"Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium laudantium,

doloremque totam

rem

aperiam,

eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae

ARTICLES

dicta sunt explicabo. Nemo enim ipsam voluptatem quia voluptas sit aspernatur aut odit aut fugit, sed quia consequuntur magni dolores eos qui ratione voluptatem sequi nesciunt. Neque porro quisquam est, qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatem. Ut enim ad minima veniam, quis nostrum exercitationem ullam corporis suscipit laboriosam, nisi ut aliquid ex ea commodi consequatur? Quis autem vel eum iure reprehenderit qui in ea voluptate velit esse quam nihil

JOBS

COMMUNITY

DEVELOPMENT TOOLS

JOIN TODAY

World’s lowest power capacitive sensors with auto-calibration NXP is a leader in low power capacitance touch sensors, which work based on the fact that the human body can serve as one of the capacitive plates in parallel to the second plate, connected to the input of the NXP capacitive sensor device.

Thanks to a patented auto-calibration technology, the capacitive sensors can detect changes in capacitance and continually adjust to the environment.

Things such as dirt, humidity, freezing temperatures, or damage to the electrode do not affect the device function.

The rise of touch sensors in modern electronics has become a worldwide phenomenon, and with NXP’s low power capacitive sensors it’s never been easier to create the future.

Learn more at: touch.interfacechips.com

EEWeb PULSE

Cheap, Smart, Tiny.

20

How TinyCircuits is producing robust hardware EEWeb | Electrical Engineering Community in a small (tiny) package

STARTUP SPOTLIGHT

TinyCircuits is an Open Source Hardware company that designs and manufactures small—well— tiny electronics. The company’s founder, Ken Burns, is a graduate of the University of Akron and worked at a few different companies in the area designing everything embedded—from microprocessors to firmware to software.

His experience in embedded product design led him to think about branching off to TinyCircuits around five years ago.

Got a penny?

TinyCircuits’ ‘TinyLily’ Peripherals can fit three components on a penny with room to spare!

Visit www.eeweb.com

21

EEWeb PULSE

Ken Burns - Founder of TinyCircuits

The Idea

Photographs courtesy of Tim Hollister

initial target was for wireless sensor networks and that diverged towards a more generic, easy-to-use “It was around the time that ZigBee and other wire- approach that could be used by hobbyists, but also less sensor networks started to come out,” Burns embedded into their products.” told us, “and there was a lot of buzz around those in academia.” Burns started noticing that some of the The Kickstarter Approach customers at his previous company were interested in bringing ZigBee wireless networks into their With the idea to start a company for small, easy-to-use and embeddable electronics, Burns turned to Kickstarter for products. “I kind of had the feeling that there’s a some initial fundraising. While designing the Kickstarter really great business opportunity here,” Burns said, campaign, Burns noticed some other benefits of using “we wanted to start this company based around the site; “The biggest benefit of Kickstarter is using it small modules to achieve a basic idea.” This was as a marketing tool,” Burns explained, “we built some around the same time that Arduinos were becom- prototypes and showed them to a number of people ing really popular in the electronics world, and that were extremely interested.” The campaign allowed Burns saw an opportunity arise out of that. “The de- thousands of people to view the prototypes and pledge cision then was to standardize on Arduino’s popu- money—ultimately raising around $110,000. While this larity and make it very small,” Burns told us. “Their sounds like a big investment, when people pledge

22

EEWeb | Electrical Engineering Community

money on Kickstarter, they are essentially putting down some money to get something in return. If the project doesn’t meet its intended goal, then the pledgers get their money back—there is virtually no risk for pledgers as opposed to the traditional way of raising money with a group of investors. While the TinyCircuits Kickstarter surpassed their fundraising goal, the exposure proved to be equally beneficial; “We had about 15,000 people actually watch the video on Kickstarter,” Burns told us, “and in return, we had a huge amount of hits to our website. From that standpoint, it was really a great success.” A large portion of the Kickstarter funds went to TinyCircuits’ inventory and online web store.

The Products As part of the initial launch of TinyCircuits, Burns and his team developed something based around the Arduino processor board with the idea that it could branch out into other processor families or modules. They have announced a WiFi board, a BlueTooth board and a GPS board—all in a very small form factor. “These are sorts of things that now allow people to very easily enable a product,” Burns told us, “where as before, with things like that, you’d be using a bunch of development boards from Microchip or whoever else and try to put something together that might not be ideal.” With TinyCircuits’ approach, according to Burns, you get a very unique result: “You can actually take the an idea, put it together in a very small form factor, prove a concept or even take that to market.” Keep your eyes peeled for TinyCircuit’s online web-store, which will make these tiny, easily programmable and embeddable circuits available to the masses.

STARTUP SPOTLIGHT

Tiny products, big results.

By using an Arduino processor board, TinyCircuits’ products could easily branch out into other processor families or modules.

Cheap, Smar

How TinyCircuits is producin robust hardware in a small p To find out more information about TinyCircuits, visit:

www.tiny-circuits.com

Visit www.eeweb.com

23

EEWeb PULSE

24

EEWeb | Electrical Engineering Community

TECH ARTICLE

Microcontroller

Security System RobertRieman Riemen Robert

Computer Engineering Student The University Of Cincinnati

How to create a basic home security system using the BASIC Stamp homework board.

Visit www.eeweb.com

25

EEWeb PULSE This kit has a breadboard attached as shown in the image below. There are 16 designated I/O pins on the left side of the bread board. The board also contains your standard Source voltage pins as well as ground pins.

Because of the setup of this HomeWork Board, with the breadboard already pre-soldered, it is very easy to use components to develop moderately complex systems.

Circuit Construction There is plenty of I/O involved in this project. The main list of components is as follows: • Parallax Standard Servo Motor • Sharp IR Sensor • PIR Sensor • Piezoelectric Speaker • 2 NO Pushbuttons • 10k Potentiometer • Common Anode Seven Segment Display • NPN Transistor • BCD to Seven Segment Decoder (74LS47) • LCD Screen • 4 LED’s

This basic security system will be similar to that of a home security system, such an ADT Home security system. Many of the I/O components from the original BASIC Stamp Activity Kit will be used in conjunction with two IR sensors and a LCD screen. Using this and an effective program, a capable security system can be created.

• Green • Yellow • Bi-Color LED

Servo Motor

Pin 15

Pin 14

100 kΩ 0.1 µF

Pin 13

• Red

470 kΩ

LIGHT GREEN

470 kΩ

GREEN

Sharp IR Sensor

100 kΩ

PIR Sensor

Pin 12

Pin 11

+

F 470 kΩ

YELLOW

470 kΩ

RED

–

(+5) Vdd

1 kΩ F

Pin 10 1 kΩ

F

Pin 9 BCD 1 kΩ

To

Pin 8

Vss

F

Seven Segment Decoder

1 kΩ F

Pin 7 1 kΩ F

Pin 6

1 kΩ

With this in mind, construct the circuit for this system in the figure on the left.

F

Pin 5

1 kΩ

All of these components have to be taken into consideration when developing this project. The BASIC Stamp homework board has a 20/25 mA Source/Sink current, and a 500 mA Vdd Source Current. The board also has a 5 V power supply through an LM2936 regulator from a 9V transistor battery. If there are too many components drawing too much current and/or voltage, the system will not be able to run. Fortunately, my Homework board was able to rise to the challenge and effectively house each I/O component listed above.

Seven Segment Display

Pin 4 Nc

220 Ω

Pin 3

Pot 10 kΩ

0.1 µF 10 kΩ

10 kΩ

Pin 2

Pin 1 220 Ω

Pin 0 220 Ω

26

EEWeb | Electrical Engineering Community

Use 14 I/O pins to house the 10 main components. There a quite a lot of components to fit on the small breadboard that is mounted on the BASIC Stamp Homework board.

PROJECT

You will also need two extra breadboards in order to fit all the components. A physical setup is shown above.

version with 15+ pins. I begin with implementing the BCD to Seven Segment Decoder IC.

Most of the components have a simple setup. This means that either they are directly connected to the I/O pin or they have the use of a resistor to limit current flow from the I/O pin. However, the circuit contains a BCD to Seven Segment Decoder integrated circuit (IC) and a NPN Transistor to help simplify the design. This helps reduce the number of pins used. There are only 15 pins on the Basic Stamp HomeWork Board, and to keep costs low, there was no reason to upgrade to the professional

You can see in the image that there is a BCD to Seven Segment Decoder IC, which is included because in order to power the Seven Segment Display, eight pins have to be configured. There are a total of 16 pins, which then reduces total pins to seven. This project needs more than seven open pins. The BCD to Seven Segment Decoder reduces the pins required by the Seven Segment display to four pins. Four extra pins can now be used for other I/O.

The NPN transistor is setup as:

Visit www.eeweb.com

27

EEWeb PULSE The diagram on page 29 shows how to interface the Sharp IR distance sensor with an NPN transistor. This setup is actually much easier than the setup suggested

by Parallax’s original documentation posted on their website. In the original documentation, the setup calls for an Analog to Digital Conversion to take place in the program code. Unfortunately, with all of the I/O involved, it would have been impossible to implement Analog to Digital conversion without upgrading EEPROM. So, using this method we can use the standard RCTIME function to read the charging and discharging time of the capacitor. From this reading, distance of an object (or intruder) can be detected.

• The system will be programmable

How it all Works (Program Flow)

• LCD (Debug Window) to be implemented for alphabetical display

With so many components, the possibilities should be endless. But, with only 2KB standard EEPROM, there is only so much that can be programmed. With that in mind, the system will be designed as follows:

• Change passcode • Change time limit of active system • The system will be programmable when the user holds the reset button for 3 seconds • Sensors implemented • Sensor to watch if someone is present when entering passcode • Sample sensor to monitor a room for intruders.

• Shows passcode that has been entered • Shows message for idle status • Used to select time limit

• System will be idle waiting for user to enter a passcode

• General notifications for ease of use.

• A potentiometer is used to cycle through 0-9 • 0-9 displayed on seven segment display

• Security

• Passcode is 4 separate numbers

• System will alarm if the system is in idle mode but he system doesn’t sense anything in from of the panel.

• User gets three tries to enter passcode • Alarm sounds if incorrect more than three times • LCD shows what numbers have been entered • LEDs will symbolize the status of the system.

• A yellow LED will show idle status

• If there is anything detected in the room behind the door controlled by the servo, then an alarm sounds • If an intruder enters the wrong passcode 3 times, an alarm sounds • User has to enter current passcode before entering new passcode.

• A green LED will show active status, meaning the passcode is correct and users are allowed in

• If the system alarms, two things have to happen before the alarm is reset.

• A red LED will show alarm status • LED will blink when alarmed • Sound system will be used to notify users alongside LEDs

• The user has to hold the reset button to acknowledge the alarm

• The user has to type in the stored passcode correctly

• Short negative beep to indicate incorrect passcode Having this programmed will bring total EEPROM used to around 97%! Having this much code actually does not • Short positive beep when user enters correct slow down functionality, however. With the BASIC Stamp Homework Board, the code involved is of language I password and gains entry to system. used PBASIC because it is much simpler to involve than • Alarm type sound notification if system is alarmed another coding language.

• Short neutral beep to indicate pushbutton pressed

28

EEWeb | Electrical Engineering Community

PROJECT My idea behind using a potentiometer to control the number on the Seven Segment display is to emulate a spinning combination lock. To make a more sleek looking design, use a Common Anode Seven Segment display where the pins are on the top and bottom on the underside of the device. As shown in the picture below, the display can appear sideways if you have a display with pins on the sides. â–

Final Update Before posting this article, I decided to modify the project to include an enclosure. This final version is what I would like a prototype to look like for the security system. The final version has the LCD added, but the servo motor has been removed. In terms of modification of the above circuit, the servo motor has the same connections as the serial LCD. These images are of the final circuit as well as the system in an enclosure.

Visit www.eeweb.com

29

Corporate Backfire

Chip’s Birthday

Pretty Little Circuit