Automatic Pretreatment Machine Pretreating can be a messy process, and when using a hand-held Power Sprayer you have to be far away from your DTG machine. NeoTreat is a stand-alone machine, digitally controlled with touchscreen, so it is clean and easy to operate, and pretreating can be done right next to your DTG machine. NeoTreat works with all pretreatment solution brands for every directionto-garment printer. The length and speed of the spray can be easily adjusted using the touchscreen, and your settings save in preset. So if you only need to partially print the T-shirt, just spray part of the T-shirt, and recall your setup from the stored ones.
No need for external air compressor Draw directly from your original pretreatment container Power Requirements:100 or 220V, 5A plugs into a regular outlet Pretreat up to 410 x 610mm (16” wide 24” long) Digitally adjustable spray length and speed Digital memory for up to 10 setups Dimensions 40” x 24” x 20” (LxWxH) Youth T-shirts plate included
Consistency! Using a Power Sprayer to pretreat T-shirts is a practiced art, and no two people in your shop will spray the same way. NeoTreat will give you even and consistent pretreated garments one right after another.
NeoTreat fully encloses the pretreatment process. Since you don’t get overspray outside the NeoTreat, it can be positioned directly next to your DTG machine. Pretreating a T-shirt takes about 6 seconds. By moving the external feed hose from your pretreatment solution to a water container, you can quickly flush the hoses and nozzle clean. An easyaccess rear door lets you quickly and simply remove the spray nozzle to clean it. The spray compartment can be wiped clean in just a few seconds.
All American MFG & Supply 215-634-2236
www.screenprintsupply.com 495 E Erie Ave,
Philadelphia PA