Preparation of the Garage Floor Concrete Surface Preparation is the most important step in ensuring a long lasting garage floor coating in Dallas. This is done by using a specialized concrete grinder. The process opens up the pores of the concrete allowing the base coat to penetrate into the concrete itself. It also removes the wear layer that contains contaminants from spills, tire residue etc., that can cause a garage floor coating to lift. In addition to this, our 550 lb. planetary machines also provide a nicer concrete surface, by leveling out most waves, and high spots in your original concrete slab.
We also repair pits and minor cracks at no extra charge, giving you a better looking concrete slab to install the garage floor coating. If your floor requires substantial crack repair; this can be done for a nominal charge. Make no mistake; other methods like primers and acid etching simply do not work. The processes are utilized by those who are simply unqualified and don’t own the necessary equipment to do the job properly. Acid etching is the use of ammonia to chemically etch the concrete surface. It emits harmful vapors that can be dangerous for the homeowner. It also does not create enough the proper surface to bind the floor coating to the concrete when your vehicles are driven on it.