Ais may jun 2013 metro web

May – June 2013

s u o i r Se year mid-

499

$

a g me

E L A S

Industrial Diesel Fan Heater 20kW (200m2) • Instant heat • Compact and portable • Incorporated fuel tank • Efficient operation. IDH-20

BONUS

3rd Battery

• C18DD - drill driver • C18ID - impact driver • 30min charger • 2 x M18 1.5Ah lithium-Ion batteries, M18 voltage charger & carry case. C18PP2A-22C

16pc Metric Geared Spanner Set

Purchase Macnaught Gear at AIS and go into the draw

• 8mm to 25mm sizes • Handy storage roll • Reversible ratchet • Industrial quality 9602R

See page 27 for more details

18V Battery Pistol-Grip Grease Gun

189

$

over 100 stores see back page to find your local

379

$

2pc Kit - Drill/Driver & Impact Driver Kit

• Suits 450g cartridges and bulk-filling • Fitted with block nut and air release valve • Comes with 1000mm flex extension 4 jaw coupler • Battery charger, 2 x batteries and shoulder strap • Develops up to 51,700 kPa (7,500 psi) • Delivers up to 50g/min in free flow. L-BG18V

249

$

BONUS

13pc AF Geared Spanner Set 9509R

www.aisnational.com.au On sale 01/05/2013 until 30/06/2013

mega

WARRANTY

SALE

serious power tools

BONUS 125mm (5") Angle Grinder Kit

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

NEW

M18 Fuel Impact Wrench Skin Only

D28130KS-XE

259

329

$

279

$

$

22mm SDS+ Combination Rotary Hammer 650W

• 1/2" anvil with detent pin • 280Nm of torque power • 3 stage drive control with torque setting • Powerstate brushless motor. M18CIW12-0 Also Available: M18CIW12-402C Kit complete with 2 x 4.0Ah Batteries $559

560W Powershear

• VSR 0-1,550 RPM, 0–4,550 BPM, 2.4 joules impact energy, safety clutch, side handle adjustable depth stop rod, kitbox, capacity: wood 30mm, metal 13mm, concrete 22mm • Kit includes: protective keyless guard, multi position anti-vibration side handle Inner & outer disc flanges, spanner, kit box, 9 discs (4 x grinding, 4 x cutting, 1 x diamond) • 240V. D25013K-XE

135

• Ideal for corrugated sheets etc • Cutting capacity; sheet steel: 1.6mm stainless steel; 1.2mm • Speed: 2,800RPM • Torque: 5 Nm • Minimum cut radius; 50mm • Auto stop carbon brushes • 240V. Powershear

219

$

449

$

$

180mm (7") Angle Grinder 850 Watt, 125mm (5") Angle Grinder • Speed: 11,000 rpm • Side switch for easy operation • Auto stop carbon brushes • Four air outlets for better airflow & improved performance • Three air slots for optimised air cooling • 240V W85125

125mm Concrete Planer

• Outstanding durability with super anti-dust structure and machined bevel gear • Low vibration rear handle with soft grip and anti-vibration side handle • Rotatable rear handle • Torque limiter to help prevent lock nut from over-tightening • Depressed centre wheel 180mm • Continuous rating input 2,400W • 240V. GA7040S01

• Electronic control with constant speed control & electronic current limiter which protects motor from overload • Wheel size 125mm (dia) • No load speed of 10,000RPM • 240V. PC5000C

475

$

79

$ 100mm (4") Angle Grinder

• Labyrinth structure seals around bearings and protects motor from dust and dirt • Side switch for positive on and off • Shaft lock button for easy wheel changes • Depressed centre wheel 100mm • No load speed of 11,000RPM • 240V. 9556NBK

225

$ 125mm (5") 1300W Angle Grinder

• 1300W motor for the toughest jobs • Lockable slide switch on top • Shaft lock button for easy wheel change • Two position anti vibration side handle for easy operation and user flexibility • Excellent dust durability with improved internal protection • Convenient tool-less wheel guard for easy adjustment • 240V. G13SB3

260mm (10") Slide Compound Mitre Saw • Laser marker for easy cut line alignment • Bevel range - left 45° right 45° • Mitre range - left 47° right 60° • Blade diameter 260mm • Powerful 1,430W motor • Electric brake • 240V. LS1018L

355mm (14") Portable Cut Off Saw

269

369

$

Compact Reciprocating Saw 1050W • Capacity: wood = 300mm plastic = 160mm metal = 130mm • 4-position keyless blade clamp • 0-2,800 RPM • 28mm stroke length • Heavy duty case • 240V. DWE357-XE

$

1100W Impact Drill, Safety Clutch, 2 Speed • 1100W impact / hammer drill • Variable speed: 0-900/0-2,800 rpm • Torque: 44 Nm - impacts / minute: 53,000 • Drills: steel, wood, concrete: 16mm / 40mm / 20mm • Safety clutch - prevents kickback • Marathon motor - extends tool life • 240V. SBE 1100

The right price & serious advice 2

• D-shape handle for easy gripping • Lock off button • Quick release vise • Shaft lock for easy wheel changes • Spark diversion guard • Guide plate adjusts 45° right and left • 2400W • 240V. 2414NB-2

329

$

529

729

$

$

18V 2pc Combo Kit

2pc Fuel Kit Drill/Driver & Impact Driver Kit 2 x 4.0Ah Batt

BONUS 3rd Battery

• M18CPD-0 - fuel percussion drill driver • M18CID-0 - fuel impact driver • 2 x 4.0Ah Li-Ion batteries, M12/M18 multi-voltage charger & carry case • Both tools come with Powerstate brushless motors. M18PP2A-402C

via Redemption

mega DEAL

5 2 TOOL

BATTERY

M12 Fuel 9 (Brushless) 13mm Percussion Drill Kit

3pc M18 Milwaukee Fuel CPD, CID & AG

299

$

• M18CPD - fuel percussion drill / driver • M18CID - fuel impact driver • HD18AG 115mm angle grinder • 2 x M18 4.0Ah lithium Ion batteries, M12 / M18 multivoltage charger & contractor bag. M18PP3B-402B

• M12 fuel percussion drill/driver • 2 x M12, 2.0Ah lithium Ion batteries, M12 voltage charger & carry case • On board fuel gauge • 13mm keyless chuck • Powerstate brushless motor. M12CPD-202C Also Available: M12CID-202C New M12 Fuel 1/4 Hex Impact Driver Kit $299

799

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

899

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

BONUS Radio C12-28DCR

mega DEAL

Massive 1485Nm

$

HD18VC

$

CORDLESS LI-ION

WARRANTY

WARRANTY

NEW YEAR YEAR

BONUS Vacuum Cleaner WARRANTY

• BHP458RFE 18V mobile hammer driver drill • Mechanical 2-speed gearing • Impacts per minute: high 0 - 30,000ipm low 0 - 6,000ipm • BTD140Z 18V mobile impact driver (tool only) • Built-in LED light • Impact rate of 0 - 3,200bpm LXT211

20V Cordless Impact Wrench

WARRANTY

• 1100 ft-lbs nut busting torque • Max forward torque 780 ft-lbs • 2 x 20V 3 AH Li-ion batteries and carry case • 1/2" drive • 1485Nm • Weight 3.1kg • Brushless motor • Battery charger with USB charging point W7150EU-K2

19mm 850W Impact Wrench • Powerful 850W motor with a maximum torque of 610Nm for high torque applications • Rocker switch for easy forward and reverse • Large bumper protects the outer frame and helps protects work pieces • Soft grip handle for easy handling and user comfort • Aluminium die-cast body for longer service life • 240V. WR22SA

849

$

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

CORDLESS LI-ION

5 2

YEAR YEAR TOOL

BATTERY

BONUS 3rd Battery 2pc Kit - Drill/Driver & Impact Driver Kit • C18DD - drill driver • C18ID - impact driver • 30min charger • 2 x M18 1.5Ah lithium-Ion batteries, M18 voltage charger & carry case C18PP2A-22C

379

$

409

$

18V XR Li-Ion Compact Hammer Drill/Driver & 18V XR Li-Ion Grinder Bare Unit

• Latest generation 18V XR Li-Ion compact hammer drill/driver featuring NEW XR Li-Ion battery technology • Two speed all metal transmission 0-600/0-2000 • 14 position adjustable torque control • Compact 13mm single sleeve keyless chuck with automatic spindle • Bright white LED with delay feature • Multivoltage charger • DCG412N: 125mm • Keyless guard • 7000RPM • M14 spindle thread. DCD785L2-XE

Serious trade Tools

BONUS 18V Grinder DCG412N

3

mega

cutting, drilling & abrasives

SALE

General Purpose Bench Grinding Wheels Pack of 10

Grinding Polifan Flap Discs

from

Mega Inox Ultra Thin Cutting Wheels

59

$

• High stock removal • Suits surface and edge grinding on all materials including stainless steel Part No Description Each 6774-4125 125mm - 40 Grit Zirc $6.95 6774-6125 125mm - 60 Grit Zirc $6.95 6774-8125 125mm - 80 Grit Zirc $6.95 6776-4125 125mm - 40 Grit Al.Ox $6.95 6776-6125 125mm - 60 Grit Al.Ox $6.95 6776-8125 125mm - 80 Grit Al.Ox $6.95

230ea

$

• For cutting stainless steels and ferrous metals • Free of iron, sulphur and chlorine to assist in the prevention of contamination of the stainless steel surface after the cutting process Part No Size (mm) Each 100 Pack 15102010 100 x 1.0 x 16 $2.30 $160 15115010 115 x 1.0 x 22 $2.50 $175 15127010 125 x 1.0 x 22 $2.90 $195

• Aluminium Oxide for ferrous metals • Ideal for off hand grinding Part No Description BV188026 150 x 25 x 25.4mm A36PVBE Coarse BV188034 150 x 25 x 25.4mm A46MVBE Medium BV188042 150 x 25 x 25.4mm A60MVBE Fine BV325929 200 x 25 25.4mm A24QVBE Very Coarse BV188069 200 x 25 x 25.4mm A36PVBE Coarse BV188085 200 x 25 x 25.4mm A46MVBE Medium BV188093 200 x 25 x 25.4mm A60MVBE Fine BV188524 200 x 25 x 25.4mm A80MVBE Very Fine BV188158 300 x 50 x 50.8mm A24QVBE Very Coarse BV188166 300 x 50 x 50.8mm A36QVBE Coarse BV188174 300 x 50 x 50.8mm A46MVBE Medium BV188182 300 x 50 x 50.8mm A60MVBE Fine

from

11ea

$

85

Polifan STRONG Ultimate Grinding Flap Wheels

25

• One wheel for safe cutting, grinding and polishing of structural steels, sheet metals and stainless steel • Complies with AS 1788.1:1987 • Depressed centre Part No Size Each 25 Pack 7210016 Cutting discs 100x2.2x16 A46S-BF $3.30 $66 7211522 Cutting discs 115x2.2x22 A46S-BF $3.60 $72 7212522 Cutting discs 125x2.2x22 A46S-BF $3.90 $78

2995

22" 550mm Economy Handsaw • Handsaw for cutting all types of wood • Universal toothing with hardpoint teeth for long lasting sharpness • Screwed 1 piece plastic handle NP-22-U7/8-HP

• Automatic blade loading • Includes 5 genuine Sterling Made in UK blades • Quick-flip blade change function for the fastest blade changing knife in Australia • Comfortable shaped grip and all metal construction • Metal belt clip. 3038

BONUS 180 Grit Diamond Grinding Wheel

• Metal and timber blades • Plumbers or electricians kit • Bonus case 12143

34

95

$

Stealth Autoloading Knife

BONUS Profold Knife

9pc Reciprocating Blade Kit

$

1695

$

Heavy Duty Blades Dispenser of 100 • Made in Sheffield UK • High Carbon alloy steel • Precision ground and sharpened to a razor edge that provides maximum sharpness and durability • Fits all heavy duty utility knives • Ideal for cutting rubber belting, plasterboard, flooring and general cutting. 921-2D

$

All In One Disc

• Wet or dry application • 10mm segment for longer life • For use in angle grinder / circular saw / tile saw Part No Description Price UNI-10520 105 x 2.0 x 10 x 20/16 $9.95 $29.95 UNI-15022 150 x 2.1 x 10 x 22.2/20 UNI-23025 230 x 2.5 x 10 x 25.4/22.2 $49.95

$

330ea

95

General Purpose Segmented Diamond Blades

High abrasive quality and long life • Suitable for the most demanding applications • Amazing stock removal on mild steel • ZIRCONIA suitable for higher powered angle grinders • Remove more material in less time • Highly aggressive grinding bevelling and chamfering performance.

Part No Description Price 67788025 PFC 125 Z 36 SGP-STRONG $11.85 67788125 PFC 125 Z 50 SGP-STRONG $11.85

Drill Doctor 750X • Tradesman drill bit sharpener • 2.5mm - 19mm(¾”) drill bit capacity • Creates & restores split point bits • 115° to 140° sharpening angle • 3 year warranty. DD750X

399

$

from

Venom Endurance + Cutting Fluid • Reduces torque and friction • Extends tool life • Accurate thread quality • Improves surface finish • Environmentally friendly mineral oil base with 10% organic coconut oil, free from Trichloroethane - low odour Part No Description Price M8004000 Fluid 4Lt $139 M8000250 Fluid 250ml $12 M8000400 Cutting paste 400g $25

AIS gift vouchers - perfect for the trade professional 4

Price $14.90 $14.90 $14.90 $18.90 $18.90 $18.90 $18.90 $18.90 $75 $75 $75 $75

from

9 ea

$

from

1490ea

$

12

$

139

105

$

215

$

$ 26pc Metric HSS Tap & Drill Set

Viper S14 Maintenance Holesaw Set

Viper S5 General Purpose Holesaw Set

• Holesaws: 19, 22, 25, 32, 35, 38, 44, 51, 57, 63 & 76mm • Can be used for machine or hand drilling • Suited to cut steels, cast iron, non ferrous materials, plastic and wood • Made from bi-metal HSS. H114S14 Part No Set Size Price H114S1 Starter 20, 25, 32, 38 & 54mm $59 H114S3 Carpenters 32, 38, 51, 54, 76, 92 & 105mm $138

• Holesaws: 16, 19, 22, 25, 29, 32, 35, 38, 44, & 51mm • Can be used for machine or hand drilling • Suited to cut steels, cast iron, non ferrous materials, plastic and wood • Made from bi-metal HSS H114S5 Part No Set Size Price H114S7 Plumbers 41, 51, 57, 73, 86 & 111mm $129 H114S9 Electricians 16, 20, 25, 32, 40 & 51mm $75

• Suitable for materials up to 1000N/mm2 • Through & blind holes • Suitable for both hand and machine operations • Depths up to approx.

1 x d1 • Tap sizes: M3, M4, M5, M6 (taper, inter & bottoming), M8, M10, M12 (taper & bottoming) • Tapping drill sizes: 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 & 10.2mm. T901HM26

35pc 1/4" High Torque Bit Set

21pc Imperial Drill Set

BONUS Cutting Paste

DEAL mega 50

Kit Includes: • Magnetic insert bit holder: 60mm length, 1/4" hex, zinc chrome plated steel • Magnetic nut drivers with 1/4" hex shank: 6, 8, 10 • 25mm screw driving bits: #1 phil (3), #2 phil (7), #3 phil (3), #1 sq (2), #2 sq (5), #3 sq (3), T15 torx, T20 torx, T25 torx • 50mm screw driving bits: #2 phil (2), #2 sq (2), T25 torx • Hard plastic stackable storage case for convenient storage and durability. 728699

from

3495

$

37

$

• 1/16" - 3/8" x 1/64ths • Metal case • Australian made • High speed steel • Industrial quality made to exacting specifications • Designed for machine and hand held drilling in ferrous and non ferrous materials. 150B00WF2 Part No Size 150B00WF3 29pc 1/16" - 1/2" x 1/64ths 150B00WM2 19pc 1 - 10mm x 0.5mm 150B00WM3 25pc 1 - 13mm x 0.5mm

62

$

Price $133 $61 $120

Rotary Hacksaw Blades • No heat, no burrs, no dust with minimal sparks • Will not wear like abrasive wheels • Can be resharpened • The cutting width and depth is consistent • Cuts metal, timber and aluminium • Lubricant is required when cutting aluminium Part No Description Price RHS 1031620 103mm x 16mm x 20 teeth $34.95 RHS 11522220 115mm x 22.2mm x 20 teeth $39.95 RHS 12522220 125mm x 22.2mm x 20 teeth $39.95 RHS 1602030 160mm x 20/16mm x 30 teeth $99.95 RHS 185201636 185mm x 20/16mm x 36 teeth $99.95 RHS 185201660 185mm x 20/16mm x 60 teeth $129 RHS 2102540 210mm x 25mm x 40 teeth $129 RHS 2302522248 230mm x 25-22.2mm x 48 teeth $129 230mm x 25mm x 60 teeth $149 RHS 23022260 RHS 2502560 250mm x 25mm x 60 teeth $149 RHS 3002560 300mm x 25.4mm x 60 teeth $189 RHS 3502580 350mm x 25.4mm x 80 teeth $279

995

$ Hacksaw 12" D Shape

• 3.5” Cutting depth • 12” Fixed blade length • 3 adjustable cutting angles • Durable steel frame • Cuts metal, timber, & aluminium. STHT20138 Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

40pc Medium Ratcheting Tap & Die Set Metric • Medium tap and die ratcheting “T” wrench • Small & medium tap adapter • Medium hex die adapter • Sliding “T” for adapters • Thread gauge & #5 screwdriver 3886 Also Available: 3885 Imperial set $69

5pc Carbide Burr Set

69

$

89

Extractor and Drill Set

$

• Cylinder, cylinder with radius top, ball, tree with radius top and oval egg burrs • 1/4" shank. SP31380 Also Available: SP31385 5pc Carbide Burr Set (suits aluminium) $89

8595

$

• Designed for the removal of stubborn broken studs and screws using a drill • Fluted extractors provide a solid grip on broken studs or screws ranging from 3/16" to 9/16" (4-14mm) • Removes studs with the highest allowable torque without expansion, breaking or jamming • Ideal kit for automotive, building, engineering, plumbing and electrician trades. 301534

750

$ 3pc Socket Adapter Set • 1/4 hex to 1/2 square" 75mm length • 1/4 hex to 3/8 square" 65mm length • 1/4 hex to 1/4 square" 65mm length 751970

Serious trade Tools

5

mega

SALE

serious hand tools 198pc Metric/AF Tool Kit

• 1/4" Dr sockets & accessories • 150mm socket driver • 3/8" Dr sockets & accessories • Spark plug sockets • Socket accessories • Ratchet extensions • Adjustable offset handles • Universal joints • Adaptor 3/8” female to 1⁄4” male • 1/2" Dr sockets & accessories, 19 met sockets 8 - 32mm, 17 AF sockets 3/8 1-1/4" • Ring & open end spanners • Screwdrivers • Punches & cold chisels • Adjustable wrenches • Multi-grips 250mm • Pliers • Ball pein hammer 450g • Hacksaw 300mm • Feeler gauge set • Circuit tester • 8 drawer tool chest heavy duty SCMT10133

99

$ 43pc 1/2” Metric/AF Socket Set

• Metric sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32mm • AF sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4” • Spark plug sockets: 5/8, 13/16” • Socket accessories: ratchet, 75, 125 & 250mm extensions, flex bar & uni joint. 89-509

17995

$

1499

$

3995

$

603pc Metric/AF Tool Kit in Custom Series Tool Box

BONUS 5 DRAWER Roller CABINET

75pc, 1/4" & 1/2" Drive Socket Set • Imperial & metric • 22 metric sockets; 19 imperial sockets • 1/4" & 1/2" drive accessories • 18pc bit set: blade - 3mm-6mm; phillips - No.1, 2 & 3; hex - 2.5mm, 5mm, 6mm: TORX® - T15, T40; tamperproof - T15, T40. K2148

SCMT50215

139 each

159

• 10-32mm and 3/8-1-1/4" sockets • Flex handle • Spark plug sockets • Ratchet handle • Extension bars, universal joint • Go to www.sphandtools.com for a complete listing. SP20300

125 each

$

$

41pc 1/2" Dr 12pt Metric/AF Socket Set

• All sockets, socket accessories & ROE spanners come in hi-density foam storage systems • Kit includes 1/4", 3/8" & 1/2" sockets and accessories • ROE, stubby ROE and geardrive spanners • Adjustable wrenches, T-Handle hex and TORX keys, pliers, cutters and wire strippers • Go to www.sphandtools.com for a complete listing. SP50165

$

15pc 1/2" Dr 6pt Metric Deep Impact Socket Set

12pc 1/2" Dr AF Impact In-Hex Socket Set

• 10-24mm deep impact sockets • Extension bars • Universal joint SP20320 Also Available: SP20315 1/2"Dr 14pc AF Deep Impact Socket Set 3/8"-1" $139

• 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 11/16 & 13/16" 11324A Also Available: 11324M 12pc 1/2" Dr Met Impact Inhex Socket Set 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm $125

59

260

$

$

5995

$

26pc 3/4" Drive Metric/AF Socket Set

23pc 1/4" Dr 12pt Metric/AF Socket Set • 4-13mm 12pt sockets • 3/16"-1/2" 12pt sockets • Flex handle and ratchet • Extension bars • Go to www.sphandtools.com for a complete listing. SP20100

• Metric 22 - 50mm • AF 7/8" - 2" • 2 extension 100 & 200mm • 1 sliding T-handle • Heavy duty ratchet • CR-V steel ET11000

We're serious about customer service 6

48pc 1/4" Drive Socket Set - Metric/AF • Metric sockets: 4 - 13mm • Imperial sockets: 5/32 - 1/2" • 8 accessories • 18 bits • Mirror polish. K2145

mega DEAL

mega DEAL

998

$

265pc Metric/AF Toolkit in a 4 Drawer Ute Box • 4 drawer ute box with HDFI inserts • 1/4, 3/8 & 1/2" Dr sockets & accessories • Adjustable wrenches, punch & chisel set • Various pliers, multigrips, spanner sets • Screwdriver sets & bit set • Hammer, podger bar and much more ATK704U

329pc, 15 Drawer Contour Tool Workshop - Blue

230pc Metric/AF Tool Kit in Concept Series Red Tool Box • All sockets, socket accessories & ROE spanners come in hi-density foam storage systems • Kit includes 1/4", 3/8" & 1/2" sockets and accessories • ROE spanners • Adjustable wrenches, pin punch and chisel set, pliers, cutters and screwdrivers • Go to www.sphandtools.com for a complete listing. SP50040 Also Available: SP50041 Atomic green, SP50042 Hyper blue, SP50043 Ballistic orange

• Metric/AF • 89pc, 1/4", 3/8" & 1/2" sockets & accessories • Mirror polish spanners • Hex & TORX® key sets, pliers, screwdrivers, adjustable wrenches, hand files, punches, universal bit set and much more...

K1501 Also Available: K1501G Green K1501O Orange K1501R Red

199 each

$

1995

$

from

2495

$

2199

$

8pc 3/4" Dr 6pt Metric Deep Impact Socket set • 24-46mm deep impact sockets • Go to www.sphandtools.com for a complete listing. SP20420 Also Available: SP20425 3/4"Dr 8pc AF Deep Impact Socket Set 1"-1 1/2" $199

169

4995

$

$

3800CHV Crescent Pliers (1000V)

Locking Plier • The original locking plier • Curved jaw. 10CR Part No Description Price 11R C Clamp locking plier $39.95 8R Sheet metal tool $29.95 9R Welding clamp $29.95 6LN Long nose plier $24.95

57pc Metric/AF 6 Pt Standard & Deep Socket Set 3/8" Dr • 3" & 6" extensions, universal joint, stubby teardrop & teardrop ratchet, plus 52 sockets (mix of 6pt, SAE & metric, std & deep) 80550

5495

$

• Premium quality forged alloy steel for toughness and durability • Insulated grips • Precise jaw gap for wire work • Cross hatch jaws for positive grip • Serrated pipe grip • Renowned for providing years of work and performance • Extended and hardened cutting jaw for use with flat multicore cabling • Built in crimper for use on 1.5mm2 to 6mm2 solderless connectors • Australian made 3800CHV

from

65

$

1995

$ FatMax Pliers

Linesman's/Electricians Pliers • Anvil and knife cutting edge • Insulated to 1000V • Made in U.S.A. 3248 Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

• Drop forged, high carbon alloy steel for long life and durability • Up to 45% less cutting effort with up to 33% longer lasting cutting edge • Dual durometer bi-material grips provide a comfortable and secure grip • Combination and diagonal cuttings have a leverage design for heavy duty use Part No Description Price 89-970 Long Nose 200mm $19.95 89-868 Combination 200mm $24.95 89-859 Diagonal 190mm $19.95 89-861 Diagonal High leverage 200mm $24.95

210mm ERGO Bolt Cutter • Power cutter with centric precision cutting edges • Forged cutting edges for piano, hard and soft wire • High leverage giving exceptional cutting performance with minimum effort • The precision cutting edges are additionally induction hardened 63-64 HRC • Anti-corrosion treated. 1520 G

Serious trade Tools

7

mega

SALE

serious hand tools

109

129

6995ea

$

$

$

7pc Metric Ratcheting Spanner Set

14pc Ring & Open End Spanner Set - Metric

• 9, 10, 11, 12, 13, 14, 15mm 94-543 Also Available: 94-542 7pc AF Set Sizes 3/8 - 3/4” $69.95

• 14 metric spanners 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm. SCMT22210 Also Available: SCMT22410 13pc AF Spanners: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1” $159

7pc Jumbo Spanner Set • 7pc metric set: 24, 27, 30, 32, 33, 36, 38mm • Premium grade chrome vanadium steel • Full polish finish. 96-216 Also Available: 96-217 9pc AF 15/16, 1, 1-1/16, 1-1/8, 1-1/4, 1-15/16, 1-3/8, 1-7/16, 1-1/2" $169

16pc Metric Geared Spanner Set • 8mm to 25mm sizes • Handy storage roll • Reversible ratchet • Industrial quality 9602R

8pc Reversible Gear Spanner Set - Metric

159

$ 12pc Open End Ratcheting Set Metric

• Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm ratcheting open end wrenches. 85597 Also Available: 85599 8pc Open End Ratcheting Set AF 5/16", 3/8" 7/16", 1/2", 9/16", 5/8”, 11/16” & ≤" $109

• Reverse switch – no need to turn over spanner • Peripheral drive, 72 teeth – requires only 5 degree sweep • 13 degree offset head • Sizes; 8, 10, 12, 13, 14, 17, 18, 19mm K3017 Part No Description Price K3018 8pc - AF $129 K3019 12pc - Metric $179

129

$

BONUS 13pc AF Geared Spanner Set

249

$

9509R

3pc Dual Head Ratchet Reversible 4 in 1 • Dual sized ratcheting reversible heads • 72 (5°) tooth ratchet head assembly • Manufactured from tempered forged alloy steel with polished mirror chrome finish • Metric • 3 piece set • Head 1 sizes: 8 & 9mm, 12 & 13mm, 16 & 17mm.

Head 2 sizes: 10 & 11mm, 14 & 15mm, 18 & 19mm 301821 Also Available: 301820 AF 2pc set Head 1 sizes: 5/16" & 3/8", 9/16" & 5/8". Head 2 sizes: 7/16" & 1/2", 11/16" & 3/4" $39.95

22pc Combination Spanner Set

6250

$

• Metric/AF • Metric sizes: 8-19mm • Imperial sizes: 1/4"-15/16" • Mirror polish K3029

4995

$

from

1995

$

139

New Generation Adjustable Chrome Plated Wrench (Shifter)

7995

$

$

• 100mm • Performance exceeds standard specs • Optimised contact surfaces for max. user comfort • Contoured handle • Ergonomic worm screw • Improved ergonomics • 15º angled head • Tapered jaw tips for optimum access

Part No SCMT25150 SCMT25151 SCMT25152 SCMT25153 SCMT25154 SCMT25155 SCMT25156

Size 100mm 150mm 200mm 250mm 300mm 375mm 450mm

Price $19.95 $24.95 $29.95 $34.95 $39.95 $79.95 $129.95

69

$

13pc Screwdriver Set • Set contains 7 slotted blades, 1 insulated slotted blade, 4 phillips, 1 pozidrive screwdriver • PVC carry case has snap-in screwdriver fittings • Hang up holes for safe workshop storage • Australian made. CS13

13pc Torquemaster Screwdriver Set • 8 blade: 3 x 75mm - 9.5 x 250mm • 5 phillips: No.0 x 75mm - No.3 x 150m • Magnetic tips. 32064

8pc Industrial Thru-Tang Screwdriver Set • Slotted: 5x100, 6x150, 8x200, 10x250mm • Phillips®: #1x75, #2x100, #2x150, #3x200mm • High impact cellulose acetate handle • Square chrome vanadium steel blade with magnetic tip SCMT29110

Visit www.aisnational.com.au for your nearest store & more 8

355mm Aligning Bar

Dawn Power Bite Heavy Duty Bolt Cutters • High quality bolt cutters designed for constant use in the most demanding applications • Forged from highest durable Cr-V blade steel • Hard milled and additionally induction hardened cutting edges, which are exchangeable • Hardness of cutting edge approx. 60 HRC • Double cam precision bolt adjustment – blades can be adjusted individually • Heavy-duty side plates keep jaws aligned.

No blade skew even under severe loads Part No Size Price 57330 330mm $79.95 57400 400mm $89.95 $ 57460 460mm $119.95 57620 620mm $149.95 57780 780mm $199.95 57900 900mm $249.95

from

7995

2950

$

• Ideal for accurate positioning work • Line up end for aligning and adjusting metals or woods • Angled chisel end gives greater leverage when prying • Manufactured from the highest quality alloy and carbon steel • Fully heat treated shank for maximum strength and durability • Corrosive resistant black oxide finish 40000 Also Available: 40002 508mm $ 95 $34.95

24

from

1795

$

Pipe Wrench Cast Iron 455mm • Heavy Duty Cast Iron Housing • Drop forged jaws • I beam handle design for improved strength. 274103 Part No Size Price 274101 Wrench Pipe Cast Iron 250mm $17.95 274106 Wrench Pipe Cast Iron 300mm $25.00 274102 Wrench Pipe Cast Iron 350mm $29.00 274103 Wrench Pipe Cast Iron 450mm $45.00 274104 Wrench Pipe Cast Iron 600mm $75.00 274107 Wrench Pipe Cast Iron 900mm $139.00 274108 Wrench Pipe Cast Iron 1200mm $229.00

Self-Grip Adjustable Puller

• Through handle square shank with capped end • 1/4"x 8", 3/8"x 12", 7/16"x 18" and 7/16"x 24" sizes SP30839

from

2995

• Serrated cutting edge • High-leverage, compound cutting design cuts up to 18-gauge steel • Slip-resistant, bi-material cushion grip • Latch automatically releases with squeeze of handles • Left cut, right cut, straight cut • Cuts aluminium, sheet metal, vinyl siding, screening, cardboard, leather & copper. 14-559

• Sturdy and robust construction with telescopic advance feed mechanism for easy operation • Grooved guide rollers for easy cutting of flanged tubes, can cut close to the flare • Retractable steel reamer for deburring, which folds into body when not in use • Large adjustment steel knob for easy control of cutting pressure for clean straight cuts • Suitable for plastic, copper, aluminium and brass tubes • Separate spare wheel available for stainless steel tubes. 70335

69

$

24

$

Aviation Snips 3pc Set - Left, Straight & Right

Telescopic Tube Cutter 3 - 35mm

4pc Pry Bar Set

$

Heavy Duty Clamps with a Non Slip Device • Serrated and profile rail for additional strength and grip • Comfortable ergonomic two component handle Size Price Part No TG20-2K 200 x 100mm $24 TG30S12-2K 300 x 120mm $35 TG60S12-2K 600 x 120mm $50

79

32

$

$

• Self gripping, self centring and spring load action • Easily adjustable for either 2 leg or 3 leg format • High quality manufacture using the best high strength alloy steels, chrome finish on legs • Spring assisted action to ease the fitting of the puller to the work object • Slim designed legs for good access • Puller reach 90mm. 100310 Part No Size Price 100320 Puller Reach 150mm $95 100330 Puller Reach 200mm $109

General Purpose "C" Clamp • Nickel & chrome plated • Hardened Acme spindle • Swivel pad ensures even pressure is applied on angular workpieces • 100 (Span) x 50mm (Depth) • 900kg clamping force. ECBC-4 Part No Size Price ECBC-6 150mm X 75mm 1000kgp $38 ECBC-8 200mm X 100mm 1000kgp $52 ECBC-10 250mm X 115mm 1200kgp $62 ECBC-12 300mm X 125mm 1500kgp $79 ECBC-14 350mm X 150mm 1800kgp $105

Leatherman Supertool 300 Torque Wrenches • Click-stop type design with heavy duty cam for superior strength and durability • Robust slim style, reversible 24 tooth ratchet head and security locking handle mechanism for heavy duty applications • Supplied in individual custom moulded cases • 3/8" square drive. 301098 Part No Size Price 301099 1/2" square drive $59.95 301349 3/4" square drive $125

4995

$

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

• 100% stainless steel • 19 tools in one • Regular pliers • Needle nose pliers • Removeable wire cutters • 420 HC knife blade YL150L

99

$

Quick Action Lever Clamp

• Nickel & chrome plated forged steel • Ratchet type lever prevents overloading & resists vibration • For high pressure, fast action clamping purposes • 160mm (Span) x 80mm (Depth) • 300kg clamping force. ECG16L Part No Size Price ECG20L 200mm X 100mm 350kgp $59 ECG30L 300mm X 140mm 500kgp $79 ECG40L 400mm X 120mm 550kgp $89 ECG50L 500mm X 120mm 550kgp $95

Serious trade Tools

55

$

9

mega

serious hand tools

SALE

from

49

$

Thorex Nylon Hammer with Plastic Handle

95

• Chrome plated zinc heads with replaceable nylon faces • Used, due to the easily interchangeable heads, as a multi purpose striking tool in most assembly applications including engineering, furniture, shopfitting, partitioning, double glazing, injection moulding dies etc.

Part No Size Price TH710 32mm face 455gram $33 TH712 38mm face 680gram $38 TH714 44mm face 900gram $47

33

$

Hammer Solid Steel Curved Claw 20oz • Solid steel curved claw • Anti vibration technology built into handle • 2 piece co-moulded grip. SS20C

from

24

$

95

95

AntiVibe Ball Pein Hammers • Patented AntiVibe technology for greater vibration dampening effect • Forged, one piece steel construction for greater strength & durability • Top of head is machined flat to allow hammer to stand upright • Rim tempered striking • Molded textured rubber grip Part No Weight Price SCMT27440 225g $24.95 SCMT27441 450g $29.95

Part No Weight Price SCMT27442 680g $32.95 SCMT27443 900g $34.95

Contractor Grade Riveter • Heavy duty riveter comes with 4 nosepieces for 1/8”, 3/32”, 3/16”, 5/32” rivets • Rugged die-cast metal construction • Especially suited for stainless steel rivets in marine applications • Equipped with removable ejector spring. MR100CG

Hammer Dead Blow 40mm Face

• Heavy duty alloy body and head • Dead blow design reduces bounce back • Replaceable nylon heads • Made in Australia HU-777 Also Available: HU-778 Hammer Dead Blow 60mm Face $139.95

5pc 10" File Set

39

$

99

$

59

$

• Set of five files with handle • For filing flat surfaces, sharp corners and shoulders as well as for deburring • For filing holes, large fillets and concave surfaces • Contains one each of: hand bastard cut, hand second cut, square bastard cut, half round bastard cut, round bastard cut. 1-478-10-1-2

6pc FatMax® Thru-Tang Butt Chisel Set Twin Pack Hex Key Set • Ball tip allows a 25 degree angle insertion • Made from high torque protanium steel • ProGuard finish 5 x times more protection against rust • Life time warranty 20199

55

$

Dual Drive Podgers • Dual square drive heads • Designed for scaffolding and steel work applications • Heavy duty 32 tooth ratchet mechanism • Features stress relief drive on all socket heads • Manufactured from chrome vanadium steel with black oxide finish for additional corrosion resistance and durability Price Part No Description 321022 1/2" x 3/4" square drive $65 321023 3/4" x 1" square drive $83

from

65

$

54pc 10mm Shank Metric & AF Bit Set • Hex bits: metric - 4-14mm, AF - 5/32 - 9/16" • Star bits: length 30mm - T20 - T60 • Star bits: length 75mm - T50 - T60 • Tamperproof bits: T10 - T60 • Spline bits: M5 - M12 • 3/8" & 1/2" bit adaptors A13390

110

$

The right price & serious advice 10

• Contents: 6, 12, 18, 25, 32, 38 • Hardened, tempered high-chrome carbon alloy steel blade for edge retention • Precision ground blade is accurately sized and etched with blade size • Patented, ergonomically designed, bi-material grip handle is break resistant • Steel striking cap for use with steel-headed hammer 16-971

119

$

Parallel Pin Punch Set • Manufactured from hardened chrome vanadium steel • Owing to the hardened striking heads according to DIN standard, no splintering and 'mushroom' heads will occur • Set of six parallel pin punch set • Made in Germany 425170

3250

$

serious measuring tools

mega DEAL NEW UPGRADED LCD DETECTOR

Exclusive to AIS

799

Real Value

• Motorised auto levelling • Gradient matching technology • 500m diameter range • 2 year warranty • Includes heavy duty tripod, staff, remote control, dual receiver and durable carry case UL521P

299

$

• 26x magnification optics • 12 month warranty • Includes heavy duty tripod and staff • Reliably accurate • Comes in a hard carry case. OPTICAL1P

43

$

Auto Levelling Laser Level Package

• Includes LCD display receiver, clamp, wall/vertical mount bracket, carry case • Heavy duty tripod and staff included • Accuracy of 2mm/10m • 12 month warranty. AUTO1P

4995

$

Dial Indicator 0-10mm

Dumpy Level Package

449

$

$

Contractors Gradient Laser Package

• Complies to DIN 878 standard • Tungsten carbide measuring tip • Shockproof • Resolution 0.01mm • Dial diameter 58mm with flat back. MW-400-05 Also Available: MW-475-01 Magnetic base fine adjustment arm $49.95

Digital Slide Vernier 0-150mm/6” • Complies to DIN 862 standard • Water, dust & coolant resistant to IP54 standard • Resolution 0.01mm / 0.0005" • Jaw length 40mm • Large liquid crystal display. MW-110-15WR

89

• Two permanently fixed vials for lasting accuracy • Non fade, non leak, electrostatic stable vials for lasting accuracy • Suitable for normal and upside down measuring • Robust, shock resistant diecast frame • Milled measuring surface for improved accuracy • Supplied with belt holster. 02501 Also Available: 02511 Magnetic $49

315mm Measuring Wheel (MW-40M) • Durable traditional counter measuring wheel for best value • Gear driven counter with tough plastic housing • Working range: 9999.99 metres 77-174

• 400mm digital spirit level with 2 vials • Measures vertical, horizontal & diagonals 0-90° • Dimentions 416 x 50 x 21mm • Accurate : 0.2° • Powered by 2 x AAA batteries (supplied). PST-50080

39

995

1950

$ 8m Tylon Tape Measure

• Tylon Blade coating gives greater durability/wear resistance than lacquer • Matt finish blade reduces glare/reflection • Compact and ergonomic bi material case • Tru zero hook moves to compensate for accurate inside and outside measurements 30-393 Also Available: 30-394 Imperial 8m/26ft $9.95 ™

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

$

Digital Spirit Level

$

• Ideal for measuring mitre angles • Direct transfer of measured angles • Saves time and reduces waste • Ideal for all trades. 505A-7

99

$

25cm Diecast Trade Level 2 Vial with Belt Holster

180mm Mitre Protractor

9995

$

$

Sterling Professional Rubber Grip Tape Measure 10m • Double nylon coated matte finish blades for abrasion resistance • Extra thick blade material for superior life • Fully graduated mm markings for easy reading and to limit the 100mm syndrome • Super tough end hook with 4 inline rivets for extra strength • True zero to maintain accuracy • Also available in metric/imperial TBC1025

Serious trade Tools

11

mega

serious storage

E SALHOT Deal

299

$

ARGES FREIGHT CHPLY MAY AP

275

$

Upright Aluminium Truck Box - 900mm • Twin gas struts • 2.5mm gauge checkerplate aluminium welded construction • Rubber weather seal • T Handled single style locking system • Internal shelf • Concealed stainless steel hinge. 51036 Part No Size Price 51037 1200mm $649 51038 1450mm $699

Metal Mesh 2 Door Security Cupboard 1850 x 900 x 450mm

from

549

$

• Easy to assemble flat pack • Powdercoat finish • 5 adjustable shelves • Secure 3 point locking system and patio bolts • Strong metal door • All metal product 2DMSC

ARGES FREIGHT CHPLY MAY AP

BSC-900 - Industrial Storage Cabinet • 90 x 45 x 90cm (L x W x H) • 2 x shelves with 150kg load capacity • Powdercoated grey finish • Hinged doors and a 3-point key lock design • Designed to sit on top of T775 6 drawer tooling cabinet. T774

TC-900 Industrial Tooling Cabinet

649

$

Upright Aluminium Truck Box LOWSIDE - 1210mm • Twin Gas Struts • 2.5mm gauge checkerplate aluminium welded construction • Rubber weather seal • T Handled single style locking system • Internal shelf • Concealed stainless steel hinge. 51039

169 each

$ Aluminium Under Ute Tray Boxes

• 1.5mm gauge checkerplate aluminium • Stainless steel hinge • T-handle locking system • 2 chain stays • Rubber lid seal • Dual layer top for mounting strength • Suitable for front under tray fitment • 750 x 250 x 400mm Part No Description Price 51042 LHS $169 51043 RHS $169

• 90 x 45 x 90cm ARGES (L x W x H) • 75kg FREIGHT CHPLY MAY AP load capacity per drawer • Single key lock design for safe storage • Top drawer includes moveable plastic division boxes • Remaining drawers have adjustable 10 x steel dividers & 4 x slitted rails • Designed to suit T774 storage cabinet. T775

825

$

LP950

from

149

1195

359

$

$

$

4 Drawer Multi Storage Case • Steel construction • 4 friction slide drawer cradles (holds 4 multi storage cases) • Internal rear locking system - prevents drawers from accidently opening • 20 removable multi coloured storage tubs per drawer • Measurements: 410mm x 325mm x 300mm. K7612

LP1550

ARGES FREIGHT CHPLY MAY AP

from

189

$ Metal Lockers Low Profile Aluminium Boxes • Lower profile means more visibility from cabin • Made from 3003 grade 2.0mm aluminium checkerplate Part No Size Price LP950 950W x 600D x 500Hmm $359 LP1250 1250W x 600D x 500Hmm $449 LP1550 1550W x 600D x 500Hmm $599

60 Drawer Steel Parts Cabinet • 60 drawer steel parts cabinet. Overall size 880W x 400D x 1755Hmm. Drawer size 160W x 410D x 110Hmm • Cabinet will take 600kg total weight with up to 100kg per shelf and 10kg per drawer. NHD560

AIS gift vouchers - perfect for the trade professional 12

• Easy to assemble flat pack • Powdercoat grey finish • Padlock ready latch lock • Strength of steel • 1850 x 380 x 540mm Part No Description Price 1DLC 1 Door (with hanging $189

rod & shoe shelf) 2DLC 2 Door (with hanging rod) $199 3DLC 3 Door (no hanging rod) $209 4DLC 4 Door (no hanging rod) $219

mega DEAL from

1550

749

$

$

Sealed bearing slide

BONUS Ratchet Ring Spanner Set 9PRWS

Steel Truck Box Sealed Bearing Slides

Steel Truck Box 1770 Wide

• 2 large drawers with sealed bearing slides • T Handle keyed locking mechanism • Powder coated white gloss finish • 4 x heavy duty handles • 2 x gas struts Part No Description Price BKAT700 700W x 600D x 750Hmm $749 BKAT1210 1210W x 600D x 750Hmm $1049 BKAT1500 1500W x 600D x 750Hmm $1299

220

$ ARGES FREIGHT CHPLY MAY AP

• Powdercoated finish • Lifting handles on either side • 775 x 430 x 310mm (30” box) • 915 x 440 x 570mm (36” box). T736A

• 364kg capacity per shelf • Industrial 4 shelf rack with reinforced wire mesh • 1955 x 610 x 1830mm (L x W x H) • Silver corrosive resistant powdercoated finish • Adjustable grid pattern wire shelving S014

499

4495

$

$

5 Tray Cantilever Tool Box

TC-ITB-3036 - Industrial Tool Boxes - Set of 2

RSS-4WS Industrial Racking Steel Shelving

• Ultra tough for Australian conditions!

Weather proof with a powder coated white finish • Superb sealed bearing slide construction will take plenty of punishment (100kg per drawer). 4 large drawers • 2 gas struts for sealed lid, 2 internal shelves • T handle keyed locks • Provision for fork lift access • Ideal for mobile service personnel, mining & agricultural industries. BKAT1770

• Twin lids for easy access to tools • Full length piano hinges for extra strength • Heavy duty steel construction • Lever arrangement allows quick and easy access • Large trays for easy access OEL5TCB17

275

399

$

$

ARGES FREIGHT CHPLY MAY AP

49

$

18” Open Tote • Large side pocket for cable storage • Saw storage compartment • Rigid, waterproof plastic base. 1-93-951 Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

79

$ Back Pack on Wheels

• Durable and rigid construction • Telescopic transporting handle • Removable divider with multiple pockets for tools • Separate compartment for power tool or laptop 1-79-215

Steel Shelving Unit • 5 shelf steel shelving unit • Overall size 880W x 400D x 1755Hmm • Shelf unit will take 600kg total weight with up to 100kg per shelf • The NHD shelf unit is constructed from 1.4mm folded steel for extra strength and durability • Rear cross brace improves rigidity • Use in conjunction with the NHD560 for a fully flexible storage system NHD500

Premium 10 Drawer Top Chest • 665 x 405 x 490mm • Fat side handles • Auto return slides • Heavy gauge steel construction. SCMT50260

649

$

Premium 7 Drawer Roller Cabinet • 680 x 460 x 1000mm • Fat side handles • Auto return slides • Heavy gauge steel construction SCMT50257

3 Tier Tool Cart • Tough industrial hammertone powdercoat • Shelf thickness .08mm • Leg thickness 1.5mm • Four 3” metal/ rubber castors • Load capacity: 92kg • Tray depth: 76mm • 800W x 385D x 745Hmm K7071

95

$

Serious trade Tools

13

mega

SALE

serious generators HOT DEAL

2595

$

999

$

7kVA Honda Powered Welder Generator

8kVA Builders Generator with RCD

• Powered by reliable Honda GX390 engine • NSM alternator • 200Amp welder • 12 & 24V battery charger TP200W

• 15HP petrol motor • 8.125kVA peak output • Residual current device for safety • Open frame design with lifting bar • 2 x 240 volt power outlets • Genuine "Sensi" copper wound alternator. RPG8000RCD Also Available: RPG3000RCD 3kVA $549

599

1599

$

1899

$

$

2.5kVA Honda Powered Petrol Generator

5.9kVA Honda Powered Petrol Generator

8kVA Honda Powered Petrol Generator

• Powered by GX160 Honda engine • 3.6 litre fuel tank • Weighs 31kg TP25HSR

• Powered by GX340 Honda engine • Less than 6% harmonic distortion • Sturdy roll over frame. TP59HSR

• Powered by reliable Honda GX390 engine • NSM alternator • Ideal for running power tools. TP80HSR

serious air tools 3 Jaw Riveter Tool

1/2” Dr Impact Wrench

3/4” Dr Impact Wrench

• Torque: 600ft/lbs • Capacity: 16mm • Weight: 2.58kg • Length: 185mm • Air con-Max: 870L/min • Air con-AVG: 261L/min SP-1140EX

• Torque: 1100ft/lbs • Capacity: 25mm • Weight: 5.5kg • Length: 220mm • Air con-Max: 1080L/min • Air con-AVG: 324L/min SP-1158

279

$

850

$

• 8300Nm/air over hydraulic • 4 nose sizes 5/32" (4mm), 3/16" (4.8mm) 7/32" (5.5mm) 1/4" (6.4mm) • Easy setup • Low maintenance • 3 jaw clamping chuck for increased grip & extended jaw life SP-2305 Also Available: SP-2307 5/32" to 1/4" all materials $299

199

$

Needle Descaler 1/4" Medium Die Grinder • Safety lever throttle • Variable speed • Std collet: 1/4" • Collet options: 6mm, 1/8", 3mm • Free speed: 22,000rpm SI-2011S

169

$

50mm Quick Change Disc Sander • 50mm rubber backing pad for Ez-Ioc discs • Variable speed • Free speed: 17,000rpm SI-2201R

We're serious about customer service 14

145

$

• 4400brpm • 19x3mm needles • 500L/min max, 250L/min average air consumption • Replacement needles are available. SXJ268

179

$

serious cleaning power

3750

$

Poseidon 3-30XT Cold Water High Pressure Cleaner

Neptune 2-26 Hot Water High Pressure Cleaner

• Portable single phase electric • Compact, upright design • In built chemical injector with dosage regulation • 2175 psi pressure • 11L/min water flow • Full ceramic pistons 301002950

• Electric single phase hot water • EcoPower boiler with >92% efficiency • Robust 2800 RPM long life pumps with ceramic pistons • 2100 psi pressure • 10L/min water flow • Optimum safety with flue gas sensor 107145008

FREE Sludge Sucker P240 Petrol High Pressure Cleaner

3790

• Powerful 3500 psi @ 15L/min • Powered by a genuine Australian Honda GX390 engine • Full stainless steel roll frame for long life • Pnuematic tyres for easy movement • Standard with trigger gun, stainless steel twin lance and 10m high pressure steel braid, non marking hose • FREE sludge sucker - ideal for clearing drains, pits and pools quickly and easily. BMPBP240

1890

$

$

Domestic Petrol Pressure Cleaner Honda Powered • Compact & portable domestic petrol pressure cleaner • Ideal for the garage and around the home where 240V power is not handy • Honda GC160 OHV petrol engine • 2500 psi @ 9 l/min • Comet Italian Axial pump, with brass head • Supplied ready to work, with 7.5m hose, gun lance kit, low pressure chemical injection kit, quick change nozzles BAR2550X-H

Semi Professional Cold Water • New compact & powerful semi professional electric pressure washer • Made in Italy by Comet • Ideal for around the home or small workshop • 2175 psi max pressure with 9.0 l/min water flow • Brass pump head for long life • High pressure hose reel with 12m hose • Professional lance & gun kit • Low pressure chemical pick up with 1.8L tank • Turbo nozzle for greater impact • Inbuilt storage for gun and lance KT1800 Extra

899

Domestic Electric Pressure Washer • Max 2175psi (working 1450) max flow 6.8l/m • Supplied with all of the accessories ready to clean, including a floor cleaning tool • On board storage of detergent • A must have for every garage!

H3360

899

$

$

259

$

serious cleaning & janitorial NEW

79

$

Fresh Eucalyptus & Pumice Hand Cleaner Dispenser Intro Pack • Includes industrial dispenser with 2 year warranty • 2 x 1.25Lt fresh hand cleaner dispenser refills • 100% Aussie made & owned • Fresh hand cleaner refills (820LR) available - 6 per carton. 820LINT

2095

55

$

$

2Lt Fresh Pumice Hand Cleaner Pump Pack • Contains fine Italian pumice and eucalyptus oil and skin conditioners • Cleans grease, oil, paint, adhesives, sap, etc • Deodorises too! 820F Also Available: 820J 20kg dispenser with pump $119

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

Euca Laundry Powder • 10kg bucket with bonus 2kg (12kg total) • No fillers • No synthetic perfumes or petrochemical surfactants • Very economical, less than 15c per wash! • Commercial formulation to clean hard working clothes. 106VFFT

1250

$

500ml Barrier Cream Pump Pack • Quick drying • Silicon free solvent resistant & non-greasy • Wax-based cream • Insulates the hands against harsh soils and smells. 055C Also Available: 055A 125ml Tube $6.95

2495

$

4495

$

Degrease It 5Lt • Heavy duty concentrate • Quick break • Biodegradable • Solvent & phosphate free • Penetrates and emulsifies grease, oil and dirt. ADDI5 Also Available: ADDI20 20Lt $74.95

Serious trade Tools

Orange Scrub 5Lt • Citrus based hand cleaner • Contains pumice • Waterless • Removes ingrained soils, grease, oil, dirt and mud • Contains lanolin and moisturisers to prevent dry skin. IH0S5

15

mega

serious lubrication

SALE P3 Powerlube 20kg Grease Kit

SEE PAGE 27 TO WIN

2 Drum

1175

$

189

$

• Helps to create a OH&S compliant workplace environment • Compatible with most forklifts and pallet trucks • Non-skid removable deck • SJ-100-002 - 2 drum, sump capacity of 236L • SJ-100-006 - 4 drum, sump capacity of 242L Part No Description Each SJ-100-002 2 Drum Spill Containers $599 SJ-100-006 4 Drum Spill Containers $679

109

29

$ Plastic Drum Pump Economy

SEE PAGE 27 TO WIN

• Suits 450g cartridges and bulk-filling • Fitted with block nut and air release valve • Comes with 1000mm flex extension 4 jaw coupler • Battery charger, 2 x batteries and shoulder strap • Develops up to 51,700 kPa (7,500 psi) • Delivers up to 50g/min in free flow. L-BG18V

mega DEAL

• Pistol-grip type action to suit 450g grease cartridges, bulk filling or by J3 transfer pump loading • Delivery pressure up to 68,900kPa (10,000psi) • Includes 230mm flexible extension & KY supergrip coupler. K29-01

35

100

$

$

300ml Workshop Oiler - Rigid Spout • Sturdy ergonomic heavy duty zinc diecast bowel • Twin brass ball valve pump enables use in the normal and upside down position • Anti drip rim. 03903 Also Available: 03905 500ml $39

Rotary Vane Fuel Pump with Hose • Supplied with 2” bung nut, 3 piece suction tube, 1.8m delivery hose & nozzle • Delivers up to 20Lt/min, or 5Lt per 20 turns • Suitable for diesel, kerosene & mineral oils to SAE90 • Wetted materials - steel, cast iron and NBR (Nitrile) L-RPH

79

$

Real Value

1195

$

SEE PAGE 27 TO WIN

• Hand operated oil pump for most 20L drum sizes • Supplied with 1.2m PVC hose with anti-kink spring • Pump length 380mm • Suitable for mineral oils up to SAE90 L-DP20J

K29 (450g Cartridge)

400L Diesel Fuel Storage & Dispensing Kit • Lockable lid aids diesel fuel security and protects dispensing kit • Heavy duty, robustly constructed polyethylene tank • 12V diesel fuel pump capable of flow rates of up to 50 L/min • Built in nozzle holster • Fully assembled dispensing kit ready for use • Dimensions: 1165mm (W) x 1165mm (D) x 566mm (H) L40040PA

• Flow rates of up to 100 L/min • Ideal for the transfer of diesel, fuel, petrol and kerosene • Includes 2.4m of UV and fuel resistant hose, metal nozzle holster and bung adaptor • 10 micron filter prevents contaminants from entering vehicle and machinery engines 5060A

$

SEE PAGE 27 TO WIN 18V Battery Pistol-Grip Grease Gun

$ Bi-Lobe Refuelling Drum Pump

100 Series 2&4 Drum Spill Containers

• Delivery pressures up to 68,900 kPa (10,000psi) when used with the B2 booster gun • 50:1 ratio grease pump for 20kg or similar size pails • 1/4" air inlet / 1/4" fluid outlet • Can be operated from as little as 3cfm air supply • Suitable for underground coal mine applications. P3-01C

C

397

599

$

70

450g Lever Action Grease Gun • Develops grease pressures of up to 12,000psi • Delivers up to 1.6g of grease per stroke • Three way loading • Plastic wing nut enables the rigid extension to be locked at the required angle • Patented ever-flow system enables the gun to be used with thick tacky greases even in the coldest conditions • Large diameter piston with a long lever travel facilitates high volume greasing. 600A

Retracta Air/Water Reel Spring-Rewind

SEE PAGE 27 TO WIN

• Fitted with 15m x 10mm i.d. reinforced PVC hose • Operation pressure up to 1700 kPa (250psi) • 3/8" BSP (F) reel inlet and 1/4" BSP (M) hose outlet AW2150 Also Available: AW2121 Air/water 15m x 12.5mm i.d. Reel $285

Visit www.aisnational.com.au for your nearest store & more 16

SEE PAGE 27 TO WIN

220

$

serious compressors

mega DEAL

2360

$

P17 Petrol Under & Over Air Compressor • Free air delivery @ 100PSI: 350LPM • 6.5HP Honda motor • Pump RPM: 1061 • 5Lt air receiver tank • Warranty: 5 year pump, 3 year motor 00128UO

PHP40 Industrial 3 Phase Compressor • Free air delivery @ 150PSI: 760LPM • 7.5HP 3 phase motor • Maximum PSI: 175PSI • Pump RPM: 746 • Ams draw: 10.2 • 3 cylinder, cast iron, slow reviving pump • 150 litre air receiver • Warranty: 1 year total unit. 00071

2599

Real Value

3365

$

999

1599

$

$

$

P14 Electric Belt Driven Compressor

PV25 Petrol Compressor • Free air delivery @ 100PSI: 545LPM • 9HP Honda engine • Pump RPM: 1158 • 2 cylinder, slow revving, cast iron pump • 68 litre air receiver • Max PSI: 145 • Warranty: 3 year pump, 3 year Honda. 00561

Petrol Compressor • 3 Cylinder cast iron pump • GX160 5.5HP Honda engine • 70Lt tank • 349 LPM free air delivery • Solid wheels. TB-5570P

245

• Free air delivery @ 100PSI 275LPM • 2.75HP, single phase 10Amp motor • Pump RPM: 852 • Amps draw: 9.4 • Max PSI: 125 • 55 litre air receiver • Warranty: 5 year pump, 1 year motor 00257

1069

699

$

$

$

Compact 2500 Electric Direct Drive

Compact 5000 Electric Belt Drive Compressor

• Free air delivery @ 100PSI: 154LPM • 2.5HP, single phase 10Amp motor • Pump RPM: 2850 • 30 litre air receiver • Amps draw: 8 • Max PSI: 145 • Designed for handyman use • Warranty: 1 year total unit. 00332

• Free air delivery @ 100PSI: 235LPM • 2.5HP, single phase 10Amp motor • 40 litre air receiver • Amps draw: 9 • Max PSI: 145 • Pump RPM: 1160 • Warranty: 3 year pump, 1 year motor 00334

99

P17 Electric Belt Drive Compressor • Free air delivery @ 100PSI 320LPM • 3.2HP, single phase 15Amp motor • Pump RPM: 963 • Amps draw: 13 • Max PSI: 145 • 55 litre air receiver • Warranty: 5 year pump, 1 year motor. 00087

3495

$

699

$

$ 2.5HP V-Twin Cast Iron Compressor

Mega Grunt Heavy Duty 4x4 Compressor

Tradeflex Fitted Air Hose

• Twin cylinder delivers more air when you need it • Inflates 4x4 tyre (10R.15) from 15psi to 32psi in approx 1min! • 150psi – Max 85LPM. GC400

• Conforms to AS 2554 class B • 10mm x 20m blue PVC air hose with nitto type couplings • Flexible at low temperatures • Other couplings are available. TFA1020

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

• 225L/min FAD • 240V / 10Amps XRV14 Also Available: XRV17 3.0HP, 251L/min FAD, 240V / 15Amps $799

Serious trade Tools

17

mega

serious WELDING GEAR

E SALHOT Deal

89

1390

$

3900

$

$

200 Amp TIG/Arc Welder

Hobart 23 Gasless 4.5kg Spool MIG Wire • Self-shielding wire for general purpose MIG welding of mild steels • Ideal for windy outdoor conditions • Suitable for galvanized steels • Save on gas bottle rental • Easy to remove slag. S222308-022

• Adjustable down slope • 2T / 4T trigger function • Adjustable pulse control • HF start AC/DC TIG function • Digital amperage display • Adjustable pre gas - post gas KUMJR200AC/DC

949

450

$ Clearmaster Fume Extractor

Plasma Cut 40

• 3 metre arm • 360° self supporting pivoting arm • 4 stage filtering system for increased filtering • Includes activated carbon filter to reduce odours • Guarantees a filter separation of 99.997% • Single phase (1ph) 978002

• Latest inverter technology • Light industrial application • Euro torch connection • High quality Italian plasma torch • HF contact arc start. KUPJR40

Uni-Flame Oxygen / Acetylene Gas Cutting & Welding Kit • Heavy duty tool box • 1 x oxygen regulator • 1 x blowpipe • 1 x acetylene regulator • 1 x cutting attachment plus much more. KKOXY1

Butane Powered Soldering Iron

2 Axis Welders Clamp • Machined outside faces: useable for upright joints • Quick acting screw button for faster set up • Stand-off increases access • 95mm mitre joints, 122mm jaw length, 62mm T-clearance WAC35D Also Available: WAC45 2 axis welders clamp. 121mm mitre joints, 135mm jaw length, 100mm T-clearance $259

Gecko Fillet Welding Carriage • 4 wheel drive with magnetic base allows for vertical welding • Torch holder mechanism for different types of MIG/MAG torches with diameters of 16-22mm • Constant and repeatable travel speed with closed loop speed stabilization system enables weld bead geometry that is exact to the required specifications WA-GECKO

Austarc 16TC Low Hydrogen Electrode

175

$

• Smooth running, low hydrogen electrode • All positional (except vertical down) • Ideal for maintenance, construction and mining applications • Excellent operator appeal • Low spatter levels • Grade 4 high quality weld deposits with exceptional weld toughness and crack resistance Part No Size Price 16TC25 2.5mm 2.5kg pk $41 16TC32 3.2mm 2.5kg pk $58 16TC40 4.0mm 5kg pk $55

3495

$

The right price & serious advice 18

$

from

41

$

• Piezo ignition - self igniting • Kit includes: 1 x soldering, hot blow and cutting tips • Torch flame facility.

Equivalent to 10 to 60W • Replacement tips available • Refill with butane refill; Weller BR200 $ PSI100K

155

5999

$

Bobcat 250 Engine Drive (Petrol) • Smaller and up to 24kg lighter • Up to 33% quieter than previous models • 250Amp, DC 100% & 225Amp AC @ 100% duty cycle multi-process welder designed for maintenance and fabrication applications - Stick, MIG & TIG! • 11,000W of 240V auxiliary power • Typical equipment that can be powered includes: air compressors, pumps, flood lights, circular saws, hand drills and grinders • 3 year warranty • Made in U.S.A. MR90700003-1

mega DEAL Weldmatic Fabricator 400 Amp MIG Welding Package

1299

1049

$

$

MIG 250 Inverter

MIG/MMA/TIG 190

• Latest IGBT inverter technology • Multifunction inverter: MIG TIG MMA • Spool gun ready • Digital voltage & amperage meters • Voltage reduction device (VRD) • Geared wire drive • Comes with MIG torch, arc leads, twin gauge, argon regulator and gas hose. KUMJR250

• Latest IGBT inverter technology • Multifunction inverter - MIG - DC TIG (with lift arc ignition) - MMA • Spool gun ready • Digital voltage & amperage meters • Voltage reduction device (VRD) • Geared wire drive • Comes with MIG torch, arc leads, twin gauge, argon regulator and gas hose. KUMJR190

• Ideal for vehicle manufacture, ship building, aluminium and stainless steel construction and the full range of steel fabrication • Runs all popular sizes of solid and flux-cored wires • Digital amp and volt meters for precise set-up • 30 voltage steps for fine arc control • Suits gas shielded and flux-cored wires. CP135-1

3990

$

Weldmatic 270 270 Amp MIG Welding Package • Suits light industrial applications, fabrication, maintenance, rural workshops and hire fleets • Fillet weld up to 12mm of mild steel, stainless or aluminium • Feature packed 4 roll drive wirefeeder • Low, easy to access gas bottle tray • Fan-on-demand • 3 year gold shield warranty, including parts & labour. CP132-1

2345

$

TIG 180P/HF • High frequency DC TIG ignition • Down slope time adjustment • Post gas time adjustment • Multiple pulse mode • Excellent ARC stability • Over voltage and thermal overload protection KUMJR180P

879

$

NEW

Auto Darkening Welding Helmet

Red Welders Jacket

• Viewing area: 96 x 42mm • Helmet 9-13 variable • UV/IR protection: UPDin 13 • Adjustable sensitivity • Adjustable reopening delay 0.1-0.9 sec • Suitable for MIG, TIG and MMA welding • 12 month warranty UMAFH-2

• High quality red cow split leather • Kevlar stitched to increase resistance to heat, cuts and abrasion • Staggered double studs to ensure secure fit • Moderate heat protection • Sizes S-3XL WJ(size)

Titanium 9400i Auto-Darkening Welding Helmet

99

$

• Exclusive InfoTrack technology to track arc time • Integrated grind shield - 180˚ field of view while grinding • Aluminium heat shield protects the lens in high amperage applications • Complies with high impact AS/NZS 1337.1 & ASNZS 1338.1 • 3 year warranty (auto-darkening lens only). 256177

449

$

8495

$

Vortex Welding Respirator with Digital Elite Helmet • High impact rating ANSI Z87.1-2003 • Adjustable air flow settings – 160 & 200 litres/min • Lithium-ion battery charges in 3 hours • Audible & vibration alarm • Lightweight blower unit design and back harness. 236001

1190

$

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

Mini Angle Magnet • 36kg breakaway force • Set angles - 45° and 90° 4932352808

35

$

Mini Multi Angle Magnet • 36kg breakaway force • Set angles - 45°, 90° and 120° 4932353809

Serious trade Tools

40

$

19

mega

serious safety gear

SALE

Assembled Browguard with Visor • Anti-fog, extra high impact visor • Already assembled • 99.9% UV protection BGVC

Frontier Respirator - P2 Non Valved

Box of 20

24

$

• Contour fit • Easy breathing/speaking • Twin elastic headbands • Adjustable nose bridge for snug fit • Comfortable foam nose seal. FR7710 Also Available: FR7712 Valved (Box of 10) $14.90

90

Profile² P2 ReadyPak (Medium) • Soft skin friendly TPE face piece for maximum comfort • Pre-filter cover to protect against sparks, splash and contaminants • Packed in a resealable plastic storage container • Certified to AS/NZS 1716:2012. 032173ANZ

49

3195

$

$

1kg ABE Fire Extinguisher

2495

• 1kg dry chemical powder extinguisher FB10ABE

$

1250 ea

$

Pack of 6

5995

$

Vented Hard Hat - White • Lightweight • 6 point ProLock harness • Cotton sweatband • Extended peak HHV6-W

Protector First Aid Kit (75pc) C Compliant

2495

$

• Ideal for the home or car • Weather resistant nylon bag • Easily customised to suit your workplace OH&S requirements • Kit contains 75 pieces. FAKTK

Ninja Ice Glove

Ninja Glove • 15-gauge fashion grade nylon shell • Hydropellent technology™ coating • Treated with actifresh® to kill bacteria • Sizes XS-2XL P4001.size

450ea

$

Pack of 12

45

$

2495

$

Fire Blanket • 1.8m x 1.2m • Certified & approved to AS/NZS 3504 FB18X12

Riggamate Cow Grain, Premium, Beige Riggers Glove

• Two–layer insulated liner provides warmth with flexibility • HPT™ for soft, durable, flexible coating that repels liquids for a firm wet or dry grip • Vibration absorption • Soft and flexible in temps as low as -50 deg C/50 deg F • Treated with Actifresh® kills bacteria, promotes freshness • Sizes – M – 2XL P4004.size Also available: P4004HV Hi-Vis Yellow

850ea

$

Pack of 12

85

$

• Wing thumb • Stitch-free palm • Premium leather Part No Size CGL41AS S CGL41AM M CGL41AL L CGL41AXL XL CGL41A2XL 2XL

495ea

$

Pack of 12

55

$

Frontier Egard Tradie Earmuff • Trade quality hearing protection • Padded headband for comfort • 24dB • 3 position headband-head, behind head, under chin. Ideal when wearing hard hat, respirator or visor • Simple adjustable cup positioning H100

10

$

95

Python Earmuff

29

$

• Class 5, SLC 80 31dB • High performance and strong durability for maximum protection • Hearing protection for noise levels to 116dB(A) • High quality ear cushions. EMPYT

$ Egard Disposable Earplug

• Class 5, SLC80 29db • Soft PU foam for comfort • Hi-Vis colour to identify wearer compliance Part No Description Qty Each 2 Boxes H001 Un-corded Box 200 $39.50 $60 H001C Corded Box 100 $39.50 $60

AIS gift vouchers - perfect for the trade professional 20

Per box

3950

95

mega DEAL NEW Hi-Vis Orange Heated Jacket with Charger & Battery

Hi-Vis Rain Suit Jacket & Pant Set • PVC/Polyester with elastic cuffs plus studs • Two large pockets • Hood with drawstring • Sizes S-5XL RSHV(size)

1290ea

$

Pack of 10

Pack of 6

109

119

$

Safety Vests - Orange with Reflective Tape (for Day/Night Use) • Hi-Vis orange • Reflective tape for night use • H back tape formation • Sizes S-4XL SVO(size)-AS

• Water and wind resistant • Easy touch heat controller • Increase blood flow to the muscular areas which helps reduce stiffness • Expandable pocket to accept larger batteries for extended run times • Superior run times: 1.5AH battery provides up to 6 hours of continuous heat • Also available in yellow • S-4XL. M12HJVISO Also Available: M12HJHIGHVISY/O Hi-Vis orange & yellow heated jacket S-4XL $179

2200 ea

$

49

$

259

$

$

Orange Hi-Vis Traffic Cone 450mm

1195

99

$

• High quality orange PVC • 450mm height • Sold individually TC450

$

ARGES FREIGHT CHPLY MAY AP

Spillfix Transport or Workshop Universal Spill Kit

Extruded Fort Barrier Mesh

• Smaller kit that can be hung, carried or stowed in vehicle • Includes: universal organic absorbent booms, pads, waste bag, dustpann & broom, gloves, instruction card, MSDS. FXSKBAG Also Available: FXSKMED 120Lt Universal Spill Kit $329

• Heavy duty safety fence designed for long term use • Quick and easy to install • Roll up and re-use time and time again • Roll size is 0.90m x 50m • Highly UV stabilised TM-MESHP

1290ea

1090

$

1995

$

$ Hurricane Black Frame Smoke Lens

Prism Positive Seal Clear Lens

Rush Twilight Frame / Lens

• Featuring an EVA 'positive seal' to maximize protection in dusty environments • Very light weight (30 grams) including the dust gasket • Single piece, optically correct, 8 base and distortion free lens • 'ALS' anti-fog/anti-scratch coating on both sides of clear, smoke and bronze lenses. 1614401PS Part No Description Price 1614402PS Smoke Lens $12.90 1614404PS Bronze Lens $12.90

• Adjustable PVC nose bridge plus comfort bars in the temple arms • Ultra light weight • Built in brow protection • Single piece, optically correct, 9 base and distortion free lens • 'ALS' anti-fog/ anti-scratch coating on both sides of lenses • Fully recyclable: all polycarbonate frame with no metal parts. 1652310 Part No Description Price 1652301 Clear Frame / Lens $10.90 1652302 Smoke Frame / Lens $10.90

• Lightweight, contoured frame with a velvet finish over hydrated nylon • Replacement lens options • 'ALS' anti-fog/anti-scratch coating on both sides of clear and smoke lenses 1662202 Part No Description Price 1662201 Black Frame Clear Lens $19.95 1662203 Black Frame Silver Flash Lens $23.95 1662204 Black Frame Blue Flash Lens $23.95 1662207 Blue Frame Blue Flash Lens $23.95 1662209 Bronze Frame Silver Flash Lens $23.95 1662214 Black Frame Light Smoke Silver Flash Lens $23.95 1662215 Black Frame Green Polarised Lens $69

3995

$

2995 ea

390ea

$

$

Pack of 2

50

$ Mack® B-Double Safety Specs

• UV400 filter for 99.9% UV protection outdoors • Polarised smoke lens for ultimateglare protection and clarity • Medium impact protection with shatterproof lens • AS/NZS 1337.1:2010 Standards approved • Includes cleaning cloth • Black / Silver. ME503 Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

Pack of 12

Multi-Purpose Safety Specs

39

$

• Clear lens • Medium impact • Contoured face wrap design • Eye hugging curves • Anti-fog lens • Smooth streamlined finish • Anti-scratch lens • AS/NZS 1337.1.2010 standards approved. FE001 Also Available: FE002 Smoke

Mack Tradie Boots • Sizes: 4-16 • Half sizes 5.5-11.5 • TPU outsole heat resistant to 150°C / 302° F • Slip & water resistant • Lightweight • Steel toe cap • EVA sock • Black only. MKTRADIE-BBF

Serious trade Tools

21

mega

serious workshop gear

SALE HOT DEAL Infrared Diesel Heater 15kW • Instant heat • Radiant heat • Dust free • Compact and portable • Incorporated fuel tank VAL6-DAYSTAR

198

499

$

$

1895

$

TCS-450 Swivel Truck Crane

ARGES FREIGHT CHPLY MAY AP

Industrial Diesel Fan Heater 20kW (200m2)

Quartz Radiant Heater Pedestal 2000W

• Instant heat • Compact and portable • Incorporated fuel tank • Efficient operation. IDH-20 Part No Description Price IDH-30 30kW (300m2) $799 2 IDH-50 50kW (500m ) $949

• 3 heat settings • Quartz heating element • Pull cord for safe operation • Vertical tilt adjustment • Odourless ICH2P Also Available: ICH2W Wall mount 2000W $154

150mm Fabricated Offset Vice

NEW

• Can be fitted to the back of a ute or truck • Heavy duty construction • 450kg & 230kg lifting positions • 360 degree working angle • Safety hook A353

198

449

$

$

Portable LPG Heater • 20kW output • Light weight and portable • LPG connection hose and regulator included • 240V 10amp power supply • Easy ignition • High visibility finish. IGH2-20

• For all heavy duty work • Manufactured from steel plate • Australian designed 'Offset advantage' allows work on long vertical sections with the full width of the jaws without obstruction from the main body of vice • Corrosive resistant screw • Replaceable case hardened jaws • Precision machined bearing surface. 60320 Also Available: 60318 100mm $255 60319 125mm $365 60321 200mm $875

379

$

21pc Hydraulic Puller Kit

BONUS Extra Blade

• 10t capacity • 3 leg sizes • Large bearing separator • 2 sets of extension legs 10702

299

59

$

$ Workshop Vice • 100mm jaw opening • Cast from close grained grey iron. 1TON-E-B

1520/100 Heavy Duty Linisher

7" Industrial Bandsaw • Horizontal & vertical cutting bandsaw • 0° to 45° swivel vise • 1 HP, 240V motor • Fully adjustable hydraulic down feed with separate on/off valve & automatic shut-off at end of cut • 180mm cutting capacity at 90° • Bandsaw comes complete with blade. UE712A

1395

$

• Belt grinding attachment fitted to a continuous rated 1.1kW (1.5 HP) TEFC motor and mounted on a pedestal • IP65 rated switchgear fitted which includes thermal overload and no-volt release • Longer rubber contact wheel life with air grooves for cooling • Easy belt tracking with no tools required • 1520 x 100mm belt size 1520/100/P3

We're serious about customer service 22

1299

$

1220/100 Heavy Duty Linisher • 2HP single phase motor • 1220 x 100 belt size • Bench or pedestal mount (pedestal included) • Fully guarded • Adjustable height • Simple tracking & belt change 1220/100/P1

599

$

mega DEAL Pro 35 Magnetic Base Drill • Quality, compact & robust european made machine • 35mm diameter, 52mm depth cutter capacity • Lightweight, only 10kg • Ideal for onsite & overhead tasks HMPRO35

1459

$

HP-50 Workshop Hydraulic Press

1149

$

BONUS 7pc 25mm Cutter Set

• 50 tonne capacity • Manual/hydraulic operation • Spring return on ram • Includes pressure gauge • Winch for table rise & fall • Complete with V-blocks P148

1904006025

ARGES FREIGHT CHPLY MAY AP

Piccolo Magnetic Drill

1089

$

• 1100W motor • 12mm – 40mm core drill capacity • 106mm – 191mm height adjustment • Speed: 450 RPM. • 8000N magnetic adhesion • 132mm stroke • Warranty – 12 months • Includes: transport case, safety strap and coolant unit. 18500

8” Bench Grinder

429

$

BONUS

8” Bench Grinder with Multitool

14, 18 & 22mm Cutters + Pin

®

• #362 belt grinding attachment mounted on the Abbott & Ashby 200mm industrial bench grinder • 915 x 50mm belt size • 600W, 3/4HP powerful induction motor. PO362PLUS8

99

• Complete with light • Heavy duty design for workshop application • 3/4HP motor • 550W • Warranty: 1 year total unit. 00271

$

mega DEAL

ARGES FREIGHT CHPLY MAY AP

6545

$

BONUS 3Mt x ER32 Collet & Chuck Set C922B

ARGES FREIGHT CHPLY MAY AP

459

$

1049

$

1516B Bench Drill

2020P Pedestal Drill

• 3/4 HP motor • 16mm chuck size • 16 speed • 2 morse taper • Warranty: 3 years 00298

• 1 1/2HP motor • 20mm chuck • #3 Morse taper • 432mm swing • Drill hole size 3 -18mm • Warranty: 3 years 00295

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

HM-46 - Mill Drill Geared & Tilting Head (240V) • 1.5HP 240V motor • 3MT spindle, 6 speeds (95-1600rpm) • Gear driven head • Tilting head to ±90º • Includes: drill chuck, 3MT arbor, 3MT-2MT drill sleeve, multi-point facing cutter, safety cutter guard & stand M123/M135A

Bonus Lathe Kit L0077 and Live Centre C052

2266

$

AL-540A Centre Lathe • 356 x 1000mm •2-Axis DRO system & quick change toolpost • 2HP 240V motor • 8 spindle speeds • Powered longitudinal & cross feeds • Includes: 3 & 4 jaw chucks, faceplate, steadies, foot brake, & coolant system. L187D

Serious trade Tools

23

mega

serious workshop gear

SALE

69

99

$

69

$

$

Stainless Steel Fastener Kit - Grade 304 & 316 • 52 sizes, 210pc • Machine screws and nuts: pan, countersunk and phillips head • Self-tapping screws: pan, countersunk and phillips head • Hex head set screws and nuts. Metric ISO • Nuts Hex, standard and self-locking. Imperial and metric • Washers: flat, spring and panel. CA214

Split Pins

Imperial 'O' Rings • 70 shore nitrile • 32 sizes: 1/8" to 2" I.D • 407 pieces • Replacement packs available. CA407

25

20 Litre Wet & Dry Vacuum Cleaner

36

$

$

89

$

• Stainless steel tank • 1200 watt motor • Accessories: floor nozzle, dust brush, crevice nozzle • Suction hose length: 1.5 metres. K15020 Also Available: K15035 30 Lt Wet & Dry vacumn cleaner $149

Polished Stainless Steel Piano Hinge

Folding T Handle

• Imperial & metric sizes • Zinc plated • 10 sizes: 1.6mm to 4mm dia. incl. 7/64" & 9/64" dia • 795pc • Replacement packs available. CA800

• SS304, no holes • 1.2mm thick • 38mm open width • 1,800mm length LLH-123818SS-POL

• Stainless steel • Cam latch • For use on steel, wood or fibreglass doors. 10502SS

SERIOUS OUTDOOR GEAR 2.2cu.ft (65Lt) Tradesman Cement Mixer

179

69

$

• 1/2HP x 1400RPM Motor with adjustable motor mount • Single pulley and belt driven • 14" puncture proof wheels • Welded frame and welded bearing tipping arm • 2.3cu.ft (65Lt) steel bowl with 25mm shaft $ WMC2.2 Also Available: WMC3.5DP 3.5cu.ft (100Lt) Tradesman cement mixer $1249

$

Steel Contractors Wheelbarrow

2400mm Clamped Handle Screed

• Heavy duty steel wheelbarrow • Side pneumatic tyre with heavy duty steel rim • High capacity 100Lt 1.0mm thick tray W800S-HSGWAS

695

189

• Reverse handle for extra life • Fitted with end plugs and powder coated for ease of clean up. C24 Also Available: C15 1500mm Screed $55 C18 1800mm Screed $59

349

$

12V Broadcast Spot Sprayer - 60Lt 12V Spot Sprayer - 37Lt • 12V - 3.8L/min • Maximum pressure 40 PSI with auto shut off • 4.5 metre PVC hose • Spray gun shoots a stream up to 4 metres. K16000

1099

$

• 8.3L/min • Maximum pressure 70 PSI with auto shut off • 4.5 metre PVC hose • Spray stream up to 4 metres • Broadcast spray width - 4.88 metres, overlap - 30cm. K16001 Also Available: K16002 12V Broadcast/Spot Sprayer - 98Lt $429

$

MasterFinish Handyvibe • Powered by a genuine Honda GX35 4 stroke motor • Ergonomic designed handles and shoulder strap • 44mm vibrating needle. HV44E

Visit www.aisnational.com.au for your nearest store & more 24

serious electrical

89

99

$

229

$ Battery Charger 40Amp with Jump Start Function

• 40Amp charge - 180Amp start • Suit 12 & 24V batteries • 20-400Ah batteries. RBC400

• Portable power block - 4 outlet, each with individual double pole on/off switch • Rating 240V 10Amp 2400W • Inbuilt residual current device (RCD) safety switch to protect against electric shock, trip current 30mA • Overload protected 10A - manual reset function. PB94 Also Available: PB96 Heavy duty 10Amp 4 way IP44 safety switch $119

Powerflood Light 500W

• 2 x 500W linear tungsten tube included • 240V power point plug-in • Weather resistant, die cast aluminium construction with safety grille • Adjustable metal tripod folds away for storage convenience • Height 1.8 metres • Professional workmans light. HL19

• 500W linear tungsten tube included • 240V power point plug-in • Weather resistant, die cast aluminium construction with safety grille • Adjustable stand • Can be wall mounted. HL12

79

Gun mount and pressure tail switch included

Portable Power Block Safety Switch 4 Outlet

Twin Halogen Floodlight 2 x 500W

$

$

Led Lenser MT7 • 210 lumens • Max beam dist range - 255m • AFS (advance focus system) • Tactical glass breaker switch • Remote pressure tail switch ZL8307TG

30 LED Telescopic Work Light • 30 LED work light with 1W flash light • Innovative pull-out design extends from 22cm to 33cm • Lithium battery • Power: 3W, Output: 300 lumens • Complete with 240 and 12V chargers plus an end hook • Work time 4-5hrs, full recharge 5-6hrs. PST-75575

29

$

69

$

SERIOUS PAINT & Adhesives Super Etch Primer

from

• A one-pack epoxy etch primer with excellent adhesion • Anti-corrosive • Suitable over most metals, including mild steel, brass, copper, lead, stainless steel, zincanneal, chrome, aluminium, and galvanised iron • Can be left uncoated for up to 3 months before the application of a top coat colour Price Part No Description EP400 Aerosol Can 400 grams - Grey $9.90 $18.90 SEP1 1Lt - Grey $59.90 SEP4 4Lt - Grey $249 SEP20 20Lt - Grey

990ea

$

95 69ea 00 ea

$$

Structural Primer

Artline 400XF Paint Markers

• Top quality zinc phosphate primer • Very fast drying, anti-corrosive • Used for the protection of structural steel in general industrial, commercial and farming environments • Ideal over bare steel or previously painted surfaces • Available in 400gm press pack, 1Lt tin, 4Lt tin, 20Lt tin Price Part No Description 3260G1 1Lt - Zinc Phosphate $14.90 $39.90 3260G4 4Lt - Zinc Phosphate

• Bullet nib with a 2.3mm line width • Xylene free • Can withstand up to 100°C temperature exposure • Fast drying • Valve action for controlled ink flow • Fade proof QTY/Pk Price Part No Description Size 140033 White 2.3mm Bullet Tip 12 $69.95 140007 Yellow 2.3mm Bullet Tip 12 $69.95 140001 Black 2.3mm Bullet Tip 12 $69.95

All Rounder Roller Kit 230mm • Heavy duty cage frame 230mm • Premium polyester roller sleeve 12mm nap 230mm • Durable plastic roller tray 230mm. 1685 Also Available: 7762 270mm kit $13.90

7

$

90

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

Duct Tape 48mm x 30m Silver • Made from PVC to provide excellent $ 95 stretch, conformability ea and durability • Ideal for joining plastic sheets Pack of 36 • Strong adhesive for $ quick and reliable attachment AT099589 Also Available: AT225320 Duct Tape 48mm x 30m Black $4.95each

4

129

Sikaflex - 221 • Premium one part polyurethane industrial adhesive / sealant • 310ml. 90392 Black Part No Description Size 90396 221 White 310ml 90398 227 Black 310ml 90382 227 White 310ml

Serious trade Tools

1595ea

$

25

mega

SALE

serious material handling

7995

$

349

$

from

135

$

3G Industrial Manual Chain Blocks 1800kg Trolley Jack • Complies with Australian Standard AS/NZS 2615:2004 • Capacity: 1800kg • Lift height: 254mm. K12061 Part No Description Price K12060 1350kg $59.95 K12062 2000kg $229

3000kg Trolley Jack - Low Profile • Complies with ANSI standard • Heavy duty • Low profile designed for lowered vehicles • Lifting range: 100 - 550mm K12067

99

Part No 500103M 500203M 500303M

• Complies to AS1418.2 & CE approved • Colour coded to match international lifting standards • Lift height 3m • Other capacities & configurations available Capacity Height Colour Price 1000kg 3m Violet $135 2000kg 3m Green $198 3000kg 3m Yellow $249

from

1490

$

$

Truck Ratchet Assembly Black Rat Snatch Strap Kit • Black Rat snatch strap kit c/w 9m x 60mm snatch strap 9000kg, 2 x 3.2t safety bow shackles, 1 pair of premium leather rigger gloves. 342304BHK

mega DEAL

• Rubber handle • LC500k & LC1500k • Bubble pack • Hook & keeper Part No Size Price 25mm x 5m $14.90 349025RB 35mm x 6m $16.90 349035RB

650

25ea

$

Pack of 5

from

490

$

Part No Description 50mm wheel - 30kg capacity R2709 Rigid, nylon wheel S2708 Swivel, nylon wheel S2708B Swivel, nylon wheel, with brake R2711 Rigid, institutional rubber wheel S2710 Swivel, institutional rubber wheel S2710B Swivel, institutional rubber wheel, with brake 75mm wheel - 50kg capacity R3709 Rigid, nylon wheel S3708 Swivel, nylon wheel S3708B Swivel, nylon wheel, with brake R3711 Rigid, institutional rubber wheel S3710 Swivel, institutional rubber wheel S3710B Swivel, institutional rubber wheel, with brake 100mm wheel - 70kg capacity S4709 Rigid, nylon wheel S4708 Swivel, nylon wheel S4708B Swivel, nylon wheel, with brake S4711 Rigid, institutional rubber wheel S4710 Swivel, institutional rubber wheel S4710B Swivel, institutional rubber wheel, with brake

50mm x 9m Ratchet Tie Down

Price

95

$

• 2500kg lashing capacity • Complies to AS/NZS 4380-2001 • Complete with hook & keeper and 2 x wear sleeves RTD055PL

$4.90 $5.90 $8.90 $5.50 $6.50 $9.50 $7.50 $8.50 $11.50 $7.90 $9.50 $12.50 $10.50 $12.50 $15.50 $9.50 $11.50 $14.50

219 each

229

$

$

Grade 80 Double Leg Chain Sling Air/Hydraulic Bottle Jack 20,000kg • Maximum height: 510mm • Hydraulic lift: 160mm • Adjustable height: 85mm • Air pressure: 90-120psi • Air fitting: 1/4” NPT • Net weight: 16.3kg. 2026

The right price & serious advice 26

• WLL indicator stripes • Complies to AS1353-1997 Part No Size Price FS-2-1000X1 1000kg x 1m $6.50 FS-2-1000X2 1000kg x 2m $9.90 FS-2-1000X3 1000kg x 3m $13 $ FS-2-2000X1 2000kg x 1m $9.90 FS-2-2000X2 2000kg x 2m $15.50 FS-2-2000X3 2000kg x 3m $18.90 FS-2-3000X1 3000kg x 1m $15 FS-2-3000X2 3000kg x 2m $24 FS-2-3000X3 3000kg x 3m $29

from

R

Plate Mount Castor Wheels

Double Ply Flat Slings

• Complies to AS3775.1-2004 • Pre-tested & supplied w NATA test certificate, stainless steel safety tag & re-usable PVC bucket & lid Clevis Self Locking Hooks with 2 Shortening Grab Hooks • 8mm • 3m length • 3500kg. CSA082345 Clevis Sling Hooks with Safety Latches • 10mm • 2m length • 5500kg. CSA102225

Serious ladders

189

mega DEAL

159

$

$

8-13ft (2.4-3.9m) Extension Ladder Alum 150kg Industrial

6-11ft (1.8-3.3m) Alum Dual Purpose Ladder, 150kg Industrial

• Single rope pull & release • Strong roll-locked D-rungs • Stabiliser ready • 150kg industrial EL8/13-I Part No Size Price EL10/17-I 10-17ft (3.1-5.3m) $229 EL12/21-I 12-21ft (3.7-6.5m) $269

• Converts from A-frame to straight ladder in seconds • Cross-braced spreader for premium stability • Patented resin bracing system • Stabiliser ready • Non slip alum treads • 150kg industrial DM006-I Also Available: DM007-I 7-13ft (2.1-3.9m) $189

Buy a selected, specially marked Bailey Fibreglass Ladder between 11th February 2013 and 30th June 2013 and receive $75 cash back*. *Refer to www.baileyladders. com.au/cashbackpromotion for details.

339

$

179

$

265

$ 4ft (1.2m) Platform Ladder Aluminium 150kg Industrial

• 900mm hand rail meets OH&S requirements • Non-slip treads & platform surface • Patented resin bracing system • Wheel kit ready • 150kg industrial. PL004-1 Part No Description Price PL005-1 5ft (1.5m) $279 PL006-1 6ft (1.8m) $329 $509 PL008-1 8ft (2.4m) PL-WKIT Wheel Kit Set $119

8-3ft (2.4-3.9m) Extension Plank Alum 260kg Industrial • Aluminium box section • 6 size planks in one compact design • Telescopic - increments of 300mm • Non-slip alum surface • 260kg industrial. PLANK01-C Also Available: PLANK01-I450 8-12ft (2.4-3.5m) 450mm Wide $275

Before Cash Back Fibreglass 150kg Double Sided 4 (1.2m) Stepladder

• Australian made and owned • Punchlock® tread design and deep fascia top caps increase torsional rigidity, strength and stability of the overall ladder frames • Anti-slip rubber 'boots' for maximum grip on any surface and protection of the stiles • Strong, fibreglass construction with triangular plate bracing • Electro – Safe™ • UV stabilised coating prevents sun damage and fibreglass rub-off. FS10484 Part No Description Price FS10485 Fibreglass 150kg Double Sided 6 (1.8m) $449* FS10487 Fibreglass 150kg Double Sided 8 (2.1m) $619* * Before Cash Back

Purchase Macnaught Gear at AIS and go into the draw to win

5 PRIZE PACKS TO BE WON! • A Rod and Reel Combo worth $250 • Camp Chair worth $50

Terms & Conditions • All AIS accounts who purchase Macnaught products during the promotional period are automatically entered into the promotion.

• The promotion will run for a period of 2 months from 1st May to 30th June 2013 (hereinafter referred to as the “promotional period”) • The promotion closes at 7PM on 30th June 2013 E.S.T. • All eligible customers will be divided into the following AIS sales regions: QLD and NT, NSW-VIC and TAS, SA, WA. • All eligible purchases of Macnaught and Lubemate branded products will be identified by our part numbers, the promotion does not include Macnaught Flow Measurement products.

• For the AIS branches end users customer, there will be a draw done on the 19th of July 2013 on the premises of Macnaught Sydney office. • The major prize includes the following: • A Rod and Reel Combo approximate value $250.00 • Camp Chair with Macnaught Logo approximate value $50.00 • Fishing Lure approximate value $10.00 • Coola can 40L fridge approximate value $495 • NSW Permit Number LTPS/13/02072 • Full terms and conditions are available on the website: www.macnaught.com.au/ais

• Coola Can 40lt Fridge worth $495 • Fishing Lure worth $10

Prices include GST and may vary in store. Freight charges may apply.

Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

Serious trade Tools

27

serious trade value

89

1995

$

99

$

$

24 Piece 1/2” Drive Socket Set - Metric & AF

300mm (12") Black Adjustable Wrench

• 9 metric sockets • Standard: 10, 12, 13, 14, 15, 16, 17, 18, 19mm • 11 AF sockets • Standard: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1” • Spark plug: 5/8” • 4 socket accessories. SCMT14110

• 34mm wide adjustable mouth opening • Chrome vanadium steel with a black matt finish • Exceeds standard specifications ISO 6787, DIN 3117, NF E 74-324 and ASMEB 107.8m-199 SCMT25180

8” Bench Grinder • Complete with light • Heavy duty design for workshop application • 3/4HP motor • 550W • Warranty: 1 year total unit. 00271

HOT DEAL

299

$

BONUS

125mm (5") Angle Grinder 5pc Carbide Burr Set

• 2400W 230mm angle grinder • Speed: 6,600RPM, auto stop carbon brushes • Marathon motor - extends tool life • Deadman switch • 3 position rotatable rear handle • 3 position vibratech anti-vibration top and side handle AU60750000

Leatherman Freestyle Multi-tool • Stainless steel body • Zytel handle insert • Regular pliers • Needlenose pliers • 420HC combo knife • Wire and hard wire cutters • Removable pocket clip • Warranty 25yrs YL831121

95

NEW

109

$

K29 Flexigun® (450g Cartridge)

SEE PAGE 27 TO WIN

• Pistol-grip type action to suit 450g grease cartridges, bulk filling or by J3 transfer pump loading • Delivery pressure up to 68,900kPa (10,000psi) • Includes 230mm flexible extension & KY supergrip coupler. K29-01

Safety Harness Roofers Kit • Conforms to AS/NZS 1891.1 • Kit includes: Gorilla safety harness • Adj energy absorbing lanyard • 15m fall arrest line • Anchor strap • Screwgate karabiner • Comes in premium backpack. GH001

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

www.aisnational.com.au

249

$

îs. 26690

49

$

89

$ • Cylinder, cylinder with radius top, ball, tree with radius top and oval egg burrs • 1/4" shank. SP31380 Also Available: SP31385 5pc Carbide Burr Set (suits Aluminium) $89

230mm (9") Angle Grinder