multi action wall bracket pull out, swivel and tilt large LCD/plasma mount model - AB-LU703MA
tv fixing kit c - m4 x 20mm d - m5 x 20mm e - m6 x 20mm
x4
f - m8 x 25mm
x4
g - m4 i - m6 h - m5 j - m8
x4
k - m8 m - m5 l - m6 n - m4
x4
o - m5 x 12mm
x4
1
attach screen fixing uprights to screen
a
b
c-nx4
c x2 ? read these instructions carefully before installing your equipment. ? install the wall bracket in a suitable location using fixing which are appropriate for the wall
material and structure. consult a qualified builder if you are in any doubt as to the structural integrity of the wall. ? do not attempt to alter or modify any part of the wall mount or it's attachments. ? do not use if any parts are broken or appear to be damaged. ? tighten all bolts and fixings securely. only use fixings provided with this bracket. ? do not mount your tv near to sources of heat or moisture. ? always have a minimum of two persons to install the wall bracket and tv.
SMARTFIT installation helpline 0845 6029217
2
attach bracket to wall
3
position 1
set tilt angle
a
b position 1 (5º) position 2 (10º)
thread insert on inside
position 3 (15º)
ox4
position 4 (20º)
hole on outside
Warning! Do not adjust tilt with tv hanging on wall bracket, always remove tv from bracket first.
note: for ease of installation mount bracket on wall using position 1 and mark other positions using a spirit level. then remove fixing from position 1, remove bracket and drill other positions fix bracket to wall using wall fixing points from outside inwards to help keep bracket level during installation. use fixings suitable for your type of wall construction. use all available fixing points if in any doubt of the suitability of the wall, it's construction or what type of fixings to use, consult a qualified builder or installer.
4
5
attach tv to bracket
a
attach wall plate trims
b x2
ox2