corner wall bracket corner mounted swivel and tilt large LCD/plasma mount model - AB-LU711C
tv fixing kit c - m4 x 20mm d - m5 x 20mm e - m6 x 20mm
x4
f - m8 x 25mm
x4
g - m4 i - m6 h - m5 j - m8
x4
k - m8 m - m5 l - m6 n - m4
x4
o - m5 x 12mm
x4
1
attach screen fixing uprights to screen
a
b
c-nx4
shelf fixing kit
p - M6 x 12mm
x4
q - M5 x 12mm
x8
c x2
? read these instructions carefully before installing your equipment. ? install the wall bracket in a suitable location using fixing which are appropriate for the wall
material and structure. consult a qualified builder if you are in any doubt as to the structural integrity of the wall. ? do not attempt to alter or modify any part of the wall mount or it's attachments. ? do not use if any parts are broken or appear to be damaged. ? tighten all bolts and fixings securely. only use fixings provided with this bracket. ? do not mount your tv near to sources of heat or moisture. ? always have a minimum of two persons to install the wall bracket and tv.
SMARTFIT installation helpline 0845 6029217
2
3
attach bracket to wall
set tilt angle
position 1
a
b
position 1 (5ยบ) position 1
thread insert on inside
ox4
position 2 (10ยบ) position 3 (15ยบ) position 4 (20ยบ)
hole on outside
note:: ? for ease of installation mount bracket on wall using position 1 and mark other positions using a spirit level. then remove
fixing from position 1, remove bracket and drill other positions ? fix bracket to wall using wall fixing points from outside inwards to help keep bracket level during installation. ? use fixings suitable for your type of wall construction. ? use all available fixing points ? if in any doubt of the suitability of the wall, it's construction or what type of fixings to use, consult a qualified builder or
warning:! do not adjust tilt with tv hanging on wall bracket, always remove tv from bracket first.
installer.
4 px4
attach shelf hangers
5 0x2
attach TV to bracket
6 qx8
attach shelves to bracket
note: ? if you are only using one shelf, use the bottom shelf fixing points. ? if you are installing both shelves then install top shelf first to gain better access to fixing screws. ? make sure shelf hanger fixings are tight and hangers are level before installing shelves
x2
7
shelf adjustment
note: ? loosen (do not remove) corresponding screws to adjust shelf positions as shown (below). ? make sure all screws are tightened once positions have been finalised and before adding TV and equipment. ? DO NOT LOOSEN SCREWS OR TRY TO ADJUST SHELF POSITIONS WITH EQUIPMENT ON SHELVES. THIS COULD RESULT IN DAMAGE TO SHELVES, EQUIPMENT OR THE BRACKET.
a
8
b x4
a b
attach wall plate trims