MODEL: ABRD800-BLK ASSEMBLY INSTRUCTIONS
IMPORTANT INFORMATION! 1) Before starting assembly please take time to familiarise yourself with the instructions and the components listed on the back page, as this product could be unstable if incorrectly installed. 2) Do not place hot or cold items against or in close proximity to any glass surface unless an adequately thick insulating material is used to prevent such items coming into contact with the glass. 3) Do not strike the glass with hard or pointed items. 4) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary; do not use washing powders or other substances containing abrasives as these may scratch the glass. 5) Do not sit or stand upon horizontal glass surfaces. 6) In order to maintain a high quality finish, when cleaning wooden panels please use a soft cloth with a suitable furniture polish if required. Please Note: Total maximum load for this support should not exceed 100Kg. This support must be assembled in accordance with these assembly instructions. Maximum load for the top glass shelf is 100Kg. Maximum load for cabinet top shelf is 30Kg. Maximum load for cabinet shelf is 50Kg. Alphason Designs Ltd. accepts no liability for any damage caused through incorrect or inappropriate use of this audio visual support.
Alphason Designs Limited Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK Tel: +44 (0)1942 885600 Fax: +44 (0)1942 876955 info@alphasondesigns.com
www.alphasondesigns.com
issue AI-01 03/08
These assembly instructions are designed to help you assemble this product with ease. Please take time to read through this document thoroughly before commencing construction. A breakdown of the individual components in the flap-hinge assembly is given to the right.
1.
w
FLAP-HINGE n COMPONENT DETAILS
i - Hinge (use in Stage 9.)
• Attach hinge body (part ii from flap-hinge assembly n ) to base panel A using screws o .
w
o
• Attach side panels B and C and back panel to base panel using large wood screws v .
C n A v
o x6
w x6
v
p
w
x6
STAGE 2 • Attach flap-stay screws s .
D
• Insert cams w into holes in side and back panels ensuring that the arrow on the cam points to the outside edge of the panels (see diagram below).
o
n
v
iii - Connecting Screw (use in Stage 10.)
STAGE 1
D
B
ii - Hinge Body (use in Stage 1.)
2. to left-hand side panel using
p
• Ensure the flap-stay plate (arrowed) is fitted in the orientation shown. The flap-stay arm must be rotated FRONT during assembly to OF UNIT allow screw fixing.
s
2a.
s x4
3.
STAGE 3
F x
• Insert wooden dowels
F
x
into holes in base panel.
• Locate internal side panels E over wooden dowels in base panel and push into position. Please ensure that the holes for the shelf pegs are facing the inside of the unit.
E E
• Insert wooden dowels into holes in top of internal side panels.
x
• Locate small back panels panels.
x
F
into grooves in side
x8
issue AI-01 03/08
STAGE 4 • Screw metal dowels y into holes in cabinet top panel G . Take care not to overtighten.
4.
y
y G
y x6
STAGE 5
5.
• Assemble cabinet top panel (from Stage 4) to cabinet assembly from Stage 3. Ensure all wooden dowels locate correctly and tighten all cams.
STAGE 6
6.
• Carefully position the assembled cabinet on its back on a clean flat surface to avoid any damage.
H I
z z
• Attach left-hand leg H and right hand leg I to assembled cabinet using short screws z . Attach large plastic feet t to both legs.
t
• It is important that the legs are correctly positioned - the hole (arrowed) in each leg should be located at the top rear of the legs when assembled onto the unit (see diagram to the right).
7.
t z x4
STAGE 7
TOP OF UNIT
bb
• Carefully turn the assembly over to rest on its front.
J
• Attach metal back panel J to cabinet assembly using long screws aa , and nuts bb . Screws aa can be inserted through the cable tidy hole on the rear of the unit.
aa
u u
aa
• Firmly attach small plastic feet of the metal back panel.
bb x4
x4
u
into the bottom
issue AI-01 03/08
STAGE 8
8.
• Turn the cabinet assembly over so that it rests on the plastic feet. • Insert shelf pegs cc into desired hole positions in cabinet side panels.
cc
• Carefully insert glass cabinet shelf rests securely on shelf pegs.
K
K
ensuring it
cc x4
9.
STAGE 9 • Carefully place door (with glass front) clean flat surface to prevent damage.
L
• Attach hinges i from flap-hinge assembly door using screws o . • Attach door plate
q
o
on a
n
to door using screws
L
q
to
s
.
s
o x6
10.
s
x2
STAGE 10 • Attach door assembly from Stage 9 to cabinet assembly using connecting screws from flap-hinge assembly n . • Before attaching the flap-stays, ensure that when the door is in the closed position the top edge of the door correctly aligns with the cabinet top shelf. • To acheive this, adjust the large and small screws in the centre of the flap-hinges. One screw needs to be loosened and the other tightened depending on the direction of the adjustment required. See illustration below.
issue AI-01 03/08
STAGE 11 • Using connecting screw door plate.
r
, attach flap-stay to
11.
• The braking force of the flap-stay may require adjustment. This can be achieved by turning the screw arrowed clockwise to tighten the movement or anti-clockwise to loosen the movement. Use screwdriver gg supplied to achieve this.
r r
STAGE 12
12.
M
• Locate top glass shelf M into legs and metal back panel. It may be necessary to loosen screws securing the legs onto the cabinet during assembly.
dd jj
• Secure glass top shelf in place with screws dd . • Ensure the screws securing the legs to the cabinet are fully tightened if it was necessary to loosen them during assembly of the top glass shelf.
jj
dd
• Attach self-adhesive cable tidy clips panel in positions shown.
jj
to back
x4
STAGE 13 • Attach self-adhesive plastic buffers ee to cabinet top shelf in positions shown. • Congratulations your cabinet is now complete!
13.
ee ee
ee x2
issue AI-01 03/08
MODEL: ABRD800-BLK CERTIFICATE OF CONFORMITY C O M P O N ENT
DESCRIPTION
QTY
A
BASE PANEL
1
B
LEFT SIDE PANEL
1
C
RIGHT SIDE PANEL
1
D
BACK PANEL
1
E
INTERNAL SIDE PANEL
2
F
SMALL BACK PANEL
2
G
CABINET TOP PANEL
1
H
LEFT-HAND LEG
1
I
RIGHT-HAND LEG
1
J
METAL BACK PANEL
1
K
CABINET SHELF
1
L
DOOR (WITH GLASS FRONT)
1
M
GLASS TOP SHELF
1
Kit No.
issue AI-01 03/08
C O M P O N ENT
DESCRIPTION FLAP HINGE ASSEMBLY
QTY 2
n
(SEE COMPONENT DETAILS AT TOP OF 1st PAGE)
o
FLAP HINGE SCREW
12
p
FLAP-STAY
1
q
DOOR PLATE
1
r
CONNECTING SCREW
1
s
FLAP-STAY SCREW
6
t
LARGE PLASTIC FOOT
2
u
SMALL PLASTIC FOOT
2
v
LARGE WOOD SCREW
6
w
CAM
6
x
WOODEN DOWEL
8
y
METAL DOWEL
6
z
SHORT SCREW (25mm)
4
aa
LONG SCREW (32mm)
4
bb
NUT
4
cc
SHELF PEG
4
dd
TOP GLASS SHELF SCREW
4
ee SELF-ADHESIVE PLASTIC BUFFER
KIT No.
310015
310016
310017
2
ff
ALLEN KEY
1
gg
SCREWDRIVER
1
hh
SPANNER
1
jj
SELF-ADHESIVE CABLE TIDY CLIP
2
310018 issue AI-01 03/08