AUDIO VISUAL SUPPORT MODEL: AD2/105-s & AD2/105-PB
ASSEMBLY INSTRUCTIONS
Model shown: AD2/105-s
�
BEFORE STARTING THIS ASSEMBLY PLEASE TAKE TIME TO FAMILIARISE YOURSELF WITH THE COMPONENTS LISTED ON THE BACK PAGE
Alphason Designs Limited Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK Tel: +44 (0)1942 885600 Fax: +44 (0)1942 876955
www.alphasondesigns.com
issue 03 10/05 181718
1.
STAGE 1
A
• Place top glass shelf (thicker glass) on a clean flat surface to prevent scratching. Insert metal top cap through all four small holes.
e
e
i
e
h A
h
h
i
over four threaded • Assemble tube end plugs rods and onto glass. Ensure recessed side of tube end plug is against glass.
i
h
h
h
RECESSED SIDE OF TUBE END PLUG i .
i x4
x4
2.
STAGE 2
C
over threaded rods • Fit long tubes on to tube end plugs .
i
i
e
n
and
n i
over threaded rods and • Fit tube end plugs locate into long tubes .
C
C
B over threaded rods & on i . • Insert plastic spacers n over rods and into holes in glass shelf B . • Locate glass shelf to tube end plugs
n
n
i
B
i
C
C
i C
n
i x4
3.
x4
STAGE 3
D
D
i
i
i
D i
e
• Remove nuts and washers from threaded rods and screw into four top caps . Tighten by hand.
i
e
i
h
• Fit tube end plugs over threaded rods with recessed side against glass shelf. • Assemble short tubes locate tube end plugs
D
D
i
over threaded rods and into tube ends.
i
n
i x4
x4
issue 03 10/05 181718
STAGE 4
4.
g j g
j
into short • Insert flat foot mouldings tubes. Please ensure that flat foot moulding is securely inserted.
f
j
j
f
g
f
j
over threaded rods and • Fit washers secure assembly with M8 half nuts . Tighten using box spanner .
g
o
f
g f
TAKE CARE NOT TO OVERTIGHTEN THE ASSEMBLY
j
g
f x4
5.
x4
x4
STAGE 5 • Carefully turn assembly over so that it rests on foot mouldings .
j
l
A
• Insert short cable tidy moulding large hole in top shelf .
l
• Insert long cable tidy mouldings large hole in glass shelf .
k
A
k
B
B
firmly into
firmly into
k
l x1
x2
6.
STAGE 6
m k l
• Cable tidy cover can be 'snap-fit' over cable tidy mouldings & to hide cables once equipment is installed.
l
• Once installed, the cable covers can be rotated through 360° to allow easy access for cables.
k
m
issue 03 10/05 181718
MODEL: AD2/105-s & AD2/105-PB
CERTIFICATE OF CONFORMITY COMPONENT
QTY
DESCRIPTION
A
TOP PANEL
B
SHELF PANEL
C
LONG TUBE
4
D
SHORT TUBE
4
e h
AD2/105-s - 141099 AD2/105-PB - 141111
AD2/105-s - 141089 AD2/105-PB - 141112
ROD
f
WASHER
g
HALF NUT
TOP CAP
�
PACKED BY
1
1 PRE-PACK AD2/105-s - 200269 AD2/105-PB - 200240
4 4
i
TUBE END PLUG
12
j
FLAT FOOT MOULDING
4
k
LONG CABLE TIDY MOULDING
1
l
SHORT CABLE TIDY MOULDING
1
m
CABLE TIDY COVER
1
n
PLASTIC SPACER
4
o
BOX SPANNER
1
This document is your guarantee that the product has reached you in the highest of quality standards. Should you have any cause for complaint please return this document with your correspondence to the address given at the bottom of the front page. issue 03 10/05 181718
MODEL: AD2/105-s & AD2/105-PB
PRE-PACK PDI COMPONENT
QTY
DESCRIPTION
C
LONG TUBE
D
SHORT TUBE
e
105260
105055
ROD
f
WASHER
g
HALF NUT
111334
h
TOP CAP
i
TUBE END PLUG
j
FLAT FOOT MOULDING
PACKED BY
4 4 4 4
202161
AD2/105-s - 202120 x3 AD2/105-PB - 202224 x3
202182
12 4
k l
LONG CABLE TIDY MOULDING
1
SHORT CABLE TIDY MOULDING
1
m
LONG CABLE TIDY COVER
AD2/105-s - 202216 AD2/105-PB - 202245
n
PLASTIC SPACER
o
BOX SPANNER
AD2/105-s - 180329 AD2/105-PB - 180341
202217
129101
1 4 1
This document is your guarantee that the product has reached you in the highest of quality standards. Should you have any cause for complaint please return this document with your correspondence to the address given at the bottom of the front page.
issue 03 10/05 181718