2022-23 Redback Audio Product Guide

2022-23

Product Guide redbackaudio.com.au

Professional Audio Products Proudly manufacturing in Australia since 1974.

Made Here Since 1974.

Head Office

174 Roe St, Perth WA 6000 (08) 9428 2122 wsale@altronics.com.au

Sydney

15 Short St, Auburn NSW 2144 (02) 8748 5399 nsw@altronics.com.au

Melbourne

891 Princes Highway, Springvale VIC 3171 (03) 9549 2199 vic@altronics.com.au

Brisbane

4/18 Riverland Drive, Loganholme QLD 4129 (07) 3441 2899 qld@altronics.com.au

Adelaide

316 Main North Road, Prospect SA 5082 (08) 8164 3460 sa@altronics.com.au

International distribution enquiries welcome.

Contents Amplifiers Mixer Amplifiers Power Amplifiers Hearing Loop Amplifiers Mixing & Paging Solutions UTP Signal Connection Audio Sources Message Players Paging Systems Desk Mixers Signal Converters PA Mixers Source Control System Automation Level Controls Line Monitoring Timers DIN Rail Products

6-12 12-15 16

18-19 20 21 22-26 27 28-29 30-33 34-39 40-41 42-43 44 45-46 46

Fire & Evacuation Timer & Evac Controller 48 Fire Evacuation Controller 49 Lockdown Controller 50 Timer/Lockdown/Fire Controller 51 Fire System Accessories 52-53 Battery Backup 54

Microphones UHF Wireless Microphones Body Worn Microphones Handheld Microphones Desk & Lectern Microphones Microphone Accessories

56-59 60 61 62-63 64-67

PA Speakers Horn Speakers Pendant & Ball Speakers Column Speakers Sound Projectors Wall Speakers Subwoofers PA 100V Drivers One-Shot Ceiling Speakers Fast-Fix Ceiling Speakers Surface Mount Speakers

69-73 74 75 76 77-79 79 80 81-82 83-85 86-88

Fire Speakers One-Shot Ceiling Speakers Horn Speakers Sound Projector Surface Mount Speakers

90-92 93 93 94

IMPORTANT NOTE:

This is a short form product catalogue. For the complete range of Altronics products consult the full annual catalogue or visit our website at altronics.com.au

1

About Redback.

Since 1974 we have been manufacturing public address products in Perth, Western Australia. Whilst many of our competitors have shifted production off shore we take pride in supplying the pro audio industry with innovative Australian Made product, offering superior performance, reliability, warranty & long term service support.

Our close cooperation with leading sound system contractors has enabled us to incorporate many distinctive sought after features not always available with imports.

We include comprehensive parts and labour warranty of 10 years on Australian made Redback audio products with 5 years on PA speakers.

Our History In 1974 Jack O’Donnell founded a company with the aim to bid for West Australian government tenders for public address systems. This work gradually grew into a full manufacturing operation for “Redford” amplifiers and speakers. Upon moving to new premises on Roe St in 1986, the brand was relaunched as “Redback”. The production department has grown over the years to occupy a huge floor area, employing a team of assembly builders.

We have resisted the temptation to move offshore by offering better quality and more innovative products. Our Perth manufacturing facility produces most of the Redback audio & One-Shot speaker ranges. We strive to support local suppliers wherever possible in our supply chain, helping Australia’s manufacturing industry.

A Leading Innovator We have always strived to innovate within the public address audio industry, aiming to solve the problems of installers and consultants to reduce installation time. The One-Shot speaker revolutionised the way ceiling speakers are installed into ceiling tiles. The latching snap-fit design installs in seconds, securing the speaker in place without the need for screws or clips – saving countless hours of installers time and money.

At the time of release, the One-Shot speaker & grille combination was the fastest to install in the world, and we are confident to this day that no other design has bettered it. We have since gone on to sell over 3 million units of the One-Shot!

Redback amplifiers and mixers have also undergone a steady evolution as trends within the public address industry have emerged. The aim of Redback’s designers has been to allow set up of all features without the need to lift the lid, making it easy for changes in set up after the amplifier has been bolted into the rack.

We remain confident that Redback’s long term performance and reliability, together with our industry leading warranty, more than compensate for any additional cost over quite often inferior imported products.

2

Why choose Redback? 

 

Local manufacturing

Building innovative ideas

We manufacture most of the Redback audio range in Perth, Western Australia.

Our most innovative features come from customer feedback.

Local technical support Our in-house service department has over 120 years combined industry knowledge to answer any technical queries. No call centres!

Long term reliability We’ve heard PA contractors tell us they still see our original ‘Redford’ amplifiers in service after 40 years in service!

Value for money.

A trusted partner.

Class leading reliability & 10 year warranty back up ensure you get the best return on your investment.

Our products are in use in thousands of Australia's major building projects.

From stadiums to retail outlets & more.

  

The audio equipment big names use.

3

Redback is made & distributed by Altronics.

Altronics is both the manufacturer and exclusive distributor of Redback products worldwide.

Established in 1976, we are an Australian family owned and operated business importing and manufacturing electronics.

Based in Perth with a national distribution network our range of over 10,000 products provides everything an audio visual or commercial sound installation could require. Below are just a few of the brands we are also distributors for.

Altronics Distribution Centre - Balcatta Western Australia.

30 Day Account Enquiries: +61 8 94282199 or wsale@altronics.com.au 4

Public Address Amplifiers Redback has been manufacturing amplifiers for the Australian and global public address markets since 1974. Combining a rich feature set and proven reliability in the field they are a sought after solution for building public address requirements.

Industry leading warranty.

10 Year Manufacturer Equipment Warranty.

In 2005 we lead the way with a DECADE warranty on our Australian Made products. Many years on it remains the best in the industry, providing installers and end users with peace of mind.

10

Year EQUIPMENT WARRANTY ON AUSTRALIAN MADE.

Amplifiers

redbackaudio.com.au

15 Watt Stereo 8Ω Amplifier A compact audio solution for classrooms, boardrooms, boutiques, reception areas or anywhere a small functional stereo system is required. 210W x 140D x 44Hmm • 15W RMS per channel • 3.5mm music input • 1 auxiliary input • 4 - 16Ω output • 240V AC operation

Model: A 4116

15 Watt PA 4-16Ω Amplifier Super compact with surprising performance specifications, intended for smaller PA system applications.

210W x 130D x 44Hmm • 15W RMS output • Headphone socket • 1 balanced XLR and unbalanced jack mic input • Selectable 12V DC phantom power on mic input • 1 aux input, plus 3.5mm music input (front) • 4-16Ω output • Selectable input sensitivity • 12V DC (includes power supply)

Model: A 4017

​Accessories for A 4116 & A 4017 ​H 4990

Rack mounting kit

H 4991

Under desk bracket

H 4993​ Half rack in-fill panel

BEST SELLER

30 Watt 100V PA Amplifier 2 Input Designed to meet the requirements of small to medium sized professional public address installations, delivering an output power of 30W RMS. With one balanced microphone and two stereo line inputs, recessed treble and bass controls, it’s perfect for installations requiring minimal inputs. Input 1 is mic or line which automatically mutes input 2. Variable sensitivity VOX circuit is also provided on input 1 which mutes input 2.

300W x 220D x 74H mm • Balanced microphone input • Built in VOX muting circuit • Stereo line inputs • Bass and treble tone controls • 100V output • 240V AC operation • Built in short circuit protection

Model: A 4022

6

Amplifiers

Australia’s leading commercial audio supplier for over 45 years.

BEST SELLER

30 Watt 100V PA Amplifier 3 Input A staple of the Redback range since we first started, the 30W amp meets the requirements of small to medium public address installations. Features push to talk (PTT) auxiliary muting, three combined balanced microphone / stereo line inputs, tape out, and separate bass and treble controls.

• • • • • • •

Push to talk (PTT) muting on microphone 1.

Balanced microphone inputs.

VOX muting circuit.

Stereo line inputs & tape output.

Bass and treble tone controls.

Output terminals for 100V line and 8 - 16Ω loads Over-voltage, over current, thermal run-away and short circuit load protection.

Model: A 4024 Desk Mount A 4026 19” Rack Mount

Phase5 40/60/100 Watt 100V PA Mixer Amplifiers Designed to meet the requirements of medium sized professional public address installations.

Features include, VOX muting, three balanced XLR microphone inputs, three line RCA inputs, bass and treble controls, enabling a diversity of installation applications, including schools, public halls, workshops and sporting complexes.

May be fitted with alert/evac tone board and digital remote volume control options.

423W x 225D x 88Hmm. • 3 balanced microphone inputs • Phantom power on mic inputs • 3 line inputs • 19” rack mount kit included • VOX muting • Tape output RCA sockets • Bass and treble tone controls • 100V line output • 240V AC or 24V DC operation • Built in short circuit protection • 10 year warranty • Optional evac module available • Optional remote volume module

Model: A 4037 A 4043 A 4047

40W Amplifier 60W Amplifier 100W Amplifier

​Accessories to suit:

A 4573 Alert/evac tone generator module.

A 4373 Digital remote volume module.

A 2280B Remote volume wallplate.

7

Amplifiers

redbackaudio.com.au

3 Input

6 Input

Phase5 125/250 Watt 100V PA Mixer Amplifiers Now available in 3 input or 6 input versions to suit multi-source PA applications.

Designed for applications requiring up to six microphone inputs, without compromising output power and overall performance. Each model features inputs which can be configured for either microphone or line level operation. Bass/treble controls, phantom powering and adjustable input sensitivity enable unparallelled flexibility for a wide scope of applications such as factories, workshops, mine sites, sports clubs and office buildings. 423W x 330D x 88Hmm.

• Multi-stage thermally cued fan cooling • Available in two configurations, 3 mic/4 aux or 6 mic/7 aux inputs.

• Phantom powering available on all inputs • Adjustable VOX muting on inputs 1 & 2.

• Bass and treble tone controls • Terminals for 100V line output • 240V AC or 24V DC operation • Thermal & fuse overload protection • Built in short circuit protection

3 Input Models: A 4377A 125W A 4387A 250W

6 Input Models: A 4379 125W A 4389 250W

​Accessories to suit:

A 4573 Alert/evac tone generator module.

8

A 4373 Digital remote volume module.

A 2280B Remote volume wallplate.

A 4376 19” Rack Mount Ears

Amplifiers

Australia’s leading commercial audio supplier for over 45 years.

Phase5 Mixer Amplifiers The flagship of the Redback amplifier range with over 40 years of experience built into it, the Phase5 mixer is designed to provide the ultimate in flexibility and performance for high power public address installations.

Since 1974 we have been developing and improving each generation of our amplifiers to ensure solid reliability and long term performance. Australian designed & assembled.

Three levels of input priority available.

A 2711

100V / 70V or 4-16Ω output

LCD status display with customisable source names.

Optional A2711 USB/SD module for music playback

Alert/evac tone generator in-built

Set all your options without lifting the lid.

Configure each input for mic or line with phantom power & VOX muting options

Unparalleled flexibility and performance.

• VU meter on LCD screen • Output peak limited Designed in conjunction with Australia’s leading PA professionals to cater for • Multi-stage thermally cued fan cooling the needs of multi-source installations. The Phase5 mixer offers the ability to • Tape record out terminals monitor amplifier status via the colour LCD screen, plus custom labelling of • Remote volume facility inputs. It can also be fitted with a USB/SD module for music playback. Voice/ • VOX activated 24V DC output VOX muting, including three levels of input priority, bass and treble controls • Phantom powering available on all inputs and phantom powering capability enable unparallelled flexibility for a wide • Mic/line to operate VOX muting on inputs 1 to 3 scope of applications such as schools, shopping centres, workshops, mine • Push to talk (PTT) terminals on rear panel sites and office buildings.

• Bass and treble tone controls • Power amp line out connector Model: • 240V AC or 24V DC power operation A 4275C 125W RMS Amplifier • Thermal & fuse overload protection A 4285C 250W RMS Amplifier • Built in short circuit protection A 2711 USB/SD Music Module • Pre or post line out master volume

9

Amplifiers

redbackaudio.com.au

Phase5 4 Zone 125/250 Watt Mixer Amplifiers A compact 2RU amplifier with four 100V line output zones. These can be selected via the front panel switches. Each zone can also be remote paged via the addition of the A 4488 paging console (max 2) which connects with Cat6 UTP cabling. This allows for paging to selected zones or all call, muting BGM to all zones. BGM can also be selected on or off to all zones remotely from the A 4488 paging console. 483 x 270 x 88mm

​Accessories to suit:

A 4376 19” Rack Mount Ears

• Multi-stage thermally cued fan cooling • 2U 19” rack mount (with optional A 4376) • Tape record out terminals • In-built alert, evac/chime tone generator • 3 mic input and 4 auxiliary inputs • Phantom powering available on all inputs • Adjustable VOX muting on inputs 1 & 2.

• Bass and treble tone controls • Terminals for 100V line output • 240V AC or 24V DC power operation • Thermal & fuse overload protection • Built in short circuit protection

Model: A 4270 A 4280

125W Amplifier 250W Amplifier

A 4488 Paging Console

About 70V & 100V Line Speaker Systems + + +

-

10

-

Measuring 70/100V Line Speaker Impedance: To measure amplifier system load, you must use an impedance meter in order to measure the AC resistance of the connected speaker network. Impedance cannot be measured with a standard multimeter, as this measures the DC resistance. Use the Redback Q 2004 or similar impedance meter.

-

Wiring speakers in parallel for 70/100V line: Where several speakers are to be used at one time, on one circuit, it becomes necessary to use speakers fitted with line-matching transformers. This is to overcome the effects of connecting speakers in parallel and cable losses. The amplifier generally has an output voltage of 100V (70V is typically used in North America). In this configuration the total wattage load on the amplifier is derived from adding all the line transformer tap ratings together. For example, 50 x 5 Watt speakers will have a total speaker load of 250 Watts. A typical 70V/100V line PA speaker string is shown on the right.

Speakers with 100V Line Transformers

100V Line

From Amplifier

Amplifiers

Australia’s leading commercial audio supplier for over 45 years.

Phase5 500 Watt Mixer Amplifier

• 70V, 100V and 4-16Ω outputs • 240V AC or 24V DC operation For installations requiring a high power amplifier. Ideally suited for use • Adjustable input level sensitivities in shopping centres, pedestrian precincts, public transport facilities and • Bass and treble controls convention centres. This model features two inputs (1 x balanced XLR/ • Phantom power on microphone input (XLR input 1) stereo RCA, 1 x stereo RCA) and a local 3.5mm stereo input on the front • Multi stage thermally cued fan cooling panel. Fitted with adjustable VOX muting circuit for input 1 to mute input • Output peak limited 2. 483 x 380 x 88mm.

• Thermal overload protected

Model: A 4395A

Compact 100V Class ‘H’ PA Mixer Amplifiers With Bluetooth Part of our suite of quality imported PA equipment the Redback 6 input Class-H design amplifiers offer multi source mixing including 4 mic and 2 AUX inputs plus USB/SD card/FM tuner audio playback and Bluetooth streaming functionality. They are an all in one amplifier and audio source housed in just a single rack unit of space! Ideal for use in retail, offices, venues and other commercial buildings. Balanced inputs via screw terminals, aux input and line out via stereo RCAs. 484 x 209 x 44mm.

• SD/USB/FM tuner/Bluetooth music source • 85% efficient class-H power performance • Compact 1RU case • Bass & treble control • Front panel mic input • Mic/Line/Phantom Power options on Mic 1-4 • 24V DC battery backup power input • Emergency priority input (Mic 1) • Adjustable VOX muting • 100V/4-16Ω output.

Model: A 4260A 120W Amplifier A 4262A 240W Amplifier

11

Amplifiers

redbackaudio.com.au

PA Zone Amplifiers Our range of zone amplifiers provide flexible and scalable power amplification for 100V line PA systems in installations requiring individual audio zones. Available in single channel up to four channels.

For more information on any product visit www.redbackaudio.com.au

1RU Compact 100V Public Address Mixer Amplifiers These compact 1RU rack mount amplifiers are suitable for both stand alone PA system use, or as zone amplifiers in larger systems requiring local inputs. All models operate on 240V AC or 24V DC for battery backup operation. Dual channel inputs with up to 6 connected sources, switchable from the front panel.

483W x 210D x 44Hmm.

Model: A 4235A 1 x 30W RMS Amplifier A 4245A 1 x 60W RMS Amplifier A 4255A 1 x 100W RMS Amplifier

1RU Compact 100V Public Address Zone Power Amplifiers Utilising only 1RU of rack space, this range of Redback power amplifiers is available in three power ratings of 30W, 60W and 100W RMS. They lend themselves perfectly for installations requiring individual zone amplifiers. Simply choose a power rating according to the wattage required for each zone. All models operate on 240V AC or 24V DC for battery backup operation. 483W x 210D x 44Hmm.

12

Model: A 4230A 1 x 30W RMS Amplifier A 4240A 1 x 60W RMS Amplifier A 4250A 1 x 100W RMS Amplifier

• Compact 1RU 19” rack mount design • Balanced mic or line input • VOX muting • Phantom power • Four auxiliary inputs • Overload limiting • Over voltage limiting • On demand fan cooling • Over temperature shut down protection • Dual input connectors • Variable input sensitivities • 240V AC / 24V DC operation

• Compact 1RU 19” rack mount design • Overload limiting • Over voltage limiting • On demand fan cooling • Over temperature shut down protection • Dual input connectors • Variable input sensitivities • 240V AC / 24V DC operation

Amplifiers

Australia’s leading commercial audio supplier for over 45 years.

1RU Compact Class-D/H Multi Channel Power Amplifiers Part of our suite of quality imported PA equipment these Redback power amplifiers provide independent power amplifiers built into a single 1RU 19” rack mount chassis. They are ideal for use in environments where individual program sources are required in different building zones. Ideal for use in hotels, function centres, shopping malls and commercial offices. Balanced input is provided for each amplifier via screw terminals. Protected against short circuit, high temperature and overload conditions. Importantly these protections are dedicated for each channel, so that if a fault occurs on one amplifier, the other channels are unaffected.

Phase5 2 x 125 Watt 100V Power Amplifier Incorporates two independent 125 Watt amplifiers for powering speakers in multi-zone environments. Ideal for venues such as RSL clubs, taverns, hotels, conference & function centres enabling individual program sources to play to different rooms simultaneously.

483W x 410D x 88Hmm.

Model: A 4372

• 85% efficient power performance • Low power consumption & heat generation • Compact 1RU case • Individual dedicated protection circuitry • Individual cooling systems • XLR cascade output (per channel) • Short circuit, overload, temperature protection • 2 year warranty

Model: A 4310 A 4312 A 4314 A 4316A

4 x 120W RMS Class-D 2 x 240W RMS Class-D 4 x 240W RMS Class-D 2 x 500W RMS Class-H

• Multi-stage thermally cued fan cooling • Low noise and distortion • Input signal presence indicator • Output peak limited • 2U 19” rack mount • 3 pin XLR input, 3 pin XLR loop out • Level control rear mounted • 100V output • Thermal & overload protection • Fault monitoring indicators • 240V AC or 24V DC operation

13

Amplifiers

redbackaudio.com.au

125/250 Watt 100V Power Amplifiers This range of power amplifiers are ideal for installations requiring high power zone amplifiers. Simply choose a power rating according to the wattage required for each zone. These high power models are ideal for use in shopping centres, pedestrian precincts, public transport facilities and convention centres. All models operate on 240V AC or 24V DC for battery backup operation. Input is via 3 pin balanced XLR (500mV). 483W x 340D x 88Hmm.

Model: A 4370A 125W Amplifier A 4380A 250W Amplifier

Phase5 500W Watt 100V Power Amplifier This power amplifier is ideal for installations requiring a high power zone amplifier.

Ideal for use in shopping centres, pedestrian precincts, public transport facilities and convention centres. Operates on 240V AC or 24V DC for battery backup operation.

Input is via 3 pin balanced XLR (500mV). Level control is rear mounted to prevent tampering or accidental adjustment. 483W x 380D x 88Hmm.

Model: A 4390A

14

• Multi-stage thermally cued fan cooling • Input signal presence indicator • Output peak limited • 2U 19” rack mount (ears included) • 3 pin XLR input • Level control rear mounted • 100V, 70V and 4 - 16Ω outputs • Thermal and overload protection • 240V AC, or 24V DC operation • 24V DC 1A output • 1A 24V Ancillary device power output

• Multi-stage thermally cued fan cooling • Input signal presence indicator • Output peak limited • 2U 19” rack mount (ears included) • 3 pin XLR input, 3 pin XLR loop out • Level control rear mounted • 100V, 70V and 4 - 16Ω outputs • Thermal and overload protection • 240V AC, or 24V DC operation

Amplifiers

Australia’s leading commercial audio supplier for over 45 years.

24-28V DC, 100V Line Power Amplifier Modules Designed for use in emergency evacuation systems and powered by an external 24-28V DC source. Input is line level audio and output is 100V line. Features short circuit, overload, thermal cutout protection and steel chassis construction enabling the modules to be direct mounted in fire alarm or emergency evacuation panels.

• Powered by 24-28V DC • 100V line audio output • Line level audio input • Short circuit, overload and thermal cut out protection • Bolt-in chassis construction

Model: A 1922 60W Amplifier A 1932A 120W Amplifier A 1937 250W Amplifier

Retail Music System Amplifiers This pair of amplifiers have been designed for low impedance retail/hospitality music systems where a pair of high quality ceiling or wall speakers can be paired with a subwoofer. Whether its trendy boutiques or a bustling cafe, the Redback A 4860 and A 4861 can be utilised to provide a high level of background music performance.

2 x 50 Watt Bluetooth Amplifier

200 Watt Subwoofer Amplifier

This compact stereo class-D amplifier features Bluetooth 4.2 streaming with in-built optical input for digital audio sources. The amplifier is also fitted with 3.5mm stereo jack and stereo RCA inputs for connection to external audio sources. Bluetooth takes priority over all other inputs, providing easy wireless streaming when you need it.

Size: 200W x 48H x 220Dmm.

A compact subwoofer amplifier providing up to 200W into 4 ohms. Suitable for any passive subwoofer. Ideal for integration with commercial systems in fashion boutiques, shopping centres, gymnasiums etc. Front panel provides level control, phase adjustment and crossover frequency selection (35Hz - 160Hz). Stereo RCA and speaker level input/outputs provided. Size: 200W x 48H x 220Dmm.

Model: A 4860

Model: A 4861

Looking for speakers & subwoofers for retail music systems? See page 79.

15

Amplifiers

redbackaudio.com.au

PA sound for hearing impaired.

Hearing induction loop amplifiers are installed to greatly enhance the listening experience of people using hearing aids. They are commonly installed in public areas which are generally noisy, making it difficult for hearing impaired users to hear clearly.

For more information on any product visit www.redbackaudio.com.au

Building Hearing Induction Loop Amplifiers Engineered to meet AS60118.4-2007 these hearing loop amplifiers include a compressor/limiter circuit with tailored frequency response ensuring excellent speech intelligibility. Great for places of worship, community halls, museums etc. Inputs are provided for balanced mic/line, aux and an input with VOX muting for venue emergency evacuation systems. Two models in the range allow for systems covering up to approximately 180m2 and 650m2.

• Designed to meet AS60118.4-2007 • Compatible with single loop designs • Coverage up to 650m2 • Short circuit proof • Compressor for added speech intelligibility • Adjustable VOX sensitivity

Model: A 4210 80VA - 180m2 A 4212 280VA - 650m2

Hearing Loop Amplifier For Kiosks This compact hearing loop amplifier is designed for use in information kiosks, ticketing booths, help desks etc. Anywhere a small loop system is required to aid the hearing impaired.

Engineered to meet AS60118.4-2007. A balanced mic input and stereo line auxiliary input is provided. Compact half rack 1RU case. 24V DC operation. Approximate coverage 3m2.

Model: A 4205 3VA

16

​Accessories to suit:

Q 2014 Handheld Audio Tone Generator

Q 2012 Loop Field Strength Meter

Mixing & Paging Solutions The Redback range of signal processing products provide easy to install solutions for paging and mixing. Designed with the installer in mind, they offer useful features not found on competitors products and are backed by industry leading warranty and local product support.

UTP Connection

redbackaudio.com.au

Making the connection.

Making the connection from zones back to racks has often been a problematic exercise for installers to work around.

The commonly found UTP cabling has changed all that allowing installers to easily get balanced and unbalanced line signals from where the mics are to where the racks are!

Redback’s range is designed to provide for (almost) every eventuality you might have on-site when installing or retrofitting audio systems in any venue where public address is required.

For more information on any product visit www.redbackaudio.com.au

4 Output Microphone Line Hub Provides a central hub for up to 4 zone mic/line input preamp wallplates or connection boxes via UTP cabling. Ideal for distributing signals over long distances. Dedicated output and level control for each zone, plus a mixed output.

• Connects to mic/line wallplate (A 4931) or box (A 4932) and other Redback UTP connection products.

• Connect up to four audio zones together • Easy Cat5e/6 UTP data cabling connection • Up to 300m cable runs out to zones • Balanced Euro terminal block connections • Balanced mic or line level operation • 24V DC operation

Model: A 4930

1 Output Microphone Line Hub Connects to a mic/line input preamp wallplate or connection box via UTP cabling. Ideal for distributing signals over long distances.

• Connects to mic/line wallplate (A 4931) or box (A 4932) and other Redback UTP connection products.

• Adjustable level control • Easy Cat5e/6 UTP data cabling connection • Up to 300m cable runs out to zones • Balanced Euro terminal block connections • Balanced mic or line level • 24V DC operation

Model: A 4928

​Accessories for A 4928 & A 4930

A 4931 Zone Mic/Line Preamp Wallplate

A 4932 Zone Mic/Line Preamp Box

+ Get full system diagrams at redbackaudio.com.au 18

UTP Connection

Australia’s leading commercial audio supplier for over 45 years.

UTP Extension These handy UTP interface boxes and wallplates allow unbalanced and balanced line signals to be transmitted over long distances using economical UTP cabling. All of the boxes below can be interfaced with each other. So for instance you can connect an A 4935 multi input plate to an A 4942 receiver for direct connection to an amplifier input. Or connect an A 4940 3 pin XLR transmitter to an A 4946 RCA receiver.

This allows for great system flexibility when designing and installing PA systems. All are Australian designed & manufactured.

For more information on any product visit www.redbackaudio.com.au

Line RCA Extension • Connects via RJ45 UTP cabling • DIP switch selectable sensitivity • Point to point connection • 300m range • Level control • 24V DC input

Scan to see the range.

A 4944 Transmitter

A 4946 Receiver

A 4940 Transmitter

A 4942 Receiver

A 4941 Transmitter Plate

A 4952 Transmitter

A 4954 Receiver

A 4953 Transmitter Plate

3 Pin XLR Balanced Signal Extension • Connects via RJ45 UTP cabling • DIP switch selectable sensitivity • Point to point connection • 300m range • Level control • 24V DC input

5 Pin XLR Balanced + PTT Signal Extension • Connects via RJ45 UTP cabling • DIP switch selectable sensitivity • Carries PTT paging signal • Point to point connection • 300m range • Level control • 24V DC input

Multi Input Mic/Line Extension • Standard dual gang wallplate • Connects via RJ45 UTP cabling • Mixed audio output • Connects to A 4942/46 balanced UTP receiver • Connects to A 4480B 8x8 matrix switcher • Individual & master level controls • Stereo RCA input • 24V DC input via Cat5 UTP cable • 3 pin XLR mic/line level inputs

A 4935 Transmitter

A 4937 Transmitter With Bluetooth

19

Audio Sources

redbackaudio.com.au

Audio Sources Scan to see the range.

DAB+ FM Digital Tuner With Wi-Fi Internet Radio Player Model: A 2696A Provides enhanced listening choice for public address systems requiring a variety of internet based music & listening stations (access up to 26,000 stations from around the world). In addition to the internet radio tuner, this radio integrates a media player (UPnP/DLNA server that streams audio files to your network) via wi-fi or wired ethernet. Bluetooth 5.0 wireless audio streaming receiver inbuilt. DAB+ and standard FM radio also available. Includes remote control and wi-fi antenna.

CD Player/DAB+/FM Tuner & Audio Player Model: A 2734 An all-in-one BGM audio player for public address systems featuring a CD player, DAB+ digital tuner, FM tuner and USB MP3 audio playback. It is equipped with balanced XLR outputs and stereo RCA line level outputs. Convenient and compact 1RU 19" rack mountable case. Provided with 20 FM radio and 20 DAB+ radio station presets with direct access controls on the front panel or selection via IR remote control. Bluetooth 5.0 wireless audio streaming receiver inbuilt.

DAB+/FM Tuner & CD/MP3/ Bluetooth Player Model: A 2706F A single disc CD player with USB and SDHC card input, Bluetooth streaming, plus a DAB+/FM tuner and recording. Four stereo RCA outputs are provided; dedicated outputs for CD player, tuner and Bluetooth, plus a combined output which gives priority to the CD/Bluetooth source and switches to the tuner when playback has finished. This provides a continuous source of music program. Excellent for use in boutiques, bars, shopping centres, cafes etc.

Dual AM/FM/DAB+ Tuner With RS-232 Control Model: A 2704B This RS232 controlled dual radio tuner is ideal for multi zone audio systems requiring separate programming in each zone. It features one AM/FM tuner and one DAB+ tuner in the same compact 1RU chassis. Controllable via third party RS-232 control system allowing integration into distributed audio systems in function centres, gyms, venues, educational institutions etc.

AM/FM Stereo Analog Tuner With Remote Control Model: A 2702A Utilises Phase Locked Loop (PLL) synthesised circuitry to ensure excellent frequency stability. The memory function enables presetting of up to 30 FM and 10 AM stations. At just 44mm in height it is suitable for 1 unit rack mounting.

Dimensions 482W x 185D x 44H mm.

20

BEST SELLER

8 Channel MP3 Message Player With Alert/Evac Each channel can be custom programmed with tones, messages or music for use in interactive displays, security, customer entry and emergency evacuation announcements.

When combined with a Redback timer it can play announcements at prescribed times. Includes a library of commonly used tones, messages and phrases plus Australian Standard alert & evacuation tones. Alert tone can be automatically switched to evacuation tone after a set period (adjustable between 30 and 240 seconds). Playback for each track can be activated by a closing set of contacts. All tones and messages are stored on a Micro SD card.

A 1741C

Model: A 1741C Half Rack A 1720B PCB Module

A 1720B

4 Channel MP3 Message Player Offers playback of four MP3 tracks by remote trigger (a closing set of contacts). Ideal for custom programming, tones, messages or music for use in interactive displays, security, customer entry and emergency evacuation announcements.

Can be combined with a Redback timer for scheduled playback. Includes tone & phrase library on SD card.

Model: A 1717A

Rear

DIN Rail 4 Channel MP3 Message Player This DIN rail mount version of our popular A 1717A. Offers playback of four MP3 tracks by remote trigger (a closing set of contacts). Ideal for custom programming, tones, messages or music for use in interactive displays, security, customer entry and emergency announcements. Can be combined with a Redback timer for scheduled playback. Includes tone & phrase library on SD card. Suits 35mm top hat DIN rail.

Model: A 1715

Horn Speaker With MP3 Player This horn speaker features an internal amplifier and MP3 player which plays messages when a 24V input signal is applied. This horn has a multitude of uses including prerecorded announcements, evacuation notices and doorbells.

The tone will play as long as 24V DC is applied. Tones can be selected via a rotary switch on the back of the horn.

Size: ≈180Ø x 255D

Model: S 6150

21

Message Players

Australia’s leading commercial audio supplier for over 45 years.

Paging Systems

redbackaudio.com.au

Paging Systems

4 Input Microphone Hub This model has been designed with small supermarkets in mind. We’ve designed the hub to cater for industry standard supermarket 5 pin XLR microphones which connect to a local wallplate (A 5138) over Cat5/6 cable. This greatly simplifies the install cabling process for multiple microphone systems.

Up to four microphones can be connected to one hub with each input configurable to either VOX or PTT muting. Three levels of priority are provided: FIBD, 1 over 2-4, 2 over 3-4, 3 over 4 or mixed options.

Model: A 5135 Balanced line Cat5e/6 UTP cable

​Accessories to suit

A 5138 A 5138 A 5138

A 5138 5 Pin Mic Wallplate

C 0325 Handheld PTT Microphone

A 5135

A 5138

To PA amplifier

Microphone Delay/Mic-Line Recorder Designed to be connected in-line between a microphone and an amplifier to eliminate feedback issues which arise when paging is executed in close proximity to the system speakers. This is achieved by recording the audio input on delay and playing it back once PTT contacts open. Can also be used as a mic/line input recording device. All recordings stored on Micro SD card.

Model: A 1760

Paging Microphone Chime Module By adding this module inline with a paging microphone pre and post announcement chimes can be added to the audio signal. Typically used in airports, train stations and shopping centres, paging chimes can be vital in gaining the attention of patrons. To be compatible the paging microphone must have a 5 pin XLR connector with PTT function. 24V DC power supply included.

Model: A 4950

22

Rear

Front

Paging Systems

Australia’s leading commercial audio supplier for over 45 years.

Redback 16/32 Zone Communicator A unique design combining state-of-the-art microprocessor circuitry that allows for both 100V line level or low level balanced line signals to be switched, depending on the installation type required. Incredibly flexible and expandable, the Redback communicator is the result of many years development with direct feedback from pro sound contractors.

A 4580 Control Box

A 4587 16 Zone Expander

A 4586 16 Zone Paging Console

Up to 32 zones in a single paging system.

Ideal for paging and background music (BGM) control in large scale PA systems up to 16 zones (expandable to 32 zones with A4587), such as factories, shopping centres, airports, hotels, sporting venues and large corporate buildings. Each zone may be paged either individually or together with the use of the All-Call function. The all-call function may be disabled if it is not required. A “macro” function is also provided to enable the user to program a “zone switch” for one touch operation of multiple zones. Up to 8 paging consoles can be connected across 4 circuits (max 2 per circuit). An additional 16 zones can be added to the console using the A 4587 expander. Interfaces with the Redback Alert/Evac controller to allow industry standard tones to be played in all zones when activated.

This system is also compatible with the Redback A4488 and A4486 paging microphones. A4488 allows for all call paging whilst A4486 allows for paging to 4 zones. All paging consoles can be used in a single system if required.

When used in 100V level configuration the system can be used with 1 or 2 amplifiers.

When used in low level balanced line configuration the system can be used with 16 individual zone amplifiers (or 32 when used with paging expander).

• • • • • • • • • • • • • •

Amp 100V level or low level balanced line switching Selectable pre-announcement chime Selectable BGM for each zone Accepts up to 8 paging consoles Expands up to 32 zones with console add on Paging consoles connect via Cat 5 cable Mics can be up to 300m from control box “All call” alert/evacuation trigger Operates from AC plugpack (included) or 24V DC All inputs/outputs via pluggable terminals Suitable for multi zone amplifier systems.

Active zone indicators Maximum 500W power handling over 16 zones 1U 19” rack mount

Model: A 4580 Control Box A 4586 16 Zone Paging Console Mic A 4587 17-32 Zone Paging Expander A 4486 Line Level ‘All Call’ Paging Mic A 4488 4 Zone Paging Console Mic

23

IP Paging System

redbackaudio.com.au

The IP PA Communicator This system has been developed in conjunction with leading Australian PA contractors and an international IP audio manufacturer. It is designed to be simple to set up and install, and most importantly easy for the customer to use.

There is no complex programming or set up involved.

A 4865 System Encoder

A 4868 Paging Console

A 4872 Zone Decoder

Up to 24 zones in a single paging system.

This flexible system is ideal for schools, shopping centres and large facilities where multi-zone paging is required between multiple buildings. It bridges the gap between internet protocol (IP) based and traditional 100V line PA systems. All components are designed to be plugged into the building local area network (LAN) and will connect to existing building PA, alarm and bell signalling equipment.

The paging controller is the heart of the system where all commands are initiated. It provides zone PA selection, multi-zone recall, background music (BGM) selection and do not disturb settings. When paging to a zone BGM is automatically muted (if selected in that zone). We have designed this touch operated interface to be as easy as possible to use for the end user.

The system encoder has inputs for BGM and the Redback A4505B timer or similar for playback of school bells, alert and evacuation notices/tones. Any alarm or bell signal from the encoder is broadcast on an "all call" basis, overriding any BGM or PA selections. Do not disturb option prevents BGM, PA and bell tones, and allows emergency PA/tones only.

A minimum system comprises of a paging console and system encoder. For zoned systems where connection to a traditional PA system is required, the zone decoder can be added. This converts the IP audio back into standard analog stereo RCA for connection to standard amplifiers. *Note product is currently in final development and appearance may vary.

24

Model: A 4865 System Encoder A 4868 Paging Console Controller A 4872 Zone Decoder

IP Paging System

Australia’s leading commercial audio supplier for over 45 years.

Zone Decoder For IP Communicator Encoders are used to interface the IP based paging system into a traditional 100V line PA system. The required audio is transported over building LAN cabling and the encoder, when addressed, strips the audio out and feeds it into the 100V line zone amplifier. When selected, BGM will be muted by PA, bell or emergency tones. A relay will operate on the encoder under these conditions allowing control of external classroom volume control override relays.

Model: A 4872

Rear

Example System Diagram Output Zones ZONE 1

A 4868 Paging Console

L

L

R

R

Audio Out

2 x RCA

2 x RCA BGM (Music) Source

NETWORK SWITCH

A 4872 Decoder

A 4865 System Encoder

100V Line Output

Audio In

100V Line Speaker Circuit

100V Amplifier

ZONE 2

L

L

R

R

Audio Out

Audio In

A 4872 Decoder

100V Amplifier

100V Line Output

100V Line Speaker Circuit

ZONE 24 Fire Alarm Controller IP Speaker RCA Cable Cat5e UTP Data Cable 100V Line Speaker Cable

IP Ceiling Speaker

IP Horn Speaker

For smaller zones dedicated IP ceiling speakers can be used.

This active speaker offers 16W RMS of audio output with direct power over PoE. Easy to connect directly back to the system encoder (A 4865) via RJ45. SPL 1W @ 1m: 90dB. Max SPL 102dB. Only suitable for use with A 4868 IP communicator system,.

For smaller outdoor zones dedicated IP horn speakers can be used. This active speaker offers 30W RMS of audio output with direct power over PoE. Easy to connect directly back to the system encoder (A 4865) via RJ45. SPL 1W @ 1m: 107dB. Only suitable for use with A 4868 IP communicator system,.

Model: C 2095

Model: C 2035

25

Paging Systems

redbackaudio.com.au

4 Zone Paging Hub & Paging Console Mic An elegant desktop four zone paging mic with pre-announcement chime and balanced line level output. It allows the operator to manually select any zone or any combination of zones, plus all call. The A 4489A control box has been designed to switch either low level in­ puts or amplifier outputs and accepts up to two paging consoles on individual Cat5 UTP cables. A clever design feature is the provision of a 3.5mm input for local music source on the paging console. Music can be selected to any or all zones. Music is interrupted with paging and resumes once the announcement is complete.

A 4489A

Phone/Tablet music source

Model: A 4489A Control Box A 4469 Control Box (Compact) A 4488 4 Zone Paging Console Mic

A 4489A 4 Zone Relay Box Mic or Line Level Out

BGM SOURCE ZONE 1 AMPLIFIER A 4488

ZONE 2 AMPLIFIER ZONE 3 AMPLIFIER ZONE 4 AMPLIFIER

A 4488

A 4960

A 4962

Line Level Paging Microphone & Interface Box An elegant desktop single zone paging microphone with preannouncement chime, balanced line level output and 3.5mm BGM input. The base is a robust heavy duty design coupled with a dynamic cardioid gooseneck microphone. Connects to the A4487 interface box which converts the Cat5 UTP cable (up to 300m long) back to a standard mic/line output for direct connection to an amplifier.

Model: A 4486 Paging Console Mic A 4487 Line Out Interface

Microphone Network System Designed for systems that use a large number of Redback C0325 mics such as supermarkets and hardware stores. This design is very unique in that it allows you to install unlimited PTT mics on a single circuit, but only allow one mic at a time to operate. Cabling can be loop in/loop out and allows for "tee" offs to remote points if required. When a microphone is in use, the system "locks out" all other connected microphones. One mic can be set to have priority and will override all other mics, even if another is in use.

A 4962 can be used as either a transmitter or receiver. When used as a transmitter it can be used to indicate when a service lane or checkout is available. By adding an appropriate switch and indicating light this will direct customers to the next available operator. It could also be interfaced to a local PA with message player advising customers eg: "lane 6 is now available".

Model: A 4960 Wallplate Transmitter A 4962 Transceiver

26

Mixers & EQ

Australia’s leading commercial audio supplier for over 45 years.

Mixers & Signal Processing 4 Channel Mixer With USB Output, Effects & EQ

6 Channel Mixing Desk With USB Playback

• Ultra compact design with USB PC interface • Windows & Mac OSX compatible • Powered via USB • High/low/mid 3 band EQ • Fader level control • 48V phantom power button • Mute buttons • 3.5mm headphone output and mic input • Channel -14dB to +40dB gain control • Signal input and clip indicators • -20dB pad switch

• All inputs top mounted for easy access • Dual 6.35mm TRS outputs • Balanced XLR, unbalanced 6.35mm and insert inputs for external effects • LED VU meters • USB/SD card MP3 playback with transport controls • Repeat and delay effects • External effects send & return • Phones/monitor output & level • Selectable phantom power • Gain, monitor, effect, pan, high, mid & low levels controls on all channels • Record RCA output • LCD readout for USB playback

Model: A 2548

Model: A 2651

4 Channel Headphone Amplifier A compact headphone amplifier featuring four individual channels with volume controls. Ideally suited to monitoring in band and stage environments, it can also be used in educational situations such as language labs. Line level or headphone amplifier signals (mono or stereo).

Stereo RCA, 3.5mm and 6.35mm jack inputs.

Model: A 2630

31 Band Graphic Equaliser Invaluable for counteracting poor room or venue acoustics. The audio spectrum is divided across 31 notch bands each adjustable plus or minus 6 or 12dB from centre or flat position.

• 1U 19” rack mount • 31 bands of adjustment • Ultra low distortion • Balanced inputs and outputs • Unbalanced inputs and outputs • Earth lift switch • +/- 6 or 12dB on each band • High & Low pass filter • EQ bypass switch • Suitable for 24V DC backup systems

Model: A 5330

27

Signal Processing

redbackaudio.com.au Balanced

Unbalanced

Line Isolation Transformers

Eliminate hum and line noise. Balanced models fitted with earth lift switch. Compact all metal casing.

Size: 70D x 40H x 60Wmm (including flange).

Model: A 2519 A 2522 A 2524 A 2517

Balanced 600Ω - 600Ω (3 pin XLR M to F) Balanced 10KΩ - 600Ω (3 pin XLR M to F) Balanced 10KΩ - 10KΩ (3 pin XLR M to F) Unbalanced Stereo (Dual RCA to Dual RCA)

Passive DI Box Converts high impedance unbalanced signals from musical instrument pickups to a low level balanced output. This enables the signal to be transported over long distances without picking up noise or hum. Low level 600Ω input/output via 3 pin male XLR. Two high level 50kΩ inputs/outputs via 6.35mm jack sockets. 120W x 76L x 45Dmm.

Model: A 2510A

A 2513 Input

Signal Level Converters

A 2513 Output

Convert signals from balanced to unbalanced and back again.

Compact all metal casing with level control. Size: 70D x 40H x 60Wmm (including flange). Both are 3 pin XLR to dual RCA. Model: A 2513 A 2514

600Ω Balanced to 10KΩ Unbalanced 10KΩ Unbalanced to 600Ω Balanced

2 Channel Mixer With Vox Muting This compact 2 input mixer which accepts line level or balanced mic signals and outputs to line level or balanced mic, suitable for amplifier connection. Input 1 will VOX mute input 2 regardless of signal type. Volume controls are provided for inputs 1 & 2 plus VOX sensitivity. When VOX is active a switched 24V DC is provided for controlling external devices ie: volume control override relays. Requires 24V DC.

Model: A 4911

1 Input / 2 Output Signal Splitter A compact signal splitter with XLR balanced and RCA unbalanced inputs (each with adjustable sensitivity and individual volume level). Each output is via 3 pin XLR (3mV/1V) or dual RCA (100mV/1V . This enables a variety of input/output configurations to suit different applications.

Requires 24V DC. Size: ≈ 133W x 65D x 44Hmm.

Model: A 4904

28

2 Channel Mixer With Vox Muting (XLR) Identical in operation to the A4911 above, with XLR connections instead of euroblock screw terminals.

Model: A 4915

Signal Processing

Australia’s leading commercial audio supplier for over 45 years.

Mic/Line Pre-Amplifier to Line Level Out Converter Accepts either a microphone or auxiliary input and converts it to a balanced high level signal, suitable for distribution up to 500m. Up to 3V of output level available. Volume controls are provided for both inputs plus a master output level. DIP switch selector allows for balanced 1.5mV or line level 200mV, 500mV or 1V inputs. The unit is powered from a 24V DC source.

Size: ≈ 133W x 65D x 44Hmm.

Model: A 4905

Front

Mic/Line/100V Input to Line & 24V Switched Output The A 4906 is a versatile unit which accepts either a line level signal, balanced microphone signal or 100V input signal. The output signal is a line level signal suitable for feeding into an amplifier. Phantom power is available to the microphone input, and a VOX circuit with adjustable sensitivity, is used to trigger output relays. The unit is powered from a 24V DC source.

Size: 133W x 30H x 80Dmm.

Model: A 4906

Rear

Line Level Compressor/Limiter This compact module is designed to go inline with an audio input source to the input of a mixer or amplifier. It maintains a constant level to the mixer/amp regardless of the amplitude of the input signal. Ideal for venues and function centres that may use multiple audio sources. Power supply included.

Model: A 4948

Amplifier

100V In

A 4903A

Amplifier

Balanced Mic or Line Level Out

100V Line To Mic / Line Attenuator This useful adaptor receives a 100V signal from one amplifier and reduces the level down to either balanced mic level or line level to feed into the input of a second amplifier. Especially useful for expanding existing systems where additional amplifiers are being installed away from the signal source. This revised version adds an additional XLR output socket with a high level output.

Model: A 4903A

Balanced Mic/Line Pre-Amp & Mixer

Features two line inputs and one mic input, each with its own level control. The mic input can be balanced or unbalanced operation. All inputs are mixed to a single line level output.

PCB dimensions 100 x 57 mm. 12-30V DC operation.

Model: A 2055A

29

Public Address Mixers

redbackaudio.com.au

PA Mixers Redback PA mixers provide a flexible, expandable way to connect all sources within your public address installation.

With handy features such as alert/evac tone generators and remote wallplate controllers they offer both ease of installation and day to day use. For more information on any product visit www.redbackaudio.com.au

4 Channel Mixer With Selectable Priority This compact four channel mixer features 4 balanced mic inputs and 3 line inputs. Input 1 is a dedicated balanced mic input whilst inputs 2 - 4 can accept either balanced mic or line level. 3 selectable priority modes - no priority, cascade (1 mutes 2-4, 2 mutes 3-4, 3 mutes 4) or FIBD (regardless of which input is being used, it automatically blocks out all other inputs). Selectable PTT and VOX muting available.

Model: A 5131

4 Channel Mixer With Bass & Treble This compact mixer is ideally suited for use in shopping centres, gymnasiums, places of worship, court rooms etc. All inputs are configurable for balanced mic or line level input. All inputs have selectable sensitivity and phantom power.

The front panel includes individual volume controls and screw driver adjust, treble and bass controls for each input channel. There are two levels of priority/ VOX muting. Inputs 1 and 2 will operate the priority/VOX muting regardless of the input configuration.

Model: A 4422

30

• 4 balanced microphone / 3 line inputs • 3 modes of priority Cascade, FIBD, None • VOX or PTT muting • VOX muting or both mic and line inputs • Channel active indicators • Stylish half width 1RU chassis • 24V DC operation • Separate volume for each input • Adjustable VOX sensitivity for each input • Includes Power Supply

• 4 inputs.

• Individual treble and bass for each channel.

• All mic inputs are balanced via 3 pin screw terminal blocks.

• All auxiliary inputs use dual RCA sockets.

• Adjustable VOX sensitivity.

• Record out socket dual RCA. • Selectable input priority.

• Selectable phantom power.

• Selectable mic or auxiliary mute function.

• 24V DC input.

• Includes Power Supply

Public Address Mixers

Australia’s leading commercial audio supplier for over 45 years.

8 Channel PA Mixer

Model: A 4420C

This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. Features include: selectable phantom power for electret/ condenser type microphones on each input, optional VOX muting of line programs, bass and treble controls (microphone channels can be routed through tone controls or bypassed as desired), individual level controls together with master level control. A 600Ω/0dBm XLR balanced line output is provided, enabling connection to a maximum of 16 power amplifiers.

6 Input, 2 Output PA Mixer New to the Redback mixer stable, this model incorporates six inputs which can be routed to 1 of 2 outputs or both as the installation requires. Inputs can be configured for either RCA line level signals or 3 pin XLR balanced mic signals. Outputs are via RCA and 3 pin XLR balanced 1V signals.

Front panel controls including volume, treble and bass are included for each input. Independent master volume controls are provided for each output.

DIP switches are provided to enable inputs to be switched to either output 1, output 2 or both outputs 1 and 2.

Additional DIP switches allow for each input sensitivity to be set to 100mV and phantom power on/off, and choice of RCA or XLR connection for that chosen input.

• Six mic / line input channels.

• Two outputs via XLR/RCA 1V balanced.

• Level, bass and treble control on all inputs.

• Adjustable input sensitivity.

• Phantom power selection on each input.

• Route signals to each output or both outputs.

• Includes power supply.

• 1RU 19" rack mount case.

Model: A 4424

All housed in a low profile 1RU 19" rack mountable case.

31

Public Address Mixers

redbackaudio.com.au

8 Channel PA Mixer With Tone Generator An evolution of our PA mixer series, the A 4427 combines 8 channels of audio with an MP3 based tone generator for alert, evacuation, chime and prerecorded voice over message alerts. Six audio channels can be selectable for either balanced mic or line. These are connected via stereo RCA (line) or pluggable screw terminals (balanced). Two aux channels are dedicated RCA inputs, plus a 3.5mm jack input on the front panel for connection to local audio/music sources.

Tone Generator Operation.

Tones, chimes and pre-recorded messages are played from the micro SD card which plugs into the rear panel of the mixer. Individual level controls are provided for alert/evac, chime and voice over. All of these can be triggered by closing contacts such as switches, from Fire Indicator Boards (FIB) or any other remote contact source.

4 Channel Mixer With Message Player This unique mixer features four input channels which are user selectable for either balanced mic, line or auxiliary use. It incorporates a four channel SD card based message player making it an excellent choice for retail, supermarkets and hardware stores. It seamlessly brings together paging, BGM and messaging capabilities for building PA systems. Each input is provided with a 3 pin XLR or stereo RCA sockets and individual level, treble and bass controls on the front panel. The message player has priority and slots in between input one and two. Messages are triggered by closing contacts and will queue if input 1 is in use or another message is playing. Input four is also fitted with a 3.5mm jack input for connection to a secondary audio device.

32

• Six mic / line input channels • Two dedicated RCA line input channels • PTT input and 24V PTT output on inputs 1-6 • Micro SD card tone/MP3 module • Level, bass and treble control on all inputs • Three levels of priority • Balanced output • Closing contacts for message triggering • 24V DC switched output • 24V DC battery back up terminals • LED VU meter • Includes power supply

Model: A 4427

• Four input channels • SD card message player for audio messages • Level, bass and treble control on all inputs • 3.5mm music input • Adjustable input sensitivity on mic or line • 24V DC battery back up terminals • Closing contacts for message triggering • 24V DC switched output • Message active indicators • Adjustable VOX muting sensitivity

Model: A 4435

Public Address Mixers

Australia’s leading commercial audio supplier for over 45 years.

4+4 Channel Mixer With Zone Wallplate Source Control Designed in conjunction with pro-sound contractors, the A 4432 is a stand alone 8 input mixer with 5 channels which provides a flexible way to bring multiple audio sources together. It combines many of the best features from our popular mixer and signal processing range into one compact unit. Inputs 1 to 4 can be configured for either mic or line use. Mic inputs are 5 pin euro block including PTT contacts. Line level is via RCA. Input 5 consists of 4 line level RCAs which are selectable from the front panel. With the addition of the selection wallplate, input 5 sources can be selected and adjusted remotely.

A local input plate (A4931) can be connected to the selection wallplate (A4433) offering additional flexibility within the zone. Inputs from A4931 will automatically mute input 5 sources.

Tone Generator Operation.

Tones, chimes and pre-recorded messages are played from the micro SD card which plugs into the rear panel of the mixer. Individual level controls are provided for alert/evac, chime and voice over. All of these can be triggered by closing contacts such as switches, from Fire Indicator Boards (FIB) or any other remote contact source.

Model: A 4432 Mixer A 4433 Wallplate

• Four mic / line Input channels (Inputs 1-4).

• Four switched RCA aux inputs (Input 5).

• Remote aux source selection, volume control via A 4433.

• PTT Input and 24V PTT output.

• Alert/Evac/Chime/Voice-over module with SD card playback.

• Individual level, bass and treble controls.

• 3.5mm music input.

• Three levels of priority.

• Adjustable VOX. • Balanced out.

• 24V DC switched output .

• 24V DC input.

4 Channel Stereo Mixer

Model: A 4411

Designed to meet the growing demands of PA systems utilising high power stereo amplifiers, it features 2 balanced microphone (3 pin XLR) and 2 auxiliary inputs (stereo RCA & 3.5mm jack). Balanced 3 pin XLR outputs for left and right are provided along with standard stereo RCA. Perfect for fitness centres, bars, bistros and sporting clubs. Two sets of tone controls are provided; one for the microphone inputs and one for the auxiliary inputs. Variable mute adjustment is provided for the microphones. This enables each microphone to partially or fully mute the auxiliary inputs as desired. Master volume is provided on the rear panel. A dedicated "sub" output is provided to send to an active subwoofer. Ideal for gyms, clubs etc. A remote A4931 input plate can be connected, when used, this will mute auxiliary 1 and 2.

33

Source Switching

redbackaudio.com.au

Source Switching Whether its a sports bar or a local community centre, the Redback range of source selection products has been designed to be easy to install, program and most importantly operate by end users day to day. No matter the installation size the Redback matrix switching range can provide a flexible solution for audio source selection. For more information on any product visit www.redbackaudio.com.au

4x4 Audio Matrix System Feature packed yet simple to set up and use, this mixer pairs with easy to use wallplate controllers. With 4 inputs selectable to up to 4 zones it is ideally suited to gyms, cafes, restaurants, small clubs and function centres.

A flexible touchscreen operated selection system for multi source installations.

Designed with end users in mind, this complete audio source controller for buildings and venues provides source selection and level control from remotely located wallplate controllers located up to 300m from the main unit. Multiple inputs can be selected/mixed to a zone as desired. The controller offers a visual indication of which input is selected to which output on the front panel LCD and illuminated controls.

It accepts both balanced mic (pluggable screw terminals) and line level signals (stereo RCA) for four audio sources and switches them to matching individual zone outputs. Any or all inputs can be switched to any and all output zones.

For added convenience all inputs and output zones can be labelled for display on the LCD. This allows users to quickly see the source playing in each zone.

A total of 8 remotes can be used on the system. Maximum of 2 plates per cable run The A4660 paging console can be used as a master plate.

34

• 4 mic/line inputs to 4 zones • Touchscreen & iOS/Android app control • Adjustable aux level 100mV/1V • Adjustable balanced mic/line level 3mV/0.7V • LCD for easy selection of sources to zones • System cabling via Cat5e UTP. • Zone and input custom labelling • Adjustable volume for each input to output selection • Master & zone source selection wallplates • 24V DC operation

Model: A 4450 A 4461 A 4462 A 4463 A 4464 A 4660

4x4 Matrix Controller Master 7” Wallplate Black Zone 4.3” Wallplate Black Master 7” Wallplate White Zone 4.3” Wallplate White 7" LCD Paging Console

Source Switching

Australia’s leading commercial audio supplier for over 45 years.

4x8 Stereo Audio Switcher System Designed to distribute 4 stereo audio input sources to 8 stereo output zones making it ideal for use in function centres, hotels, meeting rooms and domestic homes etc. Sends audio sources from one room to another with total ease.

Touchscreen selectable stereo source control for commercial & domestic installations.

Fitted with four stereo RCA connections for inputs and eight stereo RCA connections for outputs, this compact system brings together audio sources for distributing to different zones. The signal of each output is fed into a power amplifier suitably rated for the speakers in that zone.

The master control plate offers selection of inputs to outputs, plus volume level adjustments. It’s also fitted with a Bluetooth receiver which can play audio on any or all zones. Custom labelling of inputs and outputs can be performed directly on this master plate.

The local zone control plate is located within each “zone” and provides volume level adjustment and selection of inputs or Bluetooth audio programming (either from the master control plate or a device within the zone).

The main control unit has 6 sets of closing contact triggers. When activated, via external switch or master wallplate they trigger an MP3 file stored on the inbuilt SD card. The MP3 plays to all zones. These contacts can be programmed to play different MP3s on events eg: door bell, pool gate opening, PIR sensor for customer arrival etc.

• 4 in, 8 out stereo • Touchscreen & iOS/Android app control • Four external MP3 triggers • Six wallplate activated triggers (master only) • Remote wallplate control • Global function to send to all zones • System cabling via Cat5e UTP. • Suits all size power amps • Local Bluetooth inputs • Master plate can control & set up all zones • 24V DC operation

Model: A 4460 A 4461 A 4462 A 4463 A 4464 A 4660

Mixer Master 7” Wallplate Black Zone 4.3” Wallplate Black Master 7” Wallplate White Zone 4.3” Wallplate White 7" LCD Paging Console

Paging Console An all in one master control plate and 8 zone paging console allowing complete control of zone audio source selection, level control and general paging.

35

Audio Matrix

redbackaudio.com.au

8x8 Audio Matrix System Brings together paging, balanced line and stereo line level sources into a single multi zone mixer controller. With remote wallplate control, programmable presets and local zone input wallplates it is incredibly flexible for large scale multi source environments.

Designed to meet the demands of today’s complex audio installations.

This cost effective, PA/BGM control system is suitable for clubs, pubs, gyms etc. It is ideally suited as a central controller for all audio inputs and outputs in a multi zone installation. The design is highly flexible and easily set up by the installer. No special training or complex programming is required. Each input and output can be custom labelled and displayed on the front panel screen.

This shows at a glance, which input is selected to which output.

The system is configured with 8 auxiliary source inputs, 1 emergency paging input and 1 alert/evac input. Inputs 1 and 2 are 3 pin XLR/dual RCA. All other inputs are dual RCA only. Each zone can be fitted with a touchscreen controller (A4493/94) for easy source selection and level control. Plus a local zone source input wallplate such as A 4931 or A 4935 - see over the page for details on these options.

Up to six user presets are provided for recalling regularly used configurations.

These can be selected via the front panel or A4476 preset selector wallplate.

Paging Console The A4481 paging console provides paging to any zone (or combination), plus emergency paging to all zones. It can be located up to 200m away from the matrix controller using economical Cat5 or similar UTP cabling. Up to 8 paging consoles may be used in one system. The A4480B also caters for zones where paging inhibiting is required.

• 8 Stereo RCA line inputs (mono mixed) • Adjustable line input sensitivity 0.3/0.7V • Balanced mic or RCA line on inputs 1 and 2.

• Bass, treble and volume for all line inputs.

• 8 Balanced 3 pin XLR line outputs • Individual volume controls for all 8 outputs • Colour TFT screen for easy review of settings.

• Up to 8 paging consoles per system.

• All call priority line input - ideal for RSL clubs for Ode playback or telephone paging.

• Program isolate function for each zone.

• Alert/evacuation/pre chime tone generator (complies to AS1670.4) • Emergency balanced input • Custom source & zone names • Four programmable presets • On-screen help menu system • Tampering lockout feature • 24V DC operation • 19” rack mount (2 unit)

Model: A 4480B 8x8 Matrix Controller A 4481 Paging Console

See over the page for system diagram and accessories for this system.

36

Touchscreen Remote Program Selection Wallplate

Models A 4493​ White A 4494 ​ Black

This wallplate connects back to the main A4480B via Cat5 cable and permits remote selection of the audio source and volume adjustment in that zone. The LCD displays the zone name, the input sources and zone and local input volume levels. Also connects to local zone input wallplates listed below.

Model A 4476​ White

ACCESSORIES FOR REDBACK A4480B

Remote Preset Selection Wallplate This wallplate is used to provide local access to presets programmed into the A 4480B. The presets are displayed on the LCD and can be cycled through by pressing the program preset button. May be connected to either paging console input or any zone wallplate input on the A 4480B.

Models A 4931 Horizontal A 4931V Vertical A 4932 Boxed

Local Zone Input Wallplate/Box Accepts either a microphone or line input and converts the signal to a balanced high level output. This is carried via Cat5e cable, (suitable for distribution up to 300m) back to the A 4493 wallplate. Receives power down the Cat5e cable from A 4493.

Models A 4935 A 4937 Bluetooth

3 Input XLR Mic/Line Wallplates These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to the A 4493/94 remote wall plate, expanding the number of available local input sources for that zone. All audio inputs are mixed with individual level controls. A 4937 also features Bluetooth for local music streaming from a device.

Wireless Microphone Tuner 2 Tuner 1 CD

Audio Matrix

Australia’s leading commercial audio supplier for over 45 years.

520.00 MHz

92.1 RTR FM

A 4481 Communicator

92.1 RTR FM

A 4478

A 4478

L

Emergency (All Zones)

Lock On

Page Store

R

A 4493

FUNCTION ROOM

Recall

All Call

Cancel

System Busy

Music

From Fire Indicator Board

A 4493

SW1

AMENITIES

OFF OFF ON ON OFF ON ON OFF ON ON ON OFF OFF

ON OFF ON ON ON OFF ON ON OFF ON OFF ON OFF

AL

CH2

COM

EV

OFF Pre Announce CANCEL ON Ding Dong Pre Announce ON Ding Dong Repeating Bong ON Ding Dong Repeating Bing ON Ding Dong CANCEL ON Repeating BongPre Announce OFF Repeating Bong Ding Dong ON Repeating BongRepeating Bing ON Repeating Bong CANCEL OFF Repeating Bing Pre Announce OFF Repeating Bing Ding Dong OFF Repeating BingRepeating Bong ON Repeating Bing CANCEL

8

7

SW2

5

4

Phantom Power Settings SW ON OFF (1) Input 1 ON OFF (2) Input 2 ON OFF

2

3

EMERGENCY INPUT

SW3 Input 1 & 2 XLR

2

6

SW1

2

1

1

SW4 (Not Used)

SW3

3

3

2

SW5

1

A 4476

3

1 2 3 41 2 3 41 2 3 4

Triggers

3 4

message ON

message OFF

Not Used Mic recording enabled

Not Used Mic recording disabled

+

1

(4A M205)

2

3

4

1

8 1

Manufactured in Australia By Altronic Distributors Pty. Ltd. www.redbackaudio.com.au

Earth Lift 24VDC In 24VDC In DC Fuse

Lift/Chassis-

+ _

OFF OFF ON OFF ON ON ON OFF OFF OFF ON ON ON

CH1/ CAN

Aux Input Sensitivity R DIP Switch Settings SW1 ON OFF (1) Input 1 0.3V 0.7V (2) Input 2 0.3V 0.7V L (3) Input 3 0.3V 0.7V The Alert/Evacuation module has multiple chime options, a recordable (4) Input 4 0.3V 0.7V voice-over message and adjustable alert to evacuation tone switch-over times.

These options are selectable inside the unit, via the BCD rotary switch and SW2 ON OFF DIP switches located on the alert/evacuation module (refer to below settings).

(1) Input 5 0.3V 0.7V BCD & DIP SWITCH SETTINGS DIP DIP SWITCH CHIME CONTACT (2) Input 6 0.3V 0.7V ON OFF 4 5 6 7 CH2 CH1/CANCEL SW 1 Momentary AlertLatched Alert OFF OFF OFF OFF Pre Announce Ding Dong (3) Input 7 0.3V 0.7V & Evac operation& Evac operation ON OFF OFF OFF Pre Announce Repeating Bong OFF ON OFF OFF Pre Announce Repeating Bing 2 Voice-over Voice-over (4) Input 8 0.3V 0.7V Voice Chime Alert Over & Evac Output levels

A 4481 Paging Console

INPUTS

ALERT - EVACUATION MODULE

Power Fail

2 3

1 - Shield 2 - Hot 3 - Cold

OUTPUTS

Mic

RESTAURANT

1

2 3

7 1

2

6 1

2

2

1

1

2

4

4

5

3

3

3

2

1

3

1

3

2

1

3

2

3

4

1

2

3

4

1

2

2 1

3

2

3

4

2

1

2

1

2

3

3

SW5 1

ON Phantom

1 3

OFF Phantom

2 Mic Level Line Level Switches 3 & 4 Not Used

Keyboard

8

7

6

5

4

ZONE PLATES OR PRESET ZONE PLATES PLATES OR PRESET PLATE

3

2

1

Vox Level

L

A 4480B 8x8 Matrix

R

Trigger

CONFIRM

To Paging Consoles/Preset Plate

1

2

Priority Input

Micro SD Card 16GB Maximum

PROGRAM PRESET

1 - Shield 2 - Hot 3 - Cold

3 4 Vox Volume Level (Maximum 500mA per output)

A 4476 Preset Wallplate

Line Level RCA/3.5mm Cat5e UTP Data Cable 100V Line Speaker Cable Balanced Line Cable

BAR

A 4493

To Zone Amplifiers

37

Audio Matrix

redbackaudio.com.au

12x16 Audio Matrix System Incorporating 4 microphone inputs and up to 12 line inputs, this easy to set up and control matrix is ideal for RSL clubs, pubs, taverns and function centres.

A new larger audio matrix with touchscreen control for multi-zone PA systems.

Operation is very intuitive and requires no complex training. Any input can be selected to any output zone or combination of zones. All four mic inputs can be selected simultaneously to any zone or combination of zones, along with one of the auxiliary inputs.

Overall system control can be managed with a LCD touchscreen master control wallplate. This allows control of inputs and volume settings for all zones. LCD Touchscreen zone control plates allow input selection and volume control for one zone only. Each zone control plate can be connected to a local input plate which provides connection for additional microphones or a music source within that zone. Bluetooth audio streaming is also provided on each zone wallplate. Third party control is also available using RS232.

For multi-purpose venues, zones can be grouped and disbanded allowing multiple zones to be joined together with control for that zone allowable from any wallplate in the group. Disbanding this group returns the system to its original multi-zone set up.

The system includes all call priority inputs for connection to evacuation alert system and a second tier priority for important announcements or RSL "ode" playback.

Paging Console For general paging to zones the A4655 paging console can be connected. This also provides master control for the system. Up to 8 consoles per system.

38

• 12 in to 16 out matrix • 4 mic level & up to 12 line inputs • Touchscreen & iOS/Android app control • Master & master wallplate controllers • RS232 third party control • System cabling via Cat5e UTP. • Emergency all call paging input • In-built alert/evac signal tone generator • Group & disband multiple zones • Custom labelling of inputs and outputs • Multiple zone control plates per zone • Up to 8 paging consoles • 16 balanced outputs via 3 pin euro block • 24V DC operation • Program isolate for each zone • 4 presets.

• Treble & bass controls on all inputs

Model: A 4650 A 4461 A 4462 A 4463 A 4464 A 4660

12x16 Matrix Controller Master 7” Wallplate Black Zone 4.3” Wallplate Black Master 7” Wallplate White Zone 4.3” Wallplate White 7" LCD Paging Console

Audio Matrix

Australia’s leading commercial audio supplier for over 45 years.

Model A 4564

Fire / Evacuation Paging Console

ACCESSORIES FOR REDBACK A4650

Provides emergency and general all call paging and remote selection of “Alert”, “Evac”, “Chime” and “Cancel” modes. This will trigger the in-built tone generator on the A 4650. General PTT paging will override all other functions of the A 4650, including the Alert and Evacuation modes.

Local Zone Input Wallplate/Box Accepts either a microphone or line input and converts the signal to a balanced high level output. This is carried via Cat5e cable, (suitable for distribution up to 300m) back to the zone/master LCD wallplate . Receives power down the Cat5e cable.

3 Input XLR Mic/Line Wallplates These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to the zone/master LCD wallplate, expanding the number of available local input sources for that zone. All audio inputs are mixed with individual level controls. A 4937 also features Bluetooth for local music streaming from a device.

Models A 4931 Horizontal A 4931V Vertical A 4932 Boxed

Models A 4935 A 4937 Bluetooth

Remote Wallplates To Suit A4650:

Alert/Evac RJ45 Plate A 4578 Horizontal

Alert/Evac/Chime RJ45 Plate A 4581 Horizontal A 4581V Vertical

Fire Alarm Test RJ45 Plate A 4597 Horizontal

Lockdown/Fire/Chime RJ45 Plate A 4599 Horizontal A 4599V Vertical

39

Automation

redbackaudio.com.au

System Automation Now in its fourth generation the Redback Touch wallplate control system has proven popular with AV integrators seeking an easy to program and widely compatible control system for installations.

For more information visit www.redbackaudio.com.au

A 6505A A 6531

A 6541

Redback® Touch Control Wallplates This universal touchscreen wallplate is the perfect control system for commercial and domestic automation. Its stylish low profile design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. The LCD panel can be configured from 1 to 12 buttons, which can be individually labelled. Configuration is performed using the supplied software, which is then transferred to the plate via SD card. A library of button icons is included. Icons can be customised by the user if required. Each button can be programmed for either serial with hex code commands, IR, or relay control. For IR applications the plate can learn and capture IR strings from any remote control. User generated macros can be created consisting of multiple commands in a single button press. This is ideal for performing multiple tasks at once ie: turn on projector, turn on amplifier, turn off lights, drop down projector screen etc.

• User programmable buttons & icons • Multiple screen pages (12 max) • Tandem operation • Event splash screens • Icon library for commonly used buttons • Infra-red control output • RS-232 or RS-485 serial outputs • PIR motion trigger • Haptic & audible button feedback options • U/UTP Cat5 cable connection • Multi-command macros • IR learning facility • SD card configuration upload • Easy to program

Model: A 6530 A 6531 A 6540 A 6541 A 6505A

40

7” Wallplate Black 7” Wallplate White 4.3” Wallplate Black 4.3” Wallplate White 3 Relay, 2 Serial Hub

24V DC Input

A 6505 2 Serial, 3 Relay Control Box Touchscreen Wallplate RS485 RS232

Relay OUT 1 2 3

IR

IR Controlled Devices • Amplifiers • Receivers • Set top boxes • AV Switchers • Tuners • Televisions

24V DC Input

RS485 Controlled Products • Audio visual matrix controllers • Proprietary lighting controls • Access control & monitoring • CCTV & alarm systems

A 6510 12 Relay Control Box

RS485 RS232

Relay OUT 1

2

3

4

5

6 7

8

9 10

11 12

Relay Controlled Devices • Heating and air conditioning • Access control • Automation • Low current lighting etc.

From Other Devices Control relay outputs from other RS232/RS485 devices.

Automation

Australia’s leading commercial audio supplier for over 45 years.

Redback® Touch System Components

Rear Rear

12 Relay Control Box Consists of 12 relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used directly connected to a Redback Touch wallplate, as an expansion for the A6505A hub or as a standalone serial RS232/485 controlled relay hub. Size: 66W x 131W x 29H inc flanges.

Model: A 6510

RS485 Serial 100V Line Attenuator This compact module includes a seven step 100V line speaker attenuator/volume control which can be remotely adjusted via RS 485 serial control. A 24V DC override relay is included for emergency paging applications, ensuring the volume is switched to maximum regardless of the volume setting.

Suitable for all 100V line amplifiers. Connects between amplifier output and speakers to be controlled. This will interface with the Redback touch control wallplate or any other 3rd party control system. Includes capacitor for line monitoring applications. Requires 24V DC power supply.

Model: A 6507

Rear

2 Relay (High Current) Control Box Consists of 2 high current (16A) relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used directly connected to a Redback Touch wallplate, as an expansion for the A6505A hub or as a standalone serial RS232/485 controlled relay hub. Size: 50W x 131W x 46H inc flanges.

Model: A 6515

Rear

RS485 Serial Line Level Attenuators These compact modules are designed to remotely alter the volume of any low level signal source feeding any amplifier or mixer remotely, via RS 232 or RS 485 serial control. They will interface with the Redback touch control wallplate or any other 3rd party control system. Requires 24V DC power supply.

A 6512: Includes one input with remote volume adjustment via serial control or via remote wallplate A 2280B. A 6514: Includes two RCA inputs (selectable by serial control) and remote volume adjustment via serial control.

Model: A 6512 1 input + remote volume A 6514 2 input

41

Level Controls

redbackaudio.com.au

Dual Cover 100V Line Attenuators

Clipsal Pro 100V Line Attenuators

Designed to control 100V line speaker systems these attenuators feature 11 position switches for fine adjustment of sound level. They include override relay for emergency paging applications & a 22µF bipolar capacitor for line monitoring purposes. Screw terminal connections. Two snap-on covers are provided, allowing you to choose a style that suits your installation.

Volume controls designed for 100V line speaker systems. Fitted to Clipsal Pro Series wall plates which have been specifically designed for commercial building installations. They feature 11 position switches for fine adjustment of sound level.

Override relay for emergency paging applications & a 22µF bipolar capacitor for line monitoring purposes. Screw terminal connections.

10W Models: A 2260A White Vertical A 2261A Black Vertical A 2262A White Horizontal 40W Models: A 2265A White Vertical A 2266A Black Vertical A 2267A White Horizontal

10W Models: A 2232 White Vertical A 2233 Black Vertical 40W Models: A 2236 White Vertical A 2237 Black Vertical

A 2285A

A 2287A

Dual Cover Line Level Attenuators 100W 100V Line Attenuator Features a 12 position switch for fine adjustment of sound level.

Whilst all circuitry is housed on a PCB with screw terminals for easy installation. Override relay is included for emergency paging applications. Fits a double gang electrical flush box or wall mounting block.

Model: A 2339

42

In-line volume controls for line level sources such as CD player, Tuner, MP3 player etc. Perfect for board rooms & lecture theatres. Standard line level volume control with screw terminals for input and output connections. A 2287A adds stereo RCA input sockets, stereo 3.5mm jack socket, and screw terminals for output connections. Two snap-on covers are provided, allowing you to choose a style that suits your installation.

Models: A 2285A A 2287A With RCA & 3.5mm connection

Models: A 2347 40W A 2365 100W

5 Zone Rack Mount 100V Line Attenuators May be configured to either five single inputs to five outputs or one input to five outputs. Each zone has a 40W and 100W load capacity respectively, with a total panel capacity of 200W and 500W. All models have ten positions plus ‘off’. The input and outputs are connected via heavy duty screw terminals on the rear panel. Housed in a 2U rack panel supplied with an engraving strip to label the speaker zones. Suits 100V systems only. All controllers include a 22µF bipolar capacitor for line monitoring purposes and are fitted with override relays for emergency paging requirements.

10 Zone 100V Line PA Speaker Selection Panel

Model: A 2080C

Designed for distributed PA systems such as schools, clubs, office buildings and recreation centres, this panel enables the control of paging and background music over 10 speaker zones allowing individual zones to be switched on and off. An all call switch is connected to a relay allowing all zone activation when 24V DC is applied. Multiple units to be connected together to create an infinite number of zones (max 200W per zone). Screw terminal connections. Suitable for 100V or 70V line systems.

Size 482W x 152D x 44H mm.

Surface Mount 100V Line Attenuators

High Power 8 Ohm - 100V Line Speaker Adapter

Designed to control 100V line speaker systems these attenuators are housed in a flanged industrial enclosure for surface mounting. 11 position switches for fine adjustment of sound level. They include override relay for emergency paging applications & a 22µF bipolar capacitor for line monitoring purposes. Screw terminal connections.

Size: 75W x 55D x 135Hmm

This 8 Ohm to 100V line speaker transformer has been designed to allow 8 ohm speakers to be utilised in a 100V line public address speaker system. Ideal for converting existing systems to 100V line or where 8 ohm speakers have been specified for a PA installation. The unit has four input power ratings 25W, 50W, 75W and 100 Watts.

Size: 109W x 65D x 149Hmm.

Models: A 2270 10W A 2272 40W

Model: MB1140

43

Level Controls

Australia’s leading commercial audio supplier for over 45 years.

Line Monitoring

redbackaudio.com.au

Model: A 4582

10 Zone Monitor Panel A handy aid to test and adjust 100V line PA amplifier output levels. Capable of monitoring 10 individual amplifiers (electrically isolated from each other to prevent cross talk). Audible and visual monitoring is available from the built in speaker and VU meter.

Dual rear panel screw terminals are provided to enable through line connection of each amplifier to its respective speaker circuit.

Size: 482W x 50D x 88H mm.

10 Zone Line Monitoring Unit Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Traditional line monitoring units were limited to 50W per zone and would not handle this load. The A 4567B can handle loads up to 500W per zone. It continuously monitors loudspeaker lines for normal, open or short circuit condition, providing an audible buzzer in the event of a fault condition. The system can be configured to operate with multiple amplifiers. Dimensions: 482 x 152 x 44mm.

Model: A 4567B A 4568 FIB Interface Box

• Monitors 10 zones @ 500W max. • Monitors normal, open & short circuit conditions • Switched output for fault monitoring • Pluggable terminals for connections • 24V DC operation • Optional fire indicator board interface (A 4568)

BEST SELLER

Digital Audio Impedance Meter An absolute necessity for all PA system installers for accurately measuring 70V/100V loudspeaker systems, which may include many speakers with line transformers and several hundred meters of cable. Trying to measure this type of load is virtually impossible with a standard multimeter. Most impedance meters on the market display the impedance in ohms, leaving the installer to calculate the system wattage. This impedance meter for ‘dummies’ calculates and displays speaker loads in watts and impedance. An inbuilt system check mode produces a 1KHz test tone into the connected speaker line, enabling the operator to check all speakers on the line are working.

• Suitable for systems up to 10kW • Also measures 4-16Ω loads • OLED display • 1Ω to 20KΩ test range • Auto ranging • Display accuracy +/-10% • System check mode (20, 60 or unlimited mins) • Rechargeable internal battery • Buzzer and haptic feedback • Charging lead supplied • Test leads & carry case included.

44

Model: Q 2004

Timers

Australia’s leading commercial audio supplier for over 45 years.

Yearly School Timer Program the whole year ahead of time with this flexible yearly school timer. Easy to use software allows the installer or end user to program school term dates, student free days, public holidays, day light savings for the entire year. It can be configured for either weekly or fortnightly time tables and interfaces with the school PA system for automated messaging, bell, prebell and music. The timing events are programmed with Windows based software featuring a user friendly calendar layout. This can also be programmed remotely over a local area network (LAN) using a serial to ethernet adaptor (A4498).

The Micro SD card supplied, stores all the MP3 files and timing event programs.

The prebell and music outputs can be setup for random play of MP3 files for “Call to Class” playback of music.

The events when activated also trigger the 24V outputs available on the rear of the unit. Separate 24V DC outputs are available for each of the Prebell, Bell and Music outputs, as well as a common 24V DC output which is activated for all output conditions.

The timing events can also be programmed to trigger the Bell 24V out (and in turn the common 24V Out), with no audio output for activating an external bell or siren.

• MP3 audio format for bell, prebell and music timing outputs • Random play of MP3 files for prebell and music activations.

• Easy Windows based software timing event setup.

• Daylight savings mode • Local push button operation of bell • Switched 24VDC output for bell, prebell and music activations.

• Bell trigger terminals for remote activation • Pluggable screw terminal connections • Auxiliary level output • Battery backup of current time • 24V DC operation • Suitable for any amp with an aux input Learn how to program the timer with our YouTube training video online.

Model: A 4510A Timer A 4498 Ethernet Adaptor Pack

50 Event Timer A versatile timer which has four switched 24V outputs and four closing contacts which activate simultaneously. It permits a total of 50 event switching times. Each can be set to turn on any single day of the week or on multiple days for up to 24 hours.

Switching events programmed for multiple days count as only a single station and each of the 50 event times may be set to any (but not multiple) output. Manual override is provided.

Model: A 1709

45

DIN Rail Products

redbackaudio.com.au

DIN Rail Series Designed to integrate with Redback timing and automated messaging systems, these compact DIN rail products can be used in other standalone industrial switching applications.

50 Event Timer

Timer With Delay

A versatile timer with standard DIN rail mounting. Fitted with four switched 24V outputs and four closing contacts which activate simultaneously. Each of the 50 events can be set to turn on any single day of the week or on multiple days for up to 24 hours. Switching events programmed for multiple days count as only a single station and each of the 50 event times may be set to any (but not multiple) output.

This compact 12-24VDC 5A timer has a multitude of operating modes for how/ when the timing period starts when contacts close, allowing equipment to operate or switch off for set periods.

Timing range can be adjusted between 0-60s, 0-60m and 0-24hrs. Suited for use in alarm systems, access control, lighting and air-con systems.

Size: 90W x 36D x 57Hmm.

Model: S 0080

Model: S 0082

12/24/48V Relay

Event Counter

Temperature Switch

A DIN rail mountable relay box with 2 sets of voltage free changeover contacts suitable for use with Redback timing controllers. Each set of contact terminals have a NO (normally open), NC (normally closed) and a common connection. The relay contacts are rated at 10A. The DC input voltage can be either 12V, 24V or 48V DC selectable.

Allows you to count and log the number of events triggered by a pair of closing contacts. Event times and dates are recorded to the internal Micro SD card.

A 24V DC output is provided (NC or NO output) to run external systems such as a buzzer or light to activate for every event or after a set amount of events. Adjustable ‘ON’ time delay which can be set between 0s and 10s (100ms intervals). Powered by included 24V DC.

A dual input temperature based switch with a multitude of uses in plant rooms, machinery, cold rooms etc in a DIN rail mountable enclosure. Connects to a local or remote sensor located up to 200m away (connects using standard 2 core shielded cable). Upper and lower temperature limits can be set for each input with adjustable hysteresis to prevent repeated relay cutting in and out. Temperature range -49°C to 155°C.

Model: S 4455

Model: S 0088

Model: S 0086

For more information visit www.redbackaudio.com.au

46

Fire & Evacuation Building audio announcement solutions tailored for the Australian market. Since the first evacuation announcement controller designed in 1992, our range has grown into a suite of building audio controllers for alert, evacuation and lockdown requirements designed to integrate seamlessly with existing fire indicator boards (FIB).

Fire & Evacuation

redbackaudio.com.au

Fire / Evacuation / Lockdown Audible notification of emergency events in buildings is a key component in ensuring all occupants are evacuated safely. The Redback suite of fire, evacuation and lockdown controllers are designed to integrate into fire control systems and safeguard occupants in dangerous situations.

For more information on any product visit www.redbackaudio.com.au

Timer & Evacuation Controller A weekly timer and evacuation controller all housed in a convenient 1RU rack mount chassis. A total of 200 “event” switching times are available through the timing functions. Each event can be set to turn on from 1 sec up to 24 hours.

When a timing event is activated, an MP3 audio file will be played with 99 playback folders to choose from, which include bell, prebell, music and folders 5-99 on the included micro SD card. If more than one MP3 is in a folder the MP3 will be random played. Timing events can be programmed on the unit or with included PC software.

• MP3 bell, prebell & music timing outputs.

• Emergency tones conform to AS 1670.4.

• Random play for prebell and music.

• Easy PC based timing event setup.

• Remote triggering of alert, evac and bell.

• Switched 24VDC out for bell, alert/evac.

• Pluggable screw terminal connections.

The evacuation controller is designed around industry standard building • Auxiliary level output. emergency alert/evacuate requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an • Battery backup of current time. emergency e.g. fire, gas leak, bomb scare, earthquake. Provision for connection to • 24V DC operation.

A 4564 paging console for emergency paging and remote activation of alert/evac • Standard 1U 19” rack mount case.

• Suitable for any amp with an aux input. and chime functions. Remote activation is also available via a suite of wallplates which can be wired back to the controller using Cat5 UTP cabling.

The units timer and bell times can be remotely managed over a local area network (LAN) or virtual private network (VPN) using A 4498 ethernet adaptor pack.

Model: A 4500C Controller A 4564 Paging Console A 4498 Ethernet Adaptor Pack

Remote Wallplates To Suit:

Alert/Evac RJ45 Plate A 4578 Horizontal

48

Alert/Evac/Chime RJ45 Plate A 4581 Horizontal A 4581V Vertical

Alert/Evac 8 Wire Plate A 2081 Horizontal

Alert/Evac/Chime 6 Wire Plate A 2078B Horizontal

Timer Isolate RJ45 Plate A 4579 Horizontal

Fire & Evacuation

Australia’s leading commercial audio supplier for over 45 years.

Emergency / Fire Evacuation Controller This easy to operate controller is designed around industry standard building emergency alert/evacuate requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake. It can be interfaced with a fire indicator board (FIB) and automatically activate alerts when a signal is received from the FIB. Alternatively, it can be used in a manual mode where notifications are triggered by remote wallplate, front panel buttons or paging console (A4564).

Emergency conditions can also be cancelled using the same methods.

All tones, including voice over messages are stored on SD card. This allows for custom recording of all tones for each function. The card is supplied loaded with standard alert, evac and several bell chime tones.

Rear mounted volume controls for PA mic, evac, bell, fire, voice over, pre announcement chime and BGM allowing overall audio adjustment. Volume controls are also provided on the front for the auxiliary and front panel mic inputs.

With the addition of the A 4597 remote wallplate, the system can initiate a message to building occupants that the fire system is being tested. The fire alarm switch on this wallplate is in case of fire and will immediately put the system into evac mode.

• Interfaces with fire indicator boards.

• Remote operation of alert and evac tones • 24V DC operation • SD card MP3 tone/message playback • Auto/manual/isolate 003 key switch • Provision for voice-over message • Mic socket for PA use • BGM and line input • Bell chime • Switched 24V output for operating override relay on volume controls.

• Separate relays for alert and evac signals for external strobe light operation • Timer for remote alert activation adjustable from 30s to 7.5 min.

• Line level output • Tones conform to Australian standard.

Model: A 4565A Controller A 4564 Paging Console

Remote Wallplates To Suit:

Alert/Evac RJ45 Plate A 4578 Horizontal

Alert/Evac/Chime RJ45 Plate A 4581 Horizontal A 4581V Vertical

Alert/Evac 8 Wire Plate A 2081 Horizontal

Alert/Evac/Chime 6 Wire Plate A 2078B Horizontal

Fire Alarm Test RJ45 Plate A 4597 Horizontal

49

Fire & Evacuation

redbackaudio.com.au

Lockdown Controller This lockdown controller is primarily aimed at schools which require a lockdown warning facility. The controller has provision for a period bell plus a standby, lockdown and all clear tones. These can be activated by the switches on the front panel, by the remote closing contact triggers on the rear of the unit or by the optional wall plate (A 4598) or paging console (A 4596).

All tones are stored on an SD card in MP3 format allowing complete control over the sounds played for each tone output. Standby and lockdown tones can be set to loop in playback for the period those conditions are active. The main unit, paging console and wallplates offer visual confirmation of lockdown states via button illumination.

The unit is powered from a 24V DC source (power supply included) and separate 24V DC switched outputs are supplied for remote triggering (of sirens/strobes etc) for all tone conditions (pre-bell, period bell, standby, lockdown and all clear).

Connections to the paging consoles and wall plates are made via Cat5e cabling (up to 300m). Up to eight paging consoles or wall plates can be connected at one time.

A standard line level output is provided for connection to the schools PA system.

The lockdown unit can be connected to the A 4565 alert/evac controller if an EWIS alert/evac system is also required.

Model: A 4595A Controller A 4596 Paging Console

Remote Wallplates To Suit:

A 4598 Horizontal Wallplate

50

• 1U 19” rack mount.

• Interfaces with A 4565A for a complete fire/evac & lockdown system.

• Period bell, standby, lock down and all clear controls with remote contacts.

• Connects to lockdown wallplate and paging console via Cat5e UTP cabling.

• SD card tone & audio announcements • RCA audio output.

• Up to 8 paging consoles and 8 remote wallplates per system.

• Switch covers to prevent accidental triggering.

• Adjustable rear mounted level control • Switched 24V outputs for all conditions.

A 4598V Vertical Wallplate

Fire & Evacuation

Australia’s leading commercial audio supplier for over 45 years.

7 Day Timer With Lockdown & Fire Alarm Control A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. For scheduled announcements a total of 200 “event” switching times are available through the timing functions. Each event can be set to turn on from 1 sec up to 24 hours. When a timing event is activated, an MP3 audio file will be played with 99 playback folders to choose from, which include bell, prebell, music and folders 5-99 on the included micro SD card. If more than one MP3 is in a folder the MP3 will be random played. Timing events can be programmed on the unit or with included PC software. The timing events can also be programmed to only trigger the Bell 24V out (and the common 24V out), with no audio output.

The lockdown/fire controller is designed around industry standard building emergency requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g. fire, gas leak, bomb scare, earthquake.

The lockdown, fire, bell tones and cancel function are triggered by the front switches, external wall plates (see below) or by the rear terminal contacts for remote activation. Switched 24V DC Out connections are provided for bell, lockdown, fire or a common out. These contacts are for connection of override relays in remote volume controls, warning strobes, bells etc.

• MP3 for bell, prebell & music timing output.

• Emergency tones conform to AS 1670.4 • Random play of MP3 for prebell and music triggers.

• Easy PC based timing event setup • Local & remote triggering of lockdown, fire and bell.

• MP3 voice over message (available in the lockdown and the fire cycle) • Switched 24VDC outputs • Pluggable screw terminal connections • Auxiliary level output • Battery backup of current time • 24V DC operation • 1RU 19” rack case • Suitable for any amplifier with aux input

Model: A 4505C Controller A 4498 Ethernet Adaptor Pack

The units timer and bell times can be remotely managed over a local area network (LAN) or virtual private network (VPN) using A 4498 ethernet adaptor pack.

Remote Wallplates To Suit:

A 2064 6 Core Horizontal Wallplate

A 2069 8 Core Horizontal Wallplate

A 4599 RJ45 Horizontal Wallplate

A 4599V RJ45 Vertical Wallplate

51

Fire & Evacuation

redbackaudio.com.au

Compact Alert/Evac Tone Generator This half rack unit has both alert and evacuation tones based on Australian standard AS1670.4. The unit is triggered via alert/evac switches on the front of the unit or via remote trigger contacts on the rear. It features 24V switched outputs which are enabled when the alert, evac or chime tones trigger. Powered from a 24V DC source and features a line out socket and voice over option.

It has a choice of 5 chime tones and 3 repeating tones as well as momentary or continuous operation of evac tones.

Model: A 4574

Remote Wallplates To Suit:

Alert/Evac 8 Wire Plate A 2081 Horizontal

Alert/Evac/Chime 6 Wire Plate A 2078B Horizontal

Emergency Warning Tone Generator Containing both the alert & evacuation tones based on Australian standard this compact self contained module will integrate with most PA amplifiers. Includes voice chip for recording custom messages. Tones conform to AS1670.4.

7-35V DC operation.

Model: A 2070B

24V DC Evacuation Strobe Lights Dual red and amber strobe lights for emergency evac systems. Housed on a sturdy, white powder-coated steel chassis for easy bolt on installation.

19mm conduit knockouts provided for cable entry. Terminal block enables 2, 3 or 4 wire operation.

-

+

-

+

Red Amber

1

2

3

4

Model: S 5423

12-24V DC Adjustable Flasher A handy circuit designed to flash indicators on and off at an adjustable interval between 200ms and 2s. Hooks up to virtually any indicator with a 12-24V DC input.

Model: S0084

52

Indicator & Siren Wallplate A dual cover wallplate fitted with an S 6114 90dB pulsating siren and an S 4030 24V DC red indicator lamp. Designed to provide a visual & audible alert when 24V DC power is applied.

Model: S 5416

Fire & Evacuation

Australia’s leading commercial audio supplier for over 45 years.

A 4577 A 4576

Universal Remote Alarm Plates

Firephone Warden Intercom Point (WIP)

Designed for both 12VDC and 24VDC operation, these wallplates will sound a buzzer and illuminate an LED indicator when activated. A cancel button allows buzzer to be switched off, whilst the LED remains on. Can be used as a remote fault monitor for many applications such as nurse call, fire alarm, alarm and access control systems; machinery failure etc.

Requires 1 x figure 8 per zone. Includes dual cover wallplate.

Designed specifically for use in emergency warning systems.

Warden intercom points (WIPs) are used to communicate between floor wardens and the main emergency evacuation panel. When the handset is lifted the firephone automatically rings the emergency evacuation panel. ABS construction.

Dimensions 214L x 70W x 78H

Model: A 2096

Model: A 4576 1 Zone A 4577 6 Zones

100V Speaker Line Isolator

Megaphone/Loud Hailers Output power 25W continuous, 35W maximum. Requires 8 x C size batteries (not included). Suitable for school events, conventions, demonstrations etc. Includes electronic siren for gaining instant attention. Light weight and easy to use.

SPL = 116.2dB at 1W/1M @ 1kHz.

A simple in-line connection box fitted with a line monitoring capacitor. Since many 100V speakers do not have 22µF capacitors fitted, this box allows you to easily add it into the circuit for connection to a line monitoring system. Ideal for retrofitting to existing speakers. Easy screw terminal connection for field wiring. Size: 50 x 36 x 22mm.

Model: A 4566

Alert/Evac version is similar in operation but is also fitted with an alert/evac tone generator. The required function (alert/ evac/megaphone) is selected via a toggle switch and is activated by pressing the trigger.

Model: A 1980B Standard A 1982B Alert/Evac Version

Latching Relay Box This latching relay box offers a compact solution to switching high current circuitry on and off using a low current momentary switch. Simply wire your closing contacts into the trigger input, provide 24V DC in and connect your load to the 24V DC out terminals. For indication, terminals are also provided for an LED. Size: 51W x 70H x 27Dmm.

Model: S 0083

53

Battery Backup

redbackaudio.com.au

24V DC Battery Backup Chargers Ideal for PA systems & other applications requiring battery backup. These models incorporate a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance.

An auxiliary 24V DC 1 amp power supply is provided to run ancillary devices without interfering with the charging cycle. Connected loads to this circuit automatically switch to the battery when mains fails. The circuit includes a host of protection to protect both the charger and batteries. These include reverse polarity connection, low battery disconnect feature and battery isolator/circuit breaker.

Large heavy duty binding posts are included for battery and load terminals.

Individual panel meters are provided for battery voltage and charge current. In normal operation, the panel meters indicate battery charge current and battery voltage. When mains fails, the meters show the load current being drawn (indicated by a minus symbol) and actual battery voltage.

When mains power fails the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. Designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.

• 2RU 19” rack mount • Short circuit protection • Electronic reverse polarity protection • Multi stage charging • Automatic boost and float voltages • Precision control of boost and float voltage settings • Digital battery voltage and current meters • Charging indicator • End of charge (trickle) indicator • Suits sealed, vented lead acid and gel batteries • Low battery cut off • 2 switched 50A outputs Typical charge times (for fully discharged battery): A 4506 24Ah 6Hrs 40Ah 10Hrs

Calculating Battery Size For PA System Use Total amp power in watts* Battery Size =

x 2 = Required amps for 1 hour

Volts Example for 500W Amplifier: 500 Battery Size =

x 2 = 41.6Ah

24

Therefore a 50Ah battery would be suitable Please note: This calculation assumes 100% duty cycle at full power output into full rated load and a 50% audio amplifier power efficiency.

54

Model: A 4506 6A A 4512 12A

A 4512 60Ah 8Hrs 80Ah 10Hrs 100Ah 12Hrs 120Ah 14Hrs

Microphones Our range of quality handheld, wireless and paging microphones for public address systems.

Wireless Microphones

redbackaudio.com.au

UHF Wireless Microphone Systems The mainstay of any venue PA system the UHF wireless microphone provides freedom of movement on stage for speakers and performers alike. Redback have a variety of models to suit different budgets and system requirements.

From fixed dual channel diversity systems to 700 channel systems for large installations with multiple microphones in use. For more information on any of our UHF systems visit redbackaudio.com.au

16 Channel UHF Microphone Systems Ideal for clubs, restaurants, function centres, wedding ceremonies etc. It produces a clear, crisp voice reproduction, whilst allowing freedom of movement. Supplied as a complete ‘ready to go’ system with either handheld or beltpack/lavalier microphone transmitters. 16 channels allow interference free operation with multiple systems in the one location. Output signal is via 3 pin XLR balanced or 6.35mm unbalanced jack, suitable for connection to most amplifiers. Front panel LEDs indicate active antenna and audio signal presence.

Operates in the 520-550MHz range.

Model: C 8867C With Handheld Microphone.

C 8868C With Beltpack Transmitter & Lapel Mic.

2 Channel UHF Fixed Frequency System This 2 channel fixed frequency UHF wireless microphone system, includes two handheld microphones and is the perfect system for wedding ceremonies, DJs, sporting clubs, schools, restaurants and function centres. Both microphones may be used simultaneously, making it perfect for Q&A sessions or with two people on stage.

The fixed frequency design cuts out all the channel set up requirements, simply switch it on, set the output level and start talking! Range of 60m or more in ideal conditions.

Channel 1: 520MHz, channel 2: 524MHz.

Model: C 8884 With Two Handheld Microphones

56

Wireless Microphones

Australia’s leading commercial audio supplier for over 45 years.

2 Channel Fixed UHF Frequency Systems For systems requiring the freedom of two independent wireless microphones at an economical price. The sturdy 19” rack mount cabinet is fitted with two fixed frequency wireless receivers. Each receiver features an independent front panel level control, AF, RF and peak LED indicators. Outputs are provided for each channel via 3 pin XLR, plus a mixed output via 6.35mm jack. Aerials may be remote mounted. A range of 50m or more is obtainable in ideal conditions. The perfect system for wedding ceremonies, DJs, sporting clubs, schools, restaurants and function centres.

Operating frequencies 520 & 524MHz.

Model: C 8881B With Two Handheld Microphones C 8882B With Handheld Mic & Beltpack+Lapel Mic

16 Channel Autoscan UHF Microphone Receiver Incorporates diversity reception ensuring a consistent and clear microphone signal with minimal dropout and noise interference.

16 channels allow interference free operation with multiple systems in the one location. Noise reduction system automatically compensates for high level sound inputs thus avoiding distortion.

Channel and volume settings are adjusted via front panel. A range up to 100m is possible in ideal conditions. Output is via 3 pin XLR balanced or 6.35mm unbalanced. LEDs are provided for displaying system status. 16 Channels in 520 - 550MHz UHF Band

Model: C 8860B Receiver.

16 Channel Handheld Transmitter

16 Channel Beltpack Transmitter

• Exceptional performance. • 35mW high power output • Anti-roll band • Textured body • Requires 2 x AA batteries (either alkaline or rechargeable).

• Compact & lightweight • Fitted with 3 pin mini XLR socket • On / Off / Mute switch • Gain control • Switch impedance between mic & instrument pickup • Requires 2 x AA batteries (either alkaline or rechargeable).

Model: C 8862B

Note: not supplied with a mic, see page 60.

Model: C 8864B

57

Wireless Microphones

redbackaudio.com.au

700 Channel True Diversity UHF Microphone Receiver A professional 700 channel wireless system incorporating true diversity reception. This ensures a consistent and clear microphone signal with minimal dropout and noise interference.

700 channels allow interference free operation with multiple systems in the one location. Noise reduction system automatically compensates for high level sound inputs thus avoiding distortion.

Channel and volume settings are adjusted via front panel controls.

The LCD screen shows selected channel, frequency and RF/ AF signal strength. A range in excess of 100m is possible in ideal conditions. Output is via 3 pin XLR balanced or 6.35mm unbalanced. 700 Channels in 520 - 550MHz UHF Band.

Model: C 8890D Receiver.

700 Channel Handheld Transmitter

700 Channel Beltpack Transmitter

• Unidirectional condenser insert • Exceptional performance. • 35mW high power output • Anti-roll band • Textured body • LCD screen which displays selected channel and battery level • Approximately 13 hours of use from a single set of batteries • Requires 2 x AA batteries (either alkaline or rechargeable).

• Compact & lightweight • Fitted with 3 pin mini XLR socket • On / Off / Mute switch • Gain control • Switch impedance between mic & instrument pickup • LCD screen which displays selected channel and battery level • Approximately 13 hours of use from a single set of batteries • Requires 2 x AA batteries (either alkaline or rechargeable).

Note: not supplied with a mic, see page 60.

Model: C 8892D

Model: C 8893D

Beltpack Pouch

Guitar Interface Lead

System Carry Case

Suits beltpack transmitters. Excellent for aerobics instructors. Manufactured from neoprene “wetsuit” material.

Allows wireless systems to interface directly with a guitar pickup. 1m length.

Suits C 8864B and C 8893D.

With pre-cut foam inserts for half rackmount wireless microphone systems. Ideal for hire companies.

Model: C 8915

Model: C 8909

Model: C 8877

58

Wireless Microphones

Australia’s leading commercial audio supplier for over 45 years.

Log Periodic Dipole UHF Array Antenna (Pair) A wideband 470 to 980MHz frequency antenna pair for improving reception quality and range. It is ideal for installations using wireless mics, tour guide systems or in ear monitoring over long distances. Suitable for stand mounting, the antenna may also be suspended from the ceiling or wall mounted. 10dBi gain with uni-directional design. Powered by 10-15V injection from the receiver unit. BNC connection.

Size: 273 x 273 x 26mm. Suitable for both 3/8” and 5/8” threads.

UHF Wireless Receiver Antenna Divider Designed for use with multiple radio microphone systems, allowing up to four receiver units to share a single set of antennae. This is especially useful for remotely mounting antennas for improved reception. Supplied in a 1RU rack cabinet with 4 sets of connection leads. BNC connection.

Model: C 8846B

Model: C 8847

Antenna Booster Suits Redback UHF systems with removable aerials. Connects via RG58 50Ω coaxial cable and provides 9dB of gain allowing antennas to be mounted 10-50m from the receiver. One required per antenna. BNC connectors.

Frequency range: 520-950MHz.

Ceiling Mount High Gain Antenna Suitable for Redback UHF wireless mic installations requiring extended operating range ie: supermarkets, shopping malls, function centres etc. Provides 9dB gain enabling installation up to 50m from the receiver when using low loss 50Ω coax. Power is received from the UHF receiver.

May be used in conjunction with the C 8844B combiner for increased coverage. Connects via 50Ω BNC. Ceiling hole cutout 32mm. Max ceiling thickness 15mm.

Frequency range: 520-950MHz.

Model: C 8841A

Model: C 8842A Booster C 8843A Mounting Bracket

Antenna Splitter / Combiner Splits a reception signal into two outgoing signals (one input to two output) or combines two reception signals into one outgoing signal (two input to one output). When used as a combiner it can dramatically increase reception area by combining signals from multiple antennae. 50Ω BNC connection. Frequency range: 400MHz-1000MHz.

Model: C 8844B

59

Microphones

redbackaudio.com.au

Microphones All body worn microphones listed below are compatible with Redback UHF wireless beltpack units.

BODY WORN MICROPHONES Mini XLR Electret Presenters Lapel Microphone • Electret type cardioid insert for excellent pickup.

Model C 0398

• Balanced lead with mini XLR connection.

• Requires phantom power.

• 600Ω balanced.

Mini XLR Electret Presenters Ear Worn Microphone • A lightweight buff coloured presenter mic.

Model C 8914

• Back electret condenser for excellent pickup.

• Balanced lead with mini XLR connection.

• Fits left or right ear with adjustable boom.

• 1500Ω balanced.

Mini XLR Presenters Head Worn Microphone • A lightweight buff coloured presenter headset style mic.

Model C 8912A

• Ominidirectional for excellent pickup.

• Balanced lead with mini XLR connection.

• Secures around both ears with adjustable band & boom.

• 1100Ω balanced.

Mini XLR Electret Lecture Head Worn Microphone • A robust presenters microphone for hands free use.

Model C 8913B

• Electret high definition insert for excellent pickup.

• Balanced lead with mini XLR connection.

• Ideal for lecturing, live presentations and spruikers.

• 2.2KΩ balanced.

Mini XLR Electret Aerobics Head Worn Microphone • A sweat resistant robust yet lightweight headset mic.

• Electret unidirectional insert for excellent pickup.

• Balanced lead with mini XLR connection.

• Lightweight & comfortable to wear with flex boom.

• 600Ω balanced.

60

Model C 8911A

Microphones

Australia’s leading commercial audio supplier for over 45 years.

HAND HELD MICROPHONES Professional Unidirectional Dynamic Microphone • A pro dynamic mic for demanding vocal applications

Model C 0388

• Tailored frequency response for vocals with low frequency roll off for reduced handling noise and feedback • Tough zinc diecast body • 5m 3 pin XLR male to 3 pin XLR female cable included.

• 250Ω balanced Studio Quality Entertainer’s Microphone • A fine quality microphone styled on famous Shure brand

Model C 0392

• Excellent reproduction cardioid insert • Sturdy zinc diecast body with silent action reed switch • Reversible locking switch plate.

• 6m 3 pin XLR male to 3 pin XLR female cable included.

• 600Ω balanced.

Drop Proof Balanced Microphone • Drop proof grill - doesn’t lose its shape when dropped.

Model C 0383

• Ideal for schools and clubs • Tough zinc diecast body • 5m 3 pin XLR male to 3 pin XLR female cable included.

• 600Ω balanced.

Handheld Supermarket Style Microphones • Incredibly sturdy all metal built tough for supermarkets and fast food restaurants.

Model C 0324 3 Pin XLR C 0325 5 Pin XLR C 0326 90° 5 Pin XLR

• Screened cabling for use near computer equipment.

• PTT switching pair on 5 pin XLR version.

• Includes mounting clip.

• 600Ω dynamic insert.

• 5 pin XLR model works with A4960 supermarket mic distribution system.

CB Type Fist Microphones • Low impedance 500Ω omnidirectional dynamic mic.

• PTT switching pair on cable.

Model C 0333 CB Bare Ends C 0335 Bal. Bare Ends C 0334 5 Pin XLR

• Includes mounting clip.

• 5 pin XLR version suits Redback alert/evac controller.

61

Microphones

redbackaudio.com.au

DESK & LECTERN MICROPHONES Professional Desk Paging Microphones This desk microphone has a tapered low frequency response for articulate speech reproduction and enhanced clarity.

Fitted with a 2 metre lead. The 5 pin XLR type includes a PTT mute switching pair. The PTT switch features both momentary and lock-on action. Zinc diecast base. 600Ω balanced.

Slimline Electret Desk Paging Microphone

Model C 0377 3 Pin XLR C 0379 5 Pin XLR

Model C 0375

An elegant, stylish, slimline unobtrusive desk-mount paging microphone. Features switchable flat or roll-off response to eliminate low frequency pickup. May also be switched to operate as push to talk or push to lock. Flexible gooseneck base section with rigid mic riser. Excellent for reception desks, medical centres, offices etc. Supplied with balanced 3 pi mini XLR to standard XLR 5m lead. Requires phantom power. 100Ω balanced.

Dynamic Insert Gooseneck Microphone

Model C 0370

A microphone featuring speech tailored frequency response with excellent noise isolation and feedback rejection. Complete with flexible gooseneck and built in 3 pin male XLR connector, it is suitable for lecterns, custom paging consoles, church pulpits and some mixers. Features a 3 pin XLR connector. 600Ω balanced.

Dynamic Insert Gooseneck Microphone With PTT A high performance dynamic microphone with in-built PTT switch in the head for paging systems. Complete with flexible gooseneck and built in 3 pin male XLR connector, it is ideal for paging consoles and general announcing requirements in factories, warehouses, food outlets and venues. 500Ω balanced.

Dynamic Insert Gooseneck Microphone with On/Off Featuring outstanding speech intelligibility, feedback rejection and user sound isolation. Complete with flexible gooseneck and built in 3 pin male XLR connector with on/off switch in base. It is designed for lecterns, custom paging consoles & church pulpits. Includes a 3 pin XLR connector. 500Ω balanced.

62

Model C 0354

Model C 0373

Microphones

Australia’s leading commercial audio supplier for over 45 years.

DESK & LECTERN MICROPHONES Supermarket Gooseneck Dynamic Microphone This incredibly sturdy all metal microphone is built to survive the rigours of supermarkets & fast food restaurants. Redback have made several key enhancements to this model, including added screening for use next to cash registers & computer equipment; an improved base to gooseneck attachment for added service life. Includes PTT pair for muting auxiliary inputs. 600Ω balanced.

Dynamic Screw Mount Gooseneck Microphone

Model C 0327

Model C 0363

An elegant gooseneck microphone delivering superb natural speech reproduction with excellent background noise cancellation and low feedback incidence. Its 5/8th inch threaded screw base is suitable for mounting on equipment or permanent desk mounting . The slimline design is perfect for custom paging consoles. 200mm flying leads. 500Ω balanced.

Electret Insert Gooseneck Microphone

Model C 0369

This elegant gooseneck microphone features smooth, brilliant sound with excellent ambient noise control and feedback rejection. Ideal for installations requiring a high performance unobtrusive microphone. The slimline design is suited to custom paging consoles, lecterns & podiums. Equipped with a 3 pin XLR. Requires phantom power. 250Ω balanced.

Gooseneck Shotgun Microphone A shotgun mic designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adjustment. Requires phantom power. 200Ω balanced.

Model C 0361

63

Microphones

redbackaudio.com.au

SPECIALIST MICROPHONES XLR Phantom Powered Choir Microphone A cardioid microphone designed to be mounted from ceilings in installations such as places of worship where greater noise isolation is required. Low profile design and a flexible cable hanger provide for diverse mounting options and minimum visibility. Phantom powered with a flat, wide frequency response for clear, crisp reproduction. Fitted with 3 pin male XLR. 250Ω balanced.

Electret Boundary Microphone

Model C 0356

Model C 0351A

Fitted with a high sensitivity electret insert. The sturdy diecast case and steel grille offers robust protection, while the rubber base plate minimises vibration pickup. A front panel switch allows quick activation. Rear panel selections include talk/ lock/mute switch, filter switch (0db/-10dB) and polar pattern selection (cardioid, figure 8, variable, omni). Requires 48-52V DC phantom power. Includes 3m mini XLR to 3 pin XLR male lead. 250Ω balanced. 100 x 93 x 26mm.

Microphone Accessories.

For more information on any product visit www.redbackaudio.com.au

Phantom Power Supply A compact single channel phantom power supply with 3 pin XLR female balanced input and 3 pin XLR male balanced 48V output. Includes power supply.

Size: 88W x 47H x 92Dmm.

Foam Windsocks Used to negate breath noise and eliminate wind or breath “pop”. We have listed a typical application here, however we recommend you measure your microphone to choose a suitably sized windsock. OD= Outer diameter.

HD = Hole diameter Model Application C 0337 Lapel C 0338 Headset C 0339 Headset C 0340 Headset C 0341 Headset C 0342 Handheld Small C 0344 Handheld C 0345 Handheld Small C 0346 Paging C 0347 Shotgun

64

OD 22 22 25 37 44 45 60 46 21 26

Length 24 28 60 55 60 63 55 55 30 130

HD 12 8 10 20 20 27 40 10 7 14

Depth 22 20 40 45 55 52 40 45 25 110

Model: C 0357

Beltpack Style Phantom Power Supply Powered by 1 AA battery, this module provides phantom power for mics equipped with 3 pin mini XLR. It provides a 3 pin XLR output. Suitable for use with microphone models C 0398, C 7198A, C 8914, C 8911A, C 8912, C 8913B.

Model: C 0358

Microphone Accessories

Australia’s leading commercial audio supplier for over 45 years.

Microphone Accessories.

For more information on any product visit www.redbackaudio.com.au

P 0967 P 0972

P 0980

P 0973

3 Pin XLR Adaptors P 0972 XLR Male to XLR Male P 0980 XLR Female to XLR Female P 0973 XLR Male to XLR Female with 50KΩ-600Ω and 600Ω-600Ω switch.

P 0968

XLR/6.35mm Socket Adaptors Suit balanced connections.

P 0967 XLR Female to 6.35mm stereo P 0968 XLR Male to 6.35mm stereo

XLR Isolation Cable Connects inline to reduce signal noise and hum. Isolated XLR male to XLR female and XLR male. 40cm.

P 0767

XLR Connection Cables Range of quality audio patch cables.

P 0985A

P 0969

P 0970

3 Pin XLR/6.35mm Adaptors

P 0986A

XLR 5 Pin / XLR 3 Pin Adaptors As used with DMX lighting controllers. Pin for pin connection (4 & 5 no connection).

P 0972 XLR Female to 6.35mm stereo

P 0985A 5 Pin Male to 3 Pin XLR Fem.

P 0980 XLR Female to 6.35mm mono

P 0986A 5 Pin Fem. to 3 Pin XLR Male

XLR Female to 6.35mm TRS Plug P 0750 1.5m

XLR Male to 6.35mm TRS Plug P 0758 1.5m P 0760 10m P 0976

P 0977

3 Pin XLR/RCA Adaptors

XLR "Y" Cable Splitter

P 0976 XLR Male to RCA Socket

3 pin XLR female to dual 3 pin XLR male plugs. Ideal for feeding one signal into two amplifiers.

P 0977 XLR Female to RCA Socket

P 0761

P 0979

P 0731 10m

P 0726 0.5m

3 Pin XLR/Mini XLR Adaptors P 0971 XLR Female to RCA Socket

P 0730 5m

XLR Female to XLR Male

P 0971

P 0979 XLR Male to RCA Socket

XLR Female to 6.35mm TS Plug

P 0728 1m

XLR "Z" Cable Splitter

P 0727 2m P 0729 3m

Quickly adapt and split signals between genders of 3 pin XLR connections. 20cm length.

P 0732 5m

P 0764

P 0737 20m

P 0735 10m P 0736 15m

65

Microphone Accessories

redbackaudio.com.au 6.35mm Connection Cables

Unbalanced 6.35mm TS/6.35mm TS P 6046A 1m P 6048A 3m

XLR Shock Mount Reduces mechanical noise transfer.

Suitable for use in conference rooms, podiums, etc.

Model: C 0482

One-Shot XLR Mic Plates With easy to terminate screw terminals on rear of plate.

3 Pin C 0444

Male White

C 0446A Female White

Balanced 6.35mm TRS/6.35mm TRS

C 0448

P 0715 2m

Dual Female White

CB0446 Female Black

P 0716 5m

CB0448 Dual Female Black 5 Pin

Lectern Microphone Base Unbalanced 90° 6.35mm to 90° 6.35mm P 6057 30cm

RCA Connection Cables

Designed for mounting gooseneck mics.

Heavy die cast base with on/off switch & female XLR. Male XLR output. Rubber base reduces noise.

C 0456A Female White CB0456 Female Black

Model: C 0480

XLR Mic Plates With Clip Fitted with clip for holding fist type CB microphone. With easy to terminate screw terminals on rear of plate.

Unbalanced XLR male/RCA male P 0710 1m

XLR Bench Socket Unbalanced RCA male/6.35mm TS P 0712 1m

Incorporates a 3 pin XLR socket for mounting gooseneck microphones.

Screws directly to a desk or bench. Solder tag connection.

C 0449

3 Pin Female

C 0458

5 Pin Female

Model: C 0431

Unbalanced XLR Female to Dual RCA

Steel XLR Mic Plates

P 0765 1m

Unbalanced XLR Male to 3.5mm TRS P 0766 1m

Linished stainless steel plates for a stylish finish.

Gooseneck Shock Base Flush mount friction fit gooseneck base.

Suitable for C 0410-C 0413 goosenecks.

Mounting hole 50.5mm.

Model: C 0484

66

C 0442

3 Pin Female

C 0457

Dual 3 Pin Female

Mini Microphone Stand Mic stand has fold up legs and stands 86mm high when extended. With standard 5/8” thread.

Model: C 0491 C 0512A

C 0511A

C 0515A

Floor Stands Sturdy telescopic stem with friction grip adjustment. Includes screw adaptor attachment (5/8”) for mic holder etc. Tripod models feature fold up legs.

C 0511A

96-160cm Tripod

C 0515A 96-160cm Tripod+Boom C 0512A 80-151cm Round Base C 0515

Mic Stand Cross Bar Enables 3 microphones to be mounted on a single mic stand. Simply screws on to the 5/8” thread then the mic holders screw to the crossbar.

Flexible Mic Goosenecks Microphone goosenecks incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21.

C 0410

300mm chrome

C 0412

450mm chrome

C 0411

300mm black

C 0413

450mm black

C 0420

Chrome base

C 0421

Black base

Model: C 0400

Carry bag for C0511A/15A

Mini Microphone Stand Robust mic stand with fold-up legs and adjustable centre stem. With standard 5/8” thread and mic holder.

Model: C 0493

Banquet Desk Stand Telescopes both vertically and horizontally.

Swivel adjustment on horizontal arm. 5/8” thread adaptor supplied. Heavy cast base.

Model: C 0505B

Speaker Stands Collapsible for easy transportation.

Anti-sway bars on legs provides stability. Suit 35mmØ top hats for most popular commercial equipment.

Includes safety pin to lock centre pole in fixed position.

Weights are max load.

C 0520A 1.1-1.8m. 60kg Steel/Plastic

Desk Stand Diecast base, telescopic height adjustment from 22cm to 38cm. 5/8” mic holder threaded adaptor included.

Model: C 0500

C 0401

C 0402

C 0404

C 0405

Mic Holders Fitted with 5/8” thread to enable direct fitting to most mic stands.

C 0401

Standard

C 0402

22mm type

C 0404

Wireless Mic Holder

C 0405

Spring Loaded

C 0524

1-2m. 40kg Steel

C 0523

1.4-3m. 50kg Aluminium

C 0522

Flat equipment mount plate.

C 0518

Carry bag

67

Microphone Accessories

Australia’s leading commercial audio supplier for over 45 years.

PA Speakers Redback’s has a long history of designing loudspeakers for commercial public address systems.

We stand behind our product both in terms of quality and innovation with industry leading 5 year speaker warranty and patented design features to make installation easy.

Industry leading warranty.

5 Year PA Speaker Performance Warranty.

Our stringent quality control enables us to offer our industry first 5 year warranty on most of our public address speaker range, including One-Shot and Fast-Fix ranges.

5

Year SPEAKER PERFORMANCE WARRANTY.

Horn Speakers

Australia’s leading commercial audio supplier for over 45 years.

PA Horn Speakers.

Horn speakers are the mainstay of public address, providing a high degree of speech articulation and program clarity over large areas. The Redback range offers AS ISO7240.24 approved fire and evacuation speakers, plus standard PA horns for a variety of applications. Used widely in Australia’s premier buildings and public facilities, all Redback horns are backed by a 5 year speaker performance warranty and have been designed with unique time saving features to minimise installation cost.

One-Shot MK2 10W 100V Line ABS Horn Fire Speaker • AS ISO 7240.24:2018 approved.

Models CF2050G​ Grey CF2050B​ Black CF2050W​ White

• Twist cap top for easy cable termination.

• Requires no external equalisation for AS ISO7240.24 fire systems.

REDBACK FIRE HORNS

• Weather resistant and UV stabilised.

• Stainless steel hardware No EQ Required

• Dog leg mounting bracket • SPL: 1W @ 1m 104dB, 10W @ 1m 112dB (1kHz ±2dB) • Frequency response: 100Hz - 12.5kHz One-Shot 10W 100V Line ABS Horn Fire Speaker

Models CF2053G​ Grey

• AS ISO 7240.24:2018 approved.

• Twist cap top for easy cable termination.

• Meets AS ISO7240.24 for fire & evacuation installations with external EQ applied.

• Weather resistant and UV stabilised.

EQ Required

• Stainless steel hardware • Dog leg mounting bracket • SPL: 1W @ 1m 98dB, 10W @ 1m 110dB (1kHz ±2dB) • Frequency response: 250Hz-10kHz

The Patented Redback Twist Cap. Our twist lock cap makes internal termination easy! Saving installers time and money.

Typically to terminate cabling internally on a horn speaker it involves removing four screws on the rear cover, connecting the cable and then re-installing the same screws.

As you can imagine, doing this up a ladder can get quite fiddly! The One-Shot horn eliminates screw removal by utilising a patented twist lock mechanism. The installer simply twists off the rear cover, connects the cabling and twists the cover back on!

The labour savings by using the One-Shot horn on a large job are significant.

69

Horn Speakers

redbackaudio.com.au 10W 100V Line ABS Horn Speaker • Superb speech reproduction.

• IP66 weather resistant and UV stabilised for long life.

Models C 2050​ Grey C 2051​ White C 2060​ Black

• Fitted with 100V line monitoring capacitor.

• Dog leg mounting bracket for easy installation.

• SPL: 1W @ 1m 104dB, 10W @ 1m 114dB (1kHz ±2dB) • Frequency response: 340Hz-10kHz • Dimensions 180Ø x 255mm.

10W 100V Line ABS Horn Speaker • Superb speech reproduction.

Model C 2053​ Grey

• IP66 weather resistant and UV stabilised for long life.

• Fitted with 100V line monitoring capacitor.

• SPL: 1W @ 1m 104dB, 10W @ 1m 114dB (1kHz ±2dB)

REDBACK STANDARD PA HORNS

• Frequency response: 480Hz - 10kHz • Dimensions 180Ø x 255mm.

10W 100V Line ABS Marine Horn Speaker • Marine grade stainless steel hardware

Model C 2048​ Grey

• Superb speech reproduction.

• IP66 weather resistant and UV stabilised for long life.

• Fitted with 100V line monitoring capacitor.

• SPL: 1W @ 1m 105dB, 10W @ 1m 115dB (1kHz ±2dB) • Frequency response: 300Hz - 13kHz • Dimensions 180Ø x 270mm.

20W 100V Line ABS Horn Speaker • High power taps for greater coverage.

Model C 2056​ Grey

• IP66 weather resistant and UV stabilised for long life.

• Switch selectable power taps.

• Fitted with 100V line monitoring capacitor.

• SPL: 1W @ 1m 108dB, 20W @ 1m 121dB (1kHz ±2dB) • Frequency response: 275Hz - 10kHz • Dimensions 212Ø x 285mm.

30W 100V Line ABS Horn Speaker • High power taps for greater coverage.

• IP66 weather resistant and UV stabilised for long life.

• Switch selectable power taps.

• Fitted with 100V line monitoring capacitor.

• SPL: 1W @ 1m 108dB, 10W @ 1m 123dB (1kHz ±2dB) • Frequency response: 275Hz - 10kHz • Dimensions 212Ø x 285mm.

70

Model C 2057​ Grey

10W 100V Line IP66 Horn Speaker • UV stabilised ABS construction

Horn Speakers

Australia’s leading commercial audio supplier for over 45 years.

Models C 2040​ Grey

• Stainless steel hardware with aluminium bracket • Ideal for use in wet areas, especially on ships, rigs & industrial environments.

• SPL: 106dB 1W @ 1m, 116dB 10W @ 1m (1kHz ±2dB) • Frequency response: 400Hz - 8kHz • 139Ø x 200Dmm 20W 100V Line IP66 Horn Speaker • UV stabilised ABS construction

Model C 2042 Grey

• Stainless steel hardware with aluminium bracket • Ideal for use in wet areas, especially on ships, rigs & industrial environments.

REDBACK STANDARD PA HORNS

• SPL: 108dB 1W @ 1m, 121dB 20W @ 1m (1kHz ±2dB) • Frequency response: 350Hz - 8kHz • 203Ø x 254Dmm 30W 100V Line IP66 Marine Horn Speaker • UV stabilised ABS construction

Model C 2045​ Grey

• Stainless steel hardware with aluminium bracket • Ideal for use in wet areas, especially on ships, rigs & industrial environments.

• SPL: 109dB 1W @ 1m, 124dB 30W @ 1m (1kHz ±2dB) • Frequency response: 330Hz - 8kHz • 238Ø x 287Dmm 30W 100V Line IP67 Low Temperature Horn Speaker • Perfect for cool rooms with operating temp to -30°C

Model C 2047​ White

• UV stabilised ABS plastic construction • Stainless steel mounting hardware • Fitted with line monitoring capacitor • SPL: 106dB 1W @ 1m, 121dB 30W @ 1m (1kHz ±2dB) • Frequency response: 500Hz - 7kHz • 130Ø x 175Dmm 12W 100V Line IP67 Marine Horn Speaker • Perfect for harsh environments (-30°C to 70°C)

Model C 2083​ Grey

• UV stabilised ABS plastic construction • Stainless steel mounting hardware • Fitted with line monitoring capacitor • SPL: 98dB 1W @ 1m, 109dB 30W @ 1m (1kHz ±2dB) • Frequency response: 510Hz - 12kHz • 143Ø x 110Dmm

71

Horn Speakers

redbackaudio.com.au 60W 100V Line IP66 High Power Horn Speaker • High output for installations with high ambient noise.

Models C 2090 60W

• IP66 weather resistant & UV stabilised • Superb speech reproduction & frequency response • Aluminium wall bracket & stainless steel hardware • SPL: 103dB 1W @ 1m, 120dB 60W @ 1m (1kHz ±2dB) • Frequency response: 340Hz - 10kHz • 146Ø x 227Dmm 100W 100V Line IP66 High Power Horn Speaker • High output for installations with high ambient noise.

Models C 2092 100W

• IP66 weather resistant & UV stabilised • Superb speech reproduction & frequency response

REDBACK HIGH POWER PA HORNS

• Aluminium wall bracket & stainless steel hardware • SPL: 106dB 1W @ 1m, 126dB 100W @ 1m (1kHz ±2dB) • Frequency response: 300Hz - 9kHz • 146Ø x 227Dmm 30W 100V Line IP56 Music Horn Speaker • Ideal for BGM programming & paging.

Models C 2070 30W

• IP56 weather resistant & UV stabilised • Superb speech reproduction & frequency response • Aluminium wall bracket & stainless steel hardware • SPL: 100dB 1W @ 1m, 115dB 30W @ 1m (1kHz ±2dB) • Frequency response: 130Hz - 18kHz • 360W x 165H x 275Dmm 30W 100V Line IP65 Music Horn Speaker • Re-entrant low/mid driver & high frequency horn.

Models C 2077 30W

• IP56 weather resistant & UV stabilised • High clarity for exterior music reproduction.

• Aluminium wall bracket & stainless steel hardware • SPL: 98dB 1W @ 1m, 113dB 30W @ 1m (1kHz ±2dB) • Frequency range: 65Hz - 16.5kHz • 442W x 260H x 288Dmm 40W 100V Line IP65 High Efficiency Horn Speaker • High performance horn with 128dB @ 40W. • IP65 weather resistant & UV stabilised • High clarity for exterior music reproduction.

• SPL: 112.5dB 1W @ 1m, 128dB 40W @ 1m (1kHz ±2dB) • Frequency range: 180Hz - 7kHz • 400W x 200H x 450Dmm

72

Models C 2059 40W

60W 100V Line IP66 Compression Reflex Horn

HIGH POWER

• Ideally suited to open air paging applications • High SPL output for wide area coverage

Horn Speakers

Australia’s leading commercial audio supplier for over 45 years.

Models C 2064 Driver C 2062 540mm Flare

• IP66 rated weatherproof • Supplied with stainless steel bracket & hardware • SPL: 113dB 1W @ 1m, 132dB 60W @ 1m (1kHz ±2dB) • Frequency range: 160Hz - 7kHz C 2064 Horn with C 2062 flare fitted.

• Flare size 540Ø x 600Dmm. 10W 8 Ohm IP66 Horn Speaker • High performance 8 Ohm speaker for low impedance music/paging applications.

Models C 2020 10W

• Superb speech reproduction.

• IP66 rated weatherproof & UV stabilised plastic

REDBACK LOW IMPEDANCE HORNS

• SPL: 104dB 1W @ 1m, 114dB 10W @ 1m (1kHz ±2dB) • Frequency range: 340Hz - 10kHz • 180Ø x 230Dmm 25W 8 Ohm IP65 Horn Speaker • High performance 8 Ohm speaker for low impedance music/paging applications.

Models C 2026 25W

• Superb speech reproduction • IP65 rated weatherproof & UV stabilised plastic • Ideal for mounting in sheltered outdoor locations • SPL: 108dB 1W @ 1m, 122dB 25W @ 1m (1kHz ±2dB) • Frequency range: 250Hz - 10kHz • 300W x 180H x 290Dmm 30W 8 Ohm Horn Speaker • High performance 8 Ohm speaker for low impedance siren & alarm applications.

Models C 2022 30W

• Vibration resistant • UV stabilised all plastic PVC construction • Ideal for mounting in sheltered outdoor locations • SPL: 106dB 1W @ 1m, 121dB 60W @ 1m (1kHz ±2dB) • Frequency range: 400Hz - 9kHz • 200W x 120H x 237Dmm

Horn Speaker Security Cages Constructed from galvanised mesh these enclosures have been designed to protect the enclosed horn/speaker from physical damage or theft. Great for schools, colleges, train stations, airports, sports grounds etc. Dimensions exclude mounting flange.

Model: C 2054 Wall Mount 260 x 260 x 360mm C 2058 Ceiling Mount 230 x 230 x 330mm

Suits: C 1520, C 2040, C 2042, C 2047, C 2048, C 2050, C 2051, C 2053, C 2056, C 2057, C 2060, CF2050 series, CF2053 series.

73

Pendant & Ball Speakers

redbackaudio.com.au

Pendant & Ball Speakers Used in large open areas with very high raked, suspended, concrete, or exposed ceilings such as supermarkets, hardware stores, gymnasiums and large venues. They offer excellent sound dispersion For more information on any product visit www.redbackaudio.com.au

35W Ceiling 360° Ball Speaker

35W Ceiling Ball Speaker

15W Ceiling Ball Speaker

The spherical enclosure and parabolic reflector combine to create an omni-directional 6.5” loud speaker, allowing 360° horizontal sound dispersion. Articulate reproduction suitable for both background music and paging.

Includes stainless steel wire suspension kit. Fitted with line monitoring capacitor. 92db SPL 1W @ 1m. 80Hz 16kHz. 380W x 290Hmm, 4kg.

Designed for use where traditional ceiling mounted speakers are impractical to install. Installation requires a single fixing with connection concealed within the ceiling rose provided. Fitted with a high efficiency 165mm (6.5”) twin cone 30W driver and is IP35 rated.

91db SPL 1W @ 1m. 100Hz - 20kHz. 260mmØ, 3kg. 5m cable.

Designed for use where traditional ceiling mounted speakers are impractical to install. Installation requires a single fixing with connection concealed within the ceiling rose provided. Fitted with a high efficiency 165mm (6.5”) twin cone 15W driver.

90db SPL 1W @ 1m. 100Hz - 20kHz. 190mmØ, 1.8kg. 4m cable.

Model: C 1070 35W Speaker C 1075 Flush bracket

Model: C 1055A

30W Ceiling Pendant Speaker

30W Ceiling Slim Pendant Speaker Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Installation requires a single fixing with connection concealed within the ceiling rose provided. This model is fitted with a high efficiency 114mm (4.5”) full range 30W driver, fitted with internal 100V line transformer with an 8 Ohm bypass. 90db SPL 1W @ 1m.

70Hz - 20kHz. 185mmØ x 230H, 2kg. 3m cable.

74

Model: C 1050 15W White C 1051 15W Black

Model: C 1057 White C 1058 Black

A stylish pendant speaker for installations requiring a high power & SPL output.

Installation requires a single fixing with connection concealed within the ceiling rose provided. Fitted with 6.5” coaxial 2 way driver and high efficiency transformer.

90db SPL 1W @ 1m.

50Hz - 20kHz. 252mmØ x 240H, 2kg.

2m cable.

Model: C 1060A

Column Speakers

Australia’s leading commercial audio supplier for over 45 years.

Weather Resistant (IP66) High Power Sound Columns These stylish, compact column speakers utilise multiple 3.5” (89mm) woofers and a high power dome tweeter to produce superb clarity for both music and speech applications. Ideally suited for use in places of worship, lecture theatres, auditoriums, gymnasiums and school assembly areas. Their IP66 weatherproof construction makes them also suitable for installations in exposed areas, such as train platforms & pedestrian precincts.

The sound columns include a high grade multi-tap transformer allowing several power taps plus a low impedance setting.

An ABS mounting bracket is included for rust free performance in all conditions. This allows both horizontal and vertical adjustment, ensuring sound is directed where needed.

These Redback column speakers will provide excellent all-round performance while remaining architecturally unobtrusive.

• Fitted with capacitor for line monitoring • Durable extruded aluminium housing & rust free aluminium grille.

• Attractive slimline construction.

• Fitted with high performance drivers for exceptional speech & music reproduction.

• Suitable for accurate, “long throw” applications.

• Water protected to IP66, suitable for indoor/outdoor use.

• Durable ABS adjustable bracket • 20 or 40 watt versions available.

• Available in White (RAL 9003).

• Multi-core cable for tap selection.

90

9 6(D)

114 (W)

ABS mounting bracket for rust free performance in all conditions.

Model: C 0951A 20W 92dB 1W @ 1m, 120Hz - 20KHz 585L x 114W x 96Dmm C 0957A 40W 93dB 1W @ 1m, 110Hz - 20KHz 960L x 114W x 96Dmm

585

75

Sound Projectors

redbackaudio.com.au

Sound Projectors Used in large open areas with very high raked, suspended, concrete, or exposed ceilings such as supermarkets, hardware stores, gymnasiums and large venues. They offer excellent sound dispersion. For more information on any product visit www.redbackaudio.com.au

20W 100V Line IP65 Sound Projector This sound projector is made from strong UV stabilised ABS plastic with a perforated metal grille. It is designed for use in 100V line distributed systems.

A wide dynamic range facilitates use with both paging and background music applications eg: sports stadiums, train station platforms, shopping centres, aquatic arenas, etc. Includes line monitoring capacitor.

92db SPL 1W @ 1m. 110Hz - 18kHz. 138Ø x 195Dmm.

Model: C 1520 White C 1549 Black

One-Shot 20W 100V Line IP65 Fire Sound Projector

20W 100V Line IP65 Bi-Directional Sound Projector

For use in fire & evacuation systems in Australia (AS ISO 7240.24:2018).

Our first One-Shot sound projector, designed to save installers time and money. This sound projector is primarily used for fire and evacuation systems where a high degree of speech articulation and program clarity is paramount. Typical applications include schools, train and bus stations, airports, car parks and plant rooms.

92db SPL 1W @ 1m. . 147Ø x 215Dmm. Approval pending.

This bi-directional speaker is manufactured from a heavy duty aluminium extrusion. It is fitted with two high efficiency 5” speaker drivers offering exceptional speech intelligibility. Housing & grille are finished in industrial grade white powdercoat, while each speaker cone is treated to withstand moisture. A low profile aluminium mounting bracket is fitted to the housing. Applications include train stations, airports, carparks, schools, office corridors etc. Fitted with capacitor for line monitoring.

92db SPL 1W @ 1m. 120Hz - 18kHz. 140Ø x 200Dmm.

Model: CF1520G Grey CF1520B Black CF1520W White

Model: C 1522

The Patented Redback Twist Cap (CF1520 models only).

Our twist lock cap makes internal termination easy! Saving installers time and money.

Typically to terminate cabling internally on a sound projector speaker, it involves removing three screws on the rear cover, connecting the cable and then re-installing the same screws. As you can imagine, doing this up a ladder can get quite fiddly!

The One-Shot eliminates screw removal by utilising a patented twist lock mechanism. The installer simply twists off the rear cover, connects the cabling and twists the cover back on!

The labour savings by using the One-Shot horn on a large job are significant.

Patent/registered design pending.

76

Wall Speakers

Australia’s leading commercial audio supplier for over 45 years.

Wall Speakers A mainstay of PA installers across Australia the Redback range offers a wall mount speaker to suit most music and paging system needs at a variety of price points. Redback have aimed to provide a quality imported product that includes features that other brands often overlook, such as aluminium grilles and brackets for superior long term performance when installed in harsh environments.

2 Way Stereo Wall Mount Music Speakers These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Each feature a 2-way speaker system for optimum frequency response and clarity. Connection is via the recessed inbuilt gold plated banana sockets.

100V line models provide multiple power taps and 8 ohm settings, easily selected via the inbuilt rotary switch. All are IP54 rated and sold in pairs.

Model C 0902 C 0903 C 0912 C 0913 C 0922 C 0923 C 0917A C 0918A

Colour Drivers White 3.5” + Mylar tweeter Black 3.5” + Mylar tweeter White 5.25” + Mylar tweeter Black 5.25” + Mylar tweeter White 6.5” + Mylar tweeter Black 6.5” + Mylar tweeter White 8” + Silk dome tweeter Black 8” + Silk dome tweeter

Power Taps SPL 1W @ 1m 2.5, 5, 10, 20W 87dB 2.5, 5, 10, 20W 87dB 3, 10, 25, 45W 88dB 3, 10, 25, 45W 88dB 7.5, 15, 25, 35, 50W 88dB 7.5, 15, 25, 35, 50W 88dB 7.5, 15, 25, 35, 50W 88dB 7.5, 15, 25, 35, 50W 88dB

Freq. Response 82Hz - 20kHz 82Hz - 20kHz 61Hz - 20kHz 61Hz - 20kHz 65Hz - 20kHz 65Hz - 20kHz 39Hz - 20kHz 39Hz - 20kHz

Size (WxDxH) 130 x 105 x 170 130 x 105 x 170 180 x 150 x 238 180 x 150 x 238 215 x 202 x 288 215 x 202 x 288 270 x 225 x 355 270 x 225 x 355

Weight 2.2kg 2.2kg 3.5kg 3.5kg 4.5kg 4.5kg 7kg 7kg

Mini Satellite Speaker Pair These 2.75” satellite cube speakers are perfect for home or commercial audio applications where sound and size matter.

They feature a strong ABS enclosure suitable for a long life and durability. The adjustable ball-joint mount gives you flexibility in how to position the speakers when installing them. The paper cone woofer delivers rich full sound.

10W RMS 8 Ohm. 85dB sensitivity. Size: 94 x 83 x 118mm • Reinforced paper cone woofer for smooth and accurate audio reproduction.

• Rugged ABS Enclosure for long lasting performance.

• Adjustable ball-joint mounting bracket.

Model: C 5285

• Screw terminal connection.

77

Wall Speakers

redbackaudio.com.au

30W Weather Resistant (IP54) Sound Monitors

Specification Power rating 8Ω: Power taps 100V: SPL 1W @ 1m: Frequency response:

These sound monitors are constructed from super tough UV stabilised thermoplastic. They feature a two way, bass reflex speaker system with a 100mm bass/midrange driver and a polymide dome tweeter with a custom designed crossover network. They produce a punchy, powerful sound making them the perfect choice for BGM/paging applications in hotels, taverns, shopping centres, halls, schools, and fairgrounds. Included is the Wacki bracket mounting system, allowing a wide variation in mounting angles. Multi-core cable for power tap selection (100V models). Available in either 8Ω or 100V line. 230H x 155W x 115Dmm. Sold individually.

30W 5, 10, 20, 30W 91dB 90Hz-18kHz

8 Ohm: C 0904 White C 0905 Black

100V: C 0907 White C 0908 Black

30W 2-Way 8 Ohm/100V Line Wall Speakers Offers the flexibility for 8 ohm domestic use or 100V line for commercial installations. These speakers deliver high quality sound for music and sound reinforcement in domestic and commercial installations. Ideal for entertaining areas or boutiques, cafes, pubs & clubs in PA installations. Aluminium grille & wall bracket offers rust free performance even in demanding environments.

Suitable for sheltered outdoor installations. 261 x 156 x 169mm. Sold in pairs.

Specification Power rating 8Ω: Power taps 100V: SPL 1W @ 1m: Frequency response:

30W Dual Driver Sound Monitors These stylish wall speakers deliver high quality sound for music and sound reinforcement. Ideal for entertaining areas at home or boutiques, cafes, pubs & clubs in professional installations. Connection is via spring terminals on rear. Aluminium grille & stainless steel hardware offer rust free performance in even the most demanding environments.

Power taps in 100V line models are selectable via rotary switch.

Suitable for outdoor installations under cover eg: not rainproof.

305H x 150W x 185Dmm. Sold individually.

Specification Power rating 8Ω: 40W Power taps 100V: 2, 4, 7.5, 15, 30W SPL 1W @ 1m: 88dB Frequency response: 65Hz-20kHz

78

8 Ohm: C 0936 White C 0937 Black 100V: C 0938 White

30W 5, 10, 20, 30W 88dB 65Hz-22kHz

Model: C 0946

Active 2 Way Wall Speakers System comprises of one active speaker with inbuilt stereo amplifier and one passive speaker which is powered from the active speaker. These high power music speakers feature exceptional sound quality for professional sound reinforcement. Available with 130mm, or 165mm bass drivers they feature a stylish contoured profile and quick mounting bracket which virtually disappears once mounted. An in-built amplifier allows easy integration into existing systems with only line level RCA signal required for operation.

Specification Rated power (max): SPL 1W @ 1m: Frequency response: Size (W x L x D mm):

C 0927 30W 87dB 80Hz-20kHz 248x190x210

C 0929 50W 88dB 70Hz-20kHz 288x215x242

Model: C 0927 130mm C 0929 165mm

Subwoofers For high power music systems in commercial spaces a subwoofer adds depth and dynamism to the sound reproduction. The Redback range is ideal for trendy fashion boutiques, shopping centres, gymnasiums etc. All are well suited for use with the Redback A4861 subwoofer amplifier, see page 15.

240W 4 Ohm/100V Ceiling Subwoofer

100W 8 Ohm/100V Floor Subwoofer

150W 4 Ohm Outdoor Subwoofer

High power commercial grade 10” subwoofer for providing additional low end response to foreground music and hi-fi applications. Enclosed metal dome offers physical protection and extends bass response. Requires 330mmØ ceiling cutout. If mounting into a tiled ceiling, the C 1066 tile bridge & tether chain should be utilised for a secure installation. 240W @ 4Ω, 30Hz 15Khz. Max SPL: 112dB. Size: 360Ø x 330Dmm, 7.5kg.

A high quality commercial grade passive 8” subwoofer for use with either 100V line PA amplifiers or low impedance 4 - 8 Ohm amplifiers. This sub provides additional low end response to foreground music and hi-fi applications. Enclosure is constructed from sturdy MDF particle board with hard wearing stippled black finish and steel protective grille.

100W @ 8Ω, 55Hz - 15Khz. Max SPL: 98dB. Size: 260W x 320D x 340Hmm.

Designed to be placed virtually anywhere outdoors for added low end bass response for commercial and Fits discretely domestic music into outdoor systems. Its unique spaces ABS enclosure can be placed on the floor and secured using the included eye bolt.

150W @ 4Ω, 50Hz - 300Hz. Max SPL: 108dB. Size: 310H x 420Ømm.

Model: C 1065 C 1066 Ceiling tile bridge

Model: C 5210

Model: C 5220

79

Speakers & Subwoofers

Australia’s leading commercial audio supplier for over 45 years.

PA Drivers 5W 100V 100mm (4”) Twin Cone Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

0.33, 0.66, 1.25, 2.5, 5 watts 90dB @ 1kHz ±2dB 100Hz- 15kHz 4 way terminal & line monitoring cap 102mm Ø 107mm

5W 100V 100mm (4”) Twin Cone Low Profile Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

0.33, 0.66, 1.25, 2.5, 5 watts 90dB @ 1kHz ±2dB 100Hz- 15kHz 4 way terminal & line monitoring cap 102mm Ø 54mm

5W 100V 200mm (8”) Twin Cone

REDBACK PA DRIVERS

PA Drivers

redbackaudio.com.au

Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

0.33, 0.66, 1.25, 2.5, 5 watts 93dB @ 1kHz ±2dB 100Hz- 15kHz 2 way screw terminal 185mm Ø 70mm

5W 100V 200mm (8”) Twin Cone Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

0.33, 0.66, 1.25, 2.5, 5 watts 93dB @ 1kHz ±2dB 75Hz- 15kHz 4 way terminal & line monitoring cap 185mm Ø 70mm

15W 100V 200mm (8”) Coaxial 2-Way Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

1.25, 2.5, 5, 10, 15 watts 90dB @ 1kHz ±2dB 45Hz - 20kHz 4 way terminal & line monitoring cap 185mm Ø 94mm

15W 100V 200mm (8”) Twin Cone Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

1.25, 2.5, 5, 10, 15 watts 92dB @ 1kHz ±2dB 100Hz- 15kHz 4 way terminal & line monitoring cap 185mm Ø 77mm

15W 100V 200mm (8”) High Output Power taps: SPL 1W @ 1m: Freq response: Terminal type: Ceiling cutout: Mounting depth:

80

1.25, 2.5, 5, 10, 15 watts 95dB @ 1kHz ±2dB 80Hz- 12kHz 4 way terminal & line monitoring cap 185mm Ø 75mm

Model C 2101C

Model C 2103A

Model C 2109C

Model C 2112C

Model C 2120B

Model C 2118B

Model C 2117B

Ceiling Speakers

Australia’s leading commercial audio supplier for over 45 years.

One-Shot® Ceiling Speakers The One-Shot speaker has revolutionised the way ceiling speakers are installed into ceiling tiles, providing a snap-fit finish in seconds without any screws or fasteners. This reduces installation time compared with traditional speakers by at least 75%. Since the designs inception in the early 2000’s Redback have manufactured over 3 million units.

The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to 10-13mm gyprock tiles, mineral fibre tiles or fixed gyprock ceilings. The One-Shot is a patented and registered design.

T H S E N O SPEAKERS

5W 100V 100mm (4”) Twin Cone

10W 100V 100mm (4”) Twin Cone

5W 100V 100mm (4”) Low Profile

Power taps: 0.33, 0.66, 1.25, 2.5, 5 Watts SPL 1W @ 1m: 92dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Ceiling cutout: 140mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 1.25, 2.5, 5, 7.5, 10 watts SPL 1W @ 1m 94dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Ceiling cutout: 140mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m 90dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Ceiling cutout: 140mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2168C White C 2169 Black

Model: C 2157 White C 2158 Black

Model: C 2150 White

5W 100V 200mm (8”) Twin Cone

5W 100V 200mm (8”) Twin Cone

5W 100V 200mm (8”) With Volume Control

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m 93dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Ceiling cutout: 246mm Ø Terminal type: 2 way screw terminal

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m 93dB @ 1kHz ±2dB Freq response: 75Hz - 15kHz Ceiling cutout: 246mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m 93dB @ 1kHz ±2dB Freq response: 75Hz - 15kHz Ceiling cutout: 246mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2132 White C 2133 Black

Model: C 2134C White C 2135 Black

Model: C 2134VC White CB2134VC Black

81

Ceiling Speakers

redbackaudio.com.au

15W 100V 200mm (8”) Twin Cone

15W 100V 200mm (8”) Coaxial 2-Way

15W 100V 200mm (8”) Twin Cone

Power taps: 1.25, 2.5, 5, 10, 15 watts SPL 1W @ 1m 92dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Ceiling cutout: 246mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 1.25, 2.5, 5, 10, 15 watts SPL 1W @ 1m 90dB @ 1kHz ±2dB Freq response: 45Hz - 20kHz Ceiling cutout: 246mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 1.25, 2.5, 5, 10, 15 watts SPL 1W @ 1m: 95dB @ 1kHz ±2dB Freq response: 55Hz - 15kHz Ceiling cutout: 246mm Ø Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2136

Model: C 2138

Model: C 2142

8 Ohm 200mm (8”) Coaxial 2-Way

8 Ohm 200mm (8”) Twin Cone

8 Ohm 100mm (4”) Coaxial 2-Way

Power rating: SPL 1W @ 1m Freq response: Terminal type: Ceiling cutout:

Power rating: SPL 1W @ 1m Freq response: Terminal type: Ceiling cutout:

Power rating: SPL 1W @ 1m Freq response: Terminal type: Ceiling cutout:

Model: C 2130

50 watts 90dB @ 1kHz ±3dB 50Hz - 20kHz Solder tags 246mm Ø

Model: C 2140

10 watts 92dB @ 1kHz ±2dB 80Hz - 18kHz Solder tags 246mm Ø

10 watts 87dB @ 1kHz ±2dB 80Hz - 20kHz Solder tags 140mm Ø

Model: C 2144

One-Shot® Ceiling Tile Bridge Supports C 2129

Recommended for use with mineral fibre and acoustic ceiling tiles. They are designed to be installed with the One-Shot ceiling speakers, supporting the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the “T-bars” for maximum support for the tile.

Model: C 2129 C 2163 C 2143 C 2164

82

Pan Suit 200mm (8”) Speaker Pan Suit C 2168C / C 2157 100mm (4”) Speaker Pan Suit C 2144 100mm (4”) Speaker Ring Suit 100mm (4”) Speaker

C 2164

Ceiling Speakers

Australia’s leading commercial audio supplier for over 45 years.

Fast-Fix Ceiling Speakers High performance, architecturally unobtrusive speaker/grille combinations which can be painted to match decor. Super easy to install, with a “Flip-Lock” mounting system. Typical applications include shopping malls, restaurants, boutiques, hotel foyers, apartments, offices etc. Models with aluminium grilles are suitable for sheltered outdoor or marine applications. All SPL figures measured at 1KHz ±2dB. All models sold individually.

"Edge to Edge" Grill Series

30W 8 Ohm 2 Way 165mm (6.5”) Coaxial

45W 8 Ohm 2 Way 200mm (8”) Coaxial

5W 100V 165mm (6.5”) Twin Cone

Power rating: SPL 1W @ 1m Freq response: Grille Ceiling cutout: Mounting depth: Terminal type:

Power rating: SPL 1W @ 1m Freq response: Grille Ceiling cutout: Mounting depth: Terminal type:

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m: 91dB @ 1kHz ±2dB Freq response: 90Hz - 20kHz Grille Steel Ceiling cutout: 195mm Ø Mounting depth: 100mm Terminal type: 2 way screw terminal

30 watts 90dB @ 1kHz ±2dB 65Hz - 20kHz Steel ‘Edgeless’ 195mm Ø 68mm Binding posts

Model: C 2179

45 watts 92dB @ 1kHz ±2dB 40Hz - 20kHz Steel ‘Edgeless’ 250mm Ø 98mm Binding posts

Model: C 2181

Model: C 2186

5W 100V 200mm (8”) Twin Cone

15W 100V 2 Way 165mm (6.5”) Coaxial

15W 100V 2 Way 200mm (8”) Coaxial

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m: 89dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Grille Steel ‘Edgeless’ Ceiling cutout: 250mm Ø Mounting depth: 77mm Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 1.25, 2, 5, 10, 15 watts SPL 1W @ 1m: 90dB @ 1kHz ±3dB Freq response: 70Hz - 20kHz Grille Steel ‘Edgeless’ Ceiling cutout: 204mm Ø Mounting depth: 95mm Terminal type: 2 way screw terminal

Power taps: 1.25, 2, 5, 10, 15 watts SPL 1W @ 1m: 90dB @ 1kHz ±3dB Freq response: 45Hz - 20kHz Grille Steel ‘Edgeless’ Ceiling cutout: 244mm Ø Mounting depth: 100mm Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2184

Model: C 2188

Model: C 2190

83

Ceiling Speakers

redbackaudio.com.au

Standard Grill Series BEST SELLER

5W 100V 200mm (8”) Twin Cone Power taps: SPL 1W @ 1m: Freq response: Grille Ceiling cutout: Mounting depth: Terminal type:

0.33, 0.66, 1.25, 2.5, 5 watts 89dB @ 1kHz ±2dB 100Hz - 15kHz Steel 238mm Ø 79mm 2 way screw terminal

Model: C 2125

30W 8 Ohm 2 Way 165mm (6.5”) Coaxial

45W 8 Ohm 2 Way 200mm (8”) Coaxial

Power rating: SPL 1W @ 1m Freq response: Terminal type: Grille Ceiling cutout: Mounting depth:

Power rating: SPL 1W @ 1m Freq response: Terminal type: Grille Ceiling cutout: Mounting depth:

30 watts 90dB @ 1kHz ±2dB 65Hz - 20kHz Binding posts Aluminium 195mm Ø 68mm

Model: C 2119

Model: C 2124 C 2174

45 watts 92dB @ 1kHz ±2dB 40Hz - 20kHz Binding posts Aluminium 238mm Ø 98mm

White Black

5W 100V 165mm (6.5”) Twin Cone Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m: 91dB @ 1kHz ±2dB Freq response: 90Hz - 20kHz Grille Steel Ceiling cutout: 195mm Ø Mounting depth: 100mm Terminal type: 2 way screw terminal

Model: C 2123

5W 100V 200mm (8”) Twin Cone

15W 100V 165mm (6.5”) Coaxial 2-Way

15W 100V 200mm (8”) Twin Cone

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m: 86dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Grille Steel Ceiling cutout: 238mm Ø Mounting depth: 77mm Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 1.25, 2, 5, 10, 15 watts SPL 1W @ 1m: 86dB @ 1kHz ±2dB Freq response: 60Hz - 20kHz Grille Aluminium Ceiling cutout: 195mm Ø Mounting depth: 110mm Terminal type: 2 way screw terminal

Power taps: 1.25, 2, 5, 10, 15 watts SPL 1W @ 1m: 92dB @ 1kHz ±2dB Freq response: 72Hz - 17kHz Grille Aluminium Ceiling cutout: 238mm Ø Mounting depth: 88mm Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2127A

Model: C 2121

Model: C 2126B

84

Ceiling Speakers

Australia’s leading commercial audio supplier for over 45 years.

15W 100V 200mm (8”) Twin Cone

15W 100V 200mm (8”) Coaxial 2-Way

5W 100V 100mm (4”) Twin Cone

Power taps: 1.25, 2, 5, 10, 15 watts SPL 1W @ 1m: 95dB @ 1kHz ±2dB Freq response: 80Hz- 12kHz Grille Aluminium Ceiling cutout: 238mm Ø Mounting depth: 75mm Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 1.25, 2, 5, 10, 15 watts SPL 1W @ 1m: 90dB @ 1kHz ±2dB Freq response: 45Hz - 20kHz Grille Aluminium Ceiling cutout: 238mm Ø Mounting depth: 95mm Terminal type: 4 way screw terminal block & line monitor capacitor

Power taps: 0.33, 0.66, 1.25, 2.5, 5 watts SPL 1W @ 1m 90dB @ 1kHz ±2dB Freq response: 100Hz - 15kHz Grille Aluminium Ceiling cutout: 150mm Ø Mounting depth: 111mm Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2115

Model: C 2128 C 2178

Model: C 2122C

White Black

Specialist PA Speakers

15W 100V 100mm (4”) IP55 Bathroom Speaker Power taps: 2.5, 5, 10, 15W SPL 1W @ 1m: 87dB Freq. response: 70Hz - 12kHz Grille Aluminium Ceiling cutout: 140mm Ø Mounting depth: 125mm Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2097

High Performance 30W 100V 165mm (6.5”) With Back Box

10W 100V 130mm (5”) Vandal Resistant Coaxial Speaker

Power rating: 30W Power taps: 8Ω, 3.75, 7.5, 15, 30W SPL 1W @ 1m 89dB Freq response: 75Hz - 25kHz Ceiling cutout: 220mm Ø Mounting depth: 160mm Terminal type: 4 way screw terminal

Power taps: 1.25, 2.5, 5, 10W SPL 1W @ 1m: 91dB Freq response: 80Hz - 20kHz Grille Steel Ceiling cutout: 155mm Ø Mounting depth: 110mm Terminal type: 4 way screw terminal block & line monitor capacitor

Model: C 2191

Model: C 0887

85

Surface Mount Speakers

redbackaudio.com.au

Surface Mount Speakers 5W 100V 100mm (4”) Twin Cone • AS ISO 7240.24:2018 approved.

• Requires active equalisation.

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

Model CF0703 White CF0704 Black C 0699A Conduit Adaptor Plate.

• SPL: 1W @ 1m 90dB, 5W @ 1m 95dB (1kHz ±2dB) EQ Required

• Frequency response: 100hz - 15kHz • 4 way terminal with line monitor cap.

• Size: 220Ø x 55Hmm. 5W 100V 100mm (4”) Twin Cone

FIRE SURFACE MOUNT SPEAKERS

• AS ISO 7240.24:2018 approved.

• No active equalisation required.

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

Model CF0705 White CF0706 Black C 0699A Conduit Adaptor Plate.

• SPL: 1W @ 1m 91dB, 5W @ 1m 97dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz No EQ Required

• 4 way terminal with line monitor cap.

• Size: 280Ø x 80Hmm. 5W 100V 200mm (8”) Twin Cone • AS ISO 7240.24:2018 approved.

• No active equalisation required.

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

Model CF0715 White CF0716 Black C 0713 Conduit Adaptor Plate.

• SPL: 1W @ 1m 93dB, 5W @ 1m 101dB (1kHz ±2dB) No EQ Required

• Frequency response: 75hz - 15kHz • 4 way terminal with line monitor cap.

• Size: 310Ø x 85Hmm. 15W 100V 200mm (8”) Twin Cone • AS ISO 7240.24:2018 approved.

• No active equalisation required.

• Power taps: 1.25, 2.5, 10, 15W • SPL: 1W @ 1m 96dB, 15W @ 1m 107dB (1kHz ±2dB)

No EQ Required

• Frequency response: 80hz - 12kHz • 4 way terminal with line monitor cap.

• Size: 310Ø x 85Hmm.

86

Model CF0720 White C 0713 Conduit Adaptor Plate.

5W 100V 100mm (4”) Twin Cone

STANDARD SURFACE MOUNT SPEAKERS

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 90dB @ 1kHz ±2dB • Frequency response: 100hz - 15kHz

Surface Mount Speakers

Australia’s leading commercial audio supplier for over 45 years.

Model C 0703A White C 0704A Black C 0699A Conduit Adaptor Plate.

• 4 way terminal with line monitor cap.

• Size: 220Ø x 72Hmm. 5W 100V 200mm (8”) Twin Cone • Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 93dB @ 1kHz ±2dB • Frequency response: 75hz - 15kHz

Model C 0715 White C 0716 Black C 0713 Conduit Adaptor Plate.

• 4 way terminal with line monitor cap.

• Size: 310Ø x 85Hmm. 15W 100V 200mm (8”) Twin Cone • Power taps: 1.25, 2.5, 5, 10, 15W • SPL: 1W @ 1m 95dB @ 1kHz ±2dB • Frequency response: 80hz - 12kHz

Model C 0720 White C 0721 Black C 0713 Conduit Adaptor Plate.

• 4 way terminal with line monitor cap.

• Size: 310Ø x 85Hmm.

Super fast installation - save time & money.

The innovative One-Shot range is moulded from industrial grade plastic and designed to mount directly to the underside of concrete slabs or inaccessible ceilings. Cable entry is from the rear, or via surface mounted conduit (4 x 19mm conduit knockouts provided). The housing is surface mounted with three concealed internal fixing feet. Alternatively, it can be mounted directly to the conduit junction box using an installation plate (shown on right). This is available for both 100mm and 200mm speakers.

Model: C 0699A 100mm (4") Conduit Mounting Plate C 0713 200mm (8") Conduit Mounting Plate

Surface Mount Security Cage Constructed from galvanised mesh this enclosure has been designed to protect the enclosed speaker from physical damage or theft. Great for schools, colleges, train stations, airports, sports grounds etc. Suits: C 0703A, C 0704A, CF0703, CF0704.

Model: C 0706 255W x 260H x 80Dmm (320W inc flanges.)

87

Surface Mount Speakers

redbackaudio.com.au Vandal Resistant 6W 100V Line Surface Mount Speaker

Model C 0886

• Robust all metal casing with security bit access to minimise tampering.

• Suits prisons and public transport facilities.

• 5.25” 130mm twin cone PA driver • Power taps: 0.25, 0.75, 1.5, 3, 6W • SPL: 1W @ 1m 93dB @ 1kHz ±2dB • Frequency response: 180hz - 18kHz • Size: 190W x 190H x 75Dmm.

SURFACE & WALL MOUNT SPEAKERS

10W 100V Line Wall Mount Speaker • Stylish curved ABS cabinet.

Model C 0888

• Steel mesh grille.

• 6.5” 165mm coaxial 2-way PA driver • Power taps: 1.25, 2.5, 5, 10W • SPL: 1W @ 1m 99dB @ 1kHz ±2dB • Frequency response: 110hz - 20kHz • Size: 240L x 330W x 88Dmm. 6W 100V Line Wall Mount Speaker • High impact ABS construction • Tamper proof security screw.

• 6.5” 165mm twin cone PA driver

Model C 0891 C 0895 With Volume Control & Override Relay

• Power taps: 0.75, 1.5, 3, 6W • SPL: 1W @ 1m 93dB @ 1kHz ±2dB • Frequency response: 160hz - 20kHz • Size: 210W x 210H x 85Dmm. 5W 100V Line Wall Mount Speaker Box • Powdercoated steel case with plastic end capping.

• 8” 200mm twin cone PA driver • Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 93dB @ 1kHz ±2dB • Frequency response: 100hz - 15kHz • Size: 264W x 264H x 120Dmm.

88

Model C 0894A C 0896A With Volume Control

Fire Speakers (AS ISO 7240.24) Occupant warning systems are an essential component to all commercial and large scale domestic applications. The Redback Fire Speaker range is designed to cater for the needs of system designers whilst also providing cost & time saving benefits to installers.

Fire Speakers

redbackaudio.com.au

Fire Ceiling Speakers Combines our 'snap fit' One-Shot fast install mechanism with a high efficiency fire compliant speaker driver. This range of ceiling speakers have been engineered to meet the requirements of evacuation and occupant warning paging systems. All components of the fixture are manufactured from high quality, long lasting, flame retardant material and tested to the rigours of the new standard. On site installation will be simple and straight forward. Oversized cable glands and terminal blocks will make on site termination easier than other competing products.

T H S E N O SPEAKERS

Plastic Grille 5W 100mm (4”) Low Profile Fire Speaker • Economical plastic grille.

REDBACK 4” 100MM CEILING SPEAKERS

• Low profile housing with either cable gland or rubber grommet entries.

ActivFire Cert: 3426

• 4 way terminal with line monitor cap.

Grommet Type C 2160A White C 2161A Black

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

ActivFire Cert: 3428

• SPL: 1W @ 1m 89dB, 5W @ 1m 96dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 140mmØ Depth: 60mm.

Aluminium Grille 5W 100mm (4”) Low Profile Fire Speaker • Aluminium grille for a premium finish.

• Low profile housing with either cable gland or rubber grommet entries.

Cable Gland Type C 2260 White C 2261 Black ActivFire Cert: 3427

• 4 way terminal with line monitor cap.

Grommet Type C 2260A White C 2261A Black

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

ActivFire Cert: 3429

• SPL: 1W @ 1m 89dB, 5W @ 1m 96dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 140mmØ Depth: 60mm.

Plastic Grille 5W 100mm (4”) Fire Speaker • Economical plastic grille with original design fire housing.

• 4 way terminal with line monitor cap.

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 90dB, 5W @ 1m 97dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 140mmØ Depth: 117mm.

90

Cable Gland Type C 2160 White C 2161 Black

Cable Gland Type C 2170 White C 2171 Black ActivFire Cert: 3199

4” 100MM

Plastic Grille 10W 100mm (4”) Fire Speaker • Economical plastic grille with original design fire housing.

Fire Speakers

Australia’s leading commercial audio supplier for over 45 years.

Cable Gland Type C 2172 White C 2173 Black ActivFire Cert: 3565

• 4 way terminal with line monitor cap.

• Power taps: 1.25, 2.5, 5, 7.5, 10W • SPL: 1W @ 1m 90dB, 10W @ 1m 99dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 140mmØ Depth: 117mm.

Plastic Grille 5W 200mm (8”) Fire Speaker • Economical plastic grille.

Cable Gland Type CF2134 White CF2135 Black ActivFire Cert: 3573

• Low profile housing with either cable gland wiring entries.

• 4 way terminal with line monitor cap.

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

REDBACK 8” 200MM CEILING SPEAKERS

• SPL: 1W @ 1m 94dB, 5W @ 1m 100dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 246mmØ Depth: 98mm.

Plastic Grille 15W 200mm (8”) Fire Speaker • Economical plastic grille.

Cable Gland Type CF2142 White CF2143 Black ActivFire Cert: 3572

• Low profile housing with either cable gland wiring entries.

• 4 way terminal with line monitor cap.

• Power taps: 1.25, 2.5, 5, 10, 15W • SPL: 1W @ 1m 95dB, 15W @ 1m 104dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 246mmØ Depth: 98mm.

Plastic Grille 15W Coaxial 2-Way 200mm (8”) Fire Speaker • High performance coaxial driver.

• Low profile housing with either cable gland wiring entries.

Cable Gland Type CF2138 White CF2139 Black ActivFire Cert: pending

• 4 way terminal with line monitor cap.

• Power taps: 1.25, 2.5, 5, 10, 15W • Frequency response: 50Hz-10kHz • SPL: 1W @ 1m 90dB, 15W @ 1m 101dB (1kHz ±2dB) • Cutout: 246mmØ Depth: 98mm.

91

Fire Speakers

redbackaudio.com.au Aluminium Grille 5W 200mm (8”) Fire Speaker • Aluminium grille for a premium finish.

• Low profile housing with either cable gland wiring entries.

Cable Gland Type CF2234 White CF2235 Black ActivFire Cert: pending

• 4 way terminal with line monitor cap.

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W

REDBACK 8” 200MM CEILING SPEAKERS

• SPL: 1W @ 1m 94dB, 5W @ 1m 100dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 246mmØ Depth: 98mm.

Aluminium Grille 15W 200mm (8”) Fire Speaker • Aluminium grille for a premium finish.

• Low profile housing with either cable gland wiring entries.

Cable Gland Type CF2242 White CF2243 Black ActivFire Cert: pending

• 4 way terminal with line monitor cap.

• Power taps: 1.25, 2.5, 5, 10, 15W • SPL: 1W @ 1m 95dB, 15W @ 1m 106dB (1kHz ±2dB) • Frequency response: 100hz - 15kHz • Cutout: 246mmØ Depth: 98mm.

Aluminium Grille 15W Coaxial 2 Way 200mm (8”) Fire Speaker • High performance coaxial driver.

Cable Gland Type CF2238 White CF2239 Black ActivFire Cert: 3685

• Aluminium grille for a premium finish.

• Low profile housing with either cable gland wiring entries.

• 4 way terminal with line monitor cap.

• Power taps: 1.25, 2.5, 5, 10, 15W • SPL: 1W @ 1m 90dB, 15W @ 1m 101dB (1kHz ±2dB) • Frequency response: 50hz - 10kHz • Cutout: 246mmØ Depth: 117mm.

One-Shot® Ceiling Tile Bridge Supports

C 2165

Recommended for use with mineral fibre and acoustic ceiling tiles. They are designed to be installed with the One-Shot ceiling speakers, supporting the ceiling tile to minimise sag and reduce damage to soft tiles. Fits inside the “T-bars” for maximum support for the tile.

Model: C 2165 Pan Suit 100mm (4”) Fire Speakers C 2129 Pan Suit 200mm (8”) Fire Speakers

92

C 2129

One-Shot MK2 10W 100V Line ABS Horn Fire Speaker • AS ISO 7240.24:2018 approved.

• Twist cap top for easy cable termination.

• Requires no external equalisation for AS ISO7240.24 fire systems.

Fire Speakers

Australia’s leading commercial audio supplier for over 45 years.

Models CF2050G​ Grey CF2050B​ Black CF2050W​ White ActivFire Cert: 3684

• Weather resistant and UV stabilised.

HORN SPEAKERS

• Stainless steel hardware No EQ Required

• Dog leg mounting bracket • SPL: 1W @ 1m 104dB, 10W @ 1m 112dB (1kHz ±2dB) • Frequency response: 100Hz - 12.5kHz One-Shot 10W 100V Line ABS Horn Fire Speaker

Models CF2053G​ Grey

• AS ISO 7240.24:2018 approved.

ActivFire Cert: 3200

• Twist cap top for easy cable termination.

• Meets AS ISO7240.24 for fire & evacuation installations with external EQ applied.

• Weather resistant and UV stabilised.

• Stainless steel hardware EQ Required

• Dog leg mounting bracket • SPL: 1W @ 1m 98dB, 10W @ 1m 110dB (1kHz ±2dB) • Frequency response: 250Hz-10kHz

SOUND PROJECTOR

One-Shot 20W 100V Line ABS Sound Projector Fire Speaker • AS ISO 7240.24:2018 approval pending.

• Twist cap top for easy cable termination.

• Requires no external equalisation for AS ISO7240.24 fire systems.

Models CF1520G​ Grey CF1520B​ Black CF1520W​ White ActivFire Cert: pending

• Weather resistant and UV stabilised.

• Stainless steel hardware No EQ Required

• Dog leg mounting bracket • SPL: 1W @ 1m 92dB, 10W @ 1m 112dB (1kHz ±2dB) • Frequency response: 180Hz - 12kHz

The Patented Redback Twist Cap. Our twist lock cap makes internal termination easy! Saving installers time and money.

Typically to terminate cabling internally on a horn speaker it involves removing four screws on the rear cover, connecting the cable and then re-installing the same screws.

As you can imagine, doing this up a ladder can get quite fiddly! The One-Shot horn eliminates screw removal by utilising a patented twist lock mechanism. The installer simply twists off the rear cover, connects the cabling and twists the cover back on!

The labour savings by using the One-Shot horn on a large job are significant.

93

Fire Speakers

redbackaudio.com.au 5W 100V 100mm (4”) Twin Cone • AS ISO 7240.24:2018 approved.

• Requires active equalisation.

Model CF0703 White CF0704 Black ActivFire Cert: 3425

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 90dB, 5W @ 1m 95dB (1kHz ±2dB) EQ Required

C 0699A Conduit Adaptor Plate.

• Frequency response: 100hz - 15kHz • 4 way terminal with line monitor cap.

• Size: 220Ø x 55Hmm. 5W 100V 100mm (4”) Twin Cone

FIRE SURFACE MOUNT SPEAKERS

• AS ISO 7240.24:2018 approved.

• No active equalisation required.

Model CF0705 White CF0706 Black ActivFire Cert: 3686

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 91dB, 5W @ 1m 97dB (1kHz ±2dB)

C 0699A Conduit Adaptor Plate.

• Frequency response: 100hz - 15kHz No EQ Required

• 4 way terminal with line monitor cap.

• Size: 280Ø x 80Hmm. 5W 100V 200mm (8”) Twin Cone • AS ISO 7240.24:2018 approved.

• No active equalisation required.

Model CF0715 White CF0716 Black ActivFire Cert: 3295

• Power taps: 0.33, 0.66, 1.25, 2.5, 5W • SPL: 1W @ 1m 93dB, 5W @ 1m 101dB (1kHz ±2dB) No EQ Required

C 0713 Conduit Adaptor Plate.

• Frequency response: 75hz - 15kHz • 4 way terminal with line monitor cap.

• Size: 310Ø x 85Hmm. 15W 100V 200mm (8”) Twin Cone • AS ISO 7240.24:2018 approved.

Model CF0720 White ActivFire Cert: 3564

• No active equalisation required.

• Power taps: 1.25, 2.5, 10, 15W • SPL: 1W @ 1m 96dB, 15W @ 1m 107dB (1kHz ±2dB) No EQ Required

• Frequency response: 80hz - 12kHz • 4 way terminal with line monitor cap.

• Size: 310Ø x 85Hmm.

For accessories to suit surface mount speakers, see page 87.

94

C 0713 Conduit Adaptor Plate.

Australia’s leading commercial audio supplier for over 45 years.

Model Index.

A 1709 A 1715 A 1717A A 1720B A 1741C A 1760 A 1922 A 1932 A 1937 A 1980B A 1982B A 2055A A 2064 A 2069 A 2070B A 2078B A 2080C A 2081 A 2096 A 2232-37 A 2260-67A A 2270 A 2272 A 2280B A 2285A A 2287A A 2339 A 2347 A 2365 A 2510A A 2513 A 2514 A 2517 A 2519 A 2522 A 2524 A 2630 A 2651 A 2548 A 2696A A 2702A A 2704B A 2706F A 2711 A 2734 A 4017 A 4022 A 4024 A 4026 A 4037 A 4043 A 4047 A 4116 A 4205 A 4210 A 4212 A 4230A A 4235A A 4240A A 4245A A 4250A A 4255A A 4260A A 4262A A 4270

50 Event 4 Output 24 Hour 7 Day Timer DIN Rail MP3/SD Message Player 4 Way MP3 Message Player MP3/SD Tone Gen & Message Player Module MP3/SD Tone Generator + Message Player Microphone Delay/Mic-Line Recorder Amplifier Module 60W Amplifier Module 120W Amplifier Module 250W 25W (35W Max) PA Megaphone Alert/Evac 25W (35W Max) PA Megaphone Balanced Mic / Line Input Pre-Amp & Mixer Lockdown / Fire / Cancel Remote Wall Plate Remote Lockdown Wallplate for A 4505C Tone Generator Alert/Evac With Voiceover Chip Wallplate to suit Alert/Evac Controller Selection Panel 10 Zone PA Wallplate to suit Alert/Evac Controller Firephone Warden Intercom Point (WIP) 100V Line Attenuators - Clipsal Pro Series 100V Line Attenuators 100V Line Attenuator 10W Surface Mount 100V Line Attenuator 40W Surface Mount Remote Volume Control Wallplate Line Level Volume Controller Line Level Volume Control With Local Input Volume Control 100W 100V Line Volume Control 5 Zone Evac 40W / 100V Line Volume Control 5 Zone Evac 100W / 100V Line Passive DI Box 600 Ohm to 10K Ohm Unbalanced Converter 10K Ohm to 600 Ohm Balanced Converter Unbalanced Stereo Line Isolator Balanced 600 Ohm - 600 Ohm Line Isolator Balanced 10K Ohm - 600 Ohm Line Isolator Balanced 10K Ohm - 10K Ohm Line Isolator 4 Channel Headphone Amplifier 6 Channel Mixing Desk With USB 4 Channel Mixer With USB & Effects Wi-Fi Internet Audio Player With DAB+/FM AM/FM Analog Tuner Dual AM/FM RS232 Stereo Tuner Tuner & CD/USB/Bluetooth Audio Player USB/SD Music Player For Phase 5 Mixers CD/DAB+/FM Audio Player 15W PA Amplifier 30W 2 Input 100V PA Amplifier 30W 3 Input 100V PA Amplifier 30W 3 Input 100V PA Amplifier (Rack Mount) Phase5 40W 3 Input 100V PA Amplifier Phase5 60W 3 Input 100V PA Amplifier Phase5 100W 3 Input 100V PA Amplifier 15W 8 Ohm Stereo PA Amplifier 3VA Kiosk Hearing Induction Loop Amplifier 80VA Hearing Induction Loop Amplifier 280VA Hearing Induction Loop Amplifier 1RU PA Power Amplifier 30W 1RU PA Mixer Amplifier 30W 1RU PA Power Amplifier 60W 1RU PA Mixer Amplifier 60W 1RU PA Power Amplifier 100W 1RU PA Mixer Amplifier 100W 100V Class H Bluetooth PA Mixer Amp 120W 100V Class D Bluetooth PA Mixer Amp 240W Phase5 125W 4 Zone 100V PA Amplifier

45 21 21 21 21 22 15 15 15 53 53 29 51 51 52 49 43 49 53 42 42 43 43 8 42 42 42 43 43 28 28 28 28 28 28 28 27 27 27 20 20 20 20 9 20 6 6 7 7 7 7 7 6 16 16 16 12 12 12 12 12 12 11 11 10

A 4275C A 4280 A 4285C A 4310 A 4312 A 4314 A 4316A A 4370A A 4372 A 4373 A 4377A A 4379 A 4380A A 4387A A 4389 A 4390A A 4395A A 4411 A 4420C A 4422 A 4424 A 4427 A 4432 A 4433 A 4435 A 4450 A 4460 A 4461 A 4462 A 4463 A 4464 A 4469 A 4476 A 4480B A 4481 A 4486 A 4487 A 4488 A 4489A A 4493 A 4498 A 4500C A 4505C A 4506 A 4510A A 4512 A 4564 A 4565A A 4566 A 4567B A 4568 A 4573 A 4574 A 4576 A 4577 A 4578 A 4579 A 4580 A 4581 A 4582 A 4586 A 4587 A 4595A A 4596 A 4597

Phase5 PA Mixer Amplifier 125W 6 Input Phase5 250W 4 Zone 100V PA Amplifier Phase5 PA Mixer Amplifier 250W 6 Input Class D PA Amplifier 4x120W Class D PA Amplifier 2x240W Class D PA Amplifier 4x240W Class H PA Amplifier 2x500W Phase5 PA Power Amplifier 125W Phase5 PA Amplifier 2x125W Digital Volume Board Option for Phase5 Amps Phase5 PA Mixer Amplifier 125W 3 Input Phase5 PA Mixer Amplifier 125W 6 Input Phase5 PA Power Amplifier 250W Phase5 PA Mixer Amplifier 250W 3 Input Phase5 PA Mixer Amplifier 250W 6 Input Phase5 PA Power Amplifier 500W PA Mixer Amplifier 500W 2 Input 4 Channel PA Stereo Mixer 8 Channel PA Mixer 4 Channel PA Mixer With Bass & Treble 6 Input / 2 Output PA Mixer 8 Channel PA Mixer With Tone Generator 4+4 Channel PA Mixer Source Switching Wallplate (To Suit A 4432) 4 Channel PA Mixer With Message Player 4x4 Audio Source Matrix Mixer Switch 4x8 Stereo Audio Matrix Switcher Master LCD Touch Wallplate 7" Black Zone LCD Touch Wallplate 4.3" Black Master LCD Touch Wallplate 7" White Zone LCD Touch Wallplate 4.3" White 4 Zone Paging Relay Box Preset Selection Wallplate to suit A4480A 8 Input to 8 Output Audio Matrix Switcher Paging Microphone Console to suit A 4480B Single Zone Line Level Paging Microphone Line Output Box To suit A4486 Paging Mic Four Zone Paging Microphone 4 Zone Paging Relay Box to suit A 4488 Input Source Selection Remote Plate Ethernet Adaptor Pack 50 Event 24 Hour 7 Day Timer W/Tone Gen 7 Day Timer With Lockdown & Fire Alarm Control 6A 24V SLA Battery Charger Yearly Programmable School Timer 12A 24V SLA Battery Charger Paging Console With Alert/Evac/Chime Control Emergency Alert & Evacuation Controller In-Line 22uF Speaker line Isolator Box 10 Zone Line Monitoring Unit Zone Status Interface To Suit A 4567B Alert/Evac Tone Generator Module Emergency Alert & Evacuation Tone Generator 1 Zone Universal Remote Alarm Wallplate 6 Zone Universal Remote Alarm Wallplate Wallplate to suit Alert/Evac Controller Remote Isolate Timer Wallplate 16 Zone Paging System Controller Wallplate to suit Alert/Evac Controller 10 Zone Monitor Panel 16 Zone Paging Console to suit A 4585 17-32 Zone Paging Console Expander Lockdown Warning Evacuation Controller Paging Console With Lockdown Control Fire Alarm Test Wallplate

9 10 9 13 13 13 13 14 13 8 8 8 14 8 8 14 11 33 31 30 31 32 33 33 32 35 35 38 38 38 38 26 36 36 36 26 26 26 26 37 51 48 51 54 45 54 49 49 53 44 44 8 52 53 53 48 48 23 48 44 23 23 50 50 49

A 4598 A 4599 A 4650 A 4660 A 4860 A 4861 A 4865 A 4868 A 4872 A 4903A A 4904 A 4905 A 4906 A 4911 A 4915 A 4928 A 4930 A 4931 A 4932 A 4935 A 4937 A 4940 A 4941 A 4942 A 4944 A 4946 A 4948 A 4950 A 4952 A 4953 A 4954 A 4960 A 4962 A 5131 A 5135 A 5138 A 5330 A 6505A A 6507 A 6510 A 6512 A 6514 A 6515 A 6530 A 6531 A 6540 A 6541 C 0324 C 0325 C 0326 C 0327 C 0333 C 0334 C 0335 C 0351A C 0354 C 0356 C 0361 C 0363 C 0369 C 0370 C 0373 C 0375 C 0377 C 0379

Remote Lockdown Wallplate Lockdown/Chime/Fire/Cancel Wall Plate 12x16 Audio Matrix Controller Paging Console 7" LCD Touchscreen 2 x 50W Stereo Amp With Bluetooth 200W Subwoofer Amplifier IP System Encoder IP Paging Console Controller Zone IP Decoder 100V Line to Low/High Level Adaptor 1 In to 2 Out Audio Splitter Mic/Line Pre-Amplifier to Line Level Out Mic/Line/100V Input to Line Level Converter 2 Input Mini Mixer With Vox Muting 2 Input Mini Mixer With Vox Muting (XLR) Single Output Microphone/Line Hub 4 Output Microphone / Line Hub Microphone/Line Pre Amplifier Wallplate Balanced Microphone/Line UTP Pre Amplifier 3 Input XLR Mic/Line Pre-Amp Wallplate 3 Input XLR Mic/Line Pre-Amp BT Wallplate 3 Pin XLR Cat5 UTP Extender (Transmitter) 3 Pin XLR Cat5 UTP Wallplate (Transmitter) 3 Pin XLR Cat5 UTP Extender (Receiver) RCA To Cat5 UTP Extender (Transmitter) RCA To Cat5 UTP Extender (Receiver) Line Level Compressor/Limiter Paging Microphone Chime Module 5 Pin XLR Cat5 UTP Extender (Transmitter) 5 Pin XLR Transmitter Wallplate 5 Pin XLR Cat5 Extender (Receiver) Microphone Network System Transmitter Microphone Network System Receiver 4 Input 3 Tier Priority PA Mixer 4 Output Microphone Hub Mic Wallplate to suit A 5135 Microphone Hub 31 Band Graphic Equaliser 3 Relay & 2 Serial RS232/485 Control Hub RS485 Serial 100V Line Attenuator 12 Relay Ch. RS232/485 Serial Control Hub RS232/485 Single Serial Volume Controller RS232/485 Dual Serial Volume Controller 2 Relay RS232/485 Serial Control Hub 7" Black Programmable Touch Plate 7" White Programmable Touch Plate 4.3" Black Programmable Touch Plate 4.3" White Programmable Touch Plate 3 Pin XLR Supermarket Paging Microphone 5 Pin XLR Supermarket Paging Microphone 5 Pin XLR (90 Deg.) Supermarket Paging Mic Gooseneck Supermarket Paging Microphone CB Type Microphone 0.5m Curly Cord CB Type Balanced Microphone 5 Pin XLR CB Type Balanced Microphone 0.5m Curly Cord Professional Electret Boundary Microphone 3 Pin XLR Gooseneck Dynamic PTT Microphone Phantom Powered Choir Microphone Phantom Powered Electret Shotgun Microphone Dynamic Lectern Mic With Screw Mounting Phantom Powered Electret Lectern Microphone Dynamic Low Impedance Lectern Microphone Dynamic Lectern Microphone With Switch 3 Pin XLR Slimline Desktop Paging Microphone 3 Pin XLR Desktop Paging Microphone 5 Pin XLR Desktop Paging Microphone

50 51 38 38 15 15 24 24 24 29 28 29 29 28 28 18 18 39 18 19 19 19 19 19 19 19 29 22 19 19 19 26 26 30 22 22 27 40 41 41 41 41 41 41 41 41 41 61 61 61 63 61 61 61 64 62 64 63 63 63 62 62 62 62 62

95

redbackaudio.com.au C 0383 C 0388 C 0392 C 0398 C 0699A C 0703A C 0704A C 0706 C 0713 C 0715 C 0716 C 0720 C 0721 C 0886 C 0887 C 0888 C 0891 C 0894A C 0895 C 0896A C 0902 C 0903 C 0904 C 0905 C 0907 C 0908 C 0912 C 0913 C 0917A C 0918A C 0922 C 0923 C 0927 C 0929 C 0936 C 0937 C 0938 C 0946 C 0951A C 0957A C 1050 C 1051 C 1055A C 1057 C 1058 C 1060 C 1065 C 1066 C 1070 C 1520 C 1522 C 1549 C 2020 C 2022 C 2026 C 2035 C 2040 C 2042 C 2045 C 2047 C 2048 C 2050 C 2051 C 2053 C 2054 C 2056 C 2057 C 2058 C 2059 C 2060 C 2062

96

Drop-Proof 600 Ohm Handheld Microphone Unidirectional Dynamic Handheld Microphone Unidirectional Handheld Microphone Lapel Condenser Microphone 100mm Speaker Conduit Install Bracket 100mm 5W 100V White Surface Speaker 100mm 5W 100V Black Surface Speaker Surface Speaker Vandal Resistant Cage 200mm Speaker Conduit Install Bracket 200mm 5W 100V White Surface Speaker 200mm 5W 100V Black Surface Speaker 200mm 15W 100V White Surface Speaker 200mm 15W 100V Black Surface Speaker 6W 130mm 100V Vandal Res. Ceiling Speaker 10W 130mm 100V Vandal Res. Ceiling Speaker 10W 165mm 100V Surface "Arc" Wall Speaker 6W 165mm 100V Surface ABS Wall Speaker 5W 200mm 100V Wall Mount Box Speaker 6W 165mm 100V Surface Wall Speaker V/C 5W 100V 200mm Wall Box Speaker V/C 30W 8 Ohm/100V White Speaker Pair 30W 8 Ohm 100V Black Speaker Pair 30W 8 Ohm White Speaker Monitor 30W 8 Ohm Black Speaker Monitor 30W 100V White Speaker Monitor 30W 100V Black Speaker Monitor 45W 100V 8 Ohm White Speaker Pair 45W 100V 8 Ohm Black Speaker Pair 50W / 85W 100V 8 Ohm White Speaker Pair 50W / 85W 100V 8 Ohm Black Speaker Pair 50W 100V/8 Ohm White Speaker Pair 50W 100V/8 Ohm Black Speaker Pair 130mm 30W 2 Way White Active Speaker Pair 165mm 50W 2 Way White Active Speaker Pair 40W 2 Way 8 Ohm White Wall Speaker 40W 2 Way 8 Ohm Black Wall Speaker 40W 2 Way 8 Ohm/100V White Wall Speaker 30W 2 Way 8 Ohm/100V White Wall Speakers 20W 100V IP66 White Column Speaker 40W 100V IP66 White Column Speaker 15W 100V White Ball Pendant Ceiling Speaker 15W 100V Black Ball Pendant Ceiling Speaker 30W 100V IP55 Ball Pendant Ceiling Speaker 30W 100V White Pendant Ceiling Speaker 30W 100V Black Pendant Ceiling Speaker 30W 100V Black Ball Pendant Ceiling Speaker Ceiling Mount 10" 240W Subwoofer Tile Bridge Support For C 1065 Subwoofer 35W 100V Line Ball Ceiling Speaker 20W 100V IP65 Sound Projector 20W 100V IP65 Bi-Directional Sound Projector 20W 100V IP65 Sound Projector Black 10W 8 Ohm IP66 Plastic Horn Speaker 30W 8 Ohm Plastic Horn Speaker 25W 8 Ohm IP65 Plastic Horn Speaker IP Horn Speaker 10W 100V IP66 Plastic Horn Speaker 20W 100V IP66 Plastic Horn Speaker 30W 100V IP66 Plastic Horn Speaker 30W 100V IP67 Plastic Horn Speaker 10W 100V IP66 Plastic Marine Horn Speaker 10W 100V IP66 Grey Plastic Horn Speaker 10W 100V IP66 White Plastic Horn Speaker 10W 100V IP66 Plastic Horn Speaker Wall Mount Horn Speaker Cage 20W 100V IP66 Plastic Horn Speaker 30W 100V IP66 Plastic Horn Speaker Ceiling Mount Horn Speaker Cage 40W 100V IP65 Plastic Horn Speaker 10W 100V IP66 Black Plastic Horn Speaker 21" Flare to suit C 2064 Compression Driver

61 61 61 60 87 87 87 87 87 87 87 87 87 88 85 88 88 88 88 88 77 77 78 78 78 78 77 77 77 77 77 77 79 79 78 78 78 78 75 75 74 74 74 74 74 74 79 79 74 76 76 76 73 73 73 25 71 71 71 71 70 70 70 70 73 70 70 73 72 70 73

C 2064 C 2070 C 2077 C 2083 C 2090 C 2092 C 2095 C 2097 C 2101C C 2103A C 2107 C 2109C C 2112C C 2115 C 2117B C 2118B C 2119 C 2120B C 2121 C 2122C C 2123 C 2124 C 2125 C 2126B C 2127A C 2128 C 2129 C 2130 C 2132 C 2133 C 2134C C 2134VC CB2134VC C 2135 C 2136 C 2138 C 2140 C 2142 C 2143 C 2144 C 2150 C 2157 C 2160 C 2160A C 2161 C 2161A C 2163 C 2164 C 2165 C 2168C C 2169 C 2170 C 2171 C 2172 C 2173 C 2174 C 2178 C 2179 C 2181 C 2184 C 2186 C 2188 C 2190 C 2191 C 2260 C 2260A C 2261 C 2261A C 5210 C 5220 C 5285

60W 100V Compression Horn Driver 30W 100V IP67 Plastic Music Horn Speaker 30W 100V IP65 Music Horn Speaker 12W 100V IP67 Marine Horn Speaker 60W 100V IP66 High Efficiency Horn Speaker 100W 100V IP66 High Efficiency Horn Speaker IP Ceiling Speaker 100mm (4") 15W 100V IP55 Ceiling Speaker 100mm (4") 5W 100V Twin Cone PA Driver 100mm (4") 5W 100V Low Profile PA Driver 100mm (4") 10W 100V Twin Cone PA Driver 200mm (8") 5W 100V Twin Cone PA Driver 200mm (8") 5W 100V Twin Cone PA Driver 200mm (8") 15W 100V Fastfix Ceiling Speaker 200mm (8") 15W 100V PA Driver 200mm (8") 15W 100V PA Driver 165mm (6.5") 30W Fastfix Ceiling Speaker 200mm (8") 15W 100V Coaxial PA Driver 165mm (6.5") 15W 100V Fastfix Ceiling Speaker 100mm (4") 5W 100V Fastfix Ceiling Speaker 165mm (6.5") 5W 100V Fastfix Ceiling Speaker 165mm (6.5") 30W Fastfix Ceiling Speaker 200mm (8") 5W 100V Fastfix Ceiling Speaker 200mm (8") 15W 100V Fastfix Ceiling Speaker 200mm (8") 5W 100V Fastfix Ceiling Speaker 200mm (8") 15W 100V Fastfix Ceiling Speaker Ceiling Tile Bridge for 8" One-Shot Speakers 200mm (8") 50W 8 Ohm White One-Shot Spkr 200mm (8") 5W 100V White One-Shot Spkr 200mm (8") 5W 100V Black One-Shot Spkr 200mm (8") 5W 100V White One-Shot Spkr 200mm (8") 5W 100V One-Shot Spkr V/C 200mm (8") 5W 100V One-Shot Spkr Black V/C 200mm (8") 5W 100V Black One-Shot Spkr 200mm (8") 15W 100V White One-Shot Spkr 200mm (8") 15W 100V White One-Shot Spkr 200mm (8") 10W 8 Ohm White One-Shot Spkr 200mm (8") 15W 100V White One-Shot Spkr Ceiling Tile Bridge for 4" One-Shot Speakers 100mm (4") 10W 8 Ohm White One-Shot Spkr 100mm (4") 5W 100V White One-Shot Spkr 100mm (4") 10W 100V White One-Shot Spkr 100mm (4") 100V 5W White Fire Spkr 100mm (4") 100V 5W White Fire Spkr 100mm (4") 100V 5W Black Fire Spkr 100mm (4") 100V 5W Black Fire Spkr Ceiling Tile Bridge for 4" One-Shot Speakers Support Split Ring to suit 4" One-Shot Ceiling Tile Bridge for 4" One-Shot Speakers 100mm (4") 100V 5W White One-Shot Speaker 100mm (4") 100V 5W Black One-Shot Speaker 100mm (4") 100V 5W White Fire Speaker 100mm (4") 100V 5W Black Fire Speaker 100mm (4") 100V 10W White Fire Speaker 100mm (4") 100V 10W Black Fire Speaker 200mm (8") 45W 8 Ohm Fastfix Ceiling Spkr 200mm (8") 15W 100V Fastfix Ceiling Spkr 165mm (6.5") 30W 8 Ohm Fastfix Ceiling Spkr 200mm (8") 45W 8 Ohm Fastfix Ceiling Spkr 200mm (8") 5W 100V Fastfix Ceiling Spkr 165mm (6.5") 5W 100V Fastfix Ceiling Spkr 165mm (6.5") 15W 100V Fastfix Ceiling Spkr 200mm (8") 15W 100V Fastfix Ceiling Spkr 165mm (6.5") 30W 100V Fastfix Ceiling Spkr 100mm (4") 100V 5W White Metal Fire Spkr 100mm (4") 100V 5W White Metal Fire Spkr 100mm (4") 100V 5W Black Metal Fire Spkr 100mm (4") 100V 5W Black Metal Fire Spkr 100W Floor Subwoofer 8 Ohm/100V Line 10" Outdoor IP65 Rated 150W Subwoofer Spkr 2.75" 10W Mini Satellite Speaker Pair

73 72 72 71 72 72 25 85 80 80 80 80 80 85 80 80 84 80 84 85 84 84 84 84 84 85 92 82 81 81 81 81 81 81 82 82 82 82 82 82 81 81 90 90 90 90 82 82 92 81 81 90 90 91 91 84 85 83 83 83 83 83 83 85 90 90 90 90 79 79 77

C 8841A C 8842A C 8843A C 8844B C 8846B C 8847 C 8860B C 8862B C 8864B C 8867C C 8868C C 8881B C 8882B C 8884 C 8890D C 8892D C 8893D C 8909 C 8911A C 8912A C 8913B C 8914 C 8915 CF0703 CF0704 CF0705 CF0715 CF0716 CF0720 CF1520G CF1520B CF1520G CF2050B CF2050G CF2050W CF2053G CF2134 CF2135 CF2138 CF2139 CF2142 CF2143 CF2234 CF2235 CF2238 CF2239 CF2242 CF2243 MB1140 Q 2004 Q 2012 Q 2014 S 0080 S 0082 S 0083 S 0084 S 0086 S 0088 S 5416 S 5423 S 6150

Ceiling Mount UHF Mic System Antenna UHF Wireless Mic Antenna Booster BNC Antenna Booster Mounting Bracket BNC Type UHF Mic Antenna Splitter / Combiner UHF Mic System Antenna Divider Dipole UHF Array Paddle Antenna Pair Auto-Scan UHF Wireless Mic Receiver Wireless Electret UHF Mic Handheld Wireless UHF Beltpack UHF Wireless Microphone System W/HH UHF Wireless Microphone System W/Bpack UHF Wireless Mic System W/2xHH UHF Wireless Mic System W/HH & Bpack UHF Wireless Mic System W/2xHH UHF Wireless Mic System 700 Ch RX Wireless UHF Handheld Condenser Mic 700 Ch Wireless UHF Beltpack Transmitter 700 Ch Guitar Interface Lead For UHF Beltpacks Aerobics Headband Microphone Skintone Headband Presenters Microphone Light Weight Lecture Headband Microphone Light Weight Skintone Lecture Microphone Beltpack Transmitter Belt Pouch 100mm 5W 100V White Surface Fire Speaker 100mm 5W 100V Black Surface Fire Speaker 100mm 5W 100V Surface Fire Speaker 200mm 5W 100V White Surface Fire Speaker 200mm 5W 100V Black Surface Fire Speaker 200mm 15W 100V White Surface Fire Speaker 20W 100V Grey Fire Sound Projector 20W 100V Grey Fire Sound Projector 20W 100V Grey Fire Sound Projector 10W 100V IP66 Black Fire Horn Speaker 10W 100V IP66 Grey Fire Horn Speaker 10W 100V IP66 White Fire Horn Speaker 10W 100V IP66 Grey Fire Horn Speaker 200mm 100V 5W White Ceiling Fire Speaker 200mm 100V 5W Black Ceiling Fire Speaker 200mm 100V 15W White Ceiling Fire Speaker 200mm 100V 15W Black Ceiling Fire Speaker 200mm 100V 15W White Ceiling Fire Speaker 200mm 100V 15W Black Ceiling Fire Speaker 200mm 100V 5W White Metal Ceiling Fire Spkr 200mm 100V 5W Black Metal Ceiling Fire Spkr 200mm 100V 15W White Metal Ceiling Fire Spkr 200mm 100V 15W Black Metal Ceiling Fire Spkr 200mm 100V 15W White Metal Ceiling Fire Spkr 200mm 100V 15W Black Metal Ceiling Fire Spkr 100V To 8 Ohm Speaker Transformer Adapter Digital Audio Impedance Meter Handheld Current Loop Tester Handheld Audio Generator 50 Event 4 Output DIN Rail Timer 12V-24V DIN Rail Timer With Delay Latching Relay Module 12-24V DC Adjustable Flasher Temperature Controlled DIN Rail Switch DIN Rail Event Counter Indicator & Siren Wallplate Low Power Fire & Evacuation Strobe Custom MP3 24V DC Signalling Horn Speaker

59 59 59 59 59 59 57 57 57 56 56 57 57 56 58 58 58 58 60 60 60 60 58 94 94 94 94 94 94 93 93 93 93 93 93 93 91 91 91 91 91 91 92 92 92 92 92 92 43 44 16 16 46 46 53 53 46 46 52 52 21

Industry leading warranty.

10

5

Year

Year

EQUIPMENT WARRANTY ON AUSTRALIAN MADE.

SPEAKER PERFORMANCE WARRANTY.

10 Year Manufacturer Equipment Warranty.

5 Year PA Speaker Performance Warranty.

In 2005 we lead the way with a DECADE warranty on our Australian Made products. Many years on it remains the best in the industry, providing installers and end users with peace of mind.

Our stringent quality control enables us to offer our industry first 5 year warranty on most of our public address speaker range, including One-Shot and Fast-Fix ranges.

For more information on any of the products in this catalogue, please visit:

www.redbackaudio.com.au

Professional Audio Products redbackaudio.com.au

Redback® is exclusively distributed by Altronics.

Altronics is both the manufacturer and exclusive distributor or Redback products worldwide.

Head Office

Brisbane

Sydney

Adelaide

174 Roe St, Perth WA 6000 (08) 9428 2122 wsale@altronics.com.au 15 Short St, Auburn NSW 2144 (02) 8748 5399 nsw@altronics.com.au

4/18 Riverland Drive, Loganholme QLD 4129 (07) 3441 2899 qld@altronics.com.au 316 Main North Road, Prospect SA 5082 (08) 8164 3460 sa@altronics.com.au

Melbourne

891 Princes Highway, Springvale VIC 3171 (03) 9549 2199 vic@altronics.com.au

For the full Altronics product range, please consult our complete parts catalogue or visit altronics.com.au.