Material Safety Data Sheet Hi-Ten Universal
Sheet No: M006FR Revision: 1 Pages:
Issued: st
1 Issue:
24/04/12 16/06/05
1 of 5
1. Identification of the substrate/preparation and of the company/undertaking 1.1
Identification/Trade name: Hi-Ten Universal
1.2
Use of the substance/preparation: Modified bituminous waterproofing membrane
1.3
Manufacturer/Supplier: Supplier: Alumasc Exterior Building Products Ltd White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG. United Kingdom Tel: +44 (0)1744 648400 Fax: +44 (0)1744 648401 E-mail: waterproofing@alumasc-exteriors.co.uk Manufacturer: IMPERBEL SA, Bergensesteenweg 32, B-1651 LOT - BRUSSELS - BELGIUM Tel : +32 2 334 87 00 Fax : +32 2 378 14 69 Email: infoint@derbigum.com
1.4
Telephone number in case of emergency: 0032 2 334 87 00 (Mon – Fri – 09.00 – 17.00 local time)
2. Hazards identification 2.1
Dangers to Human Health Ingestion: Absorption through skin: Inhalation: Contact with skin: Contact with eyes:
No known risk. No known risk Gases may form at high temperatures which irritate the respiratory tract When used at high temperatures, the material may cause serious burns When used at high temperatures, the material may cause serious burns
3. Composition and information about the components 3.1 3.2 3.3 3.4
Oxidised bitumen Atactic polypropylene (APP) Filler (CaCO3) Non woven polyester
Components present no known risk
4. First-aid measures 4.1
Contact with skin: If molten product splashes on to the skin, immediately immerse the affected area into cold water to cool and solidify the product for at least 15 min.
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Fax: +44 (0)1744 648401
Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk
Material Safety Data Sheet Hi-Ten Universal
Sheet No: M006FR Revision: 1 Pages:
Issued: st
1 Issue:
24/04/12 16/06/05
2 of 5
4.2
Do not attempt to remove the solidified product. The product can be softened by means of a liquid mix of medical paraffin. After first aid, consult a doctor.
4.3
Contact with eyes: If molten product splashes into the eyes, rinse copiously with cold water to dissipate the heat for at least 15 min. and immediately consult a doctor.
4.4
In case of respiratory difficulties due to excessive inhalation of the fumes Take the affected person to the open air. If the problem persists, consult a doctor
5. Fire-fighting measures 5.1
Extinguishing means: Powder, or CO2, or foam extinguishers
5.2
Extinguishing means to avoid: Do not use Water.
6. Accidental release measures 6.1
Measures in case of accidental release None
7. Handling and storage 7.1
Storage temperature Room temperature
7.2
Packaging Rolls on pallets
7.3
Special precaution for storage and handling Leave the rolls in their original packaging when handling.
8. Exposure controls/personal protection 8.1
Exposure None
8.2
Individual protection Wear appropriate clothing (safety shoes, gloves) during handling
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Fax: +44 (0)1744 648401
Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk
Material Safety Data Sheet Hi-Ten Universal
Sheet No: M006FR Revision: 1 Pages:
Issued: st
1 Issue:
24/04/12 16/06/05
3 of 5
9. Physical and chemical properties 9.1
General information Solid bituminous membrane. No significant odour. Black in colour.
9.2
Important health, safety and environmental information Physical state at 20째C pH Value Melting Point Boiling Point Flash Point Self ignition Auto-ignition temperature Decomposition point Vapour tension Relative density @ 20째 Solubility
: : : : : : : : : : :
Solid Neutral 150o None 300o Non flammable product 350o none none 1.05 Insoluble
10. Stability and reactivity 10.1
When used according to the technical data sheet and standard good practice, there is no risk of decomposition. In case of contact with organic or inorganic solvents, there is a risk of attack or dissolution of the product.
11. Toxicological information 11.1
The components of the product present no known risk
12. Ecological information 12.1
The product is insoluble in water and non biodegradable
13. Disposal considerations 13.1
There is no specific recommendation. Disposal can take place according to the local rulings for non toxic wastes
14. Transport information
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Fax: +44 (0)1744 648401
Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk
Material Safety Data Sheet Hi-Ten Universal RID/ADR IMDG by sea None None
OACI by air None
The product is classified as non dangerous within the transport regulations
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Fax: +44 (0)1744 648401
Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk
Sheet No: M006FR Revision: 1 Pages:
4 of 5
Issued: st
1 Issue:
24/04/12 16/06/05
Material Safety Data Sheet Hi-Ten Universal
15. Regulatory information 15.1
Labelling according to EC prescriptions.
15.2
Labelling/symbols: none
16. Other information 16.1
Consult the technical data sheet.
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Fax: +44 (0)1744 648401
Email: waterproofing@alumasc-exteriors.co.uk www.alumascwaterproofing.co.uk
Sheet No: M006FR Revision: 1 Pages:
5 of 5
Issued: st
1 Issue:
24/04/12 16/06/05