Engineered Drainage Harmer LCC
7/11/02
10:45 am
Page 1
Engineered Drainage Systems
Uniclass
G5811
CI/SfB (52.3) October 2002
Harmer Socketed Soil and Waste Systems
Harmer LCC
Engineered Drainage Harmer LCC
7/11/02
10:45 am
Page 2
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Contents
Contents page
Introduction to Harmer LCC
3
Pipe Dimensions and Weights
4
Harmer LCC Pipes and Fittings â–
Pipes and Fittings
Imperial Conversion Table
2
Alumasc Technical Helpline 01744 648400
6
19
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 3
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Introduction
Harmer LCC Socketed Soil and Waste Systems Introduction Harmer LCC is a traditional socketed cast iron pipe and fittings system manufactured to original imperial dimensions. It has been created specifically for use in building refurbishment and historic building contracts where there is a need to faithfully reproduce period detail. Alumasc has taken the original processes for the casting of iron, and combined them with modern manufacturing techniques to produce a product fully attuned to today’s refurbishment requirements.
Features Harmer LCC incorporates all the inherent characteristics of cast iron, plus dimensional accuracy and a consistent standard of finish for the final site installation. An extensive range of fittings and accessories provides great flexibility in installation, while special detailing requirements can be catered for through Alumasc’s fabrication and pattern making workshops. Alumasc has also perfected the welding of cast iron, so that fittings or offsets to suit a particular situation can be specially fabricated where the alternative of making a pattern would not be economic.
Key Benefits ■ Ideal for itemised replacement of existing LCC systems
General Description
Imperial Dimensions
Harmer LCC soil and waste pipes and fittings are factory-dipped in bitumen in accordance with BS 416. Where gloss painting is required, it is advisable to contact Alumasc Technical Services on 01744 648400.
All products are made to the original imperial dimensions. This ensures a compatible interchange between old and new pipes and fittings and makes it more likely that, where an existing installation is being repaired or replaced, the original fixing holes can be re-used.
Standards
Pipe Fixing and Support
Harmer LCC waste pipes and fittings comply with the requirements of BS 416: Discharge, ventilating pipes and fittings, sand cast or spun in cast iron, Part 1, 1990. Harmer LCC systems also comply with the relevant sections of the Building Regulations throughout the United Kingdom.
Holderbats for plugging and screwing to walls are available. Bobbins should be used to pack out the holderbat to give a 32mm painting gap for pipes up to 75mm (3") diameter, and 38mm for the 88mm (3 1/2") and 100mm (4”) diameter pipes. For fixing centres reference should be made to BS 8000: Maximum distance between sanitary pipe supports, Table 1.
Finishes
Installation BS 8000: Workmanship on building sites, Part 13, Code of practice for above ground drainage and sanitary appliances, 1989 is applicable.
Suitability Cast iron should not be used for conveying acid wastes or laid unprotected in any soil conditions where corrosion could occur.
On-site Storage To avoid accidental damage to collars or pipe ends, pipes should be stored horizontally, blocked up clear of the ground and preferably under cover.
Pipe Joints Pipe joints should be made using a caulking of 6mm diameter yarn, now available only in glass fibre instead of the traditional tarred yarn, with a minimum 38mm thickness of lead wool, well compacted.
Testing The Building Regulations 1991, Requirement H1, Approved Document paragraph 1.7(a) requires that all the pipes, fittings and joints should be capable of withstanding an air or smoke test of at least 38mm gauge, for 3 minutes.
■ Manufactured to original imperial dimensions ■ Supplied ready painted ■ Comprehensive range of fittings ■ Unique specials manufacture and fabrication
Alumasc Technical Helpline 01744 648400
3
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 4
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Pipe Dimensions and Weights
Pipes f Manufacturing dimensions
e b a
v h d
g k
j u c
100mm Dia Pipe a Internal diameter 100 b External diameter 114 c Thickness 6 d Diameter over spigot bead 104 Socket e Internal diameter 127 f External diameter 136 g Thickness 6 h Internal depth 76 j External diameter over socket beads 133 k Caulking clearance 6 Ears u Length of flange overall 212 v Centre to centre of holes 180
88mm Dia
76mm Dia
63mm Dia
50mm Dia
85 100 6 111
76 88 6 98
60 76 6 85
50 63 6 69
114 130 6 76 146 6
100 117 6 69 139 3
88 104 6 69 114 3
73 88 6 63 100 3
193 161
177 146
161 130
146 114
63mm Dia
50mm Dia
1830 1730 14.0 kg 14.5 kg
1830 1737 11.5 kg 12.0 kg
1219 1130 9.5 kg 10 kg
1219 1137 8 kg 8.5 kg
914 730 7 kg 7.5 kg
914 737 5.7 kg 6.2 kg
610 530 4.7 kg 5.2 kg
610 537 4 kg 4.5 kg
1830 1663 15.3 kg 15.8 kg
1830 1669 12.5 kg 13 kg
Pipe lengths and weights
Single socket
100mm Dia 88mm Dia 76mm Dia 1830 (6ft) pipe Length of pipe overall 1830 1830 1830 Effective length of pipe 1725 1725 1730 Weight of 6' pipe without ears 21.7 kg 19.0 kg 16.7 kg Weight of 6' pipe with ears 22.2 kg 19.5 kg 17.2 kg 1219 (4ft) pipe Length of pipe overall 1219 1219 1219 Effective length of pipe 1125 1125 1130 Weight of 4' pipe without ears 14.5 kg 12.7 kg 11.2 kg Weight of 4' pipe with ears 14.8 kg 13 kg 11.5 kg 914 (3ft) pipe Length of pipe overall 914 914 914 Effective length of pipe 725 725 730 Weight of 3' pipe without ears 10.8 kg 9.5 kg 8.3 kg Weight of 3' pipe with ears 11.3 kg 10 kg 8.8 kg 610 (2ft) pipe Length of pipe overall 610 610 610 Effective length of pipe 525 525 530 Weight of 2' pipe without ears 7.3 kg 6.3 kg 5.5 kg Weight of 2' pipe with ears 7.8 kg 6.8 kg 6 kg Double socket pipe, in 1830 (6ft) overall pipe lengths only 6 ft Double collar – Length of pipe overall 1830 1830 1830 – Effective length of pipe 1650 1650 1663 – Weight without ears 23.7 kg 20.5 kg 18.2 kg – Weight with ears 24.2 kg 21 kg 18.7 kg
Double socket (1830mm pipe length only)
4
Alumasc Technical Helpline 01744 648400
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 5
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Pipes & Fittings
Harmer LCC Pipes & Fittings
Alumasc Technical Helpline 01744 648400
5
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 6
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Pipes and Fittings
Fittings Harmer LCC soil and waste systems comprise a range of pipes available with or without ears, and in five sizes (50, 63, 75, 87 and 100mm diameter), together with a comprehensive range of fittings and fixings.
L3
T 6F
T
5/
4F L3
L3
5/
3F 5/
5/ L3
0/
T
T 2F
T 6F
T
T
4F
L3
L3
L3
L3
0/
0/
3F
T 2F
T
0/
6F
T L2
5/ L2
5/ L2
5/
4F
T 3F
2F
T
L2
0/ L2
L2
5/
6F
T 4F
T
0/
3F
T
0/
2F
L2
0/ L2
Code Ref
T
Pipes with Ears
Pipe Dia mm
50
50
50
50
63
63
63
63
75
75
75
75
87
87
87
87
Pipe Length
610
914
1219
1830
610
914
1219
1830
610
914
1219
1830
610
914
1219
1830
6F
T L4
0/ L4
0/ L4
1. Pipes without Ears If pipes without ears are required, add suffix NE to the order code.
0/
4F
T 3F
T 2F 0/ L4
Code Ref
T
Notes
Pipe Dia mm
100
100
100
100
Pipe Length
610
914
1219
1830
2. Double Collared Pipes If double collared pipes are required with ears, add suffix DCE to the order code. Add suffix DC if no ears required. Only available in 6ft lengths. 3. Pipe nails are available to order. 4. When specifying loose couplings, slip couplings and access pipes with ears, quote the full product code suffixed with /E.
Built-in Holderbats
50
88
100
Note: Cast iron bobbins are available spacing from 13mm to 50mm in 6mm increments.
Note All dimensions are given in millimetres. An imperial to metric conversion table is given on page 19.
6
Alumasc Technical Helpline 01744 648400
50
63
75
T
T
HB L4
0/
5/ L3 88
Note: Cast iron bobbins are available spacing from 13mm to 50mm in 6mm increments.
/S
/S
T
HB
/S
T
HB 0/ L3
L2
0/ L2
Code Ref For Pipe Size
5/
HB
HB
/S
/S
T
I /B HB
0/ L4
L3
L3 75
/B
I
HB 5/
HB 0/
HB 5/ L2
63
/B
I /B
I /B HB 0/ L2
Code Ref For Pipe Size
I
Screw To Wall Cast Iron Holderbats
100
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 7
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Loose Couplings SO C L3 0/ SO C L3 5/ SO C L4 0/ SO C
C SO
5/
b
L2
0/ L2
Code Ref
b
a
Pipe Dia mm
50
63
75
87
100
a
45
45
38
38
35
b
95
95
90
86
80
SO C/ S L3 0/ SO C/ S L3 5/ SO C/ S L4 0/ SO C/ S
a
L2
0/ L2
Code Ref
5/
SO
C/
S
Slip Couplings
Pipe Dia mm
50
63
75
87
100
a
95
95
89
95
79
Blank End BE L4 0/ BE
a
5/
BE
L3
0/ L3
Code Ref Pipe Dia mm
75
87
100
a
76
76
70
SR /2 0 L4 0/ SR /3 0
a
L4
0/ L3
Code Ref
0/
SR
/2
0
Socket Reducer
Pipe Dia mm
75
100
100
a
51
76
51
b
76
76
70
L4 0/ AP
AP L3 0/ AP L3 5/ AP
L2
0/ L2
Code Ref
5/
AP
Access Pipes
Pipe Dia mm
50
63
75
87
a
63
69
69
76
76
b
234
254
266
273
285
c
63
76
88
95
100
a
100 c
b
Note When specifying fittings with ears, quote the full product code suffixed with /E.
Alumasc Technical Helpline 01744 648400
7
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 8
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Fittings
a
L2
0/ L2
Code Ref
5/
B/
92
B/ 92 L3 0/ B/ 92 L3 5/ B/ 92 L4 0/ B/ 92
92.5째 Bends
Pipe Dia mm
50
63
75
87
100
a
152
165
174
187
193
b
139
155
161
177
180
c
88
95
104
111
117
c
b
AR 92
92
AL
AR
L4
0/
B/
B/ L4
0/
B/
92
L3
L3
5/
5/
B/
92 B/ 0/
L3
92
AL
AR
AL 92
AR
0/ L3
5/
B/
92
AL
B/
92 B/
L2
5/ L2
L2
0/ L2
Code Ref
0/
B/
B/
92
92
AL
AR
92.5째 Bends with left hand/right hand side access
Pipe Dia mm
50
50
63
63
75
75
87
87
100
100
a
152
152
165
165
174
174
187
187
193
193
b
139
139
155
155
161
161
177
177
180
180
c
88
88
95
95
104
104
111
111
117
117
d
63
63
76
76
88
88
95
95
100
100
a c
d b
B/ 0/
L4
L3
L3
92
H B/
5/
B/ 0/
B/ 5/ L2
92
H 92
H 92
H 92 B/ 0/ L2
Code Ref
H
92.5째 Bends with heel access
Pipe Dia mm
50
63
75
87
100
a
152
165
174
187
193
b
139
155
161
177
180
c
88
95
104
111
117
d
63
76
88
95
100
Note If bends with ears are required, add LE to the order code for left hand side and RE for right hand side bend.
8
Alumasc Technical Helpline 01744 648400
a c
d b
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 9
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
R
BL
a
L4
5/
0/
BL
R BL
L3
0/ L3
Code Ref
R
92.5째 Long Radius Bends
Pipe Dia mm
75
87
100
a
279
292
298
b
292
298
304
c
209
215
222
c
b
2
0/ L4
L3
L3
11 B/
B/ 5/
B/ 0/
B/ 5/ L2
11
2 11
2 11
2 11 B/ 0/ L2
Code Ref
2
112.5째 Bends
Pipe Dia mm
50
63
75
87
100
a
152
165
174
184
193
b
139
155
161
177
180
c
88
95
104
111
120
a c
b
2H 11
0/ L4
L3
L3
B/
B/ 5/
B/ 0/
B/ 5/ L2
11
2H 11
2H 11
2H 11 B/ 0/ L2
Code Ref
2H
112.5째 Bends with heel access
Pipe Dia mm
50
63
75
87
100
a
152
165
174
184
193
b
139
155
161
177
180
c
88
95
104
111
120
d
63
66
73
95
100
a c
d b
Alumasc Technical Helpline 01744 648400
9
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 10
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Fittings
5 B/
B/
a
0/
5/
L4
L3
0/ L3
13
13
5 13
5
B/
13
5
B/
13
5/
B/
L2
0/ L2
Code Ref
5
135째 Bends
Pipe Dia mm
50
63
75
87
100
a
127
136
142
171
177
b
142
158
161
161
165
c
88
95
104
111
120
c
b
5H 13
0/
c
Pipe Dia mm
50
63
75
87
100
a
127
136
142
171
177
b
142
158
161
161
165
c
88
95
104
111
120
d
63
66
73
95
100
20
25
20
L4
L3
L3
a
B/
B/ 5/
B/ 0/
B/ 5/ L2
13
5H 13
5H 13
5H 13 B/ 0/ L2
Code Ref
5H
135째 Bends with heel access
d
b
35 DI
0/ L4
0/ L4
a
M/
30 M/
25
DI
M/
20
DI 0/ L4
L4
5/
0/
DI
DI
M/
M/
30
25 M/
5/
L3
L3
L3
5/
DI
M/ DI
M/ DI 0/
L3
L3
5/ L2
Code Ref
0/
DI
DI
M/
M/
20
Diminishing Pieces
Pipe Dia mm
63
75
75
87
87
87
100
100
100
a
69
69
69
76
76
76
76
76
76
100 76
b
304
304
304
304
304
304
304
304
304
304
c
50
50
63
50
63
75
50
63
75
87
b
c
Note If bends with ears are required, add LE to the order code for left hand side and RE for right hand side bend.
10
Alumasc Technical Helpline 01744 648400
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 11
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
/2
/2 L2
5/
OF
OF 5/ L2
50
50
50
50
50
50
50
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
69
69
69
69
69
69
69
69
69
b
241
257
273
304
336
361
400
431
463
257
273
288
320
352
384
415
447
479
Offset
75
112
150
237
300
375
475
554
600
75
112
150
237
300
375
475
554
600
75
75
75
75
75
75
75
87
87
87
87
87
87
87
87
69
69
69
69
69
69
69
69
76
76
76
76
76
76
76
76
76
b
266
282
298
330
361
393
425
457
488
282
298
314
346
377
409
441
473
504
Offset
75
112
150
237
300
375
475
554
600
75
112
150
237
300
375
475
554
600
/2
OF 0/
OF L4
L4
0/
OF
87
/2
1 /2
8 /1
5 /1 L4
L4
0/
0/
OF
OF
/1
9 /0
L4
L4
OF 0/
OF 0/
OF
L4
0/ L4
0/
6 /0
4 /0
3 /0 OF 0/ L4
OF
L3
5/
5/ L3
L3
75
69
4
75
a
2
Pipe Dia mm
Code Ref
4
1 OF
OF 5/
OF
/2
/1
5 /1
2 /1
L3
L3
5/
5/
OF
OF
/0
6 /0
L3
L3
OF 5/
OF L3
5/
4 /0
3 5/
OF L3
L3
L3
/0
4 5/
OF 0/
OF 0/
OF
/2
1 /2
8 /1
5
L3
L3
0/
0/
OF
OF
/1
/1
9
L3
L3
0/
OF 0/
OF 0/
OF
L3
0/ L3
/0
6 /0
4 /0
3 /0 OF 0/ L3
63
8
50
63
9
50
a
2
Pipe Dia mm
Code Ref
4
1
8 /1
5
OF 5/ L2
5/ L2
L2
L2
5/
5/
OF
OF
/1
/1
2
9 /0
6
OF
/0
4
OF 5/ L2
5/ L2
5/ L2
L2
/0
3
OF
/0
4
OF
/2
1
OF 0/
OF 0/ L2
L2
L2
0/
0/
OF
OF
/1
/2
8
5 /1
/1
9
0/
L2
0/ L2
L2
OF
/0
6
OF
/0
4 0/
OF
OF
/0
3 /0
0/
OF
L2
0/ L2
Code Ref
2
112.5째 Swan Necks
Pipe Dia mm
100
100
100
100
100
100
100
100
a
76
76
76
76
76
76
76
76
100 76
b
288
307
323
355
387
419
450
482
514
Offset
75
112
150
237
300
375
475
554
600
a
b
offset
Note If swan necks with ears are required, add LE to the order code for left hand side and RE for right hand side bend.
Alumasc Technical Helpline 01744 648400
11
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 12
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Fittings
50
63
/9 0/
L4
L3
75
a
BR
BR
/9
5/
BR
/9 L3
L2
0/
5/
0/
BR
/9 BR Pipe Dia mm
L2
Code Ref
/9
92.5째 Equal Single Branches
87
b
100
a
63
69
69
76
76
b
234
260
285
304
330
c
177
196
212
225
241
d
88
95
111
117
130
c
a
d
75
9
a
A/ BR
BR
0/
5/
L4
L3
L3
63
A/
9 BR
0/
BR 5/ L2
50
A/
9 A/
9 A/ BR 0/ L2
Code Ref Pipe Dia mm
9
92.5째 Equal Single Branches with access
87
b
100
a
63
69
69
76
76
b
234
260
285
304
330
c
177
196
212
225
241
d
88
95
111
117
130
e
146
161
177
190
206
c
e
a
d
63
1 BR
BR
87
L4
0/
5/ L3
L3 75
a
/1
/1
1 BR
0/
BR 5/ L2
0/ 50
/1
1 /1
1 /1 BR Pipe Dia mm
L2
Code Ref
1
112.5째 Equal Single Branches
b
100
a
63
69
69
76
76
b
234
260
285
304
330
c
155
174
184
120
184
d
79
85
100
107
146
c a
d
Note When specifying fittings with ears, quote the full product code suffixed with /E.
12
Alumasc Technical Helpline 01744 648400
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 13
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
63
11 BR
0/
5/
L4
L3
75
a
A/
A/
11
BR
A/
11 0/ L3
5/ L2
0/ 50
BR
A/
11
BR
A/ BR Pipe Dia mm
L2
Code Ref
11
112.5째 Equal Single Branches with Access
87
b
100
a
63
69
69
76
76
b
234
260
285
304
330
c
155
174
184
120
184
d
79
85
100
107
146
e
146
161
177
190
206
c
e
a
d
75
3
a
/1 BR
BR
0/ L4
L3
L3
63
/1
3 5/
BR 0/
BR 5/ L2
50
/1
3 /1
3 /1 BR 0/ L2
Code Ref Pipe Dia mm
3
135째 Equal Single Branches
87
b
100
a
63
69
69
76
76
b
234
260
285
304
330
c
120
130
133
146
146
d
114
130
152
158
184
a c d
13 A/
0/
b
L4
L3
L3
a
BR
BR 5/
BR 0/
BR 5/ L2
A/
13 A/
13 A/
13 A/ BR 0/ L2
Code Ref
13
135째 Equal Single Branches with Access
Pipe Dia mm
50
63
75
87
a
63
69
69
76
100 76
b
234
260
285
304
330
c
120
130
133
146
146
d
114
130
152
158
184
e
146
161
177
190
206
a c
f d
Alumasc Technical Helpline 01744 648400
13
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 14
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Fittings
L4
L4
0/
0/
BR
U/
98
97 U/
96
BR
U/
95 0/ L4
L3
L4
5/
0/
BR
BR
BR
U/
97 U/
U/
95
5/ L3
5/ L3
0/ L3
BR
U/
96
BR
U/
95
BR
U/
95
BR
U/
0/
BR
L3
5/ L2
Code Ref
96
92.5째 Unequal Single Branches
Pipe Dia mm
63
75
75
87
87
87
100
100
100
a
69
69
69
76
76
76
76
76
76
100 76
b
260
260
273
266
285
292
279
285
292
304
c
196
196
206
206
209
215
219
209
215
209
d
95
100
104
107
111
117
114
117
123
123
e
63
63
69
63
69
69
63
69
69
76
f
50
50
63
50
63
75
50
63
75
88 a f
b
c e
d
8
7
/9 UA
L4
0/
BR
BR
UA
/9
6 /9 UA
L4
0/
0/
BR
UA BR
L4
0/ L4
5/ L3
5 /9
7 /9 UA
BR
BR
UA
/9
5 UA
L3
5/ L3
L3
5/
BR
UA BR
UA
0/
BR 0/ L3
/9
6 /9
5 /9
5 /9 UA BR 5/ L2
Code Ref
6
92.5째 Unequal Single Branches with Access
Pipe Dia mm
63
75
75
87
87
87
100
100
100
a
69
69
69
76
76
76
76
76
76
100 76
b
260
260
273
266
285
292
279
285
292
304
c
196
196
206
206
209
215
219
209
215
209
d
95
100
104
107
111
117
114
117
123
123
e
63
63
69
63
69
69
63
69
69
76
f
50
50
63
50
63
75
50
63
75
88
g
165
165
170
165
176
187
177
180
182
178
a f
b
c
g
e
d
Note When specifying fittings with ears, quote the full product code suffixed with /E.
14
Alumasc Technical Helpline 01744 648400
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 15
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
8
BR 0/
b
L4
Pipe Dia mm
63
75
75
87
87
100
100
a
69
69
69
76
76
76
76
76
b
276
260
276
263
288
279
288
304
c
187
174
187
180
184
190
184
193
d
104
92
104
98
111
104
114
111
e
63
63
69
63
69
63
69
76
f
50
50
63
50
76
50
76
88
f
U/
U/ BR 0/
L4
L3
a
11
11
11
7
5
7
U/ 5/
5/ L3
L3
BR
BR
U/ BR 5/
U/
11
11
5
6 11 U/
BR L3
L3
0/
0/
5/ L2
Code Ref
BR
BR
U/
U/
11
11
5
5
112.5째 Unequal Single Branches
100 c
e
d
18
a
f
/1
17
UA
/1
b
0/
BR
BR
UA
/1 UA L4
L4
0/
BR 5/ L3
L3
L3
15
17
UA
BR
UA
5/
BR
/1
15 /1
16 /1 UA
5/
BR 0/ L3
L3
L2
Code Ref
0/
5/
BR
BR
UA
UA
/1
/1
15
15
112.5째 Unequal Single Branches with Access
Pipe Dia mm
63
75
75
87
87
100
100
a
69
69
69
76
76
76
76
100 76
b
276
260
276
263
288
279
288
304
c
187
174
187
180
184
190
184
193
d
104
92
104
98
111
104
114
111
e
63
63
69
63
69
63
69
76
f
50
50
63
50
75
50
75
88
g
165
165
165
165
184
174
180
177
c
e
g
d
8 U/
13
13
7
f
a b
BR
U/
13
0/ L4
L4
L3
5/
0/
BR
BR
U/
U/
5/ L3
5
7 13
5 U/
5/ L3
0/ L3
BR
13
6 13
BR
U/ BR
U/
L3
0/
5/ L2
Code Ref
BR
BR
U/
13
13
5
5
135째 Unequal Single Branches
Pipe Dia mm
63
75
75
87
87
100
100
100
a
69
69
69
76
76
76
76
76
b
260
260
280
266
292
279
292
304
c
130
130
130
133
133
139
127
127
d
133
133
133
146
161
152
171
177
e
63
63
69
63
69
63
69
76
f
50
50
63
50
75
50
75
88
e
c
d
Alumasc Technical Helpline 01744 648400
15
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 16
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Fittings
38 /1
37
UA
b
0/ L4
0/ L4
5/ L3
f
a
BR
UA
/1
BR
UA BR
BR
5/
/1
35
37 /1
35
L3
L3
5/
UA
/1
36
UA
/1
BR
UA BR 0/
L3
L3
0/
5/ L2
Code Ref
BR
BR
UA
UA
/1
/1
35
35
135째 Unequal Single Branches with Access
Pipe Dia mm
63
75
75
87
87
100
100
100
a
69
69
69
76
76
76
76
76
b
260
260
280
266
292
279
292
304
c
130
130
130
133
133
139
127
127
d
133
133
133
146
161
152
171
177
e
63
63
69
63
69
63
69
76
f
50
50
63
50
75
50
75
88
g
165
165
165
165
184
174
180
177
e
c f d
9
L4
L3
0/
5/
BR
BR
a
D/
D/
9 D/
9
L2
L3
5/
0/
BR
BR
D/
9 D/ BR 0/ L2
Code Ref
9
92.5째 Equal Double Branches
Pipe Dia mm
50
63
75
87
100
a
63
69
69
76
76
b
234
260
285
304
330
c
177
196
212
225
241
d
88
95
111
117
130
b c a d
9A D/
0/ L4
L3
L3
Pipe Dia mm
50
63
75
87
100
a
63
69
69
76
76
b
234
260
285
304
330
c
177
196
212
225
241
d
88
95
111
117
130
e
146
161
177
190
209
Note When specifying fittings with ears, quote the full product code suffixed with /E.
16
a
BR
BR 5/
BR 0/
BR 5/ L2
D/
9A D/
9A D/
9A D/ BR 0/ L2
Code Ref
9A
92.5째 Equal Double Branches with Access
Alumasc Technical Helpline 01744 648400
b c a d
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 17
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
11
BR 0/
5/
L4
L3
0/ L3
5/
a
D/
D/
11
BR
D/
11
BR
D/
11
BR
D/ BR
L2
0/ L2
Code Ref
11
112.5째 Equal Double Branches
Pipe Dia mm
50
63
75
87
100
a
63
69
69
76
76
b
234
260
285
304
330
c
155
174
184
193
209
d
79
85
98
111
120
b a
c e d
A 11
BR 0/
b
L4
L3
L3
a
D/
D/ BR
D/
5/
BR
D/
0/
BR 5/ L2
11
A 11
A 11
A 11 D/ BR 0/ L2
Code Ref
A
112.5째 Equal Double Branches with Access
Pipe Dia mm
50
63
75
87
100
a
63
69
69
76
76
b
234
260
285
304
330
c
155
174
184
193
209
c
a e d
d
79
85
98
111
120
e
146
161
177
190
209
50
63
D/ BR
0/ L4
L3 87
a
13
13 BR
5/
BR L3
75
D/
13 D/
13 D/
0/
BR 5/ L2
L2
Code Ref Pipe Dia mm
0/
BR
D/
13
135째 Equal Double Branches
100
a
63
69
69
76
76
b
234
260
285
304
330
c
120
130
136
146
146
d
114
130
149
158
184
b
a c
d
Alumasc Technical Helpline 01744 648400
17
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 18
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Fittings
Fittings
50
A D/
BR 0/
b
L4
L3
75
a
13
13
A BR 5/
BR 0/ L3
5/ 63
D/
13
A
D/
13
A
D/
13
BR
D/ BR
L2
0/ L2
Code Ref Pipe Dia mm
A
135째 Equal Double Branches with Access
87
100
a
63
69
69
76
76
b
234
260
285
304
330
c
120
130
136
146
146
d
114
130
149
158
184
e
146
161
177
190
209
d
a
Bossed Pipes 00 /2 BP
BP
L4
0/
0/ L4
L4
/1
/1
50
25
00 0/
5/ L3
L3
BP
BP
/1 BP 5/
/2
50
25 /1 BP
L3
L3
5/
0/
0/
BP
BP
/1
/1
50
25
c
L3
Code Ref Pipe Dia mm
75
75
83
83
83
100
100
100
a
76
76
76
76
76
76
76
76
b
381
381
381
381
381
381
381
381
c
139
139
139
139
139
139
139
139
b
SH
a
0/ L4
L3
L3
L2
5/
SH 0/
SH 5/
SH 0/ L2
SH
Shoes
Code Ref Pipe Dia mm
50
63
75
87
100
a
63
69
69
76
76
b
127
149
177
200
228
b
P Traps
18
L4
0/
PT
c
Code Ref Pipe Dia mm
100
a
76
b
136
c
343
a c
Alumasc Technical Helpline 01744 648400
a b
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 19
Engineered Drainage Systems Socketed Soil and Waste Systems Harmer LCC Imperial Conversion Table
Imperial Conversion Table in
mm
1 /8
3.2 6.4 9.5 12.7 15.9 19.1 22.2
1 /4 3 /8 1 /2 5 /8 3 /4 7 /8
1
25.4
11 /8 11 /4 13 /8 11 /2 15 /8 13 /4 17 /8
28.6 31.8 34.9 38.1 41.3 44.5 47.6
2
50.8
21 /8 21 /4 23 /8 21 /2 25 /8 23 /4 27 /8
54.0 57.2 60.3 63.5 66.7 69.9 73.0
3
76.2
31 /8 31 /4 33 /8 31 /2 35 /8 33 /4 37 /8
79.4 82.6 85.7 88.9 92.1 95.3 98.4
4 41 /8 41 /4 43 /8 41 /2 45 /8 43 /4 47 /8
5 51 /8 51 /4 53 /8 51 /2 55 /8 53 /4 57 /8
in 6 61 /8 61 /4 63 /8 61 /2 65 /8 63 /4 67 /8
7 71 /8 71 /4 73 /8 71 /2 75 /8 73 /4 77 /8
8 81 /8 81 /4 83 /8 81 /2 85 /8 83 /4 87 /8
9
mm 152.4 155.6 158.8 161.9 165.1 168.3 171.5 174.6
177.8 181.0 184.2 187.3 190.5 193.7 196.9 200.0
203.2 206.4 209.6 212.7 215.9 219.1 222.3 225.4
228.6
91 /8 91 /4 93 /8 91 /2 95 /8 93 /4 97 /8
231.8 235.0 238.1 241.3 244.5 247.7 250.8
10
254.0
in 12
ft 1
in 0
mm 304.8
121/8 121/4 123/8 121/2 125/8 123/4 127/8
1 1 1 1 1 1 1
0 1 /8 0 1 /4 0 3 /8 0 1 /2 0 5 /8 0 3 /4 0 7 /8
308.0 311.2 314.3 317.5 320.7 323.9 327.0
13
1
1
330.2
131/8 131/4 133/8 131/2 135/8 133/4 137/8
1 1 1 1 1 1 1
1 1 /8 1 1 /4 1 3 /8 1 1 /2 1 5 /8 1 3 /4 1 7 /8
333.4 336.6 339.7 342.9 346.1 349.3 352.4
14
1
2
355.6
141/8 141/4 143/8 141/2 145/8 143/4 147/8
1 1 1 1 1 1 1
2 1 /8 2 1 /4 2 3 /8 2 1 /2 2 5 /8 2 3 /4 2 7 /8
358.8 362.0 365.1 368.3 371.5 374.7 377.8
15
1
3
381.0
151/8 151/4 153/8 151/2 155/8 153/4 157/8
1 1 1 1 1 1 1
3 1 /8 3 1 /4 3 3 /8 3 1 /2 3 5 /8 3 3 /4 3 7 /8
384.2 387.4 390.5 393.7 396.9 400.1 403.2
15
1
3
381.0
101.6 104.8 108.0 111.1 114.3 117.5 120.7 123.8
101/8 101/4 103/8 101/2 105/8 103/4 107/8
257.2 260.4 263.5 266.7 269.9 273.1 276.2
127.0 130.2 133.4 136.5 139.7 142.9 146.1 149.2
11 111/8 111/4 113/8 111/2 115/8 113/4 117/8
279.4 282.6 285.8 288.9 292.1 295.3 298.5 301.6
Alumasc Technical Helpline 01744 648400
19
Engineered Drainage Harmer LCC
7/11/02
10:46 am
Page 20
Alumasc is now firmly established as one of the leading manufacturers of premium building and construction products. A unique heritage combined with vast experience and craftsmanship derived from all corners of the industry, gives the platform to provide specifiers with one of the most diverse product portfolios available on the market. Highly regarded throughout the UK and Europe, a number of Alumasc brands are now established as world leaders in their field.
Alumasc has a firm commitment to customer service and operational excellence. This together with the company’s combined experience ensures that Alumasc understands individual needs, providing a first class service from initial design through to completion and beyond.
Architectural Rainwater Systems
Head Office Alumasc Exterior Building Products Ltd
Engineered Drainage Systems
White House Works, Bold Road, Sutton, St Helens, Merseyside WA9 4JG
Flat Roofing & Waterproofing Systems
Tel: +44 (0)1744 648400 Fax: +44 (0)1744 648401
Metal Roofing Systems Email: info@alumasc-exteriors.co.uk Façade Systems
All reasonable care has been taken in the preparation of this manual, all information, recommendations and guidance notes on the use of The Products are made without guarantee since the conditions of use are beyond the control of Alumasc Exterior Building Products Limited (The Company). The customer is responsible for ensuring that each product is fit for its intended purpose and that conditions for use are suitable. The information contained in this brochure and advice arising therefrom is free of charge and accordingly on the terms that no liability nor liability for negligence will attach to The Company or its servants in relation to any such service arising out of or in connection with this brochure. The Company pursues a policy of constant product development and information contained in this publication is therefore subject to change without notice.
1002/3.1K
www.alumasc-exteriors.co.uk