Accessories by Värmekabelteknik

VärmeKabelTeknik

Accessories

From

Accessories 2

VärmeKabelTeknik

Cable attachments Technical data

Material: See below. Length: ........................................... galvanized 25 m/reel ....................................................................... Plastic 1 m ............................................ Remaining in running metre Width ...................................................... metallic 20 mm .................................................................. plastic 10 mm Part.no ............... 89 992 34 ‐ Cable attachments, plastic ..................... 89 992 35 ‐ Cable attachments, galvanized ............................... 89 992 34SS ‐Cable attachments, SS ................. 89 992 34AL ‐ Cable attachments, aluminium ...................... 89 992 34CU ‐Cable attachments, Copper

Application example

Fixes the heating cable in floor, roof, box gutter and cistern installations, to name a few. The cable attachments are available with different c/c‐ distances, special ordering, for easy mounting. The distance between two cable retaining lips is 110mm. Other distances available on request.

Application example

VärmeKabelTeknik

Accessories 3

Installation mesh‐wire net Technical data

Material: ................................................ Galvanized wire Length: .............................................. per 5, 10, 25 m reel Width: ....................................................... 600/1000 mm Wire mesh: ......................................................... Ø 2 mm Part.no: .......................................... 89 992 34 N (600x25)

Range of application

For laying heating cable in timber joists. Using the meshes of the net, the cable is secured at intervals of about 250‐300mm.

Application example

Accessories 4

VärmeKabelTeknik

Distance clip Technical data

Material: ............................................................... Plastic Length: ..................................................................45 mm Width: ...................................................................12 mm Part.no: ............................................................ 89 992 41 ............................................. Distance clip Velox á 50 pcs

Range of application Mounted as spacers on TCPR cables installed in gutters and downpipes.

Application example

VärmeKabelTeknik

Accessories 5

Heating cable mounting clip Technical data

Material: ................................................... Stainless steel Part.no: .................. 89 992 42A Mounting clip SAFE‐T 4" ..................................89 992 42 Mounting clip SAFE‐T 5" ............................... 89 992 42B Mounting clip SAFE‐T 6"

Range of application

Prevents damage to the cable at the cable entry point into the downpipe. Also serves as an anchor for a strain relief device in longer downpipes.

Application example

Accessories 6

VärmeKabelTeknik

Plate metal Wooden Joists Technical data

Material: ........................................................ Aluminium Dimension: .................................................... 65 x 30 x 20 Part.no: ............................................................ 89 992 42

Range of application

For installation of heating cables in wooden joists. Are to be installed in sawed out parts at passages in ridges, in order to eliminate direct contact against combustible material.

Application example

VärmeKabelTeknik

Accessories 7

Roof hook Technical data

Material: ................................................... Stainless steel Length: ................................................................ 170 mm Width .................................................................... 40 mm Part.no: .......................... 89 992 40 Roof hook Velox TCP .................................. 89 992 45 Roof hook Velox SAFE‐T

Range of application

Prevents damage to the cable at the cable entry point into the downpipe. Also serves as an anchor for a strain relief device in longer downpipes.

Application example

Accessories 8

VärmeKabelTeknik

Woven aluminum tape 90° Range of application

Installation and fixation of heating cables and heating foils.

Characteristics Provides good dissipation of heat and a substantial increase in power output if applied to self‐limiting heating cable covering it completely. Protects a conventional heating cable against local overheating caused by penetration into insulation material.

Technical data Part.no ........................................................... E89 992 44 Base: ..........Woven glass‐cloth reinforced aluminium foil Adhesive substance: ............................................. Acrylic Thickness .......................................................... 0,105mm

Application example

Colour ............................................... Polished aluminium Adhesion to steel ...................................... 1850gr/25mm Tensile strength ....................................... 10.8 Kp/25mm Diffusion density ............................ below 1g/m² / 24tim Max. stretching ........................................................... 5% Protective backing: ...................... Silicone treated paper Temperature range .......................................... ‐5°C/90°C Should be stored in a dry, dark space with an indoor air humidity of 50% and a temperature of +15°C to 20°C.

VärmeKabelTeknik

Accessories 9

Aluminum tape max 140°C Range of application:

Aluminium tape is used to fix and install electrical heating sources. Aluminiumtape improves heat gransfer from heating source to required object as protection againstinsulation material encloses heating cable mounted on a pipe as an example. Adhesive substance ................................................ Acryl Body ......................................................... Aluminium foil Thickness ............................................................... 90 µm Colour ..................................................................... silver Time of storage ..... approx.12 months at hightest +21°C ..................................................... (50% relativ moisture) Adhesive ability against stainless steel ..... 4.4 N/10mm Tensile strength ........................................... 3.0 N/10mm Elongation before break ........................................ 5.0 % Temperature range ............................. Maximum 150 °C

Accessories 10

VärmeKabelTeknik

Glass cloth tape Range of application

Mounting and fixing of heating cables and heating foils.

Characteristics Provides good lasting fixation of tex. Heat tracing wrapped around pipe, will not shrink, stretch or burn and has a high tensile strength.

Technical data Base: ..................................................... Wove glass‐cloth Adhesive substance .............................................. Acrylic Thickness ............................................................0,17 mm Colour ..................................................................... White Adhesion to steel ............................................ 0.44kg/cm Tensile strength ................................................. 26kg/cm Max. stretching ........................................................... 5% Protective backing.................................................... none Temperaturfe range ................................... ‐30°C / 140°C Part.no: .......................................................... E89 992 51 Should be stored in a dry, dark space with an indoor air humidity of 50% and a temperature of +15°C to 20°C.

VärmeKabelTeknik

Accessories 11

Caution labels/signs Technical data

Caution signs Material: ................................................................ Plastic Length: ................................................................ 145 mm Width .................................................................. 103 mm Part.no ................................................ 89 992 46 Ground ................................................................. 89 992 47 Pipe ................................................................. 89 992 48 Roof Caution tape for pipes

Length: .................................................................. 32 mm Width: ................................................................... 75 mm Part.no: ............................................................ 89 992 49

Range of application

Caution labels should be mounted on a visible location for the application and at the central. For piping marks should be made each 3 meter.

Application example

Accessories 12

VärmeKabelTeknik

Junction Box Abtech Technical data

Junction box and terminal blocks, 6 x 4mm2 + 3 x PE max 16 A. Material: ...................... 30 % glass fabric/70 % polyester Resistance to heat: ........................................ ‐40oC +90oC Protection class: ....................................................... IP 66 Voltage: ........................................................... max 660 V Ex approved: .................................................... EExe II T6 Connection: ..................................... Standard 2 pcs PG16 Part. No.: .......................................................... 89 992 64 NOTE! The plastic material in the box is conductive.

Range of application

Cable entry device for up to 120mm thick insulation. Specially designed to allow convenient connection of one, two or three heating cables of the self‐limiting type, or three constant wattage cables. The mounting bracket is fixed directly to the pipe using a stainless steel strap. The heating cable is laid inside the bracket and so is very well protected against mechanical damage. Between the bracket and the junction box there is a special grommet, designed to take up to three heating cables. The junction box comes equipped with the required number of terminal blocks and has a gland for the incoming power supply cable. When using series resistive heating cable only one loop per mounting bracket is possible.

Application example

VärmeKabelTeknik

Accessories 13

Mounting bracket XPP.EX. Technical data

Mounting bracket:Special cable entry protection for max 3 incoming heating cables Material: ................................................................. Ryton Resistance to heat: ........ +220oC (intermittently + 260oC) Protective class: ....................................................... IP 65 Ex approved: ................................... Eexe No 87102 659X Part. No.: ......................... 89 992 OOU Self‐limiting cable ................................. 89 992 OOV Parallel resistive cable NOTE! When this bracket is used within an Ex area the junction box JB‐K must be used. If mounting brackets are used in connection with other junction boxes the Ex approval is not valid.

Range of application

Application example

Accessories 14

VärmeKabelTeknik

Steel band "clamp kit" Technical data

Material: ................................................... Stainless steel Length: ..................................................... Running metre Width: ...................................................................12 mm Part.no: ...................................... 89 992 38 Fastener PCF ................................................ 89 992 39 Steel band PCB Part.no: ........................... 4001 Standard kit "Clamp Kit". ....................................................................... containing: ........................................................Steel band PCB 30 m

........................................................... Fastener PCF 25 st ................................................................ 10 Band splices

Range of application

To affix components to pipes, barrels, drums, cisterns etc. A flexible system for all diameters.

Application example

VärmeKabelTeknik

Accessories 15

Notes .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... .................................................................................................................................................................................................... ....................................................................................................................................................................................................

Accessories 16

VärmeKabelTeknik

Telephone: +46‐301‐418 40 – Email: info@vkts.se – Homepage: www.vkts.se

Industrihuset

Södra Hedensbyn 43

S‐430 64 HÄLLINGSJÖ

S‐931 91 SKELLEFTEÅ

Sweden

Fax: +46‐301‐418 70

Fax: +46‐910‐881 33