Our Edge | The Show Series

OUR EDGE THE SHOW SERIES | PORTABLE STALLS

CLASSIC SHOW SERIES | BLUE VINYL • BLACK POWDER COAT

STEEL FRAME

1

STEEL BARS

2

Our Show Series stalls feature sturdy 14-gauge galvanized steel frames – serving as the foundation of the toughest portable horse stalls on the market.

1

16-gauge pre-galvanized steel bars make up the interior of Show Series stalls – unlike competitors who use 18-gauge steel bars. Our 16-gauge interior bars withstand even the mightiest of horses.

VINYL | FOAM

2 3

3

Show Series stalls sport four layers of industrial grade foam covered by two pieces of vinyl (40 oz) seamlessly stitched with nylon webbing (1400gsm). This combination of materials stands up to the daily shenanigans in any barn environment.

CENTERED DOOR

4

4

5

Show Series stalls are exclusively designed with centered, swinging doors – never designed with off-centered doors. Our centered door design allows the horse and human to safely move in and out of each respective stall.

BOTTOM OPENING

5

Our design leaves a 1” opening between the bottom of the door and the bottom of the stall’s steel frame.

This gap minimizes the amount of hay, grain, shavings, and straw kicked out by playful horses.

BAR SPACING

ELITE SHOW SERIES | HUNTER GREEN VINYL • BRONZE POWDER COAT

6

7

7

9 8

Our rounded vertical bars are spaced less than 3” apart. This spacing allows horses to see their neighbors while mitigating the risk of any unruly behavior – all while allowing for superior ventilation.

DOOR STOPPER A rectangular piece of steel is welded to the top of each door to prevent the door from swinging inside to the stall when the steel is unlocked. This feature extends the longevity of our hinges as it reduces any inward movement.

WELDED RINGS

6 10

8

Four steel rings are welded between vertical bars on each stall panel; designed for standard double-end snaps. This allows equestrians to easily hang feed and water buckets, nets, toys, treats, halters, blankets, and sheets.

WELDED HINGES

9

Hinges come fully welded onto each frame – removing the need for installation hardware and door assembly. Our hinges are welded to ensure that your door remains level for years to come.

STEEL PLATE (BACK)

10

A carefully rounded steel plate is placed behind our locking mechanism to ensure that horses do not tamper with the lock. This plate also protects your hands from curious horses when unlocking and locking a stall