Learn to Free Up Memory to Make Your Computer Run Faster The RAM influences indirectly on the performance speed of the processor installed on your computer, which holds the information of programs open in address to be accessed faster. If it is too busy to run or you have very little of it installed on your computer amount, program information will need to be transferred from the hard drive, CD, Zip disk, USB stick, etc. to RAM when in use, taking more time in the process. Thus, the greater amount of RAM memory, the instructions may be stored and larger programs to be loaded at one time and in less time. Signs that the RAM is insufficient begin to appear when programs that require graphics capabilities start getting slow to load and after some time of usage - even light applications take much longer and take up more processing.
When you receive a warning from the operating system indicating "Insufficient Memory" or "Insufficient Virtual Memory", this is because of a program that had requested the opening and it does not "fit" in RAM. You can free up memory and increase performance quite simply, using Amigabit PowerBooster Memory Manager. The Memory Manager is a program whose goal is to clear the RAM addresses that are no longer being used by the computer, in order to improve computer running speed. The program interface consists of two tabs containing tools grouped into categories, making it easier to view. When starting the program, you need to first have a full scan on your computer. Then you would see a graph showing the rate of use of RAM, Virtual Memory and CPU. At the bottom of the program window, it shows the general status of the computer. State levels indicate how much memory is in use on the computer. "Good" indicates use between 0% and 30%, "Good" between 30% and 60%, "Medium" between 60% and 80%, and "Bad" between 80% and 100%. After the scanning, just click Clean button to free up memory directly on your computer to boost it performance.