GB
10.06
FGV SLOVAKIA, Spol s r.o. Partizánska cesta 73, P.O.BOX 87 957 01 Bánovce nad Bebravou - SLOVAKIA Tel. +421 (0) 38 7626 100 Fax +421 (0) 38 7626 105 info@fgv.sk
Hinges
FGVTN BRASIL LTDA. Rua Francisco Derosso, 1352 Curitiba Paranà 81710 000 - BRASIL Tel. +55 41 2107 4411 Fax +55 41 3275 3038 fgvtn@fgvtnbrasil.com.br http://www.fgvtnbrasil.com.br FGV ASIA Limited 2503A-2505, 113 Argyle Street Kowloon, Hong Kong - P R CHINA Tel.+852 2648 7419 Fax +852 2648 7389 info@fgvasia.com www.fgvasia.com FGV (Guangzhou) Company Limited Units 2710-2711, Yang Cheng International Trading Centre East Tower, Ti Yu Dong Lu, No. 122 Guangzhou - P R CHINA Tel. +86 20 38870570 Fax +86 20 38870323 info@fgvchina.com www.fgvchina.com DEUTSCHE FGV Formenti & Giovenzana Möbelbeschläge GmbH Industriestr. 44 D-33397 Rietberg - GERMANY Tel. +49 (0) 5244-9708-0 Fax +49 (0) 5244-9708-15 http://www.fgvgermany.com FORMENTI & GIOVENZANA POLSKA Sp. z o.o. Ul. Boleslawiecka 8a 98-400 Wieruszów - POLAND Tel. +48 62 58 10 400 Fax +48 62 58 10 480 http://www.fgvpolska.pl FGV LIFESTYLES INDIA Pvt. Ltd. B 104 Abhinav Apartments Shradhanand Road Vile Parle (East) Mumbai 400057 - INDIA Tel. +91 2226180007 / 26101534 Fax +91 2226180006 fgvlifestyles@vsnl.net FGV AMERICA, Inc. PO Box 691 056 Charlotte, NC 28227-7018 Tel. +1 800 619 5446 Fax +1 800 876 7454 http://www.fgv.it CRESTWOOD FITTINGS Ltd. Crestwood House St. Martin's Stamford Lincolnshire PE9 2LG - U.K. Tel. +44 (0) 1780-753407 Fax +44 (0) 1780-752344 www.crestwood.co.uk
FORMENTI & GIOVENZANA S.p.A. Via Concordia, 16 20050 Veduggio con Colzano (MI) - ITALY Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788 http://www.fgv.it - info@fgv.it
CONTEC - INTERNATIONAL 131, rue de Paris F - 94220 Charenton-Le-Pont - FRANCE Tel. +33 (0) 1 56 29 15 15 Fax +33 (0) 1 56 29 15 16 http://www.contec-international.com
The right collection
C
M
Y
CM
MY
CY CMY
K
Hinges Program Formenti & Giovenzana began operating in 1947, in the craft production of decorative accessories, today it is one of the most qualified companies in the worldwide furniture fittings market. The company philosophy has always been to work in close co-operation with its customers, who are listed among the
• Special hinges for positive angles from
worlds largest industrial groups.
15° to 90° and negative angles
Formenti & Giovenzana is constantly
• Hinges for shallow doors
committed to achieving global quality in
• Hinges for glass doors
all our products, and we carry out quality
• Hinges for doors with aluminium frame
analyses in both the design and
• Special hinges for flap doors
production stages. Systematic sampling and controls take
All hinges have easy and rapid adjustment
place to check the durability and resistance
systems.
of the products, and laboratory tests
Besides the traditional fixing system FGV
compare the product performance with
offers various versions, Zip System with
the design characteristics.
no-tool mounting for cup. Velofix and
The variety of hinge that Formenti &
X-Pando Systems that allow to reduce
Giovenzana offers is certainly one of the
the assembly times.
most complete and offers: • Hinges for opening angles of 95° - 110° 125° and 175°
C
M
Y
CM
MY
CY CMY
K
Index Series Optima
2÷13
Series M Click
14÷33
Series M Slide-On
34÷57
Series QS
58÷69
Series Institutional
70÷71
Assembly machines
72÷73
Symbols used in the catalogue In order to select the exact features of the most suitable hinge for each specific application, various details concerning the required installation have to be considered. Those features are as follows: H
H = Door height
18÷22 Kg
260 240 220
B
C
H
MINIMUM GAP
DRILLING DIAMETER
OVERLAY
MOUNTING PLATE THICKNESS
7÷12 Kg
A
13÷17 Kg
200 180 160 140 120
Table to determinate the number of hinges to be used according to the door height:
100
4÷6 Kg
80 60 40 20
L
K
S
T
CLOSING GAP
DRILLING DISTANCE
SIDE THICKNESS
DOOR THICKNESS
0
-10
0
20
40
60
80
L
L = Door width
1
C
M
Y
CM
MY
CY CMY
K
Optima. The right look With its classic chic look made to last as long as the quality furniture it fits, the Optima hinge makes the right steatement. Based on state of the art technologies, the product range is the result of clever design as well as the huge experience of cost effective large volume manufacturing.
Avant garde design Rapid fixing M-Click system Independent adjustment
Adjusting System
Depth adjustment
Independent side adjustment
Vertical adjustment
Acting on the "A" screw it is possible to adjust the distance between the side of the cabinet and the door.
Acting on the "B" screw it is possible to change the amount of the door covering on the side of the cabinet.
Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically.
2
C
M
Y
CM
MY
CY CMY
K
Series Optima
Mounting System
A
B
C
Place the front part of the hinge on the front side of the mounting plate.
Rotate the arm of the hinge.
Press down the rear part of the hinge to Click on.
3
C
Series Optima
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 48 X 6 mm METAL SCREWS FIXING *
METAL DOWELS FIXING
Ø35
11
11
12
The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation
METAL - FIXING WITH EURO SCREWS PREMOUNTED
Ø10
Ø35
Ø35
48
48
Ø
Hinges: 48
H
5
0
5
0
8
0
0
0
0
0 -ITALY-
-ITALY-
-ITALY-
VARIATIONS
HINGES OPENING
110° PAG 6
HINGES OPENING
125°
K
CRANK
K
FINISH OR COLOUR
ARTICLE
K
FAMILY
K
S
6
X
6
1
6
5
Crank 0
51.XSH5.05.00.0
51.XSH6.05.00.*
51.XSH6.05.00.M
5
Crank 8
51.XSH5.05.08.0
51.XSH6.05.08.*
51.XSH6.05.08.M
5
Crank 15
51.XSH5.05.15.0
51.XSH6.05.15.*
51.XSH6.05.15.M
5
Crank 0
51.XKH5.M5.00.0
51.XKH6.M5.00.*
51.XKH6.M5.00.M
5
Crank 8
51.XKH5.M5.08.0
51.XKH6.M5.08.*
51.XKH6.M5.08.M
5
Crank 0
51.XWH5.M5.00.0
51.XWH6.M5.00.*
51.XWH6.M5.00.M
5
Crank 8
51.XWH5.M5.08.0
51.XWH6.M5.08.*
51.XWH6.M5.08.M
5
Crank 24°÷30°
51.XH85.05.30.0
51.XH86.05.30.*
51.XH86.05.30.M
5
Crank 45°
51.XH85.05.45.0
51.XH86.05.45.*
51.XH86.05.45.M
5
Crank 90°
51.XH85.M5.90.0
51.XH86.M5.90.*
51.XH86.M5.90.M
5
PAG 7
HINGES OPENING
175° PAG 8 HINGES FOR CORNER CABINETS
110° PAG 9
HINGES FOR DOORS WITH ALUMINIUM FRAME
Crank 0
Crank 8
105° Grooved profile
PAG 10
Lock fixing
PAG 11
Crank 15
* Available with premounted selftapping screws
4
* 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
C
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 45 X 9.5 mm METAL - FIXING WITH VELOFIX SYSTEM
METAL - FIXING WITH ZIP SYSTEM
METAL SCREWS FIXING *
METAL DOWELS FIXING
METAL - FIXING WITH EURO SCREWS PREMOUNTED
METAL - FIXING WITH VELOFIX SYSTEM
-ITALY-
-ITALY-
K
K
-ITALY-
K
11 45
45
Ø10
Ø35
45
-ITALY-
9.5
6
6
Ø35
-ITALY-
-ITALY-
K
45
Ø35
9.5
48
Ø8
K
Ø35
6
48
Ø35
9.5
Ø10
K
Ø35
9.5
Ø10
11
11
12
ED
M
51.XSH8.05.00.V
51.XSL0.05.00.0
51.XSH5.05.00.C
51.XSH6.05.00.S
51.XSH6.05.00.N
51.XSH8.05.00.U
M
51.XSH8.05.08.V
51.XSL0.05.08.0
51.XSH5.05.08.C
51.XSH6.05.08.S
51.XSH6.05.08.N
51.XSH8.05.08.U
M
51.XSH8.05.15.V
51.XSL0.05.15.0
51.XSH5.05.15.C
51.XSH6.05.15.S
51.XSH6.05.15.N
51.XSH8.05.15.U
M
51.XKH8.M5.00.V
51.XKL0.M5.00.0
51.XKH5.M5.00.C
51.XKH6.M5.00.S
51.XKH6.M5.00.N
51.XKH8.M5.00.U
M
51.XKH8.M5.08.V
51.XKL0.M5.08.0
51.XKH5.M5.08.C
51.XKH6.M5.08.S
51.XKH6.M5.08.N
51.XKH8.M5.08.U
M
51.XWH8.M5.00.V
51.XWL0.M5.00.0
51.XWH5.M5.00.C
51.XWH6.M5.00.S
51.XWH6.M5.00.N
51.XWH8.M5.00.U
M
51.XWH8.M5.08.V
51.XWL0.M5.08.0
51.XWH5.M5.08.C
51.XWH6.M5.08.S
51.XWH6.M5.08.N
51.XWH8.M5.08.U
M
51.XH88.05.30.V
51.XL90.05.30.0
51.XH85.05.30.C
51.XH86.05.30.S
51.XH86.05.30.N
51.XH88.05.30.U
M
51.XH88.05.45.V
51.XL90.05.45.0
51.XH85.05.45.C
51.XH86.05.45.S
51.XH86.05.45.N
51.XH88.05.45.U
M
51.XH88.M5.90.V
51.XL90.M5.90.0
51.XH85.M5.90.C
51.XH86.M5.90.S
51.XH86.M5.90.N
51.XH88.M5.90.U
* Available with premounted selftapping screws
C
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 52 X 5.5 mm METAL SCREWS FIXING *
METAL DOWELS FIXING
METAL - FIXING WITH EURO SCREWS PREMOUNTED
METAL - FIXING WITH VELOFIX SYSTEM
METAL - FIXING WITH ZIP SYSTEM
11
11
12
METAL - FIXING WITH ZIP SYSTEM
52
Ø35
52
52 5.5
5.5
Ø35
-ITALY-
Ø10
Ø35
Ø35
52
52
-ITALY-
-ITALY-
-ITALY-
Ø10
5.5
45
Ø10
5.5
Ø35
5.5
Ø35
9.5
Ø8
-ITALY-
K
K
K
K
K
K
-ITALY-
U
51.XSL0.05.00.S
51.XSH5.05.00.B
51.XSH6.05.00.B
51.XSH6.05.00.E
51.XSH8.05.00.Z
51.XSL0.05.00.B
U
51.XSL0.05.08.S
51.XSH5.05.08.B
51.XSH6.05.08.B
51.XSH6.05.08.E
51.XSH8.05.08.Z
51.XSL0.05.08.B
U
51.XSL0.05.15.S
51.XSH5.05.15.B
51.XSH6.05.15.B
51.XSH6.05.15.E
51.XSH8.05.15.Z
51.XSL0.05.15.B
U
51.XKL0.M5.00.S
51.XKH5.M5.00.B
51.XKH6.M5.00.B
51.XKH6.M5.00.E
51.XKH8.M5.00.Z
51.XKL0.M5.00.B
U
51.XKL0.M5.08.S
51.XKH5.M5.08.B
51.XKH6.M5.08.B
51.XKH6.M5.08.E
51.XKH8.M5.08.Z
51.XKL0.M5.08.B
U
51.XWL0.M5.00.S
51.XWH5.M5.00.B
51.XWH6.M5.00.B
51.XWH6.M5.00.E
51.XWH8.M5.00.Z
51.XWL0.M5.00.B
U
51.XWL0.M5.08.S
51.XWH5.M5.08.B
51.XWH6.M5.08.B
51.XWH6.M5.08.E
51.XWH8.M5.08.Z
51.XWL0.M5.08.B
U
51.XL90.05.30.S
51.XH85.05.30.B
51.XH86.05.30.B
51.XH86.05.30.E
51.XH88.05.30.Z
51.XL90.05.30.B
U
51.XL90.05.45.S
51.XH85.05.45.B
51.XH86.05.45.B
51.XH86.05.45.E
51.XH88.05.45.Z
51.XL90.05.45.B
U
51.XL90.M5.90.S
51.XH85.M5.90.B
51.XH86.M5.90.B
51.XH86.M5.90.E
51.XH88.M5.90.Z
51.XL90.M5.90.B
* Available with premounted selftapping screws
C
CENTRA
M
Y
CM
MY
CY CMY
K
ALUMINIUM
METAL - FIXING WITH CENTRA SYSTEM
FIXING TO GROOVED PROFILE
LOCK FIXING
4
9
Ø
7
16.5
28 0 19 -+ 0.15
48 x 6 - hole Ø 10 45 x 9.5 - hole Ø 8
3.6 2.5
6.15
+ 0.
05
12.7
K
- 0 95 R4.
32.1
+ 0.1 - 0
51.XSHC.05.00.0 51.XSHC.05.08.0 51.XSHC.05.15.0 51.XKHC.05.00.0 51.XKHC.05.08.0
51.XH8C.05.30.0 51.XH8C.05.45.0 51.XH8C.M5.90.0
51.XS91.05.00.000
51.XS81.05.00.000
51.XS91.05.08.000
51.XS81.05.08.000
51.XS91.05.15.000
51.XS81.05.15.000
5
C
M
Y
CM
MY
CY CMY
K
Series Optima - Opening 110° Technical specifications: - Depth of the metal cup 11.3 mm. - Cup diameter 35 mm. - Opening 110° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T
T
H
H K
K
A
Crank 0
A
S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
T
K
H
A
S
Crank 15
H=A+K-1
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.57
0.74
1.11
1.45
1.81
2.38
3.10
3.92
4.71
6.69
6.51
K = 4
A=
0.55
0.72
1.05
1.39
1.75
2.25
2.87
3.60
4.36
5.73
6.03
K = 5
A=
0.53
0.70
0.99
1.33
1.67
2.12
2.64
3.28
4.01
4.77
5.55
K = 6
A=
0.51
0.69
0.93
1.27
1.61
1.99
2.49
3.05
3.69
4.41
5.18
K = 7
A=
0.50
0.67
0.87
1.21
1.55
1.89
2.35
2.85
3.46
4.10
4.82
D
H D = 4.5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
6
C
M
Y
CM
MY
CY CMY
K
Series Optima - Opening 125° Technical specifications: - Depth of the metal cup 12,3 mm. - Cup diameter 35 mm. - Opening 125° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8 mm. crank.
T
T
H
H K K
A
Crank 0
S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
A
H = (6 + A + K) - S
Hinge for partial lay-on doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.92
1.39
1.89
2.39
2.96
3.61
4.25
4.89
5.53
6.18
6.82
K = 4
A=
0.86
1.25
1.75
2.25
2.75
3.37
4.01
4.66
5.30
5.94
6.59
K = 5
A=
0.80
1.11
1.61
2.11
2.54
3.13
3.77
4.43
5.07
5.70
6.36
D
H D = 4 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
7
C
M
Y
CM
MY
CY CMY
K
Series Optima - Opening 175° Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 165° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8 mm. crank.
T
T
H K
H K
A
Crank 0
A
S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.00
0.00
0.00
0.00
0.00
0.00
0.2
0.54
6.78
8.12
13.55
K = 4
A=
0.00
0.00
0.00
0.00
0.00
0.05
0.27
3.48
5.86
7.24
12.55
K = 5
A=
0.00
0.00
0.00
0.00
0.00
0.06
0.29
3.55
4.89
6.24
11.55
K = 6
A=
0.00
0.00
0.00
0.00
0.00
0.06
0.39
2.97
3.9
5.24
10.55
K = 7
A=
0.00
0.00
0.00
0.00
0.00
0.07
1.2
2.2
3.16
4.24
9.55
H D
H D=9-H-K
D
K
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
8
D = 1 + H + Crank height
C
M
Y
CM
MY
CY CMY
K
Series Optima Hinges for corner cabinets Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 110° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
HINGE FOR CABINETS WITH 24°÷30° ANGLES
HINGE FOR CABINETS WITH 45° ANGLES 45°
30°
H=4 H=4 5
K=
6 K=
37
37
24°
45°
4. 5
H=2
H=4 K=
5
K=
5
39.5
37
HINGE FOR BLIND CORNER CABINETS 90°
°
90
H=4
20 K=5
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
9
C
M
Y
CM
MY
CY CMY
K
Series Optima - Hinges for doors with aluminium frame, grooved profile Technical specifications: - Depth of the zamak cup 9,9 mm. - Cup drilling 28 x 7 mm. - Opening 105° - Aluminium frame (K) min. 19 to max. 25 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H
H P
P A
Crank 0
S
S
A
Crank 8
H = (P + A - 2) - S
Hinge for lay-on doors
H = (P + A - 10) - S
Hinge for partial lay-on doors
Drilling diagram Ø 4 mm. holes with 120° countersink on aluminium frame; suggested screw: 3,5 x 12 mm., item 1A05512105000, provided on request. H
A P
Crank 15
4 Ø
16.5
7
19
6.15
28 S
H = P - 17 + A
95
R4.
32.1
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors.
P P P P P P P
= = = = = = =
19 20 21 22 23 24 25
T=
19
20
21
22
23
24
25
26
A= A= A= A= A= A= A=
0.4 0.4 0.4 0.4 0.4 0.3 0.3
0.65 0.6 0.5 0.5 0.5 0.5 0.5
1 0.8 0.75 0.75 0.75 0.7 0.7
1.4 1.2 1.1 1.0 0.9 0.9 0.9
2.3 1.7 1.3 1.4 1.3 1.2 1.1
3.2 2.6 2.1 1.8 1.6 1.54 1.4
4.0 3.4 2.9 2.5 2.2 2.0 1.9
5.0 4.3 3.7 3.3 2.9 2.6 2.4
P = Width of the frame
D
H S
D = 5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
10
C
M
Y
CM
MY
CY CMY
K
Series Optima - Hinges for doors with aluminium frame, lock fixing Technical specifications: - Opening 105° - Aluminium frame (K) min. 3 to max. 6 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H H A
S
A S
Crank 0
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Assembly instructions:
H
A
S
Crank 15
H=A+K-1
Hinge for inset doors
Connecting joints:
Example of aluminium profiles: 20.8
20.5 K=4
K=6 20
17.9 23.5
28
5.6 8
5.2 5.2
2 Holes - Art. 510A31072F000 4 Holes - Art. 510A31074F000
20.5
20.5 K=4
K=4
6.7 1.2 5.2
17.9 23.5
D
H
5.6 45 5.2
S
38.3
D = 4,5 + H + Crank height
7.3
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
11
C
M
Y
CM
MY
CY CMY
K
Rapid fixing for Optima hinges Zip System
Hinge Cup Ø35 - Ø26:
The best system on the market tool free.
Insert by hand the hinge on the door. Push to fix the hinge.
Velofix System Quick system to mount the hinge on the door.
90°
Insert by hand the hinge on the door. Turn the screw at 90° to stop.
12
C
M
Y
CM
MY
CY CMY
K
X-pando System Hinge with 8 and 10 mm. Ă˜ expanding dowels and screws, pre-mounted.
Insert by hand the hinge on the door. Tighten the screws.
Centra System No tool mounting system
Insert by hand the hinge in the door
Lower the lever to stop
13
C
M
Y
CM
MY
CY CMY
K
Series M Click Designed with the latest Computer Technology, coupled with 50 years of experience in hinge production. The M Click Series offers a unique combination of strength, reliability and fast, easy, tool-less assembly.
Quick and safe hinge-plate Modular Easy and fast adjustment
Adjusting System
Independent side adjustment
Front adjustment
Vertical adjustment
Acting on the "A" screw it is possible to change the amount of the door covering on the side of the cabinet.
Acting on the "B" screw it is possible to adjust the distance between the side of the cabinet and the door.
Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically.
14
C
M
Y
CM
MY
CY CMY
K
Series M Click
Mounting System
A
B
C
Place the front part of the hinge on the front side of the mounting plate.
Rotate the arm of the hinge.
Press down the rear part of the hinge to Click on.
15
C
Series M Click
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 48 X 6 mm METAL SCREWS FIXING *
METAL DOWELS FIXING
Ø35
11
11
12
The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation
METAL - FIXING WITH EURO SCREWS PREMOUNTED
Ø10
Ø35
Ø35
48
48
Ø
Hinges: 48
H
5
0
5
0
8
0
0
0
0
0 -ITALY-
-ITALY-
-ITALY-
VARIATIONS
K
CRANK
K
FINISH OR COLOUR
ARTICLE
K
FAMILY
K
S
6
M
6
1
6
5
Crank 0
51.MSH5.05.00.0
51.MSH6.05.00.*
51.MSH6.05.00.M
5
Crank 4
51.MSH5.05.04.0
51.MSH6.05.04.*
51.MSH6.05.04.M
5
Crank 8
51.MSH5.05.08.0
51.MSH6.05.08.*
51.MSH6.05.08.M
5
Crank 15
51.MSH5.05.15.0
51.MSH6.05.15.*
51.MSH6.05.15.M
5
Crank 0
51.MKH5.M5.00.0
51.MKH6.M5.00.*
51.MKH6.M5.00.M
5
Crank 8
51.MKH5.M5.08.0
51.MKH6.M5.08.*
51.MKH6.M5.08.M
5
Crank 0
51.MWH5.S5.00.0
51.MWH6.S5.00.*
51.MWH6.S5.00.M
5
Crank 8
51.MWH5.M5.08.0
51.MWH6.M5.08.*
51.MWH6.M5.08.M
5
Crank 0
51.MTH5.05.00.0
51.MTH6.05.00.*
51.MTH6.05.00.M
5
Crank 8
51.MTH5.05.08.0
51.MTH6.05.08.*
51.MTH6.05.08.M
5
Crank 15
51.MTH5.05.15.0
51.MTH6.05.15.*
51.MTH6.05.15.M
5
51.MKK5.M5.25.0
51.MKK6.M5.25.*
51.MKK6.M5.25.M
5
Crank 24°÷30°
51.MH85.05.30.0
51.MH86.05.30.*
51.MH86.05.30.M
5
Crank 45°
51.MH85.M5.45.0
51.MH86.M5.45.*
51.MH86.M5.45.M
5
PAG 23 Crank 90°
51.MH85.05.90.0
51.MH86.05.90.*
51.MH86.05.90.M
5
51.MH83.05.35.0
51.MH84.05.35.*
51.MH84.05.35.M
5
HINGES OPENING
110° PAG 18 HINGES OPENING
125° PAG 19 HINGES OPENING
175° PAG 20 HINGES Ø 35 FOR THICK DOORS
90° PAG 21
Crank 0
HINGES Ø 40 FOR THICK DOORS
Crank 8
90°
Crank 15
PAG 22 Crank 22 Crank
HINGES FOR CORNER CABINETS
110° HINGES Ø 26 FOR WOOD AND/OR GLASS DOORS
25°
Crank 0 Crank 8
90° WOOD
PAG 24
GLASS
PAG 25
HINGES FOR DOORS WITH ALUMINIUM FRAME
Crank 15
Crank 0 Crank 8
105° Grooved profile
PAG 26
Lock fixing
PAG 27
Crank 15
HINGES FOR ANGLED CABINETS
PAG 28
16
* Available with premounted selftapping screws
* 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
C
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 45 X 9.5 mm METAL - FIXING WITH VELOFIX SYSTEM
METAL SCREWS FIXING *
METAL DOWELS FIXING
METAL - FIXING WITH EURO SCREWS PREMOUNTED
METAL - FIXING WITH VELOFIX SYSTEM
METAL SCREWS FIXING *
Ø10
11
11
Ø35
Ø35
45
52 5.5 -ITALY-
K
9.5
9.5 -ITALY-
-ITALY-
Ø1
K
45
-ITALY-
-ITALY-
K
-ITALY-
K
45
K
6
Ø35
K
45
Ø35
9.5
48
Ø8
K
Ø35
9.5
Ø35
6
Ø10
11
11
12
TE
M
51.MSH8.05.00.V
51.MSH5.05.00.C
51.MSH6.05.00.S
51.MSH6.05.00.N
51.MSH8.05.00.U
51.MSH5.05.00.B
5
M
51.MSH8.05.04.V
51.MSH5.05.04.C
51.MSH6.05.04.S
51.MSH6.05.04.N
51.MSH8.05.04.U
51.MSH5.05.04.B
5
M
51.MSH8.05.08.V
51.MSH5.05.08.C
51.MSH6.05.08.S
51.MSH6.05.08.N
51.MSH8.05.08.U
51.MSH5.05.08.B
5
M
51.MSH8.05.15.V
51.MSH5.05.15.C
51.MSH6.05.15.S
51.MSH6.05.15.N
51.MSH8.05.15.U
51.MSH5.05.15.B
5
M
51.MKH8.M5.00.V
51.MKH5.M5.00.C
51.MKH6.M5.00.S
51.MKH6.M5.00.N
51.MKH8.M5.00.U
51.MKH5.M5.00.B
5
M
51.MKH8.M5.08.V
51.MKH5.M5.08.C
51.MKH6.M5.08.S
51.MKH6.M5.08.N
51.MKH8.M5.08.U
51.MKH5.M5.08.B
5
M
51.MWH8.S5.00.V
51.MWH5.S5.00.C
51.MWH6.S5.00.S
51.MWH6.S5.00.N
51.MWH8.S5.00.U
51.MWH5.S5.00.B
5
M
51.MWH8.M5.08.V
51.MWH5.M5.08.C
51.MWH6.M5.08.S
51.MWH6.M5.08.N
51.MWH8.M5.08.U
51.MWH5.M5.08.B
51
M
51.MTH8.05.00.V
51.MTH5.05.00.C
51.MTH6.05.00.S
51.MTH6.05.00.N
51.MTH8.05.00.U
51.MTH5.05.00.B
5
M
51.MTH8.05.08.V
51.MTH5.05.08.C
51.MTH6.05.08.S
51.MTH6.05.08.N
51.MTH8.05.08.U
51.MTH5.05.08.B
5
M
51.MTH8.05.15.V
51.MTH5.05.15.C
51.MTH6.05.15.S
51.MTH6.05.15.N
51.MTH8.05.15.U
51.MTH5.05.15.B
5
M
51.MKK8.M5.25.V
51.MKK5.M5.25.C
51.MKK6.M5.25.S
51.MKK6.M5.25.N
51.MKK8.M5.25.U
51.MKK5.M5.25.B
5
M
51.MH88.05.30.V
51.MH85.05.30.C
51.MH86.05.30.S
51.MH86.05.30.N
51.MH88.05.30.U
51.MH85.05.30.B
5
M
51.MH88.M5.45.V
51.MH85.M5.45.C
51.MH86.M5.45.S
51.MH86.M5.45.N
51.MH88.M5.45.U
51.MH85.M5.45.B
5
M
51.MH88.05.90.V
51.MH85.05.90.C
51.MH86.05.90.S
51.MH86.05.90.N
51.MH88.05.90.U
51.MH85.05.90.B
5
M
51.MH88.05.35.V
51.MH83.05.35.C
51.MH84.05.35.S
51.MH84.05.35.N
51.MH88.05.35.U
51.MH83.05.35.B
5
* Available with premounted selftapping screws
* Available with premounted selftapping screws
C
MY
METAL SCREWS FIXING
5
51.MSH6.05.00.E
51.MSH8.05.00.Z
B
51.MSH6.05.04.B
51.MSH6.05.04.E
51.MSH8.05.04.Z
B
51.MSH6.05.08.B
51.MSH6.05.08.E
51.MSH8.05.08.Z
B
51.MSH6.05.15.B
51.MSH6.05.15.E
51.MSH8.05.15.Z
B
51.MKH6.M5.00.B
51.MKH6.M5.00.E
51.MKH8.M5.00.Z
B
51.MKH6.M5.08.B
51.MKH6.M5.08.E
51.MKH8.M5.08.Z
B
51.MWH6.S5.00.B
51.MWH6.S5.00.E
51.MWH8.S5.00.Z
B
51.MWH6.M5.08.B
51.MWH6.M5.08.E
51.MWH8.M5.08.Z
B
51.MTH6.05.00.B
51.MTH6.05.00.E
51.MTH8.05.00.Z
B
51.MTH6.05.08.B
51.MTH6.05.08.E
51.MTH8.05.08.Z
B
51.MTH6.05.15.B
51.MTH6.05.15.E
51.MTH8.05.15.Z
B
51.MKK6.M5.25.B
51.MKK6.M5.25.E
51.MKK8.M5.25.Z
B
51.MH86.05.30.B
51.MH86.05.30.E
51.MH88.05.30.Z
B
51.MH86.M5.45.B
51.MH86.M5.45.E
51.MH88.M5.45.Z
B
51.MH86.05.90.B
51.MH86.05.90.E
51.MH88.05.90.Z
Ø26
52
-ITALY-
-ITALY-
K
K
K
51.MSH6.05.00.B
Ø40
51.MH45.05.00.0
51.MH46.05.00.0
51.MH45.05.08.0
51.MH46.05.08.0
51.MH45.05.15.0
51.MH46.05.15.0
51.MH45.05.22.0
51.MH46.05.22.0
K
5.5
5.5
B
Ø10
7.5
52
-ITALY-
-ITALY-
NYLON FOR GLASS DOORS
11 Ø40
52
7.5
Ø35
K
52
K
K
METAL DOWELS FIXING
11 52
Ø10
5.5
Ø35
-ITALY-
CY CMY
12.8
METAL - FIXING WITH VELOFIX SYSTEM
12 11
Ø35
5.5
Ø10
CM
12.8
METAL - FIXING WITH EURO SCREWS PREMOUNTED
Y
CUP HOLE D. 52 X 7.5 mm
CUP HOLE DISTANCE 52 X 5.5 mm METAL DOWELS FIXING
M
51.MGH1.21.00.0 51.MGH1.21.08.0 51.MGH1.21.15.0
B
51.MH84.05.35.B
51.MH84.05.35.E
51.MH88.05.35.Z
*1 *3
= White = Black
C
M
Y
CM
MY
CY CMY
CUP HOLE DISTANCE 38 X 8 mm
ALUMINIUM LOCK FIXING
4
9
Ø
16.5
28 0 19 -+ 0.15
7
12
11 Ø10
Ø26
FIXING TO GROOVED PROFILE
11.65
METAL - FIXING WITH EURO SCREWS PREMOUNTED 11.65
METAL DOWELS FIXING 11.65
METAL SCREWS FIXING *
K
Ø26
Ø26
3.6 2.5 38
38
+ 0.
8
32.1
51.MGH5.05.00.0
51.MGH6.05.00.*
51.MGH6.05.00.M
51.MGH5.05.08.0
51.MGH6.05.08.*
51.MGH6.05.08.M
51.MGH5.05.15.0
51.MGH6.05.15.*
51.MGH6.05.15.M
* Available with premounted selftapping screws
05
- 0 95 R4.
12.7
K
8 K
K
8
6.15
38
* 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
+ 0.1 - 0
51.MS91.05.00.000
51.MS81.05.00.000
51.MS91.05.08.000
51.MS81.05.08.000
51.MS91.05.15.000
51.MS81.05.15.000
17
C
M
Y
CM
MY
CY CMY
K
Series M Click - Opening 110° Technical specifications: - Depth of the metal cup 11.3 mm. - Cup diameter 35 mm. - Opening 110° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 4, 8, 15 mm. crank.
T
T
H K
H K
A
Crank 0
A
S
S
Crank 4
H = (14 + A + K) - S
Hinge for lay-on doors
H = (10 + A + K) - S
Hinge for partial lay-on doors
T
T
H K
K
A
H
A
S S
Crank 8
Crank 15
H = (6 + A + K) - S
Hinge for partial lay-on doors
H=A+K-1
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.57
0.74
1.11
1.45
1.81
2.38
3.10
3.92
4.71
6.69
6.51
K = 4
A=
0.55
0.72
1.05
1.39
1.75
2.25
2.87
3.60
4.36
5.73
6.03
K = 5
A=
0.53
0.70
0.99
1.33
1.67
2.12
2.64
3.28
4.01
4.77
5.55
K = 6
A=
0.51
0.69
0.93
1.27
1.61
1.99
2.49
3.05
3.69
4.41
5.18
K = 7
A=
0.50
0.67
0.87
1.21
1.55
1.89
2.35
2.85
3.46
4.10
4.82
D
H D = 4.5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
18
C
M
Y
CM
MY
CY CMY
K
Series M Click - Opening 125° Technical specifications: - Depth of the metal cup 12,3 mm. - Cup diameter 35 mm. - Opening 125° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8 mm. crank.
T
T
H
H K K
A
Crank 0
A S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.92
1.39
1.89
2.39
2.96
3.61
4.25
4.89
5.53
6.18
6.82
K = 4
A=
0.86
1.25
1.75
2.25
2.75
3.37
4.01
4.66
5.30
5.94
6.59
K = 5
A=
0.80
1.11
1.61
2.11
2.54
3.13
3.77
4.43
5.07
5.70
6.36
D
H D = 4 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
19
C
M
Y
CM
MY
CY CMY
K
Series M Click - Opening 175° Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 165° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8 mm. crank.
T
T
H K
H K
A
Crank 0
A
S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.00
0.00
0.00
0.00
0.00
0.00
0.2
0.54
6.78
8.12
13.55
K = 4
A=
0.00
0.00
0.00
0.00
0.00
0.05
0.27
3.48
5.86
7.24
12.55
K = 5
A=
0.00
0.00
0.00
0.00
0.00
0.06
0.29
3.55
4.89
6.24
11.55
K = 6
A=
0.00
0.00
0.00
0.00
0.00
0.06
0.39
2.97
3.9
5.24
10.55
K = 7
A=
0.00
0.00
0.00
0.00
0.00
0.07
1.2
2.2
3.16
4.24
9.55
H D
H D
K
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
20
D = 1 + H + Crank height
C
M
Y
CM
MY
CY CMY
K
Series M Click - Hinges Ø 35 for thick doors Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 95° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 30 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T
T
H
H K K
A
Crank 0
A S
S
Crank 8
H = (14.5 + A + K) - S
H = (6.5 + A + K) - S
Hinge for partial lay-on doors
Hinge for lay-on doors
T
K
H
A
S
Crank 15
H = A + K - 0.5
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
K = 3
A=
0.00
0.16
0.33
0.50
0.68
0.85
1.15
1.67
2.54
3.41
4.27
5.21
6.15
7.08
8.02
K = 4
A=
0.00
0.14
0.31
0.49
0.66
0.84
1.09
1.43
2.07
2.91
3.78
4.64
5.49
6.43
7.37
K = 5
A=
0.00
0.13
0.30
0.48
0.65
0.82
1.00
1.37
1.74
2.48
3.28
4.14
5.01
5.88
6.74
K = 6
A=
0.00
0.11
0.29
0.46
0.64
0.81
0.98
1.31
1.65
2.15
2.89
3.65
4.51
5.38
6.06
K = 7
A=
0.00
0.10
0.27
0.44
0.62
0.79
0.97
1.25
1.59
1.91
2.56
3.30
4.06
4.88
5.74
D
H D = 6 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
21
C
M
Y
CM
MY
CY CMY
K
Series Click- -Cerniere Hinges Ø 40 Serie MMClick for per thick portedoors di grosso spessore Technical specifications: Caratteristiche tecniche: - Depth of the cup 12,8 mm. Profondità delmetal box metallico 12.8 mm. - Cup diameter Diametro box 40 mm. - Opening Apertura 90° 90°. - Possibility door drilling from(K) 3 to Possibilità of di foratura della(K) porta da 15 3 amm. 15 mm. - Thickness of the door(T) (T)da from 40 mm. Spessore della porta 16 a16 40tomm.
Formula the thickness “H“ of the plate*da required forsecondo use 0, 8,il15, 22dimm. Formule to perdeterminate la determinazione dello spessore "H"mounting della basetta* utilizzare tipo collocrank. impiegato
T
T
H
H K
K A
A
S
Crank Collo 0
S
Crank Collo 8
H = (19 + A + K) - S
Hinge totale for lay-on doors Cerniera per la copertura del fianco
H = (11 + A + K) - S
for partial lay-on doors Cerniera per laHinge copertura parziale del fianco
T
T
K
H
K
S
A
Crank Collo 15
H
A
S
Crank Collo 22
H = (4 + A + K) - S
for partial lay-on doors Cerniera per laHinge copertura parziale del fianco
H=A+K-3
Hinge inset doors Cerniera perfor porte interne
Table totecnica determinate the minimum distance “A“ so that a door una withporta “T“ thickness can"T" open without protrusion the cabinet Tabella per determinare lo spazio minimo "A" affinchè di spessore si apra senza sporgere from dal mobile e senza and without interfering doors. interferire con eventuali with porteadjacent adiacenti
K K K K K K K K K K K L = 0.77 K L = 1.76 K
= = = = = = = = = = = = =
3 4 5 6 7 8 9 10 11 12 13 14 15
T= A= A= A= A= A= A= A= A= A= A= A= A= A=
20 0.19 0.18 0.16 0.15 0.13 0.12 0.1 0.09 0.07 0.06 0.04 0.03 0.01
21 0.37 0.35 0.34 0.32 0.31 0.29 0.27 0.26 0.24 0.23 0.21 0.2 0.18
22 0.54 0.52 0.51 0.49 0.48 0.46 0.45 0.43 0.42 0.4 0.39 0.37 0.36
23 0.71 0.7 0.68 0.67 0.65 0.64 0.62 0.61 0.59 0.58 0.56 0.55 0.53
24 0.89 0.87 0.86 0.84 0.83 0.81 0.8 0.78 0.77 0.75 0.73 0.72 0.7
25 1.06 1.05 1.03 1.01 1 0.98 0.97 0.95 0.94 0.92 0.91 0.89 0.88
26 1.23 1.22 1.2 1.19 1.17 1.16 1.14 1.13 1.11 1.1 1.08 1.07 1.05
27 1.41 1.39 1.38 1.36 1.35 1.33 1.32 1.3 1.29 1.27 1.26 1.24 1.23
28 1.58 1.57 1.55 1.54 1.52 1.51 1.49 1.47 1.46 1.44 1.43 1.41 1.4
29 2.25 1.76 1.72 1.71 1.69 1.68 1.65 1.63 1.62 1.6 1.59 1.58 1.57
30 3.19 2.53 2.04 1.98 1.92 1.85 1.84 1.82 1.81 1.79 1.78 1.76 1.75
31 4.13 3.47 2.81 2.32 2.26 2.2 2.14 2.08 2.02 1.97 1.95 1.94 1.92
32 5.07 4.41 3.75 3.12 2.62 2.54 2.48 2.42 2.36 2.3 2.24 2.11 2.09
33 6.03 5.35 4.69 4.03 3.48 2.98 2.82 2.76 2.7 2.64 2.58 2.52 2.46
34 7.02 6.29 5.63 4.97 4.35 3.85 3.35 3.1 3.04 2.98 2.92 2.86 2.8
H
D
D = 5.5 + H + Crank height Altezza Collo
* The mounting and relativi fittingsafor this hinge series are shown on pages to 30 page 33 33 di questo catalogo Le basette e gliplates accessori questa serie di cerniere sono illustrati da 30 Pag. a Pag.
22
35 8 7.23 6.57 5.91 5.25 4.71 4.21 3.71 3.39 3.33 3.27 3.21 3.15
36 8.99 8.17 7.51 6.85 6.19 5.58 5.08 4.58 4.1 3.74 3.61 3.55 3.49
37 9.97 9.15 8.45 7.79 7.13 6.48 5.95 5.45 4.95 4.51 4.15 3.89 3.83
38 10.96 10.13 9.39 8.73 8.07 7.42 6.81 6.31 5.81 5.31 4.92 4.56 4.23
39 11.94 11.12 10.33 9.67 9.01 8.36 7.7 7.18 6.68 6.18 5.68 5.33 4.97
40 12.93 12.1 11.27 10.61 9.95 9.29 8.64 8.04 7.54 7.04 6.54 6.04 5.74
C
M
Y
CM
MY
CY CMY
K
Series M Click Hinges for corner cabinets Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 110° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
HINGE FOR CABINETS WITH NEGATIVE 25° ANGLES
HINGE FOR CABINETS WITH 24°÷30° ANGLES 30°
H=4 6 K=
Opening 130° 25°
37
H=2
K= 5
24°
44 H=4 K= 5
37
HINGE FOR CABINETS WITH 45° ANGLES
HINGE FOR BLIND CORNER CABINETS 90° 45°
H=4 5 K=
°
37
90
H=4
20
45°
5 4.
K=5
H=2
5
K=
39.5
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
23
C
M
Y
CM
MY
CY CMY
K
Series M Click - Hinges Ø 26 for wood doors Technical specifications: - Depth of the metal cup 11,7 mm. - Cup diameter 26 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T
T
H K
H
K A
A
S S
Crank 0
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
T
K
H
A
S
Crank 15
H = A + K- 2
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
K = 3
A=
0.79
1.46
K = 4
A=
0.73
1.25
K = 5
A=
0.67
1.04
D
19
20
21
22
23
24
25
26
2.13
3.1
3.89
4.83
5.77
6.71
7.65
8.59
9.53
1.77
2.54
3.31
4.21
5.11
6.05
6.99
7.93
8.87
1.42
2.18
2.95
3.74
4.54
5.43
6.33
7.27
8.21
H D = 3 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
24
C
M
Y
CM
MY
CY CMY
K
Series M Click - Hinges Ø 26 for glass doors Technical specifications: - Thickness of the glass door (T) from 4 to 5 mm. - Cup diameter 26 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 5 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank. T
T
H K
H
K A A
Crank 0
S
S
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
T
K A
H S
Crank 15
H = A + K- 2
Hinge for inset doors
D
H D = 3 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
25
C
M
Y
CM
MY
CY CMY
K
Series M Click - Hinges for doors with aluminium frame, grooved profile Technical specifications: - Depth of the zamak cup 9,9 mm. - Cup drilling 28 x 7 mm. - Opening 105° - Aluminium frame (K) min. 19 to max. 25 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H
H P
P A
Crank 0
S
S
A
Crank 8
H = (P + A - 2) - S
Hinge for lay-on doors
H = (P + A - 10) - S
Hinge for partial lay-on doors
Drilling diagram Ø 4 mm. holes with 120° countersink on aluminium frame; suggested screw: 3,5 x 12 mm., item 1A05512105000, provided on request. H
A P
Crank 15
4 Ø
16.5
7
19
6.15
28 S
H = P - 17 + A
95
R4.
32.1
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors.
P P P P P P P
= = = = = = =
19 20 21 22 23 24 25
T=
19
20
21
22
23
24
25
26
A= A= A= A= A= A= A=
0.4 0.4 0.4 0.4 0.4 0.3 0.3
0.65 0.6 0.5 0.5 0.5 0.5 0.5
1 0.8 0.75 0.75 0.75 0.7 0.7
1.4 1.2 1.1 1.0 0.9 0.9 0.9
2.3 1.7 1.3 1.4 1.3 1.2 1.1
3.2 2.6 2.1 1.8 1.6 1.54 1.4
4.0 3.4 2.9 2.5 2.2 2.0 1.9
5.0 4.3 3.7 3.3 2.9 2.6 2.4
P = Width of the frame
D
H S
D = 5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
26
C
M
Y
CM
MY
CY CMY
K
Series M Click - Hinges for doors with aluminium frame, lock fixing Technical specifications: - Opening 105° - Aluminium frame (K) min. 3 to max. 6 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H H A
S
A S
Crank 0
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Assembly instructions:
H
A
S
Crank 15
H=A+K-1
Hinge for inset doors
Connecting joints:
Example of aluminium profiles: 20.8
20.5 K=4
K=6 20
17.9 23.5
28
5.6 8
5.2 5.2
2 Holes - Art. 510A31072F000 4 Holes - Art. 510A31074F000
20.5
20.5 K=4
K=4
6.7 1.2 5.2
17.9 23.5
D
H
5.6 45 5.2
S
38.3
D = 4,5 + H + Crank height
7.3
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
27
C
M
Y
CM
MY
CY CMY
K
Series M Click Hinges for angled cabinets Technical specifications: - Depth of the metal cup 11.3 mm. - Cup diameter 35 mm. - Opening 25° ÷ 90° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Hinges for corner cabinet application allowing clear access to the cabinet
Opening action of the doors
* The mounting plates and fittings for this hinge series are shown on pages 30 to page 33
28
C
M
Y
CM
MY
CY CMY
K
Rapid fixing systems Zip System The best system on the market toll free.
Insert by hand the hinge on the door.
Push to fix the hinge.
Hinge Cup Ø35 - Ø26:
Velofix System Quick system to mount the hinge on the door.
90°
Insert by hand the hinge on the door.
Turn the screw at 90° to stop.
X-pando System Hinge with 8 and 10 mm. Ø expanding dowels and screws, pre-mounted.
Insert by hand the hinge on the door.
Tighten the screws.
29
Fittings and mounting plates
Y
CM
MY
CY CMY
K
Metal cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment H
The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation
C 37
Mounting plates:
2
0
4
0
1
M
5
0
2
0
0
0
0
0
CRANK
H
14
Metal cruciform mounting plate Euro screws premounted Vertical adjustment
VARIATIONS
A
Height
Material
H=2
Steel
52.04_5.M5.02.0
H=4
Steel
52.04_5.M5.04.0
H=6
Steel
52.04_5.M5.06.0
B
G
Material
H=2
Steel
52.0416.M5.02._
Code
H=4
Steel
52.0416.M5.04._
H=6
Steel
52.0416.M5.06._
10,8
Height
Metal cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
32
H = 10
H
37
Ø5
Code
10
FINISH OR COLOUR
ARTICLE
12
FAMILY
32
Ø8
E
8,5
5
7,5
Series M Optima/Click
M
10,8
C
D 37
Zamak 52.0416.05.10._ 32
Ø 10
F
Height
Material
H=2
Steel
52.04_5.M5.02.0
Code
H=4
Steel
52.04_5.M5.04.0
H=6
Steel
52.04_5.M5.06.0
H
Metal cruciform mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
32
Steel
52.0401.M5.02.0
Code
H=4
Steel
52.0401.M5.04.0
H=6
Steel
52.0401.M5.06.0
A
Height
32
37
B
G
Code
28.5
Ø5
H=2
Zamak 52.0456.05.02._
H=4
Zamak 52.0456.05.04._
H=6
Zamak 52.0456.05.06._
H
Metal cruciform mounting plate Premounted selftapping screws Ø 4.7 mm. Vertical adjustment
Material
10
Material
H=2
12
Height
14
37
Zamak cruciform mounting plate Euro screws premounted Vertical adjustment
37
32
Ø3
Height
Material
Code
H=2
Steel
52.04G5.M5.02.0
H=4
Steel
52.04G5.M5.04.0
H=6
Steel
52.04G5.M5.06.0
Zamak cruciform mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
Height 37
7.5
H
9.2
32
Metal cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
0
Ø5
30
32
37
2
Height
Material
H=2
Steel
52.04N5.M5.02._
Code
H=4
Steel
52.04N5.M5.04._
H=6
Steel
52.04N5.M5.06._
Material
Code
28.5
H=2
Zamak 52.0451.05.02.0
H=4
Zamak 52.0451.05.04.0
H=6
Zamak 52.0451.05.06.0
C
Series M Optima/Click
Y
CM
MY
CY CMY
K
Zamak cruciform mounting plate Selftapping screw fixing Independent vertical adjustment with CAM Screws are provided on request H
Fittings and mounting plates
M
37
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
Height 37
32
Material
Material
Code
H=2
Zamak 52.L444.R5.02.0
H=4
Zamak 52.L444.R5.04.0
Code
28.5
Ø 10
H=2
Zamak 52.04Z5.05.02.0
H=4
Zamak 52.04Z5.05.04.0
H=6
Zamak 52.04Z5.05.06.0
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Independent vertical adjustment with CAM H
32
Height
37
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
Height
Material
32
Ø8
Material
Code
H=2
Zamak 52.L445.R5.02.0
H=4
Zamak 52.L445.R5.04.0
Code
28.5
Ø8
H=2
Zamak 52.04V5.05.02.0
H=4
Zamak 52.04V5.05.04.0
H=6
Zamak 52.04V5.05.06.0
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Independent vertical adjustment with CAM H
32
37
Height
37
Zamak cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment 7.5
9.2
Ø 10
0
Ø5
Material
Code
H=2
Zamak 52.L446.R5.02.0
H=4
Zamak 52.L446.R5.04.0
2
Code
H=2
Zamak 52.04U5.05.02._
H=4
Zamak 52.04U5.05.04._
H=6
Zamak 52.04U5.05.06._
Zamak cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Independent vertical adjustment with CAM H
9.2
32
28.5
Material
7.5
Height 37
32
Height
0
2
37
Zamak cruciform mounting plate Euro screws premounted Independent vertical adjustment with CAM
Code
H=2
Zamak 52.L4N5.R5.02._
H=4
Zamak 52.L4N5.R5.04._
10
12
Material
H
14
Ø 10
32
Height
A
B
Material
Code
G
37
Ø5
32
Height
H=2
Zamak 52.L447.R5.02._
H=4
Zamak 52.L447.R5.04._
31
Series M Optima/Click
Y
CM
MY
CY CMY
K
Zamak cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment 9.2
Fittings and mounting plates
M
7.5
C
0
Material
Ø5
H=2
Zamak 52.04N1.05.02._
H=4
Zamak 52.04N1.05.04._
Code
H=3
Zamak 52.0448.R5.03.0
H=5
Zamak 52.0448.R5.05.0
Zamak linear mounting plate Knock-in fixing with dowels Ø 8 mm. Independent vertical adjustment with CAM
32
Height
Ø8 32
Material
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
32
28
37.5
Height
Ø8
Material
Zamak 52.04C1.05.02.0
H=4
Zamak 52.04C1.05.04.0
H=3
Zamak 52.0449.R5.03.0
H=5
Zamak 52.0449.R5.05.0
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
32
28
37.5
Height
Ø 10
Material
H=2
Zamak 52.04D1.05.02.0
H=4
Zamak 52.04D1.05.04.0
Code
Zamak 52.0450.R5.03.0
H=5
Zamak 52.0450.R5.05.0
Zamak cruciform mounting plate Euro screws premounted Vertical adjustment 14
32
Material
H=3
Zamak cruciform mounting plate Selftapping screw fixing Vertical adjustment Screws are provided on request
32
37.5
32
28
Height
Material
Code
H=2
Zamak 52.0422.05.02.0
H=4
Zamak 52.0422.05.04.0
37.5
Ø5
Height
10
Height
32
Code
32
Ø 10
28
Code
H=2
Code
Zamak linear mounting plate Knock-in fixing with dowels Ø 10 mm. Independent vertical adjustment with CAM
21
Height Materiale Codice
32
Height
21
37.5
12
21
28
32
Zamak linear mounting plate Selftapping screw fixing 3,5x15 mm. Independent vertical adjustment with CAM Screws are provided on request (cod. 1A03050418000)
2
A
B
Material
Code
G
H=2
Zamak 52.0421.05.02._
H=4
Zamak 52.0421.05.04._
C
Series M Optima/Click Fittings and mounting plates
M
Y
CM
MY
CY CMY
K
Ø 35 mm. cover
Material
Code
Nylon
Zamak mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
Height
Material
White RAL 9010 Brown RAL 8016 Grey RAL 7004 Painted matt aluminium
Code
H=2
Zamak 52.0432.05.02.0
H=5
Zamak 52.0432.05.05.0
Selftapping screws with Pozi drive head, nickel for hinge and mounting plate fixing
Ø
Material
Lenght
4
Steel
12.5
1A03503415000
Code
4
Steel
15.5
1A03503425000
L
32
12.5
A1 = A2 = C6 = 0I =
5307C3_ _00000
Oval face plate for glass door hinge
Colour
Code
Bright chrome
51.0150.05. 01R.00
Matt chrome
51.0150.0G.01R.00
Brass plated
51.0150.04. 01R.00
Black painted
51.0150.08. 01R.00
Black RAL 9005
51.0150.0T. 01R.00
White painted
51.0150.0A.01R.00
White RAL 9016
51.0150.01. 01R.00
Metallized bright chrome
51.0150.0K. 01R.00
Metallized bright gold
51.0150.0H.01R.00
Matt chrome painted
51.0150.0J. 01R.00
Matt nickel
51.0150.06. 01R.00
Colour
Ø
Euro screws with Pozi drive head, nickel for mounting plate fixing
Code
Bright chrome
Ø
Material
Lenght
6.3
Steel
10
6.3
Steel
12
3A07502925000
6.3
Steel
14
3A07502915000
Drilling distance
Material
48 - 45
Steel
510C000500000
52
Steel
510C000500B00
51.0150.05. 01D.00
Matt chrome
51.0150.0G.01D.00
Brass plated
51.0150.04. 01D.00
Black painted
51.0150.08. 01D.00
Black RAL 9005
51.0150.0T. 01D.00
White painted
51.0150.0A.01D.00
White RAL 9016
51.0150.01. 01D.00
Metallized bright chrome
51.0150.0K. 01D.00
Metallized bright gold
51.0150.0H.01D.00
Matt chrome painted
51.0150.0J. 01D.00
Matt nickel
51.0150.06. 01D.00
Code
3A07502935000
L
Round face plate for glass door hinge
Ø
Steel box cover cup
Code
Plastic or Steel symmetric hinge arm cover Material
Steel
Material
Plastic
Material
Steel
Code
510M000500000
Code
510M000100000
Code
510X00010000N
33
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On Reliability, simplicity of use and wide range of variations and applications are the characteristics behind this success. The Slide-on series uses the slide-on system allowing fast and easy assembly combined with strength and accuracy of adjustment.
Simple fixings Rapid and reliable adjustments An answer for all customer requirements
Adjusting System
Independent side adjustment
Front adjustment
Vertical adjustment
Acting on the "A" screw it is possible to change the amount of the door covering on the side of the cabinet.
Acting on the "B" screw it is possible to adjust the distance between the side of the cabinet and the door.
Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically.
34
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On
Mounting System
A
B
C
Place the rear part of the hinge on the front side of the mounting plate.
Let the hinge slide on the mounting plate untill it stops.
Tighten the connecting screw.
35
C
Series M Slide-On
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 48 X 6 mm METAL SCREWS FIXING *
METAL DOWELS FIXING
Ø35
Ø10
11
11
12
The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation
METAL - FIXING WITH EURO SCREWS PREMOUNTED
Ø35
Ø35
48
48
Ø
Hinges: 48
1
5
0
5
0
8
0
0
0
0
0 -ITALY-
-ITALY-
-ITALY-
VARIATIONS
HINGES OPENING
110° PAG 38 HINGES OPENING
125° PAG 39 HINGES OPENING
175° PAG 40 HINGES Ø 35 FOR THICK DOORS
Crank 0
51.MS15.05.00.0
51.MS16.05.00.*
51.MS16.05.00.M
5
Crank 4
51.MS15.05.04.0
51.MS16.05.04.*
51.MS16.05.04.M
5
Crank 8
51.MS15.05.08.0
51.MS16.05.08.*
51.MS16.05.08.M
5
Crank 15
51.MS15.05.15.0
51.MS16.05.15.*
51.MS16.05.15.M
5
Crank 0
51.MK15.M5.00.0
51.MK16.M5.00.*
51.MK16.M5.00.M
5
Crank 8
51.MK15.M5.08.0
51.MK16.M5.08.*
51.MK16.M5.08.M
5
Crank 0
51.MW15.S5.00.0
51.MW16.S5.00.*
51.MW16.S5.00.M
5
Crank 8
51.MW15.M5.08.0
51.MW16.M5.08.*
51.MW16.M5.08.M
5
Crank 0
51.MT15.05.00.0
51.MT16.05.00.*
51.MT16.05.00.M
5
Crank 8
51.MT15.05.08.0
51.MT16.05.08.*
51.MT16.05.08.M
5
Crank 15
51.MT15.05.15.0
51.MT16.05.15.*
51.MT16.05.15.M
5
51.MK85.M5.25.0
51.MK86.M5.25.*
51.MK86.M5.25.M
5
Crank 24°÷30°
51.MS85.05.30.0
51.MS86.05.30.*
51.MS86.05.30.M
5
Crank 45°
51.MS85.M5.45.0
51.MS86.M5.45.*
51.MS86.M5.45.M
5
Crank 90°
51.MS85.05.90.0
51.MS86.05.90.*
51.MS86.05.90.M
5
51.MS83.05.35.0
51.MS84.05.35.*
51.MS84.05.35.M
5
90° PAG 41
K
CRANK
K
FINISH OR COLOUR
ARTICLE
K
FAMILY
K
S
6
M
6
1
6
5
Crank 0
HINGES Ø 40 FOR THICK DOORS
Crank 8
90°
Crank 15
PAG 42
Crank 22 Crank
HINGES FOR CORNER CABINETS
110° PAG 43 HINGES Ø 26 FOR WOOD AND/OR GLASS DOORS
25°
Crank 0 Crank 8
90° WOOD
PAG 44
GLASS
PAG 45
HINGES FOR DOORS WITH ALUMINIUM FRAME
Crank 15
Crank 0 Crank 8
105° Grooved profile
PAG 46
Lock fixing
PAG 47
Crank 15
PIE CORNER HINGES FOR DOORS WITH SPECIAL OPENING
PAG 48 FLAP DOORS
Right:
51.MN57.R5.00000 Left:
PAG 49
36
51.MN57.L5.00000 * Available with premounted selftapping screws
* 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
C
M
Y
CM
MY
CY CMY
K
CUP HOLE DISTANCE 45 X 9.5 mm METAL - FIXING WITH VELOFIX SYSTEM
METAL SCREWS FIXING *
METAL DOWELS FIXING
METAL - FIXING WITH EURO SCREWS PREMOUNTED
METAL - FIXING WITH VELOFIX SYSTEM
METAL SCREWS FIXING *
11
Ø10
Ø35
Ø35
45
52 5.5 -ITALY-
K
9.5
9.5 -ITALY-
-ITALY-
Ø1
K
45
-ITALY-
-ITALY-
K
-ITALY-
K
45
K
6
Ø35
K
45
Ø35
9.5
48
Ø8
K
Ø35
9.5
Ø35
6
Ø10
11
11
11
12
ED
M
51.MS18.05.00.V
51.MS15.05.00.C
51.MS16.05.00.S
51.MS16.05.00.N
51.MS18.05.00.U
51.MS15.05.00.B
5
M
51.MS18.05.04.V
51.MS15.05.04.C
51.MS16.05.04.S
51.MS16.05.04.N
51.MS18.05.04.U
51.MS15.05.04.B
5
M
51.MS18.05.08.V
51.MS15.05.08.C
51.MS16.05.08.S
51.MS16.05.08.N
51.MS18.05.08.U
51.MS15.05.08.B
5
M
51.MS18.05.15.V
51.MS15.05.15.C
51.MS16.05.15.S
51.MS16.05.15.N
51.MS18.05.15.U
51.MS15.05.15.B
5
M
51.MK18.M5.00.V
51.MK15.M5.00.C
51.MK16.M5.00.S
51.MK16.M5.00.N
51.MK18.M5.00.U
51.MK15.M5.00.B
5
M
51.MK18.M5.08.V
51.MK15.M5.08.C
51.MK16.M5.08.S
51.MK16.M5.08.N
51.MK18.M5.08.U
51.MK15.M5.08.B
5
M
51.MW18.S5.00.V
51.MW15.S5.00.C
51.MW16.S5.00.S
51.MW16.S5.00.N
51.MW18.S5.00.U
51.MW15.S5.00.B
5
M
51.MW18.M5.08.V
51.MW15.M5.08.C
51.MW16.M5.08.S
51.MW16.M5.08.N
51.MW18.M5.08.U
51.MW15.M5.08.B
5
M
51.MT18.05.00.V
51.MT15.05.00.C
51.MT16.05.00.S
51.MT16.05.00.N
51.MT18.05.00.U
51.MT15.05.00.B
5
M
51.MT18.05.08.V
51.MT15.05.08.C
51.MT16.05.08.S
51.MT16.05.08.N
51.MT18.05.08.U
51.MT15.05.08.B
5
M
51.MT18.05.15.V
51.MT15.05.15.C
51.MT16.05.15.S
51.MT16.05.15.N
51.MT18.05.15.U
51.MT15.05.15.B
5
M
51.MK88.M5.25.V
51.MK85.M5.25.C
51.MK86.M5.25.S
51.MK86.M5.25.N
51.MK88.M5.25.U
51.MK85.M5.25.B
5
M
51.MS88.05.30.V
51.MS85.05.30.C
51.MS86.05.30.S
51.MS86.05.30.N
51.MS88.05.30.U
51.MS85.05.30.B
5
M
51.MS88.M5.45.V
51.MS85.M5.45.C
51.MS86.M5.45.S
51.MS86.M5.45.N
51.MS88.M5.45.U
51.MS85.M5.45.B
5
M
51.MS88.05.90.V
51.MS85.05.90.C
51.MS86.05.90.S
51.MS86.05.90.N
51.MS88.05.90.U
51.MS85.05.90.B
5
M
51.MS88.05.35.V
51.MS83.05.35.C
51.MS84.05.35.S
51.MS84.05.35.N
51.MS88.05.35.U
51.MS83.05.35.B
5
* Available with premounted selftapping screws
* Available with premounted selftapping screws
C
MY
METAL SCREWS FIXING
5
51.MS16.05.00.B
51.MS16.05.00.E
51.MS18.05.00.Z
B
51.MS16.05.04.B
51.MS16.05.04.E
51.MS18.05.04.Z
B
51.MS16.05.08.B
51.MS16.05.08.E
51.MS18.05.08.Z
B
51.MS16.05.15.B
51.MS16.05.15.E
51.MS18.05.15.Z
B
51.MK16.M5.00.B
51.MK16.M5.00.E
51.MK18.M5.00.Z
B
51.MK16.M5.08.B
51.MK16.M5.08.E
51.MK18.M5.08.Z
B
51.MW16.S5.00.B
51.MW16.S5.00.E
51.MW18.S5.00.Z
B
51.MW16.M5.08.B
51.MW16.M5.08.E
51.MW18.M5.08.Z
B
51.MT16.05.00.B
51.MT16.05.00.E
51.MT18.05.00.Z
B
51.MT16.05.08.B
51.MT16.05.08.E
51.MT18.05.08.Z
B
51.MT16.05.15.B
51.MT16.05.15.E
51.MT18.05.15.Z
B
51.MK86.M5.25.B
51.MK86.M5.25.E
51.MK88.M5.25.Z
B
51.MS86.05.30.B
51.MS86.05.30.E
51.MS88.05.30.Z
B
51.MS86.M5.45.B
51.MS86.M5.45.E
51.MS88.M5.45.Z
B
51.MS86.05.90.B
51.MS86.05.90.E
51.MS88.05.90.Z
Ø26
-ITALY-
K
K
K
K
B
Ø40 52
-ITALY-
-ITALY-
-ITALY-
Ø10
51.MN45.05.00.0
51.MN46.05.00.0
51.MN45.05.08.0
51.MN46.05.08.0
51.MN45.05.15.0
51.MN46.05.15.0
51.MN45.05.22.0
51.MN46.05.22.0
K
52
7.5
Ø40
52 5.5
5.5
NYLON FOR GLASS DOORS
11 Ø35
7.5
52
K
K
METAL DOWELS FIXING
11 52
Ø10
5.5
Ø35
-ITALY-
CY CMY
12.8
METAL - FIXING WITH VELOFIX SYSTEM
12 11
Ø35
5.5
Ø10
CM
12.8
METAL - FIXING WITH EURO SCREWS PREMOUNTED
Y
CUP HOLE D. 52 X 7.5 mm
CUP HOLE DISTANCE 52 X 5.5 mm METAL DOWELS FIXING
M
51.MG11.21.00.0 51.MG11.21.08.0 51.MG11.21.15.0
B
51.MS84.05.35.B
51.MS84.05.35.E
51.MS88.05.35.Z
*1 *3
= White = Black
C
M
Y
CM
MY
CY CMY
CUP HOLE DISTANCE 38 X 8 mm
ALUMINIUM LOCK FIXING
4
9
Ø
16.5
28 0 19 -+ 0.15
7
12
11 Ø10
Ø26
FIXING TO GROOVED PROFILE
11.65
METAL - FIXING WITH EURO SCREWS PREMOUNTED 11.65
METAL DOWELS FIXING 11.65
METAL SCREWS FIXING *
K
Ø26
Ø26
3.6 2.5 38
38
+ 0.
8
32.1
51.MG15.05.00.0
51.MG16.05.00.*
51.MG16.05.00.M
51.MG15.05.08.0
51.MG16.05.08.*
51.MG16.05.08.M
51.MG15.05.15.0
51.MG16.05.15.*
51.MG16.05.15.M
* Available with premounted selftapping screws
* 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
05
- 0 95 R4.
12.7
K
8 K
K
8
6.15
38
+ 0.1 - 0
51.MS41.05.00.000
51.MS31.05.00.000
51.MS41.05.08.000
51.MS31.05.08.000
51.MS41.05.15.000
51.MS31.05.15.000
37
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Opening 110° Technical specifications: - Depth of the metal cup 11.3 mm. - Cup diameter 35 mm. - Opening 110° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 4, 8, 15 mm. crank.
T
T
H K
H K
A
Crank 0
A
S
S
Crank 4
H = (14 + A + K) - S
Hinge for lay-on doors
H = (10 + A + K) - S
Hinge for partial lay-on doors
T
T
H K
K A
H
A
S S
Crank 8
Crank 15
H = (6 + A + K) - S
Hinge for partial lay-on doors
H=A+K-1
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.57
0.74
1.11
1.45
1.81
2.38
3.10
3.92
4.71
6.69
6.51
K = 4
A=
0.55
0.72
1.05
1.39
1.75
2.25
2.87
3.60
4.36
5.73
6.03
K = 5
A=
0.53
0.70
0.99
1.33
1.67
2.12
2.64
3.28
4.01
4.77
5.55
K = 6
A=
0.51
0.69
0.93
1.27
1.61
1.99
2.49
3.05
3.69
4.41
5.18
K = 7
A=
0.50
0.67
0.87
1.21
1.55
1.89
2.35
2.85
3.46
4.10
4.82
H D
D = 4.5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
38
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Opening 125° Technical specifications: - Depth of the metal cup 12,3 mm. - Cup diameter 35 mm. - Opening 125° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8 mm. crank.
T
T
H
H K K
A
Crank 0
A S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors.
D
T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.92
1.39
1.89
2.39
2.96
3.61
4.25
4.89
5.53
6.18
6.82
K = 4
A=
0.86
1.25
1.75
2.25
2.75
3.37
4.01
4.66
5.30
5.94
6.59
K = 5
A=
0.80
1.11
1.61
2.11
2.54
3.13
3.77
4.43
5.07
5.70
6.36
H D = 4 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
39
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Opening 175° Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 165° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8 mm. crank.
T
T
H K
H K
A
Crank 0
A
S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.00
0.00
0.00
0.00
0.00
0.00
0.2
0.54
6.78
8.12
13.55
K = 4
A=
0.00
0.00
0.00
0.00
0.00
0.05
0.27
3.48
5.86
7.24
12.55
K = 5
A=
0.00
0.00
0.00
0.00
0.00
0.06
0.29
3.55
4.89
6.24
11.55
K = 6
A=
0.00
0.00
0.00
0.00
0.00
0.06
0.39
2.97
3.9
5.24
10.55
K = 7
A=
0.00
0.00
0.00
0.00
0.00
0.07
1.2
2.2
3.16
4.24
9.55
H D
H D=9-H-K
D
K
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
40
D = 1 + H + Crank height
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Hinges Ø 35 for thick doors Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 95° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 30 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T
T
H
H K K
A
Crank 0
A S
S
Crank 8
H = (14.5 + A + K) - S
H = (6.5 + A + K) - S
Hinge for partial lay-on doors
Hinge for lay-on doors
T
K
H
A
S
Crank 15
H = A + K - 0.5
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
K = 3
A=
0.00
0.16
0.33
0.50
0.68
0.85
1.15
1.67
2.54
3.41
4.27
5.21
6.15
7.08
8.02
K = 4
A=
0.00
0.14
0.31
0.49
0.66
0.84
1.09
1.43
2.07
2.91
3.78
4.64
5.49
6.43
7.37
K = 5
A=
0.00
0.13
0.30
0.48
0.65
0.82
1.00
1.37
1.74
2.48
3.28
4.14
5.01
5.88
6.74
K = 6
A=
0.00
0.11
0.29
0.46
0.64
0.81
0.98
1.31
1.65
2.15
2.89
3.65
4.51
5.38
6.06
K = 7
A=
0.00
0.10
0.27
0.44
0.62
0.79
0.97
1.25
1.59
1.91
2.56
3.30
4.06
4.88
5.74
H D D = 6 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
41
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Hinges Ø 40 for thick doors Technical specifications: - Depth of the metal cup 12,8 mm. - Cup diameter 40 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 15 mm. - Thickness of the door (T) from 16 to 40 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15, 22 mm. crank.
T
T
H
H K
K A
A
S
Crank 0
S
Crank 8
H = (19 + A + K) - S
Hinge for lay-on doors
H = (11 + A + K) - S
Hinge for partial lay-on doors
T
T
H
K
H
A
S
A
Crank 15
K
S
Crank 22
H = (4 + A + K) - S
Hinge for partial lay-on doors
H=A+K-3
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors.
K K K K K K K K K K K L = 0.77 K L = 1.76 K
= = = = = = = = = = = = =
3 4 5 6 7 8 9 10 11 12 13 14 15
T= A= A= A= A= A= A= A= A= A= A= A= A= A=
20 0.19 0.18 0.16 0.15 0.13 0.12 0.1 0.09 0.07 0.06 0.04 0.03 0.01
21 0.37 0.35 0.34 0.32 0.31 0.29 0.27 0.26 0.24 0.23 0.21 0.2 0.18
22 0.54 0.52 0.51 0.49 0.48 0.46 0.45 0.43 0.42 0.4 0.39 0.37 0.36
23 0.71 0.7 0.68 0.67 0.65 0.64 0.62 0.61 0.59 0.58 0.56 0.55 0.53
24 0.89 0.87 0.86 0.84 0.83 0.81 0.8 0.78 0.77 0.75 0.73 0.72 0.7
25 1.06 1.05 1.03 1.01 1 0.98 0.97 0.95 0.94 0.92 0.91 0.89 0.88
26 1.23 1.22 1.2 1.19 1.17 1.16 1.14 1.13 1.11 1.1 1.08 1.07 1.05
27 1.41 1.39 1.38 1.36 1.35 1.33 1.32 1.3 1.29 1.27 1.26 1.24 1.23
28 1.58 1.57 1.55 1.54 1.52 1.51 1.49 1.47 1.46 1.44 1.43 1.41 1.4
29 2.25 1.76 1.72 1.71 1.69 1.68 1.65 1.63 1.62 1.6 1.59 1.58 1.57
30 3.19 2.53 2.04 1.98 1.92 1.85 1.84 1.82 1.81 1.79 1.78 1.76 1.75
H D D = 5.5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
42
31 4.13 3.47 2.81 2.32 2.26 2.2 2.14 2.08 2.02 1.97 1.95 1.94 1.92
32 5.07 4.41 3.75 3.12 2.62 2.54 2.48 2.42 2.36 2.3 2.24 2.11 2.09
33 6.03 5.35 4.69 4.03 3.48 2.98 2.82 2.76 2.7 2.64 2.58 2.52 2.46
34 7.02 6.29 5.63 4.97 4.35 3.85 3.35 3.1 3.04 2.98 2.92 2.86 2.8
35 8 7.23 6.57 5.91 5.25 4.71 4.21 3.71 3.39 3.33 3.27 3.21 3.15
36 8.99 8.17 7.51 6.85 6.19 5.58 5.08 4.58 4.1 3.74 3.61 3.55 3.49
37 9.97 9.15 8.45 7.79 7.13 6.48 5.95 5.45 4.95 4.51 4.15 3.89 3.83
38 10.96 10.13 9.39 8.73 8.07 7.42 6.81 6.31 5.81 5.31 4.92 4.56 4.23
39 11.94 11.12 10.33 9.67 9.01 8.36 7.7 7.18 6.68 6.18 5.68 5.33 4.97
40 12.93 12.1 11.27 10.61 9.95 9.29 8.64 8.04 7.54 7.04 6.54 6.04 5.74
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On Hinges for corner cabinets Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Opening 110° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
HINGE FOR CABINETS WITH NEGATIVE 25° ANGLES
HINGE FOR CABINETS WITH 24°÷30° ANGLES 30°
H=4 6 K=
Opening 130° 25°
37
H=2
K= 5
24°
44 H=4 K= 5
37
HINGE FOR CABINETS WITH 45° ANGLES
HINGE FOR BLIND CORNER CABINETS 90° 45°
H=4
5 K=
°
37
90
H=4
45°
20 5 4.
K=5 H=2
5 K=
39.5
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
43
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Hinges Ø 26 for wood doors Technical specifications: - Depth of the metal cup 11,7 mm. - Cup diameter 26 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T
T
H H K
K A
A
S S
Crank 0
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
T
K
H
A
S
Crank 15
H = A + K- 2
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
26
K = 3
A=
0.79
1.46
K = 4
A=
0.73
1.25
2.13
3.1
3.89
4.83
5.77
6.71
7.65
8.59
9.53
1.77
2.54
3.31
4.21
5.11
6.05
6.99
7.93
8.87
K = 5
A=
0.67
1.04
1.42
2.18
2.95
3.74
4.54
5.43
6.33
7.27
8.21
H
D
D = 3 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
44
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Hinges Ø 26 for glass doors Technical specifications: - Thickness of the glass door (T) from 4 to 5 mm. - Cup diameter 26 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 5 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank. T
T
H K
H K A
A
Crank 0
S
S
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
T
K A
H
S
Crank 15
H = A + K- 2
Hinge for inset doors
D
H D = 3 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
45
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On - Hinges for doors with aluminium frame, grooved profile Technical specifications: - Depth of the zamak cup 9,9 mm. - Cup drilling box 28 x 7 mm. - Opening 105°. - Aluminium frame (K) min. 19 to max 25 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H
H P
P A
Crank 0
S
S
A
Crank 8
H = (P + A - 2) - S
Hinge for lay-on doors
H = (P + A - 10) - S
Hinge for partial lay-on doors
Drilling diagram Ø 4 mm. holes with 120° countersink on aluminium frame; suggested screw: 3,5 x 12 mm., item 1A05512105000, provided on request. H
A P
Crank 15
4 Ø
16.5
7
19
6.15
28 S
H = P - 17 + A
95
R4.
32.1
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors.
P P P P P P P
= = = = = = =
19 20 21 22 23 24 25
T=
19
20
21
22
23
24
25
26
A= A= A= A= A= A= A=
0.4 0.4 0.4 0.4 0.4 0.3 0.3
0.65 0.6 0.5 0.5 0.5 0.5 0.5
1 0.8 0.75 0.75 0.75 0.7 0.7
1.4 1.2 1.1 1.0 0.9 0.9 0.9
2.3 1.7 1.3 1.4 1.3 1.2 1.1
3.2 2.6 2.1 1.8 1.6 1.54 1.4
4.0 3.4 2.9 2.5 2.2 2.0 1.9
5.0 4.3 3.7 3.3 2.9 2.6 2.4
P = Width of the frame
H
D
S
D = 5 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
46
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On- Hinges for doors with aluminium frame, lock fixing Technical specifications: - Opening 105° - Aluminium frame (k) min. 3 to max. 6 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H H A
Crank 0
A
S
S
Crank 8
H = (14 + A + K) - S
Hinge for lay-on doors
H = (6 + A + K) - S
Hinge for partial lay-on doors
Assembly instructions:
H
A
S
Crank 15
H=A+K-1
Hinge for inset doors
Connecting joints:
Example of aluminium profiles: 20.8
20.5 K=4
K=6 20
17.9 23.5
28
5.6 8
5.2 5.2
2 Holes - Art. 510A31072F000 4 Holes - Art. 510A31074F000
20.5
20.5 K=4
K=4
6.7 1.2 5.2
17.9 23.5
D
H
5.6 45 5.2
S
38.3
D = 4,5 + H + Crank height
7.3
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
47
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On Hinges for angled cabinets Technical specifications: - Depth of the metal cup 11.3 mm. - Cup diameter 35 mm. - Opening 25° ÷ 90° - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
Hinges for corner cabinet application allowing clear access to the cabinet
Opening action of the doors
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
48
C
M
Y
CM
MY
CY CMY
K
Series M Slide-On Hinges MN 95° for flap doors Technical specifications: - Depth of the metal cup 11,3 mm. - Cup diameter 35 mm. - Possibility of door drilling (K) from 3 to 7 mm. - Thickness of the door (T) from 16 to 26 mm.
24
11.3
Mounting diagram: Ø 35 21.5
T
X
32 Ø 35
C
32
11 16.5
K
S
A B
K mm
C mm
Mounting Plates Height
A mm
B mm
3
4.5
4
5.5
2
2.5
20
5
6.5 7.5 8.5
4
4.5
22
6
6
6.5
24
7
* The mounting plates and fittings for this hinge series are shown on pages 51 to page 56
49
C
M
Y
CM
MY
CY CMY
K
Rapid fixing systems Zip System The best system on the market toll free.
Insert by hand the hinge on the door.
Push to fix the hinge.
Hinge Cup Ø35 - Ø26:
Velofix System Quick system to mount the hinge on the door.
90°
Insert by hand the hinge on the door.
Turn the screw at 90° to stop.
X-pando System Hinge with 8 and 10 mm. Ø expanding dowels and screws, pre-mounted.
Insert by hand the hinge on the door.
50
Tighten the screws.
MY
CY CMY
K
Metal cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation Mounting plates:
1
M
5
FINISH OR COLOUR
ARTICLE
0
2
0
0
CRANK
H
C
Height
Ø5
32
37
0
H
0 Ø8
VARIATIONS
14
Metal cruciform mounting plate Euro screws premounted Vertical adjustment
0
32
0
Material Code
H=0
Steel
52.C2_5.M5.00.1
H=2
Steel
52.02_5.M5.02.1
H=4
Steel
52.02_5.M5.04.1
H=6
Steel
52.02_5.M5.06.1
D
H
Metal cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
Material Code
H=0
Steel
52.C216.M5.00._
H=2
Steel
52.0216.M5.02._
H=4
Steel
52.0216.M5.04._
H=6
Steel
52.0216.M5.06._
D
F
H
4
Height
Height 37
Ø 10
32
FAMILY
0
E
10
2
C
37
12
5
7,5
CM
8,5
Fittings and mounting plates
Y
10,8
Series M Slide-On
M
10,8
C
Material Code
H=0
Steel
52.C2_5.M5.00.1
H=2
Steel
52.02_5.M5.02.1
H=4
Steel
52.02_5.M5.04.1
H=6
Steel
52.02_5.M5.06.1
Height
32
37
Material Code
H=0
Steel
52.C201.M5.00.1
H=2
Steel
52.0201.M5.02.1
H=4
Steel
52.0201.M5.04.1
H=6
Steel
52.0201.M5.06.1
Metal cruciform mounting plate Euro screw fixing Screws are provided on request
H
H
Metal cruciform mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
Height
Ø5
Material Code
H=0
Steel
52.C220.M5.00.1
H=2
Steel
52.0220.M5.02.1
H=4
Steel
52.0220.M5.04.1
H=6
Steel
52.0220.M5.06.1
H
Metal cruciform mounting plate Premounted selftapping screws Ø 4.7 mm. Vertical adjustment
32
37
Height
H=0
Steel
52.C2G5.M5.00.1
H=2
Steel
52.02G5.M5.02.1
H=4
Steel
52.02G5.M5.04.1
H=6
Steel
52.02G5.M5.06.1
Metal cruciform mounting plate Selftapping screw fixing Screws are provided on request
H
Ø3
32
37
Material Code
Height
H
1
Height
Ø5
32
37
7.5
9.2
Metal cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
32
37
Material Code
H=0
Steel
52.C219.M5.00.1
H=2
Steel
52.0219.M5.02.1
H=4
Steel
52.0219.M5.04.1
H=6
Steel
52.0219.M5.06.1
3
Material Code
H=0
Steel
52.C2N5.M5.00._
H=2
Steel
52.02N5.M5.02._
H=4
Steel
52.02N5.M5.04._
H=6
Steel
52.02N5.M5.06._
51
C
Series M Slide-On Fittings and mounting plates
M
Y
CM
MY
CY CMY
K
Zamak cruciform mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
37
Height
Material Code
H=0
Zamak
52.0251.05.00.1
H=2
Zamak
52.0251.05.02.1
H=4
Zamak
52.0251.05.04.1
H=6
Zamak
52.0251.05.06.1
H
32
Zamak cruciform mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
28.5
Height
Material Code
H= 2
Zamak
52.0201.05.02.1
H = 10
Zamak
52.0201.05.10.1
H 32
37
C
Height
Material
D
Material Code
H=0
Zamak
52.0204.05.00.1
H=2
Zamak
52.0204.05.02.1
H=4
Zamak
52.0204.05.04.1
H=6
Zamak
52.0204.05.06.1
Code
H= 2
Zamak
52.0216.05.02._
Zamak
52.0216.05.10._
H = 24
Zamak
52.0216.05.24._
Also available with dowel fixing
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Independent vertical adjustment
37
32
28.5
Ø8
Height
Material Code
H=0
Zamak
52.0205.05.00.1
H=2
Zamak
52.0205.05.02.1
H=4
Zamak
52.0205.05.04.1
H=6
Zamak
52.0205.05.06.1
10
12
Zamak cruciform mounting plate with 30° inclination Euro screws premounted Vertical adjustment 14
Height
H
H = 10
C
28.5
32
10
12
Zamak cruciform mounting plate Euro screws premounted Vertical adjustment
Zamak cruciform mounting plate Selftapping screw fixing. Independent vertical adjustment Screws are provided on request
37
14
32
37
D
H
28
32
Ø5
Degree
Material
30°
Zamak
Code
52.0266.05.24._
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Independent vertical adjustment
37
32
Zamak mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
28.5
Height
Material Code
H=0
Zamak
52.0206.05.00.1
H=2
Zamak
52.0206.05.02.1
H=4
Zamak
52.0206.05.04.1
H=6
Zamak
52.0206.05.06.1
Ø 10
32
12.5
52
Height
Material Code
H=2
Zamak
52.0232.05.02.1
H=5
Zamak
52.0232.05.05.1
C
Series M Slide-On Fittings and mounting plates
Y
CM
MY
CY CMY
K
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
28.5
32
10
Ø8
37
28.5
32
Ø5
D
Material Code
H=0
Zamak
52.02V5.05.00.1
H=2
Zamak
52.02V5.05.02.1
H=4
Zamak
52.02V5.05.04.1
H=6
Zamak
52.02V5.05.06.1
H
Height
Material Code
H=0
Zamak
52.0277.05.00._
H=2
Zamak
52.0277.05.02._
H=4
Zamak
52.0277.05.04._
H=6
Zamak
52.0277.05.06._
Zamak cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
7.5
C
Height
9.2
12
37
14
Zamak cruciform mounting plate Euro screws premounted Independent vertical adjustment
M
1
28.5
32
10
12
37
14
Zamak cruciform mounting plate Euro screws premounted Vertical adjustment
Ø5 C
32
37
28.5
Ø5
D
32
28.5
Height
Material Code
H=0
Zamak
52.02U5.05.00._
H=2
Zamak
52.02U5.05.02._
H=4
Zamak
52.02U5.05.04._
H=6
Zamak
52.02U5.05.06._
H
Height
Material Code
H=0
Zamak
52.0256.05.00._
H=2
Zamak
52.0256.05.02._
H=4
Zamak
52.0256.05.04._
H=6
Zamak
52.0256.05.06._
Zamak linear mounting plate Knock-in fixing with dowels Ø 8 mm. Independent vertical adjustment
16.5
Zamak cruciform mounting plate Selftapping screw fixing Independent vertical adjustment with CAM Screws are provided on request
37
3
32
18
Ø8
Height
Material Code
H=2
Zamak
52.0209.05.02.1
32
Height
Material Code
H=0
Zamak
52.0204.R5.00.1
H=2
Zamak
52.0204.R5.02.1
H=4
Zamak
52.0204.R5.04.1
H=6
Zamak
52.0204.R5.06.1
Zamak linear mounting plate Knock-in fixing with dowels Ø 10 mm. Independent vertical adjustment
16.5
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
32
Ø 10
18
Height
Material Code
H=2
Zamak
52.0210.05.02.1
32
28.5
32
37
Ø 10
Height
Material Code
H=0
Zamak
52.02Z5.05.00.1
H=2
Zamak
52.02Z5.05.02.1
H=4
Zamak
52.02Z5.05.04.1
H=6
Zamak
52.02Z5.05.06.1
53
C
Series M Slide-On
Y
CM
MY
CY CMY
K
Metal cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
H
Fittings and mounting plates
M
Metal cruciform mounting plate Euro screws premounted Vertical adjustment
28
32
H=4
Steel
Code
52.02D1.M5.04.1
10
12
Material
H
14
Ø 10
Height
C
D
H
Steel
Code
52.0221.M5.04._
Zamak cruciform mounting plate Euro screws premounted Independent vertical adjustment
C
Metal cruciform mounting plate Premounted selftapping screws Ø 4.7 mm. Vertical adjustment
37.5
Ø5
D
H
Height
Material Code
H=2
Zamak
52.0297.05.02._
H=4
Zamak
52.0297.05.04._
H
32
28
10
Material
H=4
12
Height
14
Ø5
32
28
Ø3
32
28
Height
Material
H=4
Steel
Code
52.02G1.M5.04.1
Metal cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Independent vertical adjustment
37.5
Material Code
H=2
Zamak
52.0226.05.02.1
H=4
Zamak
52.0226.05.04.1
7.5
Ø 10
Height
H
9.2
32
28
1
3
Ø5
32
28
Height
Material
H=4
Steel
Code
52.02N1.M5.04._
Metal cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
H
32
28
54
32
28
Ø8
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Independent vertical adjustment
Height
Material
H=4
Steel
Code
52.02C1.M5.04.1
37.5
Ø8
Height
Material Code
H=2
Zamak
52.0225.05.02.1
H=4
Zamak
52.0225.05.04.1
C
Series M Slide-On Fittings and mounting plates
M
Y
CM
MY
CY CMY
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
28
Height
Material Code
H=2
Zamak
52.0224.05.02.1
H=4
Zamak
52.0224.05.04.1
28
32
Height
Material Code
H=2
Zamak
52.0222.05.02.1
H=4
Zamak
52.0222.05.04.1
32 32
37.5
Round face plate for glass door hinge
32
37.5
Ø5
10
12
14 C
D
Height
Material Code
H=2
Zamak
52.0221.05.02._
H=4
Zamak
52.0221.05.04._
7.5
9.2 1
32
H=2
Zamak
52.02C1.05.02.1
H=4
Zamak
52.02C1.05.04.1
37.5
Ø5
37.5
Height
Material Code
H=2
Zamak
52.02D1.05.02.1
H=4
Zamak
52.02D1.05.04.1
Ø 10
Colour
Bright chrome
Code
51.0150.05. 01R.00
Matt chrome
51.0150.0G.01R.00
Brass plated
51.0150.04. 01R.00
Black painted
51.0150.08. 01R.00
Black RAL 9005
51.0150.0T. 01R.00
White painted
51.0150.0A.01R.00
White RAL 9016
51.0150.01. 01R.00
Metallized bright chrome
51.0150.0K. 01R.00
Metallized bright gold
51.0150.0H.01R.00
Matt chrome painted
51.0150.0J. 01R.00
Matt nickel
51.0150.06. 01R.00
H
Zamak cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
28
Material Code
Zamak cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
Zamak cruciform mounting plate Euro screws premounted Vertical adjustment
28
Height
37.5
Zamak cruciform mounting plate Selftapping screw fixing Vertical adjustment Screws are provided on request
28
37.5
Ø8
32
Zamak cruciform mounting plate Selftapping screw fixing Independent vertical adjustment Screws are provided on request
28
K
Oval face plate for glass door hinge
Colour
Bright chrome
Code
51.0150.05. 01D.00
Matt chrome
51.0150.0G.01D.00
Brass plated
51.0150.04. 01D.00
Black painted
51.0150.08. 01D.00
Black RAL 9005
51.0150.0T. 01D.00
White painted
51.0150.0A.01D.00
White RAL 9016
51.0150.01. 01D.00
Metallized bright chrome
51.0150.0K. 01D.00
Metallized bright gold
51.0150.0H.01D.00
Matt chrome painted
51.0150.0J. 01D.00
Matt nickel
51.0150.06. 01D.00
3
Height
Material Code
H=2
Zamak
52.02N1.05.02._
H=4
Zamak
52.02N1.05.04._
55
C
Series M Slide-On Fittings and mounting plates
Plastic or Steel symmetric hinge arm cover
Material
Code
Steel
510M000500000
Material
Code
Plastic
510M000100000
Material
Code
Nylon
5307C3_ _00000
Ø 35 mm. cover
A1 = A2 = C6 = 0I =
White RAL 9010 Brown RAL 8016 Grey RAL 7004 Painted matt aluminium
Selftapping screws with Pozi drive head, nickel for hinge and mounting plate fixing
Material
Lenght
4
Steel
12.5
1A03503415000
Code
4
Steel
15.5
1A03503425000
L
Ø
Ø
Euro screws with Pozi drive head, nickel for mounting plate fixing
Ø
Material
Lenght
6.3
Steel
10
Code
6.3
Steel
12
3A07502925000
6.3
Steel
14
3A07502915000
L
3A07502935000
Ø
56
M
Y
CM
MY
CY CMY
K
C
M
Y
CM
MY
CY CMY
K
Notes
57
C
M
Y
CM
MY
CY CMY
K
Series QS The QS series makes the FGV range complete. The main feature of this product is the cup depth of only 10 mm. that allows it to be used on a shallow door. The fixing of the hinge to the mounting plate is extremely simple and quick thanks to the slide on system. The opening angles will be from 90째 to 105째
Reliability of the performance Appropriate for shallow doors The right combination between design and performance Independent lateral adjustment Adjusting System
Independent side adjustment
Front adjustment
Vertical adjustment
Acting on the "A" screw it is possible to change the amount of the door covering on the side of the cabinet.
Acting on the "B" screw it is possible to adjust the distance between the side of the cabinet and the door.
Acting on the "C" screw of the mounting plate it is possible to adjust the door vertically.
58
C
M
Y
CM
MY
CY CMY
K
Series QS
Mounting System
A
B
C
Place the rear part of the hinge on the front side of the mounting plate.
Let the hinge slide on the mounting plate untill it stops.
Tighten the connecting screw.
59
Series QS
M
Y
CM
MY
CY CMY
K
METAL SCREWS FIXING
METAL - FIXING WITH EURO SCREWS PREMOUNTED
11
9.8
9.8
The code numbers of the products in this catalogue are made of 15 alphanumeric digits. Hereunder are indicated the methods of interpretation:
METAL DOWELS FIXING
9.8
C
Ø10
Ø26
Ø26
Ø26
38
38
Ø
ARTICLE
0
5
FINISH OR COLOUR
0
8
CRANK
0
0
0
0
38
0
VARIATIONS
HINGES Ø 26 FOR WOOD DOORS
105° PAG 62 HINGES Ø 26 FOR GLASS DOORS
Crank 0
51.QS15.05.00.02000 51.QS16.05.00.*2000 51.QS16.05.00.M2000
5
Crank 8
51.QS15.05.08.02000 51.QS16.05.08.*2000 51.QS16.05.08.M2000
5
Crank 15
51.QS15.05.15.02000 51.QS16.05.15.*2000 51.QS16.05.15.M2000
5
Crank 24°÷30°
51.QS15.05.24.00000 51.QS16.05.24.*0000 51.QS16.05.24.M0000
5
Crank 45°
51.QS15.05.45.00000 51.QS16.05.45.*0000 51.QS16.05.45.M0000
5
Crank 90°
51.QS15.05.90.00000 51.QS16.05.90.*0000 51.QS16.05.90.M0000
5
Crank 0
Crank 8
105° PAG 63 HINGES FOR CORNER CABINETS - WOOD
Crank 15
90° PAG 64 HINGES FOR CORNER CABINETS - GLASS
Crank 24°÷30°
Crank 45°
90° PAG 65 HINGES FOR DOORS WITH ALUMINIUM FRAME
Crank 90°
Crank 0
Crank 8
105° PAG 66
Crank 15
* 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
60
K
5
K
1
K
FAMILY
S
8
Q
K
1
8
5
8
Hinges:
C
M
Y
CM
MY
CY CMY
K
ALUMINIUM
CUP HOLE DISTANCE 38 X 8 mm METAL - FIXING WITH ZIP SYSTEM
NYLON - FIXING FOR GLASS DOORS
LOCK FIXING
9.8
METAL - FIXING WITH SCREWS PREMOUNTED 9.8
METAL - FIXING WITH X-PANDO DOWELS 9.8
METAL - FIXING WITH VELOFIX SYSTEM 9.8
TE
5
9 Ø10
Ø26
Ø26
Ø26
38
38
38
Ø10
Ø26 Ø26
3.6 2.5
12.7
M
51.QS18.05.00.V2000 51.QS19.05.00.02*52 51.QS19.05.00.0204* 51.QS20.05.00.02000
M
51.QS18.05.08.V2000 51.QS19.05.08.02*52 51.QS19.05.08.0204* 51.QS20.05.08.02000
M
51.QS18.05.15.V2000 51.QS19.05.15.02*52 51.QS19.05.15.0204* 51.QS20.05.15.02000
K
K
K
8
8 K
K
8
7,5
38
51.QS51.2*.00.02000 51.QS51.2*.08.02000 51.QS51.2*.15.02000 M
51.QS18.05.24.V0000 51.QS19.05.24.00*52 51.QS19.05.24.0004* 51.QS20.05.24.00000
M
51.QS18.05.45.V0000 51.QS19.05.45.00*52 51.QS19.05.45.0004* 51.QS20.05.45.00000
M
51.QS18.05.90.V0000 51.QS19.05.90.00*52 51.QS19.05.90.0004* 51.QS20.05.90.00000 51.QS51.2*.24.00000 51.QS51.2*.45.00000 51.QS51.2*.90.00000 51.QS31.05.00.02000 51.QS31.05.08.02000 51.QS31.05.15.02000 * 0 = Dowels Ø 10 mm. * D = Dowels Ø 8 mm.
*1 *2
= Screws L 12 = Screws L 15
*1 *3
= White = Black
61
C
M
Y
CM
MY
CY CMY
K
Series QS - Hinges Ø 26 for wood doors Technical specifications: - Depth of the metal cup 9,8 mm. - Cup diameter 26 mm. - Opening 105° with (K) max 4 mm. and (T) max 18 mm. - Possibility of door drilling (K) from 3 to 6 mm. - Thickness of the door (T) from 16 to 26 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T
T
H
H K A
K A
Crank 0
S
S
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
T
K
H
A
S
Crank 15
H=A+K-2
Hinge for inset doors
Table to determinate the minimum distance “A“ so that a door with “T“ thickness can open without protrusion from the cabinet and without interfering with adjacent doors. T=
16
17
18
19
20
21
22
23
24
25
K = 3
A=
1.61
2.25
3.02
3.84
4.69
5.59
6.49
7.41
8.35
9.27
10.2
K = 4
A=
1.55
2.07
2.73
3.49
4.3
5.14
6.01
6.9
7.8
8.7
9.63
K = 5
A=
1.46
1.91
2.47
3.15
3.9
4.69
5.52
6.39
7.24
8.13
9.03
K = 6
A=
1.38
1.79
2.29
2.88
3.56
4.3
5.09
5.9
6.74
7.61
8.48
H
D
D = 1 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 68 to page 69
62
26
C
M
Y
CM
MY
CY CMY
K
Series QS - Hinges Ø 26 for glass doors Technical specifications: - Nylon cup - Cup diameter 26 mm. - Opening 105° - Possibility of door drilling (K) from 3 to 6 mm. - Thickness of the door (T) from 4 to 5 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
T T
H
H K
K
Crank 0
A
S
A
S
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
T
K A
H S
Crank 15
H=A+K-2
Hinge for inset doors
D
H D = 1 + H + Crank height
* The mounting plates and fittings for this hinge series are shown on pages 68 to page 69
63
C
M
Y
CM
MY
CY CMY
K
Series QS - Hinges for corner cabinets - wood doors Technical specifications: - Depth of the metal cup 11,7* mm. - Cup diameter 26 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 16 to 26 mm.
HINGE FOR CABINETS WITH 24°÷30° ANGLES
24°
24°
24°÷30°
30°
H=6
H=0
5
K=
K=
5
37
37
HINGE FOR CABINETS WITH 45° ANGLES
HINGE FOR CABINETS WITH 90° ANGLES
45°
45°
90° H=4
H=4 24.5 5
K=
K=5 37
* To order the metal cup depth 9,8, pls input the code no. ......C00
The mounting plates and fittings for this hinge series are shown on pages 68 to page 69
64
C
M
Y
CM
MY
CY CMY
K
Series QS - Hinges for corner cabinets - glass doors Technical specifications: - Nylon cup - Cup diameter 26 mm. - Opening 90° - Possibility of door drilling (K) from 3 to 5 mm. - Thickness of the door (T) from 4 to 5 mm.
HINGE FOR CABINETS WITH 24°÷30° ANGLES
24°
24°
24°÷30° 30°
H=4
H=0
5
K=
K=
5
37
37
HINGE FOR CABINETS WITH 45° ANGLES
HINGE FOR CABINETS WITH 90° ANGLES
45°
45°
90° H=4
H=4 24.5 5 K=
K=5 37
The mounting plates and fittings for this hinge series are shown on pages 68 to page 69
65
C
M
Y
CM
MY
CY CMY
K
Series QS - Hinges Ø 26 for doors with aluminium frame, lock fixing Technical specifications: - Opening 105° - Aluminium frame (K) min. 3 to max. 6 mm.
Formula to determinate the thickness “H“ of the mounting plate* required for use 0, 8, 15 mm. crank.
H H A
Crank 0
A
S
S
Crank 8
H = (13 + A + K) - S
Hinge for lay-on doors
H = (5 + A + K) - S
Hinge for partial lay-on doors
Assembly instructions:
H
A
S
Crank 15
H=A+K-2
Hinge for inset doors
Connecting joints:
Example of aluminium profiles: 20.8
20.5 K=4
K=6 20
17.9 23.5
28
5.6 8
5.2 5.2
2 Holes - Art. 510A31072F000 4 Holes - Art. 510A31074F000
20.5
20.5 K=4
K=4
6.7 1.2 5.2
17.9 23.5
5.6
H
D
45 5.2
38.3
D = 1 + H + Crank height
7.3
* The mounting plates and fittings for this hinge series are shown on pages 68 to page 69
66
C
M
Y
CM
MY
CY CMY
K
Rapid fixing systems Zip System The best system on the market toll free.
Insert by hand the hinge on the door.
Hinge cup Ø26:
Push to fix the hinge.
Ø26
K
7,5
38
Velofix System Quick system to mount the hinge on the door.
90°
Insert by hand the hinge on the door.
Turn the screw at 90° to stop.
X-pando System Hinge with 8 and 10 mm. Ø expanding dowels and screws, pre-mounted.
Insert by hand the hinge on the door.
Tighten the screws.
67
CM
MY
CY CMY
K
Metal cruciform mounting plate Euro screws premounted Vertical adjustment
The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation Mounting plates:
2
FAMILY
0
4
37
0
1
M
5
FINISH OR COLOUR
ARTICLE
0
2
0
0
CRANK
0
0
0 Ø5
VARIATIONS
Metal cruciform mounting plate Premounted selftapping screws Ø 4.7 mm. Vertical adjustment
Material
Code
H=0
Steel
52.03G5.M5.00.1
H=2
Steel
52.03G5.M5.02.1
H=4
Steel
52.03G5.M5.04.1
H=6
Steel
52.03G5.M5.06.1
1
Ø5
32
37
Height
Material
Material
H
Code
H=0
Steel
52.0316.M5.00._
H=2
Steel
52.0316.M5.02._
H=4
Steel
52.0316.M5.04._
H=6
Steel
52.0316.M5.06._
37
Height
Material
H=0
Steel
52.0301.M5.00.1
Code
H=2
Steel
52.0301.M5.02.1
H=4
Steel
52.0301.M5.04.1
H=6
Steel
52.0301.M5.06.1
7.5
9.2
Metal cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
Height
D
Metal cruciform mounting plate Selftapping screw fixing. Vertical adjustment Screws are provided on request
32
Ø3
32
37
Height
32
5
C
10
Fittings and mounting plates
Y
12
Series QS
M
14
C
3
Code
H=0
Steel
52.03N5.M5.00._
H=2
Steel
52.03N5.M5.02._
H=4
Steel
52.03N5.M5.04._
H=6
Steel
52.03N5.M5.06._
Metal cruciform mounting plate Premounted selftapping screws Ø 4.7 mm. Vertical adjustment
C
Ø8
32
37
Material
H=0
Steel
52.03_5.M5.00.1
H=2
Steel
52.03_5.M5.02.1
H=4
Steel
52.03_5.M5.04.1
H=6
Steel
52.03_5.M5.06.1
68
32
Steel
52.03G1.M5.02.1
Metal cruciform mounting plate Fixing by expanding dowels Ø 5 mm. Vertical adjustment
Height
Material
Ø5
F
Code
H=0
Steel
52.03_5.M5.00.1
H=2
Steel
52.03_5.M5.02.1
H=4
Steel
52.03_5.M5.04.1
H=6
Steel
52.03_5.M5.06.1
32
8,5
10,8 D
Ø 10
H=2
Code
Code
28
37
Material
E
Height
Metal cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment
Height
7,5
Metal cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
10
Ø3
32
28
Height
Material
H=2
Steel
Code
52.03N1.M5.02.1
C
Series QS Fittings and mounting plates
M
Y
CM
MY
CY CMY
K
Oval face plate for glass door hinge
Colour
7,5
10
Metal cruciform mounting plate Knock-in fixing with dowels Ø 8 mm. Vertical adjustment
C
Code
Bright chrome
51.0150.05. 01D.00
Matt chrome
51.0150.0G.01D.00
Brass plated
51.0150.04. 01D.00
Black painted
51.0150.08. 01D.00
Black RAL 9005
51.0150.0T. 01D.00
White painted
51.0150.0A.01D.00
White RAL 9016
51.0150.01. 01D.00
Metallized bright chrome
51.0150.0K. 01D.00
Metallized bright gold
51.0150.0H.01D.00
Matt chrome painted
51.0150.0J. 01D.00
Matt nickel
51.0150.06. 01D.00
E
28
Material
H=2
Steel
Code
52.03_1.M5.02.1
Selftapping screws with Pozi drive head, nickel for hinge and mounting plate fixing
Ø
Material
Lenght
4
Steel
12.5
1A03503415000
Code
4
Steel
15.5
1A03503425000
L
32
Ø8
Height
Metal cruciform mounting plate Knock-in fixing with dowels Ø 10 mm. Vertical adjustment 8,5
10,8
Ø
D
F
28
Material
H=2
Steel
Code
52.03_1.M5.02.1
32
Ø 10
Height
Ø
Material
Lenght
6.3
Steel
10
3A07502935000
Code
6.3
Steel
12
3A07502925000
6.3
Steel
14
3A07502915000
L
Metal cruciform mounting plate Euro screws premounted Vertical adjustment
Euro screws with Pozi drive head, nickel for mounting plate fixing
C
10
12
14
Ø
D
H
28
Round face plate for glass door hinge
Material
H=2
Steel
Code
52.0321.M5.02._
32
Ø5
Height
Colour
Code
Bright chrome
51.0150.05. 01R.00
Matt chrome
51.0150.0G.01R.00
Brass plated
51.0150.04. 01R.00
Black painted
51.0150.08. 01R.00
Black RAL 9005
51.0150.0T. 01R.00
White painted
51.0150.0A.01R.00
White RAL 9016
51.0150.01. 01R.00
Metallized bright chrome
51.0150.0K. 01R.00
Metallized bright gold
51.0150.0H.01R.00
Matt chrome painted
51.0150.0J. 01R.00
Matt nickel
51.0150.06. 01R.00
69
C
M
Y
CM
MY
CY CMY
K
Series Institutional 270° MOUNTING PLATES The code numbers of the products in this catalogue are made of 13 and\or 15 alphanumeric digits, the last numbers (not specified in the catalogue) identify some technical and packaging versions. Hereunder are indicated the methods of interpretation
METAL MOUNTING PLATE FIXING WITH DOWELS Ø 5 MM VERT. ADJUSTMENT WITH CAM
MOUNTING PLATE FIXING WITH SELFTAPPING SCREWS
MOUNTING PLATE FIXING WITH EURO SCREWS PREMOUNTED
Hinges:
H
ARTICLE
5
0
5
FINISH OR COLOUR
0
8
CRANK
0
0
0
0
0
VARIATIONS
32
MOUNTING PLATE
37
FAMILY
S
M
37
1
37
5
32
32
Crank 5
52.0UFF.R5.05.0N0
52.0UFF.05.05.010
52.0UFF.05.05.*60
Crank 11
52.0UFF.R5.11.0N0
52.0UFF.05.11.010
52.0UFF.05.11.*60
Crank 15
52.0UFF.R5.15.0N0
52.0UFF.05.15.010
52.0UFF.05.15.*60
Crank 19
52.0UFF.R5.19.0N0
52.0UFF.05.19.010
52.0UFF.05.19.*60 * A = Euro screws 14 * B = Euro screws 12 * G = Euro screws 10
HINGE - CUP HOLE D. 45 X 9,5 METAL DOWELS FIXING
METAL SCREWS FIXING
METAL DOWELS FIXING
45
52
Ø10
Ø35
52
5.5
Ø35
5.5
9.5
45
Ø35
9.5
Ø8
Ø35
11
11
METAL SCREWS FIXING
HINGE - CUP HOLE D. 52 X 5,5
HINGE CUP
51.GUF5.05.00.C00
70
51.GUF6.05.00.S00
51.GUF5.05.00.B00
51.GUF6.05.00.B00
C
M
Y
CM
MY
CY CMY
K
Series Institutional 270° Technical specifications: - Depth of the zamak cup 12,5 mm. - Opening 270°
10,5
5,5
37
37
Crank 5
Crank 11
19,5
15,5
37
37
Crank 15
Crank 19
Door drilling:
Ø 35
14
71
C
M
Y
CM
MY
CY CMY
K
Assembly machines HF/BP
Boring and inserting machine for hinges and plates 32
- Elettropneumatic
32
32
32
32
32
ALFA
32
B
32
- Packing dimensions: 1130x800x930h mm.
A
32
BETA
32
B
32
32
- Additional insertion matrix for hinges or fittings
A
DELTA
A
STANDARD
B
Star
32
A
- Motor power 1,5 Kw.
- Voltage on request
32
32
- 5 boring heads available - Net weight 64 Kg.
32
B
32
B
32 A
A B
52 5,5
GAMMA
48 6
45 9,5
38 8
Boring and inserting machine for hinges and plates
- Elettropneumatic
B
DX
- 3 boring heads available
SX
32
A
COD. C2
- Motor power 0,75 Kw. 32
32
- Net weight 54 Kg. - Packing dimensions: 800x750x810h mm.
B
DX
SX
A
DX
COD. C3
- Voltage on request - Additional insertion matrix for hinges or fittings
A B
A B
48 6
45 9,5
52 5,5
38 7,5
A B
38 8
45 9,5
48 6
52 5,5
COD. C1
HF-Mini
Boring machine for hinges
- Manual acting - 1 boring head with 3 (chucks) drilling heads
B
A
- Motor power 0,56 Kw. - Net weight 45 Kg. - Packing dimensions: 500x380x680h mm. - Voltage on request
72
C
Mini Junior
M
Y
CM
MY
CY CMY
K
Boring and inserting machine for hinges and plates
- Elettropneumatic
B
DX 32
SX
- 3 boring heads available
A
COD. C2
- Motor power 0,75 Kw. 32
- Net weight 64 Kg. - Packing dimensions: 850x850x830h mm.
B
SX
A
- Voltage on request - Additional insertion matrix for hinges or fittings
DX
32
DX
COD. C3
A B
A B
48 6
45 9,5
52 5,5
38 7,5
COD. C1
HF-Mini Pneum
Boring and inserting machine for hinges
- Elettropneumatic
B
- 1 boring head with 3 (chucks) drilling heads
A B
38 8
45 9,5
48 6
52 5,5
A B
38 7,5
45 9,5
48 6
52 5,5
A
- Motor power 0,56 Kw. - Net weight 50 Kg. - Packing dimensions: 500x380x750h mm. - Voltage on request - Additional insertion matrix for hinges
• Available also without inserting mechanism
Trimatic
Drilling Jig
- Operates with drill press or hand drill - 1 boring head with 3 (chucks) drilling heads
B
A
- Net weight 3 Kg. - Packing dimensions: 240x160x120h mm. - Voltage on request
Technical features of the products could be subject to modifications without prior notice.
73
GB
10.06
FGV SLOVAKIA, Spol s r.o. Partizánska cesta 73, P.O.BOX 87 957 01 Bánovce nad Bebravou - SLOVAKIA Tel. +421 (0) 38 7626 100 Fax +421 (0) 38 7626 105 info@fgv.sk
Hinges
FGVTN BRASIL LTDA. Rua Francisco Derosso, 1352 Curitiba Paranà 81710 000 - BRASIL Tel. +55 41 2107 4411 Fax +55 41 3275 3038 fgvtn@fgvtnbrasil.com.br http://www.fgvtnbrasil.com.br FGV ASIA Limited 2503A-2505, 113 Argyle Street Kowloon, Hong Kong - P R CHINA Tel.+852 2648 7419 Fax +852 2648 7389 info@fgvasia.com www.fgvasia.com FGV (Guangzhou) Company Limited Units 2710-2711, Yang Cheng International Trading Centre East Tower, Ti Yu Dong Lu, No. 122 Guangzhou - P R CHINA Tel. +86 20 38870570 Fax +86 20 38870323 info@fgvchina.com www.fgvchina.com DEUTSCHE FGV Formenti & Giovenzana Möbelbeschläge GmbH Industriestr. 44 D-33397 Rietberg - GERMANY Tel. +49 (0) 5244-9708-0 Fax +49 (0) 5244-9708-15 http://www.fgvgermany.com FORMENTI & GIOVENZANA POLSKA Sp. z o.o. Ul. Boleslawiecka 8a 98-400 Wieruszów - POLAND Tel. +48 62 58 10 400 Fax +48 62 58 10 480 http://www.fgvpolska.pl FGV LIFESTYLES INDIA Pvt. Ltd. B 104 Abhinav Apartments Shradhanand Road Vile Parle (East) Mumbai 400057 - INDIA Tel. +91 2226180007 / 26101534 Fax +91 2226180006 fgvlifestyles@vsnl.net FGV AMERICA, Inc. PO Box 691 056 Charlotte, NC 28227-7018 Tel. +1 800 619 5446 Fax +1 800 876 7454 http://www.fgv.it CRESTWOOD FITTINGS Ltd. Crestwood House St. Martin's Stamford Lincolnshire PE9 2LG - U.K. Tel. +44 (0) 1780-753407 Fax +44 (0) 1780-752344 www.crestwood.co.uk
FORMENTI & GIOVENZANA S.p.A. Via Concordia, 16 20050 Veduggio con Colzano (MI) - ITALY Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788 http://www.fgv.it - info@fgv.it
CONTEC - INTERNATIONAL 131, rue de Paris F - 94220 Charenton-Le-Pont - FRANCE Tel. +33 (0) 1 56 29 15 15 Fax +33 (0) 1 56 29 15 16 http://www.contec-international.com
The right collection