maxicoll 2013 catalog

PRODUCTS CATALOG 2013

Maxicoll Construction Chemicals, since 2002, production of building materials for the construction industry and the chemical content of their domestic / international marketing of services.

Maxicoll Construction Chemicals production activities from Istanbul, Kahramanmaras and Bilecik today with modern manufacturing facilities, production capacity increases with each passing day. Particularly adhesives, joint fillers, thermal insulation mortars, plasters, repair mortars, screeds, primers and auxiliary products to over thirty thousand main products, with more than a hundred sub-product production activities are in progress.

Our company is equipped with modern testing devices, Quality Control and R & D laboratories of all products, able to control compliance with relevant quality standards and develop. Maxicoll given the importance of quality construction chemicals of international quality standard ISO 9001: 2008 quality management certificate also proven by.

In addition, our industry is an important and necessary for the TSE standards TS EN 13888 standards EN 12004 and manufacture products.

Customer satisfaction is a top priority that determines our company, our customers' expectations and needs as soon as possible an efficient, economical solutions. In addition, the product design has all the requirements of our customers before and after sales all kinds of technical information that allows other necessary product designs to meet the needs of our customers are able to make the original.

Young and dynamic staff and experienced dealers throughout Turkey uygulay覺c覺lar覺m覺zla hand in hand with outstanding quality to our customers for many years, the primary goal is to create a robust and aesthetic interest.

FAMILY MAXICOLL Maximum quality, maximum convenience

CONTENTS 2 MAXICOLL PRODUCTS 3 EXTRA ADHESIVE 4 FLEX ADHESIVE 5 GRANITE ADHESIVE 6 ULTRA-FLEX ADHESIVE 7 OUTLET AREA RAPID ADHESIVE 8 MAXLMAX STUCK ON HIGH BUILDINGS. MORTAR 9 READY TO USE PASTE TYPE OF CERAMIC / TILE ADHESIVE 10 AERATED CONCRETE / BIMS BRICK MORTAR ADHESIVE-KNIT 11 HEAT COATING ADHESIVE EXPANDABLE POLYSTYRENE 12 HI-MAX READY MULTI-PURPOSE ADHESIVE CREAM 13 GIRLS GLASS BRICK MORTAR 14 POOL TILE ADHESIVE 15 JOINT FILLER 0-6 MM FUGA 16 3-15 MM FLEX JOINT FILLER FUGA 17 3-20 MM ULTRA FLEX JOINT FILLER 18 POOL JOINT FILLER FUGA 19 REPAIR MORTAR - THIN 20 REPAIR MORTAR – THICK 21 DECORATIVE PLASTER 22 FINE PLASTER 23 HEAVY PLASTER 24 HEAT COATING PLASTER 24 READY PLASTER ACRYLIC FELT, AND EXPANDABLE POLYSTYRENE 25 SUPER ELASTIC WATER INSULATION MATERIAL 26 SEMI ELASTIC WATER INSULATION MATERIAL 27 AKRILIKIT 28 MAXI-BITUMEN 29 NEGATIVE WATER INSULATION MATERIAL 30 HEAT AND SOUND INSULATION CAPABLE OF PLASTER 31 MAXI-GROUT - 70 32 MAXI-GROUT - 40 33 SURFACE CURING 34 SELF-LEVELING SAP 35 COARSE ALUM FLAT 36 MAXI-HOLD PROMOTION PRIMER 37 GYPSUM PLASTER PRIMER 38 ADHESION PROMOTER PRIMER 39 CERAMIC SURFACE PROTECTIVE PROTECTIVE & JOINT 40 DIRT AND WATER REPELLENT ANTI-STAIN REMOVER 41 CEMENT CLEANER 42 PERCENTAGE OF MULTI-PURPOSE MORTAR 43 EPOXY BASED STUCK. AND GROUTING 44 SIM-EFFECT EPOXY 45 EPOXY PRIMER 46 EPOXY FLOOR COATING

CERAMIC TILE ADHESIVE PRODUCT DESCRIPTION • Cement-based, ceramic adhesive mortar thixothropic.

Construction Chemicals

Adhesive

WHITE CERAMIC TILES NATURAL STONE

Application Areas: • Small and medium-sized floor or wall tiles, travertine, decorative brick cladding, eg. horizontal and vertical bathroom or kitchen areas.(concrete, plaster, alum used in the implementation of such surfaces.)

Technical Specifications: • Proved Quality adhesive.

• Easy to trowel. (23 ° C and 50% RH) Appearance: Grey or White powder Shelf life: 12 months in unopened package between +5 ° C - +35 ° C in a non-humid enviroment Mixing Ratio: 6 to 7.5 L of water / 25 kg powder Pot life: 3 hours Reusage time: 8 hours on the wall 24 hours on the floor Consumption: 4,5 - 5 kg/m2 Performance Specifications:Slip(EN 1308): £ 0.5 mm Adhesion: • Open Time (EN 1346): At least 20 min. After the £ 0.5 N/mm2 • Start (EN 1348): 2: 0.5 N/mm2 • After immersion in water (EN 1348):> 0.5 N/mm2 • After freeze-thaw cycles (EN 1348):> 0.5 N/mm2 • Temperature Range: (-30 ° C) - (+70 ° C) Surface Preparation • Be sure the surface is improved and strong.

• Must be free of scrapings and debris that may prevent adhesion.

• Surface defects should be corrected with the application of Repair Mortar Maxicoli.

Warnings • Do not inhale cement dust Avoid contact with bare skin and directly to eyes.

Storage: Up to 10 layer stacks in dry environment.

Packaging: 25 kg. kraft paper bag.

Construction Chemicals

Quality Certificates: TS 11140 EN 12004 and DIN EN 12004 certified C1T class.

Adhesive

GREY CERAMIC TILES NATURAL STONE

CONSTRUCTION CHEMICALS 1: Normal improving (standard performance), T: vertical slip, Public Works Item No: 04 013/1 Application Instructions • 25 kg of powder should be added to 6 to 7.5litre of waterslowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not beincluded not mentioned in the procedures.

Application Instructions.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication,stir for 1-2 minutesrestart the application again.

• To obtain a better adhesive performance for mortar, apply it tosurface with the notched side of trowel, to threaded portion of the tile with the flat side of trowel with selected size accordancely.

• Tiles glued onto the combed mortar, must be applied force with a rubber hammer within 20 minutes .

Enviromentalconditions like High-temperature, low humidity, sun, wind, etc. may shorten this timeenviromental. Be sure mortar bonding timegamust not be expired , if so the mortar must be scratched.

• The mortar should be used within 3 hours.

• Expired or shell mortar should be discarded. After the implementation tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Extra Maxicoli Tiles should be avoided of direct contacting with water for at least 24 hours.

• Joint filling process should be applied for walls after 8 hours, forthe ground after 1 day of application

ADHESIVE FOR CERAMIC / TILE / NATURAL STONE

Construction Chemicals

Product Description • Cement-based, ceramic adhesive mortar thixothropic.

Application Areas • Small and medium-sized floor or wall tiles, natural stone, travertine, glass brick, decorative brick cladding, eg. horizontal and vertical bathroom or kitchen wet areas. (concrete, plaster, alum used in the implementation of such surfaces.)

Adhesive

WHITE

CERAMIC MARBLE NATURAL STONE

Construction Chemicals

Adhesive

GREY

CERAMIC MARBLE NATURAL STONE

Features • Proved Quality adhesive.

• Easy to trowel Easy to trowel Technical Specifications (23 ° C and 50% Relative Humidity) General Specifications Appearance: Grey / White color powder Shelf life: 12 months in original sealed packagges Application Specifications Application Temperature: (+5 ° C) - (+35 ° C) Mixing Ratio: 6 to 7.5 it water / 25 kg powder Pot life: 3 hours Reusage time: 8 hours on the wall 24 hours on the floor Consumption: 4,5 - 5 kg/m2 Performance Specifications Slip (EN 1308):<0.5 mm Adhesion: • Open Time (EN 1346): At least 20 min. After> 0.5 N/mm2 • Start (EN 1348):> 0.5 N/mm2 • After immersion in water (EN 1348):> 0.5 N/mm2 • After freeze-thaw cycles (EN 1348):> 0.5 N/mm2 • Temperature Range: (-30 ° C) - (+80 ° C) Warnings • Do not inhale cement dust Avoid contact with bare skin and directly to eyes.

Storage: Up to 10 layer stacks in dry environment.

Packaging: 25 kg. kraft paper bag.

Do not inhale cement dustQuality Certificates: TS 11140 EN 12004 and DIN EN 12004 C2 (*) class. (*) C: Cement, 1: Normal improving (standard performance), T: vertical slip, Public Works Item No: 04.01301 Application Instructions • Be sure the surface is improved and strong.

• Must be free of scrapings and debris that may prevent adhesion.

• Surface defects should be corrected with the application of Repair Mortar Maxicoli. improved Application Instructions • 25 kg of powder should be added to 6 to 7.5 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes.

• To obtain a better adhesive performance for mortar, apply it to surface with the notched side of trowel, to threaded portion of the tile with the flat side of trowel with selected size accordancely.

• Tiles glued onto the combed mortar, must be applied force with a rubber hammer within 25 minutes .Enviromental conditions like High-temperature, low humidity, sun, wind, etc. may shorten this time. Be sure mortar bonding timega must not be expired , if so the mortar must be scratched.restart the application againenviromental • The mortar should be used within 3 hours.

• Expired or shell mortar should be discarded. After the implementation tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Extra Maxicoli Tiles should be avoided of direct contacting with water for at least 24 hours.

• Joint filling process should be applied for walls after 8 hours, forthe ground after 1 day of application

GRANITE TILE ADHESIVE

Construction Chemicals

Granite Adhesive

WHITE

CERAMIC MARBLE NATURAL STONE

Construction Chemicals

Granite Adhesive

GRAY

GRANITE NATURAL STONE

Product Description • Cement-based, high-performance adhesive mortar thixothropic. Application Areas • for implementation on horizontal and vertical concrete, plaster and screed surfaces for interior and outside applications of granite, natural granite, large-sized ceramic, porcelain, ceramic, cotto, clinker coating materials, • Applications of old ceramic tilesandmarbletiles , • Places with heavy pedestrian traffic load like and malls, hospitals, schools Technical Specifications • High adhession strength.

• Vertical slip surface applications.

• Easy to trowel.

• Appearance: Grey or White powder • Shelf Life: 12 months in original sealed packaging High adhesive strength.Easy to trowelEasy to trowel.

Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 5.5 to 6 ltwater / 25 kg powder • Pot Life: 6 hours • Reusage time: 8 hours on the wall 24 hours on the floor • Consumption: Average 4.5 to 5 kg/m2 Performance Specifications • Slip (EN 1308):<0.5 mm • Adhesion to: • Open Time (EN 1346): At least 20 min. After> 0.5 N/mm2 • Start (EN 1348):> 1 N/mm2 • After immersion in water (EN 1348):> 1 N/mm2 • After freeze-thaw cycles (EN 1348):> 1 N/mm2 • Temperature Range: (-30 ° C) - (+80 ° C) • Hazardous Substances (EN 12004): Appropriate • Flammability: A1 Warnings • Do not inhale cement dust. Avoid contact with bare skin and directly to eyes.

•Storage: Up to 10 layer stacks in dry environment.

•Packaging: 25 kg. kraft paper bag.

Do not inhale cement dustQuality Certificates C2T class EN 12004 certified. C: Cement 2: High-performance T: vertical slip of Public Works Item No: 04.01301, 04.01304 Application Instructions Surface Preparation • Be sure the surface is improved and strong.

• Must be free of scrapings and debris that may prevent adhesion.

• Surface defects should be corrected with the application of Repair Mortar Maxicoli. improved • 25 kg MAXICOLL GRANITE should be added to 5.5 to 6litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes.

• To obtain a better adhesive performance for mortar, apply it to surface with the notched side of trowel, to threaded portion of the tile with the flat side of trowel with selected size accordancely.

• Tiles glued onto the combed mortar, must be applied force with a rubber hammer within 25 minutes .Enviromental conditions like High-temperature, low humidity, sun, wind, etc. may shorten this time. Be sure mortarbonding timega must not be expired , if so the mortar must be scratched •In the implementation of 40x40 cm and larger size coating materials, to heavy pedestrian traffic-load places , combined method should be preferred.

• restart the application again enviromental

CERAMIC, GRANITE, NATURAL STONE, FOR PORCELAIN TILE ADHESIVE

Construction Chemicals

Adhesive

WHITE GRANITE NATURAL STONE PORCELAIN CERAMIC WATER REPELLENT

Construction Chemicals

Adhesive

GRAY GRANITE NATURAL STONE PORCELAIN CERAMIC WATER REPELLENT

Product Description • Cement-based, high-performance adhesive mortar thixothropic. Application Areas • For implementation onhorizontal and vertical concrete, plaster and screed surfacesfor interior and outside applications of granite, natural granite, large-sized ceramic, porcelain, ceramic, cotto, clinker coating materials • Applications of old ceramic tiles andmarbletiles , • Places with heavy pedestrian traffic load like and malls, hospitals, schools Technical Specifications • High adhession strength.

• Vertical slip surface applications.

• Easy to trowelEasy to trowel.

• Appearance: Grey or White powder • Shelf Life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 5.5 to 6 ltwater / 25 kg powder • Pot Life: 6 hours • Reusage time: 8 hours on the wall 24 hours on the floor • Consumption: Average 4.5 to 5 kg/m2 Performance Specifications • Slip (EN 1308):<0.5 mm • Adhesion to: • Open Time (EN 1346): At least 20 min. After> 0.5 N/mm2 • Start (EN 1348):> 1 N/mm2 • After immersion in water (EN 1348):> 1 N/mm2 • After freeze-thaw cycles (EN 1348):> 1 N/mm2 • Temperature Range: (-30 ° C) - (+80 ° C) • Hazardous Substances (EN 12004): Appropriate • Flammability: A1 Warnings • Do not inhale cement dust. Avoid contact with bare skin and directly to eyes.

•Storage: Up to 10 layer stacks in dry environment.

•Packaging: 25 kg. kraft paper bag.

Do not inhale cement dust Quality Certificates C2T class EN 12004 certified. C: Cement 2: High-performance T: vertical slip of Public Works Item No: 04.01301, 04.01304 Application Instructions Surface Preparation • Be sure the surface is improved and strong.

• Must be free of scrapings and debris that may prevent adhesion.

• Surface defects should be corrected with the application of Repair Mortar Maxicoli.improved• 25 kg MAXICOLL GRANITE should be added to 5.5 to 6 liter of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes.

• To obtain a better adhesive performance for mortar, apply it to surface with the notched side of trowel, to threaded portion of the tile with the flat side of trowel with selected size accordancely.

• Tiles glued onto the combed mortar, must be applied force with a rubber hammer within 25 minutes .Enviromental conditions like High-temperature, low humidity, sun, wind, etc. may shorten this time. Be sure mortarbonding timega must not be expired , if so the mortar must be scratched •In the implementation of 40x40 cm and larger size coating materials, to heavy pedestrian traffic-load places , combined method should be preferred.

• The mortar should be used within 3 hours.

• Expired or shell mortar should be discarded. After the implementation tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Extra Maxicoli Tiles should be avoided of direct contacting with water for at least 24 hours.

• Joint filling process should be applied for walls after 8 hours, for the ground after 1 day of application restart the application again enviromental

RAPID SETTING Fast-Improving Adhesive

Construction Chemicals

Rapid Setting Adhesive

WHITE

CERAMIC GRANITE NATURAL STONE

Construction Chemicals

Rapid Setting Adhesive

GRAY

CERAMIC GRANITE NATURAL STONE

Product Description • Cement-based, high performance, fast setting adhesive. Application Areas • Interior and exterior flooring applications of coating materials such as large-sized ceramic tiles, granite, ceramic, porcelain, ceramic, terracotta, clinker, marble for bonding surfaces like concrete, plaster, screed without the need for a combined method • Places with heavy pedestrian traffic load like and malls, hospitals, schools • It is ideal for use after1 day of application for all day use open spaceflooring..

Features • Less consumption, saves time and labor.

• Fast setting feature strengthen after 6 hours, joint allows charging after 3-4 hours .

• High adhesive strength.

• Long open time.

• Easy to trowel .

Technical Specifications Technical Specifications (at 23 ° C and 50% RH) Appearance Grey powder Shelf life 12 months in original sealed packaging Application temperature (+5 ° C) - (+35 ° C) Mixing Ratio 6 - 7.5 lt water / 25 kg powder Pot life 2 hours Grouting Time 3-4 hours Consumption 4-5 kg/m2 Early Tensile Adhesion Strength After 6 hours> 0.5 N/mm2 adhesion Strength • Open Time (EN 1346) at least 25 min. After> 0.5 N/mm2 • Start (EN 1348)> 1 N/mm2 • After immersion in water (EN 1348)> 0.98 N/mm2 • After freeze-thaw cycles (EN 1348)> 0.98 N/mm2 • Temperature Range (-30 ° C) - (+75 ° C) Warnings • Do not inhale cement dust. Avoid contact with bare skin and directly to eyes.

•Packaging: 25 kg. kraft paper bag.

Do not inhale cement dustQuality Certificates TS EN 12004 C2 class.

C: Cement 2: High-performance F: Fast-curing E: Extended working time Public Works Item No: 04.01301, 04.01304 Application Instructions Surface Preparation • Make sure that the surface is improved and strong.

• the surface, cleaned of debris that may prevent adhesion.

• if there are defects on the surface to be treated with the correct Maxicoll Repair Mortar. improved• 25 kg Fast İmproving Adhesive Mortar should be added to 6 to 7.5litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes.

• To obtain a better adhesive performance for mortar, apply it to surface with the notched side of trowel, to threaded portion of the tile with the flat side of trowel with selected size accordancely.

• Tiles glued onto the combed mortar, must be applied force with a rubber hammer within 25 minutes .Enviromental conditions like High-temperature, low humidity, sun, wind, etc. may shorten this time.

Be sure mortarbonding timega must not be expired , if so the mortar must be scratched •In the implementation of 40x40 cm and larger size coating materials, to heavy pedestrian traffic-load places , combined method should be preferred.

• The mortar should be used within 2 hours.

• Expired or shell mortar should be discarded. After the implementation tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Extra Maxicoli Tiles should be avoided of direct contacting with water for at least 24 hours.

• Joint filling process should be done after 3-4 hours. Application area can be aviableafter Glitter Flex FugaFugaMaxicoll grouting is applied or within 1 day.

Restart the application againenviromental.

MAXIMAX ADHESIVE HIGH BUILDINGS

Construction Chemicals

Adhesive Heights

GRAY

CERAMIC GRANITE NATURAL STONE PORCELAIN

Ceramic, Granite, Natural Stone, Porcelain Tile Adhesive Product Description two-component, cement based, high-performance, highly flexible, thixothropic, long open time adhesive mortar.

Powder Component: Cement the product contains special filler particle size chemical additives that enhance the performance and workability.

Liquid Component: emulsion polymer based additive.

Application Areas • Up to 30 m height External buildings facades of ceramic, granite, porcelain, ceramic, marble coating materialson concrete, plaster, floor screed solid surfaces. Up to 15 m height, 60 cm x 60 cm,Up to 30 m height 40 cm x 40 cm coating materials can be used. Safely for outsidebonding , adhesion .

Technical Specifications • High adhesive strength.

• Flexibility (S2 Class) feature is resistant to sudden temperature changes caused by surface tensions.

• Resistant to all weather conditions.

• Vertical slip surface applications.

• Long open time.

• Easy to dredge.

• View: 1st Component: Gray powder; 2nd Component: White liquid • Shelf Life: 12 months in original sealed packaging 2. Component Liquid

Construction Chemicals

Adhesive Heights

WHITE

CERAMIC GRANITE NATURAL STONE PORCELAIN

Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 7.50 kg liquid / 25 kg powder • Pot Life: 5 hours Slip (EN 1308):<0.5 mm • Open Time (EN 1346): At least 30 min. After> 0.5 N/mm2 • Grouting Time: 8 hours on the wall - floor 1 day MiflpCOU; • Consumption: Average 4.5 to 6.5 kg/m2 (combined method, Lubrication Method) Performance Specifications • Tensile Strength (EN 1348) • Start:> 1 N/mm2 • After immersion in water:> 1 N/mm2 • After freeze-thaw cycles:> 1 N/mm2 • Flexibility (EN 12002):> 5 mm - S2 Multi-Flex • Temperature Range: (-40 ° C) - (+80 ° C) • Hazardous Substances (EN 12004): Appropriate • Flammability: A1 Warnings Do not inhale cement dust. Avoid contact with bare skin and directly to eyes.

• Powder component must be stored in dry medium up to 10.

• The liquid component, a clean and dry place, between +5 ° C and +23 ° C, not to exposedtodirect sunlight. Must be protected from frost.

Pack • Dust: 25 kg kraft paper bags, • Liquid: 7,5 kg plastic drums.

Quality Certificates TS EN 13888 and EN 12004 R2T classes accordance with RG RG: The reaction resin grout R2: Reaction resin adhesive T: vertical slip Application Instructions Surface Preparation • Be sure the surface is improved and strong.

• Must be free of scrapings and debris that may prevent adhesion.

• Surface defects should be corrected with the application of Repair Mortar Maxicoli. improved• 25 kg MaxiMax, gently pour in the drained liquid component and mix until a homogeneous mixture is obtained. low speed mixer hould be used. Water should be added to the liquid component.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes. restart the application again• To obtain a better adhesive performance for mortar, apply it to surface with the notched side of trowel, to threaded portion of the tile with the flat side of trowel with selected size accordancely.

• The exterior combined method should be preferred.

• Tiles glued onto the combed mortar, must be applied force with a rubber hammer within 30 minutes .Enviromental conditions like High-temperature, low humidity, sun, wind, etc. may shorten this time. Be sure mortarbonding timega must not be expired , if so the mortar must be scratched For Large-sized tiles affixed to the horizontal direction, should not be passed to upper row before strengtheningthe finished. While application details of the window fronts with expansion joints the Polyurethane Sealant must be released and used for every 4-5 meters ..

• The mortar should be used within 5 hours.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Tiles with MaxiMax Avoid contact with water for at least 24 hours • Joint filling process should be applied for walls after 8 hours, for the ground after 1 day of application

READY TO TILE ADHESIVE AND JOINT FILLER Ceramic and Ceramic Mosaic Adhesive and Grout interior space Stock Product Product Description Designed for Bathroom and kitchen areas forgeneral purpose use, acrylic-based material. Application Areas • ceramic wall tiles in bathrooms kitchens and toilets • not suitable for external use.

• Suitable substrates: plaster, stucco, brick, fully painted surfaces, plywood.

• Not suitable for.continuousserving areas under water (swimming pool, water tank, etc.).

Features and Benefits • Alreadymixed.

• Easy to use.

• A strong adhesion.

Operating Instructions Tiled surfaces must be clean, dry, and be available forthe application. For gypsum, porous surfaces 1 to 4 Maxicoll Stock Adhesive proportion should bediluted with water and allowed to dry before tiling. For new plaster –wait before tiling at least 1 month to dry. at a time not larger than 1 m2 wall 'Apply adhesive to penetrate an area At a depth of 3-6 mm (. Dry surfaces, ceramics - tiles before placing adhesive along the surface, use a suitable notched trowel. All surplus adhesive, especially along the joint line, if the adhesive is still fresh clean using a damp cloth or sponge Technical Specifications View :White Application Temperature Range Front Time : +5 C to 35C drying time : 15-20 min. More adhesive should not be applied in 20 minutes. At least 24 hours Consumption: Approximately 1.5 kg / m 2 (6 mm notched trowel Consumption 2.5 kg / m 2 to) Warnings: Should be stored in cool anddry conditions.Must be protected against frost.

Shelf Life: 1 year after the date of productionin unopened packages. Packaging: 15 kg. - 5 kg.

AERATED CONCRETE ADHESIVE Block Pumice concrete and adhesive Product Description Cement-based, practical, concrete, pumice block adhesive and mesh mortar.

Application Areas • High water absorption aerated concrete, masonry, structural elements, such as pumice blocks used for weaving

Construction Chemicals Autoclaved Aerated Concrete Adhesive

Features • High adhesive strength.

• Easy to trowel• Time and labor saving.

Technical Specifications (23 ° C and 50% RH) Appearance: Grey powder Shelf life: 12 months in original sealed packaging Optimal Density: 1800-2000 ka/m3 Particle Size Max 2 mm

GRAY

Application temperature (+5 ° C) - (+35 ° C) Pot Life 5 hours Coverage: {3-3.5) kg/m2 Performance Specifications

Autoclaved Aerated Concrete Pumice Brick

Compressive Strength:> 5 N/mm2 Bond Strength:> 0.3 N/mm2 Thermal Conductivity N Fire Response: A1 Application Instructions • Apply glue to the dust free surface..

• The first step to correct disorders on the floor is bringing the classic leveling mortar.

• 25 kg Maxicol Push Mix Concrete should be added to 6.5 to 7.5 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures.

• Prepare mortar, wait for 10 minutes to mature . Before reapplication, stir for 1-2 minutes. .restart the application again• Glue should be spread evenly tothe whole surface with notched trowel comb 10x10x10 mm.

• When no more than 3 mm wide Knitting exclusion of horizontal and vertical joints are given, the adhesive joint gaps should becompletely filled with .

• on the combed mortar bonding process must be donewithin 10-15 minutes.

• The mortar should be used within 5 hours.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

Warnings • Do not inhale cement dust. Avoid contact with bare skin and directly to eyes.

Do not inhale cement dust.

•Storage: Up to 10 layer stacks in dry environment.

Packaging: 25 kg. kraft paper bag Quality Certificates TS EN 998 - February 2006 Public Works Item No: 04 478

STYROFOAM HEAT ADHESIVE COATING Adhesive insulating panels Product Description Plate Heat wrapping MAXICOLL Adhesive Bonding of thermal insulation boards designed for use inside or outside building is polymer cement-based containing additives extremely economical adhesive mortar..

Features

Construction Chemicals

It provides excellent adhesion. adhesion prevents sliding and dropping plates. Applicationtime is very convenient, saves material. High water impermeability and flexibility.

Styrofoam

Application Areas

Adhesive

Used for bonding Polyfoam Polystyrene, rock wool and rock wool heat insulation plates vertical to the floor in Internal and external environments.

Application Instructions Add 6 to 7.5 litre liter of water to 25 kg lump free mortar until it stays dry

GRAY

and mix gently. Clean the surface from debris that may prevent adhesion. If there are defects on the surface treated with the correct Maxicoll Repair Mortar. wait for 5-10 minutes to mature . Before reapplication stir.. Fit the size of plate heat thermal insulation mortar to the surface by spreading with a notched trowel. Shall be equal

High performance thermal insulation

to the quota of pressed sheets. After receiving the adhesive attach to concrete walls and slabsimprovedimproved, with the help of mechanical anchors. creating a layer of adhesive mortar before bonding should be avoided. Consume the prepared mortar within 2 hours.

Warnings Do not inhale cement dust. Avoid contact with bare skin and directly to eyes.

Any additions should not be included not mentioned in the procedures.

Application Instructions.

Store in a dry medium up to 10.

The upper level values are 23 ° C ± 2 and 50 ± 5% humidity enviromentalenviromentalconditions.

These values may vary depending on enviromentalenviromentalconditions.

Maxicoll Technical Support For technical support or more information please contact.

Technical Specifications View Application Gray Color Powder Temperature +5 ° C / +35 ° C Mixing Ratio 6-6.5 L of water / 25 kg powder Pot life 2 hours Consumption 4-5 kg / m2 Packaging 25 kg bags Shelf Life unopenned, packaggesin a dry place for 12 months Flexibility Very good TS 11140 EN 12004 Skinning Time> = 10 min. 20 min.

Shift <0.5 mm <0.5 mm Adhesion Strength> 0.5 N/mm2> 2 N/mm2

HI-MAX READY MULTI PURPOSE ADHESIVE CREAM Product Description Izoboz interior floors of all structures, Felt, Carpet Flooring, Plastic, Glass, Wood Stock Adhering adhesive.

Technical Specifications Color: White ..after drying, transparent and clear.

Density: 0.935 g/cm3 PH :6-7 CONSUMPTION: 0.300 to 0.400 kg/m2 Application Tool: Brush, Thin notched trowel-spatula, Packaging: 5 and 10 kg plastic pail packaging Shelf Life: 6 months of the original unopened packaging Application Instructions: Applied to all kinds of surfaces.dust, grease, dirt, glue, foreign objects and etc. layers must be removed.

Attenuated paste with water before use . Brush, spatula or thin serrated steel trowel can be used .tightly closed the package Cleaning of tools: wash all used materials with water immediately after application. Warnings: Between Cold (<5 ° C), hot (> 40 ° C) weather conditions and it should not be applied. Prior to application of the material, the necessary measures for rapidly water loses after adhesion .applicationand-paste operation can be ensured. Any additions should not be included not mentioned in the procedures.. Keep out of the reach of children. Use Protective goggles and gloves when working. Avoid contact with bare skin and directly to eyes.. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor. Store in a dry medium up to 10. The above values at 23 ° C ± 2 for the enviromental conditions of temperature and humidity were 50 ± 5%. These values may vary depending on enviromentalconditions.

Maxicoll technical support, or for more information, please contact Technical Support.

KNITTING GLASS BRICK MORTAR Product Description

Construction Chemicals

White cement based tile adhesive pollmer doped high-performance glass. Application Areas Glass Brick is used in weaving the interior and exterior of all buildings.

Glass Bricks Knitted Mortar

Surface Preparation • Application surface must be clean, dust and debris should be cleaned that prevent adhesion. application • mix 20 kg. Adhesive Glass Brick Light Maxicoll into the 6-7 L of water slowly until no lumps remaint.

• Rest mixture 5 minutes after prepared., re-mixeforhomogenous mixture.

• Apply mortar to glass brick surface for 3-10mm thick.

WHITE

• During the bonding process, digital control should be taken for preventing adhesion property lost.

• The mortar should be used within 2 hours.

Advantages

GLASS BRICK BTB GLASS MOSAIC

• Easy and quick to apply, • the adhesive is used as a joint sealant, • High performance, • Resistant to external factors.

Warnings OriJrme process is applied for at least 24 hours after grouting, » For high-performance application surface should be dampened after 1 day, • Do not inhale cement dust. Avoid contact with bare skin and directly to eyes. in contact with skin and eyes washwith plenty of water, • During the application remainings on Glass Brick should be wiped with a wet sponge without loss of time, • Do not exceed the specified substrate and application instructions, • For information on all other application please consult us, • Contact with eyes, rinse immediately with plenty of water, if necessary, consult your doctor. MAXICOLL technical support, or for more information, please contact Technical Support.

Packing: 25kg. Light paper bags. shelf Life : From date of manufacture in unopened packaging in dry medium 10 is 12 months.

Technical Specifications View: White Application Temperature: +5 ° C / +35 ° C Mixing Ratio : 6-7 lt. water / 20kg.

Adhesion: 2 hours

POOL TILE ADHESIVE Product Description Cement-based, high-performance, highly flexible, thixothropic, with long working hours, as well as providing water insulation adhesive.

Construction Chemicals Pool Seramic Adhesive Mortar

GRAY POOL USED FOR BONDING CERAMIC

Construction Chemicals Pool Seramic Adhesive Mortar

WHITE POOL USED FOR BONDING CERAMIC

Application Areas • bonding Interior and exterior ceramic, granite, cotto, clinker, porcelain ceramic coating materials, such as concrete, plaster, screed surfaces • Old ceramic, granite, marble, ceramic or granite slabs , • Swimming pool, Turkish bath, spa, sauna, wet areas, such as glass mosaic water tank applications, • Cold storage, freezing facilities, places where sudden temperature changes, such as floor heating systems, • Places with heavy pedestrian traffic load like and malls, hospitals, schools Technical Specifications • With high polymer content waterproofing features. Volumes of wet bonding applications, waterproofing membrane.

• High adhesive strength. Caused by sudden temperature changes • Flexibile to durable surface tensions.

• Vertical slip surface applications.

• Long open time.

• Easy to trowelEasy to trowel.

• Appearance: Grey or White powder • Shelf Life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 5 - 5,5 L of water / 25 kg powder • Pot Life: 6 hours • Slip (EN 1308):<0.5 mm • Open Time (EN 1346): At least 30 min. After the £ 0.5 N/mm2 • Usage time: 1 day 8 hours for wall-floor • Consumption: 3-5 kg/m2 • Tensile Strength (EN 1348) • Start: 1 pounds N/mm2 • After immersion in water:> 1 N/mm2 • Freeze-Thaw: cycles then> 1 N/mm2 • Flexibility (EN 12002):> 5 mm - S2 Very flexible • Temperature Range: (-40 ° C) - (+80 ° C) Application Instructions • 25 kg TechnoPool should be added to 5 to 5.5 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes restart the application again• Insulation material and the two types of bonding and waterproofing can be applied where required.

• The first method is combined with bonding application. The important point in this application iscompletely covering between the ceramic and the floor with adhesive Maxicoll pool, • The second method, on the surface at first trowelForm a layer thickness of 1-2 mm. matchoval corner joints during the application on the ground! iAfter Maxicoll paste operations pools should be operative after waiting for 24 hours.

• uses an adhesive mortar to obtain a better adhesion, spreading on the surface with the flat side of trowel selected.according to the size of the tile with a notched trowel toothed part.

• the application of coating materials combined with large-sized (two-sided sliding) bonding method.

• glued onto the combed mortar Open time is 30 minutes, preferably by applying a force with a rubber hammer. High temperatures, low humidity, wind, etc may shorten this time according toenviromental conditions. Mortar expired paste operation on the mortar surface scraped.

• The mortar should be used within 4 hours.

• Expired or shell mortar should be discarded.

• avoidBuilding Maxicoll Pool Tiles with Mortar direct contact with water for at least 24 hours.

• After application tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

•Joint filling process, the wall 8 hours, after 24 hours on the ground.

Warnings • Do not inhale cement dust. Avoid contact with bare skin and directly to eyes. in contact with skin and eyes washwith plenty of water, Do not inhale cement dust Storage: Up to 10 layer stacks, stored in a dry environment.

Packing: 25 kg bags.

Certificates of Quality: TS EN 12004 C2TE S2.

C: Cement 2: High-performance T: Vertical Slip E: Extended working time S2: Very Flexible

(0-6) MM FUGA JOINT FILLER

Construction Chemicals

Grouting

WHITE

Standard CERAMIC TILES BRICK PRESS

Product Description • Cement-based grout for standard performance. Application Areas • used to fill the joints between 0-6 mm on Floor and wall tiles, marble, natural stone, such as coating materials.

• gives excellent results Indoors, the horizontal and vertical applications,.

Technical Specifications • Smooth surface.

• Resistant to abrasion and fading.

• does not split.

• Colors fade.

• 10 different color options.

• Appearance: White or colored powder • Shelf life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 6.6 to 7 L of water / 20 kg powder • Pot life: 1 hour • Usage time: 1 day • Consumption: Refer to the Statement of grout consumption Performance Specifications • Flexural strength (EN 12808-3):> 2.5 N/mm2 • After the freeze-thaw cycles: Bending Muk. (EN 12808-3) £ 2.5 N/mm2 • Compressive Strength (EN 12808-3):> 15 N/mm2 • After the freeze-thaw cycles: Push Muk. (EN 12808-3)> 15 N/mm2 • Wear Resistance (EN 12,808-2): £ 1,000 mm3 • Shrinkage (EN 12808-4): <3mm / m • Water absorption: 30 min. / 4 hours (EN 12808-5): ^ 5 g / £ 10 gr • Temperature Range: (-30 ° C) - (+80 ° C) Application Instructions • Before grouting, adhesive should be improved.

• Joint breaks should be completely free from residues that may prevent adhesion. The depth of the joint between the ceramic thicknessshould be at least 2/3 per cent need to be.

•When highly absorbent coating materials are used and the application of hot and windy weather, the joints should be dampened with clean water.

Application Instructions •20 kg Fuga should be added to 6 to 6.6 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures. in case ofExcess water,cracking, abrasion resistance and color defects can result.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutesrestart the application again.

• spread The mortar grout to the surface joints with a rubber trowel with cross-motions and remove excess grout from the surface.

• ithe surface should be cleaned with a damp sponge in a circular motion usually after 15-30 minutes, .

Absorption of high-coating materials can be shorten in case of waiting in the sun or in, direct sun, wind, İf Deletion is done prematurely or too wet sponge is used color problem may occur with the fluctuation.

Sponge should be cleaned at frequent intervals.

After making sure that the joints are filled with Fuga, the remaining residues on the surface should be cleaned with a dry cloth.

• The mortar should be used within 1 hour.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

• If is Fugaapplied at very hot, dry and windy conditions , in order to improve the final performance wetting the joints is recommended after several hours.

• Joint application space can be used after 1 day.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. Maxicoll technical support, or for more information, please contact Technical Support.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment Packaging: 20 kg kraft paper, polyethylene bags.

Quality Certificates TS EN 13888 certified CG1 class. C: Cement G: joint filler 1: Standard performance of Public Works Item.No:04.0132

(3-15) MM FLEX JOINT FILLER FUGA

Construction Chemicals

Grouting

WHITE CERAMIC GRANITE MARBLE NATURAL STONE

Product Description • Cement-based, high-performance flexible joint filler. Application Areas • Indoor and outdoor, large-sized ceramic, granite, cotto, clinker, glass mosaic, marble, natural stone, such as coating materials in order to fill the joint between 3-15 mm • It is used at heavy pedestrian Traffic load places exterior floors, , floor heating system, places with sudden temperature shifts, swimming pool, wet areas, such as water tanks Horizontal and vertical applications, gives excellent results.

Technical Specifications • suitable for use in potable water tanks. High flexibility.Resistant to freeze-thaw cycles.Low water absorption. Smooth surface. Wear-and fade-resistant. Crack.

• Fast curing, provides immediate use in open space. Colors do not fade. Have a choice of 10 different colors.

• Appearance: White or colored powder • Shelf Life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 5.5 to 6 L of water / 20 kg powder • Pot life: 1 hour • Usage time: 1 day • Consumption: Refer to the Statement of grout consumption Performance Specifications • Flexural strength (EN 12808-3):> 2.5 N/mm2 • After the freeze-thaw cycles: Bending Muk. (EN 12808-3) £ 2.5 N/mm2 • Compressive Strength (EN 12808-3):> 15 N/mm2 • After the freeze-thaw cycles: Push Muk. (EN 12808-3) £ 15 N/mm2 • Wear Resistance (EN 12,808-2):<1000 mm3 • Shrinkage (EN 12808-4): ^ 3m m / m • Water absorption: 30 min. / 4 hours (EN 12808-5):<5 g / <10 g • Temperature Range: (-30 ° C) - (+80 ° C) Application Instructions • Before grouting, adhesive should be improved.

• Joint breaks etchshouldbe completely free of debris. The depth of the joint between the ceramic thickness souldbeat least 2/3 per cent.

• When highly absorbent coating materials are used and the application of hot and windy weather, the joints should be dampened with clean water.

Application Instructions •20 kg Flex Fuga should be added to 5.5 to 6 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures. in case ofExcess water, cracking, abrasion resistance and color defects can result.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutesrestart the application again• spread The mortar grout to the surface joints with a rubber trowel with crossmotions and remove excess grout from the surface.

• the surface should be cleaned with a damp sponge in a circular motion usually after 15-30 minutes, . Absorption of high-coating materials can be shorten in case of waiting in the sun or in, direct sun, wind, İf Deletion is done prematurely or too wet sponge is used color problem may occur with the fluctuation. Sponge should be cleaned at frequent intervals.

After making sure that the joints are filled with Fuga , the remaining residues on the surface should be cleaned with a dry cloth.

• The mortar should be used within 1 hour.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

•If is Fuga applied at very hot, dry and windy conditions , in order to improve the final performance wetting the joints is recommended after several hours.• Joint application space can be used after 1 day.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. Maxicoll technical support, or for more information, please contact Technical Support.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment Packaging: 20 kg kraft paper, polyethylene bags.

Quality Certificates TS EN 13888 certified CG2 class. C: Cement G: Grout 2: Standard performance of Public Works Item No: 04.0132

(3-15) mm FLEX JOINT FILLER FUGA

Construction Chemicals

Grouting

WHITE

silicone INTENSIVE FOOD PRODUCTION AREAS OF WET GROUND AIR TRAFIC

Product Description • Cement-based, high-performance flexible joint filler. Application Areas • Indoor and outdoor, large-sized ceramic, granite, cotto, clinker, glass mosaic, marble, natural stone, such as coating materials in order to fill the joint between 3-15 mm • It is used at heavy pedestrian Traffic load places exterior floors, , floor heating system, places with sudden temperature shifts, swimming pool, wet areas, such as water tanksHorizontal and vertical applications, gives excellent results.

Technical Specifications • suitable for use in potable water tanks. High flexibility.Resistant to freeze-thaw cycles.Low water absorption. Smooth surface. Wear-and fade-resistant. Crack.

• Fast curing, open space provides immediate use. Colors do not fade. Have a choice of 10 different colors.

• Appearance: White or colored powder • Shelf Life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 5.5 to 6 L of water / 20 kg powder • Pot life: 1 hour • Usage time: 1 day • Consumption: Refer to the Statement of grout consumption Performance Specifications • Flexural strength (EN 12808-3):> 2.5 N/mm2 • After the freeze-thaw cycles: Bending Muk. (EN 12808-3) £ 2.5 N/mm2 • Compressive Strength (EN 12808-3):> 15 N/mm2 • After the freeze-thaw cycles: Push Muk. (EN 12808-3) £ 15 N/mm2 • Wear Resistance (EN 12,808-2):<1000 mm3 • Shrinkage (EN 12808-4): ^ 3m m / m • Water absorption: 30 min. / 4 hours (EN 12808-5):<5 g / <10 g • Temperature Range: (-30 ° C) - (+80 ° C) Application Instructions • Before grouting, adhesive should be improved.

• Joint breaks should be be completely free of debris. The depth of the joint between the ceramic thickness should be at least 2/3 per cent • When highly absorbent coating materials are used and the application of hot and windy weather, the joints should be dampened with clean water.

Application Instructions •20 kg Flex Fuga should be added to 5.5 to 6 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures. in case of Excess water, cracking, abrasion resistance and color defects can result.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes• spread The mortar grout to the surface joints with a rubber trowel with cross-motions and remove excess grout from the surface. restart the application again• the surface should be cleaned with a damp sponge in a circular motion usually after 15-30 minutes, .

Absorption of high-coating materials can be shorten in case of waiting in the sun or in, direct sun, wind, İf Deletion is done prematurely or too wet sponge is used color problem may occur with the fluctuation. Sponge should be cleaned at frequent intervals.

After making sure that the joints are filled with Fuga , the remaining residues on the surface should be cleaned with a dry cloth.

• The mortar should be used within 1 hour.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

•If is Fuga applied at very hot, dry and windy conditions , in order to improve the final performance wetting the joints is recommended after several hours.• after 1 day Joint application space can be used .

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. Maxicoll technical support, or for more information, please contact Technical Support.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment Packaging: 20 kg kraft paper, polyethylene bags.

Quality Certificates TS EN 13888 certified CG2 class. C: Cement G: Grout 2: Standard performance of Public Works Item No: 04.0132

FUGA POOL JOINT FILLER 3-15 (MM) Antibacterial, High-Performance, Flexible joint filler

Construction Chemicals Pool Gap Pool Joint Grouting

CERAMIC MOSAIC POOL JOINTS USED IN WET AREAS Antibacterial

Product Description • Cement-based, anti-bacterial, flexible, high performance grout material. Application Areas • Interior and exterior, ceramic, granite, cotto, clinker, glass mosaic, marble, natural stone, such as coating materials are used to fill the joints between 0-6 mm.

• Swimming pool, water tank, sauna, spa, bathrooms and other wet areas, exterior, floor heating system, such as places where sudden temperature shifts, horizontal and vertical applications, excellent results are achieved.

Technical Specifications • Due to its antibacterial property, prevents the formation of mushrooms,mold and bacteria.

• suitable for use in potable water tanks.

• High flexibility.

• Resistant to freeze-thaw cycles.

• Low water absorption.

• Smooth surface.

• Resistant to abrasion and fading.

• does not split.

• Colors fade.

• have a choice of 9 different colors.

• Appearance: White and colored powder • Shelf Life: 12 months in original sealed packaging • Application temperature: (+5 ° C) - (+35 ° C)> • Mixing ratio: 6 to 6.6 L of water / 20 kg powder • Pot life: 1 hour • Usage time: 24 hours • Consumption: See. Grout Consumption Chart • Flexural strength (EN 12808-3): £ 2.5 N/mm2 • After the freeze-thaw cycles: Bending Muk. (EN 12808-3)> 2.5 N/mm2 • Compressive Strength (EN 12808-3): £ 15 N/mm2 • Push Muk after freeze-thaw cycles. (EN 12808-3):> 15 N/mm2 • Wear Resistance (EN 12,808-2) \ <, 1000 mm3 • Shrinkage (EN 12808-4): <3 mm / m • Water absorption: 30 min. / 4 hours (EN 12808-5):<2 g / <5 g • Temperature Range: (-30 ° C) - (+80 ° C) Application Instructions Surface Preparation • Before grouting, adhesive should be improved.

• Joint breaks should be be completely free of debris. The depth of the joint between the ceramic thickness should be at least 2/3 per cent • When highly absorbent coating materials are used and the application of hot and windy weather, the joints should be dampened with clean water.

Application Instructions •20 kg MAxicollPool Fuga should be added to 6 to 6.5litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures. in case ofExcess water, cracking, abrasion resistance and color defects can result.

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes • spread The mortar grout to the surface joints with a rubber trowel with cross-motions and remove excess grout from the surface.

• the surface should be cleaned with a damp sponge in a circular motion usually after 15-30 minutes, .

Absorption of high-coating materials can be shorten in case of waiting in the sun or in, direct sun, wind, İf Deletion is done prematurely or too wet sponge is used color problem may occur with the fluctuation.

Sponge should be cleaned at frequent intervals.

After making sure that the joints are filled with Fuga , the remaining residues on the surface should be cleaned with a dry cloth. restart the application again • The mortar should be used within 1 hour.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

• Maxicoll Pool Fuga very hot, dry and windy conditions are applied, in order to improve the final performance is recommended to wet the joints after several hours.

• after6-12 hours space of joint application can be used.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment.

Packaging: 20 kg, 5 kg polyethylene bags.

Quality Certificates TS EN 13888 certified, CG2 class C: Cement G: Joint Filler 2: High Performance Public Works Item No: 04.0132

REPAIR MORTAR - THIN

Construction Chemicals Repair Mortar

Product Description • Cement-based, polymer modified repair mortar surface. Application Areas • The exposed concrete, precast concrete, gas concrete, brick, masonry surfaces, such as thin cracks filled, cast, engraved, broken, broken surfaces, 1-5 mm is suitable for repair and plaster repairs.

• Restoration in building, painting, ceramic coating, providing a smooth surface prior to isolation Technical Specifications • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Before application, dampen the surface to get a better result or Maxicoll surface should be primed with Primer.

• Appearance Gray: colored powder • Shelf Life: 12 months in original sealed packaging

Thin REPAIR OF HIGH STRENGTH FIBER REINFORCED REPAIR MORTAR

Application Specifications Application Temperature : (+5 ° C) - (+35 ° C) Mixes Rate Cap: 5.5 to 6 it water / 25 kg powder Life Application: Max. 5 mm (one coat) Thickness Consumption: 1.5 to 2 kg/m2 (1mm thickness) Usage time: 6 hours Performance Specifications Compressive Strength (EN 12808-3) Flexural Strength (EN 12808-3) :> 13.0 N/mm2 (28 days) Adhesion to Concrete (EN 1542) : Temperature Resistance :> 4.0 N/mm2 Restrained shrinkage-expansion (EN 12,617 to 4) : 1 N/mm2 (-30 ° C) - (+80 ° C) Capillary Water Absorption (EN 13 057) :> 0.8 N/mm2 Flammability (EN 13501-1 : <0.5 kg/m2h0, 5 A1 Application Instructions • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Prior to application, the surface should be dampened or primed with Maxicoii to get a better result.

• 25 kg Maxicoll Repair Mortar should be added to 5.5 to 6litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures. .• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutesrestart the application again.

• The surface must be smoothed with a wet sponge.

• After application, the surface should humiditisewettenfor 24 hours from time to time. In ideal weather conditions and with normal absorption it shouldbe waitted for about 6 hours before the ceramic coating on a surface, this time is shorter inthe summer, longer in the winter months.

• The mortar should be used within 60 minutes.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water Warnings • Do not inhale cement dust, Avoid contact with skin and eyes.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment.

Packing: 25 kg bags.

Quality Certificates TSEK Public Works Item No: 04.61331

REPAIR MORTAR - THICK

Construction Chemicals Repair Mortar

Product Description • Cement-based, poiimer reinforced repair mortar surface. Application Areas • The exposed concrete, precast concrete, gas concrete, brick, masonry surfaces, such as thin cracks filled, cast, engraved, broken, broken surfaces, 1-5 mm is suitable for repair and plaster repairs.

• Restoration in building, painting, ceramic coating, providing a smooth surface prior to isolation.

Technical Specifications • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Before application, dampen the surface to get a better result or Maxicoll surface should be primed with Primer.

• Appearance Gray: colored powder • Shelf Life: 12 months in original sealed packaging

Thick REPAIR OF HIGH STRENGTH FIBER REINFORCED REPAIR MORTAR

Application Specifications Application Temperature : (+5 ° C) - (+35 ° C) Mixes Rate Cap: 5.5 to 6 it water / 25 kg powder Life Application: Max. 5 mm (one coat) thickness Consumption: 1.5 to 2 kg/m2 (1mm thickness) Usage time: 6 hours Performance Specifications Compressive Strength (EN 12808-3) Flexural Strength (EN 12808-3) :> 13.0 N/mm2 (28 days) Adhesion to Concrete (EN 1542) : Temperature Resistance :> 4.0 N/mm2 Restrained shrinkage-expansion (EN 12,617 to 4) : 1 N/mm2 (-30 ° C) - (+80 ° C) Capillary Water Absorption (EN 13 057) :> 0.8 N/mm2 Flammability (EN 13501-1 : <0.5 kg/m2h0, 5 A1 Application Instructions • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Prior to application, the surface should be dampened or primed with Maxicoii to get a better result.

• 25 kg Maxicoll Repair Mortar should be added to 5.5 to 6 litre of water slowly and should be mixed to derive a homogeneous mixture. This process should be done with a low speed mixer. Any additions should not be included not mentioned in the procedures. .

• Prepare mortar, wait for 5-10 minutes to mature . Before reapplication, stir for 1-2 minutes.

• • The surface must be smoothed with a wet sponge.

• After application, the surface should wetten for 24 hours from time to time. In ideal weather conditions and with normal absorption it should be waitted for about 6 hours before the ceramic coating on a surface, this time is shorter in the summer, longer in the winter months. restart the application againhumiditise• The mortar should be used within 60 minutes.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water Warnings • Do not inhale cement dust, Avoid contact with skin and eyes.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment.

Packing: 25 kg bags.

Quality Certificates TSEK Public Works Item No: 04.61331

DECORATIVE PLASTER

Construction Chemicals Decorative Plaster

Product Description White cement based, one-component, polymer modified, applied with a trowel, mineral textured decorative finish cladding.

Application Areas • coat decorative coating material for thermal insulation systems, • Interior and exterior wall plaster is used on.

Features • Easy to apply, excellent adhesion.

• Decorative and a homogeneous-looking application.

• Thermal insulation systems, applications, wavy appearance can be corrected.

• Water and frost resistant.

• resistant against external influences and protects the structure for many years.

• Water vapor diffusion and allowing the structure to breathe.

Exterior decorative plaster can be applied on all types of thermal insulation panels and top coat plastering mortar

Technical Specifications Appearance Powder: White, ivory and beige-colored granules: 1.55 kg / lt.

Density of water Mixing Ratio:: 6 to 6.5 lt. 25 kg. dust Resting time: 2-3 minutes Pot Life: 1.5-2 hours Approximate Application Temperature: +5 ° C and 35 ° C Application thickness: About 2 mm.

Consumption: 3 kg/m2 (may vary depending on the application surface.)

Temperature Resistance: -20°C / +70°C Full Cure Time: 1-2 days Application Instructions 25 Kg bag, with 6 to 6.5 kg of water is mixed with a low speed mixer. Apply water for Pre-saturate the surface with a trowel. Aerated concrete, Ytonghigh walls of water absorption, such as pre-Maxicoll primer.Avoid application when Temperatures below 5 ° C and 35 ° C.. Apply without a possible break, interruption.if necessary divide the surface areas of about 20 m2. Apply separately. Plastic trowel application at least 10 min. are allowed to film on the inside through the plaster, when there is risk of freezing within 24 hours or direct sun and wind. Avoid application in public areas. After the application until the cement plug (about 1 week) Please note that there is no snow or severe cold. Do not use the expired mortar absolutely dust and water addition. Product should not be applied on a horizontal surface in the rain.

Packaging: 25 kg. 'Kraft bags Shelf Life: Humid conditions and unopened package with 10-fold stacking on pallets can be stored for 6 months.

Warning Handling and storage of food products during the occurrence of a cement-based, skin, eyes and mouth should be avoided. swallowing accidentlyconsult a doctor. In case of Contact with skin, rinse immediately with plenty of water. Maxicoll technical support, or for more information, please contact Technical Support.

POLYMER THIN REINFORCED CEMENT-BASED PLASTER

Construction Chemicals Plastering Mortar Thin

Fiber reinforced autoclaved aerated concrete brick interior and exterior facades SIV is applied as a thick pumice on the block

Product Description With the aim of creating fine plaster was prepared containing polymer additives, cement-based plaster mortar.

Application Areas Rough plaster on interior and exterior walls as thin plaster, exposed concrete repair features disorders Consists of fiber-reinforced polymer.Excellent adhesion and easy to implement.Cracking.Flexible.The image of gypsum plaster.Can be painted over. Processing time is long. Hand and machine and separate types to apply. Primer for use on exposed concrete use of Maxi-HOLD Promotion.

MIXING: a bag, with a low speed mixer for 3-4 minutes with 6-7 L of water are mixed. Rest for 5 minutes.

Repeat for 1-2 minutes.mixed material should be used within 2 hours.

APPLICATION: Apply water for Pre-saturate the surface with a trowel. or machine, if desired plaster surface is smoothened with a wet sponge. Slightly dampening the surface with a steel trowel or polishing can be done. İmproved cement with water in hot weather Technical Specifications Type: Cement based powder mortar Color: Concrete Gray Density: 1.5 to 1.7 kg / Push Mixing ratio: 25 kg Maxicoll fine plaster: 6-7 liters of water Application temperature: +5 ° C / +30 ° C to TS EN 998-1 Application time: Approximately 45-60 minutes (25 ° C) Consumption (depending on the surface): 1.5 to 1.7 kg/m2 (1mm thickness) Packaging: 25 kg paper bags STORAGE: Moisture resistant bag, sealed and be stored properly in dry conditions. Shelf life in original packaging for at least 6 months, respectively.

WARNING: Cold (<5 ° C), hot (> +30 ° C) weather conditions should not be applied. Hazards and safety precautions: Use protective goggles and gloves when working. necessaryThe measures for the material to lose use water rapidly In case of contact, rinse with plenty of water. Do not breathe dust from cement, Avoid contact with skin and eyes. Do not add any additives not mentioned in the Application Instructions. Store in a dry medium up to 10. The above values at 23 ° C ± 2 for the enviromental conditions of temperature and humidity were 50 ± 5%. These values may vary depending on enviromental conditions. Maxicoll technical support, or for more information, please contact Technical Support.

POLYMER THIN REINFORCED CEMENT-BASED PLASTER

Construction Chemicals Plastering Mortar Thick

Fiber reinforced autoclaved aerated concrete brick interior and exterior facades SIV is applied as a thick pumice on the block

Product Description With the aim of creating fine plaster was prepared containing polymer additives, cement-based plaster mortar.

Application Areas Rough plaster on interior and exterior walls as thin plaster, exposed concrete repair features disorders Consists of fiber-reinforced polymer.Excellent adhesion and easy to implement.Cracking.Flexible.The image of gypsum plaster.Can be painted over. Processing time is long. Hand and machine and separate types to apply. Primer for use on exposed concrete use of Maxi-HOLD Promotion.

MIXING: a bag, with a low speed mixer for 3-4 minutes with 6-7 L of water are mixed. Rest for 5 minutes.

Repeat for 1-2 minutes. mixed material should be used within 2 hours.

APPLICATION: Apply water for Pre-saturate the surface with a trowel. or machine, if desired plaster surface is smoothened with a wet sponge. Slightly dampening the surface with a steel trowel or polishing can be done. İmproved cement with water in hot weather Technical Specifications Type: Cement based powder mortar Color: Concrete Gray Density: 1.5 to 1.7 kg / Push Mixing ratio: 25 kg Maxicoll fine plaster: 6-7 liters of water Application temperature: +5 ° C / +30 ° C to TS EN 998-1 Application time: Approximately 45-60 minutes (25 ° C) Consumption (depending on the surface): 1.5 to 1.7 kg/m2 (1mm thickness) Packaging: 25 kg paper bags STORAGE: Moisture resistant bag, sealed and be stored properly in dry conditions. Shelf life in original packaging for at least 6 months, respectively.

WARNING: Cold (<5 ° C), hot (> +30 ° C) weather conditions should not be applied. Hazards and safety precautions: Use protective goggles and gloves when working. The necessary measures for the material to lose use water rapidly In case of contact, rinse with plenty of water. Do not breathe dust from cement, Avoid contact with skin and eyes. Do not add any additives not mentioned in the Application Instructions.

Store in a dry medium up to 10. The above values at 23 ° C ± 2 for the enviromental conditions of temperature and humidity were 50 ± 5%. These values may vary depending on enviromental conditions.

Maxicoll technical support, or for more information, please contact Technical Support.

READY PLASTER ACRYLIC FELT AND STYROFOAM

Construction Chemicals Plaster Styrofoam

Product Description: • Acrylic-based, ready to use Acrylic Felt and Styrofoam Lord Shiva ..

• All interior and exterior surfaces of buildings suitable kuilanıma plastering acrylic putty.

Application Areas: • Izoboz Pad, Polyfoam, Poiysitren and built to Milled Surfaces.

• Milled Wood surfaces are used to.

• Drywall surfaces are designed to be included in the. Dust does not.

• Inhalation feature allows the wall to throw out the moisture.

Technical Specifications: Colors: White Density: 1.65 kg/m2 Consumption: according to the state of the surface -1.750 1.250 kg/m2 Packaging: 5 kg Shelf life: unopened original packaging 8 months

Plaster Jacketing Splinterproof & water repellent EPS - XPS - For Glass Wool, Stone Wool

Application Instructions: Applied to all kinds of surfaces, dust, grease, dirt, glue, foreign objects and so on. ¬ sheets should be cleaned. Application will be made in advance surfaces should be masked. According to the state of the surface plaster mesh with the aim of strengthening the corner profiles, and so on. It is recommended the use of reinforcing materials. Ready to use a paste type, but if necessary can be diluted with water at a rate of 1-2%. Can be applied by spray or trowel.

Warnings: • Avoid direct contact with skin. In case of contact, wash skin with plenty of water.

• Do not add water or any other additive. Item 5 ° C - 23 ° C. Keep.

• Keep out of direct sunlight to Maxicoll technical support, or for more information, please contact Technical Support.

SUPER ELASTIC WATER INSULATION MATERIAL Cement - Concrete and Mortar Surfaces Acrilic applicable Elastic Water-Based Insulating Material

Construction Chemicals Super Elastic Water Insulation Mortar

Foundations, Retaining Walls, Terraces, Balconies, Pools Tanks and Basements For Curtain

Two Component

Super Elastic Water Insulation Mortar

Product Description SUPER ELASTIC, cement-based, two-component, polymer-modified structure that protects against cracking, high adherence, shrinkage and shrinkage-resistant insulation material Application Areas Most likely to stretch the effort to discourage any kind of load in reinforced concrete structures, water tanks, basic bundling, basement walls, terraces and balconies, wc, bathroom, balcony, To create a horizontal and vertical surfaces such as wet areas, swimming pools, a water impermeable layer under the screed and ceramic coatings.

Features The elastic property is high, adherence is excellent. Shrinkage and cracking, positive water pressure, applied to the interior and exterior. Suitable for use with synthetic fibers or glass fibers. Prepared Consistency sholudbe applied with brush or trowel. Be applied by spraying, after use resistant to frost and corrosive salts, applied on moist surfaces. It is not corrosive, or ceramic coated with plaster .the drinking water storage is also available, free of toxic substances.

Application Surface Preparation: Surfaces must be clean. chamfer the corners, air holes and loose particles that reduce adherence should be cleaned mechanically. Absorbent surfaces should be saturated.

Mixing: Clear liquid component in a container on the dust component is added slowly, should mixedwith a low-speed mixer fora homogeneous mixture. Consistency of the material change according to the amount of fluid module . Component B is sufficient to use 90% applications are made with a trowel.

Application Method: Surface defects repaired with Maxicol whether thin or thick repair mortar surface After satureted with water, damp, the first coat is applied.For Hardening of the material Wait approximately 3-5 hours after the second coat is applied. For each floor equal thickness of the material to be spread to all surfaces.IfThe weather is hot or too windy measures should be taken.

Coverage: 2.5 to 3 kg/m2, depending on the application surface (two-floor) (A) Module powder, (B) Module liquid dark gray (after mixing) (A + B) mixture 1.65 kg / L of 20 ° C for 60 min. 5 min 2 N/mm2 7 bar positive 2 days 7 days Min through out the coating application. After 3 days * CAUTION: Do not brush a coat if the application thickness is 2 mm, trowelshould not exceed 5 mm.

Must not be left in direct sunlight or ceramic coated with a protective screed. The first 24 hours of outside applications, direct sun, wind, frost and rain protection is required.

PACKAGE & STORAGE: A module of 20 kg.'Health moisture-resistant paper bags, B module 10 It.' ² canisters. Moisture-resistant bag, closed and stored in dry conditions for at least 12 months. Module B. Protect from frost.

WARNING: cold (<5 ° C), hot (> +30 ° C) weather conditions should not be applied. The material must be avoidedto lose water rapidly. Use protective goggles and gloves when working. In case of contact with skin, wash skin with plenty of water. In case of contact with eyes, immediately consult a doctor.

MAXICOLL technical support, or for more information, please contact Technical Support

SEMI-INSULATING MATERIAL ELASTIC WATER Cement and Concrete and Plaster Surfaces Applied Semi-Flexible Acrylic Waterproofing Materials

Construction Chemicals Semi Elastic Water Insulation Mortar

Product Description Maxicoll semi-elastic, the old and the new two-component cement-based surfaces, water insulation material that can be applied internally or externally.

Application Areas Terraces, balconies, manhole, basic insulation, basement walls, floor and under ceramic tiles, concrete pipes, sewage pipes, wc, known to be used in wet areas such as bathrooms.

Features Creates a semi-flexible impermeable layer, excellent adherence.Applied to horizontal and vertical.Applies to increase the durability of the structure against external influences. Prepared consistency shouldbe applied with brush or trowel, spray. Can be applied to damp surfaces. It is not corrosive, that the above ceramic coated with cement, plaster can be done, in drinking water tanks can be used, does not contain toxic substances.

Kitchen Bathroom With Shower wc Exposed to Water and Moisture for Exterior Walls

Two Component

Application After satureted with water, damp, the first coat is applied.For Hardening of the material Wait approximately 3-5 hours after the second coat is applied. For each floor equal thickness of the material to be spread to all surfacesCoverage: Depending on the application surface 2 to 4 kg / m Technical Specifications Type: (A) Module powder (B) Module fluid: Dark Grey (after mixing) color Density: (A + B) mixture rest Time: ,70 kg/It : 20째C'de 35 dk adhesion: : 5 dk Water pressure resistance strength: 2 N/mm2 : 2 bar pozitif Mechanical Resistance water tightness: 2 days: 7 days Min through out the coating application. After 3 days *

Semi Elastic Water Insulation Mortar

ACRYLIC-LIQUID Liquid consistency by applying elastic Applied Waterproofing Material Product Description Acrylic copolymer based, single component that can be applied by brush or roller flexible waterproofing material. Acryliquid, ready to use in liquid form, water can be applied on concrete, plaster and insulation, economical, that the exact solution, easy to apply insulation material.

Application Areas • Straight or inclined floors, terraces and balconies • Concrete water transmission channels • All types of water tanks • facade of the building Features • Application-ready • Extremely elastic • Resistant to sunlight • Excellent adhesion to • Easy to use, labor saving • Very economical • Solvent free. Diluted with water • create additional location.

Application Surface preparation: Surfaces must be clean. Loose parts should be cleaned mechanically or by air.

Metal surfaces must be free of rust and layers of fat. Maxicoll surface defects corrected with repair mortar should be chamfered corners. Measures Must be taken to extreme weather conditions.

PRIMING: Concrete on certain Acryliquid applications with 1/1 ratio should be diluted with water in a coat of primer. (200 g/m2) APPLICATION: After the primer has dried, max. 1 to 1.5 mm. Acryliquidshoouldbe applied by brush or roller to form a thick, optionally applied 2 or 3 times. Be sure The prior coat is fully dry between layers.

The application should be one-way, the application of the next layer should be.in the direction perpendicular to the previous direction CONSUMPTION: ICN 1.25 kg each floor. / M2 should be Technical Specifications Type: Acrylic copolymer liquid Color: White (optional Gore colored) Density: 1.65 kg / l Packaging: 15 kg. 'Plastic buckets of STORAGE: 12 months stored in a cool and dry place. Protect from frost.

CAUTION:Do not apply in rainy weather. In practice, for each floor max.thickness 1.5 mm. Do not apply on wet surfaces. Walkable surface application , the necessary measures should be taken.

WARNING: Cold (<5 ° C), hot (> +30 ° C) air conditions sartlannda should not be applied. Use protective goggles and gloves when working. In case of contact with skin, wash skin with plenty of water. In case of contact with eyes, consult doctor immediately for assistance or more information please call Technical Support MAXICOLL.

PRODUCT DESCRIPTION Rubber-bitumen-based, solvent-free, single-componentelastic waterproofing material, one-component, solvent-free, elastic, covering high, cold-applied rubber - bitumen emulsion coating.

Application Areas All kinds of concrete structures under the ground soil moisture, rain and against the positive waterproofing of underground waters, retaining walls, the walls in contact with the soil surface, terraces (with the proviso that more protection), Thermal insulation panels bonding, bonding of all types of water isolation, protection plates, as a vapor barrier, insulation Septic tank and settling tanks.

Features Easy to apply, ready to use product, apply with a brush or spray machine, dry and wet surfaces can be applied, seamless, , moisture and creates a layer of water-proof, because of the high flexibility of coverage and reinforced concrete walls are plastered surfaces easily, Thixotropic, vertical concrete surfaces sag. Solvent-free, non, highly resistant to soil acids and salt solutions , resistant to freezing and thawing.

APPLICATION: Do not apply in the rain or if the possibility of looting. Cold joints, corners and edges, while the first floor freshly laid 50 g/m2 ,file should be strengthened. Surface Preparation: Surface must be clean, loose particles must be removed and the environment should be clean. Free water should not be pooled on the surface. Surface defects, voids must be repaired with repair mortar Maxicoll fine.

Mixing: The material is a single component with its own low-speed embedderItshould be homogenized 2-3 minutes by stirring.

Floor Coating: Maxi-Bitum does not need primer before applying. However, in special circumstances the desired 1 cup of Maxi-bitumen primer, thinned with 2 parts water, applied with a brush. Use a brush or trowel. Material to be kg/m2 1.2 m2 spread over the surface with a brush. With the first layer of 3 mm trowel application is taken with notched trowel. İmproved material (3-4 hours later) and then perpendicular to the first floor with a brush or a flat trowel second coat is applied.

Spray Application: With the supply pressure 4 bar spray pressure 2.5 bar 1.2 kg each floor with highviscosity spraying equipment, wait drying between the coats. Equal thickness for each layer of material spread on all surfaces should be considered.

Technical Specifications Color: Black Consistency: Brush - troweldark viscous liquid.

Density: 1.2 kg / cm3 Coverage: Depending on the application surface (1.2 to 2.5 kg/m2 (on two floors) 3 Drying time: (2-4) days (3 mm film thickness) Adhesion: Concrete and timber very well Application Temperature Range: + 5 - + 40 ° C Shelf life: 12 months in unopened packaging in cool dry place.

Storage: Protect from frost.

Packaging: 15 kg plastic bucket CAUTION: It should be applied two times for certain impermeability. The application should be between + 5 to + 40 ° C, lower or higher enviromental temperatures should be expected to the appropriate temperature. The first 24 hours of applications directly to the outer surface of the sun, wind, rain, frost and must be protected. Avoid contact with water, the material is fully improved. Tools must be cleaned with water immediately after use. Spraying machines should be cleaned with thinner. Dry material can only be mechanically removed.

WARNING: During the application, work clothing, protective eyewear, gloves should be used. Of unimproved material in contact with skin should be washed with plenty of water. If swallowed or in case of contact with eyes, consult a doctor immediately. MAXICOLL technical support, or for more information, please contact Technical Support.

NEGATIVE CRYSTALLINE WATERPROOFING MATERIAL Product Description

Construction Chemicals Negative Water Insulation Mortar

Negative application pools, water treatment plants, water tanks, roofs, foundations, basement parking lots, tunnels, retaining walls, concrete pipes

NEGATIVE MAXICOLL applied to the surfaces of brick and concrete buildings, old and new cement-based waterproofing material in order to provide waterproofing, . Converts Chemicals into the crystal structure by MAXICOLL reaction prevents the passage of water and permanently settled in the capillary spaces provides waterproofing.

Application Areas • Water tanks • Pools, Water treatment plants • Dams, Canals, Harbors • Drainage Pipes • Concrete pipes • retaining walls, basement walls • Foundations, Roofs • Construction joints. Concrete Grain storages • Parking garages used for all structures Technical Specifications Color: Black Consistency: Brush -– trowel dark viscous liquid.

Density: 1.2 kg / cm3 Coverage: Depending on the application surface (1.2 to 2.5 kg/m2 (on two floors) 3 Drying time: (2-4) days (3 mm film thickness) Adhesion: Concrete and timber very well Application Temperature Range: + 5 - + 40 ° C Shelf life: 12 months in unopened packaging in cool dry place.

Storage: Protect from frost.

Packaging: 15 kg plastic bucket Mixing:Water / MAXICOLL NEGATIVE: 1/2, 5 volumetric ratio is required. Enough Water is always added to the material. . Within 20 minutes after material prepared is to be used.

Application: For the syrup soaked concrete surface so that the total flow rate of 2 kg/m2, applymany times with a brush. Each layer in the direction perpendicular to the previous, but lose withthe water before the previous coat is applied after improvedenough. After the application, in order to accelerate the crystallization and penetration the surface should be kept wet for a period of one week. Thus, crystallization is accelerated.

CONSUMPTION:Min. 2 kg / m 2 should be used. PACKAGING AND STORAGE: 20 kg moisture-resistant bags, sealed and stored in dry conditions.

WARNING:Use safety goggles and gloves. In case of contact with skin, wash skin with plenty of water. In case of contact with eyes, immediately consult a doctor. MAXICOLL technical support, or for more information, please contact Technical Support.

SURFACE CAPABLE OF HEAT AND SOUND INSULATION - THERMO-MAXI Construction Chemicals

Product Description Lightweight reinforced special agregaiar and chemicals, plaster is prepared in the form of heat and sound insulation and can be applied to a single-layer plaster.

Application Areas In need of all types of thermal and acoustic insulation plaster is used on the wall of inside and outside.

Old plaster surfaces may be used. White-colored plaster are water-repellent.

Heat and Sound Insulation Material

Technical Specifications • Light weight due to the extra load on the structure • Single-layer is applied does not require extra labor • does not allow the formation of thermal bridges •that provides thermal insulation, heating and cooling costs contribute to the budget • due to the porous structure provides sound insulation.

• Inorganic material because it is based on the environment and does not contain chemicals that are harmful to human health • Preparation and easy to apply. Prepared and mixed with water and applied Type: Perlite aggregate, cement and plaster Color: White / Grey Pack: 15 kg. 'Bags with Dry powder Density / Wet mortar density: 0,35 g/cm3 0,95 g/cm3 Participate in Water Quantity: 9-13 liters of water / 15 kg. bag Propagation of fresh mortar: (143-144) mm (1% deviation) Thermal conductivity coefficient: 0,087 W/mK - 0,0075 kcal/hm2 audioinsulation value: (1,5 cm/500Hz) u Water Vapor Permeability: W1 ( 0,4 - 0,5 ) kg/m2 Consumption: 5.5 -6) for 1 cm thickness kg/m2Definitely does not burn. flame-proof Application Surface Preparation: dust, oil and impurities from the application surface should be cleaned. Loose parts are cleaned by mechanical means until you reach solid ground. By the method of chipping the surface of the painted surfaces, roughen surface by increasing the adherence to strengthen the plaster will be in contact. Absorbent and slippery surfaces must be primed with the surface MAXICOLL Gross CONCRETE PRIMER. Mixing: THERMO-MAXI thermal-acoustic insulation plaster, mechanical stirrer all in one 15 kg bag is between 9-11 liters of water poured over the material.3-4 minutes, until it becomes homogenous mix.

Because the material will start to solidify at the time waiting at the application, 2-3 minutes stirring mechanically before re-usedwithout adding water Application: Plastering machine or steel trowel applied in two-centimeter mixtures. Slightly wetting the surface of the material to be applied will ensure better adhesion to the surface.

WARNING: Operating guards goggles and gloves. In case of contact with skin, wipe it with water before drying. In case of contact with eyes, seek medical advice immediately. + 5 - + 35 oC Apply.

Technical support, or for more information, contact the technical service of building chemicals MAXICOLL

MORTAR GROUT AND ANCHOR ASSEMBLY

Construction Chemicals

Mortar Grout and Anchor Assembly Freezing time is 5 minutes

Product Description Cement-based self-compacting is extremely fast and the outlet, the road can be opened to traffic in about 1-2 hours (depending on the amount of water) repair and grout.

Application Areas opened to traffic areas, manhole covers repairs and upgrading works, city furniture anchoragefixxingtraffic signs. concrete open spaces repair like Road, track and vehicles or pedestrian traffic. Repair of hollow cavities and cracks.

Features • Use only the addition of water is used, the application is extremely easy.

• is capable of self-propagation.

• Extremely fast setting the road openning to traffic takes about 1-2 hours (depending on the amount of water).

• Consistency can be adjusted.

Application Surface Preparation: Surfaces must be clean, sound, air or mechanical parts must be cleaned of loose mortar poured in the field. Before application, the surface should be saturated.

MIXING: Surface preparation should not be mixed with complete mortar i. Recommended mixing water should be placed on the mixer then runthe mixer. drill mixer connected to the end of the mixing process can be used. Maxi-GR0UT 70 bags should be added to water quickly and without interruption. Package must be continued to stir for 2-3 minutes and then drained. Hare thoroughly intermixed, be careful not to lump in .Application Method: Mix and then pour witha continuous movement to the surface, the air blistersshould be taken to the surface. Maximum application thickness at a time should not exceed 10 centimeters.

CAUTION: Do not plug the material at high temperatures, application duration and pans will be shortenedlife.

PACKAGING: 25 kg moisture resistant. Light polyethylene bags STORAGE: 12 months in closed and cool.

DOSAGE: 1 M3 CHARGES TO 2000 KG 25 KG POWDER POWDER PRODUCTS PRODUCT 3.5 - 4 liters. WATER. Technical Specifications Type Colour: Cement based powder hare Grey Unit-off weight: 2.00 kg / l Compressive Strength :0-15N / mm2 (1 hour) 20-25 N/mm2 Mentioned above, this information VALID FOR TEMPERATURE 25 0C. WARNING: cold (<5 ° C), hot (> 30 ° C) weather conditions,During thethe application protective eyewear and gloves should be usedThe necessary measures must be inforcedfor the material to lose water rapidly In case of contact, rinse with plenty of water. In case of contact with eyes, immediately consult a doctor.

MAXICOLL technical support, or for more information, please contact Technical Support.

MAXI-GROUT - 40 Cement-Based, Self-compacting, smooth mortar shrink without expandin Construction Chemicals

Product Description Maxi-Grout-40 multi-strength self-compacting expanding grout without shrinkage. Maxi-Grout-40, ready to use, only water added in powder form, smooth consistency, where the non-biodegradable shrink dip in fresh and hardened mortar blocked grouting. Impermeable and resistant.Very strong adhesion to steel and concrete. Metal, aggregate and does not contain chlorine.

A full 24 hours freezing time

Application Areas Steel constructions, gas and steam turbines, generators, compressors, pumps, , mills.

Cranes, crushers, marble cutting machines to fill the gap between the base plate and the foundation, prefabricated structures, columns, cracks, voids and cavities. Combination of column and beam concrete facadecurtains, floor repair concretes.

Features The cone experiment with a mixture of 20% water 25 to 35 sec.super fluid flow, non-shrinking grout is obtained. Water vomiting were observed. The tests show that there is 0.3% expansion.These values are below the maximum limits permitted by the standards. Max-Grout-40, expansion consists of both plastic and early hardening period and is completed within 12 hours. Within 20 Max-Grout-40 samples, even under atmospheric pressurethere was not leak water.

Mortar Grout and Anchor Assembly

Application Preparation of foundation: before placingconcrete if the the machine is looseroughening bolt and base plate surface using a chisel surfaces.shoyld be usedDamaged regions and the particles should be discarded, sherbet future contaminated oil, grease, dust and affect the performance of grout must be cleaned of all foreign matter. After Placed in the machine set on the location and scale, it should not be changed position. Setting chock (Names), then gently removed for the grout to prevent sticking. The machine after installation and adjustment works, syrup pouring foundation concrete saturated with water for at least 6 hours before reuse. the remaining watershould be removedfrom Wetted surfaces,.

Preparation of molds: molds, to suck and leak-free water should be a solid material, the process must be installed to withstand forces during the encounter. Shares up to 5 cm in all other sides are sufficient.To obtain a flow of grout pressure casting mold according to the situation at the height should be considered.

MOUNT ANCHOR GROUT and MORTAR Mixing: Recommended mixing water should be placed on the mixer and the mixer run. atend of the mixing process drill mixer can be used. To Max-Grout-40 bag,water should be added quickly and without interruption. after 2-3 minutesof Package discharged, keep stirring. Mortar thoroughly intermixed, be careful not to lump in.

Application Methods: Sorbet dump should be continuous and vibrator should be used. prevent the spill from one side only is sufficient. on both sidesMutual certainityshould not be cast. Grout between the base plate and foundation must be completely filled. Surfaces exposed to water loss through evaporation should be protected for a period of at least 24 hours. +5 ° C - +30 ° C. is recommended to practice. For expansion of the material after casting min. İmproved 7 days.

DOSAGE & CONSUMPTION: 25 kg powder product, 3-5 lt. water. / 1 m3 of about 1900 Kg powder material.

PACKAGE & STORAGE: 25 Kg. 'Light water-resistant paper bags. / Moisture-resistant bag, closed and stored in dry conditions for at least 12 months.

WARNING: At cold (<5 ° C), hot (> +30 ° C) weather conditions it should not be applied. The measuresmust be taken not to lose water rapidly. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor. MAXIC0LL technical support, or for more information, please contact Technical Support.

SURFACE CURING Quartz Aggregate for Industrial Flooring Surface Hardener

Construction Chemicals Surface Curing

For aircraft hangars exhibition factory warehouse parking garage

High Strength

Product Description It is used for floors to protect against bumps and abrasion,it is applied to the surface of fresh concrete and screed surface of quartz aggregate hardenerhydraulic binder and additives. Inorganic color pigments used in color Maxicoll Surface Hardener is resistant to alkalis and the light of day.

Application Areas Maxicoll Surface Hardeneris useful for light and medium weight traffic roads and increase the wear resistance of the surface that is used to prevent dusting, factories, textile workshops, car parks, warehouses, loading and unloading areas, workshops and garages, supermarkets and in areas where pedestrian traffic is heavy.

Features According to the normal concrete used for surface resistance increaseMaxicoll Surface Hardener 2-4 fold.

For Impact, abrasion-resistant.High level of impermeability.It prevents dusting of concrete and easy to clean. Concrete surface, low water / cement ratio is higher because of the compressive strength.

Industrial surface cleaners, motor oil, mineral oils and can be applied indoors and outdoors. Different application methods for textured surface (printed concrete) can be obtained Application Concrete Casting: For concrete forms, concrete is poured into the preparation. Screed rails placed in the mold for the concrete surface is corrected with the control gauge. If necessary, a correction can be done with a wooden trowel last.

Surface Hardener Application: The application should not be too dry or too wet for concrete surface.

Surface hardener must be wet enough to hold the moisture needed. Ifconcrete surface drieshardener will not join with the concrete floor.if the surface is very wet surface hardener will not be at necessary strength and durability. Therefore, if the surface water should be taken.pressed 2-3 mm deep socket on the concrete has left its mark at the appropriate time for the implementation of Maxicoll Surface Hardener.

Amount of surface hardener applied to the area around the concrete forms Maxicoll Surface Hardener packages brought to the surface with hand or mechanical spreader as a homogeneous discarded. First taking water from the concrete surface hardener, then wait for the color change of the material for concrete integrationpolishing disk is provided with. 5 kg / m 2 or more applications of the material before the 2/3 u sprinkled the rest of the disk operation after the third amount of disk material laid again smoothed. Rough polishing process is completed, the desired brightness is achieved after the last pressurizedmaking fine adjustments must be made by a knife. During the application, the surface water sprinkled definitely.

Curing: The application of hydration within 1 hour of the end of the evaporation of water from the capillaries to prevent shrinkage cracking of concrete to increase the strength of the material should be protected with surface treatments.

Grout joints and Cutting: 1-3 days should be in the joint sector. Joints should be filled with an appropriate joint sealant (moisture of the concrete grout sealant when it comes to any level).

Technical Specifications Aggregate Compressive Strength: 70-80 N/mm2 Hardness: 6-7 MOHS scala Impact Resistance: 40-50% weight loss [2000 cycle) Color: Concrete Gray, Red, and Green Coverage: Depending on the traffic load and 3-8 min 5 kg/m2 kg/m2 color should be used in applications.

PACKAGING AND STORAGE: Maxicoll Surface Hardener 25 kg moisture-resistant. 'Of paper bags.Protected and dry place, shelf life of at least 6 months.

WARNING: cold (<5 째 C), hot (> +30 째 C) weather conditions and should not be applied. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor, technical support or for more information, please contact Technical Support MAXICOLL

SELF-LEVELING SAP Cement-based, self-leveling floor leveling mortar Product Description Maxicoll self-leveling screed, taking mortar used to fix an uneven concrete floor. One-time 1-30 mm thick can be applied, polymer modified, cementations screed mortar cracking and shrinkage.

Construction Chemicals Self Leveling Screed

Application Areas Correction of uneven and rough concrete, precast concrete surface correction, carpet, ceramic, natural stone, hardwood, marble, hardwood, vinyl and used for correction of the surface before application of coating materials, such as PVC. Features Self-leveling. Shrinkage and cracking does not occur. Also applicable to external weather conditions.Fast improving.

Application Surface Preparation: Surfaces must be clean. Reducing the adherence loose parts should be cleaned with mechanical or air. Iron surfaces of rust, oil and grease, and dust There is no need linningcleanning and high quality concrete.

The basis of polymer reinforced rapid setting cement

Lining Saturated with water for a few hours before application.during application should not beStanding water. to ensure adherence and insulating purposes, of Absorbent, or very smooth surfaces to receive air from the bottom Maxicoll Ade surface should be applied primer bonding agentto be grouted, or applied with a rollerbefore the application .Thoroughly cleaned. Surfaces holes and cornersshould be repaired with repair mortar.SurfaceMaxicoll, the area to be treated and prevented air flow should not be applied under the sun.

Mixing: a clean container 6-7 lt. dust component is added to the water slowly on a low-speed mixer for homogeneous mixture . After waiting a minute or two until the mixture becomes homogenous mixing.

Application: to obtain the desired thickness The prepared mixture is applied to the surface, with a trowel or squeegee. Spilled material should be removed with a spiked roller. Maxicoli self-leveling screed to establish in order to prevent rapid curing, during the high temperature, direct sunlight, and measures should be taken against the wind.

Technical Specifications Type: Cement essence, i dust Color: Dark gray Density: 2.0 kg / Push Traceability: 20 째 Cde35dk.

Coverage: 1 mm thickness (1.5 - 2) kg / m2 PACKAGING: 25 kg moisture-resistant paper bags.

WARNING: Surface and enviromental temperature must be a minimum +8 째 C. MAXICOLL technical support, or for more information, please contact Technical Support.

COARSE ALUM FLAT Cement and mineral filler based, liquid screed.

Construction Chemicals Rough Circle Alum Component-A

Floor leveling mortar

Coarse sand filling is placed in a self

Application Areas indoors and outdoors, and narrow areas difficult to reach, as a rough screed structure is a comfortable way with the machine.

Features Appearance: White Powder Packaging: 25 kg paper bags and 40 kg bags offered with Aggregate. Suitable for use on floors with underfloor heating, high compressive strength and tensile cracks freezes the ability to Soft consistency, easy to apply Water, frost and resistant to adverse weather conditions Hydraulic is capable of binding Long-lasting Fireproof Technical Specifications Particle size distribution: 0-8 mm Application thickness: 25-100 mm Participate in the amount of water: 5 - 5,5 It (40 kg dry mortar) The recommended application of the external environment temperature: +5 째 C to +35 째 C Applicable time: 1 hour (approx) Hardening and freezing time: 4 to 12 hours Use opening time: 24-48 hours Compressive strength:> 30 N/mm2 (after 28 days) Coverage: 10 mm thickness of about 20-22 kg/m2 dry mortar Storage Dry mortar bags,prevent water, frost and severe weather conditions. They should be kept cool and dry on wooden pallets. Torn and opened bags should be closed immediately and consumed first. More than 8 bags should notbe stacked on top of each.

Provided that comply with the above-mentioned conditions maintained for 1 year with a maximum storage life.

WARNING: Cold (<5 째 C), hot (> +30 째 C) weather conditions and should not be applied. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor.

MAXICOLL technical support, or for more information, please contact Technical Support

MAXI-HOLD PROMOTION PRIMER Resin-based solvent-free promotion Product Description This will be held on concrete and similar surfaces smooth and shiny to enhance the sticking regime acrylicbased promotion (adhesion promoter) material.

Features Solvent-free.Environmentally friendly. Fluency is easy to apply and easy opportunity to apply promotion has the power to high gloss and flat on the ground.

Application Areas Plain bright gross concrete surfaces, tile, ceramic, tiles, top Applications, Terrazo, sandstone, clinker, flat and dense concrete floors.cement screeds and intense staining of coatings applied on synthetic.

Technical Specifications Colors: Red Density: 1.6 kg/m2 Consumption: state of the surface (150-250) g/m2 Application Tool: Brush, roller Packing: bucket 15 and 5 kq first Shelf Life: 1 year original unopened packaging Applıcatıon Instructıons: Applied to all kinds of surfaces, Dust, grease, dirt, glue, foreign objects and so onmust be removed. From layers. MAXI_TUT primer should be mixed thoroughly before use. Thinning can be done with water. The surface should be applied by roller or brush. One day after application, depending on weather conditions, or other materials that can be applied after drying on. Increased by the addition of a little water in the packaging material, the packaging can be stored in tightly closed.

Cleaning of tools: All the team should be washed with water immediately after application. WARNING: Cold (<I ° C), weather conditions should not be applied. Do not add any additives not mentioned in the Application Instructions. Keep out of the reach of children. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor. The above values of temperature and P at 23 ° C ± 2 to ± 5 moist enviromental conditions are given. These values may vary depending on enviromental conditions. Store in a cool and dry environment. Protect from frost.

MAXICOLL technical support, or for more information, please contact Technical Support.

RESIN-BASED SOLVENT-FREE PROMOTION MATERIAL Product Description Which will be held on smooth and shiny surfaces like plaster and resin-based promotion acrylicapplicationsto enhance the sticking (adhesion promoter) material.

Features Solvent-free.Environmentally friendly.For its Fluency is easy to apply and easy opportunity to apply.ithas the power to high gloss and flat on the ground.

Application Areas Straight shiny plaster surfaces, concrete walls and ceilings adherence It has enhancing applications and used as a primer in order to minimize the formation of cracks.

Technical Specifications Colors: Blue Density: 1.54 kg/m2 Consumption: state of the surface (150-200) g/m2 Application Tool: Brush, roller Packing: 15 kg bucket Shelf Life: 1 year original unopened packaging Applıcatıon Instructıons: Applied to all kinds of surfaces, dust, grease, dirt, glue, and so on like.foreign objects layers must be removed.

PLASTER CAST-PRIMER should be mixed thoroughly before use. Thinning can be done with water. The surface should be applied by roller or brush. One day after application, depending on weather conditions, or other materials can be applied after drying on. Increased by the addition of a little water in the packaging material, the packaging can be stored in tightly closed.

Cleaning of tools: All the team should be washed with water immediately after application.

WARNING: Cold (<+ I ° C), weather conditions should not be applied. Do not add any additives not mentioned in the Application Instructions. Keep out of the reach of children. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor. The above values at 23 ° C ± 2 for the enviromental conditions of temperature and humidity were 50 ± 5%. These values may vary depending on enviromental conditions. Store in a cool and dry environment.

Protect from frost.MAXICOLL technical support, or for more information, please contact Technical Support

ACRYLIC-BASED ABSORBENT SURFACES FITNESS-ENHANCING LINING PRODUCT DESCRIPTION Gas concrete, plaster, cement-lime plaster mixed surfaces, such as high porosity of the coating material that prevents absorption of water of hydration primer.

Surface Leveling Tool to Improve Adherence

Application Areas Plaster on the walls, such as concrete and Ytong, self-leveling concrete surface before straw plaster, concrete, drywall, wallpaper, ceramic coating on the walls priorthe screed under the carpet is used to prevent dusting.

Features Acrylic is indoor use only. Autoclaved aerated concrete, handle, cement-lime plaster mixed, lace, preventing water absorption within the material to be applied on materials such as gypsum board, prevents cracking of these materials. Prevents the ingress of water was placed on the structure of the material. Transparent color does not apply.

Application Surface preparation: Application surface should be dust-free, dry, and solid. , if materials such as paraffin oilis On the surfaceit will decrease the adherence those should be cleaned.

Mixing: Stir thoroughly prior to use material to prevent possible crashes. There is no need for the addition of water material watertomaterial .

Displacement: The material is applied in a single layer on application surface with a brush or roller.

Aerated concrete surfaces, such as tests conducted with high absorbancyevena single flooris found sufficient . If water sprinkled on the surface drops remains at the material after drying.

Technical Specifications Type Colour: White is transparent when placed Unit weight: 1,00 kg / Push Application Temperature: +5 째 C / +30 째 C PACKAGING: 20 -10 kg plastic buckets.

STORAGE: 12 months in closed and cool. Protect from frost WARNING: Cold (<5 째 C), hot (> +30 째 C) weather conditions should not be applied. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water.

In case of contact with eyes, consult. doctor immediately for assistance or more information please call Technical Support MAXICOLL

CERAMIC SURFACE PROTECTIVE Product Description Excellent penetration ability, ready to use solvent-free surface protective material. Application Areas Water and oil repellent properties of coating materials and joints due to contamination and make them resistant to outdoor weather conditions.

Prior to grouting, clinker, cotto, ceramic, granite, brick, coating materials are applied on for the protection and provides the cleaning jobs to facilitate Technical Specifications • Surface water and oil repellent makes.

• form a film layer on the surface.

View Shelf Life Application Temperature Drying Time Consumption • prevent the surface to breathe.

After you have installed will be transparent milky white. 12 months in unopened packaging in dry conditions (+5 ° C) - (+35 ° C) 4-5 hours Average 1 It / 20-100 m2 (depends on the porosity of the surface.)

Application Instructions Maxicoll ceramic surface must be completely dry and cleaned with the screensaver. Gloves should be worn during application. Maxicoll ceramic surface protector, diluted with water, place on a flat bristle brush or a sponge and an equal amount of each agent. Product poured directly to the surface. After application, wait for 1-2 minutes excess material must be removed with a cloth. Wait for 4-5 hours between coats. Vertical brick surfaces can be applied by spraying. New application to the application surface should be repeated 3-4 times a year, depending on the state of coating. Each re-application, the surface should be cleaned with appropriate Maxicoll products. Rinsed with plenty of water to clean the surface, After the surface is completely dry and then apply Maxicoll surface protector. before grouting applications, the product should be careful not to get into joint spaces.

After the application, the application tools can be cleaned with water.

Warnings Avoid contact with skin and eyes. Ready for use.

The surface should be dry.

Store in a cool, dry place.Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

JOINT PROTECTOR Product Description JOINT PROTECTIVE synthetic resin ready for use Excellent penetration ability, material.

Application Areas Interior and exterior, kitchen counters, floors and counter tops joint filler and oil repellent make the color of the joints resistant to dirt and outdoor weather conditions. After application of grouting is applied on the grout joints Features • Surface water and oil repellent makes.

• form a film layer on the surface.

• prevent the surface to breathe.

Technical Specifications Appearance: milky white becomes transparent after installing.

Shelf life in original sealed packaging Application Temperature: (+5 ° C) - (+35 ° C) Drying time: 3-4 hours Consumption: Average 20ml / m2 (Depends on the porosity of the surface.)

Application Instructions Should be cleaned and completely dried with Maxicoil JOINT PROTECTOR. Gloves should be worn during application.

Maxicoll JOINT PROTECTOR, diluted with water, place on a flat bristle brush or a sponge and an equal amount of each agent. Product poured directly to the surface. With an interval of 1 hour to 48 hours after jointing process is twofold application. Application to the application surface should be repeated 4-5 times a year depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicoll what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surfaces is completely dry and then apply JOINT PROTECTOR. After the application, the application tools can be cleaned with water. Warnings Avoid contact with skin and eyes. Ready for use.

The surface should be dry.

Store in a cool, dry place.Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

PREVENT DIRT AND WATER REPELLENT Product Description Excellent penetration ability, anti-dirt and water repellent synthetic resin material is ready for use.

Areas of Application interior and exterior, kitchen counters, floors and counter tops cleaned as often until i korur.Su uygulanır.Renkli joint filler and oil repellent thanks to the color of the joints make them resistant to dirt and outdoor weather conditions. After application of grouting is applied on the grout joints Features • Surface water and oil repellent makes.

• form a film layer on the surface.

• prevent the surface to breathe. Technical Specifications Appearance: milky white becomes transparent after installing Shelf life: 12 months in original packaging in a dry dispersed Application Temperature: (+5 ° C) - (+35 ° C) Drying time: 3-4 hours Consumption: Average 20ml / m2 (Depends on the porosity of the surface.)

Application Instructions.

PREVENTIVE AND WATER DIRT Maxicoll. DRIVING must be completely dry and cleaned. Gloves should be worn during application. DIRT Maxicoll PREVENTION AND WATER REPELLENT, diluted with water, with a flat bristle brush or sponge must be applied evenly all over. Product poured directly to the surface. With an interval of 1 hour to 48 hours after jointing process is two-fold application. Application to the application surface should be repeated 4-5 times a year depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicoll what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surface is completely dry and then apply Maxicoll DIRT PREVENTION AND WATER REPELLENT. After the application, the application tools can be cleaned with water.

Warnings Avoid contact with skin and eyes. Ready for use.

The surface should be dry.

Store in a cool, dry place. Must be protected from frost .Packing: 1 and 0.5 lt. squeeze bottle

CEMENT CLEANER Product Description Acid-resistant coating materials, cement residues from cleaning, acid cleaning agent. Areas of Application cement cleaner Technical Specifications View the pH value Shelf Life Application Temperature mixture consumption After application, ceramic, clinker, cotto, rustic tile, quarry stone, natural stone, granite, porcelain, ceramic, glazed ceramic tile and grout joints such as residues left on the cement and mortar residues can easily be used to clean all the construction.

Transparent liquid <1 12 months in unopened packaging in dry conditions (+5 ° C) - (+35 ° C) Ratio Cement remover / water: 1/1 -1 / 5 Average 1 It / 20 - 100m2 (Depends on the amount of cement residue.)

Application Instructions The residue on the amount of 1/1 or 1/5 mixed with water. These proportions are mixed with water to clean with Maxicoll Cement Cleaner can be done in two ways. Maxicoll Cement Cleaner, the section to be cleaned with a brush spread about 2 m2. Wait for 2-3 minutes and then scrub with a cloth should be initiated.

Should be taken with a sponge in a bucket of dirty water on the floor. Cloth and sponge, rinse with clean water frequently.

After cleaning all the spots for the regions Maxicoll Cement Cleaner mixed with less water spots should be prepared and applied over again. The whole area is cleaned off by rinsing with plenty of water and left to dry.

Cement Cleaner diluted with water to clean the remains challenging for longer than Maxicoll stain should be left on the surface.

Rubbing and wet / dry vacuum cleaning machine: WARNING: The product should be used while wearing gloves. Direct contact with skin and eyes should be avoided. For more detailed information refer to the Safety Data Sheet. Varnished and polished surfaces, polished marbles and not acidresistant coating materials used. Should be tried before using the product to be applied on surfaces. Should not be used for cleaning oil. Avoid frequent contact with grouting materials shown.

Store in a cool, dry place. Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

CEMENT CLEANER Product Description Acid-resistant coating materials, cement residues from cleaning, acid cleaning agent. Application Areas cement cleaner Technical Specifications View the pH value Shelf Life Application Temperature mixture consumption After application, ceramic, clinker, cotto, rustic tile, quarry stone, natural stone, granite, porcelain, ceramic, glazed ceramic tile and grout joints such as residues left on the cement and mortar residues can easily be used to clean all the construction.

Transparent liquid <1 12 months in unopened packaging in dry conditions (+5 째 C) - (+35 째 C) Ratio Cement remover / water: 1/1 -1 / 5 Average 1 It / 20 - 100m2 (Depends on the amount of cement residue.)

Application Instructions The residue on the amount of 1/1 or 1/5 mixed with water. These proportions are mixed with water to clean with Maxicoll Cement Cleaner can be done in two ways. Maxicoll Cement Cleaner, the section to be cleaned with a brush spread about 2 m2. Wait for 2-3 minutes and then scrub with a cloth dirty water on the floorShould be taken with a sponge in a bucket ., rinse with Cloth and spongewith clean water frequently. After cleaning all the spots for the regions Maxicoll Cement Cleaner mixed with less water spots should be prepared and applied over again. The whole area is cleaned off by rinsing with plenty of water and left to dry. dilutedCement Cleaner with water should be used for clean. The challenging remains for longer than Maxicoll stain should be left on the surface.

Rubbing and wet / dry vacuum cleaning machine: WARNING: The product should be used while wearing gloves. Direct contact with skin and eyes should be avoided. For more detailed information refer to the Safety Data Sheet. not acid-resistant coating materials should be Varnished and polished surfaces, marbles used. Should be tried before using the product to be applied on surfaces. Should not be used for cleaning oil. Avoid frequent contact with grouting materials shown.

Store in a cool, dry place. Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

CONTRIBUTION TO MULTI-PURPOSE MORTAR Product Description Cement-based mortar, plaster, screed to increase the performance of materials such as synthetic rubber based liquid mortar additive.

Application Areas Cement-based mortars flexibility, adherence and improves water tightness, repair slurries.

CONTRIBUTION TO MULTI-PURPOSE MORTAR

Features • Bond strength is increased.

• Abrasion resistant..

• Permeability decreases. Flexibility is increased.

• Resistance to freeze-thaw cycles • dilute acidic and basic solutions, salt water, and chemical resistant to oils.

Technical Specifications Appearance: white liquid Shelf life: 12 months in original sealed packaging Density: 1.03 ± 0.03 g/cm3 pH value of 8 • Application Temperature: (+5 ° C) - (+35 ° C) Mixing ratio: 1/1-1/4 (according to the place and purpose of use) Consumption varies according to the place and purpose of use Application Instructions İmproved and the surface must be solid. The surface must be free of debris that may prevent adhesion.

More air than needed to prevent the introduction of Maxicoli Mortar Additive. for different uses Mortar Additive Maxicoll recommended should be mixed with water according to the ratio in a suitable container. The concrete mixer should be placed, on the cement and fillers added. Lump in advance to avoid each other, mixing of cement and fillers are recommended elsewhere. Mortar should be mixed until a homogeneous mixture is obtained.

Plaster mortars to use: Cement mixed with sand with a particle size sufficient amounts of the appropriate mixture (cement / sand ratio: 1/4 -1 / 5); Maxicoll Mortar Additive / Water: 1/4 by participating in enough water to the mortar mixture is obtained.

Repair mortars to use: The prepared powder mortar (cement / sand ratio: 1/3 -1 / 4); Maxicoll Mortar Additive / Water: 1/2 the rate of repair mortar is obtained by participating in enough water to the mixture.

Screeds use: First of all, for the preparation of the mortar to be used as adhesion enhancing layer, dust, mortar (cement / sand ratio: 1/3), Maxicoll Mortar Additive / Water: 1/2 percent should be added to the liquid mixture until the consistency. the thickness of 2 mm to be prepared mixture should be applied to the floor by brush. screed should be applied. for the preparation of the mixture containing Sufficient sand and cement screed (cement / sand ratio: 1/3 -1 / 4), Maxicofl Mortar Additive / Water: 1/3 ratioenough water should be added to the mixture. Expired or shell mortar should be discarded.

After the implementation of tools and hands should be washed with plenty of water. High temperatures, low humidity, wind, etc Maxicoll climatic conditions of the mortar must be improved carefully prepared with Mortar Additive. Rapid evaporation can cause shrinkage and surface cracks due.

Warnings For more information refer to the Safety Data Sheet.

Clean and dry place, between +5 ° C and +35 ° C, so that there must be stored out of direct sunlight. Must be protected from frost.

Packaging: 5 Push, Push, plastic drums 10 and 20, Public Works Item No: 04.61314

EPOXY ADHESİVE AND GROUTİNG Product Description Epoxy resin-based, three-component, solvent-free, chemical resistant adhesive and sealant material.

Application Areas Where the desired chemical resistance and strength anti-acid porcelain tiles, terracotta, clinker, granite, ceramic and marble floor and wall bonding, food Industry (milk, beer, wine, meat Integrated plants, slaughter houses, cafes and restaurants), textiles, electronics Industry facilities, hospitals, laboratories, and pharmaceutical Industries as well as floor and wall installations of hygiene required for filling the joints. High chemical and mechanical strength is desired to fill the Industrial floor and wall joints, laboratory benches and commercial kitchen work surfaces, ceramic tile, filling the joints, or thermal water containing salt swimming pools and waste water treatment plants to fill the floor and wall joints.

Technical Specifications • Excellent adhesion.

• Resistant to heavy traffic.

• Vertical slip surface applications.

• Easy to trowelEasy to trowel.

• High chemical and mechanical resistance.

• Suitable for 10 mm joint widths.

• Resistant to short-term temperature changes.

• Freeze thaw resistant.

• Stain resistant.

• Hygienic for its low water absorption.

• Easy to smooth surface gives the possibility. > Cracking, abrasion resistant and long lasting.

• Easy to apply with pot life of 130 minutes at 25 ° C. Component A: White viscous liquid Component B: transparent, liquid Component A: white powder Shelf Life (Component A / B / C): unopened, original packaging when stored in 12 months Content of the mixture (Component A / B / C): Epoxy Resin / Hardener / Fill Application Specifications • Application temperature: (+10 ° C) - (+27 ° C) • Pot life: 25 0 C, 120 minutes • Open Time • Grouting Time: 12-48 hours (depending on enviromental temperature) • Touch dry: 7 hours • Walkabillty Duration: 24 hours • Usage Time (Maximum Chemical Resistance): 7 days • Consumption: 3-4 kg/m2 adhesive • Joint filling machinery; see. Epoxy Grout Consumption Table • Start:>2 N/mm2 • Water immersionThenimmersion Then:>2 N/mm2 • Thermal Shock After:>2 N/mm2 • Flexural strength (EN 12808-3):>30 N/mm2 • Compressive Strength (EN 12808-3):>45 N/mm2 • Wear Resistance (EN 12,808-2): <250 mm3 • Shrinkage (EN 12808-4): <1.5 mm / m • Water absorption after 240 min (EN 12808-5): <0.1 g • Temperature Range: (-20 ° C) - (+80 ° C) Application Instructions Surface Preparation • At low temperatures the viscosity of the material can be seen. For this reason, the material at room temperature (23 ± 3 ° C) 1 for one day.

• The surface must be dry and the moisture content is more than 5% should be considered.

• Bonding applications, construction debris and dust-free surface that may prevent adhesion, clean, and must be in balance. If there are defects on the surface leveled with Maxicoll Repair Mortar.

• The joints ranges from dust, dirt, and construction debris should be clean, free and at least 2/3 'must be emptied.

• Vonding of tiles with cement based material, surely must be over the 48 hours after the epoxy jointing.

As an adhesive Usage: • Before starting the application of protective gloves and goggles should be worn.

• Mixing bucket to pour into the bottom of the preparation of the component C, where A and B components, respectively, should be completely drained into the bucket and mix to obtain a homogeneous mix with a low speed mixer.

• Then this mixture on whether the component C in the same way should be mixed until a homogeneous mixture is obtained. Should not participate in any additives not mentioned in the Application Instructions.

• To obtain a better adhesion to the surface of the mixture, then spread to the surface with the flat side of trowel size of the tile selected In accordance with the notched trowel toothed part.

• Tiles, combed the mixture with a rubber hammer, preferably by applying a force on the affixed. Bonding process must not be expired on the mixture, the mixture was scraped from the surface.

• The prepared mixture should be used within 130 minutes. Expired or hardened mixture should be discarded.

• Do not walk on tiles for 24 hours after they are laid To use as a grouting: • The prepared mixture is poured on the tiles before the end of the pot life, with the help of plastic or hard rubber trowel and spread cross-motion joints must be thoroughly stuffed. Residues remaining on the tiles, grouting trowel, being careful not to make a joint cross-motions stripped the fill. sponge, joints and tile surface light cleaned. Cleaning sponge with water and must be replaced frequently.

• Immediately after application tools should be cleaned with plenty of water, cleaning should be done by mechanical means in case.

Warnings • Work Environment During The Application Thoroughly Ventilated. In Case Of Contact With Skin And Eyes Should Be Washed With Plenty Of Water. Technical Support, Or For More information, Please Call Technical Service Maxicoll Construction Chemicals Storage: Store in unopened original packaging, 5 0 C - 35 0 C. Store in a dry environment. Packaging: 5 kg units and plastic buckets.

EPOXY SIM EFFECT MAXICOLL Product Description Gold, silver and copper metallic glitter, glitter distinguishing places with bright, decorative, hygienic, easy to clean grout.

Application Areas interior and outsideceramic tiles, granite tile, porcelain tile, glass mosaic coating materials, such as horizontal and vertical applications. Swimming pool, bath, shower and other wet areas gives excellent results. Restaurant, night club, beauty and shopping centers are ideal for beautiful spaces.

Features • Stain resistant.

• Hygienic for its low water absorption.

• Smooth surface and easy to be deleted.

• Color does not fluctuate.

• The contribution of gloovecreates decorative and unique places.

• Cracking, abrasion resistant and long lasting.

• Cement based grout has far superior performance.

• Easy to apply with 25 ° C for 45 minutes pot life allows.

Technical Specifications View Component A: Transparent liquid Component B: Transparent liquid Component C: Black, White, Anthracite, Grey, Beige, Brown powder Component D: Silver, Gold, Copper dazzles Shelf life in original package, under appropriate storage conditions 12 months Application Specifications • Application temperature: (+10 ° C) - (+30 ° C) • Pot life: 25 ° C, 45 minutes • Consumption: for grouting; see. Epoxy Grout Consumption Table • Touch dry: 5 hours • Usage Time (epoxy grout): 7 days • Walkability Duration: 24 hours Performance Specifications • Flexural strength (EN 12808-3):> 30 N/mm2 • Compressive Strength (EN 12808-3):> 45 N/mm2 • Wear Resistance (EN 12,808-2):<250 mm3 • Shrinkage (EN 12808-4): <1.5 mm / m • Water absorption after 240 min (EN 12808-5):<0.1 g • Temperature Range: (-20 ° C) - (+80 ° C) Application Instructions Surface Preparation • The surface must be dry and the moisture content should be considered 3olmasına%.

• Joint ranges of dust, dirt, and construction is clean and free of debris.

• To see more pronounced the effect of gloovesjoint width is recommended to leave at least 3 mm.

• At low temperatures the viscosity of the material can be seen. For this reason, the material at room temperature (23 ± 3 ° C) 1 for one day.

• Before starting the application of protective gloves and goggles should be worn.

• Pour the mixture into the bucket with preparing the materials, respectively, A, B, and D to obtain a homogeneous mixture components should be completely drained and mixed with a low-speed mixer.

Should be noted that the mixing component D is light and volatile. Matt textures addition of component mixture can be prepared when you are prompted.

• Then, this mixture was added in the same way on the component C should be mixed until a homogeneous mixture is obtained. Should not addedany additives not mentioned in the Application Instructions.

• The pot life at 25 ° C for 45 minutes and the surface of the mixture and the enviromental temperature affect the pot life. High temperatures, low temperatures, prolonged pot life. Used expired pot life of the mixture.

• The prepared mixture is poured on the tiles before the end of the pot life, with the help of rubber trowel spread cross-motion joints must be thoroughly stuffed. Residues remaining on the tiles, rubber trowel, being careful not to remove the fill of joint cross-motion stripped joints.

• After 15 minutes Maxicoll apply epoxy grouting silvery sponge dampened with detergent and warm water, a slight circular motion moving the grout joints and tile surface should be cleaned condition.

Cleaning sponge with water and must be replaced frequently.

• 24 hours after the cloud layer is likely to remain on the tiles with a cloth moistened with rubbing vigorously cleaned. Exactly the same procedure in the event of a surface cleaned with vinegar water (1.6 g vinegar/100 g of water) or rubbing with acetone should be re-done. Cleaning of Tools • Equipment with plenty of water immediately after application and / or cleaned with acetone.

• Cleaning should be done by mechanical means on the tool in case of hardening of the material Warnings • Light colored products colors may darken when exposed to UV rays.

• When cleaning with strong basic and acidic discolor. For this reason, glitter epoxy joint cleaning Maxicoll use neutral pH soap and water mixture.

Storage: Store in unopened original packaging, 5 ° C - 35 ° C. Store in a dry environment. Packaging: 2.5 kg units and plastic buckets.

EPOXY PRIMER MULTI-PURPOSE FLOOR EPOXY PRIMER. Description: Low-viscosity, epoxy coating is used as a liner under the ground.

Application Surface Preparation Priming: Surface dust and moving parts must be removed before the preparation of the mixture and thoroughly cleaned. In addition, surface smoothness and hold onto (adherence) primed with a coat of Epoxy Primer Maxicoll to be high.

Consumption 250-400 g/m2 (depending on the surface) because it is self-leveling material, (applied with a brush or roller. Ground Processing the most important process.

Technical Specifications: Type: Part A Part B of viscous fluid Viscous liquid Colour: Transparent viscous products Density: Maxicoll Epoxy Coating (A + B) = 1.01 kg / l Component A + B = 1000 g.

Storage-Shelf Life: Store in a cool and dry environment. Protect materials from freezing. 8 months if stored correctly and unopened package of tools cleaning: Mix dry cleaning can be done with epoxy thinner. Dry material is cleaned mechanically.

WARNING: + 10 째 C + 30 C should not be used below. New concrete should be minimum 28 days.

Concrete moisture content should be below 5%. Use protective glasses and gloves should be used during the strong. In case of contact with skin removed immediately. Eye contact, or if swallowed consult a physician immediately. Maxicoll Technical Service for technical support and more information should be sought.

MULTI-PURPOSE EPOXY FLOORING PRODUCT DESCRIPTION Low viscosity, suitable filler material is mixed with self-leveling, roll a thin layer of two-component epoxy based floor coating which can be applied. Applications: Concrete and screed on exposure to light and medium traffic, industrial floors, loading and unloading areas, workshop, garage, warehouse, hangar, textile workshops, in areas exposed to heavy forklift traffic, aircraft hangars, helicopter tracks are used as floor covering.

Application Surface Preparation Priming: Surface dust and moving parts must be removed before the preparation of the mixture and thoroughly cleaned. In addition, surface smoothness and hold onto (adherence) primed with a coat of Epoxy Primer Maxicoll to be high. Consumption 250-400 g/m2 (depending on the surface) because it is self-leveling material, (applied with a brush or roller. Ground processing the most important process.

Coating: Epoxy Maxicoll that the coating (A + B) components prior to mixing with a low speed mixer themselves. Then, the component A component B should be mixed in the low-speed mixer for 3-4 minutes. In order to prevent more air in the mixture during mixing (mixed with light loads.) Prepared Part C of this mixture (powder) 1-1 measure, i.e. a maximum of 15 kg 15 kg quartz sand mixture is obtained by entering the selfleveling coating material. The surface is applied with a notched trowel. Fresh air is taken with a spiked roller coating. Roll a thin coating: Coating done after curing, epoxy with a roller by applying a thin coating process done on Maxicoll process (A + B), A and B should be mixed with a low speed mixer before themselves. Then, the component A component B should be mixed in the low-speed mixer for 3-4 minutes. air into the mixture during the mixing, (mixed with light loads.) Was prepared taking into account the waiting time the mixture was applied in two coats primed surface.

Technical Specifications Viscous liquid viscous liquid Part B Part C Part A Custom Quartz sand is prepared based on the desired color Maxicoll Epoxy Coating (A + B) = 1.35 kg / l Epoxy (A + B) + C component (1:1) = 1.90 kg / l Strengths: Maxicol Epoxy Floor Coating (A + B) 1 + C 1 unit of measurement for the pressure 60 N/mm2 (EN 196-1 luxury 28 day cure) Bending 30 N/mm2 (EN 196-1 luxury 28 days of curing). Wear70 mg (DIN 53 109 8-day cycles) Pot life: 25 minutes + 20 째 C Film Drying time: 2-2.5 hours at 20 째 C Consumption self-smoothing screed: Maxicol Epoxy Floor Coating (A + B) + C (1:1) for 1 mm thickness with 1.9 kg/m2 Roll Coating: Epoxy Maxicol Floor Covering (A + B) 300 g/m2, Packing: (A + B) 15 kg set, A component: 12.35 kg Pail B component: 2.65 kg Pail, C Component: 8 kg Bag Storage-Shelf Life: Store in a cool and dry environment. Protect materials from freezing. 8 months if stored correctly and unopened package Tools Clean: Mix dry cleaning can be done with epoxy thinner. Dry material is cleaned mechanically.

WARNING: + 10 "C below the + 30" C should not be used. New concrete should be minimum 28 days.

Concrete moisture content should be below 5%. Use protective glasses and gloves should be used during the strong. In case of contact with skin removed immediately. Eye contact, or if swallowed consult a physician immediately. Maxicoll Technical Service for technical support and more information should be sought.

STANDARD TILE ADHESIVE Ceramics / Tile Adhesive Product Description • Cement-based, ceramic adhesive mortar thixothropic. Application Areas • Small and medium-sized floor, wall tiles, travertine, decorative brick cladding materials, such as horizontal and vertical, bathroom, kitchen areas, concrete, plaster, alum used in the implementation of such surfaces.

Construction Chemicals

Standard Adhesive Gray CERAMIC TILES

Construction Chemicals

Standard Adhesive White CERAMIC TILES

Technical Specifications • Proven Quality adhesive.

• Easy to trowelEasy to trowel. (23 ° C and 50% Relative Humidity) General Information Appearance: Grey or White powder Shelf life: 12 months in original sealed packaging Application Specifications Application Temperature: (+5 ° C) - (+35 ° C) Mixing Ratio: 6 to 7.5 L of water / 25 kg powder Pot life: 3 hours Usage time: 8 hours on the wall - floor 1 day Consumption: 4,5 - 5 kg/m2 Performance Specifications Slip (EN 1308): £ 0.5 mm Adhesion to: Open Time (EN 1346):> 0.5 N/mm2 Start (EN 1348):> 0.5 N/mm2 After immersion in water (EN 1348): £ 0.5 N/mm2 After immersion in water (EN 1348):> 0.5 N/mm2 £ After freeze-thaw cycles (EN 1348): 0.5 N/mm2 Temperature Range: (-30 ° C) - (+70 ° C) At least 20 min. After> 0.5 Application Instructions Surface Preparation • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Repair Mortar Maxicer with the application surface defects should be corrected.

• 25 kg Standardglue6 to 7.5 Push gently on the water must be drained and mixed until a homogeneous mixture is obtained. Should be done with low speed mixer.Should not participate in any additives not mentioned in the Application Instructions.

• Prepared mortar should be maturedfor 5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• To obtain a better adhesion of mortar, the surface with the flat side of trowel spreading threaded portion of the tile size selected in accordance with the notched trowel.

• Tiles, within 20 minutes of applying force with a rubber hammer glued onto the combed mortar. Hightemperature, low humidity, sun, wind, etc may shorten this time to enviromental conditions. Bonding process must not be expired on mortar, the mortar must be scratched.

• The mortar should be used within 3 hours.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Tiles Maxicer at least 24 hours with the standard direct contact with water should be avoided. • Joint filling process, the wall 8 hours on the ground should be done after 1 day.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. Storage: Up to 10 layer stacks, stored in a dry environment.

Packaging: 25 kg. kraft paper bag.

Quality Certificates TS 11140 EN 12004 and DIN EN 12004 certified C1T (*) class.(*) C: Cement, 1: Normal curing (standard performance), T: vertical slip,

INNER PLACES TILE ADHESIVE Ceramics / Tile Adhesive Product Description • Cement-based, ceramic adhesive mortar thixothropic. Application Areas • Small and medium-sized floor, wall tiles, travertine, decorative brick cladding materials, such as horizontal and vertical, bathroom, kitchen areas, concrete, plaster, alum used in the implementation of such surfaces.

Construction Chemicals

Features • Proven Quality adhesive.

• Easy to trowelEasy to trowel.

Technical Specifications (23 ° C and 50% Relative Humidity) General Information Appearance: Grey or White powder Shelf life: 12 months in original sealed packaging

Flex Adhesive Interior Gray CERAMIC TILES GLASS MOSAIC

Flex Adhesive Interior White CERAMIC TILES GLASS MOSAIC

Application Specifications Application Temperature: (+5 ° C) - (+35 ° C) Mixing Ratio: 6 to 7.5 L of water / 25 kg powder Pot life: 3 hours Usage time: 8 hours on the wall - floor 1 day Consumption: 4,5 - 5 kg/m2 Performance Specifications Slip (EN 1308):<0.5 mm Open Time (EN 1346): At least 20 min. after Start (EN 1348):> 0.5 N/mm2 After immersion in water (EN 1348):> 0.5 N/mm2 After immersion in water (EN 1348):> 0.5 N/mm2 After freeze-thaw cycles (EN 1348):> 0.5 N/mm2 Temperature Range:> 0.5 N/mm2 (-30 ° C) - (+70 ° C) Application Instructions Surface Preparation • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Repair Mortar Maxicer with the application surface defects should be corrected.

• 25 kg Maxicer inner Location adhesive 6 to 7.5 Push gently on the water must be drained and mixed until a homogeneous mixture is obtained. Should be done with low speed mixer.Should not participate in any additives not mentioned in the Application Instructions.

• Prepared mortar, to mature aged for 5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• To get a better adhesion of mortar, the surface with the flat side of trowel spreading threaded portion of the tile size selected in accordance with the notched trowel.

• Tiles, within 20 minutes of applying force with a rubber hammer glued onto the combed mortar. Hightemperature, low humidity, sun, wind, etc may shorten this time to enviromental conditions. Bonding process must not be expired on mortar, the mortar must be scratched.

• The mortar should be used within 3 hours.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Tiles in interior Maxicer direct contact with water for at least 24 hours should be avoided.

• Joint filling process, the wall 8 hours on the ground should be done after 1 day.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes.

Storage: Up to 10 layer stacks, stored in a dry environment.

Packaging: 25 kg. kraft paper bag.

Quality Certificates TS 11140 EN 12004 and DIN EN 12004 certified C1T (*) class. (*) C: Cement, 1: Normal curing (standard performance), T: vertical slip,

OUTDOOR CERAMIC ADHESIVE

Construction Chemicals

Flex Adhesive Outer Space Gray CERAMIC TILES GRANITE

Flex Adhesive Outer Space White CERAMIC TILES GRANITE

Product Description • Cement-based, ceramic adhesive mortar thixothropic. Application Areas • Small and medium-sized floor, wall tiles, travertine, decorative brick cladding materials, such as horizontal and vertical, bathroom, kitchen areas, concrete, plaster, alum used in the implementation of such surfaces.

Features • Proven Quality adhesive.

• Easy to trowel Easy to trowel.

Technical Specifications (23 ° C and 50% Relative Humidity) General Information Appearance: Grey or White powder Shelf life: 12 months in original sealed packaging Application Specifications Application Temperature: (+5 ° C) - (+35 ° C) Mixing Ratio: 6 to 7.5 L of water / 25 kg powder Pot life: 3 hours Usage time: 8 hours on the wall - floor 1 day Consumption: 4,5 - 5 kg/m2 Performance Specifications Slip (EN 1308):<0.5 mm Open Time (EN 1346): At least 20 min. after Start (EN 1348):> 0.5 N/mm2 After immersion in water (EN 1348):> 0.5 N/mm2 After immersion in water (EN 1348):> 0.5 N/mm2 After freeze-thaw cycles (EN 1348):> 0.5 N/mm2 Temperature Range:> 0.5 N/mm2 (-30 ° C) - (+70 ° C) Application Instructions Surface Preparation • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Repair Mortar Maxicer with the application surface defects should be corrected.

• 25 kg Maxicer inner Location adhesive 6 to 7.5 Push gently on the water must be drained and mixed until a homogeneous mixture is obtained. Should be done with low speed mixer. Should not participate in any additives not mentioned in the Application Instructions.

• Prepared mortar, to mature aged for 5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• To get a better adhesion of mortar, the surface with the flat side of trowel spreading threaded portion of the tile size selected in accordance with the notched trowel.

• Tiles, within 20 minutes of applying force with a rubber hammer glued onto the combed mortar. Hightemperature, low humidity, sun, wind, etc may shorten this time to enviromental conditions. Bonding process must not be expired on mortar, the mortar must be scratched.

• The mortar should be used within 3 hours.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water. Surfaces should be cleaned with a damp cloth.

• Tiles in interior Maxicer direct contact with water for at least 24 hours should be avoided.

• Joint filling process, the wall 8 hours on the ground should be done after 1 day.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes.

Storage: Up to 10 layer stacks, stored in a dry environment.

Packaging: 25 kg. kraft paper bag.

Quality Certificates TS 11140 EN 12004 and DIN EN 12004 certified C1T (*) class.

AERATED CONCRETE ADHESIVE Block Adhesive

Construction Chemicals

Product Description • Cement-based, practical, concrete, pumice block mortar adhesive and mesh. Application Areas • with high water absorption aerated concrete, masonry, structural elements, such as pumice blocks used for weaving the.

Features • High adhesive strength.

• Easy to trowel Easy to trowel.

• Time and labor saving.

Aerated Concrete Pumice Bricks Knitting Mortar Adhesive

GREY

Technical Specifications (23 ° C and 50% Relative Humidity) Appearance: Grey powder Shelf life: 12 months in original sealed packaging Density: 1800-2000 kg/m3 Particle Size Max 2 mm Application Specifications Application temperature (+5 ° C) - (+35 ° C) Pot Life 5 hours Performance Specifications Compressive Strength :> 5 N/mm2 Bond Strength :> 0.3 N/mm2 Thermal Conductivity: None Flammability: A1 Application Instructions • Glue applied to the surface free of dust.

• The first line on the floor to correct disorders stranded in bringing the classic leveling mortar.

• Up to 25 6.5 to 7.5 kg Maxicer Push Mix Concrete Pour water slowly and mix to obtain a homogeneous mixture. Should be done with low speed mixer.Should not participate in any additives not mentioned in the Application Instructions.

• Prepared mortar should be mature for 10 minutes. Mixed with 1 -2 minutes before you restart the application again.

• Glue the whole surface evenly with notched trowel applied spring Implied 10x10x10 mm comb.

• When knitting exclusion of horizontal and vertical joints should be given no more than 3 mm wide, completely filled with the adhesive joint gaps should be considered.

• must be made on the combed mortar bonding process in 10-15 minutes.

• The mortar should be used within 5 hours.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes.

• Up to 10-fold stack must be stored in a dry environment.

Packaging: 25 kg. kraft paper bag Certificates TS EN 998 - February 2006 Public Works Item No: 04 478

KNITTED GLASS BRICK MORTAR

Construction Chemicals

Glass Brick Knitting Mortar Adhesive WHITE

Product Description White cement based polymer modified tile adhesive high-performance glass. Application Areas Glass Brick is used in weaving the interior and exterior of all buildings. Surface Preparation • Application surface must be clean, dust and debris should be cleaned prevent adhesion. Application • 20 kg. Adhesive Glass Brick Light Maxicer 6-7 L of water slowly into the mix until no lumps remain • 5 minutes prepared mixture. Rested, re-mixed to homogenous mixture.

• Prepared mortar, brick surface of the glass is thick, 3-10mm.

• During the bonding process, digital control should be taken adhesion property are lost.

• The mortar should be used within 2 hours. Advantages • Easy and quick to apply, • the adhesive, and is used as a joint sealant, • High performance, • Resistant to external factors Warnings • Knitted process is applied for at least 24 hours after grouting, • In high-performance M £ 1 day after application surface should be dampened, • Inhale cement, in contact with skin and eyes should be washed with plenty of water, • During the application on the remaining residues Glass Brick wiped with a wet sponge without loss of time, • Do not exceed the specified substrate and application instructions, • For information on all other application please consult us, • Direct left mine. Contact with eyes, rinse immediately with plenty of water, if necessary, consult your doctor. Maxicer technical support, or for more information, please contact Technical Support.

Packing: 25kg. Light paper bags. shelf Life: From date of manufacture in unopened packaging in dry medium 10 is 12 months.

Standard No. TS EN 12004/C1T Technical Specifications Appearance: White Application Temperature: +5 ° C / +35 ° C Mix Ratio: 6-7 lt. water / 20kg. Maxicol Glass Brick Adhesive Pot Life: 2 hours Consumption: 2.5 kg/m2 (joint thickness of 8mm) Adhesion strength:> 0.5 N/mm2 Flexural Strength:> 2.5 N/mm2 Compressive strength:> 7 N/mm2 Temperature Range: -30 ° C / +70 ° C Processing Time: 25 Minutes Drying time: 48 hours Full Prize time: 28 days

STYROFOAM HEAT ADHESIVE COATING Adhesive insulating panels

Construction Chemicals

Product Description Plate Heat wrapping the building is ready for use MAXICER Adhesive Bonding of thermal insulation boards designed for use inside or outside of the polymer cement-based adhesive mortar additives containing extremely economical.

Features It provides excellent adhesion. For adhesion prevents sliding and dropping plates. Operating time is very convenient, saves material. High water impermeability and flexibility.

Styrofoam Glue EPS - XPS - ROCK WOOL FOR GLASS WOOL

Application Areas Polystyrene.,Polyfoam Stone wool and rock wool heat insulation plates used for bonding vertical to the floor. Internal and external environments, Technical Specifications View Application: Gray Color Powder Temperature: +5 ° C / +35 ° C Mixing Ratio: 6-6.5 L of water / 25 kg powder Pot Life: 2 hours Consumption: 4-5 kg / m2 Packaging: 25 kg bags Shelf Life: un opened, packaging in a dry place for 12 months Flexibility Very good TS 11140 EN 12004 Skinning Time> = 10 min. 20 min.

Shift <0.5 mm <0.5 mm Adhesion Strength> 0.5 N/mm2> 2 N/mm2 APPLICATION INSTRUCTIONS: 25 kg. Stay dry mortars from 6 to 6.5 L of water on the mine-until a lump free mortar and mix gently. Surface is cleaned of debris that may prevent adhesion. If there are defects on the surface to be treated with the correct Maxicoll Repair Mortar. Fee for 5-10 minutes rest maturation, mix again before starting the application. Fit the size of plate heat thermal insulation mortar to the surface by spreading with a notched trowel, pressing sheets are equal to the quota. After receiving the adhesive improved, with the help of mechanical anchors attached to concrete walls and slabs. Dry before sealing film of adhesive mortar should be avoided. Consume the prepared mortar within 2 hours.

WARNINGS: Do not breathe dust from cement, Avoid contact with skin and eyes. Do not add any additives not mentioned in the Application Instructions. Store in a dry medium up to 10. P values above 23 ° C ± 2 and ± 5 are provided for humid enviromental conditions.

These values may vary depending on enviromental conditions. Maxicer Technical Support For technical support or more information please contact calves.

(0-6) mm FUGA JOINT FILLER

Construction Chemicals

Grouting Ceramic - Tiles WHITE

Product Description • Cement-based grout for standard performance. Application Areas • Floor and wall tiles, marble, natural stone, such as coating materials used to fill the joints between 0-6 mm.

• Indoors, the horizontal and vertical applications, gives excellent results. Features • Smooth surface.

• Resistant to abrasion and fading.

• does not split.

• Colors fade.

• 10 different color options.

Technical Specifications • Appearance: White or colored powder • Shelf Life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 6.6 to 7 L of water / 20 kg powder • Pot life: 1 hour • Usage time: 1 day • Consumption: Refer to the Statement of grout consumption Performance Specifications • Flexural strength (EN 12808-3): £ 2.0 N/mm2 • After the freeze-thaw cycles: Bending Muk. (EN 12808-3)> 2.0 N/mm2 • Compressive Strength (EN 12808-3):> 13N/mm2 • After the freeze-thaw cycles: Push Muk. (EN 12808-3) £ 13 N/mm2 • Wear Resistance (EN 12,808-2):<1000 mm3 • Shrinkage (EN 12808-4); £ 3mm / m • Water absorption: 30 min. / 4 hours (EN 12808-5):<5 g / <10 g • Temperature Range: (-30 ° C) - (+80 ° C) Application Instructions • Before grouting, adhesive should be improved.

• Joint breaks etch be completely free of debris. The depth of the joint between the ceramic thicknesses of at least 2/3 per cent need to be.

• Highly absorbent coating materials are used, the application of hot and windy weather, the joints should be dampened with clean water.

• 20 kg Maxicer Fuga (6 - 6.6) Push gently on the water must be drained and mixed until a homogeneous mixture is Obtained. Should be done with low speed mixer. Should not Participate in any additives not mentioned in the Application Instructions. Excess water at cracking, abrasion resistance and color defects can result.

• Prepared mortar, to mature5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• The mortar joints with a rubber grout trowel spread to the surface cross-motions must be completed and excess grout from the surface.

• the joints lose water supplies, usually after 15-30 minutes, the surface should be cleaned with a damp sponge in a circular motion with the help of. Waiting for the sun or the high absorptivity of the coating materials, direct sun, wind, etc. may shorten this time to the enviromental conditions. When the deletion process prematurely or too wet sponge in color may occur with the problem of fluctuation. Sponge should be cleaned at frequent Intervals.

After making sure that the joints are filled with Fuga• dry up, the remaining residues on the surface should be cleaned with a dry cloth.

• The mortar should be used within 1 hour.

• Expired or mortar should be discarded shell.

• After application tools and hands should be washed with plenty of water.

• Fuga very hot, dry and windy conditions are Applied, in order to improve the final performance is recommended to wet the joints after several hours.

• Joint application space can be used after 1 day Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. Maxicer technical support, or for more information, please contact Technical Support.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment Packaging: 20 kg kraft paper, polyethylene bags Quality Certificates TS EN 13888 certified CG1 class. C: Cement G: joint filler 1: Standard performance of Public Works Item No: 04.0132

(3-15) mm FLEX JOINT FILLER FUGA Product Description • Cement-based, high-performance flexible joint filler.

Construction Chemicals

Application Areas • Indoor and outdoor, large-sized ceramic, granite, cotto, clinker, glass mosaic, marble, natural stone, such as coating materials used to fill the joints between 3-15 mm.

• traffic load is heavy pedestrian and floors, exterior, floor heating system, such as places where sudden temperature shifts, swimming pool, wet areas, such as water tank, horizontal and vertical applications, gives excellent results.

Features • suitable for use in potable water tanks. High flexibility.Resistant to freeze-thaw cycles.Low water absorption. Smooth surface. Wear-and fade-resistant. Crack.

• Fast curing, open space provides immediate use. Colors do not fade. Have a choice of 10 different colors

Grouting Ceramic Tiles Granite WHITE

Technical Specifications • Appearance: White or colored powder • Shelf Life: 12 months in original sealed packaging Application Specifications • Application temperature: (+5 ° C) - (+35 ° C) • Mixing ratio: 5.5 to 6 L of water / 20 kg powder • Pot life: 1 hour • Usage time: 1 day • Consumption: See Table Grout Consumption Performance Specifications • Flexural strength (EN 12808-3):> 2.5 N/mm2 • After the freeze-thaw cycles: Bending Muk. (EN 12808-3) £ 2.5 N/mm2 • Compressive Strength (EN 12808-3):> 15 N/mm2 • After the freeze-thaw cycles: Push Muk. (EN 12808-3) £ 15 N/mm2 • Wear Resistance (EN 12,808-2):<1000 mm3 • Shrinkage (EN 12808-4): £ 3mm / m • Water absorption: 30 min. / 4 hours (EN 12808-5):<5 g / <10 g • Temperature Range: (-30 ° C) - (+80 ° C) Application Instructions • Before grouting, adhesive should be improved.

• Joint breaks etch be completely free of debris. The depth of the joint between the ceramic thickness of at least 2/3 per cent need to be.

• highly absorbent coating materials are used, the application of hot and windy weather, the joints should be dampened with clean water.

Application Instructions • 20 kg Flex Fuga 5.5 to 6 Push gently on the water must be drained and mixed until a homogeneous mixture is obtained. Should be done with low speed mixer.Should not participate in any additives not mentioned in the Application Instructions. Excess water at cracking, abrasion resistance and color defects can result.

• Prepared mortar, to mature Aged for 5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• The mortar grout joints with a rubber trowel spread to the surface cross-motions must be completed and excess grout from the surface.

• Water in the joints lose matt material, usually after 15-30 minutes, the surface should be cleaned with a damp sponge in a circular motion with the help of. Waiting for the sun or high absorptivity of coating materials, direct sun, wind, etc may shorten this time to enviromental conditions. When the deletion process prematurely or too wet sponge in color may occur with the problem of fluctuation. Sponge should be cleaned at frequent intervals.

After making sure that the joints are filled with Fuga• dry up, the remaining residues on the surface should be cleaned with a dry cloth.

• The mortar should be used within 1 hour.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

• Fuga very hot, dry and windy conditions are applied, in order to improve the final performance is recommended to wet the joints after several hours.

• Joint application space can be used after 1 day. Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. Maxicer technical support, or for more information, please contact Technical Support.

Storage: Store in the product, the more than 10-fold stack must be stored in a dry environment Packaging: 20 kg kraft paper, polyethylene bags.

Quality Certificates TS EN 13888 certified CG2 class. C: Cement G: Grout 2: Standard performance of Public Works Item No: 04.0132

REPAIR MORTAR – THIN

Construction Chemicals

Repair Mortar Slim Repair Repair Mortar

Product Description • Cement-based, poiymer reinforced repair mortar surface. Application Areas • The exposed concrete, precast concrete, gas concrete, brick, masonry surfaces, such as thin cracks filled, cast, engraved, broken, broken surfaces, 1-5 mm is suitable for repair and plaster repairs.

• restoration work in building, painting, ceramic coating, providing a smooth surface prior to isolation are used.

Technical Specifications • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Before application, dampen the surface to get a better result or Maxicer surface should be primed with Primer.

Gray Appearance: powder Shelf life: 12 months in original sealed packaging Application Specifications Application Temperature: (+5 ° C) - (+35 ° C) Mixing Ratio: 5.5 to 6 L of water / 25 kg powder Pot Life: min. 60 min.

Application thickness: Max. 5 mm (single layer) Consumption: 1,5-2 kg/m2 (1mm thickness) > 13.0 N/mm2 (28 days) > 4.0 N/mm2 > 1 N/mm2 (-30 ° C) - (+80 ° C) > 0.8 N/mm2 > 0.5 kg/m2h0, 5 A1 Usage time: 6 hours Performance Specifications Compressive Strength (EN 12808-3): 13.0 N/mm2 (28 days) Flexural Strength (EN 12808-3): 4.0 N/mm2 Adhesion to Concrete (EN 1542): 1 N/mm2 Temperature Range: (-30 ° C) - (+80 ° C) Restrained shrinkage-expansion (EN 12,617 to 4): 0.8 N/mm2 Capillary Water Absorption (EN 13 057): 0.5 kg/m2h0, 5 Flammability (EN 13501-1): A1 Application Instructions • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Prior to application, the surface should be dampened or primed with Maxicer to get a better result.

• 25 kg Maxicer Repair Mortar 5 5.5 to 6 Push gently on the water must be drained and mixed until a homogeneous mixture is obtained. Should be done with low speed mixer.Should not participate in any additives not mentioned in the Application Instructions.

• Prepared mortar, to mature aged for 5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• The mortar on the floor with a steel trowel broken, cracked, broken, applying pressure to areas of equal thickness not exceeding 5 mm should be filled and the surface.

• The surface must be smoothed with a wet sponge.

• After application, the surface should humidities for 24 hours from time to time. Ideal weather conditions and with normal absorption should wait for about 6 hours before the ceramic coating on a surface, shorter this time to the summer, in the winter months longer.

• The mortar should be used within 60 minutes.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

Warnings • Bags on the more than 10-fold stack must be stored in a dry environment.

Packing: 25 kg bags.

Quality Certificates TSEK Public Works Item No: 04.61331

REPAIR MORTAR - THICK

Construction Chemicals

Product Description • Cement-based, polymer modified repair mortar surface. Application Areas • The exposed concrete, precast concrete, gas concrete, brick, masonry surfaces, such as thin cracks filled, cast, engraved, broken, broken surfaces, 1-5 mm is suitable for repair and plaster repairs.

• restoration work in building, painting, ceramic coating, providing a smooth surface prior to isolation are used.

Technical Specifications • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Before application, dampen the surface to get a better result or Maxicer surface should be primed with a primer.

Repair Mortar

Appearance: Grey color dust

Thick Repair Repair Mortar

Application Specifications Application Temperature: (+5 ° C) - (+35 ° C) Mixing Ratio Package: 5.5 to 6 L of water / 25 kg powder Life Application: min. 60 min. , Max. 5 mm (one coat) Thickness Consumption: 1.5 - 2 kg/m2 (1 mm thickness) Usage time: 6 hours Shelf life: 12 months in original sealed packaging Performance Specifications Compressive Strength (EN 12808-3): 13.0 N/mm2 (28 days) Flexural Strength (EN 12808-3): 4.0 N/mm2 Adhesion to Concrete (EN 1542): 1 N/mm2 Temperature Range: (-30 ° C) - (+80 ° C) Restrained shrinkage-expansion (EN 12,617 to 4): 0.8 N/mm2 Capillary Water Absorption (EN 13 057): 0.5 kg/m2h0, 5 Flammability (EN 13501-1): A1 Application Instructions • Make sure the surface is improved and strong.

• The surface must be free of debris that may prevent adhesion.

• Prior to application, the surface should be dampened or Maxicoll primer to get a better result.

• 25 kg Maxicer Repair Mortar 5 5.5 to 6 Push gently on the water must be drained and mixed until a homogeneous mixture is obtained. Should be done with low speed mixer.Should not participate in any additives not mentioned in the Application Instructions.

• Prepared mortar, to mature aged for 5-10 minutes. Stir for 1-2 minutes before you restart the application again.

• The mortar on the floor with a steel trowel broken, cracked, broken, applying pressure to areas of equal thickness not exceeding 5 mm should be filled and the surface.

• The surface must be smoothed with a wet sponge.

• After application, the surface should humiditise for 24 hours from time to time. Ideal weather conditions and the pre-ceramic coating on a surface with normal emiciiiğe should wait for about 6 hours in the summer, this time to just shorter in the winter months longer.

• The mortar should be used within 60 minutes.

• Expired or shell mortar should be discarded.

• After application tools and hands should be washed with plenty of water.

Warnings • Do not inhale cement dust, Avoid contact with skin and eyes. storage • Bags on the more than 10-fold stack must be stored in a dry environment.

Packing: 25 kg bags.

Quality Certificates TSEK Public Works Item No: 04.61331

DECORATIVE PLASTER Product Description White cement based, one-component, polymer modified, applied with a trowel, mineral textured decorative finish cladding.

Construction Chemicals

Decorative Plaster

Application Areas • Coat decorative coating material for thermal insulation systems, • Interior and exterior wall plaster is used on.

Features • Easy to apply, excellent adhesion.

• Decorative and a homogeneous-looking application.

• Thermal insulation systems, applications, wavy appearance can be corrected.

• Water and frost resistant.

• resistant against external influences and protects the structure for many years.

• Water vapor diffusion and allowing the structure to breathe.

• can be applied on exterior paints.

Technical Specifications Appearance: White, Ivory and Beige colored granular Powder Density: 1.55 kg / lt.

Water Mixing Ratio: 6-6,5 lt. water / 25 kg. dust Resting time: 2-3 minutes Pot Life Approx: 1.5-2 hours Application Temperature: +5 ° C to 35 ° C Application thickness: about 2 mm.

Full Drying time: 1-2 days Temperature Resistance: -20 ° C / +70 ° C Consumption: 3 kg/m2 (may vary depending on the application surface.)

Application Instructions 25 Kg bag, with 6 to 6.5 kg of water is mixed with a low speed mixer. Pre-saturated surface water applied with a trowel. Aerated concrete, Ytong absorption of water absorbency high walls, such as pre-Maxicer primer.Temperatures below +5 ° C and +35 ° C. Avoid application. Apply possible without a break, interruption if necessary by dividing the surface areas of about 20 m2 Apply separately. Plastic trowel application at least 10 min..Frostbe allowed to film on the inside through the plaster, or who are at risk of freezing within 24 hours of direct sun and wind Avoid application in public areas. After the application until the cement plug (about 1 week) Please note that there is no snow or severe cold. Do not use the expired mortar absolutely dust and water addition. Product should not be applied on a horizontal surface in the rain.

Packaging: 25 kg. 'Kraft bags Shelf life in unopened package ¡humidity environments and can be stored for 6 months on a pallet with 10-fold sequence.

Warning Handling and storage of food products during the occurrence of a cement-based, skin, eyes and mouth should be avoided. Seek medical attention if swallowed by accident. Contact with skin, rinse immediately with plenty of water. Maxicer technical support, or for more information, please contact Technical Support.

HEAT THERMAL INSULATION PLASTER Mortar used in thermal insulation panels

Construction Chemicals

Product Description PLASTER PLATE HEAT COATING Maxicer ready for use on the thin layer of thermal insulation boards designed with the aim of creating plaster, polymer-containing, highly economical plaster mortar. All kinds of interior and exterior sheathing hotplates work, concrete surfaces prior to painting plaster is used for six.

Application Areas All kinds of heat insulation plate (XPS: extruded polystyrene or EPS: Expanded polystyrene) is used as a plaster on top. Concrete surfaces, the paint is also used for six before the bell.

Plaster Styrofoam EPS - XPS - ROCK WOOL FOR GLASS WOOL DOPED FIBER HIGH STRENGTH

Features Provides perfect . The application gives you the ease and aesthetic appearance. Easy to prepare and apply, the processing time is long. Can be applied directly onto the paint. Cracking and will not shrink.

Application: The mixture was a bag, 5-6 kg of water are mixed for 3-4 minutes with a low speed mixer. Rest for 5 minutes. Repeat for 1-2 minutes mixed material should be used within 2 hours. Surface Preparation: should be applied to the surface is extremely clean. Remove any loose parts reduce the adherence of the material to be used to prevent rapid loss of water supplies stirup.

Application Method Adhesive Plate Heat thermal insulation boards glued with Maxicer then a coat of mortar on the plate Maxicer PLASTER PLATE HEAT MANTOLAJVIA applied. Then plaster mesh is embedded into the first coat. Then, the second coat of plaster should be done. If you are prompted plaster surface can be corrected with a wet sponge. After curing of surface coating can be applied to any desired color and appearance.

Technical Specifications Type Colour: Cement based powder mortar: Grey color Unit weight :: 1.8 -1.9 kg / l (ağırlıkgaKharg density) Mixing Ratio: 25 kg plaster 0.5 to 6 liters of water is added to Application temperature: +5 ° C / +30 ° C Application time: Approximately 45-60 minutes (25 ° C) Consumption (depending on the surface): 1.8 to 2.0 kg/m2 (1mm thickness) Packing: 25 kg bags moisture resistant.

Storage: Moisture resistant bag, closed and dry conditions Shelf life: 12 months in original packaging.

Warning: Cold (<5 ° C), hot (> +35 ° C) weather conditions and should not be applied. The material must be taken not to lose water rapidly. Do not add any additives not mentioned in the Application Instructions.

Keep out of the reach of children. (Hot-use protective eyewear and gloves. Cement, respiratory system and skin. Event of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, immediately consult a doctor.

Store in a dry medium more than 10, the above values at 23 ° C ± 2 for the enviromental conditions of temperature and humidity were 50 ± 5%. these values may vary depending on enviromental conditions.

MAXICER Technical Support for technical support or for more information call

SELF-LEVELING SAP Cement-based, self-leveling floor leveling mortar Product Description Maxicer self-leveling screed, taking mortar used to fix an uneven concrete floors. One-time 1-30 mm thick can be applied to the polymer content, cracking and non-shrink cementations screed mortar.

Construction Chemicals

Self-leveling Screed Floor Leveling Tool

Application Areas Correction of uneven and rough concrete, precast concrete surface correction, carpet, ceramic, natural stone, hardwood, marble, hardwood, vinyl and used for correction of the surface prior to application of coating materials, such as PVC. Features Self-leveling. Shrinkage and cracking does not occur. Also be applied to external weather conditions. Fast curing.

Application Instructions Surface Preparation: Surfaces must be clean. Reduce the adherence loose parts should be cleaned with mechanical or air. Iron surfaces of rust, oil and grease, and dust thoroughly cleaned. Surfaces should be repaired with repair mortar.SurfaceMaxicer holes and corners, the area to be treated and prevented air flow should not be applied under the sun.

Priming: Saturated with water for a few hours prior to the concrete. Should not be standing water during application. Absorbent, or very smooth surfaces to receive air from the bottom to ensure adherence and insulating purposes, Maxicer bonding agent before applying primer surface to be grouted, or applied with a roller.

Mixing: a clean container 6-7 it. on the powder component is added to the water slowly with a low speed mixer to a homogeneous mixture is mixed. After waiting for a few minutes until the mixture becomes homogenous mixing.

Application: The prepared mixture is applied to the surface, to obtain the desired thickness with a trowel or squeegee. Spilled material should be removed in the air with a spiked roller. Maxicer self-leveling screed "to establish in order to prevent rapid curing, during the high temperature, direct sunlight, and should be taken against the wind.

Technical Specifications Type: cement-based powder Color: Dark gray Density: 2.0 kg / Push, 20 째 C for 35 min.

PACKAGING: 25 kg moisture-resistant paper bags.

WARNING: Surface and enviromental temperature must be a minimum +8 째 C, trying to use protective eyewear and gloves. In case of contact with skin, rinse immediately with plenty of water, seek medical advice immediately In case of contact. MAXICER technical support, or for more information, please contact Technical Support.

BONDING AGENT PRIMER Acrylic-based fitness-enhancing primer on absorbent substrates Product Description Gas concrete, plaster, cement-lime plaster mixed surfaces, such as high porosity of the coating material to them that prevents absorption of water of hydration primer.

Construction Chemicals

Leveling Primer Surface Bonding Agent

Application Areas Plaster on the walls, such as concrete and Ytong ago, self-leveling concrete surface before straw plaster, concrete, drywall, wallpaper, ceramic coating on the walls before the screed under the carpet is used to prevent dusting.

Features Acrylic is based indoor use only. Autoclaved aerated concrete, handle, cement-lime plaster mixed, lace, preventing water absorption within the material to be applied on materials such as gypsum board, prevents cracking of these materials. Prevents the ingress of water was placed on the structure of the material.

Transparent color does not.

Application Surface preparation Application surface dust-free, dry, and should be solid.

On the surface oil, if materials such as paraffin will decrease the adherence cleaned.

Mixing: Stir thoroughly prior to use material to prevent possible crashes. There is no need for the addition of material to water.

Displacement: The material is applied in a single layer on application surface with a brush or roller. Aerated concrete surfaces, such as tests conducted with high absorbtionssufficient condition is found that even a single floor. If drops of water sprinkled on the surface remains at the material after drying.

Technical Specifications: Type Colour: White. driven clear.

Unit weight: 1.00 kg / l Application temperature: +5 째 C / +30 C Consumption: 150-200 gr/m2 Packaging: 20 kg plastic buckets first.

STORAGE: 12 months in closed and cool. Protect from frost.

WARNING: Cold (<5 째 C), hot (> +30 째 C) weather conditions and should not be applied. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, consult doctor immediately for assistance or more information please call Technical Support MAXICER.

CERAMIC SURFACE PROTECTOR Product Description Excellent penetration ability, ready to use solvent-free surface protective material. Application Areas Water and oil repellent properties of coating materials and joints due to contamination and make them resistant to outdoor weather conditions.

Prior to grouting, clinker, cotton, ceramic, granite, brick, after application of coating materials are applied on the protection and provides facilitate the cleaning jobs.

Technical Specifications • Surface water and oil repellent makes.

• form a film layer on the surface.

• prevent the surface to breathe.

Appearance: milky white becomes transparent after installing Shelf life: 12 months in original sealed packaging Application Temperature: (+5 ° C) - (+35 ° C) Drying time: 4-5 hours Consumption: Approximately 1 It/20- 100 m2 (depends on the porosity of the surface.)

Application Instructions Maxicer ceramic surface must be completely dry and cleaned with the screensaver. Gloves should be worn during application. Maxicer ceramic surface protector, diluted with water, place on a flat bristle brush or a sponge and an equal amount of each agent. Product poured directly to the surface. After application, wait for 1-2 minutes more material must be removed with a cloth. Wait for 4-5 hours between coats. Vertical brick surfaces can be applied by spraying. Application to the application surface should be repeated 3-4 times a year, depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicer what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surface is completely dry and then apply Maxicer surface protector. Be made before grouting applications, the product should be careful not to get into joint spaces.

After the application, the application tools can be cleaned with water.

Warnings Avoid contact with skin and eyes. Ready for use.

The surface should be dry.

Store in a cool, dry place.Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

JOINT PROTECTOR Product Description JOINT PROTECTIVE synthetic resin is ready for use Excellent penetration ability, material.

Application Areas interior and exterior, kitchen counters, floors and counter tops cleaned as often until joint filler and oil repellent for the color of the joints make them resistant to dirt and outdoor weather conditions. After application of grouting is applied on the grout joints Features • Surface water and oil repellent makes.

• form a film layer on the surface.

• prevent the surface to breathe.

Technical Specifications Appearance: milky white becomes transparent after installing Shelf life: 12 months in original sealed packaging Application Temperature: (+5 ° C) - (+35 ° C) Drying time :3-4 hours Consumption: Average 20ml / m2 (Depends on the porosity of the surface.)

Instructions Should be cleaned and completely dried with Maxicer JOINT PROTECTOR. Gloves should be worn during application.

JOINT Maxicer. PROTECTOR, diluted with water, with a flat bristle brush or sponge should be applied evenly all over.

Product poured directly to the surface. With an interval of 1 hour to 48 hours after jointing process is two-fold application.

Application to the application surface should be repeated 4-5 times a year depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicer what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surface is completely dry and then apply JOINT PROTECTOR. After the application, the application tools can be cleaned with water.

Warnings Avoid contact with skin and eyes. Ready for use.

The surface should be dry.

Store in a cool, dry place. Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

PREVENT DIRT AND WATER REPELLENT Product Description Excellent penetration ability, anti-dirt and water repellent synthetic resin material is ready for use.

Application Areas Color joint filler and oil repellent for the color of the joints make them resistant to dirt and outdoor weather conditions.

After application of grouting is applied on the grout joints Features • Surface water and oil repellent makes.

• form a film layer on the surface.

• prevent the surface to breathe.

Technical Specifications Appearance: white. After you have installed will be transparent.

Shelf life: 12 months in original sealed packaging Application Temperature: (+5 ° C) - (+35 ° C) Drying time: 3-4 hours Consumption: Average 20ml / m2 (Depends on the porosity of the surface.)

Application Instructions.

Maxicer DIRT AND WATER REPELLENT ANTI-cleaned and must be completely dry with. Gloves should be worn during application. DIRT Maxicer PREVENTION AND WATER REPELLENT, diluted with water, with a flat bristle brush or sponge should be applied evenly all over. Product poured directly to the surface. With an interval of 1 hour to 48 hours after jointing process is two-fold application. Application to the application surface should be repeated 4-5 times a year depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicer what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surface is completely dry and then applyMaxicer DIRT PREVENTION AND WATER REPELLENT. After the application, the application tools can be cleaned with water.

Warnings :Avoid contact with skin and eyes. Ready for use The surface should be dry.

Store in a cool, dry place.Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

PREVENT DIRT AND WATER REPELLENT Product Description Excellent penetration ability, anti-dirt and water repellent synthetic resin material is ready for use.

Application Areas Color joint filler and oil repellent for the color of the joints make them resistant to dirt and outdoor weather conditions.

After application of grouting is applied on the grout joints Features • Surface water and oil repellent makes.

• form a film layer on the surface.

• prevent the surface to breathe.

Technical Specifications Appearance: white. After you have installed will be transparent.

Shelf life: 12 months in original sealed packaging Application Temperature: (+5 ° C) - (+35 ° C) Drying time: 3-4 hours Consumption: Average 20ml / m2 (Depends on the porosity of the surface.)

Application Instructions.

Maxicer DIRT AND WATER REPELLENT ANTI-cleaned and must be completely dry with. Gloves should be worn during application. DIRT Maxicer PREVENTION AND WATER REPELLENT, diluted with water, with a flat bristle brush or sponge should be applied evenly all over. Product poured directly to the surface. With an interval of 1 hour to 48 hours after jointing process is two-fold application. Application to the application surface should be repeated 4-5 times a year depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicer what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surface is completely dry and then applyMaxicer DIRT PREVENTION AND WATER REPELLENT. After the application, the application tools can be cleaned with water.

Warnings :Avoid contact with skin and eyes. Ready for use The surface should be dry.

Store in a cool, dry place.Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

CEMENT CLEANER Product Description Acid-resistant coating materials, cement residues from cleaning, acid cleaning agent.

Application Areas After application, ceramic, clinker, cotto, rustic tile, quarry stone, natural stone, granite, porcelain, ceramic, glazed ceramic tile and grout joints such as residues left on the cement and mortar residues can easily be used to clean all the construction.

Technical Specifications Appearance pH value: Transparent liquid <1 Shelf life: 12 months in original sealed packaging Application Temperature: (+5 째 C) - (+35 째 C) Mix: Ratio of cement remover / water: 1/1 -1/5Ortalama 1 Push Consumption: 20 - 100m2 Application Instructions The residue on the amount of 1/1 or 1/5 mixed with water. These proportions are mixed with water to clean with Maxicer Cement Cleaner can be done in two ways: Maxicer Cement Cleaner, the section to be cleaned with a brush spread about 2 m2. Wait for 2-3 minutes and then scrub with a cloth should be initiated.

Should be taken with a sponge in a bucket of dirty water on the floor. Cloth and sponge, rinse with clean water frequently. After cleaning all the spots for the regions Maxicer Cement Cleaner mixed with less water spots should be prepared and applied over again. The whole area is cleaned off by rinsing with plenty of water and left to dry.

Cement Cleaner diluted with water to clean the remains challenging for longer than Maxicer stain should be left on the surface. Rubbing and wet / dry vacuum cleaning machine: WARNING: The product should be used while wearing gloves. Direct contact with skin and eyes should be avoided.

For more detailed information refer to the Safety Data Sheet. Varnished and polished surfaces, polished marbles and not acid-resistant coating materials used. Should be tried before using the product to be applied on surfaces.Should not be used for cleaning oil. Avoid frequent contact with grouting materials shown.

Store in a cool, dry place.Must be protected from frost.

Packing: 1 and 0.5 lt. squeeze bottle

Grout Coverage Charts (coating length + coating width) x joint width x depth x joint sealant joint density factor Need for grouting (kg / m 2) (coating length x veneer width) Joint Theoretical Coverage Tables Joint Table-1: Maxicoll / Maxicer / Tech-Master 0-6 mm Cement Joint Fillers ConstitutionCoverage Tables Ceramic Size (mm)

Joint Width (mm)

Joint Depth (mm)

Consumption (kg./ m2)

Table-2: Maxicoll / Maxicer / Tech-Master 3-15 mm Cement Joint Fillers Constitution Ceramic Size (mm)

Joint Width (mm)

Joint Depth (mm)

Consumption (kg./ m2)

Joint Depth (mm)

Consumption (kg./ m2)

Joint Depth (mm)

Consumption (kg./ m2)

Joint Depth (mm)

Consumption (kg./ m2)

Table-3: Maxicoll 3-20 mm Cementitious grout Ceramic Size (mm)

Joint Width (mm)

Table-4: Effect Maxicoll Sim Epoxy Grout Ceramic Size (mm)

Joint Width (mm)

Table-5: Maxicoll Epoxy Grout Ceramic Size (mm)

Joint Width (mm)