Rhombunctious Construction Manual

Page 1

RHOMBUNCTIOUS Lakes of Fire + Burning Man 2016

CONSTRUCTION MANUAL

Design Team: Lucas Bartosiewicz Colin O’Keefe Annie Locke Scherer Rick McGarry

Supporting Camp: SYNCYTIUM Documennt Produced by: Lucas Bartosiewicz


Lakes of Fire Concept 2016

Lakes of Fire Concept 2016 RhomBunctious 2016

2


Burning Man Concept 2016 + on

Burning Man Concept 2016 + on

RhomBunctious 2016

3


SUPPLIES

1 x COMPOUND MITER SAW - 1/8 in. BLADE

2 x POWER DRILLS 1 x 1/8 in. DRILL BIT 1 x PHILLIPS HEAD DRILL BIT

3 WEDGE SUPPORTS. 288 x 3-1/2 in. GENERAL PURPOSE SCREWS APX - 6 lb. Or 3 - 1/2” 4 WEDGE SUPPORTS. 336 x 3-1/2 in. GENERAL PURPOSE SCREWS APX - 8 l.b

16’

19 x [ 2 in. x 4 in. x 12 ft. ] NOMINAL WOOD STUD

RhomBunctious 2016

4


1. Cut all 18. 2x4s down into even segments using miter saw.

1/8” 1/8” 1/8”

35 - 29/32” 35 - 29/32” 35 - 29/32”

Total Segments = 72 Note: They will be slightly less than 3 feet.

16’

35 - 29/32”

2.

Assemble segments into angles of Two. Total Angles = 36 Combine Angles into Squares Total Squares = 18 + Pre-drill holes for all screws to avoid splitting wood + Joints are to be square

Cut Angled wedges by angling Miter Saw to 22.5 deg. Flip stud for every cut. Total Wedges = 96

3.

Screw base wedge to Square, using extra 2x4 at base as platform guide. 1/8”

+ Trim Wedges so all are even. + Pre-drill holes for all screws to avoid splitting wood

4.

Field measure distance between end wedges and trim extra 2x4 to use as guide. apx ~ 8.15” guide + Pre-drill holes for all screws to avoid splitting wood + All wedges should be consistant on squares and face same direction.

RhomBunctious 2016

5


Assemble 18 panels with wedges as shown, into Panels A, B, C, and D. These panels will be stacked into a truck or van for transportation, to then be unloaded and assembled at Lucky Lake, or Black Rock City.

18 Panels

A.

B.

C.

D.

- Assembly details can be seen in diagrams 5 - 14

x8

x4

x4

x2

RhomBunctious 2016

6


Combine panels A + B on a at surface using 2 screws per wedge.

5.

Combine 4 sets of these panels for the initial octagon. + Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

A. B.

6. Combine those four components to create an octagon at on the ground. + Joints are to be square

B.

A.

+ Pre-drill holes for all screws to avoid splitting wood

A. B.

B. A. B.

A.

RhomBunctious 2016

7


7.

Octagon is completed... Have a beer.

8. Now to assemble the ďŹ rst cap. Begin by combining Panels A + D + A as shown on a at surface using two screws per wedge.

+ Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

A.

A.

D.

RhomBunctious 2016

8


9. D. A.

A. Align cap onto Octagon and secure into place using two screws per wedge. At this point it may be necessary to clamp the panels into their proper position due to warping or tolerance issues. + Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

10.

A. A.

Align the remaining two A panels to complete the ďŹ rst cap. At this point it may be necessary to clamp the panels into their proper position due to warping or tolerance issues. + Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

RhomBunctious 2016

9


11.

Now to assemble the ďŹ nal cap. Begin by combining Panels C + D + C as shown on a at surface using two screws per wedge.

+ Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

C. C.

12.

D.

D.

C.

C. Align cap onto Octagon and secure into place using two screws per wedge. At this point it may be necessary to clamp the panels into their proper position due to warping or tolerance issues. + Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

RhomBunctious 2016

10


13. C.

C.

Align the remaining two C panels to complete the ďŹ nal cap. At this point it may be necessary to clamp the panels into their proper position due to warping or tolerance issues. + Joints are to be square + Pre-drill holes for all screws to avoid splitting wood

14.

RHOMBUS IS ASSEMBLED!!!! PARTY DOWN! (unless there are more to assemble)

RhomBunctious 2016

11


RhomBunctious 2016

12


RhomBunctious 2016

13


RhomBunctious 2016

14


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.