in association with Autex速 New Zealand
AnutoneSlim
FABRIC WALL SYSTEMS www.anutone.com/fabrics.htm
AnutoneSlim Brochure 1.4 May 2009
Design Flexibility of Fabric Walls
Applications
2
•
Offices
•
Boardrooms
•
Classrooms
•
Lecture halls
•
Libraries
•
Entranceways / corridors
•
Music rooms
•
Bedrooms
•
Showrooms
•
Retail fitouts
•
Motor homes
•
Home theatres
•
Restaurants / bars / cafes
Complete design freedom with AnutoneSlim The coming together of Anutone India and Autex New Zealand for interior solutions, augurs well for space users in India and South Asia. Walls need never be drab or boring again. AnutoneSlim wall coverings provide a colourful and practical solution with the freedom of design choice. AnutoneSlim is the perfect choice for applications such as office, school, home and even yachts. AnutoneSlim is also ideal as a finish on office partitions, exhibition panels and retail displays. Keeping it quiet AnutoneSlim acoustic wall coverings come with a 10-12mm polyester backing to create a multi-use wall covering with exceptional acoustic properties. Entire wall can be covered with AnutoneSlim reducing reverberated noise by approximately 40 per cent (NRC rating 0.4). With backings like AnutoneSmooth or MAT with AnutoneSynth AW the NRC ratings can be increased upto 0.9. With easy installation options AnutoneSlim is ideal choice for education sectors, commercial offices, movie theatres, libraries, retail shops, restaurants and cafes, residential applications - anywhere where you need a surface that can reduce noise and/or act as a noticeboard.
Chilli Red
Sanz
Nautilus
Myst
Aubergine
Silhouette
Exceptional features AnutoneSlim is “hook and loop” receptive, while it is also pin and staple receptive, eliminating unsightly pin holes in the wall. Available in roll form allowing for greater design flexibility. Available in six fashionable colours, offering complete design freedom to complement any decor. The use of specialised non-woven manufacturing processes means AnutoneSlim will not zip or fray. Polyester fibre is safe, non toxic, recyclable, environmentally friendly and highly resistant to fading. AnutoneSlim is also stain and moisture resistant which means it won’t rot or breakdown, providing years of good looks and service.
Lime
Simba
Caution! Colours printed are for indicative purposes only. Actual fabric colours will differ. Please ask for current colours and samples.
3
Installation Drawings
4
Architectural Specifications GENERAL
PRODUCTS
1.01
2.01
Scope A. Supply and install AnutoneSlim Wall System as manufactured by Anutone Acoustics Limited Bangalore – India and as required by the Contract Documents.
A. The system shall consist of site installed and fabricated, concealed AnutoneSlim System as manufactured by Anutone Acoustics Limited Contact details of manufacturer / Authorized dealer
B. Related Work Elsewhere
1.02
•
Preparation of smooth, flat substrate.
•
Architectural Woodwork, Masonry, Doors and Frames, Hardware, Gypsum Drywall, Plastering, Ceilings, Wall Covering Painting and Electrical Work.
1. The System Components shall consist of the following items : a AnutoneStrut CC22 b AnutoneSynth AW 10x25mm. c. AnutoneStick S7 d. MAT White Primer e. AnutoneSlim
and plumb
B. AnutoneSlim : Shall be approved by the consultant / applicator for its suitability. The Manufacturer shall submit the following information concerning the consultant / applicator • Fabric Manufacturer • Width of Fabric • Contents • Color • Flame Retardant • Sample of fabric (at least 300mm x 300mm) • Built up samples (300mm x 300mm)
Standards The AnutoneSlim Wall System shall have less spread of flame & smoke developed in accordance with AS1530 Part 3 testing parameters.
1.03
Qualifications The installation work of this Section shall be performed by an authorized applicator, licensed by the manufacturer.
1.04
Quality Assurance A. The AnutoneSlim shall be pasted over the subsurface directly with the use of AnutoneStick S7 or on MAT Primer with AnutoneStrut CC22.
EXECUTION 3.01
C. The AnutoneSlim shall be installed from the face side after installing the core material and is securely fastened to ensure perfect alignment.
B. Do not install acoustical wall panel fabric in any space until: • The space is enclosed and is weather tight. • All wet work have been completed and is dry. • Painting is completed and wall base and floor covering installed.
Submittal A. Submit manufacturer’s product specifications and such other data as may be required to show compliance with the Contract Documents.
•
B. Submit in writing to the Owner, through the Architect, the manufacturer’s dealer certification. C. Submit installation Dealer’s Limited Warranty against defects in the AnutoneSlim materials and workmanship. D. Installation applicator shall submit a list with a minimum of five (5) comparable installations. 1.06
Product Handling A. Store all materials off the ground and protected from dirt and dust of construction operations. B. Handle materials in a manner that will protect them from damage and soiling.
Existing Conditions A. Examine the condition of the substrate and the conditions under which the work of the Section is to be performed. Notify the Contractor in writing about any unsatisfactory conditions. Do not proceed with the work until the conditions have been corrected in a manner satisfactory to the installer.
B. The AnutoneSlim border shall be pasted completely into the wall / MAT primer creating a clean crisp appearance devoid of raw edges or loose threads.
1.05
Acoustical Wall Treatment System
3.02
All adjacent and related work of other trades have been completed including, in part Architectural Woodwork, Masonry, Doors and Frames, Hardware, Painting, Ceiling Grid, Electrical Work. etc
Installation A. Field measure each wall area, which is to receive the AnutoneSlim treatment to establish the exact layout of the units as shown on elevations. B. Prior to installation, walls and surfaces must be clean, dust free and void of any defects or imperfections. Dents and cracks should be levelled and sealed with proprietary and suitable interior grade materials. All joints in thesubstrate should be taped with a proprietary sealing tape to stop the ingress of dust and foreign particles travelling from the wall cavity through to the fabric.
5
C. Check Installed AnutoneSlim for plumb and straight, flush in proper alignment. D. Cut AnutoneSlim from each roll to the required shape. E. Install directly on the wall with AnutoneStick S7 or, on MAT primer mounted on CC22 (Grouted directly to wall by using AnutoneStitch fasteners at every 600mm centers) with a backing of AnutoneSynth AW 10x25mm. F. Installation shall be timely and applicators shall be courteous and cooperate with other trades 3.03
comply with manufacturer’s instructions for cleaning and repair of minor finish damage. Remove and replace work that cannot be successfully cleaned and repaired to permanently eliminate evidence of damage. B. The Installer shall advise the Contractor of required protection, including soiling from other trades and dust control, so that the work will be without damage and deterioration at the time of acceptance by the Owner.
Cleaning and Protection A. Clean exposed surfaces of wall as necessary,
Tender Specifications Supply and Installation of AnutoneSlim Wall paneling System have a thickness of 10mm that can be installed directly on the wall with AnutoneStick S7 or, on MAT primer mounted on CC22 (Grouted directly to wall by using AnutoneStitch fasteners at every 600mm centers) with a backing of AnutoneSynth AW 10x25mm.
AnutoneSlim
(subject to change without prior notice)
Fibre
100% polyester fibre
Total Product Weight
1600gsm
Total Nominal Thickness
10-12mm
Roll Length/Width
Standard 25m x 1.22m wide
Moisture Absorption
0.006%.Will not rot or smell
Fire Ratings
AS1530 Part 3: Spread of Flame (Index 0-10)0 Smoke Developed (Index 0-10)5 -Tested April 2002, CSIRO AS/NZS 3837:1998: Group Number 3 Average Speci .c Extinction Area:157.7m 2 /kg -Tested August 2004,CSIRO
6
Care and Maintenance
See page 7 of this document or ask your local distributor.
Installation
Installation instructions are included in every pack of tiles, or see page 4-6 of this document, or ask your local distributor.
Quality Standards
Manufactured to ISO 9001 International Quality Standards
General
Test result certificates are available upon request.
Installation Guidelines
General Information Wall and Surface Preparation Prior to installation, walls and surfaces must be clean, dust free and void of any defects or imperfections. Dents and cracks should be levelled and sealed with proprietary and suitable interior grade materials. All joints in the substrate should be taped with a proprietary sealing tape to stop the ingress of dust and foreign particles travelling from the wall cavity through to the fabric. General Wall Use Anutone recommends using putty formulations for semi porous and sealed surfaces such as matt painted timber and cementitious surfaces. Very porous surfaces such as gypsum board should first be sized with a proprietary sealer. Semi gloss and gloss finishes should be lightly sanded and dusted prior to application.
Butt Jointing Method TOOLS REQUIRED
1
• snap off knife • tape measure • hand roller • AnutoneStick S7 2
It is imperative that you plan your installation prior to cutting into the product. We recommend that you “measure twice -cut once.”
Lay a waste cloth onto the floor before applying AnutoneStick S7. The adhesive must be applied to the entire substrate before hanging AnutoneSlim
• • • •
cutting board straight edge waste cloth 6-10mm pile roller and adhesive tray 3
Before hanging the remaining drops you must ensure the first butt joint is tight and no gaps appear, as with all joints when hanging AnutoneSlim
4
Roll the AnutoneSlim drops towards the butt joint first, then roll the entire drop.
•
Before the AnutoneSlim drops are hung, they should be checked for any minor faults which should be cutout. An allowance is given for agreed defects.
•
AnutoneStick S7 should be applied strictly to the manufacturers instructions. Adhesives should be applied to the substrate with a roller, not onto the product.
•
Any adhesive spills or fabric sur face contamination should be cleaned immediately as per the manufacturers recommendations on the care and maintenance guide for this product.
•
The job should be progressively checked and any variations in colour or appearance of variation must be reported to Anutone immediately.
7
Using Rigid Profiles TOOLS REQUIRED –
• snap off knife • cutting board • tape measure • straight edge • hacksaw • hand roller • rigid profiles • AnutoneStick S7 • staple gun and staples • 6-10mm pile roller and tray for the adhesive
1
It is imperative that you plan your installation prior to cutting into the product. We recommend that you “measure twice -cut once.”
5
Using the adhesive roller, apply the adhesive onto the wall - not the product. Leave a gap of 70mm either side of the rigid profiles to allow for tucking the product in.
8
2
We recommend that you install the rigid profiles prior to hanging Composition. Staples can be used on suitable substrates. For concrete surfaces use construction adhesive - this must be used as per manufacturers instructions.
6
Place the drops on the wall overlapping at the top and bottom.
3
Using a piece of Composition width, measure the space between each H-Spline and mark where the H-Spline is to go, then staple the HSpline in place.
7
Using the hand roller, roll the product to ensure adequate adhesion of the product to the wall.
4
Cut AnutoneSlim to the required drop sizes. To avoid any variation in pile direction, ensure all drops are hung in the direction. Use the arrows on the back of the product to ensure you have the directional arrows going the same way, either up or down.
8
Tuck the product into the end caps and top caps.
Using External Corners
Using Internal Corners
Before you staple the external corner in place,you must measure the space required using a piece of Composition to allow the product to be tucked under the profile.
Cut the internal profile to size and staple in place. Using the adhesive roller, apply the adhesive onto the wall, leaving a 70mm gap either side of the internal corner.
9
Maintenance Guidelines AnutoneSlim range of products are extremely durable and require little attention to maintain their good looks. Light vacuuming on a regular basis will prevent dust build up and most marks can be cleaned with a mild detergent solution followed by rinsing and blotting. Stains should be dealt with according to the chart below. •
Before carrying out a proposed cleaning method, apply to a concealed section to ensure it will not affect the adhesive or wall covering Avoid severe abrasion Vacuum to restore pile, but do not use a stiff brush.
• •
Note: Anutone does not recommend solvent based cleaners on AnutoneSlim
A
Stain
Treatment Guide
Stain
Treatment Guide
Blood Burn/Scorch Mark Chewing Gum Chocolate Cooking Oils Crayon/Colour Markers Drinks (cola, tea, juices, beer etc) Dust/Dirt Excrement Grass Grease Ink (ballpoint) Ink (fountain)
A C K I B D C B D C B D C B D C A C Vacuum, then J or C B C C B D C D E A C
Lipstick Mildew Milk Mud Nail Polish Oil Paint (water based) Paint (oil based) Sauces Shoe Polish Urine Vomit Wine
B C A B A B A A B B A A A
E
C
D
E C G D C C H D C D C D C C D Add Salt
C
C
Mop up excess as soon as possible with a sponge or cloth.
B
Remove surplus with a knife edge or appropriate instrument.
C
Sponge with a solutions of carpet shampoo working from well outside the stain in a circular motion towards the centre (this avoids spreading the stain). Sponge afterwards with clean warm water and mop up excess moisture with a clean dry cloth or sponge. Allow to dry then brush gently with a soft brush. If any stain remains, sponge with a solution of one part household bleach to six parts clear water. Thoroughly rinse after treatment.
D
Lightly sponge with household dry cleaning fluid and blot. Apply sparingly, as the substance may have an adverse effect on the adhesive.
E
Sponge with methylated spirits and blot dry.
G
Apply nail polish remover. The nail polish remover should not include lanolin or be of a greasy nature.
H
Sponge with turpentine (or substitute).
I
Freeze with ice cubes and scrape away while cold.
J
Clean with regular extractive carpet cleaner (if possible).
K
Use circular cutter and remove damaged portion. Re-glue new piece into place.
Anutone offers the above recommendations in good faith. However, Anutone cannot be responsible for unsatisfactory results arising from the proposed treatments Anutone recommends that you contact professional cleaning experts should you require further assistance with the cleaning and maintenance of AnutoneSlim.
10
Material Specifications Technially, a typical AnutoneSlim wall panel system comprises visually with or without track material, and acoustically performing core material. Each of these material will have two each componets, in addition to the surface finish and a special adhesive. The specs of these materials, for a typical model, can be:
TECH PRIMER Sl#
Description
1
Thickness (mm)
2
Size (mm)
3
Core
4
Nominal Density (Kg/m3)
5
Weight (Kg/m2)
6
Edge
7
NRC / STC
8
Fire
9
Moisture Resistance (%)
10
Light Reflectance (%)
11
Warranty
12
Installation
13
Color
14
Maintenance
AnutoneSlim 10 / 12 Width upto 1200mm / Length upto 25000 (1 Roll) High Density Polyester fibres NA 1600gsm Square Upto 0.75 Class A RH 90 Color Dependent 5 Years Directly to the wall / Mat by using adhesive 8 Colors Vacuum & Cleaning with mild detergent solutions
BILL OF QUANTITIES (BOQ) - 100M2 Sl #
1
Description
Units
Direct on wall
CC 22 mounting
Thickness
mm
10-12
54-56
-
-
169.2
AnutoneStrut CC22 @600 C/C vertically
AnutoneSlim Composition
2
MAT 600 X 20
-
-
100
3
AnutoneSynth AW
m2
-
100
4
AnutoneStick S7
Ltrs
35
70
5
Fabric
-
100
100
6
Labour
hrs
Estimated Installed Cost / m2
Rs
2300
4400
Assuming area 100m2 (Length 10m & Height 10m) Abbreviation – lm - Linear meter, m2 - Square meter, Ltr - Litre, LS - LumpSum, hrs - Hours
* The above indicated values are very approximate and dependent on several variables. They are for guidance only and subject to change without prior notice.
11
ANUTONE INTERIORS (a division of Anutone Acoustics Limited)
www.anutone.com • Bahrain • Dubai • Mumbai
• Budapest • Chennai • Jeddah • Kolkata • Muscat • Nairobi
ISO 9001:2008 CERTIFIED
ISO 14001:2004 CERTIFIED
Anutone is member of • Dammam • Doha • Kuwait • Manila • New Delhi • Riyadh
Anutone® is a registered trademark of Anutone Acoustics Limited. Specs are subject to change due to continuous improvement programmes at Anutone ®. Contents under copyright registration. No part of this brochure may be reproduced, stored in a retrieval system, scanned or transmitted in any form or by any means electronic, photocopying, recording or otherwise, without the prior written permission of Anutone®.
Document # 909010-500
231, 7th Cross, Indiranagar 1st Stage, Bengaluru 560 038, India Phone +9180 2520 3114 Fax +9180 2520 3115 info@anutone.com