Snazz Brochure by Anutone Acoustics Limited

In association with Danogips Denmark

AnutoneSnazz PLASTERBOARD WALLS & CEILINGS www.anutone.com/plasters.htm

AnutoneSnazz Brochure Release 1.5 May 2009

CONTENTS

Create expressive walls and ceilings with plaster finishes

PRODUCTS Designpanel

Danopanel

Contur

Belgravia

Markant

The coming together of Anutone India and Danogips Denmark with gypsumbased acoustical systems augurs well for the design community in India. The initiative offers you smart interiors - walls and ceilings - that boast a very, very high aesthetic design quotient. The difference between the ordinary and the unique lies in the detail. The observers’ feeling of harmony in a building, the surprise when their eye spots a solution that is more beautiful than expected. Architecture is impressive when functionality blends with aesthetics and forms a perfect whole.

PROPERTIES

All the elements of a building must form integral parts of the whole,

Surfacing

Acoustics

Fire

When dealing with plaster-finished walls and ceilings, Anutone and

Green

Danogip’s multiple resources are at your disposal. We offer you a

Weight

wishes in terms of architectural solutions. If you think of us at the concept

Moisture

stage, you will benefit most from our experience and technical knowledge.

Reflectance

allowing expression of the architect’s language of form and original intent. The walls and ceilings are characterised as an essential feature of the whole building.

partnership that helps you achieve your specifications and meet your

We are competent partners with innovative custom solutions. Helping you turn your creative concepts into implementible solutions is our forte. In our plaster-finished walls and ceilings, we take advantage of the mouldable properties of the material by perforations and patterns which

MISCELLANY

add a different dimension to the aesthetics of architectural spaces. At the

Maintenance

Design Options

New Perforation

At Anutone and Danogips we stress continuous product development to

Applications

ensure that we met the constantly changing requirements of beautiful

Summary

same time, this material offers multiple good properties adding value to buildings. All products are lab-certified and systems-based for a singlesource, one-stop, turnkey solution for your smart interiors.

and persuasive solutions.

CONTENTS

Extensive range of plain and perforated plasterboard offers endless design options Smooth surfaces and clean lines are characteristics of contemporary beautiful, minimalist buildings, and the simplistic expression of the plaster contributes to architectural clarity. It is possible to create elements which recede into the background and do not distract attention from the architectural expression of the room. With plaster, strict and minimalist expression is preserved and the extensive mouldability of the material

also affords wide opportunities for creating individual solutions with a high degree of detailing.

perforations and paint, so that it may be adapted fully to the expression of the room.

The great flexibility of the material, means that functionality and aesthetics can form a synthesis so the finish of the room becomes just as intended.

Beside the evident aesthetic advantages of using plaster, this material also offers a number of other properties which contribute favourably to the building.

With walls and ceilings from Anutone and Danogips, there are infinite combinations of expressions, as the surface of the plaster allows for application of many types of

Plaster can emit and adsorb vapour which makes it play an important part if the building is to have a good indoor climate. Plaster also offers good acoustic properties. Different types of perforation offer varying properties in the form of sound absorption and reflection. This characteristic makes the panels tune the room and render fine acoustic conditions. The glassfibre reinforced gypsum board ensures superior strength and load-bearing properties that results in system durability and reduced maintenance costs. The reflection of light is also easily influenced by the use of plaster, as the surface structure appears highly varied and with different reflective properties, depending on the type of paint applied.

1 Architect - Semren Arkitektkontor Gรถteborg Project - Youth residence, Sweden Product - Designpanel Micro (AnutonePixel)

2 Project - ADNEC Stadium, Abu Dhabi, UAE Product - Designpanel Micro (AnutonePixel)

System highlights – what makes it unique Board Large-format ... jumbo-size panels 1200x2400mm equivalent of 8 tiles of 600x600mm size ... less joints, faster install Seamless ... taper edges along long edges ensure true seamless finish ... faster install and better finish Can be easily used as a base for insitu adhering of thin wallpapers, glassfibre textiles, fabrics and vinyls ...

Tile Gridless ... tiles installed on T-grids with embedded steel clips that results in butt joints that conceal the framework or step edges that reveal a recessed framework Fastener-less ... tiles installed on steel channels with embedded steel clips obviating the need to drive fasteners through tile surface Swing access option ... tiles can be easily swung down for easy access to ceiling plenum to service the utilities

Perforation Invisible ... micro perforations as tiny as 3x3mm squares at 8mm centres ... for the first time ever renders the perforations almost invisible ... Another first ... unique perforations 4x14mm slots at 10/20mm centres that impart direction to ceilings and walls ... Well aligned ... perfectly cut perforations on the most modern machines

Base Glassfibre reinforced gypsum board made from superior gypsum and density for better integrity of perforations, resulting in • more strength and load-bearing • better fire and moisture resistance • durability and lower life-cycle costs

Applications – where we can add value All spaces designed for plain gypsum board and/or modular ceiling tile including but not limited to the following protocols under Selec: • Office - reception, atrium, corridors, open-plan, rooms • Auditorium - lobby, corridors, hall • Cinema - box-office, concessions lobby, auditorium • Hotel - reception lobby, restaurants, night clubs, corridors • Retail - atrium, corridors, shops • Assembly halls, classrooms

Architect - Henning Larsens Tegnestue A/S Project - IT University, Amager FĂŚlledvej, Denmark Product - Designpanel Micro (AnutonePixel)

PRODUCTS

Designpanel Optimum method for large walls and ceilings means using large-size Designpanel with long edges tapered for a true seamless, smooth finish The Designpanel products offer scope for a wall and/or ceiling design with large, continuous surfaces. With the surface area equivalent to 8 conventional tiles, Designpanel ensures lesser joint preparation and faster installation. 2

Designpanels are fitted with tapered edges along the long edges giving an even and smooth intermediate joint filling between panels and reducing cracking.

1 Architect - White Arkitekter Göteborg Project - Medicinskt Kunskabshus, Sweden Product - Designpanel Micro (AnutonePixel) 2 Architect - Liljewall Arkitekter Project - Biotechhuset, Sweden Product - Designpanel Micro (AnutonePixel) 3 Architect - KHR Arkitekter Project - Arlanda Pir F/5:an Arlandaflygplats, Sweden Product - Designpanel Micro (AnutonePixel)

Designpanel Globe AnutoneSircle™

Designpanel Quadril AnutoneSquare™

Designpanel Micro AnutonePixel™

Designpanel Tangent AnutoneSlot™

3 Designpanel Regula - AnutoneSlate

™

Designpanel VARIANTS Designpanel Designpanel Designpanel Designpanel Designpanel

Quadril Globe Micro Tangent Regula

AnutoneSquare AnutoneSircle™ AnutonePixel™ AnutoneSlot™ AnutoneSlate™

™

SIZE

SPECIFICATIONS

1200x2400x12.5mm

Providing and fixing Designpanel Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle /AnutonePixel / AnutoneSlot / AnutoneSlate), as supplied by Anutone Acoustics Limited, an ISO 9001 2000 company.

Please see details at the bottom of this page under ‘Perforations’. FRAMEWORK - DIRECT The wall and/or ceiling is fitted onto AnutoneStrut framework. AnutoneStrut CC25 is installed perpendicularly lengthwise to the Designpanel™ on the wall/ceiling at 300mm centres. The maximum distance for the fasteners is 300mm centres. All short edge joints of Designpanel must be supported.

All dimensions in mm

FRAMEWORK - SUSPENDED The ceiling is fitted onto AnutoneStrut. The system consists of MC45 at 1000mm centres and CC25 at 300mm centres. The hangers are at 900mm centres. The system is constructed with a central distance of 300 mm perpendicularly lengthwise to the Designpanel. All short edge joints must be supported.

All dimensions in mm

DETAIL Designpanel™ on AnutoneStrut framework respectively.

Designpanel on AnutoneStrut direct on surface, wall junction and board connection.

Designpanel on AnutoneStrut system, suspended from soffit, wall junction and board connection.

Framework AnutoneStrut with MC45 at 1000mm centres and CC25 at 300mm centres for ceilings and/or CC25 at 300mm centres direct to surface with packing shims for line & level. Add extra CC25 to support the short edges of panel. Panel Designpanel Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / AnutoneSlate) consisting of perforated GFR gypsum plasterboard made to Euro norms (see note at end) - size 1200x2400x12.5mm with long edges taper installed on AnutoneStrut framework with gypsum fasteners at 300mm centres. Joint finishing AnutoneStrap and AnutoneSeam on the taper edges for true seamless finish. AnutoneSeam only on the fastener heads and short edges. Grit paper is used to ensure smooth surface suitable for painting Painting One coat of gypsum primer and two coats of acrylic roller applied to architect’s specifications. Spray and brush applications are not recommended. Euro norms Sound absorption as per EN 20354; Noise isolation as per EN 20140; Fire reaction as per EN 14190; Green as per DIM (Danish Indoor Climate); Strength & Moisture as per EN 520 & 13964.

PERFORATION The measurements stated in the table indicate the distance from the edge of the board to the centre of the first perforation A: Edge distance B: Section size C: Section distance

Product Designpanel Designpanel Designpanel Designpanel

Size mm Globe AnutoneSircle 1200 x 2400 Quadril AnutoneSquare 1200 x 2400 Micro AnutonePixel 1200 x 2400 Tangent AnutoneSlot 4L 1200 x 2400

Perf % 8.55 11.56 8.41 13.3

A mm 60.0 60.0 62.5 70/60

B mm 480 480 475 460/480

C mm 120 120 125 140/120

Designpanel ANUTONESTRUT INSTALLATION Damp proof barrier is placed over the channels. If the damp proof membrane is placed immediately over the perforations, but under the channels,the ability to absorb the sound is severely reduced. The absorption data depends on a 150 my (µ) plastic foil. A foil with any other thickness will affect the acoustic performance. In order to achieve more sound absorption, AnutoneSynth AW must be a part of the installation. BATTEN - WOOD

be equally wide. The panels are delivered undersized and must be installed with a gap of upto 4mm. The perforated sections must be in line with their own line and be perpendicular to the sections next to them. FITTING The Designpanel™ is screwed onto either wood or steel at every 200mm along the short edges of the panel and in section sizes of 300 x 600mm on the rest of the panels. EXPANSION JOINTS

The ceiling is fitted to a plane wooden batten of 25 x 100mm. The batten is fitted to the rafters or beams with a maximum span of 1000mm centres. The batten is fitted perpendicular lengthwise to the ceiling panel at 300mm centres. The short edges of the panel joints must be supported.

Panel area more than 70m², or in cases where one of the side lengths extend 15m, must be divided by an expansion joint. Slip tape is fitted with an acrylic sealants. Mount the gypsum panels with an edge trim towards the connection, which will give an exact finish and secure attachment of the sealant.

CHANNEL - STEEL

FILLING - IN GENERAL

The ceiling is fitted to a plane steel furring of the CC25 type. The system consists of MC45 at max 1000 mm centres, and CC25 at 300mm centres. Along all walls and edges the wall profiles WC25 are fixed and secured to the channel at max 400mm. The top part of the hangers, of the nonius model, are secured to the above construction at 900mm and attached to the primary MC45 runners with the lower part of the hanger. The cross connector is placed per 300mm and the underlying secondary profiles are secured into them. The short edges of the panel must be supported along its entire length by fixing the panel to the channel system.

Filling of Designpanel™ deviates from the general filling instructions, as the perforations give certain limitations in connection with the filling. The following describes the best possible way of a satisfactory filling, which takes cracks and a ceiling surface without visible joints into account. The condition is, however, that the instructions are followed accurately and that there are no movements in the building and the construction of the ceiling.

GROUPING The starting point for the fitting of the design panels where a level line can be achieved through the whole fitting area. The first row is fitted along a string in order for the perforated sections to be in line. The fitting is started in the middle of the room, as far as possible, the Designpanels are fitted from the middle towards each side in order for the friezes to

Straight cut short edges and joints are filled with AnutoneSeam filler. Ensure that straight and cut edges have a gap of 3-4mm and are bevelled and primed before the filling is started. AnutoneSeam is used for filling screw heads and tapered joints. Tapered joints must be taped with AnutoneStrap. Cover the proximate perforations with tape before filling the joints FILLING PROCESS - ‘A’, STRAIGHT EDGES Fill the joints well and pinch the AnutoneSeam up between the panels. Cut off any excess material after 45 minutes, as it hardens quickly. It is important to remove any excess filler in order to obtain a clean transition to the ceiling surface. Grind off minor

irregularities. Finish off with a filling as described under third filling. FILLING PROCESS - ‘B’, TAPERED EDGES – First filling Use a 2-inch filling knife and apply AnutoneSeam, so it spreads onto the filling tape and into the crack between the panels. The filling ought to be carried out in such a way that a final grinding is unnecessary once the filler has hardened completely. – Second filling AnutoneSeam is also used for the second filling. By resting the hand against the Designpanel the filling knife is wielded along the middle of the first filling-first on one side then on the other. Use a 2-inch filling knife and apply the filler twice. The filling ought to be carried out in such a way that a final grinding is unnecessary once the filler has dried completely after 24 hours. – Third filling Use AnutoneSkim for the third filling, which has to be a very thin coat and use a 4-inch filling knife. Wield the filling knife with a uniform and gliding motion in order to minimise the final grinding. When the filler has dried, sandpaper the surface. PAINT On account of the acoustic felt backing use a roller in order for the primer and paint not to stick to the acoustic felt backing. Use a roller with fine mohair, which ensures a thin coat of paint at a time. Spray painting will affect the acoustic properties and is therefore not recommendable. Prime the whole ceiling surface with gypsum primer in order for the fillings and boards to absorb evenly. Subsequently, finish with 1 to 2 coats of acrylic emulsion paint. MAINTE NANCE The treated ceiling can be vacuumed or wiped with a damp cloth, which has been dipped in a mild solution of synthetic detergent. After-treatment, as well as covering of major damages and severe smudges, can be carried out by painting with a roller. The treatment does not reduce the acoustic properties.

Danopanel Properties and materials harmonised to create simple and pure wall/ceiling lining - Danopanel Danopanel features a monolithic, line-divided surface. The tiles are butt-jointed with fine bevelled edges. The panelling is supplied ready-painted and fitted without visible screws. Since there is no handling by painters, installation time is short, achieving a good overall economy. Direct screw-fixing onto the AnutoneStrut metal channel system ensures a low installation depth. 2

1 Architect - Arkitekt Erik Eriksen Project - Day-care centre, Maglekærvej, Denmark Product - Danopanel Globe (AnutoneSircle) 2 Architect - Asger Bergo Friis Project - Ruds Vedby Skole SFO - Denmark Product - Danopanel Quadril (AnutoneSquare)

Danopanel Globe AnutoneSircle™

Danopanel Quadril AnutoneSquare™

Danopanel Micro AnutonePixel™

Danopanel Regula AnutoneSlate™

Danopanel VARIANTS Danopanel Danopanel Danopanel Danopanel

Quadril Globe Micro Regula

AnutoneSquare AnutoneSircle AnutonePixel AnutoneSlate

SIZE

SPECIFICATIONS

600x600x12.5mm

Providing and fixing Danopanel Quadril / Globe / Micro / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlate), as supplied by Anutone Acoustics Limited, an ISO 9001 2000 company.

Please see details on next page under ‘Perforations’. FRAMEWORK Danopanel must be screw fixed to AnutoneStrut CC25 channels at 300 mm centres.

Framework AnutoneStrut with MC45 at 1000mm centres and CC25 at 300mm centres for ceilings and/or CC25 at 300mm centres direct to surface with packing shims for line & level. Tile Danopanel Quadril / Globe / Micro / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlate) consisting of perforated GFR gypsum tile made to Euro norms (see note at end) - size 600x600x12.5mm, white painted as standard, with all edges finebevelled and embedded steel clips installed on AnutoneStrut framework with gypsum fasteners driven through the clips.

All dimensions in mm

DETAIL Joint finishing Tiles are butt jointed and require no further finish. Painting Tiles are pre-painted Global White Gloss 5 and require no further painting. Danopanel, frieze connection.

Architect - Arkkitehtitoimisto Hyvämäki Karhunen Parkkinen Project - Hotel Scandic Simonkenttä, Finland Product - Designpanel Globe (AnutoneSircle)

Euro norms Sound absorption as per EN 20354; Noise isolation as per EN 20140; Fire reaction as per EN 14190; Green as per DIM (Danish Indoor Climate); Strength & Moisture as per EN 520 & 13964; Light reflectance as per DIN 5036-3.

Danopanel INSTALLATION Danopanel is fastened to the concealed framework system, AnutoneStrut, using a plain-end screw, . It should be noted that the panels must be turned around from row to row and this influences the position of the middle channel piece.

Storage and installation should not be carried out in rooms with a relative humidity greater than 70 per cent, unless otherwise stated. It is equally important to take account of other work such as technical installations before installation of the ceiling is carried out. It is important for the end result that the ceiling tiles are installed at right-angles, this also makes installation quicker and easier. It is not recommended that ceilings are installed at a temperature consistently over 500 C.

Layout Generally start setting out from the centre of the room. The Danopanels are installed on metal channels, AnutoneStrut. The channels are spaced at 300 mm centres.

Installation Begin the installation of first row from the centre of the room using a chalk line. The Danopanels are screw fixed through the holes in the factory mounted clips. On the next rows of panels the clips can slide in behind the adjacent panels thus only screw fixing the clips on the other side etc.

Adustments Cuttings and adjustments of the panels can be carried out by a fine tooth saw or a Stanley knife. If the last row is a full size panel, the clips should be cut. If the panels have to be cut to a smaller width the clips shall be removed and refixed onto the cut panel.

Frieze The last row of tiles can also be screw fixed directly through the Danopanel. The posi ti on of the screws shall be max.30 mm from the clips behind the panel.

PERFORATION The below measurements indicate the distance from the edge of the board to the centre of the first perforated hole: A: Edge distance B: Section size

Perforation Danopanel Globe Danopanel Quadril Danopanel Micro Danopanel Tangent Danopanel Regula

AnutoneSircle AnutoneSquare AnutonePixel AnutoneSlot AnutoneSlate

Size mm 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600

Perforation % 10.2 13 10.2 NA Nil

A mm 37.5 45 37.5 NA NA

B mm 525 510 525 NA NA

Tectopanel

Infinite possibilities are achievable Tectopanel is the cladding that provides greatest scope for variation. It is available in a number of different sizes, with a choice of perforations. Painting is done insitu and the panels can be arched. In terms of design, Tectopanel is close to Contur and Danopanel, for which reason it can be easily integrated. SIZE 600 x 600 x 12.5 mm 600 x 1200 x 12.5 mm 600 x 2400 x 12.5 mm

Architect - Arkkitehtitoimisto Larkas & Laine Oy Project - Office building Outokumpu, Finland Product - Tectopanel Quadril (AnutoneSquare)

Contur Aesthetics and acoustics enhanced by subtle perforation on Contur Contur, like Danopanel, gives the appearance of a monolithic surface finished with fine line markings. The perforations on Contur appear more distinctly than on other types of ceilings in terms of aesthetics, and therefore will accentuate the acoustical solution selected.

Choosing fixed dados, arches or folded plaster achieves an elegant framework to the ceiling. Contur tiles are butt-jointed with a fine bevel edge such that the installation results in a concealed T-grid appearance. There are no fasteners driven through the tile. 3

1 Architect - Dall & Lindhardtsen Project - Grammar School, Nærum, Denmark Product - Contur Globe (AnutoneSircle) 2 Architect - Sisustusarkkitehdit GullsténInkinen Oy Project - Teknos Oy, Rajamäki, paint factory, Finland Product - Contur Globe (AnutoneSircle) 3 Architect - Suunnittelukeskus Oy Project - Health care centre Kerava, Finland Product - Contur Globe (AnutoneSircle)

Contur Globe AnutoneSircle™

Contur Quadril AnutoneSquare™

Contur Micro AnutonePixel™

Contur Tangent AnutoneSlot™

Contur Regula - AnutoneSlate™

Contur SIZE

VARIANTS Contur Quadril Contur Globe Contur Micro Contur Tangent Contur Regula Please see details on

AnutoneSquare 600x600x12.5mm AnutoneSircle AnutonePixel AnutoneSlot AnutoneSlate next page under â&#x20AC;&#x2DC;Perforationsâ&#x20AC;&#x2122;.

FRAMEWORK The suspension hanger must be fixed to the AnutoneSkelet Main-T at 1500 mm centres and not less than 100 mm from the wall angle. At joints of Main-T, hangers shall be fixed. AnutoneSkelet spacer bars shall be fixed maximum 100 mm from the hangers.

SPECIFICATIONS Providing and fixing Contur Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / AnutoneSlate), as supplied by Anutone Acoustics Limited, an ISO 9001 2000 company. Framework AnutoneSkelet with Main-T parallel at 600mm centres and Spacer Bar at 1500mm centres. Tile Contur Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / AnutoneSlate) consisting of perforated GFR gypsum tile made to Euro norms (see note at end) - size 600x600x12.5mm, white painted as standard, with all edges fine-bevelled and embedded steel clips installed on AnutoneSkelet framework. Joint finishing Tiles are butt jointed, concealing the AnutoneSkelet framework, and require no further finish.

All dimensions in mm

DETAIL

Painting Tiles are pre-painted Global White Gloss 5 and require no further painting.

Cross section 1, Contur with painted fix frieze of AnutoneSlate gypsum board screw-fixed on AnutoneSkelet T35

Cross section 2, Contur with painted fix frieze of AnutoneSlate gypsum board screw-fixed on AnutoneSkelet T35

Longitudinal section, Contur with painted fix frieze of AnutoneSlate gypsum board screw-fixed on AnutoneSkelet T35

Longitudinal section, Contur with AnutoneSkelet shadow wall angle

Cross section 3, Contur with AnutoneSkelet shadow wall angle

Cross section 4, Contur with AnutoneSkelet shadow wall angle

Contur COMPONENTS AnutoneSkelet T24 system is made from galvanised steel. The exposed sections are painted in CMC 001 Global white (equivalent to NCS 0902 G48 ).

MAIN RUNNER WxLxH 24 x 3600 x 38

ADJUSTABLE HANGERS Length 120-200 to 1000-1940

SPACER BAR L 600 Perimeter shadowline WxLxH 12 19 x 3050 x 10 24

Perimeter L-angle WxLxH 19 x 3050 x 32

INSTALLATION Storage and installation should not be carried out in rooms with a relative humidity greater than 70 per cent, unless otherwise stated. It is equally important to take account of other work such as technical installations before installation of the ceiling is carried out. It is important for the end result that the ceiling tiles are installed at right angles. This makes installation quicker and easier. It will also facilitate inspections to installations above the ceiling as removal of the tiles will be easier. It is not recommended that ceilings are installed at a temperature consistently over 500C.

Setting out The position of the wall angle should be marked on the walls and columns. The bottom flange of the wall angle is the level of the proposed ceiling.

Wall Trim The wall angle should be fixed at max. 300 mm centres. At corners the wall angle should be mitred accurately.

Layout Generall start setting out from the centre of the room ensuring that perimeter edge cuts are of equal size on both sides of the room. The positioning of light fittings, ventilation units and sprinkler heads should be considered at this stage.

Hangers The adjustable hangers should be fixed with screws, angle brackets, soffit cleats or similar. It is important that suspension is plumb. The MainT are fixed parallel at 600 mm centres.

Main T The hanger must be fixed to the Main T at 1500 mm centres and not less than 100 mm from the wall angle.

Joining the Main T The main T have interlocking tongues at both ends enabling them to be joined together, an additional hanger must be used at this point

Checking the framework When the framework is installed, the levels and angles should be checked and if necessary the hangers adjusted. The spacer bar should be installed at a maximum of 100 mm from the hangers and with a distance of max 1500 mm centres.

Tiles The level of the tiles should be checked when the installation is completed. Gloves should be worn at all times when handling the tiles and a saw or knife used to cut the tiles to size.

PERFORATION The below measurements indicate the distance from the edge of the board to the centre of the first perforated hole: A: Edge distance B: Section size

Perforation Contur T24 Globe Contur T24 Quadril Contur T24 Micro Contur T24 Tangent Contur T24 Regula

AnutoneSircle AnutoneSquare AnutonePixel AnutoneSlot AnutoneSlate

Size mm 600 x 600 600 x 600 600 x 600 600 x 600 600 x 600

Perforation % 10.2 13 10.2 19.7 Nil

A B mm mm 37.5 525 45 510 37.5 525 50/45 500/510 NA NA

Belgravia Easy and effortless performance secured by geometrical characteristics of Belgravia Belgravia is a ceiling with a grid system that is semi-recessed. Supplied with tegular and bevelled edges, the tiles guarantee a very directionally stable ceiling and are less sensitive to damaging the edges. While being installed, they fall into place in the suspension system with distinct ease and simplicity. 3

1 Architect - Suunnittelukeskus Oy Project - Health care centre Kerava, Finland Product - Belgravia Globe (AnutoneSircle) 2 Architect - Brizac Gonzales Arkitekter, England og Frenning & Sjögren Arkitekter, Göteborg Project - Världskulturmusseet, Sweden Product - Belgravia Micro (AnutonePixel) 3 Architect - MA Arkitekter Borås Project - Åhlénshuset, Sweden Product - Belgravia Micro (AnutonePixel) 4 Architect - François Benedini Project - MEDEF, France Product - Belgravia Tangent (AnutoneSlot)

Belgravia Globe AnutoneSircle™

Belgravia Quadril AnutoneSquare™

Belgravia Micro AnutonePixel™

Belgravia Tangent AnutoneSlot™

Belgravia Regula - AnutoneSlate™

Belgravia VARIANTS Belgravia Belgravia Belgravia Belgravia Belgravia

Quadril Globe Micro Tangent Regula

AnutoneSquare AnutoneSircle AnutonePixel AnutoneSlot AnutoneSlate

SIZE

SPECIFICATIONS

600 x 600 x 12.5 mm

Providing and fixing Belgravia Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / AnutoneSlate), as supplied by Anutone Acoustics Limited, an ISO 9001 2000 company.

Please see details at the bottom of this page under â&#x20AC;&#x2DC;Perforationsâ&#x20AC;&#x2122;. SUSPENSION SYSTEM AnutoneSkelet Main-T/U are suspended at 1200mm centres. Cross-T may not exceed 600 mm, and shall be made from 1200 mm Cross-T. The suspension hanger must be fixed to the main runner at 1200 mm centres and not less than 400 mm from the wall angle.

Framework AnutoneSkelet with Main-T at 600mm centres and Cross-T at 600mm centres to form a regular 600x600mm grid. Tile Belgravia Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / AnutoneSlate) consisting of perforated GFR gypsum tile made to Euro norms (see note at end) - size 600x600x12.5mm, white painted as standard, with all edges fine-bevelled installed on AnutoneSkelet framework. Joint finishing Tiles have a step edge, exposing a recessed AnutoneSkelet framework, and require no further finish.

Measurements are in mm.

DETAIL

Painting Tiles are pre-painted Global White Gloss 5 and require no further painting.

Belgravia 600 with shadow line edge trim T15

Architect - YRM, London, EC1 Project - Northwick Park Hospital, England Product - Belgravia Quadril (AnutoneSquare)

Belgravia 600 with shadow line edge trim T24

PERFORATION The below measurements indicate the distance from the edge of the board to the centre of the first perforated hole: A: Edge distance B: Section size

Perforation

Size mm Belgravia T15 Globe AnutoneSircle 584.5 x 584.5 Belgravia T15 Quadril AnutoneSquare 584.5 x 584.5 Belgravia T15 Micro AnutonePixel 584.5 x 584.5 Belgravia T15 Tangent AnutoneSlot 584.5 x 584.5 Belgravia T15 Regula AnutoneSlate 584.5 x 584.5 Belgravia T24 Globe AnutoneSircle 575.5 x 575.5 Belgravia T24 Quadril AnutoneSquare 575.5 x 575.5 Belgravia T24 Micro AnutonePixel 575.5 x 575.5 Belgravia T24 Tangent AnutoneSlot 575.5 x 575.5 Belgravia T24 Regula AnutoneSlate 575.5 x 575.5

Perf % 10.2 13.0 10.2 21.3 Nil 10.2 13.0 10.2 21.3 Nil

A mm 29.75 36.75 29.75 32/27 NA 25.25 32.00 25.25 7.5/22.5 NA

B mm 525 510 525 520/530 NA 525 510 525 520/530 NA

Belgravia COMPONENTS AnutoneSkelet framework is made from galvanised steel. The exposed sections are painted in CMC 001 Global white (equivalent to NCS 0902 G48Y). AnutoneSkelet T15 or U15 is used. MAIN RUNNER WxLxH 15 x 3000 x 38

AnutoneSkelet U15

ADJUSTABLE HANGERS Length 120-200 to 11000-1940

CROSS TEE WxLxH 15 x 300 x 38 15 x 600 x 38 15 x 1200 x 38 WALL ANGLE Bx L x H 19 x 3050 x 32 SHADOW LINE EDGE TRIM W x L x H 15+15 x 3050 x 8+25

STORAGE & INSTALLATION Storage and installation should not be carried out in rooms with a relative humidity greater than 70 per cent, unless otherwise stated, see section Moisture. It is equally important to take account of other work such as technical installations before installation of the ceiling is carried out. It is important for the end result that the ceiling tiles are installed at right angles. This also makes installation quicker and easier.It will also be easier to carry out inspections to installations above the ceiling as removal of the tiles will be easier. It is not recommended that ceilings are installed at a temperature consistantly over 50 째C.

Setting out The position of the wall angle should be marked on the walls and columns. The bottom flange of the wall angle is the level of the proposed ceiling.

Wall Angle The wall angle is fixed to the wall at maximum 300 mm centres. At corners the angle should be mitred accurately.

Layout Generally start setting out from the centre of the room ensuring that perimeter edge cuts are of equal size on both sides of the room. The positioning of light fittings, ventilation units and sprinkler heads should be considered at this stage.

Hangers The adjustable hangers should be fixed with eye screws, angle brackets or similar. If direct hangers are used they should be screwed to the soffit. Start with the first hanger not more than 400 mm from the wall in the longitudinal direction of the Main-T, and then at a maximum of 1200 mm centres. If additional fixtures are fixed to the suspension system, extra hangers should be used.

Main T The main T are installed parallel to each others at 1200 mm or 600 mm, centres depending on system module. The main runners have interlocking tongues in both ends, and can be locked together.

Cross Tees The cross-T are installed by inserting snap-in tongues into the correct slot on the stalk of the main T and are locked into position by a slight downward pressure. If the cross-T is not continued into the adjoining module, the tongue has to be split and bent flat.

Checking the Framework When the suspension system is installed, the levels and angles should be checked and if necessary the hangers adjusted.

Tiles The level of the tiles should be checked when the installation is completed. Gloves should be worn at all times when handling the tiles and a saw or knife used to cut the tiles to size.

Markant Classical ceiling solution achieved with Markant modules Markant is a classic ceiling solution, featuring strong shaded markings between ceiling panels due to stepped (tegular) edge profile. The ceiling will often be seen fitted into a pattern adapted to the shape of the room, thus making the design light-weight and dynamic. The fine bevelled and stepped edges of the ceiling panel ensure easy, straightforward assembly, and combined with recessing into the suspension system this provides a directionally stable ceiling. The T-grid is exposed. Swing access is an option.

2 3

1 Architect - Dissing og Weitling Project - Office building, Rådhusparken, Glostrup, Denmark Product - Markant Micro (AnutoneSquare) 2 Architect - BM Arkitkter AB Project - Dahlslundsskole, Åkarp, Sweden Product - Markant Micro (AnutoneSquare) 3 Architect - Stylt Trampoli AB Göteborg Project - Hotel Scandic Rubinen, Sweden Product - Markant Micro (AnutoneSquare)

Markant Globe AnutoneSircle™

Markant Quadril AnutoneSquare™

Markant Micro AnutonePixel™

Markant Tangent AnutoneSlot™

Markant Regula - AnutoneSlate™

Markant VARIANTS Markant Markant Markant Markant Markant

Quadril Globe Micro Tangent Regula

AnutoneSquare AnutoneSircle™ AnutonePixel™ AnutoneSlot™ AnutoneSlate™

™

SIZE

SPECIFICATIONS

600x600x12.5mm (with swing function, T24, option)

Providing and fixing Markant Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / AnutoneSlate), as supplied by Anutone Acoustics Limited, an ISO 9001 2000 company.

Please see details on next page under ‘Perforations’. FRAMEWORK The suspension hanger must be fixed to the Main-T at 1200 mm centres and not less than 400 mm from the wall angle. The Cross-T is not to exceed 600 mm that are derived from Cross-T 1200mm to ensure a finished 600x600mm grid size.

Framework AnutoneSkelet with Main-T at 600mm centres and Cross-T at 600mm centres to form a regular 600x600mm grid.

All dimensions in mm

Tile Markant Quadril / Globe / Micro / Tangent / Regula (AnutoneSquare / AnutoneSircle / AnutonePixel / AnutoneSlot / SAnutoneSlate) consisting of perforated GFR gypsum tile made to Euro norms (see note at end) - size 600x600x12.5mm, white painted as standard, with all edges finebevelled and embedded steel slips, installed on AnutoneSkelet framework. Joint finishing The steel clips embedded in the tiles ensure a step edge, exposing a recessed AnutoneSkelet framework, and require no further finish.

DETAIL

Painting Tiles are pre-painted Global White Gloss 5 and require no further painting. Markant with frieze of AnutoneSlate.

Markant with wall angle.

Markant with shadow wall angle.

Markant with painted fix frieze of AnutoneSlate gypsum board screw-fixed on AnutoneSkelet T35.

1 Architect - Arkitektgruppen Aarhus Project - Town Hall, Greve, Denmark Product - Markant Micro (AnutoneSquare) 2 Architect - Aukett Ltd, SW11. Project - SAS Radisson, England Product - Markant Regula (AnutoneSlate)

Markant COMPONENTS AnutoneSkelet framework is made from galvanised steel. The exposed sections are painted in CMC 001 Global white (equivalent to NCS 0902 G48). MAIN RUNNER WxLxH 15 x 3000 x 38

SHADOW LINE EDGE TRIM W x L x H 10 +24 x 3050 x 12 +19

ADJUSTABLE HANGERS Length 120-200 to 1000-1940

CROSS TEE WxLxH 15 x 600 x 38 15 x 1200 x 38 WALL ANGLE WxLxH 19 x 3050 x 32

Settingout The position of the wall angle should be marked on the walls and columns.The bottom flange of the wall angle is the level of the proposed ceiling.

Wall Angle The wall angle is fixed to the wall at maximum 300 mm centres. At corners the angle should be mitred accurately.

Hangers The adjustable hangers should be fixed with eye screws, angle brackets, soffit cleats or similar. Start with the first hanger not more than 400 mm from the wall in the longitudinal direction of the main T, and then at a maximum of 1200 mm centres. If additional fixtures are fixed to the suspension system, extra hangers should be used.

Main T The main T are installed parallel to each other at distances 1200 mm or 600 mm centres depending on system module. The main T have interlocking tongues in both ends, and can be locked together.

Cross T The cross-T are installed by inserting snap-in tongues into the correct slot on the stalk of the main runner and are locked into position by a slight downward pressure. If the cross-T is not continued into the adjoining module, the tongue has to be split and bent flat.

Checking the Framework When the framework is installed, the levels and angles should be checked and if necessary the hangers adjusted.

Tiles The level of the tiles should be checked when the installation is completed. Gloves should be worn at all times when handling the tiles and a saw or knife used to cut the tiles to size.

PERFORATION The below measurements indicate the distance from the edge of the board to the centre of the first perforated hole: A: Edge distance B: Section size

Perforation

Size Perforation A B mm % mm mm Markant T15 Globe AnutoneSircle 585 x 585 10.2 30 525 Markant T15 Quadril AnutoneSquare 585 x 585 13 37.5 510 Markant T15 Micro AnutonePixel 585 x 585 10.2 30 525 Markant T15 Tangent AnutoneSlot 585 x 585 NA NA NA Markant T15 Regula AnutoneSlate 585 x 585 Nil NA NA Markant T24 Globe AnutoneSircle 575.5 x 575.5 10.2 25.25 525 Markant T24 Quadril AnutoneSquare 575..5 x 575.5 13 32.75 525 Markant T24 Micro AnutonePixel 575..5 x 575.5 10.2 25.25 525 Markant T24 Tangent AnutoneSlot 575.5 x 575.5 19.7 37.75/32.75 500/510 Markant T24 Regula AnutoneSlate 575.5 x 575.5 Nil NA NA

PROPERTIES

Surfacing Danoline ceilings are manufactured from high grade gypsum boards. A gypsum board is manufactured as a gypsum core sandwiched between two layers of cardboard liner. In structure and texture, the board is reminiscent of watercolour paper. It is precisely the surface of the cardboard liner that makes it ideal for coating with many types of paint, foils and similar applications. In addition to the fine technical properties of the surface, the flexibility of the board allows punching in the form of perforation holes, amongst other things. Danoline gypsum products can, therefore, take a great variety of appearances, capable of supporting any design assignment. The structure of the board surface is reminiscent of a canvas and you can choose the colours you wish to have on the palette.

A description is given below of some of the many possibilities offered by the gypsum board surface: •

Finished products can be flush-mounted and special paint added, as an impregnating technique leaves edges, perforation holes and surfaces with the same colour

•

Low-gloss surfaces emphasize the terracotta finish while high-gloss surfaces emphasise the metallic appearance

•

Foil coatings can be used to create better resistance to humidity and facilitate easier maintenance

•

Untreated products can also be joined to avoid visible joints. This imparts to the ceiling a monolithic surface, which can be further refined by using perforated ceiling panels on parts of the ceiling

•

Products supplied in untreated form can be painted insitu. It is thus possible to apply glazing, stippling, marbling, graining and so on

1 Architect - S og I arkitekter Project - Office building; OBH Group, Denmark Product - Designpanel Micro (AnutonePixel)

2 Architect - Dall & Lindhardtsen Project - Holbæk Hospital, Denmark Product - Contur Globe (AnutoneSircle) 2

Acoustics 1

For several centuries the flexibility and mouldable properties of gypsum have inspired beautiful decorative work. Today, production of the material has been industrialised. But the flexibility and mouldability of gypsum are nevertheless exploited. This means being able to punch perforation holes and patterns, which, as well as adding aesthetic qualities, also makes for good acoustic properties. The acoustic properties are achieved partly by vibrations in the panelling material and partly by generating resonance by means of air gaps in the perforation. The result is a loss of acoustic power: sound absorption. Plain tiles exploit vibrations in the panelling material to achieve sound absorption in the low frequencies. Plain tiles can be used in conjunction with perforated tiles, e.g. in lecture halls where the fine reflective properties of the board ensure good dispersion of speech sound.

Square and circular perforated tiles provide good sound absorption in the mid frequency range. This is where the consonants containing the most important signals in our comprehension and perception of the spoken language are located. Partial perforations provide good sound reflection and hence good dispersion of speech sound. It is recommended using these types of perforations in medium sized rooms with hard materials or in larger rooms with a good spread of furniture, carpeting and suchlike. The micro-perforated tile is very special and used where good sound absorption is desired throughout the frequency range. Micro-perforated boards can be used where acoustic conditions are more critical, which is typically the case in large, high-ceilinged rooms, schools and institutions. Early in the planning of a room, it is possible to compute its acoustic qualities by extrapolation. Most materials used in buildings have sound absorption, and the important thing is simply to weigh the sum of materials over the whole frequency range linearly. Final regulation is usually done in the choice of ceiling and wall absorbents. It is important to choose a sound-absorbing product based on its absorption profile. The quality and balance of acoustic conditions can be compared with tuning a musical instrument: acoustic ceiling panels tune the room and give it the right sound. Danoline gypsum products come with an important advantage that they can be maintained without any deterioration to their acoustic products. (see section on maintenance). Sound absorption measurement is performed in a reverberation chamber in accordance with EN 20354. Classification and transcription to the practical absorption value are done in accordance with EN 11654. Danoline products offer ideal acoustic conditions in classrooms, for example. The sound is spread out to the audience without the interference of reverberations. The same combination of acoustic properties can be used with advantage in offices. When making a rough estimate, the absorption coefficients shown on the following page can be used irrespective of the product chosen. Where special acoustic tasks call for fine tuning, information can be obtained on products’ specific sound absorption by contacting Anutone’s AnutoneSquad.

1 Architect - Arkitektfirmaet Rudolf Lolk A/S Project - Architect’s Practice, Rudolf Lolk A/S, Denmark Product - Designpanel Micro (AnutonePixel) 2 Architect - Arkkitehdit Gullichsen Vormala Ky Project - Technical Research Center of Finland (Mittatekniikka), Finland Product - Designpanel Micro (AnutonePixel)

The positioning of sound absorbing acoustical panels will have a great bearing on room acoustics. Incorrect placement can accentuate unwanted sounds. Examples of room shapes and optimal placement are given below. Small rooms with normal ceiling height and furniture density are fitted with smooth, plain tiles (AnutoneSlate Regula) with some perforated tiles (AnutonePixel Micro, AnutoneSircle Globe, AnutoneSquare Quadril).

Adjoining rooms of identical size communicating openly, may act as sound amplifiers in relation to each other. Sound absorbent materials therefore need to be fitted in both the rooms.

In larger rooms, perforated tiles should be used (AnutonePixel Micro, AnutoneSircle Globe, AnutoneSquare Quadril).

Reverberation periods must be adjusted so that transitions between rooms act as acoustic sluices. It is therefore suboptimal to position attenuated rooms, and rooms with long reverberation times as adjoining rooms; a room with a mediumattenuated acoustic climate must be positioned between the rooms.

In rooms larger than 200 mÂ˛, where criteria is to dampen the high frequencies in particular, panels perforated with small holes should be fitted (AnutonePixel Micro). It is emphasised that the above division into room size and type of ceiling panel constitutes general guidelines. For instance, microperforated tiles can of course be used in both small and medium-size rooms etc. For specific tasks it may be advisable to consult an acoustician in order to achieve an optimal acoustic design for the room. Large, low-ceilinged rooms may present problems with stray sound. Sound absorbers should therefore be interpolated, e.g. in the form of beams or projections.

In lecture halls, possible projections in the ceiling surface should be clad with vertical absorbents in order to avoid a delayed echo.

Mutually acute angled surfaces should both be fitted with Danoline range of products.

Lecture halls or auditoria must not only emphasise the speakerâ&#x20AC;&#x2122;s sound but also attenuate unwanted reflections. This is why reflective surfaces are used above the speaker, while absorbent surfaces are positioned opposite the speaker.

Used in combination, concave or convex surfaces can provide varying acoustic conditions. However, they should not be used for normal acoustic tasks. Therefore, if differing spatial effects are required, surfaces can be provided with panelling with different degrees of perforation.

Domes, rotundas or cradle vaults collect sound at the constructional centre. The sounds are therefore heard as powerful echoes. In order to limit this effect, the constructional centre is placed a good distance overhead.

Along walls or longitudinally in cradle vaults, sound is amplified. Sound can thus be carried a long way before it eventually settles. In order to avoid this effect, absorbers are inserted.

In rooms with high ceiling, both ceiling and wall surfaces located above normal storey height must be sound regulated. In order to prevent an echo, absorbents should be used on whole wall surfaces in large rooms.

Wall and Ceiling Linings Being hard absorbents, and by virtue of their moderate sound absorption and good sound reflection, Danoline products offer ideal acoustic conditions in class rooms, for example. The sound is spread out to the audience without the interference of reverberations. The same combination of acoustic properties can be used with advantage in offices. AnutoneSircle Designpanel, on 45 mm metal channel and with 45 mm mineral wool

AnutoneSircle Designpanel on metal channel and 200 mm mineral wool

AnutoneSquare Designpanel, on 45 mm metal channel and with 45 mm mineral wool

AnutoneSquare Designpanel on metal channel and 200 mm mineral wool

AnutonePixel Designpanel on 45 mm metal channel and with 45 mm mineral wool

AnutonePixel Designpanel on metal channel and 200 mm mineral wool

Suspended Ceilings AnutoneSlate, E200

AnutonePixel, E200

AnutoneSircle, E200

AnutoneSircle, E200 mm with 25 mm Mineral Wool

AnutoneSquare, E200

AnutoneSircle, E200 with 50 mm Mineral Wool

The need for a ceiling to reduce crosstalk occurs where the desire for a continuous ceiling construction is combined with honeycombing the overall space into smaller compartments. The design therefore provides great freedom of choice with regard to creating or moving walls. Gypsum naturally has a high bulk density. Therefore its weight gives naturally good noise reduction. Coupled with soft absorbent, AnutoneSynth, overlaid on the ceiling tiles; good noise reduction from room to room is achieved throughout the frequency range. Noise-reducing characteristics can be varied further by selecting different densities and thicknesses of AnutoneSynth. In addition to its noisereducing properties, the construction has good sound-absorbent properties throughout the frequency range. Particularly, in the bass frequencies sound absorption is very good.

NOISE REDUCTION VALUES Non-perforated ceiling Regula R, plain, 200 mm suspended.

Perforated ceiling 200 mm suspended with 25 mm mw.

Dn,c,w = 35 dB

Dn,c,w = 36 dB

Perforated ceiling 200 mm suspended

Perforated ceiling 200 mm suspended with 50 mm mw

Dn,c,w = 23 dB

Dn,c,w = 41 dB Architect - Hamsdokka & Pedersen, Porsgrunn Project - GrĂ¸nli School, Norway Product - Belgravia Quadril (AnutoneSquare)

Noise reduction measurements on ceilings are performed in accordance with EN 20140-9 and ASTM E 1414. In accordance with the standard, a continuous ceiling connected to a wall is installed. Reverberation time, background noise and noise reduction are measured in the two demarcated rooms and the results classified in accordance with ASTM E 413.

Fire Gypsum is naturally contained in seawater. Over millions of years gypsum has been deposited naturally in seawater basins. Today, gypsum is found in thick strata from which it is excavated. In terms of weight, a gypsum crystal consists of 25 crystalline water, which is released in the form of steam on heating. In popular terms, gypsum contains a natural sprinkler, and crystal line water makes gypsum products well suited for fire protection. 1

Gypsum is fire protective When gypsum is to be used for suspended ceilings, it is required to meet the stipulation of being fire protective. The requirement includes testing energy content, fire propagation and smoke formation.In certain countries, the test is supplemented with a toxicity test. Danolineâ&#x201E;˘ products meet the most rigorous fire requirements and score among the best fire ratings. European classification Material class A2-s1, d0 EN 13501-1 2

1 Architect - Initiative in Design Project - Sir Williams Perkins School, England Product - Belgravia Micro (AnutonePixel) 2 Project - Office Product - Designpanel Tangent (AnutoneSlot) 3 Architect - Link Arkitekter, Oslo Project - Nannestad School, Norway Product - Designpanel Micro (AnutonePixel) 3

Green Danoline™ products contain no asbestos and they do not release any hazardous substances, either during machining and fitting or in the service period. A good working environment and indoor climate are thus guaranteed. Other advantages include no risks of allergenic nuisances while using thse products. Danoline™ is registered with voluntary labelling scheme Dansk Indeklima Maerkning or DIM (Danish Indoor Climate Labelling). DIM is the first labelling scheme to deal with construction materials in service phase. The purpose of indoor climate labelling is to improve the indoor climate in buildings. The areas covered by the indoor climate label are reviewed below. 1

Degasification Declaration with a time value in days, termed as the declared indoor climate value. The time value is determined on the basis of the time it takes the most slowly degased individual substance to drop below the substance’s smell and irritation threshold. Particulate discharge

Classification of the product based on the release of particles, determined from sedimentable dust consisting of particles (including fibres) in the first part of the product’s lifetime. According to the standard, Danoline’s products rank in the best class: Certificate no. DK 008, untreated products: The declared indoor climate value has been established as 10 days, and particulate discharge classified as low. Certificate no. DK-007, finished products: The declared indoor climate

value has been established as 10 days, and particulate discharge classified as low. Transport and storage One prerequisite for qualifying for Danish indoor climate labelling is that products are transported, stored and installed in accordance with special instructions. The labelling indicates that the article must be: •

positioned on a level base

•

stored indoors

•

protected from direct moisture

•

protected from impact and shock

•

opened without the use of tools

•

stored at humidities of less than 70% RH

•

stored at temperatures of less than 500 C

1 Architect - Arkkitehdit Gullichsen Vormala Ky Project - Technical Research Center of Finland (Mittatekniikka), Finland Product - Designpanel Micro (AnutonePixel) 2 Architect - White Arkitekter Project - Kunskapscentrum, Båstad, Sweden Product - Designpanel Micro (AnutonePixel)

Weight The deflection and load capacity of the ceiling systems are tested in accordance with the principles set by EN 13964 standard 2004. The humidity and temperature conditions present during the tests are described in Appendix F of the Standard. The load and deflection values in question can be found in the tables on relevant pages. Loads exceeding those rated should be transferred to the suspension system or to an independent overlying structure. In case of lightweight fixtures suspended directly from the ceiling elements, a special fixture plug, which expands on the back of the ceiling element, should be used. 1

The deflection is categorised under 3 classes: Class

Maximum deflection in mm

L/500 and not more than 4 mm

L/300

no limitations

L is the shortest distance between the furring battens. The deflection is tested under the below mentioned

conditions which are categorised under 4 classes: Class

Conditions

Building structures exposed to a maximum relative humidity of 70% and a maximum temperature of 25°C.

Building structures exposed to a maximum relative humidity of 90% and a maximum temperature of 30°C.

Building structures exposed to a relative humidity degree higher than 90%and to the risk of condensation.

Load is heavier than in the above classes.

The load capacity is stated as a combination of the above mentioned, the net weight and the built-in weight.

1 Architect - Sisustusarkkitehdit Gullstén-Inkinen Oy Project - Teknos Oy, Rajamäki, paint factory, Finland Product - Contur Globe (AnutoneSircle) 2 Architect - François Benedini Project - MEDEF, France Product - Belgravia Tangent (AnutoneSlot) 3 Architect - Semren Arkitektkontor Göteborg Project - Borås Højskole, Sweden Product - Designpanel Micro (AnutonePixel)

Deflection class

Humidity class

Type of load

No load (-)

Point load (N)

Linear load (N/m1)

–

Area load (N/m2 )

Moisture Gypsum board acts like a skin, capable of absorbing and releasing moisture. At low humidities, moisture is released, and at high humidities, moisture is absorbed. Gypsum products, therefore, play an active role in regulating and improving the indoor climate. All Danoline’s products are tested for resistance to moisture. Products tested with resistance up to 70%RH are designed for use under normal conditions, i.e. offices, institutions and similar premises. Products tested with resistance up to 90%RH are designed for use under more extreme conditions and can thus be used in kitchens, laboratories and other rooms with frequent and major changes in the humidity of the air. In the latter case, it is also recommended using special purpose, anti-corrosion treated suspension systems. 1

Testing deflection Plasterboards, which form the basic material of Danoline products, are tested for flexural strength according to the European Standard EN 520. Subsequently, Danoline products are tested for deflection and load-bearing capacity under certain temperature, humidity and load conditions,all in accordance with the principles set by the European standard EN 13964, 2004, Appendix F. The tests are carried out under humidity conditions classified as A, B, C or D, depending on the temperature and the relative humidity. We recommend that warehousing & storage conditions should not exceed 70 per cent RH and 50°C.

1 Architect - Arkitektfirmaet Hune & Elkjær Project - Private residence, Korsvang, Assens, Denmark Product - Tectopanel / Globe (AnutoneSircle) 2 Architect - Dissing og Weitling Project - Office building, Rådhusparken, Glostrup, Denmark Product - Designpanel Quadril (AnutoneSquare)

Reflectance 1

The plaster board surface is ideal for applying various types of paints and laminates. The nature of the surface can vary from high-gloss to matt surfacing. For measuring luminous reflectance, a standard measuring method, DIN 5036, Part 3, is used. However, the subjective perception of luminous reflectance can vary from the measured values, since the gloss and structure of the surface also influence one’s experience of reflectance. Gloss has a bearing on reflections at very oblique incidences of light. Thus great mattness gives very little reflection. The structure also affects reflection. Perforated boards reflect light back in many directions and thus create a great scattering of light. Both are instrumental in giving gypsum products minimum reflection and take excellent advantage of reflected light, so rooms in which gypsum ceilings have been used are perceived as being light and pleasant.

Painted Danoline™ ceilings are supplied as standard with a white gloss 5 surface (NCS 0700). The painted surface has a fine, matt texture, providing great light dispersion to ensure optimal exploitation of working light without troublesome reflections. In functional terms, the surface can beneficially be used in rooms where work is done at computer monitors. Gloss 5 paint and dark colours create far fewer reflections but should only be used in rooms where there is adequate lighting, e.g. in the form of large window surfaces. Gloss 15 surfaces should only be used as a special finish, since less light reflection is achieved together with a greater mirror reflection. In functional terms, highgloss surfaces have the advantage of being easier to clean, and dirt is less prone to cling to the surface. Product

Luminous reflectance Measurements of reflection have been carried out in accordance with DIN 5036, Part3, DLO measuring instruction B15-1.

Surface

Reflective

Quadril

AnutoneSquare

gloss 5

75.1%

Micro

AnutonePixel

gloss 5

72.1%

Globe

AnutoneSircle

gloss 5

72.8%

Globe

AnutoneSircle

gloss 15

71.5%

Regula

AnutoneSlate

gloss 5

82.6%

Regula

AnutoneSlate

gloss 15

80.8%

Regula

AnutoneSlate

white faced

79.2%

1 Architect - Lundesgaard & Christiansen, Porsgrunn Project - Vestsida Kindergarten, Norway Product - Designpanel Micro (AnutonePixel) 2 Architect - Arkkitehtitoimisto Hyvämäki Karhunen Parkkinen Project - Hotel Scandic Simonkenttä, Finland Product - Contur Micro (AnutonePixel) 3 Architect - Aukett Ltd, SW11 Project - SAS Radisson, England Product - Designpanel Micro (AnutonePixel)

MISCELLANY

Architect - White Arkitekter Project - Halmstads Fastighetsbolag, Sweden Product - Designpanel/Markant Micro (AnutonePixel)

MAINTENANCE Suspended Ceilings Valid for Contur, Belgravia and Markant Materials

Maintenance

Tiles

Factory painted perforated and unperforated ceiling tiles and panels are painted with water based acrylic paint. Standard White no.7380-3350 (as NCS 0700) gloss 5.

Framework

Galvanised metal profiles, the exposed parts are factory painted as CMC No.001 Global White (NCS 0902-G48), wall angle for Corridor F30 as RAL 9010.

Dust

Vacuum cleaning with a soft brush nozzle.

Dirt

Painted surfaces should be wiped off with a damp cloth, using a mild detergent.

Stains and damages

Painted surfaces should be wiped off and if necessary repainted using a paint roller or a brush, but roller is recommended. Spray painting is not recommended on perforated products, as the spray paint could spill to the acoustic felt backing altering the acoustic properties. Slight damages and scratches on the surface can be repaired using filler and finishing with sandpaper. The painted ceiling products can be repainted using AnutoneSnazz repair paint colour # 7417-3350 (as NCS 0700).

Wall and Ceiling Linings Valid for Danopanel and Designpanels Materials

Panels

Factory painted perforated and unperforated panels are painted with water based acrylic paint. Standard White no.7380-350 (as NCS 0700) gloss 5.

Maintenance

Dust

Vacuum cleaning with a soft brush nozzle.

Dirt

Painted surfaces should be wiped off with a damp cloth, using a mild detergent.

Stains and damages

Architect - Lundesgaard & Christiansen, Porsgrunn Project - Vestsida Kindergarten, Norway Product - Designpanel Micro (AnutonePixel)

DESIGN OPTIONS With an unbelievably broad range of modular ceilings, built spaces can practically sport a designer look, with a mix n match of different options for ceiling surfaces. For instance, lobbies, office functional areas and conference halls can have textures and plasters, executive meeting rooms can be rendered fine decor with vinyls. Corridors, cafeteria etc. can be made durable with metals. And, high-profile spaces like chairmanâ&#x20AC;&#x2122;s cabin or executive boardrooms can be imparted premium impact with foams and fabrics. More, the ceiling can be treated with any of the wonderful ranges, yet keep the plenum exposed, making the entire setting a true designer act. In essence, a given built space can sport different looks with - exposed plenum, large format, combinations (multi-product), layers (multi-levels), shapes n sizes (hexagon, octagon etc), curves, perforated & unperforated, accented AnutoneSkelet. The possibilities are limited only by oneâ&#x20AC;&#x2122;s imagination. Here are some design options ...

Combinations

Carnival Floats

Plain, and monotonously single-product ceilings turn into fascinatingly appealing surfaces with combinations of different surface finishes. Combining multiple products not only adds to the visual appeal but also contributes to better functionality - a combi of AnutoneSnazz Danoline and metal tiles not only does hard service but helps diffuse light elegantly.

Carnival floats in regular squares or rectangles, circle and oval shapes can be customised with AnutoneSnazz Danoline tiles and AnutoneSkelet Infinity suspension systems, generating a strong aesthete statement for the designer and the client.

Perf & Unperf

Colour AnutoneSkelet

Architectural appeal and sound conditioning blended beautifully with plain and perforated panels. AnutoneSnazzâ&#x20AC;&#x2122;s Regula and 4 perf patterns can do duty. Aesthetics maximised and acoustics optimised delivering a unique value proposition to stakeholders.

Break away from the limitation of white frameworks. Now, even the framework can match the vividity of coloured tiles to weave in a different aesthetic impact. This applies for the Markant and Belgravia series.

For wall panelling, Anutone and Danogips offer a very unique value proposition. Apart from using Designpanel and Danopanel for wall lining, special applications can include Designpanel Micro - AnutonePixel used as an acoustical substrate for insitu adhering of thin wallpapers, glassfibre textiles and vinyls. This has been successfully done for the banquet halls at Velankini Hotel, Bengaluru where the client and designer were looking for a suitable substrate for their chosen thin vinyl paper.

NEW PERFORATION - Tangent AnutoneSlot Design Freedom

Sound absorption + sound diffusion = good sound experience

DEFLECTION GFR plasterboards which form the basic material of Tangent AnutoneSlot are tested for flexural strength according to the European Standard EN 520. Subsequently Tangent AnutoneSlot are tested for deflection and load bearing capacity in accordance with the European Standard EN 13964. Tangent AnutoneSlot are classified as Class 1/A/no load*. *Deflection Class 1 (L/500 and not more than 4 mm); Condition Class A (70%RH,250); Load Capacity: No Load

FIRE CLASSIFICATION Tangent AnutoneSlot are tested for reaction to fire in accordance with EN 14190. They are classified as material class: A2s1,d0 Designpanel with Tangent AnutoneSlot are tested and approved in accordance with 13501-2:2007 as covering class: K1 10, A2-s1, d0 and K2 10, A2-s1,d0

LIGHT REFLECTANCE Tangent AnutoneSlot are tested for light reflectance according to DIN 5036, Part3, DLO measuring instruction B15-1. The total reflectance of Tangent AnutoneSlot (standard white) is 70,9%.

SOLUTION POSSIBILITIES Tangent AnutoneSlot is available for a number of ceiling and wall solutions. CLADDINGS, NON DEMOUNTABLE CEILINGS

SUSPENDED, DEMOUNTABLE CEILINGS

Designpanel (edge A1/A3)

Contur (edge D)

Belgravia (edge E)

Markant (edge E)

Suitable for large surface ceiling and wall areas to give monolitic look.

Monolithic solution for suspended ceilings, ideal for combination with wall claddings and for low installation height.

Classic,robust ceiling, exceptionally easy to install and demount.

Easily adaptable to the shape of the room,offering a distinct look with strong shading.

ACOUSTICS

Designpanel, T4L4 • No mineral wool • 50 mm Danopor • 50 mm mineral wool

αw: 0.75, NRC: 0.70 αw: 0.75, NRC: 0.75 αw: 0.80, NRC: 0.80

• No mineral wool • 50 mm Danopor • 50 mm mineral wool

aw: 0.75 , NRC: 0.70 aw: 0.70 , NRC: 0.75 aw: 0.75 , NRC: 0.75

Tiles, T1

Ceiling tiles: 600 x 600 x 12.5, T1 Mounting depth: 200 mm Perforation: 21.3 %

Ceiling tiles: 600 x 600 x 12.5, T1 Mounting depth: 400 mm Perforation: 21.3 %

αw: 0.60 ,NRC:0.65 • 50 mm mineral wool Panels:1200 x 2400 x 12.5, T4L4 Mounting depth: 85 mm Perforation: 13.3 %

αw: 0.55 ,NRC:0.55 • No mineral wool Panels: 1200 x 2400 x 12.5, T4L4 Mounting depth: 200 mm Perforation: 13.3 %

αw: 0.75 ,NRC:0.75 • 50 mm mineral wool Panels: 600 x 600 x 12.5, T1 Mounting depth: 85 mm Perforation: 21.3 %

αw: 0.55,NRC: 0.55 • 200 mm mineral wool Panels:1200 x 2400 x 12.5, T4L4 Mounting depth: 235 mm, with vapour barrier Perforation: 13.3 %

APPLICATIONS SCHOOLS

Vaxjo, Sweden

Child care centre, Rodovre, Denmark

Training Centre, Halbaek, Denmark

Frederiksberg, Denmark

Oskarsstrom, Sweden

Varberg, Sweden

Play School

Kunskapens Hus education centre, Bastad, Sweden

Monstersds, Sweden

Vaxjo, Sweden

Varberg, Sweden

Monstersds, Sweden

HOSPITALS

Thisted, Denmark

Gothenburg, Sweden

Roskilde, Denmark

OFFICES

Atea, Vaxjo, Sweden

Executive Office

KV Ekenas Kista, Sweden

Vekso, Denmark

KV Jericho, Stockholm, Sweden

AUDITORIUM

Seminarium (College of Education), Aalborg, Denmark

Military Academy, Stockholm, Sweden

OBH Group Office building, Denmark

S U M M A RY TECHNICAL SUMMARY Sl # Description

AnutoneSnazz Danoline Series Designpanel Danopanel Contur Belgravia Markant

Thickness (mm)

Size (mm)

Core

Nominal Density ( Kg / m3 )

Weight (Kgs / m2 )

Edge

NRC

Fire

Moisture Resistance (%)

Light Reflectance (%)

Warranty

Installation

Colour

Maintenance

Slate Curve

12.5 1200 x 2400

600 x 600

585 x 585

900 x 2700

Slate Strong

Slate Board

12.5

1200 x 2500

1200 x 1800

Gypsum plaster

Taper

800

750

800

4.5

Butt / Fine Bevel

Steppe / Fine Bevel

Square

Taper

Upto 0.75

NA Class A2 S1 / d0 RH 70

80 5 Years

AnutoneStrut Concealed

Unpainted

T24 (Conce aled)

T15 / U15 T15 (Semi (Semi Concealed) Concealed)

AnutoneStrut Concealed

Painted White

Unpainted

Vacuum or wet wipe with damp cloth

BILL OF QUANTITIES (BoQ) - 100M2 Sl# Description

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Units

AnutoneSkelet T15 W Angle WA15W30 lm AnutoneSkelet T15 Main T MT15W36 lm AnutoneSkelet T15 Cross T CT15W12 lm AnutoneSkelet T15 Cross T CT15W06 lm AnutoneSkelet U15 W Angle WA15W30 lm AnutoneSkelet U15 Main U MU15W36 lm AnutoneSkelet U15 Cross U CU15W12 lm AnutoneSkelet U15 Cross U CU15W06 lm AnutoneSkelet T24 W Angle WA24W30 lm AnutoneSkelet T24 Main T MT24W36 lm AnutoneStrut MC45 lm AnutoneStrut CC25 lm Tiles m2 Anchor Bolt, Soffit Cleat, Butterfly clip, LS Suspension wire/Rod, Spacer Bar Labour hrs

Plasters Designpanel

Danopanel

Contur

Belgravia

C-System

T24

U15

T15

C-System

100 350 100 LS

340 170 100 LS

40 100.8 163.2 81.6 100 LS

100 350 100 LS

2725

2600

2075

2350

1125

Estimated Installed Cost / m 2 Rs 2175 Considered Area - 100m 2 (Length 10m & Width 10m)

Abbreviations: lm - Linear meter, m2 - Square meter, LS - LumpSum, hrs - Hours * The above indicated values are very approximate and dependent on several variables. They are for guidance only and subject to change without prior notice.

Markant AnutoneSlate

WALL / CEILING LININGS Product Name

Designpanel

Danopanel

SUSPENDED CEILINGS Contur

Belgravia

Markant

Edge

Edge A1/A3

Edge B

Edge D

Edge E

Surface

Untreated

Painted, gloss5

Painted, gloss 5

Suspension system

CC22

T24

T15 / U15

T15

Fire classifications EN

EN 14190:

A2-s1, d0 (C1)

A2s1, d0 (C1)

B-s1, d0 (C1)

B-s1,d0 (C1)

N: K1-A, In 1

Full-perforated: Part and non-perforated:

DEFLECTION AND LOAD BEARING CAPACITY (EN 13964: Note below)

900 x 2700 mm Class 2 / A / No load 600/1200 x 2400 Class 2 /B /30N

Class 1 / A / No load Class 2 / B / No load Class 3 / A / 30N

Class 2 / A / No load

Class 1 / A / No load Class 2 / B / No load Class 2 / A / 30N

Class 1 / A / No load Class 2 / B / No load Class 2 /A /30N

Size

1200 x 2400 x 12.5 mm

600 x 600 x 12.5 mm

Note: The Deflection and Load Bearing Capacity Test is carried out in accordance with the principles of EN13964:2004. The given values apply to the standard format 600 x 600mm, unless otherwise stated,

Perforations There are 4 main types of perforations.The width of the tile’s perimeter border varies depending on the specific type on pattern and ceiling system. The information on product data is given on the relevant pages. Globe AnutoneSircle

Quadril AnutoneSquare

Micro AnutonePixel

Tangent AnutoneSlot

consists of 6 mm circular holes at 15 mm centres.

consists of 12 x 12 mm square holes at 30 mm centres.

consists of 3 x 3 mm square holes at 8.33 mm centres.

consists of 4 x 14 mm oval holes at 10/20 mm centres.

1 Architect - Brizac Gonzales Arkitekter, England og Frenning & Sjögren Arkitekter, Göteborg Project - Världskulturmusseet, Sweden Product - Designpanel Micro (AnutonePixel) 2 Architect - Arkkitehtitoimisto Larkas & Laine Oy Project - Office building Outokumpu, Finland Product - Belgravia / Danoline Tiles Metallic Micro/Regula (AnutonePixel/AnutoneSlate)

India References Office Synergy Properties Synopsys MEPZ

Bengaluru Bengaluru Chennai

Cinema Era E-Zone

Meerut

Education British Library Amity School

Chennai Noida

Healthcare Mandke Foundation

Mumbai

Hotel Velankani Hotel

Bengaluru

Home Theatre Mr. Jain

Chennai

Synopsys, Bengaluru

Architect - White Arkitekter Project - Kunskapscentrum, Båstad, Sweden Product - Belgravia Regula (AnutoneSlate)

ANUTONE INTERIORS (a division of Anutone Acoustics Limited)

www.anutone.com • Bahrain • Dubai • Mumbai

• Budapest • Chennai • Jeddah • Kolkata • Muscat • Nairobi

ISO 9001:2008 CERTIFIED

ISO 14001:2004 CERTIFIED

Anutone is member of • Dammam • Doha • Kuwait • Manila • New Delhi • Riyadh

Anutone® is a registered trademark of Anutone Acoustics Limited. Specs are subject to change due to continuous improvement programmes at Anutone ®. Contents under copyright registration. No part of this brochure may be reproduced, stored in a retrieval system, scanned or transmitted in any form or by any means electronic, photocopying, recording or otherwise, without the prior written permission of Anutone®.

Document # 909010-500

231, 7th Cross, Indiranagar 1st Stage, Bengaluru 560 038, India Phone +9180 2520 3114 Fax +9180 2520 3115 info@anutone.com