spiders for glass facades
DIVIDER INSERT HERE: Spider fittings
spiders for glass facades
GLASS SPIDERS
structural dynamicS - glass spiders Structural Dynamics is a world leader in designing, engineering and supplying glass facade systems. Structural Dynamics engineered and manufactured the truss and spider system for the glass façade of the New International Bangkok Airport. This is one of the world’s largest glass façades at around 1km long and 40m high.
Copyright © 2011 Strudyna
WHAT ANZOR STOCKS Spiders – we stock Structural Dynamics Glass `Spyders’ designed for small-to-medium sized projects. Rod and wire tensioning systems – we also stock rod bracing and wire tensioning components which can be incorporated to support a glass façade structure. For more information, see `Tension Rod’ (p.77) and `Wire Rigging’ (p.93) sections. Spiders, rod & wire rigging systems for large projects - available on request and made to order.
WHY SPECIFY STRUCTURAL DYNAMICS SPYDERS? •
High Quality - manufactured by a leader in stainless steel components for glass façade structures. Structural Dynamics have proven themselves in designing and manufacturing the truss and spider systems for many major projects. We are supplying an increasing number of New Zealand projects.
•
Fully strength tested with performance data available.
•
High corrosion resistance – they are made from 316 Stainless Steel, which is then passivated for additional corrosion resistance.
•
Timely delivery - stocks are held in Auckland, and additional stock can be sought with reliable delivery times.
•
Competitively priced.
Design notice: The information provided herein are to be used as design recommendations only. Structural Dynamics and its affiliate agents (Anzor) does not assume any responsibility for any injury and/or damage to property or person as a matter of negligence or otherwise, or from any use or operation of any methods, instructions, products or ideas contained in these drawings.
Online catalogue: www.anzor.co.nz/arch
119
4 LEG SPIDER
4 leg - YB41 SPIDER
EX-STOCK SUBJEC T TO PR IOR SALE
Product Code: ASDSPYB41CSS200
Performance data 4 Leg 200 x 200mm Spider - with M14 standard Rotule
200
Free Hole Connection
Spider hole configuration
Slotted Hole Connection
The 4-leg spider has 2 `free’ holes, and 2 slotted holes.
200 M14
The two slotted holes on the bottom support the dead load (self weight from the glass below), positive wind load and negative wind load. The two free holes on the top are attached to the 2 pieces of glass that are above the spider, supporting positive and negative wind loads.
Fasteners to connect spiders to rods P2
RD Eyenut Connector
P1 P3
P4
P1: Allowable negative wind pressure
2300N
P2: Allowable wind pressure
2500N
P3: Spider allowable dead load
1300N
P4: Rotule allowable dead load
1262N
NOTE: the analytic load is for an individual leg of spider, each leg receives the equivalent load. Yield Stress = 241 Mpa. Allowable Stress = 0.7 x 241=168.7 MPa.
RD Eyenut CNT Bolt
Sold separately - available on request
120
PLEASE NOTE: Rotules are a separate component. See p.124 for more details.
Online catalogue: www.anzor.co.nz/spider www.anzor.co.nz/arch fittings Information used exclusively under permission of Strudyna Co. Ltd
2 LEG SPIDER - 45° & STRAIGHT
EX-STOCK SUBJEC T TO PR IOR SALE
2-LEG - YB21 45 DEGREE SPIDER Product Code: ASDSPYB21CCN200
100
200
100
Ø26
100
EX-STOCK SUBJEC T TO PR IOR SALE
2-LEG - YB21 STRAIGHT SPIDER Product Code: ASDSPYB21HVC200
100
200
Ø26
Online catalogue: www.anzor.co.nz/spider-fittings www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd
121
2 LEG SPIDER FOR GLASS FINS
2 LEG - YA24 - LH & RH SPIDER FOR GLASS FINS Product Code: ASDSPYA24NNS200 (LH), ASDSPYA24CSN200 (RH - slotted hole) EX-STOCK SUBJEC T TO PR IOR SALE
10
REQUIRES:
200
2 x M14 x 90 Spyder Double Lock Bolts Product Code: ASDSPDLBM14 X 9
Glass Fin
90
14.5
26.5
REQUIRES: 2 x M14 x 90 Spyder Double Lock Bolts.
200
Product code: ASDSPDLBM14 X 9
1 x 14mm x 170 PWP1 Spyder Washer Plate. Product code: ASDSPYPWP1L170
DID YOU KNOW Spiders can also be clamped either side of a steel cleat that is welded to the roof support structure.
90
122
14.5
26.5
Online catalogue: www.anzor.co.nz/spider www.anzor.co.nz/arch fittings Information used exclusively under permission of Strudyna Co. Ltd
1 LEG SPIDER FOR GLASS FINS
1 LEG - YA14 SPIder for glass fins Product Code: ASDSPYA1400HS90
EX-STOCK SUBJEC T TO PR IOR SALE
REQUIRES: 2 x M14 x 90 Spyder Double Lock Bolts
14.5
Product Code: ASDSPDLBM14 X 9
26
Glass Fin
REQUIRES: 2 x M14 x 90 Spyder Double Lock Bolts.
14.5
Product code: ASDSPDLBM14 X 9
1 x 14mm x 140 PWP1 Spyder Washer Plate. Product code: ASDSPYPWP1L170
26
Online catalogue: www.anzor.co.nz/spider-fittings www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd
123
ROTULE & ROTULE TOOLS OCK E X-ST C T E SUB J IOR TO P R SA L E
ROTULE
D
C
Glass Thickness
Glass Hole Ø
Product code
AØ (mm)
BØ (mm)
C (mm)
M12
10-15mm
33.5mm
ASDSPR126050
32
50
M14
12-16mm
37.5mm
ASDSPR147662
36
62
M16
16-21mm
43.5mm
ASDSPR168570
42
70
Size
OCK E X-ST C T E SUB J IOR TO P R SA L E
B
A
F E
D (mm)
E (mm)
FØ (mm)
28
18
25
22
32
25
28
28
37
29
30
28
ROTULE COUNTERSUNK
B
A
F D
E
C
Size
Glass Thickness
Glass Hole Ø
Product code
AØ (mm)
BØ (mm)
C (mm)
D (mm)
E (mm)
FØ (mm)
M14
12-16mm
37.5mm
ASDSPR147662
36
47
29
26
28
28
ROTULE TOOLS All four tools are required for proper installation of rotule sizes M12 - M16. OCK E X-ST C T E SUB J IOR TO P R SA L E
RTT4
RTT3
RT T1
RT T2
RT T3
RT T4
RTT1 The insert secures the ball joint of the centre shaft.
RTT2
124
A different size is required for each of M12, M14 & M16
Online catalogue: www.anzor.co.nz/spider www.anzor.co.nz/arch fittings Information used exclusively under permission of Strudyna Co. Ltd