tension rod systems
tension rod systems
DIVIDER INSERT HERE:
Tension Rod Systems
TENSION ROD SYSTEMS
TENSION ROD SYSTEMS rod dynamic `HIDDEN THREAD’ - STAINLESS Steel
Page 78
This is our standard stainless steel Tension Rod System.
coupling plates - STAINLESS Steel
Page 83
P2H Adjuster & ROD - STAINLESS Steel
Page 85
SRS-560 high tensile adjuster & high tensile rod - Stainless steel
Page 87
fork + ROD tension system - galvaniZed
Page 89
Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd
79
ROD DYNAMIC `HIDDEN THREADS’
Subway - Lunn Ave, Auckland Rod Bracing Canopy Contractor: J & R Slecht Ltd
Sovereign House - Smales Farm, Auckland Rod Bracing for Sun Screen Contractor: Thermosash Commercial Ltd BNZ Tower - Wellington Internal Rod Supports for Bridges Contractor: Thermosash Commercial Ltd
80
New Lynn Railway Station - Auckland Internal Structure Support Contractor: Grayson Engineering Ltd
Online catalogue: www.anzor.co.nz/tension-rod
ROD DYNAMIC `HIDDEN THREADS’
EX-STOCK SUBJECT TO PRIOR SALE
ROD DYNAMIC `HIDDEN THREAD’ stainless steel tie rods RH
LH
Adjust by turning the rod only.
ADJUSTABLE FORK - (RH)
SPANNER FLATS
ADJUSTABLE FORK (LH)
RH ROD JOINER
LH
ADJUSTABLE EYE (RH)
Adjust by turning the extended tension rod and joiner as one single unit.
ADJUSTABLE EYE (LH)
Locking nut covers threads
FEATURES & BENEFITS • Attractive look as the threads are hidden by the locking nut. • Exposed threads can commonly trap corrosive agents (e.g. salt) and therefore tea-stain more easily. By covering the threads it removes this risk and enhances the long-term appearance.
• Fork and Eye terminals are made from 316 Stainless Steel which is then passivated for enhanced corrosion resistance. These are made by the highly reputable manufacturer of structural stainless steel components `Structural Dynamics’.
• • • •
Fork and Eye terminals each have a laser engraved code for traceability from raw material. The Tie Rods are 316 Stainless Steel. UNF threads allow for more precise adjustment. Fully tested with Tensile & Yield loads available.
WHY SPECIFY? • We have excellent stock levels of all fittings in New Zealand, so our delivery is quick. • Rod length is customised to the job - machined locally to order with a short delivery time. • Competitively priced. • We are proven in New Zealand, and are the preferred supplier to many structural steel companies, having supplied many projects nationwide.
Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd
81
rod dynamic `HIDDEN THREADS’
ADJUSTABLE FORKS
- left (S912L) & Right hand (S912R) L
B
A
Product Code: ASDS912
TY S M ALL Q R TO O R D E
appr ox D eliver y 2- 3 wee ks
y large qt R E D R O TO
appr ox D eliver y 2 months
D
M
EX-STOCK SUBJECT TO PRIOR SALE
M
Size M UNF
A
B
ØD
L
(mm)
(mm)
(mm)
(mm)
Adjustment (+/-)
Yield Load* (kN)
Tensile Load (kN)
1/4” UNF
7
11
6.4
68.5
15mm
7.0
14.6
5/16” UNF
8.5
13.2
7.9
80
16mm
11.6
23.3
3/8” UNF
10
18
9.5
97
19mm
12.9
30.6
1/2” UNF
14
24
12.7
137
30mm
24.6
58.2
5/8” UNF
18
30
16
170
35mm
33.8
85.0
3/4” UNF
22
38
19
212
45mm
49.4
124.1
7/8” UNF
24
45
22
244
50mm
67.2
168.9
1” UNF
26
50
25.5
282
60mm
87.7
220.4
1-1/4” UNF
32
64
31.8
330
65mm
141.9
356.4
Size M Metric
A
B
ØD
L
(mm)
(mm)
(mm)
(mm)
Adjustment (+/-)
Yield Load* (kN)
Tensile Load (kN)
M27x3.0
28
50
27
264.9
54mm
120.0
236.0
M30x3.5
30
55
30
294.2
60mm
147.0
288.0
M33x3.5
32
60
33
321.6
66mm
181.0
357.0
M36x4.0
34
65
36
350
72mm
214.0
420.0
M39x4.0
36
70
39
378
78mm
255.0
502.0
M42x4.5
39
75
42
408
84mm
293.0
577.0
M45x4.5
42
78
45
432.7
90mm
342.0
672.0
M48x5.0
45
82
48
460
96mm
385.0
758.0
M52x5.0
49
88
52
498.1
104mm
460.0
905.0
M56x5.5
52
92
56
530.9
112mm
531.0
1,045.0
*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
Loctite 243
ROD LENGTHS Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
Threads must be lubricated with NICKEL ANTI SEIZE TO AVOID GALLING.
82
Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd
ROD DYNAMIC `HIDDEN THREADS’
ADJUSTABLE EYES
EX-STOCK SUBJECT TO PRIOR SALE
- left (S911L) & Right hand (S911R) L
B
A
Product Code: ASDS911
Size
D
A
B
ØD
L
(mm)
(mm)
(mm)
(mm)
Adjustment (+/-)
Yield Load* (kN)
Tensile Load (kN)
1/4” UNF
6
11
6.7
68.5
15mm
7.0
14.6
5/16” UNF
8
13.2
8.3
80
16mm
11.6
23.3
3/8” UNF
9
18
9.8
97
19mm
12.9
30.6
1/2” UNF
12
24
13
137
30mm
24.6
58.2
5/8” UNF
16
30
16.2
170
35mm
33.8
85.0
3/4” UNF
20
38
19.5
212
45mm
49.4
124.1
7/8” UNF
22
45
22.5
244
50mm
67.2
168.9
1” UNF
24
53
25.7
282
60mm
87.7
220.4
1-1/4” UNF
30
66
32
330
65mm
141.9
356.4
*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
For installation guide and technical specifications please contact us or visit www.anzor.co.nz/arch/tension-rod Also Available
curtain RDS curtain wall joiner wallwith with joiner movable with movable articulation articulation RDSRDS curtain wall joiner movable articulation
ROD LENGTHS Rod made to order up to approx. 6m. Please supply the pin-to-pin measurement.
RDS curtain wall with fixed articulation RDS curtain RDS curtain wall joiner walljoiner with joiner fixed with articulation fixed articulation
Threads must be lubricated with NICKEL ANTI SEIZE TO AVOID GALLING.
Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd
83
ROD DYNAMIC `HIDDEN THREADS’
ROD JOINER
EX- STOCK SUB JEC T TO PRIOR SALE
to connect rods for lengths beyond 6 metres
M
L
Size (M)
L (mm)
1/4” UNF
24
5/16” UNF
32
3/8” UNF
38
1/2” UNF
50
5/8” UNF
60
3/4” UNF
72
7/8” UNF
83
1” UNF
90
1-1/4” UNF
112
PIN, WASHER & SCREW DIMENIONS Size (M)
L
Ø6.4
14mm
5/16” UNF
Ø7.9
17.5mm
3/8” UNF
Ø9.5
19.5mm
1/2” UNF
Ø12.7
26.4mm
5/8” UNF
Ø16
34.5mm
Loctite 243
3/4” UNF
Ø19
41.5mm
We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
7/8” UNF
Ø22
46.5mm
1” UNF
Ø25.5
54.5mm
1-1/4” UNF
Ø31.8
65mm
D
1/4” UNF
L
ISOLATING WASHER
EX- STOCK SUB JEC T TO PRIOR SALE
To be used to separate dissimilar metals such as when attaching a stainless steel adjustable fork to a mild steel galvanized bracket. Thereby avoiding galvanic corrosion between dissimilar metals. Size
T2
D1
D2
D3
T1
84
D
ØD1 (mm)
ØD2 (mm)
ØD3 (mm)
ØT1 (mm)
ØT2 (mm)
1/4”
9.0
7.0
14
4.5
6.5
5/16”
10.5
8.5
16
6.0
8.0
3/8”
12.0
10.0
18
7.5
9.5
1/2”
15.5
13.5
25
11.5
13.5
5/8”
20.5
16.5
32
15.0
17.0
3/4”
23.5
19.5
36
19.0
21.0
7/8”
27.0
23.0
45
19.0
23.0
1”
30.5
26.5
50
21.0
25.0
1.1/4”
37.0
33.0
60
27.0
31.0
Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd
COUPLING PLATES
ROD DYNAMIC TIE BACK PLATES - 316 STAINLESS STEEL Always install rods and brackets in line.
SCA1 LE AVAIL AB R TO O R D E
appr ox Deliver y 2 wee ks
Size
SCB1 - Bolt Anchor
Designed for J Bolts directly onto steel beam. EX-STOCK SUB JEC T TO PRIO R SALE
H
L
(mm)
(mm)
L1
T
(mm)
(mm)
1/4”
9.5
18
20-60
11
5
5/16”
11.0
21
25-75
13
6
3/8”
12.5
24
30-70
16
8
1/2”
16.5
33
40-100
22
10
5/8”
21.0
45
50-110
28
14
3/4”
24.0
45
60-120
35
18
7/8”
28.0
70
60-140
38
19
Welded Application
Welding coupling plates. SCA1 are designed to be cut and welded on site.
ØD
(mm)
1”
31.5
90
75-155
45
20
1-1/4”
38.0
105
85-185
55
25
SCD1 - Chemical Bolt Anchor Designed for chemical anchors directly onto concrete. EX-STOCK SUB JEC T TO PRIO R SALE
SCC1- Chemical Bolt Anchor Designed for chemical anchors directly onto cement. EX-STOCK SUB JEC T TO PRIO R SALE
Product code: ASDCPB1
Product code: ASDCPD1
Angles available ex-stock: 60° Available to order: 45,50,55,65,70,75,80,85,90°
Angles available ex-stock: 90° Available to order: 30,40,45,50,55,60,65,70,75
Product code: ASDCPC1
Angles available ex-stock: 45°
NB: Breaking Loads for SCB1, SCD1 & SCC1 are indicative of coupling’s plate tensile performance against rod assemblies, and not the anchoring strength of bolts against wall/floor.
For full dimensions, please contact us or visit
www.anzor.co.nz/arch
Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch Information used exclusively under permission of Strudyna Co. Ltd
85
COUPLING PLATES
COUPLING PLATES - 316 STAINLESS STEEL
appr ox D eliver y 2 wee ks
65
6.7
6
5/16”
80
8.2
6
3/8”
90
9.8
8
115
13.3
5/8”
140
16.5
3/4”
170
20.0
19
7/8”
190
23.0
22
1”
220
26.0
1-1/4”
260
33.0
D1
D1
D1
D
D1
D D1
D
°
D1
D
85
D
D
°
80
° 80°
°
70
65
°
°
85
°
°
85
80
D
D
D1
D
12 0°
D1 0°
D1
T
12
0°
12
T
120°
T
120°
T
Copyright © 2011 Strudyna
86
T
120°
Angles available: 120° Size
D
D1
D D1
D1
D1 D1 D
D1
°
80
SCG1
120°120°
D
D1
D1
D D
D1
D D1
85°
75
D
D
0°
50
°
60
12
0° 12
°
70
45°
°
D
D1
D °
70 °
°
75
75
°
°
°
75
D
°
70
D1
D D1
70
D
D
°
°
65
65
65
D D1
D1
D1
D1 D D1
°
65
°
80°
75°
60
60
55
40°
°
60
°
D
D D1
D1 D
D1
D D1
70°
65°
°
°
55
55
50°
45°
40°
°
55
50°
D1
D1
D
D1
D
D
50° 50°
45°
40°
D
60°
D1
D1
D
55°
45° 45°
40° 40°
T
30
D D1
90 °
22
D1
D1
12 16
D
D1
D1
D
1/2”
D D1
D
D D1
D
D
D1
1/4”
D D1
°
90
° 90
D1
D
D1
D
50°
D1
D1
(mm)
D
D
D
90 ° 90 ° D1
D D1
45°
D
40°
T
(mm)
T
Angles available: 40,45,50,55,60,65,70,75,80,85,90 D1
T
T
(mm)
D
D1 D1
D D1
T
ØD1
ØD
Size
90°
D1
SCF1
For Cross Bracing
D
LE AVAIL AB R TO O R D E
ØD
(mm)
ØD1
(mm)
T
(mm)
1/4”
65
6.7
6
5/16”
80
8.2
6
3/8”
90
9.8
8
1/2”
115
13.3
12
5/8”
140
16.5
16
3/4”
170
20.0
19
7/8”
190
23.0
22
1”
220
26.0
22
1-1/4”
260
33.0
30
Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd
°
85
P2 H ADJUSTER
P2H ADJUSTER - ARCHITECTURALLY DESIGNED Stainless steel TERMINALS FOR TIE RODS LE AVAIL AB R E D R O TO x
RH
appro D eliver y 4 months
Adjust by turning the “In-Socket” only.
P2H - Fork Lock Nut for In-Socket
A `HIGH END’ ARCHITECTURALLY DESIGNED ROD ADJUSTER. •
A high quality tensioning unit for rod (and cable – see p.101).
•
Designed for performance and also aesthetic appeal.
•
Due to its unique internal adjustment system, it can be adjusted individually by turning just one adjuster end, without having to turn the entire rod.
•
The double locking nut system offers good security to counter external dynamic and resonance forces.
•
Threads are hidden for enhanced aesthetic appeal.
PIN Lock Nut for Ex-socket
P2H Adjuster Technical Features •
Rod diameter: Metric M16 – M56.
•
Made from passivated 316 Stainless Steel for enhanced corrosion resistance.
•
Finish: Matt
•
Installation - special P2H tools required.
Threads must be lubricated with NICKEL ANTI SEIZE TO PREVENT GALLING
Online catalogue: www.anzor.co.nz/tension-rod Copyright © 2011 Strudyna
Information used exclusively under permission of Strudyna Co. Ltd
87
P 2 H ADJUSTER
P2H ADJUSTER - performance data P2H (Fork)
P2H (Fork)
ØD A
Pin-to-Pin Middle adjustment
Rod Size (Ø)
A (mm)
ØD (mm)
Adjustment +/-
Yield Load* (kN)
Tensile Load (kN)
M16
18
16
40mm
40
80
M20
20
20
40mm
67
132
M22
20
22
40mm
79
163
M24
21
24
56mm
100
197
M27
24
27
56mm
126
254
M33
30
33
60mm
199
391
M42
34
42
64mm
314
620
M45
40
45
64mm
365
718
M52
40
52
70mm
485
978
M56
48
56
80mm
514
1,143
*Standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
For installation guide, tools and technical specifications please contact one of our architectural product managers or visit www.anzor.co.nz/arch/p2h P2H Precautions
Loctite 243 We recommend applying Loctite 243 to the pin, washer & screw set for permanent fixture.
•
Always select the correct rod system based on load requirements.
•
Do not overload the rod above its designed safe working load.
•
Always use the P2H Adjuster in line with its anchoring point.
•
Never use the P2H adjuster for lifting purposes.
Threads must be lubricated with NICKEL ANTI SEIZE To PREVENT GALLING
88
Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd
SRS - HIGH TENSILE STAINLESS ROD
LE AVAIL AB R E D TO O R
SRS-560HTR - HIGH TENSILE Stainless steel ROD SYSTEM
approx D eliver y 4 months
RH
LH Adjust by turning the rod only.
FEATURES SRS Fork
• High tensile Stainless Steel Rod Tension System. • Designed for performance and also aesthetic appeal. • Threads are hidden for enhanced aesthetic appeal.
• Full traceability - rods and tensioners each come with laser engraved codes.
SRS Technical Features •
Rod Diameter: Metric M16 – M100.
•
Fork Material: Cast 2205 Duplex Stainless Steel
•
Rod Material: 560HTR Grade High Tensile Stainless Steel
•
Lock Nut Material: Cast AISI316
•
Pin Material: Rod 17-4 PH Stainless Steel
•
Surface Treatment: M16 – M45 Matte finish M56 – M100 Gloss finish Copyright © 2011 Strudyna
Threads must be lubricated with NICKEL ANTI SEIZE To PREVENT GALLING Information used exclusively under permission of Strudyna Co. Ltd
Online catalogue: www.anzor.co.nz/tension-rod www.anzor.co.nz/arch
89
SRS - HIGH TENSILE STAINLESS ROD
SRS PERFORMANCE DATA SRS (fork)
SRS (fork)
560HTR Rod
A
ØD
Ø Rod
min
max
Pin to Pin Pin-to-Pin Middle adjustment
Middle adjustment Rod Size (Ø)
A (mm)
ØD (mm)
Adjustment +/-
Yield Load* (kN)
Tensile Load (kN)
M16
16
16
32mm
109
137
M20
20
20
40mm
171
214
M22
22
22
44mm
169
243
M24
24
25
48mm
197
283
M30
26
30
46mm
288
364
M33
30
33
50mm
357
451
M36
34
36
54mm
420
531
M39
36
39
60mm
502
634
M42
40
42
64mm
577
728
M45
42
45
68mm
672
848
M48
45
48
72mm
758
957
M52
50
52
78mm
905
1,142
M56
50
56
84mm
933
1,258
M60
55
30
70mm
1,086
1,464
M64
56
34
60mm
1,231
1,659
M68
61
68
60mm
1,405
1,894
M72
66
72
60mm
1,593
2,147
M76
72
76
50mm
1,788
2,411
M80
72
80
50mm
1,998
2,693
M85
76
85
50mm
2,275
3,067
M90
82
90
50mm
2,571
3,465
M100
88
100
50mm
3,220
4,340
*Design load: standard safety factor for structural tensile application is 60% of yield load. Also see your obligations regarding Safe Working Loads on p.105. NB: never use rod for lifting purposes.
Accessories
LE AVAIL AB R E D R O TO x appro D eliver y 4 months
RDS curtain wall joiner with movable articulation
RDS curtain wall joiner with fixed articulation
SRS 560HTR with 4 way connector plate. SRS 560HTR with a perpendicular T-Joiner.
90
SRS 560HTR with 3 way connector plate.
Online catalogue: www.anzor.co.nz/tension-rod Information used exclusively under permission of Strudyna Co. Ltd
GALVANIZED ROD SYSTEM
galvanized fork + rod TENSION system • Produced by a high quality European manufacturer. • Supplied to thousands of projects worldwide. • Designed for performance and also aesthetic appeal. • An economical, high quality choice for your next rod tensioning project. Galv Fork
Galv Fork
Rod Joiner (sold separately)
ØD
Galv Rod
Locking Nut
A
Ø Rod NB: illustrations are not an exact representation of the product. Please contact us for technical drawings.
available to order Delivery times:
Pin-to-Pin Middle adjustment
Rod Size (Ø)
A (mm)
ØD (mm)
Adjustment +/- (mm)
Yield Load (kN)
M10
10
10
14
26.3
M12
12
11
12
38.3
Small Orders
M16
15
15
23
71.2
Fork size M24 and smaller and a quantity of up to 10 rods. Delivery approx 10 working days
M20
18
17
29
111.0
M24
23
23
35
160.0
M27
23
25
40
208.0
M30
28
29
43
254.0
LARGE Orders
M36
28
33
52
371.0
Size and qty on application.
M42
33
37
61
509.0
Please contact us for estimated delivery times.
M48
38
41
68
669.0
M52
43
46
75
798.0
M56
43
51
82
922.0
M60
48
56
85
1,073.0
M64
53
56
89
1,215.0
M70
58
61
101
1,463.0
M80
68
71
116
1,910.0
M90
78
80
128
2,418.0
M100
83
90
141
2,985.0
Rod Joiners
Available on request. (sold separately)
ØD = the hole diameter in the fork that accommodates the clevis pin
Yield Stress of 460 N/mm2 equal to 460 MPa For full technical specifications & installation guide please contact one of our architectural product managers.
Online catalogue: www.anzor.co.nz/tension-rod
91