foliage systems
foliage systems
FOLIAGE SYSTEM OVERVIEW
MODERNISE A WALL OR FENCE BY GROWING FOLIAGE OVER A STAINLESS STEEL WIRE TRELLIS
This stainless steel wire system provides a flexible and permanent trellis that makes featureless walls and fences come to life. BENEFITS • • • • •
Strong, yet lightweight. Durable. 316 Stainless Steel components. Easy installation - only hand tools required. System can generally be configured to your working space.
POSSIBLE APPLICATIONS • • • • •
Fences, feature walls, pillars. Residential and commercial gardens. Tilt-slab walls. Growing a specific shape of pattern. Bridge sidings (protection against graffiti).
NOT RECOMMENDED FOR SITUATIONS WHERE THERE IS A RISK TO THE WATERTIGHTNESS OF A BUILDING. E.g. PLASTER AND TIMBER CLADDING.
Online catalogue: www.anzor.co.nz/foliage-systems
127
FOLIAGE SYSTEM COMPONENTS
FOLIAGE SYSTEM COMPONENTS GR1025 +GR1051
GR1025
1
GR1025
GR1025
GR1025
GR1025 +GR1051
GR1025 +GR1052
GR1025 +GR1052
2 GR1045
GR1044 GR1045
GR1025 +GR1052
3
GR1044
GR1025 +GR1052
4 GR1025 +GR1052
GR1025 +GR1052 GR1025 +GR1051
GR1025 GR1025 +GR1051
5
GR1025
GR1025
GR1025
The example above shows a possbile scenerio measuring approx. 2.0m high x 2.5m wide. Recommended distance between the eyes is 500mm
Using a diagonal trellis construction, Anzor’s foliage system supports vines, climbers, and scrambling plants.
WIRE TYPE: LATTICE FORMATION For the wire to be strung in a lattice formation as shown above. Use 3mm 7x19 316 flexible wire (see p.105)
WIRE TYPE: STRAIGHT when running wire in a straight line with no bends.
2
1
For a list of items and stock codes
4
3
GR1044
See page 129-130 119
GR1025 + GR1052
GR1025 + GR1051
GR1045
Use 3mm 1x19 316 rigid wire (see p.105)
5
GR1025
NOT RECOMMENDED FOR SITUATIONS WHERE THERE IS A RISK TO THE WATERTIGHTNESS OF A BUILDING. E.g. PLASTER AND TIMBER CLADDING.
128
Online catalogue: www.anzor.co.nz/arch www.anzor.co.nz/foliage-systems
FOLIAGE SYSTEM - SOLID WALL
SOLID WALL APPLICATIONS 1
2
3
Wire End Termination Garden Eye for solid wall - M8x25mm 316SS (GR1025)
Thread length - 25mm Spacing from wall - 100mm Thread size - 8mm
Dead End with grub screw 316SS (GR1051)
Loosen screws and thread wire in.
Drop-In Anchor - M8 316SS (DYDIM608 - see p.143)
Setting tool required for proper installation. NB. Setting Tool Sold Separately.
Garden Eye and Adjuster Eye Bolt for solid wall - M8x25mm 316SS (GR1025)
Thread length - 25mm Spacing from wall - 100mm Thread size - 8mm
Adjuster units 316SS (GR1052)
Gives 15mm of tensioning capability.
Drop-In Anchor - M8 316SS (DYDIM608 - see p.143)
Setting tool required for proper installation. NB. Setting Tool Sold Separately.
Middle supports (where required). Use for increased stability, if wire span is up to, but not greater than 2100mm and/or heavy plants will be attached.
Cross Clamp - M4 316SS (GR1044)
4
5
E X-STO EX TOCK CK SUBJ SU B JEC EC T T TO OP PR R IOR S SA ALLE E
Remove grub screw and insert wires and replace grub screw to secure. Use Loctite for permanent fixing.
Middle supports with stud (where required). Cross Clamp - M8 x 25mm 316SS (GR1045)
(see above) Use if wire span is greater than 2100mm, then install half way along the length of where the wires cross over.
Drop-In Anchor - M10 316SS (DYDIM610 - see p.143)
Setting tool required for proper installation. NB. Setting Tool Sold Separately.
Perimeter Supports Garden Eye for solid wall - M8x25mm 316SS (GR1025)
Thread length - 25mm Spacing from wall - 100mm Thread size - 8mm
Drop-In Anchor - M8 316SS (DYDIM608 - see p.143)
Setting tool required for proper installation. NB. Setting Tool Sold Separately.
NOT RECOMMENDED FOR SITUATIONS WHERE THERE IS A RISK TO THE WATERTIGHTNESS OF A BUILDING. E.g. PLASTER AND TIMBER CLADDING.
Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch
129
FOLIAGE SYSTEM - TIMBER
TIMBER APPLICATIONS 1
2
3
Wire End Termination Garden Eye for timber 316SS (GR1027)
Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm
Dead End with grub screw 316SS (GR1051)
Loosen screws and thread wire in
Garden Eye and Adjuster Garden Eye for timber 316SS (GR1027)
Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm
Adjuster units 316SS (GR1052)
Gives 15mm of tensioning capability.
Internal Supports (where required) Use for increased stability, if wire span is up to, but not greater than 2100mm and/ or heavy plants will be attached.
Cross Clamp - M4 316SS (GR1044)
4
Remove grub screw and insert wires and replace grub screw to secure. Use Loctite for permanent fixing.
Internal Supports (where required) (see above) Use if wire span is greater than 2100mm, then install half way along the length of where the wires cross over.
Cross Clamp with wall fixing 316SS (GR1047)
5
EX-STOCK SUBJEC T TO PR IOR SALE
Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm
External Supports Thread length - 40mm Spacing from wall - 100mm Thread size - 8mm
Eye Bolt for timber 316SS (GR1027)
N.B: NOT RECOMMENDED FOR TIMBER CLADDING DUE TO ISSUES WITH WATER TIGHTNESS.
GR1053 Foliage Spanner Used to tighten the collar of the garden eyes, which then works as a lock-nut to keep the eyes in the right position and prevent tampering with the system. Spanner sold separately Product code: FOLGR1053
130
Online catalogue: www.anzor.co.nz/arch www.anzor.co.nz/foliage-systems
FOLIAGE SYSTEM INSTALLATION
INSTALLATION GUIDE 1.
Before you start to install the system, we recommend you attach small nails where the eyes will be installed, and run strings between them to make sure you are happy with the pattern (you could base your pattern on that shown on p.128).
2.
When you are satisfied with the pattern, drill the holes and install the eyes.
3.
Thread the wires through the eyes in the same way as you did with the strings, to create the trellis system.
4.
Attach the end fittings.
5.
When you install the second wire, try to weave the wire into the first one by alternating between going over and under the first wire. This will minimise need for cross clamps.
6.
When both wires are installed, tension the wires at the adjuster units.
7.
If using wire cross over clamps install these last, after tensioning the system.
NB: The cross clamps stabalise the system at the crossings of the wires.This is needed if the wall span is more than 2 metres and/or the plants are heavy.
ALTERNATIVE FOLIAGE OPTIONS HORIZONTAL WIRE RUNS S3191P 316SS Mini M5 Jaw/ Swage Pipe Turnbuckle.
M6 Drop-In Anchors. 316 SS(DYDIM606)
(MFTBPJSMM605)
For wire length of no more than 3m, otherwise use S3121P-06.
3.0mm 7x19 316SS Flexible Wire. S3191 M6 x 60 304SS Eyebolts. (MFEBM406060)
(MFW030719)
M3 Nickle Plated Copper Wire Crimp. (MFWCM03N) Wire looped through eye + crimped. Not recommended for high loading.
TOOL HIRE - Anzor has hex swaging tools and crimping tools available to hire contact your local branch.
Not recommended for situations where there is a risk to the watertightness of a building. E.g. Plaster and timber cladding.
Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch
131
ALTERNATIVE FOLIAGE OPTIONS
ALTERNATIVE FOLIAGE SYSTEM OPTIONS Vertical runs on columns - pictured on page 121
Vertical Run On Columns - up to 3.0m. S7801 - 3mm x M6 Swage Stud GR1052 Adjuster Unit
GR1052 Adjuster Unit 1x19 3mm Wire Rope
GR1025 Garden Eye.
GR1025 Garden Eye.
M8 Drop-in Anchor
M8 Drop-in Anchor
Possible Issue with Vertical Run On Columns over 3.0m Force
Force Garden eyes bend inwards when adjuster units over tightened.
Solution: Vertical Run On Columns over 3.0m. S3127P Pipe Turnbuckle plus swage stud (MFTBPFFM606)
Anzor ASS Wall Bracket (see next page)
Anzor ASS Wall Bracket
ASS Wall Bracket - helps reduce the load and prevent the garden eyes bending. See p.123 for full ASS Wall Bracket details.
132
Online catalogue: www.anzor.co.nz/arch www.anzor.co.nz/foliage-systems
ALTERNATIVE FOLIAGE OPTIONS
EX-STOCK SUBJEC T TO PR IOR SALE
ANZOR ASS WALL BRACKET
ASS Wall Bracket (product code: AWBY)
M12 Bolt & Nut
M12 Drop-in Anchor (Sold separately)
Anzor ASS Wall Bracket - Y Type •
Slim and unobtrusive design.
•
Can fit up to 5mm Eye Terminal.
•
Attach Eye Terminal at the top and S3121P Jaw Swage Pipe Turnbuckle at the bottom.
•
Made from 304 Stainless Steel.
•
Product code: AWBY.
Securing Screw + Nut (included with bracket)
S7802F Eye Terminal Wire size 3.0mm (MFSWET603)
S3127P Pipe Turnbuckle plus S7801 RH Swage Stud End Termination (MFTBPFFM606)
Depending on the length of wire and potential load, two turnbuckles may be required for tensioning.
ASS Wall Bracket - dimensions
LOCTITE
Size
d1 (mm)
d2 (mm)
d5 (mm)
b
s (mm)
70 x 13
13
70
30
M6
8.5
We recommend applying Loctite 243 after installation for permanent fixture.
LOOKING FOR FASTENERS? See our complete range of fasteners at the back of this catalogue p.138
Online catalogue: www.anzor.co.nz/foliage-systems www.anzor.co.nz/arch
133
ALTERNATIVE FOLIAGE OPTIONS
EX-STOCK SUBJEC T TO PR IOR SALE
ALTERNATIVE FOLIAGE OPTIONS WALL BRACKET - for connection with jaws 30mm
160mm
Ø9mm 125mm
VERTICAL RUNS ON COLUMNS
Wall Bracket with Jaws Hex Setscrew
M8x30 - 316SS (BHM408030S)
304SS (AWBJ)
Spacing from wall - 125mm Hole size - 9.5mm
Jaw/Swage Pipe Turnbuckle (S3121P)
Drop-In Anchors
M6 / 3.0mm - 316SS (MFTBPJSM606)
M8 - 316SS (DYDIM608)
Drop-in Anchor Setting Tool Required.
Wire Rope
3.0mm 1x19 316 Stainless Steel wire (MFW030119)
Swage Fork Terminal (S7803)
3mm - 316SS (MFSWFT403)
Eye Bolt (S3191) M8 x 130 - 304SS (MFEBM408130)
NOT RECOMMENDED FOR SITUATIONS WHERE THERE IS A RISK TO THE WATER TIGHTNESS OF A BUILDING. E.g. PLASTER AND TIMBER CLADDING.
134
Online catalogue: www.anzor.co.nz/arch www.anzor.co.nz/foliage-systems