HD plasma cutter
HD lasma cutting systems HD lasma cutting systems use shop compressed air as the cutting gas and that compressed air heavily oxidizes the cut surface of stainless and aluminum. When cut with air plasma, the cut face of aluminum will be covered in aluminum oxide. This causes the cut face to be rough and crusty, requiring additional labor to grind the surface before applying weld metal. A similar affect happens when air plasma is used to cut stainless steel; the cut face will be covered in nickel oxide.
This will cause a dark grey and crusty cut face and, again, require additional labor. When steel is cut with compressed air, the cut face will be impregnated with nitrides because air is 79% nitrogen. The cut face may appear clean and smooth but the nitrides are under the surface. The surface will need to be ground off before applying weld metal. The price of a High Definition Plasma cutting machine is larger than other machines, but you get what you pay for. Low cost air plasma systems deliver approximately 500 starts in comparison to an HD system that delivers 3,000 starts or more.
The HD system delivers The HD system delivers six times the amount of starts, allowing fabricators to produce high quality results faster. The cut parts produced from low cost air systems have significantly beveled edges. These beveled edges and dross on the bottom of parts results in an increase in labor costs to grind the parts. The operating costs with a compressed air system also increase due to the impact on consumables. Compressed air system consumables begin wearing out almost immediately, impacting cut quality and accuracy. High-Definition Plasma Cutter or HD Plasma cutter is the most vital cutter – required in different applications and industry verticals to cut metal parts, plastic parts, steel and even anything else with precision and without taking so much of time. Also called as CNC Plasma cutter and high density plasma cutters, such plasma cutter is based on advanced cutting technology, in which plasma
arc is forced through a smaller nozzle to achieve cleaner, squarer cut edges and at the same time as achieving up to standard parts life in torch. If you are looking for the latest models of HD plasma cutters, you have come at the right place – Arc Bro. We are involved in designing and supply of premium quality HD plasma cutters, that are easy to use and come with a number of added features. HD Plasma Machine has been engineered to give you all the best quality Hypertherm Components to combine to give you the most affordable High Definition Plasma Cutting Machine on the Australian Market Today.
Meaning you get the best quality Hypertherm Cut including the Hypertherm Patented "True Hole Technology" all at the best prices. With the Hypertherm Controller and Height Sensor it automatically changes the height of your torch to suite the amount of use of your plasma consumables which means you do not need to change them straight away. Unlike other systems which you will have to fiddle around with the controller to get the optimum torch height levels if it has the option at all.