TM
Your Complete Source for Architectural Products and Specialty Millwork
Introduction Arch Mill Specialties is a unique supplier of hard to find high end architectural products and specialty millwork. Arch Mill is dedicated to fulfilling the needs of the trade with quality products and personal service. Your advantages with Arch Mill Specialties are: - Knowledgeable staff - Design selection - Large product inventory - Custom capabilities - Trade discounts Arch Mill Specialties is pleased to provide you with this quick reference catalog which contains a sampling of our architectural products of timeless design, most of which we inventory for quick shipment. Arch Mill Specialties continues to develop and expand our product range to meet the growing demands for innovative and environmentally responsible products. Arch Mill Specialties is your complete source for architectural products and specialty millwork. Contact an Arch Mill representative today for a product quotation and specifications. ©Arch Mill Specialties 2007
Shown with Arch Mill mouldings
TM
( 1.888.330.ARCH (2724) Fax: 1.888.330.2725 Email: sales@arch-mill.com New York Manhatten: Congers: Valley Stream:
212.696.2724 845.267.2724 516.596.2724
New Jersey Morristown:
973.984.2724
Connecticut Greenwich:
203.661.2724
Shown with Arch Mill mouldings
Contents Polyurethane Mouldings - Crown ...........................2 Polyurethane Mouldings Panel and Chair Rail ........................................12 Pilasters & Architraves ..........................................17 Carved Wood - Composite Mouldings ................18 MDF, Wood and Flexible Mouldings ...................20 Interior Doors and Hardware ................................38 Domes.......................................................................44 Ceilings: Vaulted and Coffered ............................46 Polyurethane Corbels ............................................ 47 Medallions ...............................................................48 Niches and Rosettes ..............................................50 Fireplaces ................................................................51 Polyurethane Decor Items.....................................52 Columns, Pergolas and Porticos .........................53 Exterior Doors and Hardware ...............................56 Exterior Trim: Pediments, Crossheads and Sunbursts .........62 Exterior Trim: Pilasters and Louvers ..................64 Exterior Trim: Brackets and Dentils....................65 Exterior Mouldings: Polyurethane .......................66 Balustrade Systems: PVC ..................................... 70 Balustrade Systems: Polyurethane...................... 72 Exterior Trim: PVC Mouldings & Trimboards ... 76 Exterior Trim: Window Trim Kits.......................... 77 Custom Exterior ~ Historical Reproductions ........ 78 Shutters ....................................................................80 Ordering & Technical Information .......................81 Shown with Arch Mill mouldings
1
Polyurethane Mouldings – Crown C1110.4
Shown with Dentil D1101
Cornice Length: 8' • Design Repeat: 11⁄2" Face: 101⁄2"
73⁄4"
7"
Shown with Arch Mill mouldings
C1148
C1139
Cornice Length: 8' • Design Repeat: 1" Face: 45⁄8"
3"
Cornice Length: 8' • Design Repeat: 19⁄16" Face: 37⁄8"
23⁄4"
31⁄2"
31⁄8"
C1160
C1154
Cornice Length: 8' • Design Repeat: 13⁄8" Face: 6"
41⁄4"
Cornice Length: 8' • Design Repeat: 41⁄8" Face: 53⁄8"
35⁄8"
47⁄8"
33⁄8"
TM
2
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
C1177
Shown with Dentil D1107
Cornice Length: 8' • Design Repeat: 15⁄16" Face: 77⁄8"
51⁄4"
53⁄8"
Shown with C1165 and C1767
C1172
C1165
5"
Cornice Length: 8' • Design Repeat: 11⁄4" Face: 7"
55⁄8"
Cornice Length: 8' • Design Repeat: 111⁄4" Face: 8"
5"
Cornice Length: 8' • Design Repeat: 67⁄8" Face: 61⁄2"
5"
41⁄4"
55⁄8"
C1181
Shown with C1181 and custom frieze TM
sales@arch-mill.com
3
Polyurethane Mouldings – Crown C1435
Cornice Length: 8' • Design Repeat: 2" Face: 35⁄8"
31⁄8"
13⁄4"
C1439
Cornice Length: 8' • Design Repeat: 111⁄4" Face: 37⁄8"
3"
21⁄2"
Shown with C1439
C1448
C1442
Cornice Length: 8' • Design Repeat: 111⁄16" Face: 41⁄4"
3"
Cornice Length: 8' • Design Repeat: 17⁄8" Face: 41⁄2"
35⁄8"
3"
3"
TM
4
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
C1462
C1452
Cornice Length: 8' • Design Repeat: 111⁄4" Face: 51⁄4"
23⁄4"
Cornice Length: 8' • Design Repeat: 63⁄8" Face: 61⁄4"
21⁄2"
Cornice Length: 8' • Design Repeat: 5" Face: 61⁄8"
51⁄2"
4"
31⁄2"
C1454
C1463
55⁄8"
Cornice Length: 8' • Design Repeat: 8" Face: 51⁄2"
47⁄8"
25⁄8"
Shown with C1454, R2414, R2710, PC2913 and B4413 TM
sales@arch-mill.com
5
Polyurethane Mouldings – Crown C1456
Cornice Length: 8' • Design Repeat: 15⁄8" Face: 51⁄2"
4"
4"
C1470 Shown with C1474 and custom ceiling tiles
C1474 Cornice Length: 8' • Design Repeat: 13⁄16" Face: 71⁄8"
47⁄8"
47⁄8"
Cornice Length: 8' • Design Repeat: 31⁄2" Face: 71⁄4"
47⁄8"
Cornice Length: 8' • Design Repeat: 111⁄4" Face: 77⁄8"
51⁄8"
51⁄4"
61⁄4"
C1479
Shown with C1470
TM
6
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
C1485
Cornice Length: 8' • Design Repeat: 11⁄4" Face: 81⁄2"
63⁄8"
55⁄8"
C1486
5"
Cornice Length: 8' • Design Repeat: 4" Face: 85⁄8"
7"
Shown with C1485
Shown with C1474 and custom ceiling tiles TM
sales@arch-mill.com
7
Polyurethane Mouldings – Crown
Shown with C1498, C1499 and C1797
C1469
Cornice Length: 8' • Face: 65⁄8 34" Design, 1 per length
Small Inside Corner
Small Plain
C1468
C1767
Small Decor
C1469
Large Inside Corner
Large Plain
Large Decor
C1498
C1797
C1499
51⁄4"
41⁄4"
C1498 Shown with C1469
C1468 Cornice Length: 8' • Face: 9 ⁄8 2 Design Mitres per Length 5
63⁄4"
7"
Cornice Length: 8' • Face: 65⁄8 2 Design Mitres per Length
51⁄4"
41⁄4"
C1499
Cornice Length: 8' • Face: 95⁄8 48" Design, 1 per length
63⁄4"
7"
Shown with C1468 TM
8
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
C1767
Cornice Length: 8' • Face: 65⁄8 No Design Repeat
51⁄4"
41⁄4"
Shown with C1110.4, C1767 and R2717
Shown with C1767 and C1110.4 with D1101
C1797
Cornice Length: 8' • Face: 95⁄8 No Design Repeat
63⁄4"
7"
Shown with C1767 TM
sales@arch-mill.com
9
Polyurethane Mouldings – Crown C1749 C1746
Cornice Length: 8' • No Design Repeat Face: 41⁄2"
13⁄4"
43⁄4"
31⁄4"
31⁄4"
Cornice Length: 8' • No Design Repeat Face: 43⁄4" Can be used as door or window crosshead. See page 17.
C1753
Cornice Length: 8' • No Design Repeat Face: 53⁄4"
31⁄4"
41⁄4"
C1763
Cornice Length: 8' • No Design Repeat Face: 61⁄8"
53⁄4"
23⁄8"
Shown with C1474, C1470, C1753 and M3301
TM
10
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
C1773
C1772
Cornice Length: 8' • No Design Repeat Face: 73⁄8"
51⁄8"
Cornice Length: 8' • No Design Repeat Face: 73⁄4"
55⁄8"
41⁄4"
6"
Light cove moulding
Shown with light cove, C1773
C1777
Shown with Dentil D1103
Cornice Length: 8' • No Design Repeat Face: 75⁄8"
Shown with flexible C1777 with D1105 and custom apron
51⁄4"
53⁄8"
TM
sales@arch-mill.com
11
Polyurethane Mouldings – Panel and Chair Rail R2414
R2416
⁄2"
5
13⁄8"
Chair Rail Length: 8' • Design Repeat: 11⁄4"
R2415
Chair Rail Length: 8' • Design Repeat: 13⁄4"
R2417
⁄2"
1
⁄4"
3
Chair Rail Length: 8' • Design Repeat: 1"
Chair Rail Length: 8' • Design Repeat: 2"
15⁄8"
13⁄8"
⁄8"
13⁄8"
1
R2420
⁄8"
3
2"
Chair Rail Length: 8' • Design Repeat: 3⁄8"
R2431
Shown with C1442 with apron, C1110.4 with D1101, R2717 and PC2918
31⁄8"
7
⁄8"
Chair Rail Length: 8' • Design Repeat: 27⁄8"
TM
12
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
R2426
⁄8"
3
21⁄2"
Chair Rail Length: 8' • Design Repeat: 11⁄4" Shown with R2717 and R2416
R2432
R2430
11⁄8" ⁄8"
7
Chair Rail Length: 8' • Design Repeat: 3⁄4"
25⁄8"
31⁄8"
Chair Rail Length: 8' • Design Repeat: 13⁄8"
R2434
R2431
1"
⁄8"
Chair Rail Length: 8' • Design Repeat: 27⁄8"
Chair Rail Length: 8' • Design Repeat: 25⁄16"
31⁄8"
31⁄8"
7
R2442
5
⁄8"
41⁄4"
Chair Rail Length: 8' • Design Repeat: 85⁄8"
R2732
⁄4"
31⁄4"
3
Chair Rail Length: 8' • No Design Repeat
Shown with Arch Mill mouldings TM
sales@arch-mill.com
13
Polyurethane Mouldings – Panel and Chair Rail PC2910 R2710 11⁄8"
17⁄8"
37⁄8"
1" Rail
PC2911 R2710 21⁄2"
31⁄4"
Shown with R2732, R2710 and PC2910 53⁄4"
1" Rail
PC2912 R2710 2"
2"
4"
1" Rail
PC2913 R2710
1" Rail
33⁄4"
61⁄2"
13⁄4"
Shown with R2710 and PC2913 TM
14
( 888.330.ARCH (2724)
PLPremium Adhesive must be used with polyurethane mouldings. See page 81.
PC2921 PC2922
R2421
R2422
10" 51⁄2"
2" Rail 93⁄4"
2" Rail
10"
41⁄4"
Shown with R2422 and PC2922
PC2923 R2423 61⁄4"
31⁄2"
93⁄4"
2" Rail
Shown with C1486, R2421, PC2921 and B4413
TM
sales@arch-mill.com
15
Polyurethane Mouldings – Panel and Chair Rail PC2919 R2717 73⁄4"
73⁄4"
15⁄8" Rail
PC2918 R2717
Shown with R2717 and M3179
51⁄2"
51⁄2"
PC2950 15⁄8" Rail
R2717
37⁄8"
95⁄8"
15⁄8" Rail
PC2917 R2717 31⁄8"
43⁄4"
77⁄8"
15⁄8" Rail
Shown with R2717 and PC2917
TM
16
( 888.330.ARCH (2724)
Pilasters & Architraves Pilasters PC7451
PC7443
PC7450
PC7442
Height: 57⁄8" Top Width: 85⁄8" Bottom Width: 51⁄2" Thickness: 5⁄8"
Height: 95⁄8" Top Width: 67⁄8" Bottom Width: 45⁄8" Thickness: 5⁄8"
Height: 79" Width: 43⁄8" Thickness: 5⁄8"
PC7444
PC7452
Height: 95⁄8" Top Width: 45⁄8" Bottom Width: 5" Thickness: 5⁄8"
Height: 95⁄8" Top Width: 53⁄8" Bottom Width: 53⁄4" Thickness: 5⁄8"
Height: 79" Width: 51⁄8" Thickness: 5⁄8"
C1749
Cornice Length: 8' • No Design Repeat Face: 43⁄4"
43⁄4"
13⁄4"
Can be used as door or window crosshead.
Shown with C1749, R2717, PC2917 and B4712
Shown with PC7450, R2710, PC2912 and D5412.2
TM
sales@arch-mill.com
17
Carved Wood - Composite Mouldings
A9011
A9001
A
A
B
B
A = 41⁄4"
B = 31⁄8"
A = 35⁄16"
B = 41⁄8"
A9013
A9003
A
A
B
B
A = 37⁄8"
B = 41⁄2"
A = 37⁄16"
B = 41⁄2"
A9015
A9005
A
A B
B
A = 31⁄8"
B = 41⁄2"
A = 33⁄8"
B = 47⁄16"
A9017
A9007 A
A
B
B
A = 33⁄4"
A = 21⁄2"
B = 51⁄4"
B = 31⁄4"
A9019
A9009 A
A
B
B
A = 33⁄4"
A = 35⁄16"
B = 51⁄4"
B = 41⁄8"
TM
18
( 888.330.ARCH (2724)
Moulding is available in any hardwood, standard unfinished. Prefinishing is available as a special order. Contact your sales representative for additional profiles and designs.
A9201
A9101
⁄16" x 33⁄16"
13
⁄16" x 35⁄8"
13
A9203 A9103
⁄16" x 33⁄16"
13
7
⁄8" x 5"
A9205
A9105 11⁄16" x 39⁄16"
A9207 ⁄16" x 35⁄8"
13
A9107
⁄16" x 23⁄4"
13
A9301
⁄16" x 31⁄2"
13
3
⁄4" x 13⁄4"
A9109 A9303
⁄16" x 41⁄2"
13
3
⁄4" x 13⁄8"
TM
sales@arch-mill.com
19
Polyurethane MDF, Wood Mouldings and Flexible– Mouldings Crowns CU
Dentil Mouldings An
A1005 A1007 A1019
OU
yp
A6061 A6063
A1005 • 13⁄16" x 33⁄4" Available in: Poplar • Oak 1
al. rofile, any materi
A6063 • 3⁄4" x 31⁄2" Available in: Primed Pine
A1019 • 1 ⁄16" x 5 ⁄2" Available in: Poplar • Oak 5
R S PECIALTY
A6061 • 1⁄2" x 11⁄2" Available in: Clear Pine
A1007 • 1 ⁄16" x 4 ⁄2" Available in: Primed Pine • Poplar 1
M MOU LD I N STO GS
1
A6065
⁄4" x 15⁄8" Available in: Clear Pine Primed Pine
3
Shown with Arch Mill mouldings
Crown Mouldings
A1003
⁄2" x 35⁄8" Available in: MDF Clear Pine Primed Pine 1
A1011
5 ⁄8" x 45⁄8" Available in: MDF Clear Pine Primed Pine
Shown with A1011
TM
20
( 888.330.ARCH (2724)
A1031
A1013
⁄16" x 25⁄8" Available in: Clear Pine Primed Pine
9
⁄16" x 51⁄4" Available in: MDF Clear Pine Primed Pine
11
Shown with Arch Mill mouldings
A6041 A1033
Crown Apron ⁄16" x 41⁄4" Available in: Solid Pine
11
A1001
⁄4" x 35⁄8" Available in: MDF • Poplar 3
A6043
A3015
5 ⁄8" x 59⁄16" Available in: MDF
A1009
5 ⁄8" x 41⁄2" Available in: MDF
9 ⁄16" x 13⁄4" Available in: Solid Pine
⁄16" x 23⁄4" Available in: Solid Pine
9
A1015
A1017
3 ⁄4" x 51⁄4" Available in: MDF • Poplar
3 ⁄4" x 51⁄4" Available in: MDF
TM
sales@arch-mill.com
21
MDF, Wood and Flexible Mouldings
A1025
A1021
⁄16" x 45⁄8" Available in: MDF • Poplar
11
⁄4" x 515⁄16" Available in: MDF
3
Shown with Arch Mill mouldings
A1023
A1027 A1029
1" x 515⁄16" Available in: MDF
13⁄16" x 81⁄2" Available in: MDF • Poplar
13⁄16" x 101⁄2" Available in: MDF • Poplar
TM
22
( 888.330.ARCH (2724)
Solid Crown A1035
A1091
⁄16" x 15⁄8" Available in: Solid Pine
1" x 23⁄4" Available in: MDF
11
A1093
11⁄4" x 23⁄4" Available in: MDF
Shown with Arch Mill mouldings
Crown
A1039
A1037
A1041 A6001
13⁄16" x 513⁄16" Available in: MDF
⁄4" x 59⁄16" Available in: MDF • Poplar 3
⁄16" x 15⁄8" Available in: Solid Pine
9
1" x 73⁄8" Available in: MDF • Poplar
TM
sales@arch-mill.com
23
Polyurethane MDF, Wood Mouldings and Flexible– Mouldings Crowns Casings CUSTOM ARCHES Available in Wood, MDF or Resin Material (any profile)
CONFIGURATION TOP ROUND R
A2001
A2003
CONFIGURATION ELIPTICAL
H
H
Leg
W Template (or) Window # Required
D CONFIGURATION ARCH
⁄4" x 3" Available in: MDF
3
⁄8" x 31⁄4" Available in: MDF • Clear Pine
5
H W
A2005
A2009
⁄8" x 31⁄2" Available in: MDF • Poplar
1" x 37⁄16" Available in: MDF Clear Pine
A2013
A2015
7
⁄4" x 31⁄2" Available in: MDF
3
A2011
⁄4" x 31⁄2" Available in: MDF
3
A2017
⁄4" x 31⁄2" Available in: MDF
3
⁄4" x 31⁄2" Available in: MDF
3
Shown with Arch Mill mouldings TM
24
( 888.330.ARCH (2724)
S CU
An
A2019
A2021
1" x 41⁄4" Available in: MDF • Poplar
OU
yp
R S PECIALTY
S
al rofile, any materi
.
A2023
1" x 31⁄2" Available in: MDF
11⁄4" x 39⁄16" Available in: MDF
A2027
A2029
A2031
1" x 37⁄8" Available in: MDF • Poplar
11⁄8" x 4" Available in: MDF • Poplar
1" x 41⁄8" Available in: MDF
A2033
MOU LD I NG TOM
A2037 A2039
13⁄16" x 45⁄8" Available in: MDF • Poplar
13⁄16" x 51⁄4" Available in: MDF • Poplar
⁄16" x 21⁄2" Available in: Solid Pine 11
TM
sales@arch-mill.com
25
MDF, Wood and Flexible Mouldings
A2041 A2043
1" x 31⁄8" Available in: MDF • Poplar
11⁄8" x 41⁄2" Available in: Primed Pine Shown with Arch Mill mouldings
A2057
A2047 A2045
A2053
⁄8" x 21⁄4" Available in: MDF Clear Pine 5
⁄16" x 21⁄2" Available in: Solid Pine 11
⁄16" x 31⁄2" Available in: Solid Pine
11
1" x 41⁄2" Available in: MDF • Poplar
Back Bands A5021
A5023
A5025
⁄16" x 11⁄8" Dado: 1⁄4" x 11⁄16" Available in: Primed Pine • Clear Pine
⁄16" x 11⁄8" Dado: 1⁄4" x 11⁄16" Available in: Clear Pine
1" x 111⁄16" Dado: 1⁄4" x 11⁄8" Available in: Primed Pine
11
11
TM
26
( 888.330.ARCH (2724)
A5027
A5029
7 ⁄8" x 115⁄16" Dado: 1⁄4" x 3⁄4" Available in: MDF
13⁄8" x 13⁄4" Dado: 5⁄8" x 11⁄8" Available in: Primed Pine
Shown with Arch Mill mouldings
Base Caps A5061
A5063
⁄4" x 13⁄8" Available in: MDF • Clear Pine
A5067
A5065
1" x 13⁄4" Dado: 5⁄16" x 3⁄4" Available in: MDF
3
⁄4" x 13⁄4" Available in: MDF
3
⁄4" x 13⁄8" Available in: MDF
3
A5069
A5073
A5071 ⁄16" x 21⁄4" Available in: Solid Pine
11
A5075
11⁄8" x 31⁄2" Available in: Primed Pine
11⁄16" x 21⁄2" Available in: Primed Pine
A5077
⁄16" x 11⁄4" Available in: Solid Pine
⁄8" x 15⁄8" Available in: Solid Pine
11
5
TM
sales@arch-mill.com
27
MDF, Wood and Flexible Mouldings CONVEX CURVE
CONCAVE CURVE
Trim
A3001
A3003
⁄2" x 31⁄4" Available in: MDF Clear Pine
1
Trim
Wall ISR OSR
Custom Curved Base Mouldings available. Specify your requirements.
A3005
⁄2" x 31⁄4" Available in: MDF Clear Pine
1
Wall
A3007 A3009
⁄2" x 51⁄4" Available in: MDF Clear Pine
A3011
1
⁄8" x 5" Available in: MDF 5
⁄16" x 51⁄4" Available in: MDF
9
5 ⁄8" x 51⁄4" Available in: MDF
A3015 A3017
A3013
A3019
⁄8" x 5 ⁄4" Available in: MDF 5
1
5 ⁄8" x 59⁄16" Available in: MDF
3 ⁄4" x 61⁄2" Available in: MDF • Poplar
⁄16" x 71⁄4" Available in: MDF
9
TM
28
( 888.330.ARCH (2724)
A3021
A3023 A3027
A3025 ⁄8" x 73⁄8" Available in: MDF 7
⁄8" x 73⁄8" Available in: MDF 7
1" x 8" Available in: MDF Poplar
A3035
5 ⁄8" x 81⁄4"' Available in: MDF
A3031
A3033
A3029 3 ⁄4" x 7" Available in: MDF • Poplar
⁄4" x 45⁄8" Available in: MDF • Poplar
3
3 ⁄4" x 51⁄4" Available in: MDF • Poplar
3 ⁄4" x 9" Available in: MDF • Poplar TM
sales@arch-mill.com
29
Polyurethane MDF, Wood Mouldings and Flexible– Mouldings Crowns Picture Moulding A7091
11 ⁄16" x 21⁄4" Available in: MDF
Shown with Arch Mill mouldings
Rosettes, Plinths & Keystones Rosettes, Plinth Blocks and Keystones can be special ordered in any size, shape and species (minimum quantities apply).
A9041 A9043 A9045 A9047 A9049 A9051 A9053 A9055
A9061 A9063 A9065
A9061 • 1" x 31⁄2"
A9063 • 1" x 41⁄2"
A9065 • 1" x 51⁄2"
Available in: Solid Pine
A9071
A9041 • 1" x 21⁄2"
A9043 • 1" x 23⁄4"
A9045 • 1" x 31⁄2"
A9047 • 1" x 33⁄4"
A9049 • 1" x 41⁄2"
A9051 • 11⁄4" x 33⁄4"
A9053 • 1 ⁄4" x 4 ⁄4" A9055 • 1 ⁄4" x 5 ⁄2"
1" x 33⁄4" x 6"
Available in: Solid Pine
Available in: Solid Pine
1
1
1
1
TM
30
( 888.330.ARCH (2724)
CU
Fluted Casing & Pilasters
An
M MOU LD I N STO GS
OU
yp
R S PECIALTY
al rofile, any materi
.
Shown with Arch Mill mouldings and columns
A2007
⁄16" x 33⁄8" Available in: MDF
A2025
A2051
⁄4" x 27⁄16" Available in: MDF
11⁄8" x 71⁄4" Available in: Primed Pine Clear Pine
9
3
A2035
A2049
⁄4" x 47⁄8" Available in: MDF
11⁄8" x 51⁄4" Available in: Primed Pine Clear Pine
3
A2055
⁄4" x 41⁄2" Available in: MDF
3
TM
sales@arch-mill.com
31
Polyurethane MDF, Wood Mouldings and Flexible– Mouldings Crowns Wainscoat Cap A7019
A7017
A7015
13⁄8" x 13⁄4" Dado Size: 1⁄4" x 3⁄4" Available in: Primed Pine
⁄16" x 21⁄4" Dado Size: 7⁄16" x 15⁄8" Available in: Clear Pine
11⁄16" x 31⁄4" Dado Size: 1⁄4" x 23⁄8" Available in: Clear Pine
15
Shown with A7005
Wainscoat Paneling A7001 A7003
Standard Bead A7001 • 2" on center • 48" x 96" x 1⁄2" A7003 • 3" on center • 48" x 96" x 1⁄2"
A7005 A7007
V-Bead A7005 • 15⁄8" on center • 48" x 96" x 1⁄2" A7007 • 21⁄2" on center • 48" x 96" x 1⁄2"
A7009
Shown with A7007 V-Groove A7009 • 6" on center • 48" x 96" x 1⁄2"
Beadboard also available in MRI, MRX and PVC boards or sheets
TM
32
( 888.330.ARCH (2724)
Nose & Cove A7043
A7041
⁄16" x 11⁄8" Available in: Clear Pine Primed Pine
11
⁄8" x 3⁄4" Available in: Clear Pine 5
Edge & Center Bead Boards A7011
A7013
⁄16" x 31⁄2" Available in: Primed Pine
3
⁄4" x 51⁄2" Available in: Primed Pine
9
Shown with A7007
S4S Boards Stock #
Dimensions
Oak
Primed Finger Joint Pine
MDF
Poplar
Radiata Pine
Eastern White Pine
Flexible
✓
✓
✓
⁄4" x 2 ⁄2"
✓
✓
⁄4" x 3 ⁄2"
✓
✓
✓
✓
✓
✓
✓
⁄4" x 5 ⁄2"
✓
✓
✓
✓
✓
✓
✓
⁄4" x 7 ⁄4"
✓
✓
✓
✓
✓
✓
✓
⁄4" x 91⁄4"
✓
✓
✓
✓
✓
✓
✓
⁄4" x 11 ⁄4"
✓
✓
✓
✓
✓
✓
✓
A0103
3
A0104
3
A0106
3
A0108
3
A0110
3
1 1 1 1
A0112
3
A5403
1 ⁄8" x 2 ⁄2"
✓
A5404
1 ⁄8" x 3 ⁄2"
✓
A5406
1 ⁄8" x 5 ⁄2"
A5408
11⁄8" x 71⁄4"
A5410 A5412
1
1
1
✓ ✓
✓
✓
✓
✓
✓
✓
✓
11⁄8" x 91⁄4"
✓
✓
✓
1 ⁄8" x 11 ⁄4"
✓
✓
✓
1 1
1
1 1
1
Other species and sizes available on a special order basis. TM
sales@arch-mill.com
33
Polyurethane MDF, Wood Mouldings and Flexible– Mouldings Crowns Chair Rail A4003
1" x 25⁄8" Available in: Primed Pine
A4011
⁄16" x 51⁄2" Available in: Primed Pine
11
Shown with Arch Mill mouldings
A4001
⁄8" x 25⁄8" Available in: MDF • Clear Pine
5
Shown with Arch Mill mouldings
A4009
A4005
A4013
A4007 13⁄16" x 33⁄4" Available in: MDF
11⁄16" x 3" Available in: Primed Pine
⁄16" x 21⁄2" Available in: Solid Pine 9
1" x 33⁄16" Available in: MDF
TM
34
( 888.330.ARCH (2724)
Panel Mouldings A7079
⁄16" x 13⁄4" Available in: Clear Pine Primed Pine • Oak
A7081
11
A7083
3 ⁄8" x 11⁄8" Available in: Clear Pine
⁄8" x 7⁄8" Available in: Clear Pine
3
A7085
⁄16" x 13⁄8" Available in: Clear Pine 5
Shown with Arch Mill mouldings
A7087
⁄8" x 13⁄4" Available in: Oak
5
A7089
11⁄8" x 13⁄4" Dado: 3⁄8" x 3⁄4" Available in: Primed Pine
Shown with Arch Mill mouldings
TM
sales@arch-mill.com
35
Polyurethane MDF, Wood Mouldings and Flexible– Mouldings Crowns Miscellaneous Moulding VISUAL PART NO.
TYPE
DESCRIPTION
A5001
Mullion
⁄8" x 13⁄4" Available in: Solid Pine
A5003
Round Edge Mullion
A5005
VISUAL PART NO.
TYPE
DESCRIPTION
A6045
Cove Moulding
9 ⁄16" x 15⁄8" Available in: Solid Pine
⁄8" x 2" Available in: Solid Pine
A6047
Cove Moulding
⁄16" x 13⁄4" Available in: Solid Pine
Colonial Mullion
3 ⁄8" x 2" Available in: Solid Pine
A6049
Cove Moulding
9 ⁄16" x 21⁄4" Available in: Solid Pine
A5007
Mullion
⁄8" x 13⁄8" Available in: Solid Pine
A6051
Cove Moulding
⁄16" x 23⁄4" Available in: Solid Pine
A5081
Floor Moulding
⁄2" x 3⁄4" Available in: Solid Pine • Oak
A6053
Cove Moulding
⁄4" x 3⁄4" Available in: Solid Pine
A5083
Shoe Moulding
⁄2" x 3⁄4" Available in: Solid Pine Primed Pine • Oak
A6055
Cove Moulding
11 ⁄16" x 11⁄8" Available in: Solid Pine
A5085
Shoe Moulding
1 ⁄2" x 1" Available in: Primed Pine
A7021
Full Round
15⁄16" Diameter Available in: Solid Pine
A5087
Cove Moulding
11 ⁄16" x 11⁄16" Available in: Clear Pine • Primed Pine
A7023
Half Round
⁄4" x 1⁄2" Available in: Clear Pine
A5089
Shoe Moulding
7 ⁄16" x 11⁄16" Available in: Solid Pine
A7025
Half Round
5 ⁄16" x 5⁄8" Available in: Clear Pine
A6021
Lattice
1 ⁄4" x 111⁄16" Available in: Solid Pine
A7027
Half Round
3 ⁄8" x 3⁄4" Available in: Clear Pine
A6023
Lattice
⁄4" x 13⁄8" Available in: Solid Pine
A7029
Half Round
⁄16" x 7⁄8" Available in: Clear Pine
A6025
Lattice
1 ⁄4" x 11⁄8" Available in: Solid Pine
A7031
Half Round
9 ⁄16" x 11⁄8" Available in: Clear Pine
A6027
S4S
7 ⁄16" x 15⁄8" Available in: Solid Pine
A7033
Half Round
11 ⁄16" x 13⁄8" Available in: Clear Pine
A6029
S4S
⁄16" x 25⁄8" Available in: Solid Pine
A7035
Half Round
⁄16" x 15⁄8" Available in: Clear Pine
A6031
S4S
7 ⁄16" x 31⁄2" Available in: Solid Pine
A7037
Half Round
11⁄8" x 21⁄4" Available in: Poplar
3
3
3
1
9
9
3
1
1
7
1
7
11
TM
36
( 888.330.ARCH (2724)
Miscellaneous Moulding VISUAL PART NO.
TYPE
DESCRIPTION
A7039
Chamfer Strip
TYPE
DESCRIPTION
⁄4" x 3⁄4" Available in: Solid Pine
A8033
Tilt Wash Stool
11 ⁄16" x 2" Available in: Solid Pine • Primed Pine
A7061
Colonial Outside Corner
11⁄8" x 11⁄8" Available in: Solid Pine
A8035
200 Series Stool
⁄4" x 51⁄8" Available in: Primed Pine
A7063
Outside Corner
15⁄16" x 15⁄16" Available in: Solid Pine
A8037
Modern Rabbeted Stool
11 ⁄16" x 21⁄4" Available in: Clear Pine
A7065
Outside Corner
11⁄8" x 11⁄8" Available in: Solid Pine
A8039
Flat Stool
⁄16" x 41⁄4" Available in: Primed Pine
A8001
Quarter Round
⁄2" x 1⁄2" Available in: Solid Pine
A8041
Flat Stool
11 ⁄16" x 51⁄4" Available in: Clear Pine • Primed Pine
A8003
Quarter Round
⁄16" x 11⁄16" Available in: Solid Pine
A8043
Flat Stool
11 ⁄16" x 71⁄4" Available in: Primed Pine
A8005
Quarter Round
⁄4" x 3⁄4" Available in: Solid Pine
A8045
Flat Stool
11⁄8" x 6" Available in: Primed Pine
A8007
Quarter Round
11⁄16" x 11⁄16" Available in: Solid Pine
A8047
Casement Stool
11⁄8" x 31⁄4" Available in: Clear Pine
A8020
Rabbeted Stool
⁄16" x 21⁄2" Available in: Clear Pine
A8049
Casement Stool
11⁄8" x 53⁄4" Available in: Clear Pine • Framed Pine
A8021
Rabbeted Stool
⁄16" x 31⁄4" Available in: Clear Pine • Oak
A8051
Clam Shell Stop Moulding
7 ⁄16" x 13⁄8" Available in: Solid Pine
A8022
Rabbeted Stool
11⁄8" x 21⁄2" Available in: Clear Pine
A8053
A8023
Rabbeted Stool
11⁄8" x 31⁄4" Available in: Clear Pine • Primed Pine
A8055
A8025
Rabbeted Stool
11⁄8" x 51⁄4" Available in: Clear Pine
A8027
Narrowline Stool
11 ⁄16" x 43⁄8" Available in: Solid Pine • Primed Pine
A8029
Narrowline Stool
11 ⁄16" x 23⁄8" Available in: Solid Pine • Primed Pine
A8031
Tilt Wash Stool
11 ⁄16" x 4" Available in: Solid Pine • Primed Pine
3
VISUAL PART NO.
11
1
11
3
11
3
11
Colonial Stop Moulding Round Edge Stop Moulding
7 ⁄16" x 13⁄8" Available in: Solid Pine
7 ⁄16" x 13⁄8" Available in: Solid Pine
A8081
Casement Extension Jamb
11 ⁄16" x 4" Available in: Solid Pine • Primed Pine
A8083
Casement Extension Jamb
11 ⁄16" x 23⁄4" Available in: Solid Pine • Primed Pine
A8085
Casement Extension Jamb
11 ⁄16" x 2" Available in: Solid Pine • Primed Pine
A8087
Tilt Wash Extension Jamb
11 ⁄16" x 23⁄16" Available in: Solid Pine • Primed Pine
TM
sales@arch-mill.com
37
Interior Doors and Hardware Hardware A600 Series
A300 Series Bronze Egg Knob Silver Patina A310 Shown In: Mahogany • Glass Oak • Glass
A640 Shown In: Mahogany • Solid
A320 Shown In: Mahogany • Solid Oak • Solid
Clear Old Town Oil Rubbed Bronze
A202
A203
A236
MDF • Solid
MDF • Solid
MDF • Solid
Cortina Lever Satin Nickel
Diamond Crystal Polished Chrome
A300
Durango Lever Medium Bronze Handlesets available in any function, any finish.
38
A330 Shown In: Mahogany • Glass Oak • Glass
A210
A340 Shown In: Mahogany • Solid Oak • Solid
MDF • Solid
TM
( 888.330.ARCH (2724)
HHardware A600 Series
A300 Series
Shown In: A350: Mahogany • Solid A360: Mahogany • 10-Lite A370: Mahogany • 6-Lite
Egg Knob Satin Nickel
A620 Shown In: Mahogany • Solid Oak • Solid
Elan Lever Polished Brass
A248
A251
A255 Electra Frost Lever Polished Chrome
MDF • Solid
MDF • Solid
MDF • Solid
Keyed Waverly Satin Nickel
A300 Series
A380 Shown In: Mahogany • Glass
Many styles available for quick shipment.
sales@arch-mill.com
A400 Series
Shown In: A410: Mahogany • Solid A420: Oak • Glass
Lafayette Brass Polished Brass
TM
39
Interior Doors and Hardware Hardware A400 Series
A600
Lancaster Satin Nickel A470 Shown In: Mahogany • Glass Oak • Glass
A610 Shown In: Mahogany • Solid
Mahogany • Solid Oak • Solid
Luzern Lever Oil Rubbed Bronze
A280
A301
A314
MDF • Solid
MDF • Solid
MDF • Solid
Mercury Lever PVD-Lifetime
Rope Knob Pewter
Rope Lever Oil Rubbed Bronze Handlesets available in any function, any finish.
40
A500 Series
A510: Glass A520: Solid
A530: Glass A540: Solid
TM
( 888.330.ARCH (2724)
HHardware A400 Series
A600 Series Ribbon & Reed Oil Rubbed Bronze
A440 Shown In: Mahogany • Glass Oak • Glass
A430 Shown In: Mahogany • Solid Oak • Solid
A650 Shown In: Mahogany • Solid
Santa Fe Lever Pewter
A327
A415
A605
MDF • Solid
MDF • Solid
MDF • Solid
Turino Lever Polished Chrome
A600 Series
Shown In: A660: Mahogany • 12-Lite A670: Mahogany • 15-Lite
Many styles available for quick shipment.
sales@arch-mill.com
A600 Series
Waverly Knob Oil Rubbed Bronze
Shown In: A635: Mahogany • Glass A630: Mahogany • Solid
TM
41
Interior Doors and Hardware
Oak Oak hardwoods are chosen for their prominent and beautiful grain patterns which vary from a close-knit vertical grain to a sweeping arch. Some color variation is possible in its natural state.
Hickory
Pine Pine (Vertical Grain) is a soft wood that is usually light colored with pink-brown variations offering an ideal surface for stained or painted finishes. The vertical grain cut provides a uniform yet elegant look to the door.
Birch
Pine
Pine
Pine (Knotty)
Pine
is a soft wood that is usually light colored with pink-brown variations in color. The knotty grade is an ideal choice for a rustic door offering its own unique charm with its mix of color, knots and character.
(Cathedral) is a soft wood that is usually light colored with pink-brown variations in color. The flowing, majestic look of the arched grain will add regal appeal to any room it resides in.
Cherry
Maple
Hickory is a hardwood with a coarse texture and closed grain. It is typically a straight grained wood with some waviness. Hickory's contrasting colors range from white to reddish-brown, which add to its overall appeal.
Birch is a
Cherry
Maple is a
hardwood with smooth, fine, uniform grain and characteristic light coloring. Colors can vary from creamy white to medium brown.
hardwoods are rich in color and have a smooth texture with flowing grain patterns. Cherry has a pinkish hue and can exhibit shades of white, yellow, green and gray. Small spots, holes and flecks are characteristic.
close grained hardwood which possesses a uniform texture. It is usually straight grained but is sometimes found with highly figured birdseye or burl grain. Colors can vary from creamy white to light brown.
Mahogany
Poplar
Mahogany is
Poplar
a fine grained hardwood with a medium texture. The grain is straight but may contain parallel runs resembling ribbons. Color is generally reddish brown but may sometimes be lighter with a pale red to grayish tinge.
hardwoods, with their smooth texture and fine grain, offer an ideal surface for stained or painted finishes. Poplar is yellow in color with occasional streaks of gray and green.
Paintable Paintable Species.
Mixed Species.
Some species with fine textured grain such as Poplar, Birch or Maple make an excellent choice for a painted door.
Combine species for a custom look that's uniquely your own. Sample shown combines Birch panels with Cherry stiles and rails.
Other species available on a custom basis. TM
42
Mixed
Flush doors also available. Any size, any species.
( 888.330.ARCH (2724)
10 different species available in more than 470 designs for panel or glass doors.
Contact your sales representative for stile and rail designs and panel details.
TM
sales@arch-mill.com
43
Domes Light Cove
Rope Light Ceiling
Plaster Adhesive
Dome Light Cove
Ceiling
Plain Dome Rim
Custom Domes
s
diu
Ra
Radius
Custom Dome Plan View Hanger Specify Rise
Specify Diameter
Section of Dome
TM
44
( 888.330.ARCH (2724)
DM351
Outside Dia: 483⁄8" • Inside Dia: 389⁄16" • Depth: 51⁄8"
DM352
Outside Dia: 487⁄16" • Inside Dia: 421⁄2" • Depth: 77⁄8"
DM353
Outside Dia: 471⁄4" • Inside Dia: 393⁄8" • Depth: 515⁄16"
DM355 DM354
Outside Dia: 3915⁄16" • Inside Dia: 363⁄16" • Depth: 715⁄16" Outside Dia: 279⁄16" • Inside Dia: 253⁄8" • Depth: 47⁄16"
DM356 DM357
Outside Dia. 65" • Inside Dia. 59" • Depth 121⁄2" Outside Dia. 98" • Inside Dia. 92" • Depth 155⁄8"
TM
sales@arch-mill.com
45
Ceilings: Vaulted and Coffered
Custom prefabricated steel framing system
Barrel Vault
Groin Vault
Vaulted or coffered ceilings can be designed and factory fabricated to your specifications. These specialty ceilings can be constructed with a custom prefabricated steel framing system or molded in fiberglass or gypsum. Our sales team can assist in all your custom requirements.
TM
46
( 888.330.ARCH (2724)
Polyurethane Corbels B4410
B4411
103⁄8" H x 7" W x 31⁄4" D
B4414
B4412
107⁄8" H x 7" W x 33⁄8" D
B4416
121⁄4" H x 51⁄2" W x 5" D
121⁄2" H x 51⁄4" W x 41⁄2" D
93⁄4" H x 43⁄4" W x 53⁄4" D
123⁄8" H x 77⁄8" W x 45⁄8" D
B4463
271⁄2" H x 83⁄4" W x 91⁄8" D
B4496
83⁄4" H x 71⁄2" W x 35⁄8" D
B4712
111⁄8" H x 71⁄2" W x 51⁄8" D
B4428
153⁄4" H x 97⁄8" W x 4" D
B4489
B4413
6" H x 41⁄8" W x 27⁄8" D
B4710
105⁄8" H x 61⁄8" W x 21⁄8" D
B4773
71⁄4" H x 31⁄8" W x 6" D Shown with B4413 TM
sales@arch-mill.com
47
Medallions M3179
M3181
18" Diameter
M3182
18" Diameter
18" Diameter
M3189
M3191
19" Diameter
19" Diameter Shown with M3376
M3210
M3209
21" Diameter
M3235
21" Diameter – Opening: 13"
231â „2" Diameter
TM
48
( 888.330.ARCH (2724)
M3256
M3252
M3236
251⁄4" Diameter
251⁄4" x 171⁄2"
231⁄2" Diameter
M3268
M3283
263⁄4" x 171⁄4"
281⁄4" Diameter Shown with M3299
M3299
M3323
30" Diameter
M3376
321⁄4" Diameter
371⁄2" Diameter
TM
sales@arch-mill.com
49
Niches and Rosettes Niches
13⁄8"
⁄8"
5
N6445
23⁄4"
N6452
21⁄2"
10"
41"
281⁄2"
7"
41⁄4"
11⁄8" 2 ⁄4 " 3
13⁄8"
7"
1 11⁄8" 5 ⁄2"
7"
Height: 45"
Height: 515⁄8"
Top Width: 211⁄2"
Top Width: 181⁄2"
Bottom Width: 271⁄4"
Bottom Width: 25"
Rosettes M5441
D5426
Width/Height: 4"
Width/Height: 25⁄8"
D5416
Width/Height: 15⁄8" Shown with Arch Mill mouldings
D5425
D5439
D5440
D5445
Width/Height: 23⁄8"
Width/Height: 33⁄4"
Width/Height: 35⁄8"
Width: 6" Height: 41⁄2"
TM
50
( 888.330.ARCH (2724)
Fireplaces Mt. Vernon
Charleston
Contact your sales representative regarding more styles and ordering specifications. Available in more than 30 different designs in 35 standard finishes. Each kit customized to your requirements.
Victorian
sales@arch-mill.com
TM
Harrisburg
51
Polyurethane Decor Items D5446
D5459
Width: 41⁄8" Height: 31⁄8"
M5479
M5463
Width: 53⁄4" Height: 45⁄8"
Width/Height: 6"
D5483
Width: 75⁄8" Height: 53⁄4"
D5493
Width: 8" Height: 55⁄8"
Width: 9" Height: 51⁄4"
D5498.2
Width: 81⁄2" • Height: 3" 2 pieces: Available as two piece set only.
Shown with Arch Mill mouldings
D5412.2
Width: 12" • Height: 51⁄8" • 2 pieces
D5437
Width: 361⁄4" • Height: 73⁄8" • 2 pieces
D5413.2
Width: 121⁄2" • Height: 41⁄2" • 2 pieces
D5424
Width: 24" • Height: 6" • 2 pieces
TM
52
( 888.330.ARCH (2724)
Columns, Pergolas and Porticos
Pergolas and porticos can be designed and fabricated to your specifications in wood or quality exterior composite materials. Our sales team can assist in all your custom requirements.
TM
sales@arch-mill.com
53
Columns and Porticos
Empire
Greek Erectheum
Greek Angular Ionic
Roman Corinthian
Modern Composite
Tuscan
Scamozzi
Roman Ionic
Temple of Winds
TM
54
( 888.330.ARCH (2724)
Round Tapered Fiberglass Columns with Engineered Cap & Base Part Number
Size
Shaft
AC0608P
6" x 8'
Plain
AC0856P
8" x 5'6"
Plain
AC0808P
8" x 8'
Plain
AC0808F
8" x 8'
Fluted
AC0808S
8" x 8'
Split-D
AC0809P
8" x 9'
Plain
AC0810P
8" x 10'
Plain
AC0810F
8" x 10'
Fluted
AC0810S
8" x 10'
Split-D
AC1008P
10" x 8'
Plain
AC1008F
10" x 8'
Fluted
AC1009P
10" x 9'
Plain
AC1010P
10" x 10'
Plain
AC1010F
10" x 10'
Fluted
AC1012P
10" x 12'
Plain
AC1208P
12" x 8'
Plain
AC1210P
12" x 10'
Plain
AC1212P
12" x 12'
Plain
Tuscan Cap & Base
Attic Base
Square Fiberglass Columns with Polyurethane Cap & Base Part Number
Size
Shaft
AC0808Q
8" x 8'
Plain
AC0810Q
8" x 10'
Plain
AC1008Q
10" x 8'
Plain
AC1010Q
10" x 10'
Plain
Doric Cap & Base
Round Tapered Wood Columns with Cap and Base Part Number
Size
Shaft
AC0608W
6" x 8'
Plain
AC0808W
8" x 8'
Plain
AC1008W
10" x 8'
Plain
AC1208W
12" x 8'
Plain
Columns can be special ordered in any style, any size, any material. Plan types for split columns.
A
B
C
D
Q
W
E
F
G
H
K
L
TM
sales@arch-mill.com
55
Exterior Doors and Hardware Hardware
A250
Mahogany Doors and Sidelights Finish: Sequoia • Glass: C (clear beveled, ripple, clear water) • Caming: Brass Tuscany Silver Patina
Arts & Crafts Oil Rubbed Bronze
A201
Denver Dark Bronze
Greeley Medium Bronze
Oak Doors and Sidelights Finish: Honey • Glass: Q (clear beveled, reed, glue chip, coswald/rain) • Caming: Brass
TM
56
( 888.330.ARCH (2724)
HHardware A225
Oak Panel Door and Sidelight Finish: Cashmere • Glass: R (clear beveled, clear baroque, glue chip) • Caming: Brass
A1202
Knotty Alder Radius-Top Panel Door Finish: Cashmere, shown with optional Speakeasy and Bordeaux Grille in Dark Patina
Marietta Pewter
Melrose Satin Nickel
Orleans Satin Nickel
Saratoga PVD-Lifetime
A412
Mahogany Panel Door with Optional Carving and Sidelights Finish: Sequoia • Glass: H (clear beveled, clear baroque) • Caming: Brass
TM
sales@arch-mill.com
57
Exterior Doors and Hardware Hardware
A110
Oak Door and Sidelights Finish: Cashmere • Glass: T (clear beveled, glue chip, gotta) • Caming: Polished Zinc Remington Silver Patina
Ribbon & Reed Pewter
A252
Valley Forge French Antique
Knoxville Oil Rubbed Bronze
Mahogany Doors and Sidelights Finish: Sequoia • Glass: A (clear beveled, coswald/rain) • Caming: Polished Zinc
TM
58
( 888.330.ARCH (2724)
Custom Entries
Entry systems can be custom designed, fabricated, glazed and finished to your specifications in any wood species suitable for exterior use. You design, we create.
TM
sales@arch-mill.com
59
Exterior Doors - Wood and Fiberglass
2 1
4
3
6
5
7 TM
60
( 888.330.ARCH (2724)
8
10
9
11
12
13
TM
sales@arch-mill.com
61
Exterior Trim: Pediments, Crossheads & Sunbursts 6" Small Crosshead
ENTRANCE COMPONENT MEASUREMENTS 10" Large Crosshead
10" Crosshead w/Keystone
18" Capital Crosshead
Broken Bonnet Pediment
COMBINATION PEDIMENT
All crosshead and pediments available in incremental sizes, specify your requirements. Plain Sunburst Pediment
Peak Pediment
18" Swelled Crosshead
Triglyph Crosshead
Ramshead Pediment
Sunburst Pediment
Shown with Arch Mill exterior components
Acorn Pediment
62
TM
( 888.330.ARCH (2724)
Proper adhesives and sealants must be used with all exterior components. See page 81.
A11-303
Height: 9" • Projection: 4" • Widths Available: 24" thru 204"
A11-303-3
Shown with A11-310-3 Height: 9" • Projection: 4" • Widths Available: 24" thru 204"
A11-316 A11-310
Height: varies • Projection: 2" • Widths Available: 24" thru 108" Height: 6" • Projection: 3" • Widths Available: 24" thru 200"
A11-310-3
Height: 6" • Projection: 3" • Widths Available: 24" thru 200"
A11-319
Height: varies • Projection: 2" Widths Available: 24" thru 144"
TM
sales@arch-mill.com
63
Exterior Trim: Pilasters and Louvers Proper adhesives and sealants must be used with all exterior components. See page 81.
FLUTED Width
Height
Projection
5" 5"
Item Number
90" 120"
7
2 ⁄8" 27⁄8"
A31-260-5-90 A31-260-5-120*
6" 6"
90" 120"
27⁄8" 27⁄8"
A31-260-6-90 A31-260-6-120*
7" 7"
90" 144"
7
2 ⁄8" 27⁄8"
A31-260-7-90 A31-260-7-144*
8" 8"
90" 144"
27⁄8" 27⁄8"
A31-260-8-90 A31-260-8-144*
9" 9"
90" 144"
27⁄8" 27⁄8"
A31-260-9-90 A31-260-9-144*
10" 10"
90" 144"
27⁄8" 27⁄8"
A31-260-10-90 A31-260-10-144*
DOUBLE PANEL Width
Height
Projection
7"
90"
2 ⁄8"
A31-261-7-90
8"
90"
27⁄8"
A31-261-8-90
9"
102"
27⁄8"
A31-261-9-102
10"
108"
27⁄8"
A31-261-10-108
27⁄8"
11⁄8"
OUTSIDE
INSIDE
⁄4"
7" 8" 9" 10"
51⁄4" 6" 63⁄4" 71⁄2"
3
All Pilasters with an (*) have an adjustable plinth block. INSIDE OUTSIDE 1 ⁄8" 1
27⁄8"
⁄4"
3
INSIDE OUTSIDE
OUTSIDE
INSIDE
5" 6" 7" 8" 9" 10"
33⁄4" 41⁄2" 51⁄4" 6" 63⁄4" 71⁄2"
14"
Profile
A40-240
Item Number
7
Pilasters are also offered in single panel and plain. Additional sizes available.
14"
Profile
A40-160
Closed or Open with Screen Diameter: 18" • 22" • 24" • 30" • 36"
Closed or Open with Screen Diameter: 24" • 30" • 32" • 36"
Louvers are available in any shape, size and configuration.
TM
64
( 888.330.ARCH (2724)
Exterior Trim: Brackets and Dentils A50-100
A50-102
Height: 8" • Width: 47⁄8" Projection: 8"
A50-120
A50-202
Height: 16" • Width: 41⁄2" Projection: 101⁄2"
Height: 12" • Width: 1" Projection: 10"
A50-301-1 A50-301-2 A50-301-3
A50-236
Height: 3 ⁄8" • Width: 4 ⁄8" Projection: 9" 7
Height: 10" • Width: 31⁄2" Projection: 51⁄4"
3
Height: 31⁄2", 41⁄4", 53⁄4" Width: 51⁄8", 5", 57⁄8" Projection: 73⁄4", 73⁄4", 91⁄2" Pitch brackets available.
A50-108
A50-115
Height: 6" • Width: 71⁄2" Projection: 131⁄4"
A50-205
Height: 153⁄4" • Width: 4" Projection: 14"
A50-300
Height: 16" • Width: 2" Projection: 16"
A50-302-1 A50-302-2 A50-302-3
Height: 15" • Width: 81⁄4" Projection: 77⁄8"
A50-304
Height: 31⁄2", 51⁄2", 47⁄8" Width: 51⁄8", 5", 57⁄8" Projection: 73⁄4", 8", 8"
Height: 6" • Width: 9" Projection: 15"
(Top cove matches A01-250-8)
A50-307
Height: 6" • Width: 43⁄4" Projection: 5" Pitch brackets available.
A50-308
Height: 61⁄2" • Width: 43⁄4" Projection: 51⁄2"
A50-310
Height: 53⁄8" • Width: 43⁄8" Projection: 67⁄8"
TM
sales@arch-mill.com
Shown with A50-301-1
65
Exterior Mouldings: Polyurethane Dentil Trim A01-131-7-16 A01-131-9-16 A01-131-11-16
A01-122-16
Height: 7" • Length: 16' • Projection: 11⁄2" Height: 91⁄2" • Length: 16' • Projection: 11⁄2" Height: 111⁄2" • Length: 16' • Projection: 11⁄2"
Height: 61⁄2" • Length: 16' • Projection: 33⁄8"
A01-167-8
A01-126-16
Height: 33⁄8" • Length: 8' • Projection: 13⁄8" Also available in 6, 8, 9, 10 and 12/12 pitch.
Height: 41⁄2" • Length: 16' • Projection: 11⁄8" Also available in 5, 6, 7, 8, 9, 10 and 12/12 pitch.
A01-245-8 A01-128-16
Height: 31⁄2" • Length: 8' • Projection: 7⁄8" Height: 5 ⁄4" • Length: 16' • Projection: 2 ⁄2" 1
1
A01-264-16 A01-130-16
Height: 51⁄4" • Length: 16' • Projection: 4" Height: 6" • Length: 16" • Projection: 11⁄2" Also available in 5, 6, 7, 8, 9, 10 and 12/12 pitch.
TM
66
( 888.330.ARCH (2724)
Proper adhesives and sealants must be used with mouldings. See page 81.
Crowns & Mantles A01-155-16
A01-118-16
Height: 61⁄2" • Length: 16' • Projection: 41⁄2"
Height: 11" • Length: 16' • Projection: 61⁄2"
A01-119-16
A01-158-16
Height: 41⁄4" • Length: 16' • Projection: 4"
A01-149-16
Height: 123⁄4" • Length: 16' • Projection: 31⁄2"
A01-206-16
Height: 3" • Length: 16' • Projection: 21⁄4"
Height: 12" • Length: 16' • Projection: 41⁄2"
A01-154-16
A01-215-16
Height: 73⁄4" • Length: 16' • Projection: 53⁄4"
Height: 4" • Length: 16' • Projection: 37⁄8"
TM
sales@arch-mill.com
67
Exterior Mouldings: Polyurethane A01-216-16
A01-218-16
Height: 71⁄2" • Length: 16' • Projection: 31⁄2"
Height: 8" • Length: 16' • Projection: 7"
Casings A01-110-2-16
A01-133-2-16
Height: 51⁄2" • Length: 16' • Projection: 2"
Height: 5" • Length: 16' • Projection: 11⁄8"
A01-135-16
A01-133-16
Height: 51⁄2" • Length: 16' • Projection: 15⁄8"
Height: 51⁄2" • Length: 16' • Projection: 13⁄4"
A01-136-2-16
Height: 31⁄2" • Length: 16' • Projection: 13⁄4"
Shown with Arch Mill exterior components TM
68
( 888.330.ARCH (2724)
Proper adhesives and sealants must be used with mouldings. See page 81.
A01-192-16
A01-194-16
Height: 31⁄2" • Length: 16' • Projection: 11⁄8"
Height: 51⁄4" • Length: 16' • Projection: 1"
Accessory Trim A01-201-16
A01-101-8 A01-101-1-8 A01-101-5-8
Height: 23⁄8" • Length: 16' • Projection: 11⁄2"
Height: 1⁄2" • Length: 8' • Projection: 1⁄2" Height: 11⁄16" • Length: 8' • Projection: 11⁄16" Height: 11⁄16" • Length: 8' • Projection: 5⁄8"
A01-205-8
A01-102-16
Height: 3⁄4" • Length: 8' • Projection: 3⁄4" Height: 13⁄4" • Length: 16' • Projection: 1"
Matches trim for 50-301
A01-277-16 A01-151-01-16 A01-151-02-16 A01-151-03-16
Height: 13⁄16" • Length: 16' • Projection: 11⁄16" Height: 17⁄8" • Length: 16' • Projection: 13⁄8" Height: 21⁄8" • Length: 16' • Projection: 13⁄4"
Height: 11⁄2" • Length: 16' • Projection: 4"
TM
sales@arch-mill.com
69
Balustrade Systems: PVC 1000 Series
3000 Series
2000 Series
Shown with optional post light.
Contact your sales representative with your layout or requirements.
TM
70
( 888.330.ARCH (2724)
Curved Rail Sections available in standard 4' or custom radius.
7000 Series
TM
sales@arch-mill.com
71
Balustrade Systems: Polyurethane 71⁄4" Series TOP & BOTTOM RAILS
NEWEL POSTS & CAPS
Available in 4', 5', 6', 8', 10' & 12' Lengths
Step 1: Choose the number of newel posts.
Top Rails
71⁄4"
Newel Post Installation Kits 24-125 For Newel Posts 22-125, 22-142, 22-144, 22-145
8"
21-300-4 21-300-5 21-300-6 21-300-8 21-300-10 21-300-12
10" 5 ⁄2" 1
10"
10"
53⁄4"
10"
22-125 • 10"SQ. x 48"H
53⁄4"
Bottom Rails 21-350-4 21-350-5 21-350-6 21-350-8 21-350-10 21-350-12
51⁄2"
10" Newel with routed edge
10" Panel Newel
22-142 Straight Newel 10"SQ. x 48"H 10"
10"
71⁄4"
22-144 Corner Newel 10”SQ x 48”H.
RAIL SUPPORT BLOCKS
10"
On spans of more than 4 feet, we recommend installing support blocks.
10"
H 4" x W 7" x L 8" Use with railings 21-300 & 21-350
22-145 3 Panel Newel 10”SQ. x 48”H
26-350 Support Block
Rail Installation Kit Rail Kit: 25-300 For rails 21-300 & 21-350
Step 2: Choose a newel cap for each newel post selected.
Curved Railings
23-125 11" SQ.
23-225 103⁄8" SQ.
23-325 103⁄8" SQ.
Rails can be fabricated for any radius. Specify your requirements.
23-425 113⁄8" SQ.
Step 3: Balls, acorns, pineapples & urns may be added to the top of a 23-125 and 23-425 newel cap. See page 75.
TM
72
( 888.330.ARCH (2724)
A20-160
A20-180
A20-190
A20-210
Width: 43⁄8"
Width: 41⁄2"
Width: 51⁄4"
Width: 47⁄8"
Height: 27" 33"
Height: 16" 25"
Height: 19" 22" • 27" • 35"
Height: 31" 36" • 37" • 40"
Spacing: 57⁄8"
Spacing: 51⁄4"
Spacing: 63⁄4"
Spacing: 61⁄2"
A20-395
Width: 41⁄2" Height: 18" Spacing: 61⁄2"
Shown with 71⁄4" Series with A20-190-22 baluster
A20-220
A20-270
A20-280
A20-360
Width: 51⁄4"
Width: 51⁄4"
Width: 5"
Width: 5"
Height: 31" 34"
Height: 24 ⁄2" 301⁄2"
Height: 28" 34"
Height: 24"
Spacing: 63⁄4"
Spacing: 63⁄4"
Spacing: 61⁄4"
Spacing: 71⁄4"
1
TM
sales@arch-mill.com
73
Balustrade Systems: Polyurethane 12" Series TOP & BOTTOM RAILS • 12" Available in 4', 5', 6', 8', 10' & 12' Lengths Top Rails
12"
21-400-4 21-400-5 21-400-6 21-400-8 21-400-10 21-400-12
6"
9"
Bottom Rails 21-450-4 21-450-5 21-450-6 21-450-8 21-450-10 21-450-12
9"
51⁄2"
12"
Shown with 12" Series with A20-150-24 baluster
RAIL SUPPORT BLOCKS • 12" On spans of more than 4 feet, we recommend installing support blocks.
26-450 Support Block
H 4" x W 12" x L 12" Use with railings 21-400 & 21-450
RAIL INSTALLATION KIT • 12" Rail Kit: 25-400 For rails 21-400 & 21-450
Our sales team can assist in laying out your rail system and providing a list of required components. Shown with 12" Series with A20-200-28
TM
74
( 888.330.ARCH (2724)
A20-130
A20-140
A20-150
Width: 7"
Width: 71⁄4"
Width: 51⁄2"
Height: 38"
Height: 36"
Height: 241⁄2" 36"
Spacing: 81⁄16"
Spacing: 73⁄8"
Spacing: 61⁄4"
A20-200
A20-275
A20-340
Width: 71⁄2"
Width: 7"
Width: 7"
Height: 28" 35"
Height: 20"
Height: 30"
Spacing: 8"
Spacing: 75⁄8"
Spacing: 7"
NEWEL POSTS & CAPS • 12" Step 1: Choose the number of newel posts.
Step 2: Choose a newel cap for each newel post selected.
123⁄4" Panel Newel
Newel Post Installation Kits 24-130 For Newel Posts 22-132 and 22-134
123⁄4"
123⁄4"
123⁄4"
10"
23-130 13 3/4” SQ.
10"
123⁄4"
23-330 13 3/4” SQ. 22-132 Straight Newel 12 3/4”SQ. x 48”H
22-134 Corner Newel 12 3/4”SQ. x 48”H
22-142 Straight Newel 10"SQ. x 48"H
23-230 13 3/4” SQ.
10"
Step 3: The following items may be added to the top of a 23-125, 23-425 or 23-130 newel cap.
10"
22-144 Corner Newel 10”SQ x 48”H. 10"
Item No. Base D. Height 93⁄4" 5" 55-100 131⁄4" 10" 55-130
Item No. Base D. Height 93⁄4" 54-100 41⁄2" 6" 113⁄4" 54-110
Item No. Base D. Height 57-100 41⁄4" 10" 57-130 8" 201⁄2”
Item No. Base D. Height 56-100 5" 11" 56-110 61⁄2” 14"
TM
sales@arch-mill.com
10"
22-145 3 Panel Newel 10”SQ. x 48”H
75
Exterior Trim: PVC Mouldings & Trimboards A9091
A9079
13⁄16" x 41⁄2"
PVC Trimboards
1" x 2"
A9093
A9081
11⁄4" x 2"
⁄16" x 35⁄8"
9
Stock #
A9095
A9083
Dimensions
A580418
5
A580618
5
A580818
5
⁄8" x 31⁄2" x 18' ⁄8" x 51⁄2" x 18' ⁄8" x 71⁄4" x 18'
A581018 11
⁄16" x 45⁄8"
A9085
⁄16" x 19⁄16"
A9097
1 ⁄4" x 1 ⁄8" 1
9
3
A9087
11
⁄16" x 1 ⁄8" 1
A9099
⁄8" x 91⁄4" x 18'
5
A581218
5
A340418
3
A340618
3
A340818
3
A341018
3
⁄4" x 31⁄2" x 18' ⁄4" x 51⁄2" x 18' ⁄4" x 71⁄4" x 18' ⁄4" x 91⁄4" x 18'
A341218
3
⁄4" x 111⁄4" x 18'
A341618
3
⁄4" x 151⁄4" x 18'
A540418
1" x 31⁄2" x 18'
A540618
1" x 51⁄2" x 18'
A540818
1" x 71⁄4" x 18'
A541018
1" x 91⁄4" x 18'
A541218
1" x 111⁄4" x 18'
A541618
1" x 151⁄4" x 18'
A384808
3
A384810 11
⁄16" x 15⁄8"
A9089
⁄8" x 515⁄32"
3
76
3
⁄4" x 3⁄4"
PVC Beadboard is also available in 4' x 8' sheets.
⁄8" x 111⁄4" x 18'
⁄8" x 4' x 8'
⁄8" x 4' x 10'
3
A124808
1
⁄2" x 4' x 8'
A584808
5
⁄8" x 4' x 8'
A344808
3
⁄4" x 4' x 8'
A344810
3
⁄4" x 4' x 10'
A344818
3
⁄4" x 4' x 18'
A544808
1" x 4' x 8'
A544810
1" x 4' x 10'
TM
( 888.330.ARCH (2724)
Proper adhesives and sealants must be used with all exterior components. See page 81. Sheathing
Window Trim Kits All window trim kits are comprised of 5/4" x 4" casing and standard 2" sill. Contact a sales representative for a complete selection of pediment profiles.
WT100
Space Center Clips Equally Clips Start 11⁄2" From Ends
13⁄16
2
2
Insert Clip 4" From Top
Space Center Clips Equally
2
2
Clip Detail
2
Insert Clip Top of Sill
WT200 41⁄2
2 2
WT300 31⁄2
1
2 15⁄8
41⁄2
11⁄16 41⁄2
1 ⁄4 3
1 ⁄4 3
21⁄2
31⁄2
31⁄2
31⁄2
31⁄2
113⁄16 23⁄4
11⁄16 21⁄2
19⁄16
31⁄2
2
2
2
2
23⁄4
2
2
Custom Shop
Window trim kits can be fabricated for any window in any profile. Specify your requirements. TM
sales@arch-mill.com
77
Custom Exterior ~ Historical Reproductions
TM
78
( 888.330.ARCH (2724)
Whether it be new construction or a historical reproduction, residential, commercial or retail, the designs are limitless. Our sales team can assist in all your custom requirements.
TM
sales@arch-mill.com
79
Shutters
Louver
Flat Panel
• Standard sizes available: 9" thru 24" wide, 30" thru 80" high. • Available in: PVC, Polyurethane, Wood and Exterior Composite. • Offered in: 40 standard colors or primed or unfinished. • Storm rated shutters are compliant with the IBC National Hurricane code. • Historically correct operable hardware also available.
Louver with Tilt Rod
Board & Batten
Raised Panel
Framed Board & Batten
Custom Design Available
TM
80
( 888.330.ARCH (2724)
Ordering & Technical Information 1.
ORDER POLICIES 1.01 Shipping time on stock Arch Mill Specialties products will be within 5 working days from date of approved order, unless otherwise specified on your order.
3.
WARRANTY Arch Mill Specialties warrants its products against all defects in material and/or workmanship to the original purchaser for a period of one year from date of purchase. The warranty is subject to governing terms and conditions which are available upon request.
4.
ADHESIVES (IMPORTANT NOTICE) PL Polyurethane premium construction adhesives must be used on all of our polyurethane moulding products to insure proper installation and prevent seam separation.
5.
PRODUCT INSTALLATION AND STORAGE INSTRUCTIONS Available upon request.
6.
FREE SAMPLE POLICY Reasonable sample lengths of certain items are available upon request for testing their suitability for your use or application. For information on this please discuss with our sales representatives.
7.
PRICING All pricing is subject to change without prior notice.
8.
FINISHING INSTRUCTIONS Available upon request.
9.
CUSTOM OR SPECIALTY WORK Custom or specialty work is available upon request. All custom work is quoted individually. Please contact customer services for details. Note: No returns or cancellations can be made on custom ordered products.
1.02 For all large orders delivery time will be given by your sales representative. 1.03 Arch Mill Specialties has a $100.00 standard minimum invoice amount. No invoices will be issued for less than $100.00 net. 1.04 Cancellation of stock Arch Mill Specialties product orders is permitted within a 24 hour time frame from placed order. A 20% fee will be charged to customers for any orders cancelled after 24 hours. 1.05 Any product that is being returned must be approved and given a returned goods authorized number (RGA) by a certified salesperson. Restocking charges will apply. 1.06 Any returns are to be shipped pre-paid by the customer. 1.07 No product can be returned after 90 days from the date of original invoice. 1.08 Please inspect all product immediately upon receiving order. Any damage is to be noted on carrier's waybill, and customer is to file claim with the carrier. It is the customer's responsibility to retain merchandise and packaging for inspection by carrier. 1.09 All stock goods for return must be in "as shipped" condition. Authorization for pick-up is not a guarantee of credit. All returned goods are subject to warehouse inspection, before credit will be issued. 1.10 A copy of Arch Mill Specialties terms and conditions of sale that govern all orders are available upon request. 2.
FREIGHT AND SHIPPING CHARGES All freight cost is FOB manufacturer or an Arch Mill Specialties distribution center and will be estimated at time of order.
10. FLEXIBLE MOULDINGS Many of Arch Mill Moulding products can be produced in a flexible polyurethane for use in curved wall or wrapping applications. Please call customer service for details or for more information and pricing. 11.
PRODUCT PHYSICAL PROPERTIES Available upon request.
Adhesives, Sealants, & Cleaners AMB
BFC
BFS
BFF BFP
PLP
Premium Construction Adhesive PL Premium is a polyurethane adhesive that is three times stronger than traditional construction adhesives. It is suitable for interior or exterior applications.
sales@arch-mill.com
Mitrebond Mitrebond is a fast bonding adhesive that is ideal for difficult angles or tight corners. It bonds in 10 seconds and requires no nailing or clamping.
PVC Cleaner - Bond & Fill PVC Cleaner is guaranteed for all your exterior needs. It works effectively on PVC, vinyl and glass.
Flex Adhesive/ Sealant Bond & Fill Flexible Adhesive/Sealant is formulated for PVC expansion and contraction joints, is easy-touse, non-yellowing, and has high UV resistance.
Structural Adhesive/ Sealant - Bond & Fill Structural Adhesive/ Sealant bonds, fills and repairs all PVC trim, vinyl and aluminum. It will not shrink when dry and has extreme durability and adhesion. TM
Painters Adhesive/ Sealant Bond & Fill Painters Adhesive/Sealant is developed as a nail hole and gap filler for all PVC products. It fully cures within 24 hours, is sandable and paintable and requires no primer.
81
TM
(
1.888.330.ARCH (2724) New York • New Jersey • Connecticut
$10.00
Fax: 888.330.2725 • Email: sales@arch-mill.com
©Arch Mill Specialties 2007