ARC Product Catalogue 2013

R

EXTRAORDINARY LENGTHS™

NatioNal Product catalogue

WELCOME TO ARC

ARC is Australia’s first and leading manufacturer and supplier of steel reinforcing and fencing products.

Established in 1920 as the Australian Reinforced Concrete Engineering Company Pty Ltd, ARC was the first to produce fabricated mesh for the Australian market.

With over 35 locations including 5 main manufacturing sites, ARC is well equipped to supply and service projects of all sizes, from bridges to pool and garden fencing, skyscrapers to schools, and industrial Cyclone fencing.

OUR PRODUCT CATALOGUE This catalogue features information on a selected range of ARC products. You can also find our products and catalogue on our website www.arcreo.com.au Should you require further information or details of our wider range, don’t hesitate to speak with one of our friendly staff.

This publication should be used a guide only.

Published Feb 2013.

Product Availability Products contained within this catalogue may not be stocked at all locations. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found in this catalogue. Please confirm the availability of the products you require, prior to placement of your order.

QUALITY We are extraordinarily proud of our products and their quality.

All ARC reinforcing bar and mesh is ACRS accredited and tested in NATA registered laboratory.

We hope you find our catalogue valuable in assisting you with your next project.

131 557 arcreo.com.au

1

COnTEnTs

2

EnvIROnMEnTAL sUsTAInAbILITY

5

sTAnDARD REInfORCEMEnT

6

Square Mesh

6

Rectangular Mesh

7

Trench Mesh

7

Deformed Bar

8

Swimming Pool Reinforcing Bar

8

Round Bar

9

Ligatures

10

Starter Bars

11

Corner Bars

11

Z Footing Cages

12

WZ Footing Cages

12

Ribwire Spirals

13

bUILDInG ACCEssORIEs

15

Plastic Clipfast Spacers

15

Plastic Deck Chairs

17

Plastic Fastwheel

18

Plastic Slab on Ground Spacers

19

Plastic Tipped Wire Chairs

20

Metal Bases

21

Wire Trench Mesh Clips

21

Plastic Trench Mesh Supports

22

Plastic Continuous Bar Chairs

22

Concrete Block Spacers

23

Bar Guards

24

REOSOK速

24

Bondek速 & Accessories

25

Stramit Condek HP速 & Accessories

25

131 557 arcreo.com.au

COnTEnTs

Crack-A-Joint®

26

Crack Inducer on Ground

26

Dowel Bars Black

27

Dowel Bars – Hot Dipped Galvanised

27

Dowel Serts

27

Dowel Expansion Caps

28

Dowel Sleeves Universal

28

Dowel Speed Sleeves

29

Square Dowels Bars Black

29

Square Dowels Bars – Hot Dipped Galvanised

30

Dowelmaster®

30

Dowel Covers Square Metal

31

Diamond® Dowels & Sleeves

31

Biscuit Dowels

32

Dowel Plate Cradles - Danley

33

Dowel Plate Cradles - Connolly

33

Flexible Expansion Jointing

34

Stiff Expansion Jointing

35

Formwork Products – PecaformTM

35

Expansion Joints

35

Key Joints & Accessories - Connolly

36

Key Joints & Accessories - Danley

37

Galintel® Solid Base Angle – Hot Dipped Galvanised

38

Galintel® Rendabar Angle – Hot Dipped Galvanised

39

Galintel® Multi-Rib T Bar – Hot Dipped Galvanised

39

Polythene Building Film

40

Polystyrene Void Formers

41

Pod Spacers

41

BT Couplers

42

Lenton® Couplers

43

MBT ET Couplers

43

Reid Construction Systems

44

131 557 arcreo.com.au

3

COnTEnTs

bUILDInG ACCEssORIEs

4

(COnTInUED)

Shear Load Connectors

45

Tie Wire

46

Loop Ties

46

Reel Belt & Tools

47

WELDMEsH

48

Easysheets

48

Weldmesh

49

RURAL PRODUCTs

50

Sheepyard Mesh Sheets

50

Sheepyard Mesh Rolls

50

Field Gate Infills

50

REsIDEnTIAL fEnCInG

51

Wire Fencing

51

Tubular Aluminium Fencing

52

Tubular Steel Fencing

53

InDUsTRIAL fEnCInG

54

Chainwire Fencing

55

Edge Protection Fencing

58

Fencing Accessories

60

COnDITIOns Of sALE

61

ARC LOCATIOns

73

131 557 arcreo.com.au

EnvironmEntal SuStainability

The Australian Reinforcing Company (ARC) is committed to pursuing a high standard of environmental management throughout all its operations. ARC strives for continual improvement of environmental performance, the efficient use of resources, and the minimisation or prevention of pollution.

ARC uses a high proportion of recycled steel in the manufacturing of it’s reinforcing mesh and bar products.

ARC AnD THE GREEn sTAR sCHEME Green Star is a scheme developed by the Green Building Council of Australia (GBCA) with the purpose of recognising and rewarding environmental leadership within the building industry. Under the scheme, rating tools award points and credits within 9 distinct categories, one of which relates to building materials.

The credit which relates directly to steel is MAT-6 within the Office Design tool and MAT-5 in the other base building rating tools. More information can be found on the GBCA website www.gbca.org.au The great news is that ARC’s reinforcing products can contribute towards your project achieving its Green Star rating.

• • • • •

Steel-making facilities have ISO14001 Environmental Management System (EMS) in place Members of World Steel Association’s Climate Action Programme Steel-making facilities that utilise Polymer Injection Technology to reduce energy consumption 500Mpa Reinforcing steel, compliant with AS/NZS 4671 and ACRS approved.

Use of off-site optimal fabrication techniques

For more information ask your local ARC sales representative or visit the ARC website at www.arcreo.com.au

131 557 arcreo.com.au

5

sTAnDARD REInfORCEMEnT

sQUARE MEsH

Full size sheets Product Code

Long Wire (mm)

Cross Wire (mm)

Approx Mass /sht (kg)

Pack size

SL81

7.60 @ 100

7.60 @ 100

105

20

SL62

6.00 @ 200

6.00 @ 200

33

50

SL72

6.75 @ 200

6.75 @ 200

40

40

SL82

7.60 @ 200

7.60 @ 200

52

30

SL92

8.55 @ 200

8.55 @ 200

65

20

SL102

9.50 @ 200

9.50 @ 200

80

20

Ribbed wire reinforcing mesh in standard 6.0m x 2.4m sheets. Complies with AS/NZS 4671.

TM

4B2 Mesh

tM

Product Code

Long Wire (mm)

Cross Wire (mm)

Approx Mass /sht (kg)

Pack size

SL62-4B2

6.00 @ 200

6.00 @ 200

18

40

SL72-4B2

6.75 @ 200

6.75 @ 200

23

40

SL82-4B2

7.60 @ 200

7.60 @ 200

30

40

Standard square mesh in a convenient 4.0m x 2.0m sheet size. Complies with AS/NZS 4671.

TIP

TIP

To estimate the number of full size (6m x 2.4m) sheets of mesh required to cover a known area.

To estimate the number of trench mesh sheets required to fill a known length of beam.

Divide the area in square metres (m2) by 12.4 and then round up to the next whole number.*

Divide the length of the beam in linear metres (m) by 5.4 then round up to the next whole number. Then multiply by the number of layers.

For example: for an area of 160m2 160 / 12.4 = 12.9 So you need 13 sheets of mesh. *based on standard laps of 2 outermost edge wires.

6

For example: for a 24m beam 24 / 5.4 = 4.4 So you need 5 sheets of trench mesh per layer.

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

sTAnDARD REInfORCEMEnT

RECTAnGULAR MEsH

Product Code

Long Wire (mm)

Cross Wire (mm)

Approx Mass /sht (kg)

Pack size

RL718

6.75 @ 100

7.60 @ 200

68

20

RL818

7.60 @ 100

7.60 @ 200

79

20

RL918

8.55 @ 100

7.60 @ 200

93

20

RL1018

9.50 @ 100

7.60 @ 200

109

15

RL1118

10.65 @ 100

7.60 @ 200

131

15

RL1218

11.90 @ 100

7.60 @ 200

157

10

Ribbed wire reinforcing mesh in standard 6.0m x 2.4m sheets. Complies with AS/NZS 4671.

TREnCH MEsH

Product Code

Width (mm)

No of Wires

Approx Mass /sht (kg)

Pack size

L8TM3

200

3

7

40

L8TM4

300

4

9

40

L8TM5

400

5

11

L11TM3

200

3

13

30

L11TM4

300

4

18

30

L11TM5

400

5

22

L12TM3

200

3

16

30

L12TM4

300

4

22

30

L12TM5

400

5

27

Ribbed wire trench mesh in 6.0m lengths. Complies with AS/NZS 4671.

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

7

sTAnDARD REInfORCEMEnT

DEfORMED bAR

Product Code

stock Length (mm)

Metres per tonne

Lengths per tonne Approx

N10S6

6000

1560

260

N12S6

6000

1083

181

N12S9

9000

1083

120

N12S12

12000

1083

90

N16S6

6000

609

102

N16S9

9000

609

68

N16S12

12000

609

51

N20S6

6000

390

65

N20S9

9000

390

43

N20S12

12000

390

32

N24S9

9000

271

30

N24S12

12000

271

23

N28S12

12000

199

17

N32S12

12000

152

13

N36S12

12000

120

10

Deformed steel reinforcement bar Grade D500N to AS/NZS 4671.

sWIMMInG POOL REInfORCInG bAR

Product Code

stock Length (mm)

Metres Per tonne

Lengths per tonne Approx

S12S6

6000

1083

181

S12S9

9000

1083

120

Deformed bar Grade D250N to AS/NZS 4671. Used in the construction of domestic swimming pools.

8

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

sTAnDARD REInfORCEMEnT

ROUnD bAR

Product Code

stock Length (mm)

Metres per tonne

Lengths per tonne Approx

R6S6

6000

3691

615

R10S6

6000

1560

260

R12S6

6000

1083

181

R16S6

6000

609

102

R20S6

6000

390

65

R24S6

6000

271

45

R27S6

6000

214

36

R33S6

6000

143

24

R36S6

6000

120

20

Round bar Grade R250N to AS/NZS 4671.

TIP To estimate the approximate weight of a bar product in kilogrammes per metre (kg/m).

Divide the number 1000 by the metres per tonne value from the table.

For example: For 16mm bar 1000 / 609 = 1.6 kg/m

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

9

sTAnDARD REInfORCEMEnT

LIGATUREs

6mm Ligatures Product Code

Dimensions (mm)

Pack size

LIG61520

150 x 200

25

LIG61530

150 x 300

25

LIG62020

200 x 200

25

LIG62030

200 x 300

25

LIG62040

200 x 400

25

LIG62050

200 x 500

25

LIG62520

250 x 200

25

LIG62530

250 x 300

25

LIG63030

300 x 300

25

LIG63050

300 x 500

25

LIG63520

350 x 200

25

LIG63530

350 x 300

25

LIG64030

400 x 300

25

LIG64520

450 x 200

25

LIG64530

450 x 300

25

Product Code

Dimensions (mm)

Pack size

LIG102020

200 x 200

25

LIG102025

200 x 250

25

LIG103015

300 x 150

25

LIG103020

300 x 200

25

LIG103030

300 x 300

25

LIG103520

350 x 200

25

LIG103530

350 x 300

25

10mm Ligatures

LIG104020

400 x 200

25

LIG104020A

200 x 400

25

LIG104030

400 x 300

25

LIG104530

450 x 300

25

Standard size ligatures for tying reinforcing bar or trench mesh. Manufactured from plain round bar Grade R250N to AS/NZS 4671.

10

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

sTAnDARD REInfORCEMEnT

sTARTER bARs

Product Code

Dimensions (mm)

Bar size

shape

SB1012H SB1012 SB1014

1100 x 150 x 120 1000 x 200 1400 x 200

R10 R10 R10

Safety Hook L L

SB120820 SB121020 SB121030 SB121215 SB121220 SB1212 SB1214 SB1210 SB121000 SB121200 SB121500 SB122000 SB123000

800 x 200 1000 x 200 1000 x 300 1200 x 150 1200 x 200 1200 x 250 1400 x 250 1000 x 150 x 100 1000 1200 1500 2000 3000

N12 N12 N12 N12 N12 N12 N12 N12 N12 N12 N12 N12 N12

L L L L L L L Safety Hook Straight Straight Straight Straight Straight

SB161030 SB1614

1000 x 300 1400

N16 N16

L L

Standard cut and bent deformed bar Grade D500N to AS/NZS 4671.

CORnER bARs

Product Code

Dimensions (mm)

Bar size

Angle of Bend

CB1205

500 x 500

N12

90 degree

CB1206

600 x 600

N12

90 degree

CB120545

500 x 500

N12

45 degree

CB120645

600 x 600

N12

45 degree

CB1606

600 x 600

N16

90 degree

CB1607

700 x 700

N16

90 degree

CB1608

800 x 800

N16

90 degree

CB160745

700 x 700

N16

45 degree

Standard cut and bent deformed bar Grade D500N to AS/NZS 4671.

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

11

sTAnDARD REInfORCEMEnT

z fOOTInG CAGEs

Product Code

Width x height (mm)

Z17X20412

substitute for...

170 x 200

top L8TM3

Bottom L8TM3

Z17X30810

170 x 300

L11TM3

L11TM3

Z17X30811

170 x 300

L12TM3

L12TM3

Z17X40810

170 x 400

L11TM3

L11TM3

Z17X40811

170 x 400

L12TM3

L12TM3

Prefabricated footing cages in 6m lengths. Manufactured to AS/NZS 4671.

Wz fOOTInG CAGEs

substitute for...

Product Code

Width x height (mm)

top

Bottom

TZ20X30611

200 x 300

L11TM3

L11TM3

TZ20X30612

200 x 300

L12TM3

L12TM3

TZ20X40611

200 x 400

L11TM3

L11TM3

TZ20X40612

200 x 400

L12TM3

L12TM3

TZ30X30811

300 x 300

L11TM4

L11TM4

Prefabricated footing cages in 6m lengths. Manufactured to AS/NZS 4671.

12

131 557 arcreo.com.au SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

sTAnDARD REInfORCEMEnT

RIbWIRE sPIRALs

Product Code

Wire Diameter (mm)

spiral Diameter (mm)

RBW6M0SP15

6

150

40

RBW6M0SP17

6

170

40

turns

RBW6M0SP20

6

200

40

RBW6M0SP25

6

250

40

RBW6M0SP30

6

300

40

RBW6M0SP45

6

450

40

L grade ribbed wire spirals. Manufactured to AS/NZS 4671. Longitudinal bars shown for illustration purposes only.

Access ARC on the move Our mobile site m.arcreo.com.au is now ready for your smartphone Check opening hours, contact details and directions to your closest store Browse our interactive product catalogue stay up to date with the latest ARC news and promotions

R

131 557 arcreo.com.au

13

Connect directly using this QR code SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum LENGTHS™ quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your EXTRAORDINARY attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

sTAnDARD REInfORCEMEnT

DOES YOUR NEXT PROJECT NEED SOMETHING EXTRAORDINARY? CUsTOMIsED PRODUCTs Ask ARC about custom products designed to your specifications.

AsK Us AbOUT...

GENERAL FABRICATION

PILE CAGES

PILE CAGES

GALvANISEd REINFORCEMENT

STAINLESS STEEL REINFORCEMENT

STAINLESS STEEL REINFORCEMENT

GALvANISEd REINFORCEMENT

FABRICATION

ROLLMATTM REINFORCEMENT

ROLLMATTM REINFORCEMENT

14

131 557 arcreo.com.au ™ EXTRAORDINARY LENGTHS SPECIAL CONDITIONS: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

R

bUILDInG ACCEssORIEs

PLAsTIC CLIPfAsT sPACERs

Product Code

height (mm)

std Pack

CFB20

20

100

CFB25

25

100

CFB30

30

100

CFB32

32

100

CFB35

35

100

CFB40

40

100

CFB50

50

100

CFB65

65

100

CFB75

75

100

Fast Clip On chairs available in a wide range of cover sizes for bars 12-16mm.

Ideal for suspended slabs.

PLAsTIC CLIPfAsT sPACERs

Product Code

height (mm)

std Pack

CFBP40

40

100

CFBP50

50

100

CFBP65

65

100

CFBP75

75

100

Fast Clip On chairs type BP for bars 20-36mm. Ideal for beams and columns.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

15

bUILDInG ACCEssORIEs

PLAsTIC CLIPfAsT sPACERs

Product Code

height (mm)

std Pack

CFM20

20

100

CFM25

25

100

CFM30

30

100

CFM32

32

100

CFM40

40

100

CFM50

50

100

CFM65

65

100

CFM75

75

100

CFSBASE

Plastic Base

100

Fast Clip On mesh spacer type M supports for tilt up, precast panels and slab on ground using bases.

16

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

PLAsTIC DECK CHAIRs

Product Code

Application

height (mm)

std Pack

PDS20

Bottom

20/25

100

PDS25

Bottom

25/30

100

PDS30

Bottom

30/40

100

PDS35

Bottom

35/45

100

PDS40

Bottom

40/50

100

PDS50

Bottom

50/65

100

PDS65

Top

65/75

100

PDS90

Top

90/100

100

PDS110

Top

110/120

100

PDS130

Top

130/140

100

PDS150

Top

150/160

100

PDS170

Top

170/180

100

PDS190

Top

190/200

100

BCBASE130

Base for top deck spacers

100

Suitable for suspended slabs. Supports top and bottom reinforcement.

Product Code

Application

height (mm)

std Pack

BPDS25/30

Bottom

25/30

100

BPDS35/40

Bottom

35/40

100

BPDS45/50

Bottom

45/50

100

BPDST65/75

Top

65/75

50

BPDST90/100

Top

90/100

50

BPDST110/120

Top

110/120

50

BPDST130/140

Top

130/140

50

BPDST150/160

Top

150/160

50

BPDST170/180

Top

170/180

50

BPDST190/200

Top

190/200

50

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

17

bUILDInG ACCEssORIEs

PLAsTIC fAsTWHEEL

Product Code

Cover (mm)

Bar size (mm)

std Pack

FW2012

20

4-12

100

FW2512

25

4-12

100

FW2520

25

16-20

100

FW3012

30

4-12

100

FW3020

30

12-20

100

FW4012

40

4-12

100

FW4020

40

12-20

100

FW5012

50

4-12

100

FW5020

50

12-20

100

FW6012

60

4-12

100

FW6512

65

8-12

100

FW7512

75

4-12

100

FW7520

75

12-20

100

Plastic circular spacer designed to clip onto fitment and rotate. For columns and piers.

18

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

PLAsTIC sLAb On GROUnD sPACERs

Product Code

height (mm)

std Pack

SOG2540

20/40

100

SOG5065

50/65

100

SOG5065H

50/65 Slide Clip H Base

100

SOG7590

75/90

100

SOG85100

85/100

100

SOG105110

105/110

100

SOG115120

115/120

100

SOG125130

125/130

100

SOG135140

135/140

100

SOG145150

145/150

100

SOGC5065

50/65 Clip on

100

SOGC7590

75/90 Clip on

100

SOGC85100

85/100 Clip on

100

Combination size plastic bar chair in popular sizes.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

19

bUILDInG ACCEssORIEs

PLAsTIC TIPPED WIRE CHAIRs

Product Code

height (mm)

std Pack

BCPT20

20

200

BCPT25

25

100

BCPT30

30

100

BCPT40

40

100

BCPT50

50

100

BCPT65

65

100

BCPT75

75

100

BCPT80

80

100

BCPT90

90

100

BCPT100

100

100

BCPT110

110

50

BCPT120

120

50

BCPT130

130

50

BCPT140

140

50

BCPT150

150

50

BCPT160

160

50 50

BCPT170

170

BCPT180

180

25

BCPT190

190

25

BCPT200

200

25

BCPT210

210

25

BCPT220

220

25

BCPT230

230

25

BCPT240

240

25

BCPT250

250

25

BCPT260

260

25

BCPT270

270

25

BCPT280

280

25

BCPT290

290

25

BCPT300

300

25

BCPT320

320

25

BCPT340

340

25

BCPT360 BCPT380

360 380

25 25

Four legged wire support for top and bottom reinforcement.

20

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

METAL bAsE

Product Code

For use with sizes (mm)

Diameter (mm)

std Pack

BASE152

20-140

152

100

BASE224

150-220

224

50

Flat sheet metal base for use with wire bar chairs.

WIRE TREnCH MEsH CLIPs

Product Code

Cover (mm)

Bar size (mm)

std Pack

TMC8150

150

8TM

100

TMC8200

200

8TM

50

TMC8250

250

8TM

100

TMC8300

300

8TM

50

TMC8350

350

8TM

50

TMC8400

400

8TM

50

TMC11200

200

11TM

50

TMC11250

250

11TM

100

TMC11300

300

11TM

50

TMC11350

350

11TM

50

TMC11400

400

11TM

50

TMC11450

450

11TM

50

TMC11500

500

11TM

50

TMC12200

200

12TM

50

TMC12250

250

12TM

100

TMC12300

300

12TM

50

TMC12350

350

12TM

50

TMC12400

400

12TM

50

TMC12450

450

12TM

50

TMC12500

500

12TM

50

Trench mesh clips provide a fast and efficient way to achieve a rigid cage for foundations.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

21

bUILDInG ACCEssORIEs

PLAsTIC TREnCH MEsH sUPPORTs

Product Code

Width (mm)

Cover (mm) x Bar size (mm)

std Pack

TMS60

290

60 x 8-12

25

Suitable for Trench mesh and Z cages. Style shown in photo may differ depending on state.

PLAsTIC COnTInUOUs bAR CHAIRs

Product Code

Length (mm)

Cover (mm)

std Pack

SMCBC252

2000

25

100

SMCBC402

2000

40

100

SMCBC502

2000

50

100

Ensures quick placement of reinforcement.

22

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

COnCRETE bLOCK sPACERs

Product Code

Description

height (mm)

std Pack

ASPW25

Wired

25

125

ASPW30

Wired

30

100

ASPW35

Wired

35

100

ASPW40

Wired

40

75

ASPW45

Wired

45

75

ASPW50

Wired

50

60

ASPW55

Wired

55

50

ASPW60

Wired

60

40

ASPW65

Wired

65

40

ASPW70

Wired

70

30

ASPW75

Wired

75

30

ASPW80

Wired

80

25

ASPW85

Wired

85

25

CBF6550

Flat 65 x 50mm

75

25

High load capacity, dual height concrete block spacer.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

23

bUILDInG ACCEssORIEs

bAR GUARDs

Product Code

size Bar (mm)

std Pack

BARGUARD

12-36

100

Plastic yellow end cap for reinforcing bar. Also fits onto star pickets.

REOsOK速

Product Code

size Bar (mm)

std Pack

RS1220

12-20

50

RS2432

24-32

50

Plastic removable safety caps. RS2432 fits over star picket ends.

24

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

bOnDEK速 & ACCEssORIEs

Product Code

Description

BDDOMC

0.60mm Bondek. Cut to length

BD75C

0.75mm Bondek. Cut to length

BD100C

1.00mm Bondek. Cut to length

BDEF100C

Edgeform 1mm x 100mm cut

BDEF125C

Edgeform 1mm x 125mm cut

BDEF150C

Edgeform 1mm x 150mm cut

BDINFILL

Plastic Infill Strip 25 x 3000mm

BDFILL

Polystyrene Infill Strip 1200mm

Structural formwork system to form a suspended composite concrete slab. Cover width 590mm.

sTRAMIT COnDECK HP速 & ACCEssORIEs

Product Code

Description

CD75C

0.75mm Condeck HP速. Cut to length

CD100C

1.00mm Condeck HP速. Cut to length

CDEF100C

Edgeform 1 x 100 x 100mm cut

CDEF125C

Edgeform 1 x 125 x 100mm cut

CDEF150C

Edgeform 1 x 150 x 100mm cut

Structural formwork system for suspended composite concrete slabs. Cover width 300mm for easy handling.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

25

bUILDInG ACCEssORIEs

CRACK-A-JOInT 速

Product Code

Description

Dimension (mm)

Min Qty

DYCRAK253

Plain

25 x 3000

25

DYCRAK453

Plain

45 x 3000

25

DYCRAK253B

Rip a Strip Black

25 x 3000

10

DYCRAK453B

Rip a Strip Black

45 x 3000

10

Fluted preformed metal crack inducer designed to induce a crack along the strip as the concrete cures.

CRACK InDUCER On GROUnD

Product Code

Description

Dimension (mm)

Min Qty

DYGCRACK25

Plastic Strip

3000 x 25mm up to 200mm slab

10

Designed to induce a crack in floor slab from the ground up. To be used in conjunction with Danley Dowel Cradles.

26

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

DOWEL bARs bLACK

Product Code

Length (mm)

Bar size

DL16450FC

450

16

DL16600FC

600

16

DL20450FC

450

20

DL20600FC

600

20

Black round bar used to control movement in joints of concrete slabs. Grade R250N friction cut.

DOWEL bARs HOT DIPPED GALvAnIsED

Product Code

Length (mm)

Bar size

DL16450FCD

450

16

DL16600FCD

600

16

DL20450FCD

450

20

DL20600FCD

600

20

DL24600FCD

600

24

DL20800FCD

800

20

Hot dipped galvanised round bar used to control movement in joints of concrete slabs. Grade R250N friction cut.

DOWEL sERTs

Product Code

Length (mm)

Bar size

DWLSERT16

200

16

DWLSERT20

300

20

Nail on, two part, black plastic sleeve for dowels.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

27

bUILDInG ACCEssORIEs

DOWEL EXPAnsIOn CAPs

Product Code

std Pack

CONCAP12

12

100

CONCAP16

16

100

CONCAP20

20

100

CONCAP24

24

100

A plastic cap with a hinged end. Designed to fit over a round dowel bar allowing for expansion by creating a void at the end of the dowel bar.

DOWEL sLEEvEs UnIvERsAL

Product Code

Description

Dimension (mm)

Colour

KJUDS1623R

Round

16 x 230

Pink

KJUDS1630R

Round

16 x 300

Pink

KJUDS2023R

Round

20 x 230

Blue

KJUDS2030R

Round

20 x 300

Blue

KJUDS1623S

Square

16 x 230

Green

KJUDS1630S

Square

16 x 300

Green

KJUDS2023S

Square

20 x 230

Yellow

KJUDS2030S

Square

20 x 300

Yellow

Full length dowel sleeve suitable for jointing applications. Available for round or square dowels and colour coded. Square dowels include boot.

28

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

DOWEL sPEED sLEEvEs

Product Code

Description

Dimension (mm)

Colour

SSR1623

Round

16 x 240

100

SSR1630

Round

16 x 310

100

SSR2023

Round

20 x 240

100

SSR2030

Round

20 x 300

100

SSNP16 SSNP20

Nail Plate Nail Plate

16 20

20 20

Round dowel sleeve with reusable nailing plate.

sQUARE DOWEL bARs bLACK

Product Code

Length (mm)

square Bar size (mm)

DQ16300FC

300

16

DQ16400FC

400

16

DQ16450FC

450

16

DQ16500FC DQ16600FC

500 600

16 16

DQ20300FC DQ20400FC

300 400

20 20

DQ20450FC

450

20

DQ20500FC DQ20600FC

500 600

20 20

DQ25300FC DQ25400FC

300 400

25 25

DQ25500FC DQ25600FC

500 600

25 25

Black square dowel bar friction cut, used to control movement in joints of concrete slabs.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

29

bUILDInG ACCEssORIEs

sQUARE DOWEL bARs HOT DIPPED GALvAnIsED

Product Code

Length (mm)

square Bar size (mm)

DQ16400FCD

400

16

DQ16450FCD

450

16

DQ16500FCD DQ16600FCD

500 600

16 16

DQ20400FCD DQ20450FCD

400 450

20 20

DQ20500FCD DQ20600FCD

500 600

20 20

DQ25400FCD DQ25500FCD DQ25600FCD

400 500 600

25 25 25

Hot dipped galvanised square dowel bar friction cut, used to control movement in joints of concrete slabs.

DOWELMAsTER 速

Product Code

Description (mm)

Dimension (mm)

Box Qty

DLMASTER16

Square

16

100

DLMASTER20

Square

20

100

NAILPLT16

Nailing plate

16

100

NAILPLT20

Nailing plate

20

100

Square plastic sleeve suitable for square steel dowels.

30

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

DOWEL COvERs sQUARE METAL

Product Code

Dowel size (mm)

Dimension (mm)

Min Qty

DYDCM16200

16

200

100

DYDCM16250

16

250

100

DYDCM16300

16

300

100

DYDCM20200

20

200

100

DYDCM20250

20

250

100

DYDCM20300

20

300

100

DYDCM25200

25

200

100

DYDCM25250

25

250

100

DYDCM25300

25

300

100

Metal square covers for square dowels.

DIAMOnD 速 DOWEL & sLEEvEs

Product Code

Description

Dimension (mm)

Min Qty

DYDD06B

Black with sleeve

6 x 110

1

DYDD06G

Galvanised with sleeve

6 x 110

1

DYDD10B

Black with sleeve

10 x 110

1

DYDD10G

Galvanised with sleeve

10 x 110

1

DDKB110625

Kit black

6 x 110

25

DDKG110625

Kit galvanised

6 x 110

25

DDKB111015

Kit black

10 x 110

15

DDKG111015

Kit galvanised

10 x 110

15

High performance steel plate dowel system for joints in concrete slabs. Sleeve acts as nail plate with nails already inserted ready for easy use.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

31

bUILDInG ACCEssORIEs

bIsCUIT DOWELs

32

Product Code

Description

Dimension (mm)

Min Qty

CBD6BLK

Black with sleeve

6 x 110 x 150

10 per box

CBD6GAL Galvanised with sleeve 6 x 110 x 150

10 per box

CBD10BLK

10 x 110 x 150

10 per box

CBD10GAL Galvanised with sleeve 10 x 110 x 150

10 per box

Black with sleeve

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

DOWEL PLATE CRADLEs

Product Code

Description Dowel Cradle

Dimension (mm)

slab thick (mm)

DYPC10156B

Black

3000 x 10

150

DYPC10156G

Galvanised

3000 x 10

150

DYPC1017B

Black

3000 x 10

175

DYPC1017G

Galvanised

3000 x 10

175

Danley速 Plate Dowel Cradles consist of a plate dowel secured in a fabricated cradle, offering a highly efficient dowel system well suited for contraction joints. Dowels available in black, galvanised and stainless steel (on request).

DOWEL PLATE CRADLEs

Product Code

Description Dowel Cradle

Dimension (mm)

slab thick (mm)

DCPL06150B

Black

3000 x 6

150

DCPL06150D

Galvanised

3000 x 6

150

DCPL10180D

Galvanised

3000 x 10

180

DCPL10180B

Black

3000 x 10

180

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

33

bUILDInG ACCEssORIEs

fLEXIbLE EXPAnsIOn JOInTInG

Product Code

Description

Dimension L X W (mm)

thick (mm)

JFP1075

Plain

25000 x 75

10

JFP10100

Plain

25000 x 100

10

JFP10125

Plain

25000 x 125

10

JFP10150

Plain

25000 x 150

10

JFP10200

Plain

25000 x 200

10

JFA1075

Adhesive

25000 x 75

10

JFA10100

Adhesive

25000 x 100

10

JFA10125

Adhesive

25000 x 125

10

JFA10150

Adhesive

25000 x 150

10

JFA10200

Adhesive

25000 x 200

10

JFZ1075

Zipped

25000 x 75

10

JFZ10100

Zipped

25000 x 100

10

JFZ10125

Zipped

25000 x 125

10

JFZ10150

Zipped

25000 x 150

10

JFZ10200

Zipped

25000 x 200

10

A flexible foam suitable for joints in concrete slabs.

34

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

sTIff EXPAnsIOn JOInTInG

Product Code

Description

Dimension L X W (mm)

thick (mm)

JF1075

Stiff Joint

2440 x 75

10

JF10100

Stiff Joint

2440 x 100

10

A bitumen impregnated stiff fibrous material used in joints in concrete slabs.

fORMWORK PRODUCT – TM PECAfORM

Product Code

Description

Dimension (mm)

PFORM060

Pecaform

600 x 2400

PFORM090

Pecaform

900 x 2400

PFORM120

Pecaform

1200 x 2400

PFORM150

Pecaform

1500 x 2400

PFORM180

Pecaform

1875 x 2400

Flat steel wire mesh with a heat shrunk layer of polyethylene applied to both sides of the mesh.

A sacrificial alternative to conventional formwork.

EXPAnsIOn JOInTs

Product Code

Description

Dimension (mm)

KJFXJ1030

Profile & foam includes pegs & wedges

3000 x 100

KJFX1230

Profile & foam includes pegs & wedges

3000 x 125

KJFX1530

Profile & foam includes pegs & wedges

3000 x 150

KJFXJDS

Sleeve with foot

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

35

bUILDInG ACCEssORIEs

KEY JOInTs AnD ACCEssORIEs

Product Code

Description

Dimension (mm)

std Pack

KJC100

Key joint with 8 pegs

6000 x 100

KJC150

Key joint with 8 pegs

6000 x 150

KJC200

Key joint with 8 pegs

6000 x 200

KJC300

Key joint with 8 pegs

6000 x 300

KJCWEDGE

Wedge

KJCPEG350

Peg & Wedge

350

8

KJCPEG400

Peg & Wedge

400

8

KJCPEG500

Peg & Wedge

500

8

PvC Capping Permanent KJCCPB25

Black with Strip

24000 x 9 x 13

PvC Capping Removable KJCCRG25

Grey

24000 x 7.5 x 10

KJCCRG6

Grey

6000 x 12 x 14

Rebate Moulds KJRM12

Yellow Rigid PVC

3000 x 12 x 12

KJRM20

Grey Rigid PVC

3000 x 10 x 20

Foam Filler Strips KJFC100

100mm

6000 x 30 x 12

KJFC150

150mm

6000 x 40 x 12

KJFC200

200mm/300mm

6000 x 50 x 12

Galvanised sheet metal profile used in forming contraction joints in concrete footpaths, using a peg and wedge system. Also listed is a variety of cappings and rebate moulds.

36

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

KEY JOInTs AnD ACCEssORIEs

Product Code

Description

Dimension (mm)

std Pack

KJD100

Key joint with 8 stakes

6000 x 100

10

KJD125

Key joint with 8 stakes

6000 x 120

10

KJD150

Key joint with 8 stakes

6000 x 150

10

KJD200

Key joint with 8 stakes

6000 x 200

10

KJD250

Key joint with 8 stakes

6000 x 250

10

KJDPEG350

Stakes

10 x 350

8

KJDPEG450

Stakes

10 x 450

8

KJDPEG550

Stakes

10 x 550

8

Key Joint Capping KJDRS25B

Black

25000

2

KJDRS25G

Grey

25000

2

KJDCR25

Rem Std

25000 x 10

2

Galvanised sheet metal profile used in forming contraction joints in concrete footpaths, using a drive and twist stake system.

Product Code

Description

Dimension (mm)

Min Qty

KJDEXP100

Expanda joint with 4 stakes

3000 x 100

10

KJDEXP125

Expanda joint with 4 stakes

3000 x 125

10

KJDEXP150

Expanda joint with 4 stakes

3000 x 150

10

KJDEXP200

Expanda joint with 4 stakes

3000 x 200

10

KJDEXP250

Expanda joint with 4 stakes

3000 x 250

10

Expanda joint is a standard Key joint with 5mm closed-cell foam on the inside allowing a continuous pour each side of the joint.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

37

bUILDInG ACCEssORIEs

sOLID bAsE AnGLE HOT DIPPED GALvAnIsED GALINTEL速 Galvanised Steel Lintels

Product Code

Dimension

Length (mm)

GLIN8F85

85 x 7

800

GLIN9F85

85 x 7

900

GLIN10F85

85 x 7

1000

GLIN11F85

85 x 7

1100

GLIN12F85

85 x 7

1200

GLIN9A100

100 x 100 x 6

900

GLIN12A100

100 x 100 x 6

1200

GLIN15A100

100 x 100 x 6

1500

GLIN18A100

100 x 100 x 6

1800

GLIN21A100

100 x 100 x 6

2100

GLIN24A100

100 x 100 x 6

2400

GLIN27A100

100 x 100 x 6

2700

GLIN18A150

100 x 150 x 6

1800

GLIN21A150

100 x 150 x 6

2100

GLIN24A150

100 x 150 x 6

2400

GLIN27A150

100 x 150 x 6

2700

GLIN30A150

100 x 150 x 6

3000

GLIN33A150

100 x 150 x 6

3300

GLIN36A150

100 x 150 x 6

3600

GLIN40A150

100 x 150 x 6

4000

Galintel速 is a cold rolled flat and angle lintel bar providing recesses for mortar. Used in the formation of composite beams in brick veneer construction.

38

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

GALInTEL® REnDAbAR AnGLE HOT DIPPED GALvAnIsED GALINTEL® Galvanised Steel Lintels

Product Code

Dimension

Length (mm)

REN09A100

100 x 100 x 8

900

REN12A100

100 x 100 x 8

1200

REN15A100

100 x 100 x 8

1500

REN18A100

100 x 100 x 8

1800

REN21A100

100 x 100 x 8

2100

REN24A100

100 x 100 x 8

2400

REN21A150

150 x 100 x 8

2100

REN24A150

150 x 100 x 8

2400

REN27A150

150 x 100 x 8

2700

REN30A150

150 x 100 x 8

3000

REN33A150

150 x 100 x 8

3300

REN36A150

150 x 100 x 8

3600

Galintel® is a cold roll lintel bar providing recesses and slots to facilitate cement rendering onto composite beams in brickwork.

GALInTEL® MULTI-RIb T bAR HOT DIPPED GALvAnIsED GALINTEL® Galvanised Steel Lintels

Product Code

Dimension

Length (mm)

GLINT27

200 x 200 x 7

2700

GLINT30

200 x 200 x 7

3000

GLINT33

200 x 200 x 7

3300

GLINT936

200 x 200 x 9

3600

GLINT939

200 x 200 x 9

3900

GLINT942

200 x 200 x 9

4200

GLINT945

200 x 200 x 9

4500

GLINT951

200 x 200 x 9

5100

GLINT954

200 x 200 x 9

5400

GLINT957

200 x 200 x 9

5700

GLINT960

200 x 200 x 9

6000

Galintel® T section is a cold rolled lintel bar providing recesses for mortar. Used in the formation of composite beams in cavity brick wall construction supporting both skins of brickwork.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

39

bUILDInG ACCEssORIEs

POLYTHEnE bUILDInG fILM

Product Code

Dimension (m)

Description

Gauge (um)

FS3425

25 x 4

Orange Super

300

FO2633

33 x 6

Arcon Premium

200

FO2250

50 x 2

Orange Polythene

200

FO2450

50 x 4

Orange Polythene

200

FP2250

50 x 2

Orange Premium

200

FP2450

50 x 4

Orange Premium

200

FB2250

50 x 2

Black Polythene

200

FB2450

50 x 4

Black Polythene

200

FBHI2250

50 x 2

Black High Impact

200

FBHI2450

50 x 4

Black High Impact

200

TPVC30

30 x .05

Grey Duct Tape

Moisture barriers and sealing tape used in slab on ground construction.

40

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

POLYsTYREnE vOID fORMERs

Product Code

Dimension (mm)

height (mm)

POD150

1090 x 1090

150

POD175

1090 x 1090

175

POD225

1090 x 1090

225

POD300

1090 x 1090

300

POD375

1090 x 1090

375

A void former manufactured from expanded polystyrene used for on ground concrete raft slabs.

Note base product codes shown above only. Refer applicable delivery zone for complete code ie: POD150Z1 for Zone 1 etc.

POD sPACERs

Product Code

Dimension (mm)

std Pack

PODSPA2

100-110

25

PODSPA4

100-300

20

PODRAIL40

40 x 600

25

Plastic multi purpose beam spacers.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

41

bUILDInG ACCEssORIEs

bT COUPLERs

Product Code

Description

Bar size (mm)

ABC12

Standard

12

ABC16

Standard

16

ABC20

Standard

20

ABC24

Standard

24

ABC28

Standard

28

ABC32

Standard

32

ABC36

Standard

36

ABCDT12

Double thread

12

ABCDT16

Double thread

16

ABCDT20

Double thread

20

ABCDT24

Double thread

24

ABCDT28

Double thread

28

ABCDT32

Double thread

32

ABCDT36

Double thread

36

ABCST12

R/H Standard

12

ABCST16

R/H Standard

16

ABCST20

R/H Standard

20

ABCST24

R/H Standard

24

ABCST28

R/H Standard

28

ABCST32

R/H Standard

32

ABCST36

R/H Standard

36

Small steel coupler with an internal metric thread for joining threaded reinforcing bars.

42

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

LEnTOn速 COUPLERs

Product Code

Description

Bar size (mm)

LENA212

A2 Standard

12

LENA216

A2 Standard

16

LENA220

A2 Standard

20

LENA224

A2 Standard

24

LENA228

A2 Standard

28

LENA232

A2 Standard

32

LENA236

A2 Standard

36

LENTH12

Threading

12

LENTH16

Threading

16

LENTH20

Threading

20

LENTH24

Threading

24

LENTH28

Threading

28

LENTH32

Threading

32

LENTH36

Threading

36

Lenton速 standard couples are designed to splice the same diameter bars where one bar is free to move and can be rolated.

MbT ET COUPLERs

Product Code

Description

Bar size (mm)

MBTET12

Splice coupler

12

MBTET16

Splice coupler

16

MBTET20

Splice coupler

20

MBTET24

Splice coupler

24

MBTET28

Splice coupler

28

MBTET32 MBTET36

Splice coupler Splice coupler

32 36

Steel couplers to connect reinforcing bars of the same size using fully engaged lockshear bolts.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

43

bUILDInG ACCEssORIEs

REID COnsTRUCTIOn sYsTEMs Product Code

Description

Bar size (mm)

RB12C

Reidbar 500 MPa cut

12mm

RB16C

Reidbar 500 MPa cut

16mm

RB20C

Reidbar 500 MPa cut

20mm

RB25C RB32C

Reidbar 500 MPa cut Reidbar 500 MPa cut

25mm 32mm

500N Grade reinforcing bar which is easily joined at any point. The system comprises of a full range of fittings shown below.

Product Code

Description

Bar size (mm)

RBC12

Coupler black

12

RBC16

Coupler black

16

RBC20

Coupler black

20

RBC25 RBC32

Coupler black Coupler black

25 32

RBC12D RBC16D

Coupler HDG Coupler HDG

12 16

RBC20D

Coupler HDG

20

RBC25D RBC32D

Coupler HDG Coupler HDG

25 32

RBLN12 RBLN16

Lock nut black Lock nut black

12 16

RBLN20

Lock nut black

20

RBLN25 RBLN32

Lock nut black Lock nut black

25 32

RBNP12 RBNP16

Nail plate Nail plate

12 16

RBNP20 RBNP25

Nail plate Nail plate

20 25

RBTI12 RBTI16

Threaded insert black Threaded insert black

12 16

RBTI20

Threaded insert black

20

RBTI25 RBTI32

Threaded insert black Threaded insert black

25 32

Reidbar system couplers, nuts, nail plates and threaded inserts to suit.

44

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

sHEAR LOAD COnnECTORs

Product Code

Description

slab thick (mm)

DSD50

Complete Unit

180 - 280

DSD100 DSD150

Complete Unit Complete Unit

320 - 420 450 - 600

DSD50M DSD100M DSD150M

Dowel Dowel Dowel

180 - 280 320 - 420 450 - 600

DSD50F DSD100F DSD150F

Sleeve Sleeve Sleeve

180 - 280 320 - 420 450 - 600

DSDQ100

Complete Unit ' Q'

320 - 420

DSDQ130

Complete Unit ' Q'

360 - 460

DSDQ150

Complete Unit ' Q'

450 - 600

DSDQ100F

Sleeve 'Q'

320 - 420

DSDQ130F

Sleeve 'Q'

360 - 460

DSDQ150F

Sleeve 'Q'

450 - 600

ESDQ-L20

Lockable Dowel - Slab to Slab

160 - 260

ESDQ-L20W

Lockable Dowel - Slab to Wall

160 - 260

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

45

bUILDInG ACCEssORIEs

TIE WIRE

Product Code

Description

Diameter (mm)

TWA1M603

3kg coil

1.6

TWA1M605

5kg coil

1.6

TWA1M610

10kg coil

1.6

AWCL1M6

50kg coil

1.57

AWCL3M2

50kg coil

3.15

Coils of black annealed tie wire used as a steel fixing aid.

LOOP TIEs

Product Code

Description

Length (mm)

Qty Per Roll

LT110

Black

110

2000

LT125

Black

125

2000

LT150

Black

150

2000

LT200

Black

200

2000

LTHP110

Black

110

200

LTHP125

Black

125

200

LTHP150

Black

150

200

LTG110

Galvanised

110

2000

LTG125

Galvanised

125

2000

LTG150

Galvanised

150

2000

LTG200

Galvanised

200

2000

Tie wire with loops used as a steel fixing aid.

46

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

bUILDInG ACCEssORIEs

REEL bELT AnD TOOLs

Product Code

Description

Min Qty

IDLREEL

Aluminuim reel for tie wire

1

IDLNYBELT

Wide nylon belt & buckle for reel

1

IDLBELT

Leather belt for reel

1

IDLCOILA14

1.40mm black tie wire coil for reel

1

IDLCOILA

1.57mm black tie wire coil for reel

1

IDLCOILG

1.57mm galvanised tie wire coil for reel

1

TWSTLN

Twisting tool with long handle

1

NIPP8

Knippex Nippers 200mm

1

NIPP200

Crescent end cutters 200mm

1

Reels, belt coils and tools used in steel fixing.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

47

WELDMEsH

EAsYsHEETs

eAsY sheets 1200mm x 2000mm

Easy Sheets

Product Code

Description

Aperture size (mm)

Wire diameter (mm)

ES2A25252

Standard Galvanised

25 x 25

2.50

ES325502

Standard Galvanised

25 x 50

3.15

ES350502

Standard Galvanised

50 x 50

3.15

ES450502

Standard Galvanised

50 x 50

4.00

ES450752

Standard Galvanised

50 x 75

4.00

ES4100100

Standard Galvanised

100 x 100

4.00

ES5100100

Standard Galvanised

100 x100

5.00

East Sheets offer the handy man numerous applications. Ideal for use in the garden.

eAsY sheets 1200mm x 2400mm

Easy Sheets

Product Code

Description

Aperture size (mm)

Wire diameter (mm)

ES2A2525

Standard Galvanised

25 x 25

2.50

ES35050

Standard Galvanised

50 x 50

3.15

ES45075

Standard Galvanised

50 x 75

4.00

ES4100100

Standard Galvanised

100 x 100

4.00

ES5100100

Standard Galvanised

100 x100

5.00

East Sheets offer the handy man numerous applications. Ideal for use in the garden.

48

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

WELDMEsH

WELDMEsH

WeLDMesh 3000mm x 2400mm Product Code

Description

Aperture size (mm)

Wire diameter (mm)

WG2A11

Standard galvanised

25 x 25

2.50

WG311

Standard galvanised

25 x 25

3.15

WG312

Standard galvanised

25 x 50

3.15

WG322

Standard galvanised

50 x 50

3.15

WG422

Standard galvanised

50 x 50

4.00

WG423

Standard galvanised

50 x 75

4.00

WG522

Standard galvanised

50 x 50

5.00

WG523

Standard galvanised

50 x 75

5.00

WG544

Standard galvanised

100 x 100

5.00

WG5A44

Standard galvanised

100 x 100

5.60

WG5A46

Standard galvanised

100 x 150

5.60

Easy to use 3m x 2.4m sheets. Industrial application in a galvanised format.

WeLDMesh 3000mm x 2400mm Product Code

Description

Aperture size (mm)

Wire diameter (mm)

WB311

Bright

25 x 25

3.15

WB312

Bright

25 x 50

3.15

WB422

Bright

50 x 50

4.00

WB423

Bright

50 x 75

4.00

WB522

Bright

50 x 50

5.00

WB523

Bright

50 x 75

5.00

WB544

Bright

100 x 100

5.00

WB5A44

Bright

100 x 100

5.60

Easy to use 3m x 2.4m sheets. Industrial application in a non galvanised format.

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

49

RURAL PRODUCTs

RURAL PRODUCTs sheePYARD Mesh sheets Aperture size Wire diameter (mm) (mm)

Product Code

Description

SYMG5410A

6000 x 900mm Standard Gal.

100 x 250

5.0

SYMG5410B

6000 x 1000mm Standard Gal.

100 x 250

5.0

SYM46G569

6000 x 900mm Standard Gal.

100 x 150

5.0

SYM46G561

6000 x 1000mm Standard Gal.

100 x 150

5.0

Sheepyard mesh ideally suited for rural and garden applications.

sheePYARD Mesh ROLLs Aperture size Wire diameter (mm) (mm)

Product Code

Description

SYM410G53

30000 x 900mm Standard Gal. Blue

100 x 250

5.0

SYM410G54

30000 x 1100mm Standard Gal. Blue

100 x 250

5.0

SYM46G539

30000 x 900mm Standard Gal. Red

100 x 150

5.0

SYM46G531

30000 x 1100mm Standard Gal. Red

100 x 150

5.0

Sheepyard mesh ideally suited for rural and garden applications.

FIeLD GAte INFILLs Aperture size Wire diameter (mm) (mm)

Product Code

Description

FGIG4824F

2350 x 1100mm Standard Gal. Flush cut

100 x 200

5.0

FGIG4830F

2950 x 1100mm Standard Gal. Flush cut

100 x 200

5.0

FGIG4836F

3500 x 1100mm Standard Gal. Flush cut

100 x 200

5.0

FGIG4842F

4150x1100mm Standard Gal. Flush cut

100 x 200

5.0

FGIG4848F

4750x1100mm Standard Gal. Flush cut

100 x 200

5.0

Sheepyard mesh ideally suited for rural and garden applications.

50

131 557 arcreo.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

fEnCInG

WIRE fEnCInG

BANKsIA 速

ACACIA 速

JACARANDA 速

GARDeN

WAttLe 速

WILLOW/sUNshINe tM

Pool compliant, 1200mm h.*

Pool compliant, 1200mm h.*

The ARC range of wire fencing provides distinct and elegant styles for your home or pool. Designs are available in either a galvanised or powder-coated finish. *The Willow/Sunshine and Wattle styles are the options for pool fencing only (at 1200mm h).

Wire fences are typically rolled over top and bottom and are perfect for multiple applications around your house, whether it be to secure a small area or use as a front garden fence. The fencing styles on this page vary in each state and come in a range of heights and lengths. For the sizes and styles available in your state, contact ARC Fences on 13 15 57 or view our full range of fencing products and ideas at arcfences.com.au *POOL FENCING INFORMATION: Swimming pool regulations vary between states. Check with your local council to ensure your pool fence is compliant. You can also view our website for further information relating to Australian Standard and pool safety www.arcfences.com.au/safety/ These colours are a sample only. ARC Fences has a full range of decorative colours available.

Conditions do apply for nonstandard colours.

White

Cream

Claret

Black

Green Charcoal

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

51

fEnCInG

TUbULAR ALUMInIUM fEnCInG

eDeN The ARC aluminium steel range is the perfect choice for your garden or pool.

Designs are available in a range of styles, sizes and colors. Aluminium pool fencing is also popular choice as it is pool compliant (min1200mm h).

Pool compliant, 1200mm h.*

KePPeL 速

The fencing styles on this page vary in each state and come in a range of heights and lengths. For the sizes and styles available in your state, contact ARC Fences on 13 15 57 or view our full range of fencing products and ideas at arcfences.com.au *POOL FENCING INFORMATION: Swimming pool regulations vary between states. Check with your local council to ensure your pool fence is compliant.

You can also view our website for further information relating to Australian Standard and pool safety www.arcfences.com.au/safety/

Pool compliant, 1200mm h.*

These colours are a sample only.

ARC Fences has a full range of decorative colours available. Conditions do apply for nonstandard colours.

BYRON tM

White

Cream

Claret

Black

Green Charcoal

Pool compliant, 1200mm h.*

52

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

fEnCInG

TUbULAR sTEEL fEnCInG

stURt 速 The ARC tubular steel range is the perfect choice for your garden or pool. Designs are available in a range of styles, sizes and colors. Steel pool fencing is also popular choice as it is pool compliant (min1200mm h).

Pool compliant, 1200mm h.*

LAssIteR 速

The fencing styles on this page vary in each state and come in a range of heights and lengths. For the sizes and styles available in your state, contact ARC Fences on 13 15 57 or view our full range of fencing products and ideas at arcfences.com.au *POOL FENCING INFORMATION Swimming pool regulations vary between states. Check with your local council to ensure your pool fence is compliant.

You can also view our website for further information relating to Australian Standard and pool safety www.arcfences.com.au/safety/

Pool compliant, 1200mm h.*

These colours are a sample only.

ARC Fences has a full range of decorative colours available. Conditions do apply for nonstandard colours.

BAss 速

White

Cream

Claret

Black

Green Charcoal

Pool compliant, 1200mm h.*

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

53

fEnCInG

InDUsTRIAL fEnCInG

AMBAssADOR ® Through rail and face welded designs • Through rail - the panels are strengthened by passing the vertical tubes through the top and bottom rails of the fence.

• Face welded - welds and tubes are exposed

DIPLOMAt ®

Panels are available in various sizes and colors. Posts, gates and accessories are also avalaible.

Why choose Cyclone?

Cyclone® has been providing fencing solutions to Australia for over 100 years.

We have an extensive range of products that are built to last.

• Excellent security - provides constant security against trespassers, pilferers and animals

vANGUARD ®

• Long-term durability - stands up to rugged conditions and requires minimal maintenance • Design Flexibility - additional fencing can be matched with the original for future extensions • Footprint - same product wherever you go

GARRIsON ®

• Helpful advice - our friendly team of fencing staff will work with you to ensure you’ll get the right product for your project • Recognised excellence - compliance with Australian Standard

54

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

fEnCInG

CHAInWIRE fEnCInG

50mm DIAMOND 2.50MM STANdARd GALvANISEd

KNUCKLe seLveDGe

BARB seLveDGe

Description

standard selvedge

Roll size

UOM

Roll Weight per metre

50 x 2.5mm x 600mm

KK

10/15/20

Each

0.95

50 x 2.5mm x 900mm

KK

10/15/20

Each

1.42

50 x 2.5mm x 1200mm

KK

10/15/20

Each

1.89

50 x 2.5mm x 1500mm

KK

10/15/20

Each

2.37

50 x 2.5mm x 1800mm

KK/KB

10/15/20

Each

2.84

50 x 2.5mm x 2100mm

KK/KB

10/15/

Each

3.32

50 x 2.5mm x 2400mm

KK/KB

10

Each

3.79

50 x 2.5mm x 2700mm

KK

10

Each

4.26

50 x 2.5mm x 3000mm

KK

10

Each

4.74

50 x 2.5mm x 3600mm

KK

10

Each

5.68

Description

standard selvedge

Roll size

UOM

Roll Weight per metre

50 x 2.5mm x 600mm

KK

10/15/20

Each

0.95

2.50MM LIFEMAXTM

50 x 2.5mm x 900mm

KK

10/15/20

Each

1.43

50 x 2.5mm x 1200mm

KK

10/15/20

Each

1.89

50 x 2.5mm x 1500mm

KK

10/15/20

Each

2.37

50 x 2.5mm x 1800mm

KK/KB

10/15/20

Each

2.84

50 x 2.5mm x 2100mm

KK/KB

10/15/

Each

3.31

50 x 2.5mm x 2400mm

KK/KB

10

Each

3.79

50 x 2.5mm x 2700mm

KK

10

Each

4.26

50 x 2.5mm x 3000mm

KK

10

Each

4.73

50 x 2.5mm x 3600mm

KK

10

Each

5.68

Chainwire roll lengths vary between states. Other diamond sizes are available on request. Minimum order quantities apply. ARC Fences can supply you with a full range of posts, fittings and gates for all your fencing needs.

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

55

fEnCInG

CHAInWIRE fEnCInG

50mm DIAMOND 3.15MM LIFEMAXTM Description

standard selvedge

Roll size

Weight UOM Roll per metre

50 x 3.15mm x 600mm

KK

10/15/

Each

1.48

50 x 3.15mm x 900mm

KK

10/15/

Each

2.22

50 x 3.15mm x 1200mm

KK

10/15/

Each

2.96

50 x 3.15mm x 1500mm

KK

10/15/

Each

3.70

50 x 3.15mm x 1800mm

KK/KB

10/15/

Each

4.43

50 x 3.15mm x 2100mm

KK/KB

10

Each

5.17

50 x 3.15mm x 2400mm

KK/KB

10

Each

5.91

50 x 3.15mm x 3000mm

KK

10

Each

7.39

50 x 3.15mm x 3600mm

KK

10

Each

8.87

Chainwire roll lengths vary between states. Other diamond sizes are available on request. Minimum order quantities apply. ARC Fences can supply you with a full range of posts, fittings and gates for all your fencing needs.

50mm DIAMOND 2.50MM BLACK ANd GREEN PvC Description

standard selvedge

Roll size

Weight UOM Roll per metre

50 x 2.5mm x 900mm

KK

10/15/20

Each

1.61

50 x 2.5mm x 1200mm

KK

10/15/20

Each

2.15

50 x 2.5mm x 1500mm

KK

10/15/20

Each

2.68

50 x 2.5mm x 1800mm

KK/KB

10/15/20

Each

3.22

50 x 2.5mm x 2100mm

KK/KB

10/15/

Each

3.76

50 x 2.5mm x 2400mm

KK/KB

10

Each

4.29

50 x 2.5mm x 3000mm

KK

10

Each

5.37

50 x 2.5mm x 3600mm

KK

10

Each

6.44

Chainwire roll lengths vary between states. Other diamond sizes are available on request. Minimum order quantities apply. ARC Fences can supply you with a full range of posts, fittings and gates for all your fencing needs.

56

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

fEnCInG

CHAInWIRE fEnCInG

50mm DIAMOND 3.15MM BLACK ANd GREEN PvC Description

standard selvedge Roll size UOM

Roll Weight per metre

50 x 3.15mm x 900mm

KK

10/15/

Each

2.56

50 x 3.15mm x 1200mm

KK

10/15/

Each

3.34

50 x 3.15mm x 1500mm

KK

10/15/

Each

4.24

50 x 3.15mm x 1800mm

KK/KB

10/15/

Each

5.02

50 x 3.15mm x 2100mm

KK/KB

10/15/

Each

5.80

50 x 3.15mm x 2400mm

KK/KB

10

Each

6.96

50 x 3.15mm x 3000mm

KK

10

Each

8.25

50 x 3.15mm x 3600mm

KK

10

Each

9.92

Chainwire roll lengths vary between states. Other diamond sizes are available on request. Minimum order quantities apply. ARC Fences can supply you with a full range of posts, fittings and gates for all your fencing needs.

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

57

fEnCInG

EDGE PROTECTIOn fEnCInG

edge Protection Fencing Dimensions Unit

Ref No

height m

Length m

Mass kg

Panel

EPPK10

1.0

2.4

14

Latchloc

D516100U

1.0

1.0

4

All dimensions shown are nominal. Australian Patent No. 653551

Cyclone Security Edge Protection Fencing provides protection for personnel on the perimeters of suspended concrete slabs, excavations, liftwells, etc, particularly on high rise buildings. Virtually maintenance free, the re-usable galvanised panels and posts are easily installed, removed, transported and stored. The 1000mm x 2400mm galvanised Edge Protection Panels are manufactured by galvanised steel wire and features a rolled top and bottom edge

58

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

fEnCInG

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

59

fEnCInG

fEnCInG ACCEssORIEs

Domestic Fence Fittings Product Code

Description

UOM

CLUG

U Clip Gal

Each

STH1220Z

Tek Screw Hex HD M12x20 Zinc

Each

FLNG3825P

Flange Suit 38x25mm Rail Alum. Painted

Each

TF2525D2

Flange 25x25 Std Gal 1Hole Tab Zinc

Each

MLTPS2BGA

Magna Latch – Top Pull Series 2

Each

HNGTCA1

Tru-Close Hinge (Set of 2) TCA1

Each

Product Code

Description

UOM

T3240

Tee 32 Thru 40 Butt Gal

Each

T3250

Tee 32 Thru 50 Butt Gal

Each

T4032

Tee 40 Thru 32 Butt Gal

Each

T5032

Tee 50 Thru 32 Butt Gal

Each

X3240

Cross 32 Butt 40 Thru Gal

Each

X3250

Cross 32 Butt 50 Thru Gal

Each

Product Code

Description

Weight

WC157L05

WIRE LX SOFT 1.57mm 330M

5kg

Industrial Fence Fittings

Wire Coils

WC157L15

WIRE LX SOFT 1.57mm 1000M

15kg

WC160VB05

WIRE PVC BLK 1.60mm 275M

5kg

WC160VB15

WIRE PVC BLK 1.60mm 830M

15kg

WC157L05

WC160UB05

5kg

WC157L15

WC160UB15

15kg

WC200L05

WIRE LIFEWIRE SOFT 2.00mm 200M

5kg

WC200L15

WIRE LIFEWIRE SOFT 2.00mm 610M

15kg

WC200VB05

WIRE PVC BLK 2.00mm 120M

5kg

WC200VB15

WIRE PVC BLK 2.00mm 365M

15kg

WC315L25

WIRE LIFEWIRE SOFT 3.15mm 410M

25kg

WC315VB25

WIRE PVC BLK 3.15mm 365M

25kg

WCH4L25

WIRE HELICOIL 4.00mm LIFEWIRE SOFT

25kg

WCH4VB25

WIRE HELICOIL 4.00mm PVC BLK

25kg

The above represents only a select range of fittings. Should you require details of our wider range, please speak with one of our friendly staff.

60

131 557 arcfences.com.au sPeCIAL CONDItIONs: Products contained within catalogue may not be stocked at all branches. Furthermore some products are subject to minimum quantities, availability, lead times and extra freight charges may be applicable to products not stocked. We draw your attention to our terms and conditions of sale found at the back of this catalogue. Please confirm availability of the products you require, prior to placement of order.

COnDITIOns Of sALE

Issue Date: 1st November 2012

1

2

Quotations, orders and contract 1.1

A written quotation issued by ARC to the Customer is an invitation to the Customer to offer to purchase and overrides ARC’s prevailing price list. A written quotation expires on the date specified as an expiry date. If no expiry date is specified, the written quotation expires 30 days after the date of the written quotation.

1.2

ARC may withdraw, revoke or vary a written quotation at any time prior to the Customer submitting and ARC accepting an offer (which may be by way of an order) in response to the invitation to purchase comprised by ARC’s written quotation.

1.3

A contract for the supply of Goods is made when ARC communicates (by writing or conduct) its acceptance of the Customer’s offer.

1.4

An order from the Customer on terms which are inconsistent with the terms of a written quotation is an offer by the Customer to buy Goods from ARC. In those circumstances, a contract for the supply of Goods is made if: (a)

ARC communicates that it is prepared to supply the ordered Goods only on the terms of these Conditions; and

(b)

the Customer accepts delivery of the ordered Goods in which case the contract is deemed to have been made as at the date of the Customer’s order.

1.5

A contract made pursuant to clauses 1.3 or 1.4 is wholly documented by any specific terms agreed by ARC and the Customer in writing including, without limitation, in a quotation and these Conditions.

1.6

To the extent that any inconsistency arises between the terms of a quotation and any clause of these Conditions, the terms of the quotation prevail to the extent of the inconsistency.

1.7

Where in the period between acceptance of a quote and delivery of the relevant Goods, ARC incurs an increase in the cost of producing and/ or delivering the Goods, ARC reserves the right to increase the quoted price of these Goods at any time prior to delivery (a “price escalation”), provided that the Customer may, if it does not agree to the price escalation, terminate part or all of the contract within 7 days after receiving notice of such price escalation.

1.8

These Conditions of Sale apply to the exclusion of any terms and conditions of trade of the Customer whether or not any inconsistency arises, and bind the Customer both personally and as trustee of any trusts of which the Customer is a trustee.

Specifications and Working Documentation 2.1

2.2

If the Customer’s order refers to a Specification or Working Documentation then: (a)

the Customer represents and warrants to ARC that any such Specification or Working Documentation does not and any Goods produced by ARC pursuant to such Specification or Working Documentation will not breach or infringe upon the rights or property of any third party including, without limitation, patent, design, copyright or other intellectual property rights and the Customer indemnifies ARC and must hold it harmless from and against any loss, damage, liability or cost suffered or incurred by ARC arising out of a breach by the Customer of the representations and warranties made by it pursuant to this clause;

(b)

the Customer releases ARC from and waives any rights or causes of action it may at any time have had against ARC but for this release in relation to any fault or defect in any Goods made pursuant to the Customer’s Specification or Working Documentation arising, whether directly or indirectly, out of the terms of the Specification or Working Documentation provided by the Customer to ARC; and

(c)

the Customer indemnifies ARC and must hold it harmless from and against any loss, damage, liability or cost suffered or incurred by ARC attributable, whether directly or indirectly, to the terms of any Specification or Working Documentation provided by the Customer to ARC.

Subject to clause 8.1, unless otherwise stated on a quotation, Goods will be supplied by the Supplier within the tolerances in regard to quantity, weight, dimension and chemical composition as specified in the relevant order or, if not specified, as consistent with usual industry practice. Where the total mass or length of any item supplied includes a fraction of a tonne, the Purchaser must pay for that fraction on a pro rata basis.

131 557 arcreo.com.au

61

COnDITIOns Of sALE

2.3

2.4

3

(a)

Goods or Services are unavailable or insufficient for any reason whatsoever;

(b)

the Purchaser has failed to comply with terms on which the Supplier has agreed to provide credit to the Purchaser;

(c)

the Purchaser or a Related Corporation of it has breached a contract with the Supplier or a Related Corporation of it including these Conditions; or

(d)

the Supplier considers it necessary or desirable to do so for any reason at all.

The Purchaser agrees that it does not rely on the skill or judgement of the Supplier in relation to the suitability of any of the Goods for a particular purpose unless it has indicated that purpose in writing to the Supplier and the Supplier has acknowledged in writing that the Goods will be fit for the particular purpose.

3 Delivery and Risk 3.1

3.2

62

Notwithstanding any other provision of these Conditions, it is a term of the contract made between the Supplier and the Purchaser that the Supplier has discretion to refuse to supply Goods or Services to the Purchaser (without liability to the Purchaser) where:

ARC’s delivery obligations are subject always to the Customer providing ARC with: (a)

(a) a 28 day Delivery Programme, updated weekly; and

(b)

(b) Working Documentation no later than the Lead Times for the corresponding Goods;

(c)

(c) unless ARC agrees otherwise in writing.

Subject to clause 3.1, ARC will deliver Goods to the Customer as follows: (a)

(ARC reserves the right to arrange transport by any means in its absolute discretion;

(b)

delivery will be made during Working Hours to the location agreed (delivery point) for the purpose of clause 1.5;

(c)

ARC or its transport contractor will deliver the Goods as close (Drop Spot) to the delivery point as, in the opinion of ARC or its transport contractor, it is safe or prudent to do so and delivery occurs and risk in the Goods passes to the Customer when ARC’s or its transport contractor’s delivery vehicle arrives at the Drop Spot;

(d)

the unloading of Goods at a Drop Spot is the Customer’s responsibility at its own cost and risk but ARC or its transport contractor may, without liability to the Customer, unload the Goods at the Drop Spot if the Customer requests ARC to do so or is absent from the Drop Spot at the time ARC or its transport contractor wishes to unload and the Customer releases and forever discharges ARC and its transport contractor from and against any claim, cause of action or liability arising out of the unloading of Goods at the Drop Spot;

(e)

where the Customer attends ARC’s premises to acquire Goods, ARC may, in its discretion: (1)

deliver the Goods into or onto the Customer’s vehicle in which case risk in the Goods passes to the Customer and delivery is effected when the Goods are set down in or on the Customer’s vehicle; or

(2)

deliver the Goods by setting them down along side the Customer’s vehicle in which case risk in the Goods passes to the Customer and delivery is effected when the Goods are set down along side the Customer’s vehicle notwithstanding that ARC’s staff may, on request, assist the Customer to load the Goods into or onto the Customer’s vehicle.

3.3

Where ARC or its transport contractor enters the Customer’s premises or the premises of a third party nominated by the Customer as a delivery point, the Customer releases ARC from any claim the Customer may at any time have had against ARC but for this release in respect of damage occasioned to the Customer’s premises or injury to persons arising out of the delivery by ARC or its transport contractor of Goods to such premises.

3.4

A statement on an invoice or delivery docket given to the Customer by ARC as to the quantity, description, date and place of delivery of Goods will be a conclusive statement and bind the Customer for all purposes.

3.5

If the Customer does not advise ARC in writing of any fault, damage or defect in Goods or failure of Goods to comply with the terms of a contract made pursuant to these Conditions within 48 hours of delivery: (a)

the Customer is deemed to have accepted the Goods and is deemed to agree that the Goods are not faulty, damaged or defective and comply with a contract made pursuant to the terms of these Conditions; and

(b)

the Customer releases and discharges ARC from and against any claims, actions, loss or liability relating to any fault, damage or defect in the Goods or any failure of the Goods to comply with a contract made pursuant to these Conditions.

131 557 arcreo.com.au

COnDITIOns Of sALE

4

3.6

If the Customer advises ARC in writing of a fault, damage or defect in Goods or a failure of Goods to comply with the terms of a contract made pursuant to these Conditions within 48 hours of delivery then ARC will, if in its opinion the Customer’s advice is reasonable and the Customer has not used the Goods, replace the Goods that appear to be faulty, damaged or defective or not in compliance with the terms of a contract made pursuant to these Conditions and ARC will have no additional liability to the Customer.

3.7

Goods are not damaged or defective by reason only of the presence of rust, millscale or rolling seams except as provided for in AS3600.

3.8

Unless otherwise agreed by ARC and the Customer in writing, ARC will bundle or package Goods the subject of an order in its discretion and the Customer releases and forever discharges ARC from any liability or claim arising out of such bundling or packaging by ARC.

3.9

ARC will not be liable for any loss incurred as a result of delay or failure to make any supply of Goods or Services or to observe any of these Conditions due directly or indirectly to an event of force majeure, being any cause or circumstance beyond ARC’s reasonable control, including but not limited to, any lack of production capacity or raw materials, strikes, lockouts, labour disputes, fires, floods, acts of God or public enemy, malicious or accidental damage, delays in transport, breakdowns in machinery or restrictions or prohibitions by any government or any semi-government authorities or embargoes. During the continuance of an event of force majeure ARC’s obligations under these Conditions will be suspended. In these circumstances, ARC has no liability whatsoever to the Customer and if the force majeure event continues for 28

Retention of Title 4.1

The Customer agrees that legal and equitable title to the Goods is retained by ARC until the Amount Payable has been paid in full by the Customer for the Goods, the Services and all other goods and services supplied to the Customer at any time. Prior to title in the Goods passing to the Customer, the Customer: (a) holds the Goods and any Processed Goods as bailee and fiduciary agent of ARC; (b) must store the Goods and such part of the Processed Goods separate from its own goods and those of any other third party in such a way as to clearly indicate at all times that the Goods and such part of the Processed Goods are owned by ARC; and (c) must ensure that, at all times, the Goods and such part of the processed goods are properly stored, protected, readily identifiable and insured.

4.2

The Customer hereby agrees to accept this appointment as bailee and fiduciary agent of ARC.

4.3

The Customer may only install or affix the Goods to other goods (so that they become an Accession to those other goods) or use or permit the Goods to be manufactured, processed, assembled, commingled or otherwise dealt with (so that they become Processed Goods) in the ordinary course of the Customer’s normal business.

4.4

The Customer may sell or deal in the ordinary course of business with the Goods, and such part of the Processed Goods or any Accession provided that: (a) any such sale or dealing is at arms’ length and on market terms; and (b) the Customer holds the proceeds of any sale of or dealing in the Goods and such part of the proceeds of any sale of or dealing in the Processed Goods on trust for ARC in a separate identifiable account as the beneficial property of ARC and the Customer must pay such amount to ARC on demand.

4.5

For purpose of this clause 4, “such part” means an amount equal in dollar terms to the amount owing by the Customer to ARC at the time the Goods are used in the manufacture of, or incorporated into, the Processed Goods or Accession.

4.6

Notwithstanding any other provision to the contrary, ARC reserves the following rights in relation to the Goods until the Amount Payable has been paid in full by the Customer in respect of the Goods and all other goods and services supplied to the Customer at any time:

4.7

(a)

legal and equitable ownership of the Goods;

(b)

to retake possession of the Goods; and

(c)

to keep or resell any of the Goods repossessed.

In the event of a breach of this contract by the Customer including, without limitation, failure by the Customer to pay any Amount Payable by the required date, the Customer must return the Goods to ARC immediately on demand. If the Customer does not return the Goods to ARC on demand, ARC is entitled (without further notice) to: (a)

enter upon the Customer’s premises at any time to do all things necessary to recover the Goods or any Processed Goods;

131 557 arcreo.com.au

63

COnDITIOns Of sALE

64

take possession of the Goods or any Processed Goods wherever located;

(c)

take possession of any Goods which have become an Accession, wherever located; and/or

(d)

appoint a person to be a receiver of all or any of the Goods, Accessions, Processed Goods or other property the subject of the security interests created by the contract.

4.8

The Customer hereby grants full leave and irrevocable licence to ARC and any person authorised by ARC to enter upon any premises where the Goods, Processed Goods or Accessions may for the time being be placed or stored for the purpose of retaking possession of those Goods, Processed Goods or Accessions.

4.9

The Customer:

4.10

5

(b)

(a)

must pay ARC all costs and expenses incurred or payable by ARC for registering, maintaining or releasing any security interest, charge, mortgage or caveat in connection with the contract, or recovery of the Amount Payable or in otherwise enforcing ARC’s rights against the Customer;

(b)

must pay the costs of registering any PPSA financing statement and such costs may be invoiced or debited against the Customer’s credit account; and

(c)

indemnifies ARC for all fees (including legal and debt collection fees on a full indemnity basis), costs and expenses incurred or suffered as a result of any and all prosecution, actions, demands, claims or proceedings brought by or against ARC in connection with the retaking possession of the Goods or the exercise by ARC of its rights under this clause, and the Customer shall repay all such fees, costs, losses, damages, expenses or any other sums of money on demand.

The Customer acknowledges and agrees that the contract between the parties comprises a security agreement and that ARC is entitled to register a financing statement in respect of the security interests given under that contract.

Price and GST 5.1

The price of Goods or Services or both will be ARC prevailing price at the time of delivery and does not include GST unless expressly stated to the contrary.

5.2

Where a party to these Conditions (Supply Maker) makes a Taxable Supply (within the meaning of the GST Act) under or in connection with these Conditions to another party to these Conditions (Recipient) and the consideration otherwise payable for the Taxable Supply is not specifically stated to include GST, the Supply Maker will be entitled to recover from the Recipient as an additional amount the amount of any GST payable on the Taxable Supply, and the Recipient must pay such GST at the same time that the consideration for the Taxable Supply is payable.

5.3

The amount of any cost recovery or compensation for costs under or in connection with these Conditions shall be reduced by the amount of any Input Tax Credits (within the meaning of the GST Act) available in respect of those costs.

5.4

A party to these Conditions will not be obliged to pay any amount in respect of GST to the other party unless and until a Tax Invoice (within the meaning of the GST Act) has been issued in respect of that GST.

5.5

In addition to payment of the price for Goods, the Customer is responsible for and ARC may recover from the Customer: (a)

taxes (other than income tax), stamp duty or other statutory charges or levies whether State or Federal payable in relation to the supply of Goods; (

(b)

the cost of delivery of Goods including, without limitation, costs relating to long loads, wide loads, escorted loads, drop trailers, crane trucks (including associated personnel), particular dunnage requirements, palletising or crating of materials, early deliveries (at or around 7:00 am), delivery loads of less than 10 tonnes, delivery to non-metropolitan sites;

(c)

the cost of providing materials necessary to manufacture Goods in accordance with a Specification or Working Documentation when such materials are not indicated on the Specification or Working Documentation including, without limitation, hurdles, chairs, laps and bracing;

(d)

costs incurred by ARC arising out of late notification by the Customer of a change to an agreed delivery schedule with such costs to include, without limitation, costs of double handling, storage of material, trailer hire and scheduling of production and delivery;

(e)

storage charges where Goods are not collected immediately upon being made available for collection at ARC’s premises;

(f)

demurrage costs or charges incurred by ARC for attendance at a delivery point after the expiration of the first three quarters of an hour such charges to be calculated at master carrier rates;

(g)

legal and collection costs and disbursements on an indemnity basis incurred by ARC in relation to a breach of these Conditions by the Customer;

131 557 arcreo.com.au

COnDITIOns Of sALE

5.6

6

(h)

all costs, charges, expenses or any other outgoings incurred by ARC with respect to any Variation by the Customer;

(i)

all costs or charges incurred by ARC with respect to the recovery or return of Goods from the Customer (including re-stocking charges) whether or not such recovery or return of Goods occurs in relation to any breach of these Conditions; and

(j)

the cost of any testing or inspection of Goods, or testing or inspection of products or materials required by the Customer to be used in relation to the manufacture of Goods.

The Customer must pay to ARC any costs, charges and expenses (including all stamp duty and legal fees on an indemnity basis) incurred by ARC in connection with these Conditions, the exercise or attempted exercise of any power, right or remedy under these Conditions, and the failure of the Customer to comply with these Conditions.

Payment and Credit Terms 6.1

6.1 Unless ARC has agreed to extend credit to the Customer, payment for Goods must be made by the Customer in immediately available funds on or immediately prior to delivery of the Goods.

6.2

6.2 Unless otherwise agreed by the Customer and ARC, ARC will be entitled to deliver the Goods in one or more instalments. Where delivery of the Goods is effected by way of part delivery, ARC will be entitled to invoice the Customer for pro-rata progress payments in respect of Goods delivered.

6.3

6.3 Where ARC has agreed to extend credit to the Customer, ARC will submit an invoice to the Customer for Goods or Services or both supplied to the Customer (including, without limitation, Goods delivered in part fulfilment of an order) and the full amount of the invoice together with any additional charges (if any) must be paid by the Customer to ARC by no later than the date which is 30 days after the date of ARC’s invoice or such other date for payment as ARC may agree in writing. All payments are claimed under the Building & Construction Industry Security of Payments Act (VIC) or equivalent in each state or territory.

6.4

6.4 ARC is entitled to allocate and apply amounts received from the Customer to any part of the Amount Payable or any other amounts due to ARC in any manner it determines, including in any manner required to preserve any purchase money security interest it has in any Goods, and despite any instruction, request or direction from the Customer as to how payments should be applied.

6.5

6.5 The Customer must pay ARC on demand default interest at the rate prescribed from time to time in the Penalty Interest Rates Act 1983 (Vic) on all overdue amounts owed by the Customer to ARC which interest will be calculated daily and will be payable together with the overdue amount. All payments made by the Customer will be first applied to the accrued interest.

6.6

6.6 The Customer must not retain or withhold any money owing to ARC notwithstanding any breach or alleged breach

by ARC of these Conditions including the supply of allegedly faulty or defective Goods. ARC expressly disclaims any right of the Customer to set off amounts due or alleged to be due from ARC to the Customer against amounts due or alleged to be due from the Customer to ARC under these Conditions.

6.7

6.7 ARC may, at any time, without cause, vary, suspend, limit or withdraw any credit granted to the Customer.

6.8

6.8 If the Customer breaches a provision of these Conditions including, without limitation, a provision relating to the payment of money or if the Customer, being a natural person, is the subject of any personal insolvency event including, without limitation, arising out of the Customer committing an act of bankruptcy or if the Customer, being a company, has a receiver, receiver and manager, official manager, trustee, administrator, other controller (as defined in the Corporations Act) or similar official appointed or steps are taken for such appointment over any of the assets or undertaking of the Customer or if the Customer suspends payment of its debts generally or is or becomes unable to pay its debts when they are due or is presumed to be insolvent under the Corporations Act or if the Customer ceases or threatens to cease to carry on business or any guarantee or security given to ARC in relation to the Customer is purported to be revoked or asserted to be unenforceable then ARC may, without limiting any other rights it may have, do any or all of the following things: (a)

withdraw any credit facilities which may have been extended to the Customer and require immediate payment of all moneys owed to ARC by the Customer;

(b)

terminate, without ARC incurring liability to the Customer any contract in force between ARC and the Customer for the sale or supply of Goods or Services or both and, without limitation, withhold any deliveries of Goods or performance of Services pursuant to any purchase order accepted by ARC;

131 557 arcreo.com.au

65

COnDITIOns Of sALE

(c) 6.9

The Customer as beneficial owner charges in favour of ARC all of its interest in all of the present and future real property of the Customer as security for the due and punctual payment of all debts and monetary liabilities owed by the Customer to ARC pursuant to a contract on or including the terms of these Conditions, including the Amount Payable. The Customer acknowledges that ARC has a caveatable interest in any real property owned by the Customer and consents to ARC lodging a caveat to note its interest.

6.10

Upon demand by ARC, the Customer agrees to immediately execute a mortgage on terms satisfactory to ARC to more particularly describe the security interest conferred by this clause.

6.11

Should the Customer fail within a reasonable time of such demand to execute such mortgage or should the Customer be in default of any of its obligations under the contract, then the Customer irrevocably appoints ARC and each of its authorised officers, jointly and severally, as its attorney with authority to do on its behalf any thing that it may lawfully authorise an attorney to do including, without limitation, to make, sign, execute, seal, register and deliver any document and to take possession of, use, sell or otherwise dispose of any property of the Customer, including real property, and the Customer ratifies all acts and things done by ARC and its authorised officers in exercising this power of attorney. A third party may rely on a certified copy of these Conditions as evidence of ARC’s appointment as the Customer’s attorney.

6.12

The Customer grants a security interest in the Goods to ARC to secure payment of the Amount Payable. The security interest:

6.13

7

7.2

66

(a)

extends to and continues in all proceeds, Accessions and Processed Goods; and

(b)

is a purchase money security interest to the extent to which it secures payment of that part of the Amount Payable which comprises the aggregate unpaid purchase price of Goods.

The Customer must not do or permit anything to be done that may result in the purchase money security interest granted to ARC ranking in priority behind any other security interest.

PPSA 7.1

8

suspend performance under or terminate, in either case without ARC incurring liability to the Customer, any contracts in force between ARC and the Customer, not being contracts for the sale or supply of Goods.

The Customer: (a)

waives its right under section 157 of the PPSA to receive a copy of the verification statement verifying registration of a financing statement or a financing change statement relating to a security interest created under the Contract; and

(b)

contracts out of its rights to receive any other notice or statement under any other provision of the PPSA (including for the avoidance of doubt, any of the provisions specified in clause 7.2).

To the fullest extent permitted by the PPSA, the parties agree to contract out of the following provisions of the PPSA: sections 95, 117, 118, 120, 121(4), 125, the second sentence of section 126(2), sections 129(2), 129(3), 130, 132(3) (d), 132(4), 135, 142 and 143, which sections (or parts of sections) do not apply to the contracts between the Customer and ARC.

Limiting Liability 8.1

These Conditions set out the entire agreement between the parties in relation to their subject matter. The terms of the United Nations Convention on Contracts for the International Sale of Goods, 1980 (the Vienna Convention) and all other terms or conditions in relation to the subject matter of these Conditions, whether implied by use, statute or otherwise, are expressly excluded.

8.2

No statement or recommendation made or advice, supervision or assistance given by ARC, its employees, agents, transport contractors or representatives whether oral or written must be construed as or constitutes a warranty or representation by ARC or a waiver of any clause in these Conditions. ARC is not liable for loss or damage arising directly or indirectly from any act or omission to act arising directly or indirectly from any such statements, recommendations, advice, supervision or assistance.

8.3

Subject to clauses 3.6 and 8.4, ARC is not liable for any loss or damage, however caused (including, but not limited to, by the negligence of ARC), suffered by the Customer in connection with a supply of Goods or Services under these Conditions.

8.4

If the CCA or any other legislation implies a condition or warranty into these Conditions in respect of goods or services supplied, and ARC’s liability for breach of that condition or warranty may not be excluded but may be limited, clause 8.3 does not apply to that liability and instead ARC’s liability for any breach of that condition or warranty is limited to:

131 557 arcreo.com.au

COnDITIOns Of sALE

(1)

(2)

8.5

9

11

(A)

replacing the Goods or supplying equivalent goods;

(B)

repairing the Goods;

(C)

paying the cost of replacing the Goods or of acquiring equivalent goods;

(D)

paying the cost of having the Goods repaired; or

in the case of a supply of Services, ARC doing either or both of the following (at its election): (A)

supplying the Services again;

(B)

paying the cost of having the Services supplied again.

Notwithstanding any other provision of these Conditions, ARC is not liable to the Customer for any indirect, special or consequential loss or damage suffered or incurred by the Customer arising out of a breach by ARC of a contract made pursuant to these Conditions or a negligent act or omission of ARC or a breach of a statutory duty or obligation by ARC. The phase “indirect, special or consequential loss or damage” is deemed to include the following: economic loss, loss of opportunity, loss of profit or revenue, loss or damage in connection with claims against the Customer by third parties, liquidated sums or liquidated damages.

Consumers 9.1

10

in the case of a supply of Goods, ARC doing any one or more of the following (at its election):

Where and only to the extent that the supply of Goods is to a “consumer” (as that term is defined by the ACL) then, in respect of that supply: (a)

the Special Conditions at www.arcreo.com.au/trading-terms are incorporated into and form part of these Conditions, and apply as part of the contract between the Customer and ARC; and

(b)

clause 8 does not apply and, except as stated otherwise in the Special Conditions, nothing in these Conditions excludes, restricts or modifies any Consumer Guarantee applying under the ACL.

Miscellaneous 10.1

Nothing in these Conditions is intended to exclude, restrict or modify rights which the Customer may have under the CCA or any other legislation which may not be excluded, restricted or modified by agreement.

10.2

For the purpose of these Conditions and any transaction effected pursuant to these Conditions, mass of steel reinforcing bars will be calculated on the basis of mass per metre as defined in AS4671-2001 plus an allowance for rolling margin as defined in AS1100 part 501 of up to 4%, including other costs as determined by ARC from time to time.

10.3

A party waives a right under these Conditions only if it does so in writing. A party does not waive a right simply because it fails to exercise the right, delays exercising the right or only exercises part of the right. A waiver of one breach of a term of these Conditions does not operate as a waiver of another breach of the same term or any other term.

10.4

If a provision in these Conditions is wholly or partly invalid or unenforceable in any jurisdiction, that provision or the part of it that is invalid or unenforceable must, to that extent, and in that jurisdiction, be treated as deleted from these Conditions. This does not affect the validity or enforceability of the remaining provisions in that jurisdiction, or of the deleted provision in any other jurisdiction.

10.5

ARC may assign or otherwise deal with the benefit of any contract made pursuant to these Conditions without the consent of the Customer. The Customer may not assign its rights under a contract or lease, licence or loan the Goods to any third party or grant a security interest in the Goods without prior notice to and written consent from ARC.

10.6

The Customer must not disclose ARC’s Confidential Information unless the Customer receives the prior written consent of ARC, such information enters the public domain (other than as a result of a breach by the Customer) or its use or disclosure is required by law.

Jurisdiction 11.1

The law of the state or territory in which ARC delivers Goods to the Customer is the proper law of these Conditions. The parties irrevocably submit to the nonexclusive jurisdiction of the courts of Victoria.

131 557 arcreo.com.au

67

COnDITIOns Of sALE

12

Interpretation In these Conditions: Accession means any Goods which are installed in or affixed to other goods; ACL means the Australian Consumer Law in Schedule 2 of the CAA; ARC means The Australian Steel Company (Operations) Pty Ltd ABN 89 069 426 955; Amount Payable means all amounts payable by the Customer at any time to ARC and/or ARC’s Related Corporations (whether or not those amounts have become due for payment under these Conditions) in relation to the Goods or the contract between the Customer and ARC (including, but not limited to, any invoiced amount, interest, fees, costs or expenses); CCA means the Competition and Consumer Act 2010 (Cth); Conditions means these terms and conditions; Confidential Information means all information (in any form, whether written, electronic or otherwise) including any proprietary information, data, trade secrets, ideas and know-how (including systems, processes, techniques and algorithms), throughout the world in or relating to the Goods or the Services; Customer means a person who makes a contract with ARC on the terms of these Conditions; Delivery Programme means the Customer’s proposed delivery dates for the Goods; Goods means any goods supplied by ARC which are the subject of an order, or part of those Goods where the context allows; GST means the tax payable on Taxable Supplies within the meaning of the GST Act; GST Act means the A New Tax System (Goods and Services Tax) Act 1999 and any related Act imposing such tax or legislation that is enacted to validate, recapture or recoup such tax; Lead Time means the minimum period before the proposed delivery date by which the Customer must provide Working Documentation which period shall be notified by ARC on request.

Processed Goods means Goods which, after delivery, become part of a product or mass by being manufactured, processed, assembled, commingled or otherwise dealt with so that their identity is lost in the product or mass; PPSA means the Personal Property Securities Act 2009 (Cth); Related Corporation has the meaning given to the term “related body corporate” in section 50 of the Corporations Act 2001; Services means services supplied by ARC to the Customer in relation to Goods the subject of an order which has been accepted by ARC; Specification includes metallurgical properties, chemical formulae, ingredients, architectural drawings, engineering drawings or other plans and accompanying schedules as varied or amended from time to time; Variation means any modification, amendment or change to the terms of an order submitted by the Customer (whether or not such order has been accepted by ARC) including, without limitation, in relation to scheduling and re-scheduling, loading requirements, delivery times or delivery sites; Working Documentation means architectural drawings, site drawings, structural drawings, construction drawings and reinforcement schedules or any other document or operational information provided by or on behalf of the Customer to ARC for the purpose of the transactions contemplated by these Conditions; and Working Hours means between 7.00am and 5.00pm, Monday to Friday (inclusive) excluding public holidays.

In addition, the following terms have the same meanings given to them in the PPSA: (a) financing statement; (b) proceeds; (c) purchase money security interest; (d) security agreement; (e) security interest; and (f) verification statement.

68

131 557 arcreo.com.au

sPECIAL COnDITIOns

Issue Date: 1st November 2012

1

2

Interpretation In these Special Conditions: (a)

ACL means the Australian Consumer Law in Schedule 2 of the Competition and Consumer Act 2010 (Cth);

(b)

Special Conditions means the Terms and Conditions set out in this document;

(c)

Consumer means a Customer that is a consumer (as that term is defined in the ACL) of the particular supply of Goods;

(d)

Consumer Guarantees means the guarantees relating to supply of goods and services to consumers under Division 1 of Part 3-2 of the ACL;

(e)

Conditions of Sale means the ARC Conditions of Sale dated 1st November 2012;

(f)

if there is any inconsistency between the Conditions of Sale and these Special Conditions, these Special Conditions prevail;

(g)

unless otherwise stated, all other defined words or expressions in these Special Conditions have the same meaning as in the Conditions of Sale;

(h)

unless otherwise stated, an expression used or defined in the ACL has the same meaning in these Special Conditions; and (i) nothing in these Special Conditions is to be construed as being contrary to the provisions of the ACL or the Competition and Consumer Act 2010 (Cth).

Application of Special Conditions These Special Conditions apply to a supply of Goods when and only to the extent that:

3

(a)

the supply of such Goods is to a Consumer;

(b)

and these Special Conditions are incorporated into and form part of the Conditions of Sale pursuant to clause 9 of the Conditions of Sale.

Exceptions to the Consumer Guarantee The Consumer’s right to undisturbed possession of the Goods does not apply to the extent that ARC maintains a valid security interest in the Goods under clauses 4 and 6 of the Conditions of Sale.

4

Liability Limitation (a)

To the extent Goods supplied by ARC are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then ARC’s liability for any failure to comply with a Consumer Guarantee: i) (other than those guarantees relating to title, undisturbed possession and undisclosed securities) is limited, at ARC’s sole discretion, to: A. replacement, resupply or repair of the Goods; B. payment of the cost of replacing or acquiring equivalent goods; or C. payment of the cost of having the goods repaired; and ii) to the extent that the Goods comprise a service, is limited, at ARC’s sole discretion, to supplying the service again or payment of the costs of having the service supplied again.

(b)

Clause 4(a) does not apply if the Consumer establishes that it would not be fair and reasonable for ARC to rely on that clause.

(c)

To the extent that clause 4(a) does not apply, ARC acknowledges that the Goods come with guarantees that cannot be excluded under the Australian Consumer Law. For a major failure, the Consumer is entitled to a replacement or refund and for compensation for any other reasonably foreseeable loss or damage. If the Goods fail to be of acceptable quality but the failure does not amount to a major failure, the Consumer is entitled to have the Goods repaired or replaced.

131 557 arcreo.com.au

69

sPECIAL COnDITIOns

5

How to Make a Claim (a)

If the Goods prove to be defective during the first 30 days after delivery or receipt (or such other period that is reasonable in the circumstances), ARC will honour its obligations under these Special Conditions or in the ACL, as applicable.

(b)

To make a claim, the Consumer must telephone ARC on 131 557 or email info@arcreo.com.au. The Consumer must give ARC details of the Goods, the date of supply, a description of the defect and appropriate contact details. If it accepts the claim, ARC will assist the Consumer with the appropriate remedy.

(c)

All Goods the subject of a claim must be accompanied by satisfactory proof of purchase, such as a legible receipt or sales invoice.

(d)

Unless the cost of doing so is unreasonably significant, the Consumer is responsible for returning defective Goods at its own expense. In all other cases, ARC will collect the Goods at its own expense.

(e)

6

ARC’s Contact details Level 5 380 Docklands Drive Docklands VIC 3008 Australia ARC National Customer Service: 131 557 E-mail: info@arcreo.com.au Website: http://www.arcreo.com.au/contact-us

70

131 557 arcreo.com.au

POInT Of sALE COnDITIOns

You, the Customer, are responsible for: •

providing ARC with sufficiently clear details about what You want to purchase. If we supply goods or services to Your specification, You release ARC from claims relating to faults in that specification. You also indemnify ARC if ARC incurs loss or damage arising from Your specification or infringing a third party’s rights

•

the safe-keeping and handling of the goods from when ARC makes them available to You, including the loading and unloading of the goods and restraining the load

•

releasing and indemnifying ARC for any loss or damage arising in any way from a) Your obligations; b) delivery

by ARC (except to the extent that ARC causes that loss or damage); c) incurred by ARC in exercising its rights under these Terms • paying for the goods and services on or before delivery.

•

notifying ARC within 48 hours from delivery of any error, non-conformance or defect in goods, services or transaction documentation after which You have no claim on ARC.

We, ARC:

1

•

will replace non-conforming, defective goods, services or transaction documentation notified within 48 hours of delivery

•

may provide product information or advice but You agree that You do not rely on ARC’s skill or judgement as to the suitability of any goods for a particular purpose

•

may refuse to supply goods or services if You owe ARC money, You breach these Terms or if there is an event beyond ARC’s control (including unavailability of goods, raw materials or machinery breakdown)

•

may recover any Goods that We own at any time. Until all amounts due to ARC by You are paid, ARC retains ownership of all goods supplied

•

may pass on any increases in the cost of the goods or services incurred between order and delivery. You may cancel the corresponding part of the order

•

will determine the mass of reinforcing bar by reference to Australian Standard AS4671 and add up to 4% for dimensional variances and other costs, as determined by ARC from time to time.

1. Liability: (1)

To the extent that ARC supplies You with goods that are not of a kind ordinarily acquired for personal, domestic or household use or consumption, then for any failure to comply with a Consumer Guarantee under Division 1 of Part 3-2 of the Australian Consumer Law (other than those guarantees relating to title, undisturbed possession and undisclosed securities): i) ARC’s liability is limited at its sole discretion, to: A. replacing, resupplying or repairing the goods; B. paying the cost of replacing or acquiring equivalent goods; or C. paying of the cost of having the goods repaired; and ii) to the extent that ARC supplies a service, ARC’s liability is limited, at its sole discretion, to supplying the service again or payment of the costs of having the service supplied again.

(2)

Clause 1 above does not apply if You are a “consumer”, as defined in the Australian Consumer Law, and you establish that it would not be fair and reasonable for ARC to rely on that clause.

(3)

To the extent that clause 1 does not apply, ARC acknowledges that the goods come with guarantees that cannot be excluded under the Australian Consumer Law. For a major failure, you are entitled to a replacement or refund and for compensation for any other reasonably foreseeable loss or damage. If the goods fail to be of acceptable quality but the failure does not amount to a major failure, You are entitled to have the goods repaired or replaced.

(4)

If ARC (or its subcontractor) enters Your premises (or premises nominated by You) to deliver goods, You release and indemnify ARC from claims for loss or damage except to the extent that ARC caused or contributed to that loss or damage.caused or contributed to that loss or damage.

131 557 arcreo.com.au

71

POInT Of sALE COnDITIOns

2

3

How to Make a Claim (a)

If the goods prove to be defective during the first 30 days after delivery or receipt (or such other period that is reasonable in the circumstances), ARC will honour its obligations set out above or in the ACL, as applicable.

(b)

To make a claim, You must telephone or email ARC (see details below). You must give ARC details of the goods, the date of supply, a description of the defect and appropriate contact details. If it accepts the claim, ARC will assist you with the appropriate remedy.

(c)

All goods the subject of a claim must be accompanied by satisfactory proof of purchase, such as a legible receipt or sales invoice.

(d)

Unless the cost of doing so is unreasonably significant, You are responsible for returning defective goods at your own expense. In all other cases, ARC will collect the goods at its own expense.

ARC’s Contact details Level 5 380 Docklands Drive Docklands VIC 3008 Australia ARC National Customer Service: 131 557 E-mail: info@arcreo.com.au Website: http://www.arcreo.com.au/contact-us

72

131 557 arcreo.com.au

ARC LOCATIOns

nATIOnAL 131 557 dOCKLANdS (03) 9903 6200 Level 5 380 Docklands Drive, Docklands VIC 3008 Fax: (03) 9903 6222 Email: info@arcreo.com.au

TAsMAnIA

Quality ISO 9001

Quality ISO 9001

BURNIE (03) 6434 4500 14 River Road Wivenhoe TAS 7320 Fax: (03) 6434 4515

Quality ISO 9001

LAUNCESTON (03) 6324 1277 (State Office) 39 Murphy Street Invermay TAS 7248 Fax: (03) 6324 1299

HOBART (03) 6216 6122 20 Duncan Street Montrose TAS 7010 Fax: (03) 6216 6133

sOUTH AUsTRALIA

Quality ISO 9001

dRY CREEK (08) 8409 9800 (State Office) 126-140 Churchill Road North Dry Creek SA 5094 Fax: (08) 8349 6280

131 557 arcreo.com.au

73

ARC LOCATIOns

vICTORIA

Quality ISO 9001

BAYSWATER (03) 9294 7800 10 Sydney Road Bayswater VIC 3153 Fax: (03) 9294 7809

SHEPPARTON (03) 5833 4611 56-60 Florence Street Shepparton VIC 3632 Fax: (03) 5833 4619

dERRIMUT (03) 8360 2777 (ARC Fences Store) 4/100 Fulton Drive Derrimut VIC 3030 Fax: (03) 8360 2766

SUNSHINE (03) 8326 4566 (State Office) 528 Ballarat Road Sunshine VIC 3020 Fax: (03) 8326 4566

Quality ISO 9001

LAvERTON NORTH (03) 8379 7000 158 Fitzgerald Road Laverton North VIC 3026 Fax: (03) 8379 7010

THOMASTOWN (03) 8467 9033 Unit 1 / 28-30 Keon Parade Thomastown VIC 3074 Fax: (03) 8467 9044

LYNBROOK (03) 8788 4350 13 Chapel Street Lynbrook VIC 3975 Fax: (03) 8788 4399

WOdONGA (02) 6022 9588 3 Kane Road Wodonga VIC 3689 Fax: (02) 6022 9599

WEsTERn AUsTRALIA

Quality ISO 9001

74

FORRESTFIELd (08) 9352 1500 (State Office) 86 Harrison Road Forrestfield WA 6058 Fax: (08) 9352 1501

131 557 arcreo.com.au

FORRESTFIELd (08) 6254 7200 290 Berkshire Road Forrestfield WA 6058 Fax: (08) 6254 7250

ARC LOCATIOns

nEW sOUTH WALEs AnD ACT BALLINA (02) 6626 8400 Cnr De Havilland & Cassna Cres Ballina NSW 2478 Fax: (02) 6626 8411

NARELLAN (02) 4645 5400 3 Exchange Parade Narellan Business Park Smeaton Grange NSW 2567 Fax: (02) 4645 5411

BATHURST (02) 6331 7266 26 Hampton Park Road Bathurst NSW 2795 Fax: (02) 6332 1030

NEWCASTLE (02) 4902 1600 31 Creek Road Wallsend NSW 2287 Fax: (02) 4902 1660

BLACKTOWN (02) 9834 7503 34 Binney Road Kings Park NSW 2148 Fax: (02) 9834 7522

PORT MACQUARIE (02) 6589 4900 Unit 1 / 8-12 Acacia Avenue Port Macquarie, NSW 2444 Fax: (08) 6589 4905

BROOKvALE (02) 9941 1400 Unit 2, 9-13 Winbourne Rd Brookvale NSW 2100 Fax: (02) 9941 1411

QUEANBEYAN (02) 6128 3777 58 Hincksman Street Queanbeyan NSW 2620 Fax: (02) 6128 3744

LIdCOMBE (02) 8755 5188 4 Bachell Avenue Lidcombe NSW 2141 Fax: (02) 8755 5111

ST MARYS (02) 8808 2333 (State Office) 10-38 Forrester Road St Marys NSW 2760 Fax: (03) 8808 2445

MITCHELL (02) 6242 7671 Unit 1 / 81 Hoskins Street Mitchell ACT 2911 Fax: (02) 6255 5742 MORUYA (02) 4474 7600 15-17 Shelley Road Moruya NSW 2537 Fax: (02) 4474 7649

Quality ISO 9001

WAGGA WAGGA (02) 6932 3630 2 Dobney Avenue Wagga Wagga NSW 2650 Fax:(02) 6932 3640 WOLLONGONG (02) 4251 2355 38-44 Montague Street Fairy Meadow NSW 2519 Fax: (02) 4251 2399

131 557 arcreo.com.au

75

ARC LOCATIOns

QUEEnsLAnD CAIRNS (07) 4048 9420 163 Spence Street Cairns QLD 4870 Fax: (07) 4048 9439 COOPERS PLAINS (07) 3005 1300 (ARC Fences Store) 926 Beaudesert Road Coopers Plains QLD 4108 Fax: (07) 3005 1320

ROCKHAMPTON (07) 4920 3633 215 Richardson Road North Rockhampton QLD 4701 Fax: (07) 4920 3622

HERvEY BAY (07) 4125 9688 9-11 Citrus Drive Dundowran QLD 4655 Fax: (07) 4125 9681

SOUTHPORT (Gold Coast) (07) 5501 1944 26 Production Avenue Molendinar QLD 4214 Fax: (07) 5501 1950

KUNdA PARK (07) 5453 5100 4-6 Mallet Street Kunda Park QLD 4556 Fax: (07) 5453 5111 MACKAY (07) 4967 4880 7 David Muir Street Slade Point QLD 4740 Fax: (07) 4967 4883

nORTHERn TERRITORY

Quality ISO 9001

76

Quality ISO 9001

PINKENBA (07) 3000 0900 (State Office) 30 Main Beach Road Pinkenba QLD 4008 Fax: (07) 3000 0909

dARWIN (08) 8923 2480 (State Office) 52 Hickman Street Winnellie NT 0821 Fax: (08) 8923 2499

131 557 arcreo.com.au

Quality ISO 9001

Quality ISO 9001

TOWNSvILLE (07) 4755 3980 646-658 Ingham Road Mount Louisa QLD 4814 Fax: (07) 4755 3977

FOR FURTHER INFORMATION CONTACT: Your local ARC Service Centre on 131 557 Main Offices at: Pinkenba QLD • Sunshine VIC • Darwin NT • Dry Creek SA St Marys NSW • Launceston TAS • Forrestfield WA arcreo.com.au