ModularDesign |Combine Module | Deployed 2nd floor Wardroom/dinning
01
Hygiene area
02
Crew quaters 03 Crew quater 1 <031 Crew quater 2 <032 Crew quater 3 <033
Location Valles Mariner is Mariner Valleys, named after the Mariner 9 Mars orbiter of 1971– 72 which discovered it) . Valles Marineris is one of the largest canyons of the Solar System, surpassed in length only by the rift valleys of Earth.
1st floor
> 4,000 km (2,500 mi) long, 200 km (120 mi) wide and up to 7 km (23,000 ft) deep.
work area 04 laboratory 05
>offers a glimpse into Mars’ geologic and hydrologic past.” Vallis Marineris has recurring slope lineae that hint at liquid saltwater below the surface, says scientist and engineer Christopher Carr at MIT.
exercis 06
G floor Modular Design
Hatch | EVA Suits 07
>Detachable modules & Parts >Undeployed membranes
Laboratory 08 Technical Space 09
Project Marshaus [OxmanPrize Nomination / talk for Digitalfutures & Bauhaus-Universität Weimar] Location
Valles Marineris, Planet Mars
Year
2018
Type
Individual Master Thesis
Supervisor
Dr.HenrietteBier [TU.Delft/Hyperbody] SinaMostafavi [TU.Delft/Hyperbody] AngeloVermeulen [ TU Delft/Former NASA / ESA collaborator ]
Architecture Researchs
Throughout the few decades, technologies had been tremendously growing better,allowing future long term space exploration more accessible in a hostile environment. Mars Mission which was one of the convincing proposals over the last century for human space exploration due to the cogent evidence of elements to support life. Thus,a design solution is proposed to optimize a living habitat Marshaus by the aid of robotics constructions on Earth and Mars.The focus of this research will be developing the possibilities of 3d printing with robotic arm by injecting biomimicry literation which will be beneficial into 2 phases of architecture process in a modular form [Phase01-On Earth] developing lightweight architectural materials <manoeuvre membrane to [ Phase2-On Mars] ISRU in-situ resources utilization:Sand spray construction> extreme environment construction . Both phases will be synchronized and equally crucial as it will be advantageous with one another. In addition, the aim of modular system design is to be ready for future robotic mass production when the system is fully developed.
[1]
[2]
