ISOLATION POD BOQ

N.B.

The Entire Isolation Pod/ AIIR will be prefabricated in a factory, brought at site via trucks or advanced drones and installed on site via a simple adjustment by opening the side panels via a construction worker or advanced drone.

The mentioned prices might change as per the vendors, the provided prices are an estimate or taken from online study.

Particulars

Sr. No A

Flooring

1

False flooring - 300mm high Laminate Panels (Anti-static) Nominal size of floor panel : 600 mm x 600 mm Permissible thickness : 31 mm Square ness/Flatness : +/- 0.2mm Variation in height : +/- 0.2mm Ultimate Point Load (@Factor of safety=3) : 5.5KN/25 mm2 Ultimate UDL (@Factor of safety=3) : 35KN/m2 Air Leakage : 0.44 Lit/sec/m2 Fire Rating : Class ‘O’ Panel weight : 12 Kg Weight of system : 36 Kg/m2 Top sheet thickness : 0.5mm Bottom sheet thickness : 0.5mm Panel edge - Unifold Panel installation type : The panels shall NOT be screwed onto the pedestals but shall have a self locking system to ensure stability of the finished floor and to give easy access to the cavity below.

Mode of measurements:- As laid, No wastage to be added Antimicrobial Epoxy coating- 5 to 10mm thick

2

Graphic

Unit

Total Qty

Rate (₹/sq.ft.)

Amount

Sq.ft.

90

180

16200

Sq.ft.

90

60

5400

Sq.ft.

70

250

17500

Sq.ft.

70

60

4200

Sq.ft.

300

80

24000

colorfast epoxy coating system that provides an attractive, yet tough, abrasion and chemical resistant surface antimicrobial floors provides a highly effective level of broadspectrum protection from dangerous bacteria, fungi and algae over the long-term.

Mode of measurements:- As laid, No wastage to be added B

Ceiling

1

Gypsum Ceiling Work Providing & Fixing Classic Gypsum Ceiling which includes GypSerra™ Perimeter Channel is fixed along the perimeter of existing wall/ partition at 600mm centres. GypSerra™ Ceiling Angle is suspended at up to 1.5m height by fixing it to the Gyproc® soffit clit with Soffit Cleat and or Gyproc® Rawl PlugØ8x45mm creating 1220mm x 1220mm grid. GypSerra™ Intermediate channel is fixed to the GypSerra™ Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw .The GypSerra™ Ceiling Section is then fixed to the GypSerra™ Intermediate Channel with the help of Gyproc® Connecting Clip and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm thick Gypboard® Plain is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres.

Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. Knurled steel section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain steel section.

Cost should be inclusive of necessary cutouts for light fixtures, speakers, sprinklers, anyother services etc.

2

Mode of measurements:- As laid, No wastage to be added Antimicrobial Epoxy coating- 5 to 10mm thick colorfast epoxy coating system that provides an attractive, yet tough, abrasion and chemical resistant surface antimicrobial floors provides a highly effective level of broadspectrum protection from dangerous bacteria, fungi and algae over the long-term.

Mode of measurements:- As laid, No wastage to be added

C

1

PARTITION ,PANELING , CLADDING The rate to be inclusive of additional frame work for hinge fixing, track channels, over head storages, counter fixing, ceiling support etc. as per Design.

Full Height Plastic polycarbonate panels Polycarbonate provides excellent impact and weather resistance, compared to the average resistance in case of plastics.

Polycarbonate provides up to 89% light transmission

2

3

Polycarbonate is self-extinguishing Lightweight – less than half the weight of glass Providing and fixing 10mm thk Multiwall Plastic polycarbonate panels Mode of measurements:- Front Elevation, one side only.

Full Height Double Skin Gypsum Partition (100mm thk) Providing and fixing 100mm thk double skinned Gypsum partitions of specified thickness using all Saint Gobain - Gyproc specs, (REFER DETAIL TECHNICAL SPECS which are attached herewith) using Gypserra stud partition which includes double layer of tapered edge 12.5mm thick Gypboard Plain (conforming to IS 2095 Part 1:2011, ISI Certified board) of size 1219x2438mm on BOTH SIDE is screw fixed to 48x0.5mm Gypserra C-stud {Material-IS 513, Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at 610mm c/c in 50x0.5mm Gypserra™ {Material-IS 513,Y/S300Mpa, Finish - AZ150 (IS 15961)} floor and ceiling channel. and on the other side Floor & Ceiling channel is anchored to the floor & True ceiling using Gyproc® Rawl plug Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} at 600mm c/c in centerline. A Gypserra™ noggin channel {Material-IS 513,Y/S-300 Mpa, Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be provided at the horizontal joints of the two boards.First layer of Gyproc® boards to be screw fixed with Gyproc® drywall screws of 25mm at minimum spacing of 600mm at centre and 600mm at periphery. Second layer to be screw fixed Gyproc® drywall screws of 35mm at minimum spacing of 300mm at centre and 300mm at periphery.25mm rockwool slab of density 20kg/m³ shall be placed in metal framework. rockwool holding clip should be used to hold rockwool slab in its position.Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape or fiber tape.The junction of the partition with masonry & all penetration through the partition has to be treated with Hilti/Pyroplex fire and acoustic sealant.All other detailing and specifications to be followed as per approved Mode of measurements:- Front Elevation, one side only.

Transparent Polyster Fabric fabric that is specifically designed for sidewalls Vinyl laminated on a weft insertion scrim base of high tenacity filament polyester.

Architent WideSide® sidewall tent fabric offers a high gloss finish in both translucent Mode of measurements:- Front Elevation, one side only.

D

DOOR

1

Single fold Automatic Hermetic sealing door- 900mm wide

Sq.ft.

40

160

6400

Sq.ft.

180

60

10800

Nos.

2

50000

Sq.ft.

180

30

5400

R.ft.

260

120

31200

R.ft.

20

120

2400

100000

Providing & Fixing of 60mm thick panel finished with hard plastic laminate and flush anodised aluminium profiles When closed the unique patented track system allows the door to move down/in under its own weight. In conjunction with a continuous neoprene gasket it seals perfectly against the floor and frame.

Mode of measurements:- Numbers E

STRUCTURE/ FINISHING WORK

1

Vinyl sticker on partition (triangulated pattern) Providing & applying Vinyl sticker with matte finish of approved shade and color as per sample from vendors. It will be inclusive of surface, scrapping, sand papering, scaffolding, all materials and labour, taxes etc complete.

Mode of measurements:- Front Elevation, one side only.

Aluminium frame

2

Providing & applying steel frame of approved sample from vendors. It will be coveing the entire pod and provide skeleton for the panels to structurally hold together. The frame for the foldable panel will be of approved sample from vendors and will be composed for hinges and mechanism required for fluid transition and strength.

3

The framework is inclusive of sealants, safety tracks with rubber to maintain proper hygenic enclosed space Mode of measurements:- As laid, No wastage to be added Hinge Providing & applying steel structural hinge joining the foldable panels with the gypsum panel Mode of measurements:- As laid, No wastage to be added

F

STORAGE & FURNITURE

1

2

Round foldable table (1200 mm DIA) Providing and fixing Round foldable table of size 900mm deep mentioned finished with Corian on all Apron side, Work Desk finished in Laminate, Drawer Pedestal etc complete as per detailed drawing and 3D view.

Mode of measurements:- As laid, No wastage to be added Foldable chair (450X450 mm) Providing Foldable chair of size 450X450MM etc complete as per detailed drawing and 3D view.

Mode of measurements:- Numbers

G

MISCELLANEOUS

1

CCTV Camera Providing and fixing a CCTV for video surveillance.

Mode of measurements:- Numbers Hydrogen peroxide fumigation system Providing and fixing a automated hydrogen peroxide fumigation system

2

Sq.ft.

40

120

4800

Nos.

2

1500

3000

Nos.

2

4000

8000

Nos.

2

6000

12000

Nos.

2

6000

12000

Nos.

4

2000

8000

Nos.

2

30000

60000

Nos.

2

10000

20000

Nos.

2

2000

4000

Nos.

2

3000

6000

Nos.

2

4500

9000

hydrogen peroxide mist will turn on after the person enters the pod and will automatiically turn off as the person leaves

3

4

5

6

7

8

9

This process takes around 40secs to completely sanitize the visitor Mode of measurements:- Numbers UV light lamp/tunnel Providing and fixing a UV lamp inside the pod This will turn on to decontaminate the chamber Mode of measurements:- Numbers Portholes with gloves Providing and fixing fabric portholes with gloves which will allow a medical personel to undergo complete checkup of any visitor contained within the pod.

Mode of measurements:- Numbers Medical testing device Providing and fixing fabric a technologically advanced testing device which can detect wheter the visitor is showing related symptomes Mode of measurements:- Numbers Medical Exhausts with HEPA filters Providing and fixing Exhaust with HEPA filters which can maintain negative air pressure within the containment Mode of measurements:- Numbers Room pressure controller Providing and fixing room pressure controller within the containment Mode of measurements:- Numbers Zone/ Proximity sensor Providing and fixing a proximity sensor which can automate the function within a pod after detecting presence of visitor within the containment.

Mode of measurements:- Numbers Decorative LED Light fixture Nominal 300mm dia. Ceiling suspended dome shape decorative luminaire with regressed opal diffuser E27 base, LED A lamps, 900 delivered luminaire lumen o/p, 4000K CCT, >85 CRI, 50000 hrs. lamp life Mode of measurements:- Numbers GRAND TOTAL

3,70,300.00