Arrow Asia Lighting Solutions Guide 2011 by Arrow

Arrow Asia Lighting Group

Arrow Asia

LIGHTING Solution Guide

艾睿照明方案手册

Making Bright Ideas BrilliantSM lighting.arrowasia.com

June 2011

Table of Content 目录 Arrow Asia Lighting Linecard 艾睿照明产品线

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cree — Lighting Class High Power White LED 科銳 — 照明級高功率 LED

. . . . . . . . . . . . . . . . . . . . . . . . . .

Cree — High Power Lighting Class Single Chip LED - XML/XPC/XPE/XPG LED 科銳 — 照明級高功率晶片 LED - XML/XPC/XPE/XPG LED

1 2

. . . . . . . . . . . . . .

Cree — Lighting Class LED Array CXA20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 科銳 — 照明級 LED 陈列 CXA20

Cree — Lighting Class MX3, MX6 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 科銳 — 照明級 MX3，MX6 LED

Cree — ML Series Lighting Class 0.25W, 0.5W LED . . . . . . . . . . . . . . . . . . . . . . . . 科銳 — ML 系列照明级 0.25W，0.5W LED

Cree — High Power Multiple Chip MTG, MPL LED 科銳 — 高功率多芯片 MTG，MPL LED

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . .

LED Driver – Buck Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LED 驱动 – 降压整流器

LED Driver – Boost Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LED 驱动 – 升压整流器

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cree — High Power Multiple Chip MCE LED 科銳 — 高功率多芯片 MCE LED

Middle Voltage (12V or above) LED Driver 中端电压输入 LED 驱动 (12V 以上)

High Voltage LED Driver (Output Power Level <25W) AC 高压低功率的 LED 驱动 (25W 以下)

. . . . . . . . . . . . . . . . . . . . . . . .

High Voltage LED Driver (Output Power Level >25W) AC 高压大功率的 LED 驱动 (25W 以上)

. . . . . . . . . . . . . . . . . . . . . . . .

Lens / Optics for Cree High Power Lighting Class XP LED . . . . . . . . . . . . . . . . . . . . . . . Cree 照明级 LED XP 系列的光学元件

. . . . . . . . . . . .

Lens / Optics for Cree High Power Multiple Chip MCE, MX6, XML, MTG and MPL LED Cree 照明级多芯片 LED MCE、MX6、XML、MTG 和 MPL 系列的光学元件

LedLink — Lens / Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 雷笛克光学股份有限公司 — 透镜 / 光学

12-13

LEDIL — Asymmetric Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LEDIL — 非对称配光的透镜组合

14-15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 散热器

PCB / MCPCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 线路板 / 铝基板

LED Application: Estimating Junction Temperature from MCPCB LED 应用：由 MCPCB 估算结温的方法

. . . . . . . . . . . . . . . . . . . .

Arrow Lighting Application Solution – AC/DC Street Lamp Application . . . . . . . . . . . . . . . . . . . 艾睿照明应用方案 – AC/DC 路灯应用

. . . . . . . . . . . . . . . . . .

Arrow Lighting Application Solution – AC/DC TRIAC Dimming Indoor Lighting Application . . . . . . . . . . . . 艾睿照明应用方案 – AC/DC TRIAC 调光室內照明应用

TI — AC/DC LED Driver Solution – TPS92210DR Solution . . . . . . . . . . . . . . . . . . . . . . 德州仪器 — AC/DC LED 驱动方案 – TPS92210DR 方案

TI — AC/DC LED Driver Solution – LED Lighting Power Controller 德州仪器 — AC/DC LED 驱动方案 – LED 照明控制器

Microcontroller 微处理器

Arrow Lighting Application Solution – Street Lamp LED Driver Design 艾睿照明应用方案 – 路灯驱动方案

. . . . . . . . . . . . . . . . . . .

National Semiconductor — AC/DC LED Driver Solution – LM3445 Isolated Applications . . . . . . . . . . . . 美国国家半导体 — AC/DC LED 驱动方案 – LM3445 隔离式应用

National Semiconductor — AC/DC LED Driver Solution – LM3450 美国国家半导体 — AC/DC LED 驱动方案 – LM3450

. . . . . . . . . . . . . . . . . . .

National Semiconductor — AC/DC LED Driver Solution – LM3464 美国国家半导体 — AC/DC LED 驱动方案 – LM3464

. . . . . . . . . . . . . . . . . . .

NXP — AC/DC LED Driver Solution – SSL1523 Non Dimming LED Driver Solution for Indoor Lighting Application . . . . 恩智浦 — AC/DC LED 驱动方案 – SSL1523 非调光的 LED 室内照明应用

NXP — AC/DC LED Driver Solution – SSL2101 TRIAC Dimming for Retrofit Application . . . . . . . . . . . . . 恩智浦 — AC/DC LED 驱动方案 – SSL2101 可控硅调光用于传统灯具升级改造

STMicroelectronics — AC/DC LED Driver Solution – HVLED805 . . . . . . . . . . . . . . . . . . . . 意法半导体 — AC/DC LED 驱动方案 – HVLED805

STMicroelectronics — AC/DC LED Driver Solution – VIPER15 / VIPER25 . . . . . . . . . . . . . . . . . 意法半导体 — AC/DC LED 驱动方案 – VIPER15 / VIPER25

Richtek — MR16/AR111 Solutions with RT8470 Buck, RT8450 Boost/Buck-Boost and Two Stage Solutions with RT8465 立錡科技 — MR16/AR111 方案，RT8470 降压，RT8450 升压/升降压，以及 RT8465 两级式方案

Infineon — AC/DC LED Driver Solution – 120W LED Driver Solution for Streetlighting Application . . . . . . . . 英飞凌 — AC/DC LED 驱动方案 – 120W LED 路灯照明驱动方案

SHINRY — AC/DC LED Driver Module – T8 Tube LED Driver . . . . . . . . . . . . . . . . . . . . . 欣锐特 — AC/DC LED 驱动模块 – T8 日光灯管驱动

. . . . . . . . . . . . .

SHINRY — AC/DC LED Driver Module – LED Display Driver . . . . . . . . . . . . . . . . . . . . . . 欣锐特 — AC/DC LED 驱动模块 – LED 屏显示驱动

RECOM — High Power DC/DC LED Driver Module (RCD Series) . . . . . . . . . . . . . . . . . . . . RECOM — 大功率 DC/DC LED 驱动模块 (RCD 系列)

RECOM — Low Power AC Input Driver Module (RACD Series) . . . . . . . . . . . . . . . . . . . . . RECOM — 低功率 AC 输入 LED 驱动模块 (RACD 系列)

RECOM — High Power AC Input LED Driver Module (RACD60 Series) . . . . . . . . . . . . . . . . . . RECOM — 大功率 AC 输入 LED 驱动模块 (RACD60 系列)

TE Connectivity — SMT Poke In Lighting Connector . . . . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — SMT 插入式照明连接器

TE Connectivity — Micro Poke-In Wire SSL Connector TE Connectivity — 微型插入式 SSL 连接器

. . . . . . . . . . . . . . . . . . . . . . .

TE Connectivity — Inverted SMT Thru Board Connector . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — SMT 反向通板连接器

TE Connectivity — IDC SSL Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — IDC SSL 连接器

. . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

TE Connectivity — Screw Down Jumper . . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — 螺丝旋紧式板对板电气连接跨接器

TE Connectivity — G13 SMT Connector and End Cap Cover . . . . . . . . . . . . . . . . . . . . . TE Connectivity — G13 灯头 SMT 连接器及端盖

TE Connectivity — SlimSeal SSL Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — SlimSeal SSL 连接器

TE Connectivity — Circular Lighting Sealed Connector TE Connectivity — 经济型圆形防水连接器

. . . . . . . . . . . . . . . . . . . . . . .

TE Connectivity — CoolSplice Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — CoolSplice 连接器

TE Connectivity — Solderless LED Socket, Type CM . . . . . . . . . . . . . . . . . . . . . . . . TE Connectivity — 无焊接 LED 底座，CM 型

SHINRY — AC/DC LED Driver Module – LED Street Lamp, Tunnel Light CC Driver 欣锐特 — AC/DC LED 驱动模块 – LED 路灯、隧道灯恒流驱动

TE Connectivity — Hermaphroditic Blade and Receptacle Connector TE Connectivity — 插片插座一体式板对板连接器

TE Connectivity — Mini Hermaphroditic Blade and Receptacle Connector TE Connectivity — 小型化插片插座一体式板对板连接器

Arrow Asia Lighting

LINECARD 艾睿照明产品线 HP/HB LED Cree 科銳 ORSAM 欧司朗 Everlight 亿光电子 Avago Technologies 安华高科技

Heat Sink TT Electronics (IRC)

LED Driver NXP Semiconductors 恩智浦半导体 Texas Instruments 德州仪器 National Semiconductor 美国国家半导体 STMicroelectronics 意法半导体 Cypress Semiconductor 赛普拉斯 Infineon Technologies 英飞凌科技 International Rectifier 国际整流器 Linear Technology 凌力尔特 Fairchild Semiconductor 飞兆半导体 ON Semiconductor 安森美半导体 Richtek 立锜科技 Micrel 麦瑞 Diodes 达拉斯

Lens / Optics Fraen Khatod Ledil LedLink 雷笛克光學

Microcontroller Texas Instruments 德州仪器 Freescale Semiconductor 飞思卡尔半导体 NXP Semiconductors 恩智浦半导体 Renesas 瑞萨电子 Cypress Semiconductor 赛普拉斯 Atmel 爱特梅尔

By Product Category PCB 线路板 TT Electronics (IRC) MCPCB 铝基板 FR4 with Metalbase

Passive Components TE Connectivity 泰科电子

Arrow Asia

Cree — Lighting Class High Power White LED 科銳 — 照明級高功率 LED

LIGHTING Solution Guide

This is specially designed for promoting HP-LEDs. Cree is Arrow Asia's focus LED line for the brightest white color HP-LEDs when driving @350mA or higher. The high power LED series from Cree include XML, industry's highest performance with single die, XPC/XPE/XPG LED, XRE/XRC, lighting class MX and ML series and multiple chip LED MCE, MPL and MTG LED.

BENEFITS (优点)

FEATURES (特性)

• Industrial leading luminous ﬂux and efﬁciency • 产业界领先的亮度和光效 • Full portfolio of color & white LEDs • 全系列颜色及白光LED • ANSI-compatible chromaticity bins • 兼容ANSI标准的色温分档 • Low thermal resistance & high max. junction • temperature 极低热阻，极高工作节温 • • Uniform small source 统一的小尺寸光源 • • Low forward voltage 低正向压降 • • Symmetric design: matching optical & mechanical • centers 完全对称的封装设计 • • Electrically neutral thermal path 热电分离 • L70 lifetime up to 50,000 hours 5万小时的L70寿命

XPG

以下内容是为推广高功率LED所设。Cree大功率白光LED是艾睿亚洲重点推广的一条照明产品线，包含有业界单晶片光效最好的XML，XPC/XPE/XPG/XRE/XRC，还有多芯片的MX，ML系列及 MCE，MPL，MTG。

XPE

XPC

Max.

XPE-HEW

Max.

APPLICATIONS (应用)

Enable low total system cost through low power and heat requirements 低功率和热的要求能减少系统成本 Allow XLamp LEDs to replace conventional lighting 可替换传统的照明光源 Can be tailored towards speciﬁc applications 可满足某些特定应用 Good uniformity across end products 产品一致性好 Low inventory of LEDs for matching 可低库存运作 Ease of thermal design and secondary 簡易光学和導热设计 Lower power consumption 更低的功率损耗 Extends battery life in portable lighting 可延长电池寿命 Enhance ruggedness & reliability of LED in all environments 在各种环境中具有高可靠度

XML

Max.

MCE

Max.

MPL

Max.

MTG

Max.

6°C/W 1000mA 2.5°C/W 3000mA 3°C/W

700mA

N/A

SUPPLIER (供应商)

MX3

Max.

Max. Thermal Thermal Thermal Thermal Thermal Thermal Thermal Thermal Thermal Driving Driving Driving Driving Driving Driving Driving Driving Resistance Current Resistance Current Resistance Current Resistance Current Resistance Current Resistance Current Resistance Current Resistance Current Resistance 6°C/W 1500mA 9°C/W 1000mA 12°C/W 500mA

• Outdoor lighting: parking area, roadway, pedestrian 室外照明: 停车场，道路，人行道 • Industrial Lighting 工业照明 • Indoor lighting: downlights, accent lights 室内照明: 下射灯 • Retail display lighting: display case, refrigerated display 零售橱柜展示照明 • Architectural and landscape lighting 景观照明 • Portable and personal lighting 便携/个人照明 • Emergency-vehicle lighting 应急车辆照明 • Dental and medical 牙科和医学照明

250mA 1.5°C/W 4000mA 11°C/W

MX6

ML-E

Max. Max. Thermal Driving Driving Current Resistance Current

MX3A: 400mA

5°C/W

ML-B

Max.

Thermal Thermal Driving Driving Resistance Current Resistance Current

MX6A: 1000mA 11°C/W 500mA 25°C/W 175mA

Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf @ Viewing Typ. Vf 1100mA Typ. Vf Angle 150mA Angle 80mA Angle Angle 350mA Angle 350mA Angle 350mA Angle 350mA Angle 700mA Angle 350mA Angle 150mA Angle & 85°C Angle 2 4 3.2V 125° 25V (per 125° 110° 5.6V 3.0V 115° 3.2V 110° 3.4V 3.2V 120° 3.3V 125° 2.9V 120° MX3A:3.7V 120° MX6A:3.3V 120° 120° 3.0V 125° @350mA @300mA string) (per LED)

Dimension: 3.45 x 3.45

* Remark 1 – MX3S: 150mA

Dimension: 3.45 x 3.45

Remark 2 – MX3S: 10.7V@115mA

Dimension: 7.0 x 9.0

Dimension: 5.0 x 5.0

Dimension: 3.45 x 3.45

Remark 3 – MX6S: 175mA

Dimension: 12.15 x 13.15

Dimension: 9.1 x 9.1

Dimension: 5.0 x 6.5

Dimension: 3.5 x 3.5

Dimension: 5.0 x 6.5

Dimension: 3.5 x 3.5

Remark 4 – MX6S: 20.0V@60mA

Cree — High Power Lighting Class Single Chip LED - XML/XPC/XPE/XPG LED 科銳 — 照明級高功率晶片 LED - XML/XPC/XPE/XPG LED XML and XP LED are LEDs which combines with lighting class performance and reliability and much smaller foot print compare with XR LED，especially XP LED. The new launched XML LED delivers unprecedented levels of light output and efﬁcacy for a single die LED which is a perfect ﬁt on general illumination application.

XML和XP系列集成了照明级别的特性和高可靠性，但尺寸要比XR系列的小，尤其是 XP LED 。XML是最新推出的单芯片LED，它能输出前所未有的亮度和光效，可完美的应用于通用照明。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• High light intensity output 极高的光输出 • Small package size 5.5 x 3.45 x 3.45 小尺寸 • ANSI-compatible chromaticity bins 兼容ANSI标准的色温分档 • XP High CRI and Outdoor products XP系列高CRI和适于户外的产品 • Electrically neutral thermal path 热电分离 • Low thermal resistance 低热阻

• • • • • •

• • • •

Technical Performance (lm) 技术参数 (流明) Type 种类 Color 颜色 Color Temp. (°K) 色溫 Wavelength (nm)波长 Current (mA) 駆动电流

High-bay lighting 工矿灯 High end portable 高端便携应用 Light bar 灯条 Outdoor lighting such as street light 路灯 • Indoor Retroﬁt 室内照明升级改造 • Area lighting 区域照明

SUPPLIER (供应商)

Cree Lighting Class XP/XML Series LED

Supplier 供应商 Part No. 产品编号

High light intensity output 高亮度输出 Small size for small form factor 小尺寸 Low power consumption 低功率损耗 Increased energy saving & efﬁciency 高效节能 Fits various application 适合各种应用 Ease of thermal and optic design 簡易光学和导热设计

Cool White (冷白)

Neutral White (中性白)

Warm White (暖白)

Color (颜色)

XMLAWT- XPCWHT- XPEWHT- XPEHEW- XPGWHT- XMLAWT- XPEWHT- XPEHEW- XPGWHT- XMLAWT- XPEWHT- XPEHEW- XPGWHT- XPEAMB- XPERED00-0000- L1-0000- L1-0000- L1-0000- L1-0000- 00-0000- 01-0000- 01-0000- 01-0000- 00-0000- L1-0000- L1-0000- L1-0000- L1-0000- L1-00000000T6051 00C01 00F01 00H51 00H51 0000LT50F4 00EC2 00FC2 00GC2 0000LT30F7 00BE7 00EE6 00EE6 00601 00601 min. 280 min. 100 min. 122 @700mA, @350mA, @350mA, full bins full bins full bins

XML

min. 139 min. 139 min. 260 min. 114 @350mA, @350mA, @700mA, @350mA, 4bins 12bins full bins full bins (ANSI) (ANSI)

XP-C series XP-E series XP-E series XP-G series

XML

50008300

500010000

500083000

500010000

Neutral White 37005000

N/A

Amber Color min. 122 min. 130 min. 220 min. 93.9 min. 114 min. 114 min. 62 @350mA, @350mA, @700mA, @350mA, @350mA, @350mA, @350mA, 12bins 12bins 16sub bins 16sub bins 16sub bins 16sub bins A2 & A3 (ANSI) (ANSI) (ANSI) (ANSI) (ANSI) (ANSI) color bins

XP-E series XP-E series XP-G series

XML

XPEBLU- XPEGRNL1-0000- L1-000000201 00D01

Red color Blue color Green color min. 62 min. 39.8 min. 107 @350mA, @350mA, @350mA, R2 & R3 B3,B4,B5,B6 G2,G3,G4 color bins color bins color bins

XP-E series XP-E seriesXP-G series XP-E series XP-E series XP-E series XP-E series

Outdoor White 40005300

Outdoor White 26005300

Outdoor White 40005300

Warm White 26003700

Amber

Red

Blue

Green

N/A

585-595

620-630

465-485

520-535

350-3000 350-500 350-1000 350-1000 350-1500 350-3000 350-1000 350-1000 350-1500 350-3000 350-1000 350-1000 350-1500 350-500

350-700

350-1000 350-1000

Cool White Cool White Cool White Cool White Cool White

Viewing Angle (q)角度

125

110

115

120

125

115

120

125

115

120

125

130

Luminous Flux(lm) 光通量 1K pcs Reference Price 参考价格

280+

100+

122+

139+

260+

114+

122+

130+

220+

93.9+

114+

62+

39.8+

107+

5.13

1.20

1.84

2.36

3.16

3.87

1.64

1.71

3.29

5.2

1.91

2.36

3.29

1.87

2.13

2.67

* NOTE: CREE could provide XP/XML series LED based on ANSI and different CRI grade. Details please contact with Arrow Asia lighting sales. 注: CREE可以按ANSI BIN区和不同CRI指标等级的要求提供XP/XML系列的LED产品。具体事项请和艾睿亚洲的照明销售代表联系。

Cree — Lighting Class LED Array CXA20 科銳 — 照明級 LED 阵列 CXA20 The Cree CXA20 brings lighting-class reliability and performance to easy-to-use LED arrays. CXA20 expands Cree's lighting-class leadership to multi-die, high ﬂux arrays. With XLamp lighting-class reliability, a wide viewing angle, uniform light output, and industry-leading chromaticity binning in a 16mm diameter optical source, CXA20 continues Cree's history of segment-focused product innovation in LEDs for lighting application.

Cree CXA20 LED是具有照明级可靠性和性能的多晶片封装，高流明输出阵列。16mm直径光源，便于应用，并带给用户Xlamp的照明级高可靠性，宽视角，均匀的光输出和业界领先的色温分BIN 技术。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• 4-step EasyWhite bins 4步EasyWhite分档 • Forward Voltage: 42V 正向电压42V • Max drive current: 1000mA 最大驱动电流1000mA • 120º viewing angle 视场角120º • Top-side solder connections 顶部焊盘连接 • Thermocouple attach point 测温点 • Screw down attachment 螺丝装嵌

• • • • • •

• Light bulbs 灯泡 • Downlighting 下射灯 • Indoor/ Residential lighting 室内/住宅照明 • Recessed ﬁxtures lighting 橱柜照明 • Area lighting 区域照明

High light intensity output 高亮度输出 One light source 单一光源 Easy assembly 易于安装 No multiple shadows 无鬼影 Unlimited ﬂoor life at ≤30ºC / 85% RH Good LED-to-LED color consistency 色温一致性好

SUPPLIER (供应商)

Xlamp CXA20 LED

Supplier 供应商

2 Step MacAdam

4 Step MacAdam

Tj=85ºC, ANSI/4 bins

CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011CXA2011Part No. 产品编号 000000000000000000000000000000000000000000000000000P00G027H 000P00G030H 000P00G035H 000P00H040H 000P00H050H 000P00G027F 000P00G030F 000P00G035F 000P00H040F 000P00H050F 000P00G00E7 000P00J00E3 Technical Performance (lm) 技术参数 (流明) Color 顏色 Color Temp.(°K) 色溫 1K pcs Reference Price 参考价格

min. 780 @270mA & Tj=85°C Warm White

min. 1040 @270mA & Tj=85°C Cool White

5000

3000

5000

11.33

min. 780@270mA

min. 900@270mA

min. 780@270mA

min. 900@270mA

Warm White

Neutral White

Cool White

Warm White

Neutral White

2700

3000

3500

4000

5000

2700

3000

3500

4000

14.8

14.33

14.8

14.33

12.33

Cree — Lighting Class MX3,MX6 LED 科銳 — 照明級 MX3，MX6 LED Xlamp MX series LED provide the proven lighting class performance and reliability of Cree Xlamp LED in a flat top PLCC package. It continuous Cree's innovation history on LED with wide viewing angle, unlimited floor life, uniform color output with no secondary optics and electrically isolated thermal path.

MX6系列LED采用平顶型PLCC封装，具有CreeXlamp系列LED业已证明的照明级光效和可靠性。它延续了Cree在LED照明应用领域的创新历史，产品具有视角宽，常温，常湿潮湿等级不受限，无需二次光学元件就能提供均匀的光输出，以及热电分离的特点。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Small package size 小尺寸 • Unlimited ﬂoor life at ≤30ºC / 85% RH 车间寿命：≤30ºC / 85% RH • Lighting class performance 照明级光效 • ANSI-compatible chromaticity bins 色温分档符合ANSI标准

• • • •

• Light strip, T5/T8 ﬂuorescent tube replacement T5/T8荧光灯管的替代 • Indoor/Residential lighting 室内/住宅照明 • Portable lighting - torch 便携式照明 - 手电筒 • Street lighting 路灯 • Retroﬁt lighting 传统照明升级改造

Xlamp MX-6

Supplier 供应商 Part No. 产品编号 Technical Performance (lm) 技术参数 (流明) Color 顏色 Color Temp.(°K) 色溫 1K pcs Reference Price 参考价格

High light intensity output 高亮度输出 Small size for small form factor 小尺寸 Low power consumption 低功率损耗 Increased energy saving 节能

Xlamp MX-6S

Xlamp MX-3

SUPPLIER (供应商) Xlamp MX-3S

MX6AWT-A1- MX6AWT-A1- MX6AWT-A1- MX6SWT-A1- MX6SWT-A1- MX6SWT-A1- MX3AWT-A1- MX3AWT-A1- MX3AWT-A1- MX3SWT-A1- MX3SWT-A1- MX3SWT-A10000-000E51 0000-000CE5 0000-000BE7 0000-000G51 0000-000EE5 0000-000DE7 0000-000E51 0000-000CE5 0000-000BE7 0000-000E51 0000-000CE5 0000-000BE7 min. 114 @300mA, full bins

min. 100 @300mA, full bins

min. 93.9 @300mA, full bins

min. 130 @60mA, full bins

min. 114 @60mA, full bins

min. 107 @60mA, full bins

min. 114 @350mA, full bins

min. 100 @350mA, full bins

min. 93.9 @350mA, full bins

min. 114 @115mA, 4 bins

min. 100 @115mA, 4 bins

min. 93.9 @115mA, 4 bins

Cool White 5000-8300

Warm White 3700-4300

Warm White 2600-3700

Cool White 5000-8300

Warm White 3700-4300

Warm White 2600-3700

Cool White 5000-8300

Warm White 3700-4300

Warm White 2600-3700

Cool White 5000-8300

Warm White 3700-4300

Warm White 2600-3700

1.32

1.11

1.20

1.11

Cree — ML Series Lighting Class 0.25W, 0.5W LED 科銳 — ML 系列照明级 0.25W，0.5W LED The Cree ML series LED brings lighting-class reliability and performance to 1/4-watt, 1/2-watt LEDs. ML series expands Cree's lighting-class leadership to linear and distributed lighting applications. With XLamp lighting-class reliability, a wide viewing angle, uniform light output, and industry-leading chromaticity binning in a 3.5mm×3.5mm package, ML continues Cree's history of segment-focused product innovation in LEDs for lighting application.

FEATURES (特性)

• ANSI-compliantible sub-bins Bin兼容ANSI标准并做了细分档 • Uniform chromaticity proﬁle 一致的色温分布 • Low thermal resistance 低热阻 • High light intensity output 高亮度输出 • High reliability and long life 高可靠性，长寿命 • Electrically neutral thermal path 热电分离

BENEFITS (优点)

• • • • •

Lighting class LED 真正的照明级LED Better color consistency 更好的色温一致性 Low power consumption 低功率损耗 Increased energy saving 节能 Very small ∆CCT over viewing angle 不同视场角内的色温一致性好

APPLICATIONS (应用)

• • • • • • •

General lighting 通用照明 Linear lighting 线形灯 LED light bulbs LED灯泡 Fluorescent retroﬁts 荧光灯管替代 Retail-display lighting 商照 Advertising box 广告灯箱 Panel lighting 平板照明

Xlamp ML-B LED

Supplier 供应商

Cree ML系列是具有照明级可靠性和性能的1/4W，1/2W LED。ML将 Cree照明领先的地位扩展到线性和平板照明领域。在3.5mm×3.5mm 的封装尺寸上带给用户Xlamp的照明级高可靠性，宽视角，均匀的光输出和业界领先的色温分BIN技术。

SUPPLIER (供应商)

Xlamp ML-E LED

Part No. 产品编号

MLBAWT-A10000-000W51

MLBAWT-A10000-000VE5

MLBAWT-A10000-000WE5

MLBAWT-A10000-000VE7

MLBAWT-A10000-000WE7

MLEAWT-A10000-000351

MLEAWT-A10000-000451

MLEAWT-A10000-0002E5

MLEAWT-A10000-0003E5

MLEAWT-A10000-0001E7

MLEAWT-A10000-0002E7

Technical Performance (lm) 技术参数 (流明)

min. 23.5 @80mA

min. 18.1 @80mA

min. 23.5 @80mA

min. 18.1 @80mA

min. 23.5 @80mA

min. 45.7 @150mA

min. 51.7 @150mA

min. 39.8 @150mA

min. 45.7 @150mA

min. 35.2 @150mA

min. 39.8 @150mA

Color 顏色 Color Temp.(°K) 色溫

Cool White 5000-8300

Warm White 3700-4300

Warm White 2800-3200

Cool White 5000-8300

Warm White 3700-4300

Warm White 2800-3200

175

500

23.5

18.1

23.5

18.1

23.5

45.7

39.8

45.7

35.2

39.8

0.29

0.32

0.33

0.32

0.38

0.57

0.61

0.60

0.61

0.60

0.61

Max.Current (mA) 駆动电流 Luminous Flux(lm) 光通量 1K pcs Reference Price 参考价格

Arrow Asia

Cree — High Power Multiple Chip MTG, MPL LED 科銳 — 高功率多芯片 MTG，MPL LED

LIGHTING Solution Guide

MTG-EZW, MPL-EZW LED maximizes lumen density, eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver consistent color and high efficacy light output in a new, compact, multi-die package. Reduce LED-to-LED color variation to within a 2-step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 color region.

MTG-EZW，MPL-EZW LED 系列突破了传统的分档标准，提高了流明密度，在一个崭新紧凑的多晶片封装上为灯具制造商实现了颜色一致和高效的光输出。将LED和LED之间的色温变化区域减小到2步麦克亚当椭圆之内，比相应的ANSI C78.377所规定的区域小了94%。

FEATURES (特性)

BENEFITS (优点)

• Cree EasyWhite color temperatures EasyWhite 色温技术 • High lumen density 高流明密度 • Electrically neutral thermal path 热电分离 • MTG 85ºC binning MTG在85ºC结温下分BIN

• Single Point-Source of light 单点光源 • MR, PAR and retroﬁt bulbs 传统灯具的升级改造替换 • New levels of easy to use • Commercial/residential directional lighting 方便使用的崭新平台商业照明或家居照明 • Color consistency 色温一致性 • General indoor/outdoor illumination • Reduces LED system complexity 通用室内外照明减小系统的复杂性

Cree MTG LED

Supplier 供应商

Part No. 产品编号

APPLICATIONS (应用)

SUPPLIER (供应商)

Cree MPL LED

2-Step MacAdam

4-Step MacAdam

2-Step MacAdam

4-Step MacAdam

MTGEZW- MTGEZW- MTGEZW- MTGEZW- MTGEZW- MTGEZW- MTGEZW- MTGEZW- MPLEZW- MPLEZW- MPLEZW- MPLEZW- MPLEZW- MPLEZW- MPLEZW- MPLEZW00-0000- 00-0000- 00-0000- 00-0000- 00-0000- 00-0000- 00-0000- 00-0000- A1-0000- A1-0000- A1-0000- A1-0000- A1-0000- A1-0000- A1-0000- A1-00000000 0000 0000 0000 0000 0000 0000 0000 0B00 0B00 0B00 0B00 0B00 0B00 0B00 0B00 C027H C030H C035H E040H C027F C030F C035F E040F F027H G030H G035H H040H F027F G030F G035F H040F

Technical min. 480lm min. 520lm min. 520lm min. 560lm min. 480lm min. 520lm min. 520lm min. 560lm min. 800lm min. 800lm min. 800lm min. 1000lm min. 800lm min. 800lm min. 800lm min. 1000lm Performance (lm) @1100mA @1100mA @1100mA @1100mA @1100mA @1100mA @1100mA @1100mA @150mA @150mA @150mA @150mA @150mA, @150mA, @150mA, @150mA, 技术参数 (流明) 27F bins 30F bins 35F bins 30F bins & Tj=85ºC & Tj=85ºC & Tj=85ºC & Tj=85ºC & Tj=85ºC & Tj=85ºC & Tj=85ºC & Tj=85ºC Color Temp.(°K) 色溫 3000 3500 4000 2700 3000 3500 4000 2700 3000 3500 4000 2700 3000 3500 4000 2700 1K pcs Reference Price 10.53 10.53 9.60 10.53 9.60 9.60 9.60 9.60 17.89 17.89 17.89 17.89 16.12 16.12 16.12 16.12 参考价格

Cree — High Power Multiple Chip MCE LED 科銳 — 高功率多芯片 MCE LED Cree MCE multi chip LED is a lighting-class multi-chip LED which build in 4 LED Cree MCE 系列是多芯片的照明级LED，它在与XRE系列LED 相同封装尺寸上集成 chip that provides 4 times the flux of the Xlamp XR-E LED in the same footprint. 了4个LED芯片，因此能提供4倍于XRE的流明输出。相对于单芯片LED，它能减小 Compare with single die LED, it reduces the system complexity and part counts 系统复杂程度和减小元件数量，可适用于多种照明应用及牙齿固化，医学照明。 and fit various lighting application and dental medical application.

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Industry ﬁrst lighting class LED 业界领先的照明级LED • Small package size 7.0 x 9.0 8 pins 小尺寸 • Cree EasyWhite color temperatures EasyWhite色温技术 • High light intensity output 高亮度输出 • Individually addressable LED chip 芯片独立连接 • Low thermal resistance (3C/W) 低热阻 • Electrically neutral thermal path 热电隔离

• • • • • •

Cree MCE LED

Supplier 供应商

Part No. 产品编号 Technical Performance (lm) 技术参数 (流明) Color Temp.(°K) 色溫 Wavelength (nm) 波長 Viewing Angle (q) 角度 1K pcs Reference Price 参考价格

Supplier 供应商

Part No. 产品编号 Technical Performance (lm) 技术参数 (流明) Color Temp.(°K) 色溫 Wavelength (nm) 波長 Viewing Angle (q) 角度 1K pcs Reference Price 参考价格

High light intensity output 高亮度输出 Small size for small form factor 小尺寸 Low power consumption 低功率损耗 Increased energy saving 节能 Fits various application 适用于多种应用 Ease of thermal and optic design 易于热和光学设计 • Reduce total system cost 减少系统成本

2 Step MacAdam MCEEZW-A100000000J027H

MCEEZW-A100000000J030H

MCEEZW-A100000000K035H

MCEEZW-A1- MCEEZW-A1000000000000K040H 0000J027F

min. 320lm @350mA

min. 370lm @350mA

2700

3000

3500

N/A

110

10.86

10.43

General lighting 通用照明 High end portable 高端便携式照明 Street light 路灯 Retroﬁt 传统灯具升级改造 Area lighting 区域照明 Dental and medical 牙科和医学照明 • Portable projector 迷你投影

Warm White (暖白) 4 Step MacAdam

SUPPLIER (供应商)

Standard Warm White

MCEEZW-A100000000J030F

MCEEZW-A100000000K035F

MCEEZW-A1- MCE4WT-A2000000000000K040F 000GE7

MCE4WT-A20000000HE7

MCE4WT-A20000000JE7

min. 320lm @350mA

min. 370lm @350mA

min. 240lm @350mA

min. 280lm @350mA

min. 320lm @350mA

4000

2700

3000

3500

N/A

4000

2600-3700

N/A

110

N/A

110

11.71

10.86

8.16

7.89

10.43

9.71

6.58

7.37

Cree MCE LED Neutral White (中性白)

Cool White (冷白)

MCE4WT-A2- MCE4WT-A2- MCE4WT-A2- MCE4WT-A20000000000000000000JE4 000KE4 000K01 000M01

Color (颜色) MCE4CT-A2-0000-00A4AAAB1

MCE4CT-A2-0000-00A5AAAA1

Red

Green

Blue

Neutral White

Red

Green

Blue

Cool White

min. 30.6lm @350mA

min. 67.2lm @350mA

min. 8.2lm @350mA

min. 80lm @350mA

min. 30.6lm @350mA

min. 67.3lm @350mA

min. 8.2lm @350mA

min. 100lm @350mA

N/A

3700-4300

N/A

5700-7000

520-535

450-465

N/A

620-630

520-535

450-465

N/A

min. 320lm @350mA

min. 370lm @350mA

min. 430lm @350mA

3700-5000

5000-10000

N/A

620-630

110

115

6.58

7.89

6.84

7.63

9.21

LED Driver – Buck Converter LED 驱动 – 降压整流器

Buck Converter can drive One Cree XRE and XPE LED from 3 Ni-NH batteries or 1 Li-ion battery for battery power application such as torch and portable. It can provide 3V to 4V output voltage and up to 1000mA output current. State of art controller reduce circuit components count as well as simpliﬁed circuit design.

FEATURES (特性)

• • • • • •

在一些使用三节镍氢电池或者锂电的应用中，如手电筒和其他便携设备可以使用降压电路来驱动单颗Cree XRE或 XPE LED。它可以提供3V至4V的驱动电压和高达1000mA的驱动电流。一个设计得好的控制器也可以做得非常简单。

BENEFITS (优点)

High efﬁciency, up to 95% 效率高达95% Buck / Boost design 升降压设计 High current output 大电流输出 SMD reduce product size 贴片工艺减小尺寸 Low input voltage operation 低输入电压工作 Low start up voltage and high current 低启动电压和大电流

• • • •

APPLICATIONS (应用)

Enable long battery life 延长电池寿命 Parallel / Serial LED connection 串/并联LED Low components count 元件数量少 High frequency for compact size 高频小尺寸设计

• • • • •

Torch 手电筒 Single-LED driver module 单LED驱动模组 Flashlight 闪光灯 Bike lighting 自行车灯 Portable projector 便携式投影仪

SUPPLIERS (供应商)

Supplier 供应商

ON Semi NCP3065 NCP5030 (buck conﬁguration) (buck & boost)

Part No. 产品编号

TPS6210X

TPS63000 buck & boost

LM3401

LM3405A

NCP1529

Min. Input Voltage 最少输入电压

2.5V

1.8V

4.5V

2.7V

Max. Input Voltage 最大输入电压

5.5V

35V

22V

5.5V

Max. Output Current 最大输出电流

500mA

up to 1200mA

Output Voltage 输出电压

0.8V to 8V

1.2V to 5.5V

up to 35V

Est. Efﬁciency 效能

up to 90%

up to 96%

Switching Frequency 开关频率

2.5MHz Max

Feedback Voltage 反馈电压

800mV

Built-in MOSFET 内置 MOSFET

Diodes

Fairchild

Infineon

ZXLD1322

LTC3453 buck & boost

LTC3454 buck & boost

FAN5307

ILD4035

2.7V

2.5V

2.7V

2.5V

4.5V

40V

5.5V

15V

5.5V

42V

up to 1A

up to 1.5A

up to 0.9A

up to 700mA

500mA

up to 300mA

350mA

up to 20V

0.9V to 3.9V

3V to 40V

3V to 5.5V

3V or above

5.15V

0.7 to Vin

3V to 40V

85 to 92%

85 to 90%

up to 95%

up to 85%

> 85%

up to 90%

up to 95%

1.25MHz

1.5MHz

1.6MHz

1.7MHz

150KHz

700KHz

350KHz

1MHz

500KHz

500mV

200mV

205mV

0.6V

235mV

200mV

10.5mV

Fix output

0.5V

118mV

Yes (300 mOhm NMOS)

Yes (HS 0.4 Ohm, LS 0.3 Ohm)

Yes (Bipolar Power Transistor)

Yes (100 mOhm)

Yes (Built-in BJT)

Yes (PMOS 0.3 Ohm / NMOS 0.25 Ohm)

Yes (PMOS 170 mOhm / NMOS 130 mOhm)

Yes (PMOS 0.53/NMOS 0.43)

Yes (Bipolar Power Transistor)

Yes (PMOS Yes (not 0.5/0.8 NMOS specify Rdson) - 0.3/0.6)

Component Count 零件总数

Package 封装

SO-8

QFN-10

MSOP

SOT23

TSOP-5

SOIC8 or DFN-8

DFN-12

DFN1443

QFN-16

DFN-10

SOT23-5

SC74-6-4

1K pcs Reference Price (USD)** 参考价格

1.60

1.50

0.70

1 to 1.10

0.25

0.45

0.85

1.37

1.91

2.01

0.99

0.45

Remark 附录

4 selectable frequency (TPS6210x)

Integrated Syn Rectiﬁer

High switching current up to 1.5A

Buck / Boost achieved by Syn Rect H-bridge

Buck / Boost, integrated BJT

Buck Boost achieved by Syn H-bridge

Integrated MOSFET for Syn Rect

Buck

Drives up to Auto switch to 1A with more Buck / Boost, than 1 LED, integrated Buck Controller OCP and MOSFET for thermal Syn Rect shutdown

* Blue highlight means best in class. 标示蓝色的表示在系列中是最好的。 ** 1K pcs order price is for reference only. Please consult Arrow sales representative for quotation. 1K 报价只作参考，如阁下对产品有兴趣，请与客户代表联络再作详细报价。

LTC

Arrow Asia

LED Driver – Boost Converter LED 驱动 – 升压整流器

LIGHTING Solution Guide

Boost Converters can be designed to drive more than 1 HP XPE/XPG LED in series, and multi-chip MCE LED with chip connected in series from a 9V battery or 6xAA size battery pack. All the converters can provide a simpler and high current output to drive high-power LEDs in voltage step-up application. Some controllers can access very low input voltage and oscillate at high frequency which reduce size of LED driver, those features fit for size limited battery powered lighting application such as in torch or headlamp. Constant current driven features is recommended for maintain constant lumen and color temp output throughout LED's life.

升压电路在使用9V电池或者6节AA电池时，可以驱动多个串联的高功率XPE/XPG LED或者串联使用的 MCE LED，所有这些升压驱动都能提供简单的设计和大电流的输出。某些控制器可以工作在很低的输入电压，很高的工作频率，由此可以把驱动器设计得很小，升压电路主要应用到手电筒和头灯中。恒流控制可以保证LED输出恒定的流明和色温。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• High efﬁciency 高效率 • Boost output voltage up to 33V 输出电压高达33V • Can access very low input voltage 超低电压工作 • Numerous LED in series 多LED串联工作 • Built-in MOSFET / Transistor 内置 MOSFET / Transistor

• • • • • •

Simple circuit design 电路设计简单 Able to deliver high current output 可大电流输出 Low component count 元件数量少 High frequency for compact size 高频开关尺寸減少 Cost effective 成本经济 Syn Rectiﬁer reduce thermal stress 同步整流减小热损耗

Torch 手电筒 Flash LED 闪光灯 Under cabinet lighting 陈列柜照明灯 Headlamp 头灯 DC/DC constant current controller 恒流控制器 Light bar 灯条

SUPPLIERS (供应商)

Supplier 供应商

ON Semi

Diodes

Fairchild

Micrel

Part No. 产品编号

TPS61165

TPS61058

LM3430

LM3410

LM3492

NCP1421

NCP1450

NCP3065 (boost configuration)

ZXSC310

FAN5336

FAN5333A

L6920

MIC3230

Min. Input Voltage 最少输入电压

2.7V

4.5V

1V (no Load)

0.9V

0.8V

2.5V

1.8V

0.6V

Max. Input Voltage 最大输入电压

18V

5.5V

40V

5.5V

65V

40V

5.5V

45V

Output Voltage 输出电压

38V

2.5V to 5.5V

48V

24V

up to 65V

1.5V to 5.0V

1.9V to 5.0V

3V to 40V

up to 16V (boost 4 LEDs)

up to 33V

up to 30V

up to 60V

Max. Output Current 最大输出电流

350mA (1.2A switch)

up to 500mA

up to 1A or above

350mA to 1000mA

200mA

up to 600mA

up to 1000mA

up to 1500mA

19mA

170mA

750mA

around 500mA

up to 1A

Est. Efficiency 效能

90%

up to 80%

up to 94%

88%

90%

up to 94%

86% to 90%

up to 85%

94%

up to 88%

up to 94%

90% to 95%

Switching Frequency 开关频率

1.2MHz Max

650KHz

600KHz

525KHz / 1.6MHz

200KHz to 1MHz

1.2MHz

180KHz

150KHz

200KHz

1.5MHz

Not specified

400KHz

Feedback Voltage 反馈电压

200mV

500mV

1.25V

0.06V

1.05V to 2.5V

1.2V

O/P dependent

235mV

19mV

1.23V

110mV

1.23V

250mV

Built-in MOSFET 内置 MOSFET

Yes (0.3 Ohm)

Yes (0.26 Ohm / 0.29 Ohm)

Yes (0.3 Ohm)

Yes (Bipolar Power Transistor)

Yes (0.4 Ohm)

Yes (0.6 Ohm)

Yes (PMOS 0.12 Ohm / NMOS 0.12 Ohm)

Component Count 零件总数

Current Mode Operation 恆流

Yes

Package 封装

2mm x 2mm QFN

3mm x 3mm QFN10

SDF12

SOT23-5

eTSSOP-20

Micro8

DSOP5

SOIC8 and DFN-8

SOT23-5

MLP-6

SOT23-5

TTSOP8

TTSOP16

Number of LED LED 数量

12 - 15

up to 28

8 - 10

1-3

10 - 15

1K pcs Reference Price (USD)** 参考价格

1.10

0.80

1.00

1.25

1.60

0.45

0.20

0.45

0.36

0.35

0.28

0.62

1.31

Remark 附录

Built-in softstart and PWM brightness

Shut down mode optimized battery life

Ext. MOSFET allows high current output

Low input voltage

Low noise and adjustable output

Yes Yes (170 mOhm) (190 mOhm)

Two-channel individual Integrated dimmable LED MOSFET for High freq., driver with Syn Rect, low standby boost Anti DCM current converter and ringing fast current regulator

Ext. MOSFET High enable high switching switching current up to current 1.5A

Up to 1.5A Integrated peak Syn Rect and switching reverse current, high battery output protection voltage

Various protection features and PWM dimming

Middle Voltage (12V or above) LED Driver 中端电压输入 LED 驱动 (12V 以上) Middle Voltage LED drivers accept a wider input voltage (12V to 36V) and with high current output. These drivers can drive high power/high brightness LED by serial or matrix. Meanwhile, those controllers are also fit for application for secondary constant current control. Some of the listed drivers have dimming control, high efficiency and up to 75V dc input. Therefore, they can provide very flexible design features for the designer in various applications.

中端电压LED驱动的输入电压通常是从12V至36V，输出电流较大，它们能驱动多个LED的串联或串并联。同时也能应用于AC二次侧的恒流控制。下面列出来的这些方案当中，某些可提供PWM调光控制，某些效率高，某些输入电压高达75V。因此，设计者可以根据需要来灵活设计。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• • • •

• • • • •

• MR16 replacement MR16鹵素灯替換 • Automotive lighting 汽车照明 • Outdoor architectural lighting 户外建筑照明 • Street lamp 2nd constant current control 路灯二次恒流控制 • Light bar 灯条

High output voltage/current 高电压大电流输出 High input voltage 高输入电压 Very low feedback voltage 低反馈电压 Dimming control input 调光控制

Able to drive large amount of LED 可驱动多个LED Compact design 小尺寸设计 Simple design 设计简单 High efﬁciency 高效率 PWM dimming available 可PWM调光控制

SUPPLIERS (供应商)

Supplier 供应商

Richtek

NXP

ON Semi

LTC

Part No. 产品编号

TPS40200

TPS40211

RT8452*

LM3414HV

LM3409HV

LM3424

UBA3070

NCP1215A

NCL30100

NCP3065

ZXLD1350

LT3474

LT3475

LT3466

Min. Input Voltage 最少输入电压

4.5V

12V

6.35V

2.7V

Max. Input Voltage 最大输入电压

52V

36V

65V

75V

190V

16V

18V

40V

30V

36V

24V

Output Voltage 输出电压

Adjustable

14V

Adjustable

26V

25V

39V

Max. Output Current 最大输出电流

up to 1A

350mA or above

0.35A to 1A

1.5A

350mA

2* 1.5A

2* 0.32A

Est. Efficiency 效能

up to 94%

up to 96%

up to 95%

90%

up to 90%

up to 95%

up to 85%

95%

up to 88%

up to 81%

Switching Frequency 开关频率

35KHz 500KHz

Set by ext. resistor

350K

250KHz 1MHz

Base on Roff / Coff

up to 2MHz

30KHz 125KHz

Set by ext. resistor

700K

150KHz

250KHz 1MHz

200KHz 2MHz

Fixed freq. up to 2MHz

Feedback Voltage 反馈电压

700mV

270mV

190mV

–

Nil

2.35V

0.52V

1.2V

–

235mV

0.1V

1.25V

200mV

Built-in MOSFET 内置 MOSFET

Yes

Yes BJT

Yes (1.5 Ohm)

Yes BJT

Component Count 零件总数

–

20+

Package 封装

SOIC8

10 pin SON

SOP16 QFN3*3

ePSOP-8 LLP-8

eMPOP10

TSSOP20

SO8

DIP 8 and TSOP6

TSOP6

SOIC8/DFN-8 or PDIP8

TSOT23-5

TSSOP-16

TSSOP-20

DFN-10 and TSSOP-16

Number of LED LED 数量

12 - 15

1 - 10

up to 18

10 or above

up to 20

8 - 10

1-5

6-8

12 - 15

Topology 线路结构

Buck

Boost, Flyback, SEPIC

Buck / Boost

Buck

Buck / Boost

Buck

Boost

Built-in Dimming Control 调光控制

No, require external circuit

Yes

No, require external circuit

Yes

1K pcs Reference Price (USD)*** 参考价格

0.75

0.99

1.20

1.45

1.75

0.55

0.20

0.50

0.45

0.80

3.54

4.20

2.20

Low part count, high efficiency

Integrated diode and 1A driving current

Dual step down driver

Dual step up converter

Remark 附录

Wide input range, ext. MOSFET allow high current

Buck / Boost / Buck / Boost Buck / Boost SEPIC

Wide input Controller for eMPOP10 Automotive range, ext. buck boost or Very wide improve grade LED 2nd current MOSFET buck-boost input range thermal driver AECcontrol allow high topology performance Q100 Grade 1 current

High NCP1215 Fixed off-time switching can be used buck LED current up in AC driver to 1.5A ﬂyback controller

* Also available in RT8470 for MR16 Applications. MR16应用可同时选用RT8470。 ** Blue highlight means best in class. 标示蓝色的表示在系列中是最好的。 *** 1K pcs order price is for reference only. Please consult Arrow sales representative for quotation. 1K 报价只作参考，如阁下对产品有兴趣，请与客户代表联络再作详细报价。 7

Diodes

Arrow Asia

High Voltage LED Driver (Output Power Level <25W) AC 高压低功率的 LED 驱动 (25W 以下)

LIGHTING Solution Guide

High voltage low power LED driver can connect to universal off-line input (85V to 265V AC input) directly. These drivers can provide up to 1A driving depends on designer application. Most for the drivers have isolated/non-isolated configuration. For indoor lighting application, some of the LED drivers controllers can be compatible with Triac dimmers and well fitted with MCE and MPL LED. With proper design, those controllers can perform very high efficiency in compact size to fit various lighting fixture form factor.

高压稍低功率的LED驱动可以直接连接到全球电网(85V至265V)。如果设计需要，可以提供高达1A的电流。另外，也可连接调光器，并配合MCE及MPL LED应用在室内照明中。只要设计得当，多数此类隔离/非隔离的驱动能够做到高效率并且能够适应各种灯具。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Universal input 全电压输入 • Low feedback voltage 低反馈电压 • Some controllers with built-in MOSFET 一些控制器內内置MOSFET • Wide output voltage and current range 宽输出电压电流范围 • Precious current regulation 精密电流控制

• • • • • • •

• Emergency lighting 应急照明 • Outdoor architectural lighting 户外建筑照明 • Entertainment lighting 娱乐活动照明 • General lighting 通用照明 • LED ballast LED镇流器 • Retroﬁt 传统灯泡替换

High efficiency 高效率 Long life 长寿命 Compact packaging 高集成度 Design flexibility 设计灵活 Compact size 小尺寸 Jitter mode reduce EMI 导频减少EMI问题 Valley switching enhance efficiency 谷底开关技术提高效率

SUPPLIERS (供应商)

Triac Dimming (可配调光器) Supplier 供应商 Part No. 产品编号

NXP

SSL2101/ SN0901026 LM3450 SSL2102 (TPS92210)

Non-Triac Dimming (非调光) NXP

Cypress ON Semi Infineon

LM3445 CY8CLED NCL30000 ICL8001G SSL1523 TEA162X Viper15/25 02AC

HVLED 805

Fairchild

ON Semi

Infineon

L6562A FSEZ1016 FSEZ1216 FSQ0365 NCP1027 NCP101X

ICLS60 21J

ACDC / DCDC

ACDC

Min. Input Voltage 最少输入电压

80Vac

90Vac

85Vac

90Vac

85Vac

207Vac

80Vac

70Vac

85Vac

Max. Input Voltage 最大输入电压

132V / 270V

305Vac

132V / 270V

264Vac

265Vac

250Vac

265Vac

132V / 270V

265Vac

Max. Output Voltage 最大输出电压

DC50V

15 to 100V

DC50V

DC29V

DC50V

Max. Output Power 最大输出功率

10W to 15W

7W to 50W

10W to 100W

8W to 15W

30W

25W

9W to 12W

12W

25W

10W

15 / 90W PFC

10W

25W

15W

10W

Est. Efficiency 效能

80% or above

85% or above

85%

80% or above

up to 88%

80% to 85%

75%

82% to 85%

80% to 85%

70%

75%

82% to 86%

80% to 85%

Switching Frequency 开关频率

User defined

Freq. modulation

User defined

Max 200KHz

User defined

Freq. User modulation defined

User defined

100KHz

42KHz

65KHz / 100KHz / 130KHz

67KHz

Feedback Voltage 反馈电压

Isense 0.25V

0.7V

2.5V

1.27V

1.538V

Isense 0.5V

Isense 1.03V

2.5V

Isense 1.3V

2.5V

0.5 ~ 4.3V

Built-in MOSFET 内置 MOSFET

Yes (6.5 Ohm)

Topology 线路结构

Flyback / Buck

PFC + Flyback

Active PFC + Flyback

Nonisolated Buck

Flyback

Boost / Flyback

Flyback

Package 封装

DIP16

DIP8

TSSOP16

DIP8

SO8

DIP8 / SO14

SO8

DIP7 / SO16

SO16

DIP8

PGDIP-8-6

Number of LED LED 数量

10 - 15

up to 15

No, require external circuit

0.33 to 0.55

0.24 to 0.30

0.33

0.25

0.23

0.41

0.50

0.26

0.50

Built-in Dimming Control 调光控制

2.5V

1.98

Remark 附录

Triac Dim, very good linearity, built-in MOSFET and avoid E cap

0.75

1.85

1.35

Available by request

Resonant Active control High Power efficiency PPFC by achieve Factor high and PFC, valley fill, compatible Correction front end efficiency/ Also and Phase with Triac dimming available dimming Dimming in nonDecoder dimming

0.65

0.70

0.5V

2.5V

Yes Yes Yes Yes (6.5 to 48 (6.5 Ohm) (20 Ohm) (11 Ohm) Ohm)

No, Yes, Triac Yes, Triac Yes, Triac Yes, Triac Yes, Triac Yes, Triac Yes, Triac require dimming dimming dimming dimming dimming dimming dimming external compatible compatible compatible compatible compatible compatible compatible circuit

1K pcs Reference Price (USD)** 参考价格

User Freq. User defined modulation defined

0.49

High efficiency Very high QR Valley Valley QR for and PFC, ﬂyback switching switching QR for PF, Triac Valley Valley compatible PF, Triac increase increase dimming with Triac dimming efficiency efficiency switching switching available dimming

65KHz / Freq. modulation 100KHz

0.7V

2.5V

Yes Yes Yes Yes Yes Yes (10 Ohm) (9.3 Ohm) (4.5 Ohm) (5.8 Ohm) (11 Ohm) (6.45 Ohm)

Optocoupler free design, Jitter mode

Minimum Freq. Freq. Freq. Fixed freq. Jitter Jitter Jitter freq. switching for EMI, for EMI, for EMI, to reduce increase creepage creepage creepage EMI efficiency for HV for HV for HV

High Voltage LED Driver (Output Power Level >25W) AC 高压大功率的 LED 驱动 (25W 以上) High voltage, high power LED driver can connect to universal off-line input (85V to 265V AC input) directly and able to deliver over a hundred watt of electrical power. These drivers can provide very high output current and voltage and also energy efficient. Meanwhile, these controllers and solutions also implement various protection features makes the driver more reliable. The following controllers simplified designs, more cost effective and suit application in streetlight and outdoor illumination application.

高压大功率的LED驱动直接接到电网(86V至 265V)，它能够提供超过100W的功率。这些驱动通常提供大电流高电压输出并且都有较高的效率，同时也能提供各种保护以提高驱动的可靠性。下面的这些方案都是设计比较简单，成本较低，可以应用到路灯和户外照明。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Universal input 全电压输入 • Low feedback voltage 低反馈电压 • PFC and DC/DC combo chip or single stage ﬂyback PFC 集成PFC和DC/DC或者单级反激PFC • Wide output voltage and current range 宽输出电压电流范围 • PWM dimming compatible 兼容PWM调光

• • • • • • • •

• Emergency lighting 应急照明 • Outdoor architectural lighting 户外建筑照明 • Entertainment lighting 娱乐活动照明 • Street lamp 路灯 • Transport lighting 交通灯 • Garden lighting 园艺照明

High efﬁciency 高效率 Long life 长寿命 Compact packaging 高集成度 Design ﬂexibility 设计灵活 High output power delivery 高输出功率 Good thermal management 优异的热管理 High reliability 高可靠性 Ease of EMI / Safety approval 容易获得EMI / 安规的认证

SUPPLIERS (供应商)

Supplier 供应商

NXP

ON Semi

Infineon

Part No. 产品编号

UCC28810

UCC28811

SN0901026 (TPS92210)

SSL1750 / SSL1751

TEA1530

NCP1207

NCP1351

NCP1652

FAN7602

ACDC / DCDC

ACDC

Min. Input Voltage 最少输入电压

85Vac

––

90Vac

70Vac

85Vac

Max. Input Voltage 最大输入电压

276Vac

––

270Vac

276Vac

265Vac

276Vac

265Vac

200VDC

Max. Output Voltage 最大输出电压

PFC output voltage varies depends on loading

up to 150V

DC50V Max.

Max. Output Power 最大输出功率

up to 200W

200W

250W

60W

250W

60W

250W

>500W

80W

Up to 200W

Est. Efficiency 效能

90% or above

90%

88% to 92%

86% to 88%

84% to 88%

85% or above

84% to 88%

Freq. modulation

125KHz

63KHz

Free running

User deﬁned set by Ct

User deﬁned set by Ct (100KHz)

65KHz

500KHz

Free running

User deﬁned set by Rfmin (30KHz to 1MHz)

0.7V

0.5V

2.5V

0.6V

2.5V

500mV

2.5V

Flyback

Flyback (PFC single stage)

Flyback

Buck

Flyback

DIP8

PG-DSO-20

Switching Frequency Self oscillating Self oscillating 开关频率

* **

IRS2540

ICE2QS03

ICE2HS01G

ACDC

85Vac

600VDC

265Vac

IRS2541

ACDC, DCDC ACDC, DCDC

DC80V / Low DC80V / Low DC80V / Low DC80V / Low DC80V / Low DC80V / Low 10% to 90% voltage voltage voltage voltage voltage voltage input voltage constant constant constant constant constant constant voltage source voltage source voltage source voltage source voltage source voltage source

10% to 90% input voltage

DC80V / Low Depends on voltage turn ratio constant voltage source

Feedback Voltage 反馈电压

2.5V

Topology 线路结构

Boost / Buck

Package 封装

SO8

DIP8

SO16

SO8

DIP8

SOIC8

SOIC16

DIP8

Number of LED LED 数量

up to 15

100 to 150

20 to 100

50 to 100

Base on design

Built-in Dimming Control 调光控制

No, require external circuit

Yes, Triac dimming compatible

No, require external circuit

Yes

No, require external circuit

1K pcs Reference Price (USD)** 参考价格**

0.32

0.75

0.78

0.25

0.26

0.20

1.00

0.20

0.60

0.66

0.25

––

Remark 附录

Transition mode PFC

Non-isolated Buck

Fixed freq. ﬂyback

Free running quasi resonant ﬂyback

Variable freq. offtime ﬂyback

Single stage ﬂyback PFC

Flyback with freq. modulation

Non-isolated buck

Quasi resonant

Half-bridge LLC resonant

2.5V

PFC + Flyback Boost / Buck PFC + Flyback (combo chip)

High efficiency PFC ﬂyback combo chip and PFC, / Syn Rect Compatible controller with Triac SSL1761 Dimming

Blue highlight means best in class. 标示蓝色的表示在系列中是最好的。 1K pcs order price is for reference only. Please consult Arrow sales representative for quotation. 1K 报价只作参考，如阁下对产品有兴趣，请与客户代表联络再作详细报价。 *** TPS92210 & SN0901026 is pin to pin compatible. TPS92210 及 SN0901026为对等型号。

Fairchild

DIP8 / SOIC8 DIP8 / SOIC8

Arrow Asia

Lens / Optics for Cree High Power Lighting Class XP LED Cree 照明级 LED XP 系列的光学元件 This page introduces lens and optics solution for Cree lighting class XP series LED from worldwide suppliers. As Cree LED viewing angle is wide (115 degree), therefore for certain applications, such as spot light, torch and MR16 lamp replacement, this viewing angle needs to be focus into a narrower angle and narrow flux beam. However, for area lighting and outdoor lighting application, where wide viewing angle with perfect uniformity, then extended viewing angle optic solutions are also required.

LIGHTING Solution Guide

这一页主要介绍Cree照明级XP系列的LED系列的光学方案。 Cree XP系列的LED视角比较宽(115度)，因此对于某些产品的应用，比如射灯、手电筒和MR16，这种视角需要转换成一个更加窄的光束角。然而对于一些区域照明和室外照明的应用就需要宽视角和均匀性很好，所以扩大光源的发光视角的光学方案也是必需的。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Available in single lens, lens with holder 针对单个LED分带支架和无支架的光学元件 • High efﬁciency 出光效率非常高 • Available in single lens and 3 in 1 lens and multiple LED lens 有配套单个和多个LED组合的光学元件

• Customer can choose the right viewing angle single lens for many of their applications from one supplier, Arrow Asia 针对客户的多种应用，Arrow都可以提供配套的光学方案给客户

• • • • •

General lighting (indoor or outdoor) 通用照明(室内和室外) Architectural lighting 建筑照明 Color changing lighting 七彩灯 Industrial lighting 工业照明 Portable lighting (includes camping, bike lighting, torch light, etc) 便携式照明

SUPPLIERS (供应商)

XP Lens Product Offering Table — Single Lens (XP Lens 光学元件概要) 135

LL01CR-AU85135L (asymmetrical) 85 x 135 degree

130 125 120

F360L-2-XP1-0S 160 (provides a 360 degree pattern)

LL01CR-FT60135L (symmetrical) 60 x 135 degree

Strada-B-XP ±58 degree

115

Viewing Angle (degree) 视角

$0.49

$0.73

60 55

FC-E1-XPE1-HRF 10 x 50 degree / lens+holder

FCP-E1-XPE1-0R 10 x 50 degree

LL01CR-DF60L 60 degree/11.8 x 6.6

50 45 40 35 30

LL01CR-DF40L 40 degree/11.8 x 6.6 ** available in BR series

20 15

FC-W1-XPE1-HRF 27 degree / lens+holder

FCP-W1-XPE1-0R 27 degree

LL01CR-DG30L 30 degree/28.8 x 16.5 LL01CR-DF25L 25 degree/11.8 x 6.6

FCP-M1-XPE1-0R 21 degree FCP-N1-XPE1-0R 10 degree

$0.48

$0.57

FC-M1-XPE1-HRF 21 degree / lens+holder

$0.65

PL1265 Series 10, 25, 40 degree

FA10708_CXP-W ±17 degree/21.6 FA10645_Tina-XP-M ±15 degree / 16.1 x 10.1

FA10665_CXP-M ±15 degree/21.6

FLT-x1-XP1-0R 20, 35, 22x35 degree

FA10667_CXP-SS / FA10666_CXP-D ±5 degree / 12 Degree/21.6

FA10887_Tina-XP-RS ±5.5 degree / 16.1 x 10.1

FC-N1-XPE1-HRF 10 degree/lens+holder

5 1K Ref.

FA10669_CXP-O ±7 x ±23 degree/21.6

FA10645_Tina-XP-W ±20 degree / 16.1 x 10.1

LL01CR-DG40L 40 degree/28.8 x 16.5

FA10668_CXP-RS ±3 degree/21.6

$1.11

$0.87 1K Reference Price 参考价格

XP LED 3-IN-1 / 4-IN-1 / 5-IN-1 Lens Product Offering Table XP LED 三合一、四合一、五合一光学元件概要

XP LED 6-IN-1 / 9-IN-1 Lens Product Offering Table XP LED 六合一、九合一光学元件概要

70 LL05CR-FR60L 60 degree/35.8 x 6.5

50 LL05CR-FR40L 40 degree/35.8 x 6.5

PL1151 Series 10, 25, 40 degree

40 35 30

CUTE-3-ISF-M for XPE ±11 degree/35mm

25 20 15

LL04CR-GP25L 25 degree/22.2 x 6.7

PL605A06 10 degree/ 35mm

LL05CR-FR25L 25 degree/35.8 x 6.5

Viewing Angle (degree) 视角

$0.60

$0.90

LL06CR-CK60L 60 degree/73.2 x 13.5 ANNA Series 16, 40 degree

40 LL09CR-FR40L 40 degree/45 x 7.0

35 30 25 20

LL06CR-CK25L 25 degree/73.2 x 13.5

LL09CR-FR25L 25 degree/45 x 7.0

15 10

CUTE-3-ISF-M for XPE ±6 degree/35mm

LL09CR-FR60L 60 degree/45 x 7.0

5 $1.73

1K Reference Price 参考价格 ** 1K pcs reference price is for reference only, please consult Arrow sales representative for quotation. 1K 报价只作参考，如阁下对产品有兴趣，请与客户代表联络再作详细报价。

$1.35

$2.84 1K Reference Price 参考价格

Lens / Optics for Cree High Power Multiple Chip MCE, MX6, XML, MTG and MPL LED Cree 照明级多芯片 LED MCE、MX6、XML、MTG、MPL 系列的光学元件 This page introduces the optical solution for Cree multiple chip MCE, MX6, XML, MTG and MPL lighting class LED. These lens and optics products are mainly target in general lighting application such as spot light, indoor lighting, high end portable lighting etc.

这一页主要介绍照明级的多芯片LED MCE、MX6、XML、 MTG和MPL的光学方案。这些透镜和光学产品主要针对通用照明领域的应用，比如射灯、室内照明以及高端的便携式照明产品等。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• • • • •

General lighting (indoor or outdoor) 通用照明 (室内和室外) Architectural lighting 建筑照明 Color changing lighting 七彩灯 Industrial lighting 工业照明 Portable lighting (includes camping, bike lighting, torch light, etc) 便携式照明

SUPPLIERS (供应商)

MCE LED Lens Product Offering Table — Single Lens, Reflector and Multiple LED Lens

(MCE LED 光学元件概要 — 反光杯、单个和多个 LED)

Viewing Angle (degree) 视角

55 50 45

LL01CR-BR40L 40 degree/19.6 x 12.5

LL01CR-DG40L 40 degree/28.8 x 16.5

FA10615_LM1-REC ±19 x ±12 degree / Dia21.6

40 FA10614_LM1-M ±12 degree/Dia21.6

30 25 20

LL01CR-DG30L 30 degree/28.8 x 16.5

FA10613_LM1-RS ±10.5 degree/Dia21.6

15 10

CA10944_RGBX-MC-M ±13 degree/Dia30.4

CA10953 Iris-M lens ±15 degree/Dia38

FRC-N1-MCE-0R 30 degree

LL06CR-CK25L 25 degree/73.2 x 13.5

CA10961_RGBX-MC-SS ±10 degree/Dia30.4

CA10861 Iris lens ±5.5degree/Dia 38

FRC-N1-MCE-0R 10 degree

5 1K Ref.

$0.48

$0.57

$1.11 $1.80 1K Reference Price 参考价格

$2.17

MX6 LED Lens Product Offering Table — Single Lens, Reflector and Multiple LED Lens

$2.84

(MX6 LED 光学元件概要 — 单个和多个 LED)

Viewing Angle (degree) 视角

55 50

LL03CR-EK60L 60 degree/35 x 9

LL01CR-DG60L 60 degree/28.8 x 16.5

LL01CR-BR60L 60 degree / 19.6 x 12.5

LL01CR-AO60L 60 degree / 19.4 x 21.5

40 35 30

LL03CR-EK40L 40 degree/35 x 9

LL01CR-BR40L 40 degree/19.6 x 12.5

LL03CR-CE38L 38 degree/37 x 9.9

25 20

LL06CR-CK25L 25 degree/73.2 x 13.5

15 10 5 1K Ref.

$0.38

$0.48

$0.57 $0.68 1K Reference Price 参考价格

XML LED Lens Product Offering Table XML LED 光学元件概要

FRC-W1-MPL-0R 50 degree reﬂector

40 35 30

C11862 Minnie-W-MTG 36 degree reﬂector

CA11182_Brooke-M ±18 degree reﬂector

25 20 15

Viewing Angle (degree) 视角

MPL / MTG LED Lens Product Offering Table — Reflector MPL / MTG LED 光学元件概要 — 反光杯

Eva-XM 20, 36, 58 degree

45 40 35 30 25 Cute-3-XM 20, 25 degree

20 15 10

1K Ref.

1K Ref. 1K Reference Price 参考价格

$2.84

** 1K pcs reference price is for reference only, please consult Arrow sales representative for quotation. 1K 报价只作参考，如阁下对产品有兴趣，请与客户代表联络再作详细报价。

$0.80

$1.00 1K Reference Price 参考价格

** MPL/MTG LED lens and price will be available soon. MPL/MTG LED透镜及其价格即将公布。

Arrow Asia

LedLink — Lens / Optics 雷笛克光学股份有限公司 — 透镜 / 光学

LIGHTING Solution Guide

LedLink is one of the suppliers of Arrow lighting optics solution provider. It is an expertise optical solution company which has been recognised by Cree. With integration of in house optical design, mould tooling, and mass production, the performance of LedLink lens is ultilised to meet rapid shift in lighting industry. Lamp manufacturers may adapt our standard products or our customised lenses to design innovative LED fixtures. In order to facilitate the evaluation process and reduce the developing time and cost of LED street light application, LedLink has developed nine types of street light lenses which are compatible with light various LED manufacturers. These lenses are designed with different assumed conditions of the road and pole arrangements to optimise both the uniformity and the output lux value. Technical data, such as IES files, datasheets or the assumed installed conditions details is available by request.

为了降低客户开发LED路灯的时间及成本，雷笛克开发了多种配合不同LED之路灯透镜，在设计这些路灯透镜时，IES 档、规格书及以下所列举的道路环境资讯可以提供给我们，我们针对各种可能的道路条件及灯杆配置做优化设计，使透镜效率及均匀度能达到不同的规范。

APPLICATIONS AREA - DESIGN CRITERIA (路灯应用 - 设计要求) • • • • • •

Installed height of the pole 路灯杆高 Distance between the poles 路灯杆距 Arm length 路灯杆臂长度 Tilt angle 杆臂倾斜角度 Road width 路宽 Arrangement of the poles 路灯设置方式

To achieve energy saving, reduce the gap and the differences between traditional light and LED light source in street lamps, using the rectangular beam projected by secondary lenses, the output lum which generated by LEDs can be ultilised and the efficiency can be optimised.

Arm Length

相较於传统路灯，LED路灯除了达到节能效果外，尤其使用我们的二次光学透镜，其发射出的矩形光更能使 LED路灯达到最高发光效率及最佳照明效果。

ta n

Height

Width

LedLink — Lens / Optics 雷笛克光学股份有限公司 — 透镜 / 光学 PRODUCTS BY APPLICATION CATEGORIES (产品应用) • • • • • •

Retroﬁt lighting application 传统灯泡替换 Torch 手电筒 Large area optic for street lamp 路灯 Stage lighting 舞台照明 Light bar 灯条 Tunnel lighting 隧道照明 Narrow Beam 窄光束

Also available with : 25°, 40°, 60°, 80°, 25°x40°

Also available with : 30°, 50°, 10°x45°, 15°x50°, 15°x80°, 40°x90°

LL01ZZ-EX10L-M2 Degree: 10° D x H: 22.4 x 9.8mm

XPC

Also available with : 25°, 40°, 60°, 30°x65°

LL01SH-AU75135L Symmetrical beam 对称光束 Degree: 75°x135° D x W x H: 24 x 12.6 x 9.3mm LL01CR-AU50120L Symmetrical beam 对称光束 Degree: 50°x120° D x W x H: 21 x 11.8 x 9.4mm

Also available with : 25°, 40°

LL01CR-OG85150L Asymmetrical beam 不对称光束 Degree: 85°x150° D x W x H: 18 x 8.9 x 6.1mm

LL03CR-RX60L Degree: 60° D x H: 35 x 8mm Also available with : 4-in-1, 6-in-1, 7-in-1, 9-in-1, 12-in-1 40°

Also available with : 25°, 60°, 25°x45°

LL01CR-HQ40L-M2 Degree: 40° D x H: 16 x 10.3mm Also available with : 30°, 60°

Also available with : 40°, 60°, 80°, 100°

Others 其他 (对称/不对称光束)

LL06ED-AD60L Degree: 60° D x H: 73.3 x 13.9mm

LL01CR-NE40L-M2 Degree: 40° D x H: 23.5 x 15.8mm

LL01CR-DF25L-M2 Degree: 25° D x H: 13.5 x 7.1mm

XPG

Wide Beam 阔光束

LL01CR-BR40L Degree: 40° D x H: 19.6 x 12.5mm

LL01CR-AO15L-M2 Degree: 15° D x H: 23.5 x 16mm

XRE

XPE

Medium Beam 中光束

LL01CR-KM6090L Symmetrical beam 对称光束 Degree: 60°x90° D x W x H: 17.6 x 11.6 x 8.6mm LL24CR-AU75135L Asymmetrical beam 不对称光束 Degree: 75°x135° D x W x H: 120 x 100 x 10.22mm

LL03CR-AZ45L Degree: 45° D x H: 50.5 x 13mm Developing : 25°, 60°

LDKPCR-24L3WS4-01 MCPCB is available

(**PS1)

MCE

LL01ED-AY10L Degree: 10° D x H: 43.8 x 24.5mm Also available with : 38°

LL01CR-FL25L-M2 Degree: 25° D x H: 24.4 x 12.2mm Also available with : 25°, 40°, 60°, 30°x65°

Also available with : 40°, 60° LL01NI-GR40L-M2 Degree: 40° D x H: 23.6 x 15mm

LL01ZZ-FL25L Degree: 25° D x H: 22 x 10.6mm

MX6

LL01CR-DG30L-M2 Degree: 30° D x H: 32.8 x 18mm

MCE RGBW colour mixing

Also available with : 10°, 30°, 60° LL01ED-CY30L Degree: 30° D x H: 26.8 x 20.6mm

LL01ED-AK25L Degree: 25° D x H: 34.6 x 18.7mm Also available with : 40°

Also available with : 45° LL01ED-AY38L Degree: 38° D x H: 43.8 x 24.5mm

MPL

LL03ED-AF45L Degree: 45° D x H: 50.5 x 19.6mm

LL03CR-HK60L Degree: 60° D x H: 35.8 x 8.2mm

Also available with : 60°, 80°

XML

LL01ED-AJ60L Degree: 60° D x H: 28.8 x 19.8mm

LL01CR-SQ60L-M2 Degree: 60° D x H: 21 x 13.9mm

Coming Soon Asymmetrical beam 不对称光束 D x W x H: 32 x 17.6 x 10mm

Developing : 25°, 40°, 80°, 30°x65° LL01ED-IH60L Degree: 60° D x H: 87 x 44.25mm

Also available with : 10°

LL01CR-PV80L Degree: 80° D x H: 45 x 23.6mm Also available with : 60°

PS1**XPC/XPE/XPG beam pattern is compatible but the beam angle is different. The beam angle is tested based on XPE. 以上光束角度以XPE测试结果为准。 ** IES file, datasheets are available by request. 客户可索取IES档案及规格书。

1. Customisation Process and Time

1. 个别开发项目流程及需时

a. b. c. d. e. f.

To deﬁne the light source (LED type) To define the beam angle (full angle view) To define the mechanical design The optical simulation time is two weeks after above details confirmed T1 sample will be available within 30 days after our client confirms our provided simulation report Total developing period is around 30 to 45 days, depending on the situation

2. Lead Time

Normally our lead time for mass production product is three weeks

* For any inquiry, please contact your local Arrow Distributor, or email to lighting@arrowasia.com. 如欲查询产品资料，请联系艾睿电子，或联络lighting@arrowasia.com。

定义LED厂牌以及型号定义角度(90%光强度全角或是50%光强度半角) 定义机构设计在客户模具定金50%确认後两周内提供光学模拟报告第一次试模样品在光学模拟报告确认内30天可提供总开发时间为30到45天，但可依照客户的需求来作调整

2. 需時交貨期一般需時三週

Arrow Asia

LEDIL — Asymmetric Lenses LEDIL — 非对称配光的透镜组合

LIGHTING Solution Guide

Ledil is strongly growing its portfolio for wide angle asymmetrical optics to perform in many challenging light applications. Asymmetrical designs are optimal in many applications such as street lighting, where tilting the lamp head traditionally wastes more light and generates glare. Asymmetrical designs also over comes many mechanical limitations, such as developing an efficient streetlight without a boom over the street.

针对不同的照明应用，LEDIL快速增加了大量的大角度非对称配光的透镜组合。LEDIL优化设计的针对路灯设计的非对称光学有以下特点： 1. 避免了在传统照明中的灯具仰角造成的光浪费和眩光产生 2. 也可以解决一些机械设计方面的限制，比如可以直接悬挂在没有灯臂的灯杆上

Ledil Oy Tehdaskatu 13, Fl-24100 Salo Tel. +358 2 733 8001 www.ledil.com

Emily-was • Same mechanical dimensions with symmetrical Emily lenses 与对称配光的Emily透镜同样的尺寸 • Asymmetrical light distribution for better efﬁciency 非对称配光，更高的效率 • Spot and oval beam patterns 投射和椭圆光束角度

Strada-T • Compatible with other Strada product 与其他的Strada产品兼容 • Designed for street lighting 路灯专用透镜 • Asymmetrical light distribution for better efﬁciency 非对称配光，更高的效率 • Two lens types designed to be combined for better results 两种角度透镜组合取得更好的效果

Strada-SQ-T • 25mm square footprint 25mm正方形 • Designed for street lighting 路灯专用透镜 • Asymmetrical light distribution for better efﬁciency 非对称配光，更高的效率 • Two lens types designed to be combined for better results 两种角度透镜组合取得更好的效果 • Markings for machine assembly 方便自动化生产 • Space for sealing materials 预留灌封材料位置

Strada-T-6x1-DNW • 120mm x 25.2mm footprint 120mm x 25.2mm • Designed for street lighting 路灯专用透镜 • Asymmetrical light distribution for better efﬁciency 非对称配光，更高的效率 • 6 lens module 6个透镜的模组 • Markings for machine assembly 方便自动化生产 • Space for sealing materials 预留灌封材料位置 • Simple outer shape for easy cleaning 外形简单，容易清洁

Strada-F • Compatible with other Strada product 可兼容其他的Strada产品 • Forward throwing light pattern Forward和Throwing配光 • Asymmetrical light distribution for better efﬁciency 非对称配光，更高的效率 • Two lens types for different applications 两种角度透镜组合可以有多种不同的应用 14

LEDIL — Asymmetric Lenses LEDIL — 非对称配光的透镜组合

How to choose Ledil lenses (如何选择Ledil透镜) Lens type (透镜类型) Spot (-RS/-SS/-D)

Medium (-M/-M2)

Light distribution (光输出分佈) • Symmetrical 对称配光 • FWHM angles varies from 2° to 12° 2°到12°多种角度 • Symmetrical 对称配光 • FWHM angles varies from 12° to 20° 12°到20°多种角度

Wide (-W/-WW/-WWW)

• Symmetrical 对称配光 • FWHM angles varies from 20° to 40° 20°到40°多种角度

Oval (-O/-O-90/-REC)

• All oval and rectangular patterns 椭圆和方形配光 • FWHM angles usually close to 10° and 20° 通常角度在10°到20°

Street lighting

• Light distribution patterns designed for street lighting 路灯专用配光

Ledil Oy Tehdaskatu 13, Fl-24100 Salo Tel. +358 2 733 8001 www.ledil.com

Notes (其他资料)

• Most of our lens series have products from these categories Ledil有针对大部分产品类别的透镜组合

• Lenses available for most high power led models LEDIL有针对大部分的高功率LED的光学产品

• All Strada lenses (except Strada-S) 所有的Strada系列透镜 (不包括Strada-S) • Lenses for XP, XM and XR led series 针对XP、XM和XR Led

Back lighting

• Extremely wide batwing design 宽角蝙蝠翼配光

• Julia lenses for XP series 为XP Led设计的Julia透镜

Special

• Light distribution patterns for different applications 不同应用的特殊配光

• Strada-S for XP series 为XP Led设计的Strada-S透镜 • Flare for XP series 为XP Led设计的Flare透镜

Majority of our products are designed for XP LED series but we also have good product range for most of the Cree leds. We have products for older LEDs like XR-E, MC-E and MX series and also good range of products for the newest Cree leds like XM-L, MT-G and CXA20. Please visit our webpage for more information. 以上大多数产品是针对 Cree XP 系列Led设计，同时我们也有针对Cree其他类别LED的高品质产品，比如我们有针对Cree的XRE、 MCE、MX系列，XM-L、MT-G和CXA20等等，如果你需要了解更多的LEDIL标准产品，请浏览我们的网页。 www.ledil.com

Arrow Asia

Microcontroller 微处理器

LIGHTING Solution Guide

Adding intelligence for dimming control, eliminating low frequency blinking, maintain constant current for LED. Programmable pattern display for flashing control such as SOS signal or any pattern pre-stored in Flash/ROM memory. Some MCU controllers also consist of multiple LED driver channels for multiple LED string control.

微处理器可增加调光控制的智能功能，消除低频闪烁，同時保持对LED的恒流控制。另外，MCU为闪烁控制提供可编程图案显示，比如SOS信号，或者任何預定存在於Flash/ROM中的图案。一些MCU控制器也带有多LED驱动通道以满足多芯片LED或LED串控制。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Programmable Timer/PWM out 可编程Timer/PWM输出 • Built-in temperature sensor 含有温度感应器 • ADC or analog comparator ADC或者模拟比较器 • Flash memory Flash记忆

• Ease of implementation 容易设计使用 • Makes RGB easy 颜色变化容易 • Improve color quality 改善顏色质量

• Home general lighting 家庭通用照明 • Flashlight torch 手电筒 • Automotive signal lights and interior lighting 汽车信号灯和室內照明 • SOS signal blinking / pattern display SOS信号闪烁/图案显示 • Car emergency warning light 小汽车紧急警告灯 • Smart ﬂashlight 智能手电筒

SUPPLIERS (供应商)

Supplier 供应商

Freescale

NXP

Cypress

Atmel

Renesas

Part No. 产品编号

MC9S08QD2 MSC

MC9S08QD2 CPC

MC9RS08 KA2

MC9RS08 KA1

P89LPC9102

P89LPC901

MSP430F 2012

MSP430F 2001

CY8CLED04C

ATiny13V10SU

ATtiny26L8SU

M37548G1

M34283G2GP

MCU Type MCU 类型

8bit

16bit

8bit

4bit

Min. Input Voltage 最少输入电压

2.7V

1.8V

2.4V

1.8V

2.7V

1.8V

Max. Input Voltage 最大输入电压

5.5V

3.6V with 5V tolerant I/O pins

3.6V

32V

5.5V

3.6V

Standby Current 辅助电流

0.8uA@5V

1uA@5V

1uA@3V

0.5uA@3V

25uA

0.1uA@1.8V

1uA@3V

0.1uA

1uA

External Interrupt 外部中断

Yes

No (but have wake up pins)

Timer Interrupt 时钟中断

Yes

Memory 寄存器

2K Flash

1K Flash

2K Flash

1K Flash

16K Flash

1K Flash

2K Flash

2K QzROM

RAM 随机存取存储器

128B

64B

128B

1K SRAM

64B

128B

192B

32B

# of Timer 定时器大小

2ch 16bit

1ch 8bit

2ch 16bit

1ch 16bit

8 to 32bit

1ch 8bit

2ch 8bit

1 x 16bit, 2 x 8bit

2ch 8bit

A/D 模数转换

4ch 10bit

Comparator

4ch 8bit

Comparator

1ch 10bit

Comparator

12bit

4ch 10bit

11ch 10bit

6ch 10bit

Other Features 其它特性

Temp. sensor

N/A

DMX512

N/A

GP I/O GP 输入/输出

4/6

Package 封装

8 PDIP 8 NB-SOIC

6 DFN (3x3mm) 8 NB-SOIC 8 PDIP

HVSON10 (3x3mm)

8 SOIC 8 DIP

14PDIP 14TSSOP 16QFN

QFN56

8 DIP 8 SOIC

20 DIP 20 SOIC

20pin SSOP

Operating Temp. 操作温度

-40°C to 125°C

-40°C to 85°C

-40°C to 105°C

-40°C to 85°C

-20°C to 85°C

C-Compile 编译

Yes

1K pcs Reference Price (USD)** 参考价格

0.64

0.61

0.42

0.40

0.60

0.55

0.90

0.50

Available upon request

0.66

0.96

0.86

0.29

Heat Sink 散热器 This is specially designed for IRC Anotherm heat sink. IRC Anotherm is the best commercial material known to Arrow, to pass through heat from LED to ambient temperature. Since these heat sink are mostly customized, each request will be taken as a special handling deal. Its best thermal conductivity comes from the fact that LED (XPE thermal resistance, junction to solder point, typical 9°C/W) sit on top of IRC Anotherm circuitry (K=27w/m-‘K) which passes the LED heat directly onto the Aluminum (K=201w/m-‘K) immediately below it. There is no need of any heat gel which K value is lower than the Anotherm, in between the MCPCB/Anotherm and the heat sink below (aluminium with fin).

这是IRC Anotherm所设计的散热器。IRC Anotherm将热量从LED传导到周围环境，是Arrow所了解的最好的商业材料。因为这种散热器大多数情况下是定制的，所以每一种需求都将视为特殊項目去处理。他优良的导热系数来自于LED(XPE的热阻，结点到焊点，典型值9°C/W)直接放在IRC Anotherm(K=27w/m-‘K)的线路上面，因此LED上的热量直接通过导线传导到下面的铝材(K=201w/m-‘K)上。在 MCPCB/Anotherm和散热器(铝基板)之间不需要任何K值小于Anotherm的散热胶。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Fastest heat dissipation 散热最快 • All shapes and sizes 各种形状和尺寸

• Sustain LED junction temperature 维持LED结温不变 • PCB to heatsink as one aluminum body PCB到散热器成为一个铝合体

• Street lamp 道路照明 • Automotive 汽车应用 • General lighting 通用照明

SUPPLIER (供应商)

TYPES (类型)

IRC Anotherm HMSL Heat Sink IRC Anotherm HMSL 散热器

16cm x 4cm x 1.3cm with fin behind the PCB (USD 3.8 for 5K set) 16cm x 4cm x 1.3cm 散热片排列在PCB后面 (5K套时，单价3.8美元) Fin view 散热片示意图

PCB view PCB 示意图

IRC Anotherm Torch Heat Sink IRC Anotherm 筒状散热器

2.8cm diameter x 3cm cylinder length (USD 1.3 for 5K set) 2.8cm直径 x 3cm柱高 (5K套时，单价1.3美元)

Arrow Asia

PCB / MCPCB 线路板 / 铝基板

LIGHTING Solution Guide

Due to the high current needed to drive the high-brightness LEDs, thermal management becomes increasingly important especially when the number of LED count becomes increasing. Arrow Lighting source and provide differentiated PCBs so that our customers have the world best commercially available fast heat-drain PCBs. Arrow will also provide custom IRC Anotherm board, single LED per MCPCB as well as 3 in 1 MCPCB for special customers’ needs.

由于驱动高亮度LED需要电流高，所以散热变的越来越重要，特别是当LED数量增加的时候。为了使我们的客户拥有全世界最好最快的商用散热PCB，艾睿照明小组开发并且提供多样化的PCB，Arrow也会提供给特殊客户IRC Anotherm散热板，单颗LED的铝基板和三合一的铝基板。

FEATURES (特性)

BENEFITS (优点)

APPLICATIONS (应用)

• Available in FR4 with metal base at 0.8w/m-‘K 金属衬底的FR4，导热系数0.8w/m-‘K • Available in MCPCB, at about 1 to 4w/m-‘K 铝基板，导热系数在4w/m-‘K • Available in IRC Anotherm at 27w/m-‘K IRC Anotherm导热系数在27w/m-‘K

• Cheap and must be used with Vias, for 1 to 2 LEDs @350mA 便宜，使用时需要Vias，在350mA焊1到2颗LED • Industrial standard, affordable price 符合工业标准，价格合理 • Better thermal MCPCB, but higher price 散热比铝基板好，但是价格也贵很多 • Best available thermal MCPCB, most costly 最有效的散热铝基板，价格最贵

• Torch light or any single to 3 LED source of lighting 手电筒，任何带1到3颗LED光源 • Street lighting, park lighting 路灯、庭院灯 • General lighting 通用照明

SUPPLIER (供应商)

TYPES (类型)

Thermal Conductivity 导热系数 (w/m-‘K)

A 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Asian Supplier 亚洲供应商 Standard Star-board, Round-board or Square-board with FR4+metal base, MCPCB & IRC Anotherm material 标准星形板，圆形板和方形板，所用材料是FR4+金属衬底，铝基板或者IRC Anotherm

IRC Anotherm Star Alu PCB 27w/m-‘K IRC Anotherm星形铝基板 27w/m-‘K

USD 1.20

Arrow lighting star MCPCB for Cree XRE/C, MCE, XPE/C & CLN6, ARR2-SM20, ARR2-MCE-P, ARR2-XPE, ARR2-MCE-S, ARR2-CLN6, ARR2-MX6 Arrow照明星形铝基板，适用于Cree XRE/C、MCE、XPE/C & CLN6、 ARR2-SM20、ARR2-MCE-P、ARR2-XPE、 ARR2-MCE-S、ARR2-CLN6、ARR2-MX6

Arrow lighting round MCPCB 3 in 1 XRE/XRC LED ARR2-31MC45 (50mm)

Arrow照明圆形三合一铝基板 XRE/XRC LED ARR2-31MC45 (45mm)

Arrow照明圆形三合一铝基板 XRE/XRC LED ARR2-31MC45 (50mm)

USD 0.76

USD 0.26 $0.20

Arrow lighting round MCPCB 3 in 1 XRE/XRC LED ARR2-31MC45 (45mm)

$0.40

$0.60

USD 1.09

$0.80

$1.00

$1.20

$1.30

$1.40

* Each panel contain 20pcs of Star MCPCB. 每块有20片星形铝基板。 ** MPL LED MCPCB will be available soon. MPL LED MCPCB快将推出。

IRC Anotherm 6 Cree Rectangular 矩形IRC Anotherm板，含6个Cree LED焊盘

IRC Anotherm 8 Cree Rectangular 矩形IRC Anotherm板，含8个Cree LED焊盘

35.7cm x 3.2cm x 2mm board (USD 4 for 5K set)

56.5cm x 3.2cm x 2mm board (USD 6.3 for 5K set)

35.7cm x 3.2cm x 2mm板 (5K套时，单价4美元)

56.5cm x 3.2cm x 2mm板 (5K套时，单价6.3美元)

IRC Anotherm 12 Cree Rectangular 矩形IRC Anotherm板，含12个Cree LED焊盘

IRC Anotherm 12x3 Cree Rectangular 矩形IRC Anotherm板，12x3 Cree LED焊盘

30.3cm x 4cm x 1.5mm board (USD 4.3 for 5K set)

29.5cm x 9.4cm x 1.5mm board (USD 9.6 for 5K set)

30.3cm x 4cm x 1.5mm板 (5K套时，单价4.3美元)

29.5cm x 9.4cm x 1.5mm板 (5K套时，单价9.6美元)

IRC Anotherm 1 Cree Round 圆形IRC Anotherm板，含1个Cree LED焊盘

IRC Anotherm 5 Cree Round 圆形IRC Anotherm板，含5个Cree LED焊盘

Round 2.4cm diameter board (USD 1.6 for 5K set)

Round 7.6cm diameter board (USD 14.8 for 5K set)

Round 2.4cm diameter板 (5K套时，单价1.6美元)

Round 7.6cm diameter板 (5K套时，单价14.8美元)

LED Application: Estimating Junction Temperature from MCPCB LED 应用：由 MCPCB 估算结温的方法 In LED lighting design, thermal management becomes one of the most challenging area. As in order to extend LED life for maximizing the lighting fixture reliability. It is always necessary to estimate the LED chip junction temperature in design stage. In the following, the method of LED thermal management as well as junction temperature estimation will be introduced.

在LED照明设备的设计中，散热处理成为最具挑战的领域之一。为了延长LED的寿命而增加照明设备的可靠性。所以在设计照明平台上必须去估算LED芯片的结温。下面将介绍LED的散热处理，即结温估算方法。

The Proper Way to Measure LED Solder Point Temperature: 一种可行的方法是去测量LED焊点的温度： Place the temperature probe or thermal couple just right next to the LED package. 把温度探针或者热偶放到LED封装边的焊点上。

Extended solder pad for temperature measurement into the MCPCB. 增大焊盘面积去测量MCPCB的温度。

LED Chip

Solder Point

Rth j-sp Tj

Tsp

Heatsink

Ambient

Rth h-a

Rth sp-h

To estimate the junction temperature, designer should consider the total thermal resistance from ambient to junction, which include the thermal resistance from junction to solder point, solder point to heatsink and heatsink to ambient.

为了测量结温，设计者要考虑到所有的从环境到结点的热阻，包括结点到焊点，焊点到散热器和散热器到环境。

$1.40

Application Example: Estimating Junction Temperature in XRE LED

应用实例：测试XRE LED的结温

Calculating the junction temperature from measuring the solder point temperature: Assuming an Xlamp LED driving at 350mA at 3.3V, the measured solder point temperature is 51.2°C, the junction temperature can be estimated as:

从测量焊点的温度计算结温：假设一个大功率LED驱动在350mA、3.3V，焊点测量出来的温度是51.2°C，则结温计算如下：

Total LED power (LED总功率) = 3.3V x 350mA = 1.155W

Junction Temperature Tj = Temperature of solder point 结温 Tj = 焊点温度 = 51.2°C + 8°C/W x 1.155W = 60°C

+ +

Rth(j-sp) x Power(Rth of XRE is 8°C/W) 热阻系数 x 功率(XRE的热阻系数是8°C/W)

Arrow Asia

Arrow Lighting Application Solution — AC/DC Street Lamp Application 艾睿照明应用方案 — AC/DC LED 路灯应用

LIGHTING Solution Guide

AC/DC STREET LIGHTING APPLICATION DESCRIPTION (AC/DC 路灯照明应用描述)

ABSTRACT

摘要

In this application, an AC/DC street lamp application will be presented. Arrow Lighting provides solution on street lamp lighting design in high power LED, high efficiency LED driver as well as lens/optics solution. Apart from street lamp application, this design concept can also be applied in outdoor lighting such as floodlight and spotlight.

在这AC/DC路灯应用方案中。艾睿照明提供HPLED路灯应用。大功率LED驱动和透镜/光学解决方案。除了路灯应用，这种设计概念也可运用于室外照明，如泛光灯及射灯。

STREET LAMP DESIGN CRITERIA

路灯设计准则

Most of the country has implemented lighting design standard for street lamp. In China, the street lamp should be designed base on the national standard CJJ45-2006, which is a Chinese standard of lighting design in urban road. It governs the Luminance, Illuminance, Uniformity, threshold increment as well as surround ratio on various kind of road lane. Meanwhile, this standard also govern the street lamp luminaires efficiency, lumen maintenance as well as life time in real application.

在大多数国家，路灯照明已被标准化。在中国內地，路灯的法規标准为CJJ45-2006。CJJ45-2006规范了在不同种类的道路中的照度均匀度及边緣比例等要求。同時CJJ45亦規范了路灯灯具的光效，光衰及寿命等。

DEFINITION

定义

Average Illuminance Eav: Horizontal illuminance averaged over a road area. Overall Uniformity (of road surface luminance, illuminance): Ratio of the lowest to the average value of illuminance. Longitudinal Uniformity: Ratio of the lowest to the highest road surface luminance of the driving lanes. Threshold Increment TI: Measure of the loss of visibility caused by the disability glare of the luminaires of a road lighting installation. Surround Ratio (SR): Average illuminance of strips just outside the edges of the carriageway in proportion to the average illuminance on strips just inside the edges.

平均照度：在整条道路上的照度的平均值。总体均匀度U0：最低照度和平均照度比值。纵向均匀度UL：行车道路面最低亮度和最高亮度的比值。阈值增量TI：道路照明系统中，由于光源的失能眩光引起的能见度损失的测量。 SR边缘比例：行车道边缘平均照度于行车道平均照度比值。

CREE LED IN STREET LAMP

可用於路灯的科锐发光二极管

Cree Xlamp XPG, XPE and XML delivers high lumen output, high efficacy, good color quality as well as high reliability, which fit for various outdoor lighting application such as street lamp, floodlight, pathway lighting and landscape lighting. These LED series form a perfect choice for outdoor lighting application together with Arrow lighting LED driver and optical solution.

科锐公司提供高亮度，高光效，高质素及高可靠性的 XPG、 XPE 及 XML LED，可多方面应用於户外照明，如路灯，泛光灯，庭园照明。如与艾睿LED驱动及光学方案一并应用更是一个户外照明方案的完美配合。

XPG LED

XPE LED Color

Min.

Cool White

Outdoor White

Neutral White

Warm White

Base Order Codes Min. Luminous Flux(lm)

CCT Range

5,000K

4,000K

3,700K

2,600K

Max.

10,000K

5,300K

5,000K

3,700K

Group

Flux(lm)

100

107

Base Order Codes Min. Luminous Flux(lm)

Order Code

Group

Flux(lm)

XPEWHT-L1-0000-00C01

114

XPGWHT-L1-0000-00E51

XPEWHT-L1-0000-00D01

122

XPGWHT-L1-0000-00F51

114

XPEWHT-L1-0000-00E01

130

XPGWHT-L1-0000-00G51

122

XPEWHT-L1-0000-00F01

139

XPGWHT-L1-0000-00H51

93.9

XPEWHT-01-0000-00BC2

114

XPGWHT-01-0000-00EC2

100

XPEWHT-01-0000-00CC2

122

XPGWHT-01-0000-00FC2

107

XPEWHT-01-0000-00DC2

130

XPGWHT-01-0000-00GC2

114

XPEWHT-01-0000-00EC2

93.9

XPEWHT-L1-0000-00BE4

107

XPGWHT-L1-0000-00DE4

100

XPEWHT-L1-0000-00CE4

114

XPGWHT-L1-0000-00EE4

107

XPEWHT-L1-0000-00DE4

122

XPGWHT-L1-0000-00FE4

73.9

XPEWHT-L1-0000-008E7

93.9

XPGWHT-L1-0000-00BE7

80.6

XPEWHT-L1-0000-009E7

100

XPGWHT-L1-0000-00CE7

87.4

XPEWHT-L1-0000-00AE7

107

XPGWHT-L1-0000-00DE7

93.9

XPEWHT-L1-0000-00BE7

XML LED Color

Cool White

Neutral White

CCT Range Min.

Max.

5,000K

8,300K

4,000K

3,700K

5,300K

5,000K

Base Order Codes Min. Luminous Flux(lm) @ 700mA

Order Code

Group

Flux(lm)

260

XPEWHT-L1-0000-0000T5051

280

XPEWHT-L1-0000-0000T6051

200

XPEWHT-L1-0000-000LT20F6

220

XPEWHT-L1-0000-000LT30E5

240

XPEWHT-01-0000-000LT40E4

260

XPEWHT-01-0000-000LT50E4

280

XPEWHT-01-0000-000LT60E3

182

XPEWHT-01-0000-000LS60F8

200

XPEWHT-L1-0000-000LT20E7

220

XPEWHT-L1-0000-000LT30F7

240

XPEWHT-L1-0000-000LT40E6

* Other LED Series such as MX6, MCE LED can also be used in Streetlamp Application. 其他LED系列如MX6，MCE LED也可应用于LED路灯照明中。

Arrow Lighting Application Solution — Street Lamp LED Driver Design 艾睿照明应用方案 — 路灯驱动方案

STREET LAMP LED DRIVER DESIGN (路灯驱动方案) LED driver is one of the key part in street lamp lighting design. It performs constant current control, protection and power conversion for the LED. As in order to design a reliable and long life LED driver. Some of the design criteria needs to be considered and are shown as follow:

LED驱动是路灯照明设计的关键部分之一，LED驱动实施LED的恒流控制，保护功能和AC/DC转换。为了设计一个可靠的，寿命长的LED驱动，必须考虑一些设计标准，下面将介绍这些标准：

Outdoor Product Qualification 室外照明防水防尘等級： IP23 or above 或以上 EMI 电磁干扰： EN55015 class B Power Factor and Harmonics 功率因数和谐波： IEC1000-3-2 class C Protection of Lighting Strokes 雷击保护： IEC1000-4-5 Operating Temperature 操作温度： -20°C to 50°C Energy Star Life Time (outdoor) 能源之星寿命要求 (戶外)： 35000 hr Lighting Fixture Safety 照明设备安全等級： IEC60598 class 1, 2 and 3

SOLUTION A: ST L6599 STREET LAMP LED DRIVER SOLUTION 意法半导体 L6599 路灯 LED 驱动方案 AC Input

EMI Filter 滤波

Bridge Rectifier 整流

L6599 AC/DC Street Lamp LED Driver L6599 AC/DC 路灯 LED 驱动 Peak Power 最大功率

130W (瓦)

Input Voltage 电压范围

185 - 260V (伏)

Isolation 隔离

3750V (伏)

Efficiency 效率

92% or above 92%以上

EMI 电磁干扰

EN55015 Class B

PFC 功率因数

IEC1000-3-2 (PF>0.9)

PFC 功率因数

Isolation Tx and Sw 隔离变压器及开关

2nd Rectifier 次级整流

L6562 Controller 控制器

L6599 Controller 控制器

Optocoupler 光藕

Constant Current

SOLUTION B: TI LED DRIVER SOLUTION (AC/DC modular basis LED driver) 德州仪器 SN0901026 (TPS92210) 120W LED驱动 (AC/DC 模塊) EMI Filter 滤波

AC Input

Rectifier 整流

TI SN0901026 (TPS92210) AC/DC Modular LED Driver Peak Power 最大功率

120W (瓦)

Isolation 隔离

Isolated flyback 反激隔离

Input Voltage 电压范围

185V - 260V

Est. Efficiency 效率

88% or above 88%以上

EMI 电磁干扰

EN55015 class B

PFC 功率因数

IEC1000-3-2 (PF>0.9)

Flyback Tx 反激变压器

SN0901026 (TPS92210)

Optocoupler 光藕

Flyback SW 反激开关

Flyback Tx 反激变压器

SN0901026 (TPS92210)

Optocoupler 光藕

Flyback SW 反激开关

Flyback Tx 反激变压器

SN0901026 (TPS92210)

Optocoupler

2nd Rectifier 次级整流

LED at 350mA to 700mA

2nd Rectifier 次级整流

LED at 350mA to 700mA

2nd Rectifier 次级整流

LED at 350mA to 700mA

光藕

LedLink LENS

雷笛克光学透镜

Arrow lighting provide lens and optics solution on street lamp application. ARR1-R85135-L1 is a lens for street lamp application where it is high efficiency, asymmetrical beam pattern and optimized with uniform effects. It generates 85x135 degree of viewing angle which suitable for streetlighting / outdoor lighting application.

艾睿照明提供路灯照明应用的光学透镜，ARR1-R85135-L1是由雷笛克光学设计的路灯透钟，可提供 85 X 135 度的照度，良好的均匀度，高光效及不对称光束光速设计十分适合应用在路灯及室外照明。

Outlook 外观

Flyback SW 反激开关

Dimension 尺寸

* TPS92210 & SN0901026 is pin to pin compatible. TPS92210 及 SN0901026为对等型号。

Beam Pattern 光速

Arrow Asia

Arrow Lighting Application Solution – AC/DC TRIAC Indoor Lighting Application 艾睿照明应用方案 – AC/DC TRIAC 室內照明方案

LIGHTING Solution Guide

ABSTRACT

摘要

This application note introduce the design criteria of Triac dimming indoor lighting application. Arrow lighting offers products and solutions for indoor lighting application such as high efficient LED driver as well as lens/optics solution.

本应用手册介绍了Triac调光作室内照明的基本概念和要求，艾睿照明提供室内照明的LED，高效LED駆动，光学及透镜方案。

GENERAL REQUIREMENT OF TRIAC DIMMING SOLUTION FOR INDOOR LIGHTING APPLICATION TRIAC调光基本要求 Dimming Linearity: This is to define the linearity of light output from LED lamp as the firing angle change in TRIAC dimmer. Dimmer Compatible List: The LED lamp should be able to perform the same when it is dimmed by various types of dimmer, no matter by leading and trailing edge dimmer. Parallel Operation: For multiple lamp operation, one should expect to have the same linearity of various LED lamps when control by single dimmer. Flickering: No flickering is expected when the LED lamp is dimmed.

调光線性：通过可控硅调光器触发相位变化使LED的光输出达到线性的变化。调光器的兼容性：不论是用于前缘或后缘的相位调光，以及使用多种不同的调光器都不会影响LED的调光线性。并行控制：当多个LED灯由单一调光器驱动时，调光线性需保持一致。闪烁：当LED灯具进行调光时，不会出现闪烁。

LED FOR INDOOR LIGHTING APPLICATION

於室内照明应用的LED

Cree offers various kind of high power LED which fit for indoor lighting application, such as multiple chip MCE and MPL which reduce total system cost. Meanwhile, XPE warm white series delivers high quality of light output and efficacy for a single die LED which increase the competitiveness of luminaires.

在室內照明应用中，科锐提供多种不同高功率的照明级LED，如可減少系統成本的多芯片LED，包括MCE及MPL系列。另外，單芯片XPE暧白系列可提供高质素的光输出，从而增加整体灯具的竞争性。

XPE LED

Color

CCT Range Min.

Warm White 2,600K

Max.

3,700K

Base Order Codes Min. Luminous Flux(lm) Group

Flux(lm)

73.9

XPEWHT-L1-0000-008E7

80.6

XPEWHT-L1-0000-009E7

87.4

CXA20 LED

Color

CCT Range

Warm White

3,000K

Order Code

93.9

Base Order Codes Min. Luminous Flux(lm)

2,600K

3,700K

2,600K

CRI

2,600K

3,200K

–/78

MPLEZW-A1-0000-0000C040F

900

80/82

MPLEZW-A1-0000-0000D040F

700

–/78

MPLEZW-A1-0000-0000B035F

800

80/82

MPLEZW-A1-0000-0000C035F

700

–/78

MPLEZW-A1-0000-0000B030F

93.9

XPEHEW-L1-0000-00BE7

100

XPEHEW-L1-0000-00CE7

93.9

XPEHEW-H1-0000-00BE7

100

XPEHEW-H1-0000-00CE7

80.6

XPEHEW-P1-0000-009E7

87.4

XPEHEW-P1-0000-00AE7

80.6

XPEHEW-U1-0000-009E7

TRIAC 调光/非调光LED驱动艾睿照明提供多种可配调光器的LED驱动方案，它们提供良好的调光线性及电器性能参数。 EMI and Rectifier 整流及滤波

7W, 10W and 25W (瓦)

Topology 线路结构

Isolated Flyback 反激隔離

I/P Voltage 电压范围

90V - 264V (伏)

Est. Efficiency 最高效率

80% or above 80%以上

EMI 电磁干扰

EN55015 class B

PFC 功率因数

PF>0.9

PPFC 被动功率因素校正

Flyback Tx / SW 反激变压器

2nd Rectifier 次级整流

SSL2101/ SSL2103*

Optocoupler / TL431 光藕 / TL431

NXP SSL2101 Peak Power 最大功率

10W, 15W, and (25W(瓦) SSL2102)

Topology 线路结构

Isolated Flyback 反激隔離

I/P Voltage 电压范围

90V - 264V (伏)

Est. Efficiency 最高效率

80% or above 80%以上

EMI 电磁干扰

EN55015 class B

PFC 功率因数

PF>0.9

* SSL2103 is a controller offers external MOSFET solutions. SSL2103 提供外挂MOS管方案。

Buck Switch 降压开关

Filter 滤波

EMI and Rectifier EMI及整流

NS LM 3445 12W - 15W (瓦)

Topology 线路结构

Buck (降压)

I/P Voltage 电压范围

90V - 264V (伏)

Est. Efficiency 最高效率

80% or above 80%以上

EMI 电磁干扰

EN55015 class B

PFC 功率因数

PF>0.9

* LM3450 is a controller offers active PFC and isolated solutions. LM3450 提供主动PFC及隔离方案。

Non Dimming

LM3445 / LM3450*

Dimming

Min/Typical

2nd Rectifier 次级整流

Peak Power 最大功率

Flux(lm)

Order Code

800

TI SN0901026 (TPS92210)

Order Code

Group

4,300K

90 - White

Primary Sensing 初级取样

Max.

3,200K

SN0901025 (TPS92210)

Min.

2,600K

Group

Flyback Tx 反激变压器

Base Order Codes Min. Luminous Flux(lm)

CCT Range

85 - White

Flux(lm)

Dimming

80 - White

Group

Flyback SW 反激开关

PPFC 被动功率因素校正

Warm White

XPEWHT-L1-0000-00BE7

Arrow lighting offers various LED driver solutions for dimming application, they offers good linearity as well as electrical performance.

EMI and Rectifier 整流及滤波

Color

XPEWHT-L1-0000-00AE7

TRIAC DIMMING / NON DIMMING LED DRIVER SOLUTION

EMI and Rectifier 整流及滤波

XPE HEW LED

Flyback SW 反激开关

Flyback Tx 反激变压器

2nd Rectifier 次级整流

ST Viper15/25

Optocoupler 光藕

Secondary Sensing 次级取样

ST Viper15/25 Peak Power 最大功率

10W (瓦)

Topology 线路结构

Isolated Flyback 反激隔離

I/P Voltage 电压范围

90V - 264V (伏)

Est. Efficiency 最高效率

82% or above 82%以上

EMI 电磁干扰

EN55015 class B

PFC 功率因数

PF>0.9

TI — AC/DC LED Driver Solution – TPS92210DR Solution 德州仪器 — AC/DC LED 驱动方案 – TPS92210DR 方案 PART NUMBER (型号) TPS92210DR

SUPPLIER (供应商)

DESCRIPTION

描述

TPS92210 is a Green mode flyback controller from Texas Instrument. It operates at peak current and frequency modulation for optimized efficiency. To further increase the efficiency of power converter, it operates resonant valley turn on for reduced EMI and switching loss. Meanwhile, cascoded configuration of this controller can further reduce the switching loss of the MOSFET.

德州仪器TPS92210DR反邀式控制器可于峰值电流及频率控制以达至最高效能。为增加电源的整体效能，TPS92210DR运作于谐震谷底，同时串联式连接可减少MOSFET的开关损耗。

TARGET APPLICATION

目标应用

●

TRIAC dimmable LED lighting designs Residential LED lighting drivers for retrofit A19 (E27/26, E14), PAR30/38, GU10, BR Drivers for down and architectural wall sconces, pathway and overhead lighting Commercial lighting and downlights

●

IC FEATURES (IC特性) Distinctive Features 特点：

TRIAC调光LED照明设计家用LED照明，传统灯泡替换A19 (E27/26，E14)，PAR30/38， GU10，BR 筒灯建筑照明，行人道照明，大功率照明商用照明及筒灯

APPLICATION CIRCUIT FEATURES (应用电路特性) ●

●

Constant on-time enables single stage PFC 固定导通时间单级PFC Cascoded MOSFET configuration 串联式MOSFET Discontinuous conduction mode or transition mode operation 非连续导通模式 Open LED detection LED开路感测

Topology 线路结构：

Single stage flyback PFC 单级反激PFC

Protection 保护：

●

Advanced overcurrent protection 先进运流保护 Output overvoltage protection 输出过压保护 Internal over-temperature protection 内置过温保护

Switching Frequency 开关频率：Max. 130KHz 最大130KHz Driver Current 驱动电流：

Up to 1A 最高1A

Package 封装：

SO8

Peak Power 最大功率： 90W (瓦) Input Voltage 输入电压： 85 - 300Vac (伏) Output Voltage 输出电压： 19V (伏) Estimated Efficiency 预计效率：Up to 85%@220Vac input, 9Leds/700mA output 可达85%@220Vac(伏)， 9Leds/700mA输出 Regulation 校准： Can regulate the output voltage or current 可以调节输出电压或电流 Power Factor 功率因数： > 0.95

CONTROLLER BLOCK DIAGRAM (控制器原理图)

Testing Figures (测试数据) Input Power 输入功率

Output Voltage 输出电压

Output Current 输出电流

Efficiency 效能

8.57W

19V

370mA

82%

Test Condition: Output 7W / 6 LEDs Series / 20V (7W / 6 LED系列 / 20V的测试数据)

APPLICATION CIRCUIT (应用电路图)

Vin 输入电压

PF 功率因数

Efficiency 效能

THD 谐波

Iout (mA) 输出电流

90V

0.996

78.1%

4.9%

361

110V

0.990

80.2%

6.2%

365

120V

0.986

81.1%

6.3%

365

140V

0.974

82.0%

7.9%

372

Arrow Asia

TI — AC/DC LED Driver Solution – LED Lighting Power Controller 德州仪器 — AC/DC LED 驱动方案 – LED 照明控制器 PART NUMBER (型号)

UCC28811DR

LIGHTING Solution Guide

SUPPLIER (供应商)

DESCRIPTION

描述

The UCC28810 and UCC28811 are general lighting power controllers for low to medium power lumens applications requiring power factor correction and EMC compliance. It is designed for controlling a flyback, buck or boost converter operating in critical conduction mode. It features a transconductance voltage amplifier for feedback error processing, a simple current reference generator for generating a current-sense(PWM) comparator, PWM logic and a totem-pole driver for driving an external FET.

UCC28810 和 UCC28811 是一个中小功率照明应用高功率因数电源控制器，适用于设计成flyback，buck或Boost电路模式,跨导电压误差放大器，简单的电流参考比较，

TARGET APPLICATION

目标应用

●

AC input general lighting application using HB LEDs Industrial, commercial and residential lighting fixtures Outdoor lighting: street, roadway,parking, construction and ornamental LED lighting fixtures

IC FEATURES (IC特性)

●

交流输入照明应用工业，商业，家居照明户外照明 : 路灯，停车厂等

APPLICATION CIRCUIT FEATURES (应用电路特性)

Distinctive Features 特点：

Transition mode controller for low implementation cost of AC input LED lighting applications 临界模式控制低成本AC输入LED照明应用

Topology 线路结构：

Implements single stage power factor corrected LED driver 单级反激PFC控制

Protection 保护：

Two UVLO options/OVP/Open-feedback protection and enable circuits 输入过欠压 / 输出过压 / 开环保护 / EN

Peak Power 最大功率： 20W (瓦) Input Voltage 输入电压： 85 - 265Vac (伏) Output Voltage 输出电压： 40V (伏) Estimated Efficiency 预计效率：87% Regulation 校准： Nil Power Factor 功率因数： 0.99

Testing Figures (测试数据)

Switching Frequency 开关频率：Regulate 根据需要设置 Driver Current 驱动电流：

750mA (毫安)

Package 封装：

SO-8

Input Power 输入功率

Output Voltage 输出电压

Output Current 输出电流

Efficiency 效能

20.7W

40V

450mA

87%

CONTROLLER BLOCK DIAGRAM (控制器原理图)

APPLICATION CIRCUIT (应用电路图)

National Semiconductor — AC/DC LED Driver Solution – LM3445 Isolated Applications 美国国家半导体 — AC/DC LED 驱动方案 – LM3445 隔离式应用 PART NUMBER (型号)

LM3445 Isolated Applications

SUPPLIER (供应商)

LM3445 隔离式应用

DESCRIPTION

描述

LM3445 based Flyback LED driver solution that can be used to power a single LED string consisting of 4 to 10 series connected LEDs from an 185 VRMS to 265 VRMS, 50Hz input power supply. This is a two-layer board using the bottom and top layer for component placement. The demonstration board can be modified to adjust the LED forward current, the number of series connected LEDs that are driven and the switching frequency.

本方案是LM3445用在反激式拓扑驱动一串四至十个LED。输入电压从185VRMS至265VRMS，50Hz。本方案的主要特点是有很好的调光效果，它可以配合多款牌子的TRIAC调光器都不会闪烁，同时增加了Line injection线路，令PFC达到0.95。另外本方案可以调节不同的输出电流及配合不同数目的LED。

TARGET APPLICATION (目标应用) ●

●

APPLICATION CIRCUIT FEATURES (应用电路特性)

Retro-fit TRIAC dimming TRIAC 调光升级改造 Industrial, commercial, residential lighting 工业，商业，室內照明

Peak Power 最大功率： ~8W (瓦) Input Voltage 输入电压： 180V - 265V (伏) Output Voltage 输出电压： ~25V (伏) Estimated Efficiency 预计效率：up to 82% 达到82% Regulation 校准： +/- 3% below +/- 3% 以下 Power Factor 功率因数： up to 0.95 达到0.95

IC FEATURES (IC特性) Distinctive Features 特点：

Drop-in compatibility with TRIAC dimmers 可配合多款TRIAC调光器 Line injection circuitry enables PFC values greater than 0.95 Line injection线路，令PFC达到0.95 Flicker free operation 配合多款牌子的TRIAC调光器都不会闪烁 Topology 线路结构： Flyback 反激式拓扑 Protection 保护： Short Circuit Protection 短路保护 Current Limit 限流保护 Thermal shutdown 热关断保护 Switching Frequency 开关频率： Variable 可变 Driver Current 驱动电流： Up to 1A 达到1A Package 封装： MSOP-10 and SOIC-14L ●

●

APPLICATION CIRCUIT (应用电路图)

●

Testing Figures (测试数据) Input Power 输入功率

O/P Voltage 输出电压

O/P Current 输出电流

Efficiency 效能

180Vac - 265Vac

~25V

350mA

82.00%

National Semiconductor — AC/DC LED Driver Solution – LM3450 美国国家半导体 — AC/DC LED 驱动方案 – LM3450 PART NUMBER (型号) LM3450

SUPPLIER (供应商)

DESCRIPTION

描述

The LM3450 is a power factor controller (PFC) with separate phase dimming decoder. The PFC regulates an accurate output voltage while maintaining excellent power factor at the input. The phase dimming decoder interprets the phase angle and remaps it to a 500Hz PWM output. This combination of features is ideal for implementing a dimmable off-line LED driver for 10-100W loads.

LM3450是Power Factor Controller (PFC)，共增加了相位光暗译码器。本PFC调整出准确的输出电压，同時能保持非常好的功率因數，相位光暗译码器检测位相角度以提供一个500Hz的PWM输出。 LM3450 适合用在10瓦至100瓦可可调光的LED照明方案。

APPLICATION CIRCUIT FEATURES (应用电路特性)

TARGET APPLICATION (目标应用) ●

●

Dimmable downlights, troffers, and lowbays 可调光的吊灯 Indoor and outdoor area SSL 室内及室外照明

IC FEATURES (IC特性) Distinctive Features 特点：

No 120Hz LED current ripple 沒有120Hz LED电流波纹 Better line disturbance rejection 70:1 PWM 70:1 PWM调光比例 Topology 线路结构： Flyback 反激式拓扑 Protection 保护： Over-voltage protection 过压保护 Short Circuit Protection 短路保护 Over Current Protection 过流保护 Switching Frequency 开关频率：Free Running Driver Current 驱动电流： Up to 3A 达到3A Package 封装： TSSOP-16 ●

●

Testing Figures (测试数据)

Input Power 输入功率

O/P Voltage 输出电压

O/P Current 输出电流

Efficiency 效能

180Vac - 265Vac

50V

350mA

82.00%

Peak Power 最大功率： 100W (瓦) Input Voltage 输入电压： 85V - 265V (伏) Output Voltage 输出电压： 50V (伏) Estimated Efficiency 预计效率：Typical 80 to 85% 80至85% Regulation 校准： +/- 3% below +/- 3% 以下 Power Factor 功率因数： up to 0.98 达到0.98

APPLICATION CIRCUIT (应用电路图)

Arrow Asia

National Semiconductor — AC/DC LED Driver Solution – LM3464 美国国家半导体 — AC/DC LED 驱动方案 – LM3464

PART NUMBER (型号) LM3464

LIGHTING Solution Guide

SUPPLIER (供应商)

DESCRIPTION

描述

The LM3464 is a 4-channel high voltage current regulator that provides a simple solution for LED lighting applications. The LM3464 provides four individual current regulator channels and works in conjunction with external N-channel MOSFETs and sense resistors to give accurate driving current for every LED string. Additionally, the Dynamic Headroom Control (DHC) output can be interfaced to the external power supply to adjust the LED supply voltage to the lowest level that is adequate to maintain all the string currents in regulation, yielding the optimal overall efficiency.

LM3464是四通道高电压电流源控制器，它可提供一个简单的LED 照明应用。LM3464需要配四个N沟道的MOSFET以提供四个独立的电流调节通道，同时利用外置的电流感应电阻去准确调节每通道的驱动电流，LM3464增加了Dynamic Headroom Control (DHC)讯号去控制外置电源所提供的LED电压在最低水平，这样可以令到整个电源有最理想的整体效率。

TARGET APPLICATION ●

●

目标应用

Streetlights Solid state lighting solutions

●

IC FEATURES (IC特性) Distinctive Features 特点：

路灯固态照明

APPLICATION CIRCUIT FEATURES (应用电路特性)

Wide input voltage range (12V-80V) 宽电压输入(12V-80V) Dynamic Headroom Control ensures maximum efficiency Dynamic Headroom Control以提高整体效率 4 output channels with individual current regulation 四个独立的电流调节通道 Digital PWM/Analog dimming control interface Digital PWM/Analog光暗调节介面 Topology 线路结构： High Voltage Current Regulator Protection 保护： LED Fault detection LED故障检测 Over temperature protection 过温保护 Thermal shutdown 热关断保护 Under voltage lockout 欠压保护 Switching Frequency 开关频率：D20 Driver Current 驱动电流： 700mA /ch Package 封装： eTSSOP-28 ●

●

Peak Power 最大功率： ~150W (瓦) Input Voltage 输入电压： 12V - 80V (伏) Output Voltage 输出电压： Design depend 看客户设计而定 Estimated Efficiency 预计效率：up to 95% 达到95% Regulation 校准： +/-3% Power Factor 功率因数： Nil

●

Testing Figures (测试数据)

●

CONTROLLER BLOCK DIAGRAM (控制器原理图)

Input Power 输入功率

O/P Voltage 输出电压

O/P Current 输出电流

Efficiency 效能

12Vdc - 80Vdc

Nil

95.00%

APPLICATION CIRCUIT (应用电路图)

NXP — AC/DC LED Driver Solution - SSL1523 Non Dimming LED Driver Solution for Indoor Lighting Application 恩智浦 — AC/DC LED 驱动应用 - SSL1523 非调光的 LED 室内照明应用

PART NUMBER (型号) SSL1523

SUPPLIER (供应商)

DESCRIPTION

描述

The SSL1523 9W LED driver is a high performance solution for a professional non-dimmable application with multiple high power LEDs. This solution is target for indoor lighting application where it can generate 65Lm/W with Cree XPE LED and LEDLINK fixtures. SSL1523 is a build in MOSFET controller where it has various protection for LED driver application.

SSL1523 9W LED 方案主要用在非调光的LED室内照明应用这个方案与CREE XPE-LED及雷笛克的灯壳安装起来可到65Lm/W，SSL1523是一个内挂MOS管的控制器，可以提供不同的保护。

TARGET APPLICATION (目标应用) Indoor lighting, lighting bulb and retrofit 室内照明，传统灯具升级改造

IC FEATURES (IC特性) Distinctive Features 特点： Build in MOSFET, valley switching 内置MOS管、谷底开关 Topology 线路结构： Non isolated or isolated flyback 非隔离降压及隔离反激 Protection 保护： Various OVP, OCP, OTP etc. Switching Frequency 开关频率：90KHz Package 封装： SO16

APPLICATION CIRCUIT FEATURES (应用电路特性) Peak Power 最大功率： Input Voltage 输入电压： Output Voltage 输出电压： Estimated Efficiency 预计效率： Regulation 校准： Power Factor 功率因数： Driving Current 驱动电流：

8W (瓦) 85 - 132V and 180 - 260V (伏) 28 - 34V (伏) 83% or above 83%或以上 +/-5% 0.7 or above 0.7或以上 330mA (毫安)

CONTROLLER BLOCK DIAGRAM (控制器原理图)

Testing Figures (测试数据) LED number : 9LEDs

APPLICATION CIRCUIT (应用电路图)

Line voltage (v)

185

220

260

Input power (W)

9.882

10.38

10.9

PF value

0.863

0.82

0.785

Output power (W)

8.422

8.781

9.103

LED current (mA)

308.2

320.4

330.1

LED voltage

28.09

27.99

28.04

Efficiency

0.852

0.846

0.835

Arrow Asia

NXP — AC/DC LED Driver Solution - SSL2101 TRIAC Dimming for Retrofit Application 恩智浦 — AC/DC LED 驱动方案 - SSL2101 可控硅调光用于传统灯具升级改造

PART NUMBER (型号)

LIGHTING Solution Guide

SUPPLIER (供应商)

SSL2101 / SSL2102

DESCRIPTION

描述

This application presents an AC/DC LED driver solution developed by NXP SSL2101. The SSL2101 is a Switched Mode Power Supply (SMPS) controller IC that operates directly from rectified mains and also in combination with a phase cut dimmer. It is designed to drive LED devices. SSL2101 includes a high-voltage power switch and a circuit to allow start-up directly from the rectified mains voltage. Furthermore the device includes high-voltage circuitry to supply the phase cut dimmer. Target application include indoor lighting, interior lighting as well as bulb replacement/retrofit lighting.

这篇应用注释描述了采用恩智浦SSL2101的一个AC/DC LED驱动方案。 SSL2101是一款开关电源控制芯片，可直接在市电整流之后工作，也可以接一个切相的调光器。它内部包含了一个高压开关管且可以直接从市电高压启动，它可用来设计驱动LED。此外，它内部还有配合切相调光器工作的高压开关电路。它的目标应用室内照明，如灯泡的替换或者升级改造。

TARGET APPLICATION (目标应用) Retrofit lighting, Indoor lighting 室内照明/ LED升级改造照明 ** There is another SSL1523 non-dimming from NXP, contact Arrow FAE for details. 另有一款非调光的SSL1523，请垂询艾睿的技术支持工程师。

IC FEATURES (IC特性)

Distinctive Features 特点：

Built-in MOSFET, low Rds(on), valley switching and demagnetization 内置MOS管、低导通电阻、谷底开关和磁复位技术 Compatible with non-isolated buck, isolated flyback 可兼用于非隔离降压及隔离反激 OTP, OCP and short winding protection 过温过流及短路保护 RC user defined 用户定义开关频率 SO16 Valley switching reduce EMI filter 谷底开关技术可减小EMI滤波器

Topology 线路结构： Protection 保护： Frequency 开关频率： Package 封装： EMI 电磁干扰：

SSL2101 SOLUTION FOR AC/DC RETROFIT CONSTANT CURRENT APPLICATION (SSL2101调光室内照明) Peak Power 最大功率： GU10 1W to 10W, downlightup to 15W GU10 1W到10W(瓦)、射灯可高达15W(瓦) Input Voltage 输入电压： 120V or 220V (伏) Power Factor 功率因素： PF>0.9 for 120V and 220V input 功率因素达0.9以上 Estimated Efficiency 预估效率： 75% or above 75%甚至更高 Output Current 输出电流： 500mA (毫安) Dimming 调光： 0.1% to 100%, compatible to leading edge dimmer and trailing edge dimmer 可满足前切及后切的调光器 Others 其他： E-cap free design enable extended life 可不使用电解电容来延长寿命

CIRCUIT FUNCTIONAL BLOCK DIAGRAM (电路功能框)

Compatible Dimmer List — refer to NXP demoboard (相容的调光器) Manufacturer OPUS OPUS Bush-Jaeger Bush-Jaeger Bush-Jaeger Gira Everflourish Drespa

Type (Voltage V) 852.390 (230V) 852.392 (230V) 2250U (230V) 2247U (230V) 6519U (230V) 1184 (230V) EFO700D (230V) 0817 (230V)

Power 60-400 20-500 20-600 20-500 40-550 60-400 50-300 20-315

Load Ha/Inc Inc Ha/Inc Ha/Inc Ha/Inc Inc Ha/Inc Ha/Inc

Range 0.60% 0.50% 0.03% 0.07% 8.40% 1% 0.20% 3.40%

Ehamann Drespa Lutron Levitron Levitron Levitron Levitron Levitron Cooper Lutron

39 Domus (230V) 815 (230V) TG-600PH-WH (120V) L12-6641-W (120V) L02-700-W (120V) 6602-IW (120V) 6683-W (120V) R12-6631-LW (120V) 6001 (120V) MIR-600THWWH (120V)

20-500 20-500 600 600 600 600 600 600 600 600

Ha/Inc Inc Inc Inc Inc Inc Inc Inc Inc Ha/Inc

1% 1.10% 0% (off) 0% (off) 0% (off) 0% (off) 0% (off) 0% (off) 0% (off) 0.90%

AC/DC LED DRIVER WITH ISOLATED TRIAC DIMMING APPLICATION (AC/DC隔离式TRIAC调光应用)

V-

CX1 0.22u /275V

B+

MBRS3200T3 G

TVS1 BZG03C150G

0.22u /630v

TVS2 BZG03C150G

0.22u /630v

C4 25v/1 000u

10k Vref

IC2 APL431H R17

LED+

+ 10u/1 210/25V

R4 7.5k

100u

MB8 S

EEL19

470u

C6 0.1u

0.47/ 2010

R5 R7 121k

LED-

MRA4007T3G

39/2w R9 10K/1W/2512

Vcc

R13

TLZ15B

330/1 206 R10 10K/2512

10u/1 210/25V C8

BAV103

R18 10k

ZD1

R11 2.2K/1W/2512

R14 47K/ 1206

PBHV9040Z

R23

12k

100k/1206

2 3 4 5 6 4.99k

12k

R6 8 10u/1 206/16V

R20

200k

Sbleed

Drai n

Wbleed

Gnd

Vcc

Gnd

Source

Brightness

Aux

Rc2

Isen

Pwm limit

IC3

ZD2

13 12

CY1

R25 0.47/ 2010

2.2n/250VAC

11 10 9

R24 Pwmlimit

100k

IC16-SSL2101

10n R27 22k

C11

R26 15/25 12

C12 V-

100

R28

Vref

APL431H

TLZ 22B

330p

R29

10k

0.1u

16 15

R15 4.3k/ 0805

IC1

R22

470k/1206

4.99k

R16 7.5k

R21

R30

R12 2.2K/2512

470K/1206

R19

3 HCP L-817B

Q1 R8

4 NC C10

Pwm limit

AC-

V+ AC

V-

R1 1.2k/ 2W

1N40 07

BD1

2A/2 50v

F1 AC+

STMicroelectronics — AC/DC LED Driver Solution - HVLED805 意法半导体 — AC/DC LED 驱动方案 - HVLED805

PART NUMBER (型号) HVLED805

SUPPLIER (供应商)

DESCRIPTION

描述

The HVLED805 is a HV primary switcher intended for operating from the AC mains with minimum parts to provide an efficient, compact and cost effective solution for LED driving. It combines a high-performance low-voltage PWM controller chip and an 800V, avalanche-rugged power MOSFET in the same package. HVLED805 controller IC specifically designed for ZVS (zero voltage switching) fly-back LED drivers, with constant output current (CC) regulation using primary sensing feedback. This eliminates the need for the opto-coupler, the secondary voltage reference, as well as the current sense and still maintaining a good LED current accuracy. Moreover it guarantees a safe operation when short circuit of one or more LEDs occurs.

HVLED805是一个具有高压开关，可以在最小的AC输入去提供一个高效率的操作，是一个极精简并具低成本的LED驱动解决方案，在这个封装体中结合了高效率低电压的PWM控制晶片及800V额定电压的 MOSFET. 这个HVLED805的控制器采用ZVS(Zero Voltage Switching) flyback架构，与一个定电流的控制反馈，在电路中也不需要光敏开关的设计，仍旧可保持二次测的电流准确性，并且有二次测的短路保护。

TARGET APPLICATION (目标应用) Light bulb A19, candle lamp 球泡灯，蜡烛灯

IC FEATURES (IC特性)

HVLED805 AC/DC 3W APPLICATION (应用)

Distinctive Features 特点：

Peak Power 最大功率： 3W (瓦) Input Voltage 输入电压： Universal Output Voltage 输出电压： 3.4V (伏) Estimated Efficiency 预计效率：80% Regulation 校准： +/-5% Power Factor 功率因数： 0.7 or above 0.7或以上

Quasi-resonant (QR) zero voltage switching and ZVS operation 准谐振零电压开关与零电压切换操作 Topology 线路结构： Isolated flyback 隔离式flyback Protection 保护： Various, OCP and OVP etc. 短路保护与开路保护 Switching Frequency 开关频率：QR Mode 準共振式 Driving Current 驱动电流： Not specified Package 封装： SO16

CONTROLLER BLOCK DIAGRAM (控制器原理图) Testing Figures (测试数据)

APPLICATION CIRCUIT (应用电路图)

Input Voltage 输入电压

Efficiency 效能

Current 电流

115V

77.50%

0.51A

230V

78.20%

0.50A

Arrow Asia

STMicroelectronics — AC/DC LED Driver Solution – VIPER15 / VIPER25 意法半导体 — AC/DC LED 驱动方案 – VIPER15 / VIPER25

PART NUMBER (型号) VIPer15 / VIPer25

LIGHTING Solution Guide

SUPPLIER (供应商)

DESCRIPTION

描述

The device is an off-line converter with an 800V rugged power section, a PWM control, double levels of overcurrent protection, overvoltage and overload protections, hysteretic thermal protection, softstart and safe auto-restart after any fault condition removal. Burst mode operation and offers very low consumption helps to meet the standby energy saving regulations. The quasi resonant feature reduces EMI filter cost. Brown-out and brown-in function protects the switch mode power supply when the rectified input voltage level is below the normal minimum level specified for the system. The high voltage start-up circuit is embedded in the device.

VIPerx5是一个单片集成离线转换器，集成了一颗800V MOSFET和一个 PWM控制器，具有非常完备的保护功能，包括两级过流保护，过压保护，过载保护，过温保护以及软启动功能，当故障去除后，IC能自动重起。脉冲模式和极低的工作消耗使器件能轻易的满足各种认证对待机的要求。准谐振的工作模式有助于减少EMI滤波器件成本。Brown-out 功能可以在低于规格的输入电压条件下关断转换器避免损坏。此外内置的高压启动电路可以进一步简化外围电路的设计。

TARGET APPLICATION (目标应用)

VIPer25 for AC/DC 9W APPLICATION (应用)

LED driver, (others: Auxiliary power supply, SMPS for set-top boxes, DVD players) LED驱动 (其他：辅助电源、机顶盒、DVD播放器电源)

Peak Power 最大功率： 100W (瓦) Input Voltage 输入电压： 90 ~ 264Vac (伏) Output Voltage 输出电压： 31.5V ±10% Estimated Efficiency 预计效率：80% Regulation 校准： 0.29A ±20% Power Factor 功率因数： 0.8 or above 0.8或以上

IC FEATURES (IC特性) Distinctive Features 特点：

800V power section, Quasiresonant (QR) operation 800V开关管、准谐振工作模式 Topology 线路结构： Flyback 反激 Protection 保护： OCP, OVP, OTP, Brown-out 过流、过压、过温、Brown-out Switching Frequency 开关频率： Variable frequency 变频 Driving Current 驱动电流： 0.7A (drain current limitation) Package 封装： DIP7, SO16 narrow

CONTROLLER BLOCK DIAGRAM (控制器原理图) Testing Figures (测试数据) Input Power 输入功率

Output Voltage 输出电压

Output Current 输出电流

Efficiency 效率

11.97W

31.5V

0.3A

80.00%

APPLICATION CIRCUIT (应用电路图)

PART NUMBER (型号) RT8470 RT8450 RT8465

SUPPLIER (供应商)

DESCRIPTION

描述

This application note present Richtek solutions for MR16 based on different LED connection and output power. For Vout<10.5V, RT8470 buck is recommended. For Vout>18V, RT8450 boost is recommended. RT8450 buck-boost also work well with wide Vout range. The two stage solutions with RT8465 is a big improvement on MR16/AR111 design. The low voltage PFC simulates the performance of a real halogen bulb and let the electronic transformer(ET) works in normal mode. This reduces the inrush current on current MR16 design to improve the reliability. It also require smaller E-cap especially for high power application (Pout>7W), and make the ET compatibility become perfect.

本应用手册介绍立科技的MR16/AR111设计方案。对於输出电压在10.5V以下的应用，建议使用RT8470降压方案。输出电压在18V以上的，建议使用RT8450升压，而RT8450升降压的方案亦适用於极大的输出电压范围。 RT8465的两级式方案是MR16/AR111的一大进步。利用低压PFC来模拟传统卤素灯，让电子变压器在正常模式下工作。此方案可以降低目前MR16 方案中普遍存在的突波电流问题，以改善产品可靠性。使用较小的电解电容，特别是高功率(Pout>7W)的项目。同时大大的改进了电子变压器的兼容性。

IC FEATURES (IC特性) Distinctive Features 特点: The enhanced circuit design improve the ET compatibility with high efficiency 强化後的线路设计，改善了电子变压器的兼容性同时保有很高的效率 Topology 线路结构: Buck, Boost, Buck-Boost, two stage solutions based on low voltage PFC 降压、升压、升降压、以及基於低压PFC的两级式方案 Protection 保护: OCT, OVP, OTP 过流保护、过压保护、过温保护 Driving Ability 驱动能力: RT8470 up to 700mA, RT8450 up to 500mA, RT8482 as an external MOSFET option can drive up to 10A (The ratings are reduced because of the high ambient temperature inside MR16) RT8470/700mA，RT8450/500mA，RT8482 使用外挂MOS，可以驱动到10A (建议的最大电流已因考量MR16内部温度较高而调低变频)

COMPARISON ON MR16 SOLUTIONS (几种MR16方案的比较) 1. BUCK：BUCK has the lowest cost and the smallest PCB. It may also has the highest efficiency. The ET compatibility is reasonable after the improvement of new circuit design. One significant drawback is the output current may drop due to the input voltage drop. This become worse when the test condition include input 90V to a 110V ET or input 200V to a 220V ET. This will reduce the output luminance.

降压方案有最低的成本跟最小的PCB。同时也有可能是所有方案里效率最高的。电子变压器在线路改善後也提高到了合理的程度。此方案最大的缺点在於当输入电压过低时，输出电流会下降，特别是当测试规格包括将110V的ET输入90V或是220VET输入200V。这会导致输出亮度下降。

2. BOOST：The cost and PCB size of BOOST will be higher than BUCK. The efficiency will also be lower than BUCK but no big difference. The LED current will be consistent even the input voltage drop. This solution also offer a better ET compatibility than buck topology.

升压方案需要比较降压稍高的成本跟较大的PCB。效率也会稍微低一点。但是尽管在输入电压下降时，仍能维持很好的输出一致性。这方案同时有较好的电子变压器兼容性。

3. BUCK-BOOST：BUCK-BOOST need higher cost and larger PCB. The efficiency will also be lower. Suggest not to have LED output voltage between 10.5V~18V to avoid using this topology.

升降压结构需要较高的成本及较大的PCB，效率也会比较低，建议尽量不要选择LED输出电压落在10.5V~18V之间以避免使用到升降压结构。

4. RT8465 Two Stage Solution：This topology has very good ET compatibility and also very good reliability due to smaller inrush current. But the PCB size will be difficult to fit into a regular MR16. It is good for higher power solution that can offer more space for driver board.

RT8465的两级式结构有很好的电子变压器兼容性以及因为较低的突波电流带来较高的可靠性，但是因为整体方案需要较大的PCB，比较适合输出功率较高，灯体较大的案子。

RT8470 SOLUTION FOR MR16 (基于RT8470的MR16方案)

RT8465 TWO STAGE MR16/AR111 SOLUTION (基于RT8465的MR16/AR111两级式方案)

Infineon — AC/DC LED Driver Solution - 120W LED Driver Solution for Streetlighting Application 英飞凌 — AC/DC LED 驱动方案 - 120W LED 路灯照明驱动方案

PART NUMBER (型号) TDA4863

ICE2HS01G

ICE3BR4765JG

BCR450

Arrow Asia

LIGHTING Solution Guide

SUPPLIER (供应商)

DESCRIPTION

描述

This application note introduced a high efficiency LED driver solution by Infineon. It targets on application where streetlighting or outdoor lighting application. Overall efficiency can achieve 92% or above. By multiple driving rail, this design increased overall reliability as well as product quality.

这个应用笔记介绍了Infineon的高效LED 驱动方案。主要针对路灯照明和户外照明。整体效率能做到≥92%。通过多级并用，提高了整体可靠性和产品的性能。

TARGET APPLICATION

目标应用

Streetlamp, floodlight, outdoor lighting application

路灯，泛光灯，室外照明

APPLICATION CIRCUIT FEATURES (应用电路特性) Peak Power 最大功率： 120W (瓦) Input Voltage 输入电压： 90V - 264V (伏) Output Voltage 输出电压： 37V - 48V primary stage AC/DC输出 Estimated Efficiency 预计效率： 90% or above 90%或以上 Regulation 校准： +/-3% Power Factor 功率因数： ≥0.92 Driving Current 驱动电流： 700mA (毫安) Output Channel 输出通道： 4 channels 4路 Operating Temperature 工作温度：-20°C to 50°C

Electrical Testing Figures (电气测试参数) Input (输入)

Output (输出)

AC Voltage (V) 交流电压

Power (W) 输入功率

PFC 功率校正因素

DC Voltage (V) 输出直流电压

Total Current (A) 输出直流

Power (W) 输出功率

Total System Efficiency 整体效率

130

112.9

0.992

39.84

2.56

102.0

90.34%

150

112.3

0.987

39.77

2.57

102.2

91.01%

170

111.8

0.979

39.73

2.57

102.1

91.33%

190

111.1

0.963

39.70

2.57

102.0

91.84%

210

110.7

0.958

39.65

2.57

101.9

92.05%

230

110.2

0.943

39.45

2.57

101.4

92.00%

250

110.2

0.926

39.54

2.57

101.6

92.21%

265

110.2

0.910

39.50

2.57

101.5

92.16%

APPLICATION CIRCUIT (应用电路图)

4 Channels LED Driver BCR450 Board BCR450 LED 驱动半 4 路输出

SHINRY — AC/DC LED Driver Module – T8 Tube LED Driver 欣锐特 — AC/DC LED 驱动模块 – T8 日光灯管驱动

SUPPLIER (供应商)

PART NUMBER (型号) LRC160-42WGB-7DE LRC540-42WGB-7DE LRC140-52WGB-7DE

LRC430-52WGB-7DE

INTRODUCTION

简介

Headquartered in Shenzhen China, Shinry Technologies is a world-class electronic enterprise specialized in design, manufacture, marketing & sales of highly reliable LED drivers with ultra high efficiency, HEV/EV DC-DC converter, top-end customized power supply products. As a national high-tech enterprise, Shinry has set up a Green-Lighting R&D center since 2006 and has entered LED industry comprehensively since 2008. Shinry provides 3W to 300W series of LED drivers for indoor lighting, outdoor lighting, LED display as well as intelligent control system.

深圳市欣锐特科技有限公司，是一家以节能减排、新能源产业为核心的国家级高新技术企业，提供高效率、高功率密度、小型化、智能化、高可靠性的电力电子解决方案。产品线涵盖LED照明驱动电源、新能源汽车DC-DC变换器总成、高端定制电源。公司于2006年创立绿色照明研发中心，2008年开始全面进军LED产业，主要产品应用包括LED户外照明、室内照明、LED显示屏专用驱动电源及照明智能控制系统等。

DESCRIPTION AND FEATURES

描述和特性

Internal LED driver for T8 tube; Isolated high-efficiency design; Output current:160mA-540mA with corresponding output voltage: 30-42V; Output current:140mA-430mA with corresponding output voltage: 42-52V; Multi protection functions: OVP, OLP, SCP, Soft start; CE certificated; UL, FCC, TUV, ETL, PSE, CCC qualified;

LED日光灯内置恒流驱动电源系列，隔离型高效方案设计；输出电流适用范围：160mA~540mA (毫安)，对应输出电压：30~42V (伏)；输出电流适用范围：140mA~430mA (毫安)，对应输出电压：42~52V (伏)；多项保护功能：OVP、OLP、SCP、Soft start；通过CE，符合 UL、FCC、TUV、ETL、PSE、CCC多项认证。

APPLICATION

应用

Suitable for T5, T8, T10 LED tube; Power: 5W-24W

适用于T5、T8、T10日光灯管，功率范围5W-24W (瓦)

PRODUCT FEATURES (产品特性) Part No. 产品编号 Input Voltage 输入电压

LRC160-42WGB-7DE

LRC540-42WGB-7DE

LRC140-52WGB-7DE

LRC430-52WGB-7DE

90 ~ 264Vac

Output Voltage 输出电压

30 ~ 42V

42 ~ 52V

Output Current 输出电流

160mA

540mA

140mA

430mA

22W

Power Range 输出功率 Efficiency 效率

78%

85%

78%

87%

Power Factor 功率因数

≥0.90

Isolation Voltage 耐高压

3750V

Life Time 寿命

50000H

245 x 18 x 11mm

Reference Size 参考尺寸

APPLICATION NOTES

客户在进行LED日光灯管组装时，灯管连接电源所用线材需注意以下事项，将对整灯EMC测试结果有很好帮助，余量更足：

1. Wire rod length recommendation: please keep the AC input wire long enough for convenient installation, and keep the wire rod ideally less than 5cm between the LED base board and the power supply output terminal.

1. 连接线长度建议：AC输入线尽量长，连接灯板的LED+/LED–与电源输出端的线尽量短，少于5cm为宜。

2. If the two wire cords of the input or output are separated, please twist them as hard as possible. If the two wire cords are parallel, suggest using a bonded wire.

应用提示

When installing the LED tube, please always pay special attention to the following key points about the wire rod that connect the power supply with the LED base board, which will greatly help improve EMC test result for the whole appliance:

2. 电源输入 / 输出端线材若采用分离的二根线，则建议作绞合动作，且在不影响组装及使用情况下绞合密度越大越好；若采用并行的二根线，则选用粘合在一起的为宜。

SHINRY — AC/DC LED Driver Module – LED Street Lamp, Tunnel Light CC Driver 欣锐特 — AC/DC LED 驱动模块 – LED 路灯、隧道灯恒流驱动 PART NUMBER (型号) LLC80-4035WNF

LIGHTING Solution Guide

SUPPLIER (供应商)

LLC120-6035WNF LLC200-10035WNF

LLC150-8035WNF

Arrow Asia

DESCRIPTION AND FEATURES

描述和特性

LED waterproof constant current power supply with multi-channel output; Highly-Reliable design; Stable application; Constant current output with 4 to 10 Channels, IP 67 waterproof; Protect functions: OVP, OCP, SCP, OTP; CE certificated; UL, FCC, TUV, ETL, PSE, CCC qualified;

LED防水型多路恒流驱动电源系列，高可靠性方案设计，应用稳定； 4路–10路恒流输出，防水等级IP67；保护功能：OVP、OCP、SCP、OTP；通过CE，符合UL、FCC、TUV、ETL、PSE、CCC多项认证。

APPLICATION

应用

For LED street lamp, LED tunnel light

LED路灯、隧道灯

PRODUCT FEATURES (产品特性) Part No. 产品编号

LLC80-4035WNF

LLC120-6035WNF

LLC150-8035WNF

LLC200-10035WNF 90 ~ 264Vac

Input Voltage 输入电压

90 ~ 264Vac

Output Voltage 输出电压

46 ~ 51V

Output Current 输出电流

350mA / 路(4路)

350mA / 路(6路)

350mA / 路(8路)

46 ~ 51V 350mA / 路(10路)

Power Range 输出功率

80W

120W

150W

200W

Efficiency 效率

≥89%

≥90%

Power Factor 功率因数

≥0.93

≥0.95

Isolation Voltage 耐高压

1500V

Life Time 寿命

50000H

173 x 80 x 45mm

229 x 90 x 45mm

Reference Size 参考尺寸

SHINRY — AC/DC LED Driver Module – LED Display Driver 欣锐特 — AC/DC LED 驱动模块 – LED 屏显示驱动 PART NUMBER (型号) LBV200-5WTU

LBV200-5WHK

LBV300-5WHK

SUPPLIER (供应商)

DESCRIPTION AND FEATURES

描述和特性

LED power supply for display; efficiency above 90%, PF above 0.98; Thickness: super-thin type 26mm only, and rectangle type 32mm; Working temperature: -40°C ~ 80°C; Protect functions: OVP, OCP, SCP, OTP; CE certificated; UL, FCC, TUV, ETL, PSE, CCC qualified;

LED显示屏驱动电源系列，效率高达90%，PF值0.98以上；超薄款厚度仅为26mm，条形款高度仅为32mm，外形精巧；工作温度：-40°C ~ 80°C；保护功能：OVP、OCP、SCP、OTP；通过CE，符合UL、FCC、TUV、ETL、PSE、CCC多项认证。

APPLICATION

应用

For LED super-thin display, rectangle display use

LED超薄显示屏、条形显示屏

PRODUCT FEATURES (产品特性) Part No. 产品编号

LBV200-5WTU

LBV200-5WHK

LBV300-5WHK

Input Voltage 输入电压

90 ~ 264Vac

4.6 ~ 5.5V

4.6 ~ 5.4V

Output Voltage 输出电压 Output Current 输出电流

40A

60A

Power Range 输出功率

200W

300W

Efficiency 效率

≥90%

Power Factor 功率因数

≥0.98

Isolation Voltage 耐高压

3000V

Life Time 寿命

50000H

221 x 60 x 32mm

200 x 115 x 26mm

212 x 115 x 26mm

Reference Size 参考尺寸

RECOM — High Power DC/DC LED Driver Module (RCD Series) RECOM — 大功率 DC/DC LED 驱动模块 (RCD 系列)

PART NUMBER (型号)

RCD Series

SUPPLIER (供应商)

RCD系列

DESCRIPTION

描述

The RCD family offers a variety of DC input LED driver modules with constant current output from 300mA up to 1.2Amps. The converters have a comprehensive specification, such as: high efficiency (up to 97%), wide input voltage range, very low output dropout voltage, 2 independent dimming options (PWM and 0-10 analogue), a design hours up to 600,000 hours, and 3 possible packages (through hole, wired and SMD).

RCD系列产品提供具有300mA到1.2A恒流输出的各种DC输入LED驱动器模块。这些转换器的规格相当全面：高效率(高达97%)，宽输入电压范围、极低的输出压差、2个独立的调光选项(脉宽调制和0-10V模拟调光)、长达600,000小时的设计寿命，以及三种可能的封装(通孔插入式封装、引线封装和表面贴装)。

PRODUCT FEATURES

产品特性

• • • • • • •

All in one! No need for external components 2 independent dimming options that can be used at the same time RCD-W suitable for outdoors/underwater applications (IP67) High efficiency First SMD DC LED driver module in the market! (RCD24/PL) Extremely low profile (only 6.6mm) - (RCD24/PL) Built-in Class A or Class B EMC filter (RCD24/PL)

集多种功能于一体！无需外部元器件 2个可同时使用的独立调光管脚选项 RCD-W适用于室外/水下应用(IP67) 高效率市面上首款采用SMD封装的DC LED驱动器模块！(RCD24/PL) 极低的外形尺寸(仅6.6mm) - (RCD24/PL) 内置A级类或B级类EMC滤波器(RCD24/PL)

RECOM - High Power DC/DC LED Drivers (RCD) RCD24

Part No. 产品编号 Power Range 输出功率 Voltage In 输入电压 Output Current 输出电流

Mounting 组装方式 Other Features 其他特性

1 ~ 43W

1 ~ 25W

1 ~ 43W

1 ~ 25W

4.5 ~ 36VDC

2 ~ 35V

PWM and 0-10 Analogue

Flying Leads

Open Frame SMD

IP67 Rated Size: 22.1 x 12.55 x 8.5mm

Size: 21 x 11.4 x 10mm

Through Hole (Pins) 97% Efficiency Size: 22.1 x 12.55 x 8.5mm

Architectural lighting Decorative lighting Theatrical lighting (stage lighting) LED displays Outdoor lighting Freezer lighting Underwater and marine applications Backlight LED Solar powered lighting Landscape lighting Fluorescent replacement Cabinet lighting

PACKAGE DIMENSION (封装尺寸) - RCD24

RCD24-OF

4.5 ~ 36VDC

TARGET APPLICATION • • • • • • • • • • • •

RCD24-W

300mA, 350mA, 500mA, 600mA, 300mA, 350mA, 500mA, 600mA, 300mA, 350mA, 500mA, 600mA, 300mA, 350mA, 500mA, 600mA, 700mA, 1000mA, 1200mA 700mA 700mA, 1000mA, 1200mA 700mA

Voltage Out 输出电压 Dimming 调光

RCD24-PL

Surface Mount Pinless Class A or Class B EMC filter built-in Size: 31 x 11.4 x 6.6mm

应用目标 • • • • • • • • • • • •

建筑照明装饰照明剧场照明(舞台照明) LED显示户外照明冰箱照明水下应用和航海应用背光LED 太阳能照明景观照明荧光灯的替代橱柜照明

RECOM — High Power AC Input LED Driver Module (RACD60 Series) RECOM — 大功率 AC 输入 LED 驱动模块 (RACD60 系列)

PART NUMBER (型号)

RACD60 Series

SUPPLIER (供应商)

RACD60系列

DESCRIPTION

描述

The RACD60 series is RECOM’s first high power AC input LED driver module. It has been designed to meet the requirements of the newest and brightest LEDs in the market. With an adjustable output current from 700mA up to 4.2Amps, the RACD60 can drive almost any LED in the market. The dimensions of the package, only 4”x2”, makes it one of the smallest 60Watts AC input LED drivers in the industry.

RACD60系列是RECOM首款大功率AC输入LED驱动器模块。该系列被设计成满足市场上最新最亮LED的要求。RACD60系列具有700mA到4.2A 的可调输出电流，可用来驱动市场上几乎所有的LED。封装尺寸仅 4”×2”，是业界最小的60W AC LED驱动器之一。

PRODUCT FEATURES

产品特性

• • • • • • • • •

Universal AC input Dual mode CV and CC Adjustable current limit Constant current up to 4.2Amps Power factor corrected High efficiency 70,000 hours of design lifetime Ultra compact package (4”x2”) IP67 Optional

通用AC输入双模CV和CC 可调电流限制高达4.2A的恒流功率因子校正高效率 70,000小时的设计寿命超小型封装(4”×2”) IP67可选

RECOM - High Power AC LED Driver (RACD60 Series) Part No. 产品编号 Power Range 输出功率 Voltage In 输入电压 Current Adj. 输出电流范围 Voltage Out 输出电压 Preset Current 设定输出电流 Mounting 组装方式 Other Features 其他特性

RACD60-4200

RACD60-1050

RACD60-700

60W

45W

90 ~ 264VAC

3570 ~ 4200mA

1700 ~ 2500mA

1400 ~ 2140mA

825 ~ 1250mA

700 ~ 850mA

33.5 ~ 48V

38 ~ 54V

11 ~ 13.5V

17 ~ 24V

19 ~ 28V

4200mA

2400mA

1400mA

1050mA

700mA

Open Frame

PFC>0.9, 85% Efficiency PFC>0.9, 87% Efficiency PFC>0.9, 89% Efficiency PFC>0.9, 89% Efficiency PFC>0.9, 89% Efficiency Size: 101.6 x 50.8 x 28mm Size: 101.6 x 50.8 x 28mm Size: 101.6 x 50.8 x 28mm Size: 101.6 x 50.8 x 28mm Size: 101.6 x 50.8 x 28mm

Outdoor lighting Downlights Parking lighting Street lighting Pendant lighting Landscape Fluorescent replacement Panel replacements Theatrical lighting

PACKAGE DIMENSION (封装尺寸) - RACD60

RACD60-1400

90 ~ 264VAC

TARGET APPLICATION • • • • • • • • •

RACD60-2400

应用目标 • • • • • • • • •

室外照明筒灯位置灯街灯吊灯景观照明荧光灯的替代面板的替代剧场照明

Arrow Asia

TE Connectivity — SMT Poke In Lighting Connector TE Connectivity — SMT 插入式照明连接器 PART NAME (产品)

LIGHTING Solution Guide

SUPPLIER (供应商)

SMT Poke-In Lighting Connector SMT插入式照明连接器

DESCRIPTION

描述

The SMT Poke-In Lighting Connector is 2-position, low profile SMT wire Poke-In connector is designed for LED lighting applications. This connector is a perfect product which can prevent cold soldering in manufacturing process. TE Connectivity Poke-In connector is available in surface mount tape & reel packaging. Poke-In connector is designed to accept a wide range of wire sizes and types.

TE Connectivity SMT插入式照明连接器系列拥有1位和2位。该小型化连接器是专门为照明设计，不但能帮助提高产能，而且可防止或降低因传统手工焊接可能带来的欠温焊接风险及潜在的虚焊假焊风险。TE Connectivity 插入式照明连接器有表面贴装SMT及通孔引脚设计两种。并拥有为SMT工艺的编带及卷状包装。并适合较宽范围的引线和线型。

APPLICATION (应用) LED light string connections, lighting control, MCPCB connection LED 灯串，灯条及其他各种模块连接，照明控制等其他线对板的PCB连接

SPECIFICATION (技术指标) Electrical 电气： 1500V AC dielectric 绝缘电压1500V AC 250VAC / 4A 工作电压/电流250VAC / 4A 250VDC / 4A 工作电压/电流250VDC / 4A Mechanical 机械：Operating temperature : -25˚C to +105˚C 工作温度 : -25˚C to +105˚C Wire retention : 5 lb. minimum 导线保持力 : 至少抵抗5磅的拉力 Materials 材料： Housing : UL 94V-0 high temperature resistant thermoplastic 塑壳 : UL 94V-0 耐高温热塑材料 Contact : copper alloy, tin over nickel plating 触点 : 铜合金、镍底镀锡

SAFETY & REGULATIONS (安全和规范) Safety Standard： Design objectives : 108-2284 产品规格 : 108-2284 安全规格 UL and cUL recognized, file No.E28476 UL与cUL认证，文件编号E28476 (18, 20, 22 AWG Solid) (18, 20, 22 AWG实芯) (18, 20 AWG Prebond) (18, 20, AWG预装） (18 AWG 7, 9, 16 Strand) (18 AWG 7, 9，16多芯) Application specification : 114-13194 应用规范: 114-13194

TE Connectivity — Micro Poke-In Wire SSL Connector TE Connectivity — 微型插入式 SSL 连接器 PART NAME (产品) Micro Poke-In Wire SSL Connector

SUPPLIER (供应商) 微型插入式SSL连接器

DESCRIPTION

描述

The Micro Poke-In Wire SSL connector is a low profile, printed circuit board connector specifically designed for LED lighting applications. The connector is currently available in a one position version that accepts 24 and 26 AWG solid wire only. This connector is a perfect products which can prevent cold soldering in manufacturing process.

TE Connectivity微型插入式SSL连接器(1位)，是专门为照明设计，不但能帮助提高产能，而且可防止或降低因传统手工焊接可能带来的欠温焊接风险及潜在的虚焊假焊风险。TE Connectivity微型插入式SSL连接器表面贴装SMT设计,并拥有为SMT工艺的编带及卷状包装。并适合较宽范围的引线24AWG和26AWG单股线。

APPLICATION (应用) LED channel letter lighting strips, general illumination LED fixtures, architectural cove and valence lighting, digital signage, LED module, available for COB application LED槽型字，普通照明灯具(如球泡灯)，建筑照明灯条及数字显示，其他各种模块 (广告照明灯箱) 连接，和COB相关应用

SAFETY & REGULATIONS (安全和规范) UL and cUL recognized, file No.E28476 UL与cUL认证，文件编号E28476 (24, 26 AWG Solid) (24, 26 AWG实芯) Product specification 产品规格: 108-78810 Application specification 应用规范: 114-5482

Remarks: Nothing herein shall be understood as a guarantee for the products to be provided. 此间描述并非对产品所作之保证。

SPECIFICATION (技术指标) Electrical 电气： 1500V AC dielectric 绝缘电压1500V AC 250VAC/3A 工作电压/电流250VAC /3A 250VDC/3A 工作电压/电流250VDC /3A Mechanical 机械：Operating temperature : -25°C to +130°C 工作温度 : -25°C to +130°C Wire retention: 6 N minimum 导线保持力 : 至少抵抗6牛的拉力 Materials 材料： Housing : UL 94V-0 high temperature resistant thermoplastic 塑壳 : UL 94V-0 耐高温热塑材料 Contact : Copper alloy, tin over nickel plating 触点 : 铜合金，镍底镀锡

TE Connectivity — Inverted SMT Thru Board Connector TE Connectivity — SMT 反向通板连接器 PART NAME (产品)

SUPPLIER (供应商)

Inverted SMT Thru Board Connector

SMT反向通板连接器

DESCRIPTION

描述

The Inverted SMT Thru Board Connector provides a means to bring power to LED aluminum clad and FR4 boards from the underside of the pc board. It eliminates wire dress management issues with discreet wire leads around the surface of the LED pc board and accepts 2 thru 6 Position.

该SMT反向通板连接器为电源从LED铝基板和FR4板的背部引入提供了一种便捷方法。它消除了引线在LED PC板上的不美观及可能的挡光阴影问题。该系列拥有2到6位连接器。

APPLICATION (应用) LED lighting controls, indoor and outdoor lighting fixtures, general LED illumination fixtures, various non-lighting applications that require wire dress connections below the pc board LED照明控制，室内外照明灯具 ; 普通照明灯具 ; 各种需要从PC板下进线的非照明应用

SPECIFICATION (技术指标) Electrical 电气： Operating Voltage 工作电压: 50VAC / 50VDC Operating Current 工作电流: #24 AWG – 3A, #26 AWG – 2.5A, #28 AWG – 1.5A Mechanical 机械：Housing : 94 V0 rated high temperature resistant thermoplastic 塑壳: UL 94V-0 耐高温热塑材料 Contacts : Tin over nickel plated copper alloy 触点: 铜合金、镍底镀锡 Materials 材料： Operating temperature 允许温度 : -40°C to +105°C

SAFETY & REGULATIONS (安全和规范) UL 1977, file No. E28476 UL 1977，文件编号E28476 Product specification 产品规格: 108-2376 Application specification 应用规范: 114-13245

TE Connectivity — IDC SSL Connector TE Connectivity — IDC SSL 连接器 PART NAME (产品) IDC SSL Connector

SUPPLIER (供应商) IDC SSL连接器

DESCRIPTION

描述

The IDC SSL connector series (1P/2P/3P/4P) are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto LED printed circuit boards. These connectors use TE Connectivity proven insulation displacement technology to provide a robust, stable electrical and mechanical power connection to single or multiple printed circuit boards in solid state lighting and non-lighting applications.

IDC SSL 连接器系列为绝缘刺破 (IDC) SMT 和通孔线对板连接器(1/2/3/4 位)，该产品设计用于快速、无需工具地将散线端接到LED印刷电路板上。这些连接器采用了泰科电子的经过验证的绝缘刺破式连接技术，从而为在固态照明和非照明应用中的单个或多个印刷电路板提供强大而稳定的电气和机械设计的电源连接。

APPLICATION (应用) LED lighting controls, general illumination LED fixtures, connecting strings of pcb LED light modules LED照明控制，常用LED照明灯具，连接PCB LED照明模块串

SPECIFICATION (技术指标) Electrical 电气： Operating current 工作电流: 8 A(18 AWG) Operating voltage 工作电压: 250VAC / 250VDC Dielectric withstanding voltage 绝缘电压: 1500VAC Mechanical 机械：Operating temperature 工作温度: -40°C to +105°C Materials 材料： Housing : UL 94V-0 high temperature resistant thermoplastic 塑壳 : UL 94V-0 耐高温热塑材料 Contact : Copper alloy, tin over nickel plating 触点 : 铜合金，镍底镀锡

SAFETY & REGULATIONS (安全和规范)

UL Recognized IDC SSL Connector application specification: 114-13266 IDC SSL 连接器应用说明: 114-13266 IDC SSL Connector product specification: 108-2404 IDC SSL 产品指标: 108-2404

Remarks: Nothing herein shall be understood as a guarantee for the products to be provided. 此间描述并非对产品所作之保证。

TE Connectivity — Hermaphroditic Blade and Receptacle Connector TE Connectivity — 插片插座一体式板对板连接器 PART NAME (产品)

Arrow Asia

LIGHTING Solution Guide

SUPPLIER (供应商)

Hermaphroditic Blade and Receptacle Connector 插片插座一体式板对板连接器

DESCRIPTION

描述

The Hermaphroditic Blade and Receptacle connector is a new SMTconnector and is intended for use with in-line board-to-board applications. It is a connector system which mates and unmates horizontally and vertically -3 axis mating. Meanwhile, it can be articulated from 90 to 180 degree.

该插片插座一体式板对板连接器是一款新的SMT连接器专为板对板间连接应用设计。该系列产品允许水平及垂直立体式电气连接，也就意味着可以 90度到180度的绞接。同样，也非常有利于水平向或垂直向维修替换操作。

APPLICATION (应用) LED lighting modules, incandescent lighting strips, channel lettering LED照明模块，LED照明灯条，LED字符串等

SPECIFICATION (技术指标) Electrical 电气： Operating current 工作电流: 6 AMPS Operating voltage 工作电压: 125VAC / 125VDC Dielectric withstanding voltage 绝缘电压: 1500VAC Mechanical 机械：Operating temperature 工作温度: -40°C to +105°C Materials 材料： Housing : UL 94V-0 high temperature resistant thermoplastic 塑壳 : UL 94V-0 耐高温热塑材料 Contact : Copper alloy, tin over nickel plating 触点 : 铜合金，镍底镀锡

SAFETY & REGULATIONS (安全和规范) UL and cUL recognized, file No.E28476 UL与cUL认证，文件编号E28476 Product specification 产品规格: 108-2342 Application specification 应用规范: 114-13225

TE Connectivity — Mini Hermaphroditic Blade and Receptacle Connector TE Connectivity — 小型化插片插座一体式板对板连接器 PART NAME (产品)

SUPPLIER (供应商)

Mini Hermaphroditic Blade and Receptacle connector 小型化插片插座一体式板对板连接器

DESCRIPTION

描述

The Mini Hermaphroditic Board to Board connector is a new SMTconnector and is intended for use with in-line board-to-board applications where requests low profile solutions. It is a connector system which mates and unmates horizontally and vertically, which design is also for maintenance.

该小型化插片插座一体式板对板连接器是一款新的SMT连接器专为板对板间连接应用设计，特适合所需小尺寸解决方案的应用领域。该系列产品允许水平及垂直立体式电气连接。同样，也非常有利于水平向或垂直向维修替换操作。

APPLICATION (应用) LED decoration /cabinet /advertisement /refrigerator /furniture lighting etc. LED装设性照明、橱柜照明、广告灯箱、冰柜、家具照明等

SPECIFICATION (技术指标) Electrical 电气： Operating current 工作电流: 3 AMPS Operating voltage 工作电压: 300VAC / 300VDC Dielectric withstanding voltage 绝缘电压: 1600VAC Mechanical 机械：Operating temperature 工作温度: -40°C to +105°C Height 高为: 2.3mm Materials 材料： Housing : UL 94V-0 high temperature resistant thermoplastic 塑壳 : UL 94V-0 耐高温热塑材料 Contact : Copper alloy, tin over nickel plating 触点 : 铜合金，镍底镀锡

SAFETY & REGULATIONS (安全和规范) UL Recognized Product specification 产品指标: 108-106050 Application specification 应用规范: 114-106050

Remarks: Nothing herein shall be understood as a guarantee for the products to be provided. 此间描述并非对产品所作之保证。

TE Connectivity — Screw Down Jumper TE Connectivity — 螺丝旋紧式板对板电气连接跨接器 PART NAME (产品) Screw Down Jumper Assembly

SUPPLIER (供应商) 螺丝旋紧式板对板电气连接跨接器

DESCRIPTION

描述

The board-to-board, screw down jumper assembly provides the electrical connection between two adjacent printed circuit boards in a string of printed circuit boards.

该螺丝旋紧式板对板电气连接跨接器适合两块相邻印刷电路制板间的电气连接，并结构固定。安装方便，连接可靠。

APPLICATION (应用) T8–T12 retrofit, LED lighting strips, LED lighting controls, channel lettering T8–T12 LED灯管，LED灯条，LED照明控制，LED字符串

SPECIFICATION (技术指标) Electrical 电气： Operating Current 工作电流: 5A Operating Voltage 工作电压: 250VAC / 250VDC Dielectric withstanding voltage 绝缘电压: 1500VAC Mechanical 机械：Operating temperature 工作温度: -40°C to +105°C Mating cycles 插拔次数: 10 Screw down torques 螺丝扭矩: 0.11 Nm [0.97 Lb-In] max Materials 材料： Contact : Tin plated copper alloy 端子: 铜合金，镀锡 Housing : UL 94 V0 thermoplastic 塑壳 : UL 94 V0 耐高温热塑材料

SAFETY & REGULATIONS (安全和规范) ETL Recognized, file No. 3178692CRT-001 to UL (1977) ETL认证，文件编号3178692CRT-001 to UL (1977) Screw down jumper assembly application specification: 114-13260 螺丝旋紧式板对板电气连接跨接器应用说明: 114-13260 Screw down jumper assembly product specification: 108-2392 螺丝旋紧式板对板电气连接跨接器产品指标: 108-2392

TE Connectivity — G13 SMT Connector and End Cap Cover TE Connectivity — G13 灯头 SMT 连接器及端盖 PART NAME (产品) G13 SMT Connector and End Cap Cover

SUPPLIER (供应商) G13灯头SMT连接器及端盖

DESCRIPTION

描述

The G13 Style SMT Assembly and End Cap Cover are designed for use on printed circuit board LED strip lighting modules in T8 and T12 fluorescent retrofit LED tubes. The End Cap Cover is designed to interface with G13 Style SMT Assembly, heat sink and tube. (Custom configurations are available upon special request)

该G13灯头SMT连接器及端盖是专门为安装在T8和T12灯管里的LED电路板连接所设计。该端盖可匹配G13 SMT连接组件，散热和玻璃管。 (可接受客户定制化尺寸改动特殊要求）

APPLICATION (应用) Standard T8 and T12 fluorescent fixtures

标准的T8和T12 LED灯管

SPECIFICATION (技术指标) Electrical 电气： Operating current 工作电流: 2A Operating voltage 工作电压: 250VAC / 250VDC Dielectric withstanding voltage 绝缘电压: 1500VAC Mechanical 机械：Operating temperature 工作温度: -40°C to +120°C Materials 材料： Mating cycles 插拔次数 : 10 G13 SMT Assembly: UL 94 V0 rated high temp resist thermoplastic G13 SMT组件 : UL 94V-0 耐高温热塑材料 End cap cover 端盖 : UL 94 V0 Thermoplastic 耐高温热塑材 Contacts 灯头端子 : Tin plated brass 铜，镀锡 SMT hold down 端子 : Tin plated brass 铜，镀锡

SAFETY & REGULATIONS (安全和规范) ETL Recognized, file No. 3177705CRT-001 to UL 8750 and UL 1993 Standards ETL认证，文件编号3177705CRT-001 to UL 8750 和 UL 1993标准 Product specification 产品指标: 108-2393 Application specification 应用规范: 114-13255 41

Remarks: Nothing herein shall be understood as a guarantee for the products to be provided. 此间描述并非对产品所作之保证。

Arrow Asia

TE Connectivity — SlimSeal SSL Connector TE Connectivity — SlimSeal SSL 连接器 PART NAME (产品) SlimSeal SSL Connector

LIGHTING Solution Guide

SUPPLIER (供应商) SlimSeal SSL连接器

DESCRIPTION

描述

TE Connectivity SlimSeal SSL connectors are low profile, single row connectors (2/3/4 -positions) developed for indoor and outdoor LED lighting applications. These connectors provide low power, sealed solutions for free hanging, wire-to-wire interconnects and for robust, stable electrical and mechanical wire-to-board connections used in solid state lighting. SlimSeal SSL connector is designed to accept a wide range of wire sizes.

TE Connectivity SlimSeal SSL连接器是一款专为室内外LED照明应用而开发的薄型单排连接器(2位/3位/4位)。这些连接器为固态照明中使用的自由悬挂式线对线互连以及牢固而稳定的电气和机械线对板连接提供了低功率、密封解决方案。该小型化连接器适合较宽范围的引线。

APPLICATION (应用) LED advertisement /live events /wall wash /street lighting /spot /tunnel /flood /stripes lighting LED广告灯 /舞台灯 /洗墙灯 /路灯 /遂道灯 /泛光灯 /照明灯条等

SPECIFICATION (技术指标) Electrical 电气： Operating current 工作电流: 5 AMPS (18-20 AWG) & 3.5 AMPS (22-24 AWG) Operating voltage 工作电压: 250VAC / 250VDC Dielectric withstanding voltage 绝缘电压: 1500VAC Mechanical 机械：Operating temperature 工作温度: -40°C to +105°C Sealed To 水密等级: IP67 Materials 材料： Housing : UL 94V-0 high temperature resistant thermoplastic 塑壳 : UL 94V-0 耐高温热塑材料 Contact : Copper alloy, tin over nickel plating 触点 : 铜合金，镍底镀锡

SAFETY & REGULATIONS (安全和规范) UL 1977，CSA C22.2 No. 182.3 Product specification 产品规格: 108-2391 Application specification 应用规范: 114-13261

TE Connectivity — Circular Lighting Sealed Connector TE Connectivity — 经济型圆形防水连接器 PART NAME (产品) Circular Lighting Sealed Connector

SUPPLIER (供应商) 经济型圆形防水连接器

DESCRIPTION

描述

TE Connectivity's economic, low profile Circular lighting Sealed Connector (2P/3P/4P) are especially designed for LED power & signal wire-to-wire connection systems in a wide range of outdoor applications.

TE Connectivity小尺寸经济圆形防水连接器 (2位，3位，4位) 适用于LED 电源和信号的线到线连接系统，适合各类户外应用。

APPLICATION (应用) SSL outdoor applications: LED strips /spot /wall wash /billboards /tunnel /flood /street lighting LED户外照明：LED条形灯、聚光照明、洗墙景观照明、广告牌照明、隧道照明、泛光照明和街道照明等

SPECIFICATION (技术指标) Electrical 电气： Operating voltage 工作电压: 2P (250VAC /250VDC), 3P/4P (30VAC /30VDC) Operating current 工作电流: 7A Mechanical 机械：Housing : UL 94V-0 rated high temperature resistant thermoplastic 塑壳 : UL 94V-0 高温热塑材料 Contacts: Tin over nickel plating alloy 触点 : 铜合金，镍底镀锡 Sealed To 水密等级: IP67 Materials 材料： Operating temperature 允许温度: -55°C to +105°C

SAFETY & REGULATIONS (安全和规范) UL Recognized, file No. E321453 UL认证，文件编号E321453 Product specification 产品指标: 108-106022 Application specification 应用规范: 114-106022 Remarks: Nothing herein shall be understood as a guarantee for the products to be provided. 此间描述并非对产品所作之保证。

TE Connectivity — CoolSplice Connectors TE Connectivity — CoolSplice 连接器 PART NAME (产品) CoolSplice Connectors

SUPPLIER (供应商) CoolSplice连接器

DESCRIPTION

描述

The CoolSplice connectors are designed to connect a pair of discrete wires, or a twin cord cable in line to a pair of discrete wires or twin cord cables. The insulation displacement, free hanging connectors accepts 18 AWG stranded or solid wire in unsealed and sealed, color coded configurations. Factory or field terminations are completed with standard pliers.

CoolSplice连接器专为一对散线或双排线与另一对散线或双排线的电气连接，这个采用绝缘位移刺破连接模式的连接器可接受 18AWG多芯线或实芯线，有非防水和防水两种(蓝色标记)，工厂和现场应用时可用标准的钳子来完成连接。

APPLICATION (应用)

SAFETY & REGULATIONS (安全和规范)

Outdoor architectural lighting, commercial display cabinets lighting； Commercial refrigeration lighting；Residential and office furniture lighting etc. 室外建筑照明、商用展示厨柜照明、商用冰柜照明、家居和办公家具照明等

UL1977 and IEC 60998 CoolSplice connectors application specification: 114-19136 CoolSplice连接器应用说明: 114-19136 CoolSplice connectors product specification: 108-19419 CoolSplice连接器产品指标: 108-19419

SPECIFICATION (技术指标) Electrical 电气： Operating Voltage 工作电压: 230VAC / 250VDC；2.5A Operating Voltage 工作电压: 50VAC / 120VDC；5A Dielectric withstanding voltage 绝缘电压: 2000VAC Sealed 水密等级 IP65 , IP67 Accepts 18 AWG and [0.75mm2] solid or stranded wire 接受18AWG [0.75mm2] 实芯线或多芯线 Accepts 5.6mm [.220] to 7.4mm [.291] diameter cable 接受5.6mm [.220] to 7.4mm [.291] 直径线缆连接 Mechanical 机械：Operating temperature 工作温度: -40°C to +85°C Materials 材料： Contact : Tin plated copper alloy 端子: 铜合金，镀锡 UL 94V0 rated materials UL 94V0材料

TE Connectivity — Solderless LED Socket, Type CM TE Connectivity — 无焊接 LED 底座，CM 型 PART NAME (产品)

SUPPLIER (供应商)

Solderless LED Socket, Type CM 无焊接LED底座，CM型

DESCRIPTION

描述

TE Connectivity Solderless LED Socket, Type CM provides a solderless quick termination to the 1500 lumen output Cree XLamp® MP-L™ LED. This solderless termination technique facilitates easy integration of the LED into the end customer’s lighting fixtures with simple screw-down installation. Multiple versions are offered to provide application flexibility. To further enhance functionality to the fixture manufacturer, the socket also features integral, robust, snap attachment of LEDIL Tyra series reflector optics.

TE Connectivity的无焊接LED底座(CM型)专为CREE(可达1500流明)的 Xlamp® MP-L™提供进行快速无焊接端接。这种无焊接端接技术可容易地将功率多芯片集成光源LED，用简单的螺丝固定到照明灯具中，包括底座与PCB板连接版本和底座直接与线束(水平和垂直)连接版本，每种版本型号可以配带或不配带光学附件，应用灵活。可以同LEDIL Tyra系列反光罩快速无缝连接多种光角度可选。

APPLICATION (应用) Commercial and residential Lighting Fixtures /Integrated custom lighting 商用和家居照明灯具 /客户集成灯具

SPECIFICATION (技术指标) Electrical 电气： Solderless LED Socket (CM) operating current 工作电流: 500mA Solderless LED Socket (CM) operating voltage 工作电压: 30VDC Dielectric withstanding voltage 绝缘电压: 500VDC Mechanical 机械：Operating temperature 工作温度: -40°C to +105°C Materials 材料： UL 94 V0 rated high temp resist thermoplastic UL 94 V0 耐高温热塑材料 Contacts 触点: Base material copper alloy 端子铜合金 Silver plated interface to Cree Xlamp® MP-L™ LED 与Cree Xlamp® MP-L™ LED 端子镀银 Tin plated interface to AMP Mini CT or to PCB 与AMP Mini CT 或到印制板上的端子镀锡

SAFETY & REGULATIONS (安全和规范)

6 . 50 3X 3X

26 . 00

R15 . 30 3X

39 . 40 REF

UL Recognized Product specification 产品指标: 108-2439 Application specification 应用规范: 114-13281 43

Remarks: Nothing herein shall be understood as a guarantee for the products to be provided. 此间描述并非对产品所作之保证。

3 . 70

10 . 50

3 . 70

10 . 50

2106946-4

1 . 50 3X 2 . 90

About Arrow Asia

A business unit of Arrow Electronics., Inc. (NYSE: ARW), Arrow Asia Pac is one of Asia Pacificâ&#x20AC;&#x2122;s leading electronic component distributors. In addition to its regional headquarters in Hong Kong, Arrow Asia Pac operates 54 sales offices, four primary distribution centers and 14 local warehousing facilities in 13 countries/territories across Asia. Providing a full range of semiconductors, passive, electromechanical and connector products from over 200 leading international and local suppliers, Arrow Asia Pac serves more than 10,000 original equipment and contract manufacturers and commercial customers in Asia-Pacific. Visit us at www.arrowasia.com.

Asia Pacific Hong Kong sales.hongkong@arrowasia.com tel: (852) 2484 2484 fax: (852) 2484 2122

Hangzhou tel: (86) 571 8763 1324 (86) 571 8763 2465 fax: (86) 571 8763 2452

Australia sales.australia@arrowasia.com Head Office - Melbourne tel: (61) 3 9737 4900 fax: (61) 3 9737 4999

Nanjing tel: (86) 25 8470 2617 fax: (86) 25 8470 2665

Adelaide tel: (61 08) 8333 2122 fax: (61 08) 8333 2322 Brisbane tel: (61) 7 5575 7088 fax: (61) 7 3216 5750 Sydney tel: (61) 2 9868 9900 fax: (61) 2 9868 9901 China sales.china@arrowasia.com Head Office - Shanghai tel: (86) 21 2893 2000 fax: (86) 21 2893 2333 Beijing tel: (86) 10 8528 2030 fax: (86) 10 8528 2698 Chengdu tel: (86) 28 8620 3226 fax: (86) 28 8620 3223 Chongqing tel: (86) 23 6877 0466 fax: (86) 23 6877 0465 Fuzhou tel: (86) 591 8784 8456 (86) 591 8784 5282 fax: (86) 591 8784 5280 Guangzhou tel: (86) 20 3887 1735 (86) 20 3887 1736 (86) 20 3887 1737 fax: (86) 20 3887 1739

Ningbo tel: (86) 574 8764 1932 fax: (86) 574 8764 1933 Qingdao tel: (86) 532 5566 2799 fax: (86) 532 5566 2611 Shenyang tel: (86) 24 2334 1176 fax: (86) 24 2334 1073 Shenzhen tel: (86) 755 8836 7918 fax: (86) 755 8250 5200 Suzhou tel: (86) 512 6761 1929 fax: (86) 512 6761 7651 Tianjin tel: (86) 22 2320 1626 fax: (86) 22 2320 1625 Wuhan tel: (86) 27 5980 5281 fax: (86) 27 5980 5283 Xiamen tel: (86) 592 239 4567 (86) 592 239 4234 fax: (86) 592 239 4000 Xian tel: (86) 29 8834 4048 (86) 29 8765 1125 (86) 29 8765 1126 fax: (86) 29 8834 4148 Zhengzhou tel: (86) 371 6566 5757 fax: (86) 371 6566 5756 Zhuhai tel: (86) 756 337 3352 fax: (86) 756 337 3351

India sales.india@arrowasia.com Head Office - Bangalore tel: (91) 80 4135 3800 fax: (91) 80 4112 7784

Malaysia sales.malaysia@arrowasia.com Head Office - Penang tel: (60) 4 229 6613 fax: (60) 4 229 6623

Chennai tel: (91) 44 4235 9002 fax: (91) 44 2811 0358

Kuala Lumpur tel: (60) 3 7804 6313 fax: (60) 3 7804 6213

Cochin tel: (91) 95 6741 9262 fax: (91) 44 2811 0358

New Zealand sales.newzealand@arrowasia.com Head Office - Christchurch tel: (64) 3 366 2000 fax: (64) 3 366 2111

Hyderabad tel: (91) 40 6677 4146 fax: (91) 40 6677 4138 Kolkata tel: (91) 33 4003 4585 (91) 33 4003 4664 (91) 33 4006 8556 fax: (91) 33 2283 2402 Mumbai tel: (91) 22 4091 2400 fax: (91) 22 6692 1415 New Delhi tel: (91) 12 0453 5500 fax: (91) 12 0453 5505 Pune tel: (91) 20 4015 9006 fax: (91) 20 4015 9010 Indonesia sales.indonesia@arrowasia.com tel: (62) 21 2555 5652 fax: (62) 21 2555 5601 Japan sales.japan@arrowasia.com Head Office - Tokyo tel: (81) 3 3547 1861 fax: (81) 3 3547 1871 Korea sales.korea@arrowasia.com Head Office - Seoul tel: (82) 2 2650 9700 fax: (82) 2 2653 2700 Guro tel: (82) 2 2611 8400 fax: (82) 2 2611 8155 Seoul Excel Tech, Inc. tel: (82) 2335 7823 fax: (82) 2335 7825

Auckland tel: (64) 9 622 0101 fax: (64) 9 272 2310 Philippines sales.philippines@arrowasia.com tel: (632) 772 3053 fax: (632) 772 3054 Singapore sales.singapore@arrowasia.com tel: (65) 6559 8388 fax: (65) 6559 8288 Taiwan sales.taiwan@arrowasia.com Head Office - Taipei tel: (886) 2 7722 5168 fax: (886) 2 7723 8168 Hsinchu tel: (886) 3 620 1968 fax: (886) 3 620 2188 Kao Hsiung tel: (886) 7 553 0868 fax: (886) 7 552 9238 Thailand sales.thailand@arrowasia.com tel: (662) 694 2332 fax: (662) 694 2331 Chiang Mai tel: (662) 02 694 2332 Vietnam sales.vietnam@arrowasia.com tel: (84 8) 823 7850 fax: (84 8) 823 7840

Arrow Advantage advantage@arrowasia.com