EXPANSION JOINT SYSTEMS AND BUILDING PROFILES
CONTENTS 1. WHAT ARE EXPANSION JOINTS?
10
2. SEISMIC JOINTS.
12
3. WHAT DO YOU NEED TO KNOW TO CHOOSE THE RIGHT JOINT?
14
4. TABLE FOR JOINT SELECTION.
15
PRODUCT INDEX 5. FLUSH-MOUNTED JOINTS – WITH ELASTIC STRIPS
17
Novojunta Pro® Basic
18
Novojunta Pro® Aluminium
19
Novojunta Pro® Flush-mounted Perimeter
20
Novojunta Pro® L50
21
Novojunta Pro® L55
22
Novojunta Pro® L65
23
Novojunta Pro® L85
24
Novojunta Pro® XL105
25
Novojunta Pro® XL130
26
Novojunta Pro® WP80 Watertight
27
6. FLUSH-MOUNTED JOINTS – ALL METAL
29
Novojunta Pro® AL30 RS
30
Novojunta Pro® Mobile
31
Novojunta Pro® Metal 50
32
Novojunta Pro® Metal 60
33
Novojunta Pro® Metal 80
34
Novojunta Pro® Metal SIS110
35
Novojunta Pro® Metal 125
36
Novojunta Pro® Metal SIS
37
Novojunta Pro® Sismo SU
38
7. JOINTS OF SPECIAL WIDTHS 8. OVERLAID JOINTS
39 41
Novojunta Pro® AL30
42
Novojunta Pro® AL30 Perimeter
43
Novojunta Pro® Decor
44
Novojunta Pro® Basic SP
45
Novojunta Pro® Anti-slip
46
Novojunta Pro® Overlaid Perimeter
47
Novojunta Pro® SP
48
Novojunta Pro® Sismo PE
49
Novojunta Pro® Metal SP90
50
9. VERTICAL JOINTS
51
Novojunta Pro® AL30
52
Novojunta Pro® AL30 RS
53
Novojunta Pro® Decor
54
Novojunta Pro® Basic VT
55
Novojunta Pro® Basic VT SP
56
Novojunta Pro® Anti-slip
57
Novojunta Pro® Sismo PA
58
Novojunta Pro® PA
59
Novojunta Pro® PASP
60
10. WATERTIGHT MEMBRANE
61
11. FIRESTOP JOINTS
63 64 65
Firestop cord Firestop mastic
12. RETRACTION JOINTS IN CONCRETE FLOORS AND MORTAR SCREEDS
67
Novojunta速 Hormigonado
68
Novojunta Pro速 Hormigonado
69
13. JOINT COVERS
71
Novotapajuntas NDP
72
Novotapajuntas NDA
73
Novotapajuntas NDAS
74
Novotapajuntas NCJE
74
Novotapajuntas GTA
75
Novotapajuntas TX
76
Novotapajuntas GTX
76
Novosepara 10
77
14. EXPANSION AND FRACTIONING JOINTS FOR PAVING
79
Novojunta® Metallic
80
Novojunta® Metallic Perimeter
81
Novojunta Decor®
82
Novojunta Decor® XL
83
Novojunta Metallic® Flecha
84
Novojunta® JSI
84
Novojunta Decor® Flecha
85
Novojunta® 1 Pvc
86
Novojunta® 3 Pvc
87
15. PROFILES AND ACCESSORIES
89
Novocanto® Stainless Steel
90
Novocanto速 Aluminium
90
Novocanto速 Pvc
91
Novoyeso
91
Monocapa
92
Novopared-Novosuelo
92
Novolistel速 Basic Stainless Steel
93
Novolistel速 3 Aluminium
93
Novoescuadra Aluminium
94
Novoescuadra Plus
94
Novosepara 1
95
Novosepara 6
95
Novosepara 9
96
Novopletina Aluminium
96
Novoescocia® 4 Aluminium
97
Novoescocia® 4 Pvc
97
16. SKIRTING
99
Novorodapie® Rehabit
100
Novorodapie® L
100
Novorodapie® Flex
101
Novorodapie® SemiFlex
101
17. STEP FINISHES
103
Novopeldaño® 5
104
Novopeldaño® Safety
104
Novopeldaño® Lúmina
105
18. MATS 19. OTHER EXCLUSIVE SOLUTIONS
107 111
1. WHAT ARE EXPANSION JOINTS? In construction everything moves. All buildings and their structural elements are subject to pressures that cause movements, deformations and geometrical changes.
THESE PRESSURES STEM FROM THE FOLLOWING CAUSES: • Variations in temperature of the environment. • Expansions generated from the contraction of the different construction materials. • Settlement and movement of the terrain • Seismic movement • The weight of the buildings themselves and their use. • Wind pressure. • Loads and traffic. With the aim of controlling and preventing these internal tensions, medium-sized and large buildings are built in blocks, so that each of these blocks operates independently and does not knock against the block next to it. Between these blocks, spaces are reserved for the expansion joints. The placement and opening of these joints are determined by the estimator or structural engineers, who will also determine the load capacity that the joint must bear. An expansion joint is an opening that pierces the entire construction: floors, walls, façades and roofs. The structural expansion joints absorb and accompany the buildings’ movements to control and prevent cracking. They also enable isolation of the joins between different structural elements, including walls, machinery foundations, drains and so on, avoiding the transmission of tensions between them. Doing away with expansion joints, using an unsuitable joint system or distributing joints incorrectly can encourage the appearance of all kinds of pathology in the building’s structure and finishes which, once works are terminated, will be difficult to solve and mean high maintenance costs. In contrast, correctly resolving the most critical joins and flashing on a site is the mark of a good project. Expansion joint profiles are applied in airports, shopping centres, hospitals, schools, parking facilities, industrial buildings and factories. They consist of metal profiles (aluminium, steel, stainless steel, etc.), generally joined by rubber inserts, and covering the openings to allow movement in the blocks without causing damage to the cement or cladding.
10
NOVOJUNTA PRO® EXPANSION JOINTS CAN BE CLASSIFIED INTO THE FOLLOWING CATEGORIES ACCORDING TO INSTALLATION: • Overlaid, on the floor. • Flush, built-in flush with the floor. ACCORDING TO THE LOAD THEY SUPPORT: • Light • Medium • Heavy • Very heavy ACCORDING TO PURPOSE: • Floor-floor • Wall-wall • Floor-wall
The Novojunta Pro® series by Emac® enables expansion joints to act without interfering with structural movements. This is a complete range of profile systems conceived to absorb the different movement types and avoid the appearance of cracks and other pathologies, thereby extending the useful life of structures. They can be installed with all types of material: porcelain, concrete, terrazo, granite, marble and other stone. Furthermore, they can be complemented with watertight bands to avoid leaks, dampness and dirt, as well as using firestop systems that stop the passage of fire and smoke. All the trials we carry out, we do so in independent technological institutes belonging to the redIT of the Valencian Community. According to their movement capacity, expansion joints are divided into”thermal” and”seismic”. Thermal joints: are those that admit the expansion of the construction elements themselves. Habitually these joints do not surpass 50 mm (1.97”) joint widths and expansions of +/- 10 mm (0.39”) Seismic joints: as a general rule, seismic joints are classed as those that have a multi-directional expansion capacity of at least 25% of the width of the joint in each horizontal direction. For example, in the case of a joint 50 mm (1.97”) wide, in order to class it as a joint with seismic capacity, it must have an expansion of at least +/- 12.5 mm (0.49”). Furthermore, these joints must have enough resistance not to deform with the traffic borne and also span the distance between blocks with enough rigidity. It is advisable to install joints that are all metal.
11
2. SEISMIC JOINTS Seismic danger or the destructive potential of earthquakes is determined by four conditions according to Bertero (1992):
CONDITIONS THAT DETERMINE THE DESTRUCTIVE POTENTIAL OF EARTHQUAKES • Earthquake severity, its magnitude. The movement induced in the terrain which will affect the constructions. • The seismic source and its distance. • The size, distribution and economic development of the towns affected. • Preparation against the earthquake, understood as the population’s degree of response and the prevention measures that are taken against the chance of an earthquake.
GLOBAL SEISMIC HAZARD MAP
produced by the Global Seismic Hazard Assessment Program (GSHAP) Por D. Giardini. G. Grünthal. K. Shedlock. and P.Zhang 1999
u 12
Against the phenomenon of earthquakes, construction plays a fundamental role to guarantee the safety and stability of buildings. This is especially important in those which are necessary for the population’s survival, such as hospitals, fire stations, etc. Countries such as Japan, the USA or Chile have developed highly demanding standards so that buildings overcome seismic activity without failure or collapse.
CLASSIFICATION OF CONSTRUCTIONS
At a European level, we find references to seismic aspects in the Eurocode 8: Design of structures for earthquake resistance, which indicates requirements such as uniformity and symmetry for constructions, to improve their response to seismic activity. So a cubic design of buildings is recommended, without irregular geometries, and uniformity can be achieved by subdividing the building using seismic joints.
• Constructions of special importance: buildings whose destruction could cause a large number of victims or interrupt an essential service.
We can classify constructions according to their importance into three types:
• Constructions of moderate importance: those buildings whose destruction by an earthquake would have little probability of causing victims. • Constructions of normal importance: buildings whose destruction could cause victims, but which is not a building containing essential services in the event of a catastrophe.
The last group includes hospitals, communications buildings (radio, television, telecommunications centres), buildings for organisation and coordination, buildings for rescue personnel and equipment (fire fighters, police, armed forces, machinery and ambulance parks), basic utilities (water tanks, gas, fuels, pump centres, electrical power plants), airports, public performance buildings, large shopping centres and special constructions such as nuclear power plants, dams and places where dangerous substances are stored. Each construction must be separated from its adjacent buildings by a minimum distance to mitigate the shock effects during seismic movements. These required minimum separation values are established. The joints between the bodies of buildings must have at least a width corresponding to the sum of the maximum lateral displacements of the two bodies. The joints must be situated at a maximum distance of 40 m (43 yd).
13
3. WHAT DO YOU NEED TO KNOW TO CHOOSE THE RIGHT JOINT? FUNDAMENTAL QUESTIONS THAT SHOULD BE ASKED 1. What width does the joint opening have? 2. What is the calculated movement that the structure will have? • Horizontal movement
• Vertical movement
3. What type of flooring will be installed? 4. What type of fixture does it need? • Flush
• Overlaid (previously installed cladding)
5. What thickness does the cladding (h) have? (for flush-mounted joints) 6. Required load capacity. What mode of transport will pass over it?.
7. Will the joint be in the exterior or the interior of the building?. 8. Does it need to be watertight (for example underground car parks)? 9. Any possible presence of chemical agents?
! 14
EVALUATION AND TECHNICAL STUDY WITH NO OBLIGATION OUR TECHNICAL TEAM IS FULLY AT YOUR SERVICE TO RESOLVE YOUR DOUBTS OR PROVIDE THE TECHNICAL INFORMATION YOU NEED: TECHNICAL FILES, TRIAL CERTIFICATES, CAD DRAWINGS, BC3 FILES, INSTALLATION INSTRUCTIONS AND SO ON. IF YOU PREFER, WE WILL PROVIDE YOU WITH THE PLANS AND MAKE THE CALCULATION AND DISTRIBUTION OF THE JOINTS NEEDED FOR YOUR PROJECT.
4. TABLE FOR JOINT SELECTION JOINT TYPE
INSTALLATION
LOAD-USE
Light/Medium
Medium
Medium/Heavy
REFERENCE
MAXIMUM JOINT WIDTH
TYPE
PAGE
Novojunta Pro® AL30 RS
30 mm (1.18”)
All Metal
30
Novojunta Pro® Basic
40 mm (1.57”)
With elastic strip
18
Novojunta Pro® XL130
130 mm (5.12”)
With elastic strip
26
Novojunta Pro® Aluminium
55 mm (2.16”)
With elastic strip
19
Novojunta Pro® L50
50 mm (1.97”)
With elastic strip
21
Novojunta Pro® L55
55 mm (2.16”)
With elastic strip
22
Novojunta Pro® L65
65 mm (2.56”)
With elastic strip
23
Novojunta Pro® L85
85 mm (3.35”)
With elastic strip
24
Novojunta Pro® XL105
105 mm (4.13”)
With elastic strip
25
Novojunta Pro® Metal SIS110
110 mm (4.33”)
All Metal. Seismic
35
Novojunta Pro® WP80
80 mm (3.15”)
Watertight
27
Novojunta Pro® Mobile
50 mm (1.97”)
All Metal
31
Novojunta Pro® Metal 50
50 mm (1.97”)
All Metal
32
Novojunta Pro® Metal 60
60 mm (2.36”)
All Metal
33
Novojunta Pro® Metal 80
80 mm (3.15”)
All Metal
34
Novojunta Pro® Sismo SU
100 mm (3.94”)
All Metal. Seismic
38
Novojunta Pro® Metal 125
125 mm (4.92”)
All Metal. Seismic
36
Novojunta Pro® Metal SIS
200 mm (7.87”)
All Metal. Seismic
37
Novojunta Pro® Decor
30 mm (1.18”)
Metal+rubber
44
Novojunta Pro® AL30
30 mm (1.18”)
All Metal
42
Novojunta Pro® Basic SP
40 mm (1.57”)
With elastic strip
45
Novojunta Pro® Anti-slip
44 mm (1.73”)
With elastic strip
46
Novojunta Pro® SP
50 mm (1.97”)
With elastic strip
48
Novojunta Pro® SP90
90 mm (3.54”)
With elastic strip. Seismic
50
Novojunta Pro® Flush-mounted perimeter
42 mm (1.65”)
With elastic strip
20
Novojunta Pro® AL30 Perimeter
32 mm (1.26”)
All Metal
43
Novojunta Pro® Overlaid perimeter
44 mm (1.73”)
With elastic strip
47
Novojunta Pro® Sismo PE
74 mm (2.91”)
All Metal. Seismic
49
Novojunta Pro® AL30 RS
30 mm (1.18”)
All Metal
53
Novojunta Pro® Basic VT
40 mm (1.57”)
With elastic strip
55
Novojunta Pro® PA
330 mm (12.99”)
With elastic strip. Seismic
59
Novojunta Pro AL30
30 mm (1.18”)
All Metal
52
Novojunta Pro® Decor
30 mm (1.18”)
Metal+rubber
54
Novojunta Pro® Basic VT SP
40 mm (1.57”)
With elastic strip
56
Novojunta Pro® Anti-slip
44 mm (1.73”)
With elastic strip
57
Novojunta Pro® Sismo PA
100 mm (3.94”)
All Metal. Seismic
58
Novojunta Pro® PASP
360 mm (14.17”)
With elastic strip. Seismic
60
Flush-mounted Heavy
Floor/Floor
Very heavy
Light Light/Medium Overlaid Medium Medium/Heavy Flush-mounted
-
Floor/Wall Overlaid
Flush-mounted.
-
-
®
Wall/Wall Overlaid
-
15
PRODUCT
16
5. FLUSH-MOUNTED JOINTS WITH ELASTIC STRIPS
u 17
Floor/Floor Light/medium load Flush-mounted
NovoJunta Pro BASIC ®
OCCASIONAL USE
• Expansion joints for flooring (concrete, terrazo, stone, etc.). • For joint widths up to 45 mm (1.77”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts. • 5 profile heights available: 12.5, 22, 40, 50 and 80 mm (0.49”, 0.87”, 1.57”, 1.97” and 3.15”). • 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface. • All the profiles and rubber parts in the series can be combined, ordered separately and not as an assembly. • They can be installed between pavings of different heights/ thicknesses, combining aluminium attachment flanges with different heights (h) to each side of the joint.
Materials and technical details
Load capacity
Rubber colours
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasional heavy load traffic. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Black 9005
Grey 7035
• Aluminium L-shaped profiles, perforated on their base to receive the fastenings. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Beige 1013
SMOOTH GROOVED
REFERENCE
JOINT WIDTH (a)
JOINTS UP TO 25 mm WIDE NJPB2012* NJPB2022* NJPB2040* 20 mm (0.79”) NJPB2050* NJPB2080* JOINTS UP TO 35 mm WIDE NJPB3012* NJPB3022* NJPB3040* 30 mm (1.18”) NJPB3050* NJPB3080* JOINTS UP TO 45 mm WIDE NJPB4012* NJPB4022* NJPB4040* 40 mm (1.57”) NJPB4050* NJPB4080*
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Smooth rubber
EXPANSION Grooved rubber
24 mm (0.94”)
104 mm (4.09”) 104 mm (4.09”) 120 mm (4.72”) 160 mm (6.3”) 130 mm (5.12”)
12.5 mm (0.49”) 22 mm (0.87”) 40 mm (1.57”) 50 mm (1.97”) 80 mm (3.15”)
smooth or grooved
8 mm (+4/-4) 0.31” (+0.15/-0.15)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
34 mm (1.34”)
114 mm (4.49”) 114 mm (4.49”) 130 mm (5.12”) 170 mm (6.69”) 140 mm (5.51”)
12.5 mm (0.49”) 22 mm (0.87”) 40 mm (1.57”) 50 mm (1.97”) 80 mm (3.15”)
smooth or grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
12 mm (+6/-6) 0.47” (+0.23/-0.23)
44 mm (1.73”)
124 mm (4.88”) 124 mm (4.88”) 140 mm (5.51”) 180 mm (7.09”) 150 mm (5.90”)
12.5 mm (0.49”) 22 mm (0.87”) 40 mm (1.57”) 50 mm (1.97”) 80 mm (3.15”)
smooth or grooved
12 mm (+6/-6) 0.47” (+0.23/-0.23)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
*Indicate rubber colour and type (smooth or grooved). EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
18
www.emac.es
OCCASIONAL USE
Floor-floor Medium load Flush-mounted
COLOCACIÓN NovoJunta Pro® ALUMINIUM Model registered as Community design No 869892-5
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 55 mm. (2.17”) • Admission of movement up to 20 mm. (0.79”) • Replaceable rubber. • Safe and easy attachment thanks to the perforated profiles.
Materials and technical details • Natural aluminium profiles, perforated on their base to receive the fastenings. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Shims are available to facilitate alignment between profiles in the installation. • They can be installed between pavings of different heights/ thicknesses, combining aluminium attachment flanges with different heights (h). • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours
Black 9005
Novojunta Pro® Aluminium h:20 mm.
Novojunta Pro® Aluminium h:35 mm y h:50 mm c b
c b
h
h
a
REFERENCE
JOINT WIDTH (a)
a
VISIBLE WIDTH (b)
JOINTS UP TO 30 mm WIDE NJPAL2034 NJPAL3534* 30 mm (1.18”) 34 mm (1.34”) NJPAL5034* JOINTS UP TO 40 mm WIDE NJPAL2044 NJPAL3544* 40 mm (1.57”) 44 mm (1.73”) NJPAL5044* JOINTS UP TO 55 mm WIDE NJPAL3559* 55 mm (2.17”) 59 mm (2.32”) NJPAL5059* * By adding a central reinforcement piece, it bears medium loads.
www.emac.es
TOTAL WIDTH (c)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Horizontal
87 mm (3.42”) 130 mm (5.12”) 130 mm (5.12”)
20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)
grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
97 mm (3.82”) 140 mm (5.51”) 140 mm (5.51”)
20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)
grooved
14 mm (+7/-7) 0.55” (+0.27/-0.27)
155 mm (6.10”) 155 mm (6.10”)
35 mm (1.38”) 50 mm (1.97”)
grooved
20 mm (+10/-10) 0.79” (+0.39/-0.39)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
19
NOVOJUNTA PRO® FLUSH-MOUNTED PERIMETER Model registered as Community design No 869888-1
Floor-wall Flush-mounted
• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.). It is the perfect complement to the Novojunta Pro@ Aluminium. • For joint widths up to 42 mm (1.65”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber. • Safe and easy attachment thanks to the perforated profiles.
Materials and technical details • Natural aluminium profiles, perforated on their base to receive the fastenings. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Rubber colours
Black 9005
Novojunta Pro® flush-mounted perimeter
b h a
REFERENCE JOINTS UP TO 34 mm WIDE NJPPS2032 NJPPS3532 NJPPS5032 JOINTS UP TO 50 mm WIDE NJPPS2042 NJPPS3542 NJPPS5042
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Horizontal
32 mm (1.26”)
32 mm (1.26”)
20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)
grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
42 mm (1.65”)
42 mm (1.65”)
20 mm (0.79”) 35 mm (1.38”) 50 mm (1.97”)
grooved
14 mm (+7/-7) 0.55” (+0.27/-0.27)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
20
www.emac.es
OCCASIONAL USE
Floor-floor Medium-heavy load Flush-mounted
NOVOJUNTA COLOCACIÓN PRO® L50
• Expansion joints for flooring (concrete, terrazo, stone, etc.). • For joint widths up to 50 mm (1.97”). • Admission of movement up to 20 mm (0.79”). Replaceable rubber. Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Aluminium L-shaped profiles, perforated on their base to receive the fastenings. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours Black 9005
Novojunta Pro® L50
Grey 7035
c b
h a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Smooth rubber
EXPANSION Grooved rubber
NJPL50AL35NA NJPL50AL50NA NJPL50AL80NA
50 mm (1.97”)
55 mm (2.17”)
155 mm (6.10”)
35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
smooth or grooved
16 mm (+8/-8) 0.63” (+0.31/-0.31)
20 mm (+10/-10) 0.79” (+0.39/-0.39)
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
21
Floor-floor Medium-Heavy load Flush-mounted
NOVOJUNTA PRO® L55
OCCASIONAL USE
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 55 mm. (2.16”) • Admission of movement up to 26 mm. (1.02”) • Replaceable rubber. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece joints that act as support for te rubber and allow vertical movement. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours
Black 9005
Grey 7035
Novojunta Pro® L55
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
NJPL55AL18NA NJPL55AL35NA NJPL55AL50NA NJPL55AL80NA
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION horizontal
EXPANSION vertical
grooved
26 mm (+13/-13) 1.02” (+0.5/-0.5)
12 mm (+6/-6) 0.47” (+0.23/-0.23)
18 mm (0.71”) 55 mm (2.16”)
80 mm (3.15”)
195 mm (7.68”)
35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
22
www.emac.es
OCCASIONAL USE
Floor-floor Medium-heavy load Flush-mounted
NOVOJUNTA COLOCACIÓN PRO® L65
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 65 mm (2.59”). • Admission of movement up to 28 mm (1.1”). • Replaceable rubber. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled with two solid pieces and a central reinforcement piece that supports the rubber. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours
Black 9005
Grey 7035
c b
Novojunta Pro® L65
h
a
REFERENCE NJPL65AL35NA NJPL65AL50NA
www.emac.es
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
65 mm (2.59”)
83 mm (3.27”)
205 mm (8.07”)
PROFILE HEIGHT (h) 35 mm (1.38”) 50 mm (1.97”)
RUBBER TYPE
EXPANSION horizontal
EXPANSION vertical
grooved
28 mm (+18/-10) 1.1” (+0.7/-0.4)
20 mm (+10/-10) 0.79” (+0.39/-0.39)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
23
Floor-floor Medium-heavy load Flush-mounted
NOVOJUNTA PRO L85 ®
OCCASIONAL USE
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 85 mm (3.35”). • Admission of movement up to 22 mm (0.86”). • Replaceable rubber 2x40 mm (2x1.57”) wide. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece aluminium joints that allow vertical movement of the joint. The side pieces support a large reinforcement piece that improves the joint’s load capacity and houses the double synthetic rubber pieces of which it consists. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours Black 9005
Grey 7035
c
Novojunta Pro® L85
b
h a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
85 mm (3.35”)
111 mm (4.37”)
226 mm (8.9”)
NJPL85AL35NA NJPL85AL50NA NJPL85AL80NA
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Horizontal
EXPANSION Vertical
grooved
22 mm (+11/-11) 0.86” (+0.43/-0.43)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
24
www.emac.es
OCCASIONAL USE
COLOCACIÓN ® NOVOJUNTA PRO XL105
Floor-floor Medium-heavy load Flush-mounted
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 105 mm (4.13”) • Admission of movement up to 26 mm (1.02”). • Replaceable rubber 2x50 mm (2x1.97”) wide. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Reinforced aluminium L-shaped profiles, perforated on their base to receive fastenings, assembled using a system of two-piece aluminium joints that allow vertical movement of the joint. The side pieces support a large reinforcement piece that improves the joint’s load capacity and houses the double synthetic rubber pieces of which it consists. • Double insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 35 kN, and occasionally up to 300 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours Black 9005
Grey 7035
c b
Novojunta Pro® XL105
h a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
NJPXL105AL35 NJPXL105AL50 NJPXL105AL80
www.emac.es
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION horizontal
EXPANSION vertical
grooved
26 mm (+13/-13) 1.02” (+0.51/-0.51)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
35 mm (1.38”) 105 mm (4.13”)
130 mm (5.12”)
236 mm (9.29”)
50 mm (1.97”) 80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it Emac AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
25
Floor-floor Light-medium load Flush-mounted
NOVOJUNTA PRO XL130 ®
• Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 130 mm (5.11”). • Admission of movement up to 40 mm (1.57”). • Replaceable rubber 3x45 mm (3x1.77”) wide. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Aluminium L-shaped profiles, perforated on their base to receive the fastenings and central reinforcement. • Triple insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • It is supplied pre-assembled. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours Black 9005
Grey 7035
c b
Novojunta Pro® XL130
h
a
REFERENCE NJPXL130AL35 NJPXL130AL50
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
130 mm (5.12”)
155 mm (6.10”)
274 mm (10.79”)
PROFILE HEIGHT (h) 35 mm (1.38”) 50 mm (1.97”)
RUBBER TYPE
EXPANSION horizontal
EXPANSION vertical
grooved
40 mm (+20/-20) 1.57” (+0.78/-0.78)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
26
www.emac.es
Floor-floor Heavy load Flush-mounted ES TA N CA
• Watertight joint. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • For joint widths up to 80 mm (3.15”). • Admission of movement up to 60 mm (2.36”). • Capacity to support heavy loads. • Ideal for hygienic zones.
NOVOJUNTA PRO® WP80
Materials and technical details • Structure manufactured of solid steel. • Anti-vibration rubber. • Elastic insert of EPDM rubber with a second additional WOLFIN IB waterproofing membrane. • Special interchangeable thermoplastic membranes compatible with bituminous sheets or PVC membranes. • Covered with stainless steel profiles AISI 304 of 2-mm thickness. • Resistant to atmospheric agents and changes in temperature from -35ºC to +120ºC. • It is supplied pre-assembled. • Installed using metal No. 7 plugs spaced every 30 cm (11.8”). • The complete kit includes all fastenings. • We recommend attaching in a staggered fashion. • Optional: firestop cord.
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. Important note: this joint requires technical assessment for installation. The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours Black 9005
Novojunta Pro® WP80
c b h
a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
80 mm (3.15”)
135 mm (5.31”)
275 mm (10.82”)
NJPWP80AL54N NJPWP80AL64N NJPWP80AL94N
www.emac.es
PROFILE HEIGHT (h) 54 mm (2.12”) 64 mm (2.52”) 94 mm (3.7”)
EXPANSION horizontal
EXPANSION vertical
60 mm (+30/-30) 2.36” (+0.18/-0.18)
30 mm (+15/-15) 1.18” (+0.59/-0.59)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
27
28
6. FLUSH-MOUNTED JOINTS – ALL METAL
u 29
Floor-floor Light-medium load Flush-mounted
NOVOJUNTA PRO AL30 RS ®
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, stone, etc.). • For joint widths up to 30 mm (1.18”). • Admission of movement up to 9.4 mm.
Materials and technical details • Joint formed of aluminium profiles. • System with the capacity to absorb multidirectional movements • Profiles supplied in standard lengths of 2.5 m (98.4”). • It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
Anodised matt silver
c b
Novojunta Pro® AL30 RS
h a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
NJPAL30RSPL
30 mm (1.18”)
32.5 mm (1.279”)
84 mm (3.3”)
12.5 mm (0.49”)
9.4 mm (+4.7/-4.7) 0.37” (+0.18/-0.18)
5 mm (+2.5/-2.5) 0.19” (+0.1/+0.1)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
30
www.emac.es
Floor-floor Very heavy load Flush-mounted
® NOVOJUNTA PROCOLOCACIÓN MOBILE Model registered as Community design No 869889-2
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • Grooved, anti-slip surface • For joint widths up to 50 mm (1.97”). • Admission of movement up to 10 mm (0.39”).
Materials and technical details • Aluminium profiles, perforated on their base to receive the fastenings. • System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 2.5 m (98.4”). • It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
Natural
Anodised matt silver
Novojunta Pro® Mobile
REFERENCE NJPMAL2071 NJPMAL2071PL NJPMAL3571 NJPMAL3571PL NJPMAL5071 NJPMAL5071PL NJPMAL7071 NJPMAL7071PL
www.emac.es
FINISH
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
Natural Natural Natural Anodised matt silver Natural Anodised matt silver
EXPANSION horizontal
20 mm (0.79”)
Anodised matt silver Anodised matt silver
PROFILE HEIGHT (h)
35 mm (1.38”) 50 mm (1.97”)
71 mm (2.79”)
154 mm (6.06”) 50 mm (1.97”)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
70 mm (2.75”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
31
Floor-floor Very heavy load Flush-mounted
NOVOJUNTA PRO METAL 50 ®
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • It bears the weight of large loads (trucks, forklifts and pallet trucks). • Grooved, anti-slip surface • For joint widths up to 50 mm (1.97”). • Admission of movement up to 20 mm (0.79”). • Ideal for warehouses, airports, shopping centres, parking facilities, etc.
Materials and technical details Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.
Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
• Aluminium profiles, perforated on their base to receive the fastenings. • System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 3 m (98.4”). • It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face. • Installation using metal expansion bolts spaced every 30 cm (11.8”). • The complete kit includes all fastenings. • We recommend attaching in a staggered fashion. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Natural
Novojunta Pro® Metal 50
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
NJPM50AL18NA NJPM50AL35NA NJPM50AL50NA NJPM50AL80NA
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
20 mm (+10/-10) 0.79” (+0.39/-0.39)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
18 mm (0.71”) 50 mm (1.97”)
75 mm (2.95”)
190 mm (7.48”)
35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
32
www.emac.es
Floor-floor Very heavy load Flush-mounted
NOVOJUNTA PRO® COLOCACIÓN METAL 60
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • It bears the weight of large loads (trucks, forklifts and pallet trucks). • Grooved, anti-slip surface • Visible surface without holes to avoid the accumulation of dirt and noise. • For joint widths up to 60 mm (2.36”). • Admission of movement up to 30 mm (1.18”).
Materials and technical details • Aluminium profiles, perforated on their base to receive the fastenings. • System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 3 m (98.4”). • It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face. • Installation using metal expansion bolts spaced every 30 cm (11.8”). • The complete kit includes all fastenings. • We recommend attaching in a staggered fashion. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.
Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available Natural
Novojunta Pro® Metal 60
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
NJPM60AL18NA NJPM60AL35NA NJPM60AL50N3 NJPM60AL80NA
www.emac.es
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
30 mm (+15/-15) 1.18”(+0.59/-0.59)
12 mm (+6/-6) 0.47”(+0.23/-0.23)
18 mm (0.71”) 60 mm (2.36”)
80 mm (3.15”)
195 mm (7.68”)
35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
33
Floor-floor Very heavy load Flush-mounted
NOVOJUNTA PRO® METAL80
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • It bears the weight of large loads (trucks, forklifts and pallet trucks). • Grooved, anti-slip surface • Visible surface without holes to avoid the accumulation of dirt and noise. • For joint widths up to 80 mm (3.15”). • Admission of movement up to 40 mm (1.57”).
Materials and technical details Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 6,5 kg/mm.
Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
• Aluminium profiles, perforated on their base to receive the fastenings. • System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 3 m (98.4”). • It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face. • Installation using metal expansion bolts spaced every 30 cm (11.8”). • The complete kit includes all fastenings. • We recommend attaching in a staggered fashion. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Natural
c b
Novojunta Pro® Metal 80
h a
REFERENCE NJPM80AL50N3 NJPM80AL80NA
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
80 mm (3.15”)
110 mm (4.33”)
250 mm (9.84”)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
50 mm (1.97”)
440 mm (+20/-20) 1.57” (+0.78/-0.78)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
34
www.emac.es
COLOCACIÓN NOVOJUNTA PRO® METAL SIS110
Floor-floor Heavy load Flush-mounted SE IS M IC
• Great expansion. Ideal for areas of seismic risk. • Admission of movement up to 40 mm (1.57”). • For joint widths up to 110 mm (4.33”). • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • It bears the weight of large loads (trucks). • Grooved, anti-slip surface.
Materials and technical details • Aluminium profiles, perforated on their base to receive the fastenings. • System with the capacity to absorb large multidirectional movements. • Profiles supplied in standard lengths of 3 m (118.1”). • It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face. • Attachment to the floor structure or floor slab using metal expansion bolts. • The complete kit includes all fastenings. • We recommend attaching in a staggered fashion. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 200 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
Natural
Novojunta Pro® Metal SIS110
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
NJPM110S18NA NJPM110S35NA NJPM110S50NA NJPM110S80NA
www.emac.es
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
40 mm (+20/-20) 1.57” (+0.78/-0.78)
20 mm (+10/-10) 0.79” (+0.39/-0.39)
18 mm (0.71”) 110 mm (4.33”)
130 mm (5.12”)
250 mm (9.84”)
35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
35
Floor-floor Very heavy load Flush-mounted
SE IS M IC
NOVOJUNTA PRO® METAL 125
• Great expansion. Ideal for areas of seismic risk. • Admission of movement up to 60 mm (2.36”). • For joint widths up to 125 mm (4.92”). • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • It bears the weight of large loads (trucks, forklifts and pallet trucks). • Grooved, anti-slip surface
Materials and technical details Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 300 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 7 kg/mm.
Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
Natural
• Aluminium profiles, perforated on their base to receive the fastenings. • System with the capacity to absorb large multidirectional movements • Profiles supplied in standard lengths of 3 m (118.1”). • It is supplied pre-assembled with strips that must be removed once installed, and with protective film on the visible face. • Attachment to the floor structure or floor slab using metal expansion bolts. • A full metre includes all fastenings. • We recommend attaching in a staggered fashion. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Novojunta Pro® Metal 125
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
125 mm (4.92”)
140 mm (5.51”)
260 mm (10.23”)
NJPM125AL35N NJPM125AL50N NJPM125AL80N
PROFILE HEIGHT (h) 35 mm (1.38”) 50 mm (1.97”) 80 mm (3.15”)
EXPANSION horizontal
EXPANSION vertical
60 mm (+30/-30) 2.36” (+1.18/-1.18)
20 mm (+10/-10) 0.79” (+0.39/-0.39)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
36
www.emac.es
NOVOJUNTA PRO®COLOCACIÓN METAL SIS
• Great expansion. Ideal for areas of seismic risk. • Admission of movement up to 60 mm (2.36”). • For joint widths up to 200 mm (7.87”). • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • It bears the weight of large loads (trucks, forklifts and pallet trucks). • Grooved, anti-slip surface • Visible surface without holes to avoid the accumulation of dirt and noise.
SE IS M IC
Floor-floor Very heavy load Flush-mounted
Materials and technical details • Joint formed of slippery aluminium profiles. Movement is ensured by a double hinge sliding along retractable guides thanks to which the transit surface remains flat and stepless. • System with the capacity to absorb large multi-directional movements • Profiles supplied in standard lengths of 3 m (118.1”). • It is supplied pre-assembled with protective film on the visible face. • Installed using metal plugs spaced every 30 cm (11.8”). • A full metre includes all fastenings. • Attachment of the system 6 cm (2.36”) from the border of the joint has been studied to preserve the adjacent paving. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 600 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 30 kN with contact pressure of 1 N/mm2. • Vulkollan wheel of 30 kN with contact pressure of 6 N/mm2. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available Natural
Novojunta Pro® Metal SIS b
a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
NJPMSIS50NA
50 mm (1.97”)
255 mm (10.03”)
NJPMSIS100NA
100 mm (3.94”)
305 mm (12”)
NJPMSIS150NA
150 mm (5.9”)
360 mm (14.17”)
NJPMSIS200NA
200 mm (7.87”)
410 mm (16.14”)
www.emac.es
PROFILE HEIGHT (h)
EXPANSION Horizontal
EXPANSION Vertical
20 mm (0.79”)
60 mm (+30/-30) 2.36” (+1.18/-1.18)
50 mm (+25/-25) 1.97” (+0.98/-0.98)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
37
NOVOJUNTA PRO SISMO SU Patent pending ®
Floor-floor Very heavy load Flush-mounted
SE IS M IC
• Great expansion. Ideal for areas of seismic risk. • Admission of movement up to 130 mm (5.11”). • For joint widths up to 100 mm (3.94”). • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • Grooved, anti-slip surface.
Materials and technical details
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 600 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 70 kN. • Platform lifts and pallet trucks with solid wheels up to 7 kg/mm. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
Anodised matt silver
• Joint formed of slippery aluminium profiles in anodised matt silver. • System with the capacity to absorb large multidirectional movements • Profiles supplied in standard lengths of 2.5 m (98.4”). • It is supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord, and watertight membrane (only some references. Ask Us).
See our explanatory video by capturing this QR code on your smartphone or going to our corporate channel on YouTube (http://www.youtube.com/user/ emaccomplementos).
Novojunta Pro® SISMO SU
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
NJPSUALPL25
100 mm (3.94”)
367.7 mm (14.48”)
21.6 mm (0.85”)
130 mm (+65/-65) 5.11” (+2.55/-2.55)
12 mm (+6/-6) 0.47” (+0.23/-0.23)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
38
www.emac.es
7. JOINTS OF SPECIAL WIDTHS
u 39
JOINTS OF SPECIAL COLOCACIÓN WIDTHS
!
www.emac.es
40
We offer specific solutions for joints of large dimensions, up to 400 mm (15.75”) wide. Request more information from our Technical Department.
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
8. OVERLAID JOINTS
u 41
® NOVOJUNTA PRO AL30 Model registered as Community design No 1815762-0001
Floor-floor Light-medium load Overlaid • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • Grooved, anti-slip surface. • For joint widths up to 30 mm (1.18”). • Admission of movement up to 9.4 mm (0.37”).
Materials and technical details • Joint formed of slippery aluminium profiles. • System with the capacity to absorb multi-directional movements • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available Anodised matt silver
Novojunta Pro® AL30 b h
a
h
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
NJPAL30PL25
30 mm (1.18”)
82 mm (3.29”)
3.8 mm (0.15”)
9.4 mm (+4.7/-4.7) 0.36” (+0.18/-0.18)
5 mm (+2.5/-2.5) 0.19” (+0.09/-0.09)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
42
www.emac.es
NOVOJUNTACOLOCACIÓN PRO® AL30 PERIMETER
Floor-wall, wall-wall wall-roof Overlaid • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.). • Grooved, anti-slip surface. • For joint widths up to 32 mm (1.26”). • Admission of movement up to 9.4 mm (0.37”).
Materials and technical details • Joint formed of slippery aluminium profiles. • System with the capacity to absorb multi-directional movements. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Finishes available
Anodised matt silver
Novojunta Pro® AL30 Perimeter
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
NJPPAL30PL
32 mm (1.26”)
56 mm (2.2”)
3.8 mm (0.15”)
9.4 mm (+4.7/-4.7) 0.36” (+0.18/-0.18)
5 mm (+2.5/-2.5) 0.19” (+0.09/-0.09)
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
43
® NOVOJUNTA PRO DECOR Model registered as Community design No 869890-3
Floor-floor Light load Overlaid • Expansion joint and joint cover for floors, walls and roofs. • For joint widths up to 30 mm (1.18”). • Admission of movement up to 29.1 mm (1.14”). • Grooved, anti-slip surface
Materials and technical details • Anodised aluminium profile. • Interior body of EPDM rubber with an excellent capacity for absorbing tensions and deformations. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Finishes available
Natural
Anodised matt silver
Novojunta Pro® Decor
b h a
REFERENCE NJPDAL2070 NJPDAL2070PL NJPDAL2070 NJPDAL2070PL
FINISH Natural Anodised matt silver Natural Anodised matt silver
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
12.6 mm (0.5”) 70 mm (2.75”)
20 mm (0.79”)
30 mm (0.79”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
44
EXPANSION Horizontal 3.4 mm (+1.7/-1.7) 0.13” (+0.06/-0.06) 29.1 mm (+19.1/-8) 1.14” (+0.74/-0.39)
www.emac.es
NOVOJUNTA PRO®COLOCACIÓN BASIC SP
Floor-floor Light-medium load Overlaid
Load capacity
• Expansion joints for flooring (ceramics, concrete, terrazo, stone, etc.). • For joint widths up to 45 mm (1.77”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber. • Grooved, anti-slip surface
• Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours
Materials and technical details • Light aluminium L-shaped profiles. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord.
REFERENCE
JOINT WIDTH (a)
Black 9005
Grey 7035
Beige 1013
SMOOTH GROOVED
Novojunta Pro® Basic SP
VISIBLE WIDTH (b)
RUBBER TYPE
EXPANSION Smooth rubber
EXPANSION Grooved rubber 10 mm (+5/-5) 0.39” (+0.19/-0.19)
NJPBS20*
20 mm (0.79”)
124 mm (4.88”)
smooth or grooved
8 mm (+4/-4) 0.31” (+0.15/-0.15)
NJPBS30*
30 mm (1.18”)
134 mm (5.28”)
smooth or grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
12 mm (+6/-6) 0.47” (+0.23/-0.23)
NJPBS40*
40 mm (1.57”)
144 mm (5.67”)
smooth or grooved
12 mm (+6/-6) 0.47” (+0.23/-0.23)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
*Indicate rubber colour and type (smooth or grooved).
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
45
NOVOJUNTA PRO® ANTI-SLIP
Floor-floor Medium load Overlaid
Model registered as Community design No 869891-4
• Expansion joints for flooring (ceramics, concrete, terrazo, stone, etc.). • For joint widths up to 44 mm (1.73”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber. • Grooved, anti-slip surface.
Materials and technical details
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 30 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
• Light aluminium L-shaped profiles. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Finishes available PROFILES:
RUBBERS Black 9005
Natural
Anodised matt silver
Novojunta Pro® Anti-Slip
REFERENCE
FINISH
NJPADAL2087
Natural
NJPADAL2087PL NJPADAL2097 NJPADAL2097PL
Anodised matt silver Natural Anodised matt silver
JOINT WIDTH (a)
VISIBLE WIDTH (b)
34 mm (1.34”)
87 mm (3.42”)
44 mm (1.73”)
97 mm (3.82”)
PROFILE HEIGHT (h)
20 mm (0.79”)
RUBBER TYPE
grooved
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
46
EXPANSION horizontal 10 mm (+5/-5) 0.39” (+0.19/-0.19) 14 mm (+7/-7) 0.55” (+0.27/-0.27)
www.emac.es
Floor-wall Overlaid
NOVOJUNTA PRO® OVERLAIDCOLOCACIÓN PERIMETER Model registered as Community design No 869888-1
• Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.). It is the perfect complement to the Novojunta Pro@ Aluminium. • For joint widths up to 44 mm (1.73”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber.
Materials and technical details • Aluminium profiles. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Optional: firestop cord.
Rubber colours
Black 9005
Novojunta Pro® Overlaid perimeter
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION horizontal
NJPPS2058
34 mm (1.34”)
58 mm (2.28”)
20 mm (0.79”)
grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
NJPPS2068
44 mm (1.73”)
68 mm (2.68”)
20 mm (0.79”)
grooved
14 mm (+7/-7) 0.55” (+0.27/-0.27)
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
47
NOVOJUNTA PRO SP ®
Floor-floor Medium-heavy load Overlaid
OCCASIONAL USE
• Expansion joints for flooring (concrete, terrazo, stone, etc.). • For joint widths up to 50 mm (1.97”). • Admission of movement up to 20 mm (0.79”). • Replaceable rubber. • Grooved, anti-slip surface
Materials and technical details • Light aluminium L-shaped profiles. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are grooved and supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord.
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 50 kN. • Occasionally suitable for forklifts (DIN 1055) or light pallet trucks traffic. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours
Black 9005
Grey 7035
Novojunta Pro® SP
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
NJPSP35
35 mm (1.38”)
145 mm (5.7”)
NJPSP40
40 mm (1.57”)
150 mm (5.90”)
NJPSP50
50 mm (1.97”)
160 mm (6.3”)
PROFILE HEIGHT (h)
RUBBER TYPE
14 mm (+7/-7) 0.55” (+0.27/-0.27) 13 mm (0.51”)
grooved
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
48
EXPANSION Horizontal
16 mm (+8/-8) 0.63” (+0.31/-0.31) 20 mm (+10/-10) 0.79” (+0.39/-0.39)
www.emac.es
• Great expansion. Ideal for areas of seismic risk. • Admission of movement up to 65 mm (2.55”). • For joint widths up to 74 mm (2.91”). • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for perimeters and joins between construction elements (ceramics, concrete, terrazo, stone, etc.).
SE IS M IC
NOVOJUNTA PRO® COLOCACIÓN SISMO PE
Floor-wall Overlaid
Materials and technical details • Joint formed of slippery aluminium profiles in anodised matt silver. • System with the capacity to absorb large multidirectional movements • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Finishes available
Anodised matt silver
Novojunta Pro® Sismo PE
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
EXPANSION horizontal
EXPANSION vertical
NJPPEALPL25
74 mm (2.91”)
193.5 mm (7.62”)
65 mm (+32.5/-32.5) 2.55” (+1.27/-1.27)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
49
NOVOJUNTA PRO® METAL SP90 SE IS M IC
Floor-floor Medium-heavy load Overlaid
OCCASIONAL USE
• Great expansion. Ideal for areas of seismic risk. • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints for flooring (ceramic, concrete, terrazo, stone, etc.). • Grooved, anti-slip surface. • For joint widths up to 90 mm (3.54”). • Admission of movement up to 30 mm (1.18”).
Materials and technical details
Load capacity • Suitable for vehicle traffic with pneumatic tyres (DIN 1072) up to 90 kN. • Forklifts (DIN 1055) with pneumatic tyres up to 35 kN. Important note: The operation, expansion capacity and load capacity are guaranteed only if installation is performed following the instructions given in the technical file.
• Joint formed of slippery aluminium profiles. • System with the capacity to absorb large multidirectional movements. • Great resistance to wear from friction. • Profiles supplied in standard lengths of 3 m (118.1”). • Supplied pre-assembled with protective film on the visible face. • A full metre includes all fastenings. • Optional: firestop cord.
Rubber colours
Natural
Novojunta Pro® Metal SP90
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
EXPANSION Horizontal
NJPMSP90NA
90 mm (3.54”)
230 mm (9.05”)
15 mm (0.59”) 0.59” (+0.29/-0.29)
30 mm (+15/-15) 1.18” (+0.59/-0.59)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
50
www.emac.es
9. VERTICAL JOINTS
u 51
® NOVOJUNTA PRO AL30 Model registered as Community design No 1815762-0001
Wall/Wall Overlaid
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints in walls. • For joint widths up to 30 mm (1.18”). • Admission of movement up to 9.4 mm (0.37”).
Materials and technical details • Joint formed of slippery aluminium profiles. • System with the capacity to absorb multi-directional movements. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Finishes available
Anodised matt silver
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Novojunta Pro® AL30
b h
a
h
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
NJPAL30PL25
30 mm (1.18”)
82 mm (3.23”)
3.8 mm (0.15”)
9.4 mm (+4.7/-4.7) 0.37” (+0.18/-0.18)
5 mm (+2.5/-2.5) 0.2” (+0.1/-0.1)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
52
www.emac.es
NOVOJUNTA PRO®COLOCACIÓN AL30 RS
Wall/Wall Flush-mounted
• Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Expansion joints in floors and walls. • For joint widths up to 30 mm (1.18”). • Admission of movement up to 9.4 mm (0.37”).
Materials and technical details • Joint formed of aluminium profiles. • System with the capacity to absorb multi-directional movements. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Finishes available
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Anodised matt silver
Novojunta Pro® AL30 RS
c b h a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
PROFILE HEIGHT (h)
EXPANSION horizontal
EXPANSION vertical
NJPAL30RSPL
30 mm (1.18”)
32.5 mm (1.28”)
84 mm (3.3”)
12.5 mm (0.49”)
9.4 mm (+4.7/-4.7) 0.37” (+0.18/-0.18)
5 mm (+2.5/-2.5) 0.2” (+0.1/-0.1)
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
53
® NOVOJUNTA PRO DECOR Model registered as Community design No 869890-3
Wall/Wall Overlaid
• Expansion joint and joint cover for floors, walls and roofs. • For joint widths up to 30 mm (1.18”). • Admission of movement up to 29.1 mm (1.14”).
Materials and technical details • Anodised aluminium profile. • Interior body of EPDM rubber with an excellent capacity for absorbing tensions and deformations. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Finishes available
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file. Natural
Anodised matt silver
Novojunta Pro® DECOR
b h a
REFERENCE NJPDAL2070 NJPDAL2070PL NJPDAL2070 NJPDAL2070PL
FINISH Natural Anodised matt silver Natural Anodised matt silver
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
12.6 mm (0.5”) 87 mm (3.42”)
20 mm (0.79”)
30 mm (1.18”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
54
EXPANSION Horizontal 3.4 mm (+1.7/-1.7) 0.13” (+0.06/-0.06) 29.1 mm (+19.1/-8) 1.14” (+0.74/-0.39)
www.emac.es
NOVOJUNTA PRO®COLOCACIÓN BASIC VT
Wall-wall Flush-mounted
• Expansion joints in walls. • For joint widths up to 45 mm (1.77”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber. • Safe and easy attachment thanks to the perforated profiles and fast anchor bolts.
Materials and technical details • Light aluminium L-shaped profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord.
Rubber colours
Black 9005
Grey 7035
Beige 1013
SMOOTH
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
GROOVED
Novojunta Pro® BASIC VT
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
TOTAL WIDTH (c)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Smooth rubber
EXPANSION Grooved rubber
NJPB2012*
20 mm (0.79”)
24 mm (0.94”)
104 mm (4.09”)
12.5 mm (0.49”)
smooth or grooved
8 mm (+4/-4) 0.31” (+0.15/-0.15)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
NJPB3012*
30 mm (1.18”)
34 mm (1.34”)
114 mm (4.49”)
12.5 mm (0.49”)
smooth or grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
12 mm (+6/-6) 0.47” (+0.23/-0.23)
NJPB4012*
40 mm (1.57”)
44 mm (1.73”)
124 mm (4.88”)
12.5 mm (0.49”)
smooth or grooved
12 mm (+6/-6) 0.47” (+0.23/-0.23)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
*Indicate rubber colour and type (smooth or grooved).
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
55
NOVOJUNTA PRO® BASIC VT SP
Wall-wall Overlaid • Expansion joints in walls. • For joint widths up to 45 mm (1.77”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber.
Materials and technical details • Light aluminium L-shaped profiles. • Central insert of synthetic rubber with an excellent capacity
Rubber colours
Negro 9005
Gris 7035
Beige 1013
to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • 3 measurements of rubber (20, 30 and 40 mm / 0.79”, 1.18” and 1.57”), with a smooth or grooved surface. • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord.
SMOOTH
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
GROOVED
Novojunta Pro® Basic VT SP
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
RUBBER TYPE
EXPANSION Smooth rubber
EXPANSION Grooved rubber
NJPBS20*
20 mm (0.79”)
124 mm (4.88”)
12.5 mm (0.49”)
smooth or grooved
8 mm (+4/-4) 0.31” (+0.15/-0.15)
110 mm (+5/-5) 0.39” (+0.19/-0.19)
NJPBS30*
30 mm (1.18”)
134 mm (5.27”)
12.5 mm (0.49”)
smooth or grooved
10 mm (+5/-5) 0.39” (+0.19/-0.19)
12 mm (+6/-6) 0.47” (+0.23/-0.23)
NJPBS40*
40 mm (1.57”)
144 mm (5.67”)
12.5 mm (0.49”)
smooth or grooved
12 mm (+6/-6) 0.47” (+0.23/-0.23)
14 mm (+7/-7) 0.55” (+0.27/-0.27)
*Indicate rubber colour and type (smooth or grooved).
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
56
www.emac.es
® COLOCACIÓN NOVOJUNTA PRO ANTI-SLIP Model registered as Community design No 869891-4
Wall-wall Overlaid • Expansion joints in walls. • For joint widths up to 44 mm (1.73”). • Admission of movement up to 14 mm (0.55”). • Replaceable rubber.
Materials and technical details • Light aluminium L-shaped profiles. • Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord.
Colours & Finishes RUBBERS: Black 9005
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
PROFILES:
Natural
Anodised matt silver
Novojunta Pro® Anti-slip
REFERENCE NJPADAL2087 NJPADAL2087PL NJPADAL2097 NJPADAL2097PL
www.emac.es
FINISH Natural Anodised matt silver Natural Anodised matt silver
JOINT WIDTH (a)
VISIBLE WIDTH (b)
34 mm (1.34”)
87 mm (3.42”)
PROFILE HEIGHT (h)
20 mm (0.79”) 44 mm (1.73”)
RUBBER TYPE
grooved
97 mm (3.81”)
EXPANSION horizontal 10 mm (+5/-5) 0.39” (+0.19/-0.19) 14 mm (+7/-7) 0.55” (+0.27/-0.27)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
57
Wall-wall Overlaid Large movements
NOVOJUNTA PRO SISMO PA SE IS M IC
®
• Great expansion. Ideal for areas of seismic risk or high buildings. • Admission of movement up to 130 mm (5.11”). • For joint widths up to 100 mm (3.94”). • Joint manufactured entirely in aluminium. • Great durability, without maintenance. • Vertical (walls and façades) or horizontal (roofs) expansion joints.
Materials and technical details
Finishes available
Anodised matt silver
• Joint formed of slippery aluminium profiles in anodised matt silver. • System with the capacity to absorb large multidirectional movements. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied pre-assembled, mechanised, identified with a barcode, and with protective film on the visible face. • Optional: firestop cord. Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Novojunta Pro® SISMO PA b h
a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
EXPANSION horizontal
EXPANSION vertical
NJPPAALPL25
100 mm (3.94”)
357.5 mm (14.07”)
130 mm (+65/-65) 5.12” (+2.56/-2.56)
10 mm (+5/-5) 0.39” (+0.19/-0.19)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
58
www.emac.es
NOVOJUNTACOLOCACIÓN PRO® PA
• Great expansion. Ideal for areas of seismic risk or high buildings. • Admission of movement up to 180 mm (7.09”). • For joint widths up to 330 mm (12.99”). • Vertical (walls and façades) or horizontal (roofs) expansion joints.
SE IS M IC
Wall-wall Flush-mounted Large movements
Materials and technical details • Light aluminium L-shaped profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Strip widths available of 40, 85, 145, 190 y 320 mm (1.57”, 3.35”, 5.7”, 7.48” and 12.6”). • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord.
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Rubber colours
Black 9005
Other colours available.
Novojunta Pro® PA
JOINT WIDTH (a)
VISIBLE WIDTH (b)
NJPPA2050
20-50 mm (0.79”-1.97”)
60 mm (2.36”)
40 mm (+20/-20) 1.57” (+0.78/-0.78)
NJPPA50100
50-100 mm (1.97”-3.94”)
105 mm (4.13”)
70 mm (+35/-35) 2.75” (+1.37/-1.37)
NJPPA100160
100-160 mm (3.94”-6.3”)
165 mm (6.5”)
NJPPA120200
120-200 mm (4.72”-7.87”)
210 mm (8.27”)
140 mm (+70/-70) 5.51” (+2.75/-2.75)
NJPPA200330
200-330 mm (7.87”-12.99”)
340 mm (13.38”)
180 mm (+90/-90) 7.09” (+3.54/-3.54)
REFERENCE
www.emac.es
PROFILE HEIGHT (h)
15 mm (0.59”)
RUBBER TYPE
grooved
EXPANSION
100 mm (+50/-50) 3.94” (+1.97/-1.97)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
59
Wall-wall Overlaid Large movements
NOVOJUNTA PRO PASP SE IS M IC
®
• Great expansion. Ideal for areas of seismic risk or high buildings. • Admission of movement up to 180 mm (7.09”). • For joint widths up to 360 mm (14.17”). • Vertical (walls and façades) or horizontal (roofs) expansion joints.
Materials and technical details • Matt silver anodised aluminium profiles, perforated on their base to receive the fastenings.
• Central insert of synthetic rubber with an excellent capacity to absorb multi-directional movements. Great elasticity, resistant to damp, and extreme temperatures (-30ºC up to +120ºC). • Strip widths available of 40, 85, 145, 190 y 320 mm (1.57”, 3.35”, 5.7”, 7.48” and 12.6”). • Profiles supplied in standard lengths of 3 m (118.1”). • The rubber parts are supplied in continuous rolls. • The complete kit includes all fastenings. • Optional: firestop cord.
Rubber colours
Black 9005
Other colous available.
Important note: The operation and expansion capacity are guaranteed only if installation is performed following the instructions given in the technical file.
Novojunta Pro® PASP
b h a
REFERENCE
JOINT WIDTH (a)
VISIBLE WIDTH (b)
PROFILE HEIGHT (h)
NJPASP2060
20-60 mm (0.79”-2.36”)
110 mm (4.33”)
40 mm (+20/-20) 1.57” (+0.78/-0.78)
NJPASP50120
50-120 mm (1.97”-4.72”)
155 mm (6.10”)
70 mm (+35/-35) 2.75” (+1.37/-1.37)
NJPASP110180
110-180 mm (4.33”-7.09”)
215 mm (8.46”)
NJPASP120240
120-240 mm (4.72”-9.45”)
260 mm (10.24”)
140 mm (+70/-70) 5.51” (+2.75/-2.75)
NJPASP240360
240-360 mm (9.45”-14.17”)
390 mm (15.35”)
180 mm (+90/-90) 7.09” (+3.54/-3.54)
12 mm (0.47”)
RUBBER TYPE
grooved
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
60
EXPANSION
100 mm (+50/-50) 3.94” (+1.97/-1.97)
www.emac.es
10. WATERTIGHT MEMBRANE
u 61
WATERTIGHT MEMBRANE
• Membrane of EPDM rubber with adhesive incorporated to seal expansion joints that must be watertight. • They can be installed to complement a system of profiles in an expansion joint, or as an individual product. • Great elasticity. They allow multi-directional movements. • Waterproof. • Resistant to extreme temperatures (-30ºC to +120ºC), diluted acids or moderate concentrates, steam and hot water. • Does not give off toxic smoke in the event of fire.
REFERENCE
MEMBRANE WIDTH
JOINT WIDTH
PRESENTATION
MEMEST140
140 mm (5.51”)
30 mm (1.18”)
10 or 20 lineal meters rolls
MEMEST170
170 mm (6.69”)
40 mm (1.57”)
10 or 20 lineal meters rolls
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
62
www.emac.es
11. FIRESTOP JOINTS
u
Our firestop joint systems ensure a hermetic seal against flames and hot or inflammable gases, avoiding any chimney effect among construction elements, both horizontally and vertically. The joints must ensure a degree of fire barrier protection that at least equals the protection on the works for which they are destined. The combination between mastic, firestop cord and the different finishing systems on joints enables between 2 and 4 hours of fire protection to be achieved. Our firestop joint systems have surpassed CSTB trials, which certify the duration of isolation of flames and hot gases, as well as thermal insulation.
63
FIRESTOP CORD • For standard and seismic joints from 10 to 200 mm (0.39 - 7.87”) wide, in floors, walls and roofs. • Cord composed of fireproof, non-biodegradable, mineral fibres, covered in a network of fibreglass hairs. • Reaction to fire: Class M0 (incombustible). • Resistance to fire: 240 minutes as per Standard EN 1366-4. • Pursuant to the most recent European standards and regulations: • Does not absorb humidity. • Unaffected by the usual aggressive chemical agents. • Easy to install using refractory glue. • Does not contain asbestos. • Chemically neutral, it does not cause toxic gases to escape in the event of fire. • Use temperature: 780º C • Fusion temperature: 1200º C
REFERENCE
JOINT WIDTH (DISTANCE BETWEEN FRAMES)
CORD DIAMETER
PRESENTATION
NJCF12
10 mm (0.39”)
12 mm (0.47”)
50 m (54.68 yd) roll
NJCF20
15 mm (0.59”)
20 mm (0.79”)
30 m (32.8 yd) roll
NJCF30
20 mm (0.79”)
30 mm (1.18”)
30 m (32.8 yd) roll
NJCF40
25 mm (0.98”)
40 mm (1.57”)
30 m (32.8 yd) roll
NJCF50
35 mm (1.38”)
50 mm (1.97”)
25 m (27.34 yd) roll
NJCF60
40 mm (1.57”)
60 mm (2.36”)
25 m (27.34 yd) roll
NJCF70
50 mm (1.97”)
70 mm (2.75”)
20 m (21.87 yd) roll
NJCF80
55 mm (2.16”)
80 mm (3.15”)
20 m (21.87 yd) roll 18 m (19.6 yd) roll
NJCF90
60 mm (2.36”)
90 mm (3.54”)
NJCF100
70 mm (2.75”)
100 mm (3.94”)
10 m (10.9 yd) roll
NJCF120
80 mm (3.15”)
120 mm (4.72”)
2 m (78.7”) section
NJCF150
100 mm (3.94”)
150 mm (5.90”)
2 m (78.7”) section
NJCF180
120 mm (4.72”)
180 mm (7.09”)
2 m (78.7”) section
For joint widths greater than 120 mm (4.72”), ask us.
FIRESTOP CORD ACCESSORIES REFRACTORY GLUE • To glue cords to the sides of the joint. • Approximate consumption: 50 g per full linear metre (2 sides). REFERENCE
CONTAINER SIZE
NJCFCOLA14
1,4 kg.
NJCFCOLA07
7 kg.
FELT JOINTS • Recommended for connecting different cord sections. • Consumption: 4 units per linear metre REFERENCE
PRESENTATION
NJCFUN300
300 mm (11.8”), 20 m (21.87 yd) roll.
NJCFUN1000
1000 mm (39.37”), 20 m (21.87 yd) roll.
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
64
www.emac.es
FIRESTOP MASTIC • Silicon elastomer, resistant to high temperatures. • Light grey. • Density: 1.24. • Hardness Shore A: 16. • Expansion capacity until breakage: 450% (DIN53504) • Service temperature: - 50ºC +120ºC. • Good chemical resistance to oxidation, ozone, salt air, bleach, acids and the usual diluted bases and solvents. • Does not give off toxic smoke in the event of fire.
REFERENCE
PRESENTATION
NJCFMASTIC
Box of 25 x 1/3-litre cartridges
Approximate consumption: MASTIC LAYER
CONSUMPTION X 1/3-LITRE CARTRIDGE
10 mm (0.39”)
8 mm (0.31”)
3.9 m (153.5”)
20 mm (0.79”)
10 mm (0.39”)
1.5 m (59.05”)
30 mm (1.18”)
15 mm (0.59”)
0.7 m (27.56”)
40 mm (1.57”)
20 mm (0.79”)
0.3 m (11.81”)
50 mm (1.97”)
25 mm (0.98”)
0.2 m (7.87”)
JOINT WIDTH
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
65
66
12. RETRACTION JOINTS IN CONCRETE FLOORS AND MORTAR SCREEDS
u 67
NOVOJUNTA® HORMIGONADO • Fractioning joint for controlling and absorbing floor movements, thereby avoiding cracking. • It controls the expansion and retraction of the concrete in floors up to 24 cm (9.4”) thick. • Manufactured in PVC and available in heights of 40 (1.6”) and 80 mm (3.15”). • Easy handling. No need for cutting and sealing. • Acts as formwork and screed • It does not deteriorate over time. • Once finished, it is practically invisible. • Perfect adherence.
Materials and technical details COLOCACIÓN 1. Attach the profiles with some dabs of concrete every 60-80 cm (25-30”). 2. Level and finish attachment leaving the upper third closest to the vertex free. 3. Cut the intersections using a mitre block and hacksaw to ensure the vertices coincide perfectly. 4. Do not place dabs of concrete at the intersections. The closest must be 20- 25 cm (8-10”) away. 5. The profiles are simply joined by inserting a rod or corrugated wire into the gaps in the joints. 6. Concrete pouring: pour either traditionally or by pumping. 7. Straight-edging and floating: do the straight-edging manually and then use the concrete vibrator. This process avoids deterioration of the joint. 8. Finish: leave the joint vertex free for a perfect finish.
REFERENCE
WIDTH (a)
NJHOR80GR25
60 mm (2.36”)
NJHOR40GR25
30 mm (1.18”)
VISIBLE WIDTH (b) 2 mm (0.1”)
HEIGHT PROFILE (h)
QUANTITY X BOX
80 mm (3.15”)
20 bars
40 mm (1.57”)
60 bars
• Hollow, extruded PVC profile in cement grey. • Approximate weight: 500 g/ml (80 mm / 3.15” model) and 250 g/ml (40 mm / 1.6” model). • Profiles supplied in standard lengths of 2.5 m (98.4”). • Presentation in cardboard pallet boxes. Novojunta® Hormigonado
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
68
www.emac.es
COLOCACIÓN NovoJunta Pro® HORMIGONADO • Profile for induction of fractioning for control joints or contraction of concrete works. • Manufactured in PVC, this protects the concrete by allowing the initial retraction movement and later expansion and contraction movements. • Once installed, it remains gripped in the concrete.
Novojunta Pro® Hormigonado
REFERENCE
WIDTH (a)
VISIBLE WIDTH (b)
HEIGHT PROFILE (h)
QUANTITY X BOX
NJPHOR40GR25
38 mm (1.5”)
2 mm (0.1”)
40 mm (1.57”)
25 bars
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
69
70
13. JOINT COVERS
u 71
• NOVOTAPAJUNTAS NDP • It protects and beautifies the expansion joints on façades, walls, roofs and floors bearing light traffic. • Designed to cover joints from 10 to 130 mm wide (0.4”5.12”). • Fast and easy to install thanks to its clip system, avoiding the use of adhesives and screws. • For new work or renovations. • For interior or exterior use. • This is an ideal profile for all types of buildings: hospitals, shopping centres, airports, hotels, homes, etc. • Manufactured in anti-UV PVC. • 4 profile models available by width: 50, 70, 90 and 150 mm (2”, 2.8”, 3.5” and 5.9”). • Flat and angled models. • Colours available: white (RAL 9016), beige (RAL 1015) and grey (RAL 7035).
INSTALLATION 1. Insert a clip. 2. Change the direction of clips to insert one after another. 3. Prepared for installation. 4. Final placement. 1.
2.
Materials and technical details • Manufactured in PVC according to the latest standards, production conforming to ISO 9001. • The clips, manufactured in stainless steel, guarantee stable attachment yet permanent flexibility (spring effect). There are 4 models of clip available according to the width of joint to be covered. • Profiles supplied in standard lengths of 3 m (118”). • The profile is supplied with the appropriate clip model and in the quantity required (5 clips for each 3-m / 118” profile). Novotapajuntas NDP Flat
3.
Novotapajuntas NDP Angle
4.
S TYPE
Flat
Angle
L JOINT WIDTH (a)
PROFILE WIDTH (b)
Maximum 35 mm (1.38”)
50 mm (1.97”)
Maximum 50 mm (1.97”)
70 mm (2.75”)
Maximum 70 mm (2.75”)
XL COLOURS AVAILABLE
XXL MODEL OF CLIP
REFERENCE
White, Beige, Grey
S
NTDPP50*3
White, Beige, Grey
S/L
NTDPP70*3
90 mm (3.54”)
White
S / L / XL
NTDPP9OBL
Maximum 130 mm (5.12”)
150 mm (5.90”)
White
S / L / XL / XXL
NTDPP150BL
Maximum 35 mm (1.38”)
50 mm (1.97”)
White, Beige, Grey
S
NTDPP50*3
Maximum 50 mm (1.97”)
70 mm (2.75”)
White, Beige, Grey
S/L
NTDPP70*3
Maximum 70 mm (2.75”)
90 mm (3.54”)
White
S / L / XL
NTDPP90BL
NUMBER OF CLIPS
5
*Indicate colour: White (BL), Beige (BE), Grey (GR). EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
72
www.emac.es
COLOCACIÓN NOVOTAPAJUNTAS NDA • It protects and beautifies the expansion joints on façades, walls, roofs and floors bearing light traffic. • Designed to cover joints from 10 to 150 mm wide (0.4”5.9”). • Fast and easy to install thanks to its clip system, avoiding the use of adhesives and screws. • For new work or renovations. • For interior or exterior use. • This is an ideal profile for all types of buildings: hospitals, shopping centres, airports, hotels, homes, etc. • Manufactured in aluminium. • 7 profile models available for flat installation: 50, 70, 90, 120, 140, 180 and 210 mm (2”, 2.8”, 3.5”, 4.7”, 5.5”, 7.1” and 8.3”). • 4 profile models available for angled installation: 50, 70, 90 and 120 mm (2”, 2.8”, 3.5” and 4.7”).
Materials and technical details
INSTALLATION 1. Insert a clip. 2. Change the direction of clips to insert one after another. 3. Prepared for installation. 4. Final placement.
• Manufactured in anodised, extruded aluminium. • The clips, manufactured in stainless steel, guarantee stable attachment yet permanent flexibility (spring effect). There are 4 models of clip available according to the width of joint to be covered. • Profiles supplied in standard lengths of 3 m (118”). • The profile is supplied with the appropriate clip model and in the quantity required for installation to wall or floor.
Novotapajuntas NDA Flat
Flat
Angle
www.emac.es
2.
3.
4.
Novotapajuntas NDA Angle
S TYPE
1.
L JOINT WIDTH (a)
XL PROFILE WIDTH (b)
MODEL OF CLIP
XXL REFERENCE
NUMBER OF CLIPS
10 to 35 mm (0.39” to 1.38”)
50 mm (1.97”)
S
NTDAP50ALNA3
Walls: 4 Floors: 10
35 to 50 mm (1.38” to 1.97”)
70 mm (2.75”)
S/L
NTDAP70ALNA3
Walls: 4 Floors: 10
40 to 70 mm (1.57” to 2.75”)
90 mm (3.54”)
L / XL
NTDAP90ALNA3
Walls: 4 Floors: 10
60 to 90 mm (2.36” to 3.54”)
120 mm (4.72”)
L / XL
NTDAP120ALN3
Walls: 4 Floors: 10
80 to 110 mm (3.15” to 4.33”)
140 mm (5.51”)
XL
NTDAP140ALN3
Walls: 4 Floors: 10
100 to 130 mm (3.94” to 5.12”)
180 mm (7.09”)
XL / XXL
NTDAP180ALN3
Walls: 4 Floors: 10
120 to 150 mm (4.72” to 5.90”)
210 mm (8.27”)
XXL
NTDAP210ALN3
Walls: 4 Floors: 10
10 to 35 mm (0.39” to 1.38”)
50 mm (1.97”)
S
NTDAA50ALNA3
Walls: 4 Floors: 10
35 to 50 mm (1.38” to 1.97”)
70 mm (2.75”)
S/L
NTDAA70ALNA3
Walls: 4 Floors: 10
40 to 70 mm (1.57” to 2.75”)
90 mm (3.54”)
L / XL
NTDAA90ALNA3
Walls: 4 Floors: 10
60 to 90 mm (2.36” to 3.54”)
120 mm (4.72”)
L / XL
NTDAA120ALNA
Walls: 4 Floors: 10
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
73
NOVOTAPAJUNTAS NDAS • This joint cover protects and beautifies the expansion joints on walls and floors. • Manufactured in matt silver anodised aluminium. Highly decorative. • It allows the smooth, jolt-free passage of shopping trolleys, wheelchairs, stretchers, etc. • It is supplied with flexible butyl adhesive for immediate attachment. By order it can also be supplied with countersunk holes on one side. • Profiles supplied in standard lengths of 3 m (118”). • Available in 5 sizes: 60, 80, 100, 120 and 140 mm (2.4”, 3.2”, 3.9”, 4.7” and 5.5”). •• Novotapajuntas NDAS
PROFILE WIDTH (b)
PACKAGING
REFERENCE
60 mm (2.36”)
10 units
NTDAS60ALPL3
80 mm (3.15”)
10 units
NTDAS80ALPL3
100 mm (3.94”)
10 units
NTDAS100ALPL
120 mm (4.72”)
10 units
NTDAS120ALPL
140 mm (5.51”)
10 units
NTDAS140ALPL
NOVOTAPAJUNTAS NCJE • To cover the expansion joints on walls, façades, roofs and floors. • Manufactured in natural extruded aluminium. • Visible face grooved anti-slip. • Allows the passage of intense medium-load traffic. • Profiles supplied in standard lengths of 3 m (118”). • Available in 4 sizes: 120, 180, 210 and 320 mm (4.7”, 7.1”, 8.3” and 12.6”). • Supplied with countersunk holes drilled in one side for screw installation. •• Novotapajuntas NCJE
JOINT WIDTH (a)
PROFILE WIDTH (b)
REFERENCE
Up to 50 mm (1.97”)
120 mm (4.72”)
NTCJE120ALNA
Up to 100 mm (3.94”)
180 mm (7.09”)
NTCJE180ALNA
Up to 130 mm (5.12”)
210 mm (8.27”)
NTCJE210ALNA
Up to 200 mm (7.87”)
320 mm (12.6”)
NTCJE320ALNA
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
74
www.emac.es
NOVOTAPAJUNTAS GTA ••
• This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors. • Manufactured in matt silver anodised aluminium. Highly decorative. • Its visible face is grooved and anti-slip. It is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face. • The 80-mm (3.15”) model can also be supplied with incorporated adhesive for fast, easy installation, or with countersunk holes for attachment using screws. • The 135-mm (5.31”) model can also be supplied with countersunk holes for attachment using screws.
GTA 80
GTA 135
MODEL
JOINT WIDTH (a)
PROFILE WIDTH (b)
PACKAGING
GTA80
Up to 30 mm (1.18”)
80 mm (3.15”)
10 units
GTA135
www.emac.es
Up to 55 mm (2.16”)
135 mm (5.31”)
5 units
INSTALLATION
REFERENCE
Without adhesive
NTGTAL80PL25
With adhesive
NTGTAL80PLAD
With holes
NTGTAL80PLA
Without holes
NTGTAL135PL
With holes
NTGTAL135PLA
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
75
NOVOTAPAJUNTAS TX • • This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors. • Manufactured in shiny stainless steel AISI-304. Highly decorative. • This is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face. • Also available with adhesive incorporated for fast, easy installation.
Novotapajuntas TX
MODEL
JOINT WIDTH (a)
PROFILE WIDTH (b)
PACKAGING
TX60
Up to 20 mm (0.79”)
60 mm (2.36”)
10 units
TX80
Up to 30 mm (1.18”)
80 mm (3.15”)
10 units
TX100
Up to 40 mm (1.57”)
100 mm (3.94”)
5 units
INSTALLATION Without adhesive With adhesive Without adhesive
REFERENCE NTTXAI60NA NTTXAI60NAAD NTTXAI80NA
With adhesive
NTTXAI80NAAD
Without adhesive
NTTXAI100NA
With adhesive
NTTXAI100NAD
Suelo/pared Carga ligera Enrasada
NOVOTAPAJUNTAS GTX NDAS
• This joint cover protects and beautifies the expansion joints on façades, walls, roofs and floors. • Manufactured in shiny stainless steel AISI-304. Highly decorative. • High resistance. This is an ideal profile for high-traffic areas such as hospitals, shopping centres, airports and hotels. • Profiles supplied in standard lengths of 2 m (98.4”). • Supplied with protective film on the visible face. • Supplied with countersunk holes (10 mm / 0.4” diameter) drilled in one side for screw installation (not included).
Novotapajuntas GTX
MODEL
JOINT WIDTH (a)
PROFILE WIDTH (b)
PACKAGING
REFERENCE
GTX180
Up to 100 mm (3.94”)
180 mm (7.09”)
4 units
NTGTXAI180NA
GTX220
Up to 120 mm (4.72”)
220 mm (8.66”)
4 units
NTGTXAI220NA
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
76
www.emac.es
COLOCACIÓN NOVOSEPARA 10 • Profile of matt silver anodised aluminium, designed for decorative separation between pavings of identical or contrasting finishes, providing the resistance typical of this material. • Easy to install, it is attached once the pavement has been laid. The upper section covers the joint created by the tiles and their display face, wider and more visible, imbues any environment with an elegant touch. • This is a perfect profile to install on flexible paving, for example in gymnasiums. • It is also ideal for covering those joints that have deteriorated over time. • Available in 2 lengths: 1 m and 2.5 m (39.4” and 98.4”).
Novotapajuntas NDA
www.emac.es
WIDTH (b)
PACKAGING
40 mm (1.57”)
50 units
PROFILE LENGTH
REFERENCE
100 cm (39.4”)
NS10AL40PL1
250 cm (98.4”)
NS10AL40PL25
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
77
78
14. EXPANSION AND FRACTIONING JOINTS FOR PAVING
u 79
NOVOJUNTA® METALLIC • • Fractioning and expansion joint consisting of two aluminium profiles with a central body of EPDM microcellular rubber. • Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations. • Available for paving up to 125 mm (4.9”) thick. For other thicknesses, ask us. • It allows polishing of the floor after installation. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face. • Available in black, grey and marble (up to 30 mm / 1.2” high). Also in brown, white and beige in the model that is 4.5 mm / 0.18” high.
Novojunta® Metallic
General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
PROFILE HEIGHT (h)
4.5 mm (0.18”)
6 mm (0.23”)
8 mm (0.31”)
10 mm (0.39”)
12.5 mm (0.49”)
15 mm (0.59”)
VISIBLE WIDTH (a)
6.4 mm (0.25”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
EXPANSION Horizontal
4.5 mm (+0.5/-4) 0.18” (+0.02/-0.16)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
PACKAGING
20 units
20 units
20 units
20 units
3 mm (+1/-2) 0.12” (+0.04/-0.08)
20 units
3 mm (+1/-2) 0.12” (+0.04/-0.08)
20 units
COLOUR White
NJUAL04BL25
Grey
NJUAL04GR25
Beige
NJUAL04BE25
Brown
NJUAL04MA25
Black
NJUAL04NE25
Grey
NJUAL06NA25
Black
NJUAL06NE25
Ivory
NJUAL06MF25
Grey
NJUAL08NA25
Black
NJUAL08NE25
Ivory
NJUAL08MF25
Grey
NJUAL10NA25
Black
NJUAL10NE25
Ivory
NJUAL10MF25
Grey
NJUAL12NA25
Black
NJUAL12NE25
Ivory
NJUAL12MF25
Grey
NJUAL15NA25
Black
NJUAL15NE25
Ivory
NJUAL15MF25
Gris 17,5 mm
80
20 mm
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 3 Quart Poblet, Valencia, Spain • Tel.: (+34) 261 • info@emac.es 8 mm mmde(+1/-2) 20961 ud.532 200 - Fax: (+34) 961 532Negro EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it Marfil EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
8 mm
3 mm (+1/-2)
10 ud.
REFERENCE
NJUAL17NA25 NJUAL17NE25 NJUAL17MF25 www.emac.es
Gris
NJUAL20NA25
Negro
NJUAL20NE25
15 mm
17.5 mm (0.69”)
20 mm (0.79”)
22.5 mm (0.88”)
25 mm (0.98”)
27.5 mm (1.08”)
8 mm
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
20 ud.
20 units
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
Gris
NJUAL15NA25
Negro
NJUAL15NE25
Marfil
NJUAL15MF25
Grey
NJUAL17NA25
Black
NJUAL17NE25
Ivory
NJUAL17MF25
Grey
NJUAL20NA25
Black
NJUAL20NE25
Ivory
NJUAL20MF25
Grey
NJUAL22NA25
Black
NJUAL22NE25
Ivory
NJUAL22MF25
Grey
NJUAL25NA25
Black
NJUAL25NE25
Ivory
NJUAL25MF25
Grey
NJUAL27NA25
Black
NJUAL27NE25
Ivory
NJUAL27MF25
Grey
NJUAL30NA25
Black
NJUAL30NE25
Ivory
NJUAL30MF25
8 mm (0.31”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
41 mm (1.61”)
11 mm (0.43”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
Black
NJUAL41NA25
51 mm (2.01”)
11 mm (0.43”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
Black
NJUAL51NA25
125 mm (4.92”)
11 mm (0.43”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
4 units
Black
NJUAL125NA25
30 mm (1.18”)
NOVOJUNTA® METALLIC PERIMETER • Profile for perimeter expansion joints consisting of an aluminium profile with a body of EPDM micro-cellular rubber. • Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations. • Available for paving up to 12 mm (0.47”) thick. • It allows polishing of the floor after installation. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face. • Available in black.
Novojunta® Metallic Perimeter
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
EXPANSION Horizontal
PACKAGING
COLOUR
REFERENCE
10 mm (0.39”)
6 mm (0.23”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
20 units
Black
NJUPAL10NA
12 mm (0.47”)
6 mm (0.23”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
20 units
Black
NJUPAL12NA
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
81
NOVOJUNTA DECOR® • • Fractioning and expansion joint consisting of two metal profiles with a central body of EPDM micro-cellular rubber. • Available in shiny stainless steel AISI-304, or in matt silver anodised or natural aluminium. • This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body. • Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations. • Available for paving up to 126 mm (4.9”) thick. For other thicknesses, ask us. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
Novojunta Decor® Aluminium
General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
MATERIAL
PROFILE HEIGHT (h) 9.5 mm (0.37”)
12 mm (0.47”)
15 mm (0.59”) Aluminium
Stainless steel
VISIBLE WIDTH (a) 12.5 mm (0.49”)
12.5 mm (0.49”)
12.5 mm (0.49”)
EXPANSION Horizontal 3 mm (+1/-2) 0.12” (+0.04/-0.08) 3 mm (+1/-2) 0.12” (+0.04/-0.08) 3 mm (+1/-2) 0.12” (+0.04/-0.08)
Novojunta Decor® Stainless Steel
PACKAGING 20 units
20 units
20 units
FINISH
NJDEAL10NA
Anodised matt silver
NJDEAL10PL
Natural
NJDEAL12NA
Anodised matt silver
NJDEAL12PL
Natural
NJDEAL15NA
Anodised matt silver
NJDEAL15PL
Natural
NJDEAL20NA
Anodised matt silver
NJDEAL20PL
12.5 mm (0.49”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
41 mm (1.61”)
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
Natural
NJDEAL41NA
51 mm (2”)
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
Natural
NJDEAL51NA
126 mm (4.96”)
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
4 units
Natural
NJDEAL126NA
10 mm (0.39”)
12.5 mm (0.49”)
3 mm (+1/-2) 0.12” (+0.04/-0.08
20 units
High brightness
NJDEAI10NA
12 mm (0.47”)
17 mm (0.67”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
High brightness
NJDEAI12NA
15 mm (0.59”)
17 mm (0.67”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
High brightness
NJDEAI15NA
20 mm (0.79”)
12.5 mm (0.49”)
3 mm (+1/-2) 0.12” (+0.04/-0.08)
10 units
High brightness
NJDEAI20NA
41 mm (1.61”)
10.8 mm (0.42”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
High brightness
NJDEAI41NA
51 mm (2”)
10.8 mm (0.42”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
High brightness
NJDEAI51NA
126 mm (4.96”)
10.8 mm (0.42”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
4 units
High brightness
NJDEAI126NA
20 mm (0.79”)
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
82
REFERENCE
Natural
www.emac.es
COLOCACIÓN ® NOVOJUNTA DECOR XL • Fractioning and expansion joint consisting of two matt silver anodised aluminium profiles with a central body of EPDM micro-cellular rubber. • This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body. • Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations. • The central EPDM micro-cellular rubber body, 20 mm (0.79”) thick, allows a great deal of movement. Its size and functionality enables its application as a structural joint. • Its use is also recommended in façades. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
General recommendations for installation:
Novojunta Decor® XL
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 40 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
HEIGHT PROFILE (h)
VISIBLE WIDTH (a)
EXPANSION Horizontal
PACKAGING
FINISH
REFERENCE
12 mm (0.47”)
28 mm (1.10”)
12 mm (+2/-10) 0.47” (+0.08/-0.39)
10 units
Anodised matt silver
NJDEXLAL12PL
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
83
NOVOJUNTA® METALLIC FLECHA • • Arrow-shaped fractioning and expansion joint, designed to be installed in conjunction with thick paving.
• It consists of two natural aluminium profiles and a central body of EPDM micro-cellular rubber, with an excellent capacity for absorbing the contractions and expansions of the paving. • This movement joint is especially conceived for installing paving using traditional mortar. We recommend installing it slightly below the level of the paving, to enable the floor to be polished. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
Novojunta® Metallic flecha
General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
HEIGHT PROFILE (h)
VISIBLE WIDTH (a)
EXPANSION Horizontal
PACKAGING
REFERENCE
26 mm (1.02”)
30 units
NJFAL26NA
35 mm (1.38”)
30 units
NJFAL35NA
50 mm (1.97”)
20 units
NJFAL50NA
65 mm (2.56”)
11 mm (0.43”)
FINISH
Natural
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13)
10 units
NJFAL65NA
85 mm (3.35”)
10 units
NJFAL85NA
125 mm (4.92”)
5 units
NJFAL125NA
NOVOJUNTA® JSI • Profile with a body manufactured in PVC and a central clipped area manufactured in aluminium. • It is used as a dividing joint between paving and can be installed in all type of surfaces. • It can be attached before or after installing the paving. • It allows later polishing. • Profiles supplied in standard lengths of 3 m (118”).
Novojunta® JSI
HEIGHT PROFILE (h)
VISIBLE WIDTH (a)
PACKAGING
REFERENCE
30 mm (1.18”)
6 mm (0.23”)
10 units
NJS1630AL3
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
84
www.emac.es
COLOCACIÓN NOVOJUNTA® DECOR FLECHA • Arrow-shaped fractioning and expansion joint, designed to be installed in conjunction with thick paving. • It consists of two metal profiles and a central body of EPDM micro-cellular rubber, with an excellent capacity for absorbing the contractions and expansions of the paving. • Available in shiny stainless steel, or in matt silver anodised or natural aluminium. • This movement joint is highly decorative, since it has a beautifying membrane on its visible face that masks the inner EPDM body. • Especially for installing paving using traditional mortar. We recommend installing it slightly below the level of the paving, to enable the floor to be polished. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
Novojunta® Decor flecha Aluminium
General recommendations for installation:
Stainless steel
• For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
MATERIAL
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
EXPANSION Horizontal
PACKAGING
30 mm (1.18”)
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
30 units
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
50 mm (1.97”)
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
30 units
65 mm (2.56”)
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
10 units
35 mm (1.38”)
Aluminium
85 mm (3.35”)
www.emac.es
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
10 units
REFERENCE
Natural
NJDFAL30NA
Anodised matt silver
NJDFAL30PL
Natural
NJDFAL35NA
Anodised matt silver
NJDFAL35PL
Natural
NJDFAL50NA
Anodised matt silver
NJDFAL50PL
Natural
NJDFAL65NA
Anodised matt silver
NJDFAL65PL
Natural
NJDFAL85NA
Anodised matt silver
NJDFAL85PL
Natural
NJDFAL125NA
Anodised matt silver
NJDFAL125PL
12.5 mm (0.49”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
5 units
30 mm (1.18”)
10.8 mm (0.42”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
30 units
High brightness
NJDFAI30NA
35 mm (1.38”)
10.8 mm (0.42”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
30 units
High brightness
NJDFAI35NA
50 mm (1.97”)
10.8 mm (0.42”)
4.7 mm (+1.2/-3.5) 0.18” (+0.05/-0.13))
30 units
High brightness
NJDFAI50NA
125 mm (4.92”)
Stainless steel
12.5 mm (0.49”)
30 units
FINISH
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
85
NOVOJUNTA® 1 PVC • • Fractioning and expansion joint manufactured in
co-extruded PVC, formed of one rigid PVC part that efficiently protects the paving borders, and another flexible PVC part that enables surface tensions to be absorbed. • Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations. • It is suitable for supporting all load types. • Available in 5 colours: white, grey, beige, brown and black. • Profiles supplied in standard lengths of 2.5 m (98.4”). • If the floor will be polished, we recommend installing it slightly below the pavement level.
Novojunta® 1 PVC
General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 40 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
HEIGHT PROFILE (h)
25 mm (0.98”)
30 mm (1.18”)
35 mm (1.38”)
40 mm (1.57”)
50 mm (1.97”)
VISIBLE WIDTH (a)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
EXPANSION Horizontal
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
PACKAGING
50 units
50 units
50 units
25 units
25 units
COLOUR
REFERENCE
White
NJ1PV25BL
Grey
NJ1PV25GR
Beige
NJ1PV25BE
Brown
NJ1PV25MA
Black
NJ1PV25NE
White
NJ1PV30BL
Grey
NJ1PV30GR
Beige
NJ1PV30BE
Brown
NJ1PV30MA
Black
NJ1PV30NE
White
NJ1PV35BL
Grey
NJ1PV35GR
Beige
NJ1PV35BE
Brown
NJ1PV35MA
Black
NJ1PV35NE
White
NJ1PV40BL
Grey
NJ1PV40GR
Beige
NJ1PV40BE
Brown
NJ1PV40MA
Black
NJ1PV40NE
White
NJ1PV50BL
Grey
NJ1PV50GR
Beige
NJ1PV50BE
Brown
NJ1PV50MA
Black
NJ1PV50NE
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
86
www.emac.es
COLOCACIÓN ® NOVOJUNTA 3 PVC • Fractioning and expansion joint manufactured in co-
extruded PVC, formed of one rigid PVC part that efficiently protects the paving borders, and another flexible PVC part that enables surface tensions to be absorbed. • Its main function is to avoid breakage and cracks in paving, absorbing the tensions that stem from the expansions and contractions of the paving, caused by thermal variations. • It is suitable for supporting all load types. • Available in 5 colours: white, grey, beige, brown and black. • Profiles supplied in standard lengths of 2.5 m (98.4”). • If the floor will be polished, we recommend installing it slightly below the pavement level.
Novojunta® 3 PVC
General recommendations for installation: • For exterior paving, we recommend closing surfaces of between 10 and 25 m2 maximum, without the distance between joints being greater than 5 linear metres (16 ft). • For interior paving, with fewer thermal variations, we recommend closing surfaces of up to 64 m2 maximum, without the distance between joints being greater than 8 linear metres (26 ft).
HEIGHT PROFILE (h)
6 mm (0.23”)
8 mm (0.31”)
10 mm (0.39”)
12.5 mm (0.49”)
15 mm (0.59”)
www.emac.es
VISIBLE WIDTH (a)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
8 mm (0.31”)
EXPANSION Horizontal
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
1.4 mm (+0.7/-0.7) 0.055” (+0.027/-0.027)
PACKAGING
50 units
50 units
50 units
50 units
50 units
COLOUR
REFERENCE
White
NJ3PV06BL
Grey
NJ3PV06GR
Beige
NJ3PV06BE
Brown
NJ3PV06MA
Black
NJ3PV06NE
White
NJ3PV08BL
Grey
NJ3PV08GR
Beige
NJ3PV08BE
Brown
NJ3PV08MA
Black
NJ3PV08NE
White
NJ3PV10BL
Grey
NJ3PV10GR
Beige
NJ3PV10BE
Brown
NJ3PV10MA
Black
NJ3PV10NE
White
NJ3PV12BL
Grey
NJ3PV12GR
Beige
NJ3PV12BE
Brown
NJ3PV12MA
Black
NJ3PV12NE
White
NJ3PV15BL
Grey
NJ3PV15GR
Beige
NJ3PV15BE
Brown
NJ3PV15MA
Black
NJ3PV15NE
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
87
88
15. PROFILES AND ACCESSORIES
u 89
NOVOCANTO® STAINLESS STEEL • • A rounded, high brightness profile of stainless steel AISI-304, employed as a corner piece to protect and decorate the corners of walls clad in ceramic tiles. • It is installed easily in the angle formed by the cladding. • It can further be employed as a finish on skirting boards for other types of cladding such as parquet, carpet, natural stone, etc. • Available in heights of 10 and 12 mm (0.39” and 0.47”). For other heights and finishes, ask us. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
Novocanto® stainless steel
PROFILE HEIGHT (h) 10 mm (0.39”) 12 mm (0.47”)
PACKAGING
FINISH
30 units
High brightness
REFERENCE NCAAI10NA NCAAI12NA25
NOVOCANTO® ALUMINIUM •
• Rounded aluminium profile, which is employed as a corner
piece to protect and decorate wall corners clad with ceramic tiles, providing the resistance and lightness of aluminium. • It is installed easily in the angle formed by the cladding. • It can further be employed as a finish on skirting boards for other types of cladding such as parquet, carpet, natural stone, etc. • Available in a natural finish, matt silver anodised, mirror bright anodised and white lacquer. For other colours, ask us. • Available in heights of 10 and 12 mm (0.39” and 0.47”). For other heights and finishes, ask us. • Profiles supplied in standard lengths of 2.5 m (98.4”).
PROFILE HEIGHT (h)
PACKAGING
10 mm (0.39”) 50 units 12 mm (0.47”)
FINISH
REFERENCE
Natural
NCAAL09NA25
Anodised matt silver
NCAAL09PL25
Anodised mirror bright
NCAAL09PB25
White lacquer
NCAAL10BL25
Natural
NCAAL12NA25
Anodised matt silver
NCAAL12PL25
Anodised mirror bright
NCAAL12PB25
White lacquer
NCAAL12BL25
Novocanto aluminium
Angle piece
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
90
www.emac.es
COLOCACIÓN ® NOVOCANTO PVC • A rounded PVC profile, employed as a corner piece to protect and decorate the corners of walls clad in ceramic tiles. • It is installed easily in the angle formed by the cladding. • It can further be employed as a finish on skirting boards for other types of cladding such as parquet, carpet, natural stone, etc. • Available in white and grey and in heights of 10 and 12 mm (0.39” and 0.47”). For other colours and heights, ask us.
Novocanto® PVC
PROFILE HEIGHT (h)
PACKAGING
10 mm (0.39”)
100 units
12 mm (0.47”)
100 units
COLOUR
REFERENCE
White
NCAPV10BL25
Grey
NCAPV10GR25
White
NCAPV12BL25
Grey
NCAPV12GR25
Angle piece
COLOCACIÓN NOVOYESO • PVC profile for plastered walls. • Installing before plastering it helps to achieve perfectly aligned corners, providing greater resistance to knocks and and scrapes. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novoyeso
www.emac.es
ARM DIMENSION (a)
PACKAGING
COLOUR
REFERENCE
10 mm (0.39”)
100 units
White
NYEPV25BL
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
91
MONOCAPA • • PVC profile for single-layer cladding. It leaves a perfect, permanent trace in the finishing of singlelayer façades. • It creates the effect of joints and divisions in the single layer. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Monocapa
PROFILE HEIGHT (h)
WIDTH (a)
PACKAGING
COLOUR
REFERENCE
6 mm (0.23”)
20 mm (0.79”)
100 units
White
MONPV20GR
NOVOPARED-NOVOSUELO •
PROFILE HEIGHT (h)
PACKAGING
FINISH
REFERENCE
4.5 mm (0.18”)
NSUAL04NA25
6 mm (0.23”)
NSUAL06NA25
8 mm (0.31”)
NSUAL08NA25
10 mm (0.39”)
NSUAL10NA25
12.5 mm (0.49”)
NSUAL12NA25
15 mm (0.59”) 17.5 mm (0.69”)
50 units
Natural
NSUAL15NA25 NSUAL17NA25
20 mm (0.79”)
NSUAL20NA25
22.5 mm (0.88”)
NSUAL22NA25
25 mm (0.98”)
NSUAL25NA25
27.5 mm (1.08”)
NSUAL27NA25*
30 mm (1.18”)
NSUAL30NA25
• Right-angle profile in natural aluminium, with multiple uses. • It can be used as a beautifier of joints between different materials, to separate paving, or as a corner protector. • It can be installed with claddings of between 3 and 30 mm thickness, in a wide range of measurements. • For other heights and finishes, ask us. • Profiles supplied in standard lengths of 2.5 m (98.4”). Novopared-Novosuelo
* This model is supplied in lengths of 3 m (118”).
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
92
www.emac.es
COLOCACIÓN NOVOLISTEL® BASIC STAINLESS STEEL • Decorative profile of high brightness stainless steel AISI-304, of a square cross-section. • It has multiple uses. It can be used as decorative trim, a dividing joint, a transition profile between different pavings, a corner piece, a step edge, handrail finishing, etc. • Available in heights of 10 and 12 mm (0.39” and 0.47”). • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novolistel® Basic Stainless steel
v
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
10 mm (0.39”)
8 mm (0.31”)
12 mm (0.47”)
8 mm (0.31”)
PACKAGING
FINISH
25 units
High brightness
REFERENCE NLBAI10NA25 NLBAI12NA25
COLOCACIÓN NOVOLISTEL® 3 ALUMINIUM • Decorative aluminium profile, square cross-section. • It has multiple uses. It can be used as decorative trim, a dividing joint, a transition profile between different pavings, a corner piece, a step edge, handrail finishing, etc. • Available in natural finish, matt silver anodised and mirror bright anodised. • Available in heights of 10 and 12 mm (0.39” and 0.47”). For other heights, ask us. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novolistel® 3 aluminium
PROFILE HEIGHT (h) 10 mm (0.39”)
VISIBLE WIDTH (a)
PACKAGING
10 mm (0.39”) 30 units
12 mm (0.47”)
10 mm (0.39”)
FINISH
REFERENCE
Natural
NL3AL10NA
Anodised matt silver
NL3AL10PL
Anodised mirror bright
NL3AL10PB*
Natural
NL3AL12NA
Anodised matt silver
NL3AL12PL
Anodised mirror bright
NL3AL12PB*
* Supplied with protective film on the visible face.
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
93
NOVOESCUADRA ALUMINIUM • • Profile designed to protect or decorate the corners of any type of cladding. • It is perfect for rehabilitation or reform works because it does not require alterations to be installed. It is also ideal for the protection of deteriorated or poorly finished edges on old installations. • Available in natural finish and white lacquer. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novoescuadra aluminium
ARM DIMENSION (a)
PACKAGING
20 mm (0.79”)
50 units
FINISH
REFERENCE
Natural
NECAL20NA25
White lacquer
NECAL20BL25
• NOVOESCUADRA PLUS
• Square angle profile with a wide visible face manufactured in stainless steel AISI-304, designed to protect external and internal angles (corners). • Especially recommended for the food industry. • Due to its design, it provides a finish of great beauty and resistance, both interior and exterior. • It has two attachment arms that ensure a perfect grip. • Available in high-bright and brushed stainless steel. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
Novoescuadra Plus Exterior
MODEL
PROFILE HEIGHT (h)
WIDTH (a)
PACKAGING
FINISH
REFERENCE
External angle (corner)
12 mm (0.47”)
37 mm (1.46”)
10 units
High brightness
NECPAI37NA25
Brushed
NECPAI37CE25
Internal angle (corner)
10 mm (0.39”)
37.5 mm (1.48”)
10 units
Brushed
NECPAI25ICE
Interior
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
94
www.emac.es
COLOCACIÓN NOVOSEPARA 1
• Profile of a slim visible face manufactured in brass or aluminium, designed to cover joints and separate paving. • Ideal as a dividing joint on terrazzo, marble or granite paving. • Installation is recommended ”in situ” while laying the paving. • It allows later polishing. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novosepara 1 FINISH Aluminium Brass
HEIGHT PROFILE (h)
VISIBLE WIDTH (a)
PACKAGING
REFERENCE
30 mm (1.18”)
4 mm (0.16”)
10 units
NSEAL30NA25
28.5 mm (1.12”)
5 mm (0.2”)
10 units
NSELT30NA25
25 mm (0.98”)
5 mm (0.2”)
25 units
NSELT25NA25
NOVOSEPARA 6 ALUMINIUM • Decorative profile manufactured in aluminium, designed to be installed in paving separation joints. • Its geometry enables installation in extremely thick pavings. • Available in natural and matt silver anodised aluminium. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novosepara 6 Aluminium
www.emac.es
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
PACKAGING
23 mm (0.90”)
12.5 mm (0.49”)
50 units
FINISH
REFERENCE
Natural
NJDFAL30TA
Anodised matt silver
NJDFAL30TAPL
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
95
NOVOSEPARA 9 • • Decorative profile with a broad visible face, manufactured in aluminium or stainless steel AISI-304. • It is designed to be installed in paving joins of all types and its main function is to beautify these joints. • It can be installed before or after laying the paving. • Available in intense-bright stainless steel, and in matt silver anodised aluminium. • Profiles supplied in standard lengths of 2.5 m (98.4”). • The stainless steel model is supplied with protective film on the visible face.
Novosepara 9 Aluminium MATERIAL Stainless steel
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
7 mm (0.18”)
35 mm (1.38”)
Aluminium
PACKAGING
FINISH
REFERENCE
20 units
High brightness
NS9AI07NA
50 units
Anodised matt silver
Stainless steel NS9AL35PL
NOVOPLETINA ALUMINIum • • Anti-slip matt silver anodised aluminium shim, to be installed on steps, ramps or traffic zones where non-slip properties are required. • Allows the passage of intense traffic. • It also signposts potential hazards or acts as a guide for the blind or people with reduced visibility. • Supplied with countersunk holes to be installed using screws. • Profiles supplied in standard lengths of 2.7 m (106”).
Novopletina aluminium PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
PACKAGING
REFERENCE
3 mm (0.12”)
35 mm (1.38”)
10 units.
NPLAL35PLAG
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
96
www.emac.es
COLOCACIÓN NOVOESCOCIA® 4 ALUMINIum • Half-tube aluminium profile, which is attached to already installed tiling to facilitate cleaning of the skirting boards and tiled angles. • It is attached easily using a silicone-type adhesive which is also waterproof. • Helps to comply with standard CTE-DB-HS Salubridad (Public Health), which demands in Point 2.1.3, in reference to the design of the room reserved as a container warehouse in buildings and reserve space, that ”the meeting zone between walls and the floor must be rounded”. Additionally, the regulation ordinances on hygiene and health care conditions indicate that the construction elements of these installations must be ”easy to clean and disinfect”. • Complementary pieces are available to achieve a perfect finish: interior corner, exterior corner, interior vertical finishing covers. • Available in natural aluminium finish and white lacquer. • Profiles supplied in standard lengths of 2.5 m (98.4”). • Supplied with protective film on the visible face.
Novoescocia® 4 aluminium
Complementary pieces:
external angle
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
PACKAGING
27 mm (1.06”)
38 mm (1.5”)
30 units
internal angle
FINISH
REFERENCE
Natural
NE4AL50NA25
White lacquer
NE4AL40BL
cover
vertical internal angle
COLOCACIÓN ® NOVOESCOCIA 4 PVC • Half-tube PVC profile, which is attached to already installed tiling to facilitate cleaning of the skirting boards and tiled angles. • It is attached easily using a silicone-type adhesive which is also waterproof. • Helps to comply with standard CTE-DB-HS Salubridad (Public Health), which demands in Point 2.1.3, in reference to the design of the room reserved as a container warehouse in buildings and reserve space, that ”the meeting zone between walls and the floor must be rounded”. Additionally, the regulation ordinances on hygiene and health care conditions indicate that the construction elements of these installations must be ”easy to clean and disinfect”. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novoescocia® 4 PVC
www.emac.es
PROFILE HEIGHT (h)
VISIBLE WIDTH (a)
PACKAGING
FINISH
REFERENCE
25 mm (0.98”)
36.5 mm (1.44”)
30 units
White
NE4PV4OBL
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
97
98
16. SKIRTING
u 99
NOVORODAPIE® REHABIT • • Skirting of a modern design, manufactured in matt silver anodised aluminium, especially designed for building rehabilitation or renovation. • It can be installed in two different ways: over pre-existing skirting board, saving time and installation costs, or onto the wall itself using the profiles for placement (2 meters length). • Available in 2 heights: 80 and 120 mm (3.15” and 4.72”). • Profiles supplied in standard lengths of 2 m (78.7”). • Supplied with protective film on the visible face. • For a perfect finish or installation, finishing covers for left and right and interior and exterior corners are available.
Novorodapie® Rehabit HEIGHT (a)
WIDTH (h)
80 mm (3.15”)
12 mm (0.47”)
120 mm (4.72”)
20 mm (0.79”)
PACKAGING
FINISH
10 units
Anodised matt silver
REFERENCE NRHAL80PL NRHAL120PL
Complementary pieces:
profile for placement
external angle
internal angle
covers
NOVORODAPIE® L • • Skirting manufactured matt silver anodised aluminium, easily installed thanks to its auto-adhesive strips. • Original, lasting finish. • Its lower lip allows it to mask the perimeter joint, allowing pavement expansion. • Available in 3 heights: 60, 80 and 100 mm (2.36”, 3.15” and 3.94”). • Profiles supplied in standard lengths of 3 m (118”).
Novorodapie® L
HEIGHT (a)
WIDTH (h)
60 mm (2.36”)
15 mm (0.59”)
80 mm (3.15”)
15 mm (0.59”)
100 mm (3.94”)
15 mm (0.59”)
PACKAGING
FINISH
REFERENCE NRLAL60PL3AD
10 units
Anodised matt silver
NRLAL80PL3AD NRLAL100PL3A
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
100
www.emac.es
COLOCACIÓN ® NOVORODAPIE FLEX • Skirting manufactured in flexible PVC. • Attachment using contact cement (follow instructions in the technical file). • Available in 3 colours: white, beige and grey. • Available in 2 heights: 60 and 80 mm (2.36” and 3.15”). • Supplied in indivisible 25-m rolls.
Novorodapie® Flex
HEIGHT (a)
WIDTH (h)
PACKAGING
COLOURS White
NRFPV60BL
60 mm (2.36”)
14 mm (0.55”)
25-m roll.
Beige
NRFPV60BE
Grey
NRFPV60GR
80 mm (3.15”)
14 mm (0.55”)
25-m roll.
REFERENCE
White
NRFPV80BL
Beige
NRFPV80BE
Grey
NRFPV80GR
COLOCACIÓN NOVORODAPIE® SEMIFLEX • Skirting manufactured in semi-rigid, flexible PVC. • It adapts to the irregularities of paving. Thanks to its flexibility, it can also be installed in a curve.
• It incorporates beading scotia along its lower edge to aid
cleaning, which makes it ideal for buildings with high demands in hygiene such as hospitals, schools, shopping centres, etc. • Attachment using contact cement (follow instructions in the technical file). • Available in white. • Profiles supplied in standard lengths of 2.5 m (98.4”).
Novorodapie® Semiflex
www.emac.es
HEIGHT (a)
WIDTH (h)
PACKAGING
COLOUR
REFERENCE
100 mm (3.94”)
15 mm (0.59”)
25 units.
White
NRSFPV100BL
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
101
102
17. STEP FINISHES
u 103
NOVOPELDAÑO® 5 • • Matt silver anodised aluminium profile, designed for the edging on steps. • It has a grooved, anti-slip surface. • It is attached easily to any type of paving and is ideal for the finishing of deteriorated tile steps as it covers any imperfections. • Inalterable on the outside. • Profiles supplied in standard lengths of 1 m or 2.5 m (39.4” or 98.4”). • When ordered, it can be supplied with adhesive or with countersunk holes for screw attachment.
Novopeldaño® 5
WIDTH (a)
HEIGHT (h)
PACKAGING
42 mm (1.65”)
22 mm (0.87”)
20 units
PROFILE LENGTH
REFERENCE
100 cm (39.4”)
NP5AL42PL1
250 cm (98.4”)
NP5AL42PL
NOVOPELDAÑO® SAFETY • • An aluminium profile finished in matt silver that offers maximum
slip resistance thanks to its ridged surface and, above all, to its non-slip, 3-cm wide band. • It is attached easily to any type of paving and is ideal for the finishing of deteriorated tile steps as it covers any imperfections. • This is the ideal solution on steps in public places with dense traffic, both inside and outside. • The anti-slip strip, of aluminium oxide, has a certified anti-slip rating of R13 according to standard DIN51130. • The contrast between the profile and the strip furthermore guarantee its suitability within the guidelines offered in accessibility guides. • Profiles supplied in standard lengths of 1 m or 2.5 m (39.4” or 98.4”). • Supplied with protective film on the visible face.
WIDTH (a)
STRIP WIDTH (AD)
HEIGHT (h)
65 mm (2.56”)
30 mm (1.18”)
40 mm (1.57”)
PACKAGING
10 units
PROFILE LENGTH
REFERENCE
100 cm (39.4”)
NPSFAL65PL1
250 cm (98.4”)
NPSFAL65PL25
Novopeldaño® Safety
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
104
www.emac.es
® NOVOPELDAÑOCOLOCACIÓN LUMINA • Aluminium profiles with a ridged, non-slip surface plus a high-quality photoluminescent band which glows in the dark. • They with the strictest standards in the area of emergency signalling. In fact, the photoluminescent strip (Class B) amply surpasses the demands in terms of luminescence set by standard UNE 23035-4. • It is attached easily to any type of paving and is ideal for the finishing of deteriorated tile steps as it covers any imperfections. • This is the ideal solution on steps in public places with dense traffic, both inside and outside. It has high resistance to wear. • Available in 2 sizes of profile and photoluminescent band. • The large model, with a photoluminescent strip 3 cm (1.18”) wide, can be attached to indicate the tread or riser depending on whether the evacuation direction is up or down. • Profiles supplied in standard lengths of 1 m or 2.5 m (39.4” or 98.4”). • Supplied with protective film on the visible face.
Novorodapie® Lúmina Fitting on risers
Lúmina 48 mm
Lúmina 65 mm
WIDTH (a)
STRIP WIDTH (F)
HEIGHT (h)
PACKAGING
48 mm (1.89”)
5 mm (0.2”)
25 mm (0.98”)
15 units
65 mm (2.56”)
30 mm (1.18”)
www.emac.es
40 mm (1.57”)
10 units
PROFILE LENGTH
REFERENCE
100 cm (39.4”)
NPLUAL48PL1
250 cm (98.4”)
NPLUAL48PL25
100 cm (39.4”)
NPLUAL65PL1
250 cm (98.4”)
NPLUAL65PL25
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
105
106
18. ENTRANCE MATS
u 107
warranty 5 years
ENTRANCE MATS
• Emac® entrance mats are an effective barrier against allowing the entry of dust, dampness and dirt, providing the maximum protection and durability to paving. • They have been especially designed to avoid the entry of earth and to limit its propagation on the ground of any type of public building: airports, hospitals, hotels, offices, shopping centres, shops, leisure centres, etc. • They are guaranteed for traffic of over 50,000 people per day. • They are made to measure at the desired size and even in customised shapes. • They consist of anodised aluminium profiles, connected together with elements of insulating synthetic, anti-slip material, on top of which the inserts for the traffic zone are placed. These can be siccant or abrasive. • They allow commercial traffic and conform to standards on accessibility for people with reduced mobility.
5 profile heights: • The greater the height, the greater the capacity to accumulate dirt. • The total height of the carpet is the sum of the profile height + 4 mm (0.16”) height of the covering.
5 types of covering: EXTERIOR:
INTERIOR:
• Brush: available in grey and black. • Rubber: black.
• Soft Carpet: woven of 100% polyamide strands with great absorbent power (dampness retention of 3.5 l/m2). Fire classification at Cfl-s2. Available in 5 plain colours: anthracite, grey, red, blue and brown. • Rep Carpet: woven of polypropylene fibre, it has excellent scraping properties. Fire classification at Cfl-s1. Available in 4 colours: anthracite, grey, red and tobacco. • Abrasive-siccant carpet: drying and scraping qualities, highly elegant. Available in 3 colours: anthracite, grey and brown.
u Rubber
Brush
u
u
Soft Carpet
anthracite
grey
blue
red
anthracite
grey
red
tobacco
brown
anthracite
grey
brown
u Red Carpet black
black
u grey
Abrasive-siccant carpet
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793•info@emac-america.com
108
www.emac.es
Types of assembly: Depending on the join type of the structure, we distinguish between: • Closed structure: profiles joined at the base by strips of synthetic rubber, so that dirt is accumulated between the profiles to be cleaned with a vacuum cleaner. In the case of the 7.5 mm (0.29”) model, the mat is formed by aluminium profiles stuck to a continuous PVC sheet. • Open (cable) structure: profiles joined by steel cable, so that dirt accumulates in the dirt trough below. To clean, the mat is rolled up to access the trough. This type of structure is not available in the model 7.5 mm (0.29”) high.
CLOSED STRUCTURE
OPEN (CABLE) STRUCTURE
Types of installation: INSTALLATION IN A TROUGH
INSTALLATION ON THE SURFACE
• Installation in a trough, with or without a border frame.
• Installation on the surface, on paving installed using a ramp frame (only 7.5 mm / 0.29” and 13 mm / 0.51” models).
REVERSIBLE TROUGH FRAMES
COVERING FINISH
PROFILE 7.5 mm (0.29”) Closed
ADHESIVE RAMP FRAMES
PROFILE 10 mm (0.39”) Closed
Open
PROFILE 13 mm (0.51”) Closed
Open
PROFILE 17 mm (0.67”) Closed
Open
PROFILE 22 mm (0.87”) Closed
Open
Soft Carpet
NFMS7C*
NFMS10C*
NFMS10A*
NFMS13C*
NFMS13A*
NFMS17C*
NFMS17A*
NFMS22C*
NFMS22A*
Rep Carpet
NFMR7C*
NFMR10C*
NFMR10A*
NFMR13C*
NFMR13A*
NFMR17C*
NFMR17A*
NFMR22C*
NFMR22A*
Abrasive-Siccant Carpet
NFMA7C*
NFMA10C*
NFMA10A*
NFMA13C*
NFMA13A*
NFMA17C*
NFMA17A*
NFMA22C*
NFMA22A*
Brush
NFCE7C*
NFCE10C*
NFCE10A*
NFCE13C*
NFCE13A*
NFCE17C*
NFCE17A*
NFCE22C*
NFCE22A*
Rubber
NFCA7C*
NFCA10C*
NFCA10A*
NFCA13C*
NFCA13A*
NFCA17C*
NFCA17A*
NFCA22C*
NFCA22A*
*Indicate colour of carpet or brush.
Joint plate for mats: Galvanised steel plate to facilitate the joining of different matting modules.
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
109
HOW TO REQUEST AN EMAC® ENTRANCE MAT: OPTION
SPECIFYING TROUGH DIMENSIONS
A
• Give the interior measurements of the dirt trough (width A x depth B). • State whether it should be supplied with or without a frame. • Indicate the direction of traffic. • If the trough is not perfectly square or rectangular, it is essential to indicate the diagonals. We will calculate the mm (inches) of expansion.
B
A
SPECIFYING MAT DIMENSIONS
OPTION
B
• Give the dimensions (width A x depth B). The mat will be manufactured to the exact dimensions. • Indicate the direction of traffic.
B
The maximum length is 4 m (157.4”). For larger sizes, mats are made in several pieces. We recommend you do not request the join in the central portion as this is the area of greatest traffic. It is better to leave the joins at the sides.
Module 1
RECOMMENDED:
Module 2
A
Module 3
entry
NOT RECOMMENDED
Module 1
Module 2
Module 1
Module 2
Module 3
entry entry
Formula for estimating the price of mats with special shapes: B
B
a
a
B a
B
a
B a
B
B a
Calculation= A+B+10%
Calculation=A+20%
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793•info@emac-america.com
110
www.emac.es
19. OTHER EXCLUSIVE SOLUTIONS This catalogue includes all our expansion joints and profiles for works, but at Emac速 we have many more solutions for finishing and decorating all types of paving and ceramic cladding. Visit www.emac.es/en to view our range.
u 111
Here you have a small selection Novopeldaño® MaxiKenya
A step finish manufactured in our exclusive MAXI material, of vegetable fibres. Its grooved surface increases slip resistance (Rd) on any paving, helping you comply with the strictest regulations. It is ideal for installing in exteriors, even as swimming pool surrounds.
Maxi profiles
Our range of MAXI products, using vegetable fibres, includes profiles for protecting corners, separating pavements, decorative listels, skirting and expansion joints.
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
112
www.emac.es
of other Emac® products Novonivel® Forte
A transition profile to avoid level differences, with a broad, grooved, anti-slip surface and reinforced support base for greater load resistance. Also available with a photoluminescent strip (Class B) to comply with emergency signalling.
Novovierteaguas GT
Flashing board of a wide exposed face, manufactured in lacquered aluminium, ideal for finishing the border of terraces, balconies and sills. The exclusive design of its throating, grooved along its length, makes it much more effective for channelling water away from the wall, thereby stopping water from falling down the façade and causing leaks.
www.emac.es
EMAC COMPLEMENTOS, S.L.• Avda. Madrid 6 • 46930 Quart de Poblet, Valencia, Spain • Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 • info@emac.es EMAC ITALIA S.R.L • Via Emilia-Romagna 104 • 41049 Sassuolo (Mo), Italia • Tel.: (+39) 0536994854 - Fax:(+39) 0536889025 • info@emac-italia.it EMAC AMERICA, L.L.C. • 1970 NW 129 Avenue, Unit # 103 • Miami, FL 33182 • Phone: # (305) 406 1593 - Fax: (305) 406 1793• info@emac-america.com
113
R+D+i EmacŽ has its own R&D team that designs, develops and improves profiles and expansion joints for the sole purpose of satisfying our customers’ needs. The EmacŽ R&D department is made up of professionals with extensive experience and excellent technical skills who are constantly learning and fully committed to the project. The team, backed by significant investment and collaboration with groundbreaking technology institutes, is able to provide technically competitive products of high quality. The importance of this department is growing exponentially and a new laboratory has therefore been built for it within the Emac Complementos extensive facilities. This is a research and development center designed to perform various tests, studies, inspections, analyses, technological monitoring and even prototypes in our own Rapid Prototyping machine. Our work in research, development and innovation can be seen in over 550 patents and more than 30 proprietary names and brands by which our most popular product ranges are known. All of this is done in order to protect our products and the value of our brand, which is deeply rooted in the market.
Rapid Prototyping machine.
114
Corporate Social Responsability Emac庐 social programmes ensure decent homes in India, more than 500 meals in Valencia, laughs and distraction for children in many hospitals, and permanent support for disabled people in our own community. We work for a better world.
Fundaci贸n Vicente Ferrer
Casa de la Caridad, Cruz Roja, Improasistencia...
115
Emac® is a leading company in profiles and trims for wall and floor tiles, and expansion joint solutions for large projects. We offer more than 3.000 references in stock and excellent service, with solutions for floors, walls, facades and urban pavements. We are present in over 110 countries with subsidiaries in USA and Italy.
PROJECTS
In the last 20 years, hundreds of projects worldwide have chosen our profiles for resolving their structural joint challenges. We present a few of them here. Dublin Airport (Ireland), United Nations Communications Centre in Valencia (Spain), Algarve Race Circuit (Portugal), King Juan Carlos I University in Madrid (Spain), Guatemala International Airport, Ikea shopping center in A Coruña (Spain), Public Parking “Serrano Street” in Madrid (Spain), Jumeirah Beach Residence in Dubai (United Arab Emirates), kitchens of University Hospital of Getafe (Spain), Ágora Building in City of Arts and Sciences of Valencia (Spain).
Emac Complementos, S.L. Avda. Madrid 6, Apdo. Postal 46 46930 Quart de Poblet, Valencia, Spain Tel.: (+34) 961 532 200 - Fax: (+34) 961 532 261 Email: info@emac.es
Emac America, L.L.C. 1970 NW 129 Avenue, Unit # 103 Miami, FL 33182 Phone: # (305) 406 1593 - Fax: (305) 406 1793 Email: info@emac-america.com
Emac Italia S.R.L.
CATNJP11ENG
Via Emilia-Romagna 104 41049 Sassuolo (Mo), Italy Tel.: (+39) 0536994854 - Fax: (+39) 0536889025 Email: info@emac-italia.it