Outdoor catalog 2014

Page 1

OUTDOOR CATALOG

Edition 1


Index

ARTEMIDE OUTDOOR COLLECTION

TYPOLOGY FAMILIES OVERVIEW

2 4 8

ARIA MINI 10 CALUMET 12 CAPSULE 16 CEFISO 18 CHILONE 24 CICLOPE 30 CUNEO 38 DIOSCURI 40 EFFETTO 44 EPULO 52 ERACLEA 58 FALANGE 60 GIASOLE 64 HILA 68 IPPOLITO 72 LINEALED DRIVE-OVER 74 MINISPOT 76 MOLLA 78 NAIADE DRIVE-OVER 80 NAIADE DOWNLIGHT 86 NIKI 92 NUDA 96 ORCAMO WALK-OVER 102 ORCAMO DOWNLIGHT 106 PANTAREI 110 REEDS 118 SPIKE 122 TOLOMEO XXL 126 GENERAL TERMINOLOGY 132 CODE INDEX 134


Typology

WALK-OVER RECESSED

ORCAMO P.102

ARTEMIDE OUTDOOR COLLECTION

DRIVE-OVER RECESSED

LINEALED P.74

NAIADE P.80

LINEAR

SPIKE P.122

FLOOR BOLLARD

CHILONE P.24

NUDA P.96

CEFISO P.18

CICLOPE P.30

REEDS P.118

EPULO P.52

CUNEO P.38

TOLOMEO XXL P.126

FALANGE P.60

ERACLEA P.58

GIASOLE P.64

HILA P.68

IPPOLITO P.72

2

SPOTLIGHT

MINISPOT P.76


Typology

POLE

CHILONE P.24

ARTEMIDE OUTDOOR COLLECTION

WALL MOUNTED

WALL EFFECT

CEILING MOUNTED

DOWNLIGHT RECESSED

ARIA MINI P.10

GIASOLE P.64

EFFETTO P.44

CAPSULE P.16

NAIADE P.80

CALUMET P.12

HILA P.68

MOLLA P.78

CALUMET P.12

ORCAMO P.102

CHILONE P.24

NIKI P.92

DIOSCURI P.40

CICLOPE P.30

PANTAREI P.110

GIASOLE P.64

CUNEO P.38

NIKI P.92

DIOSCURI P.40

PANTAREI P.110

3


Families

ARTEMIDE OUTDOOR COLLECTION

ARIA MINI P.10

ARIA MINI P.10

CHILONE P.24

CHILONE WALL P.27

CHILONE 45 FLOOR P.27

CHILONE UP FLOOR P.27

CHILONE 90 FLOOR P.27

CHILONE POLE P.29

CALUMET P.12

CALUMET WALL P.12

CALUMET CEILING P.14

CICLOPE P.30

CAPSULE P.16

CICLOPE WALL P.33

CICLOPE 50 BILATERAL FLOOR P.35

CICLOPE 50 UNILATERAL FLOOR P.35

CICLOPE 90 UNILATERAL FLOOR P.37

CICLOPE 90 BILATERAL FLOOR P.37

CAPSULE 45 CEILING P.16

CEFISO P.18

CUNEO P.38 CEFISO 14 WALL/CEILING/FLOOR P.23

CEFISO 20 WALL/CEILING/FLOOR P.23

CUNEO WALL/FLOOR P.39

DIOSCURI P.40

DIOSCURI WALL/CEILING P.43

4


Families

ARTEMIDE OUTDOOR COLLECTION

EFFETTO P.44

EPULO P.52

EFFETTO SQUARE 1 NARROW BEAM WALL P.47

EPULO 13 WALL/CEILING/FLOOR P.54

EFFETTO SQUARE 1 LARGE BEAM WALL P.47

EPULO 18 WALL/CEILING/FLOOR P.55

ERACLEA P.58

EFFETTO SQUARE 2 NARROW BEAMS WALL P.47

EFFETTO SQUARE 2 LARGE BEAMS WALL P.49

EFFETTO SQUARE 1 NARROW/1 LARGE BEAMS WALL P.49

ERACLEA FLOOR P.59

FALANGE P.60

EFFETTO SQUARE 4 NARROW BEAMS WALL P.49

EFFETTO SQUARE 4 LARGE BEAMS WALL P.49 FALANGE 9 WALL/CEILING/FLOOR P.62

FALANGE 18 WALL/CEILING/FLOOR P.63

GIASOLE P.64 EFFETTO ROUND 1 NARROW BEAM WALL P.50

EFFETTO ROUND 1 LARGE BEAM WALL P.50

GIASOLE WALL/CEILING P.66

EFFETTO ROUND 2 NARROW BEAMS WALL P.50

EFFETTO ROUND 2 LARGE BEAMS WALL P.51

EFFETTO ROUND 1 NARROW/1 LARGE BEAMS WALL P.51

HILA P.68

HILA WALL P.71 EFFETTO ROUND 4 NARROW BEAMS WALL P.51

GIASOLE UNILATERAL FLOOR P.67

HILA FLOOR P.71

EFFETTO ROUND 4 LARGE BEAMS WALL P.51

5


Families

ARTEMIDE OUTDOOR COLLECTION

IPPOLITO P.72

NAIADE DRIVE-OVER P.80

IPPOLITO 45 FLOOR P.73

NAIADE 55 DRIVE-OVER ROUND FLOOR P.83

NAIADE 90 DRIVE-OVER ROUND FLOOR P.84

NAIADE 150 DRIVE-OVER ROUND FLOOR P.85

NAIADE 55 DRIVE-OVER SQUARE FLOOR P.83

NAIADE 90 DRIVE-OVER SQUARE FLOOR P.84

NAIADE 150 DRIVE-OVER SQUARE FLOOR P.85

IPPOLITO 90 FLOOR P.73

LINEALED P.74

LINEALED DRIVE-OVER FLOOR P.75

MINISPOT P.76

MINISPOT WALL/FLOOR P.77

NAIADE DOWNLIGHT P.86

NAIADE 55 DOWNLIGHT ROUND CEILING P.89

NAIADE 90 DOWNLIGHT ROUND CEILING P.90

NAIADE 150 DOWNLIGHT ROUND CEILING P.91

NAIADE 55 DOWNLIGHT SQUARE CEILING P.89

NAIADE 90 DOWNLIGHT SQUARE CEILING P.90

NAIADE 150 DOWNLIGHT SQUARE CEILING P.91

MOLLA P.78

MOLLA WALL P.79

NIKI P.92

NIKI WALL/CEILING P.93

6


Families

ARTEMIDE OUTDOOR COLLECTION

NUDA P.96

REEDS P.118

NUDA 50 UNILATERAL FLOOR P.98

NUDA 100 UNILATERAL FLOOR P.99

REEDS IP67 P.119

REEDS IP68 P.121

NUDA 50 BILATERAL FLOOR P.98

NUDA 100 BILATERAL FLOOR P.99

REEDS IP67 TRIPLE P.119

REEDS IP68 TRIPLE P.121

SPIKE P.122

ORCAMO WALK-OVER P.102

ORCAMO 150 WALK-OVER ROUND FLOOR P.105

SPIKE WALL/CEILING/FLOOR P.125

ORCAMO 150 WALK-OVER SQUARE FLOOR P.105

TOLOMEO XXL P.126

ORCAMO DOWNLIGHT P.106

ORCAMO 150 DOWNLIGHT ROUND CEILING P.108

TOLOMEO XXL WITH BASE FLOOR P.129

ORCAMO 150 DOWNLIGHT SQUARE CEILING P.109

TOLOMEO XXL WITH FIXED SUPPORT FLOOR P.129

PANTAREI P.110

PANTAREI 190 WALL/CEILING P.113

PANTAREI 3 00 WALL/CEILING P.114

PANTAREI 390 WALL/CEILING P.117

7


Overview

ARTEMIDE OUTDOOR COLLECTION

ARTEMIDE, PROTAGONIST OF THE OUTDOOR RESIDENTIAL SEGMENT Artemide North America ranks as one of the world’s most prestigious contemporary lighting ­manufacturers. Known for the philosophy The Human Light which places men and the pursuit of their well-being at the core of research and d ­ evelopment, Artemide has always been a synonym for Design, I­nnovation and Made in Italy. Founded in 1959 by Ernesto Gismondi in Milan, Artemide offers a wide selection of residential and contract lighting options that meet the needs of all lifestyles. Artemide ­operates throughout the world with production ­factories in Italy, France and Central Europe. The research and development team aims at developing the l­atest in LED technologies and lighting engineering for both indoor and outdoor applications. Artemide introduces luminaires that are­­ ­considered on an international level as design icons, exhibited in museums of modern art and design across the world. This is the first Artemide Outdoor Catalog, An as­sortment of products for the outdoor light design projects, based on years of research and development. Great attention is devoted to the usage of innovative and eco-friendly m ­ aterials.

SERVICE Artemide develops lighting solutions that ­integrate architectural and living spaces, always with a keen eye on sustainability, sharing expertise and k­ nowledge with architects and lighting planners. The Artemide Outdoor collection is suitable for ­different ­applications: • scenic lighting for enhancing facades and ­architectural elements; • functional

lighting of paths, bikeways, parks;

• social space lighting for urban landscapes, squares

and ­gathering places; • environmental

lighting, respecting the nature of parks and ­gardens;

• indoor

lighting in places where water requires f­ixtures with high IP value, such as wellness ­centres and swimming pools.

With its 55 Lighting Consultancy Centres w ­ orldwide, Artemide offers c­ustomers a complete service to s­upport lighting engineering plans, k­ eeping a ­constant dialogue with its partners. 2D, 3D and IES files are available upon request, together with all the technical i­nformation ­necessary to implement your own independent lighting ­engineering project. Our technical team is available to help you in your lighting projects.

MANUFACTURING The care for sustainability of Artemide – a Company certified ISO 9001:2008, ISO 17025 and WMT – is ensured both by its French plant Megalit, accredited with ISO 14001 and i­mplementing the Carbon Footprint, and by its focus on product lifecycle (LCA), i.e. design, choice of raw materials, processing to minimize t­ ransportation, and down to assembly, packaging, and disposal. The improvement of the light fixture efficiency during use involves ­energy-saving, reliability and lastingness of the implemented t­echnical ­solutions with a consequent reduction of CO2 emissions. All Artemide light fixtures comply with European Directives and Standards and bear CE mark. LCA (Life Cycle Assessment) LCA is a strategic approach used to assess the p ­ otential ­environment impact that a product has during all the stages of its life cycle: selection of raw m ­ aterials, ­processing, transport and assembly, ­packaging, d ­ istribution, use phase, disposal and ­recycling.

8


Overview

ARTEMIDE OUTDOOR COLLECTION

LED TECHNOLOGY With a wide experience in using LEDs for indoor light fixtures, Artemide uses LED technological ­innovation also for outdoor light fixtures. Economic and ­environmental advantages ­deriving from using LEDs are : • high • low

light efficiency

consumption

• reduced • very • use

CO2 emissions

limited use of raw material of non-toxic and non-harmful materials

• reduced

size and weight which ensures great s­avings for ­transport and ­logistics

• use

of components that can be easily ­disassembled and recycled

• use

in safety low voltage

• very

long operation time

• short

maintenance cycles

• excellent

shock and vibration resistance

Artemide’s expertise in the field of LED lighting fixtures focuses on some points which are absolutely necessary for a correct and ­long-lasting use of this t­ echnology: • The

accurate selection of latest generation LEDs

• The

design of heat dissipation systems

• The

use of advanced electronic components

• The

development of excellent optical systems

OUTDOOR MATERIALS AND FINISHES The Outdoor fixture design process includes accurate ­material and technology selection so that fixtures meet all the t­echnical, a­ esthetic and functional requirements. All Artemide products have undergone the following tests: • Saline

fog tests to evaluate corrosion resistance;

• UV

radiation exposure tests to evaluate their behavior when exposed to sunlight;

• IP

tests to evaluate the fixture waterproofing;

• IK

tests to evaluate shock resistance;

• Load

tests for walk-over and drive-over built-in fixtures.

PAINTING PROCESS

Heat dissipation LEDs on printed circuit

LEDs and lenses

The painting process is very important. The surface­­treatment of an outdoor lighting fixture exposed to extreme ­atmospheric agents and diverse weather conditions must ensure a suitable level of protection against the aggressive action of acid rains, saline e­ nvironments, humidity and UV radiations. With its own internal painting plant, the surface treatment of the Artemide ­outdoor range is in full c­ ompliance with RoHS RAEE standards and q ­ ualitative conditions are constantly observed. The painting plant cycle is provided with a pre-treatment ­tunnel that includes 6 stages of iron phosphate treatment and a rinse ­process together with a nanotechnological spray passivation ­process, consisting in the deposit of diamond structured molecules. This is useful to prepare the fixture for the application of the anti-corrosion epoxy powder primer through an electrostatic application system with dedicated spray cabins. Once the polymerization has been completed through the dry oven, the powder paint finish with a ­polyester- free base is applied. This application is carried out after the dry oven and reticulation at 190°C (374°F).

9


WALL

Aria mini design by Massimo Sacconi

LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. • WALL

INSTALLATION

• AVAILABLE • BODY

IN 2 FINISHES: PAINTED WHITE OR GREY

IN INJECTION MOLDED ALUMINUM

• FRAME

IN ALUMINUM

• METALIZED

PROLYCARBONATE REFLECTOR

• PROTECTION

10

SCREEN IN TEMPERED GLASS, 1/8”(3mm)-THICK

• WHITE

MONOCHROMATIC LEDs

• SILICONE

GASKET

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• 24V

DC SUPPLY REQUIRED (REMOTE DRIVER SOLD SEPARATELY)


Aria mini

WALL 1 15/16” 4,8 cm

3 15/16” 10 cm

2 13/16” x 3 1/8”± 1/16” 7,2 cm x 8 cm ± 2mm

Aria mini lamping

power consumption lumens

CCT

CRI

NL31013VTK002UL

1 LED

4W

252lm

3000K

80

white

NL31013VTK006UL

1 LED

4W

252lm

3000K

80

grey

code

IP65

finish

Aria mini Spot

For complete fixture, please order body(ies) + corresponding driver(s)

Remote driver NLA010005

2 - 4 lights

NLA010006

1 light

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

11


WALL

Calumet design by Ernesto Gismondi

LIGHTING SYSTEM WITH SINGLE OR DOUBLE EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. LENSES OPTIMIZE EMITTANCE AND DETERMINE BEAM SPREAD. CALUMET WALL • AVAILABLE

IN 2 SIZES: Ø 3 1/8” (8 cm) OR Ø 5 1/8” (13 cm)

• WHITE

• SINGLE

• ALL

OR DOUBLE EMISSION

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002) OR ANTHRACITE GREY

• CYLINDRICAL • OPTICAL

LIGHTING BODY IN EN AW-6060 ALUMINUM

• DIFFUSER • WALL

BODY IN EN AW-6060 ALUMINUM

IN REINFORCED GLASS

FIXING BRACKET IN BENT STEEL

• WATER

TIGHT SILICONE GASKETS

• PMMA

LENSES WITH NARROW BEAM (8.5° AND 9°)

• DIRECTION

OF LIGHT BEAM CAN BE ADJUSTED TO OBTAIN DESIRED LIGHTING EFFECT ON WALL

12

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES: WARM=3000K / NEUTRAL=4000K FIXING DOWELS AND SCREWS USED OUTSIDE THE FIXTURE ARE IN AISI 304 STAINLESS STEEL

• THE

COMPONENTS IN DIE-CAST ALUMINUM AND THE STEEL BRACKET FOR WALL FIXING ARE PAINTED BY MEANS OF 3-STAGE OUTDOOR TREATMENT: NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Calumet

wall

9 7/8” 25 cm 4 9/16” 11,6 cm

Calumet 8 WALL

ø 3 1/8” 4 7/8” ø 8 cm 12,4 cm

code

IP65

lamping

power ­consumption lumens

CCT

CRI

beam

finish

Single emission

Cd/klm ØC0 H m m

Ø C90 m

E lux

1372

5,0

0,68

0,68

219

2744

4,0

0,55

0,55

342

3,0

0,41

0,41

608

2,0

0,27

0,27

1368

1,0

0,14

0,14

5473

-90°

T41911NW08

3 LED

4W

185lm 3000K 85

8.5°

grey white

T41911NW18

3 LED

4W

185lm 3000K 85

8.5°

anth. grey

T41911NN08

3 LED

4W

253lm 4000K 70

8.5°

grey white

T41911NN18

3 LED

4W

253lm 4000K 70

8.5°

anth. grey

90°

Spot

4116 5488

Electronic driver integrated 3000K

cd

Double emission T41922NW08

6 LED

7.5W

369lm 3000K 85

2x8.5°

grey white

T41922NW18

6 LED

7.5W

369lm 3000K 85

2x8.5°

anth. grey

T41922NN08

6 LED

7.5W

506lm 4000K 70

2x8.5°

grey white

T41922NN18

6 LED

7.5W

506lm 4000K 70

2x8.5°

anth. grey

Double emission Spot

-90°

1372

90°

2744 4116 5488

Electronic driver integrated 3000K

8.5 º

Cd/klm ØC0 H m m

Ø C90 m

E lux

5,0

0,68

0,68

219

4,0

0,55

0,55

342

3,0

0,41

0,41

608

2,0

0,27

0,27

1368

1,0

0,14

0,14

5473

cd

8.5 º

13 3/4” 35 cm 4 9/16” 11,6 cm

Calumet 13 WALL

ø 5 1/8” ø 13 cm

code

IP65

lamping

power c­onsumption lumens

CCT

CRI

beam

6 13/16” 17,3 cm

finish

Single emission

Cd/klm ØC0 H m m

Ø C90 m

E lux

2198

5,0

0,84

0,84

352

4396

4,0

0,67

0,67

549

3,0

0,50

0,50

977

2,0

0,34

0,34

2197

1,0

0,17

0,17

8790

-90°

T41941NW08

4 LED

7.5W

348lm 3000K 85

grey white

T41941NW18

4 LED

7.5W

348lm 3000K 85

anth. grey

T41941NN08

4 LED

7.5W

372lm 4000K 70

grey white

T41941NN18

4 LED

7.5W

372lm 4000K 70

anth. grey

90°

Spot

6594 8792

Electronic driver integrated 3000K

cd

Double emission T41952NW08

8 LED

15W

696lm 3000K 85

2x9°

grey white

T41952NW18

8 LED

15W

696lm 3000K 85

2x9°

anth. grey

T41952NN08

8 LED

15W

744lm 4000K 70

2x9°

grey white

T41952NN18

8 LED

15W

744lm 4000K 70

2x9°

anth. grey

Double emission Spot

-90°

2198 4696

90°

6594 8792

Electronic driver integrated 3000K

cd

9 º

Cd/klm ØC0 H m m

Ø C90 m

E lux

5,0

0,84

0,84

352

4,0

0,67

0,67

549

3,0

0,50

0,50

977

2,0

0,34

0,34

2197

1,0

0,17

0,17

8790 9º

13


CEILING

CALUMET CEILING • AVAILABLE

IN 2 SIZES: Ø 3 1/8” (8 cm) OR Ø 5 1/8” (13 cm)

• WHITE

• AVAILABLE

• ALL

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002) OR ANTHRACITE GREY

• CYLINDRICAL • OPTICAL

BODY IN EN AW-6060 ALUMINUM

LIGHTING BODY IN EN AW-6060 ALUMINUM

• DIFFUSER

IN REINFORCED GLASS

• WATER

TIGHT SILICONE GASKETS

• PMMA

LENSES WITH WIDE BEAM (24° AND 32°)

• DIRECTION

OF LIGHT BEAM CAN BE ADJUSTED TO OBTAIN DESIRED LIGHTING EFFECT FROM CEILING

14

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES: WARM=3000K / NEUTRAL=4000K FIXING DOWELS AND SCREWS USED OUTSIDE THE FIXTURE ARE IN AISI 304 STAINLESS STEEL

• DIE-CAST

ALUMINUM COMPONENTS ARE PAINTED WITH 3-STAGE OUTDOOR TREATMENT: NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Calumet

CEILING 4 9/16” 11,6 cm 7” 17,8 cm

Calumet 8 CEILING

IP65

ø 3 1/8” ø 8 cm

code

lamping

power c­onsumption lumens

T41931LW08

3 LED

4W

189lm 3000K 85

24°

grey white

T41931LW18

3 LED

4W

189lm 3000K 85

24°

anth. grey

T41931LN08

3 LED

4W

260lm 4000K 70

24°

grey white

T41931LN18

3 LED

4W

260lm 4000K 70

24°

anth. grey

CCT

CRI

beam

finish -90°

Cd/klm ØC0 H m m

90°

E lux

206

1,0

0,44

0,44

822

411

2,0

0,89

0,89

206

1,33

1,33

1,77

1,77

2,22

2,22

Flood

3,0

617

Electronic driver integrated

Ø C90 m

4,0

822

5,0

3000K

cd

91 51 33 24º

9” 22,8 cm

Calumet 13 CEILING

IP65

ø 5 1/8” ø 13 cm

code

lamping

power c­onsumption lumens

T41961LW08

4 LED

7.5W

339lm 3000K 80

32°

grey white

T41961LW18

4 LED

7.5W

339lm 3000K 80

32°

anth. grey

T41961LN08

4 LED

7.5W

362lm 4000K 75

32°

grey white

T41961LN18

4 LED

7.5W

362lm 4000K 75

32°

anth. grey

CCT

CRI

beam

finish -90°

Cd/klm ØC0 H m m

90°

1,0

0,60

0,60

926

463

2,0

1,19

1,19

231

1,79

1,79

2,38

2,38

2,98

2,98

3,0

694

4,0

926 3000K

E lux

231 Flood

Electronic driver integrated

Ø C90 m

5,0 cd

103 58 37 32º

15


CEILING

Capsule design by Ross Lovegrove

CEILING MOUNTED LUMINAIRE FOR DIRECT DIFFUSED LIGHTING • CEILING

SUPPORT IN THERMOPLASTIC RESIN

• DIFFUSER

IN ACID-ETCHED BLOWN GLASS

• DIMMABLE • IP65

16

(USE DIMMABLE BULB)


Capsule

CEILING

13” 33 cm

ø 17 11/16” ø 45 cm

Capsule code

lamping

1604018A

E26/A19 LED,CFL,INC max 100W

finish

white glass Elliptical

17


WALL / CEILING / FLOOR

Cefiso design by Alessandro Pedretti (Studio Rota & Partners)

LIGHT FIXTURE WITH ADJUSTABLE DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. • FLOOR,

WALL AND SOFFIT/CEILING INSTALLATION

• AVAILABLE

IN 2 SIZES : CEFISO 14, CEFISO 20

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002) OR ANTHRACITE GREY

• COMPOSED

BY ADJUSTABLE LIGHTING UNIT AND TERMINAL BOARD. ROTATION ON THE BASE +/-180°, BODY TILTING +/-90° BY MEANS OF A GRADUATED METAL RING ALLOWING AN ACCURATE ADJUSTMENT. POSITIONING IS MAINTAINED BY MEANS OF LOCKING DOWELS

• BODY

AND TERMINAL BOARD IN EN AB44100 ALUMINUM, SILICONE GASKETS

• SILKSCREENED

TEMPERED GLASS SILICONED FLUSH WITH THE BODY TO AVOID BACKWATER

• GLASS

THICKNESS OF 0.2” (5mm) FOR CEFISO 14 AND 0.3” (8mm) FOR CEFISO 20

18

• PMMA

LENSES IN 3 DIFFERENT VERSIONS OF BEAMS: SPOT, FLOOD AND WALL WASHER

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

• SCREWS

IN AISI 316 STAINLESS STEEL

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Cefiso

WALL / ceiling / FLOOR

19


20

Service Centre of University Students, Trento (Italy) Project: Studio Palerm and Tabares de Nava s.L. Arquitectos + CLA SdS Engeneering, ing Luca Masini


Cefiso

WALL / ceiling / FLOOR

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

10째 optic

34째 optic

7째 x 48째 optic

21


22

Service Centre of University Students, Trento (Italy) Project: Studio Palerm and Tabares de Nava s.L. Arquitectos + CLA SdS Engeneering, ing Luca Masini


Cefiso

WALL / ceiling / FLOOR 1 5/8“ 4,2 cm

12 5/16” 31,3 cm 5 5/8” 13,6 cm

Cefiso 14 code

IP65 IK10

lamping

power consumption lumens

CCT

CRI

beam

finish

Spot beam

H m

ØC0 m

Ø C90 m

4841

0,5

0,09

0,09

77454

9682

1

0,19

0,19

19363

1,5

0,28

0,28

8606

2

0,37

0,37

4841

2,5

0,46

0,46

3098

3

0,56

0,56

2151

H m

ØC0 m

Ø C90 m

0,5

0,31

0,31

7781

1

0,62

0,62

1945

1,5

0,92

0,92

865

2

1,23

1,23

486

2,5

1,54

1,54

311

3

1,85

1,85

216

H m

ØC0 m

Ø C90 m

0,5

0,06

0,44

25358

1

0,13

0,89

6340

1,5

0,19

1,33

2818

2

0,26

1,77

1585

2,5

0,32

2,22

1014

3

0,39

2,66

-90°

T418010W08

9 LED

22W

954lm

3000K 80

10°

grey white

T418010W18

9 LED

22W

954lm

3000K 80

10°

anth. grey

T418010N08

9 LED

22W

1048lm 4000K 75

10°

grey white

T418010N18

9 LED

22W

1048lm 4000K 75

10°

anth. grey

Spot

90°

14523 -30°

Electronic driver integrated

19363

30°

3000K

Flood beam

cd

-90°

T418039W08

9 LED

22W

764lm

3000K 80

34°

grey white

T418039W18

9 LED

22W

764lm

3000K 80

34°

anth. grey

T418039N08

9 LED

22W

874lm

4000K 75

34°

grey white

T418039N18

9 LED

22W

874lm

4000K 75

34°

90° 487

Flood

974 1461

anth. grey

-30°

Electronic driver integrated

1948

30°

3000K

Elliptical wall washer beam T4180ELW08

9 LED

22W

830lm

3000K 80

7°x48°

grey white

T4180ELW18

9 LED

22W

830lm

3000K 80

7°x48°

anth. grey

T4180ELN08

9 LED

22W

950lm

4000K 75

7°x48°

grey white

T4180ELN18

9 LED

22W

950lm

4000K 75

7°x48°

90° 1609

Elliptical wall washer

3218 4826

anth. grey

-30°

Electronic driver integrated

10º

cd

-90°

6435

30°

3000K

E lux

E lux

34º

cd

E lux

704 7ºx48º

2 3/8” 6,1 cm

16 7/8” 43 cm 7 11/16” 19,5 cm

Cefiso 20 code

IP65 IK10

lamping

power consumption lumens

CCT

CRI

beam

finish

Spot beam

H m

Ø C0 m

Ø C90 m

8266

0,5

0,09

0,09

16532

1

0,19

0,19

33047

1,5

0,28

0,28

14687

2

0,37

0,37

8262

2,5

0,46

0,46

5287

3

0,56

0,56

3672

H m

ØC0 m

Ø C90 m

865

0,5

0,31

0,31

1730

1

0,62

0,62

3455

1,5

0,92

0,92

1536

2

1,23

1,23

864

2,5

1,54

1,54

553

3

1,85

1,85

384

H m

ØC0 m

Ø C90 m

2861

0,5

0,06

0,44

45095

5721

1

0,13

0,89

11274

1,5

0,19

1,33

5011

2

0,26

1,77

2818

2,5

0,32

2,22

1804

3

0,39

2,66

-90°

T418110W08

16 LED 37W

1637lm 3000K 80

10°

grey white

T418110W18

16 LED 37W

1637lm 3000K 80

10°

anth. grey

T418110N08

16 LED 37W

1873lm 4000K 75

10°

grey white

T418110N18

16 LED 37W

1873lm 4000K 75

10°

anth. grey

Spot

90°

24798 -30°

Electronic driver integrated

33064

30°

3000K

Flood beam

cd

-90°

T418139W08

16 LED 37W

1358lm 3000K 80

34°

grey white

T418139W18

16 LED 37W

1358lm 3000K 80

34°

anth. grey

T418139N08

16 LED 37W

1554lm 4000K 75

34°

grey white

T418139N18

16 LED 37W

1554lm 4000K 75

34°

anth. grey

Flood

90°

2595 -30°

Electronic driver integrated

3460

30°

3000K

Elliptical wall washer beam T4181ELW08

16 LED 37W

1477lm 3000K 80

7°x48°

grey white

T4181ELW18

16 LED 37W

1477lm 3000K 80

7°x48°

anth. grey

T4181ELN08

16 LED 37W

1689lm 4000K 75

7°x48°

grey white

T4181ELN18

16 LED 37W

1689lm 4000K 75

7°x48°

anth. grey

Electronic driver integrated

Elliptical wall washer

90°

8582 -30° 3000K

11442

30° cd

132187

10º

cd

-90°

E lux

E lux 13821

34º

E lux

1253 7ºx48º

23


WALL / FLOOR

Chilone design by Ernesto Gismondi

Chilone wall

SERIES OF LIGHT FIXTURES WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. CHILONE WALL • CAN

BE INSTALLED WITH THE LIGHT DIRECTED EITHER DOWNWARDS OR UPWARDS

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST • LAMP • UV

RESISTANT DIFFUSER IN SHOCK RESISTANT POLYCARBONATE WITH SATIN FINISH

• LAMP

SUPPORT IN EXTRUDED EN-AW-6060 ALUMINUM

• WALL

SUPPORT IN STEEL INCLUDED

• PAINTING

IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• PROVIDED

• AVAILABLE

WITH DOWNWARD EMISSION IN  17 11/16” (45 cm) AND 35 7/16” (90 cm) OR WITH UPWARD EMISSION

• AVAILABLE

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• ELECTRONIC

CHILONE FLOOR

DRIVER INTEGRATED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST • LAMP

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• UV

RESISTANT DIFFUSER IN SHOCK RESISTANT POLYCARBONATE WITH SATIN FINISH

• SUPPORT

POLE IN EXTRUDED EN-AW-6060 ALUMINUM, CHROMATE TREATED AND PAINTED

• MOUNTING

PLATE IN FOLDED, WELDED AND PAINTED STEEL, WITH HOLES FOR GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS; INCLUDED

• PAINTING

IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC • PROVIDED

DRIVER INTEGRATED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

24


Chilone pole

CHILONE POLE • AVAILABLE

WITH DOWNWARD EMISSION IN 98 7/16” (250 CM)

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST • LAMP

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• UV

RESISTANT DIFFUSER IN SHOCK RESISTANT POLYCARBONATE WITH SATIN FINISH

• IN-GROUND

SUPPORT POLE IN EXTRUDED EN-AW-6060 ALUMINUM INCLUDED. MUST BE INSTALLED BY MEANS OF A PROPER FOUNDATION PLINTH

• PAINTING

IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

Chilone 90

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED

• PROVIDED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

Chilone up

Chilone 45

25


Chilone

WALL / FLOOR

Chilone 45 FLOOR

Lighting application

LED 8W h

L

a

Em

Emax

Emin

0,45 m

1,0 m

3,0 m

35 lux

357 lux

0.2 lux

18”

39”

118”

3.3 fc

33 fc

0.02 fc

Chilone 90 FLOOR

Lighting application

LED 8W h

L

a

Em

Emax

Emin

0,90 m

1,0 m

4,0 m

18 lux

70 lux

0.2 lux

35”

39”

157”

1.7 fc

6.5 fc

0.02 fc

Chilone POLE

Lighting application

LED 16W

26

h

L

a

Em

Emax

Emin

2,50 m

2,50 m

9,25 m

3 lux

8 lux

0.4 lux

98”

98”

364”

0.3 fc

0.75 fc

0.04 fc


Chilone

WALL / FLOOR Chilone wall 6 5/8” 16,8 cm

back plate

1 7/8” 4,8 cm 17 1/8” 43,5 cm

4 7/16” 11,2 cm 10” 25,5 cm

Chilone WALL

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption

lumens

CCT

CRI

T082408

6 LED

16W

639lm

3000K

80

grey white

T082418

6 LED

16W

639lm

3000K

80

rust

finish 426 319 Symm.

Electronic driver integrated

213 106 90°

-90°

cd

19 5/16” 49 cm 6 5/8” 6 5/16” 16,8 cm 16 cm

Chilone UP FLOOR

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption

lumens

CCT

CRI

T082308

6 LED

16W

515lm

3000K

80

grey white

T082318

6 LED

16W

515lm

3000K

80

rust

finish

316 Asymm.

Electronic driver integrated

237 158 79 -90°

90° cd Chilone 45 floor

17 11/16” 45 cm 6 5/8” 16,8 cm

Chilone 45 FLOOR

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption

lumens

CCT

CRI

T082208

6 LED

8W

194lm

3000K

80

grey white

T082218

6 LED

8W

194lm

3000K

80

rust

6 7/8” 17,5 cm

finish -90° Asymm.

Electronic driver integrated

3m

90° 31

5

62

15 35 55

94

95

125 0m cd

lux Chilone 90 floor

35 7/16” 90 cm

6 5/8” 6 7/8” 16,8 cm 17,5 cm

Chilone 90 FLOOR

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption

lumens

CCT

CRI

T082108

6 LED

8W

194lm

3000K

80

grey white

T082118

6 LED

8W

194lm

3000K

80

rust

Electronic driver integrated

finish -90°

90°

Asymm.

3m

5

31

10

15 25 35 50

62 94 125

0m cd

lux

27


28

Ranco, Varese (Italy)


Chilone

WALL / FLOOR

98 7/16” 250 cm

6 5/8” 16,8 cm

Chilone POLE

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption

lumens

CCT

CRI

T082008

6 LED

16W

310lm

3000K

80

T082018

6 LED

Electronic driver integrated

16W

310lm

3000K

80

8 1/4” 21 cm

finish

grey white

-90°

rust

47 Asymm.

3

90°

6m

6 9

95

12

142 189

0m cd

lux

29


WALL / FLOOR

Ciclope design by Alessandro Pedretti (Studio Rota & Partners)

Ciclope wall

LIGHTING SYSTEM WITH DIFFUSED UNILATERAL OR BILATERAL EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. LIGHT EMISSION IS OBTAINED BY THE COMBINATION OF SIX MONOCHROMATIC LED LIGHT SOURCES, A REFLECTOR AND OPALINE DIFFUSER. CICLOPE WALL • AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE RAL9002)

OR RUST • FRAME

IN EXTRUDED EN AW-6060 ALUMINUM

• LIGHTING

UNIT COMPOSED BY :

··FRAME IN REINFORCED POLYMER ··DIFFUSER IN LIGHT-DIFFUSING POLYCARBONATE ··PLATE IN PICKLED, MACHINED AND GALVANIZED STEEL ··WATERTIGHT GASKET IN SILICONE RUBBER ··LED CIRCUIT ··ELECTRONIC DRIVER ··REFLECTOR IN PAINTED SPUN ALUMINUM • STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

30

• LIGHTING

UNIT HOUSES THE ELECTRICAL COMPONENTS AND SOURCES

• AESTHETIC

COVER IN DIE-CAST EN AB-47100 ALUMINUM

• ELEMENTS

ARE FIXED TOGETHER BY MEANS OF SCREWS. ALL LOCKING SCREWS USED OUTSIDE THE FIXTURE AND INSIDE THE STEM ARE IN AISI 304 STAINLESS STEEL

• COMPONENTS

IN DIE-CAST, EXTRUDED ALUMINUM AND STEEL ARE PAINTED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• WALL

SUPPORT INCLUDED


CICLOPE FLOOR • AVAILABLE

IN UNILATERAL AND BILATERAL EMISSION AND IN 2 HEIGHTS : 19 11/16” (50 cm) AND 35 7/16” (90 cm)

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST • STEM

IN EXTRUDED EN AW-6060 ALUMINUM

• LIGHTING

UNIT COMPOSED BY :

• AESTHETIC

COVER IN DIE-CAST EN AB-47100 ALUMINUM

• GROUND

MOUNTING PLATE IN FOLDED, WELDED AND PAINTED STEEL, WITH HOLES FOR GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS; INCLUDED ARE FIXED TOGETHER BY MEANS OF SCREWS. ALL LOCKING SCREWS USED OUTSIDE FIXTURE AND INSIDE STEM ARE IN AISI 304 STAINLESS STEEL

··DIFFUSER IN LIGHT-DIFFUSING POLYCARBONATE ··PLATE IN PICKLED, MACHINED AND GALVANIZED STEEL ··LED CIRCUIT

UNIT HOUSES THE ELECTRICAL COMPONENTS AND SOURCES

• ELEMENTS

··FRAME IN REINFORCED POLYMER

··WATERTIGHT GASKET IN SILICONE RUBBER

• LIGHTING

• COMPONENTS

IN DIE-CAST, EXTRUDED ALUMINUM AND STEEL ARE PAINTED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

··ELECTRONIC DRIVER ··REFLECTOR IN PAINTED SPUN ALUMINUM • STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

Ciclope 100 floor bilateral

Ciclope 50 floor unilateral

Ciclope 100 floor unilateral

Ciclope 50 floor bilateral

31


Ciclope

WALL / FLOOR

Ciclope 50 UNILATERAL FLOOR

Lighting application

LED 6.5W h

L

a

Em

Emax

Emin

0,5 m

1,0 m

2,9 m

41 lux

225 lux

0.2 lux

20”

39”

114”

3.8 fc

21 fc

0.02 fc

Ciclope 90 UNILATERAL FLOOR

Lighting application

LED 6.5W h

L

a

Em

Emax

Emin

0,90 m

1,0 m

3,5 m

25 lux

67 lux

0.2 lux

35”

39”

138”

2.3 fc

6.2 fc

0.02 fc

Ciclope 90 BILATERAL FLOOR

Lighting application

LED 2x6.5W h

L

a

Em

Emax

Emin

0,90 m

1,0 m

3,5 m

21 lux

66 lux

0.6 lux

35”

39”

138”

2 fc

6.1 fc

0.05 fc

Ciclope WALL

Lighting application

LED 6.5W

32

h

L

a

Em

Emax

Emin

0,5 m

1,0 m

2,9 m

39 lux

225 lux

0.2 lux

20”

39”

114”

3.6 fc

21 fc

0.02 fc


Ciclope

WALL / FLOOR Ciclope wall 4 1/3” 11 cm

10 5/8” 27 cm

2” 5 cm

Ciclope WALL IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption

lumens

CCT

CRI

T081208

5 LED

6.5W

274lm

3000K

80

T081218

5 LED

Electronic driver integrated

6.5W

274lm

3000K

80

6 5/8” 17 cm

finish -90°

grey white rust

2m

90° 36

Asymm.

20

73

50 80 140 200

109 146

0m cd

lux

33


34


Ciclope

WALL / FLOOR 4 1/3” 11 cm

19 11/16” 50 cm

Ciclope 50 UNILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

2” 5 cm

code

lamping

power consumption

lumens

CCT

CRI

T081008

5 LED

6.5W

284lm

3000K

80

grey white

T081018

5 LED

6.5W

284lm

3000K

80

rust

6 5/8” 17 cm

finish -90° Asymm.

Electronic driver integrated

2m

90°

20

34

50 80 140 200

69 103 137

0m cd

lux

6 5/8” 17 cm

19 11/16” 50 cm

Ciclope 50 BILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

2” 5 cm

code

lamping

power consumption

lumens

CCT

CRI

T081308

10 LED

2x6.5W

568lm

3000K

80

grey white

T081318

10 LED

2x6.5W

568lm

3000K

80

rust

Electronic driver integrated

6 5/8” 17 cm

2” 5 cm

finish -90° 36

90°

71

20

50 110 170 200

2m

107 143

0m cd

lux

35


36


Ciclope

WALL / FLOOR 4 1/3” 11 cm

35 7/16” 90 cm

Ciclope 90 UNILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

2” 5 cm

code

lamping

power consumption

lumens

CCT

CRI

T081108

5 LED

6.5W

284lm

3000K

80

grey white

T081118

5 LED

6.5W

284lm

3000K

80

rust

6 5/8” 17 cm

finish -90° Asymm.

Electronic driver integrated

2m

90°

20

34

30 40 50 60

69 103 137

0m cd

lux

6 5/8” 17 cm

35 7/16” 90 cm

Ciclope 90 BILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

6 5/8” 17 cm

code

lamping

power consumption

lumens

CCT

CRI

T081408

10 LED

2x6.5W

568lm

3000K

80

T081418

10 LED

Electronic driver integrated

2x6.5W

568lm

3000K

80

2” 5 cm

finish

grey white rust

-90° 36

90°

71

20

50 30

2m 60

40 20

40

107 143

0m cd

lux

37


WALL / FLOOR

Cuneo design by Klaus Begasse

LIGHT FIXTURE WITH DIRECT SIDE EMISSION AND HIGH-PERFORMANCE LED SOURCE. • SIX

MONOCHROMATIC LEDS ARE USED TOGETHER WITH SIX COLLIMATORS AND A LIGHT-DIFFUSING PRISMATIC SCREEN TO OBTAIN AN OPTIMUM LIGHTING BEAM

• FLOOR

OR WALL INSTALLATION. IN WALL INSTALLATION, THE LIGHT CAN BE POINTED EITHER UPWARDS OR DOWNWARDS

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST • COMPOSED

BY LIGHTING CAP AND TERMINAL BOARD FIXED TOGETHER BY MEANS OF LOCKING SCREWS

• CAP

AND TERMINAL BOARD IN DIE-CAST EN AB-47100 ALUMINUM, GASKETS IN SILICONE RUBBER

• PMMA

COLLIMATORS INSTALLED ON THE LED LIGHT SOURCES

• LIGHT-DIFFUSING

PRISMATIC SCREEN IN PMMA SILICONED FLUSH WITH THE LIGHTING CAP

• WALL

INSTALLATION BY MEANS OF A BRACKET IN FOLDED STEEL SHEET TO WHICH THE FIXTURE IS FASTENED WITH 2 SCREWS

• SCREWS

IN AISI 316 STAINLESS STEEL

• ALL

COMPONENTS IN DIE-CAST ALUMINUM AND STEEL BRACKETS FOR WALL OR FLOOR FIXING PAINTED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

38

DRIVER INTEGRATED


Cuneo

WALL / FLOOR

Elliptical optic The elliptical light emission and the flat shape of the fixture make it particularly suitable for floors or spacious areas in gardens to provide a side lighting.

7 7/8” 20 cm 2 3/4” 7 cm 6 5/8” 17 cm

Cuneo

IP65 IK10 Tested in accordance with IES LM-79-08

code

lamping

power consumption lumens

CCT

T082908

6 LED

16W

713lm

4000K 80

32°

grey white

T082918

6 LED

16W

713lm

4000K 80

32°

rust

Electronic driver integrated

CRI

beam

finish -90°

90° 496

Elliptical

992 1488 1984 cd

H m

ØC0 m

Ø C90 m

E lux

0,5

0,13

0,62

8756

1,0

0,26

1,23

2189

1,5

0,38

1,85

973

2,0

0,51

2,46

547

2,5

0,64

3,08

350

3,0

0,77

3,69

243 32º

39


WALL/CEILING

DIOSCURI design by Michele De Lucchi

WALL/CEILING MOUNTED LUMINAIRES FOR DIFFUSED LIGHTING. • WALL/CEILING

MOUNTED LUMINAIRES FOR DIFFUSED

LIGHTING • BASE

IN THERMOPLASTIC RESIN

• DIFFUSER

MADE OUT OF HANDBLOWN GLASS

• DIMMABLE • IP65

40

(USE DIMMABLE BULB)


Avaton Hotel & Spa, Santorini (GR) Architectural Project: K. Vasileiadou - A. Papadimitriou Photo: Thouas Periklis

41


42


DIOSCURI

wall/CEILING

9” 23 cm ø 10” ø 25 cm

DIOSCURI 25 IP65

code

lamping

0112018A

E26/A19 LED,CFL,INC max 100W

finish

white glass

0112018APL13

FLU Gx24q-1 1x13W

white glass

0112018APL18

FLU Gx24q-2 1x18W

white glass

Diffused

13 3/8” 34 cm ø 13 3/4” ø 35 cm

DIOSCURI 35 code

IP65

lamping

finish

0116018A

E26/A19 LED,CFL,INC max 100W

white glass

0116018APL18

FLU Gx24q-2 1x18W

white glass

0116018APL26

FLU Gx24q-2 1x26W

white glass

Diffused

16 1/2” 42 cm ø 16 1/2” ø 42 cm

DIOSCURI 42 code

IP65

lamping

finish

0117018A

E26/A19 LED, CFL, INC max 100W

white glass

0117018APL26

FLU GX24q-3 1x26W

white glass

0117018APL32

FLU GX24q-3 1x32W

white glass

Diffused

43


WALL

Effetto design by Ernesto Gismondi

44


LIGHT FIXTURE WITH 1, 2 OR 4 LIGHT BEAMS USING MONOCHROMATIC LED LIGHT SOURCES. LIGHT-DIFFUSING LENSES OPTIMIZE THE OPTICAL PERFORMANCE OF THE BEAMS AND ESTABLISH THEIR WIDTH. DESIGNED TO CREATE GEOMETRIC LIGHTS OF SCENIC EFFECT. AVAILABLE WITH BEAMS OF THE SAME SPREAD OR WITH COMBINED BEAMS. • BEAM

SPREAD OF 5° AND 50° FOR SQUARE VERSION; 4° AND 40° FOR EFFETTO ROUND VERSION

• WALL

INSTALLATION

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST BY LIGHTING CAP UNIT AND TERMINAL BOARD FIXED TOGETHER BY MEANS OF LOCKING DOWELS

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

• LOCKING

DOWELS USED OUTSIDE THE FIXTURE IN AISI 316 STAINLESS STEEL

• COMPOSED

• PAINTED

• CAP

• STANDARD

IN DIE-CAST EN AB-47100 ALUMINUM

• TERMINAL

BOARD IN REINFORCED POLYMER

• WATERTIGHT • PMMA

GASKET IN SILICONE RUBBER

LENSES SILICONED TO BODY TO OBTAIN 2 DIFFERENT BEAM ANGLE OPENINGS (NARROW AND WIDE)

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED

45


46


Effetto

WALL

5 1/2” 14 cm 5 1/2” 14 cm

Effetto 1 NARROW BEAM

IP65

code

lamping

power consumption lumens

CCT

CRI

beam

T42021NW08

1 LED

4.5W

11lm

3000K 80

1x5°

grey white

T42021NW18

1 LED

4.5W

11lm

3000K 80

1x5°

rust

T42021NN08

1 LED

4.5W

12lm

4000K 75

1x5°

grey white

T42021NN18

1 LED

4.5W

12lm

4000K 75

1x5°

rust

finish -90°

90° 87

Spot

174 261

Electronic driver integrated

348 cd

5 1/2” 14 cm 5 1/2” 14 cm

Effetto 1 LARGE BEAM

IP65

code

lamping

power consumption lumens

CCT

T42021LW08

1 LED

4.5W

11lm

3000K 80

1x50°

grey white

T42021LW18

1 LED

4.5W

11lm

3000K 80

1x50°

rust

T42021LN08

1 LED

4.5W

12lm

4000K 75

1x50°

grey white

T42021LN18

1 LED

4.5W

12lm

4000K 75

1x50°

rust

CRI

beam

finish -90°

90° 6

Wide flood

13 19

Electronic driver integrated

25 cd

5 1/2” 14 cm 5 1/2” 14 cm

Effetto 2 NARROW BEAMS

IP65

code

lamping

power consumption lumens

CCT

CRI

beam

T42012NW08

2 LED

9W

22lm

3000K 80

2x5°

grey white

T42012NW18

2 LED

9W

22lm

3000K 80

2x5°

rust

T42012NN08

2 LED

9W

24lm

4000K 75

2x5°

grey white

T42012NN18

2 LED

9W

24lm

4000K 75

2x5°

rust

Electronic driver integrated

finish

Double emission Spot

-90°

90° 89 178 267 356 cd

47


48


Effetto

WALL

5 1/2” 14 cm 5 1/2” 14 cm

Effetto 2 LARGE BEAMS

IP65

code

lamping

power consumption lumens

CCT

T42012LW08

2 LED

9W

23lm

3000K 80

2x50°

grey white

T42012LW18

2 LED

9W

23lm

3000K 80

2x50°

rust

T42012LN08

2 LED

9W

25lm

4000K 75

2x50°

grey white

T42012LN18

2 LED

9W

25lm

4000K 75

2x50°

rust

CRI

beam

finish

Double emission Wide flood

-90°

90° 6 13

Electronic driver integrated

19 26 cd

5 1/2” 14 cm

Effetto 1 NARROW BEAM / 1 LARGE BEAM

IP65

5 1/2” 14 cm

code

power lamping consumption lumens CCT

T4201NLW08

2 LED

9W

23lm 3000K 80 1x5°+1x50°

grey white

T4201NLW18

2 LED

9W

23lm 3000K 80 1x5°+1x50°

rust

T4201NLN08

2 LED

9W

24lm 4000K 75 1x5°+1x50°

grey white

T4201NLN18

2 LED

9W

24lm 4000K 75 1x5°+1x50°

rust

CRI beam

finish

Double emission Spot/Wide flood

-90°

90° 89 178

Electronic driver integrated

268 357 cd

5 1/2” 14 cm 5 1/2” 14 cm

Effetto 4 NARROW BEAMS

IP65

code

lamping

power consumption lumens

CCT

CRI

beam

T42004NW08

4 LED

18W

46lm

3000K 80

4x5°

grey white

T42004NW18

4 LED

18W

46lm

3000K 80

4x5°

rust

T42004NN08

4 LED

18W

49lm

4000K 75

4x5°

grey white

T42004NN18

4 LED

18W

49lm

4000K 75

4x5°

rust

finish

Quadruple emission Spot

-90°

90° 89 178

Electronic driver integrated

267 356 cd

5 1/2” 14 cm 5 1/2” 14 cm

Effetto 4 LARGE BEAMS

IP65

code

lamping

power consumption lumens

CCT

T42004LW08

4 LED

18W

48lm

3000K 80

4x50°

grey white

T42004LW18

4 LED

18W

48lm

3000K 80

4x50°

rust

T42004LN08

4 LED

18W

51lm

4000K 75

4x50°

grey white

T42004LN18

4 LED

18W

51lm

4000K 75

4x50°

rust

Electronic driver integrated

CRI

beam

finish

Quadruple emission Wide flood

-90°

90° 6 13 19 26 cd

49


Effetto

WALL ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 1 NARROW BEAM

IP65

code

lamping

power consumption lumens

CCT

CRI

beam

T42121NW08

1 LED

4.5W

7lm

3000K 80

1x4°

grey white

T42121NW18

1 LED

4.5W

7lm

3000K 80

1x4°

rust

T42121NN08

1 LED

4.5W

7lm

4000K 75

1x4°

grey white

T42121NN18

1 LED

4.5W

7lm

4000K 75

1x4°

rust

finish -90°

90° 35

Spot

70 106

Electronic driver integrated

141 cd

ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 1 LARGE BEAM

IP65

code

lamping

power consumption lumens

CCT

T42121LW08

1 LED

4.5W

9lm

3000K 80

1x40°

grey white

T42121LW18

1 LED

4.5W

9lm

3000K 80

1x40°

rust

T42121LN08

1 LED

4.5W

10lm

4000K 75

1x40°

grey white

T42121LN18

1 LED

4.5W

10lm

4000K 75

1x40°

rust

CRI

beam

finish -90°

90° 6

Wide flood

13 19

Electronic driver integrated

25 cd

ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 2 NARROW BEAMS

IP65

code

lamping

power consumption lumens

CCT

T42112NW08

2 LED

9W

13lm

3000K 80

2x4°

grey white

T42112NW18

2 LED

9W

13lm

3000K 80

2x4°

rust

T42112NN08

2 LED

9W

14lm

4000K 75

2x4°

grey white

T42112NN18

2 LED

9W

14lm

4000K 75

2x4°

rust

Electronic driver integrated

CRI

beam finish

Double emission Spot

-90°

90° 35 70 105 140 cd

50


Effetto

WALL ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 2 LARGE BEAMS

IP65

code

lamping

power consumption lumens

CCT

T42112LW08

2 LED

9W

19lm

3000K 80

2x40°

grey white

T42112LW18

2 LED

9W

19lm

3000K 80

2x40°

rust

T42112LN08

2 LED

9W

20lm

4000K 75

2x40°

grey white

T42112LN18

2 LED

9W

20lm

4000K 75

2x40°

rust

CRI

beam

finish

Double emission Wide flood

-90°

90° 6 13

Electronic driver integrated

19 25 cd

ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 1 NARROW BEAM / 1 LARGE BEAM

IP65

code

power lamping consumption lumens CCT

T4211NLW08

2 LED

9W

16lm 3000K 80 1x4°+1x40°

grey white

T4211NLW18

2 LED

9W

16lm 3000K 80 1x4°+1x40°

rust

T4211NLN08

2 LED

9W

17lm 4000K 75 1x4°+1x40°

grey white

T4211NLN18

2 LED

9W

17lm 4000K 75 1x4°+1x40°

rust

CRI beam

finish

Double emission Spot/Wide flood

-90°

90° 35 70

Electronic driver integrated

105 141 cd

ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 4 NARROW BEAMS

IP65

code

lamping

power consumption lumens

CCT

CRI

beam

T42104NW08

4 LED

18W

26lm

3000K 80

4x4°

grey white

T42104NW18

4 LED

18W

26lm

3000K 80

4x4°

rust

T42104NN08

4 LED

18W

28lm

4000K 75

4x4°

grey white

T42104NN18

4 LED

18W

28lm

4000K 75

4x4°

rust

finish

Quadruple emission Spot

-90°

90° 38 76

Electronic driver integrated

114 152 cd

ø 6 5/16” ø 16 cm

5 1/2” 14 cm

Effetto ROUND 4 LARGE BEAMS

IP65

code

lamping

power consumption lumens

CCT

T42104LW08

4 LED

18W

37lm

3000K 80

4x40°

grey white

T42104LW18

4 LED

18W

37lm

3000K 80

4x40°

rust

T42104LN08

4 LED

18W

39lm

4000K 75

4x40°

grey white

T42104LN18

4 LED

18W

39lm

4000K 75

4x40°

rust

Electronic driver integrated

CRI

beam

finish

Quadruple emission Wide flood

-90°

90° 6 13 19 25 cd

51


WALL / CEILING / FLOOR

Epulo design by Ernesto Gismondi

LIGHT FIXTURE WITH ADJUSTABLE DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. • FLOOR,

WALL AND SOFFIT/CEILING INSTALLATION

• AVAILABLE

IN 2 SIZES : EPULO 13, EPULO 18

• AVAILABLE

IN 2 FINISHES PAINTED : GREY WHITE (RAL9002) OR ANTHRACITE GREY

• COMPOSED

BY ADJUSTABLE LIGHTING UNIT, TERMINAL BOARD AND FIXING BRACKET. ROTATION ON THE BASE +/-180°, SIDE BODY TILT +/-45° AND FRONT BODY TILT +/-90° BY MEANS OF A SPHERICAL JOINT ALLOWING AN ACCURATE ADJUSTMENT

• BODY

AND TERMINAL BOARD IN EN AB44100 ALUMINUM, FIXING BRACKET IN STAINLESS STEEL, SILICONE GASKETS

• SILKSCREENED

TEMPERED GLASS SILICONED FLUSH WITH THE BODY TO AVOID BACKWATER

• GLASS

52

THICKNESS OF 0.2” (5MM) FOR EPULO 13 AND

0.3” (8MM) FOR EPULO 18 • PMMA

LENSES IN 3 DIFFERENT VERSIONS OF BEAMS: SPOT, FLOOD AND WALL WASHER

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

• SCREWS

IN AISI 316 STAINLESS STEEL

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Epulo

WALL / ceiling / FLOOR

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

10째 optic

34째 optic

7째 x 48째 optic

53


Epulo

WALL / ceiling / FLOOR 5 1/8” 13 cm

12 5/16” 31,3 cm

6 1/8” 15,6 cm

Epulo 13 code

IP65 IK06

lamping

power consumption lumens

CCT

CRI

beam

finish

Spot beam

H m

ØC0 m

Ø C90 m

4841

0,5

0,09

0,09

77454

9682

1

0,19

0,19

19363

1,5

0,28

0,28

8606

2

0,37

0,37

4841

2,5

0,46

0,46

3098

3

0,56

0,56

2151

H m

ØC0 m

Ø C90 m

0,5

0,31

0,31

7781

1

0,62

0,62

1945

1,5

0,92

0,92

865

2

1,23

1,23

486

2,5

1,54

1,54

311

3

1,85

1,85

216

H m

ØC0 m

Ø C90 m

0,5

0,06

0,44

25358

1

0,13

0,89

6340

1,5

0,19

1,33

2818

2

0,26

1,77

1585

2,5

0,32

2,22

1014

3

0,39

2,66

-90°

T418910W08

9 LED

22W

954lm

3000K 80

10°

grey white

T418910W18

9 LED

22W

954lm

3000K 80

10°

anth. grey

T418910N08

9 LED

22W

1053lm 4000K 75

10°

grey white

T418910N18

9 LED

22W

1053lm 4000K 75

10°

anth. grey

Spot

90°

14523 -30°

Electronic driver integrated

19363

30°

3000K

Flood beam

cd

-90°

T418939W08

9 LED

22W

764lm

3000K 80

34°

grey white

T418939W18

9 LED

22W

764lm

3000K 80

34°

anth. grey

T418939N08

9 LED

22W

874lm

4000K 75

34°

grey white

T418939N18

9 LED

22W

874lm

4000K 75

34°

90° 487

Flood

974 1461

anth. grey

-30°

Electronic driver integrated

1948

30°

3000K

Elliptical wall washer beam 9 LED

22W

830lm

3000K 80

7°x48°

grey white

T4189ELW18

9 LED

22W

830lm

3000K 80

7°x48°

anth. grey

T4189ELN08

9 LED

22W

950lm

4000K 75

7°x48°

grey white

T4189ELN18

9 LED

22W

950lm

4000K 75

7°x48°

Electronic driver integrated

anth. grey

3218 4826 -30° 3000K

54

90° 1609

Elliptical wall washer

10º

cd

-90°

T4189ELW08

6435

30° cd

E lux

E lux

34º

E lux

704 7ºx48º


Epulo

WALL / ceiling / FLOOR 7 1/16” 18 cm

15 1/4” 38,7 cm

6 1/8” 15,6 cm

Epulo 18 code

IP65 IK06

lamping

power consumption lumens

CCT

CRI

beam

finish

Spot beam

H m

Ø C0 m

Ø C90 m

8266

0,5

0,09

0,09

16532

1

0,19

0,19

33047

1,5

0,28

0,28

14687

2

0,37

0,37

8262

2,5

0,46

0,46

5287

3

0,56

0,56

3672

H m

ØC0 m

Ø C90 m

865

0,5

0,31

0,31

1730

1

0,62

0,62

3455

1,5

0,92

0,92

1536

2

1,23

1,23

864

2,5

1,54

1,54

553

3

1,85

1,85

384

H m

ØC0 m

Ø C90 m

2861

0,5

0,06

0,44

45095

5721

1

0,13

0,89

11274

1,5

0,19

1,33

5011

2

0,26

1,77

2818

2,5

0,32

2,22

1804

3

0,39

2,66

-90°

T418810W08

16 LED 37W

1637lm 3000K 80

10°

grey white

T418810W18

16 LED 37W

1637lm 3000K 80

10°

anth. grey

T418810N08

16 LED 37W

1873lm 4000K 75

10°

grey white

T418810N18

16 LED 37W

1873lm 4000K 75

10°

anth. grey

Spot

90°

24798 -30°

Electronic driver integrated

33064

30°

3000K

Flood beam

cd

-90°

T418839W08

16 LED 37W

1358lm 3000K 80

34°

grey white

T418839W18

16 LED 37W

1358lm 3000K 80

34°

anth. grey

T418839N08

16 LED 37W

1554lm 4000K 75

34°

grey white

T418839N18

16 LED 37W

1554lm 4000K 75

34°

anth. grey

Flood

90°

2595 -30°

Electronic driver integrated

3460

30°

3000K

Elliptical wall washer beam T4188ELW08

16 LED 37W

1477lm 3000K 80

7°x48°

grey white

T4188ELW18

16 LED 37W

1477lm 3000K 80

7°x48°

anth. grey

T4188ELN08

16 LED 37W

1689lm 4000K 75

7°x48°

grey white

T4188ELN18

16 LED 37W

1689lm 4000K 75

7°x48°

anth. grey

Electronic driver integrated

Elliptical wall washer

90°

8582 -30° 3000K

11442

30° cd

132187

10º

cd

-90°

E lux

E lux 13821

34º

E lux

1253 7ºx48º

55


56

Danese Milano, Milan (Italy)


57


FLOOR

Eraclea design by Neil Poulton

LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE MONOCHROMATIC LED LIGHT SOURCES. • FLOOR • GREY

INSTALLATION

WHITE (RAL9002) FINISH

• LAMP

UNIT IN DIE-CAST CONCRETE, PAINTED WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• UV

RESISTANT DIFFUSER IN TRANSPARENT SHOCK RESISTANT POLYCARBONATE

• PAINTED

TRAPEZOIDAL LAMP SUPPORT IN VIBRATED CONCRETE, WITH GALVANIZED RING FOR FIXING TO THE BASE

• ACCESSORY

COMPARTMENT IN POLYMERS WITH CLOSURE COVER

IN AISI 316 • HOT

GALVANIZED STEEL MOUNTING PLATE, WITH HOLES FOR GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• PROVIDED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

58

DRIVER INTEGRATED


Eraclea

FLOOR 5 1/8” 13 cm

31 1/2” 80 cm

20” 51 cm

Eraclea

IP65

code

lamping

power consumption

lumens

CCT

CRI

T085308

6 LED

8W

284lm

4000K

75

finish

grey white

Electronic driver integrated Bidirectional

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

59


WALL / CEILING / FLOOR

Falange design by Wilmotte & Industries

60


ADJUSTABLE LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. • FLOOR,

WALL, CEILING AND SOFFIT INSTALLATION

• AVAILABLE

IN 2 SIZES : SQUARE 5 5/16” X 5 5/16” (13,4 cm X 13,4 cm) OR RECTANGULAR 9 3/8” X 5 5/16” (23,8 cm X13,4 cm)

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002) OR ANTHRACITE GREY

• COMPOSED

BY ADJUSTABLE LIGHTING UNIT AND SUPPORT (HOUSING THE WIRING). ROTATION ON BASE +/-180°, BODY TILT +/-100° BY MEANS OF A GRADUATED METAL RING ALLOWING AN ACCURATE ADJUSTMENT. POSITIONING IS MAINTAINED BY MEANS OF LOCKING DOWELS

• BODY

AND SUPPORT IN EN AB44100 ALUMINUM, SILICONE GASKETS

• GLASS

THICKNESS OF 0.4” (10mm)

• SILKSCREENED

TEMPERED GLASS SILICONED TO A SECONDARY FRAME

• PMMA

LENSES IN 3 DIFFERENT VERSIONS OF BEAMS: SPOT, FLOOD AND WALL WASHER

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

• AISI

316 STAINLESS STEEL SCREWS

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED

61


Falange

WALL / ceiling / floor

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

10° optic

34° optic

7°x48° optic

5 5/16” 13,4 cm

8 7/16” 21,4 cm

5 5/16” 13,4 cm

Falange 9 code

IP65 IK10

power lamping consumption lumens

CCT

CRI beam

finish

Spot beam

H m

ØC0 m

Ø C90 m

4841

0,5

0,09

0,09

77454

9682

1

0,19

0,19

19363

1,5

0,28

0,28

8606

2

0,37

0,37

4841

2,5

0,46

0,46

3098

3

0,56

0,56

2151

H m

ØC0 m

Ø C90 m

0,5

0,31

0,31

7781

1

0,62

0,62

1945

1,5

0,92

0,92

865

2

1,23

1,23

486

2,5

1,54

1,54

311

3

1,85

1,85

216

H m

ØC0 m

Ø C90 m

0,5

0,06

0,44

25358

1

0,13

0,89

6340

1,5

0,19

1,33

2818

2

0,26

1,77

1585

2,5

0,32

2,22

1014

3

0,39

2,66

-90°

NL3000010K002UL 9 LED

22W

954lm 3000K 80 10°

grey white

NL3000010K005UL 9 LED

22W

954lm 3000K 80 10°

anth. grey

NL3000010W002UL 9 LED

22W

1053lm 4000K 75 10°

grey white

NL3000010W005UL 9 LED

22W

1053lm 4000K 75 10°

anth. grey

Spot

90°

14523 -30°

Electronic driver integrated

19363

30°

3000K

Flood beam

cd

-90°

NL3000039K002UL 9 LED

22W

764lm 3000K 80 34°

grey white

NL3000039K005UL 9 LED

22W

764lm 3000K 80 34°

anth. grey

NL3000039W002UL 9 LED

22W

874lm 4000K 75 34°

grey white

NL3000039W005UL 9 LED

22W

874lm 4000K 75 34°

90° 487

Flood

974 1461

anth. grey

-30°

Electronic driver integrated

1948

30°

3000K

Elliptical wall washer beam NL30000ELK002UL 9 LED

22W

830lm 3000K 80 7°x48°

grey white

22W

830lm 3000K 80 7°x48°

anth. grey

NL30000ELW002UL 9 LED

22W

950lm 4000K 75 7°x48°

grey white

Electronic driver integrated

22W

950lm 4000K 75 7°x48°

anth. grey

1609 Elliptical wall washer

3218 4826 -30° 3000K

62

90°

6435

30° cd

E lux

10º

cd

-90°

NL30000ELK005UL 9 LED NL30000ELW005UL 9 LED

4 1/8” 10,5 cm

E lux

34º

E lux

704 7ºx48º


Falange

WALL / ceiling / floor Falange18 5 5/16” 13,4 cm

4 1/8” 10,5 cm

9 3/8” 23,8 cm

Falange 18 code

IP65 IK10

8 7/16” 21,4 cm

power lamping consumption lumens

CCT

CRI beam

finish

Spot beam

H m

Ø C0 m

Ø C90 m

9682

0,5

0,09

0,09

19363

1

0,19

0,19

38723

1,5

0,28

0,28

17210

2

0,37

0,37

9681

2,5

0,46

0,46

6196

3

0,56

0,56

4303

H m

ØC0 m

Ø C90 m

974

0,5

0,31

0,31

1948

1

0,62

0,62

3889

1,5

0,92

0,92

1728

2

1,23

1,23

972

2,5

1,54

1,54

622

3

1,85

1,85

432

H m

ØC0 m

Ø C90 m

3219

0,5

0,06

0,44

50716

6438

1

0,13

0,89

12679

1,5

0,19

1,33

5635

2

0,26

1,77

3170

2,5

0,32

2,22

2029

3

0,39

2,66

-90°

NL3000110K002UL 18 LED 44W

1917lm 3000K 80 10°

grey white

NL3000110K005UL 18 LED 44W

1917lm 3000K 80 10°

anth. grey

NL3000110W002UL 18 LED 44W

2106lm 4000K 75 10°

grey white

NL3000110W005UL 18 LED 44W

2106lm 4000K 75 10°

anth. grey

Spot

90°

29045 -30°

38727

30°

Electronic driver integrated 3000K

Flood beam

cd

-90°

NL3000139K002UL 18 LED 44W

1529lm 3000K 80 34°

NL3000139K005UL 18 LED 44W

1529lm 3000K 80 34°

NL3000139W002UL 18 LED 44W

1749lm 4000K 75 34°

grey white

NL3000139W005UL 18 LED 44W

1749lm 4000K 75 34°

anth. grey

grey white anth. grey

Flood

90°

2922 -30°

3896

30°

Electronic driver integrated 3000K

Elliptical wall washer beam 1661lm 3000K 80 7°x48°

grey white

NL30001ELK005UL 18 LED 44W

1661lm 3000K 80 7°x48°

anth. grey

NL30001ELW002UL 18 LED 44W

1899lm 4000K 75 7°x48°

grey white

NL30001ELW005UL 18 LED 44W

1899lm 4000K 75 7°x48°

anth. grey

Elliptical wall washer

90°

9657 -30°

12876

30°

Electronic driver integrated 3000K

cd

154892

10º

cd

-90°

NL30001ELK002UL 18 LED 44W

E lux

E lux 15554

34º

E lux

1409 7ºx48º

63


WALL / CEILING / FLOOR

Giasole design by Ernesto Gismondi

SERIES OF LIGHT FIXTURES WITH DIFFUSED EMISSION AND HALOGEN OR FLUORESCENT SOURCES. GIASOLE WALL / CEILING • HORIZONTAL • AVAILABLE

OR VERTICAL INSTALLATION

IN 3 FINISHES : PAINTED WHITE, SILVER GREY OR BLACK

• LAMP

UNIT AND WALL SUPPORT IN DIE-CAST EN-AB 46100 ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXYDANT PRIMER, POLYESTER PAINT

• MOLDED

DIFFUSER IN INTERNALLY SANDED SODIUM-CALCIUM GLASS

• STAINLESS • SUITABLE • WALL • FOR

STEEL SCREWS AND SILICONE SEAL GASKETS

FOR WATERTIGHT CONNECTION

SUPPORT INCLUDED

E26/A19 VERSION, DIMMABLE (USE DIMMABLE BULB) FOR FLU VERSION DIMMING OPTIONS, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE

64


GIASOLE FLOOR • AVAILABLE

IN 2 FINISHES: PAINTED SILVER GREY OR BLACK

• LAMP

UNIT AND FLOOR SUPPORT IN DIE-CAST EN-AB 46100 ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• MOLDED • POLE

DIFFUSER IN INTERNALLY SANDED SODIUM-CALCIUM GLASS

IN PAINTED EXTRUDED ALUMINUM TO BE ORDERED SEPARATELY

• FIXING

WITH GROUND MOUNTING PLATE OR UNDERGROUND POLE

• SUPPORT

PLATE IN GALVANIZED AND PAINTED STEEL

• STAINLESS • SUITABLE

STEEL SCREWS AND SILICONE SEAL GASKETS

FOR WATERTIGHT CONNECTION

• FOR

E26/A19 VERSION, DIMMABLE (USE DIMMABLE BULB) FOR FLU VERSION DIMMING OPTIONS, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE

65


Giasole

WALL / CEILING / FLOOR Giasole wall 4 3/4” 12 cm 5 15/16” 15 cm

Giasole WALL / CEILING IP54

13” 33 cm

code

lamping

T051308

LED, CFL, INC max 1x75W (E26/A19)

finish

white

T051338

LED, CFL, INC max 1x75W (E26/A19)

black

T051398

LED, CFL, INC max 1x75W (E26/A19)

silver grey

2m

90°

-90°

22 Diffused

1m

89

120V line voltage

62 102 122

142 0m

177 cd

T051408

FLU 1x18W (G24d-2)

white

T051438

FLU 1x18W (G24d-2)

black

T051498

FLU 1x18W (G24d-2)

silver grey

- 90°

90° 17

Diffused

86

47 77 107

120V line voltage

1m

122 0m

172 cd

66

lux

2m

lux


Giasole

WALL / CEILING / FLOOR 5 15/16” 15 cm

6 1/8” 15,5 cm

41 3/4” 106 cm

Giasole UNILATERAL FLOOR code

For unilateral floor T051338 model, please order one head and a flanged pole T051398 IP54

lamping

finish

LED. CFL, INC max 1x75W (E26/A19) - one head

black

LED, CFL, INC max 1x75W (E26/A19) - one head

silver grey

3m

90°

-90°

10

Diffused

120V line voltage

89

1.5 cm

35 110 185 235 0m

177 cd

T051438

FLU 1x18W (G24d-2) - one head

black

T051498

FLU 1x18W (G24d-2) - one head

silver grey

- 90°

90°

Diffused

120V line voltage

15

86

1.5 cm 65 140 190 240 0m

172 cd

T053400

Flanged pole

black

T053490

Flanged pole

silver grey

lux

3m

lux

67


WALL / FLOOR

Hila design by Carlo Colombo

SERIES OF LIGHT FIXTURES WITH DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. HILA WALL • COMPOSED

OF LED SOURCE AND WALL SUPPORT

• GREY

WHITE (RAL9002) FINISH

• LAMP

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• UV

RESISTANT DIFFUSER IN SHOCK RESISTANT POLYCARBONATE WITH SATIN FINISH, PROVIDED WITH HIGH-EFFICIENCY LIGHT-DIFFUSING LENSES

• PAINTING

IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• WALL

SUPPORT IN PAINTED STEEL INCLUDED

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC • PROVIDED

DRIVER INTEGRATED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

68


Hila

WALL / FLOOR

HILA FLOOR • COMPOSED

OF LED SOURCE, SUPPORT POLE AND GROUND MOUNTING PLATE

• GREY

WHITE (RAL9002) FINISH

• LAMP

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• UV

RESISTANT DIFFUSER IN SHOCK RESISTANT POLYCARBONATE WITH SATIN FINISH, PROVIDED WITH HIGH-EFFICIENCY LIGHT-DIFFUSING LENSES

• SUPPORT

POLE : 35 7/16” (90 cm) HIGH IN EXTRUDED EN-AW-6060 ALUMINUM, CHROMATE TREATED AND PAINTED

• MOUNTING

PLATE IN PAINTED STEEL, WITH HOLES FOR GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS; INCLUDED

• PAINTING

IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED

• PROVIDED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

69


Hila

WALL / FLOOR

Hila FLOOR

Lighting application

LED 13W

70

h

L

a

Em

Emax

Emin

0,9 m

1,0 m

3,2 m

117 lux

222 lux

39 lux

35”

39”

126”

10.9 fc

20.6 fc

3.6 fc

Danese Milano, Milan (Italy)


Hila

WALL / FLOOR Hila wall 14 9/16” 37 cm 6 5/16” 16 cm

11” 28 cm 3 9/16” 9 cm

Hila WALL

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption lumens

CCT

CRI

T085808

10 LED

26W

4000K

85

1260lm

finish

grey white

-90°

Electronic driver integrated

90° 160

Asymm. Wide Flood

318 479 638 cd

Hila floor 14 9/16” 37 cm 6 5/16” 16 cm

35 7/16” 90 cm

3 1/8” 8 cm

Hila FLOOR

IP65 Tested in accordance with IES LM-79-08

code

lamping

power consumption lumens

CCT

CRI

T085708

10 LED

13W

4000K

85

714lm

finish

grey white

-90°

Electronic driver integrated

4m

90° 92

Asymm. Wide Flood

10

20 40 60 70

188 202

80

377 cd

90

0m lux

71


FLOOR

Ippolito design by Alessandro Pedretti (Studio Rota & Partners)

LIGHT FIXTURE WITH DIRECT EMISSION AND HIGH-PERFORMANCE MONOCHROMATIC LED LIGHT SOURCES. • FLOOR

INSTALLATION

• AVAILABLE

IN 2 SIZES: 17 11/16” (45 cm) AND 35 7/16” (90 cm)

• CYLINDRICAL

LAMP SUPPORT IN ENGINEERING POLYMER (COMPACT POLYURETHANE), REINFORCED WITH CO-MOLDED GALVANIZED STEEL ELEMENTS. PAINTED WITH POLYURETHANE RESISTANT TO ATMOSPHERIC AND CHEMICAL AGENTS

• LAMP

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM, PAINTED WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• UV

RESISTANT DIFFUSER IN TRANSPARENT SHOCK RESISTANT POLYCARBONATE

72

• POWER

SUPPLY COMPARTMENT IN POLYMERS WITH CLOSURE COVER IN AISI 316 STAINLESS STEEL

• HOT

GALVANIZED STEEL MOUNTING PLATE, WITH HOLES FOR GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• PROVIDED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Ippolito

FLOOR

17 11/16” 45 cm

ø 7 7/8” ø 20 cm

Ippolito 45

IP65

code

lamping

power consumption

lumens

T085108

1 LED COB

14.9W

1050lm 3000K

CCT

CRI

finish

80

anth. grey / light grey

Electronic driver integrated

Asymm.

35 7/16” 90 cm

ø 7 7/8” ø 20 cm

Ippolito 90

IP65

code

lamping

power consumption

lumens

T085008

1 LED COB

14.9W

1050lm 3000K

Electronic driver integrated

CCT

CRI

finish

80

anth. grey / light grey Asymm.

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

73


FLOOR

LineaLed drive-over Design by Carlotta de Bevilacqua

RECESSED LIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES. • DRIVE-OVER • DRIVE

RECESSED FLOOR INSTALLATION

OVER APPROVED UP TO 11023 LBS (5000 KG)

• AVAILABLE

IN 2 LENGTHS 24 5/16” (61,8cm), 38 1/2” (97,8cm)

• FLOOR

RECESSING BOX IN STEEL

• ELECTRICAL

CONNECTION TO THE DRIVER BY MEANS OF 39 3/8” (100 cm) LONG 2-POLE CABLE, WITH IP68 ­ QUICK-RELEASE TERMINAL BLOCK WHICH IS SUPPLIED WITH THE FIXTURE AND CAN BE HOUSED IN THE RECESSING BOX

• BODY

IN EXTRUDED EN AW6060 T5 ALUMINUM

• END

CAPS IN INJECTION-MOLDED POLYCARBONATE WITH SILICONE GASKET

• 5/16”

(8 mm)-THICK OPAL NON-SLIPPERY TEMPERED GLASS

• GLASS

SURFACE TEMPERATURE LOWER THAN 95°F (35°C)

• RECESSING

BOX FOR LAYING IN AISI 304 STAINLESS STEEL

• END

CAPS AND ACCESSORIES FOR SERIES CONNECTION (TO BE ORDERED SEPARATELY)

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• 24V

DC SUPPLY REQUIRED (REMOTE DRIVER SOLD SEPARATELY)

74

• BODY

FASTENED TO THE RECESSING BOX BY MEANS OF PROPER PRE-STRESSED STEEL SPRINGS SUPPLIED WITH THE FIXTURE

• PAINTED

PROFILE WITH 2-STAGE OUTDOOR TREATMENT: PRIMER, OUTDOOR PAINT

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES: ··WARM=3000K / NEUTRAL=4000K.

• LINEALED

60: CONNECT A MAXIMUM NUMBER OF 16 FIXTURES IN A CONTINUOUS LINE

• LINEALED

100: CONNECT A MAXIMUM NUMBER OF 10 FIXTURES IN A CONTINUOUS LINE

• INSTALLATION

MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS


LineaLed

FLOOR 1 9/16” 3,95 cm 1 11/16” 4,25 cm 1 7/8” 4,75 cm 24 5/16” - 38 1/2” 61,8 cm - 97,8 cm

LineaLed DRIVE-OVER code

IP67

lamping

power consumption

lumens

CCT

CRI

2 9/16” 6,5 cm

finish

Linealed drive-over - L=24 5/16” (61,8 cm) NL7398VSK0UL

LED

5W

270lm

3000K 80

aluminum

NL7398VSW0UL

LED

5W

300lm

4000K 80

aluminum

Wide flood

24V DC remote driver not included Linealed drive-over - L= 38 1/2” (97,8 cm) NL7419VSK0UL

LED

8W

432lm

3000K 80

aluminum

NL7419VSW0UL

LED

8W

480lm

4000K 80

aluminum

24V DC remote driver not included Linealed parts NL76670

Recessing box - L=24 1/2” (62,2 cm)

NL76680

Recessing box - L=38 11/16” (98,2 cm)

NL75810

Connection bracket for recessed housing

NL74890

1/16” (1,5mm)-thick end cap for recessed housing (Pair)

NL19052UL

Power feed connector and connector end cap

LineaLed

Recessing box

0.06” (1,5mm)-thick end cap for recessed housing

LineaLed

End cap for recessed housing

Recessing box

Connection bracket for recessed housing

End cap for recessed housing

Power feed connector and connector end cap

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

75


WALL / FLOOR

Minispot

LIGHT FIXTURE WITH ADJUSTABLE DIRECT EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCE. • GROUND,

FLOOR OR WALL INSTALLATION

• COMPOSED

BY BODY, METAL RING AND DIFFUSER IN TRANSPARENT POLYCARBONATE

• BODY

AND METAL RING IN COMPUTER NUMERICAL CONTROL MACHINED BILLET ANTICORODAL ALUMINUM

• SPOT

PAINTED WITH 2-STAGE OUTDOOR TREATMENT : PRIMER, OUTDOOR PAINT

• SILICONE • 39

GASKETS

3/8” (100 cm) LONG 2-POLE CONNECTION CABLE

• FIXED

OPTIC. PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS: SPOT, FLOOD OR WIDE FLOOD

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

• PICKET

FOR GROUND INSTALLATION IN GALVANIZED IRON INCLUDED

• INSTALLATION

MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• 700mA

76

SUPPLY REQUIRED (REMOTE DRIVER SOLD SEPARATELY)


Minispot

WALL / FLOOR

Ground installation spike 1 7/16” 3,7 cm

1 5/16” 3,3 cm

3 15/16” 10 cm

7” 18 cm 1 3/16” 3 cm

Minispot code

IP65

lamping

power consumption lumens CCT

CRI beam

13/16” 2 cm

finish

Spot beam NL702910K0UL

1 LED

3W

75lm

3000K 80 10°

silver grey

NL702910W0UL

1 LED

3W

80lm

4000K 80 10°

silver grey

Spot

700mA remote driver not included

Flood beam NL702925K0UL 1 LED

3W

75lm

3000K 80 25°

silver grey

NL702925W0UL 1 LED

3W

80lm

4000K 80 25°

silver grey

Flood

700mA remote driver not included

Wide flood beam NL7029ELK0UL 1 LED

3W

75lm

3000K 80 25ºx45º

silver grey

NL7029ELW0UL 1 LED

3W

80lm

4000K 80 25ºx45º

silver grey

Wide flood

700mA remote driver not included

Accessory NL97150UL

Ground installation spike

Private residence Milan (It) Project :Erna Corbetta Photo: Beppe Raso

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

77


WALL

Molla design by Ernesto Gismondi

LIGHT FIXTURE WITH 2 LIGHT SOURCES : THE LARGE ONE WITH LIGHTING FUNCTION AND THE NARROW ONE WITH DECORATIVE FUNCTION. • WALL

INSTALLATION. THE FIXTURE CAN BE INSTALLED WITH THE LARGE BEAM POINTED EITHER DOWNWARDS OR UPWARDS ACCORDING TO THE KIND OF LIGHTING DESIRED (DIRECT OR INDIRECT)

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002) OR ANTHRACITE GREY

• THE

LARGE BEAM IS OBTAINED BY THE COMBINATION OF A MONOCHROMATIC LED LIGHT SOURCE WITH A REFLECTOR. THE NARROW BEAM IS OBTAINED BY THE COMBINATION OF A MONOCHROMATIC LED LIGHT SOURCE WITH A HIGH-PERFORMANCE PROJECTOR

• COMPOSED

BY LIGHTING CAP UNIT AND TERMINAL BOARD FIXED TOGETHER BY MEANS OF LOCKING SCREWS

• CAP

AND TERMINAL BOARD IN DIE-CAST EN AB-47100 ALUMINUM

• WATERTIGHT

78

GASKET IN SILICONE RUBBER

• PROJECTOR

COMPOSED BY A BODY IN REINFORCED POLYMER AND PMMA LENSES

• TEMPERED

AND SILKSCREENED LIGHT-DIFFUSING GLASSES, SILICONED FLUSH WITH THE LIGHTING CAP

• WALL

FIXING BY MEANS OF A BRACKET IN FOLDED STEEL SHEET TO WHICH THE FIXTURE IS FASTENED WITH 2 SCREWS

• LOCKING

SCREWS USED OUTSIDE THE FIXTURE IN AISI 316 STAINLESS STEEL

• DIE-CAST

ALUMINUM AND BRACKET PAINTED WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Molla

WALL

9” 22,9 cm

6 3/8” 16,3 cm

Molla code

IP65

power emission lamping consumption lumens

CCT

CRI beam finish

indirect 1 LED T4190NLW08 direct 1 LED

10W 2W

3000K 82 90° 407lm 3000K 80 8°

grey white

T4190NLW18

indirect 1 LED direct 1 LED

10W 2W

407lm

3000K 82 90° 3000K 80 8°

anth. grey

T4190NLN08

indirect 1 LED direct 1 LED

10W 2W

463lm

4000K 80 90° 4000K 75 8°

grey white

indirect 1 LED direct 1 LED

10W 2W

4000K 80 90° 463lm 4000K 75 8°

anth. grey

T4190NLN18

4 3/16” 10,6 cm

-30°

2683

30°

2013

Double emission Spot/ Wide flood

1342 671 -90° 3000K

90° cd

Electronic driver integrated

79


FLOOR

Naiade drive-over design by Ernesto Gismondi

RECESSED LIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES. • RECESSED

FLOOR INSTALLATION WITH 3 SIZES: 2 3/16” (5,5 cm), 3 9/16” (9 cm), 5 7/8” (15 cm)

• DRIVE

OVER APPROVED UP TO 11,023 LBS (5.000 KG)

• ROUND

AND SQUARE VERSIONS COMPOSED BY BODY, FRAME, BLACK SILKSCREENED TEMPERED GLASS, RECESSING BOX

• BODY

IN EN AB44100 ALUMINUM, SILICONE GASKETS; PROVIDED WITH 11 13/16” (30 cm) LONG PRE-RESINED THREE-POLE CONNECTION CABLE

• ROUND

OR SQUARE FRAME IN 0.1” (3 mm) THICK STAINLESS STEEL

• FIXING

TO THE RECESSING BOX IS ENSURED BY MEANS OF ANTI-VANDAL TORX SCREWS

• GLASS

SURFACE TEMPERATURE LOWER THAN 104°F (40°C)

• GLASS

THICKNESS OF 0.3” (8 mm) FOR NAIADE 55, 0.4” (10 mm) FOR NAIADE 90, 0.6” (15 mm) FOR NAIADE 150

• RECESSING

BOX IN REINFORCED POLYMER

• ADJUSTABLE

OPTICS. PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS

80

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES: ··WARM=3000K / NEUTRAL=4000K

• SCREWS

IN AISI 316 STAINLESS STEEL

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT: NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• INSTALLATION

MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

• FOR

VERSIONS 55 AND 90: 24V DC SUPPLY REQUIRED (REMOTE DRIVER SOLD SEPARATELY)

• FOR

VERSION 150: ELECTRONIC DRIVER INTEGRATED. CIRCUIT OPERATION IS ASSURED ALSO IN CASE OF DAMAGE TO ONE OR SEVERAL LEDS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.


Naiade

FLOOR

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details ­avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

Round or square frame in stainless steel. Silkscreened tempered glass.

Lighting unit Naiade 320 shown on picture not available in North America

Recessing box Recessed depth: Naiade 55 Naiade 90 Naiade 150

3 15/16” (10 cm) 3 15/16” (10 cm) 4 3/4” (12 cm)

81


82

Milanofiori North Residential Complex Assago, Milan (IT) Architectural project : OBR - Paolo Brescia, Tommaso Principi


Naiade

FLOOR

ø 2 3/16” ø 5,5 cm 3 15/16” 10 cm

Naiade 55 DRIVE-OVER ROUND

ø 7 1/2” ø 19 cm

code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot fixed beam T403210W08

1 LED 1.5W

66lm

3000K 80 14°

stainless steel

T403210N08

1 LED 1.5W

76lm

4000K 75 14°

stainless steel

Spot fixed beam

729

H m

ØC0 m

Ø C90 m

547

3,0

0,70

0,70

81

2,5

0,59

0,59

117

2,0

0,47

0,47

182

1,5

0,35

0,35

324

1,0

0,23

0,23

728

0,5

0,12

0,12

2913

186

H m

ØC0 m

Ø C90 m

E lux

139

3,0

1,68

1,68

21

2,5

1,40

1,40

30

2,0

1,12

1,12

46

1,5

0,84

0,84

82

1,0

0,56

0,56

185

0,5

0,28

0,28

741

306

H m

ØC0 Ø C90 m m

230

3,0

0,80

1,82

34

2,5

0,67

1,52

49

2,0

0,53

1,22

76

1,5

0,40

0,91

135

1,0

0,27

0,61

304

0,5

0,13

0,30

1218

365

24V DC remote not included

182 -90°

90°

3000K

Flood fixed beam T403239W08

1 LED 1.5W

61lm

3000K 80 31°

stainless steel

T403239N08

1 LED 1.5W

70lm

4000K 75 31°

stainless steel

Flood fixed beam

cd

93

24V DC remote not included

46 -90°

90°

3000K

Elliptical wall washer fixed beam T4032ELW08

1 LED 1.5W

62lm

3000K 80 16°x34°

stainless steel

T4032ELN08

1 LED 1.5W

71lm

4000K 75 16°x34°

stainless steel

24V DC remote not included

Elliptical wall washer fixed beam

14º

cd

153 77 90°

-90° 3000K

T409908

E lux

31º

cd

E lux

16ºx34º

Recessing box 2 3/16” 5,5 cm 3 15/16” 10 cm

Naiade 55 DRIVE-OVER SQUARE

7 1/2” 19 cm

code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot fixed beam T400210W08

1 LED 1.5W

66lm

3000K 80 14°

stainless steel

T400210N08

1 LED 1.5W

76lm

4000K 75 14°

stainless steel

Spot fixed beam

729

H m

ØC0 m

Ø C90 m

547

3,0

0,70

0,70

81

2,5

0,59

0,59

117

2,0

0,47

0,47

182

1,5

0,35

0,35

324

1,0

0,23

0,23

728

0,5

0,12

0,12

2913

186

H m

ØC0 m

Ø C90 m

E lux

139

3,0

1,68

1,68

21

2,5

1,40

1,40

30

2,0

1,12

1,12

46

1,5

0,84

0,84

82

1,0

0,56

0,56

185

0,5

0,28

0,28

741

306

H m

ØC0 Ø C90 m m

230

3,0

0,80

1,82

34

2,5

0,67

1,52

49

2,0

0,53

1,22

76

1,5

0,40

0,91

135

1,0

0,27

0,61

304

0,5

0,13

0,30

1218

365

24V DC remote not included

182 -90°

90°

3000K

Flood fixed beam T400239W08

1 LED 1.5W

61lm

3000K 80 31°

stainless steel

T400239N08

1 LED 1.5W

70lm

4000K 75 31°

stainless steel

Flood fixed beam

cd

93

24V DC remote not included

46 -90°

90°

3000K

Elliptical wall washer fixed beam T4002ELW08

1 LED 1.5W

62lm

3000K 80 16°x34°

stainless steel

T4002ELN08

1 LED 1.5W

71lm

4000K 75 16°x34°

stainless steel

24V DC remote not included

Elliptical wall washer fixed beam

77 -90° 3000K

T409908

14º

cd

153

90° cd

E lux

31º

E lux

16ºx34º

Recessing box

83


Naiade

FLOOR ø 3 9/16” ø 9 cm 3 15/16” 10 cm

Naiade 90 DRIVE-OVER ROUND

ø 7 1/2” ø 19 cm

code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam T403310W08

3 LED 3.5W

176lm 3000K 80 9°

stainless steel

T403310N08

3 LED 3.5W

201lm 4000K 75 9°

stainless steel

24V DC remote driver not included

Spot adjustable beam +0° -8°

4318

H m

ØC0 m

Ø C90 m

E lux

3239

3,0

0,48

0,48

480

2,5

0,40

0,40

691

2,0

0,32

0,32

1080

1,5

0,24

0,24

1919

1,0

0,16

0,16

0,5

0,08

0,08

4318 17273

2159 1080 90°

-90° 3000K

cd

Flood adjustable beam T403339W08

3 LED 3.5W

143lm 3000K 80 24°

stainless steel

T403339N08

3 LED 3.5W

164lm 4000K 75 24°

stainless steel

24V DC remote driver not included

Wall washer adjustable beam T4033ELW08

3 LED 3.5W

160lm 3000K 80 28°

stainless steel

T4033ELN08

3 LED 3.5W

183lm 4000K 75 28°

stainless steel

24V DC remote driver not included

Wall washer adjustable beam +0° -8°

506

H m

ØC0 Ø C90 m m

380

3,0

1,50

1,50

2,5

1,25

1,25

81

2,0

1,00

1,00

126

1,5

0,75

0,75

225

1,0

0,50

0,50

0,5

0,25

0,25

505 2002

253 127 90°

-90° 3000K

T409907

E lux 56

cd

28º

Recessing box 3 9/16” 9 cm 3 15/16” 10 cm

Naiade 90 DRIVE-OVER SQUARE

7 1/2” 19 cm

code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam T400310W08

3 LED 3.5W

176lm 3000K 80 9°

stainless steel

T400310N08

3 LED 3.5W

201lm 4000K 75 9°

stainless steel

24V DC remote driver not included

Spot adjustable beam +0° -8°

4318

H m

ØC0 m

Ø C90 m

E lux

3239

3,0

0,48

0,48

480

2,5

0,40

0,40

691

2,0

0,32

0,32

1080

1,5

0,24

0,24

1919

1,0

0,16

0,16

0,5

0,08

0,08

4318 17273

606

H m

ØC0 Ø C90 m m

E lux

455

3,0

1,30

1,30

67

2,5

1,08

1,08

97

2,0

0,86

0,86

151

1,5

0,65

0,65

269

1,0

0,43

0,43

0,5

0,22

0,22

604 2417

2159 1080 90°

-90° 3000K

Flood adjustable beam T400339W08

3 LED 3.5W

143lm 3000K 80 24°

stainless steel

T400339N08

3 LED 3.5W

164lm 4000K 75 24°

stainless steel

24V DC remote driver not included

Flood adjustable beam +0° -8°

303 152 -90° 3000K

Wall washer adjustable beam T4003ELW08

3 LED 3.5W

160lm 3000K 80 28°

stainless steel

T4003ELN08

3 LED 3.5W

183lm 4000K 75 28°

stainless steel

24V DC remote driver not included

T409907

84

Recessing box

cd

90° cd

24º


Naiade

FLOOR ø 5 7/8” ø 15 cm 4 3/4” 12 cm

Naiade 150 DRIVE-OVER ROUND

ø 10 3/16” ø 26 cm

code

IP67 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam T403610W08

4 LED 7.5W

167lm 3000K 80 6°

stainless steel

T403610N08

4 LED 7.5W

190lm 4000K 75 6°

stainless steel

Electronic driver integrated

Spot adjustable beam +/- 15°

7150

H m

Ø C0 m

Ø C90 m

5363

3,0

0,36

0,36

794

2,5

0,30

0,30

1144

2,0

0,24

0,24

1788

1,5

0,18

0,18

3178

1,0

0,12

0,12

7150

0,5

0,06

0,06

28601

644

H m

ØC0 Ø C90 m m

483

3,0

1,90

1,90

71

2,5

1,59

1,59

103

2,0

1,27

1,27

160

1,5

0,95

0,95

285

1,0

0,63

0,63

642

0,5

0,32

0,32

2568

2250

H m

ØC0 Ø C90 m m

1687

3,0

2,68

0,38

245

2,5

2,24

0,31

353

2,0

1,79

0,25

551

1,5

1,34

0,19

980

1,0

0,89

0,13

2204

0,5

0,45

0,06

3575 1788 90°

-90° 3000K

Flood adjustable beam T403639W08

4 LED 7.5W

249lm 3000K 80 34°

stainless steel

T403639N08

4 LED 7.5W

285lm 4000K 75 34°

stainless steel

Electronic driver integrated

Flood adjustable beam +/- 15°

cd

322 161 -90°

90°

3000K

Elliptical wall washer adjustable beam T4036ELW08

4 LED 7.5W

287lm 3000K 80 7°x48°

stainless steel

T4036ELN08

4 LED 7.5W

328lm 4000K 75 7°x48°

stainless steel

Electronic driver integrated

Elliptical wall washer adjustable beam +/- 15°

562 -90°

90°

3000K

T409905

cd

1125

E lux

E lux

36º

cd

E lux

8816 7ºx48º

Recessing box 5 7/8” 15 cm 4 3/4” 12 cm

Naiade 150 DRIVE-OVER SQUARE

10 3/16” 26 cm

code

IP67 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam T400610W08

4 LED 7.5W

167lm 3000K 80 6°

stainless steel

T400610N08

4 LED 7.5W

190lm 4000K 75 6°

stainless steel

Electronic driver integrated

Spot adjustable beam +/- 15°

7150

H m

Ø C0 m

Ø C90 m

5363

3,0

0,36

0,36

794

2,5

0,30

0,30

1144

2,0

0,24

0,24

1788

1,5

0,18

0,18

3178

1,0

0,12

0,12

7150

0,5

0,06

0,06

28601

644

H m

ØC0 Ø C90 m m

483

3,0

1,90

1,90

71

2,5

1,59

1,59

103

2,0

1,27

1,27

160

1,5

0,95

0,95

285

1,0

0,63

0,63

642

0,5

0,32

0,32

2568

2250

H m

ØC0 Ø C90 m m

E lux

1687

3,0

2,68

0,38

245

2,5

2,24

0,31

353

2,0

1,79

0,25

551

1,5

1,34

0,19

980

1,0

0,89

0,13

2204

0,5

0,45

0,06

3575 1788 90°

-90° 3000K

Flood adjustable beam T400639W08

4 LED 7.5W

249lm 3000K 80 34°

stainless steel

T400639N08

4 LED 7.5W

285lm 4000K 75 34°

stainless steel

Electronic driver integrated

Flood adjustable beam +/- 15°

cd

322 161 -90°

90°

3000K

Elliptical wall washer adjustable beam T4006ELW08

4 LED 7.5W

287lm 3000K 80 7°x48°

stainless steel

T4006ELN08

4 LED 7.5W

328lm 4000K 75 7°x48°

stainless steel

Electronic driver integrated

Elliptical wall washer adjustable beam +/- 15°

562 -90° 3000K

T409906

cd

1125

90° cd

E lux

E lux

36º

8816 7ºx48º

Recessing box

85


CEILING

Naiade downlight design by Ernesto Gismondi

DOWNLIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES. • RECESSED

CEILING INSTALLATION

• AVAILABLE

IN 3 SIZES: 2 3/16” (5,5 cm), 3 9/16” (9 cm), 5 7/8” (15 cm)

• ROUND

AND SQUARE VERSION

• COMPOSED

BY BODY, FRAME AND BLACK SILKSCREENED TEMPERED GLASS

• BODY

IN EN AB44100 ALUMINUM, SILICONE GASKETS; PROVIDED WITH 11 13/16” (30 cm) LONG PRE-RESINED THREE-POLE CONNECTION CABLE

• ROUND

OR SQUARE FRAME IN 0.1” (3 mm) THICK STAINLESS STEEL OR ALUMINUM PAINTED IN GREY WHITE (RAL9002)

• INSTALLATION

WITH BUILT-IN SPRINGS

• ADJUSTABLE

OPTICS.PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS

• GLASS • GLASS

SURFACE TEMPERATURE LOWER THAN 104°F (40°C)

THICKNESS OF 0.3” (8 mm) FOR NAIADE 55, 0.4” (10MM) FOR NAIADE 90, 0.6” (15 mm) FOR NAIADE 150

86

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES: ··WARM=3000K / NEUTRAL=4000K

• SCREWS

IN AISI 316 STAINLESS STEEL

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT: NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• INSTALLATION

MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

• FOR

VERSIONS 90 AND 55: 24V DC SUPPLY REQUIRED (REMOTE DRIVER SOLD SEPARATELY)

• FOR

VERSION 150: ELECTRONIC DRIVER INTEGRATED. CIRCUIT OPERATION IS ASSURED ALSO IN CASE OF DAMAGE TO ONE OR SEVERAL LEDS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.


Naiade

ceiling

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details ­avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

Built-in springs

Naiade 55 downlight Recessed depth : 3 11/16” (9,4 cm)

Naiade 90 downlight Recessed depth : 3 1/8” (9 cm)

Naiade 150 downlight Recessed depth : 4 3/4” (12 cm)

Cut-out dimensions:

Cut-out dimensions:

Cut-out dimensions:

ø 1 7/8” (4,7 cm) ± 0.04” (1 mm)

ø 3 1/8” (8 cm) ± 0.08” (2 mm)

ø 5 5/16” (13,5 cm) ± 0.08” (2 mm)

1 7/8” (4,7 cm) ± 0.04” (1 mm)

3 1/8” (8 cm) ± 0.08” (2 mm)

5 5/16” (13,5 cm) ± 0.08” (2 mm)

87


88

Milanofiori North Residential Complex Assago, Milan (IT) Architectural project : OBR - Paolo Brescia, Tommaso Principi


Naiade

ceiling

3 11/16” 9,4 cm

Naiade 55 DOWNLIGHT ROUND code

IP65 IK10

ø 1 7/8” ± 0.04” ø 4,7 cm ± 1 mm

ø 2 3/16” ø 5,5 cm

power lamping consumption lumens CCT

CRI beam

finish

Spot fixed beam

90°

T408110W08

1 LED 1.5W

66lm

3000K 80 14°

grey white

T408010W08

1 LED 1.5W

66lm

3000K 80 14°

stainless steel

T408110N08

1 LED 1.5W

76lm

4000K 75 14°

grey white

T408010N08

1 LED 1.5W

76lm

4000K 75 14°

stainless steel

182 Spot fixed beam

365 547 729

24V DC remote driver not included 3000K

Flood fixed beam T408139W08

1 LED 1.5W

61lm

3000K 80 31°

grey white

1 LED 1.5W

61lm

3000K 80 31°

stainless steel

T408139N08

1 LED 1.5W

70lm

4000K 75 31°

grey white

T408039N08

1 LED 1.5W

70lm

4000K 75 31°

stainless steel

-90° 46

Flood fixed beam

93 139 186

24V DC remote driver not included 3000K

Elliptical wall washer fixed beam T4081ELW08

1 LED 1.5W

62lm

3000K 80 16°x34°

grey white

1 LED 1.5W

62lm

3000K 80 16°x34°

stainless steel

T4081ELN08

1 LED 1.5W

71lm

4000K 75 16°x34°

grey white

1 LED 1.5W

71lm

4000K 75 16°x34°

-90° 77

Elliptical wall washer fixed beam

153

stainless steel

24V DC remote driver not included

Ø C90 m

E lux

0,5

0,12

0,12

1,0

0,23

0,23

728

1,5

0,35

0,35

324

2,0

0,47

0,47

182

2,5

0,59

0,59

117

3,0

0,70

0,70

81

H m

ØC0 m

Ø C90 m

E lux

0,5

0,28

0,28

741

1,0

0,56

0,56

185

1,5

0,84

0,84

82

2,0

1,12

1,12

46

2,5

1,40

1,40

30

3,0

1,68

1,68

21

H m

ØC0 Ø C90 m m

0,5

0,13

0,30

1,0

0,27

0,61

1218 304

2913

14º

cd

90°

T4080ELW08

ØC0 m

cd

90°

T408039W08

T4080ELN08

H m

-90°

31º

E lux

1,5

0,40

0,91

135

230

2,0

0,53

1,22

76

2,5

0,67

1,52

49

306

3,0

0,80

1,82

34

3000K

cd

16ºx34º

3 11/16” 9,4 cm

Naiade 55 DOWNLIGHT SQUARE code

IP65 IK10

□ 1 7/8” ± 0.04” □ 4,7 cm ± 1 mm

2 3/16” 5,5 cm

power lamping consumption lumens CCT

CRI beam

finish

Spot fixed beam

90°

T406110W08

1 LED 1.5W

66lm

3000K 80 14°

grey white

T406010W08

1 LED 1.5W

66lm

3000K 80 14°

stainless steel

T406110N08

1 LED 1.5W

76lm

4000K 75 14°

grey white

T406010N08

1 LED 1.5W

76lm

4000K 75 14°

stainless steel

182 Spot fixed beam

365 547 729

24V DC remote driver not included 3000K

Flood fixed beam T406139W08

1 LED 1.5W

61lm

3000K 80 31°

grey white

1 LED 1.5W

61lm

3000K 80 31°

stainless steel

T406139N08

1 LED 1.5W

70lm

4000K 75 31°

grey white

T406039N08

1 LED 1.5W

70lm

4000K 75 31°

stainless steel

-90° 46

Flood fixed beam

93 139 186

24V DC remote driver not included 3000K

Elliptical wall washer fixed beam T4061ELW08

1 LED 1.5W

62lm

3000K 80 16°x34°

grey white

1 LED 1.5W

62lm

3000K 80 16°x34°

stainless steel

T4061ELN08

1 LED 1.5W

71lm

4000K 75 16°x34°

grey white

1 LED 1.5W

71lm

4000K 75 16°x34°

-90° 77

Elliptical wall washer fixed beam

153

stainless steel

24V DC remote driver not included 3000K

Ø C90 m

E lux

0,5

0,12

0,12

1,0

0,23

0,23

728

1,5

0,35

0,35

324

2,0

0,47

0,47

182

2,5

0,59

0,59

117

3,0

0,70

0,70

81

H m

ØC0 m

Ø C90 m

E lux

0,5

0,28

0,28

741

1,0

0,56

0,56

185

1,5

0,84

0,84

82

2,0

1,12

1,12

46

2,5

1,40

1,40

30

3,0

1,68

1,68

21

H m

ØC0 Ø C90 m m

0,5

0,13

0,30

1,0

0,27

0,61

1218 304

2913

14º

cd

90°

T4060ELW08

ØC0 m

cd

90°

T406039W08

T4060ELN08

H m

-90°

31º

E lux

1,5

0,40

0,91

135

230

2,0

0,53

1,22

76

2,5

0,67

1,52

49

306

3,0

0,80

1,82

34

cd

16ºx34º

89


Naiade

ceiling

3 9/16” 9 cm

Naiade 90 DOWNLIGHT ROUND code

IP65 IK10

ø 3 1/8” ± 0.08” ø 8 cm ± 2 mm

ø 3 9/16” ø 9 cm

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam T408310W08

3 LED 3.5W

176lm 3000K 80 9°

grey white

T408210W08

3 LED 3.5W

176lm 3000K 80 9°

stainless steel

T408310N08

3 LED 3.5W

201lm 4000K 75 9°

grey white

T408210N08

3 LED 3.5W

201lm 4000K 75 9°

H m

ØC0 m

Ø C90 m

0,5

0,08

0,08

17273

1,0

0,16

0,16

4318

1,5

0,24

0,24

1919

2,0

0,32

0,32

1080

2,5

0,40

0,40

691

3,0

0,48

0,48

480

H m

ØC0 Ø C90 m m

0,5

0,22

0,22

2417

1,0

0,43

0,43

604

1,5

0,65

0,65

269

455

2,0

0,86

0,86

151

606

2,5 3,0

1,08

1,08

1,30

1,30

97 67

H m

ØC0 Ø C90 m m

0,5

0,25

0,25

2002

1,0

0,50

0,50

505

1,5

0,75

0,75

225

2,0

1,00

1,00

126

2,5

1,25

1,25

81

3,0

1,50

1,50

56

-90°

90° 1080 Spot adjustable beam +0° -8°

2159 3239

stainless steel

4318

24V DC remote driver not included 3000K

Flood adjustable beam

cd

-90°

90°

T408339W08

3 LED 3.5W

143lm 3000K 80 24°

grey white

T408239W08

3 LED 3.5W

143lm 3000K 80 24°

stainless steel

T408339N08

3 LED 3.5W

164lm 4000K 75 24°

grey white

T408239N08

3 LED 3.5W

164lm 4000K 75 24°

stainless steel

152 Flood adjustable beam +0° -8°

303

24V DC remote driver not included 3000K

Wall washer adjustable beam T4083ELW08

3 LED 3.5W

160lm 3000K 80 28°

grey white

T4082ELW08

3 LED 3.5W

160lm 3000K 80 28°

stainless steel

-90°

T4083ELN08

3 LED 3.5W

183lm 4000K 75 28°

grey white

T4082ELN08

3 LED 3.5W

183lm 4000K 75 28°

stainless steel

127 Wall washer adjustable beam +0° -8°

253 380 506

24V DC remote driver not included

cd

90°

3000K

E lux

E lux

24º

cd

E lux

28º

3 9/16” 9 cm

Naiade 90 DOWNLIGHT SQUARE code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam T406310W08

3 LED 3.5W

176lm 3000K 80 9°

grey white

3 LED 3.5W

176lm 3000K 80 9°

stainless steel

T406310N08

3 LED 3.5W

201lm 4000K 75 9°

grey white

3 LED 3.5W

201lm 4000K 75 9°

H m

ØC0 m

Ø C90 m

0,5

0,08

0,08

17273

1,0

0,16

0,16

4318

1,5

0,24

0,24

1919

2,0

0,32

0,32

1080

2,5

0,40

0,40

691

3,0

0,48

0,48

480

H m

ØC0 Ø C90 m m

0,5

0,22

0,22

2417

1,0

0,43

0,43

604

1,5

0,65

0,65

269

455

2,0

0,86

0,86

151

606

2,5 3,0

1,08

1,08

1,30

1,30

97 67

H m

ØC0 Ø C90 m m

0,5

0,25

0,25

2002

1,0

0,50

0,50

505

1,5

0,75

0,75

225

2,0

1,00

1,00

126

2,5

1,25

1,25

81

3,0

1,50

1,50

56

-90°

90°

T406210W08 T406210N08

1080 Spot adjustable beam +0° -8°

2159 3239

stainless steel

4318

24V DC remote driver not included 3000K

Flood adjustable beam

cd

-90°

90°

T406339W08

3 LED 3.5W

143lm 3000K 80 24°

grey white

T406239W08

3 LED 3.5W

143lm 3000K 80 24°

stainless steel

T406339N08

3 LED 3.5W

164lm 4000K 75 24°

grey white

T406239N08

3 LED 3.5W

164lm 4000K 75 24°

stainless steel

152 Flood adjustable beam +0° -8°

303

24V DC remote driver not included 3000K

Wall washer adjustable beam

-90°

T4063ELW08

3 LED 3.5W

160lm 3000K 80 28°

grey white

T4062ELW08

3 LED 3.5W

160lm 3000K 80 28°

stainless steel

T4063ELN08

3 LED 3.5W

183lm 4000K 75 28°

grey white

T4062ELN08

3 LED 3.5W

183lm 4000K 75 28°

stainless steel

127 Wall washer adjustable beam +0° -8°

253 380 506 3000K

cd

E lux

cd

90°

24V DC remote driver not included

90

□ 3 1/8”± 0.08” □ 8 cm ± 2 mm

3 9/16” 9 cm

E lux

24º

E lux

28º


Naiade

ceiling

4 11/16” 12 cm

Naiade 150 DOWNLIGHT ROUND

ø 5 7/8” ø 15 cm

code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam

-90°

90°

T408510W08

4 LED 7.5W

167lm 3000K 80 6°

grey white

T408410W08

4 LED 7.5W

167lm 3000K 80 6°

stainless steel

T408510N08

4 LED 7.5W

190lm 4000K 75 6°

grey white

T408410N08

4 LED 7.5W

190lm 4000K 75 6°

stainless steel

1788 Spot adjustable beam +/- 15°

3575 5363 7150

Electronic driver integrated 3000K

Flood adjustable beam 4 LED 7.5W

249lm 3000K 80 34°

grey white

T408439W08

4 LED 7.5W

249lm 3000K 80 34°

stainless steel

T408539N08

4 LED 7.5W

285lm 4000K 75 34°

grey white

T408439N08

4 LED 7.5W

285lm 4000K 75 34°

stainless steel

90° 161

Flood adjustable beam +/- 15°

322 483 644

Electronic driver integrated 3000K

Elliptical wall washer adjustable beam T4085ELW08

4 LED 7.5W

287lm 3000K 80 7°x48°

grey white

4 LED 7.5W

287lm 3000K 80 7°x48°

stainless steel

T4085ELN08

4 LED 7.5W

328lm 4000K 75 7°x48°

grey white

4 LED 7.5W

328lm 4000K 75 7°x48°

stainless steel

90° 562

Elliptical wall washer adjustable beam +/- 15°

1125 1687 2250

Electronic driver integrated

Ø C0 m

Ø C90 m

0,5

0,06

0,06

1,0

0,12

0,12

7150

1,5

0,18

0,18

3178

2,0

0,24

0,24

1788

2,5

0,30

0,30

1144

3,0

0,36

0,36

794

H m

ØC0 Ø C90 m m

3000K

E lux

0,5

0,32

0,32

2568

1,0

0,63

0,63

642

1,5

0,95

0,95

285

2,0

1,27

1,27

160

2,5

1,59

1,59

103

3,0

1,90

1,90

28601

cd

-90°

T4084ELW08

H m

cd

-90°

T408539W08

T4084ELN08

ø 5 5/16”± 0.08” ø 13,5 cm ± 2 mm

E lux

71 36º

H m

ØC0 Ø C90 m m

0,5

0,45

0,06

8816

1,0

0,89

0,13

2204

1,5

1,34

0,19

980

2,0

1,79

0,25

551

2,5 3,0

2,24 2,68

0,31 0,38

353 245

cd

E lux

7ºx48º

4 11/16” 12 cm

Naiade 150 DOWNLIGHT SQUARE

5 7/8” 15 cm

code

IP65 IK10

power lamping consumption lumens CCT

CRI beam

finish

Spot adjustable beam

-90°

90°

T406510W08

4 LED 7.5W

167lm 3000K 80 6°

grey white

T406410W08

4 LED 7.5W

167lm 3000K 80 6°

stainless steel

T406510N08

4 LED 7.5W

190lm 4000K 75 6°

grey white

T406410N08

4 LED 7.5W

190lm 4000K 75 6°

stainless steel

1788 Spot adjustable beam +/- 15°

3575 5363 7150

Electronic driver integrated 3000K

Flood adjustable beam 4 LED 7.5W

249lm 3000K 80 34°

grey white

T406439W08

4 LED 7.5W

249lm 3000K 80 34°

stainless steel

T406539N08

4 LED 7.5W

285lm 4000K 75 34°

grey white

T406439N08

4 LED 7.5W

285lm 4000K 75 34°

stainless steel

90° 161

Flood adjustable beam +/- 15°

322 483 644

Electronic driver integrated 3000K

Elliptical wall washer adjustable beam T4065ELW08

4 LED 7.5W

287lm 3000K 80 7°x48°

grey white

4 LED 7.5W

287lm 3000K 80 7°x48°

stainless steel

T4064ELN08

4 LED 7.5W 4 LED 7.5W

328lm 4000K 75 7°x48° 328lm 4000K 75 7°x48°

grey white stainless steel

90° 562

Elliptical wall washer adjustable beam +/- 15°

1125 1687 2250

Electronic driver integrated 3000K

Ø C0 m

Ø C90 m

0,5

0,06

0,06

1,0

0,12

0,12

7150

1,5

0,18

0,18

3178

2,0

0,24

0,24

1788

2,5

0,30

0,30

1144

3,0

0,36

0,36

794

H m

ØC0 Ø C90 m m

cd

E lux

0,5

0,32

0,32

2568

1,0

0,63

0,63

642

1,5

0,95

0,95

285

2,0

1,27

1,27

160

2,5

1,59

1,59

103

3,0

1,90

1,90

28601

cd

-90°

T4064ELW08

H m

cd

-90°

T406539W08

T4065ELN08

□ 5 5/16”± 0.08” □ 13,5 cm ± 2 mm

E lux

71 36º

H m

ØC0 Ø C90 m m

0,5

0,45

0,06

8816

1,0

0,89

0,13

2204

1,5

1,34

0,19

980

2,0

1,79

0,25

551

2,5 3,0

2,24 2,68

0,31 0,38

353 245

E lux

7ºx48º

91


WALL / CEILING

Niki design by Ernesto Gismondi

WALL AND CEILING LIGHT FIXTURE WITH DIFFUSED EMISSION AND HALOGEN, FLUORESCENT OR LED SOURCES. • LAMP

UNIT IN AISI 316 STAINLESS STEEL

• MOLDED

COVERING FRAME IN AISI 316 STAINLESS STEEL

• AVAILABLE • AVAILABLE

316 STAINLESS STEEL SCREWS AND POLYURETHANE SEAL GASKETS

IN 2 FINISHES: SATIN OR POLISHED

• SUITABLE

WITH 2 TYPES OF DIFFUSERS :

• FOR

··MOLDED PRISMATIC DIFFUSER IN SODIUM-CALCIUM GLASS WITH INTERNAL SATIN FINISH FOR HAL AND FLU VERSIONS OR WHITE FINISH FOR LED VERSION TO AVOID GLARING OF THE LAMPS ··MOLDED PRISMATIC SHOCK RESISTANT DIFFUSER IN OPAL UV-STABILIZED THERMOPLASTIC MATERIAL AVAILABLE FOR FLU AND LED SOURCES

92

• AISI

FOR WATERTIGHT CONNECTION

FLUORESCENT AND LED VERSIONS, ELECTRONIC BALLASTS AND DRIVERS INTEGRATED IN FIXTURE


Niki

WALL / CEILING

ø 12 1/4” ø 31,2 cm

Niki code

IP65 IK06

Prismatic glass diffuser

lamping

3 7/8” 9,8 cm

finish

Niki with prismatic glass diffuser

-90°

L221188

LED,CFL,INC max 1x75W (E26/A19)

polished

L221198

LED,CFL,INC max 1x75W (E26/A19)

satin

Diffused

90° 80

120V line voltage 160

cd

Prismatic glass diffuser

Niki FLU with prismatic glass diffuser

-90°

L220488

FLU 2x18W (G24q-2)

polished

L220498

FLU 2x18W (G24q-2)

satin

Diffused

90° 40

Electronic ballast integrated

80 120 cd

code

Prismatic white glass diffuser

lamping

power consumption lumens

CCT

CRI

finish

Niki LED with prismatic white glass diffuser

-90°

L228088

36 LED

13.3W

497lm

4000K 85

polished

L228098

36 LED

13.3W

497lm

4000K 85

satin

90° 41

Diffused

82

Electronic driver integrated IES LM-79-08 compliant

122 163

H m

ØC0 Ø C90 m m

E lux

1,0

3,26

3,26

167

2,0

6,53

6,53

42

3,0

9,79

9,79

19

4,0

13,05 13,05

5,0

16,32

10

16,32

7

H m

ØC0 Ø C90 m m

E lux

1,0

3,09

3,09

193

2,0

6,18

6,18

48

3,0

9,27

9,27

21

4,0

12,37 12,37

5,0

15,46

cd

Opal polycarbonate diffuser

code

lamping

finish

Niki FLU with opal polycarbonate diffuser

-90°

L225488

FLU 2x18W (G24q-2)

polished

L225498

FLU 2x18W (G24q-2)

satin

Diffused

90° 40

Electronic ballast integrated 80

cd

Opal polycarbonate diffuser

code

lamping

power consumption lumens

-90°

CCT

CRI

finish

51

Niki LED with opal polycarbonate diffuser L228188

36 LED

13.3W

609lm

4000K 85

polished

L228198

36 LED

13.3W

609lm

4000K 85

satin

Electronic driver integrated IES LM-79-08 compliant

90°

103 Diffused

154 206

15,46

12 8

cd

93


94


95


FLOOR

Nuda design by Ernesto Gismondi

SERIES OF LIGHT FIXTURES WITH DIRECT UNILATERAL OR BILATERAL EMISSION AND HIGH-PERFORMANCE LED LIGHT SOURCES. • AVAILABLE

IN UNILATERAL AND BILATERAL EMISSION VERSION AND IN 2 HEIGHTS 19 11/16” (50 cm) AND 39 3/8” (100 cm)

• AVAILABLE

IN 2 FINISHES: PAINTED GREY WHITE (RAL9002)

OR RUST • COMPOSED

BY LAMP, SUPPORT POLE AND GROUND MOUNTING PLATE

• LAMP

UNIT IN DIE-CAST EN-AB 47100 ALUMINUM

• UV

RESISTANT DIFFUSER IN SHOCK RESISTANT POLYCARBONATE WITH SATIN FINISH

• SPECULAR

REFLECTOR IN ALUMINUM. CONVEYS AND DIFFUSES THE LUMINOUS FLOW DOWNWARDS ENSURING VISUAL COMFORT

• SUPPORT

POLE IN EXTRUDED EN-AW-6060 ALUMINUM, CHROMATE TREATED AND PAINTED

• MOUNTING

PLATE IN FOLDED, WELDED AND PAINTED STEEL, WITH HOLES FOR GROUND FIXING BY MEANS OF LOCK BOLTS OR DOWELS; INCLUDED

• PAINTING

IS OBTAINED BY MEANS OF 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• AISI

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKET

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC • PROVIDED

DRIVER INTEGRATED

WITH IP67 CABLE AND CONNECTOR FOR THE MAIN CONNECTIONS

96


Nuda 50 UNILATERAL FLOOR

Lighting application

LED 8W h

L

a

Em

Emax

Emin

0,5 m

0,5 m

1,8 m

46 lux

176 lux

0.8 lux

20”

20”

71”

4.3 fc

16.4 fc

0.07 fc

Nuda 100 UNILATERAL FLOOR

Lighting application

LED 17W h

L

a

Em

Emax

Emin

1,0 m

1,0 m

2,5 m

22 lux

66 lux

0.3 lux

39”

39”

98”

2 fc

6.1 fc

0.03 fc

Nuda 50 BILATERAL FLOOR

Lighting application

LED 8W h

L

a

Em

Emax

Emin

0,5 m

2m

1,8 m

16 lux

83 lux

0.2 lux

20”

40”

71”

1.5 fc

7.7 fc

0.02 fc

Nuda 100 BILATERAL FLOOR

Lighting application

LED 17W h

L

a

Em

Emax

Emin

1,0 m

2,0 m

2,5 m

10 lux

32 lux

0.2 lux

39”

78”

98”

0.9 fc

3 fc

0.02 fc

97


Nuda

FLOOR Nuda 50 floor

6 5/8” 16,8 cm

1 7/8” 4,8 cm

7 11/16” 19,5 cm 5 1/8” 13 cm

Nuda 50 UNILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

19 11/16” 50 cm

mounting plate

code

lamping

power consumption lumens

CCT

CRI

T083608

6 LED

8W

180lm

3000K

80

grey white

T083618

6 LED

8W

180lm

3000K

80

rust

finish

49

Asymm.

Electronic driver integrated

10 20 40 70 90

90°

-90° 98

3m

147 196

0m cd

lux

Nuda 50

6 5/8” 16,8 cm

1 7/8” 4,8 cm

7 11/16” 19,5 cm

Nuda 50 BILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

19 11/16” 50 cm

5 1/8” 13 cm mounting plate

code

lamping

power consumption lumens

CCT

CRI

T083708

6 LED

8W

147lm

3000K

80

grey white

T083718

6 LED

8W

147lm

3000K

80

rust

Electronic driver integrated

finish 5

12

75

24

35 55

36 48

0m cd

98

1,5m

15

90°

-90°

lux


Nuda

FLOOR

6 5/8” 16,8 cm

1 7/8” 4,8 cm

39 3/8” 100 cm

7 11/16” 19,5 cm 5 1/8” 13 cm

Nuda 100 UNILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

mounting plate

code

lamping

power consumption lumens

CCT

CRI

T083808

6 LED

17W

306lm

3000K

80

grey white

T083818

6 LED

17W

306lm

3000K

80

rust

finish 15

-90°

90° 83

Asymm.

Electronic driver integrated

3m 25 35 45 55 65

167 250

5

333

0m cd

lux

Nuda 100

6 5/8” 16,8 cm

1 7/8” 4,8 cm

39 3/8” 100 cm

7 11/16” 19,5 cm 5 1/8” 13 cm

Nuda 100 BILATERAL FLOOR

IP65 Tested in accordance with IES LM-79-08

mounting plate

code

lamping

power consumption lumens

CCT

CRI

T083908

6 LED

17W

250lm

3000K

80

grey white

T083918

6 LED

17W

250lm

3000K

80

rust

Electronic driver integrated

finish 3m

5

90°

-90° 20

10 15

41

20 30 25

61 81

0m cd

lux

99


100

Service Centre of University Students, Trento (Italy) Project: Studio Palerm and Tabares de Nava s.L. Arquitectos + CLA SdS Engeneering, ing Luca Masini


101


FLOOR

Orcamo walk-over design by Ernesto Gismondi

RECESSED LIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES. • WALK-OVER • ROUND

RECESSED FLOOR INSTALLATION

AND SQUARE VERSION

• WALK-OVER

APPROVED UP TO 3,307 LBS (1.500 KG)

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

• COMPOSED

• CIRCUIT

• BODY

• SCREWS

BY BODY, BLACK SILKSCREENED GLASS FLUSH WITH THE FLOOR, RECESSING BOX IN EN AB44100 ALUMINUM, SILICONE GASKETS; PROVIDED WITH 11 13/16” (30 cm)-LONG PRE-RESINED THREE-POLE CONNECTION CABLE

• FIXING

TO THE RECESSING BOX IS ENSURED BY MEANS OF ANTI-VANDAL TORX SCREWS

• GLASS

SURFACE TEMPERATURE LOWER THAN 104°F (40°C)

• GLASS

THICKNESS OF 0.3” (8 mm)

• RECESSING

BOX IN REINFORCED POLYMER

• ADJUSTABLE

OPTICS. PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS

102

• WHITE

OPERATION IS ASSURED ALSO IN CASE OF DAMAGE TO ONE OR SEVERAL LEDS IN AISI 316 STAINLESS STEEL

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• INSTALLATION

MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Orcamo

FLOOR

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

Tempered glass flush with the floor

Lighting unit Orcamo 320 shown on picture not available in North America

Recessing box in polymer Recessed depth

5 1/8� (13 cm)

103


104

Milanofiori North Residential Complex Assago, Milan (IT) Architectural project : OBR - Paolo Brescia, Tommaso Principi


Orcamo

FLOOR ø 5 7/8” ø 15 cm 5 1/8” 13 cm

Orcamo 150 WALK-OVER ROUND

ø 10 3/16” ø 26 cm

code

IP67 IK09

lamping

power consumption

lumens

CCT

CRI beam

finish

Spot adjustable beam T411010W08

4 LED

7,5W

167lm 3000K 80 6°

black

T411010N08

4 LED

7,5W

190lm 4000K 75 6°

black

Electronic driver integrated

Spot adjustable beam +/- 15°

7150

H m

Ø C0 m

Ø C90 m

5363

3,0

0,36

0,36

794

2,5

0,30

0,30

1144

2,0

0,24

0,24

1788

1,5

0,18

0,18

3178

1,0

0,12

0,12

7150

0,5

0,06

0,06

28601

644

H m

ØC0 Ø C90 m m

483

3,0

1,90

1,90

71

2,5

1,59

1,59

103

2,0

1,27

1,27

160

1,5

0,95

0,95

285

1,0

0,63

0,63

642

0,5

0,32

0,32

2568

2250

H m

ØC0 Ø C90 m m

1687

3,0

2,68

0,38

245

2,5

2,24

0,31

353

2,0

1,79

0,25

551

1,5

1,34

0,19

980

1,0

0,89

0,13

2204

0,5

0,45

0,06

3575 1788 90°

-90° 3000K

Flood adjustable beam T411039W08

4 LED

7,5W

249lm 3000K 80 36°

black

T411039N08

4 LED

7,5W

285lm 4000K 75 36°

black

Electronic driver integrated

Flood adjustable beam +/- 15°

cd

322 161 -90°

90°

3000K

Elliptical wall washer adjustable beam T4110ELW08

4 LED

7,5W

287lm 3000K 80 7°x48°

black

T4110ELN08

4 LED

7,5W

328lm 4000K 75 7°x48°

black

Electronic driver integrated

Elliptical wall washer adjustable beam +/- 15°

562 -90°

90°

3000K

T409913

cd

1125

E lux

E lux

36º

cd

E lux

8816 7ºx48º

Recessing box 5 7/8” 15 cm 5 1/8” 13 cm

Orcamo 150 WALK-OVER SQUARE

10 3/16” 26 cm

code

IP67 IK09

lamping

power consumption

lumens

CCT

CRI beam

finish

Spot adjustable beam T410010W08

4 LED

7,5W

167lm 3000K 80 6°

black

T410010N08

4 LED

7,5W

190lm 4000K 75 6°

black

Electronic driver integrated

Spot adjustable beam +/- 15°

7150

H m

Ø C0 m

Ø C90 m

5363

3,0

0,36

0,36

794

2,5

0,30

0,30

1144

2,0

0,24

0,24

1788

1,5

0,18

0,18

3178

1,0

0,12

0,12

7150

0,5

0,06

0,06

28601

644

H m

ØC0 Ø C90 m m

483

3,0

1,90

1,90

71

2,5

1,59

1,59

103

2,0

1,27

1,27

160

1,5

0,95

0,95

285

1,0

0,63

0,63

642

0,5

0,32

0,32

2568

2250

H m

ØC0 Ø C90 m m

1687

3,0

2,68

0,38

245

2,5

2,24

0,31

353

2,0

1,79

0,25

551

1,5

1,34

0,19

980

1,0

0,89

0,13

2204

0,5

0,45

0,06

3575 1788 90°

-90° 3000K

Flood adjustable beam T410039W08

4 LED

7,5W

249lm 3000K 80 36°

black

T410039N08

4 LED

7,5W

285lm 4000K 75 36°

black

Electronic driver integrated

Flood adjustable beam +/- 15°

cd

322 161 -90°

90°

3000K

Elliptical wall washer adjustable beam T4100ELW08

4 LED

7,5W

287lm 3000K 80 7°x48°

black

T4100ELN08

4 LED

7,5W

328lm 4000K 75 7°x48°

black

Electronic driver integrated

Elliptical wall washer adjustable beam +/- 15°

562 -90° 3000K

T409914

cd

1125

90° cd

E lux

E lux

36º

E lux

8816 7ºx48º

Recessing box

105


CEILING

Orcamo downlight design by Ernesto Gismondi

RECESSED DOWNLIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES. • RECESSED • ROUND

CEILING INSTALLATION

AND SQUARE VERSION

• COMPOSED

BY BODY AND BLACK SILKSCREENED TEMPERED GLASS

• BODY

IN EN AB44100 ALUMINUM, SILICONE GASKETS; PROVIDED WITH 11 13/16” (30 cm)-LONG PRE-RESINED THREE-POLE CONNECTION CABLE

• GLASS

SURFACE TEMPERATURE LOWER THAN 104°F (40°C)

• GLASS

THICKNESS OF 0.3” (8 mm)

• ADJUSTABLE

OPTICS. PMMA LENSES IN 3 DIFFERENT VERSIONS OF BEAMS

• WHITE

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES : ··WARM=3000K / NEUTRAL=4000K

106

• CIRCUIT

OPERATION IS ASSURED ALSO IN CASE OF DAMAGE TO ONE OR SEVERAL LEDS

• CEILING • SCREWS

MOUNTING PLATE TO BE ORDERED SEPARATELY IN AISI 316 STAINLESS STEEL

• PAINTED

DIE-CAST ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES, ANTIOXIDANT PRIMER, POLYESTER PAINT

• INSTALLATION

MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• ELECTRONIC

DRIVER INTEGRATED


Orcamo

CEILING

Spot optic

Flood optic

Wall Washer optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

Wide luminous flow suitable for lighting of large areas

Elliptical distribution of the luminous flow suitable for wall washer effect

Lighting unit

Installation plate

Tempered glass flush with the ceiling

Orcamo 150 downlight Recessed depth : 5” (12,6 cm) Cut-out dimensions: ø 5 7/8” (15,5 cm) ± 0.08” (2mm) 5 7/8” (15,5 cm) ± 0.08” (2mm)

107


Orcamo

CEILING

5” 12,6 cm

Orcamo 150 DOWNLIGHT ROUND code

IP67 IK09

lamping

power consumption

lumens

CCT

CRI beam

finish

Spot adjustable beam

-90°

90°

T413010W08

4 LED

7.5W

167lm 3000K 80 6°

black

T413010N08

4 LED

7.5W

190lm 4000K 75 6°

black

Electronic driver integrated

1788 Spot adjustable beam +/- 15°

3575 5363 7150 3000K

Flood adjustable beam 4 LED

7.5W

249lm 3000K 80 36°

black

T413039N08

4 LED

7.5W

285lm 4000K 75 36°

black

90° 161

Flood adjustable beam +/- 15°

322 483 644 3000K

Elliptical wall washer adjustable beam T4130ELW08

4 LED

7.5W

287lm 3000K 80 7°x48°

black

4 LED

7.5W

328lm 4000K 75 7°x48°

black

Electronic driver integrated

90° 562

Elliptical wall washer adjustable beam +/- 15°

1125 1687 2250 3000K

T409919

Installation plate

Ø C0 m

Ø C90 m

0,5

0,06

0,06

1,0

0,12

0,12

7150

1,5

0,18

0,18

3178

2,0

0,24

0,24

1788

2,5

0,30

0,30

1144

3,0

0,36

0,36

794

H m

ØC0 Ø C90 m m

cd

E lux

0,5

0,32

0,32

2568

1,0

0,63

0,63

642

1,5

0,95

0,95

285

2,0

1,27

1,27

160

2,5

1,59

1,59

103

3,0

1,90

1,90

28601

cd

-90°

T4130ELN08

H m

cd

-90°

T413039W08

Electronic driver integrated

108

ø 6 1/8”± 0.08” ø 15,5 cm ± 2 mm

ø 5 7/8” ø 15 cm

E lux

71 36º

H m

ØC0 Ø C90 m m

0,5

0,45

0,06

8816

1,0

0,89

0,13

2204

1,5

1,34

0,19

980

2,0

1,79

0,25

551

2,5 3,0

2,24 2,68

0,31 0,38

353 245

E lux

7ºx48º


Orcamo

CEILING

5” 12,6 cm

Orcamo 150 DOWNLIGHT SQUARE code

IP67 IK09

□ 6 1/8”± 0.08” □ 15,5 cm ± 2 mm

5 7/8” 15 cm

lamping

power consumption

lumens

CCT

CRI beam

finish

Spot adjustable beam

-90°

90°

T412010W08

4 LED

7.5W

167lm 3000K 80 6°

black

T412010N08

4 LED

7.5W

190lm 4000K 75 6°

black

Electronic driver integrated

1788 Spot adjustable beam +/- 15°

3575 5363 7150 3000K

Flood adjustable beam 4 LED

7.5W

249lm 3000K 80 36°

black

T412039N08

4 LED

7.5W

285lm 4000K 75 36°

black

Electronic driver integrated

90° 161

Flood adjustable beam +/- 15°

322 483 644 3000K

Elliptical wall washer adjustable beam T4120ELW08

4 LED

7.5W

287lm 3000K 80 7°x48°

black

4 LED

7.5W

328lm 4000K 75 7°x48°

black

Electronic driver integrated

90° 562

Elliptical wall washer adjustable beam +/- 15°

1125 1687 2250 3000K

T409920

Ø C90 m

0,5

0,06

0,06

1,0

0,12

0,12

7150

1,5

0,18

0,18

3178

2,0

0,24

0,24

1788

2,5

0,30

0,30

1144

3,0

0,36

0,36

794

H m

ØC0 Ø C90 m m

cd

E lux

0,5

0,32

0,32

2568

1,0

0,63

0,63

642

1,5

0,95

0,95

285

2,0

1,27

1,27

160

2,5

1,59

1,59

103

3,0

1,90

1,90

28601

cd

-90°

T4120ELN08

Ø C0 m

cd

-90°

T412039W08

H m

E lux

71 36º

H m

ØC0 Ø C90 m m

0,5

0,45

0,06

8816

1,0

0,89

0,13

2204

1,5

1,34

0,19

980

2,0

1,79

0,25

551

2,5 3,0

2,24 2,68

0,31 0,38

353 245

E lux

7ºx48º

Installation plate

109


WALL / CEILING

Pantarei design by Ernesto Gismondi

SERIES OF WALL AND CEILING LIGHT FIXTURES WITH DIFFUSED EMISSION AND HALOGEN, FLUORESCENT OR LED SOURCES. • AVAILABLE

IN 3 SIZES: 7 1/16” (18 cm), 11 13/16” (300 cm) AND 15 3/8” (39 cm)

• AVAILABLE

IN 2 FINISHES : PAINTED SILVER GREY

OR BLACK • AVAILABLE

··HONEYCOMB MOLDED PRISMATIC SHOCK RESISTANT DIFFUSER IN OPAL POLYCARBONATE AVAILABLE FOR FLU AND LED SOURCES UNIT IN DIE-CAST EN-AB46100 ALUMINUM WITH 3-STAGE OUTDOOR TREATMENT : NANOTECHNOLOGIES,

110

316 STAINLESS STEEL SCREWS AND SILICONE SEAL GASKETS

• FOR

WITH 2 TYPES OF DIFFUSERS :

··HONEYCOMB MOLDED DIFFUSER IN INTERNALLY SANDED SODIUM-CALCIUM GLASS FOR HAL AND FLU VERSIONS AND WITH WHITE FINISH FOR LED VERSION, EXCEPT PANTAREI 190 LED, TO AVOID GLARING OF THE LAMPS

• LAMP

ANTIOXIDANT PRIMER, POLYESTER PAINT • AISI

FLUORESCENT AND LED VERSIONS, ELECTRONIC BALLASTS AND DRIVERS INTEGRATED IN FIXTURE


111


112


Pantarei

WALL / CEILING Pantarei 190 ø 7 1/16” ø 18 cm 3 3/16” 8 cm

Pantarei 190 code

IP65 IK06

lamping

power consumption lumens

CCT

CRI

finish

Pantarei 190 LED with sanded glass diffuser

-90°

90°

Tested in accordance with IES LM-79-08

T277638

5 LED

10W

383lm

3000K

80

black

T277698

5 LED

10W

383lm

3000K

80

silver grey

T287638

5 LED

10W

383lm

4000K

80

black

Sanded glass diffuser

T287698

5 LED

10W

383lm

4000K

80

silver grey

25 Diffused

50 75 101

Electronic driver integrated 3000K

cd

Pantarei 190 ø 7 1/16” ø 18 cm 3 3/16” 8 cm

Pantarei 190 code

IP65 IK10

lamping

power consumption lumens

CCT

CRI

finish

Pantarei 190 LED with opal polycarbonate diffuser

-90°

90°

Tested in accordance with IES LM-79-08

T277738

5 LED

10W

245lm

3000K

80

black

T277798

5 LED

10W

245lm

3000K

80

silver grey

T287738

5 LED

10W

245lm

4000K

80

black

Opal polycarbonate diffuser

T287798

5 LED

10W

245lm

4000K

80

silver grey

19 Diffused

38 58 77

Electronic driver integrated 3000K

cd

113


Pantarei

WALL / CEILING Pantarei 300

ø 11 13/16” ø 30 cm

3 13/16” 10 cm

Pantarei 300 code

IP65 IK06

Sanded glass diffuser

lamping

finish

Pantarei 300 with sanded glass diffuser

-90°

T271638

HAL max 1x75W (E26) or FLU 1x23W (E26)

black

T271698

HAL max 1x75W (E26) or FLU 1x23W (E26)

silver grey

Diffused

90° 108 162 216

120V line voltage

cd

Pantarei 300 FLU with sanded glass diffuser

-90°

T276438

FLU 1x26W (G24q-3)

black

T276498

FLU 1x26W (G24q-3)

silver grey

Diffused

90° 72

Electronic ballast integrated 144 cd

Pantarei 300 FLU with sanded glass diffuser

-90°

T277238

FLU 2x18W (G24q-2)

black

T277298

FLU 2x18W (G24q-2)

silver grey

Diffused

90° 150

Electronic ballast integrated

225 300 cd

code

lamping

power consumption lumens

CCT

LED version tested in accordance with IES LM-79-08

Pantarei 300 LED with sanded white glass diffuser

Sanded white glass diffuser

CRI

finish

36 LED

14W

498lm

3000K

85

black

T287898

36 LED

14W

498lm

3000K

85

silver grey

T277838

36 LED

14W

532lm

4000K

80

black

T277898

36 LED

14W

532lm

4000K

80

silver grey

39 Diffused

79 118 157

Electronic driver integrated 3000K

114

-90°

90°

T287838

cd


Pantarei

WALL / CEILING Pantarei 300

ø 11 13/16” ø 30 cm

3 13/16” 10 cm

Pantarei 300 code

IP65 IK10

Opal polycarbonate diffuser

lamping

finish

Pantarei 300 FLU with opal polycarbonate diffuser

-90°

T276538

FLU 1x26W (G24q-3)

black

T276598

FLU 1x26W (G24q-3)

silver grey

Diffused

90° 108

Electronic ballast integrated

162 216 cd

Pantarei 300 FLU with opal polycarbonate diffuser

-90°

T277338

FLU 2x18W (G24q-2)

black

T277398

FLU 2x18W (G24q-2)

silver grey

Diffused

90° 100

Electronic ballast integrated 200 cd

code

LED version tested in accordance with IES LM-79-08

lamping

power consumption lumens

CCT

CRI

finish

Pantarei 300 LED with opal polycarbonate diffuser

-90°

90°

T288038

36 LED

14W

544lm

3000K

85

black

T288098

36 LED

14W

544lm

3000K

85

silver grey

T277938

36 LED

14W

582lm

4000K

90

black

T277998

36 LED

14W

582lm

4000K

90

silver grey

44 Diffused

89 133 178

Electronic driver integrated 3000K

cd

115


116


Pantarei

WALL / CEILING Pantarei 390

ø 15 3/8” ø 39 cm

5 1/8” 13 cm

Pantarei 390 code

IP65 IK06

Sanded glass diffuser

lamping

finish

Pantarei 390 HAL with sanded glass diffuser

-90°

T273138

HAL max 2x60W (E26)

black

T273198

HAL max 2x60W (E26)

silver grey

Diffused

90° 150

120V line voltage

200

300 cd

Pantarei 390 FLU with sanded glass diffuser

-90°

T272038

FLU 2x26W (G24q-3)

black

T272098

FLU 2x26W (G24q-3)

silver grey

Diffused

90° 215

Electronic ballast integrated

323

540 cd

code

LED version tested in accordance with IES LM-79-08 Sanded white glass diffuser

lamping

power consumption lumens

CCT

CRI

finish

Pantarei 390 LED with sanded white glass diffuser

-90°

90°

T288238

1 LED COB

29W

960lm

3000K

80

black

T288298

1 LED COB

29W

960lm

3000K

80

silver grey

T278238

1 LED COB

29W

960lm

4000K

80

black

226

T278298

1 LED COB

29W

960lm

4000K

80

silver grey

301

75 Diffused

151

Electronic driver integrated 3000K

cd

Pantarei 390

ø 15 3/8” ø 39 cm

5 1/8” 13 cm

Pantarei 390 code

IP65 IK10

Opal polycarbonate diffuser

lamping

finish

Pantarei 390 FLU with opal polycarbonate diffuser

-90°

T272138

FLU 2x26W (G24q-3)

black

T272198

FLU 2x26W (G24q-3)

silver grey

Diffused

90° 144

Electronic ballast integrated 287 cd

code

LED version tested in accordance with IES LM-79-08

lamping

power consumption lumens

CCT

CRI

finish

Pantarei 390 LED with opal polycarbonate diffuser

-90°

90°

T288338

1 LED COB

29W

1000lm

3000K

80

black

T288398

1 LED COB

29W

1000lm

3000K

80

silver grey

T278338

1 LED COB

29W

1000lm

4000K

80

black

243

T278398

1 LED COB

29W

1000lm

4000K

80

silver grey

324

81 Diffused

162

Electronic driver integrated 3000K

cd

117


FLOOR

Reeds design by Klaus Begasse

LIGHT FIXTURE WITH DIFFUSED EMISSION AND ­­HIGH-PERFORMANCE LED LIGHT SOURCES • LIGHT

IS DIFFUSED THROUGH 7 PMMA RODS WITH DIFFERENT HEIGHTS TO GIVE THE IMPRESSION OF A GROOVE OF REEDS. EACH ROD IS SCREWED TO THE BASE BY MEANS OF AISI 316 STAINLESS STEEL BUSHES

• TECHNOPOLYMER

AESTHETIC COVER

• BASE

MADE UP OF A TRANSPARENT POLYCARBONATE CASING INSTALLED BETWEEN 2 AISI316 STAINLESS STEEL PLATES FIXED BY MEANS OF AISI316 STAINLESS STEEL SCREWS. WATER SEALING IS ASSURED BY A SILICONE GASKET. THE LIGHT FIXTURE CAN BE FASTENED TO THE FLOOR BY MEANS OF THE HOLES IN THE LOWER PLATE.

• FOR

IP67 VERSION: COMPLETE WITH INTEGRATED BALLAST AND SUPPLIED WITH A 4’ 11” (1,5m) LONG H05RN-F 2X1 CABLE PROVIDED WITH IP67 CONNECTOR FOR THE ELECTRICAL CONNECTION TO THE MAINS SUITABLE FOR 1/4”-1/2” (5-13,5mm) DIAMETER CABLES

• FOR

IP68 VERSION: SUPPLIED WITH 24V DC POWER AND IS PROVIDED WITH A 16’ 5” (5m) LONG H05RN-F 2X1 CABLE WITH IP68 CONNECTOR FOR THE ELECTRICAL CONNECTION TO THE MAINS SUITABLE FOR 1/4”-1/2” (5-13,5mm) DIAMETER CABLES

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

118


Reeds

floor

Reeds

59” 149,9 cm

8 13/16” 22,4 cm

2 1/8” 5,4 cm 8 5/8” 21,9 cm

Reeds IP67

IP67

code

lamping

power consumption

lumens

CCT

CRI

T087408

7 LED

9.5W

124lm

3000K

80

105

driver integrated

79

Diffused

53 26 -90°

90° cd

Reeds triple

59” 149,9 cm

16 1/2” 41,8 cm

2 1/8” 5,4 cm 16 11/16” 42,3 cm

Reeds IP67 TRIPLE

IP67

code

lamping

power consumption

lumens

CCT

CRI

T087708

21 LED

28W

283lm

3000K

80

284

driver integrated

213

Diffused

142 71 -90°

90° cd

119


120


Reeds

floor

Reeds

59” 149,9 cm

8 13/16” 22,4 cm

2 1/8” 5,4 cm 8 5/8” 21,9 cm

Reeds IP68

IP68

code

lamping

power consumption

lumens

CCT

CRI

T087508

7 LED

9.5W

124lm

3000K

80

105

24V DC power supply integrated

79

Diffused

53

tested in accordance with IES LM-79-08

26 -90°

90° cd

Reeds triple

59” 149,9 cm

16 1/2” 41,8 cm

2 1/8” 5,4 cm 16 11/16” 42,3 cm

Reeds IP68 TRIPLE

IP68

code

lamping

power consumption

lumens

CCT

CRI

T087808

21 LED

28W

283lm

3000K

80

284

24V DC power supply integrated

213

Diffused

142

tested in accordance with IES LM-79-08

71 -90°

90° cd

121


WALL/CEILING/FLOOR

Spike LIGHT FIXTURE WITH HIGH-PERFORMANCE LED LIGHT SOURCES. • WALL,

CEILING OR FLOOR INSTALLATION

• MONOCHROMATIC

VERSION: LENGTH 40 1/8” (102 cm)

LENSES IN 2 DIFFERENT VERSIONS OF BEAMS: 10° OR 25°

• ELECTRICAL

• WHITE

• BODY

• INSTALLATION

CONNECTION TO THE DRIVER BY MEANS OF 39 3/8” (100 cm) LONG FOUR-POLE CABLE, WITH IP68 TERMINAL BOARD SUPPLIED WITH THE FIXTURE IN EXTRUDED EN AW6060 T5 ALUMINUM

• STOPPERS

IN DIE-CAST ALUMINUM WITH SILICONE GASKET

• ADUSTABLE

BRACKETS IN ALUMINUM

• DIFFUSER

IN 0.1” (3 mm) THICK TRANSPARENT TEMPERED GLASS

• PAINTED

PROFILE WITH 2-STAGE OUTDOOR TREATMENT: PRIMER, OUTDOOR PAINT

• ANTIDAZZLE

SCREEN IN EXTRUDED ALUMINUM PAINTED UPON REQUEST TO BE ORDERED SEPARATELY

122

• PMMA

MONOCHROMATIC LEDS AVAILABLE IN 2 COLOR TEMPERATURES: ··WARM = 3000K / NEUTRAL = 4000K MUST BE CARRIED OUT BY SPECIALIZED PERSONNEL. CAREFULLY FOLLOW PROVIDED INSTRUCTIONS

• STANDARD

NON DIMMABLE. FOR POTENTIAL DIMMING OPTION, PLEASE CONTACT YOUR ARTEMIDE SALES REPRESENTATIVE.

• 24V

DC SUPPLY REQUIRED (REMOTE DRIVER SOLD SEPARATELY)


Spike

WALL/CEILING/FLOOR

Spot optic

Medium optic

Concentrated luminous flow to highlight details avoiding unwanted light dispersion

Medium luminous flux to highlight details, large s足 ections of windows.

123


124

Palace BiandrĂ , Milan - IT


Spike

WALL/CEILING/FLOOR

1 11/16” 4,2 cm 40 1/8” 102 cm

Spike code

IP65

power lamping consumption lumens

CCT

CRI

1 3/8” 3,5 cm

beam finish

Spot beam NL5000410K002UL 24 LED 33.6W

1776lm 3000K 80

10°

silver grey

NL5000410W002UL 24 LED 33.6W

1920lm 4000K 80

10°

silver grey

Spot

24Vdc remote driver supplied separately Components needed for dimming are available upon request.

Medium beam NL5000430K002UL 24 LED 33.6W

1776lm 3000K 80

25°

silver grey

NL5000430W002UL 24 LED 33.6W

1920lm 4000K 80

25°

silver grey

Medium

24Vdc remote driver supplied separately Components needed for dimming are available upon request.

NL50008

Antidazzle screen

L=102 cm / 40 1/8”

For all photometrics information, please download IES files on www.agi32.com or contact your Artemide local Sales Representative.

125


FLOOR

Tolomeo XXL design by Michele De Lucchi & Giancarlo Fassina

LARGE SCALE LIGHT FIXTURE WITH DIRECT EMISSION, AND FLUORESCENT SOURCES • AVAILABLE

WITH BASE OR FIXED SUPPORT (PIVOT) MADE OF MASS-COLORED CONCRETE

• DIFFUSER

IN MASS-PIGMENTED POLYPROPYLENE, SCREEN IN LIGHT-DIFFUSING SILKSCREENED METHACRYLATE, REFLECTOR IN PAINTED ALUMINUM

• MOBILE-ARM

STRUCTURE IN EXTRUDED EN-AW-6060 ALUMINUM WITH BRIGHT ANODIZING TREATMENT

• POLISHED-PAINTED

ARTICULATIONS IN DIE-CAST EN-AB 46100 ALUMINUM

• ADJUSTMENT

SEAL GASKETS

• SUITABLE

FOR WATERTIGHT CONNECTION

• NOT

DIMMABLE

• ELECTRONIC

126

SYSTEM IN AISI 316 STAINLESS STEEL

• SILICONE

BALLAST INTEGRATED


127


128

Meet Design, Turin (Italy)


Tolomeo XXL

FLOOR

103 1/8 ” 262 cm

ø 39 3/8 ” ø 100 cm

Tolomeo XXL WITH BASE

IP55

114 15/16” 292 cm

code

lamping

1532015A

FLU 2x57W (GX24q-5)

finish

silver grey

-90°

6m

90°

Electronic ballast integrated Wide flood

50 90 130

1032

-30°

2064

170 290

30°

210

250

0m

cd

lux

103 1/8” 262 cm

Tolomeo XXL WITH FIXED SUPPORT IP55

114 15/16” 292 cm

code

lamping

1535015A

FLU 2x57W (GX24q-5)

finish

silver grey

-90°

6m

90°

Electronic ballast integrated Wide flood

50 90 130

1032

-30°

2064

170 290

30° cd

210

250

0m lux

129


130


131


General terminology

ARTEMIDE OUTDOOR COLLECTION

TECHNICAL INFORMATION DIMENSIONS

IP RATING

IK SHOCK-RESISTANCE DEGREE

Dimensions are given in inches and centimeters.

Electrical fittings are manufactured to ­ p revent the intrusion and contact with solids and l­iquids. Resistance against the ingress of solids and liquids is expressed by the initials IP, f­ ollowed by two digits that stand for the degree of protection : the first referring to solids, the second to liquids.

The light fixture is placed on a horizontal stable surface. A body of a certain shape and weight is dropped repeatedly from a certain height ­according to the IK degree to be tested.

SUPPLY VOLTAGE All fittings are manufactured for 120V/60HZ supply voltage. UNV = Universal Voltage 120V-277V, 50 or 60Hz 347V = For commercial use in Canada where available. CLASSIFICATIONS

Class I The safety of the luminaire is guaranteed by an additional protective conductor (Earth) connected with the metal frame of the lamp. Class II The safety of the luminaire is guaranteed by the double reinforced insulation of conductive parts, and without earth connection Class III The luminaire is fitted with a protection device against eletrical shock that features a very low voltage power supply and prevents it from generating higher voltages. Notes : a Class III luminaire does not have to be equipped with an earth protection

Luminaire suitable for installation on normally inflammable surfaces

Underwriters Laboratories, US and Canadian certified.

132

FIRST DIGIT 0. Non-protected. 1. Protected against the penetration of solid objects greater than 2” (5 cm) 2. Protected against the penetration of solid objects greater than 1/2” (1.2 cm) 3. Protected against the penetration of solid objects greater than 1/8” (0.25 cm) 4. Protected against the penetration of solid objects greater than 1/16” (0.1 cm) 5. Dust-protected 6. Dust-tight SECOND DIGIT 0. Non-protected. 1. Protected against dripping water. Water equivalent to 1 mm rainfall per minute (10 minutes) 2. Protected against dripping water when tilted up to 15° from normal position Water equivalent to 3 mm rainfall per minute (10 minutes) 3. Protected against spraying water at any angle up to 60° from vertical Water volume : 0.7 litres per minute Pressure : 80–100 kN/m² (5 minutes) 4. Protected against splashing water Water volume : 10 litres per minute Pressure : 80–100 kN/m² (10 minutes) 5. Protected against water jets Water volume : 12.5 litres per minute Pressure : 30 kN/m² at distance of 3m (at least 3 minutes) 6. Protected against powerful water jets Water volume : 100 litres per minute Pressure : 100 kN/m² at distance of 3m (at least 3 minutes) 7. Protected against the effects of immersion Immersion at depth of 1m (30 minutes) 8. Protected against submersion Depth specified by manufacturer (continuous immersion in water)

IK Impact Degree Energy (J)

Equivalent impact

00

Unprotected

-

01

0,15

Fall of a 200g body from 7.5cm of height

02

0,2

Fall of a 200g body from 10cm of height

03

0,35

Fall of a 200g body from 17.5cm of height

04

0,5

Fall of a 200g body from 25cm of height

05

0,7

Fall of a 200g body from 35cm of height

06

1

Fall of a 500g body from 20cm of height

07

2

Fall of a 500g body from 40cm of height

08

5

Fall of a 1,7kg body from 29.5cm of height

09

10

Fall of a 5kg body from 20cm of height

10

20

Fall of a 5kg body from 40cm of height


General terminology

ARTEMIDE OUTDOOR COLLECTION

PHOTOMETRIC DATAS PHOTOMETRIC CURVE

ISOLUX DIAGRAM

LIGHT CONE

It represents the light intensity distribution (in candles/1000 lumen) emitted by the light fixture on the planes passing through its optical axis. Two curves are indicated for each light fixture. The first one refers to the transversal C0-C180 plane (continuous line) and the second one to the longitudinal C90-C270 plane (broken line). The photometric curve defines the lighting engineering features of the fixture, such as the luminous flux control, the type of emission, the maximum intensity direction, which are needed for testing illuminance values during use.

It shows the illuminance distribution on the vertical plane (wall washer fixtures ) or on the horizontal plane (floor fixtures and poles). The Isolux lines link the points of equal illuminance.

It shows the maximum illuminance level in lux, measured in horizontal parts at different heights with respect to the fixture. øC0 and øC90 represent the lengths of the section axes. In case of rotating symmetric emissions, the two values coincide. The emission angle shows the flat angle subtended by the directions where light intensity is equal to the 50% of the maximum intensity.

For latest updated information regarding photometric data, please contact your Artemide Sales Representative.

-90°

90° 31 62

3m

5 10

15 25 35 50

0m

LIGHTING APPLICATION

H m

ØC0 m

Ø C90 m

E lux

3,0

0,70

0,70

81

2,5

0,59

0,59

117

2,0

0,47

0,47

182

1,5

0,35

0,35

324

1,0

0,23

0,23

728

0,5

0,12

0,12

2913

Summary of illuminance levels according to the design parameters. h= source height a= width of the light fixture positioning interval L= illuminance distance

94 125

LM-79-08 CERTIFICATION LM-79 is an approved method for taking electrical and photometric measurements of SSL products. It covers total flux (light output), electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 test results. Why should a manufacturer take the pledge? Taking the pledge to test products and register them for a LED Lighting Facts label establishes a manufacturer as an industry leader in support of high quality products for LED lighting. Accurate and consistent reporting of LED product performance will increase consumer satisfaction and accelerate market adoption. What is the LED Lighting Facts label? Luminaire manufacturers who take the pledge agree to present the LED Lighting Facts label on product packaging or in product literature. All measurements must use results from product testing in accordance with IESNA standard LM-79-2008, Approved Method for the Electrical and Photometric Testing of Solid-State Lighting Devices. The label reports product performance results in five areas: 1. Lumens 2. Lumens per watt (lm/W) 3. Watts at 120 VAC 4. Correlated Color Temperature (CCT) 5. Color Rendering Index (CRI) Additional metrics related to reliability, product consistency, construction, and other characteristics may be considered in future editions of the label.

133


Code Index

134

ARTEMIDE OUTDOOR COLLECTION

CODE PAGE

CODE PAGE

CODE PAGE

1532015A 1535015A L220488 L220498 L221188 L221198 L225488 L225498 L228088 L228098 L228188 L228198 NL7029ELK0UL NL7029ELW0UL NL7398VSK0UL NL7398VSW0UL NL7419VSK0UL NL7419VSW0UL NL19052UL NL30000ELK002UL NL30000ELK005UL NL30000ELW002UL NL30000ELW005UL NL30001ELK002UL NL30001ELK005UL NL30001ELW002UL NL30001ELW005UL NL31013VTK002UL NL31013VTK006UL NL50008 NL74890 NL75810 NL76670 NL76680 NL97150UL NL702910K0UL NL702910W0UL NL702925K0UL NL702925W0UL NL3000010K002UL NL3000010K005UL NL3000010W002UL NL3000010W005UL NL3000039K002UL NL3000039K005UL NL3000039W002UL NL3000039W005UL NL3000110K002UL NL3000110K005UL NL3000110W002UL NL3000110W005UL NL3000139K002UL NL3000139K005UL NL3000139W002UL NL3000139W005UL NL5000410K002UL NL5000410W002UL NL5000430K002UL NL5000430W002UL NLA010005 NLA010006 T4002ELN08 T4002ELW08

T4003ELN08 T4003ELW08 T4006ELN08 T4006ELW08 T4032ELN08 T4032ELW08 T4033ELN08 T4033ELW08 T4036ELN08 T4036ELW08 T4060ELN08 T4060ELW08 T4061ELN08 T4061ELW08 T4062ELN08 T4062ELW08 T4063ELN08 T4063ELW08 T4064ELN08 T4064ELW08 T4065ELN08 T4065ELW08 T4080ELN08 T4080ELW08 T4081ELN08 T4081ELW08 T4082ELN08 T4082ELW08 T4083ELN08 T4083ELW08 T4084ELN08 T4084ELW08 T4085ELN08 T4085ELW08 T4100ELN008 T4100ELW008 T4110ELN008 T4110ELW008 T4120ELN08 T4120ELW08 T4130ELN08 T4130ELW08 T4180ELN08 T4180ELN18 T4180ELW08 T4180ELW18 T4181ELN08 T4181ELN18 T4181ELW08 T4181ELW18 T4188ELN08 T4188ELN18 T4188ELW08 T4188ELW18 T4189ELN08 T4189ELN18 T4189ELW08 T4189ELW18 T4190NLN08 T4190NLN18 T4190NLW08 T4190NLW18 T4201NLN08

T4201NLN18 T4201NLW08 T4201NLW18 T4211NLN08 T4211NLN18 T4211NLW08 T4211NLW18 T41911NN08 T41911NN18 T41911NW08 T41911NW18 T41922NN08 T41922NN18 T41922NW08 T41922NW18 T41931LN08 T41931LN18 T41931LW08 T41931LW18 T41941NN08 T41941NN18 T41941NW08 T41941NW18 T41952NN08 T41952NN18 T41952NW08 T41952NW18 T41961LN08 T41961LN18 T41961LW08 T41961LW18 T42004LN08 T42004LN18 T42004LW08 T42004LW18 T42004NN08 T42004NN18 T42004NW08 T42004NW18 T42012LN08 T42012LN18 T42012LW08 T42012LW18 T42012NN08 T42012NN18 T42012NW08 T42012NW18 T42021LN08 T42021LN18 T42021LW08 T42021LW18 T42021NN08 T42021NN18 T42021NW08 T42021NW18 T42104LN08 T42104LN18 T42104LW08 T42104LW18 T42104NN08 T42104NN18 T42104NW08 T42104NW18

129 129 93 93 93 93 93 93 93 93 93 93 77 77 75 75 75 75 75 62 62 62 62 63 63 63 63 11 11 125 75 75 75 75 77 77 77 77 77 62 62 62 62 62 62 62 62 63 63 63 63 63 63 63 63 125 125 125 125 11 11 83 83

84 84 85 85 83 83 84 84 85 85 89 89 89 89 90 90 90 90 91 91 91 91 89 89 89 89 90 90 90 90 91 91 91 91 105 105 105 105 109 109 108 108 23 23 23 23 23 23 23 23 55 55 55 55 54 54 54 54 79 79 79 79 49

49 49 49 51 51 51 51 13 13 13 13 13 13 13 13 15 15 15 15 13 13 13 13 13 13 13 13 15 15 15 15 49 49 49 49 49 49 49 49 49 49 49 49 47 47 47 47 47 47 47 47 47 47 47 47 51 51 51 51 51 51 51 51


Code Index

ARTEMIDE OUTDOOR COLLECTION

CODE PAGE

CODE PAGE

CODE PAGE

T42112LN08 T42112LN18 T42112LW08 T42112LW18 T42112NN08 T42112NN18 T42112NW08 T42112NW18 T42121LN08 T42121LN18 T42121LW08 T42121LW18 T42121NN08 T42121NN18 T42121NW08 T42121NW18 T051308 T051338 T051398 T051408 T051438 T051498 T081008 T081018 T081108 T081118 T081208 T081218 T081308 T081318 T081408 T081418 T082008 T082018 T082108 T082118 T082208 T082218 T082308 T082318 T082408 T082418 T082908 T082918 T083608 T083618 T083708 T083718 T083808 T083818 T083908 T083918 T085008 T085108 T085308 T085708 T085808 T087408 T087508 T087708 T087808 T271638 T271698

T272038 T272098 T272138 T272198 T273138 T273198 T276438 T276498 T276538 T276598 T277238 T277298 T277338 T277398 T277638 T277698 T277738 T277798 T277838 T277898 T277938 T277998 T278238 T278298 T278338 T278398 T287638 T287698 T287738 T287798 T287838 T287898 T288038 T288098 T288238 T288298 T288338 T288398 T400210N08 T400210W08 T400239N08 T400239W08 T400310N08 T400310W08 T400339N08 T400339W08 T400610N08 T400610W08 T400639N08 T400639W08 T403210N08 T403210W08 T403239N08 T403239W08 T403310N08 T403310W08 T403339N08 T403339W08 T403610N08 T403610W08 T403639N08 T403639W08 T406010N08

T406010W08 T406039N08 T406039W08 T406110N08 T406110W08 T406139N08 T406139W08 T406210N08 T406210W08 T406239N08 T406239W08 T406310N08 T406310W08 T406339N08 T406339W08 T406410N08 T406410W08 T406439N08 T406439W08 T406510N08 T406510W08 T406539N08 T406539W08 T408010N08 T408010W08 T408039N08 T408039W08 T408110N08 T408110W08 T408139N08 T408139W08 T408210N08 T408210W08 T408239N08 T408239W08 T408310N08 T408310W08 T408339N08 T408339W08 T408410N08 T408410W08 T408439N08 T408439W08 T408510N08 T408510W08 T408539N08 T408539W08 T409905 T409906 T409907 T409908 T409913 T409914 T409919 T409920 T410010N008 T410010W008 T410039N008 T410039W008 T411010N008 T411010W008 T411039N008 T411039W008

51 51 51 51 50 50 50 50 50 50 50 50 50 50 50 50 66 66, 67 66, 67 66 66, 67 66, 67 35 35 37 37 33 33 35 35 37 37 29 29 27 27 27 27 27 27 27 27 17, 39 39 98 98 98 98 99 99 99 99 73 73 59 71 71 119 121 119 121 114 114

117 117 117 117 117 117 114 114 115 115 114 114 115 115 113 113 113 113 114 114 115 115 117 117 117 117 113 113 113 113 114 114 115 115 117 117 117 117 83 83 83 83 84 84 84 84 85 85 85 85 83 83 83 83 84 84 84 84 85 85 85 85 89

89 89 89 89 89 89 89 90 90 90 90 90 90 90 90 91 91 91 91 91 91 91 91 89 89 89 89 89 89 89 89 90 90 90 90 90 90 90 90 91 91 91 91 91 91 91 91 85 85 84 83 105 105 108 109 105 105 105 105 105 105 105 105

135


Code Index

136

ARTEMIDE OUTDOOR COLLECTION

CODE PAGE

CODE PAGE

CODE PAGE

T412010N08 T412010W08 T412039N08 T412039W08 T413010N08 T413010W08 T413039N08 T413039W08 T418010N08 T418010N18 T418010W08 T418010W18 T418039N08 T418039N18 T418039W08

T418039W18 T418110N08 T418110N18 T418110W08 T418110W18 T418139N08 T418139N18 T418139W08 T418139W18 T418810N08 T418810N18 T418810W08 T418810W18 T418839N08 T418839N18

T418839W08 T418839W18 T418910N08 T418910N18 T418910W08 T418910W18 T418939N08 T418939N18 T418939W08 T418939W18

109 109 109 109 108 108 108 108 23 23 23 23 23 23 23

23 23 23 23 23 23 23 23 23 55 55 55 55 55 55

55 55 54 54 54 54 54 54 54 54


ARTEMIDE OUTDOOR COLLECTION

137


NORTH AMERICA UNITED STATES HEADQUARTERS Artemide, Inc. • 250 Karin Lane, Hicksville, NY 11801 T. 631-694-9292 • Toll Free 1-877-Art-9111 • email: infousa@artemide.net

artemide.net

ARTEMIDE SHOWROOMS CHICAGO 351 W Hubbard Street, #100 Chicago, IL 60654 T. 312-475-0100 chicago@artemide.net

LOS ANGELES 9006 Beverly Boulevard West Hollywood, CA 90048 T. 310-888-4099 losangeles@artemide.net

MIAMI 2222 Ponce de Leon Boulevard, #100 Coral Gables, FL 33134 T. 305-444-5800 miami@artemide.net

DALLAS T. 214-747-8344 dallas@artemide.net

SAN FRANCISCO T. 415-393-9955 sanfrancisco@artemide.net

NEW YORK 46 Greene Street New York,  NY 10013 T. 212-925-1588 newyork@artemide.net

ARTEMIDE SALES OFFICE PHILADELPHIA T. 215-733-9877 philadelphia@artemide.net

CANADA HEAD OFFICE / BUREAU CHEF Artemide Canada Ltée/Ltd. • 11105, rue Renaude Lapointe, Montréal, Québec H1J 2T4 T. 514-323-6537 • Toll Free 1-888-777-2783 • email: infocanada@artemide.net

artemide.net

ARTEMIDE SHOWROOMS / SALLES DE MONTRE ARTEMIDE MONTREAL 440, rue Saint-Pierre Montréal, Québec H2Y 2M5 T. 514-788-3788 montreal@artemide.net

TORONTO 5 Mill Street Toronto, Ontario M5A 3R6 T. 416-628-6718 toronto@artemide.net

MEXICO Scultura Luminosa, Sudermann #246, Col. Chapultepec Morales, Mexico D.F., 11570 T. +52-55-5250-2661 / +52-55-4633-2744 • email : info@artemide.mx MEXICO Scultura Luminosa Suderman #246, Col. Chapultepec Morales Mexico D.F. 11570 T. +52-55-5250-2661 F. +52-55-4633-2744 info@artemide.mx

artemide.mx


Graphic design : Studio Cerri & Associatti Pierlugi Cerri Alessandro Colombo Roberto Libanori Photos : Beppe Raso Luigi Rinaldelli Miro Zagnoli David Zanardi Federico Villa Rendering : Alberto Massimauri Alessandro Massimauri Francesco Dazzara Alessandro Peccati

Print : Solisco © Artemide - August 2014

Artemide reserves the right to change, at any time and without prior warning, the technical specifications of any product illustrated in this catalog.


www.artemide.net


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.