Index
QUICK RELEASE page 4 SEAT CLAMP page 8 HEAD ACCESSORIES
page 16
CHAIN RING SYSTEM
page 20
CHAIN TENSIONER SYSTEM
page 22
BMX SERIES page 23 HUB page 28 WHEELSET page 30 CHAIN GUIDE SYSTEM
page 32
HUB RIM
SEAT POST page 35 BRAKE SYSTEM page 36 WATER BOTTLE & CAGE
page 39
35 SYSTEM page 40 STEM page 41 HANDLE BAR page 42
CHAIN GUIDE
ACCESSORIES page 46
BRAKE 35 SYSTEM TRI-BAR
LLB/LLU high quality seal bearing, 4 paw design, Cr-mo carbonrige surface Harden heat treatment , Correct engage angle,Special waterproof design, Were through 10,000 km of riding test.
Alloy rims coating carbon The choice of economic, beautiful, stiffer and safer. Proprietary manufacturing process to provide you the cheapest and aesthetically pleasing surface treatment of the rim.
All new design with breakaway allows the lower arm of the boomerang to flex out of the way upon impact. Eliminate twisting guides or broken mounting tabs.
BRAKE POWER
Lighter & special geometric design to increase 30% of the braking force, and apply to wider rims. New
30% UP Old July-7900
July-7905
Stiffer, Easy control. Effectively enhanced the rigidity of 18%. Better feeling to handle and reduce the probability of deformation while riding.
STRENGTH
18% UP
ø31.8
ø35
mm
Arm rest automatic position when you grip in flat bar. Push down the arm rest to enable aerodynamics position.
QUICK RELEASE
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Alloy With Carbon Fiber Quick Release CARBON perfect symphony with the aluminum The high intensity both lightweight and art products
Cr-mo Hollow Axle Available
QR
-S
P
-R OT
/R
C
Q
QR
-
R-
SP
O
R L-
-F OT SP
Q
QR-SPOT/F/R/RC
R-
SP
O
F L-
QR-SPOL-F/R
<4-01>
TI AXLE ALLOY WITH CARBON FIBER LEVER WEIGHT: 42.5 g (RACING BIKE) 46.0 g (MTB) OPTION: CR-MO HOLLOW AXLE AVAILABLE
QR
P -S
-L OL
R X-
QR
P -S
-L OL
Q
F X-
4
S R-
PO
C-
R/
RC
QR
QR-SPOL-LX/F/R
<4-02>
FOR MTB CR-MO AXLE ALLOY WITH CARBON FIBER LEVER WEIGHT: 68g (MTB)
<4-03>
FOR MTB TI AXLE OR CR-MO AXLE ALLOY WITH CARBON FIBER LEVER WEIGHT: 46.5 g (MTB)
SP
OC
-F
QR-SPOC/F/R/RC
<4-04>
TI AXLE ALLOY LEVER WEIGHT: 44.8 g (RACING BIKE) 47.0 g (MTB) OPTION: CR-MO HOLLOW AXLE AVAILABLE
QUICK RELEASE QR
K
-R
/R
C QR
QR
-K
K2
-R
/R
C
-F
QR
QR-K
-K
2-
F
QR-K2
<5-01>
TI AXLE OR CR-MO AXLE ALLOY LEVER WEIGHT: 50.5 g (RACING BIKE) 54.0 g (MTB)
TI AXLE OR CR-MO AXLE ALLOY LEVER WEIGHT: 52.5 g (RACING BIKE) 56.0 g (MTB)
QR
-S
-R PL
C /R
QR
-
QR
L-F
-S
P
AL L-B
SP
L-R
/R
QR
QR-SPL
C
-
AL L-B SP
<5-02>
L-F
QR
P -S
AL L-B
L-S
QR-SPL-BALL
CR-MO AXLE ALLOY LEVER WEIGHT: 71.0 g (RACING BIKE) 74.5 g (MTB)
QR
L-H AL -B
R/
HR
CR-MO AXLE ALLOY LEVER WEIGHT: 73.0 g (RACING BIKE) 76.5 g (MTB) 27.5 g (S)
AL -B
L-
HF
QR
A -B
-S LL
QR
H
P -H
R 2-
/R
C
QR
QR-BALL-H
-H
-F P2 QR
<5-03>
-H
-S P2
QR-HP2
CR-MO AXLE ALLOY LEVER WEIGHT: 98.5 g (RACING BIKE) 100.5 g (MTB) 36.5 g (S)
-R
/R
2M -7
-F
Q
Q
M 72 R-
-S
QR-72M
H 72 R-
-R
/R
C
QR
<5-04>
2H -7
-F
QR
CR-MO AXLE ALLOY LONGER LEVER WEIGHT: 100 g (RACING BIKE) 103 g (MTB) 39 g (S)
CHART (in mm)
雙牙式QR圖
PS. 2T= Ø6 mm L-3 mm
L
PARTS
W
DIA
L
PARTS
W
DIA
27 25 30 30 28 33 35
8 8 6 8 6 6 6
68
Hub QR
P5 P7 P5 L-39
35 33 28 W
6 6 6 5
150/F
Hub w:100 / t: 5.5 x 2
111
5
56
P5+2T P7+2T P5 P7+2T P7 P7+00 P5+00
153/F
Hub w:100 / t: 7 x 2
114
5
136
HUB W:100 / Dropout / t: 4 × 2
108
5
183/RC
111
5
144
5
139
HUB W:100 / Dropout / t: 5.5 × 2
Hub w:130 / t: 7 x 2
HUB W:135 / Dropout / t: 7 × 2 135 / t: 8 x 2
149 151
5 5
188/R
178
Hub w:135 / t: 7 x 2
149
5
192/R
Hub w:135 / t: 9 x 2
153
5
56 51 56
180
68 60
2H -7
QR-72H
-S
<5-08>
CR-MO AXLE ALLOY LONGER LEVER WEIGHT: 123 g (RACING BIKE) 125 g (MTB) 44 g (S)
Ø8 mm
51 51
<5-07>
CR-MO AXLE ALLOY LEVER WEIGHT: 103.5 g (RACING BIKE) 105.5 g (MTB) 32.5 g (S)
C
QR
51
<5-06>
C
QR
2M -7 QR
<5-05>
HUB
W
F
FRONT
100
R
REAR MTB
135
RC
REAR RC
130
5
QUICK RELEASE
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Q
R-
/ ER 1KM
C ER
Q
R-
E 1KM
F
Q
Q
R
M -K
2
M H-
54
-R
/R
R
S 1M -K
E
QR-KM1
QR
-K
M
/ ER 2-
C ER
<6-01>
Q
K R-
M
E 2-
F
QR-KM1-SE FOR SEAT TUBE QR-KM1-EF/100 FOR FRONT QR-KM1-ER/135 FOR MTB REAR QR-KM1-ERC/130 FOR RACING REAR
Q
R-
KM
S 2-
E
QR-KM2
<6-06>
QR-KM2-SE FOR SEAT TUBE QR-KM2-EF/100 FOR FRONT QR-KM2-ER/135 FOR MTB REAR QR-KM2-ERC/130 FOR RACING REAR
C
Q
K R-
M
2H
-M
5
F 4-
Q
QR-KM2H-M54
R
R/ -E -11
C ER
Q
-E 11 R-
<6-02>
Q
Q
R
-H -11
R/
HR
E
QR-11-E
<6-07>
C
Q
-H 11 R-
F
Q
<6-03>
-S 11 R-
H
QR-11-H
<6-08>
QR-11-SH FOR SEAT TUBE QR-11-HF/100 FOR FRONT QR-11-HR/135 FOR MTB REAR QR-11-HRC/130 FOR RACING REAR
FOR SEAT TUBE CR-MO AXLE WITH CNC NUT AL6061-T6 LEVER
QR-112H2
-S 11 R-
QR-11-SE FOR SEAT TUBE QR-11-EF/100 FOR FRONT QR-11-ER/135 FOR MTB REAR QR-11-ERC/130 FOR RACING REAR
QR-KM2H-M54F/100 FOR FRONT QR-KM2H-M54R/135 FOR MTB REAR QR-KM2H-M54RC/130 FOR RACING REAR CR-MO AXLE WITH CNC NUT
QR-KM2-SH
F
QR-11G
<6-04>
FOR SEAT TUBE CR-MO AXLE AL6061-T6 LEVER
<6-09>
FOR SEAT TUBE CR-MO AXLE AL6061-T6 LEVER
GUARD BOLT NUT
QR-CLOSE FOR SEAT TUBE STEEL AXLE AL6061-T6 LEVER
6
QR-OPEN
<6-05>
QR-OPEN-H
QR-OPEN-E
FOR SEAT TUBE STEEL AXLE AL6061-T6 LEVER
<6-10>
QR-SPAX-12X
HUB
AXLE
135
168
142
175
150
183
QUICK RELEASE
QR-SPOL-12X
<7-01>
FOR 135mm/142mm/150mm HUB AL7075 AXLE ALLOY LEVER SPEC: Ø12mm HOLLOW AXLE WEIGHT: 83.5 g (150mm)
<7-06>
FOR 135mm/142mm/150mm HUB AL7075 AXLE ALLOY WITH CARBON FIBER LEVER SPEC: Ø12mm HOLLOW AXLE WEIGHT: 76.0 g (150mm)
QR-SM/F/R/RC
QR-SM-R/RC
<7-07>
QR-SM-F/100 WITH DISC PAD QR-SM-R/135 WITH ROLLER AND DISC PAD QR-SM-RC/130 WITH ROLLER AND DISC PAD
QR-SM-F
135mm/130mm ADAPTER
SPAX-121
<7-02>
METERIAL: 7075 T6 LENGTH: 186mm / 206mm SPEC: Ø12mm HOLLOW AXLE 7075 NUT
Chain Washer
QR-SMS
QR-SMW/R/RC
<7-03>
CHAIN HANGER
CHAIN WASHER WITH 135mm/130mm ADAPTER
Key Ring
-5 SP
R 6-
/R
C
Pin type
-5 SP
6-
F
SP-56
SP
<7-04>
FOR SEAT TUBE CR-MO AXLE MATERIAL: AL6061-T6
HR
/H
RC
Cr-mo Hollow Axle Available -5 SP
WITH SPECIAL TOOL TO LOCK & LET OFF SP-56-F/100 FOR FRONT SP-56-R/135 FOR MTB REAR SP-56-RC/130 FOR RACING REAR
SP-66
56
6-
SP-56H
HF
-5 SP
6
H -S
<7-05> BOLT
W
40
24
45
29
50
34
55 60
39 44
CL-AH
CL-AH2-001
CL-AH2-002
Pin type
<7-09>
WITH SPECIAL TOOL TO LOCK & RELEASE AND HOLLOW BOLT & CARBON REINFORCE SP-56-SH FOR SEAT TUBE SP-56-HF/100 FOR FRONT SP-56-HR/135 FOR MTB REAR SP-56-HRC/130 FOR RACING REAR
CL-AH / CL-AH2 W
Beer Opener (P.A.T ED)
W
5mm
135mm/130mm ADAPTER
<7-08>
<7-10>
FOR SEAT TUBE MATERIAL: STEEL HEAT TREATMENT W: 19mm / 22mm / 25mm / 27mm CL-AH2-001 / -002 WITH CNC FINISHED
7
SEAT CLAMP
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Carbon Clamp Light weight design. Clamp with carbon and lightened. Titanium grade M5 screw. P.A.T ED
NE
NE
W
CL-C22
W
CL-FJ21
<8-01>
CARBON WITH AL6061-T6 INSERT DOUBLE TITANIUM M5 x 18mm BOLT SPEC: Ø31.8, Ø34.9 H: 12 mm WEIGHT: 14g
NE
W
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER Oval Hole For Carbon
NE
CL-FJ21-1
W
<8-02>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE Oval Hole For Carbon
CL-07GB-CO
8
<8-03>
SEAT CLAMP WITH COVER COLD FORGED CNC MADE SPEC: Ø27.2 - Ø31.6 SEATPOST Ø31.8 - Ø34.9 SEATPOST H: 17.5; 13 mm COLOR: AS ORDER Oval Hole For Carbon
<8-04>
CL-FJ21-2
<8-05>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE Oval Hole For Carbon
NE
W
CL-15JK
<8-06>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE Oval Hole For Carbon
SEAT CLAMP Oval Hole For Carbon
CL-07CAL-CO
<9-01>
Special Chamfer for carbon frame
CL07JB1-CO
<9-08>
SEAT CLAMP WITH COVER COLD FORGED CNC MADE SPEC: Ø27.2 - Ø31.6 SEATPOST Ø31.8 - Ø34.9 SEATPOST H: 24.5; mm COLOR: AS ORDER Oval Hole For Carbon
SEAT CLAMP WITH COVER COLD FORGED CNC MADE SPEC: Ø27.2 - Ø31.6 SEATPOST Ø31.8 - Ø34.9 SEATPOST H: 17.5; 12 mm COLOR: AS ORDER Oval Hole For Carbon Special Chamfer for carbon frame
CL-07FB1-CO
CL-07FB2-CO (-CI)
<9-02>
<9-09>
COLD FORGED CNC MADE TWO M5 X 18mm BOLT SEAT CLAMP WITH COVER SPEC: Ø27.2 - Ø31.6 SEATPOST Ø31.8 - Ø34.9 SEATPOST H: 17.5; 13 mm COLOR: AS ORDER Oval Hole For Carbon Special Chamfer for carbon frame
SEAT CLAMP WITH COVER COLD FORGED CNC MADE SPEC: Ø27.2 - Ø31.6 SEATPOST Ø31.8 - Ø34.9 SEATPOST H: 17.5; 13 mm COLOR: AS ORDER (-CI: CARBON INSIDE ) Oval Hole For Carbon Special Chamfer for carbon frame
CL-05-15D
CL-07
<9-03>
<9-10>
COLD FORGED CNC MADE SPEC: DIA AS ORDER H: 15mm COLOR: AS ORDER Special Chamfer for carbon frame
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 15 mm COLOR: AS ORDER Oval Hole For Carbon Special Chamfer for carbon frame
CL-07-CI
CL-07-2X
<9-04>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 15mm COLOR: AS ORDER CARBON SHIM INSIDE
CL-07-P CL-07-P-2
<9-11>
COLD FORGED CNC MADE TWO M5 x18mm BOLT SPEC: Ø28.6, Ø31.8, Ø34.9 H: 20 mm COLOR: AS ORDER Oval Hole For Carbon Special Chamfer for carbon frame
<9-05>
CL-07LB
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 15 mm COLOR: AS ORDER Oval Hole For Carbon Special Chamfer for carbon frame
COLD FORGED SPEC: Ø27.2 H: 11 mm COLOR: AS ORDER
CL-H2C
CL-H2C-2
<9-06>
<9-12>
<9-13>
COLD FORGED CNC MADE SPEC: Ø28.6, Ø30, Ø31.8, Ø34.9 Ø36, Ø37, Ø38.1 H: 14 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE Oval Hole For Carbon
COLD FORGED CNC MADE SPEC: Ø28.6, Ø30, Ø31.8, Ø34.9 Ø36, Ø37, Ø38.1 H: 14 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE Oval Hole For Carbon
CL-AD
CL-AD-A1
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 DOUBLE BOLTS H: 24 mm COLOR: AS ORDER Oval Hole For Carbon
<9-07>
<9-14>
COLD FORGED CNC MADE SPEC: Ø28.6, Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE Oval Hole For Carbon
9
SEAT CLAMP
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Clamp With Canti Brake Rotary Hanger
NE
W
CL-55KP10
<10-01>
CANTI BRAKE CABLE HANGER COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 10.5mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
10
CL-CX
<10-02>
CANTI BRAKE CABLE HANGER COLD FORGED SPEC: Ø31.8, Ø34.9 H: 16mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
SEAT CLAMP NE
NE
W
CL-55GB
NE
NE
<11-01>
W
CL-02A
<11-07>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 10.5 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 11 mm COLOR: AS ORDER
CL-02GB
CL-02JB
W <11-02>
<11-08>
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 11 mm COLOR: AS ORDER
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 10.5 mm COLOR: AS ORDER
CL-02K
CL-02P CL-02P-2
<11-03>
<11-09>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 10.5 mm COLOR: AS ORDER
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 10.5 mm COLOR: AS ORDER
CL-030
CL-033K
W <11-04>
<11-10>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9, Ø37, Ø38.1 H: 13.5 mm COLOR: AS ORDER
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 15 mm COLOR: AS ORDER
CL-03JB
CL-03GB
<11-05>
<11-11>
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9, Ø37, Ø38.1 H: 13 mm COLOR: AS ORDER
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 15 mm COLOR: AS ORDER
CL-03P
CL-50
<11-06>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9, Ø37, Ø38.1 H: 13 mm COLOR: AS ORDER
<11-12>
REPLACEABLE FOR SHIMANO® E-TYPE FRONT DERAILLEUR’S SEAT TUBE EYELTE COLD FORGED SPEC: Ø28.6, Ø31.8, Ø34.9 H: 10 mm COLOR: AS ORDER
11
SEAT CLAMP
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
CL-51 CLAMP WITH CABLE STOP COLD FORGED SPEC: Ø31.8, Ø34.9 H: 12 mm COLOR: AS ORDER
M5 THREAD
CL-A1
<12-02>
<12-07>
COLD FORGED SPEC: Ø28.6, Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
CL-A1K
<12-08>
COLD FORGED SPEC: Ø28.6, Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER SPECIAL DESIGN FOR CARBON FRAME
COLD FORGED SPEC: Ø31.8, Ø34.9 H: 14 mm COLOR: AS ORDER SPECIAL DESIGN FOR CARBON FRAME
CL-JMB2
CL-J5B
<12-03>
COLD FORGED CNC MADE SPEC: Ø28.6, Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER
COLD FORGED CNC MADE SPEC: DIA AS ORDER H: 13.5 mm COLOR: AS ORDER
CL-M5B
CL-M7B
<12-04>
COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 13 mm COLOR: AS ORDER
COLD FORGED CNC MADE SPEC: DIA AS ORDER H: 13.5 mm COLOR: AS ORDER
CL-88GB
CL-94B
<12-05>
<12-09>
<12-10>
<12-11>
COLD FORGED SPEC: Ø28.6, Ø31.8, Ø34.9 H: 14.5 mm COLOR: AS ORDER
COLD FORGED + CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 10.5 mm COLOR: AS ORDER
CL-95B
CL-951B
<12-06>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 13 mm COLOR: AS ORDER
12
CL-FR
<12-01>
<12-12>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 13 mm COLOR: AS ORDER
SEAT CLAMP
CL-77B
CL-97GB
<13-01>
COLD FORGED SPEC: Ø25.4, Ø28.6 H: 18 mm COLOR: AS ORDER
COLD FORGED SPEC: DIA AS ORDER H: 15 mm COLOR: AS ORDER
NE
CL-93JB
FOR BMX OR FS COLD FORGED CNC MADE SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 35 mm COLOR: AS ORDER
CL-FDG2-9
FOR FRONT DERAILLEUR SPEC: Ø28.6,Ø31.8, Ø34.9 COLOR: AS ORDER
W
CL-93JB-2-70L-O
<13-10>
FOR BMX OR FS COLD FORGED CNC MADE SPEC: Ø33.3, Ø34.9 H: 70 mm COLOR: AS ORDER INTERNAL HOLES THROUGHOUT
<13-05>
FOR FRONT DERAILLEUR SPEC: Ø31.8, Ø34.9 9°+ 20 mm OFFSET COLOR: AS ORDER
CL-FD
<13-09>
FOR BMX OR FS COLD FORGED CNC MADE SPEC: Ø28.6, Ø31.8, Ø34.9 H: 35 mm COLOR: AS ORDER INTERNAL HOLES THROUGHOUT
NE
FOR BMX OR FS COLD FORGED SPEC: Ø25.4, Ø28.6 H: 35 mm COLOR: AS ORDER
W
CL-93JB-O
<13-03>
<13-04>
<13-08>
FOR BMX OR FS COLD FORGED SPEC: Ø28.6, Ø31.8, Ø34.9 H: 35 mm COLOR: AS ORDER INTERNAL HOLES THROUGHOUT
NE
CL-73B
W
CL-93B-O
<13-02>
FOR BMX OR FS COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 35 mm COLOR: AS ORDER
CL-93B
<13-07>
CL-FDG3
<13-11>
COLD FORGED CNC MADE FOR FRONT DERAILLEUR SPEC: Ø28.6, Ø31.8, Ø34.9 COLOR: AS ORDER OVAL DESIGN BETTER FOR CARBON FRAME
<13-06>
CL-FDM
<13-12>
FOR FRONT DERAILLEUR SPEC: Ø31.8, Ø34.9 COLOR: AS ORDER
13
SEAT CLAMP
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Seat Clamp with
Ultra-lightweight Quick Release Ultimate CNC process - Example of the art CNC machining clamp Perfect combination with the ultra light weight QR
NUT TO LOCK
NE
W
CL-KM2-S
<14-01>
WITH SPECIAL BOLT & NUT TO LOCK COLD FORGED SPEC: Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
CL-KM1
14
<14-02>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
CL-KM2-IT
<14-03>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
CL-KM2
<14-04>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER STANDARD: BLAST ANODIZE
SEAT CLAMP
CL-KM2-CO
<15-01>
COLD FORGED QR CLAMP WITH COVER SPEC: Ø27.2 - Ø31.6 SEATPOST Ø31.8 - Ø34.9 SEATPOST H: 15 ; 13.5 mm COLOR: AS ORDER
CL-OB1
<15-02>
<15-03>
COLD FORGED + CNC MADE SPEC: Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER Oval Hole For Carbon
CL-SPL-BALL
<15-04>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER Oval Hole For Carbon
CL-98QT
<15-07>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 15 mm COLOR: AS ORDER Oval Hole For Carbon
CL-OB2
<15-08>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER Oval Hole For Carbon
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER Oval Hole For Carbon
CL-K
CL-OB72H
CL-K2
<15-09>
COLD FORGED CNC MADE SPEC: Ø31.8, Ø34.9 H: 16 mm COLOR: AS ORDER Oval Hole For Carbon
CL-96QT
<15-10>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9, Ø38.1 H: 13 mm COLOR: AS ORDER
<15-05>
CL-9872E-QT
<15-11>
COLD FORGED SPEC: Ø25.4, Ø28.6, Ø31.8, Ø34.9 H: 13 mm COLOR: AS ORDER
COLD FORGED WITH LONGER LEVER (72mm) SPEC: Ø28.6, Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER
CL-9872H
CL-9872M
<15-06>
COLD FORGED CNC MADE WITH LONGER LEVER (72mm) SPEC: Ø28.6, Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER
<15-12>
COLD FORGED CNC MADE WITH LONGER LEVER (72mm) SPEC: Ø28.6, Ø31.8, Ø34.9 H: 13.5 mm COLOR: AS ORDER
15
HEAD ACCESSORIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
NE
NE
W
TK-SC-12A
W
TK-RB-12B
<16-01>
MATERIAL: AL6061-T6 CNC FINISHED WEIGHT: 9.3 g (W/O STAR NUT) SIZE: 1-1/8”
NE
NE
TK-STICKER
<16-03>
W
TK-BEERA<16-07>
<16-02>
MATERIAL: AL6061 T6 COLD FORGED FINISHED WEIGHT: 9.8 g (W/O STAR NUT) SIZE: 1-1/8” WITH STAR NUT
TK-001S
WITH TK-001S MATERIAL: AL6061 T6 CNC FINISHED WEIGHT: 23 g (W/O STAR NUT) SIZE: 1-1/8”
TK-PH01
<16-08>
MATERIAL: AL6061-T6 WEIGHT: 9.7 g (W/O STAR NUT) SIZE: 1-1/8” WITH STAR NUT
MATERIAL: AL6061-T6 WEIGHT: 12.5 g (W/O STAR NUT) SIZE: 1-1/8” WITH ATR-28.6 AND STAR NUT
TK-A4
TK-M3
<16-04>
<16-09>
MATERIAL: AL6061 T6 WEIGHT: 6.3 g (W/O STAR NUT) SIZE: 1-1/8” WITH 7075 T651 ALLOY BOLT (SILVER) WITH STAR NUT
MATERIAL: AL6061 T6 WEIGHT: 32.5 g (W/O STAR NUT) SIZE: 1”, 1-1/8” STAINLESS HOLLOW M10 BOLT WITH STAR NUT
TK-RB03
TK-AC21
<16-05>
MATERIAL: AL6061-T6 WEIGHT: 5.4 g (W/O STAR NUT) SIZE: 1-1/8” WITH 7075-T651 ALLOY BOLT (SILVER)
16
MATERIAL: AL6061-T6 CNC FINISHED WEIGHT: 9.8 g (W/O STAR NUT) SIZE: 1-1/8”
W
TK-SC-12AP
<16-06>
<16-10>
MATERIAL: AL6061-T6 WEIGHT: 14.0 g (W/O STAR NUT) SIZE: 1-1/8” CR-MO BOLT OR STAINLESS BOLT AVAILABLE WITH STAR NUT
HEAD ACCESSORIES TK-009C-T (TK-009C)
<17-01>
MATERIAL: 100% CARBON STAINLESS BOLT WEIGHT: 14.0 g (W/O STAR NUT) SIZE: 1-1/8” WITH STAR NUT
MATERIAL: TI-64 WEIGHT: 9.5g (W/O STAR NUT) SIZE: 1-1/8” WITH TI-64 BOLT AVAILABLE
TK-001D
TK-001S TK-001S-38.1
<17-02>
MATERIAL: AL6061-T6 WEIGHT: 14.5g (W/O STAR NUT) SIZE: 1”, 1-1/8” STAINLESS BOLT WITH STAR NUT
TK-001S-DIAMOND
Adjust the height (mm) 47.5
65.5
90
47.5
105.5
120
47.5
135.5
<17-07>
MATERIAL: AL6061-T6 WEIGHT: 17.5g (W/O STAR NUT) SIZE: 1”, 1-1/8” or 1-1/2” CR-MO BOLT OR STAINLESS BOLT AVAILABLE WITH STAR NUT
<17-03>
TK-001S-HEART
<17-08>
MATERIAL: AL6061-T6 CNC MADE WEIGHT: 15.5g (W/O STAR NUT) SIZE: 1-1/8” CR-MO BOLT OR STAINLESS BOLT AVAILABLE WITH STAR NUT
TK-001S-CROSS
TK-001S-SPADE
<17-04>
<17-09>
MATERIAL: AL6061-T6 CNC MADE WEIGHT: 16g (W/O STAR NUT) SIZE: 1-1/8” CR-MO BOLT OR STAINLESS BOLT AVAILABLE WITH STAR NUT
MATERIAL: AL6061-T6 CNC MADE WEIGHT: 15.5g (W/O STAR NUT) SIZE: 1-1/8” CR-MO BOLT OR STAINLESS BOLT AVAILABLE WITH STAR NUT
ADP-STEM
TL-18
120 mm
50
<17-06>
MATERIAL: AL6061-T6 CNC MADE WEIGHT: 15.7g (W/O STAR NUT) SIZE: 1-1/8” CR-MO BOLT OR STAINLESS BOLT AVAILABLE WITH STAR NUT
STEERING TUBE EXTEND FOR Ø28.6 FORK MATERIAL: AL6061-T6 LENGTH: 50mm, 90mm, 120mm WITH LONG SCREW AND TOP CAP
90 mm
MAX
50 mm
MIN
TK-001-TI
<17-05>
<17-10>
STAR NUT TOOLING SPEC: Ø25.4mm, 28.6 mm
Tool For Star nut
17
HEAD ACCESSORIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Suggestion W/I TK-001D
P.A.T ED reinforce Carbon Stem Tube
Reinforce
(Old No: TK012WS-CAL will update to this item)
NE L: 45
L: 32
L: 50
L: 70
TK-012SW
<18-01>
FOR CARBON FORK SPEC: 22.0 ~ 23.4 W/O SHIM 23.4 ~ 25.0 W/I SHIM H: 32mm, 50mm, 70mm WEIGHT: 45 g/set (50mm)
ON-42
NE
W
<18-02>
TK-032SW
<18-06>
FOR CARBON Ø31.8 FORK SPEC: Ø27.5 ~ Ø27.7 WITH SHIM LENGTH: 45mm WEIGHT: 44 g/set
OB-8B
<18-07>
MATERIAL: TOP COVER AL6061-T6 SPEC: INTEGRATED, 1-1/8” Upper / 1.5” Bottom UP: Ø28.6 x 41.8 DOWN: 51.8 x 39.5 BEARING: (UPPER)41.8 x 45° x 8 (LOWER) 51.8 x 45° x 8
MATERIAL: TOP COVER AL6061-T6 SPEC: INTEGRATED, 1-1/8” UPPER / 1-1/8” BOTTOM UP: Ø28.6 x 41.8 DOWN: Ø28.6 x 41.8 BEARING: 41.8 x 45° x 8
TK-FA
TK-003C
<18-03>
MATERIAL: AL6061-T6 SPEC: OD-UP Ø34 mm OD-DOWN Ø48 mm H: 15mm
ADP-30A
<18-04>
SHIMANO®
BB30 ADP TO CRANKSET WITH ADP x 2 SEAL BEARING x 2 INNER TUBE x 1 C-RING x 2
<18-05>
MID-BB SET W/I SEAL BEARING FIT MID-BOTTOM BRACKETS SPEC: 19mm, 20mm COLOR: AS ORDER
W
ADP-PF30A
<18-09>
FIX ON PF30 FRAME
NE
BB-TM1
<18-08>
MATERIAL: 100% CARBON CUSTOMER DESIGN AVAILABLE
NE
18
W
W
ADP-BB-ECT7 ECCENTRIC BB SYSTEM
<18-10>
HEAD ACCESSORIES
NE
AC-25.4-H / AC-28.6-H AC-31.8-H / AC-38.1-H <19-01> CARBON SPACER SPEC: AS ORDER H: AS ORDER COLOR: 3K, UD
ACE-28.6-H
<19-02>
CARBON SPACER P.A.T ED SPEC: AS ORDER H: AS ORDER COLOR: 3K, UD
ARK-25.4-H ARK-28.6-H
ARP-28.6-H
<19-05>
ANTI-SOLVENT MATERIAL: NYLON SPEC: Ø28.7 x Ø36 H: 5mm / 10mm COLOR: WHITE, BLUE, ORANGE, LIGHT ORANGE, LIGHT GREEN, GREEN, CLEAR, LIGHT PINK, VIOLET, BLACK WEIGHT: 1.8 g/pcs (5mm)
AC-28.6-H-COLOR
<19-06>
CARBON SPACER SPEC: AS ORDER H: AS ORDER COLOR: GOLDEN, BLUE, RED, SILVER
AR-25.4-H / AR-28.6-H AR-31.8-H / AR-38.1-H
<19-07>
ALLOY SPACER SPEC: AS ORDER H: AS ORDER COLOR: AS ORDER
<19-03>
ALLOY SPACER SPEC: OD Ø32 or Ø35 H: AS ORDER COLOR: AS ORDER
ATR-28.6-5
W
AE-28.6-H
<19-08>
ALLOY SPACER P.A.T ED SPEC: AS ORDER H: AS ORDER COLOR: AS ORDER
<19-04>
ALLOY TAPER SPACER H: 5mm COLOR: AS ORDER SPEC: ID Ø 28.6, OD-UP Ø 32.5mm OPTION: OD-DOWN Ø34 / Ø35 / Ø36mm
19
CHAIN RING SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
NE
TRSK-66
NE
W
TRSK-R6
<20-01>
FOR SHIMANO® CASSETTE MATERIAL:
NE
W
TRSK-TY
<20-02>
FOR DISC HUB 6 HOLE MATERIAL:
COLD FORGED CR-MO STEEL (ASM4140) HEAT TREATED (HARDEN + DOUBLE TEMPLE) N.E.N OR BLACK ED FINISHED TEETH: 16T ~ 23T WEIGHT: 56.0g (16T)
COLD FORGED CR-MO STEEL (ASM4140) HEAT TREATED (HARDEN + DOUBLE TEMPLE) N.E.N FINISH TEETH: 12T, 16T ~ 23T WEIGHT: 62.5g (18T)
TWISTER-T
<20-04>
34T
CX-MU 50/34
53T
<20-05>
39T
CX-MU 53/39
<20-08>
FOR 9, 10 SPEED MATERIAL: AL7075-T651 FULL CNC MADE P.C.D: 110 TEETH: 50T, 34T
FOR 9, 10 SPEED MATERIAL: AL7075-T651 FULL CNC MADE P.C.D: 130 TEETH: 53T, 39T
CX-TRACK
CX-CD
<20-06>
MATERIAL: AL7075-T651 FULL CNC MADE CHAIN SIZE: 3/32”, 1/8” P.C.D: Ø130, Ø144 TEETH: 39 ~ 53 H: 3mm COLOR: AS ORDER 5 ARM FOR SINGLE SPEED
20
<20-07>
MATERIAL: AL7075 T6 TEETH: 12T ~ 18T H: 12mm OPTION: MUTI - SPEED CHAIN 1.37 x 24T
FOR FREEWHEEL GEAR MATERIAL: AL7075 T6 TEETH: 13T ~ 22T H: 6mm
50T
<20-03>
FOR SHIMANO® CASSETTE MATERIAL:
COLD FORGED CR-MO STEEL (ASM4140) HEAT TREATED (HARDEN + DOUBLE TEMPLE) N.E.N OR BLACK ED FINISHED TEETH: 16T ~ 23T WEIGHT: 29.5g (16T)
TWISTER-K
W
<20-09>
MATERIAL: AL7075-T651 FULL CNC MADE CHAIN SIZE: 3/32”, 1/8” P.C.D: Ø130, Ø144 TEETH: 39 ~ 53 H: 3mm COLOR: AS ORDER 5 ARM FOR SINGLE SPEED
CHAIN RING SYSTEM TRSK
<21-05>
FOR SHIMANO® CASSETTE MATERIAL: COLD FORGED CR-MO STEEL (ASM4140) HEAT TREATED (HARDEN + DOUBLE TEMPLE) N.E.N FINISH TEETH: 12T ~ 18T T: 3/32” (1.8mm)
TRSK-F
<21-06>
FOR SHIMANO CASSETTE MATERIAL: COLD FORGED CR-MO STEEL (ASM4140) HEAT TREATED (HARDEN + DOUBLE TEMPLE) N.E.N FINISH TEETH: 13T ~ 20T H: 7mm T: 3/32” (1.8mm) ®
t: 1.8mm h: 7mm
TRST
Orange
M-SH1520
Green
Pink
Purple
Blue
FOR CENTER-LOCK 20mm THRU-AXLE DISC SYSTEM HUB SPEC: OD Ø44 x ID Ø20 COLOR: AS ORDER
LOCK RING
FOR CENTER-LOCK DISC SYSTEM HUB SPEC: OD Ø44 COLOR: AS ORDER
M-HUB
<21-02>
12T
<21-03>
SPACER FOR CASSETTE HUB SPEC: AS ORDER
M-HUB-IT CAMPY® STYLE MATERIAL: AL6061-T6
11T
<21-09>
HUB RING NUT (FREE WHELL) MATERIAL: AL6061-T651 OPTION: 11T (OD:Ø35.5) 12T (OD:Ø38)
AR-HUB-2
<21-10>
SHIMANO®
FOR HUB 11 speed change to 10 speed H: 2mm
SSP-SET-T <21-04>
<21-08>
SHIMANO®
MATERIAL: CR-MO HEAT TREATMENT SPEC: 1.29 x 24L
AR-HUB
MATERIAL: COLD FORGED CR-MO STEEL (ASM4140) HEAT TREATED (HARDEN + DOUBLE TEMPLE) N.E.N FINISH TEETH :12T ~ 23T H: 7mm T: 3/32” (1.8mm), 1/8” (3mm) OPTION: ADD 1.29 x 24T LOCK RING, SURFACE ED FINISHED
M-SH44
<21-01>
SHIMANO®
<21-07>
<21-11>
A: TRSK (12T-18T) CHOOSE 1 pcs B: AR-HUB 10 mm x 2 pcs 5 mm x 1 pcs 3 mm x 4 pcs C: M-HUB x 1
21
CHAIN TENSIONER SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
SSP-12-1 Chain Line Adjustable
SSP-12US-1(34)
<22-01>
MATERIAL: AL6061-T6 T: 16t ~ 20t
Chain Line Adjustable
<22-05>
TWO PULLEY DESIGN MATERIAL: AL6061-T6 SPEC: OUTLINE SPRING DESIGN T: 12t ~ 13t
CC: 68 mm C-
SSP-12US-1(51) Chain Line Adjustable
C:
34
mm
SSP-12US-1(61)
<22-02>
TWO PULLEY DESIGN MATERIAL: AL6061-T6 SPEC: OUTLINE SPRING DESIGN T: 16t ~ 18t
Chain Line Adjustable
<22-06>
TWO PULLEY DESIGN MATERIAL: AL6061-T6 SPEC: OUTLINE SPRING DESIGN T: 19t ~ 20t
C-
mm
mm
51
61
C:
C:
C-
SSP-11
SSP-11-1
<22-03>
<22-07>
2007 CHANGED TO OUT LINEAR SPRING
NOT AVAILABLE IN USA C-C:
: 70
68m
C-C
m
mm
Chain Line Adjustable
SSP-FOOT-11
Chain Line Adjustable
<22-04>
9T PULLEY TYPE FOR SINGLE SPEED MATERIAL: AL6061-T651 CNC MADE
SSP-FOOT-1
<22-08>
BEARING ROLLER TYPE FOR SINGLE SPEED MATERIAL: AL6061-T6 CNC MADE
SET UP
22
BMX SERIES
BB-TM1
ADP-BB-51
<23-01>
MID-BB SET W/I SEAL BEARING FIT MID-BOTTOM BRACKETS SPEC: 19mm, 20mm COLOR: AS ORDER
NE
W
PLUG-H
<23-02>
FOR MTB & BMX MATERIAL: AL6061-T6 SPEC: Ø22.2
<23-06>
USA BB TO EURO BB ADAPTER MATERIAL: AL6061-T6
PLUG-12
PLUG-12 PLUG-13
<23-07>
FOR MTB & BMX MATERIAL: AL6061-T6 SPEC: Ø22.2
PLUG-13
PLUG-24C
<23-03>
FOR RACING BIKE MATERIAL: PLASTIC CARBON FIBER SPEC: Ø22.2
NE
W
M-AI-CRO-3/8 M-AI-CRO-14
<23-04>
π
MATERIAL: CR-MO STEEL HEAT 10 TREATMENT FINISHED SPEC: M14 x 1.0 or 3/8 x 26T COLOR: ED FINISHED (BLACK, BLUE, CP, RED, VIOLET)
U-BRAKE-11
<23-05>
MATERIAL: AL6066 T6 CNC MADE (WITH CLEAR OR BLACK BRAKE PAD) SPEC: REAR, FRONT WEIGHT: 160g COLOR: AS ORDER
PLUG-AL
<23-08>
FOR HANDLE BAR MATERIAL: AL6061-T6 SPEC: Ø22.2 ~ Ø15 T: 3.6 ~ 1.0
M-AI-3/8 M-AI-14
<23-09>
MATERIAL: AL7075-T651 CNC MADE SPEC: M14 x 1.0 & 3/8 x 26T WEIGHT: 7g (14), 11g (3/8”) COLOR: AS ORDER
U-BRAKE-31
π 10
<23-10>
MATERIAL: AL6066 T6 CNC MADE (WITH CLEAR OR BLACK BRAKE PAD) SPEC: REAR, FRONT WEIGHT: 160g COLOR: AS ORDER
23
BMX SERIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
RH-SP25
<24-01>
<24-08>
ALLOY CHAIN ADJUSTER SPEC: Ø14 x14w, Ø10 x10w SHOTER FOR SMALL DROPOUT
ALLOY CHAIN ADJUSTER SPEC: Ø14 x14w, Ø10 x10w S: SINGLE GUIDE SHOTER FOR SMALL DROPOUT
RH-SP28
RH-SP28-S
<24-02>
<24-09>
ALLOY CHAIN ADJUSTER SPEC: Ø14 x14w, Ø10 x10w SHOTER FOR SMALL DROPOUT
ALLOY CHAIN ADJUSTER SPEC: Ø14 x14w, Ø10 x10w S: SINGLE GUIDE SHOTER FOR SMALL DROPOUT
RH-SP38-S
AD-XD
<24-03>
<24-10>
ALLOY CHAIN ADJUSTER SPEC: Ø14 x14w, Ø10 x10w SHOTER FOR SMALL DROPOUT
STEEL CHAIN ADJUSTER SPEC: Ø14 x14w, Ø10 x10w WITH KEY WASHER STOPPER
RH-AT09
RH-AT09-H
<24-04>
<24-11>
CHAIN ADJUSTER FOR 10mm or 14mm DROP-OUT MATERIAL: AL6061-T6 OPTION: 3 DIFFERENT LENGTH BOLT 12mm, 16mm, 18mm
CHAIN ADJUSTER FOR 10mm or 14mm DROP-OUT MATERIAL: AL6061-T6 CNC FINISHED OPTION: 3 DIFFERENT LENGTH BOLT 12mm, 16mm, 18mm
RH-MG
RH-MGC
<24-05>
CHAIN ADJUSTER MATERIAL: AL6061-T6 OPTION: 10mm, 14mm
RH-STAR
RH-112A
<24-12>
CHAIN ADJUSTER MATERIAL: AL6061-T6 CNC FINISHED OPTION: 10mm, 14mm
<24-06>
CHAIN ADJUSTER FOR 10mm DROP-OUT MATERIAL: AL6061-T6
24
RH-SP25-S
RH-ARROW
<24-13>
CHAIN ADJUSTER INVOLUTE PROFILE DESIGN FOR 14mm DROP-OUT MATERIAL: AL6061-T6
<24-07>
CHAIN ADJUSTER FOR 5mm, 7mm DROP-OUT MATERIAL: STEEL BOLT + AL6061-T6 NUT AXLE: 10mm
RH-RD10
<24-14>
ALLOY ADJUSTER SPECIAL DESIGN AVAILABLE MATERIAL: AL7075-T6
BMX SERIES PEG-GLM
PEG-GL-M <25-01>
SPECIAL NUTS FOR 14mm AND 3/8 AXLE MATERIAL: EMS (SWISS) SUPER HARDEN NYLON SPEC: Ø38 x 100 WEIGHT: 90g COLOR: BLUE, YELLOW, WHITE, RED, VIOLET, BLACK, GREEN, ORANGE, PINK
NEW SYSTEM DROP OUT
W/I SPECIAL HARDEN NUTS
W/I SPECIAL HARDEN NUTS
PEG-GL
<25-02>
MATERIAL: EMS (SWISS) SUPER HARDEN NYLON SPEC: Ø40 x 100 WEIGHT: 90g COLOR: BLUE, YELLOW, WHITE, RED, VIOLET, BLACK, GREEN, ORANGE, PINK
PEG-GL-CM
<25-03>
MATERIAL: PEL-GL INSERT W/I HEAT TREATED CR-MO OUTSIDE SPEC: Ø40 x 100 WEIGHT: 150g COLOR: BLUE, YELLOW, WHITE, RED, VIOLET, BLACK, GREEN, ORANGE, PINK
PEG-4130-F
<25-04>
MATERIAL: ASM4130 CR-MO COLD FORGED SPEC: Ø35 x 80, Ø35 x 90 WEIGHT: 200g
PEG-4140-2
<25-05>
MATERIAL: ASM4140 HARDEN AND DOUBLE TEMPER N.E.N TREATMENT, LOW FRACTION, LOW WEAROUT WEIGHT: 180g
NE
W
PEG-7075
<25-06>
MATERIAL: AL7075-T651 SPEC: Ø34 x 100 (WITH 14 / 3/8” ADAPTER) WEIGHT: 114g (WITH 15/14, 15/10 ADAPTER) COLOR: AS ORDER
PEG-GL-SHADOW
<25-07>
MATERIAL: EMS (SWISS) SUPER HARDEN NYLON SPEC: Ø38 x 100 WEIGHT: 70g COLOR: BLUE, YELLOW, WHITE, RED, VIOLET, BLACK, GREEN, ORANGE, PINK
PEG-4130-F4
<25-08>
MATERIAL: ASM4130 CR-MO COLD FORGED HEAT TREATMENT CNC FINISHED SPEC: Ø34 x 100 WEIGHT: 180g (W/I LOCK HOLD)
PEG-MINI
<25-09>
FOR PEGLESS HUB PROTECT AXLE MATERIAL: SCM430 HEAT TREATMENT COLD FORGED CNC MADE SPEC: 3/8 x 26T, M14 x 1.0 LENGTH: 35mm WEIGHT: 65g
25
BMX SERIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Wave technology Hi performance & low lost
CW-GVX
<26-01>
Hi performance & Low lost New system add 2.5mm alloy plate
WAVE Technology
MATERIAL: GLIVORE GV-5H (SWISS) P.A.T ED INTERNATIONAL SPEC: Ø22 (Ø19 ADAPTER) WEIGHT: 23T 55g 25T 65g
Hole: 22 Can ADP To:19 Red part 6061 2mm alloy
26
Green part Grivore GV-5H Combined with alloy.
BMX SERIES NE
NE
W
CXAL-STAR
<27-01>
W
CXAL-11
<27-06>
MATERIAL: AL7075-T651 / AL6061-T651 CNC MADE TEETH: 23 / 25 / 28 / 30 H: 5mm WEIGHT: 58.0g (25T)
MATERIAL: AL7075-T651 / AL6061-T651 CNC MADE TEETH: 23 / 25 / 28 / 30 / 32 H: 5mm WEIGHT: 52.5g (25T)
CXAL-P-5
CXCR-L
<27-02>
MATERIAL: AL7075-T651 / AL6061-T651 TEETH: 23 / 25 / 28 / 30 / 32 H: 5mm WEIGHT: 111g (25T)
<27-07>
MATERIAL: CR-MO STEEL HEAT TREATMENT TEETH: 22 / 23 / 24 / 25 / 28 / 30 / 32 / 33 / 36 H: 3mm WEIGHT: 76g (25T)
Color Option Green
Black
Golden
Silver
CXAL-JK
Red
<27-03>
TURBIN
<27-08>
MATERIAL: AL7075-T651 / AL6061-T651 TEETH: 23 / 25 / 28 / 30 / 32 H: 5mm WEIGHT: 55g (25T)
FOR MTB MATERIAL: AL7075-T651 SPEC: SINGLE SPEED 1/8” ( P.C.D: 64) TEETH: 30/32 H: 5mm WEIGHT: 28.5g (30T)
TORNADO
TORNADO-E
<27-04>
FOR BMX & FREESTYLE MATERIAL: AL7075-T651 SPEC: SINGLE SPEED 1/8” TEETH: 23 / 25 / 28 / 30 / 33 / 36 / 39 H: 6mm WEIGHT: 88.1g (30T)
<27-09>
FOR BMX & FREESTYLE MATERIAL: AL7075-T651 SPEC: SINGLE SPEED 1/8” TEETH: 23 / 25 / 28 / 30 / 33 / 36 / 39 H: 5mm WEIGHT: 85.3g (30T)
Color Option Green
Black
Golden
Silver
TORNADO-FL FOR BMX & FREESTYLE MATERIAL: AL7075-T651 SPEC: SINGLE SPEED 1/8” TEETH: 20 / 23 / 25 H: 5mm WEIGHT: 47g (25T)
Red
<27-05>
TURBULANCE
<27-10>
MULTI-SPEED CHAIN FOR MTB MATERIAL: AL7075-T651 TEETH: 32 / 34 / 36 / 38 H: 5mm WEIGHT: 69.0 (36T)
27
HUB
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
High performance High strength to meet the mechanical design principles of the HUB
HUB-WT-F / HUB-WT-R
<28-01>
DOUBLE SEAL BEARING & STAINLESS BEARING MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 130mm HOLE: (F)16, 20 (R )20, 24 WEIGHT: (F) 114.5g (R) 250.5g COLOR: AS ORDER
NE
28
<28-03>
DOUBLE SEAL BEARING & STAINLESS BEARING MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 130mm HOLE: (F)16, 20 (R )20, 24 WEIGHT: (F) 114.5 g (R) 252g COLOR: AS ORDER
NE
W
HUB-MA-F / HUB-MA-R
HUB-WT-CAMPY
<28-02>
DOUBLE SEAL BEARING & STAINLESS BEARING MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 135mm HOLE: 24, 28, 32 WEIGHT: (F) 165g (R) 273g COLOR: AS ORDER
W
HUB-MA10-F / HUB-MA10-R <28-04> FOR 10mm QUICK RELEASE DOUBLE SEAL BEARING & STAINLESS BEARING MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 135mm HOLE: 24, 28, 32 WEIGHT: (F) 165g (R) 273g COLOR: AS ORDER
HUB
HUB-FAT1-FN HUB-FAT1-RN
HUB-FAT2-FN HUB-FAT2-RN
<29-01>
DOUBLE SEAL BEARING FIXED / FIXED (REAR) MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 120mm HOLE: 32, 36 WEIGHT: (F) 306g (R) 363g COLOR: AS ORDER
DOUBLE SEAL BEARING FIXED / FIXED (REAR) MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 120mm HOLE: 32, 36 WEIGHT: (F) 339g (R) 378g COLOR: AS ORDER
HUB-FAT1-RW HUB-FAT2-RW
HUB-DS1-F HUB-DS1-R
<29-02>
DOUBLE SEAL BEARING FIXED / FREE WHEEL MATERIAL: AL6066 T6 SPEC: FRONT 100 mm / REAR 120 mm HOLE: 32, 36 WEIGHT: FAT1-RW 323g FAT2-RW 379g COLOR: AS ORDER
15mm
13mm
TL-1315
15mm
LOCK RING
TL-1544
<29-03>
FOR FIXED GEAR HUB MATERIAL: AL7075-T651 SPEC: M9 x 1.0, M10 x 1.0 LENGTH: 14mm, 18mm M-FX-R
<29-07>
MATERIAL: STAINLESS STEEL HARDEN HIGH POLISH FINISHED SPEC: 15mm NUT / LOCKRING (OD Ø42 ~ Ø44) WEIGHT: 79.5g
NE
M-FX-F / M-FX-R
<29-06>
DOUBLE SEAL BEARING DISK BRAKE FIXED MATERIAL: AL6066-T6 SPEC: FRONT 100mm / REAR 135mm HOLE: 32, 36 WEIGHT: (F) 330g (R) 387g COLOR: AS ORDER
MATERIAL: STAINLESS STEEL HARDEN HIGH POLISH FINISHED SPEC: 15mm / 13mm / BEER OPEN WEIGHT: 56g
M-FX-F
<29-05>
<29-04>
π 10
W
M-FXS
<29-08>
FOR FIXED GEAR HUB MATERIAL: CR-MO HEAT TREATED SPEC: M9 x 1.0, M10 x 1.0 LENGTH: 14.6mm OPTION: SURFACE ED FINISHED
π 10
29 Red
Blue
Gold
Green
WHEELSET
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
NE
WSE-CR1-F / WSE-CR1-R<30-01> HIGH POLISH ANODIZE HUB 38mm CARBON ALLOY COMPOSITE CLINCHER RIM PILLAR SPOKE: BUTTED AERO HOLD: (F) 16, 20 (R) 20, 24 WEIGHT: (F) 777.5g (R) 938g FEATURE: CAMPY速 CASSETTE AVAILABLE
NE
W
Ra cin g
WSE-CR3-R
W
Ra cin g
<30-02>
HIGH POLISH ANODIZE HUB 78mm CARBON ALLOY COMPOSITE CLINCHER RIM PILLAR SPOKE: BUTTED AERO HOLD: (R) 20, 24 WEIGHT: (R) 1210g FEATURE: CAMPY速 CASSETTE AVAILABLE
NE
RaW cin g
WSE-CR2-F / WSE-CR2-R<30-03> HIGH POLISH ANODIZE HUB 58mm CARBON ALLOY COMPOSITE CLINCHER RIM PILLAR SPOKE: BUTTED AERO HOLD: (F) 16, 20 (R) 20, 24 WEIGHT: (F) 908.7g (R) 1049g FEATURE: CAMPY速 CASSETTE AVAILABLE
30
WHEELSET
NE
WSE-W2-F / WSE-W2-R
NE
W
Ra cin g
<31-01>
WSE-W1-F / WSE-W1-R
NE
<31-02>
<31-04>
20mm SUPER LIGHT WEIGHTS ALUMINUM CLINCHER RIM PILLAR SPOKE: PSR STANDRAD 6-BOLT ROTOR MOUNT HOLD: (F) 24/28/32 (R) 24/28/32 WEIGHT: (F) 725g (R) 933g COLOR: HIGH POLISH ANODIZE HUB RIM CARBON COATING
WSE-FIX-CR1
W
MT B
WSE-MA-F / WSE-MA-R
<31-03>
20mm SUPER LIGHT WEIGHTS ALUMINUM CLINCHER RIM PILLAR SPOKE: PSR STANDRAD 6-BOLT ROTOR MOUNT HOLD: (F) 24/28/32 (R) 24/28/32 WEIGHT: (F) 693g (R) 800g COLOR: HIGH POLISH ANODIZE HUB RIM BLACK or WHITE
NE
W
MTB
WSE-MAC-F / WSE-MAC-R
Ra cin g
HIGH POLISH ANODIZE HUB 27mm ALLOY RIM (BLACK or WHITE) PILLAR SPOKE: DOUBLE BUTTED HOLD: (F) 16, 20 (R) 20, 24 WEIGHT: (F) 690g (R) 870g FEATURE: CAMPY速 CASSETTE AVAILABLE
HIGH POLISH ANODIZE HUB 27mm ALLOY RIM (CARBON COATING) PILLAR SPOKE: BUTTED AERO HOLD: (F) 16, 20 (R) 20, 24 WEIGHT: (F) 715g (R) 885g FEATURE: CAMPY速 CASSETTE AVAILABLE
NE
W
NE
W
Fix G ear
<31-05>
HIGH POLISH ANODIZE HUB 38mm CARBON ALLOY COMPOSITE CLINCHER RIM PILLAR SPOKE: SINGLE BUTTED HOLD: 32, 36 WEIGHT: (F) 1125g (R) 1182g
WSE-FIX-AL1
W
Fix G ear <31-06>
HIGH POLISH ANODIZE HUB 42mm HIGH POLISH ALLOY RIM PILLAR SPOKE: SINGLE BUTTED HOLD: 32, 36 WEIGHT: (F) 1215g (R) 1272g
31
CHAIN GUIDE SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
NE
W
CH-ROAT1
<32-01>
NEW DESIGN THE LOWER ARM OF THE BOOMERANG TO FLEX OUT OF THE WAY UPON IMPACT WITH ADP-N FOR NORMAL MATERIAL: AL6061-T6 AND HEAT TREATED STEEL SPEC: ISCG, ISCG-05 FIX 32T ~ 38T
CH-ER
CH-EX
<32-02>
MUST ADDED CHAIN RING PROTECTOR WITH ADP-N FOR NORMAL SPEC: ISCG, ISCG-05 FIX: 32T ~ 38T OPTION: DKPC-13
WITH ADP-N FOR NORMAL MATERIAL: AL6061-T6 SPEC: ISCG, ISCG-05 FIX: 32T ~ 38T
CH-ER-E
CH-EX-E
<32-03>
<32-07>
MUST ADDED CHAIN RING PROTECTOR WITH ADP-N FOR NORMAL SPEC: ISCG, ISCG-05 FIX: 32T ~ 38T OPTION: DKPC-13
WITH ADP-N FOR NORMAL MATERIAL: AL6061-T6 SPEC: ISCG, ISCG-05 FIX: 32T ~ 38T
CH-MTS
CH-EX-S
<32-04>
CHAIN KEEPER FOR MTB 1x9 OR 1x10 DRIVE TRAIN WITH CH-EX PLASTIC UPPER GUARD BB MOUNT VERSION ONLY MATERIAL: AL6061-T6 COLOR: BLACK INCLUDES SPACERS FOR FINE CHAINLINE ADJUSTABILITY
CH-CM1
<32-08>
WITH ADP-N FOR NORMAL MATERIAL: HARDEN STEEL SPEC: ISCG, ISCG-05 FIX: 32T ~ 38T
<32-05>
CHAIN KEEPER FOR MTB 1x9 OR 1x10 DRIVE TRAIN WITH CH-EX PLASTIC UPPER GUARD MATERIAL: AL6061-T6 DIA: Ø34.9 WITH ADAPTER TO Ø31.8 COLOR: BLACK CHAINLINE ADJUSTABILITY
32
<32-06>
CH-CM2
<32-09>
CHAIN KEEPER FOR MTB 1x9 OR 1x10 DRIVE TRAIN WITH CH-EX PLASTIC UPPER GUARD BB MOUNT VERSION ONLY MATERIAL: AL6061-T6 DIA: Ø34.9 WITH ADAPTER TO Ø31.8 COLOR: BLACK CHAINLINE ADJUSTABILITY
CHAIN GUIDE SYSTEM NE
NE
W
CH-EMP
CH-EMR
<33-01>
ROLLER TYPE DESIGN MATERIAL: AL6061-T6 CNC MADE SPEC: ISCG, ISCG-05 FIX: 32T ~ 44T
CH-261
CH-269
<33-02>
<33-06>
WITH ADP-N FOR NORMAL SPEC: ISCG FIX: 32T ~ 38T OPTION: DKPC-13
WITH ADP-N FOR NORMAL SPEC: ISCG FIX: 32T ~ 38T OPTION: DKPC-13
CH-17S
CH-25
<33-03>
<33-07>
WITH ADP-N FOR NORMAL SPEC: ISCG, ISCG-05 FIX: 32T ~ 42T
NE
W
CH-21X
W
CH-21R
<33-04>
MATERIAL: STEEL HEAT TREATMENT SPEC: NORMAL, E-TYPE FIX: 32T, 38T
CH-2GC
<33-05>
PULLEY TYPE DESIGN MATERIAL: AL6061-T6 CNC MADE SPEC: ISCG, ISCG-05 FIX: 32T ~ 44T
MATERIAL: STEEL SPEC: E-TYPE FIX: 32T~40T
NE
W
<33-08>
MUST ADD CHAINRING PROTECTOR MATERIAL: STEEL HEAT TREATMENT SPEC: NORMAL, E-TYPE FIX: 32T, 38T OPTION: DKPC-10, DKPC-13
<33-09>
ROLLER TYPE DESIGN MATERIAL: AL6061-T6 CNC MADE SPEC: ISCG, ISCG-05 E-TYPE FIX: 32T ~ 44T
ISCG-05
CH-08
<33-10>
ROTATING & FLOATING CHAIN TENSIONER
E-TYPE
CH-09
<33-11>
ROTATING & FLOATING CHAIN TENSIONER
ISCG
CH-092 <33-12> FOR SIDE CHAIN STAY
33
CHAIN GUIDE SYSTEM NE
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
W
FTP-36 / FTP-53H FTP-53E / FTP-0352
FTP-36
FTP-53E
FTP-53H
P.A.T ED
NE
FTP-0352
<34-01>
CHAIN DROP PROTECTOR FOR RACING BIKE NEAR CHAINRING RANGE: 36t ~ 46t (FTP-36) 34t ~ 50t, 39t ~ 53t (FTP-53) TRIPLE (FTP-0352) WEIGHT: 10g (FTP-36), 12g (FTP-53E) 11g (FTP-53H), 9.2g (FTP-0352) COLOR: AS ORDER
W
FTP-AERO
FTP-CL
<34-02>
COLD FORGED AL6061-T6 RANGE: 34t ~ 50t & 39t ~ 53t
CH-X9
CHAIN DROP PROTECTOR FOR RACING BIKE NEAR CHAINRING SPEC: Ø31.8, Ø34.9 WEIGHT: 29.1g
DKPC-104-32 / 44
<34-03>
W
DKPC-10
DKPC-13
<34-04>
MATERIAL: PLOY CARBONATE CNC MADE P.C.D: Ø104 (36T~38T) H: 10 mm
DKA3
<34-05>
W
DKA4
MATERIAL: AL6061-T6 CNC MADE P.C.D: Ø104, Ø110, Ø130 SPEC: Ø178 (42T), Ø188 (46T) TEETH: AS ORDER H: 3 mm
MATERIAL: AL6061-T6 CNC MADE P.C.D: Ø104 SPEC: 36T to 38T H: 4 mm
DKA-104-32A
DKA-104-38A
<34-06>
MATERIAL: AL6061-T6 CNC MADE
<34-09>
MATERIAL: PLOY CARBONATE CNC MADE P.C.D: Ø104 (32T~44T) H: 13 mm
NE
34
<34-08>
MATERIAL: PLOY CARBONATE CNC MADE P.C.D: Ø104 (32T~44T) H: 9 mm
CHAIN DROP & CHAIN SUCK PREVENT FOR MTB WEIGHT: 12.5g COLOR: AS ORDER
NE
<34-07>
MATERIAL: AL6061-T6 CNC MADE TEETHE: 36T to 38T
<34-10>
<34-11>
SEATPOST NE
SPC-11
<35-01>
MATERIAL: BODY: AL6061-T6 TUBE: UD CARBON SADDLE CLAMP: CARBON CLAMP PROTECT CARBON RAIL SPEC: Ø27.2, Ø30.9, Ø31.6 LENGTH: 300 / 350 / 400mm OFFSET: 20mm WEIGHT: 235g (Ø31.6 350mm)
SPA-11A
NE
W
<35-02>
MATERIAL: BODY: AL6061-T6 TUBE: AL6066-T6 SADDLE CLAMP: COLD FORGED AL6061-T6 SPEC: Ø27.2, Ø31.6 LENGTH: 300 / 350 / 400mm OFFSET: 20mm WEIGHT: 307g (Ø31.6 350mm)
SPC-H2
<35-03>
MATERIAL: BODY: AL6061-T6 TUBE: UD CARBON OR 3K WOVEN SADDLE CLAMP : COLD FORGED AL6061-T6 SPEC: Ø31.6 LENGTH: 300 / 350 / 400mm OFFSET: 20mm WEIGHT: 340g (Ø31.6 350mm)
NE
SPA-H2-A
W
<35-04>
MATERIAL: BODY: AL6061-T6 TUBE: AL6066-T6 SADDLE CLAMP: COLD FORGED AL6061-T6 SPEC: Ø31.6 LENGTH: 300 / 350 / 400mm OFFSET: 20mm WEIGHT: 372g (Ø31.6 350mm)
W
SPC-116 CNC
<35-08>
INTEGRATED DESIGN CLAMP MATERIAL: AL6061-T6 CNC MADE SPEC: ISP - CLAMP Ø35
SPC-SL2
<35-05>
MATERIAL: BODY: AL6061-T6 TUBE: UD CARBON OR 3K WOVEN CARBON CLAMP PROTECT CARBON RAIL SPEC: Ø27.2, Ø31.6 LENGTH: 300 / 350 / 400mm OFFSET: 0mm WEIGHT: 290g (Ø31.6 350mm)
SPC-102 SPG-102
SLEEVE-11 <35-06>
WITH ALLOY TUBE RENFORCE SPEC: Ø27.2, Ø31.6 LENGTH: 250 / 300 / 350 AVAILABLE OFFSET: 20mm WEIGHT: 319g (Ø31.6 350mm)
SPC-ML
<35-07>
SPECIAL FOR MONOLINK SADDLE MATERIAL: BODY: AL6061-T6 TUBE : UD CARBON SPEC: Ø30.9, Ø31.6 LENGTH: 300 / 350 mm OFFSET: 15mm WEIGHT: 230g (Ø31.6 350mm)
SLEEVE-NH
SLEEVE
<35-09>
MATERIAL: AL6061-T6 SPEC: AS ORDER LENGTH: AS ORDER
35
BRAKE SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
CANTI-ST4670A
<36-01>
MATERIAL: STAINLESS DOUBLE PLATE HIGH POLISH FINISHED
*(5;0 (
CANTI-66L0A
CANTI-5570A
<36-05>
MATERIAL: AL6061-T6
CANTI-5570A
<36-02>
MATERIAL: AL6061-T6
CANTI-67L0A
<36-06>
MATERIAL: AL6061-T6
CANTI-66L0A CANTI-67L0A
NEW ADJ. BRAKE SYSTEM
V70-BRAKE
<36-07>
MATERIAL: AL6061-T6
V70-Brake
Features: * Double plate design. * Brake shoes position adjustable function. (P.A.T.) * Brake pads angle adjustable function. (P.A.T.) * Balance spring power adjustable. (P.A.T.) * Most economy way to design & make new brakes for canti or V-brake available.
CANTI-1C
<36-03>
NON SPRING ADJUSTABLE
CANTI-3C
<36-08>
WITH ASHIMA DARK BLUE NON SPRING ADJUSTABLE
<36-04>
WITH OVAL PADS HOLD DESIGN WITH ASHIMA DARK BLUE BRAKE SHOES OPTION: SWISS STOP PDAS CNC CAS+5 HOLDER FOR FRONT CNC CAS-5 HOLDER FOR REAR NON SPRING ADJUSTABLE
36
CANTI-2C
CANTI-CARBON-4
<36-09>
WITH OVAL PADS HOLD DESIGN WITH ASHIMA DARK BLUE BRAKE SHOES MATERIAL: AL6061-T6 WITH CARBON COATING OPTION: SWISS STOP PDAS CNC CAS+5 HOLDER FOR FRONT CNC CAS-5 HOLDER FOR REAR NON SPRING ADJUSTABLE
BRAKE SYSTEM NE
W
JULY-7905-CNC
NE <37-01>
W
MATERIAL: AL6066-T6 CNC MADE BRAKE SHOES: CNC CASSETTE BOLT: MAIN BOLT TI-64 DIMENSION: C-C 39-51mm OPTION: SWISS STOP CARBON RIM PADS AVAILABLE COLOR: POLISH ANODIZE WEIGHT: 210 g
SWISS STOP
NE
W
CAMP-94773
JULY-7905-F5
<37-06>
MATERIAL: AL6061 T6 FORGED BRAKE SHOES: FORGED CASSETTE BOLT: MAIN BOLT CR-MO DIMENSION: C-C 39-51mm OPTION: ASHIMA CARBON PADS AVAILABLE COLOR: POLISH ANODIZE WEIGHT: 230 g
NE <37-02>
W
CAMP-94773H
<37-07>
MATERIAL: AL6061-T6 FORGED CNC MADE BRAKE SHOES: ASHIMA DARK BLUE DIMENSION: C-C 47-73 mm COLOR: SAND BLAST ANODIZE WEIGHT: 370 g/bike
MATERIAL: AL6061-T6 FORGED CNC MADE BRAKE SHOES: ASHIMA DARK BLUE DIMENSION: C-C 47-73 mm COLOR: SAND BLAST ANODIZE WEIGHT: 343 g/bike
CAMP-97C
CAMP-97C-R
<37-03>
REVERSED MATERIAL: AL6066-T6 CNC MADE DIMENSION: C-C 39-51 mm (+2mm THAN NORMAL) WEIGHT: 310 g/bike PRICE: W/O BRAKE SHOES
MATERIAL: AL6066-T6 CNC MADE DIMENSION: C-C 39-51 mm (+2mm THAN NORMAL) WEIGHT: 310 g/bike PRICE: W/O BRAKE SHOES
CAMP-97C-L
<37-08>
<37-04>
MATERIAL: AL6066-T6 CNC MADE DIMENSION: C-C 47-57 mm WEIGHT: 367 g/bike PRICE: W/O BRAKE SHOES
SWISS STOP
JULY-M12
<37-05>
TRADITIONAL RIM VERSION 19~22mm MATERIAL: AL6066-T6 CNC MADE BRAKE SHOES: CNC CASSETTE BOLT: MAIN BOLT TI-64 DIMENSION: C-C 39-51 mm OPTION: SWISS STOP CARBON RING PADS AVAILABLE COLOR: POLISH ANODIZE WEIGHT: 205 g/bike
JULY-M1227
<37-09>
SWISS STOP
WIDE RIM VERSION 25~28mm MATERIAL: AL6066-T6 CNC MADE BRAKE SHOES: CNC CASSETTE BOLT: MAIN BOLT TI-64 DIMENSION: C-C 39-51 mm OPTION: SWISS STOP CARBON RING PADS AVAILABLE COLOR: POLISH ANODIZE WEIGHT: 210 g/bike
37
BRAKE SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
ADJ.
V3L-BRAKE
V2
<38-01>
MATERIAL: AL6061 T6 CNC MADE SPEC: 60mm LONG RANGE ADJUSTABLE WEIGHT: 210 g/pair COLOR: S/BLASTING AS ORDER
CHANGE FROM COIL SPRING TO LINNER SPRING BALANCE ADJUSTABLE MATERIAL: AL7075 T6 FULL CNC MADE WEIGHT: 150 g/wheel COLOR: S/BLASTING AS ORDER
W
V4-BRAKE
EASY SPRING BALANCE ADJUSTABLE MATERIAL: AL7075-T6 FULL CNC MADE WEIGHT: 155 g/wheel COLOR: AS ORDER
ADJ.
V3L-LEVER
<38-02>
<38-08>
FOR V-BRAKE THREE FINGER MATERIAL: AL6066-T6 FULL CNC MADE WEIGHT: 70 g/pair COLOR: S/BLASTING AS ORDER BAR: Ø24mm with Ø22.2 SHIM
≤Ø7 .2 m m
NE
<38-07>
≤6 . 2 mm
<38-03>
≤Ø7 . 2 m m
FOR CANTI & CALIDER BRAKE TWO FINGER MATERIAL: AL6066-T6 FULL CNC MADE LEVER RANGE: 102mm WEIGHT: 85 g/pair COLOR: S/BLASTING AS ORDER BAR: Ø24mm with Ø22.2 SHIM ≤6 .2 m m
CT3L-LEVER
≤6 . 2 mm
NE
W
TT-LEVER-CARBON<38-04>
TT-LEVER
COLD FORGED LEVER & UD COATING NYLON+CARBON FIBER BODY AERODYNAMICS DESIGN WEIGHT: 95 g/gair
COLD FORGED LEVER NYLON+CARBON FIBER BODY WEIGHT: 95 g/pair COLOR: S/BLASTING AS ORDER AERODYNAMICS DESIGN
CAS-1
CAS+5 / CAS-5
<38-05>
MATERIAL: AL6066-T6 CNC MADE OPTION: ASHIMA DARK BLUE OR RED ONLY BOLT: TI-64 SHIMANO® SYSTEM
NE
W
CAS-62C
<38-06>
ANGLE ADJUSTABLE BRAKE SHOES MATERIAL: FORGED WITH CNC MADE OPTION: ASHIMA DARK BLUE OR RED ONLY
<38-10>
<38-11>
ANGLE ADJUSTABLE BRAKE SHOES MATERIAL: AL6066-T6 CNC MADE SPEC: -5mm FOR BETTER CLEAR REAR BRAKE +5mm FOR BETTER CLEAR FRONT BRAKE OPTION: ASHIMA DARK BLUE OR RED ONLY
+5mm
38
<38-09>
FOR CANTI & CALIPER BRAKE THREE FINGER MATERIAL: AL6066-T6 FULL CNC MADE WEIGHT: 70 g/pair COLOR: S/BLASTING AS ORDER BAR: Ø24mm with Ø22.2 SHIM
≤Ø7 . 2 m m
CT32-LEVER
CAS-72C
-5mm
<38-12>
ANGLE ADJUSTABLE BRAKE SHOES MATERIAL: FORGED WITH CNC MADE LENGTH: 72mm
WATER BOTTLE & CAGE NE
W
WB-101C / WB-102C / WB-103C
CAGE
S
<39-01>
MATERIAL: CARBON UD FINISHED + PLASTIC VOLUME: (L) 600cc; (S) 300cc WEIGHT: (L) 82.5g; (S) 62.5g; (CAGE) 26g OPTION: WB-101C: WATER BOTTLE(L) x 2 + CAGE x 1 WB-102C: WATER BOTTLE(S) x 2 + CAGE x 1 WB-103C: WATER BOTTLE(L) x 1 + (S) x 1 + CAGE x 1
L
WB-0735L WB-0735R
<39-02>
WB-15C
<39-06>
MATERIAL: CARBON FIBER WITH ALLOY WEIGHT: 45g
MATERIAL: CARBON FIBER WITH ALLOY WEIGHT: 37.5g
WB-0823
WB-220
<39-03>
MATERIAL: CARBON FIBER WITH ALLOY WEIGHT: 34.5g
NE
WB-TT1
<39-04>
CLAMPING THE WATER BOTTLE CAGE FOR TRIATHLON BAR BUNDLE FOR EASY HOLD MATERIAL: AL6061-T6
NE
<39-05>
CLAMPING THE WATER BOTTLE CAGE FOR TRIATHLON BAR AL6061-T6 CNC MADE SINGLE CLAMP
W
WB-TT2
<39-08>
CLAMPING THE WATER BOTTLE CAGE FOR TRIATHLON BAR TOUCH FASTENER FOR EASY HOLD MATERIAL: AL6061-T6 or CARBON COATING
NE
W
WT-TT-CLAMP
MATERIAL: CARBON FIBER WITH ALLOY WEIGHT: 34.5g
NE
W
<39-07>
W
WT-TT-CLAMP-2X
<39-09>
CLAMPING THE WATER BOTTLE CAGE FOR TRIATHLON BAR AL6061-T6 CNC MADE DOUBLE CLAMP FROM BOTH SIDES
39
35 System
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
35 System Batter feeling to handle and reduce the probability of deformation while riding.
NE
W
STEM-LB35A
<40-01>
MATERIAL: AL6066-T6 SPEC: 80~140mm, ANGLE: ±8° FORK STACK HEIGHT 40mm Ø31.8 HANDLE-BAR CLAMP Ø35 WEIGHT: 142g (110mm) OPTION: TITANIUM BOLT, STAINLESS STEEL BOLT
SHIM-3x2
SHIM-CC
<40-02>
MATERIAL: CARBON SPEC: OD Ø35 x ID Ø31.8 OD Ø31.8 x ID Ø26 OD Ø31.8 x ID Ø25.4
MATERIAL: CARBON UD SPEC: OD Ø31.8 x ID Ø28.6 H: 38mm, 58mm, 78mm
AC-31.8-36-H
AC-28.6-36-H
<40-03>
CARBON SPACER SPEC: OD Ø36 & ID Ø32 H: AS ORDER COLOR: 3K, UD
TK-32A 40
<40-05>
<40-04>
FOR Ø31.8 FORK MATERIAL: AL6061-T6 CR-MO BOLT OR STAINLESS BOLT AVAILABLE WEIGHT: 11.8g
<40-06>
CARBON SPACER SPEC: OD Ø36 & ID Ø28.6 H: AS ORDER COLOR: 3K, UD
TK032SW
<40-07>
FOR CARBON Ø31.8 FORK SPEC: Ø27.5 ~ Ø27.7 WITH SHIM LENGTH: 45 mm WEIGHT: 44g
STAR NUT-29
<40-08>
FOR Ø31.8 ALLOY/CR-MO FORK SPEC: Ø28.8
STEM-LB1
g m m :1 40
14 0
g
m m :1 31 g
13 0
m m :1 28
12 0
g 11 0m m :1 25 g
m m :1 23 10 0
m m :1 21 g 90
m m :1 17 g
80
70 m m :1 14 g
m m :1 11 g
60
50
m m :1 07 g
STEM
<41-01>
MATERIAL: AL6066-T6 SPEC: 50~140mm, ANGLE: ±6° FORK STACK HEIGHT 35mm 1 1/8 HANDLE-BAR CLAMP Ø31.8 WEIGHT: 128g (120mm) OPTION: TITANIUM BOLT STAINLESS STEEL BOLT
STEM-011
<41-02>
P.A.T ED CNC MACHINE STEM CUOSTOMER DESIGN AVAILABLE MATERIAL: AL6066-T6 SPEC: 90~140mm, ANGLE: ±6° WEIGHT: 137g (120mm) OPTION: TITANIUM BOLT STAINLESS STEEL BOLT
STEM-T1
<41-05>
TIG WELD STEM MATERIAL: AL6066-T651 SPEC: 70 ~ 140mm, ANGLE: ±6° or ±10° WEIGHT: 160g (120mm) OPTION: TITANIUM BOLT STAINLESS STEEL BOLT
BODY SECTION
SM-21
<41-03>
MATERIAL: AL6061-T6 CNC MADE SPEC: STEERING TUBE Ø28.6 DIA: Ø25.4, Ø28.6, Ø31.8 WEIGHT: 309g
SM-2550
<41-06>
MATERIAL: AL6061 T6 CNC MADE SPEC: STEERING TUBE Ø28.6 DIA: Ø25.4, Ø28.6, Ø31.8 WEIGHT: 235.5g
CUSTOMER DESIGN AVAILABLE SM-31
<41-04>
MATERIAL: AL6061 T6 CNC MADE SPEC: STEERING TUBE Ø28.6 DIA: Ø25.4, Ø28.6, Ø31.8 WEIGHT: 271.5g
SM-K3
<41-07>
MATERIAL: AL6061 T6 CNC MADE SPEC: STEERING TUBE Ø28.6 DIA: Ø25.4, Ø28.6, Ø31.8 WEIGHT: 267.5g
41
H-BAR SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
Stiff & Light innovation
NE
HB-RBC1
<42-01>
MATERIAL: CARBON FIBER SPEC: Ø35mm x W400mm / 420mm / 440mm (C-C) DROP: 128mm REACH: 78mm BAR TYPE: COMPACT WEIGHT: 225g (W420mm)
MATERIAL: CARBON 100% SPEC: Ø31.8 x W400mm / W420mm / W440mm (C-C) DROP: 130mm REACH: 80mm BAR TYPE: ANATOMIC-BEND WEIGHT: 216g (W420mm)
<42-02>
MATERIAL: CARBON 100% SPEC: Ø31.8 x W400mm / W420mm / W440mm (C-C) DROP: 130mm REACH: 80mm BAR TYPE: COMPACT WEIGHT: 216g (W420mm)
42
ø80
ø80
W
130
NE
HB-RBC1-1
<42-03>
130
HB-RBC2/35
NE
W
HB-RBC1
ANATOMIC-BEND
R50 R100
HB-RBC1-1 COMPPACT
W
H-BAR SYSTEM
NE
NE
W
W
HB-MBR-780/35 MATERIAL: CARBON FIBER SPEC: Ø35mm x W780mm RISE: 20mm BACK SWEEP: 9 DEGREE UP SWEEP: 5 DEGREE WEIGHT: 279g
HB-MBR-780/32
NE
W
W
W
<43-03>
MATERIAL: AL6066 T6 SPEC: Ø35mm x W780mm RISE: 20mm BACK SWEEP: 9 DEGREE UP SWEEP: 5 DEGREE WEIGHT: 427.5g
HB-MABR-780/32 NE
<43-02>
MATERIAL: CARBON FIBER SPEC: Ø31.8mm x W780mm RISE: 20mm BACK SWEEP: 9 DEGREE UP SWEEP: 5 DEGREE WEIGHT: 273g
HB-MABR-780/35
NE
<43-01>
<43-04>
MATERIAL: AL6066 T6 SPEC: Ø31.8mm x W780mm RISE: 20mm BACK SWEEP: 9 DEGREE UP SWEEP: 5 DEGREE WEIGHT: 382g
HB-MABR-720/32
<43-05>
LIGHT WEIGHT VERSION MATERIAL: AL6066 T6 SPEC: Ø31.8mm x W720mm RISE: 20mm BACK SWEEP: 9 DEGREE UP SWEEP: 5 DEGREE WEIGHT: 260g
HB-MBR-601C NE
<43-06>
MATERIAL: CARBON 100% COATING BLACK SPEC: Ø31.8mm x W660mm WEIGHT: 178g
W
HB-ECT-720
<43-07>
MATERIAL: AL6066-T6 SPEC: Ø31.8mm x W720mm ECCENTRIC: 5mm BACK SWEEP: 9 DEGREE WEIGHT: 235g
HB-MRS-602C
<43-08>
MATERIAL: CARBON 100% COATING BLACK SPEC: Ø31.8mm x W580mm WEIGHT: 160g
43
H-BAR SYSTEM
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
COMPUTER MOUNT FOR Ø31.8mm HANDLEBAR
NE
W
ADP-ORG26
<44-01>
WITH CARBON TUBE Ø26 MATERIAL: AL6061-T6 SPEC: Ø31.8 W: 46mm WEIGHT: 32g
ADP-3R
W
ADP-ORG26-A
<44-04>
WITH AL6061-T6 TUBE Ø26 MATERIAL: AL6061-T6 SPEC: Ø31.8 W: 46mm WEIGHT: 43g COLOR: AS ORDER
<44-02>
ADP-3RC
<44-05>
CNC CLAMP + ALLOY TUBE WITH SEAM: R051 (Ø31.8 x Ø25.4 x 11w) R056 (Ø31.8 x Ø26 x 11w) SPEC: Ø31.8 x Ø22.2
CNC CLAMP + CARBON TUBE WITH SEAM: R051 (Ø31.8 x Ø25.4 x 11w) R056 (Ø31.8 x Ø26 x 11w) SPEC: Ø31.8 x Ø22.2
TRI-MINIBAR
TRI-MINBAR-MIR
<44-03>
P.A.T ING FOR MTB AND RACING SPEC: 44mm RISE UP FROM HANDLE POSITION
44
NE
<44-06>
P.A.T ING FOR MTB AND RACING WITH MIRROR FOR FRONT SPEC: 44mm RISE UP FROM HANDLE POSITION
H-BAR SYSTEM
NE
<45-01>
ARM REST AUTO POSITION MATERIAL: AL6061-T6
TRI-PA1
<45-02>
P.A.T ING MAJOR BAR ADJUSTABLE WITH TUB-S
<45-03>
<45-04>
TRI-PA1.75
<45-08>
TRI-PA1.75-S1
<45-09>
TRI-PA1.75-S2
<45-10>
P.A.T ING MAJOR BAR ADJUSTABLE 1.75 RISE UP FROM HANDLE POSITION WITH TUB-S2
<45-05>
MATERIAL: AL6061-T6 ANGLE: 17 DEGREE LENGTH: 180mm 3K CARBON COATING AVAILABLE
TUB-S2
FOR TRIATHLON BAR BRIDGE MATERIAL: AL6061 T6
P.A.T ING MAJOR BAR ADJUSTABLE 1.75 RISE UP FROM HANDLE POSITION WITH TUB-S1
P.A.T ING MAJOR BAR ADJUSTABLE WITH TUB-S2
TUB-S1
<45-07>
P.A.T ING MAJOR BAR ADJUSTABLE 1.75 RISE UP FROM HANDLE POSITION WITH TUB-S
P.A.T ING MAJOR BAR ADJUSTABLE WITH TUB-S1
TRI-PA1-S2
W
TRI-BR120
TRI-ORG-12A
TRI-PA1-S1
NE
W
<45-06>
MATERIAL: AL6061-T6 ANGLE: 17 DEGREE LENGTH: 300mm 3K CARBON COATING AVAILABLE
TUB-S
<45-11>
MATERIAL: AL6061-T6 LENGTH: 300mm 3K CARBON COATING AVAILABLE
TUB-J
<45-12>
MATERIAL: AL6061-T6 ANGLE: 50 DEGREE LENGTH: 300mm 3K CARBON COATING AVAILABLE
45
ACCESSORIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
STEM-LBCX
1270-F / 1270-F-A / 1270-F-B
<46-01>
TIG WELD STEM FOR CYCLO CROSS SPEC: 70~140mm ANGLE: 6° OR 10°
<46-07>
CABLE HANGER (BEND TUBE) W/I ADJUSTABLE SCREW COLD FORGED CNC MADE SPEC: Ø28.6 FRONT LONG-LEG: 34mm COLOR: BLACK, SILVER
1270-F-A 1270-F
ADP-SH1
ADP-SH2
<46-02>
1270-F-B
<46-08>
SHIMANO® C.L DISC HUB ADP STAINLESS STEEL WASHER WITH AL7075 NUT
SHIMANO® C.L DISC HUB ADP STAINLESS STEEL WASHER WITH AL7075 NUT
1270-CI
12-CX
<46-03>
CARBON SPACER WITH CANTI BRAKE HANGER REDUCE BRAKE NOISE
<46-09>
CANTI BRAKE HANGER FOR FORK COLOR: AS ORDER
REDUCE CANTI BRAKING NOISE
RG-AK1
RG-ARK
<46-04>
STEM SPACER RING BELL Ø28.6 STEM-OD
STEM SPACER RING BELL Ø28.6 STEM-OD
CHAIN PROTECTOR
CABLE PROTECTOR
<46-05>
CUSTOMER DESIGN AS ORDER MATERIAL: CARBON
MATERIAL: CARBON PC01 PC01A PC31
PC32
PC33
PC34
PC02
PC03
CNC-SPOKE 46
<46-10>
MATERIAL: AL7075-T651 SPEC: AS ORDER COLOR: AS ORDER
<46-06>
<46-11>
ACCESSORIES PUL-75W1
NE <47-01>
W
<47-07>
MATERIAL: AL7075-T651 CNC MADE TEETH: 11T BEARING OPTION: CR-STEEL SEAL BEARING CERIMIC SEAL BEARING CUSTOMIZED DESIGN CNC PARTS AVAILABLE
W/I WAVE SHAPE ADD CHAIN CONTACT AREA NOT FOR CHAIN CONNECTORS MATERIAL: AL7075-T651 CNC MADE TEETH: 11T BEARING OPTION: CR-STEEL SEAL BEARING CERIMIC SEAL BEARING CUSTOMIZED DESIGN CNC PARTS AVAILABLE
PUL-75C20 (PUL-75W4)
PUL-75C1
NE <47-02>
W
PUL-75C5
<47-08>
MATERIAL: AL7075-T651 CNC MADE TEETH: 11T BEARING OPTION: CR-STEEL SEAL BEARING CERIMIC SEAL BEARING CUSTOMIZED DESIGN CNC PARTS AVAILABLE
MATERIAL: AL7075-T651 CNC MADE TEETH: 11T BEARING OPTION: CR-STEEL SEAL BEARING CERIMIC SEAL BEARING CUSTOMIZED DESIGN CNC PARTS AVAILABLE
PUL-02
PUL-10
<47-03>
<47-09>
MATERIAL: AL6061 BEARING OPTION: W/I 607R CR-STEEL SEAL BEARING CERIMIC SEAL BEARING TEETH: 10T
MATERIAL: AL6061 CNC MADE BEARING OPTION: W/I 607R CR-STEEL SEAL BEARING CERIMIC SEAL BEARING TEETH: 10T
PUL-110
PUL-P11
<47-04>
MATERIAL: AL6061 CNC MADE BEARING OPTION: W/I 607R CR-STEEL SEAL BEARING CERIMIC SEAL BEARING TEETH: 11T
MATERIAL: PLASTIC TEETH: 11T
PUL-140
UTX-3
<47-05>
MATERIAL: AL6061 BEARING: W/I 607R CR-STEEL SEAL BEARING CERIMIC SEAL BEARING TEETH: 14T
UTX-9 MATERIAL: AL6061 T6
<47-10>
<47-11>
MATERIAL: AL6061-T6
<47-06>
UTX-2628
<47-12>
FOR 26” FRAME CHANGE TO 28” TIRE NOT AVAILABLE IN JAPAN MATERIAL: AL6061-T6 CNC MADE
47
ACCESSORIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
NE
W
CL-DTDR1
<48-01>
DOWN TUBE SHIFTER MOUNT SPEC: Ø31.8 (WITH Ø28.6 SHIM) FIT SHIMANO® 9 speed & 10 speed
CL-STEMDR1
CD-38
DOWN TUBE SHIFTER MOUNT TO HANDLE BAR SPEC: Ø26 WITH Ø24 & Ø22.2 SHIM FIT SHIMANO® 9 speed & 10 speed
1257A
1257B
<48-03>
BARREL FINISH FRONT CABLE HANGER SPEC: W/I ADJUSTABLE-SCREW STEERING TUBE Ø25.4, Ø28.6 COLOR: SILVER
ADP-103
CS-29A
<48-04>
DISC BRAKE ADAPTER
W/I ELECTRIC CS-29 ADAPTER CS-29L FOR TOW CABLE
CS-38 / CS-38B <48-05>
1244A / TRI-03 1244A
W
π 50
MATERIAL: AL6061-T6 COLOR: AS ORDER
NE
48
W
M5A10K
STAINLESS TUBE FOR V-BRAKE T90A
<48-07>
<48-08>
FOR WATER BOTTLE CAGE MATERIAL: AL7075 SPEC: AS ORDER
π 30
<48-12>
T90A / T90B / T110A <48-13>
π 30
END CAPS-A
<48-11>
MATERIAL: AL6061-T6
TRI-03
<48-06>
CHAIN RING BOLT MATERIAL: AL7075 W: 5mm OR 7mm
NE
<48-10>
FRONT CABLE HANGER SPEC: W/I TUBE Ø25.4, Ø28.6 COLOR: BLACK
MCK-10
W
<48-09>
DOWN TUBE SHIFTER MOUNT TO STEM TUBE SPEC: Ø28.6, Ø22.2 FIT SHIMANO® 9 speed & 10 speed
CABLE ADJUSTABLE MATERIAL: AL6061-T6
CS-38B
CL-HBDR1
<48-02>
T90B
T110A
NE
W
CABLE TIPS-A MATERIAL: AL6061-T6 COLOR: AS ORDER
M517 FOR WATER BOTTLE CAGE MATERIAL: AL7075 SPEC: AS ORDER
<48-14>
π 100
<48-15>
π 50
ACCESSORIES NE
Instructions
20
30
40
50
60
70
80
90 100 (m/m)
W
NZ-VF
<49-01>
L
NZ-HF
<49-09>
MATERIAL: AL6061-T6 SPEC: PRESTA VALVE LENGTH: 20 ~ 100mm
VITTORIA TIRE VALVE EXTENSION MATERIAL: AL 6061-T6 LENGTH: 30, 40, 50, 60, 70mm Tool
NE
W
L
NZ-DISC
<49-02>
L
NZ-F
MATERIAL: AL6061-T6 SPEC: DISC WHEEL 90 DEGREE ADAPTER (m/m) 100
NZ-UF
<49-03>
π 20
MATERIAL: COPPER OR AL6061-T6 SPEC: PRESTA CHANGE TO USA VALVE
ALLOY
NZ-B1 MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-B3 MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-01 MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-18 MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-KULO MATERIAL: NEON PLASTIC SPEC: USA VALVE
90
80
70
60
50
38
25
<49-10>
MATERIAL: AL6061-T6 SPEC: PRESTA VALVE LENGTH: 25mm, 38mm, 50mm ~ 100mm
NZ-RAC / NZ-RAC2
<49-11>
π 20
MATERIAL: AL6061-T6 CNC MADE SPEC: NZ-RAC USA VALVE NZ-RAC2 USA & PRESTA VALVE
COPPER
<49-04>
π 20
<49-05>
π 20
<49-06>
π 30
<49-07>
π 10
<49-08>
π 10
NZ-B2 MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-B4F MATERIAL: AL6061-T6 SPEC: PRESTA VALVE
NZ-08 MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-FT MATERIAL: AL6061-T6 SPEC: USA VALVE
NZ-KN MATERIAL: NEON PLASTIC SPEC: USA VALVE
<49-12>
π 20
<49-13>
π 30
<49-14>
π 10
<49-15>
π 10
<49-16>
π 10 49
ACCESSORIES
Hi Performance For Every One
Specifications Are Subject To Change Without Notice
π
NE ALL ITEM WITH THIS LOGO CAN BE PACKING INTO BOTTLE
NE
W
W
Bottle
π
<50-06>
Accessories Package
POLO HEAD RL-85V
RL-85EC
<50-01>
MATERIAL: AL6061-T6
ECCENTRIC WHEEL MATERIAL: AL6061-T6
1266A
1267A
<50-02>
CANTI BRAKE REAR HANGER
1269SA-2
<50-03>
SHIM-R051 / SHIM-R056
<50-04>
SPEC: R051 (Ø31.8 x Ø25.4) R056 (Ø31.8 x Ø26) H: 50mm OR AS ORDER
50
PIVOT NUT FOR FRONT FORK SPEC: M8 x 1.25
<50-08>
CS-21SP2
CS-21SP2 / CS-21SP2F <50-09> MATERIAL: STAINLESS WIRE
CYCLE CROSS SEAT TUBE FRONT DEARILLEUR CABLE ADAPTER
MATERIAL: NYLON 66 BODY AL6061-T6 TUBE SPEC: Ø62 x W150mm LENGTH: 1200mm WIDE: 150mm
CANTI BRAKE REAR HANGER
CS-21SP2
M083 (AP06)
<50-07>
<50-12>
SHIM-11 / SHIM-21
EXT-2C
<50-13>
SPEC: Ø28.6xØ25.4, Ø25.4xØ22.2
<50-10>
CUSTOMER REQUEST AVAILABLE SPEC: SM11 (Ø31.8 x Ø25.4) SM21 (Ø28.6 x Ø25.4) H: 50m
<50-05>
π 20
M103 (AP06) PIVOT NUT (MIO) FOR FRAME SPEC: M10 x 1.0 OPTION: M103E ( M10 x 1.25 )
<50-11>
π 20
NAME-P
<50-14>
WITH BOLT FOR EASY DRILL CARD HOLD
ACCESSORIES EACH COLOR WITH DIFFERENT SIZE 4mm
Balldriver
NE
5mm 6mm
TL-3X-65 / TL-3X-80 TL-3X-B65 / TL-3X-B80
<51-01>
MATERIAL: HEAT TREATMENT STEEL 6150 NYLON BODY LENGTH: 65mm, 80mm ALLENKEY TYPE: 4mm, 5mm, 6mm CUSTOMER WITH LOGO AVAILABLE
W
TL-9X
<51-05>
MATERIAL: HEAT TREATMENT STEEL 6150 AL6061-T6 BODY ALLENKEY TYPE: 2mm, 2.5mm, 3mm, 4mm 5mm, 6mm, CROSS WRENCH, STRAIGHT BLADE A SCREW, T25 STAR SHAPED
NE TL-3X
W
TL-3X-BALL
DBC-60 / DBC-90
WG-24F
<51-02>
MATERIAL: 80% CARBON FIBER BAR-END 3K WOVEN
M-BOT-A M-BOT-C
<51-06>
COLD FORGED SPEC: Ø31.8, Ø34.9 COLOR: AS ORDER
<51-03>
LAMP PEG & R.D PROTOCTER MATERIAL: M-BOT-A: AL6061-T6 M-BOT-C: CARBON M-BOT-A (ONLY FOR FRONT WHEEL)
M-BOT-C (FOR FRONT AND REAR WHEEL)
M-BOT-A
M-BOT-C
SUGGESTION:
S/SAFE
CL-KM2-S
<14-01>
<51-04>
MATERIAL: AL6061-T6 WITH C-RING FOR DIFFERENT SEATPOST SIZE WITH LONG SCREW
NUT TO LOCK
TITANIUM BOLT MATERIAL: ALL TI-64
TA003
TA004
TA005
TA008
TA011
TA013
TA016
TA019
51