CORSO DI LAUREA MAGISTRALE ARCHITETTURA CURRRICULUM ARCHITECTURAL DESIGN]
iCAD
International Course on Architectural Design MASTER PROGRAM
COURSE: ARCHITECTURE STRUCTURAL DESIGN LAB
CLASS: SYSTEMS AND COMPONENTS DESIGN
DIGITAL TECHNOLOGY FOR ARCHITECTURAL FABRICATION
FORM MANUFACTURING prof. Giuseppe Ridolfi, PhD
SYLLABUS & CLASS SCHEDULE
FALL 2014
Syllabus | Digital technologies for architectural design. Form manufacturing | prof. Giuseppe Ridolfi, PhD
iCAD International Course on Architectural Design – Master Program 2014-15 Architecture structural design lab [cod. D59] SYSTEMS AND COMPONENTS DESIGN prof. arch. Giuseppe Ridolfi Phd Email giusepperidolfi@gmail.com Phone: 3357066597
FALL 2014 / 6 CFU Class Location: room 06, S. Teresa, via della mattonaia 14 Class Hours: Fri 14:00-16:00 Office Location: room 27, Palazzo Vegni, via s.Niccolò 89/a Office Hours: Tu 10:30-12:30
Digital technology for architectural fabrication. Form manufacturing CLASS OUTLINE Class description. «Systems and components design» (first year) and «Environmental systems design» (second year) represent the disciplinary contribution of «Technology of architecture» to the two integrated laboratories «Architecture structural design lab» (1st year) and «Building and environmental design lab» (2nd year). The aim of these two classes is to explore new technologies and related opportunities derived from digital computation and industrial automatic production in conceiving, designing and producing architecture. In this semester, the «Systems and components design» class begins with a preliminary introduction to industrial design in architecture and an overview about processes involving generation and management of digital information to support decision-making in constructions known as Building Information Modeling (Revit/Autodesk, 2003), Building Design Advisor (Lawrence Berkeley National Lab, 1993), Building Information Model (G.A. van Nederveen, F.P. Tolman, 1992), Integrated Project Models (Microstation/Bentley Systems, 1984) Virtual Building (Archicad, Gábor Bojár, 1982) and Building Description System (Charles Eastman, 1974). The class then covers a preliminary understanding about the workflow between computational design, building modeling and computer programmable devices for architectural constructions. More in detail, the class of the first year covers methodologies and skills about the use of software and automatic manufacturing technologies for the production/control of structures, components and elements of buildings. The topic is «Form manufacturing» in which students are asked to study forms and model materials to feed automatic manufacturing in order to fabricate a «Structural and/or Envelope System Prototype» to apply in the «Architectural Design» class and to verify in the «Structural Design» class. For these reasons, the class of this semester is not approaching the building shaping as a mere invention of free-form and software is not intended and used as a tools for rendering, but as a coherent and interoperative process to address the real manufacture of buildings: a new modus operandi for architectural designers. Emphasis is upon the use of 3D Computer Aided Design (CAD), and Computer Aided Manufacturing (CAM) related to the technologies of laser cutting. According to the characteristics of this technology, the class promotes the study of structural plane plates and their generation/assembly criteria. Students’ proposals involving different manufacturing systems such as CNC Contouring, CNC Additing, etc. are strongly discouraged although some small parts of the whole system could be fabricated using such a kind of techs. iCAD International Course on Architectural Design | Architecture and structure design lab | Systems and components design | FALL 2014 / 6 CFU | pg.2
Syllabus | Digital technologies for architectural design. Form manufacturing | prof. Giuseppe Ridolfi, PhD
The class is organized in different stages: • introduction: from the industrial production as a «zero tolerance» manufacturing to Building Information Modeling; • shape investigation: intuitive shape research and optimization processes through the observation of natural morphogenesis, architectural case-study analysis and experiments based on transformational methods entailing manipulation of surfaces or objects through procedures such as cutting/stretching, morphing/warping, folding/unfolding, origami/kirigami, waffling techniques and patterning strategies; • digital shaping and project proposal developing: use of 3d modeling software and other digital tools and plugins for paneling, tessellation and surfaces developing to integrate the previous shape investigation and to support the automatic fabrication of the projects in relationship with the «Architectural Design» class; • numerical controlled production: study of CAM with specific insights on laser cutting technology and its application in architectural constructions; • production preparation: data preparation for production addressing specific attention to tolerance, scale and material characteristics. • production: elements manufacturing and assembling to realize a scaled «Structural and/or Envelope System Prototype» as the Final Project Proposal. Methodology and activity specifications. The class is a fab-lab conceived as an hybrid computer based hands off/hands on activity, supported by the Department’s laser cutter Architectural Models Laboratory (LMA), reinforced by theoretical dissertations and intermediate/final Students’ Presentation. Theoretical activities are carried out through teacher’s slide presentations integrated by guest lectures on parametric/generative modeling and CAD/CAM data translation; selected readings on digital architecture, new construction technologies and advanced materials; desk-crits; pin-up discussions; poster presentations; individual and collective reviews. Practical activities are developed through home and in-class assignments concerning case-study analysis on meaningful examples of architectures involving use of digital design and computer manufacturing technologies; natural morphogenesis observations; physical/digital shape manipulations and generations; model making and final manufacturing concerning files preparation to support laser cutting processes and assembling the resulting elements and parts. Teaching methods include knowledge database online sharing (via Dropbox, Issuu and mainly Mindmup) produced by the concurrent cooperation of teacher and students; managing a personal scrapbook (Taccuino) to gather ideas, suggestions, copies of sketches, assumptions and verifications carried out during the design process. The Taccuino it’s also to collect the documentation of the fabrication phase and to show the learning process of each student. Class goals. Upon completion the class, the student is expected to acquire: • awareness about the nature, efficiency and constraints of automated production systems; • capacity to understand contemporary digital architecture; • knowledge and skills to conceive and manage construction operational workflows and architectural artifacts under the digital technologies of industrial manufacturing; • geometrical knowledge and skills to operate in form generation and modeling software; • confidence with spatial aggregations at different scales of plane elements in order to realize structural systems and architectural envelopes; • abilities to manage the designing process combining architectural design, structural engineering, construction technologies, materials and computer fabrication techniques; • basic understanding of the computer-numerically assisted fabrication process and, more specifically, laser cutter machines and software to feed them; • capacity to produce physical models and to test precision and feasibility of architectural ideas; iCAD International Course on Architectural Design | Architecture and structure design lab | Systems and components design | FALL 2013 / 6 CFU | pg.3
Syllabus | Digital technologies for architectural design. Form manufacturing | prof. Giuseppe Ridolfi, PhD
• awareness on advanced technologies and new materials suitable for digital architecture; • abilities to conceive communication strategies and to realize effective public presentations through consistent digital instruments. Assignments and Grade. Student work evaluation is based on the following assignments, relative credits and weights: credit 1
assignment- Vol. 1 | Diagrams and RealiIndividual Taccuino «On form investigation» zations > A4 Brochure to submit via Dropbox & Poster Presentation
weight 10%
2
Schematic Proposal > Poster presentation and validation
10%
3
Individual Taccuino «On form investigation» - Vol. 2 | Assembly & Joining Technology >A4 Brochure to submit via Dropbox & Poster Presentation
15%
4
Individual Paper on «Digital Technology and Architectural Fabrication»
15%
5
Final Proposal > Poster and Model presentation for Approval
15%
6
Final Exam > Final Presentation
35%
The Final Exam (credit #06) is focused on the assessment of the Final Project Proposal concerning a «Structural and/or Envelope System Prototype» to be applied in whole or in parts of the architectural building developed in the Design Class and to be schematically verified in the Structure Class. The Student has to communicate succinctly her/his results through the Final Presentation showing: • concept, compositing diagrams and project references as an excerpt of the Taccuino researches • renderings of the proposal in relationship with the architectural building developed in Design Class • general and detailed drawings • graphic and schematic report of the structural verification • numerical controlled model prototype • documentation of the conceiving and manufacturing process Materials to submit for the Final Exam are: • Taccuino «On form investigation» - Vol. 1 | Diagrams and Realizations (format: UNI DIN A4 / horizontal)
• Taccuino «On form investigation» - Vol. 2 | Research on «Assembly and Joining Technology» (format: UNI DIN A4 / horizontal) • Final Project Proposal (1 poster format: UNI DIN A1 / vertical) • Scaled Prototype of the Final Project Proposal with photo/video documentation • Slide presentation • CD/DVD collecting all the files produced by the student Grades are expressed in thirty taking in consideration originality, creativity, refinement, dedication, attention, completeness, correctness: • 30L- 29 exceptional evaluation, awarded to students whose work is outstanding • 28-27 distinguished evaluation, awarded to students whose work is good • 26-24 average evaluation, awarded to students whose work is adequate iCAD International Course on Architectural Design | Architecture and structure design lab | Systems and components design | FALL 2014 / 6 CFU | pg.4
Syllabus | Digital technologies for architectural design. Form manufacturing | prof. Giuseppe Ridolfi, PhD
• 23-18 low evaluation, awarded to students whose work is sufficient but not completely satisfactory in all the aspects • <18 insufficient, awarded to students whose work failed in several aspects • NC «not classified», awarded to students whose work is missing or presents severe lacks. Attendance. This is an occupational class, and attendance is important. Class policy establishes that if the student is not attending compulsory classes (see the Class schedule) or has collects more than three absences in normal class fails the exam. In any case, the professor is not responsible for students who are not receiving information due to their truancy although most of the information is accessible on line. Academic integrity and honesty. The class is against plagiarism and dishonesty. Cheating, appropriation of materials from other authors without crediting them and re-using researches or projects done in previous course without appropriate authorization is a violation of the University’s code of academic integrity. Penalties for such violations can result in loss of credits, to fail the course and, in severe cases, to incur legal actions. Students are invited to place clearly source references and credits in appropriate way using standard conventions. Class requirements. The student attending the class is required to have her/his laptop with preinstalled 3D CAD software, raster/vector graphic programs and any other digital tools for visual communication and public presentations. Plugins and other specific software useful to support the activities of the class will be available for free downloading during the semester. Although the class is an introductory teaching on BIM and 3D CAD/CAM, each student is expected to have confidence in CAD with a basic understanding of solid modeling and to be skilled in graphic design for final and intermediate presentations. Because the class is not providing any teaching about the use of CAD and graphic software and considering that the class proceeds from scratch to advanced modeling techniques and to the parametric/generative design of the second year, the student is strongly recommended to enter the short course provided by the «Laboratorio Informatico del Dipartimento di Architettura (LIA)» in order to reinforce their skills and abilities. Date of submission and topic of the short courses will be given during the class. In addition, the student is required to have completed studies on traditional materials and technologies for architectural constructions. Bibliography and Resources. Bibliography, reading materials, lectures integrations, tutorials to assist assignments and other resources including the Syllabus, the Class Schedule are available online at the Course Map. The student is required to access regularly the Course Map to check news and resources update. Major topics and Tags. Architectural industrial design, digital design, automated fabrication, BIM, CAD/CAM, digital modeling, folding, interoperability, kirigami, laser cutting, morphogenesis, origami, structural plane plates, tessellation, waffling, zero defects manufacturing.
iCAD International Course on Architectural Design | Architecture and structure design lab | Systems and components design | FALL 2013 / 6 CFU | pg.5
Syllabus | Digital technologies for architectural design. Form manufacturing | prof. Giuseppe Ridolfi, PhD
Digital technologies for architectural fabrication. Form manufacturing CLASS SCHEDULE The program of the course is articulated as follows: 25. september > Class presentation > Home Assignments: Students are asked to read: 2013 | G. Ridolfi, Digital Technology for Architectural Fabrication From the reading students have to be prepared for the next class discussion scheduled on Friday the 26th 26. september > compulsory attendance • Class discussion and Lecture on «Digital Technology for Architectural Fabrication» • Taccuino Guide • Students’ Registration, Class Scheduling presentation > Home Assignments: Students are asked: • to start the research for Credit #04– Paper «Digital Technology for Architectural Fabrication» from the following readings: 2003 | Greg Lynn , Architectural Curvilinearity. 2010 | Ankit Surti, Digital Architecture Essay. Undated | Branko Kolarevic, Digital Morphogenesis and Computational Architectures • to develop research «Empirical form investigation» as the beginning of Credit#01 For references and explanatory examples look at the «Assignment & Credits Info Nodes» and «Form Manufacturing Resources» in the Course Map. 3.october > compulsory attendance • Studio activities on «Empirical form investigation» • Lecture on «Structural Morphogenesis and Digital Fabrication Technique» • Students Registration 10.october • Studio activities on «Empirical form investigation» • Desk critiques and individual review 17.october • Studio activities on «Empirical form investigation» • Desk critiques and individual review • Paper Topic Submission for Approval in order to develop it [Credit#04] 22.october > compulsory (Deadline 24:00 h) • Taccuino vol I submission uploading a .pdf fiile on the Dropbox Students’ Space 24. october > compulsory attendance • Poster presentation and discussion «On form investigation» - Vol. 1 | Diagrams and Realizations [Credit#01] 31 october > compulsory Structural attendance • Lecture on «Behaviors, Performances and Diagrams in architectural constructions. A parametric approach for Building Compositing and Construction Management» • Last call Paper Submission for Approval in order to develop it [Credit#04] 07 november • Studio activities and Desk critiques 12.november > compulsory (Deadline 24:00 h) • Schematic Proposal submission uploading a .pdf fiile on the Dropbox Students’ Space 14. november > compulsory attendance • Poster presentation to the Teacher Board «Schematic Proposal» [Credit#02] 21. november > compulsory attendance • Lecture on «Composite materials & Assembling» iCAD International Course on Architectural Design | Architecture and structure design lab | Systems and components design | FALL 2014 / 6 CFU | pg.6
Syllabus | Digital technologies for architectural design. Form manufacturing | prof. Giuseppe Ridolfi, PhD
28. november • Studio activities and Desk critiques 05 dicember • Studio activities and Desk critiques 10.dicember > compulsory (Deadline 24:00 h) • Taccuino vol I submission uploading a .pdf fiile on the Dropbox Students’ Space 12. december > compulsory attendance • Poster presentation and discussion «On form investigation» - Vol. 2 | Assembly & Joining Technology [Credit#03] 17.dicember > compulsory (Deadline 24:00 h) Paper «Digital Technology & Joining Technology» submission uploading a .pdf fiile at the Dropbox Students’ Space 9 january > compulsory attendance • Guest’s Lecture on «Production data preparation» + visit to the Architectural Models Laboratory (LMA) • Studio activities and Desk critiques 14 january > compulsory (Deadline 24:00 h) • Taccuino vol I submission uploading a .pdf fiile on the Dropbox Students’ Space 16 january > compulsory attendance • Poster presentation and discussion «Final Proposal for Approval» [Credit#05] 23 january • On demand review on «Production and assembly» 28 january > compulsory for first call final exam (Deadline 24:00 h) • Final Exam material submission uploading on the Dropbox Students’ Space 30. january > Final exam – First Call • «Final Project Proposal» Presentation Board [credit#06] (reserved for students who intend to take the exam in the First Call) • On demand review on «Production and assembly» 06 february • On demand review on «Production and assembly» 23. january > Final exam – Last Call (9:00-11:00) «Final Project Proposal» Presentation Board [credit#06] (reserved for students who intend to take the exam in the First Call) (11:00-18:00) «Final Project Proposal» Interdisciplinary slide presentation [credit#05] 17 january > compulsory for second call final exam (Deadline 24:00 h) • Final Exam material submission uploading on the Dropbox Students’ Space 19. january > Final exam – Last Call • «Final Project Proposal» Presentation [credit#06] 20. january > Final exam – Last Call • Grade Registration
iCAD International Course on Architectural Design | Architecture and structure design lab | Systems and components design | FALL 2013 / 6 CFU | pg.7
Systems and Components Design Class Timetable
Taccuino II «Assembly & Joining Technology» Credit # 03 Paper «Digital Technology for Architectural Fabrication» Credit # 04
Academic Year
FALL
Digital Technology for Architectural Fabrication
2014
Structural Morphogenesis and Digital Fabrication Guest’s Lecture _Production data preparation + visit to the Architectural Models Laboratory (LMA) Final Proposal for Approval Credit # 05 Taccuino I «On Form Investigation» Credit # 01 Behaviors, Performances and Diagrams in architectural constructions. A parametric approach for Building Compositing and Construction Management
Final Exam – First Call Credit # 06
Schematic Proposal Credit # 02 Final Exam – Second Call Credit # 06
Composite Materials & Assembling
Lecture
Students’ File Submission
Students’ Poster Presentation
Students’ Final Presentation