Tools and equipment to enhance shop efficiency

Next Article

Business

TO ENHANCE SHOP EFFICIENCY

Industries Power Lifter is rated at 187 lbs. Instead of breaking your back, a battery powered power lifter from Martins Industries is just the ticket. The roll-around unit is powered by two 12-volt rechargeable batteries and includes an impact wrench holder and hardware tray for wheel fasteners. It is designed for use with maximum tire width of 11 inches.

An automatic three-speed acceleration lift raises the wheel/tire combo in less than 13 seconds. A single battery charge can handle up to 500 wheel/tire assemblies. A safety strap prevents the wheel/tire from accidentally falling from the lift. Four swivel caster wheels provide easy maneuvering, especially handy when aligning the wheel to the hub centerline during installation.

Impact Boom No, we’re not talking about the sound of a noisy air wrench. When using a monster-sized impact wrench during heavy-duty truck wheel service, slinging around a heavy and unwieldy impact wrench can really put a strain on even the most robust technician.

Martins Industries’ Impact Boom is a rollaround boom crane that supports the weight of

COURTESY OF MAYHEW

the tool, allowing you to easily locate the impact at the correct height for your situation, supporting the weight of the tool while you service the wheel fasteners. Load capacity is 50 lbs.

The Mobile Impact Wrench Support Stand is equipped with a steel bracket and a strong gas

The Power Lifter eliminates manual lifting of tire/wheel assemblies during removal or installation.

In addition to working at vehicle lift height, Martins Industries’ Impact Boom supports the tool weight at low working height and eliminates back and knee strain.

cylinder. An included tray allows securing the impact gun and provides storage for wheel nuts, hub covers and more.

Multi-function scanners As we all know, diagnostic scanner tools have really come of age, featuring much more than the ability to merely detect trouble codes. Three examples are listed here, including models from Autel and Bosch.

COURTESY OF MARTINS INDUSTRIES

Autel

Autel offers several state-of-the-art scanner tools in their MaxSYS series. As but one example, the MaxiCHECK MX808 features AutoVIN 2006+, the ability to auto-scan all modules in all systems, 17 service functions and allows generating printable diagnostic reports. The tool covers domestic, Asian and European vehicle manufacturers (1996+) . One year of free updates are included.

Additional features include a 7-inch touchscreen, 1.5GHz Quad-Core processor, 32GB memory, 2GB RAM, Android 4.4.4 /WiFi soft ware updates, I/M readiness/emissions testing, the ability to reset diesel emissions on select light- and medium-duty vehicles, DPF regen36

Martins’ Impact Boom allows you to position the impact wrench at the desired height.

eration, setting inspection 1&2 service intervals, and is designed to support OBD II protocols and all 10 test modes, enhanced Mode 6 diagnostics, viewing live and freeze frame data, relearning

COURTESY OF AUTEL

Autel’s MX808 can auto-scan all modules.

COURTESY OF AUTEL

Bosch’s ADS 625 has the Repair-Source database.

Autel’s MS908SP has 21 service functions.

TPMS Sensor ID (activation tool required), and allows graphing, recording and playback of live data.

Included are MaxiSYS System Suite applications for the shop manager, software and one-year warranty, eligibility for extended TCP coverage, an OBD II cord, 5,000 mAh Lithiumpolymer battery and an 8 MP camera with LED light. The unit also allows file saving with a Micro SD Card (32G maximum, not included).

The MaxiSYS MS908SP, Autel’s “Powerful Complete Diagnostic System,” features AutoVIN 2006+ and AutoSCAN for all modules in all systems, 21 service functions, bidirectional control to perform active tests, J2534 MaxiFlash Elite Pass-Thru Programming Device, a massive 10-inch touchscreen, 1.3GHz+1.7GHz processor/64GB memory and 2GB RAM, one year free software and one year warranty (eligible for extended TCP coverage), Android 4.4.2/ WiFi software updates/eligible for ADAS soft ware upgrade, advanced coding and adaptations, key programming for domestic and Asian 2001+ and the ability to reset diesel emissions on select light- and medium-duty vehicles and DPF regeneration.

The CarMD Pro Scan plugs into the DLC. With a smart device communicating via Bluetooth, full module scanning and more is available.

The unit covers domestic, Asian and European vehicle manufacturers (1996+) including supercars. MS908SP also generates printable diagnostic reports and handles enhanced Mode 6 Diagnostics (all 10 test modes). The tool allows you to access all repair records and to view live and freeze frame data, and to relearn TPMS sensor ID (activation tool required). Like the MX808, the MS908SP also includes the MaxiSYS suite application for shop managers, and the ability to save files to a Micro SD card. The tool also features an 8MP camera with LED light and an 11,000 mAh Lithium-polymer battery. It also includes an OBD II connector kit and carry case.

Bosch ADS 625

The Bosch ADS 625 automotive diagnostic scan tool offers everything technicians need to diagnose, research and repair vehicles in one solution

including Bosch’s new Repair-Source database. Repair-Source includes OE service and repair information on the diagnostic tool, instead of a separate computer, included with the annual diagnostics subscription. The exclusive database also gives technicians wiring diagrams, component locations, DTC troubleshooting work flows, repair procedures, maintenance schedules, TSBs, labor times and more.

Bosch’s new diagnostic tool performs system scans, displays data streams, special tests, bidirectional controls and displays repair information, data streams and more. The tool is designed and tested by technicians, with technicians in mind, to diagnose the most complex vehicle issues for passenger cars and trucks.

The ADS 625 can quickly Auto ID CAN vehicles, read/clear all DTC types from controllers, view data PIDS, perform bidirectional controls, calibrations, resets and relearns. The easy-to-use software and diagnostic workflow allow for fast navigation and diagnosis for optimal efficiency.

CarMD remote scan

As technology continues to advance, we now have the option of performing vehicle computer module scans without a dedicated scanner. Using a plug-in to the DLC and an app via a smart phone, laptop or tablet, data can be retrieved along with a variety of diagnostic functions. An example is the CarMD Pro Scan which allows you to use the company’s app in conjunction with the plug-in hardware device in order to scan the vehicle, obtaining all data from their remote location directly to your smart phone, laptop or tablet. The system quickly performs a full network scan including all of the modules featured

Cordless electric tools are ideal for working in tight spaces or when dragging an air hose isn’t preferred.

Clore’s new PL6100 is ideal for both charging and maintaining battery voltage during programming.

COURTESY OF BOSCH

in a specific vehicle. The CarMD mobile app syncs to transfer data that can be transferred to any location. Obtaining the application requires using a smart phone, laptop or tablet to go to the app store and obtain the CarMD ProScan app.

In basic terms, you plug the CarMD Pro Scan device into the vehicle’s DLC, and use your Bluetooth-enabled device (smart phone, tablet, etc.) to both view and manage data retrieval and diagnostics. A smart phone (or other device) allows Pro Scan to communicate with CarMD’s data base.

Currently, the system is applicable to model years 1996 through 2017. As compatibility with 2018 and newer models becomes available, Pro Scan can be easily updated.

Once an account has been set up, log in to the site using your registered email address and password, and gain full access to menus that provide freeze frame data, relevant TSBs, and more.

The CarMD Pro Scan transfers data to the Car MD repair shop portal, delivering real-time data including freeze frame data, inspection/mainte42

Bosch BAT 120 wireless battery and starter/ charger system tester provides diagnostic “health reports.”

nance monitor status, maintenance service intervals, vehicle mileage, network scan of OBD II codes, pending DTCs, possible causes, upcoming maintenance and predicted diagnostics

Also included are unique marketing prospects with the use of predicted diagnosis and customizable coupons, allowing you to connect directly to your customers regarding upcoming promotions, updates on current repair jobs, etc.

Battery testers/chargers

Bosch BAT wireless

The Bosch BAT 120 Wireless Battery and Starter/ Charger System Tester allows technicians to perform faster battery system tests and receive full alternator health reports. The tester is designed to wirelessly transmit data via Bluetooth connectivity to a pre-installed app on the Bosch ADS 325 and ADS 625 diagnostic tools, saving time and putting more vehicle diagnostic information on the scan tool.

The BAT 120 works on 6- and 12-volt automotive batteries, including regular flooded, en-

OTC’s digital torque wrench has a 1/4-inch drive.

COURTESY OF OTC

hanced flooded, absorbent glass mat (AGM), EV and start-stop, as well as batteries with as little as 1.5 volts. It also conducts 12- and 24-volt charger/ starter systems tests and tests a vehicle’s battery charging system to gauge alternator health and troubleshoot charging issues.

Clore Pro-Logix

We all know that whenever a module requires reprogramming that the vehicle battery needs to be held at specified levels. Clore Automotive’s new Pro-Logix PL6100 is a new 12-volt 100A flashing power supply and 60/40/10A battery charger from Solar. The PL6100 is designed to provide stable power, on demand up to 100A, to a vehicle’s electrical system to support reprogramming in addition to providing full service battery charging capabilities from 10 to 60 amp.

In power supply mode, the Pro=Logix PL6100 provides power to maintain voltage at a preset level, increasing output in response to system load increases to maintain a stable environment for reprogramming. It features a voltage output range of 13.1 – 14.9 volts, adjustable in 0.1V increments. This allows the operator to dial in the output exactly s specified by the vehicle manufacturer during service. It also delivers massive power with minimal voltage ripple, providing a clean flow of power without risk of programming interference.

In charging mode, the PL6100 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routing to a wide variety of lead acid type batteries including conventional, AGM, spiral wound, startstop, deep cycle and marine batteries.

The Robinair R-ID Plus Refrigerant Analyzer includes an internal printer.

Compact bolt cutter Knipex Tools has introduced its CoBolt S compact bolt cutter in a new, 6 1/4-inch length. Despite its smaller size, the CoBolt S provides extremely high cutting power, easily cutting bolts, nails and rivets up to 11/64-inch in diameter. In addition to its compact design, the cutter has a slim head designed for better access to confined areas. The CoBolt S has a strong lever action mechanism that allows the user to exert less effort when using the cutter. Below the joint is a gripping surface for pulling wires with a diameter from 3/64-inch.

Other features include laser-cut edges on the blades, which prevent material being cut from

COURTESY OF OTC

OTC’s Universal Cooling System Pressure Tester Kit is fast and efficient.

slipping. Forged and multi-staged oil-hardened from German, chrome vanadium heavy-duty steel, the CoBolt S has induction-hardened cutting edges with a hardness of approximately 64 HRC for cutting thin hard wire, screws and springs.

“The CoBolt S has all the power and exceptional cutting that make the CoBolt series popular, but in a compact size that easily fits in your pocket,” said Peter Grable, product manager, Knipex Tools. “Perfect for small hands or for working in hard-to-reach areas, this cutter offers exceptional power with less required hand force than other cutters of its size.”

Cordless popularity Cordless electric power tools have come of age, with improved battery performance (re: torque) and vastly superior battery life.

Common applications include impact guns, ratchets, cut-off tools, drivers for socket wrenches and screw bits. Major benefits include elimination of dragging compressed air hoses around the shop, and less demand on your air compressor, allowing the compressor to concentrate on your needs for tire changers, tire inflation, blowgun use, and more.

High power, longer life lithium battery technology has improved enormously over recent years, with cordless power tools ranging from 12 to 20 volts, in drives from 1/2-inch to 1/4-inch.

Robinair’s R-ID analyzer works on vehicles equipped with R-134a or R1234yf refrigerant.

Applications include impact wrenches, power drivers, cut-off wheels and more.

For applications where you’d prefer not to drag around air hoses, or if you simply don’t have ready access to air, or when faced with cramped access in engine bays or under dash, today’s cordless power tools are a viable alternative to pneumatic tools. While pneumatic tools are essential for any shop, adding a selection of cordless tools can improve shop efficiency.

Cooling system tester The OTC Universal Cooling System Pressure Test Kit (#6977) is designed to eliminate the search for the right coolant cap adapter and provide technicians with a faster, more efficient approach to pressure testing cooling systems. The tester features four adapters (1/4-, 5/16-, 1/2- and 5/8-inch) with Schrader valves to prevent coolant spray when disconnecting, while the hand pump includes an easy to read integrated pressure gauge and padded base to prevent vehicle surface scratches.

The kit also comes with a dedicated 36-inch pressure hose with a quick-connect coupler mated to the adapters and a radiator cap adapter for older vehicles. Stored in a convenient blow molded case, the OTC Cooling System Pressure Test

Kit covers virtually any make and model vehicle and is covered by a lifetime warranty.

Digital torque wrench Beam type and micrometer type torque wrenches continue to suit the needs of tightening thread fasteners to a specified torque value, but digital torque wrenches can offer more in terms of both accuracy, ease of use and providing added information.

While digital torque wrenches are available in drives of 1/4-, 3/8- and 1/2-inch, as an example, the OTC Digital Torque Wrench (#7380E150) is designed to show torque in real time and at the point of release through the tool’s digital display.

The 1/4-inch drive wrench features a smooth operating 36-tooth ratchet head with measured torque ranging from 1.5 ft.-lbs. to 150 ft.-lbs., while sensitive enough to measure bearing preload torque values. Clockwise or counterclockwise, the wrench is accurate to within +/- 1% from 10% to 100% of full scale.

The five-digit alphanumeric LCD clearly displays torque and measurement settings and is controlled by four buttons. The 7380-E150 also features green, yellow and red LED light indicators, an audible buzzer and vibration to help technicians avoid over-torquing.

Refrigerant analyzer The Robinair R-ID Refrigerant Analyzer (#16990) and R-ID Plus Refrigerant Analyzer (#16995) are designed to meet the service needs of technicians working on vehicles equipped with either R-134a or the newer R-1234yf refrigerant. The hand-held devices analyze refrigerant in a vehicle’s A/C system to quickly and accurately determine purity, which is a requirement of R1234yf service. Both tools feature a large color display and USB port to easily connect to any SAE J2843 or J3030 A/C service machine not equipped with a refrigerant analyzer.

The analyzers are designed to display the amount of R-1234yf, R-134a, R-12, R-22 and hydrocarbons, as well as percent air in pure R1234yf and R-134a, allowing the technician to determine their next step.

The Robinair R-ID Refrigerant Analyzer Plus includes all of the features of the 16990 but also comes with an internal printer to print final test results. ■

WORK SMARTER NOT HARDER

MS908S

MS908SP DIAGNOSTIC INTELLIGENCE

64G Memory

POWERFUL HARDWARE / SMARTER SOFTWARE

Phone: (855) 288-3587 USSUPPORT@AUTEL.COM AUTEL.COM • MAXITPMS.COM • MAXISYSADAS.COM ©2019 Autel Intelligent Technology Corp., Ltd. All Rights Reserved

MINI COOPER corrosion at the gearshift mechaMANUAL MINI SHIFT FIX nism (shift cables or transmission This bulletin applies to R57, gearshift unit). Inspect the shifting R58, R59, R60 and R61 Coo- gear mechanism deflection lever per models equipped with for a missing or damaged circlip. a manual transmission. The Install or replace as needed, uscustomer may comment about a ing new parts P/N 23 11 7 593 200 stiff diagonal gearshift lever movement (N-R, R-N, 2-3, 3-2, 4-5 or Inspect the circlip (1) and plastic sliding (circlip) and P/N 23 11 7 593 217 (sliding sleeve). 5-4). Also, in some cases, gears can- sleeve (2) for damage. If the cables move freely afnot be selected, or the selector gear ter disconnection and the level does not go into the neutral position. The deflec- circlip and/or sliding sleeve are not found to be tion lever circlip of the gearshift mechanism may defective, then replace the transmission gearshift be damaged or is missing. Also, there is possible switching unit.

INFORMATION COURTESY OF MITCHELL 1

FORD STEERING COLUMN CAN’T REMEMBER

Some 2011-2013 Ford F-150 trucks equipped with the Easy Entry/Exit feature may exhibit the power telescoping/tilt steering column not returning to the correct position (customer set point) when the feature is enabled.

Reprogram the steering column control module (SCCM) to the latest calibration using IDS release 82.01 and higher. This new calibration is not included in the VCM 2012.11 DVD. Calibration files may be obtained at www.motorcraft.com.

INFORMATION COURTESY OF WWW.MOTOLOGIC.COM

JEEP JEEP CRANK/NO START Owners of a 2014-2016 Jeep Compass or Patriot built on or before March 9, 2016, may experience a crank/no-start or MIL on. The technician may find DTC B1A25 (invalid key) or B1A29 (SKIM base station mismatch). This bulletin involves updating the wireless control module (WCM) with new software.

Install a battery charger to keep battery voltage between 13.2 and 13.5 volts. 1. Will the engine crank and start? If yes, proceed to Step 5. If it won’t start, proceed to Step 2. 2. Turn off the ignition and pull the ignition Off Draw (IOD) fuse. 3. Install the IOD fuse and try to start the engine again. 4. Will the engine crank and start? If yes, proceed to Step 6. If not, normal diagnostics need to be performed and repair as necessary. 5. Reprogram the WCM with the latest soft ware release. 6. After WCM reprogramming, clear all DTCs.

INFORMATION COURTESY OF WWW.MOTOLOGIC.COM

DODGE CONFUSED MODULE

A “small number” of 2013 Dodge Ram 1500 trucks equipped with a 3.6L engine and built on or before June 7, 2013, may experience a MIL on, with DTC P0607 (ECU internal performance) set.

Using a scan tool, verify that all engine systems are functioning as designed. Record and repair as needed before proceeding. Install a battery charger to keep battery voltage between 13.2 and 13.5 volts. Reprogram the PCM with wiTECH software level 14.01 or higher. Clear any DTCs that may have set during programming. Type the necessary information on an authorized modifications label and attach it near the VECI label.

INFORMATION COURTESY OF WWW.MOTOLOGIC.COM

MITSUBISHI MITSUBISHI FORWARD COLLISION AVOIDANCE RECALL

Mitsubishi has released a recall for a limited number of 2016 to 2018 Outlander and 2018 and 2019 Eclipse models, built from August 2016 to June 2018. The recall involves vehicles equipped with a forward collision mitigation (FCM) system that detects pedestrians.

Due to incorrect software, the FCM-ECU collision avoidance unit may apply braking for longer than needed, even after a pedestrian is no longer detected.

If the FCMECU software activates the brakes for longer than necessary, the driver may react by applying additional braking.

The resulting rapid deceleration of the vehicle from the additional braking can increase the risk of a rear-end collision.

INFORMATION COURTESY OF MITCHELL 1

DUAL FORD FUEL FILTER SOCKET

• DOUBLE SIDED SOCKET INCLUDES 24MM 6PT SOCKET AND 36MM SLOTTED SOCKET • FOR USE ON VARIOUS FUEL FILTER AND

OIL FILTER CARTRIDGE STYLE FILTERS • USE WITH 3/8" SQUARE DRIVE RATCHET

AND EXTENSION • BLUE ANODIZING MAKES SOCKET EASILY

VISIBLE EVEN IN DARK AREAS

MADE IN USA

SKU: 524

WWW.LANGTOOLS.COM

GMC MIGHT BE THE WATER PUMP

This bulletin applies to 2017-2019 GMC Canyon trucks equipped with a 3.6L engine. Some customers may comment that the SES lamp is on or the engine may have a slight noise coming from the front of the engine belt area. Upon investigation, you may find DTC P0324 set in the ECM. GM has determined that at times the code can be set by noise from the water pump.

Listen to the water pump with a stethoscope or chassis ears to see if any unusual noise is heard. Watch the knock retard to bank on GDS2, then remove the belt and observe knock retard again. If there is a difference, replace the water pump and re-evaluate the concern.

INFORMATION COURTESY OF MITCHELL 1

INFINITI INFINITI TELEMATICS ISSUE This bulletin applies to 2017-2018 Infiniti QX30. Diagnostic information in the electronic service manuals (ESM) for the following DTCs may be missing or incorrect:

• B2EF0 (internal battery...circ volt below threshold) • B130C (TCU....Telematics Control Unit....pairing error).

If one of these DTCs is stored, follow the steps below along with the ESM to complete the required repairs.

DTC B2FE0:

• Start the engine and let it idle for 30 minutes to allow charging od the TCU internal battery. • Verify that the DTC can be erased. • If the DTC will not erase, replace the TCU.

DTC B130C:

• Collect all keys and re-register them to the vehicle. • Verify that the DTC can be erased. • If the DTC will not erase, replace the TCU.

INFORMATION COURTESY OF MITCHELL 1

CLEAN POWER FOR OPTIMAL REPROGRAMMING

The PL6100 from SOLAR provides an ideal stable power supply mode to maintain vehicle system voltage during reflashing events:

• Continuous power up to 100A (no time limit) • Selectable target voltage from 13.1-14.9V • Minimal voltage ripple (<100mV) • Rapid Load Response Technology • Extra-long 13’ cable reach • Includes charging capability (60/40/10A) • Requires 20A outlet

Charge mode compatible with a wide variety of battery types:

TOYOTA TOYOTA PRIUS RECALL

Toyota announced a recall involving 20162018 Prius models built from June 2015 to May 2018. A portion of the engine wiring harness connected to the hybrid power control unit (PCU) could contact the cover at this connection and wear, causing an electrical short circuit.

INFORMATION COURTESY OF MITCHELL 1

CADILLAC FUNKY CADDY EPS

This bulletin applies to 2015-2017 Cadillac Escalade vehicles. Some customers may comment about a temporary loss of electric power steering assist (EPS) followed by a sudden return of EPS assist, particularly during low-speed turning maneuvers. The loss and sudden return of EPS assist typically happens within a one-second period and is caused by an electrical/software issue.

This may be due to a sudden loss of voltage to the EPS system, where the EPS turns off and then back on as the voltage returns when the EPS load is removed.

To prevent the sudden loss of assist, a revised EPS module software has been developed to reduce the severity of the toggling event. Re-program the power steering control module.

NOTE: Do not attempt to order the calibration number from GM Customer Care and Aftersales. The calibration numbers required for this service procedure are programmed into control modules via a Multiple Diagnostic Interface (MDI) with the calibration update.

If you cannot access the calibration, call the Techline Customer Support Center and it will be provided.

INFORMATION COURTESY OF WWW.MOTOLOGIC.COM

Engineered and assembled in the USA

ADS 325 ADS 625

Bosch ADS Series

Now includes Repair-Source with software subscription

Comprehensive OE service and repair information library includes DTC troubleshooting workflows, repair procedures, maintenance schedules, TSBs, wiring diagrams, component locations, labor times and more.

Powerful hardware and features Android 5.0 plus 64GB SSD for fast processing, printing and file sharing Ultra-crisp 7" and 10" high-resolution displays for optimum viewing in all lighting conditions 5MP cameras enable sharing photos and vehicle scan reports On ADS 625: wireless, J2534-compliant VCI and dual Wi-Fi cards for strong web and VCI connection, industry-leading full color OE system wiring diagrams On-tool and online repair information* Identifix database of over 30 million confirmed fixes, maintenance procedures, TSB references, key reprogramming, and more. Lifetime Warranty** When you have an active, unlapsed diagnostics subscription. Coverage Full system coverage for Domestic, Asian and European vehicles, continually updated and enhanced. No extra subscription fees Repair-Source library, Identifix database, and more included with diagnostics subscription – over $3,000 annual value+.

Scan the code with your smartphone camera or compatible QR reader to watch a video about Repair-Source

BUICK BUICK ECM

This bulletin applies to 2018 Buick Enclave, 2017-2018 LaCrosse and 2018 Regal vehicles. Some customers may comment that the MIL is on, The technician may find DTC P0459 The first two characters in the red box are the year (evaporative emission purge solenoid valve control circuit high (A) and the next red box is the Julian date (B) that corresponds to a day of the year. The last 4 numbers are a unique sequential number built that day. voltage) set in the ECM as active or history. This condition may be caused by an inter- circuit performance. If issues are found, refer action between the ECM and purge solenoid that to the service manual for repair and inspect the can cause the DTC to set under certain conditions. ECM’s Julian date. If no issues are found, inspect The condition may be more noticeable in colder the ECM’s Julian date. climates. • An ECM with a Julian date between • Follow the diagnostic procedure for DTC 1A18053 17 074 XXXX (March 15, 2017) and 18 P0459 in th4e service manual. 046 XXXX (Feb. 15, 2018) is to be replaced. The • Validate the EVAP purge solenoid and/or new ECM is available as P/N 12687296.

PORSCHE PORSCHE LOOSE SCREW

This bulletin applies to 2017 Porsche 718 Boxster models equipped with a 2.5L engine. Screws on the holder for the catalytic converter on the cylinder head may loosen. In the event that a screw for the catalytic converter holder is loose, the catalytic converter holder and both screws must be replaced.

Modified screws and holders have been installed during production since May 19, 2016. • Remove the turbocharger. • Replace the holder on the cylinder head with a new holder P/N 982.251.305.C. with new screws P/N 900.378.131.00. Tighten both screws to 19 ft.-lbs. (25 Nm). • Install the turbocharger.

INFORMATION COURTESY OF MITCHELL 1

INFORMATION COURTESY OF MITCHELL 1

If one or both screws have loosened, replace the holder (A) and both holder screws (B). Revised holder and screws are available (see part numbers in the text).

CHEVROLET NO SHIFT DISPLAY

This bulletin applies to 2009-2018 Chevy Impala models equipped with automatic transmissions. Some customers may comment that the MIL lamp is on. In “rare” cases, they may also note that there is no PRNDL display. When checking for DTCs, technicians may find P182E (internal mode switch indicates invalid range) set as active or history in the transmission control module (TCM).

Verify proper shift cable adjustment. Verify proper ECM Park/Neutral switch status in all ranges. Verify proper internal mode switch (IMS) A/B/C/P parameters in all ranges. Perform the diagnostic repair verification after completing any repairs.

Note: If DTC U0101 is set as active or history in the electronic brake control module, it should be ignored, as it has been found to the falsely setting.

INFORMATION COURTESY OF WWW.MOTOLOGIC.COM

CRP offers AAE EPS reman parts for Chevy, GMC and Buick CRP Automotive offers coverage for AAE EPS rack & pinion on popular Buick, Chevy and GMC models. Remanufactured under the Manufactured Again Certified process, AAE electric power steering racks are a direct replacement for failed OEM units, the company notes. During remanufacturing, each unit is disassembled, cleaned, and all wear components are replaced. Every unit is 100% tested to ensure OE performance and durability. Applications for AAE #ER1106 include LaCrosse (2012-16), Regal (201217), Impala (2014-16), and Malibu (2013). AAE #ER4111 covers Silverado 1500 (2014-15) with a crew cab, and AAE #ER1113 fits Silverado 1500 and Sierra (2014-16) with a standard cab.

CRP AUTOMOTIVE WWW.CRPAUTOMOTIVE.COM

Bartec Rite-Sensor line is easily programmable Bartec USA has introduced its own line of tire pressure monitoring system sensors under the Rite-Sensor brand. Rite-Sensor sensors are programmable, enabling technicians to use a Bartec Tech400SD or newer TPMS tools to configure them based on a vehicle’s make, model and year. They also come with dual valve options and represent a single SKU solution, which helps reduce inventory, according to Bartec officials.

BARTEC USA LLC WWW.BARTECUSA.COM

Continental touts fit of VDO Mass Air Flow Sensors VDO Mass Air Flow Sensors from Continental Commercial Vehicles & Aftermarket are identical in fit, form and performance to OE air flow sensors. They feature easy plug-and-play installation and are designed to deliver long service 56

life, optimal reliability and enhanced durability under demanding environmental conditions. Key applications include popular models from BMW, Kia, Hyundai, Land Rover, MercedesBenz and Volvo, say Continental officials.

CONTINENTAL COMMERCIAL VEHICLES & AFTERMARKET WWW.CONTINENTAL-AUTOMOTIVE.COM

Akebono adds part numbers to disc brake pad kits Akebono Brake has added four part numbers to its ultra-premium disc brake pad lines, increasing coverage by 1.2 million vehicles. The total includes three ProAct parts numbers and one Euro part number. Premium, stainless steel abutment hardware is included in the two ProAct kits that require it. The Euro kit includes an electronic wear sensor. The ProAct expansion adds coverage for the Buick LaCrosse, Buick Regal and Chevrolet Malibu, while the Euro line expansion adds coverage for the Mercedes-Benz CLA250 and GLA250.

AKEBONO BRAKE CORP. WWW.AKEBONOBRAKES.COM

Ken-Tool upgrades bead seater tool Ken-Tool Corp. has unveiled a new version of its Mega AirBlast Bead Seater tool, which is made from aluminum, making it extremely light and easy to handle. The updated Mega AirBlast Bead Seater tool also features push-button technology for faster release of air. And it comes with a digital gauge with backlight capability.

KEN-TOOL CORP. WWW.KENTOOL.COM

New Autel ADAS calibration system is portable The new Autel MaxiSys MA600 ADAS Calibration System folds and disassembles easily, enabling technicians to calibrate advanced driver assistance programs in multiple locations. Stored in a flight case for secure handling, the unit features a two-line and fiveline laser leveling process for new vehicle squaring, faster frame centering placement and one-person set-up within two minutes. The MA600 is compatible with the following tablets: MS906BT, MS906TS, MS908, MS908P, MS908S, MS908SP, MSELITE and MSADAS. A video library of training support for the MA600 is available.

AUTEL INTELLIGENT TECHNOLOGY CORP. WWW.AUTELTECH.COM

Gaither introduces next-gen mobile tire service unit Gather Tool Co. Inc. has introduced the latest version if its E-Cube compact mobile tire servicing unit, which features a semi-automatic tire changer, wheel balancer, and silenced air compressor. Powered by a lithium ion battery bank, the unit measures 59 inches long, 22 inches wide and 73.25 inches tall, and weighs 990 pounds. The E-Cube is small enough to fit inside a van, box truck or trailer while allowing space for jacks, safety equipment and other items.

GAITHER TOOL CO. INC. WWW.GAITHERTOOL.COM

Apex tool features extraction sockets The new GearWrench Bolt Biter Extraction Sockets from Apex Tool Group are designed for quick removal of stubborn fasteners. The sockets’ design easily slides onto rounded fasteners with no hammering and can fit onto fasteners that have worn down past their original size. The sockets also allow for easy disengagement and fastener re-installation. They are available individually and also in eight, 15 or 28-piece sets, and can be used with impact guns, ratchets, wrenches and pliers.

APEX TOOL GROUP LLC WWW.APEXTOOLGROUP.COM

New CRC SmartWasher is portable The new CRC SmartWasher BenchtopPRO bioremediating parts washer is portable and employs a powerful, waterbased degreasing solution to clean parts while breaking down and converting oil, grease and carbon-based contaminants. Its self-cleaning design allows the degreasing solution to be used repeatedly.

CRC INDUSTRIES WWW.CRCINDUSTRIES.COM

Martins tire cart can carry heavier loads Martins Industries has upgraded its Tire Rider Tuff tire cart, replacing its gas cylinder with a steel spring mechanism that comes with a lifetime warranty, and boosting the device’s load carrying capacity from 400 pounds to 500 pounds. At the same time, Martins has reduced the Tire Rider Tuff cart’s weight from 106 pounds to 79 pounds. The rubber wheels are solid and therefore flat free.

MARTINS INDUSTRIES WWW.MARTINSINDUSTRIES.COM

Instant information from ASP advertisers AD INDEX

You’re mere seconds away from receiving free product information. Just go to the website(s) listed to the right of each advertiser below and you’re there! Instant product information at your fingertips.

Advertiser

31 Incorporated

ADVICS North America

Aftermarket Auto Parts Alliance Inc.

Arnott Inc.

AUTEL

Bosch Diagnostics

Castrol

Chevron

ClearContact

Clore Automotive

ContiTech

Cooper Tires

CRP/Rein Automotive

Drew Technologies

Lang Tools

MAHLE Aftermarket Inc.

Mighty Auto Parts

Motorcraft

NRSBrakes

O’Reilly Auto Parts

Schrader Sensors

SKF USA Inc.

Standard Motor Products Inc.

Page

IFC

13

43

55

5, 47

53

IBC

23

19

50

27

37

29

31, 51

49

15

41

21

OBC

9

52

7

39

Website

www.31inc.com

www.advicsaftermarket.com

www.bigraceweekend2020.com

www.trustarnott.com

www.autel.com

www.boschdiagnostics.com

www.mycastrolepods.com

www.havoline.com/profitlight

www.continental-clearcontact.com

www.cloreautomotive.com

www.oetechnologyseries.com

www.coopertire.com

www.reinautomotive.com

www.drewtech.com/asp

www.langtools.com

www.mahle-aftermarket.com

www.mightyautoparts.com

www.motorcraft.com

www.nrsbrakes.com

www.firstcallonline.com

www.schradersensors.com

www.vsm.skf.com

www.standardbluestreak.com