General Information Final Program Content Executive Committee & General Information....................................... page 1 Sunday Schedule & Award Sponsors................................................... page 2 Monday Schedule............................................................................... page 3 Poster Session & Reception................................................................ page 7 Tuesday Schedule............................................................................... page 9 Wednesday Schedule........................................................................ page 13
Registration/Information Hours Boardroom A Foyer, First Floor Sunday, February 22 Monday, February 23 Tuesday, February 24 Wednesday, February 25
Noon – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 a.m. – 5:00 p.m. 7:00 a.m. – Noon
Executive Committee President Anand Jagota Lehigh University
Immediate Past President Kenneth Shull Northwestern University
Vice President Greg Schueneman USDA Forest Products Lab.
Secretary Leonardo Lopez Dow Chemical Company
Treasurer Charles Shuster Franklin International Inc.
2015 Program Chair/Editor Carlos Barrios, 3M Company Members at Large Joelle Frechette Johns Hopkins University
Charles Paul Henkel Corporation
Structural Adhesives Division Chair Alojz Ivankovic University College Dublin, Ireland
Soft Adhesives Division Chair David Yarusso, 3M Company Home Office Manager/Onsite Contact Malinda Armstrong, The Adhesion Society
Atrium, First Floor
2015 Exhibitors • ASI Magazine • IMASS Inc. • KRUSS USA • Kyowa Interface Science Co., Ltd. • Macromolecules and Interfaces Institute at Virginia Tech • Netzsch Inc. • Synasia Inc.
Proceedings*
In keeping with the continuing efforts to make our event more environmentally friendly, hard copies of presentations will not be available. You can locate the proceedings either on CD which was included in your packet or on the Adhesion Society website. *Not all presenters have authorized the Adhesion Society to publish their abstract.
1 The Adhesion Society 2015
Please recycle this program when done.
Noon to 5:00 p.m. Registration Boardroom A Foyer, First Floor 015 Award for Excellence in 2 Adhesion Society Symposium Sponsored by 3M – Honoring Kenneth Liechti, University of Texas at Austin Ballroom C, First Floor 1:30 to 4:45 p.m.
1:30 p.m. Introductory Remarks Dave Reedy, Sandia National Laboratories 1:45 p.m. Fracture Tests and Analysis Kai-Tak Wan, Northeastern University
2:15 p.m. A Simple Mixed-Mode Dependent CZM with Illustrative Examples David Reedy, Sandia National Laboratories
2:45 p.m. Interface Adhesion and Fracture in Nanomanufacturing Processes Kevin Turner, University of Pennsylvania
3:15 p.m. Interfacial Adhesion of Graphene by Multiscale Models Rui Huang, University of Texas at Austin
3:45 p.m.
BREAK
4:15 p.m.
F rom Interfacial Fracture Mechanics to Adhesive Interactions Kenneth Liechti, University of Texas at Austin
3:00 – 8:30 p.m. 5:00 – 6:00 p.m. 6:30 – 8:30 p.m.
Exhibition Atrium, First Floor Business Meeting Ballroom C, First Floor Presidents Reception & Exhibits Riverwalk (weather backup Atrium, First Floor)
Award Sponsors A special “THANK YOU” to our generous sponsors of the following awards: •A dhesion Society Award for Excellence in Adhesion Science sponsored by 3M • T he Robert L. Patrick Fellowship Award sponsored by The Adhesion Society • Distinguished Paper Award sponsored by the Henkel • Peebles Awards for Graduate Student Research in Adhesion Science • Alan Gent Distinguished Student Paper Award sponsored by Henkel • Best Poster Award sponsored by Avery Dennison • Adhesion Society Young Scientist Award sponsored by the Adhesive & Sealant Council 38th Annual Meeting Final Program 2
7:00 a.m. – 5:00 p.m. Registration
Boardroom A Foyer, First Floor
7:00 – 7:45 a.m.
Networking Breakfast Atrium, First Floor
8:00 – 8:45 a.m.
lenary Talk I: Biomimetic Adhesive P Microstructures as an Approach to Understand Functioning of Biological Systems Stanislav Gorb, Zoological Institute of the University of Kiel
Ballroom C, First Floor
Morning Technical Sessions – 9:00 a.m. to 12:30 p.m. Bioinspired Adhesion I: Synthetic Design
Friction & Adhesion
Ballroom C, First Floor
Session Chair: Ali Dhinojwala, The University of Akron & Noshir Pesika, Tulane
Session Chair: Alyssa Stark, University of Louisville
9:00 to 9:30 a.m.
Keynote
Solutions for Adhesion Underwater Arauzazu del Campo, Max Planck Institut für Polymerforschung
9:30 to 10:00 a.m.
Ballroom D, First Floor
9:00 to 9:30 a.m.
Keynote
Adhesive Contact of a Rigid Sphere to a Soft Elastic Substrate – the Role of Surface Tension Chung Yuen Hui, Cornell University
Geckos as Springs: Decreased Compliance Enables Larger Geckos to Climb Walls Duncan Irschick, University of Massachusetts
9:30 to 10:00 a.m.
10:00 to 10:30 a.m.
10:00 to 10:30 a.m.
Effect of Nitro-Group Functionalization on the Cross-linking and Bioadhesion of Biomimetic Catechol-Based Adhesive Bruce Lee, Michigan Technological University
On Adhesion Mechanisms and Erosions Effects of NanoparticleSuspensions (Nanofluids) on Cooling System Materials Gustavo Molina, Georgia Southern University
10:30 to 11:00 a.m.
10:30 to 11:00 a.m.
11:00 to 11:30 a.m.
11:00 to 11:30 a.m.
Nanotextured Adhesives from Colloidal Templates Marleen Kamperman, Wageningen University
Extracting Rate Dependent Traction Separation Relations for Cracks/ Interfaces in Viscoelastic Media Naga Sundeep Palvadi, The University of Texas at Austin
BREAK
11:30 a.m. to Noon Switchable Dry Adhesion Using Shape Memory Polymer Babak Soltannia, University of Alberta
Noon to 12:30 p.m. A Blood-Resistant Surgical Glue for Minimally Invasive Repair of Vessels and Heart Defects Yuhan Lee, Brigham and Women’s Hospital 3 The Adhesion Society 2015
Enhancement of Friction against a Rough Surface by a Ridge-Channel Surface Microstructure Anand Jagota, Lehigh University
BREAK
11:30 a.m. to Noon Out-of-Contact Elastohydrodynamic Deformation of Elastomers Joelle Frechette, Johns Hopkins University
Structural Adhesives I
Natural Phenomena I: Natural Surfaces
Ballroom E, First Floor
Plaza Meeting Room, First Floor
Session Chair: Alojz Ivankovic, University College Dublin
9:00 to 9:30 a.m.
Session Chair: Christopher Wohl, NASA Langley Research Center
Keynote
Fracture Behavior of Epoxy-Matrix Hybrid Nanocomposites Raymond Pearson, Lehigh University
9:30 to 10:00 a.m. Sand Particles Biocement Interface and Its Influence on Cementing Chunxiang Qian, Southeast University
10:00 to 10:30 a.m. Investigation of the Influence of Humidity and Temperature on the Crack Growth in Adhesively Bonded Joints under Cyclic Load Paul Ludwig Geiss, University of Kaiserslautern
9:00 to 9:30 a.m.
Keynote
Coatings for the Prevention of Ice-Accretion and InsectContamination - Approaches, Examples and Limitations Volkmar Stenzel, Fraunhofer IFAM
9:30 to 10:00 a.m. Contaminant Adhesion to Exterior Aircraft Surfaces Jill Seebergh, The Boeing Company
10:00 to 10:30 a.m. Effect of Cruise Conditions on Insect Residue Adhesion Sonia Tulyani, United Technologies Research Center
10:30 to 11:00 a.m.
10:30 to 11:00 a.m.
11:00 to 11:30 a.m.
11:00 to 11:30 a.m.
Crash-Proof Bonding of FRP‘s with 2 Component Adhesives in the BIW Shop Stefan Bohm, University Kassel
Flight Testing Surfaces Engineered for Mitigating Insect Adhesion on a Falcon HU-25C Michelle Shanahan, National Institute of Aerospace
BREAK
BREAK
11:30 a.m. to Noon A Unifying Local-Global Partitioning Theory based on Global Cohesive Zone Solution Mark Conroy, University College Dublin
Noon to 12:30 p.m.
11:30 a.m. to Noon Influence of Surface Wetting on Hemolymph Drop Impact Adhesion Eric Loth, University of Virginia
Synergistic Effects in the Fracture Performance of Epoxy Polymers Modified with Silica and Silicone Nanoparticles Declan Carolan, Imperial College London
12:30 to 1:30 p.m. – Lunch on Your Own 12:30 to 1:30 p.m. – Soft Adhesives Division Meeting
Johnson Meeting Room, Second Floor
12:30 to 1:30 p.m. – Structural Adhesives Division Meeting Johnson Meeting Room, Second Floor
4
Afternoon Technical Sessions – 1:30 p.m. to 5:30 p.m. Bioinspired Adhesion II: Synthetic Testing
Alan N. Gent Session
Ballroom C, First Floor
Session Chair: Gregory Schueneman, USDA Forest Products Laboratory & Charles Paul, Henkel Corporation
Session Chair: Joelle Frechette, Johns Hopkins University
Ballroom D, First Floor
1:30 to 2:00 p.m.
1:30 to 2:00 p.m.
Nanoscale Adhesion and Mechanical Properties of Bamboo Microfibrils Nima Rahbar, Worcester Polytechnic Institute
Damage Behavior of Core Shell Rubber Particles Toughened Epoxy Adhesives Using J-CDNT Test Dong Quan, University College Dublin
2:00 to 2:30 p.m.
2:00 to 2:30 p.m.
A Computational Multiscale Approach for the Modeling of Fibrillar Adhesives Janine Mergel, RWTH Aachen University
Load Induced Hydrodynamic Lubrication of Porous Films Tushar Khosla, Tulane University
2:30 to 3:00 p.m.
The Role of Water in Adhesion and Friction Adrian Defante, University of Akron
Environmental Influences on the Extensibility of Orb-Weaving Spiders’ Adhesive, Viscous Droplets Sarah Stellwagen, Virginia Tech
3:00 to 3:30 p.m. BREAK
3:30 to 4:00 p.m. Effect of Roughness on Adhesion of Bioinspired Gecko Mimicking Adhesive Systems Viktoriia Barreau (Boiko), INM – Leibniz Institute for New Materials and Saarland University
4:00 to 4:30 p.m. Biomimetic Wall-Shaped Hierarchical Microstructure for Gecko-Like Attachment Michael Varenberg, Georgia Institute of Technology
4:30 to 5:00 p.m. The Effect of Temperature and Humidity on Gecko-Inspired Synthetic Adhesives Alyssa Stark, University of Louisville
5:00 to 5:30 p.m. Viscous Contribution to Peeling Adhesion Joelle Frechette, Johns Hopkins University
5 The Adhesion Society 2015
2:30 to 3:00 p.m.
3:00 to 3:30 p.m. BREAK
3:30 to 4:00 p.m. Detection of Adhesive Disbonds through Structural Health Monitoring William Roth, University of South Carolina
4:00 to 4:30 p.m. Toughened Epoxy Systems via Incorporation of Partially-Reacted Substructures Majid Sharifi, Drexel University
4:30 to 5:00 p.m. Debonding of an Elastomeric Layer from a Flexible Plate Using Cohesive Zone Model Bikramjit Mukherjee, Virginia Tech
5:00 to 5:30 p.m. Experimental Investigation of Maximal Adhesion of Bio-Inspired Micro-Fiber Adhesives with Mushroom Shaped Tip Endings Sukho Song, Carnegie Mellon University
Novel Chemistries Ballroom E, First Floor
Natural Phenomena II: Ice Adhesion Prevention
Session Chair: Tim Long, Virginia Tech & Stephen Willging, H.B. Fuller Company
Session Chair: Douglas Berry, The Boeing Company
1:30 to 2:00 p.m.
Keynote
Is Anionic Polymerization Dead or Radically Changing? Timothy Long, Virginia Tech
2:00 to 2:30 p.m. Prevention of Cathodic Delamination of Polyurethane Adhesive from Ti-Al6-4V Alloy Using Fluorinated Primers Andrew Gilpin, University of Cincinnati
2:30 to 3:00 p.m.
Plaza Meeting Room, First Floor
1:30 to 2:00 p.m. Ice Adhesion: Science and Applications Victor Petrenko, Dartmouth College, Thayer School of Engineering
2:00 to 2:30 p.m. Development of Materials and Simulation Models for Ice Mitigation Richard Kreeger, NASA Glenn Research Center
2:30 to 3:00 p.m.
BREAK
Adhesion of Ice to Polymer Surfaces: A New Laboratory Test Provides Insights Concerning Physical and Mechanical Properties Favoring Easy Release Kenneth Wynne, Virginia Commonwealth University
3:30 to 4:00 p.m.
3:00 to 3:30 p.m.
3D Printing Hierarchical Polymeric Structures for Tissue Scaffolding and Cell Adhesion Alison Schultz, Virginia Tech
3:30 to 4:00 p.m.
Hot Melt Adhesives Using New Metallocene Propylene Performance Polymers Jennifer Austin, ExxonMobil Company
3:00 to 3:30 p.m.
4:00 to 4:30 p.m. Adhesion Properties of DopamineBased Biodegradable Amino Acid-Based Poly(ester urea)s Matthew Becker, The University of Akron
4:30 to 5:00 p.m.
BREAK
Accreted Ice Adhesion Measurement Caroline Laforte, UniversitĂŠ of QuĂŠbec at Chicoutimi
4:00 to 4:30 p.m. Anti-icing Focused Low Adhesion Polymer Coatings Adam Gross, HRL Laboratories, LLC
4:30 to 5:00 p.m.
Poly(p-diphenylphosphino styrene): Phosphonium Formation and Anion Exchange Chainika Jangu, Virginia Tech
Slippery Liquid-Infused Porous Surfaces (SLIPS) as Icephobic Materials Philseok Kim, Harvard University
5:00 to 5:30 p.m.
5:00 to 5:30 p.m.
Physically Cross-linked Acrylics with Enhanced Mechanical Strength and Processability: From DNA to Supramolecular Pressure Sensitive Adhesives Keren Zhang, Virginia Tech
The Effect of Surface Chemical Functionality upon Ice Adhesion Joseph Smith, NASA Langley Research Center
38th Annual Meeting Final Program 6
6:30 to 8:30 p.m.
Atrium, First Floor
1. Lubricating Flows by Sheathing Solid Surfaces Glen McHale, Northumbria University 2. Measuring Contact Angles Inside of Capillary Tubes with a Tensiometer Chuck Extrand, Colder Products Company (CPC) 3. Influence of Surface Properties and Impact Conditions on Adhesion of Insect Residues Christopher Wohl, NASA Langley Research Center 4. The Surface Protective Tape Properties on the Variety Surface of the Metal Plate Adhered Young Soo Na, Segye Chemical industry Co. Ltd. 5. Novel Methods for Understanding the Evolution of Gecko Toepads Duncan Irschick, University of Massachusetts at Amherst 6. Deformation of a Confined Elastic Layer Using a Flat Punch in Shear Michael Imburgia, University of Massachusetts 7. Fracture-Healing Kinetics of Physically Associating Thermoreversible Gels Travis Thornell, Purdue University
7 The Adhesion Society 2015
8. Non-Isocyanate Urethane Engineered Hydrogels for Anti-fouling Applications Laura Villada, University of Florida 9. Random Acrylate Copolymer Surface Grafting to Poly(dimethyl siloxane) Elastomer Surfaces for Controlling Bio-Adhesion Cary Kuliasha, University of Florida 10. Characterizing the Effect of Bondline Thickness on Mixed Mode Fracture of Adhesive Joints Ivan Vu, Virginia Polytechnic Institute and State University 11. Cocrystallization in Hot Melt Adhesives Charles Paul, Henkel Corporation 12. Hybrid Curable OCA for New Assembly Line of Touch Screen Panel Hyun-Joong Kim, Seoul National University 13. Evaluation of UV-Curing Kinetics of the UV Polymerized Adhesives with Poly(ethylene glycol) Dimethacrylate Ji-Won Park, Seoul National University 14. The Effect of Weight Reduction by Dispensing Striped Adhesive to the Honeycomb Sandwich Panel 3 Koji Kamiyama, Mitsubishi Electric Corporation 15. 3D-Printed Biodegradable Polyester Tissue Scaffolds for Cell Adhesion Justin Sirrine, Virginia Tech
38th Annual Meeting Final Program 8
7:00 a.m. – 5:00 p.m. Registration
Boardroom A Foyer, First Floor
7:00 – 7:45 a.m.
Networking Breakfast Atrium, First Floor
8:00 – 8:45 a.m.
lenary Talk II: Molecular P Nanoparticles Are Unique Elements for Macromolecular Science
Stephen Cheng, The University of Akron
Ballroom C, First Floor
Morning Technical Sessions – 9:00 a.m. to 12:30 p.m. Bioinspired Adhesion III: Synthetic Testing
Soft Materials I: Chemistry & Interfaces
Ballroom C, First Floor
Ballroom D, First Floor
Session Chair: Burak Aksak, Texas Tech University
Session Chair: Eric Silverberg, Henkel Corporation
9:00 to 9:30 a.m.
9:00 to 9:30 a.m.
Contact Formation Between Adhesive Micro-Patterned Elastomer Surfaces Liliane Leger, Université Paris-Sud
Stiff Particles on Compliant Substrates: Adhesion or Wetting? Katharine Jensen, Yale University
9:30 to 10:00 a.m. Visualizing the Deformation of the Interface of a Single Fiber Silk Composite Chelsea Davis, National Institute of Standards and Technology
10:00 to 10:30 a.m. Adhesion Enhancement Between a Gel and Elastomer by Shape Complementarity Adhesive Dadhichi Paretkar, Lehigh University
10:30 to 11:00 a.m. BREAK
11:00 to 11:30 a.m. The Effect of Tip Size on the Adhesion Strength of Bioinspired Mushroom Like Fibers Burak Aksak, Texas Tech University
11:30 a.m. to Noon Mechanical Comparison of BioComposites Based on Chitosan and Alginate with Potencial as Bone Adhesive for Trauma Surgery Francisco Javier Cedano Serrano, Universidad de Los Andes
9 The Adhesion Society 2015
9:30 to 10:00 a.m. Formulating Polymer Adhesive Blends Using Electrospinning Process Shing-Chung Wong, University of Akron
10:00 to 10:30 a.m. Development of Novel Waterborne Functional Polyolefin Primers/ Adhesives Grace Wan, Dow Chemical Company
10:30 to 11:00 a.m. BREAK
11:00 to 11:30 a.m. Synthesis and Evaluation of Hybrid Curing OCA Using UV Polymerization Hyun-Joong Kim, Seoul National University
11:30 a.m. to Noon Leveraging Sustainable Materials in Hot Melt Adhesives Charles Paul, Henkel Corporation
Structural Adhesives II
Interfacial Phenomena
Ballroom E, First Floor
Plaza Meeting Room, First Floor
Session Chair: Xing Yang, Virginia Tech
Session Chair: Anish Kurian, 3M Company
9:00 to 9:30 a.m.
9:00 to 9:30 a.m.
Mechanical and Cathodic Delamination Inhibiting Properties of Atmospheric Pressure Plasma Polymerized HMDSO Bing Han, University of Cincinnati
The Flame Treatment of Injection Molded Polypropylene: New Insights on an Established Process John Watts, University of Surrey
9:30 to 10:00 a.m. Modelling Fatigue Crack Growth in Structural Adhesive Joints Tony Kinloch, Imperial College London
The Interaction of MDI with Stainless Steel: The Role of Water in the Formation and Destruction of Interfacial Bonds Sabrina Tardio, University of Surrey
10:00 to 10:30 a.m.
10:00 to 10:30 a.m.
Elevated Temperature Adhesion Testing of Spray-Applied FireResistive Materials Chris White, National Institute of Standards and Technology
The Interaction of MDI with 316L Stainless Steel and Constituent Metals Marie-Laure Abel, University of Surrey
10:30 to 11:00 a.m.
10:30 to 11:00 a.m.
11:00 to 11:30 a.m.
11:00 to 11:30 a.m.
Design of Cold-Bonded FRP-Steel Hybrids Katharina Henkel, University of Paderborn
Laminated Glass: Dynamic Rupture of Adhesion Between Glass and PVB Paul Elziere, Saint-Gobain/SIMM ESPCI ParisTech
11:30 a.m. to Noon
11:30 a.m. to Noon
Influences of Manufacturing, Process Parameters and Their Tolerances on the Crash-Behavior of Adhesive Bonds - Experimental and Numerical Investigation Georg Schwarzkopf, University of Kassel
Simple and Improved Approaches to Long Lasting, Hydrophilic Silicones Derived from Commercially Available Precursors Wei Chen, Mount Holyoke College
9:30 to 10:00 a.m.
BREAK
Noon to 12:30 p.m. Calculation of High Cycle Fatigue Behaviour of Structural Adhesive Joints Andreas Wulf, Fraunhofer-IFAM
BREAK
Noon to 12:30 p.m. Hydrophobicity on Aerospace Glass Windows Frank Nguyen, PPG Aerospace
12:30 to 1:30 p.m. – Lunch on Your Own 12:30 to 1:30 p.m. – 2016 Program Planning Meeting
Johnson Meeting Room, Second Floor 38th Annual Meeting Final Program 10
Afternoon Technical Sessions – 1:30 p.m. to 5:30 p.m. Computational Modeling
Soft Materials II: PSAs
Ballroom C, First Floor
Ballroom D, First Floor
Session Chair: Mesfin Tsige, The University of Akron
Session Chair: David Yarusso, 3M Company
1:30 to 2:00 p.m.
Keynote
Molecular Dynamics Simulation of Fracture Initiation at a Corner Mark Stevens, Sandia National Laboratories
2:00 to 2:30 p.m. Bioinspired Adhesive and Computational Design of Interfacial Materials Zhao Qin, MIT
2:30 to 3:00 p.m. Rate Dependent Fracture Considering Polymer Chain Reforming Within an Adhesive Zone Model Shawn Lavoie, University of Alberta
3:00 to 3:30 p.m. BREAK
3:30 to 4:00 p.m. Assessment of Interface Energy in High Velocity Particle Impacts Sinan Muftu, Northeastern University
4:00 to 4:30 p.m. Finite Volume Adaptive Concurrent Multiscale Model for Damage Propagation in Heterogeneous Structures Zeljko Tukovic, University College Dublin
4:30 to 5:00 p.m. Smoothing of Contact Lines in Spreading Droplets by Trisiloxane Surfactants Ahmed Ismail, RWTH Aachen University
5:00 to 5:30 p.m. Surface Wetting and Dynamics of Nanoscale Droplets: Effect of Surface Chemistry Mesfin Tsige, The University of Akron
11 The Adhesion Society 2015
1:30 to 2:00 p.m.
Keynote
Ultra-High-Speed Imaging of Rapid Tape Peeling Sigurdur Thoroddsen, King Abdullah University of Science and Technology
2:00 to 2:30 p.m. Peeling Angle and Inertia Effects on Stick-Slip Peeling Dynamics Loic Vanel, UniversitĂŠ Claude Bernard Lyon 1
2:30 to 3:00 p.m. Influence of Large Strain Rheology on the Adhesive Performances of PSA Matteo Ciccotti, ESPCI Paristech
3:00 to 3:30 p.m. BREAK
3:30 to 4:00 p.m. Linear Rheology and Adhesive Properties of Bis-Urea Functionalized Supramolecular Poly(butylacrylate)s Costantino Creton, ESPCI ParisTech
4:00 to 4:30 p.m. Synthesis of Curdlan Derivatives Regioselectively Modified to Interact with Proteins Joyce Kuang, Virginia Tech
4:30 to 5:00 p.m. Time Dependent Behavior of a Dual Cross-Link Self-Healing Gel: Theory and Experiments Chung Yuen Hui, Cornell University
Surface-Liquid Interactions Ballroom E, First Floor Session Chair: Chuck Extrand, Colder Products Company (CPC)
1:30 to 2:00 p.m.
Keynote
Liquid-in-Fluid Dielectrowetting Glen McHale, Northumbria University
2:00 to 2:30 p.m. Air Retaining Surfaces: Backswimmers and Floating Ferns Inspire Ships to Save Fuel Matthias Mail, University of Bonn
2:30 to 3:00 p.m. Characteristics of Reactive-Wetting at Room Temperature Adhesive, Viscous Droplets Haim Taitelbaum, Bar-Ilan University
3:00 to 3:30 p.m. BREAK
3:30 to 4:00 p.m. Silicon-Containing Reagents to Control Properties of Inorganic Surfaces: Some Overly Complicated Systems and Some Very Simple Systems Thomas McCarthy, University of Massachusetts
4:00 to 4:30 p.m. Super-Hydrophilic Surfaces by Photo-Induced Micro-Folding Thomas Bahners, Deutsches Textilforschungszentrum Nord-West
4:30 to 5:00 p.m. Facile and Eco-Friendly Synthesis of Stimulus-Responsive Superoleophobic Polymer Brushes Atsushi Hozumi, National Institute of Advanced Industrial Science and Technology (AIST)
5:00 to 5:30 p.m. Repellency of the Lotus Leaf: Contact Angles, Drop Retention and Sliding Angles Chuck Extrand, Colder Products Company (CPC)
Measurement & Characterization I Plaza Meeting Room, First Floor Session Chair: Chelsea Davis, National Institute of Standards and Technology
1:30 to 2:00 p.m.
Keynote
Neutron Reflectivity as a Tool to Study the Interdigitation of Grafted Polymer Chains and its Dynamicss Frédéric Restagno, Université Paris-Sud
2:00 to 2:30 p.m. Polymer Brush Conformation and Adhesion Behavior Using Quartz Crystal Microbalance John Howarter, Purdue University
2:30 to 3:00 p.m. Applications of Quartz Crystal Resonators in Tracking Viscoelasticity and Degradation Processes Joshua Yeh, Northwestern University
3:00 to 3:30 p.m. BREAK
3:30 to 4:00 p.m. Constitutive Relations and Parameter Estimation for Finite Deformations of Viscoelastic Adhesives Romesh Batra, Virginia Tech
4:00 to 4:30 p.m. Monitoring Sealant Durability during Instrumented Outdoor Exposure with Variation in Prestrain Gregory Schueneman, USDA Forest Service Forest Products Laboratory
4:30 to 5:00 p.m. Rheological Analysis of the Gelation of a Thermoset Epoxy Adhesive Paul Ludwig Geiss, University of Kaiserslautern
5:00 to 5:30 p.m. Mechanical and Structural Characterization of Polyamide Thin-Film Composites for Water Desalinization Shawn Chen, Northwestern Universityty
12
7:00 a.m. – 5:00 p.m. Registration
Boardroom A Foyer, First Floor
7:00 – 7:45 a.m.
Networking Breakfast Atrium, First Floor
8:00 – 8:45 a.m.
lenary Talk III: Modification of P Polyolefin Films in the Manufacture of Adhesive Tapes Mark Strobel & Patrick Hager, 3M Company
Ballroom C, First Floor
Morning Technical Sessions – 9:00 a.m. to 12:30 p.m. Bioinspired Adhesion IV: Organisms
Soft III: Mechanics
Ballroom C, First Floor
Session Chair: Kenneth Shull, Northwestern University
Session Chair: Alfred Crosby, University of Massachusetts
Ballroom D, First Floor
9:00 to 9:30 a.m.
9:00 to 9:30 a.m.
Learning New Adhesion Lessons from Bioparticles Carson Meredith, Georgia Tech
Material and Damping Characterization of Discretized Adhesive Tapes in Cantilever Beams Undergoing Free and Forced Vibrations David Dillard, Virginia Polytechnic & State University
9:30 to 10:00 a.m. An Anti-Biofouling Strategy Using Curvature Controlled Surface Topographies Mehdi Kargar, Virginia Tech
10:00 to 10:30 a.m. The Effect of Surface Free Energy of the Substrate on Traction Force by the Longicorn Beetle Mari Nakamoto, University of Tokyo
10:30 to 11:00 a.m. BREAK
11:00 to 11:30 a.m.
9:30 to 10:00 a.m. Scaling-Up Wrinkles: Creating Controlled, Micron-Sized Patterns on Meter-Sized Surfaces Using a Roll and Plate Geometry Michael Imburgia, University of Massachusetts
10:00 to 10:30 a.m. Elastocapillary Rise Between Swellable Beams Douglas Holmes, Boston University
Contact Mechanics of MushroomShaped Adhesive Microstructures Lars Heepe, Kiel University
10:30 to 11:00 a.m.
11:30 a.m. to Noon
Multiscale Treatment of Mechanical Contact Problems in Thin Polymeric Layers Ahmed Ismail, RWTH Aachen University
Bioinspired Suction Attachment from the Sea Petra Ditsche, Friday Harbor Laboratories
BREAK
11:00 to 11:30 a.m.
11:30 a.m. to Noon Micromechanical Properties of Sintered Ag Conductor Lines on PV Cells Dadhichi Paretkar, Lehigh University
13 The Adhesion Society 2015
Structural Adhesives III Ballroom E, First Floor Session Chair: Zachary Thompson, 3M Company
Measurement & Characterization II Academy Meeting Room, First Floor Session Chair: Chelsea Davis, National Institute of Standards and Technology
9:00 to 9:30 a.m.
9:00 to 9:30 a.m.
Residual Stress Developed During the Cure of Thermosetting Polymers Jamie Kropka, Sandia National Laboratories
Polymer Microstructure and Poroelasticity in Click Hydrogels Edwin Chan, National Institute of Standards and Technology
9:30 to 10:00 a.m.
Molecular Weight Dependence of Interdiffusion and Adhesion of Polymers at Short Contact Times Robert Gurney, ESPCI Paristech
Adhesive Bonding of Composite Adherends: The Effect of Adherend Type on the Apparent Mode I Fracture Toughness Lisa Cahill, University College Dublin
10:00 to 10:30 a.m. The Mixed-Mode Fracture of Structural Adhesive Joints Bamber Blackman, Imperial College London
10:30 to 11:00 a.m. BREAK
11:00 to 11:30 a.m. Mechanical Properties and Toughening Mechanisms of Epoxy Modified with Block Copolymers Ambrose Taylor, Imperial College London
11:30 a.m. to Noon
9:30 to 10:00 a.m.
10:00 to 10:30 a.m. Thermo-Oxidative Stability of Reactive Adhesive Systems Frauke Bunzel, Technische Universit채t Braunschweig
10:30 to 11:00 a.m. BREAK
11:00 to 11:30 a.m. Adhesion and Degradation of Surface Modified Polymer Thin Films Using QCM Logan Kearney, Purdue University
11:30 a.m. to Noon Understanding and Evaluation on the Linear Shrinkage of Photo-Curing Behavior through the Experimental Approach and Numerical Modeling Ji-Won Park, Seoul National University
Targeted Gaps in Adhesive Bonding Performance Robert Jensen, U.S. Army Research Laboratory
Noon to 12:30 p.m. Modelling the Toughness of Adhesives Felicity Guild, Imperial College
38th Annual Meeting Final Program 14