Spring 2013 Final Program by The Adhesive & Sealant Council

Welcome to the 2013 Spring Convention & EXPO. Should you need assistance during the convention, do not hesitate to ask one of the following:

ASC Board of Directors Chair

C. Russell Thompson

President & CEO Evans Adhesive Corporation, Ltd. Treasurer

Andrew Johnston

Vice President, Adhesives Ashland Performance Materials

Robert Marquette President Bostik, Inc.

John McLaughlin President and CEO DAP Inc.

John Meccia

Past Chair

Vice President, Paper Converting Henkel Corporation

Glenn Frommer

Steven Meenan

President ADCO Products, Inc. Directors

Christine Bryant

Business Unit Director 3M Industrial Adhesives & Tapes Division

Lawrence Owen

Vice President, Regional Key Accounts, Distribution Sales & Marketing Bayer MaterialScience, LLC

Senior Vice President Franklin International

Philip Byers

President The Reynolds Company

Business Director Eastman Chemical Company

Gary Delzell

Director, Supply Management Bostik, Inc.

Gerhard Haas

Vice President, Research and Development, Technical Service, Purchasing Jowat Corporation

Stephen Harms

Senior Vice President of Business Development Management Sika Corporation

Traci Jensen

Vice President, NA Adhesives H.B. Fuller

Kenneth Lauffer

Business Unit Director â&#x20AC;&#x201C; Adhesives Arizona Chemical Company

Lex Reynolds

Mark Schneider

President Albion Engineering Company

Mark Siebert

Vice President & General Manager Kraton Polymers U.S. LLC

Christopher Stevens

Vice President & General Manager ITW Polymers NA Adhesives

Christopher Urheim

North American Commercial Director, Adhesives & Functional Materials Dow Chemical Company

Charles Williams, Jr.

Principal Scientist Avery Dennison Performance Polymers

Matthew Croson, Ex-Officio Member

President Adhesive and Sealant Council

ASC Onsite Staff Malinda Armstrong

Senior Manager, Meetings & Tradeshows

Jessica Carter

Online Communications Manager

Mark Collatz

Director, Regulatory Affairs

Matt Croson President

Steve Duren

Senior Director, Member Services

Nick Mancusi

Education Program Manager

Mike Socha

KDG Advertising & Marketing

Kate Zando

Director, Finance & Administration

1 2013 Spring Convention and EXPO Final Program

ASC would like to recognize the generous support of our sponsors! As you interact with them throughout the event, please personally thank them for their continued support of ASC and the industry.

2013 Spring Convention Sponsors Business Development & Market Trends Education Session – Tuesday AM

Water Station

Fun Run/Walk & Notepads

Final Program

Business Development & Market Trends Education Session – Monday PM

Technical & Governmental Regulations Education Session – Tuesday AM

New Technology & Application Education Session – Tuesday AM

New Technology & Application Education Session – Monday PM

iPad Raffles – Booth 215 EXPO Reception iPad Raffle – Booth 405 & 407 Technical & Governmental Regulations Education Session – Monday AM New Technology & Application Education Session – Tuesday PM

Tuesday Closing Reception Convention T-shirts Business Development & Market Trends Education Session – Tuesday AM

Attendee Tote Bags

Coffee Lounges Kindle Fire Raffles – Booth 401 & 403

New Technology & Application Education Session – Monday AM

Technical & Governmental Regulations Education Session – Monday PM

Wireless Internet Convention Marketing

Registration Packet Handout

Monday Opening General Session Breakfast

Technical & Governmental Regulations Education Session – Tuesday PM

Hotel Keycards Business Development & Market Trends Education Session – Monday AM

Lanyards, Hotel Room Drop, & Convention Promotional E-mails

2013 Spring Convention and EXPO Final Program 2

Final Program Contents:

ASC Board of Directors and Onsite Staff................................... 1 ASC’s Sponsors........................................................................... 2 General Convention Information............................................... 3 Daily Program and Newest Members......................................... 4 Speaker Biographies.................................................................. 23 Schedule at a Glance................................................................. 38

Registration/Information Hours Centennial Ballroom Foyer, Ballroom Level (LL1) Sunday, April 21 Monday, April 22 Tuesday, April 23

7:00 a.m. – 7:30 p.m. 6:30 a.m. – 6:00 p.m. 6:30 a.m. – 5:00 p.m.

Speaker Ready Room

Kennesaw, Atlanta Conference Center (LL3) AVPG is the audio visual needs provider. Speakers may prepare for and/or make changes to their presentations in the Speaker Ready Room. Check with the ASC staff at the Registration Desk if audio/ visual technicians are unavailable to assist you.

Coffee Lounges

Sponsored by:

Learn more at www.emeraldmaterials.com

7:30 a.m. – 3:30 p.m. Polyurethane Short Course (registrants only) Piedmont, Atlanta Conference Center (LL3)

Morning Education Sessions 9:15 a.m. - Noon Education Track 1: Business Development and Market Trends

Raw Materials Focus Dunwoody, Atlanta Conference Center (LL3)

Sponsored by:

9:15 to 10:00 a.m. Emerging Raw Material Supply from China Nellie Perry, Vice President, C5 Monomers and Polymers, Argus DeWitt For years, North America has had an abundance of raw materials. With advent of shale gas there has been a significant reduction in feed supply to make the polymers of interest in the adhesive industry. The significance of the reduction has been masked by various economic downturns, but in general has raised the costs of raw materials. If and when, normal demand growth returns we would expect there to be supply problems. This presentation puts in perspective the feed situation in North America versus Asia and opportunities for new hydrocarbon resin supply from Asia. 5 2013 Spring Convention and EXPO Final Program

Daily Program 10:00 to 10:30 a.m. BREAK 10:30 to 11:15 a.m. Tackifiers from China

Jeffery Li Zhen, Vice President/Deputy General Manager, Jinhai Deqi Chemical China’s expanding ethylene supply creates opportunities to recover monomers of interest to adhesive producers. This presentation will clearly show the quality evolution of tackifier products from Asia and how they can meet the needs of adhesive industry in North America. It will also provide some perspective on the new tackifier production capacity; available grade slates; and a property comparison versus urrent industry standards.

11:15 a.m. to Noon

The Impact of the Central Banks Stimulus Programmes on Oil Markets Paul Hodges, Chairman, International eChem This presentation will discuss how the traditional price discovery role is currently broken in crude oil markets; how oil supply is increasing whilst demand is slowing and inventories are comfortable; how stimulus programs have led to fears of higher inflation and a weakened dollar; how financial investors now dominate oil markets and see oil as a ‘store of value’; and how market volatility could rise when investors rediscover supply/demand fundamentals.

Education Track 2: Technical and Government Regulations

Formulation & Technical Focus Courtland, Atlanta Conference Center (LL3)

Sponsored by:

9:15 to 10:00 a.m.

Dibenzoate Plasticizers’ Use in Sealants: Polysulphide 2K Insulating Glass and Silyl Terminated Polyether Sealants Bill Arendt, Research Fellow, Emerald Kalama Chemical LLC Dibenzoate plasticizers have a long history of use in the adhesives industry. Diethylene glycol dibenzoate with dipropylene glycol dibenzoate traditional and modern blends are plasticizers of choice in waterborne adhesives. However, dibenzoates have also been and are currently used in the latex caulk industry, most recently as new dibenzoate blends tailored to that application. In addition to those applications, dibenzoate plasticizers are finding increased use in polysulphide 2K insulating glass sealants, primarily in the “A” side or polymer side of the sealant. A study on formulation with new DEG/DPG dibenzoate blends has been conducted to illustrate how to use these new blends in that application. The results of that work will be presented. Silyl terminated polyether sealants as a class of sealant continues to grow. Classically, phthalates such as diisononyl and other long chain phthalates have been used in silyl terminated polyether sealants. In addition, the selection and use of dibenzoates will be explored as replacements for phthalates. These data will also be presented. 2013 Spring Convention and EXPO Final Program 6

10:00 to 10:30 a.m. BREAK 10:30 to 11:00 a.m.

Using Superior Dispersion and Surface Chemistry of Fumed Silica to Improve Adhesive Performance Michael Famiglietti, Technical Service Manager, Cabot Corporation In adhesive systems fumed silica particles are commonly used to enhance rheological as well as mechanical properties. These performance benefits are achieved by virtue of the silica networks that form in specific polymer matrices. A discussion of dispersion state and surface chemistry will highlight examples of how improved performance in adhesive systems is achieved. The superior state of colloidal scale silica dispersions provides improved mechanical properties of pressure sensitive adhesives. Additionally, paring the particleâ&#x20AC;&#x2122;s surface chemistry to specific polymers in adhesive systems will lead to improved rheological performance, including increased yield stress and stability. The ability to control these properties can be leveraged to enhance performance in wide array of adhesive systems.

11:00 to 11:30 a.m.

Multi-arm Copolymers for PSA Optimization Alejandro Esquivel, Technical Service Engineer, Dynasol, LLC One of the main concerns for pressure sensitive adhesive formulator is reduce formula and operative costs maintaining or improving adhesive performance. Dynasol has developed a new polymer family based on a novel multi-arm structure specifically designed for adhesives application. Attendees will comprehend how to obtain superior benefits: improve adhesive performance; substitute SIS formulations using multi-arm based formulas; reduce costs using less polymer and /or tackifier maintaining performance; improve process productivity maintaining adhesive performance and energy saving.

11:30 a.m. to Noon

Getting More for Less - New Bio-Based Rheological Additives for Low Temperature Process Mark Piggott, Senior Account Manager, Arkema Coating Resins Recently, a new generation of thixotropic amides (Crayvallac SLT) has come onto to the sealant market. It reduces cost and cycle times and also improves reliability and rheological performance. More than 90 % of its ingredients are bio-sourced and bio-renewable. It is also 100 % solid and therefore VOC free. Furthermore, this development will enable formulators to produce sealants at lower temperatures (cold process), thus reducing energy consumption and cycle time and leading to lower manufacturing costs.

Education Track 3:

New Technology and Application

Mechanical Fasteners vs. Adhesives Focus Baker, Atlanta Conference Center (LL3)

7 2013 Spring Convention and EXPO Final Program

Sponsored by:

Monday – Daily Program 9:15 to 10:00 a.m.

Will Adhesive Bonding Ever Replace Mechanical Fastening? Dave Nick, President/CEO, DPNA International, Inc. This presentation will describe the current status of adhesives as an alternative to mechanical fastening. The opportunities for chemical (adhesive) bonding have been reported as “boundless” starting in the 1990’s. Chemical bonding methods were touted as the wave of the future, replacing labor intensive and costly welds, screws, nuts and bolts, stitching and tabs for fabricating many components. Today, adhesives have gained market share and are well positioned in many industry segments. Most notable are transportation (aircraft and autos), construction, (flooring, wall panels), woodworking and other assembly sub-segments. Nearly 13% of the $324 billion global fastening market is shared by adhesives and it is increasing. Segment market share gains for adhesive bonding will be identified along with comments on key market drivers, strengths and weaknesses. Concluding comments will be offered on the future outlook for both adhesive bonding and mechanical fastening.

10:00 to 10:30 a.m. BREAK 10:30 to 11:15 a.m.

Trends and Future Prospects in Materials Joining Technologies George Ritter, Principal Engineer, Materials, Edison Welding Institute (EWI) Mechanical fasteners and welds have the reputation of reliability and repeatability. Adhesives are seen as slow to process and having unpredictable performance. With the advent of new dissimilar materials combinations, what are the prospects for structural bonding and how will adhesives be used? EWI develops multi-disciplinary approaches to materials joining solutions for manufacturing industry. Dr. Ritter leads the adhesives bonding area and will discuss the technical merits of adhesives, welding, and opportunities for combining adhesives with other joining techniques. He will offer perspective on manufacturing cultures and barriers to success and suggest those areas where adhesive bonding might be expected to compete with or augment traditional manufacturing approaches.

11:15 a.m. to Noon

Lean Manufacturing with Structural Adhesives Jeff Moser, Business Development Manager - Bonding Solutions, A.RAYMOND TINNERMAN INDUSTRIAL, Inc. A major obstacle to structural adhesive penetration in high volume production environments (i.e. automotive etc.) cure time. 2K adhesives offer accelerated curing at the expense of complex mixing and dispensing systems while 1K adhesives require extended cure times during which the substrates must be stored while clamped or fixed together. Hot melts and PSA tapes are often used at additional cost to hold bonded parts together while wet structural adhesives cure. To match TAKT times and line speeds with traditional fastening methods a rapid green strength cure is required. Structural adhesives with rapid curing strength for in-line secondary assembly operations and non-destructive end of line testing have been successfully commercialized in high volume production. This presentation will review key economic drivers for this process including capital, WIP, scrap, and productivity.

2013 Spring Convention and EXPO Final Program 8

Noon – 1:00 p.m. LUNCH ON YOUR OWN Meet with a colleague or take time to get some fresh air and explore downtown Atlanta. Below are a few options available to you for a business lunch meeting or just some quiet time: Sway Restaurant Atlanta - Featuring three chef-driven menus, Sway is a restaurant unique to the Hyatt Regency Atlanta. Whether joining us for breakfast, lunch or dinner, patrons will find not only a Southern influenced dining experience Market – Located in the hotel lobby the Market serves an impressive, innovative selfservice concept 24-hours-a-day. Items for purchase include Savannah Honey, Atlanta Fresh Greek Yogurt and High Road Ice Cream. With a wood-fired pizza oven, guests can enjoy hot, fresh flat bread pizzas, chicken-pot pies, southern-style mac ‘n cheese, and more! Twenty-Two Storys Atlanta - Twenty-Two Storys bar was designed to communicate colorful history and ‘stories’ of Hyatt Regency Atlanta and features our unique beer influenced menu from local Atlanta and Georgia breweries!

Noon – 1:00 p.m. CEO LUNCH (invitation only)

Greenbriar, Atlanta Conference Center (LL3)

Afternoon Education Sessions 1:00 a.m. - 4:30 p.m. Education Track 1: Business Development and Market Trends

Mergers & Acquisitions Focus Dunwoody, Atlanta Conference Center (LL3)

Sponsored by:

1:15 to 2:00 p.m.

M&A Drivers in the Adhesives and Sealants Value Chain John Beagle, Managing Director, Grace Matthews Inc. Merger and acquisition activity continues at a robust pace in the adhesives and sealant value chain. Mr. Beagle will discuss his thoughts on why buyers buy, why sellers sell, and what we can expect looking forward. The presentation will provide a balanced view of transaction drivers from the perspective of entrepreneurial and family business, private equity groups and their holdings, as well as large, global adhesives, sealant, and chemical companies.

2:00 to 2:45 p.m.

A Profile of Who is Buying; Who is Selling and What Trends will Drive the Future & What is Attractive for Private Equity John Televantos, Partner, Arsenal Capital Partners The adhesives and sealants sector is an attractive market for strategic and private equity investors. Strong, consistent free cash flow generation, low capital expenditure requirements, and a large fragmented landscape with diverse end markets are fundamental drivers of the sector. Additionally, continuous innovation and a need for strong customer intimacy to address evolving end-market requirements make the market an attract place for investment. Key trends in the adhesives and sealants market that will drive higher-than-average GDP are the evolving 9 2013 Spring Convention and EXPO Final Program

Monday – Daily Program construction and automotive end-markets shifting away from traditional mechanical fasteners (e.g., screws and nails) and towards structural adhesives, and a trend towards lower VOC technologies. We will present recent statistics of transactions and trends in M&A.

2:45 to 3:00 p.m. BREAK 3:00 to 3:45 p.m.

A Look at Valuation Techniques David Duke, Managing Director, Cary Street Partners Industrials Investment Banking The presentation explores the two complementary methodologies most investment banks employ when providing guidance on the valuation to a privately held company for purposes of estimating ultimate purchase price the market will bear. This discussion will emphasize techniques used for M&A purposes, not for estate or tax planning purposes.

3:45 to 4:30 p.m.

Best Practices in Post-Merger Integration Patrick Trippel, Senior Vice President Construction Materials, H.B. Fuller The presentation will provide a roadmap and insights for companies and individuals on both sides of the acquisition process - the acquiring, and the acquired. Those attending will gain insight into how to supporting a speedy and smooth integration and foster momentum; promote productivity and encourage a “business as usual” environment; engage highpotential employees during the process; inspire investor confidence; and cultivate relationships with customers and suppliers.

Education Track 2: Technical and Government Regulations

Regulatory Affairs Focus Courtland, Atlanta Conference Center (LL3)

Sponsored by:

1:15 to 1:45 p.m.

Green Globes New Construction the Next Generation Erin Shaffer, VP Federal Outreach, Green Building Initiative Participants will understand the four-path approach to measure and rate energy performance for the design and construction of new commercial buildings within the Green Globes voluntary rating and certification program. Pathways include: Energy Star – Target Finder which benchmarks a proposed design energy intensity against actual performance data; the ASHRAE Building Performance Method which is the standard for the industry, and is applicable for non–Energy Star label building types; the ANSI/GBI 01-2010 Energy Performance Building Carbon Dioxide Equivalent Emissions (CO2e) protocol which is a new, cutting edge methodology based on CO2e units and the ASHRAE Building Energy Quotient program which adopts an integrated analysis of the building’s features and operability to predict a new building’s future energy performance. Other upgraded sustainability protocols such as water, indoor air environment and site will be explored in depth. 2013 Spring Convention and EXPO Final Program 10

1:45 to 2:30 p.m.

LEED V.4- Update on the Impact on Sealants and Adhesives Michael Schmeida, Divisional Manager-Sustainability & Government/Regulatory Affairs, Tremco Incorporated As discussed in the presentation entitled “LEED 4.0: Potential Impacts on Construction Chemical Manufacturers” presented at the ASC 2012 Fall Convention, LEED™ V.4 is going to the next level in sustainability concepts and construction materials. Life-cycle terminology and practices, product and chemical assessments and supply chain management will become greater topics of interest. We will re-examine these and other areas of great concern to the adhesives and sealants industry in the latest draft version of LEED V.4 and discuss what the latest proposals may mean for organizations as this now mainstream design system makes significant changes. We will also solicit stakeholder feedback so that ASC may better prepare how it handles this issue on member organizations’ behalf.

2:30 to 2:45 p.m. BREAK 2:45 to 3:30 p.m.

GreenSuite® Alternative Assessments of Chemicals, Products, and Processes George Thompson, President & CEO, Chemical Compliance Systems, Inc. Alternative assessments can be based upon the hazard, risk, lifecycle, or sustainability impact of a chemical substance by itself, within its manufacturing process, or from the product containing the chemical. The complexities involved with these alternative assessments cannot be credibly fulfilled by a single system, such as GreenScreen®. In addition, since alternative assessments are intended to “eliminate or reduce potential exposures” to chemicals of concern, banning chemicals is not the only available option, especially when exposures can be reduced or eliminated by other means. GreenSuite® is a set of existing software modules populated with chemical and regulatory data that identify the hazards of chemicals and their risks within a manufacturing process, or a finished product, so exposures can be maintained at safe levels within each stage of the lifecycle, as well as across the entire lifecycle, thus avoiding the need to ban the chemical. GreenSuite® utilizes 44 ecological, health, and safety endpoint criteria from the national “Greener Chemicals and Processes Information Standard” (ANSI 355) to quantitate the hazards and risks on a scale of 0-100%. Comparative analyses for alternative chemicals, manufacturing processes, or product formulations can be completed within 3-5 seconds.

3:30 to 4:00 p.m.

New Technologies for Rapid Assessment of Adhesive and Sealant Chemical Impacts Stephany Mason, Vice President, VOC Materials Testing, Eurofins Air Toxics, Inc. This presentation will introduce new technologies to help manufacturers measure the VOC emissions IAQ impact of their products. In addition, the presentation will facilitate a dialogue into how these technologies can be useful throughout a product’s lifecycle: product concept, research and development, market introduction, and production verification.

11 2013 Spring Convention and EXPO Final Program

Monday – Daily Program Education Track 3:

New Technology and Application

Trends in Life Cycle Assessment & EPDs/PCRs Focus Baker, Atlanta Conference Center (LL3)

Sponsored by:

1:15 to 2:00 p.m.

EPD 101: What, Why and How Wayne Trusty, President, Wayne B. Trusty & Associates Limited This presentation focuses on the what, why and how of an Environmental Product Declaration (EPD). Since EPDs are based on Life Cycle Assessment (LCA), the presentation will first focus on an overview of the essence of LCA – terms, standards, basic steps, and the environmental performance measures that result. We will then shift to the basic steps in developing an EPD, which start with the development of Product Category Rules (PCR) under the direction of a Program Operator, and end with verification and publication of the EPD. Finally, we’ll focus on the types of EPDs that can result and the bottom line for industry – the critical ‘why’ question.

2:00 to 2:45 p.m.

Key Learning’s from the Door and Hardware Industry on Product Transparency Aaron Smith, Director of Sustainability, ASSA ABLOY Door Security Solutions® This presentation will discuss the experience of product transparency from the point of view of the largest global manufacturer of doors, hardware and access control products. PCRs, LCAs, EPDs and HPDs.

2:45 to 3:00 p.m. BREAK 3:00 to 4:00p.m.

Importance of Service Life Prediction Metric in PCR Development for Sealants Christopher White, Acting Group Leader, Polymeric Materials Group, National Institute of Standards and Technology Developing a Product Category Rule (PCR) for one or more products involves providing a life cycle assessment. The life cycle assessment provides a detailed analysis of the environmental impact of the product across its life span from cradle to grave. Most of the inputs can reliably be determined. A critical component that can have a dramatic impact on the LCA and thus the PCR is the prediction of the service life. This presentation will detail specific examples where subtle changes in the expected lifetime of a product can have unexpected impacts on the environmental life cycle assessment. Following these examples, current methods of assessing the service life of polymeric building materials will be reviewed. 2013 Spring Convention and EXPO Final Program 12

4:00 â&#x20AC;&#x201C; 7:00 p.m. ASC EXPO and reception Centennial Ballroom II & III, Ballroom Level (LL1) The ASC EXPO represents a critical opportunity to help you stay at the forefront of innovation and competitiveness! This exclusive networking opportunity allows you to interact one-on-one with colleagues, exchange information on the latest developments in the industry, win some of the terrific prizes in the EXPO raffle and mingle during the reception, which begins at 6:00 p.m. For a complete list of exhibitors including the 19 new companies, see the 2013 Spring EXPO Guide.

EXPO Raffle Prize Sponsors:

Apple iPad Booth 215

Kindle Fire Booths 401 & 403

13 2013 Spring Convention and EXPO Final Program

Apple iPad Booths 405 & 407

Daily Program

7:30 – 9:00 a.m. GENERAL BREAKFAST & KEYNOTE Centennial Ballroom I, Ballroom Level (LL1) Entropic Control in Materials Design as an Example of Green Chemistry John Warner, President and Chief Technology Officer, Warner Babcock Institute for Green Chemistry, LLC The traditional construction of materials is usually driven by classical synthetic transformations involving the making and breaking of covalent bonds. These processes often require high energy input and highly reactive and hazardous materials. In natural systems, one typically encounters synthetic control schemes that are based on entropic forces rather than these humandesigned enthalpic manipulations. In natural processes, phase changes and triggered mixing are often employed to direct systems towards or away from equilibrium conditions. The recognition of these “natural tendencies” allows one to design processes that have reduced toxicological and environmental impact. This presentation will describe results in non-covalent derivatization and bioinspired photopolymers that illustrate this shift towards entropic control as an example of green chemistry.

Morning Education Sessions 9:15 a.m. - Noon Education Track 1: Business Development and Market Trends

Trends in Green Chemistry Focus Dunwoody, Atlanta Conference Center (LL3)

Sponsored by:

9:15 to 10:00 a.m.

Trends in Green Chemistry & Business Impacts David Constable, Director, ACS Green Chemistry Institute Sustainable and green chemistry is a rapidly growing initiative in industry as companies grapple with increased regulatory requirements, supply constraints, and consumer pressure for greener products. This presentation will discuss how a pragmatic and systematic approach to sustainable and green chemistry in the early design of new and re-formulated products and processes can spur innovation while minimizing these risks.

10:00 to 10:15 a.m. BREAK 2013 Spring Convention and EXPO Final Program 14

10:15 to 11:15 a.m.

Enabling Downstream Sustainability through Adhesives Design Hassan Rmaile, Chief Innovation and Technology Officer, H.B. Fuller This presentation will share some of the examples of new products from H.B. Fuller that are enabling products in that direction. We focus on enabling sustainability by developing adhesives for manufacturing filters that enable cleaner water and air, formulating window adhesives and sealants that help prevent energy loss – for today’s demanding building needs, focusing on the performance of our adhesives to ensure the end product meets our customers’ requirements with regard to specification, durability, functionality, and the use of green biobased recycled materials when they allow us to meet the cost-in-use and performance demands of our target markets and consumers.

11:15 a.m. to noon

Green Chemistry Opportunities in Sustainable Adhesives and Polymer Composites Richard Wool, Professor of Chemical and Biomolecular Engineering, University of Delaware This presentation will discuss recent advances in the development of the next generation of sustainable composite resins, adhesives and polymer materials from renewable resources. A strategy for the sustainable design of non-toxic high performance materials as replacements for PS, PVC, PC, PUR (foam), VE resins, adhesives and sealants is presented. Examples are given which show how green chemistry and engineering can be used successfully in a new billion dollar market.

Education Track 2: Technical and Government Regulations

Technical Trends in Polyurethane and Alternate Solutions Courtland, Atlanta Conference Center (LL3)

Sponsored by:

9:15 to 10:00 a.m.

Faster Curing and Higher Strength Applications with New Silane Terminated Polyether Product Technology Calvin Shen, Sr. Technical & Market Development Manager, Kaneka North America LLC The STPe technology is known to have excellent durability with balanced product performance and ease of manufacturing. It has being recognized as the greener and safer product chemistry of choice to address some of the environmental regulations. The new STPe products are designed to broaden product offering from current elastic and flexible silane terminated polyether to meet different sets of performance requirements particularly in faster curing and higher strength applications. Additional feature on the new products is that the shelf stability not being compromised for faster reactivity. Detailed results will be discussed in the presentation.

15 2013 Spring Convention and EXPO Final Program

Tuesday – Daily Program 10:00 to 10:30 a.m.

VOC Free, High Performance PU Adhesives for CO2 Based Polycarbonate Polyols Jason Anderson, Director, CO2 Strategy & Business Development, Novomer, Inc. Novomer and The Hanson Group are developing a novel two-component urethane adhesive based on Novomer’s CO2-based polycarbonate polyol technology. This zero VOC, high strength system is targeted at flexible textile and footwear applications. Novomer and Hanson will continue to refine the technology in collaboration with major adhesive end users.

10:30 to 11:15 a.m.

Benefits of Aliphatic Diisocyanates (ADI) and their Derivatives in Thermoplastic Materials Corey King, Manager, Technical Service and Business Development, Crosslinkers, Evonik Corporation In the presentation we will discuss how the structure and selectivity of an aliphatic diisocyanate determines physical properties of the finished product including crystallinity, compatibility, glass transition temperature and viscosity. It will also help selecting which aliphatic diisocyanate will best suit a specific application. Based on this knowledge, it can be concluded that H12MDI is the most suitable aliphatic diisocyanate monomer for thermoplastic polyurethanes. It should be noted however that changing from MDI to H12MDI will require raw material reformulation in order to reach the same mechanical properties of the original aromatic TPU. As an example for an application of aliphatic diisocyanates derivative, we will discuss the stabilization of polyesters by aliphatic polycarbodiimides.

11:15 a.m. to Noon

Novel Moisture Curable Silane Modified Polymers Kamesh Vyakaranam, Associate Scientist, Dow Chemical Company Dow VORASIL™ Silane Modified Polymers (SMP) is a family of moisture-curable isocyanate-free polymers. The inherent flexibility of the backbones makes VORASIL™ SMP products ideal candidates for adhesive and sealant applications. Being isocyanate-free, these products offer handling advantages over conventional polyurethane sealant and adhesive resins. Dow VORASIL™ products offer fast ambient cure, good compression sets, and low viscosity for easy processing and formulation latitude. The current Dow VORASIL™ family comprises two products: VORASIL™ 602, a low modulus, high elongation resin; and VORASIL™ 604, a medium modulus resin. These products can be used alone or in combination in adhesive and sealant applications.

2013 Spring Convention and EXPO Final Program 16

Education Track 3:

New Technology and Application

Advanced Technology Link Focus Baker, Atlanta Conference Center (LL3)

Sponsored by:

9:15 to 10:00 a.m.

Looking Beyond Fibrils: Evolution Guided Polymer Adhesion Alfred Crosby, Professor, Department of Polymer Science and Engineering, University of Massachusetts Amherst Nature provides awe-inspiring lessons in designing materials structures from simple building blocks to achieve necessary performance. A ubiquitous theme is the establishment of structures that have unique mechanical responses at different length scales, ranging from nanometers to centimeters. We describe how the same balance of materials properties and geometry that control draping in a thin film can be advantageous for the hierarchical design of reversible, gecko-inspired adhesives. We develop a simple scaling theory to link the adhesive performance of features on nanometer lengths to climbing systems of macroscopic dimension. We have used the guidance provided by this scaling theory to develop Geckskinâ&#x201E;˘ adhesive systems, which are capable of supporting up to 700lbs on an index card sized sample and removed with near-zero forces upon command.

10:00 to 10:15 a.m. BREAK 10:15 to 10:45 a.m.

A Catechol-Based Intravascular Adhesive That Coats and Treats Atherosclerotic Plaques Christian Kastrup, Assistant Professor, University of British Columbia Developing therapies that locally treat atherosclerotic plaques and other segments of diseased vessels is an important goal for preventing heart attack and stroke. Current clinical techniques for implanting drugeluting devices, such as stenting, rely on mechanical forces to implant materials in vessels, which can permanently damage the vessel. We have developed an intravascular bioadhesive gel that can be locally and durably glued onto the inside surface of blood vessels. In arteries of mice, the gel, delivered via catheter, adhered for over a month and controllably released small molecules into the local vasculature. In a model of atherosclerosis, inflamed plaques treated with steroid-eluting adhesive gels had reduced inflammation and had protective fibrous caps covering the plaque core.

17 2013 Spring Convention and EXPO Final Program

Tuesday – Daily Program 10:45 to 11:30 a.m.

Viscoelastic Silicone Rubber as a Closure Adhesive and Adaptive Sealant Louis Bloomfield, Professor and Associate Chair of Physics, University of Virginia Viscoelastic silicone rubber is a new thermoset polymer that is firm and springy on short timescales yet soft and compliant on long timescales. Its time-dependent behavior makes it uniquely suited to use in adaptive padding and sealing. Its dynamic molecular structure also gives it the ability to adhere strongly but temporarily to itself, while showing little or no adhesion to anything else. That strong, temporary adhesion allows viscoelastic silicone rubber to act as an adhesive for packages that requires both secure closure and repeated opening and closing cycles without damage.

11:30 a.m. to Noon

Transfer Printing Nanowire Electronic Devices on Non-Si Substrates Xiaolin Zheng, Assistant Professor, Stanford University This presentation will discuss various transfer printing methods that can fabricate electronic devices onto diverse nonconventional substrates, such as paper, plastics, tapes, glasses, polydimethylsiloxane, Al foils, and polymer substrates. These flexible, transparent, ultrathin, or biocompatible devices will impact many technologies, such as flexible displays, solar cells, and biosensors. This presentation will highlight a simple, versatile, and wafer-scale water-assisted transfer printing method (WTP) that enables integration of electronic devices onto diverse non-Si substrates which were not easily accessible before. The WTP method relies on the water assisted subcritical interface debonding mechanism. The transfer yield is nearly 100%, and the transferred devices maintain their original geometries and electronic properties with high fidelity.

Noon – 1:15 p.m. TUESDAY GENERAL SESSION LUNCH & KEYNOTE Centennial Ballroom I, Ballroom Level (LL1) Chemical Safety Jim Jones, Acting Assistant Administrator, U.S. Environmental Protection Agency Jim Jones, Acting Assistant Administrator of the EPA’s Office of Chemical Safety and Pollution Prevention, will discuss recent actions the agency and stakeholders have taken to improve chemical safety, increase public knowledge about chemicals, transition to alternative and smarter chemicals, and to integrate pollution prevention methods in chemical development and manufacture. Jim will also offer his perspective on future developments in chemical safety, and highlight upcoming activities, chemical information releases, and opportunities for stakeholders to become more involved.

2013 Spring Convention and EXPO Final Program 18

1:30 to 2:30 p.m. ASC Committee Meetings (concurrent) n Technical Committee Meeting (committee members only)

Vinnings, Atlanta Conference Center (LL3)

nM arketing Committee Meeting (committee members only)

Fairlie, Atlanta Conference Center (LL3)

nM embership Committee Meeting (committee members only)

Greenbriar, Atlanta Conference Center (LL3)

nG lobal Resource Committee Meeting (committee members only)

Spring, Atlanta Conference Center (LL3)

nR egulatory Affairs Committee Meeting (committee members only)

Edgewood, Atlanta Conference Center (LL3)

Afternoon Education Sessions 2:45 to 4:45 p.m. Education Track 1: Business Development and Market Trends

Trends & Opportunities for Packaging Solutions Focus Dunwoody, Atlanta Conference Center (LL3)

Sponsored by:

2:45 to 3:15 p.m.

Sustainability and VOC Free Polyurethanes Ram Ramalingam, Technical Director, Henkel Corporation Concern for the environment combined with cost, convenience and product safety complete the list of major contributing factors propelling new package design. Global adhesive companies are meeting these challenges with innovative state of the art adhesives and coatings. Polyurethanes that are VOC free and use renewable raw materials offer many sustainable solutions.

3:15 to 3:45 p.m.

Game-changing Trends in the Packaging Market Jeffrey Timm, Managing Principal, Timm Consulting With renewed global attention of sustainability and environmental issues, the packaging market is embracing the dynamic change needed to meet these future challenges. Packaging is the connection between consumers and brands so the burden to deliver is much more than simply protecting the contents. Game-changing disruptive trends will be explored. 19 2013 Spring Convention and EXPO Final Program

Tuesday â&#x20AC;&#x201C; Daily Program 3:45 to 4:15 p.m.

Flexible Packaging Solutions for Chemical Manufacturers Iris Thomas, Cheertainer Bag-In-Box Product Manager, CDF Corporation This presentation is an overview of flexible packaging solutions used in the chemical industry. Learn about the different types of in-process manufacturing packaging and why to choose one product over another. Preview the latest packaging innovations.

4:15 to 4:45 p.m.

Optimizing Packaging Solutions for Todayâ&#x20AC;&#x2122;s War Fighter Kevin Smith, HQMC, Installations & Logistics, (LPS), Logistics Plans, Policies, and Strategic Mobility Branch (South) This presentation will highlight tips for improving packaging protection, reducing materials used, and optimizing packaging design to save cost throughout the logistics chain from acquisition to disposal for the war fighters success.

Education Track 2: Technical and Government Regulations

Regulatory Affairs Focus Courtland, Atlanta Conference Center (LL3)

Sponsored by:

2:45 to 3:15 p.m.

South Coast Air Quality Management District Revision of Rule 1168 Update Mark Collatz, Director, Regulatory Affairs, Adhesive and Sealant Council This presentation will update the activities of the South Coast Air Quality Management District in developing revisions to the Rule 1168, the regulation addressing VOC limits for commercial adhesives and sealants in the Los Angeles area.

3:15 to 4:00 p.m.

TSCA Reform Legislation Mark Duvall, Principal, Beveridge & Diamond, P.C. Congress is now actively considering overhaul of the Toxic Substances Control Act. TSCA was enacted over 36 years ago and has long been considered to be in need of revision. How and when the statute will be changed will impact all chemical manufacturers and processors. In this session, hear the latest on the key proposals, areas of legislative agreement and disagreement, and prospects for passage.

2013 Spring Convention and EXPO Final Program 20

4:00 to 4:30 p.m.

California’s Safer Consumer Products Rules Mark Duvall, Principal, Beveridge & Diamond, P.C. California’s Green Chemistry law mandates the adoption of regulations to identify and prioritize chemicals in consumer products for consideration as chemicals of concern and potential regulation or bans. Once adopted, these state rules will impact consumer products and their ingredients throughout the nation. With the final rules already over a year overdue, the California Department of Toxic Substances Control has released a near-final draft. This session will identify the key provisions, explain how they differ from previous drafts, and clarify how the rules will impact chemical suppliers across the country.

Education Track 3:

New Technology and Application

Advanced Technology Link Focus Baker, Atlanta Conference Center (LL3)

Sponsored by:

2:45 to 3:30 p.m.

Nanocrystalline Cellulose (NCC) – Properties and Applications Martin Feng, Principal Scientist, FPInnovations Wood Products Division Nanocrystalline Cellulose is a renewable, recyclable and abundant nanomaterial made of cellulose fibers from the wood pulp manufacturing process. The unique properties of this material will provide new opportunities in a wide range of applications for a variety of sectors such as the aerospace, automotive, chemical, textile and forest industries. Potential applications include optically-reflective films, high-performance adhesives, durable vanish and innovative bioplastics. This presentation will introduce the unique properties of NCC and some of its applications.

3:30 to 4:15 p.m.

Poly Lactic Acid-Based Green Hot Melt Adhesive Alexander Bakken, Research Assistant, Purdue Nuclear Engineering The PLATech eco-friendly biodegradable adhesive-coating ionizing particle tailored technology has been developed to offer unique advantages and benefits such as: tailored bonding strength as good as or over 100% higher than from state-of-art; rapid functionality within seconds to minutes; for joining disparate surfaces without surface preparation and remaining VOC-free environmentally responsible. The presentation will cover the underlying science and details of experimental validation and comparisons.

21 2013 Spring Convention and EXPO Final Program

Tuesday – Daily Program 4:15 to 4:45 p.m.

Selectivity of Adhesion and Control of Friction by Near-Surface Patterning Ying (Richard) Bai, PhD Candidate, Lehigh University We have studied how near-surface patterning of shape and elasticity can be used to endow generic materials with properties such as adhesion selectivity and controlled friction. First, we show that by using periodic and complementary surface profiles, highly enhanced and selective adhesion can be obtained between two surfaces. Second, we show how a surface patterned with periodic variation in stiffness undergoes an “autoroughening” transition during friction and that this process can strongly attenuate overall sliding friction.

5:00 – 6:00 p.m.

CLOSING SESSION

Dunwoody, Atlanta Conference Center (LL3) How Long Should It Last? Sealant Durability as a Factor in Construction Litigation David Nicastro, Chief Executive Officer, Building Diagnostics Sealant is used on every building, and used wrong on most of them. From product selection to installation to maintenance, ignorance about exterior wall and window sealant joints leads to countless premature failures; therefore, durability is a central factor in construction litigation. In many cases, there are unrealistic expectations of how long a sealant should serve its intended purpose - its design life. On the other side, mistakes shorten the sealant’s functional performance - its service life. To bridge this knowledge gap, this presentation will synthesize a practical understanding of sealant durability based on theoretical behavior, observations from numerous failure case studies, and research and test results from The Durability Lab. Improving durability is also closely related to sustainability; preventing premature failure keeps building materials out of the landfill longer.

6:00 – 7:00 p.m. Petro Canada

Sponsored by:

Closing Reception

Courtland, Atlanta Conference Center (LL3)

2013 Spring Convention and EXPO Final Program 22

Jason Anderson Director, CO2 Strategy & Business Development, Novomer, Inc.

Jason Anderson is Director of Business Development for Novomer’s CO2 technology platform, where he leads efforts to commercialize CO2-based polycarbonate polyols in a range of thermoset chemistry applications including adhesives, coatings, foams and elastomers. Prior to Novomer, Jason held management roles at McKinsey & Company and BASF Corporation. Jason has a B.S. in Chemical Engineering from The University of Oklahoma and an M.B.A. from Harvard Business School.

Bill Arendt Research Fellow, Emerald Kalama Chemical LLC

Bill Arendt is a Research Fellow with Emerald Kalama Chemical, LLC. For the last forty years with Emerald Kalama, Genovique Specialties and Velsicol Chemical, he has focused on new and existing plasticizer, application development and technical support. Bill has presented numerous papers at ASC conventions on plasticizers and has made numerous presentations at ASC short courses and webinars on plasticizer technology. In addition, he has also presented papers to other societies on coatings, PVC, caulk, polyurethanes and other technologies. He has 15 US patents and has several patents pending. He is an Honored Fellow of the Society of the SPE, and is a Vice President of the SPE. He is active in ASTM C24 and D01 and American Coating Society. Also Bill is a member of the ACS. Bill has six sons and grandsons and is a civil war buff.

Ying Bai PhD Candidate, Lehigh University

Ying Bai is currently a PhD candidate in the Department of Chemical Engineering at Lehigh University. He’s research focuses on designing and modification of mechanical properties by bio-inspired surface textures. He received both his Master’s and Bachelor’s degree in Department of Chemical Engineering at Tsinghua University, China.

23 2013 Spring Convention and EXPO Final Program

Speakers Alexander Bakken Research Assistant, Purdue Nuclear Engineering

Alexander Bakken is a graduate researcher with Purdue University’s Metastable Fluids and Advanced Research Laboratory (MFARL) in Prof. Taleyarkhan’s research group and is currently (in collaboration and sponsorship from S/A Labs., LLC) is researching ionizing particle tailored biopolymers with a focus on PLA based adhesives and coatings. The research recently won 1st Prize in the annual State of Indiana Soy-Corn Innovation Competition.

John Beagle Managing Director, Grace Matthews Inc.

John L. Beagle, co-founder and Managing Director, leads Grace Matthews chemicals investment banking group. Prior to working in investment banking, John was a research engineer in Digital Equipment Corporation’s Advanced Semiconductor Development group (Hudson, MA). John was part of the R&D effort at Digital that developed the patented Alpha chip technology, which at the time was the fastest commercially available microprocessor ever engineered. John received his B.S. in Materials Science and Engineering and his M.B.A. from the Johnson Graduate School of Management, both at Cornell University.

Louis Bloomfield Professor and Associate Chair of Physics, University of Virginia

Lou Bloomfield is Professor and Associate Chair of Physics at the University of Virginia, where he has been since 1985. He received his Physics Ph.D. from Stanford in 1983 and was a post doctoral at AT&T Bell Labs 1983-85. After 30 years of basic research, most recently on the magnetic and electronic structures of atomic clusters, Bloomfield has changed paths to work on time-dependent polymer systems and their applications. He has always enjoyed tinkering with ordinary things and, since 1991, has taught “How Things Work,” an innovative introduction to physics and science in the context of everyday objects, to almost 10,000 undergraduates at University of Virginia. Bloomfield appears often on science television, including a year as co-host of a series on the Discovery Channel. He will teach How Things Work as a MOOC (massive online open course) this spring on Coursera.org.

2013 Spring Convention and EXPO Final Program 24

David Constable ESH & Sustainability Professional, Sustainability Foresights, LLC

From the end of September, 2011 until January, 2013, David worked as the owner and principal at Sustainability Foresights, LLC. David left Lockheed Martin as the Corporate Vice President of Energy, Environment, Safety & Health (ESH) at the end of September 2011. Prior to joining Lockheed Martin, he was the Director of Operational Sustainability in the Corporate Environment, Health, and Safety Department at GlaxoSmithKline. He first joined SmithKline Beecham, a predecessor to GlaxoSmithKline, in 1991, and worked in the company’s Environmental Research Laboratory. Prior to joining SmithKline Beecham, he served as a Group Leader in the SHEA Analytical Services Group of ICI Americas.

Alfred Crosby Professor, Department of Polymer Science and Engineering, University of Massachusetts Amherst

Dr. Crosby is a Professor in the Polymer Science & Engineering Department at the University of Massachusetts Amherst. Crosby received his B.S. degree in Civil Engineering and Applied Mechanics at the University of Virginia in 1996 and his Ph.D. in Materials Science and Engineering at Northwestern University in 2000. He was awarded a National Research Council Research Fellowship in 2000 to conduct his postdoctoral research in the Polymers Division at the National Institute of Standards and Technology. In 2002, he joined the faculty at UMass and has received many awards for his research, including the NSF CAREER Award, the ARO Young Investigator Award, the Adhesion Society Outstanding Young Scientist Award, the Rohm & Haas New Faculty Award, and the ACS Rubber Division’s SparksThomas Award.

David Duke Managing Director, Cary Street Partners - Industrials Investment Banking

David Duke is a Managing Director out of Cary Street Partners’ Atlanta office. He joined in 2012 and is focused on serving middle market industrial technology and manufacturing businesses, with a particular emphasis on specialty chemicals and materials. Prior to joining Cary Street Partners, he was a Co-Founder of FD Capital Advisors, the investment banking affiliate of Frazier and Deeter, a top 100 CPA firm. He was previously a Principal at Headwaters MB. Prior to his time at Headwaters, David was Vice President with Synovus Investment Banking, a subsidiary of Synovus Financial Corporation (NYSE: SNV). Before joining Synovus, he was Vice President of SunTrust Banks. Previously, David ran his own corporate finance advisory firm, Vance Advisory. He also held various investment banking positions with EquiPlace Securities, GMA Partners, and Jacobs 25 2013 Spring Convention and EXPO Final Program

Speakers Capital. David is a graduate of James Madison University and holds an MBA from the Katz Graduate School of Business at the University of Pittsburgh.

Mark Duvall Principal, Beveridge & Diamond, P.C.

Mark Duvall is a principal with Beveridge & Diamond, P.C. Mark heads the firm’s TSCA practice. He has extensive experience with all aspects of TSCA, including regulatory compliance counseling, rulemaking, enforcement actions, and advocacy. Mark formerly served as in-house counsel for major chemical companies. He leads the firm’s TSCA Dialogue Group, an informal group of companies and related trade associations from multiple industries and across the value chain that are interested in TSCA legislative developments and TSCA implementation. Mark also heads the firm’s OSHA and FDA practices, and works regularly on issues relating to pesticides, consumer products, green marketing, FIFRA, nanotechnology, and biotechnology.

Alejandro Esquivel Technical Service Engineer, Dynasol, LLC

Dr. Esquivel is Senior Specialist at Dynasol, and has 26 years of experience in rubber technology (emulsion and solution) within our group, is an expert on adhesives, specifically on PSA’s. Dr. Alejandro Esquivel has Ph.D. and Chemical Engineer degrees from the Technological Institute of Ciudad Madero (Tamaulipas, México). Dr. Esquivel has specialization in polymer chemistry, and adhesives from Akron University (USA), McMaster University, and from ITESM (Mexico). Dr. Esquivel is the author of a number of scientific articles and is of several patents related to synthetic rubber applications and thermoplastic rubber compounding.

Michael Famiglietti Technical Service Manager, Cabot Corporation

Michael has been with Cabot Corporation’s Performance Materials Business for the past 15 years. Over that time he has held different positions within R&D, Application Development, New Business Development and Technical Service organizations. Michael has broad experience in the surface modification of fine particles and their dispersion in wide-ranging formulations to enhance final formulation properties. In his current role as Technical Service Manager one of Michael’s key areas of concentration is fumed silica and carbon black materials for the enhancement of adhesive and sealant properties. Michael holds a B.S. in Chemical Engineering from Tufts University and an M.B.A. from the F.W. Olin School of Business at Babson College. 2013 Spring Convention and EXPO Final Program 26

Martin Feng Principal Scientist, FPInnovations Wood Products Division

Martin Feng is a principal scientist and project leader at FPInnovations, Canada’s forest product research institute. He is also an adjunct professor in the faculty of forestry, University of Toronto. He holds a Bachelor degree in polymer chemistry and a Master degree in organic chemistry, and has about 28-year experience in industrial research and development. He is specialized in wood adhesives and their applications in wood composite products manufacturing. His research activities include the applications of renewable biomaterials and nanomaterials, such as nanocrystalline cellulose, carbon nanotubes, lignin, bark extractives, etc.

Paul Hodges Chairman, International eChem

Paul Hodges is chairman of International eChem and a trusted adviser to the global chemical industry and its investment community. Paul founded International eChem in 1995 and has strong professional relationships with the leading players. He is also non-executive chairman of NiTech Solutions Ltd, a young spin-out company from Heriot Watt University, Scotland. Previously, Paul spent 17 years as a senior executive at ICI - both in the UK and the US, where he held senior executive positions in petrochemicals and chloralkali. Paul is a graduate of the University of York, and subsequently studied with the IMD business school in Switzerland.

Jim Jones Acting Assistant Administrator, U.S. Environmental Protection Agency

In January 2012, President Obama nominated Jim Jones to be the Assistant Administrator for EPA’s Office of Chemical Safety and Pollution Prevention (OCSPP). He is responsible for managing the office which implements the nation’s pesticide, toxic chemical, and pollution prevention laws. From April through November 2011, Jim served as the Deputy Assistant Administrator for EPA’s Office of Air and Radiation. From January 2007 until April 2011, Jim served as the Deputy Assistant Administrator for OCSPP, including six months as Acting Assistant Administrator. From 2003-2007, Jim served as the Director of the Office of Pesticide Programs. He has an M.A. from the University of California at Santa Barbara and a B.A. from the University of Maryland, both in Economics.

27 2013 Spring Convention and EXPO Final Program

Speakers Corey King Manager, Technical Service and Business Development, Crosslinkers, Evonik Corporation

Corey King has a B.S. in Chemical Engineering from Tulane University and a Ph.D. in Polymer Science and Engineering from the University of Southern Mississippi. Corey has worked with Evonik in Business Line Crosslinkers for almost 12 years and is responsible for technical service and business development for all of the Crosslinker product lines for North America including the VESTANAT® diisocyanates, VESTAMIN® diamines, VESTAGON® powder coating crosslinkers and VESTASOL® solvents.

Christian Kastrup Assistant Professor, University of British Columbia

Dr. Kastrup is an Assistant Professor in the Michael Smith Laboratories and Department of Biochemistry & Molecular Biology at the University of British Columbia. He is a member of the Centre for Blood Research and an associate member of the Biomedical Engineering Program. He did his postdoctoral fellowship in Professor Robert Langer’s laboratory at MIT (2008-2011), where he specialized in engineering biomaterials for drug delivery. He received his PhD in Chemistry from the University of Chicago (2003-2008), working with Professor Rustem Ismagilov, where he specialized in chemical biology, microfluidics, and blood coagulation. Dr. Kastrup has received awards to include the Cozzarelli Prize from the National Academy of Sciences and the Rising Stars in Global Health Award from Grand Challenges Canada.

Jeffery Li Zhen Vice President/Deputy General Manager, Jinhai Deqi Chemical

Li Zhen joined Ningbo Jinhai Deqi Chemical & Industry Co. Ltd in 2006, where he acted as Deputy General Manager for business development, marketing and customer technical service. He graduated from Beijing Research Institute of Chemical Industry with a M.S. in Organic Chemical Engineering, and Nankai University with B.S in chemistry. Mr. Li has had various technical, business development, commercial and management positions with multinational companies. This includes working in senior operating positions with Sino-MNC joint venture projects supplying performance chemicals to international markets.

2013 Spring Convention and EXPO Final Program 28

Stephany Mason Vice President, VOC Materials Testing, Eurofins Air Toxics, Inc.

Dr. Mason is responsible for promotion and demonstration of expertise in chamber testing, product emissions, and indoor air quality (IAQ), providing scientific leadership in these areas. Dr. Mason is an expert on techniques and research methodologies related to product chemical emissions and indoor air quality (IAQ), including testing for both US and international regulations, certifications, and testing schemes. She has a B.S. in from the University of Illinois at Urbana-Champaign, an M.S.E. in Materials Science and Engineering from the University of Pennsylvania, and a PhD from Columbia University.

Jeff Moser Business Development Manager Bonding Solutions, A.RAYMOND TINNERMAN INDUSTRIAL, Inc.

Jeff Moser leads the North American market for Raybond; a business unit of the global A. Raymond Group. He joined A Raymond Tinnerman Bonding Solutions after a 20 year career in strategic marketing and business development with Dow Chemical and BASF. Jeff also founded West Branch LLC, a private consulting practice providing strategic insight to clients in industry and investing fields. Mr. Moser holds degrees in Mechanical Engineering and an MBA in Marketing.

David Nicastro Chief Executive Officer, Building Diagnostics

David H. Nicastro, P.E., F.ASTM, is a licensed professional engineer specializing in the durability of building materials, performing original research, analyzing existing buildings, and designing remedies for the conditions studied. He is the founder of Engineering Diagnostics, Inc. (EDI); Building Diagnostics, Inc. (BDI); and The Durability Lab, a testing center housed at The University of Texas at Austin to study the durability of building components, identifying factors causing premature failure. Mr. Nicastro is the past chairman of ASTM Committee C24 on Building Seals and Sealants, and has published over 50 articles and books on durability and failure of building materials.

29 2013 Spring Convention and EXPO Final Program

Speakers Dave Nick President/CEO, DPNA International, Inc.

David Nick is the founder of DPNA International, Inc. He has authored numerous market study reports for the ASC and produced proprietary and global multi-client market studies covering the adhesive, sealant, coatings and ink industries. Mr. Nick has more than 35 years of experience in the specialty chemicals industry. He began his career at Lord Corporation as an R&D chemist and later as International Chemicals Manager. His last corporate assignment was Manager, International Division of the Caroline Company. Mr. Nick started his consulting practice in 1991. His unparalleled global contacts in the industry include raw material suppliers, users, formulators and specifiers.

Nellie Perry Vice President, C5 Monomers and Polymers, Argus DeWitt

Nellie A. Perry worked for The Procter and Gamble Company for 8 years, where she held variety of Management positions in their Global Purchasing Organization. These positions included North America Strategy Owner for Stretch Diaper Components, Global Strategy Owner for Hygiene Hot Melt Adhesives; and Strategy Owner for Polypropylene and Polyethylene Resins used in Hygiene Consumer Products. She graduated from the University of Florida with a M.S. in Decision and Information Sciences, Supply Chain Concentration; B.S. in Biochemistry; B.E. in Chemical Engineering. Nellie joined T.A. Brewer Consulting in 2011 and Argus Media Inc. in 2013 to broaden their knowledge and enhance their ability to service their clients in the area of C5 Chemicals and Polymers.

Mark Piggott Senior Account Manager, Arkema Coating Resins

Mark Piggott received his BSc in chemistry from University of Glamorgan in United Kingdom. He is currently based at Arkema Coating Resins facility in Kansas City and provides support for organowax rheology modifiers to the North American market. Prior to his US transfer in 2001, he worked for 14 years at Cray Valleyâ&#x20AC;&#x2122;s UK technical center on a range of chemistries and applications. These included rheological modifiers for coating and non-coating applications, polyamides for printing inks and as curing agents for 2K epoxy, polyester for can and coil coatings, acrylic polyol for 2K polyurethane coatings.

2013 Spring Convention and EXPO Final Program 30

Ram Ramalingam, Technical Director, Henkel Corporation B. (Ram) Ramalingam is technical director for product development at Henkel Corporation. Over the last 20 years he has focused his efforts on polyurethanes, epoxy resins, energy cure products and flexible packaging.

George Ritter Principal Engineer, Materials, Edison Welding Institute (EWI)

Dr. George Ritter has over thirty years industrial experience and specializes in composites, plastics, adhesives bonding systems, and processes related to joining of plastics-to-metals and polymer welding. His current focus is on compositesto-metals bonding with adhesives, advanced thermoplastic welding; weld bonding of metal structures, and applications of structural adhesives in aerospace, automotive, and medical device manufacturing.

Hassan Rmaile Chief Innovation and Technology Officer, H.B. Fuller

Hassan H. Rmaile joined HB Fuller in October 2012. He previously served in different business and technology roles at Ashland Specialty ingredients, a commercial unit of Ashland Inc. Before joining HB Fuller, he was Vice President of R&D Platforms at Ashland Specialty Ingredients. He earned a Ph.D. in Chemistry from the Florida State University and an MBA from the University of Delaware.

Michael Schmeida Divisional Manager-Sustainability & Government/Regulatory Affairs, Tremco Incorporated

Mr. Schmeida has been in-charge of Sustainability for Tremco Commercial Sealants and Waterproofing (CS&W) in Beachwood, Ohio since early-2008. Before that he was Product Manager and prior still in the Technical Services Group. He has been a LEED AP for 8 years and leading the divisionâ&#x20AC;&#x2122;s sustainable programs even before assuming the role full-time. Under Mr. Schmeidaâ&#x20AC;&#x2122;s guidance, CSW is leading the industry in green standards and policy development, embracing sustainability in its business practices and working to be a leader in sustainable design. He has been a featured speaker and author over two-dozen times, addressing local, regional and national groups such as California DTSC, Congressional Caucuses and now ASC five times, serves as Vice-Chair of ASTM E60 and is the Co-Chair of 31 2013 Spring Convention and EXPO Final Program

Speakers ASCâ&#x20AC;&#x2122;s Government Relations Committee. He also teaches at his twotime alma mater, The University of Akron, on sustainability and green marketing and is a volunteer in the community in the Akron-area.

Erin Shaffer VP Federal Outreach, Green Building Initiative

Erin Shaffer is a consultant to the Green Building Initiative in charge of outreach to Federal Agencies and the business community. Erin educates diverse stakeholders and lawmakers to the benefits of Green Globes and the Guiding Principles Compliance Certification programs. Prior to representing GBI, she directed public affairs operations for a Fortune 30 company developing company environment-related policy positions and directing related strategic advocacy work. Ms. Shaffer served as the Director of State Programs at the U.S. EPA, Office of Toxic Substances, where she focused on multi-pathway exposure to pollutants. Ms. Shaffer served as staff to Senator Max Baucus (D-MT), Senator Henry Jackson (D-WA) and is a licensed attorney.

Calvin Shen Senior Technical and Market Development Manager, Kaneka North America

Calvin Shen is a Senior Technical and Market Development Manager in the High Performance Polymer Division at Kaneka North America in Pasadena, Texas. Prior to joining Kaneka, Calvin had held R&D and technical positions with ARCO Chemical Company (now Bayer Material Science) and Huntsman Polyurethanes. Both positions involved the development of polyols, isocyanates and prepolymers for applications in CASE (coatings, adhesives, sealants, and elastomers). Calvin received his Ph.D. degree from The University of Akron.

Aaron Smith Director of Sustainability, ASSA ABLOY Door Security SolutionsÂŽ

Aaron Smith is Director Sustainable Building Solutions for ASSA ABLOY, the global leader in door opening solutions. He is responsible for maximizing business opportunities for ASSA ABLOY products that deliver energy efficiency and sustainability for green buildings. Aaron also serves on the Board of Wolf Ridge Environmental Learning Center and the Health Product Declaration Collaborative.

2013 Spring Convention and EXPO Final Program 32

Kevin Smith HQMC, Installations & Logistics, (LPS), Logistics Plans, Policies, and Strategic Mobility Branch (South)

Kevin has earned a Bachelor of Science degree in Human Resource Management from Park University and a Master of Science in Administration from Central Michigan University. At the University of San Diego, he earned his Lean Six Sigma Black Belt. Likewise, Kevin accomplished his Marine Corps Logistics, Supply Chain Management certification at Penn State University. He was President of the National Institute of Packaging from 2010-2012. He currently serves on the Executive Board of Directors of NIPHLE, the Total Lifecycle Management Corporate Board (TCB) United States Marine Corps and Packaging Advisory Board, Cal Poly State University.

John Televantos Partner, Arsenal Capital Partners

John Televantos is a Partner at Arsenal Capital Partners, a middle market private equity firm focused on the specialty industrial, healthcare and specialty financial service sectors. Before joining Arsenal in 2006, Dr. Televantos was President of Aqualon Company, owned by Hercules, Inc.; President and Founder of Helios Chemical Company; and Chief Executive Officer for Foamex International. John began his career with Union Carbide in 1977 in silicones research. At ARCO Chemical, John became vice president of strategy and development where he co-invented and led a team that developed and commercialized a breakthrough technology in polyol manufacture. John holds BS and PhD degrees in chemical engineering from the University of London.

Iris Thomas Cheertainer Bag-In-Box Product Manager, CDF Corporation

In her current role as Product Manager of the Cheertainer bag-in-box product line, Iris is responsible for the development and growth of the Cheertainer brand in North America and the subsequent coordination with CDFâ&#x20AC;&#x2122;s European business affiliate. Her current business goals are to increase awareness of the benefits of flexible packaging and to increase Cheertainerâ&#x20AC;&#x2122;s market share in North America. Iris is working closely with the beverage, chemical and petroleum markets. Iris is a frequent speaker at industry trade events on a variety of topics, including flexible packaging for liquids - from packaging concept to filling and delivery. Most recently, Iris has addressed the Petroleum Packaging Council and the Packaging Alliance Network.

33 2013 Spring Convention and EXPO Final Program

Speakers George Thompson President & CEO, Chemical Compliance Systems, Inc.

George Thompson received his Ph.D. in toxicology/ pharmacology in 1969. After 14 years experience in industrial research and management of hazard assessments, environmental evaluations, medical compliance, product development, chemical research, and safety/health computerization, Dr. Thompson founded two precursor companies and Chemical Compliance Systems, Inc. (CCS). The past 25 years of program evaluation and implementation strategies have drawn upon both Dr. Thompson’s [1] broad based technical qualifications (he has published 21 hazardous chemical books, 39 technical/ research articles, hosted two worldwide and two national safety/health conferences, trained over 10,000 employees, and given hundreds of technical and management. Dr. Thompson’s 40 years of broad based experience has also included negotiations with regulatory agencies and has extended to participation in the legal arena as an expert witness for cases involving hazardous chemicals, or safety/health/environmental issues.

Jeffrey Timm Managing Principal, Timm Consulting

Jeff Timm is an independent consultant and former Business Development Executive with diverse experience in domestic and international (primarily Asia) B2B sales and marketing in the plastics, bioplastics and adhesives industries. A career long focus and experience around packaging markets including adhesives, film (substrates, tie-layers, lidding and coatings) and rigid plastic packaging (thermoformed and blow molded) materials, biopolymers, adhesives, labels, tapes, recycling markets, plastic additives and paper/ plastic coatings for a variety of end-use applications has allowed Jeff to experience a number of business cycles lending an historical perspective to his innovative approach to business development. Currently Jeff writes the Packaging Blog for Adhesives.org, the web portal for the ASC.

Patrick Trippel Senior Vice President Construction Materials, H.B. Fuller

Pat Trippel is senior vice president for H.B. Fuller Company. Pat joined H.B. Fuller from Henkel in 2011, where he most recently served as senior vice president and general manager of Henkel Corporation’s Global General Industries business. From 2002 until 2009, he served as the President and General Manager of Henkel’s Global Electronic Materials business. Pat earned a bachelor’s degree in Industrial Engineering from Purdue University and has completed executive development programs at Harvard University, Duke University, University of Chicago, IMD in Switzerland and IESE in Spain. 2013 Spring Convention and EXPO Final Program 34

Wayne Trusty President, Wayne B. Trusty & Associates Limited

Wayne Trusty has a Masters degree in economics and more than 40 years of experience in such diverse fields as resource industry economics and policy, water resources, transportation, energy policy and markets, and regional development. He is Past President of the Athena Sustainable Materials Institute and Athena Institute International, an Adjunct Associate Professor, University of Calgary Faculty of Environmental Design, and chair of the ASTM working group on whole building LCA. Wayne also served as Chair of the Technical Committee established in the U.S. to take the Green Globes rating system through a full American National Standards Institute process and served for many years on the LEED Resources and Materials Technical Advisory Group in the United States, as well as on the Metrics and Life Cycle Assessment task force for the Canadian Green Building Council.

Kamesh Vyakaranam Associate Scientist, Dow Chemical Company

Kamesh Vyakaranam earned his Ph.D. in Chemistry from Northern Illinois University and went on to do a Post-Doc in University of Colorado at Boulder in Polymer Chemistry. Before joining The Dow Chemical Company - Freeport in 2007, he did a short internship in Germany. For the past four years in Dow - Freeport TX, he has been working in the area of Thermosets R&D for a variety of applications ranging from electronics to adhesives and sealants.

John Warner President and Chief Technology Officer, Warner Babcock Institute for Green Chemistry, LLC

John received his BS in Chemistry from UMASS Boston, and his PhD in Chemistry from Princeton University. After working at the Polaroid Corporation for nearly a decade, he then served as tenured full professor at UMASS Boston and Lowell. In 2007, John founded the Warner Babcock Institute for Green Chemistry, LLC (A research organization developing green chemistry technologies) where he serves as President and Chief Technology Officer, and Beyond Benign (a non-profit dedicated to sustainability and green chemistry education). He has published over 200 patents, papers and books. Warner received the 2004 Presidential Award for Excellence in Science Mentoring, the American Institute of Chemistry’s Northeast Division’s Distinguished Chemist of the Year for 2002 and the Council of Science Society President’s 2008 Leadership award.

35 2013 Spring Convention and EXPO Final Program

Speakers Christopher White Acting Group Leader, Polymeric Materials Group, National Institute of Standards and Technology

Dr. White joined NIST in 1997 as a National Research Council Postdoctoral Research Associate. Prior to joining NIST, Dr. White was honored by receiving a University of Connecticut/Institute of Materials Science Post-doctoral fellowship where he worked on the specific interactions between extender and matrix and the effects on the rheology of recycled plastic materials. Dr. White was awarded a Ph.D. from the University of Wisconsin in 1994. He has received many awards such as the prestigious E.I. Dupont Rheology Award in 1994. He has published numerous peer reviewed papers and conference proceedings. He has served as a reviewer for numerous journals including: Journal of Rheology, Journal of Polymer Science, Part B Polymer Physics, Journal of Engineering Materials Science and Technology, Journal of Polymer Science and Engineering.

Richard Wool Professor of Chemical and Biomolecular Engineering, University of Delaware

Dr Wool is a Professor of Chemical and Biomolecular Engineering at the University of Delaware, former Director of the Center for Composite Materials and current Director of the ACRES (Affordable Composites from Renewable Resources) Program at the University of Delaware. He is author of the books “BioBased Polymers and Composites” (with X.S. Sun) and “Polymer Interfaces: Structure and Strength”. Professor Wool is a Fellow of the American Physical Society, Division of Polymer Physics and the Chairman of the Gordon Research Conference on Composites. He received the Affordable Green Chemistry Award from the American Chemical Society and the Lifetime Achievement Award from the Bio-Environmental Polymer Society in Vienna, 2011. Dr Wool is the CEO and Founder of Crey Bioresins of Newark Delaware. He has a BS in Chemistry from University College Cork, Ireland and a PhD in Materials Science and Engineering from the University of Utah.

Xiaolin Zheng Assistant Professor, Stanford University

Xiaolin Zheng is an Assistant Professor of Mechanical Engineering at Stanford University. She received her Ph.D. in Mechanical & Aerospace Engineering from Princeton University (2006), B.S. in Thermal Engineering from Tsinghua University (2000). Prior to joining Stanford in 2007, she did her postdoctoral work in the Department of Chemistry and Chemical Biology at Harvard University. She is a member of MRS, ACS and the Combustion Institute. She received the Presidential Early Career Award (PECASE) from the White House (2009), Young Investigator Awards from the ONR (2008), DARPA (2008), Terman Fellowship from Stanford (2007), and Bernard Lewis Fellowship from the Combustion Institute (2004). 2013 Spring Convention and EXPO Final Program 36

ASC’s Training Academy offers convenient technical webinars to support and enhance your company’s Adhesives & Sealants knowledge. Academy webinars provide content to both technical and non-technical personnel to teach and support the fundamentals and basics of adhesion and sealing technologies.

Corporate and multi-seat options are available to maximize training participation and minimize cost for your company.

Sign Your Team Up for These Critical Webinars:

• Adhesives 101

May 8 + 15, 2013 (Two Part Series)

• GHS 101 June 12, 2013 • Adhesives in Packaging 101 July 10, 2013

• Additives 101

September 18, 2013 Webinars for the A&S Industry

BD = Business Development & Market Trends Track T/GR = Technical & Government Regulations Track NT/A = New Technology & Application Track

Monday, April 22 Morning Education Sessions by Time Slot 9:15 to 10:00 a.m. BD: Emerging Raw Material Supply from China Nellie Perry, Vice President, C5 Monomers and Polymers, Argus DeWitt Dunwoody, Atlanta Conference Center (LL3) T/GR: Dibenzoate Plasticizersâ&#x20AC;&#x2122; Use in Sealants: Polysulphide 2K Insulating Glass and Silyl Terminated Polyether Sealants Bill Arendt, Research Fellow, Emerald Kalama Chemical LLC Courtland, Atlanta Conference Center (LL3) NT/A: Will Adhesive Bonding Ever Replace Mechanical Fastening? Dave Nick, President/CEO, DPNA International, Inc. Baker, Atlanta Conference Center (LL3)

10:00 to 10:30 a.m. â&#x20AC;&#x201C; BREAK 10:30 to 11:00 a.m. T/GR: Using Superior Dispersion and Surface Chemistry of Fumed Silica to Improve Adhesive Performance Michael Famiglietti, Technical Service Manager, Cabot Corporation Courtland, Atlanta Conference Center (LL3)

10:30 to 11:15 a.m. BD: Tackifiers from China Jeffery Li Zhen, Vice President/Deputy General Manager, Jinhai Deqi Chemical Dunwoody, Atlanta Conference Center (LL3) NT/A: Trends and Future Prospects in Materials Joining Technologies George Ritter, Principal Engineer, Materials, Edison Welding Institute (EWI) Baker, Atlanta Conference Center (LL3)

11:00 to 11:30 a.m. T/GR: Multi-arm Copolymers for PSA Optimization Alejandro Esquivel, Technical Service Engineer, Dynasol, LLC Courtland, Atlanta Conference Center (LL3)

11:15 to Noon BD: The Impact of the Central Banks Stimulus Programmes on Oil Markets Paul Hodges, Chairman, International eChem Dunwoody, Atlanta Conference Center (LL3) NT/A: Lean Manufacturing with Structural Adhesives Jeff Moser, Business Development Manager - Bonding Solutions, A.RAYMOND TINNERMAN INDUSTRIAL, Inc. Baker, Atlanta Conference Center (LL3)

11:30 to Noon T/GR: Getting More for Less - New Bio-Based Rheological Additives for Low Temperature Process Mark Piggott, Senior Account Manager, Arkema Coating Resins Courtland, Atlanta Conference Center (LL3)

LEGEND:

D=B B usiness Development & Market Trends Track T/GR = Technical & Government Regulations Track NT/A = N ew Technology & Application Track

39 2013 Spring Convention and EXPO Final Program

Monday, April 22 Afternoon Education Sessions by Time Slot 1:15 to 2:00 p.m. BD: M&A Drivers in the Adhesives and Sealants Value Chain John Beagle, Managing Director, Grace Matthews Inc. Dunwoody, Atlanta Conference Center (LL3) NT/A: EPD 101: What, Why and How Wayne Trusty, President, Wayne B. Trusty & Associates Limited Baker, Atlanta Conference Center (LL3)

1:15 to 1:45 p.m. T/GR: Green Globes New Construction - the Next Generation Erin Shaffer, VP Federal Outreach, Green Building Initiative Courtland, Atlanta Conference Center (LL3)

1:45 to 2:30 p.m. T/GR: LEED V.4- Update on the Impact on Sealants and Adhesives Michael Schmeida, Divisional Manager-Sustainability & Government/ Regulatory Affairs, Tremco Incorporated Courtland, Atlanta Conference Center (LL3)

2:00 to 2:45 p.m. BD: A Profile of Who is Buying; Who is Selling and What Trends will Drive the Future & What is Attractive for Private Equity John Televantos, Partner, Arsenal Capital Partners Dunwoody, Atlanta Conference Center (LL3) NT/A: Key Learning’s from the Door and Hardware Industry on Product Transparency Aaron Smith, Director of Sustainability, ASSA ABLOY Door Security Solutions® Baker, Atlanta Conference Center (LL3)

2:30 to 2:45 p.m. – BREAK: T/GR 2:45 to 3:00 p.m. – BREAK: BD & NT/A 2:45 to 3:30 p.m. T/GR: GreenSuite® Alternative Assessments of Chemicals, Products, and Processes George Thompson, President & CEO, Chemical Compliance Systems, Inc. Courtland, Atlanta Conference Center (LL3)

3:00 to 3:45 p.m. BD: A Look at Valuation Techniques David Duke, Managing Director, Cary Street Partners - Industrials Investment Banking Dunwoody, Atlanta Conference Center (LL3)

3:00 to 4:00 p.m. NT/A: Importance of Service Life Prediction Metric in PCR Development for Sealants Christopher White, Acting Group Leader, Polymeric Materials Group, National Institute of Standards and Technology Baker, Atlanta Conference Center (LL3)

3:30 to 4:00 p.m. T/GR: New Technologies for Rapid Assessment of Adhesive and Sealant Chemical Impacts Stephany Mason, Vice President, VOC Materials Testing, Eurofins Air Toxics, Inc. Courtland, Atlanta Conference Center (LL3)

3:45 to 4:30 p.m. BD: Best Practices in Post-Merger Integration Patrick Trippel, Senior Vice President Construction Materials, H.B. Fuller Dunwoody, Atlanta Conference Center (LL3) 2013 Spring Convention and EXPO Final Program 40

Tuesday, April 23 Morning Education Sessions by Time Slot 9:15 to 10:00 a.m. BD: Trends in Green Chemistry & Business Impacts David Constable, Director, ACS Green Chemistry Institute Dunwoody, Atlanta Conference Center (LL3) T/GR: Faster Curing and Higher Strength Applications with New Silane Terminated Polyether Product Technology Calvin Shen, Sr. Technical & Market Development Manager, Kaneka North America LLC Courtland, Atlanta Conference Center (LL3) NT/A: Looking Beyond Fibrils: Evolution Guided Polymer Adhesion Alfred Crosby, Professor, Department of Polymer Science and Engineering, University of Massachusetts Amherst Baker, Atlanta Conference Center (LL3)

10:00 to 10:15 a.m. â&#x20AC;&#x201C; BREAK: BD & NT/A 10:00 to 10:30 a.m. T/GR: VOC Free, High Performance PU Adhesives for CO2 Based Polycarbonate Polyols Jason Anderson, Director, CO2 Strategy & Business Development, Novomer, Inc. Courtland, Atlanta Conference Center (LL3)

10:15 to 10:45 a.m. NT/A: A Catechol-Based Intravascular Adhesive That Coats and Treats Atherosclerotic Plaques Christian Kastrup, Assistant Professor, University of British Columbia Baker, Atlanta Conference Center (LL3)

10:15 to 11:15 a.m. BD: Enabling Downstream Sustainability through Adhesives Design Hassan Rmaile, Chief Innovation and Technology Officer, H.B. Fuller Dunwoody, Atlanta Conference Center (LL3)

10:30 to 11:15 a.m. T/GR: Benefits of Aliphatic Diisocyanates (ADI) and their Derivatives in Thermoplastic Materials Corey King, Manager, Technical Service and Business Development, Crosslinkers, Evonik Corporation Courtland, Atlanta Conference Center (LL3)

10:45 to 11:30 a.m. NT/A: Viscoelastic Silicone Rubber as a Closure Adhesive and Adaptive Sealant Louis Bloomfield, Professor and Associate Chair of Physics, University of Virginia Baker, Atlanta Conference Center (LL3)

11:15 a.m. to Noon BD: Green Chemistry Opportunities in Sustainable Adhesives and Polymer Composites Richard Wool, Professor of Chemical and Biomolecular Engineering, University of Delaware Dunwoody, Atlanta Conference Center (LL3) T/GR: Novel Moisture Curable Silane Modified Polymers Kamesh Vyakaranam, Associate Scientist, Dow Chemical Company Courtland, Atlanta Conference Center (LL3)

LEGEND:

D=B B usiness Development & Market Trends Track T/GR = Technical & Government Regulations Track NT/A = N ew Technology & Application Track

41 2013 Spring Convention and EXPO Final Program

Tuesday, April 23

11:30 a.m. to Noon NT/A: Transfer Printing Nanowire Electronic Devices on non-Si Substrates Xiaolin Zheng, Assistant Professor, Stanford University Baker, Atlanta Conference Center (LL3)

AFTERNOON Education Sessions by Time Slot 2:45 to 3:15 p.m. BD: Sustainability and VOC Free Polyurethanes Ram Ramalingam, Technical Director, Henkel Corporation Dunwoody, Atlanta Conference Center (LL3) T/GR: South Coast Air Quality Management District Revision of Rule 1168 Update Mark Collatz, Director, Regulatory Affairs, Adhesive and Sealant Council Courtland, Atlanta Conference Center (LL3)

2:45 to 3:30 p.m. NT/A: Nanocrystalline Cellulose (NCC) – Properties and Applications Martin Feng, Principal Scientist, FPInnovations - Wood Products Division Baker, Atlanta Conference Center (LL3)

3:15 to 3:45 p.m. BD:

ame-changing Trends in the Packaging Market G Jeffrey Timm, Managing Principal, Timm Consulting Dunwoody, Atlanta Conference Center (LL3)

3:15 to 4:00 p.m. T/GR: T SCA Reform Legislation Mark Duvall, Principal, Beveridge & Diamond, P.C. Courtland, Atlanta Conference Center (LL3)

3:30 to 4:15 p.m. NT/A: P oly Lactic Acid-Based Green Hotmelt Adhesive Alexander Bakken, Research Assistant, Purdue Nuclear Engineering Baker, Atlanta Conference Center (LL3)

3:45 to 4:15 p.m. BD:

lexible Packaging Solutions for Chemical Manufacturers F Iris Thomas, Cheertainer Bag-In-Box Product Manager, CDF Corporation Dunwoody, Atlanta Conference Center (LL3)

4:00 to 4:30 p.m. T/GR: C alifornia’s Safer Consumer Products Rules Mark Duvall, Principal, Beveridge & Diamond, P.C. Courtland, Atlanta Conference Center (LL3)

4:15 to 4:45 p.m. BD:

ptimizing Packaging Solutions for today’s War Fighter O Kevin Smith, HQMC, Installations & Logistics, (LPS), Logistics Plans, Policies, and Strategic Mobility Branch (South) Dunwoody, Atlanta Conference Center (LL3)

4:15 to 4:45 p.m. NT/A: S electivity of Adhesion and Control of Friction by Near-Surface Patterning Ying (Richard) Bai, PhD Candidate, Lehigh University Baker, Atlanta Conference Center (LL3) 2013 Spring Convention and EXPO Final Program 42

One World-Class Team Just Got Stronger H.B. Fuller has become stronger than ever, creating one team that delivers an expansive selection of high-performance emulsion polymer solutions. As part of our continuing strategy to deliver an unparalleled portfolio of polymer products and solutions, we proudly welcome Forbo polymers to the H.B. Fuller family. By combining the vast knowledge and experience behind these two polymer lines and legacies, your new H.B. Fuller team has greatly strengthened its position as your premier polymer supplier. This combination will expand the performance and innovation capabilities for all of your polymer needs. Discover the new strengths that our team has to offer. Call today 888-HBFULLER or visit us at www.hbfuller.com.

Our Focus is Clear. Perfecting Adhesives.